[PATCH] gxfb: Turn on the flatpanel power and data
For Geode devices without a flatpanel aware BIOS, this enables the flatpanel
power and data.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c
index bee0741..7f3f18d 100644
--- a/drivers/video/geode/video_gx.c
+++ b/drivers/video/geode/video_gx.c
@@ -220,7 +220,13 @@
/* Set the dither control */
writel(0x70, par->vid_regs + GX_FP_DFC);
- /* Turn on the device */
+ /* Enable the FP data and power (in case the BIOS didn't) */
+
+ fp = readl(par->vid_regs + GX_DCFG);
+ fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN;
+ writel(fp, par->vid_regs + GX_DCFG);
+
+ /* Unblank the panel */
fp = readl(par->vid_regs + GX_FP_PM);
fp |= GX_FP_PM_P;
@@ -245,9 +251,12 @@
writel(misc, par->vid_regs + GX_MISC);
/* Write the display configuration */
-
dcfg = readl(par->vid_regs + GX_DCFG);
+ /* Disable hsync and vsync */
+ dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
+ writel(dcfg, par->vid_regs + GX_DCFG);
+
/* Clear bits from existing mode. */
dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
| GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL