rt2x00: Convert rt61pci to use tasklets
Fix interrupt processing on slow machines by using individual tasklets
for each different device interrupt. This ensures that while a RX or TX
status tasklet is scheduled only the according device interrupt is
masked and other interrupts such as TBTT can still be processed.
Also, this allows us to use tasklet_hi_schedule for TBTT processing
which is required to not send out beacons with a wrong DTIM count (due
to delayed periodic beacon updates). Furthermore, this improves the
latency between the TBTT and sending out buffered multi- and broadcast
traffic.
As a nice bonus, the interrupt handling overhead should be much lower.
Compile-tested only.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index f14cc45..351055d 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1142,6 +1142,11 @@
rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
break;
case QID_BEACON:
+ /*
+ * Allow the tbtt tasklet to be scheduled.
+ */
+ tasklet_enable(&rt2x00dev->tbtt_tasklet);
+
rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®);
rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1);
rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1);
@@ -1221,6 +1226,11 @@
rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0);
rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0);
rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
+
+ /*
+ * Wait for possibly running tbtt tasklets.
+ */
+ tasklet_disable(&rt2x00dev->tbtt_tasklet);
break;
default:
break;
@@ -1710,6 +1720,7 @@
int mask = (state == STATE_RADIO_IRQ_OFF) ||
(state == STATE_RADIO_IRQ_OFF_ISR);
u32 reg;
+ unsigned long flags;
/*
* When interrupts are being enabled, the interrupt registers
@@ -1721,12 +1732,21 @@
rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, ®);
rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg);
+
+ /*
+ * Enable tasklets.
+ */
+ tasklet_enable(&rt2x00dev->txstatus_tasklet);
+ tasklet_enable(&rt2x00dev->rxdone_tasklet);
+ tasklet_enable(&rt2x00dev->autowake_tasklet);
}
/*
* Only toggle the interrupts bits we are going to use.
* Non-checked interrupt bits are disabled by default.
*/
+ spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags);
+
rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, ®);
rt2x00_set_field32(®, INT_MASK_CSR_TXDONE, mask);
rt2x00_set_field32(®, INT_MASK_CSR_RXDONE, mask);
@@ -1746,6 +1766,17 @@
rt2x00_set_field32(®, MCU_INT_MASK_CSR_7, mask);
rt2x00_set_field32(®, MCU_INT_MASK_CSR_TWAKEUP, mask);
rt2x00pci_register_write(rt2x00dev, MCU_INT_MASK_CSR, reg);
+
+ spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags);
+
+ if (state == STATE_RADIO_IRQ_OFF) {
+ /*
+ * Ensure that all tasklets are finished.
+ */
+ tasklet_disable(&rt2x00dev->txstatus_tasklet);
+ tasklet_disable(&rt2x00dev->rxdone_tasklet);
+ tasklet_disable(&rt2x00dev->autowake_tasklet);
+ }
}
static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev)
@@ -2223,61 +2254,80 @@
rt61pci_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS);
}
-static irqreturn_t rt61pci_interrupt_thread(int irq, void *dev_instance)
+static void rt61pci_enable_interrupt(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00_field32 irq_field)
{
- struct rt2x00_dev *rt2x00dev = dev_instance;
- u32 reg = rt2x00dev->irqvalue[0];
- u32 reg_mcu = rt2x00dev->irqvalue[1];
+ unsigned long flags;
+ u32 reg;
/*
- * Handle interrupts, walk through all bits
- * and run the tasks, the bits are checked in order of
- * priority.
+ * Enable a single interrupt. The interrupt mask register
+ * access needs locking.
*/
+ spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags);
- /*
- * 1 - Rx ring done interrupt.
- */
- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RXDONE))
- rt2x00pci_rxdone(rt2x00dev);
+ rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, ®);
+ rt2x00_set_field32(®, irq_field, 0);
+ rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg);
- /*
- * 2 - Tx ring done interrupt.
- */
- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TXDONE))
- rt61pci_txdone(rt2x00dev);
-
- /*
- * 3 - Handle MCU command done.
- */
- if (reg_mcu)
- rt2x00pci_register_write(rt2x00dev,
- M2H_CMD_DONE_CSR, 0xffffffff);
-
- /*
- * 4 - MCU Autowakeup interrupt.
- */
- if (rt2x00_get_field32(reg_mcu, MCU_INT_SOURCE_CSR_TWAKEUP))
- rt61pci_wakeup(rt2x00dev);
-
- /*
- * 5 - Beacon done interrupt.
- */
- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_BEACON_DONE))
- rt2x00lib_beacondone(rt2x00dev);
-
- /* Enable interrupts again. */
- rt2x00dev->ops->lib->set_device_state(rt2x00dev,
- STATE_RADIO_IRQ_ON_ISR);
- return IRQ_HANDLED;
+ spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags);
}
+static void rt61pci_enable_mcu_interrupt(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00_field32 irq_field)
+{
+ unsigned long flags;
+ u32 reg;
+
+ /*
+ * Enable a single MCU interrupt. The interrupt mask register
+ * access needs locking.
+ */
+ spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags);
+
+ rt2x00pci_register_read(rt2x00dev, MCU_INT_MASK_CSR, ®);
+ rt2x00_set_field32(®, irq_field, 0);
+ rt2x00pci_register_write(rt2x00dev, MCU_INT_MASK_CSR, reg);
+
+ spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags);
+}
+
+static void rt61pci_txstatus_tasklet(unsigned long data)
+{
+ struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+ rt61pci_txdone(rt2x00dev);
+ rt61pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_TXDONE);
+}
+
+static void rt61pci_tbtt_tasklet(unsigned long data)
+{
+ struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+ rt2x00lib_beacondone(rt2x00dev);
+ rt61pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_BEACON_DONE);
+}
+
+static void rt61pci_rxdone_tasklet(unsigned long data)
+{
+ struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+ rt2x00pci_rxdone(rt2x00dev);
+ rt61pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RXDONE);
+}
+
+static void rt61pci_autowake_tasklet(unsigned long data)
+{
+ struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+ rt61pci_wakeup(rt2x00dev);
+ rt2x00pci_register_write(rt2x00dev,
+ M2H_CMD_DONE_CSR, 0xffffffff);
+ rt61pci_enable_mcu_interrupt(rt2x00dev, MCU_INT_MASK_CSR_TWAKEUP);
+}
static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance)
{
struct rt2x00_dev *rt2x00dev = dev_instance;
- u32 reg_mcu;
- u32 reg;
+ u32 reg_mcu, mask_mcu;
+ u32 reg, mask;
+ unsigned long flags;
/*
* Get the interrupt sources & saved to local variable.
@@ -2295,14 +2345,46 @@
if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return IRQ_HANDLED;
- /* Store irqvalues for use in the interrupt thread. */
- rt2x00dev->irqvalue[0] = reg;
- rt2x00dev->irqvalue[1] = reg_mcu;
+ /*
+ * Schedule tasklets for interrupt handling.
+ */
+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RXDONE))
+ tasklet_schedule(&rt2x00dev->rxdone_tasklet);
- /* Disable interrupts, will be enabled again in the interrupt thread. */
- rt2x00dev->ops->lib->set_device_state(rt2x00dev,
- STATE_RADIO_IRQ_OFF_ISR);
- return IRQ_WAKE_THREAD;
+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TXDONE))
+ tasklet_schedule(&rt2x00dev->txstatus_tasklet);
+
+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_BEACON_DONE))
+ tasklet_hi_schedule(&rt2x00dev->tbtt_tasklet);
+
+ if (rt2x00_get_field32(reg_mcu, MCU_INT_SOURCE_CSR_TWAKEUP))
+ tasklet_schedule(&rt2x00dev->autowake_tasklet);
+
+ /*
+ * Since INT_MASK_CSR and INT_SOURCE_CSR use the same bits
+ * for interrupts and interrupt masks we can just use the value of
+ * INT_SOURCE_CSR to create the interrupt mask.
+ */
+ mask = reg;
+ mask_mcu = reg_mcu;
+
+ /*
+ * Disable all interrupts for which a tasklet was scheduled right now,
+ * the tasklet will reenable the appropriate interrupts.
+ */
+ spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags);
+
+ rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, ®);
+ reg |= mask;
+ rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg);
+
+ rt2x00pci_register_read(rt2x00dev, MCU_INT_MASK_CSR, ®);
+ reg |= mask_mcu;
+ rt2x00pci_register_write(rt2x00dev, MCU_INT_MASK_CSR, reg);
+
+ spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags);
+
+ return IRQ_HANDLED;
}
/*
@@ -2896,7 +2978,10 @@
static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
.irq_handler = rt61pci_interrupt,
- .irq_handler_thread = rt61pci_interrupt_thread,
+ .txstatus_tasklet = rt61pci_txstatus_tasklet,
+ .tbtt_tasklet = rt61pci_tbtt_tasklet,
+ .rxdone_tasklet = rt61pci_rxdone_tasklet,
+ .autowake_tasklet = rt61pci_autowake_tasklet,
.probe_hw = rt61pci_probe_hw,
.get_firmware_name = rt61pci_get_firmware_name,
.check_firmware = rt61pci_check_firmware,