Merge branch 'clksrc' into devel
Conflicts:
arch/arm/mach-vexpress/v2m.c
arch/arm/plat-omap/counter_32k.c
arch/arm/plat-versatile/Makefile
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9d26083..2e86b8f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -14,6 +14,7 @@
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
+ select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
select HAVE_GENERIC_DMA_COHERENT
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZO
@@ -38,6 +39,9 @@
config SYS_SUPPORTS_APM_EMULATION
bool
+config HAVE_SCHED_CLOCK
+ bool
+
config GENERIC_GPIO
bool
@@ -233,6 +237,7 @@
bool "ARM Ltd. RealView family"
select ARM_AMBA
select COMMON_CLKDEV
+ select HAVE_SCHED_CLOCK
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -247,6 +252,7 @@
select ARM_AMBA
select ARM_VIC
select COMMON_CLKDEV
+ select HAVE_SCHED_CLOCK
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -263,6 +269,7 @@
select COMMON_CLKDEV
select GENERIC_CLOCKEVENTS
select HAVE_CLK
+ select HAVE_SCHED_CLOCK
select ICST
select PLAT_VERSATILE
help
@@ -434,6 +441,7 @@
select CPU_XSCALE
select GENERIC_GPIO
select GENERIC_CLOCKEVENTS
+ select HAVE_SCHED_CLOCK
select DMABOUNCE if PCI
help
Support for Intel's IXP4XX (XScale) family of processors.
@@ -509,6 +517,7 @@
select ARCH_REQUIRE_GPIOLIB
select COMMON_CLKDEV
select GENERIC_CLOCKEVENTS
+ select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select PLAT_PXA
select SPARSE_IRQ
@@ -565,6 +574,7 @@
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select HAVE_CLK
+ select HAVE_SCHED_CLOCK
select COMMON_CLKDEV
select ARCH_HAS_BARRIERS if CACHE_L2X0
select ARCH_HAS_CPUFREQ
@@ -588,6 +598,7 @@
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
+ select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select PLAT_PXA
select SPARSE_IRQ
@@ -636,6 +647,7 @@
select CPU_FREQ
select GENERIC_CLOCKEVENTS
select HAVE_CLK
+ select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select ARCH_REQUIRE_GPIOLIB
help
@@ -782,6 +794,7 @@
bool "ST-Ericsson U300 Series"
depends on MMU
select CPU_ARM926T
+ select HAVE_SCHED_CLOCK
select HAVE_TCM
select ARM_AMBA
select ARM_VIC
@@ -830,6 +843,7 @@
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_CPUFREQ
select GENERIC_CLOCKEVENTS
+ select HAVE_SCHED_CLOCK
select ARCH_HAS_HOLES_MEMORYMODEL
help
Support for TI's OMAP platform (OMAP1/2/3/4).
@@ -983,9 +997,11 @@
config PLAT_IOP
bool
select GENERIC_CLOCKEVENTS
+ select HAVE_SCHED_CLOCK
config PLAT_ORION
bool
+ select HAVE_SCHED_CLOCK
config PLAT_PXA
bool
@@ -1212,10 +1228,11 @@
depends on EXPERIMENTAL
depends on GENERIC_CLOCKEVENTS
depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
- MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
- ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
+ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
+ ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
+ ARCH_MSM_SCORPIONMP
select USE_GENERIC_SMP_HELPERS
- select HAVE_ARM_SCU
+ select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
@@ -1290,6 +1307,7 @@
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
depends on SMP && HOTPLUG && EXPERIMENTAL
+ depends on !ARCH_MSM
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
@@ -1298,7 +1316,7 @@
bool "Use local timer interrupts"
depends on SMP
default y
- select HAVE_ARM_TWD
+ select HAVE_ARM_TWD if !ARCH_MSM_SCORPIONMP
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 2fd0b99..eac6208 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -23,7 +23,7 @@
config FRAME_POINTER
bool
depends on !THUMB2_KERNEL
- default y if !ARM_UNWIND
+ default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
help
If you say N here, the resulting kernel will be slightly smaller and
faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index 4740313..6ef3342 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -44,7 +44,6 @@
.rating = 200,
.read = sp804_read,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -61,8 +60,7 @@
writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
clksrc_base + TIMER_CTRL);
- cs->mult = clocksource_khz2mult(TIMER_FREQ_KHZ, cs->shift);
- clocksource_register(cs);
+ clocksource_register_khz(cs, TIMER_FREQ_KHZ);
}
diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h
new file mode 100644
index 0000000..a84628b
--- /dev/null
+++ b/arch/arm/include/asm/sched_clock.h
@@ -0,0 +1,118 @@
+/*
+ * sched_clock.h: support for extending counters to full 64-bit ns counter
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASM_SCHED_CLOCK
+#define ASM_SCHED_CLOCK
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct clock_data {
+ u64 epoch_ns;
+ u32 epoch_cyc;
+ u32 epoch_cyc_copy;
+ u32 mult;
+ u32 shift;
+};
+
+#define DEFINE_CLOCK_DATA(name) struct clock_data name
+
+static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
+{
+ return (cyc * mult) >> shift;
+}
+
+/*
+ * Atomically update the sched_clock epoch. Your update callback will
+ * be called from a timer before the counter wraps - read the current
+ * counter value, and call this function to safely move the epochs
+ * forward. Only use this from the update callback.
+ */
+static inline void update_sched_clock(struct clock_data *cd, u32 cyc, u32 mask)
+{
+ unsigned long flags;
+ u64 ns = cd->epoch_ns +
+ cyc_to_ns((cyc - cd->epoch_cyc) & mask, cd->mult, cd->shift);
+
+ /*
+ * Write epoch_cyc and epoch_ns in a way that the update is
+ * detectable in cyc_to_fixed_sched_clock().
+ */
+ raw_local_irq_save(flags);
+ cd->epoch_cyc = cyc;
+ smp_wmb();
+ cd->epoch_ns = ns;
+ smp_wmb();
+ cd->epoch_cyc_copy = cyc;
+ raw_local_irq_restore(flags);
+}
+
+/*
+ * If your clock rate is known at compile time, using this will allow
+ * you to optimize the mult/shift loads away. This is paired with
+ * init_fixed_sched_clock() to ensure that your mult/shift are correct.
+ */
+static inline unsigned long long cyc_to_fixed_sched_clock(struct clock_data *cd,
+ u32 cyc, u32 mask, u32 mult, u32 shift)
+{
+ u64 epoch_ns;
+ u32 epoch_cyc;
+
+ /*
+ * Load the epoch_cyc and epoch_ns atomically. We do this by
+ * ensuring that we always write epoch_cyc, epoch_ns and
+ * epoch_cyc_copy in strict order, and read them in strict order.
+ * If epoch_cyc and epoch_cyc_copy are not equal, then we're in
+ * the middle of an update, and we should repeat the load.
+ */
+ do {
+ epoch_cyc = cd->epoch_cyc;
+ smp_rmb();
+ epoch_ns = cd->epoch_ns;
+ smp_rmb();
+ } while (epoch_cyc != cd->epoch_cyc_copy);
+
+ return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, mult, shift);
+}
+
+/*
+ * Otherwise, you need to use this, which will obtain the mult/shift
+ * from the clock_data structure. Use init_sched_clock() with this.
+ */
+static inline unsigned long long cyc_to_sched_clock(struct clock_data *cd,
+ u32 cyc, u32 mask)
+{
+ return cyc_to_fixed_sched_clock(cd, cyc, mask, cd->mult, cd->shift);
+}
+
+/*
+ * Initialize the clock data - calculate the appropriate multiplier
+ * and shift. Also setup a timer to ensure that the epoch is refreshed
+ * at the appropriate time interval, which will call your update
+ * handler.
+ */
+void init_sched_clock(struct clock_data *, void (*)(void),
+ unsigned int, unsigned long);
+
+/*
+ * Use this initialization function rather than init_sched_clock() if
+ * you're using cyc_to_fixed_sched_clock, which will warn if your
+ * constants are incorrect.
+ */
+static inline void init_fixed_sched_clock(struct clock_data *cd,
+ void (*update)(void), unsigned int bits, unsigned long rate,
+ u32 mult, u32 shift)
+{
+ init_sched_clock(cd, update, bits, rate);
+ if (cd->mult != mult || cd->shift != shift) {
+ pr_crit("sched_clock: wrong multiply/shift: %u>>%u vs calculated %u>>%u\n"
+ "sched_clock: fix multiply/shift to avoid scheduler hiccups\n",
+ mult, shift, cd->mult, cd->shift);
+ }
+}
+
+#endif
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 8002594..3222ab8 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -63,6 +63,11 @@
#include <asm/outercache.h>
#define __exception __attribute__((section(".exception.text")))
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#define __exception_irq_entry __irq_entry
+#else
+#define __exception_irq_entry __exception
+#endif
struct thread_info;
struct task_struct;
diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h
index 491960b..124475a 100644
--- a/arch/arm/include/asm/traps.h
+++ b/arch/arm/include/asm/traps.h
@@ -15,13 +15,32 @@
void register_undef_hook(struct undef_hook *hook);
void unregister_undef_hook(struct undef_hook *hook);
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+static inline int __in_irqentry_text(unsigned long ptr)
+{
+ extern char __irqentry_text_start[];
+ extern char __irqentry_text_end[];
+
+ return ptr >= (unsigned long)&__irqentry_text_start &&
+ ptr < (unsigned long)&__irqentry_text_end;
+}
+#else
+static inline int __in_irqentry_text(unsigned long ptr)
+{
+ return 0;
+}
+#endif
+
static inline int in_exception_text(unsigned long ptr)
{
extern char __exception_text_start[];
extern char __exception_text_end[];
+ int in;
- return ptr >= (unsigned long)&__exception_text_start &&
- ptr < (unsigned long)&__exception_text_end;
+ in = ptr >= (unsigned long)&__exception_text_start &&
+ ptr < (unsigned long)&__exception_text_end;
+
+ return in ? : __in_irqentry_text(ptr);
}
extern void __init early_trap_init(void);
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 5b9b268..fd3ec49 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -5,7 +5,7 @@
CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET)
AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
-ifdef CONFIG_DYNAMIC_FTRACE
+ifdef CONFIG_FUNCTION_TRACER
CFLAGS_REMOVE_ftrace.o = -pg
endif
@@ -29,10 +29,12 @@
obj-$(CONFIG_ARTHUR) += arthur.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
+obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o
obj-$(CONFIG_HAVE_ARM_TWD) += smp_twd.o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o
obj-$(CONFIG_ATAGS_PROC) += atags.o
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 80bf8cd..1e7b04a 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -147,98 +147,170 @@
#endif
#endif
-#ifdef CONFIG_DYNAMIC_FTRACE
-ENTRY(__gnu_mcount_nc)
- mov ip, lr
- ldmia sp!, {lr}
- mov pc, ip
-ENDPROC(__gnu_mcount_nc)
-
-ENTRY(ftrace_caller)
- stmdb sp!, {r0-r3, lr}
- mov r0, lr
- sub r0, r0, #MCOUNT_INSN_SIZE
- ldr r1, [sp, #20]
-
- .global ftrace_call
-ftrace_call:
- bl ftrace_stub
- ldmia sp!, {r0-r3, ip, lr}
- mov pc, ip
-ENDPROC(ftrace_caller)
-
-#ifdef CONFIG_OLD_MCOUNT
-ENTRY(mcount)
- stmdb sp!, {lr}
- ldr lr, [fp, #-4]
- ldmia sp!, {pc}
-ENDPROC(mcount)
-
-ENTRY(ftrace_caller_old)
- stmdb sp!, {r0-r3, lr}
- ldr r1, [fp, #-4]
- mov r0, lr
- sub r0, r0, #MCOUNT_INSN_SIZE
-
- .globl ftrace_call_old
-ftrace_call_old:
- bl ftrace_stub
- ldr lr, [fp, #-4] @ restore lr
- ldmia sp!, {r0-r3, pc}
-ENDPROC(ftrace_caller_old)
-#endif
-
-#else
-
-ENTRY(__gnu_mcount_nc)
- stmdb sp!, {r0-r3, lr}
+.macro __mcount suffix
+ mcount_enter
ldr r0, =ftrace_trace_function
ldr r2, [r0]
adr r0, .Lftrace_stub
cmp r0, r2
- bne gnu_trace
- ldmia sp!, {r0-r3, ip, lr}
- mov pc, ip
+ bne 1f
-gnu_trace:
- ldr r1, [sp, #20] @ lr of instrumented routine
- mov r0, lr
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ ldr r1, =ftrace_graph_return
+ ldr r2, [r1]
+ cmp r0, r2
+ bne ftrace_graph_caller\suffix
+
+ ldr r1, =ftrace_graph_entry
+ ldr r2, [r1]
+ ldr r0, =ftrace_graph_entry_stub
+ cmp r0, r2
+ bne ftrace_graph_caller\suffix
+#endif
+
+ mcount_exit
+
+1: mcount_get_lr r1 @ lr of instrumented func
+ mov r0, lr @ instrumented function
sub r0, r0, #MCOUNT_INSN_SIZE
- adr lr, BSYM(1f)
+ adr lr, BSYM(2f)
mov pc, r2
-1:
- ldmia sp!, {r0-r3, ip, lr}
- mov pc, ip
-ENDPROC(__gnu_mcount_nc)
+2: mcount_exit
+.endm
+
+.macro __ftrace_caller suffix
+ mcount_enter
+
+ mcount_get_lr r1 @ lr of instrumented func
+ mov r0, lr @ instrumented function
+ sub r0, r0, #MCOUNT_INSN_SIZE
+
+ .globl ftrace_call\suffix
+ftrace_call\suffix:
+ bl ftrace_stub
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ .globl ftrace_graph_call\suffix
+ftrace_graph_call\suffix:
+ mov r0, r0
+#endif
+
+ mcount_exit
+.endm
+
+.macro __ftrace_graph_caller
+ sub r0, fp, #4 @ &lr of instrumented routine (&parent)
+#ifdef CONFIG_DYNAMIC_FTRACE
+ @ called from __ftrace_caller, saved in mcount_enter
+ ldr r1, [sp, #16] @ instrumented routine (func)
+#else
+ @ called from __mcount, untouched in lr
+ mov r1, lr @ instrumented routine (func)
+#endif
+ sub r1, r1, #MCOUNT_INSN_SIZE
+ mov r2, fp @ frame pointer
+ bl prepare_ftrace_return
+ mcount_exit
+.endm
#ifdef CONFIG_OLD_MCOUNT
/*
- * This is under an ifdef in order to force link-time errors for people trying
- * to build with !FRAME_POINTER with a GCC which doesn't use the new-style
- * mcount.
+ * mcount
*/
-ENTRY(mcount)
- stmdb sp!, {r0-r3, lr}
- ldr r0, =ftrace_trace_function
- ldr r2, [r0]
- adr r0, ftrace_stub
- cmp r0, r2
- bne trace
- ldr lr, [fp, #-4] @ restore lr
- ldmia sp!, {r0-r3, pc}
-trace:
- ldr r1, [fp, #-4] @ lr of instrumented routine
- mov r0, lr
- sub r0, r0, #MCOUNT_INSN_SIZE
- mov lr, pc
- mov pc, r2
- ldr lr, [fp, #-4] @ restore lr
+.macro mcount_enter
+ stmdb sp!, {r0-r3, lr}
+.endm
+
+.macro mcount_get_lr reg
+ ldr \reg, [fp, #-4]
+.endm
+
+.macro mcount_exit
+ ldr lr, [fp, #-4]
ldmia sp!, {r0-r3, pc}
+.endm
+
+ENTRY(mcount)
+#ifdef CONFIG_DYNAMIC_FTRACE
+ stmdb sp!, {lr}
+ ldr lr, [fp, #-4]
+ ldmia sp!, {pc}
+#else
+ __mcount _old
+#endif
ENDPROC(mcount)
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+ENTRY(ftrace_caller_old)
+ __ftrace_caller _old
+ENDPROC(ftrace_caller_old)
#endif
-#endif /* CONFIG_DYNAMIC_FTRACE */
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ENTRY(ftrace_graph_caller_old)
+ __ftrace_graph_caller
+ENDPROC(ftrace_graph_caller_old)
+#endif
+
+.purgem mcount_enter
+.purgem mcount_get_lr
+.purgem mcount_exit
+#endif
+
+/*
+ * __gnu_mcount_nc
+ */
+
+.macro mcount_enter
+ stmdb sp!, {r0-r3, lr}
+.endm
+
+.macro mcount_get_lr reg
+ ldr \reg, [sp, #20]
+.endm
+
+.macro mcount_exit
+ ldmia sp!, {r0-r3, ip, lr}
+ mov pc, ip
+.endm
+
+ENTRY(__gnu_mcount_nc)
+#ifdef CONFIG_DYNAMIC_FTRACE
+ mov ip, lr
+ ldmia sp!, {lr}
+ mov pc, ip
+#else
+ __mcount
+#endif
+ENDPROC(__gnu_mcount_nc)
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+ENTRY(ftrace_caller)
+ __ftrace_caller
+ENDPROC(ftrace_caller)
+#endif
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ENTRY(ftrace_graph_caller)
+ __ftrace_graph_caller
+ENDPROC(ftrace_graph_caller)
+#endif
+
+.purgem mcount_enter
+.purgem mcount_get_lr
+.purgem mcount_exit
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ .globl return_to_handler
+return_to_handler:
+ stmdb sp!, {r0-r3}
+ mov r0, fp @ frame pointer
+ bl ftrace_return_to_handler
+ mov lr, r0 @ r0 has real ret addr
+ ldmia sp!, {r0-r3}
+ mov pc, lr
+#endif
ENTRY(ftrace_stub)
.Lftrace_stub:
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index 971ac8c..c0062ad 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -24,6 +24,7 @@
#define NOP 0xe8bd4000 /* pop {lr} */
#endif
+#ifdef CONFIG_DYNAMIC_FTRACE
#ifdef CONFIG_OLD_MCOUNT
#define OLD_MCOUNT_ADDR ((unsigned long) mcount)
#define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old)
@@ -59,9 +60,9 @@
}
#endif
-/* construct a branch (BL) instruction to addr */
#ifdef CONFIG_THUMB2_KERNEL
-static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
+static unsigned long ftrace_gen_branch(unsigned long pc, unsigned long addr,
+ bool link)
{
unsigned long s, j1, j2, i1, i2, imm10, imm11;
unsigned long first, second;
@@ -83,15 +84,22 @@
j2 = (!i2) ^ s;
first = 0xf000 | (s << 10) | imm10;
- second = 0xd000 | (j1 << 13) | (j2 << 11) | imm11;
+ second = 0x9000 | (j1 << 13) | (j2 << 11) | imm11;
+ if (link)
+ second |= 1 << 14;
return (second << 16) | first;
}
#else
-static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
+static unsigned long ftrace_gen_branch(unsigned long pc, unsigned long addr,
+ bool link)
{
+ unsigned long opcode = 0xea000000;
long offset;
+ if (link)
+ opcode |= 1 << 24;
+
offset = (long)addr - (long)(pc + 8);
if (unlikely(offset < -33554432 || offset > 33554428)) {
/* Can't generate branches that far (from ARM ARM). Ftrace
@@ -103,10 +111,15 @@
offset = (offset >> 2) & 0x00ffffff;
- return 0xeb000000 | offset;
+ return opcode | offset;
}
#endif
+static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
+{
+ return ftrace_gen_branch(pc, addr, true);
+}
+
static int ftrace_modify_code(unsigned long pc, unsigned long old,
unsigned long new)
{
@@ -193,3 +206,83 @@
return 0;
}
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
+ unsigned long frame_pointer)
+{
+ unsigned long return_hooker = (unsigned long) &return_to_handler;
+ struct ftrace_graph_ent trace;
+ unsigned long old;
+ int err;
+
+ if (unlikely(atomic_read(¤t->tracing_graph_pause)))
+ return;
+
+ old = *parent;
+ *parent = return_hooker;
+
+ err = ftrace_push_return_trace(old, self_addr, &trace.depth,
+ frame_pointer);
+ if (err == -EBUSY) {
+ *parent = old;
+ return;
+ }
+
+ trace.func = self_addr;
+
+ /* Only trace if the calling function expects to */
+ if (!ftrace_graph_entry(&trace)) {
+ current->curr_ret_stack--;
+ *parent = old;
+ }
+}
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+extern unsigned long ftrace_graph_call;
+extern unsigned long ftrace_graph_call_old;
+extern void ftrace_graph_caller_old(void);
+
+static int __ftrace_modify_caller(unsigned long *callsite,
+ void (*func) (void), bool enable)
+{
+ unsigned long caller_fn = (unsigned long) func;
+ unsigned long pc = (unsigned long) callsite;
+ unsigned long branch = ftrace_gen_branch(pc, caller_fn, false);
+ unsigned long nop = 0xe1a00000; /* mov r0, r0 */
+ unsigned long old = enable ? nop : branch;
+ unsigned long new = enable ? branch : nop;
+
+ return ftrace_modify_code(pc, old, new);
+}
+
+static int ftrace_modify_graph_caller(bool enable)
+{
+ int ret;
+
+ ret = __ftrace_modify_caller(&ftrace_graph_call,
+ ftrace_graph_caller,
+ enable);
+
+#ifdef CONFIG_OLD_MCOUNT
+ if (!ret)
+ ret = __ftrace_modify_caller(&ftrace_graph_call_old,
+ ftrace_graph_caller_old,
+ enable);
+#endif
+
+ return ret;
+}
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+ return ftrace_modify_graph_caller(true);
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+ return ftrace_modify_graph_caller(false);
+}
+#endif /* CONFIG_DYNAMIC_FTRACE */
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 36ad3be..6d61633 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -35,6 +35,7 @@
#include <linux/list.h>
#include <linux/kallsyms.h>
#include <linux/proc_fs.h>
+#include <linux/ftrace.h>
#include <asm/system.h>
#include <asm/mach/irq.h>
@@ -105,7 +106,8 @@
* come via this function. Instead, they should provide their
* own 'handler'
*/
-asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+asmlinkage void __exception_irq_entry
+asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 07a5035..421a4bb 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -4,9 +4,7 @@
* ARM performance counter support.
*
* Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
- *
- * ARMv7 support: Jean Pihet <jpihet@mvista.com>
- * 2010 (c) MontaVista Software, LLC.
+ * Copyright (C) 2010 ARM Ltd., Will Deacon <will.deacon@arm.com>
*
* This code is based on the sparc64 perf event code, which is in turn based
* on the x86 code. Callchain code is based on the ARM OProfile backtrace
@@ -69,29 +67,23 @@
};
DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
-/* PMU names. */
-static const char *arm_pmu_names[] = {
- [ARM_PERF_PMU_ID_XSCALE1] = "xscale1",
- [ARM_PERF_PMU_ID_XSCALE2] = "xscale2",
- [ARM_PERF_PMU_ID_V6] = "v6",
- [ARM_PERF_PMU_ID_V6MP] = "v6mpcore",
- [ARM_PERF_PMU_ID_CA8] = "ARMv7 Cortex-A8",
- [ARM_PERF_PMU_ID_CA9] = "ARMv7 Cortex-A9",
-};
-
struct arm_pmu {
enum arm_perf_pmu_ids id;
+ const char *name;
irqreturn_t (*handle_irq)(int irq_num, void *dev);
void (*enable)(struct hw_perf_event *evt, int idx);
void (*disable)(struct hw_perf_event *evt, int idx);
- int (*event_map)(int evt);
- u64 (*raw_event)(u64);
int (*get_event_idx)(struct cpu_hw_events *cpuc,
struct hw_perf_event *hwc);
u32 (*read_counter)(int idx);
void (*write_counter)(int idx, u32 val);
void (*start)(void);
void (*stop)(void);
+ const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX];
+ const unsigned (*event_map)[PERF_COUNT_HW_MAX];
+ u32 raw_event_mask;
int num_events;
u64 max_period;
};
@@ -136,10 +128,6 @@
#define CACHE_OP_UNSUPPORTED 0xFFFF
-static unsigned armpmu_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX];
-
static int
armpmu_map_cache_event(u64 config)
{
@@ -157,7 +145,7 @@
if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
return -EINVAL;
- ret = (int)armpmu_perf_cache_map[cache_type][cache_op][cache_result];
+ ret = (int)(*armpmu->cache_map)[cache_type][cache_op][cache_result];
if (ret == CACHE_OP_UNSUPPORTED)
return -ENOENT;
@@ -166,6 +154,19 @@
}
static int
+armpmu_map_event(u64 config)
+{
+ int mapping = (*armpmu->event_map)[config];
+ return mapping == HW_OP_UNSUPPORTED ? -EOPNOTSUPP : mapping;
+}
+
+static int
+armpmu_map_raw_event(u64 config)
+{
+ return (int)(config & armpmu->raw_event_mask);
+}
+
+static int
armpmu_event_set_period(struct perf_event *event,
struct hw_perf_event *hwc,
int idx)
@@ -458,11 +459,11 @@
/* Decode the generic type into an ARM event identifier. */
if (PERF_TYPE_HARDWARE == event->attr.type) {
- mapping = armpmu->event_map(event->attr.config);
+ mapping = armpmu_map_event(event->attr.config);
} else if (PERF_TYPE_HW_CACHE == event->attr.type) {
mapping = armpmu_map_cache_event(event->attr.config);
} else if (PERF_TYPE_RAW == event->attr.type) {
- mapping = armpmu->raw_event(event->attr.config);
+ mapping = armpmu_map_raw_event(event->attr.config);
} else {
pr_debug("event type %x not supported\n", event->attr.type);
return -EOPNOTSUPP;
@@ -603,2366 +604,10 @@
.read = armpmu_read,
};
-/*
- * ARMv6 Performance counter handling code.
- *
- * ARMv6 has 2 configurable performance counters and a single cycle counter.
- * They all share a single reset bit but can be written to zero so we can use
- * that for a reset.
- *
- * The counters can't be individually enabled or disabled so when we remove
- * one event and replace it with another we could get spurious counts from the
- * wrong event. However, we can take advantage of the fact that the
- * performance counters can export events to the event bus, and the event bus
- * itself can be monitored. This requires that we *don't* export the events to
- * the event bus. The procedure for disabling a configurable counter is:
- * - change the counter to count the ETMEXTOUT[0] signal (0x20). This
- * effectively stops the counter from counting.
- * - disable the counter's interrupt generation (each counter has it's
- * own interrupt enable bit).
- * Once stopped, the counter value can be written as 0 to reset.
- *
- * To enable a counter:
- * - enable the counter's interrupt generation.
- * - set the new event type.
- *
- * Note: the dedicated cycle counter only counts cycles and can't be
- * enabled/disabled independently of the others. When we want to disable the
- * cycle counter, we have to just disable the interrupt reporting and start
- * ignoring that counter. When re-enabling, we have to reset the value and
- * enable the interrupt.
- */
-
-enum armv6_perf_types {
- ARMV6_PERFCTR_ICACHE_MISS = 0x0,
- ARMV6_PERFCTR_IBUF_STALL = 0x1,
- ARMV6_PERFCTR_DDEP_STALL = 0x2,
- ARMV6_PERFCTR_ITLB_MISS = 0x3,
- ARMV6_PERFCTR_DTLB_MISS = 0x4,
- ARMV6_PERFCTR_BR_EXEC = 0x5,
- ARMV6_PERFCTR_BR_MISPREDICT = 0x6,
- ARMV6_PERFCTR_INSTR_EXEC = 0x7,
- ARMV6_PERFCTR_DCACHE_HIT = 0x9,
- ARMV6_PERFCTR_DCACHE_ACCESS = 0xA,
- ARMV6_PERFCTR_DCACHE_MISS = 0xB,
- ARMV6_PERFCTR_DCACHE_WBACK = 0xC,
- ARMV6_PERFCTR_SW_PC_CHANGE = 0xD,
- ARMV6_PERFCTR_MAIN_TLB_MISS = 0xF,
- ARMV6_PERFCTR_EXPL_D_ACCESS = 0x10,
- ARMV6_PERFCTR_LSU_FULL_STALL = 0x11,
- ARMV6_PERFCTR_WBUF_DRAINED = 0x12,
- ARMV6_PERFCTR_CPU_CYCLES = 0xFF,
- ARMV6_PERFCTR_NOP = 0x20,
-};
-
-enum armv6_counters {
- ARMV6_CYCLE_COUNTER = 1,
- ARMV6_COUNTER0,
- ARMV6_COUNTER1,
-};
-
-/*
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT,
- [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
-};
-
-static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
- [C(L1D)] = {
- /*
- * The performance counters don't differentiate between read
- * and write accesses/misses so this isn't strictly correct,
- * but it's the best we can do. Writes and reads get
- * combined.
- */
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(L1I)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(LL)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(DTLB)] = {
- /*
- * The ARM performance counters can count micro DTLB misses,
- * micro ITLB misses and main TLB misses. There isn't an event
- * for TLB misses, so use the micro misses here and if users
- * want the main TLB misses they can use a raw counter.
- */
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(ITLB)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(BPU)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
-};
-
-enum armv6mpcore_perf_types {
- ARMV6MPCORE_PERFCTR_ICACHE_MISS = 0x0,
- ARMV6MPCORE_PERFCTR_IBUF_STALL = 0x1,
- ARMV6MPCORE_PERFCTR_DDEP_STALL = 0x2,
- ARMV6MPCORE_PERFCTR_ITLB_MISS = 0x3,
- ARMV6MPCORE_PERFCTR_DTLB_MISS = 0x4,
- ARMV6MPCORE_PERFCTR_BR_EXEC = 0x5,
- ARMV6MPCORE_PERFCTR_BR_NOTPREDICT = 0x6,
- ARMV6MPCORE_PERFCTR_BR_MISPREDICT = 0x7,
- ARMV6MPCORE_PERFCTR_INSTR_EXEC = 0x8,
- ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
- ARMV6MPCORE_PERFCTR_DCACHE_RDMISS = 0xB,
- ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
- ARMV6MPCORE_PERFCTR_DCACHE_WRMISS = 0xD,
- ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
- ARMV6MPCORE_PERFCTR_SW_PC_CHANGE = 0xF,
- ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS = 0x10,
- ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
- ARMV6MPCORE_PERFCTR_LSU_FULL_STALL = 0x12,
- ARMV6MPCORE_PERFCTR_WBUF_DRAINED = 0x13,
- ARMV6MPCORE_PERFCTR_CPU_CYCLES = 0xFF,
-};
-
-/*
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
- [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
-};
-
-static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
- [C(L1D)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] =
- ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
- [C(RESULT_MISS)] =
- ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] =
- ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
- [C(RESULT_MISS)] =
- ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(L1I)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(LL)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(DTLB)] = {
- /*
- * The ARM performance counters can count micro DTLB misses,
- * micro ITLB misses and main TLB misses. There isn't an event
- * for TLB misses, so use the micro misses here and if users
- * want the main TLB misses they can use a raw counter.
- */
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(ITLB)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(BPU)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
-};
-
-static inline unsigned long
-armv6_pmcr_read(void)
-{
- u32 val;
- asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r"(val));
- return val;
-}
-
-static inline void
-armv6_pmcr_write(unsigned long val)
-{
- asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r"(val));
-}
-
-#define ARMV6_PMCR_ENABLE (1 << 0)
-#define ARMV6_PMCR_CTR01_RESET (1 << 1)
-#define ARMV6_PMCR_CCOUNT_RESET (1 << 2)
-#define ARMV6_PMCR_CCOUNT_DIV (1 << 3)
-#define ARMV6_PMCR_COUNT0_IEN (1 << 4)
-#define ARMV6_PMCR_COUNT1_IEN (1 << 5)
-#define ARMV6_PMCR_CCOUNT_IEN (1 << 6)
-#define ARMV6_PMCR_COUNT0_OVERFLOW (1 << 8)
-#define ARMV6_PMCR_COUNT1_OVERFLOW (1 << 9)
-#define ARMV6_PMCR_CCOUNT_OVERFLOW (1 << 10)
-#define ARMV6_PMCR_EVT_COUNT0_SHIFT 20
-#define ARMV6_PMCR_EVT_COUNT0_MASK (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
-#define ARMV6_PMCR_EVT_COUNT1_SHIFT 12
-#define ARMV6_PMCR_EVT_COUNT1_MASK (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
-
-#define ARMV6_PMCR_OVERFLOWED_MASK \
- (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
- ARMV6_PMCR_CCOUNT_OVERFLOW)
-
-static inline int
-armv6_pmcr_has_overflowed(unsigned long pmcr)
-{
- return (pmcr & ARMV6_PMCR_OVERFLOWED_MASK);
-}
-
-static inline int
-armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
- enum armv6_counters counter)
-{
- int ret = 0;
-
- if (ARMV6_CYCLE_COUNTER == counter)
- ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
- else if (ARMV6_COUNTER0 == counter)
- ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
- else if (ARMV6_COUNTER1 == counter)
- ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
- else
- WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-
- return ret;
-}
-
-static inline u32
-armv6pmu_read_counter(int counter)
-{
- unsigned long value = 0;
-
- if (ARMV6_CYCLE_COUNTER == counter)
- asm volatile("mrc p15, 0, %0, c15, c12, 1" : "=r"(value));
- else if (ARMV6_COUNTER0 == counter)
- asm volatile("mrc p15, 0, %0, c15, c12, 2" : "=r"(value));
- else if (ARMV6_COUNTER1 == counter)
- asm volatile("mrc p15, 0, %0, c15, c12, 3" : "=r"(value));
- else
- WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-
- return value;
-}
-
-static inline void
-armv6pmu_write_counter(int counter,
- u32 value)
-{
- if (ARMV6_CYCLE_COUNTER == counter)
- asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value));
- else if (ARMV6_COUNTER0 == counter)
- asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r"(value));
- else if (ARMV6_COUNTER1 == counter)
- asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r"(value));
- else
- WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-}
-
-void
-armv6pmu_enable_event(struct hw_perf_event *hwc,
- int idx)
-{
- unsigned long val, mask, evt, flags;
-
- if (ARMV6_CYCLE_COUNTER == idx) {
- mask = 0;
- evt = ARMV6_PMCR_CCOUNT_IEN;
- } else if (ARMV6_COUNTER0 == idx) {
- mask = ARMV6_PMCR_EVT_COUNT0_MASK;
- evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
- ARMV6_PMCR_COUNT0_IEN;
- } else if (ARMV6_COUNTER1 == idx) {
- mask = ARMV6_PMCR_EVT_COUNT1_MASK;
- evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
- ARMV6_PMCR_COUNT1_IEN;
- } else {
- WARN_ONCE(1, "invalid counter number (%d)\n", idx);
- return;
- }
-
- /*
- * Mask out the current event and set the counter to count the event
- * that we're interested in.
- */
- spin_lock_irqsave(&pmu_lock, flags);
- val = armv6_pmcr_read();
- val &= ~mask;
- val |= evt;
- armv6_pmcr_write(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static irqreturn_t
-armv6pmu_handle_irq(int irq_num,
- void *dev)
-{
- unsigned long pmcr = armv6_pmcr_read();
- struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
- struct pt_regs *regs;
- int idx;
-
- if (!armv6_pmcr_has_overflowed(pmcr))
- return IRQ_NONE;
-
- regs = get_irq_regs();
-
- /*
- * The interrupts are cleared by writing the overflow flags back to
- * the control register. All of the other bits don't have any effect
- * if they are rewritten, so write the whole value back.
- */
- armv6_pmcr_write(pmcr);
-
- perf_sample_data_init(&data, 0);
-
- cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
- struct perf_event *event = cpuc->events[idx];
- struct hw_perf_event *hwc;
-
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
- /*
- * We have a single interrupt for all counters. Check that
- * each counter has overflowed before we process it.
- */
- if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
- continue;
-
- hwc = &event->hw;
- armpmu_event_update(event, hwc, idx);
- data.period = event->hw.last_period;
- if (!armpmu_event_set_period(event, hwc, idx))
- continue;
-
- if (perf_event_overflow(event, 0, &data, regs))
- armpmu->disable(hwc, idx);
- }
-
- /*
- * Handle the pending perf events.
- *
- * Note: this call *must* be run with interrupts disabled. For
- * platforms that can have the PMU interrupts raised as an NMI, this
- * will not work.
- */
- irq_work_run();
-
- return IRQ_HANDLED;
-}
-
-static void
-armv6pmu_start(void)
-{
- unsigned long flags, val;
-
- spin_lock_irqsave(&pmu_lock, flags);
- val = armv6_pmcr_read();
- val |= ARMV6_PMCR_ENABLE;
- armv6_pmcr_write(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-void
-armv6pmu_stop(void)
-{
- unsigned long flags, val;
-
- spin_lock_irqsave(&pmu_lock, flags);
- val = armv6_pmcr_read();
- val &= ~ARMV6_PMCR_ENABLE;
- armv6_pmcr_write(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static inline int
-armv6pmu_event_map(int config)
-{
- int mapping = armv6_perf_map[config];
- if (HW_OP_UNSUPPORTED == mapping)
- mapping = -EOPNOTSUPP;
- return mapping;
-}
-
-static inline int
-armv6mpcore_pmu_event_map(int config)
-{
- int mapping = armv6mpcore_perf_map[config];
- if (HW_OP_UNSUPPORTED == mapping)
- mapping = -EOPNOTSUPP;
- return mapping;
-}
-
-static u64
-armv6pmu_raw_event(u64 config)
-{
- return config & 0xff;
-}
-
-static int
-armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
- struct hw_perf_event *event)
-{
- /* Always place a cycle counter into the cycle counter. */
- if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) {
- if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
- return -EAGAIN;
-
- return ARMV6_CYCLE_COUNTER;
- } else {
- /*
- * For anything other than a cycle counter, try and use
- * counter0 and counter1.
- */
- if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) {
- return ARMV6_COUNTER1;
- }
-
- if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) {
- return ARMV6_COUNTER0;
- }
-
- /* The counters are all in use. */
- return -EAGAIN;
- }
-}
-
-static void
-armv6pmu_disable_event(struct hw_perf_event *hwc,
- int idx)
-{
- unsigned long val, mask, evt, flags;
-
- if (ARMV6_CYCLE_COUNTER == idx) {
- mask = ARMV6_PMCR_CCOUNT_IEN;
- evt = 0;
- } else if (ARMV6_COUNTER0 == idx) {
- mask = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
- evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
- } else if (ARMV6_COUNTER1 == idx) {
- mask = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
- evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
- } else {
- WARN_ONCE(1, "invalid counter number (%d)\n", idx);
- return;
- }
-
- /*
- * Mask out the current event and set the counter to count the number
- * of ETM bus signal assertion cycles. The external reporting should
- * be disabled and so this should never increment.
- */
- spin_lock_irqsave(&pmu_lock, flags);
- val = armv6_pmcr_read();
- val &= ~mask;
- val |= evt;
- armv6_pmcr_write(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
- int idx)
-{
- unsigned long val, mask, flags, evt = 0;
-
- if (ARMV6_CYCLE_COUNTER == idx) {
- mask = ARMV6_PMCR_CCOUNT_IEN;
- } else if (ARMV6_COUNTER0 == idx) {
- mask = ARMV6_PMCR_COUNT0_IEN;
- } else if (ARMV6_COUNTER1 == idx) {
- mask = ARMV6_PMCR_COUNT1_IEN;
- } else {
- WARN_ONCE(1, "invalid counter number (%d)\n", idx);
- return;
- }
-
- /*
- * Unlike UP ARMv6, we don't have a way of stopping the counters. We
- * simply disable the interrupt reporting.
- */
- spin_lock_irqsave(&pmu_lock, flags);
- val = armv6_pmcr_read();
- val &= ~mask;
- val |= evt;
- armv6_pmcr_write(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static const struct arm_pmu armv6pmu = {
- .id = ARM_PERF_PMU_ID_V6,
- .handle_irq = armv6pmu_handle_irq,
- .enable = armv6pmu_enable_event,
- .disable = armv6pmu_disable_event,
- .event_map = armv6pmu_event_map,
- .raw_event = armv6pmu_raw_event,
- .read_counter = armv6pmu_read_counter,
- .write_counter = armv6pmu_write_counter,
- .get_event_idx = armv6pmu_get_event_idx,
- .start = armv6pmu_start,
- .stop = armv6pmu_stop,
- .num_events = 3,
- .max_period = (1LLU << 32) - 1,
-};
-
-/*
- * ARMv6mpcore is almost identical to single core ARMv6 with the exception
- * that some of the events have different enumerations and that there is no
- * *hack* to stop the programmable counters. To stop the counters we simply
- * disable the interrupt reporting and update the event. When unthrottling we
- * reset the period and enable the interrupt reporting.
- */
-static const struct arm_pmu armv6mpcore_pmu = {
- .id = ARM_PERF_PMU_ID_V6MP,
- .handle_irq = armv6pmu_handle_irq,
- .enable = armv6pmu_enable_event,
- .disable = armv6mpcore_pmu_disable_event,
- .event_map = armv6mpcore_pmu_event_map,
- .raw_event = armv6pmu_raw_event,
- .read_counter = armv6pmu_read_counter,
- .write_counter = armv6pmu_write_counter,
- .get_event_idx = armv6pmu_get_event_idx,
- .start = armv6pmu_start,
- .stop = armv6pmu_stop,
- .num_events = 3,
- .max_period = (1LLU << 32) - 1,
-};
-
-/*
- * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code.
- *
- * Copied from ARMv6 code, with the low level code inspired
- * by the ARMv7 Oprofile code.
- *
- * Cortex-A8 has up to 4 configurable performance counters and
- * a single cycle counter.
- * Cortex-A9 has up to 31 configurable performance counters and
- * a single cycle counter.
- *
- * All counters can be enabled/disabled and IRQ masked separately. The cycle
- * counter and all 4 performance counters together can be reset separately.
- */
-
-/* Common ARMv7 event types */
-enum armv7_perf_types {
- ARMV7_PERFCTR_PMNC_SW_INCR = 0x00,
- ARMV7_PERFCTR_IFETCH_MISS = 0x01,
- ARMV7_PERFCTR_ITLB_MISS = 0x02,
- ARMV7_PERFCTR_DCACHE_REFILL = 0x03,
- ARMV7_PERFCTR_DCACHE_ACCESS = 0x04,
- ARMV7_PERFCTR_DTLB_REFILL = 0x05,
- ARMV7_PERFCTR_DREAD = 0x06,
- ARMV7_PERFCTR_DWRITE = 0x07,
-
- ARMV7_PERFCTR_EXC_TAKEN = 0x09,
- ARMV7_PERFCTR_EXC_EXECUTED = 0x0A,
- ARMV7_PERFCTR_CID_WRITE = 0x0B,
- /* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
- * It counts:
- * - all branch instructions,
- * - instructions that explicitly write the PC,
- * - exception generating instructions.
- */
- ARMV7_PERFCTR_PC_WRITE = 0x0C,
- ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D,
- ARMV7_PERFCTR_UNALIGNED_ACCESS = 0x0F,
- ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10,
- ARMV7_PERFCTR_CLOCK_CYCLES = 0x11,
-
- ARMV7_PERFCTR_PC_BRANCH_MIS_USED = 0x12,
-
- ARMV7_PERFCTR_CPU_CYCLES = 0xFF
-};
-
-/* ARMv7 Cortex-A8 specific event types */
-enum armv7_a8_perf_types {
- ARMV7_PERFCTR_INSTR_EXECUTED = 0x08,
-
- ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E,
-
- ARMV7_PERFCTR_WRITE_BUFFER_FULL = 0x40,
- ARMV7_PERFCTR_L2_STORE_MERGED = 0x41,
- ARMV7_PERFCTR_L2_STORE_BUFF = 0x42,
- ARMV7_PERFCTR_L2_ACCESS = 0x43,
- ARMV7_PERFCTR_L2_CACH_MISS = 0x44,
- ARMV7_PERFCTR_AXI_READ_CYCLES = 0x45,
- ARMV7_PERFCTR_AXI_WRITE_CYCLES = 0x46,
- ARMV7_PERFCTR_MEMORY_REPLAY = 0x47,
- ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY = 0x48,
- ARMV7_PERFCTR_L1_DATA_MISS = 0x49,
- ARMV7_PERFCTR_L1_INST_MISS = 0x4A,
- ARMV7_PERFCTR_L1_DATA_COLORING = 0x4B,
- ARMV7_PERFCTR_L1_NEON_DATA = 0x4C,
- ARMV7_PERFCTR_L1_NEON_CACH_DATA = 0x4D,
- ARMV7_PERFCTR_L2_NEON = 0x4E,
- ARMV7_PERFCTR_L2_NEON_HIT = 0x4F,
- ARMV7_PERFCTR_L1_INST = 0x50,
- ARMV7_PERFCTR_PC_RETURN_MIS_PRED = 0x51,
- ARMV7_PERFCTR_PC_BRANCH_FAILED = 0x52,
- ARMV7_PERFCTR_PC_BRANCH_TAKEN = 0x53,
- ARMV7_PERFCTR_PC_BRANCH_EXECUTED = 0x54,
- ARMV7_PERFCTR_OP_EXECUTED = 0x55,
- ARMV7_PERFCTR_CYCLES_INST_STALL = 0x56,
- ARMV7_PERFCTR_CYCLES_INST = 0x57,
- ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL = 0x58,
- ARMV7_PERFCTR_CYCLES_NEON_INST_STALL = 0x59,
- ARMV7_PERFCTR_NEON_CYCLES = 0x5A,
-
- ARMV7_PERFCTR_PMU0_EVENTS = 0x70,
- ARMV7_PERFCTR_PMU1_EVENTS = 0x71,
- ARMV7_PERFCTR_PMU_EVENTS = 0x72,
-};
-
-/* ARMv7 Cortex-A9 specific event types */
-enum armv7_a9_perf_types {
- ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC = 0x40,
- ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC = 0x41,
- ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC = 0x42,
-
- ARMV7_PERFCTR_COHERENT_LINE_MISS = 0x50,
- ARMV7_PERFCTR_COHERENT_LINE_HIT = 0x51,
-
- ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES = 0x60,
- ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES = 0x61,
- ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES = 0x62,
- ARMV7_PERFCTR_STREX_EXECUTED_PASSED = 0x63,
- ARMV7_PERFCTR_STREX_EXECUTED_FAILED = 0x64,
- ARMV7_PERFCTR_DATA_EVICTION = 0x65,
- ARMV7_PERFCTR_ISSUE_STAGE_NO_INST = 0x66,
- ARMV7_PERFCTR_ISSUE_STAGE_EMPTY = 0x67,
- ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE = 0x68,
-
- ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS = 0x6E,
-
- ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST = 0x70,
- ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST = 0x71,
- ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST = 0x72,
- ARMV7_PERFCTR_FP_EXECUTED_INST = 0x73,
- ARMV7_PERFCTR_NEON_EXECUTED_INST = 0x74,
-
- ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES = 0x80,
- ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES = 0x81,
- ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES = 0x82,
- ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES = 0x83,
- ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES = 0x84,
- ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES = 0x85,
- ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES = 0x86,
-
- ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES = 0x8A,
- ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES = 0x8B,
-
- ARMV7_PERFCTR_ISB_INST = 0x90,
- ARMV7_PERFCTR_DSB_INST = 0x91,
- ARMV7_PERFCTR_DMB_INST = 0x92,
- ARMV7_PERFCTR_EXT_INTERRUPTS = 0x93,
-
- ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED = 0xA0,
- ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED = 0xA1,
- ARMV7_PERFCTR_PLE_FIFO_FLUSH = 0xA2,
- ARMV7_PERFCTR_PLE_RQST_COMPLETED = 0xA3,
- ARMV7_PERFCTR_PLE_FIFO_OVERFLOW = 0xA4,
- ARMV7_PERFCTR_PLE_RQST_PROG = 0xA5
-};
-
-/*
- * Cortex-A8 HW events mapping
- *
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
-};
-
-static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
- [C(L1D)] = {
- /*
- * The performance counters don't differentiate between read
- * and write accesses/misses so this isn't strictly correct,
- * but it's the best we can do. Writes and reads get
- * combined.
- */
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(L1I)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(LL)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(DTLB)] = {
- /*
- * Only ITLB misses and DTLB refills are supported.
- * If users want the DTLB refills misses a raw counter
- * must be used.
- */
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(ITLB)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(BPU)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
-};
-
-/*
- * Cortex-A9 HW events mapping
- */
-static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] =
- ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
- [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_COHERENT_LINE_HIT,
- [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_COHERENT_LINE_MISS,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
-};
-
-static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
- [C(L1D)] = {
- /*
- * The performance counters don't differentiate between read
- * and write accesses/misses so this isn't strictly correct,
- * but it's the best we can do. Writes and reads get
- * combined.
- */
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(L1I)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(LL)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(DTLB)] = {
- /*
- * Only ITLB misses and DTLB refills are supported.
- * If users want the DTLB refills misses a raw counter
- * must be used.
- */
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(ITLB)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(BPU)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
-};
-
-/*
- * Perf Events counters
- */
-enum armv7_counters {
- ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */
- ARMV7_COUNTER0 = 2, /* First event counter */
-};
-
-/*
- * The cycle counter is ARMV7_CYCLE_COUNTER.
- * The first event counter is ARMV7_COUNTER0.
- * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1).
- */
-#define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1)
-
-/*
- * ARMv7 low level PMNC access
- */
-
-/*
- * Per-CPU PMNC: config reg
- */
-#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */
-#define ARMV7_PMNC_P (1 << 1) /* Reset all counters */
-#define ARMV7_PMNC_C (1 << 2) /* Cycle counter reset */
-#define ARMV7_PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */
-#define ARMV7_PMNC_X (1 << 4) /* Export to ETM */
-#define ARMV7_PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/
-#define ARMV7_PMNC_N_SHIFT 11 /* Number of counters supported */
-#define ARMV7_PMNC_N_MASK 0x1f
-#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */
-
-/*
- * Available counters
- */
-#define ARMV7_CNT0 0 /* First event counter */
-#define ARMV7_CCNT 31 /* Cycle counter */
-
-/* Perf Event to low level counters mapping */
-#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0)
-
-/*
- * CNTENS: counters enable reg
- */
-#define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENS_C (1 << ARMV7_CCNT)
-
-/*
- * CNTENC: counters disable reg
- */
-#define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENC_C (1 << ARMV7_CCNT)
-
-/*
- * INTENS: counters overflow interrupt enable reg
- */
-#define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENS_C (1 << ARMV7_CCNT)
-
-/*
- * INTENC: counters overflow interrupt disable reg
- */
-#define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENC_C (1 << ARMV7_CCNT)
-
-/*
- * EVTSEL: Event selection reg
- */
-#define ARMV7_EVTSEL_MASK 0xff /* Mask for writable bits */
-
-/*
- * SELECT: Counter selection reg
- */
-#define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */
-
-/*
- * FLAG: counters overflow flag status reg
- */
-#define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_FLAG_C (1 << ARMV7_CCNT)
-#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */
-#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK
-
-static inline unsigned long armv7_pmnc_read(void)
-{
- u32 val;
- asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
- return val;
-}
-
-static inline void armv7_pmnc_write(unsigned long val)
-{
- val &= ARMV7_PMNC_MASK;
- asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
-}
-
-static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
-{
- return pmnc & ARMV7_OVERFLOWED_MASK;
-}
-
-static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
- enum armv7_counters counter)
-{
- int ret = 0;
-
- if (counter == ARMV7_CYCLE_COUNTER)
- ret = pmnc & ARMV7_FLAG_C;
- else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST))
- ret = pmnc & ARMV7_FLAG_P(counter);
- else
- pr_err("CPU%u checking wrong counter %d overflow status\n",
- smp_processor_id(), counter);
-
- return ret;
-}
-
-static inline int armv7_pmnc_select_counter(unsigned int idx)
-{
- u32 val;
-
- if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) {
- pr_err("CPU%u selecting wrong PMNC counter"
- " %d\n", smp_processor_id(), idx);
- return -1;
- }
-
- val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
- asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
-
- return idx;
-}
-
-static inline u32 armv7pmu_read_counter(int idx)
-{
- unsigned long value = 0;
-
- if (idx == ARMV7_CYCLE_COUNTER)
- asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
- else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
- if (armv7_pmnc_select_counter(idx) == idx)
- asm volatile("mrc p15, 0, %0, c9, c13, 2"
- : "=r" (value));
- } else
- pr_err("CPU%u reading wrong counter %d\n",
- smp_processor_id(), idx);
-
- return value;
-}
-
-static inline void armv7pmu_write_counter(int idx, u32 value)
-{
- if (idx == ARMV7_CYCLE_COUNTER)
- asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
- else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
- if (armv7_pmnc_select_counter(idx) == idx)
- asm volatile("mcr p15, 0, %0, c9, c13, 2"
- : : "r" (value));
- } else
- pr_err("CPU%u writing wrong counter %d\n",
- smp_processor_id(), idx);
-}
-
-static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val)
-{
- if (armv7_pmnc_select_counter(idx) == idx) {
- val &= ARMV7_EVTSEL_MASK;
- asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
- }
-}
-
-static inline u32 armv7_pmnc_enable_counter(unsigned int idx)
-{
- u32 val;
-
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u enabling wrong PMNC counter"
- " %d\n", smp_processor_id(), idx);
- return -1;
- }
-
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_CNTENS_C;
- else
- val = ARMV7_CNTENS_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
-
- return idx;
-}
-
-static inline u32 armv7_pmnc_disable_counter(unsigned int idx)
-{
- u32 val;
-
-
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u disabling wrong PMNC counter"
- " %d\n", smp_processor_id(), idx);
- return -1;
- }
-
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_CNTENC_C;
- else
- val = ARMV7_CNTENC_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
-
- return idx;
-}
-
-static inline u32 armv7_pmnc_enable_intens(unsigned int idx)
-{
- u32 val;
-
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u enabling wrong PMNC counter"
- " interrupt enable %d\n", smp_processor_id(), idx);
- return -1;
- }
-
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_INTENS_C;
- else
- val = ARMV7_INTENS_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
-
- return idx;
-}
-
-static inline u32 armv7_pmnc_disable_intens(unsigned int idx)
-{
- u32 val;
-
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u disabling wrong PMNC counter"
- " interrupt enable %d\n", smp_processor_id(), idx);
- return -1;
- }
-
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_INTENC_C;
- else
- val = ARMV7_INTENC_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val));
-
- return idx;
-}
-
-static inline u32 armv7_pmnc_getreset_flags(void)
-{
- u32 val;
-
- /* Read */
- asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
-
- /* Write to clear flags */
- val &= ARMV7_FLAG_MASK;
- asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
-
- return val;
-}
-
-#ifdef DEBUG
-static void armv7_pmnc_dump_regs(void)
-{
- u32 val;
- unsigned int cnt;
-
- printk(KERN_INFO "PMNC registers dump:\n");
-
- asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
- printk(KERN_INFO "PMNC =0x%08x\n", val);
-
- asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
- printk(KERN_INFO "CNTENS=0x%08x\n", val);
-
- asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
- printk(KERN_INFO "INTENS=0x%08x\n", val);
-
- asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
- printk(KERN_INFO "FLAGS =0x%08x\n", val);
-
- asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
- printk(KERN_INFO "SELECT=0x%08x\n", val);
-
- asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
- printk(KERN_INFO "CCNT =0x%08x\n", val);
-
- for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) {
- armv7_pmnc_select_counter(cnt);
- asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
- printk(KERN_INFO "CNT[%d] count =0x%08x\n",
- cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
- asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
- printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
- cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
- }
-}
-#endif
-
-void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
- unsigned long flags;
-
- /*
- * Enable counter and interrupt, and set the counter to count
- * the event that we're interested in.
- */
- spin_lock_irqsave(&pmu_lock, flags);
-
- /*
- * Disable counter
- */
- armv7_pmnc_disable_counter(idx);
-
- /*
- * Set event (if destined for PMNx counters)
- * We don't need to set the event if it's a cycle count
- */
- if (idx != ARMV7_CYCLE_COUNTER)
- armv7_pmnc_write_evtsel(idx, hwc->config_base);
-
- /*
- * Enable interrupt for this counter
- */
- armv7_pmnc_enable_intens(idx);
-
- /*
- * Enable counter
- */
- armv7_pmnc_enable_counter(idx);
-
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
-{
- unsigned long flags;
-
- /*
- * Disable counter and interrupt
- */
- spin_lock_irqsave(&pmu_lock, flags);
-
- /*
- * Disable counter
- */
- armv7_pmnc_disable_counter(idx);
-
- /*
- * Disable interrupt for this counter
- */
- armv7_pmnc_disable_intens(idx);
-
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
-{
- unsigned long pmnc;
- struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
- struct pt_regs *regs;
- int idx;
-
- /*
- * Get and reset the IRQ flags
- */
- pmnc = armv7_pmnc_getreset_flags();
-
- /*
- * Did an overflow occur?
- */
- if (!armv7_pmnc_has_overflowed(pmnc))
- return IRQ_NONE;
-
- /*
- * Handle the counter(s) overflow(s)
- */
- regs = get_irq_regs();
-
- perf_sample_data_init(&data, 0);
-
- cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
- struct perf_event *event = cpuc->events[idx];
- struct hw_perf_event *hwc;
-
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
- /*
- * We have a single interrupt for all counters. Check that
- * each counter has overflowed before we process it.
- */
- if (!armv7_pmnc_counter_has_overflowed(pmnc, idx))
- continue;
-
- hwc = &event->hw;
- armpmu_event_update(event, hwc, idx);
- data.period = event->hw.last_period;
- if (!armpmu_event_set_period(event, hwc, idx))
- continue;
-
- if (perf_event_overflow(event, 0, &data, regs))
- armpmu->disable(hwc, idx);
- }
-
- /*
- * Handle the pending perf events.
- *
- * Note: this call *must* be run with interrupts disabled. For
- * platforms that can have the PMU interrupts raised as an NMI, this
- * will not work.
- */
- irq_work_run();
-
- return IRQ_HANDLED;
-}
-
-static void armv7pmu_start(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&pmu_lock, flags);
- /* Enable all counters */
- armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void armv7pmu_stop(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&pmu_lock, flags);
- /* Disable all counters */
- armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static inline int armv7_a8_pmu_event_map(int config)
-{
- int mapping = armv7_a8_perf_map[config];
- if (HW_OP_UNSUPPORTED == mapping)
- mapping = -EOPNOTSUPP;
- return mapping;
-}
-
-static inline int armv7_a9_pmu_event_map(int config)
-{
- int mapping = armv7_a9_perf_map[config];
- if (HW_OP_UNSUPPORTED == mapping)
- mapping = -EOPNOTSUPP;
- return mapping;
-}
-
-static u64 armv7pmu_raw_event(u64 config)
-{
- return config & 0xff;
-}
-
-static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
- struct hw_perf_event *event)
-{
- int idx;
-
- /* Always place a cycle counter into the cycle counter. */
- if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) {
- if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask))
- return -EAGAIN;
-
- return ARMV7_CYCLE_COUNTER;
- } else {
- /*
- * For anything other than a cycle counter, try and use
- * the events counters
- */
- for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) {
- if (!test_and_set_bit(idx, cpuc->used_mask))
- return idx;
- }
-
- /* The counters are all in use. */
- return -EAGAIN;
- }
-}
-
-static struct arm_pmu armv7pmu = {
- .handle_irq = armv7pmu_handle_irq,
- .enable = armv7pmu_enable_event,
- .disable = armv7pmu_disable_event,
- .raw_event = armv7pmu_raw_event,
- .read_counter = armv7pmu_read_counter,
- .write_counter = armv7pmu_write_counter,
- .get_event_idx = armv7pmu_get_event_idx,
- .start = armv7pmu_start,
- .stop = armv7pmu_stop,
- .max_period = (1LLU << 32) - 1,
-};
-
-static u32 __init armv7_reset_read_pmnc(void)
-{
- u32 nb_cnt;
-
- /* Initialize & Reset PMNC: C and P bits */
- armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
-
- /* Read the nb of CNTx counters supported from PMNC */
- nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
-
- /* Add the CPU cycles counter and return */
- return nb_cnt + 1;
-}
-
-/*
- * ARMv5 [xscale] Performance counter handling code.
- *
- * Based on xscale OProfile code.
- *
- * There are two variants of the xscale PMU that we support:
- * - xscale1pmu: 2 event counters and a cycle counter
- * - xscale2pmu: 4 event counters and a cycle counter
- * The two variants share event definitions, but have different
- * PMU structures.
- */
-
-enum xscale_perf_types {
- XSCALE_PERFCTR_ICACHE_MISS = 0x00,
- XSCALE_PERFCTR_ICACHE_NO_DELIVER = 0x01,
- XSCALE_PERFCTR_DATA_STALL = 0x02,
- XSCALE_PERFCTR_ITLB_MISS = 0x03,
- XSCALE_PERFCTR_DTLB_MISS = 0x04,
- XSCALE_PERFCTR_BRANCH = 0x05,
- XSCALE_PERFCTR_BRANCH_MISS = 0x06,
- XSCALE_PERFCTR_INSTRUCTION = 0x07,
- XSCALE_PERFCTR_DCACHE_FULL_STALL = 0x08,
- XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG = 0x09,
- XSCALE_PERFCTR_DCACHE_ACCESS = 0x0A,
- XSCALE_PERFCTR_DCACHE_MISS = 0x0B,
- XSCALE_PERFCTR_DCACHE_WRITE_BACK = 0x0C,
- XSCALE_PERFCTR_PC_CHANGED = 0x0D,
- XSCALE_PERFCTR_BCU_REQUEST = 0x10,
- XSCALE_PERFCTR_BCU_FULL = 0x11,
- XSCALE_PERFCTR_BCU_DRAIN = 0x12,
- XSCALE_PERFCTR_BCU_ECC_NO_ELOG = 0x14,
- XSCALE_PERFCTR_BCU_1_BIT_ERR = 0x15,
- XSCALE_PERFCTR_RMW = 0x16,
- /* XSCALE_PERFCTR_CCNT is not hardware defined */
- XSCALE_PERFCTR_CCNT = 0xFE,
- XSCALE_PERFCTR_UNUSED = 0xFF,
-};
-
-enum xscale_counters {
- XSCALE_CYCLE_COUNTER = 1,
- XSCALE_COUNTER0,
- XSCALE_COUNTER1,
- XSCALE_COUNTER2,
- XSCALE_COUNTER3,
-};
-
-static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT,
- [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH,
- [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS,
- [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
-};
-
-static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
- [C(L1D)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(L1I)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(LL)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(DTLB)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(ITLB)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(BPU)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
-};
-
-#define XSCALE_PMU_ENABLE 0x001
-#define XSCALE_PMN_RESET 0x002
-#define XSCALE_CCNT_RESET 0x004
-#define XSCALE_PMU_RESET (CCNT_RESET | PMN_RESET)
-#define XSCALE_PMU_CNT64 0x008
-
-static inline int
-xscalepmu_event_map(int config)
-{
- int mapping = xscale_perf_map[config];
- if (HW_OP_UNSUPPORTED == mapping)
- mapping = -EOPNOTSUPP;
- return mapping;
-}
-
-static u64
-xscalepmu_raw_event(u64 config)
-{
- return config & 0xff;
-}
-
-#define XSCALE1_OVERFLOWED_MASK 0x700
-#define XSCALE1_CCOUNT_OVERFLOW 0x400
-#define XSCALE1_COUNT0_OVERFLOW 0x100
-#define XSCALE1_COUNT1_OVERFLOW 0x200
-#define XSCALE1_CCOUNT_INT_EN 0x040
-#define XSCALE1_COUNT0_INT_EN 0x010
-#define XSCALE1_COUNT1_INT_EN 0x020
-#define XSCALE1_COUNT0_EVT_SHFT 12
-#define XSCALE1_COUNT0_EVT_MASK (0xff << XSCALE1_COUNT0_EVT_SHFT)
-#define XSCALE1_COUNT1_EVT_SHFT 20
-#define XSCALE1_COUNT1_EVT_MASK (0xff << XSCALE1_COUNT1_EVT_SHFT)
-
-static inline u32
-xscale1pmu_read_pmnc(void)
-{
- u32 val;
- asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
- return val;
-}
-
-static inline void
-xscale1pmu_write_pmnc(u32 val)
-{
- /* upper 4bits and 7, 11 are write-as-0 */
- val &= 0xffff77f;
- asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
-}
-
-static inline int
-xscale1_pmnc_counter_has_overflowed(unsigned long pmnc,
- enum xscale_counters counter)
-{
- int ret = 0;
-
- switch (counter) {
- case XSCALE_CYCLE_COUNTER:
- ret = pmnc & XSCALE1_CCOUNT_OVERFLOW;
- break;
- case XSCALE_COUNTER0:
- ret = pmnc & XSCALE1_COUNT0_OVERFLOW;
- break;
- case XSCALE_COUNTER1:
- ret = pmnc & XSCALE1_COUNT1_OVERFLOW;
- break;
- default:
- WARN_ONCE(1, "invalid counter number (%d)\n", counter);
- }
-
- return ret;
-}
-
-static irqreturn_t
-xscale1pmu_handle_irq(int irq_num, void *dev)
-{
- unsigned long pmnc;
- struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
- struct pt_regs *regs;
- int idx;
-
- /*
- * NOTE: there's an A stepping erratum that states if an overflow
- * bit already exists and another occurs, the previous
- * Overflow bit gets cleared. There's no workaround.
- * Fixed in B stepping or later.
- */
- pmnc = xscale1pmu_read_pmnc();
-
- /*
- * Write the value back to clear the overflow flags. Overflow
- * flags remain in pmnc for use below. We also disable the PMU
- * while we process the interrupt.
- */
- xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
-
- if (!(pmnc & XSCALE1_OVERFLOWED_MASK))
- return IRQ_NONE;
-
- regs = get_irq_regs();
-
- perf_sample_data_init(&data, 0);
-
- cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
- struct perf_event *event = cpuc->events[idx];
- struct hw_perf_event *hwc;
-
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
- if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
- continue;
-
- hwc = &event->hw;
- armpmu_event_update(event, hwc, idx);
- data.period = event->hw.last_period;
- if (!armpmu_event_set_period(event, hwc, idx))
- continue;
-
- if (perf_event_overflow(event, 0, &data, regs))
- armpmu->disable(hwc, idx);
- }
-
- irq_work_run();
-
- /*
- * Re-enable the PMU.
- */
- pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE;
- xscale1pmu_write_pmnc(pmnc);
-
- return IRQ_HANDLED;
-}
-
-static void
-xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
- unsigned long val, mask, evt, flags;
-
- switch (idx) {
- case XSCALE_CYCLE_COUNTER:
- mask = 0;
- evt = XSCALE1_CCOUNT_INT_EN;
- break;
- case XSCALE_COUNTER0:
- mask = XSCALE1_COUNT0_EVT_MASK;
- evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) |
- XSCALE1_COUNT0_INT_EN;
- break;
- case XSCALE_COUNTER1:
- mask = XSCALE1_COUNT1_EVT_MASK;
- evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) |
- XSCALE1_COUNT1_INT_EN;
- break;
- default:
- WARN_ONCE(1, "invalid counter number (%d)\n", idx);
- return;
- }
-
- spin_lock_irqsave(&pmu_lock, flags);
- val = xscale1pmu_read_pmnc();
- val &= ~mask;
- val |= evt;
- xscale1pmu_write_pmnc(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx)
-{
- unsigned long val, mask, evt, flags;
-
- switch (idx) {
- case XSCALE_CYCLE_COUNTER:
- mask = XSCALE1_CCOUNT_INT_EN;
- evt = 0;
- break;
- case XSCALE_COUNTER0:
- mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK;
- evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT;
- break;
- case XSCALE_COUNTER1:
- mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK;
- evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT;
- break;
- default:
- WARN_ONCE(1, "invalid counter number (%d)\n", idx);
- return;
- }
-
- spin_lock_irqsave(&pmu_lock, flags);
- val = xscale1pmu_read_pmnc();
- val &= ~mask;
- val |= evt;
- xscale1pmu_write_pmnc(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static int
-xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc,
- struct hw_perf_event *event)
-{
- if (XSCALE_PERFCTR_CCNT == event->config_base) {
- if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask))
- return -EAGAIN;
-
- return XSCALE_CYCLE_COUNTER;
- } else {
- if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask)) {
- return XSCALE_COUNTER1;
- }
-
- if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask)) {
- return XSCALE_COUNTER0;
- }
-
- return -EAGAIN;
- }
-}
-
-static void
-xscale1pmu_start(void)
-{
- unsigned long flags, val;
-
- spin_lock_irqsave(&pmu_lock, flags);
- val = xscale1pmu_read_pmnc();
- val |= XSCALE_PMU_ENABLE;
- xscale1pmu_write_pmnc(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale1pmu_stop(void)
-{
- unsigned long flags, val;
-
- spin_lock_irqsave(&pmu_lock, flags);
- val = xscale1pmu_read_pmnc();
- val &= ~XSCALE_PMU_ENABLE;
- xscale1pmu_write_pmnc(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static inline u32
-xscale1pmu_read_counter(int counter)
-{
- u32 val = 0;
-
- switch (counter) {
- case XSCALE_CYCLE_COUNTER:
- asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
- break;
- case XSCALE_COUNTER0:
- asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
- break;
- case XSCALE_COUNTER1:
- asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
- break;
- }
-
- return val;
-}
-
-static inline void
-xscale1pmu_write_counter(int counter, u32 val)
-{
- switch (counter) {
- case XSCALE_CYCLE_COUNTER:
- asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
- break;
- case XSCALE_COUNTER0:
- asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
- break;
- case XSCALE_COUNTER1:
- asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
- break;
- }
-}
-
-static const struct arm_pmu xscale1pmu = {
- .id = ARM_PERF_PMU_ID_XSCALE1,
- .handle_irq = xscale1pmu_handle_irq,
- .enable = xscale1pmu_enable_event,
- .disable = xscale1pmu_disable_event,
- .event_map = xscalepmu_event_map,
- .raw_event = xscalepmu_raw_event,
- .read_counter = xscale1pmu_read_counter,
- .write_counter = xscale1pmu_write_counter,
- .get_event_idx = xscale1pmu_get_event_idx,
- .start = xscale1pmu_start,
- .stop = xscale1pmu_stop,
- .num_events = 3,
- .max_period = (1LLU << 32) - 1,
-};
-
-#define XSCALE2_OVERFLOWED_MASK 0x01f
-#define XSCALE2_CCOUNT_OVERFLOW 0x001
-#define XSCALE2_COUNT0_OVERFLOW 0x002
-#define XSCALE2_COUNT1_OVERFLOW 0x004
-#define XSCALE2_COUNT2_OVERFLOW 0x008
-#define XSCALE2_COUNT3_OVERFLOW 0x010
-#define XSCALE2_CCOUNT_INT_EN 0x001
-#define XSCALE2_COUNT0_INT_EN 0x002
-#define XSCALE2_COUNT1_INT_EN 0x004
-#define XSCALE2_COUNT2_INT_EN 0x008
-#define XSCALE2_COUNT3_INT_EN 0x010
-#define XSCALE2_COUNT0_EVT_SHFT 0
-#define XSCALE2_COUNT0_EVT_MASK (0xff << XSCALE2_COUNT0_EVT_SHFT)
-#define XSCALE2_COUNT1_EVT_SHFT 8
-#define XSCALE2_COUNT1_EVT_MASK (0xff << XSCALE2_COUNT1_EVT_SHFT)
-#define XSCALE2_COUNT2_EVT_SHFT 16
-#define XSCALE2_COUNT2_EVT_MASK (0xff << XSCALE2_COUNT2_EVT_SHFT)
-#define XSCALE2_COUNT3_EVT_SHFT 24
-#define XSCALE2_COUNT3_EVT_MASK (0xff << XSCALE2_COUNT3_EVT_SHFT)
-
-static inline u32
-xscale2pmu_read_pmnc(void)
-{
- u32 val;
- asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
- /* bits 1-2 and 4-23 are read-unpredictable */
- return val & 0xff000009;
-}
-
-static inline void
-xscale2pmu_write_pmnc(u32 val)
-{
- /* bits 4-23 are write-as-0, 24-31 are write ignored */
- val &= 0xf;
- asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
-}
-
-static inline u32
-xscale2pmu_read_overflow_flags(void)
-{
- u32 val;
- asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val));
- return val;
-}
-
-static inline void
-xscale2pmu_write_overflow_flags(u32 val)
-{
- asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val));
-}
-
-static inline u32
-xscale2pmu_read_event_select(void)
-{
- u32 val;
- asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val));
- return val;
-}
-
-static inline void
-xscale2pmu_write_event_select(u32 val)
-{
- asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val));
-}
-
-static inline u32
-xscale2pmu_read_int_enable(void)
-{
- u32 val;
- asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val));
- return val;
-}
-
-static void
-xscale2pmu_write_int_enable(u32 val)
-{
- asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val));
-}
-
-static inline int
-xscale2_pmnc_counter_has_overflowed(unsigned long of_flags,
- enum xscale_counters counter)
-{
- int ret = 0;
-
- switch (counter) {
- case XSCALE_CYCLE_COUNTER:
- ret = of_flags & XSCALE2_CCOUNT_OVERFLOW;
- break;
- case XSCALE_COUNTER0:
- ret = of_flags & XSCALE2_COUNT0_OVERFLOW;
- break;
- case XSCALE_COUNTER1:
- ret = of_flags & XSCALE2_COUNT1_OVERFLOW;
- break;
- case XSCALE_COUNTER2:
- ret = of_flags & XSCALE2_COUNT2_OVERFLOW;
- break;
- case XSCALE_COUNTER3:
- ret = of_flags & XSCALE2_COUNT3_OVERFLOW;
- break;
- default:
- WARN_ONCE(1, "invalid counter number (%d)\n", counter);
- }
-
- return ret;
-}
-
-static irqreturn_t
-xscale2pmu_handle_irq(int irq_num, void *dev)
-{
- unsigned long pmnc, of_flags;
- struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
- struct pt_regs *regs;
- int idx;
-
- /* Disable the PMU. */
- pmnc = xscale2pmu_read_pmnc();
- xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
-
- /* Check the overflow flag register. */
- of_flags = xscale2pmu_read_overflow_flags();
- if (!(of_flags & XSCALE2_OVERFLOWED_MASK))
- return IRQ_NONE;
-
- /* Clear the overflow bits. */
- xscale2pmu_write_overflow_flags(of_flags);
-
- regs = get_irq_regs();
-
- perf_sample_data_init(&data, 0);
-
- cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
- struct perf_event *event = cpuc->events[idx];
- struct hw_perf_event *hwc;
-
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
- if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
- continue;
-
- hwc = &event->hw;
- armpmu_event_update(event, hwc, idx);
- data.period = event->hw.last_period;
- if (!armpmu_event_set_period(event, hwc, idx))
- continue;
-
- if (perf_event_overflow(event, 0, &data, regs))
- armpmu->disable(hwc, idx);
- }
-
- irq_work_run();
-
- /*
- * Re-enable the PMU.
- */
- pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE;
- xscale2pmu_write_pmnc(pmnc);
-
- return IRQ_HANDLED;
-}
-
-static void
-xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
- unsigned long flags, ien, evtsel;
-
- ien = xscale2pmu_read_int_enable();
- evtsel = xscale2pmu_read_event_select();
-
- switch (idx) {
- case XSCALE_CYCLE_COUNTER:
- ien |= XSCALE2_CCOUNT_INT_EN;
- break;
- case XSCALE_COUNTER0:
- ien |= XSCALE2_COUNT0_INT_EN;
- evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
- evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT;
- break;
- case XSCALE_COUNTER1:
- ien |= XSCALE2_COUNT1_INT_EN;
- evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
- evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT;
- break;
- case XSCALE_COUNTER2:
- ien |= XSCALE2_COUNT2_INT_EN;
- evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
- evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT;
- break;
- case XSCALE_COUNTER3:
- ien |= XSCALE2_COUNT3_INT_EN;
- evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
- evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT;
- break;
- default:
- WARN_ONCE(1, "invalid counter number (%d)\n", idx);
- return;
- }
-
- spin_lock_irqsave(&pmu_lock, flags);
- xscale2pmu_write_event_select(evtsel);
- xscale2pmu_write_int_enable(ien);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
-{
- unsigned long flags, ien, evtsel;
-
- ien = xscale2pmu_read_int_enable();
- evtsel = xscale2pmu_read_event_select();
-
- switch (idx) {
- case XSCALE_CYCLE_COUNTER:
- ien &= ~XSCALE2_CCOUNT_INT_EN;
- break;
- case XSCALE_COUNTER0:
- ien &= ~XSCALE2_COUNT0_INT_EN;
- evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
- evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
- break;
- case XSCALE_COUNTER1:
- ien &= ~XSCALE2_COUNT1_INT_EN;
- evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
- evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
- break;
- case XSCALE_COUNTER2:
- ien &= ~XSCALE2_COUNT2_INT_EN;
- evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
- evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
- break;
- case XSCALE_COUNTER3:
- ien &= ~XSCALE2_COUNT3_INT_EN;
- evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
- evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
- break;
- default:
- WARN_ONCE(1, "invalid counter number (%d)\n", idx);
- return;
- }
-
- spin_lock_irqsave(&pmu_lock, flags);
- xscale2pmu_write_event_select(evtsel);
- xscale2pmu_write_int_enable(ien);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static int
-xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc,
- struct hw_perf_event *event)
-{
- int idx = xscale1pmu_get_event_idx(cpuc, event);
- if (idx >= 0)
- goto out;
-
- if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask))
- idx = XSCALE_COUNTER3;
- else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask))
- idx = XSCALE_COUNTER2;
-out:
- return idx;
-}
-
-static void
-xscale2pmu_start(void)
-{
- unsigned long flags, val;
-
- spin_lock_irqsave(&pmu_lock, flags);
- val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
- val |= XSCALE_PMU_ENABLE;
- xscale2pmu_write_pmnc(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale2pmu_stop(void)
-{
- unsigned long flags, val;
-
- spin_lock_irqsave(&pmu_lock, flags);
- val = xscale2pmu_read_pmnc();
- val &= ~XSCALE_PMU_ENABLE;
- xscale2pmu_write_pmnc(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static inline u32
-xscale2pmu_read_counter(int counter)
-{
- u32 val = 0;
-
- switch (counter) {
- case XSCALE_CYCLE_COUNTER:
- asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
- break;
- case XSCALE_COUNTER0:
- asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
- break;
- case XSCALE_COUNTER1:
- asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
- break;
- case XSCALE_COUNTER2:
- asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
- break;
- case XSCALE_COUNTER3:
- asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
- break;
- }
-
- return val;
-}
-
-static inline void
-xscale2pmu_write_counter(int counter, u32 val)
-{
- switch (counter) {
- case XSCALE_CYCLE_COUNTER:
- asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
- break;
- case XSCALE_COUNTER0:
- asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
- break;
- case XSCALE_COUNTER1:
- asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
- break;
- case XSCALE_COUNTER2:
- asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
- break;
- case XSCALE_COUNTER3:
- asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
- break;
- }
-}
-
-static const struct arm_pmu xscale2pmu = {
- .id = ARM_PERF_PMU_ID_XSCALE2,
- .handle_irq = xscale2pmu_handle_irq,
- .enable = xscale2pmu_enable_event,
- .disable = xscale2pmu_disable_event,
- .event_map = xscalepmu_event_map,
- .raw_event = xscalepmu_raw_event,
- .read_counter = xscale2pmu_read_counter,
- .write_counter = xscale2pmu_write_counter,
- .get_event_idx = xscale2pmu_get_event_idx,
- .start = xscale2pmu_start,
- .stop = xscale2pmu_stop,
- .num_events = 5,
- .max_period = (1LLU << 32) - 1,
-};
+/* Include the PMU-specific implementations. */
+#include "perf_event_xscale.c"
+#include "perf_event_v6.c"
+#include "perf_event_v7.c"
static int __init
init_hw_perf_events(void)
@@ -2977,37 +622,16 @@
case 0xB360: /* ARM1136 */
case 0xB560: /* ARM1156 */
case 0xB760: /* ARM1176 */
- armpmu = &armv6pmu;
- memcpy(armpmu_perf_cache_map, armv6_perf_cache_map,
- sizeof(armv6_perf_cache_map));
+ armpmu = armv6pmu_init();
break;
case 0xB020: /* ARM11mpcore */
- armpmu = &armv6mpcore_pmu;
- memcpy(armpmu_perf_cache_map,
- armv6mpcore_perf_cache_map,
- sizeof(armv6mpcore_perf_cache_map));
+ armpmu = armv6mpcore_pmu_init();
break;
case 0xC080: /* Cortex-A8 */
- armv7pmu.id = ARM_PERF_PMU_ID_CA8;
- memcpy(armpmu_perf_cache_map, armv7_a8_perf_cache_map,
- sizeof(armv7_a8_perf_cache_map));
- armv7pmu.event_map = armv7_a8_pmu_event_map;
- armpmu = &armv7pmu;
-
- /* Reset PMNC and read the nb of CNTx counters
- supported */
- armv7pmu.num_events = armv7_reset_read_pmnc();
+ armpmu = armv7_a8_pmu_init();
break;
case 0xC090: /* Cortex-A9 */
- armv7pmu.id = ARM_PERF_PMU_ID_CA9;
- memcpy(armpmu_perf_cache_map, armv7_a9_perf_cache_map,
- sizeof(armv7_a9_perf_cache_map));
- armv7pmu.event_map = armv7_a9_pmu_event_map;
- armpmu = &armv7pmu;
-
- /* Reset PMNC and read the nb of CNTx counters
- supported */
- armv7pmu.num_events = armv7_reset_read_pmnc();
+ armpmu = armv7_a9_pmu_init();
break;
}
/* Intel CPUs [xscale]. */
@@ -3015,21 +639,17 @@
part_number = (cpuid >> 13) & 0x7;
switch (part_number) {
case 1:
- armpmu = &xscale1pmu;
- memcpy(armpmu_perf_cache_map, xscale_perf_cache_map,
- sizeof(xscale_perf_cache_map));
+ armpmu = xscale1pmu_init();
break;
case 2:
- armpmu = &xscale2pmu;
- memcpy(armpmu_perf_cache_map, xscale_perf_cache_map,
- sizeof(xscale_perf_cache_map));
+ armpmu = xscale2pmu_init();
break;
}
}
if (armpmu) {
pr_info("enabled with %s PMU driver, %d counters available\n",
- arm_pmu_names[armpmu->id], armpmu->num_events);
+ armpmu->name, armpmu->num_events);
} else {
pr_info("no hardware support available\n");
}
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
new file mode 100644
index 0000000..7aeb07d
--- /dev/null
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -0,0 +1,672 @@
+/*
+ * ARMv6 Performance counter handling code.
+ *
+ * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
+ *
+ * ARMv6 has 2 configurable performance counters and a single cycle counter.
+ * They all share a single reset bit but can be written to zero so we can use
+ * that for a reset.
+ *
+ * The counters can't be individually enabled or disabled so when we remove
+ * one event and replace it with another we could get spurious counts from the
+ * wrong event. However, we can take advantage of the fact that the
+ * performance counters can export events to the event bus, and the event bus
+ * itself can be monitored. This requires that we *don't* export the events to
+ * the event bus. The procedure for disabling a configurable counter is:
+ * - change the counter to count the ETMEXTOUT[0] signal (0x20). This
+ * effectively stops the counter from counting.
+ * - disable the counter's interrupt generation (each counter has it's
+ * own interrupt enable bit).
+ * Once stopped, the counter value can be written as 0 to reset.
+ *
+ * To enable a counter:
+ * - enable the counter's interrupt generation.
+ * - set the new event type.
+ *
+ * Note: the dedicated cycle counter only counts cycles and can't be
+ * enabled/disabled independently of the others. When we want to disable the
+ * cycle counter, we have to just disable the interrupt reporting and start
+ * ignoring that counter. When re-enabling, we have to reset the value and
+ * enable the interrupt.
+ */
+
+#ifdef CONFIG_CPU_V6
+enum armv6_perf_types {
+ ARMV6_PERFCTR_ICACHE_MISS = 0x0,
+ ARMV6_PERFCTR_IBUF_STALL = 0x1,
+ ARMV6_PERFCTR_DDEP_STALL = 0x2,
+ ARMV6_PERFCTR_ITLB_MISS = 0x3,
+ ARMV6_PERFCTR_DTLB_MISS = 0x4,
+ ARMV6_PERFCTR_BR_EXEC = 0x5,
+ ARMV6_PERFCTR_BR_MISPREDICT = 0x6,
+ ARMV6_PERFCTR_INSTR_EXEC = 0x7,
+ ARMV6_PERFCTR_DCACHE_HIT = 0x9,
+ ARMV6_PERFCTR_DCACHE_ACCESS = 0xA,
+ ARMV6_PERFCTR_DCACHE_MISS = 0xB,
+ ARMV6_PERFCTR_DCACHE_WBACK = 0xC,
+ ARMV6_PERFCTR_SW_PC_CHANGE = 0xD,
+ ARMV6_PERFCTR_MAIN_TLB_MISS = 0xF,
+ ARMV6_PERFCTR_EXPL_D_ACCESS = 0x10,
+ ARMV6_PERFCTR_LSU_FULL_STALL = 0x11,
+ ARMV6_PERFCTR_WBUF_DRAINED = 0x12,
+ ARMV6_PERFCTR_CPU_CYCLES = 0xFF,
+ ARMV6_PERFCTR_NOP = 0x20,
+};
+
+enum armv6_counters {
+ ARMV6_CYCLE_COUNTER = 1,
+ ARMV6_COUNTER0,
+ ARMV6_COUNTER1,
+};
+
+/*
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ /*
+ * The performance counters don't differentiate between read
+ * and write accesses/misses so this isn't strictly correct,
+ * but it's the best we can do. Writes and reads get
+ * combined.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ /*
+ * The ARM performance counters can count micro DTLB misses,
+ * micro ITLB misses and main TLB misses. There isn't an event
+ * for TLB misses, so use the micro misses here and if users
+ * want the main TLB misses they can use a raw counter.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+enum armv6mpcore_perf_types {
+ ARMV6MPCORE_PERFCTR_ICACHE_MISS = 0x0,
+ ARMV6MPCORE_PERFCTR_IBUF_STALL = 0x1,
+ ARMV6MPCORE_PERFCTR_DDEP_STALL = 0x2,
+ ARMV6MPCORE_PERFCTR_ITLB_MISS = 0x3,
+ ARMV6MPCORE_PERFCTR_DTLB_MISS = 0x4,
+ ARMV6MPCORE_PERFCTR_BR_EXEC = 0x5,
+ ARMV6MPCORE_PERFCTR_BR_NOTPREDICT = 0x6,
+ ARMV6MPCORE_PERFCTR_BR_MISPREDICT = 0x7,
+ ARMV6MPCORE_PERFCTR_INSTR_EXEC = 0x8,
+ ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
+ ARMV6MPCORE_PERFCTR_DCACHE_RDMISS = 0xB,
+ ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
+ ARMV6MPCORE_PERFCTR_DCACHE_WRMISS = 0xD,
+ ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
+ ARMV6MPCORE_PERFCTR_SW_PC_CHANGE = 0xF,
+ ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS = 0x10,
+ ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
+ ARMV6MPCORE_PERFCTR_LSU_FULL_STALL = 0x12,
+ ARMV6MPCORE_PERFCTR_WBUF_DRAINED = 0x13,
+ ARMV6MPCORE_PERFCTR_CPU_CYCLES = 0xFF,
+};
+
+/*
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
+ [C(RESULT_MISS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
+ [C(RESULT_MISS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ /*
+ * The ARM performance counters can count micro DTLB misses,
+ * micro ITLB misses and main TLB misses. There isn't an event
+ * for TLB misses, so use the micro misses here and if users
+ * want the main TLB misses they can use a raw counter.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+static inline unsigned long
+armv6_pmcr_read(void)
+{
+ u32 val;
+ asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r"(val));
+ return val;
+}
+
+static inline void
+armv6_pmcr_write(unsigned long val)
+{
+ asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r"(val));
+}
+
+#define ARMV6_PMCR_ENABLE (1 << 0)
+#define ARMV6_PMCR_CTR01_RESET (1 << 1)
+#define ARMV6_PMCR_CCOUNT_RESET (1 << 2)
+#define ARMV6_PMCR_CCOUNT_DIV (1 << 3)
+#define ARMV6_PMCR_COUNT0_IEN (1 << 4)
+#define ARMV6_PMCR_COUNT1_IEN (1 << 5)
+#define ARMV6_PMCR_CCOUNT_IEN (1 << 6)
+#define ARMV6_PMCR_COUNT0_OVERFLOW (1 << 8)
+#define ARMV6_PMCR_COUNT1_OVERFLOW (1 << 9)
+#define ARMV6_PMCR_CCOUNT_OVERFLOW (1 << 10)
+#define ARMV6_PMCR_EVT_COUNT0_SHIFT 20
+#define ARMV6_PMCR_EVT_COUNT0_MASK (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
+#define ARMV6_PMCR_EVT_COUNT1_SHIFT 12
+#define ARMV6_PMCR_EVT_COUNT1_MASK (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
+
+#define ARMV6_PMCR_OVERFLOWED_MASK \
+ (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
+ ARMV6_PMCR_CCOUNT_OVERFLOW)
+
+static inline int
+armv6_pmcr_has_overflowed(unsigned long pmcr)
+{
+ return pmcr & ARMV6_PMCR_OVERFLOWED_MASK;
+}
+
+static inline int
+armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
+ enum armv6_counters counter)
+{
+ int ret = 0;
+
+ if (ARMV6_CYCLE_COUNTER == counter)
+ ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
+ else if (ARMV6_COUNTER0 == counter)
+ ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
+ else if (ARMV6_COUNTER1 == counter)
+ ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
+ else
+ WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+
+ return ret;
+}
+
+static inline u32
+armv6pmu_read_counter(int counter)
+{
+ unsigned long value = 0;
+
+ if (ARMV6_CYCLE_COUNTER == counter)
+ asm volatile("mrc p15, 0, %0, c15, c12, 1" : "=r"(value));
+ else if (ARMV6_COUNTER0 == counter)
+ asm volatile("mrc p15, 0, %0, c15, c12, 2" : "=r"(value));
+ else if (ARMV6_COUNTER1 == counter)
+ asm volatile("mrc p15, 0, %0, c15, c12, 3" : "=r"(value));
+ else
+ WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+
+ return value;
+}
+
+static inline void
+armv6pmu_write_counter(int counter,
+ u32 value)
+{
+ if (ARMV6_CYCLE_COUNTER == counter)
+ asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value));
+ else if (ARMV6_COUNTER0 == counter)
+ asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r"(value));
+ else if (ARMV6_COUNTER1 == counter)
+ asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r"(value));
+ else
+ WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+}
+
+void
+armv6pmu_enable_event(struct hw_perf_event *hwc,
+ int idx)
+{
+ unsigned long val, mask, evt, flags;
+
+ if (ARMV6_CYCLE_COUNTER == idx) {
+ mask = 0;
+ evt = ARMV6_PMCR_CCOUNT_IEN;
+ } else if (ARMV6_COUNTER0 == idx) {
+ mask = ARMV6_PMCR_EVT_COUNT0_MASK;
+ evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
+ ARMV6_PMCR_COUNT0_IEN;
+ } else if (ARMV6_COUNTER1 == idx) {
+ mask = ARMV6_PMCR_EVT_COUNT1_MASK;
+ evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
+ ARMV6_PMCR_COUNT1_IEN;
+ } else {
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ /*
+ * Mask out the current event and set the counter to count the event
+ * that we're interested in.
+ */
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~mask;
+ val |= evt;
+ armv6_pmcr_write(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static irqreturn_t
+armv6pmu_handle_irq(int irq_num,
+ void *dev)
+{
+ unsigned long pmcr = armv6_pmcr_read();
+ struct perf_sample_data data;
+ struct cpu_hw_events *cpuc;
+ struct pt_regs *regs;
+ int idx;
+
+ if (!armv6_pmcr_has_overflowed(pmcr))
+ return IRQ_NONE;
+
+ regs = get_irq_regs();
+
+ /*
+ * The interrupts are cleared by writing the overflow flags back to
+ * the control register. All of the other bits don't have any effect
+ * if they are rewritten, so write the whole value back.
+ */
+ armv6_pmcr_write(pmcr);
+
+ perf_sample_data_init(&data, 0);
+
+ cpuc = &__get_cpu_var(cpu_hw_events);
+ for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ struct perf_event *event = cpuc->events[idx];
+ struct hw_perf_event *hwc;
+
+ if (!test_bit(idx, cpuc->active_mask))
+ continue;
+
+ /*
+ * We have a single interrupt for all counters. Check that
+ * each counter has overflowed before we process it.
+ */
+ if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
+ continue;
+
+ hwc = &event->hw;
+ armpmu_event_update(event, hwc, idx);
+ data.period = event->hw.last_period;
+ if (!armpmu_event_set_period(event, hwc, idx))
+ continue;
+
+ if (perf_event_overflow(event, 0, &data, regs))
+ armpmu->disable(hwc, idx);
+ }
+
+ /*
+ * Handle the pending perf events.
+ *
+ * Note: this call *must* be run with interrupts disabled. For
+ * platforms that can have the PMU interrupts raised as an NMI, this
+ * will not work.
+ */
+ irq_work_run();
+
+ return IRQ_HANDLED;
+}
+
+static void
+armv6pmu_start(void)
+{
+ unsigned long flags, val;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val |= ARMV6_PMCR_ENABLE;
+ armv6_pmcr_write(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+armv6pmu_stop(void)
+{
+ unsigned long flags, val;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~ARMV6_PMCR_ENABLE;
+ armv6_pmcr_write(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static int
+armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
+ struct hw_perf_event *event)
+{
+ /* Always place a cycle counter into the cycle counter. */
+ if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) {
+ if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
+ return -EAGAIN;
+
+ return ARMV6_CYCLE_COUNTER;
+ } else {
+ /*
+ * For anything other than a cycle counter, try and use
+ * counter0 and counter1.
+ */
+ if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask))
+ return ARMV6_COUNTER1;
+
+ if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask))
+ return ARMV6_COUNTER0;
+
+ /* The counters are all in use. */
+ return -EAGAIN;
+ }
+}
+
+static void
+armv6pmu_disable_event(struct hw_perf_event *hwc,
+ int idx)
+{
+ unsigned long val, mask, evt, flags;
+
+ if (ARMV6_CYCLE_COUNTER == idx) {
+ mask = ARMV6_PMCR_CCOUNT_IEN;
+ evt = 0;
+ } else if (ARMV6_COUNTER0 == idx) {
+ mask = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
+ evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
+ } else if (ARMV6_COUNTER1 == idx) {
+ mask = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
+ evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
+ } else {
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ /*
+ * Mask out the current event and set the counter to count the number
+ * of ETM bus signal assertion cycles. The external reporting should
+ * be disabled and so this should never increment.
+ */
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~mask;
+ val |= evt;
+ armv6_pmcr_write(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
+ int idx)
+{
+ unsigned long val, mask, flags, evt = 0;
+
+ if (ARMV6_CYCLE_COUNTER == idx) {
+ mask = ARMV6_PMCR_CCOUNT_IEN;
+ } else if (ARMV6_COUNTER0 == idx) {
+ mask = ARMV6_PMCR_COUNT0_IEN;
+ } else if (ARMV6_COUNTER1 == idx) {
+ mask = ARMV6_PMCR_COUNT1_IEN;
+ } else {
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ /*
+ * Unlike UP ARMv6, we don't have a way of stopping the counters. We
+ * simply disable the interrupt reporting.
+ */
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~mask;
+ val |= evt;
+ armv6_pmcr_write(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static const struct arm_pmu armv6pmu = {
+ .id = ARM_PERF_PMU_ID_V6,
+ .name = "v6",
+ .handle_irq = armv6pmu_handle_irq,
+ .enable = armv6pmu_enable_event,
+ .disable = armv6pmu_disable_event,
+ .read_counter = armv6pmu_read_counter,
+ .write_counter = armv6pmu_write_counter,
+ .get_event_idx = armv6pmu_get_event_idx,
+ .start = armv6pmu_start,
+ .stop = armv6pmu_stop,
+ .cache_map = &armv6_perf_cache_map,
+ .event_map = &armv6_perf_map,
+ .raw_event_mask = 0xFF,
+ .num_events = 3,
+ .max_period = (1LLU << 32) - 1,
+};
+
+const struct arm_pmu *__init armv6pmu_init(void)
+{
+ return &armv6pmu;
+}
+
+/*
+ * ARMv6mpcore is almost identical to single core ARMv6 with the exception
+ * that some of the events have different enumerations and that there is no
+ * *hack* to stop the programmable counters. To stop the counters we simply
+ * disable the interrupt reporting and update the event. When unthrottling we
+ * reset the period and enable the interrupt reporting.
+ */
+static const struct arm_pmu armv6mpcore_pmu = {
+ .id = ARM_PERF_PMU_ID_V6MP,
+ .name = "v6mpcore",
+ .handle_irq = armv6pmu_handle_irq,
+ .enable = armv6pmu_enable_event,
+ .disable = armv6mpcore_pmu_disable_event,
+ .read_counter = armv6pmu_read_counter,
+ .write_counter = armv6pmu_write_counter,
+ .get_event_idx = armv6pmu_get_event_idx,
+ .start = armv6pmu_start,
+ .stop = armv6pmu_stop,
+ .cache_map = &armv6mpcore_perf_cache_map,
+ .event_map = &armv6mpcore_perf_map,
+ .raw_event_mask = 0xFF,
+ .num_events = 3,
+ .max_period = (1LLU << 32) - 1,
+};
+
+const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+{
+ return &armv6mpcore_pmu;
+}
+#else
+const struct arm_pmu *__init armv6pmu_init(void)
+{
+ return NULL;
+}
+
+const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+{
+ return NULL;
+}
+#endif /* CONFIG_CPU_V6 */
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
new file mode 100644
index 0000000..4d04239
--- /dev/null
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -0,0 +1,906 @@
+/*
+ * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code.
+ *
+ * ARMv7 support: Jean Pihet <jpihet@mvista.com>
+ * 2010 (c) MontaVista Software, LLC.
+ *
+ * Copied from ARMv6 code, with the low level code inspired
+ * by the ARMv7 Oprofile code.
+ *
+ * Cortex-A8 has up to 4 configurable performance counters and
+ * a single cycle counter.
+ * Cortex-A9 has up to 31 configurable performance counters and
+ * a single cycle counter.
+ *
+ * All counters can be enabled/disabled and IRQ masked separately. The cycle
+ * counter and all 4 performance counters together can be reset separately.
+ */
+
+#ifdef CONFIG_CPU_V7
+/* Common ARMv7 event types */
+enum armv7_perf_types {
+ ARMV7_PERFCTR_PMNC_SW_INCR = 0x00,
+ ARMV7_PERFCTR_IFETCH_MISS = 0x01,
+ ARMV7_PERFCTR_ITLB_MISS = 0x02,
+ ARMV7_PERFCTR_DCACHE_REFILL = 0x03,
+ ARMV7_PERFCTR_DCACHE_ACCESS = 0x04,
+ ARMV7_PERFCTR_DTLB_REFILL = 0x05,
+ ARMV7_PERFCTR_DREAD = 0x06,
+ ARMV7_PERFCTR_DWRITE = 0x07,
+
+ ARMV7_PERFCTR_EXC_TAKEN = 0x09,
+ ARMV7_PERFCTR_EXC_EXECUTED = 0x0A,
+ ARMV7_PERFCTR_CID_WRITE = 0x0B,
+ /* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
+ * It counts:
+ * - all branch instructions,
+ * - instructions that explicitly write the PC,
+ * - exception generating instructions.
+ */
+ ARMV7_PERFCTR_PC_WRITE = 0x0C,
+ ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D,
+ ARMV7_PERFCTR_UNALIGNED_ACCESS = 0x0F,
+ ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10,
+ ARMV7_PERFCTR_CLOCK_CYCLES = 0x11,
+
+ ARMV7_PERFCTR_PC_BRANCH_MIS_USED = 0x12,
+
+ ARMV7_PERFCTR_CPU_CYCLES = 0xFF
+};
+
+/* ARMv7 Cortex-A8 specific event types */
+enum armv7_a8_perf_types {
+ ARMV7_PERFCTR_INSTR_EXECUTED = 0x08,
+
+ ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E,
+
+ ARMV7_PERFCTR_WRITE_BUFFER_FULL = 0x40,
+ ARMV7_PERFCTR_L2_STORE_MERGED = 0x41,
+ ARMV7_PERFCTR_L2_STORE_BUFF = 0x42,
+ ARMV7_PERFCTR_L2_ACCESS = 0x43,
+ ARMV7_PERFCTR_L2_CACH_MISS = 0x44,
+ ARMV7_PERFCTR_AXI_READ_CYCLES = 0x45,
+ ARMV7_PERFCTR_AXI_WRITE_CYCLES = 0x46,
+ ARMV7_PERFCTR_MEMORY_REPLAY = 0x47,
+ ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY = 0x48,
+ ARMV7_PERFCTR_L1_DATA_MISS = 0x49,
+ ARMV7_PERFCTR_L1_INST_MISS = 0x4A,
+ ARMV7_PERFCTR_L1_DATA_COLORING = 0x4B,
+ ARMV7_PERFCTR_L1_NEON_DATA = 0x4C,
+ ARMV7_PERFCTR_L1_NEON_CACH_DATA = 0x4D,
+ ARMV7_PERFCTR_L2_NEON = 0x4E,
+ ARMV7_PERFCTR_L2_NEON_HIT = 0x4F,
+ ARMV7_PERFCTR_L1_INST = 0x50,
+ ARMV7_PERFCTR_PC_RETURN_MIS_PRED = 0x51,
+ ARMV7_PERFCTR_PC_BRANCH_FAILED = 0x52,
+ ARMV7_PERFCTR_PC_BRANCH_TAKEN = 0x53,
+ ARMV7_PERFCTR_PC_BRANCH_EXECUTED = 0x54,
+ ARMV7_PERFCTR_OP_EXECUTED = 0x55,
+ ARMV7_PERFCTR_CYCLES_INST_STALL = 0x56,
+ ARMV7_PERFCTR_CYCLES_INST = 0x57,
+ ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL = 0x58,
+ ARMV7_PERFCTR_CYCLES_NEON_INST_STALL = 0x59,
+ ARMV7_PERFCTR_NEON_CYCLES = 0x5A,
+
+ ARMV7_PERFCTR_PMU0_EVENTS = 0x70,
+ ARMV7_PERFCTR_PMU1_EVENTS = 0x71,
+ ARMV7_PERFCTR_PMU_EVENTS = 0x72,
+};
+
+/* ARMv7 Cortex-A9 specific event types */
+enum armv7_a9_perf_types {
+ ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC = 0x40,
+ ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC = 0x41,
+ ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC = 0x42,
+
+ ARMV7_PERFCTR_COHERENT_LINE_MISS = 0x50,
+ ARMV7_PERFCTR_COHERENT_LINE_HIT = 0x51,
+
+ ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES = 0x60,
+ ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES = 0x61,
+ ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES = 0x62,
+ ARMV7_PERFCTR_STREX_EXECUTED_PASSED = 0x63,
+ ARMV7_PERFCTR_STREX_EXECUTED_FAILED = 0x64,
+ ARMV7_PERFCTR_DATA_EVICTION = 0x65,
+ ARMV7_PERFCTR_ISSUE_STAGE_NO_INST = 0x66,
+ ARMV7_PERFCTR_ISSUE_STAGE_EMPTY = 0x67,
+ ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE = 0x68,
+
+ ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS = 0x6E,
+
+ ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST = 0x70,
+ ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST = 0x71,
+ ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST = 0x72,
+ ARMV7_PERFCTR_FP_EXECUTED_INST = 0x73,
+ ARMV7_PERFCTR_NEON_EXECUTED_INST = 0x74,
+
+ ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES = 0x80,
+ ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES = 0x81,
+ ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES = 0x82,
+ ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES = 0x83,
+ ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES = 0x84,
+ ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES = 0x85,
+ ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES = 0x86,
+
+ ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES = 0x8A,
+ ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES = 0x8B,
+
+ ARMV7_PERFCTR_ISB_INST = 0x90,
+ ARMV7_PERFCTR_DSB_INST = 0x91,
+ ARMV7_PERFCTR_DMB_INST = 0x92,
+ ARMV7_PERFCTR_EXT_INTERRUPTS = 0x93,
+
+ ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED = 0xA0,
+ ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED = 0xA1,
+ ARMV7_PERFCTR_PLE_FIFO_FLUSH = 0xA2,
+ ARMV7_PERFCTR_PLE_RQST_COMPLETED = 0xA3,
+ ARMV7_PERFCTR_PLE_FIFO_OVERFLOW = 0xA4,
+ ARMV7_PERFCTR_PLE_RQST_PROG = 0xA5
+};
+
+/*
+ * Cortex-A8 HW events mapping
+ *
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
+};
+
+static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ /*
+ * The performance counters don't differentiate between read
+ * and write accesses/misses so this isn't strictly correct,
+ * but it's the best we can do. Writes and reads get
+ * combined.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ /*
+ * Only ITLB misses and DTLB refills are supported.
+ * If users want the DTLB refills misses a raw counter
+ * must be used.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+/*
+ * Cortex-A9 HW events mapping
+ */
+static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] =
+ ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_COHERENT_LINE_HIT,
+ [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_COHERENT_LINE_MISS,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
+};
+
+static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ /*
+ * The performance counters don't differentiate between read
+ * and write accesses/misses so this isn't strictly correct,
+ * but it's the best we can do. Writes and reads get
+ * combined.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ /*
+ * Only ITLB misses and DTLB refills are supported.
+ * If users want the DTLB refills misses a raw counter
+ * must be used.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+/*
+ * Perf Events counters
+ */
+enum armv7_counters {
+ ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */
+ ARMV7_COUNTER0 = 2, /* First event counter */
+};
+
+/*
+ * The cycle counter is ARMV7_CYCLE_COUNTER.
+ * The first event counter is ARMV7_COUNTER0.
+ * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1).
+ */
+#define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1)
+
+/*
+ * ARMv7 low level PMNC access
+ */
+
+/*
+ * Per-CPU PMNC: config reg
+ */
+#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */
+#define ARMV7_PMNC_P (1 << 1) /* Reset all counters */
+#define ARMV7_PMNC_C (1 << 2) /* Cycle counter reset */
+#define ARMV7_PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */
+#define ARMV7_PMNC_X (1 << 4) /* Export to ETM */
+#define ARMV7_PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/
+#define ARMV7_PMNC_N_SHIFT 11 /* Number of counters supported */
+#define ARMV7_PMNC_N_MASK 0x1f
+#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */
+
+/*
+ * Available counters
+ */
+#define ARMV7_CNT0 0 /* First event counter */
+#define ARMV7_CCNT 31 /* Cycle counter */
+
+/* Perf Event to low level counters mapping */
+#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0)
+
+/*
+ * CNTENS: counters enable reg
+ */
+#define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_CNTENS_C (1 << ARMV7_CCNT)
+
+/*
+ * CNTENC: counters disable reg
+ */
+#define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_CNTENC_C (1 << ARMV7_CCNT)
+
+/*
+ * INTENS: counters overflow interrupt enable reg
+ */
+#define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_INTENS_C (1 << ARMV7_CCNT)
+
+/*
+ * INTENC: counters overflow interrupt disable reg
+ */
+#define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_INTENC_C (1 << ARMV7_CCNT)
+
+/*
+ * EVTSEL: Event selection reg
+ */
+#define ARMV7_EVTSEL_MASK 0xff /* Mask for writable bits */
+
+/*
+ * SELECT: Counter selection reg
+ */
+#define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */
+
+/*
+ * FLAG: counters overflow flag status reg
+ */
+#define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_FLAG_C (1 << ARMV7_CCNT)
+#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */
+#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK
+
+static inline unsigned long armv7_pmnc_read(void)
+{
+ u32 val;
+ asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
+ return val;
+}
+
+static inline void armv7_pmnc_write(unsigned long val)
+{
+ val &= ARMV7_PMNC_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
+}
+
+static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
+{
+ return pmnc & ARMV7_OVERFLOWED_MASK;
+}
+
+static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
+ enum armv7_counters counter)
+{
+ int ret = 0;
+
+ if (counter == ARMV7_CYCLE_COUNTER)
+ ret = pmnc & ARMV7_FLAG_C;
+ else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST))
+ ret = pmnc & ARMV7_FLAG_P(counter);
+ else
+ pr_err("CPU%u checking wrong counter %d overflow status\n",
+ smp_processor_id(), counter);
+
+ return ret;
+}
+
+static inline int armv7_pmnc_select_counter(unsigned int idx)
+{
+ u32 val;
+
+ if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) {
+ pr_err("CPU%u selecting wrong PMNC counter"
+ " %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7pmu_read_counter(int idx)
+{
+ unsigned long value = 0;
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
+ else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
+ if (armv7_pmnc_select_counter(idx) == idx)
+ asm volatile("mrc p15, 0, %0, c9, c13, 2"
+ : "=r" (value));
+ } else
+ pr_err("CPU%u reading wrong counter %d\n",
+ smp_processor_id(), idx);
+
+ return value;
+}
+
+static inline void armv7pmu_write_counter(int idx, u32 value)
+{
+ if (idx == ARMV7_CYCLE_COUNTER)
+ asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
+ else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
+ if (armv7_pmnc_select_counter(idx) == idx)
+ asm volatile("mcr p15, 0, %0, c9, c13, 2"
+ : : "r" (value));
+ } else
+ pr_err("CPU%u writing wrong counter %d\n",
+ smp_processor_id(), idx);
+}
+
+static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val)
+{
+ if (armv7_pmnc_select_counter(idx) == idx) {
+ val &= ARMV7_EVTSEL_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
+ }
+}
+
+static inline u32 armv7_pmnc_enable_counter(unsigned int idx)
+{
+ u32 val;
+
+ if ((idx != ARMV7_CYCLE_COUNTER) &&
+ ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+ pr_err("CPU%u enabling wrong PMNC counter"
+ " %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ val = ARMV7_CNTENS_C;
+ else
+ val = ARMV7_CNTENS_P(idx);
+
+ asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7_pmnc_disable_counter(unsigned int idx)
+{
+ u32 val;
+
+
+ if ((idx != ARMV7_CYCLE_COUNTER) &&
+ ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+ pr_err("CPU%u disabling wrong PMNC counter"
+ " %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ val = ARMV7_CNTENC_C;
+ else
+ val = ARMV7_CNTENC_P(idx);
+
+ asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7_pmnc_enable_intens(unsigned int idx)
+{
+ u32 val;
+
+ if ((idx != ARMV7_CYCLE_COUNTER) &&
+ ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+ pr_err("CPU%u enabling wrong PMNC counter"
+ " interrupt enable %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ val = ARMV7_INTENS_C;
+ else
+ val = ARMV7_INTENS_P(idx);
+
+ asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7_pmnc_disable_intens(unsigned int idx)
+{
+ u32 val;
+
+ if ((idx != ARMV7_CYCLE_COUNTER) &&
+ ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+ pr_err("CPU%u disabling wrong PMNC counter"
+ " interrupt enable %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ val = ARMV7_INTENC_C;
+ else
+ val = ARMV7_INTENC_P(idx);
+
+ asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7_pmnc_getreset_flags(void)
+{
+ u32 val;
+
+ /* Read */
+ asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
+
+ /* Write to clear flags */
+ val &= ARMV7_FLAG_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
+
+ return val;
+}
+
+#ifdef DEBUG
+static void armv7_pmnc_dump_regs(void)
+{
+ u32 val;
+ unsigned int cnt;
+
+ printk(KERN_INFO "PMNC registers dump:\n");
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
+ printk(KERN_INFO "PMNC =0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
+ printk(KERN_INFO "CNTENS=0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
+ printk(KERN_INFO "INTENS=0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
+ printk(KERN_INFO "FLAGS =0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
+ printk(KERN_INFO "SELECT=0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
+ printk(KERN_INFO "CCNT =0x%08x\n", val);
+
+ for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) {
+ armv7_pmnc_select_counter(cnt);
+ asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
+ printk(KERN_INFO "CNT[%d] count =0x%08x\n",
+ cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+ asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
+ printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
+ cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+ }
+}
+#endif
+
+void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+ unsigned long flags;
+
+ /*
+ * Enable counter and interrupt, and set the counter to count
+ * the event that we're interested in.
+ */
+ spin_lock_irqsave(&pmu_lock, flags);
+
+ /*
+ * Disable counter
+ */
+ armv7_pmnc_disable_counter(idx);
+
+ /*
+ * Set event (if destined for PMNx counters)
+ * We don't need to set the event if it's a cycle count
+ */
+ if (idx != ARMV7_CYCLE_COUNTER)
+ armv7_pmnc_write_evtsel(idx, hwc->config_base);
+
+ /*
+ * Enable interrupt for this counter
+ */
+ armv7_pmnc_enable_intens(idx);
+
+ /*
+ * Enable counter
+ */
+ armv7_pmnc_enable_counter(idx);
+
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+ unsigned long flags;
+
+ /*
+ * Disable counter and interrupt
+ */
+ spin_lock_irqsave(&pmu_lock, flags);
+
+ /*
+ * Disable counter
+ */
+ armv7_pmnc_disable_counter(idx);
+
+ /*
+ * Disable interrupt for this counter
+ */
+ armv7_pmnc_disable_intens(idx);
+
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
+{
+ unsigned long pmnc;
+ struct perf_sample_data data;
+ struct cpu_hw_events *cpuc;
+ struct pt_regs *regs;
+ int idx;
+
+ /*
+ * Get and reset the IRQ flags
+ */
+ pmnc = armv7_pmnc_getreset_flags();
+
+ /*
+ * Did an overflow occur?
+ */
+ if (!armv7_pmnc_has_overflowed(pmnc))
+ return IRQ_NONE;
+
+ /*
+ * Handle the counter(s) overflow(s)
+ */
+ regs = get_irq_regs();
+
+ perf_sample_data_init(&data, 0);
+
+ cpuc = &__get_cpu_var(cpu_hw_events);
+ for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ struct perf_event *event = cpuc->events[idx];
+ struct hw_perf_event *hwc;
+
+ if (!test_bit(idx, cpuc->active_mask))
+ continue;
+
+ /*
+ * We have a single interrupt for all counters. Check that
+ * each counter has overflowed before we process it.
+ */
+ if (!armv7_pmnc_counter_has_overflowed(pmnc, idx))
+ continue;
+
+ hwc = &event->hw;
+ armpmu_event_update(event, hwc, idx);
+ data.period = event->hw.last_period;
+ if (!armpmu_event_set_period(event, hwc, idx))
+ continue;
+
+ if (perf_event_overflow(event, 0, &data, regs))
+ armpmu->disable(hwc, idx);
+ }
+
+ /*
+ * Handle the pending perf events.
+ *
+ * Note: this call *must* be run with interrupts disabled. For
+ * platforms that can have the PMU interrupts raised as an NMI, this
+ * will not work.
+ */
+ irq_work_run();
+
+ return IRQ_HANDLED;
+}
+
+static void armv7pmu_start(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ /* Enable all counters */
+ armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void armv7pmu_stop(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ /* Disable all counters */
+ armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
+ struct hw_perf_event *event)
+{
+ int idx;
+
+ /* Always place a cycle counter into the cycle counter. */
+ if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) {
+ if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask))
+ return -EAGAIN;
+
+ return ARMV7_CYCLE_COUNTER;
+ } else {
+ /*
+ * For anything other than a cycle counter, try and use
+ * the events counters
+ */
+ for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) {
+ if (!test_and_set_bit(idx, cpuc->used_mask))
+ return idx;
+ }
+
+ /* The counters are all in use. */
+ return -EAGAIN;
+ }
+}
+
+static struct arm_pmu armv7pmu = {
+ .handle_irq = armv7pmu_handle_irq,
+ .enable = armv7pmu_enable_event,
+ .disable = armv7pmu_disable_event,
+ .read_counter = armv7pmu_read_counter,
+ .write_counter = armv7pmu_write_counter,
+ .get_event_idx = armv7pmu_get_event_idx,
+ .start = armv7pmu_start,
+ .stop = armv7pmu_stop,
+ .raw_event_mask = 0xFF,
+ .max_period = (1LLU << 32) - 1,
+};
+
+static u32 __init armv7_reset_read_pmnc(void)
+{
+ u32 nb_cnt;
+
+ /* Initialize & Reset PMNC: C and P bits */
+ armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
+
+ /* Read the nb of CNTx counters supported from PMNC */
+ nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
+
+ /* Add the CPU cycles counter and return */
+ return nb_cnt + 1;
+}
+
+const struct arm_pmu *__init armv7_a8_pmu_init(void)
+{
+ armv7pmu.id = ARM_PERF_PMU_ID_CA8;
+ armv7pmu.name = "ARMv7 Cortex-A8";
+ armv7pmu.cache_map = &armv7_a8_perf_cache_map;
+ armv7pmu.event_map = &armv7_a8_perf_map;
+ armv7pmu.num_events = armv7_reset_read_pmnc();
+ return &armv7pmu;
+}
+
+const struct arm_pmu *__init armv7_a9_pmu_init(void)
+{
+ armv7pmu.id = ARM_PERF_PMU_ID_CA9;
+ armv7pmu.name = "ARMv7 Cortex-A9";
+ armv7pmu.cache_map = &armv7_a9_perf_cache_map;
+ armv7pmu.event_map = &armv7_a9_perf_map;
+ armv7pmu.num_events = armv7_reset_read_pmnc();
+ return &armv7pmu;
+}
+#else
+const struct arm_pmu *__init armv7_a8_pmu_init(void)
+{
+ return NULL;
+}
+
+const struct arm_pmu *__init armv7_a9_pmu_init(void)
+{
+ return NULL;
+}
+#endif /* CONFIG_CPU_V7 */
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
new file mode 100644
index 0000000..4e95927
--- /dev/null
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -0,0 +1,807 @@
+/*
+ * ARMv5 [xscale] Performance counter handling code.
+ *
+ * Copyright (C) 2010, ARM Ltd., Will Deacon <will.deacon@arm.com>
+ *
+ * Based on the previous xscale OProfile code.
+ *
+ * There are two variants of the xscale PMU that we support:
+ * - xscale1pmu: 2 event counters and a cycle counter
+ * - xscale2pmu: 4 event counters and a cycle counter
+ * The two variants share event definitions, but have different
+ * PMU structures.
+ */
+
+#ifdef CONFIG_CPU_XSCALE
+enum xscale_perf_types {
+ XSCALE_PERFCTR_ICACHE_MISS = 0x00,
+ XSCALE_PERFCTR_ICACHE_NO_DELIVER = 0x01,
+ XSCALE_PERFCTR_DATA_STALL = 0x02,
+ XSCALE_PERFCTR_ITLB_MISS = 0x03,
+ XSCALE_PERFCTR_DTLB_MISS = 0x04,
+ XSCALE_PERFCTR_BRANCH = 0x05,
+ XSCALE_PERFCTR_BRANCH_MISS = 0x06,
+ XSCALE_PERFCTR_INSTRUCTION = 0x07,
+ XSCALE_PERFCTR_DCACHE_FULL_STALL = 0x08,
+ XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG = 0x09,
+ XSCALE_PERFCTR_DCACHE_ACCESS = 0x0A,
+ XSCALE_PERFCTR_DCACHE_MISS = 0x0B,
+ XSCALE_PERFCTR_DCACHE_WRITE_BACK = 0x0C,
+ XSCALE_PERFCTR_PC_CHANGED = 0x0D,
+ XSCALE_PERFCTR_BCU_REQUEST = 0x10,
+ XSCALE_PERFCTR_BCU_FULL = 0x11,
+ XSCALE_PERFCTR_BCU_DRAIN = 0x12,
+ XSCALE_PERFCTR_BCU_ECC_NO_ELOG = 0x14,
+ XSCALE_PERFCTR_BCU_1_BIT_ERR = 0x15,
+ XSCALE_PERFCTR_RMW = 0x16,
+ /* XSCALE_PERFCTR_CCNT is not hardware defined */
+ XSCALE_PERFCTR_CCNT = 0xFE,
+ XSCALE_PERFCTR_UNUSED = 0xFF,
+};
+
+enum xscale_counters {
+ XSCALE_CYCLE_COUNTER = 1,
+ XSCALE_COUNTER0,
+ XSCALE_COUNTER1,
+ XSCALE_COUNTER2,
+ XSCALE_COUNTER3,
+};
+
+static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT,
+ [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH,
+ [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+#define XSCALE_PMU_ENABLE 0x001
+#define XSCALE_PMN_RESET 0x002
+#define XSCALE_CCNT_RESET 0x004
+#define XSCALE_PMU_RESET (CCNT_RESET | PMN_RESET)
+#define XSCALE_PMU_CNT64 0x008
+
+#define XSCALE1_OVERFLOWED_MASK 0x700
+#define XSCALE1_CCOUNT_OVERFLOW 0x400
+#define XSCALE1_COUNT0_OVERFLOW 0x100
+#define XSCALE1_COUNT1_OVERFLOW 0x200
+#define XSCALE1_CCOUNT_INT_EN 0x040
+#define XSCALE1_COUNT0_INT_EN 0x010
+#define XSCALE1_COUNT1_INT_EN 0x020
+#define XSCALE1_COUNT0_EVT_SHFT 12
+#define XSCALE1_COUNT0_EVT_MASK (0xff << XSCALE1_COUNT0_EVT_SHFT)
+#define XSCALE1_COUNT1_EVT_SHFT 20
+#define XSCALE1_COUNT1_EVT_MASK (0xff << XSCALE1_COUNT1_EVT_SHFT)
+
+static inline u32
+xscale1pmu_read_pmnc(void)
+{
+ u32 val;
+ asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
+ return val;
+}
+
+static inline void
+xscale1pmu_write_pmnc(u32 val)
+{
+ /* upper 4bits and 7, 11 are write-as-0 */
+ val &= 0xffff77f;
+ asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
+}
+
+static inline int
+xscale1_pmnc_counter_has_overflowed(unsigned long pmnc,
+ enum xscale_counters counter)
+{
+ int ret = 0;
+
+ switch (counter) {
+ case XSCALE_CYCLE_COUNTER:
+ ret = pmnc & XSCALE1_CCOUNT_OVERFLOW;
+ break;
+ case XSCALE_COUNTER0:
+ ret = pmnc & XSCALE1_COUNT0_OVERFLOW;
+ break;
+ case XSCALE_COUNTER1:
+ ret = pmnc & XSCALE1_COUNT1_OVERFLOW;
+ break;
+ default:
+ WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+ }
+
+ return ret;
+}
+
+static irqreturn_t
+xscale1pmu_handle_irq(int irq_num, void *dev)
+{
+ unsigned long pmnc;
+ struct perf_sample_data data;
+ struct cpu_hw_events *cpuc;
+ struct pt_regs *regs;
+ int idx;
+
+ /*
+ * NOTE: there's an A stepping erratum that states if an overflow
+ * bit already exists and another occurs, the previous
+ * Overflow bit gets cleared. There's no workaround.
+ * Fixed in B stepping or later.
+ */
+ pmnc = xscale1pmu_read_pmnc();
+
+ /*
+ * Write the value back to clear the overflow flags. Overflow
+ * flags remain in pmnc for use below. We also disable the PMU
+ * while we process the interrupt.
+ */
+ xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
+
+ if (!(pmnc & XSCALE1_OVERFLOWED_MASK))
+ return IRQ_NONE;
+
+ regs = get_irq_regs();
+
+ perf_sample_data_init(&data, 0);
+
+ cpuc = &__get_cpu_var(cpu_hw_events);
+ for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ struct perf_event *event = cpuc->events[idx];
+ struct hw_perf_event *hwc;
+
+ if (!test_bit(idx, cpuc->active_mask))
+ continue;
+
+ if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
+ continue;
+
+ hwc = &event->hw;
+ armpmu_event_update(event, hwc, idx);
+ data.period = event->hw.last_period;
+ if (!armpmu_event_set_period(event, hwc, idx))
+ continue;
+
+ if (perf_event_overflow(event, 0, &data, regs))
+ armpmu->disable(hwc, idx);
+ }
+
+ irq_work_run();
+
+ /*
+ * Re-enable the PMU.
+ */
+ pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE;
+ xscale1pmu_write_pmnc(pmnc);
+
+ return IRQ_HANDLED;
+}
+
+static void
+xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+ unsigned long val, mask, evt, flags;
+
+ switch (idx) {
+ case XSCALE_CYCLE_COUNTER:
+ mask = 0;
+ evt = XSCALE1_CCOUNT_INT_EN;
+ break;
+ case XSCALE_COUNTER0:
+ mask = XSCALE1_COUNT0_EVT_MASK;
+ evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) |
+ XSCALE1_COUNT0_INT_EN;
+ break;
+ case XSCALE_COUNTER1:
+ mask = XSCALE1_COUNT1_EVT_MASK;
+ evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) |
+ XSCALE1_COUNT1_INT_EN;
+ break;
+ default:
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = xscale1pmu_read_pmnc();
+ val &= ~mask;
+ val |= evt;
+ xscale1pmu_write_pmnc(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+ unsigned long val, mask, evt, flags;
+
+ switch (idx) {
+ case XSCALE_CYCLE_COUNTER:
+ mask = XSCALE1_CCOUNT_INT_EN;
+ evt = 0;
+ break;
+ case XSCALE_COUNTER0:
+ mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK;
+ evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT;
+ break;
+ case XSCALE_COUNTER1:
+ mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK;
+ evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT;
+ break;
+ default:
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = xscale1pmu_read_pmnc();
+ val &= ~mask;
+ val |= evt;
+ xscale1pmu_write_pmnc(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static int
+xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc,
+ struct hw_perf_event *event)
+{
+ if (XSCALE_PERFCTR_CCNT == event->config_base) {
+ if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask))
+ return -EAGAIN;
+
+ return XSCALE_CYCLE_COUNTER;
+ } else {
+ if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask))
+ return XSCALE_COUNTER1;
+
+ if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask))
+ return XSCALE_COUNTER0;
+
+ return -EAGAIN;
+ }
+}
+
+static void
+xscale1pmu_start(void)
+{
+ unsigned long flags, val;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = xscale1pmu_read_pmnc();
+ val |= XSCALE_PMU_ENABLE;
+ xscale1pmu_write_pmnc(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale1pmu_stop(void)
+{
+ unsigned long flags, val;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = xscale1pmu_read_pmnc();
+ val &= ~XSCALE_PMU_ENABLE;
+ xscale1pmu_write_pmnc(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static inline u32
+xscale1pmu_read_counter(int counter)
+{
+ u32 val = 0;
+
+ switch (counter) {
+ case XSCALE_CYCLE_COUNTER:
+ asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
+ break;
+ case XSCALE_COUNTER0:
+ asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
+ break;
+ case XSCALE_COUNTER1:
+ asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
+ break;
+ }
+
+ return val;
+}
+
+static inline void
+xscale1pmu_write_counter(int counter, u32 val)
+{
+ switch (counter) {
+ case XSCALE_CYCLE_COUNTER:
+ asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
+ break;
+ case XSCALE_COUNTER0:
+ asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
+ break;
+ case XSCALE_COUNTER1:
+ asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
+ break;
+ }
+}
+
+static const struct arm_pmu xscale1pmu = {
+ .id = ARM_PERF_PMU_ID_XSCALE1,
+ .name = "xscale1",
+ .handle_irq = xscale1pmu_handle_irq,
+ .enable = xscale1pmu_enable_event,
+ .disable = xscale1pmu_disable_event,
+ .read_counter = xscale1pmu_read_counter,
+ .write_counter = xscale1pmu_write_counter,
+ .get_event_idx = xscale1pmu_get_event_idx,
+ .start = xscale1pmu_start,
+ .stop = xscale1pmu_stop,
+ .cache_map = &xscale_perf_cache_map,
+ .event_map = &xscale_perf_map,
+ .raw_event_mask = 0xFF,
+ .num_events = 3,
+ .max_period = (1LLU << 32) - 1,
+};
+
+const struct arm_pmu *__init xscale1pmu_init(void)
+{
+ return &xscale1pmu;
+}
+
+#define XSCALE2_OVERFLOWED_MASK 0x01f
+#define XSCALE2_CCOUNT_OVERFLOW 0x001
+#define XSCALE2_COUNT0_OVERFLOW 0x002
+#define XSCALE2_COUNT1_OVERFLOW 0x004
+#define XSCALE2_COUNT2_OVERFLOW 0x008
+#define XSCALE2_COUNT3_OVERFLOW 0x010
+#define XSCALE2_CCOUNT_INT_EN 0x001
+#define XSCALE2_COUNT0_INT_EN 0x002
+#define XSCALE2_COUNT1_INT_EN 0x004
+#define XSCALE2_COUNT2_INT_EN 0x008
+#define XSCALE2_COUNT3_INT_EN 0x010
+#define XSCALE2_COUNT0_EVT_SHFT 0
+#define XSCALE2_COUNT0_EVT_MASK (0xff << XSCALE2_COUNT0_EVT_SHFT)
+#define XSCALE2_COUNT1_EVT_SHFT 8
+#define XSCALE2_COUNT1_EVT_MASK (0xff << XSCALE2_COUNT1_EVT_SHFT)
+#define XSCALE2_COUNT2_EVT_SHFT 16
+#define XSCALE2_COUNT2_EVT_MASK (0xff << XSCALE2_COUNT2_EVT_SHFT)
+#define XSCALE2_COUNT3_EVT_SHFT 24
+#define XSCALE2_COUNT3_EVT_MASK (0xff << XSCALE2_COUNT3_EVT_SHFT)
+
+static inline u32
+xscale2pmu_read_pmnc(void)
+{
+ u32 val;
+ asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
+ /* bits 1-2 and 4-23 are read-unpredictable */
+ return val & 0xff000009;
+}
+
+static inline void
+xscale2pmu_write_pmnc(u32 val)
+{
+ /* bits 4-23 are write-as-0, 24-31 are write ignored */
+ val &= 0xf;
+ asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
+}
+
+static inline u32
+xscale2pmu_read_overflow_flags(void)
+{
+ u32 val;
+ asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val));
+ return val;
+}
+
+static inline void
+xscale2pmu_write_overflow_flags(u32 val)
+{
+ asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val));
+}
+
+static inline u32
+xscale2pmu_read_event_select(void)
+{
+ u32 val;
+ asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val));
+ return val;
+}
+
+static inline void
+xscale2pmu_write_event_select(u32 val)
+{
+ asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val));
+}
+
+static inline u32
+xscale2pmu_read_int_enable(void)
+{
+ u32 val;
+ asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val));
+ return val;
+}
+
+static void
+xscale2pmu_write_int_enable(u32 val)
+{
+ asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val));
+}
+
+static inline int
+xscale2_pmnc_counter_has_overflowed(unsigned long of_flags,
+ enum xscale_counters counter)
+{
+ int ret = 0;
+
+ switch (counter) {
+ case XSCALE_CYCLE_COUNTER:
+ ret = of_flags & XSCALE2_CCOUNT_OVERFLOW;
+ break;
+ case XSCALE_COUNTER0:
+ ret = of_flags & XSCALE2_COUNT0_OVERFLOW;
+ break;
+ case XSCALE_COUNTER1:
+ ret = of_flags & XSCALE2_COUNT1_OVERFLOW;
+ break;
+ case XSCALE_COUNTER2:
+ ret = of_flags & XSCALE2_COUNT2_OVERFLOW;
+ break;
+ case XSCALE_COUNTER3:
+ ret = of_flags & XSCALE2_COUNT3_OVERFLOW;
+ break;
+ default:
+ WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+ }
+
+ return ret;
+}
+
+static irqreturn_t
+xscale2pmu_handle_irq(int irq_num, void *dev)
+{
+ unsigned long pmnc, of_flags;
+ struct perf_sample_data data;
+ struct cpu_hw_events *cpuc;
+ struct pt_regs *regs;
+ int idx;
+
+ /* Disable the PMU. */
+ pmnc = xscale2pmu_read_pmnc();
+ xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
+
+ /* Check the overflow flag register. */
+ of_flags = xscale2pmu_read_overflow_flags();
+ if (!(of_flags & XSCALE2_OVERFLOWED_MASK))
+ return IRQ_NONE;
+
+ /* Clear the overflow bits. */
+ xscale2pmu_write_overflow_flags(of_flags);
+
+ regs = get_irq_regs();
+
+ perf_sample_data_init(&data, 0);
+
+ cpuc = &__get_cpu_var(cpu_hw_events);
+ for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ struct perf_event *event = cpuc->events[idx];
+ struct hw_perf_event *hwc;
+
+ if (!test_bit(idx, cpuc->active_mask))
+ continue;
+
+ if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
+ continue;
+
+ hwc = &event->hw;
+ armpmu_event_update(event, hwc, idx);
+ data.period = event->hw.last_period;
+ if (!armpmu_event_set_period(event, hwc, idx))
+ continue;
+
+ if (perf_event_overflow(event, 0, &data, regs))
+ armpmu->disable(hwc, idx);
+ }
+
+ irq_work_run();
+
+ /*
+ * Re-enable the PMU.
+ */
+ pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE;
+ xscale2pmu_write_pmnc(pmnc);
+
+ return IRQ_HANDLED;
+}
+
+static void
+xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+ unsigned long flags, ien, evtsel;
+
+ ien = xscale2pmu_read_int_enable();
+ evtsel = xscale2pmu_read_event_select();
+
+ switch (idx) {
+ case XSCALE_CYCLE_COUNTER:
+ ien |= XSCALE2_CCOUNT_INT_EN;
+ break;
+ case XSCALE_COUNTER0:
+ ien |= XSCALE2_COUNT0_INT_EN;
+ evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
+ evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT;
+ break;
+ case XSCALE_COUNTER1:
+ ien |= XSCALE2_COUNT1_INT_EN;
+ evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
+ evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT;
+ break;
+ case XSCALE_COUNTER2:
+ ien |= XSCALE2_COUNT2_INT_EN;
+ evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
+ evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT;
+ break;
+ case XSCALE_COUNTER3:
+ ien |= XSCALE2_COUNT3_INT_EN;
+ evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
+ evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT;
+ break;
+ default:
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ xscale2pmu_write_event_select(evtsel);
+ xscale2pmu_write_int_enable(ien);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+ unsigned long flags, ien, evtsel;
+
+ ien = xscale2pmu_read_int_enable();
+ evtsel = xscale2pmu_read_event_select();
+
+ switch (idx) {
+ case XSCALE_CYCLE_COUNTER:
+ ien &= ~XSCALE2_CCOUNT_INT_EN;
+ break;
+ case XSCALE_COUNTER0:
+ ien &= ~XSCALE2_COUNT0_INT_EN;
+ evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
+ evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
+ break;
+ case XSCALE_COUNTER1:
+ ien &= ~XSCALE2_COUNT1_INT_EN;
+ evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
+ evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
+ break;
+ case XSCALE_COUNTER2:
+ ien &= ~XSCALE2_COUNT2_INT_EN;
+ evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
+ evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
+ break;
+ case XSCALE_COUNTER3:
+ ien &= ~XSCALE2_COUNT3_INT_EN;
+ evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
+ evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
+ break;
+ default:
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ xscale2pmu_write_event_select(evtsel);
+ xscale2pmu_write_int_enable(ien);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static int
+xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc,
+ struct hw_perf_event *event)
+{
+ int idx = xscale1pmu_get_event_idx(cpuc, event);
+ if (idx >= 0)
+ goto out;
+
+ if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask))
+ idx = XSCALE_COUNTER3;
+ else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask))
+ idx = XSCALE_COUNTER2;
+out:
+ return idx;
+}
+
+static void
+xscale2pmu_start(void)
+{
+ unsigned long flags, val;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
+ val |= XSCALE_PMU_ENABLE;
+ xscale2pmu_write_pmnc(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale2pmu_stop(void)
+{
+ unsigned long flags, val;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ val = xscale2pmu_read_pmnc();
+ val &= ~XSCALE_PMU_ENABLE;
+ xscale2pmu_write_pmnc(val);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static inline u32
+xscale2pmu_read_counter(int counter)
+{
+ u32 val = 0;
+
+ switch (counter) {
+ case XSCALE_CYCLE_COUNTER:
+ asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
+ break;
+ case XSCALE_COUNTER0:
+ asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
+ break;
+ case XSCALE_COUNTER1:
+ asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
+ break;
+ case XSCALE_COUNTER2:
+ asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
+ break;
+ case XSCALE_COUNTER3:
+ asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
+ break;
+ }
+
+ return val;
+}
+
+static inline void
+xscale2pmu_write_counter(int counter, u32 val)
+{
+ switch (counter) {
+ case XSCALE_CYCLE_COUNTER:
+ asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
+ break;
+ case XSCALE_COUNTER0:
+ asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
+ break;
+ case XSCALE_COUNTER1:
+ asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
+ break;
+ case XSCALE_COUNTER2:
+ asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
+ break;
+ case XSCALE_COUNTER3:
+ asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
+ break;
+ }
+}
+
+static const struct arm_pmu xscale2pmu = {
+ .id = ARM_PERF_PMU_ID_XSCALE2,
+ .name = "xscale2",
+ .handle_irq = xscale2pmu_handle_irq,
+ .enable = xscale2pmu_enable_event,
+ .disable = xscale2pmu_disable_event,
+ .read_counter = xscale2pmu_read_counter,
+ .write_counter = xscale2pmu_write_counter,
+ .get_event_idx = xscale2pmu_get_event_idx,
+ .start = xscale2pmu_start,
+ .stop = xscale2pmu_stop,
+ .cache_map = &xscale_perf_cache_map,
+ .event_map = &xscale_perf_map,
+ .raw_event_mask = 0xFF,
+ .num_events = 5,
+ .max_period = (1LLU << 32) - 1,
+};
+
+const struct arm_pmu *__init xscale2pmu_init(void)
+{
+ return &xscale2pmu;
+}
+#else
+const struct arm_pmu *__init xscale1pmu_init(void)
+{
+ return NULL;
+}
+
+const struct arm_pmu *__init xscale2pmu_init(void)
+{
+ return NULL;
+}
+#endif /* CONFIG_CPU_XSCALE */
diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c
new file mode 100644
index 0000000..2cdcc92
--- /dev/null
+++ b/arch/arm/kernel/sched_clock.c
@@ -0,0 +1,69 @@
+/*
+ * sched_clock.c: support for extending counters to full 64-bit ns counter
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+
+#include <asm/sched_clock.h>
+
+static void sched_clock_poll(unsigned long wrap_ticks);
+static DEFINE_TIMER(sched_clock_timer, sched_clock_poll, 0, 0);
+static void (*sched_clock_update_fn)(void);
+
+static void sched_clock_poll(unsigned long wrap_ticks)
+{
+ mod_timer(&sched_clock_timer, round_jiffies(jiffies + wrap_ticks));
+ sched_clock_update_fn();
+}
+
+void __init init_sched_clock(struct clock_data *cd, void (*update)(void),
+ unsigned int clock_bits, unsigned long rate)
+{
+ unsigned long r, w;
+ u64 res, wrap;
+ char r_unit;
+
+ sched_clock_update_fn = update;
+
+ /* calculate the mult/shift to convert counter ticks to ns. */
+ clocks_calc_mult_shift(&cd->mult, &cd->shift, rate, NSEC_PER_SEC, 60);
+
+ r = rate;
+ if (r >= 4000000) {
+ r /= 1000000;
+ r_unit = 'M';
+ } else {
+ r /= 1000;
+ r_unit = 'k';
+ }
+
+ /* calculate how many ns until we wrap */
+ wrap = cyc_to_ns((1ULL << clock_bits) - 1, cd->mult, cd->shift);
+ do_div(wrap, NSEC_PER_MSEC);
+ w = wrap;
+
+ /* calculate the ns resolution of this counter */
+ res = cyc_to_ns(1ULL, cd->mult, cd->shift);
+ pr_info("sched_clock: %u bits at %lu%cHz, resolution %lluns, wraps every %lums\n",
+ clock_bits, r, r_unit, res, w);
+
+ /*
+ * Start the timer to keep sched_clock() properly updated and
+ * sets the initial epoch.
+ */
+ sched_clock_timer.data = msecs_to_jiffies(w - (w / 10));
+ sched_clock_poll(sched_clock_timer.data);
+
+ /*
+ * Ensure that sched_clock() starts off at 0ns
+ */
+ cd->epoch_ns = 0;
+}
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 9066473..b6b78b2 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -16,6 +16,7 @@
#include <linux/cache.h>
#include <linux/profile.h>
#include <linux/errno.h>
+#include <linux/ftrace.h>
#include <linux/mm.h>
#include <linux/err.h>
#include <linux/cpu.h>
@@ -456,7 +457,7 @@
}
#ifdef CONFIG_LOCAL_TIMERS
-asmlinkage void __exception do_local_timer(struct pt_regs *regs)
+asmlinkage void __exception_irq_entry do_local_timer(struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
int cpu = smp_processor_id();
@@ -543,7 +544,7 @@
*
* Bit 0 - Inter-processor function call
*/
-asmlinkage void __exception do_IPI(struct pt_regs *regs)
+asmlinkage void __exception_irq_entry do_IPI(struct pt_regs *regs)
{
unsigned int cpu = smp_processor_id();
struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index cead889..897c1a8 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -101,6 +101,7 @@
__exception_text_start = .;
*(.exception.text)
__exception_text_end = .;
+ IRQENTRY_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 2500f41..1dd69c8 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -101,7 +101,6 @@
.rating = 150,
.read = read_clk32k,
.mask = CLOCKSOURCE_MASK(20),
- .shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -201,8 +200,7 @@
clockevents_register_device(&clkevt);
/* register clocksource */
- clk32k.mult = clocksource_hz2mult(AT91_SLOW_CLOCK, clk32k.shift);
- clocksource_register(&clk32k);
+ clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
}
struct sys_timer at91rm9200_timer = {
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 608a632..4ba8549 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -51,7 +51,6 @@
.name = "pit",
.rating = 175,
.read = read_pit_clk,
- .shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -163,10 +162,9 @@
* Register clocksource. The high order bits of PIV are unused,
* so this isn't a 32-bit counter unless we get clockevent irqs.
*/
- pit_clk.mult = clocksource_hz2mult(pit_rate, pit_clk.shift);
bits = 12 /* PICNT */ + ilog2(pit_cycle) /* PIV */;
pit_clk.mask = CLOCKSOURCE_MASK(bits);
- clocksource_register(&pit_clk);
+ clocksource_register_hz(&pit_clk, pit_rate);
/* Set up irq handler */
setup_irq(AT91_ID_SYS, &at91sam926x_pit_irq);
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index d3f959e..b91b1b0 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -294,7 +294,6 @@
.rating = 200,
.read = bcmring_get_cycles_timer1,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -303,7 +302,6 @@
.rating = 100,
.read = bcmring_get_cycles_timer3,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -316,10 +314,8 @@
writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
TIMER1_VA_BASE + TIMER_CTRL);
- clocksource_bcmring_timer1.mult =
- clocksource_khz2mult(TIMER1_FREQUENCY_MHZ * 1000,
- clocksource_bcmring_timer1.shift);
- clocksource_register(&clocksource_bcmring_timer1);
+ clocksource_register_khz(&clocksource_bcmring_timer1,
+ TIMER1_FREQUENCY_MHZ * 1000);
/* setup timer3 as free-running clocksource */
writel(0, TIMER3_VA_BASE + TIMER_CTRL);
@@ -328,10 +324,8 @@
writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
TIMER3_VA_BASE + TIMER_CTRL);
- clocksource_bcmring_timer3.mult =
- clocksource_khz2mult(TIMER3_FREQUENCY_KHZ,
- clocksource_bcmring_timer3.shift);
- clocksource_register(&clocksource_bcmring_timer3);
+ clocksource_register_khz(&clocksource_bcmring_timer3,
+ TIMER3_FREQUENCY_KHZ);
return 0;
}
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 0f21c36..c148671 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -276,7 +276,6 @@
.rating = 300,
.read = read_cycles,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 24,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -378,10 +377,8 @@
/* setup clocksource */
clocksource_davinci.name = id_to_name[clocksource_id];
- clocksource_davinci.mult =
- clocksource_khz2mult(davinci_clock_tick_rate/1000,
- clocksource_davinci.shift);
- if (clocksource_register(&clocksource_davinci))
+ if (clocksource_register_hz(&clocksource_davinci,
+ davinci_clock_tick_rate))
printk(err, clocksource_davinci.name);
/* setup clockevent */
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 548208f..2774df8 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -372,7 +372,6 @@
.rating = 200,
.read = timersp_read,
.mask = CLOCKSOURCE_MASK(16),
- .shift = 16,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -390,8 +389,7 @@
writel(ctrl, base + TIMER_CTRL);
writel(0xffff, base + TIMER_LOAD);
- cs->mult = clocksource_khz2mult(khz, cs->shift);
- clocksource_register(cs);
+ clocksource_register_khz(cs, khz);
}
static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE;
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 0bce097..4dbfcbb 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -35,6 +35,7 @@
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/irq.h>
+#include <asm/sched_clock.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
@@ -399,6 +400,23 @@
}
/*
+ * sched_clock()
+ */
+static DEFINE_CLOCK_DATA(cd);
+
+unsigned long long notrace sched_clock(void)
+{
+ u32 cyc = *IXP4XX_OSTS;
+ return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace ixp4xx_update_sched_clock(void)
+{
+ u32 cyc = *IXP4XX_OSTS;
+ update_sched_clock(&cd, cyc, (u32)~0);
+}
+
+/*
* clocksource
*/
static cycle_t ixp4xx_get_cycles(struct clocksource *cs)
@@ -411,7 +429,6 @@
.rating = 200,
.read = ixp4xx_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -419,21 +436,9 @@
EXPORT_SYMBOL(ixp4xx_timer_freq);
static void __init ixp4xx_clocksource_init(void)
{
- clocksource_ixp4xx.mult =
- clocksource_hz2mult(ixp4xx_timer_freq,
- clocksource_ixp4xx.shift);
- clocksource_register(&clocksource_ixp4xx);
-}
+ init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq);
-/*
- * sched_clock()
- */
-unsigned long long sched_clock(void)
-{
- cycle_t cyc = ixp4xx_get_cycles(NULL);
- struct clocksource *cs = &clocksource_ixp4xx;
-
- return clocksource_cyc2ns(cyc, cs->mult, cs->shift);
+ clocksource_register_hz(&clocksource_ixp4xx, ixp4xx_timer_freq);
}
/*
diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c
index 630dd4a..6162ac3 100644
--- a/arch/arm/mach-lpc32xx/timer.c
+++ b/arch/arm/mach-lpc32xx/timer.c
@@ -38,7 +38,6 @@
static struct clocksource lpc32xx_clksrc = {
.name = "lpc32xx_clksrc",
- .shift = 24,
.rating = 300,
.read = lpc32xx_clksrc_read,
.mask = CLOCKSOURCE_MASK(32),
@@ -171,9 +170,7 @@
__raw_writel(0, LCP32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
__raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
- lpc32xx_clksrc.mult = clocksource_hz2mult(clkrate,
- lpc32xx_clksrc.shift);
- clocksource_register(&lpc32xx_clksrc);
+ clocksource_register_hz(&lpc32xx_clksrc, clkrate);
}
struct sys_timer lpc32xx_timer = {
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 6652819..aeb9ae2 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -26,8 +26,8 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/sched.h>
-#include <linux/cnt32_to_63.h>
+#include <asm/sched_clock.h>
#include <mach/addr-map.h>
#include <mach/regs-timers.h>
#include <mach/regs-apbc.h>
@@ -42,23 +42,7 @@
#define MAX_DELTA (0xfffffffe)
#define MIN_DELTA (16)
-#define TCR2NS_SCALE_FACTOR 10
-
-static unsigned long tcr2ns_scale;
-
-static void __init set_tcr2ns_scale(unsigned long tcr_rate)
-{
- unsigned long long v = 1000000000ULL << TCR2NS_SCALE_FACTOR;
- do_div(v, tcr_rate);
- tcr2ns_scale = v;
- /*
- * We want an even value to automatically clear the top bit
- * returned by cnt32_to_63() without an additional run time
- * instruction. So if the LSB is 1 then round it up.
- */
- if (tcr2ns_scale & 1)
- tcr2ns_scale++;
-}
+static DEFINE_CLOCK_DATA(cd);
/*
* FIXME: the timer needs some delay to stablize the counter capture
@@ -75,10 +59,16 @@
return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0));
}
-unsigned long long sched_clock(void)
+unsigned long long notrace sched_clock(void)
{
- unsigned long long v = cnt32_to_63(timer_read());
- return (v * tcr2ns_scale) >> TCR2NS_SCALE_FACTOR;
+ u32 cyc = timer_read();
+ return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace mmp_update_sched_clock(void)
+{
+ u32 cyc = timer_read();
+ update_sched_clock(&cd, cyc, (u32)~0);
}
static irqreturn_t timer_interrupt(int irq, void *dev_id)
@@ -146,7 +136,6 @@
static struct clocksource cksrc = {
.name = "clocksource",
- .shift = 20,
.rating = 200,
.read = clksrc_read,
.mask = CLOCKSOURCE_MASK(32),
@@ -186,17 +175,15 @@
{
timer_config();
- set_tcr2ns_scale(CLOCK_TICK_RATE);
+ init_sched_clock(&cd, mmp_update_sched_clock, 32, CLOCK_TICK_RATE);
ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift);
ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt);
ckevt.min_delta_ns = clockevent_delta2ns(MIN_DELTA, &ckevt);
ckevt.cpumask = cpumask_of(0);
- cksrc.mult = clocksource_hz2mult(CLOCK_TICK_RATE, cksrc.shift);
-
setup_irq(irq, &timer_irq);
- clocksource_register(&cksrc);
+ clocksource_register_hz(&cksrc, CLOCK_TICK_RATE);
clockevents_register_device(&ckevt);
}
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index dbbcfeb..31e5fd6 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -49,6 +49,8 @@
config MSM_SOC_REV_A
bool
+config ARCH_MSM_SCORPIONMP
+ bool
config ARCH_MSM_ARM11
bool
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 950100f..595be7f 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -137,7 +137,6 @@
.rating = 200,
.read = msm_gpt_read,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 17,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
},
.irq = {
@@ -164,7 +163,6 @@
.rating = 300,
.read = msm_dgt_read,
.mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)),
- .shift = 24 - MSM_DGT_SHIFT,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
},
.irq = {
@@ -205,8 +203,7 @@
ce->min_delta_ns = clockevent_delta2ns(4, ce);
ce->cpumask = cpumask_of(0);
- cs->mult = clocksource_hz2mult(clock->freq, cs->shift);
- res = clocksource_register(cs);
+ res = clocksource_register_hz(cs, clock->freq);
if (res)
printk(KERN_ERR "msm_timer_init: clocksource_register "
"failed for %s\n", cs->name);
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index 82801db..f12f22d 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -114,7 +114,6 @@
.rating = 200,
.read = netx_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -151,9 +150,7 @@
writel(NETX_GPIO_COUNTER_CTRL_RUN,
NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
- clocksource_netx.mult =
- clocksource_hz2mult(CLOCK_TICK_RATE, clocksource_netx.shift);
- clocksource_register(&clocksource_netx);
+ clocksource_register_hz(&clocksource_netx, CLOCK_TICK_RATE);
netx_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
netx_clockevent.shift);
diff --git a/arch/arm/mach-ns9xxx/time-ns9360.c b/arch/arm/mach-ns9xxx/time-ns9360.c
index 7728126..9ca32f5 100644
--- a/arch/arm/mach-ns9xxx/time-ns9360.c
+++ b/arch/arm/mach-ns9xxx/time-ns9360.c
@@ -35,7 +35,6 @@
.rating = 300,
.read = ns9360_clocksource_read,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -148,10 +147,7 @@
__raw_writel(tc, SYS_TC(TIMER_CLOCKSOURCE));
- ns9360_clocksource.mult = clocksource_hz2mult(ns9360_cpuclock(),
- ns9360_clocksource.shift);
-
- clocksource_register(&ns9360_clocksource);
+ clocksource_register_hz(&ns9360_clocksource, ns9360_cpuclock());
latch = SH_DIV(ns9360_cpuclock(), HZ, 0);
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 1be6a21..abb34ff 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -208,7 +208,6 @@
.rating = 300,
.read = mpu_read,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 24,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -217,13 +216,10 @@
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
- clocksource_mpu.mult
- = clocksource_khz2mult(rate/1000, clocksource_mpu.shift);
-
setup_irq(INT_TIMER2, &omap_mpu_timer2_irq);
omap_mpu_timer_start(1, ~0, 1);
- if (clocksource_register(&clocksource_mpu))
+ if (clocksource_register_hz(&clocksource_mpu, rate))
printk(err, clocksource_mpu.name);
}
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index e13c29e..a7816db 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -195,7 +195,6 @@
.rating = 300,
.read = clocksource_read_cycles,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 24,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -220,9 +219,7 @@
omap_dm_timer_set_load_start(gpt, 1, 0);
- clocksource_gpt.mult =
- clocksource_khz2mult(tick_rate/1000, clocksource_gpt.shift);
- if (clocksource_register(&clocksource_gpt))
+ if (clocksource_register_hz(&clocksource_gpt, tick_rate))
printk(err2, clocksource_gpt.name);
}
#endif
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 293e40a..e7f64d9 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -17,11 +17,11 @@
#include <linux/interrupt.h>
#include <linux/clockchips.h>
#include <linux/sched.h>
-#include <linux/cnt32_to_63.h>
#include <asm/div64.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
+#include <asm/sched_clock.h>
#include <mach/regs-ost.h>
/*
@@ -32,29 +32,18 @@
* long as there is always less than 582 seconds between successive
* calls to sched_clock() which should always be the case in practice.
*/
+static DEFINE_CLOCK_DATA(cd);
-#define OSCR2NS_SCALE_FACTOR 10
-
-static unsigned long oscr2ns_scale;
-
-static void __init set_oscr2ns_scale(unsigned long oscr_rate)
+unsigned long long notrace sched_clock(void)
{
- unsigned long long v = 1000000000ULL << OSCR2NS_SCALE_FACTOR;
- do_div(v, oscr_rate);
- oscr2ns_scale = v;
- /*
- * We want an even value to automatically clear the top bit
- * returned by cnt32_to_63() without an additional run time
- * instruction. So if the LSB is 1 then round it up.
- */
- if (oscr2ns_scale & 1)
- oscr2ns_scale++;
+ u32 cyc = OSCR;
+ return cyc_to_sched_clock(&cd, cyc, (u32)~0);
}
-unsigned long long sched_clock(void)
+static void notrace pxa_update_sched_clock(void)
{
- unsigned long long v = cnt32_to_63(OSCR);
- return (v * oscr2ns_scale) >> OSCR2NS_SCALE_FACTOR;
+ u32 cyc = OSCR;
+ update_sched_clock(&cd, cyc, (u32)~0);
}
@@ -127,7 +116,6 @@
.rating = 200,
.read = pxa_read_oscr,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -145,7 +133,7 @@
OIER = 0;
OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
- set_oscr2ns_scale(clock_tick_rate);
+ init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate);
ckevt_pxa_osmr0.mult =
div_sc(clock_tick_rate, NSEC_PER_SEC, ckevt_pxa_osmr0.shift);
@@ -155,12 +143,9 @@
clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_pxa_osmr0) + 1;
ckevt_pxa_osmr0.cpumask = cpumask_of(0);
- cksrc_pxa_oscr0.mult =
- clocksource_hz2mult(clock_tick_rate, cksrc_pxa_oscr0.shift);
-
setup_irq(IRQ_OST0, &pxa_ost0_irq);
- clocksource_register(&cksrc_pxa_oscr0);
+ clocksource_register_hz(&cksrc_pxa_oscr0, clock_tick_rate);
clockevents_register_device(&ckevt_pxa_osmr0);
}
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 14fbe50..aad806c 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -52,6 +52,8 @@
#include <mach/irqs.h>
#include <asm/hardware/timer-sp.h>
+#include <plat/sched_clock.h>
+
#include "core.h"
#ifdef CONFIG_ZONE_DMA
@@ -655,6 +657,12 @@
#endif /* CONFIG_LEDS */
/*
+ * The sched_clock counter
+ */
+#define REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + \
+ REALVIEW_SYS_24MHz_OFFSET)
+
+/*
* Where is the timer (VA)?
*/
void __iomem *timer0_va_base;
@@ -669,6 +677,8 @@
{
u32 val;
+ versatile_sched_clock_init(REFCOUNTER, 24000000);
+
/*
* set clock frequency:
* REALVIEW_REFCLK is 32KHz
diff --git a/arch/arm/mach-s5pv310/time.c b/arch/arm/mach-s5pv310/time.c
index 01b012a..b262d46 100644
--- a/arch/arm/mach-s5pv310/time.c
+++ b/arch/arm/mach-s5pv310/time.c
@@ -211,7 +211,6 @@
.rating = 250,
.read = s5pv310_pwm4_read,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS ,
};
@@ -230,10 +229,7 @@
s5pv310_pwm_init(4, ~0);
s5pv310_pwm_start(4, 1);
- pwm_clocksource.mult =
- clocksource_khz2mult(clock_rate/1000, pwm_clocksource.shift);
-
- if (clocksource_register(&pwm_clocksource))
+ if (clocksource_register_hz(&pwm_clocksource, clock_rate))
panic("%s: can't register clocksource\n", pwm_clocksource.name);
}
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 3555d61..59d14f0 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -16,9 +16,7 @@
#include <linux/pm.h>
#include <linux/cpufreq.h>
#include <linux/ioport.h>
-#include <linux/sched.h> /* just for sched_clock() - funny that */
#include <linux/platform_device.h>
-#include <linux/cnt32_to_63.h>
#include <asm/div64.h>
#include <mach/hardware.h>
@@ -110,27 +108,6 @@
}
/*
- * This is the SA11x0 sched_clock implementation. This has
- * a resolution of 271ns, and a maximum value of 32025597s (370 days).
- *
- * The return value is guaranteed to be monotonic in that range as
- * long as there is always less than 582 seconds between successive
- * calls to this function.
- *
- * ( * 1E9 / 3686400 => * 78125 / 288)
- */
-unsigned long long sched_clock(void)
-{
- unsigned long long v = cnt32_to_63(OSCR);
-
- /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */
- v *= 78125<<1;
- do_div(v, 288<<1);
-
- return v;
-}
-
-/*
* Default power-off for SA1100
*/
static void sa1100_power_off(void)
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 74b6e0e..ae4f3d8 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -12,12 +12,39 @@
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/sched.h> /* just for sched_clock() - funny that */
#include <linux/timex.h>
#include <linux/clockchips.h>
#include <asm/mach/time.h>
+#include <asm/sched_clock.h>
#include <mach/hardware.h>
+/*
+ * This is the SA11x0 sched_clock implementation.
+ */
+static DEFINE_CLOCK_DATA(cd);
+
+/*
+ * Constants generated by clocks_calc_mult_shift(m, s, 3.6864MHz,
+ * NSEC_PER_SEC, 60).
+ * This gives a resolution of about 271ns and a wrap period of about 19min.
+ */
+#define SC_MULT 2275555556u
+#define SC_SHIFT 23
+
+unsigned long long notrace sched_clock(void)
+{
+ u32 cyc = OSCR;
+ return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
+}
+
+static void notrace sa1100_update_sched_clock(void)
+{
+ u32 cyc = OSCR;
+ update_sched_clock(&cd, cyc, (u32)~0);
+}
+
#define MIN_OSCR_DELTA 2
static irqreturn_t sa1100_ost0_interrupt(int irq, void *dev_id)
@@ -81,7 +108,6 @@
.rating = 200,
.read = sa1100_read_oscr,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -97,6 +123,9 @@
OIER = 0; /* disable any timer interrupts */
OSSR = 0xf; /* clear status on all timers */
+ init_fixed_sched_clock(&cd, sa1100_update_sched_clock, 32,
+ 3686400, SC_MULT, SC_SHIFT);
+
ckevt_sa1100_osmr0.mult =
div_sc(3686400, NSEC_PER_SEC, ckevt_sa1100_osmr0.shift);
ckevt_sa1100_osmr0.max_delta_ns =
@@ -105,12 +134,9 @@
clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_sa1100_osmr0) + 1;
ckevt_sa1100_osmr0.cpumask = cpumask_of(0);
- cksrc_sa1100_oscr.mult =
- clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_sa1100_oscr.shift);
-
setup_irq(IRQ_OST0, &sa1100_timer_irq);
- clocksource_register(&cksrc_sa1100_oscr);
+ clocksource_register_hz(&cksrc_sa1100_oscr, CLOCK_TICK_RATE);
clockevents_register_device(&ckevt_sa1100_osmr0);
}
diff --git a/arch/arm/mach-tcc8k/time.c b/arch/arm/mach-tcc8k/time.c
index 78d0600..e0a8d60 100644
--- a/arch/arm/mach-tcc8k/time.c
+++ b/arch/arm/mach-tcc8k/time.c
@@ -35,7 +35,6 @@
.rating = 200,
.read = tcc_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 28,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -103,9 +102,7 @@
{
unsigned int c = clk_get_rate(clock);
- clocksource_tcc.mult = clocksource_hz2mult(c,
- clocksource_tcc.shift);
- clocksource_register(&clocksource_tcc);
+ clocksource_register_hz(&clocksource_tcc, c);
clockevent_tcc.mult = div_sc(c, NSEC_PER_SEC,
clockevent_tcc.shift);
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index 9057d6f..7b8ad1f 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -18,6 +18,7 @@
*/
#include <linux/init.h>
+#include <linux/sched.h>
#include <linux/time.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
@@ -25,10 +26,10 @@
#include <linux/clocksource.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <linux/cnt32_to_63.h>
#include <asm/mach/time.h>
#include <asm/localtimer.h>
+#include <asm/sched_clock.h>
#include <mach/iomap.h>
#include <mach/irqs.h>
@@ -91,7 +92,7 @@
static cycle_t tegra_clocksource_read(struct clocksource *cs)
{
- return cnt32_to_63(timer_readl(TIMERUS_CNTR_1US));
+ return timer_readl(TIMERUS_CNTR_1US);
}
static struct clock_event_device tegra_clockevent = {
@@ -106,14 +107,29 @@
.name = "timer_us",
.rating = 300,
.read = tegra_clocksource_read,
- .mask = 0x7FFFFFFFFFFFFFFFULL,
+ .mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-unsigned long long sched_clock(void)
+static DEFINE_CLOCK_DATA(cd);
+
+/*
+ * Constants generated by clocks_calc_mult_shift(m, s, 1MHz, NSEC_PER_SEC, 60).
+ * This gives a resolution of about 1us and a wrap period of about 1h11min.
+ */
+#define SC_MULT 4194304000u
+#define SC_SHIFT 22
+
+unsigned long long notrace sched_clock(void)
{
- return clocksource_cyc2ns(tegra_clocksource.read(&tegra_clocksource),
- tegra_clocksource.mult, tegra_clocksource.shift);
+ u32 cyc = timer_readl(TIMERUS_CNTR_1US);
+ return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
+}
+
+static void notrace tegra_update_sched_clock(void)
+{
+ u32 cyc = timer_readl(TIMERUS_CNTR_1US);
+ update_sched_clock(&cd, cyc, (u32)~0);
}
static irqreturn_t tegra_timer_interrupt(int irq, void *dev_id)
@@ -158,6 +174,9 @@
WARN(1, "Unknown clock rate");
}
+ init_fixed_sched_clock(&cd, tegra_update_sched_clock, 32,
+ 1000000, SC_MULT, SC_SHIFT);
+
if (clocksource_register_hz(&tegra_clocksource, 1000000)) {
printk(KERN_ERR "Failed to register clocksource\n");
BUG();
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 3fc4472..3ec58bd 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -9,6 +9,7 @@
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
#include <linux/interrupt.h>
+#include <linux/sched.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/clockchips.h>
@@ -21,6 +22,7 @@
#include <mach/hardware.h>
/* Generic stuff */
+#include <asm/sched_clock.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
@@ -352,12 +354,18 @@
* this wraps around for now, since it is just a relative time
* stamp. (Inspired by OMAP implementation.)
*/
+static DEFINE_CLOCK_DATA(cd);
+
unsigned long long notrace sched_clock(void)
{
- return clocksource_cyc2ns(clocksource_u300_1mhz.read(
- &clocksource_u300_1mhz),
- clocksource_u300_1mhz.mult,
- clocksource_u300_1mhz.shift);
+ u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
+ return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace u300_update_sched_clock(void)
+{
+ u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
+ update_sched_clock(&cd, cyc, (u32)~0);
}
@@ -375,6 +383,8 @@
clk_enable(clk);
rate = clk_get_rate(clk);
+ init_sched_clock(&cd, u300_update_sched_clock, 32, rate);
+
/*
* Disable the "OS" and "DD" timers - these are designed for Symbian!
* Example usage in cnh1601578 cpu subsystem pd_timer_app.c
@@ -412,9 +422,7 @@
writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2);
- clocksource_calc_mult_shift(&clocksource_u300_1mhz,
- rate, APPTIMER_MIN_RANGE);
- if (clocksource_register(&clocksource_u300_1mhz))
+ if (clocksource_register_hz(&clocksource_u300_1mhz, rate))
printk(KERN_ERR "timer: failed to initialize clock "
"source %s\n", clocksource_u300_1mhz.name);
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 6b93bd6..40a024c 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -51,6 +51,8 @@
#include <mach/platform.h>
#include <asm/hardware/timer-sp.h>
+#include <plat/sched_clock.h>
+
#include "core.h"
/*
@@ -886,6 +888,12 @@
}
/*
+ * The sched_clock counter
+ */
+#define REFCOUNTER (__io_address(VERSATILE_SYS_BASE) + \
+ VERSATILE_SYS_24MHz_OFFSET)
+
+/*
* Where is the timer (VA)?
*/
#define TIMER0_VA_BASE __io_address(VERSATILE_TIMER0_1_BASE)
@@ -900,6 +908,8 @@
{
u32 val;
+ versatile_sched_clock_init(REFCOUNTER, 24000000);
+
/*
* set clock frequency:
* VERSATILE_REFCLK is 32KHz
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 91ff2e0..de13603 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -18,11 +18,12 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/timer-sp.h>
#include <mach/clkdev.h>
#include <mach/motherboard.h>
-#include <asm/hardware/timer-sp.h>
+#include <plat/sched_clock.h>
#include "core.h"
@@ -50,6 +51,8 @@
static void __init v2m_timer_init(void)
{
+ versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
+
writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index b80f769..4b089cb 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -153,7 +153,6 @@
.rating = 200,
.read = nuc900_get_cycles,
.mask = CLOCKSOURCE_MASK(TDR_SHIFT),
- .shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -176,9 +175,7 @@
val |= (COUNTEN | PERIOD | PRESCALE);
__raw_writel(val, REG_TCSR1);
- clocksource_nuc900.mult =
- clocksource_khz2mult((rate / 1000), clocksource_nuc900.shift);
- clocksource_register(&clocksource_nuc900);
+ clocksource_register_hz(&clocksource_nuc900, rate);
}
static void __init nuc900_timer_init(void)
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 558cdfa..07f23bb 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -17,6 +17,7 @@
#include <linux/interrupt.h>
#include <linux/time.h>
#include <linux/init.h>
+#include <linux/sched.h>
#include <linux/timex.h>
#include <linux/sched.h>
#include <linux/io.h>
@@ -24,6 +25,7 @@
#include <linux/clockchips.h>
#include <mach/hardware.h>
#include <asm/irq.h>
+#include <asm/sched_clock.h>
#include <asm/uaccess.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
@@ -50,15 +52,21 @@
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+static DEFINE_CLOCK_DATA(cd);
+
/*
* IOP sched_clock() implementation via its clocksource.
*/
-unsigned long long sched_clock(void)
+unsigned long long notrace sched_clock(void)
{
- cycle_t cyc = iop_clocksource_read(NULL);
- struct clocksource *cs = &iop_clocksource;
+ u32 cyc = 0xffffffffu - read_tcr1();
+ return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
- return clocksource_cyc2ns(cyc, cs->mult, cs->shift);
+static void notrace iop_update_sched_clock(void)
+{
+ u32 cyc = 0xffffffffu - read_tcr1();
+ update_sched_clock(&cd, cyc, (u32)~0);
}
/*
@@ -88,6 +96,7 @@
case CLOCK_EVT_MODE_PERIODIC:
write_tmr0(tmr & ~IOP_TMR_EN);
write_tcr0(ticks_per_jiffy - 1);
+ write_trr0(ticks_per_jiffy - 1);
tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN);
break;
case CLOCK_EVT_MODE_ONESHOT:
@@ -143,6 +152,8 @@
{
u32 timer_ctl;
+ init_sched_clock(&cd, iop_update_sched_clock, 32, tick_rate);
+
ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
iop_tick_rate = tick_rate;
@@ -153,6 +164,7 @@
* Set up interrupting clockevent timer 0.
*/
write_tmr0(timer_ctl & ~IOP_TMR_EN);
+ write_tisr(1);
setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
clockevents_calc_mult_shift(&iop_clockevent,
tick_rate, IOP_MIN_RANGE);
@@ -162,9 +174,6 @@
clockevent_delta2ns(0xf, &iop_clockevent);
iop_clockevent.cpumask = cpumask_of(0);
clockevents_register_device(&iop_clockevent);
- write_trr0(ticks_per_jiffy - 1);
- write_tcr0(ticks_per_jiffy - 1);
- write_tmr0(timer_ctl);
/*
* Set up free-running clocksource timer 1.
@@ -172,7 +181,5 @@
write_trr1(0xffffffff);
write_tcr1(0xffffffff);
write_tmr1(timer_ctl);
- clocksource_calc_mult_shift(&iop_clocksource, tick_rate,
- IOP_MIN_RANGE);
- clocksource_register(&iop_clocksource);
+ clocksource_register_hz(&iop_clocksource, tick_rate);
}
diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c
index ee9582f..d69d343 100644
--- a/arch/arm/plat-mxc/epit.c
+++ b/arch/arm/plat-mxc/epit.c
@@ -93,7 +93,6 @@
.rating = 200,
.read = epit_read,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -101,9 +100,7 @@
{
unsigned int c = clk_get_rate(timer_clk);
- clocksource_epit.mult = clocksource_hz2mult(c,
- clocksource_epit.shift);
- clocksource_register(&clocksource_epit);
+ clocksource_register_hz(&clocksource_epit, c);
return 0;
}
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index f9a1b05..9f0c261 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -120,7 +120,6 @@
.rating = 200,
.read = mx1_2_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -131,9 +130,7 @@
if (timer_is_v2())
clocksource_mxc.read = v2_get_cycles;
- clocksource_mxc.mult = clocksource_hz2mult(c,
- clocksource_mxc.shift);
- clocksource_register(&clocksource_mxc);
+ clocksource_register_hz(&clocksource_mxc, c);
return 0;
}
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
index 5da3f97..187f4e8 100644
--- a/arch/arm/plat-nomadik/Kconfig
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -14,6 +14,7 @@
config HAS_MTU
bool
+ select HAVE_SCHED_CLOCK
help
Support for Multi Timer Unit. MTU provides access
to multiple interrupt generating programmable
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 63cdc60..4172340 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -17,9 +17,9 @@
#include <linux/clk.h>
#include <linux/jiffies.h>
#include <linux/err.h>
-#include <linux/cnt32_to_63.h>
-#include <linux/timer.h>
+#include <linux/sched.h>
#include <asm/mach/time.h>
+#include <asm/sched_clock.h>
#include <plat/mtu.h>
@@ -52,81 +52,24 @@
* Override the global weak sched_clock symbol with this
* local implementation which uses the clocksource to get some
* better resolution when scheduling the kernel.
- *
- * Because the hardware timer period may be quite short
- * (32.3 secs on the 133 MHz MTU timer selection on ux500)
- * and because cnt32_to_63() needs to be called at least once per
- * half period to work properly, a kernel keepwarm() timer is set up
- * to ensure this requirement is always met.
- *
- * Also the sched_clock timer will wrap around at some point,
- * here we set it to run continously for a year.
*/
-#define SCHED_CLOCK_MIN_WRAP 3600*24*365
-static struct timer_list cnt32_to_63_keepwarm_timer;
-static u32 sched_mult;
-static u32 sched_shift;
+static DEFINE_CLOCK_DATA(cd);
unsigned long long notrace sched_clock(void)
{
- u64 cycles;
+ u32 cyc;
if (unlikely(!mtu_base))
return 0;
- cycles = cnt32_to_63(-readl(mtu_base + MTU_VAL(0)));
- /*
- * sched_mult is guaranteed to be even so will
- * shift out bit 63
- */
- return (cycles * sched_mult) >> sched_shift;
+ cyc = -readl(mtu_base + MTU_VAL(0));
+ return cyc_to_sched_clock(&cd, cyc, (u32)~0);
}
-/* Just kick sched_clock every so often */
-static void cnt32_to_63_keepwarm(unsigned long data)
+static void notrace nomadik_update_sched_clock(void)
{
- mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
- (void) sched_clock();
-}
-
-/*
- * Set up a timer to keep sched_clock():s 32_to_63 algorithm warm
- * once in half a 32bit timer wrap interval.
- */
-static void __init nmdk_sched_clock_init(unsigned long rate)
-{
- u32 v;
- unsigned long delta;
- u64 days;
-
- /* Find the apropriate mult and shift factors */
- clocks_calc_mult_shift(&sched_mult, &sched_shift,
- rate, NSEC_PER_SEC, SCHED_CLOCK_MIN_WRAP);
- /* We need to multiply by an even number to get rid of bit 63 */
- if (sched_mult & 1)
- sched_mult++;
-
- /* Let's see what we get, take max counter and scale it */
- days = (0xFFFFFFFFFFFFFFFFLLU * sched_mult) >> sched_shift;
- do_div(days, NSEC_PER_SEC);
- do_div(days, (3600*24));
-
- pr_info("sched_clock: using %d bits @ %lu Hz wrap in %lu days\n",
- (64 - sched_shift), rate, (unsigned long) days);
-
- /*
- * Program a timer to kick us at half 32bit wraparound
- * Formula: seconds per wrap = (2^32) / f
- */
- v = 0xFFFFFFFFUL / rate;
- /* We want half of the wrap time to keep cnt32_to_63 warm */
- v /= 2;
- pr_debug("sched_clock: prescaled timer rate: %lu Hz, "
- "initialize keepwarm timer every %d seconds\n", rate, v);
- /* Convert seconds to jiffies */
- delta = msecs_to_jiffies(v*1000);
- setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, delta);
- mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + delta));
+ u32 cyc = -readl(mtu_base + MTU_VAL(0));
+ update_sched_clock(&cd, cyc, (u32)~0);
}
/* Clockevent device: use one-shot mode */
@@ -222,7 +165,6 @@
} else {
cr |= MTU_CRn_PRESCALE_1;
}
- clocksource_calc_mult_shift(&nmdk_clksrc, rate, MTU_MIN_RANGE);
/* Timer 0 is the free running clocksource */
writel(cr, mtu_base + MTU_CR(0));
@@ -233,11 +175,11 @@
/* Now the clock source is ready */
nmdk_clksrc.read = nmdk_read_timer;
- if (clocksource_register(&nmdk_clksrc))
+ if (clocksource_register_hz(&nmdk_clksrc, rate))
pr_err("timer: failed to initialize clock source %s\n",
nmdk_clksrc.name);
- nmdk_sched_clock_init(rate);
+ init_sched_clock(&cd, nomadik_update_sched_clock, 32, rate);
/* Timer 1 is used for events */
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index 8722a13..ea46440 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -15,8 +15,11 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
-#include <linux/io.h>
#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sched.h>
+
+#include <asm/sched_clock.h>
#include <plat/common.h>
#include <plat/board.h>
@@ -45,7 +48,7 @@
static u32 offset_32k __read_mostly;
#ifdef CONFIG_ARCH_OMAP16XX
-static cycle_t omap16xx_32k_read(struct clocksource *cs)
+static cycle_t notrace omap16xx_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k;
}
@@ -54,7 +57,7 @@
#endif
#ifdef CONFIG_ARCH_OMAP2420
-static cycle_t omap2420_32k_read(struct clocksource *cs)
+static cycle_t notrace omap2420_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k;
}
@@ -63,7 +66,7 @@
#endif
#ifdef CONFIG_ARCH_OMAP2430
-static cycle_t omap2430_32k_read(struct clocksource *cs)
+static cycle_t notrace omap2430_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k;
}
@@ -72,7 +75,7 @@
#endif
#ifdef CONFIG_ARCH_OMAP3
-static cycle_t omap34xx_32k_read(struct clocksource *cs)
+static cycle_t notrace omap34xx_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k;
}
@@ -81,7 +84,7 @@
#endif
#ifdef CONFIG_ARCH_OMAP4
-static cycle_t omap44xx_32k_read(struct clocksource *cs)
+static cycle_t notrace omap44xx_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k;
}
@@ -93,7 +96,7 @@
* Kernel assumes that sched_clock can be called early but may not have
* things ready yet.
*/
-static cycle_t omap_32k_read_dummy(struct clocksource *cs)
+static cycle_t notrace omap_32k_read_dummy(struct clocksource *cs)
{
return 0;
}
@@ -103,7 +106,6 @@
.rating = 250,
.read = omap_32k_read_dummy,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -111,10 +113,25 @@
* Returns current time from boot in nsecs. It's OK for this to wrap
* around for now, as it's just a relative time stamp.
*/
-unsigned long long sched_clock(void)
+static DEFINE_CLOCK_DATA(cd);
+
+/*
+ * Constants generated by clocks_calc_mult_shift(m, s, 32768, NSEC_PER_SEC, 60).
+ * This gives a resolution of about 30us and a wrap period of about 36hrs.
+ */
+#define SC_MULT 4000000000u
+#define SC_SHIFT 17
+
+unsigned long long notrace sched_clock(void)
{
- return clocksource_cyc2ns(clocksource_32k.read(&clocksource_32k),
- clocksource_32k.mult, clocksource_32k.shift);
+ u32 cyc = clocksource_32k.read(&clocksource_32k);
+ return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
+}
+
+static void notrace omap_update_sched_clock(void)
+{
+ u32 cyc = clocksource_32k.read(&clocksource_32k);
+ update_sched_clock(&cd, cyc, (u32)~0);
}
/**
@@ -168,13 +185,13 @@
if (!IS_ERR(sync_32k_ick))
clk_enable(sync_32k_ick);
- clocksource_32k.mult = clocksource_hz2mult(32768,
- clocksource_32k.shift);
-
offset_32k = clocksource_32k.read(&clocksource_32k);
- if (clocksource_register(&clocksource_32k))
+ if (clocksource_register_hz(&clocksource_32k, 32768))
printk(err, clocksource_32k.name);
+
+ init_fixed_sched_clock(&cd, omap_update_sched_clock, 32,
+ 32768, SC_MULT, SC_SHIFT);
}
return 0;
}
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 715a301..c3da247 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -13,11 +13,11 @@
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/cnt32_to_63.h>
#include <linux/timer.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <asm/sched_clock.h>
#include <asm/mach/time.h>
#include <mach/bridge-regs.h>
#include <mach/hardware.h>
@@ -44,52 +44,26 @@
/*
* Orion's sched_clock implementation. It has a resolution of
- * at least 7.5ns (133MHz TCLK) and a maximum value of 834 days.
- *
- * Because the hardware timer period is quite short (21 secs if
- * 200MHz TCLK) and because cnt32_to_63() needs to be called at
- * least once per half period to work properly, a kernel timer is
- * set up to ensure this requirement is always met.
+ * at least 7.5ns (133MHz TCLK).
*/
-#define TCLK2NS_SCALE_FACTOR 8
+static DEFINE_CLOCK_DATA(cd);
-static unsigned long tclk2ns_scale;
-
-unsigned long long sched_clock(void)
+unsigned long long notrace sched_clock(void)
{
- unsigned long long v = cnt32_to_63(0xffffffff - readl(TIMER0_VAL));
- return (v * tclk2ns_scale) >> TCLK2NS_SCALE_FACTOR;
+ u32 cyc = 0xffffffff - readl(TIMER0_VAL);
+ return cyc_to_sched_clock(&cd, cyc, (u32)~0);
}
-static struct timer_list cnt32_to_63_keepwarm_timer;
-static void cnt32_to_63_keepwarm(unsigned long data)
+static void notrace orion_update_sched_clock(void)
{
- mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
- (void) sched_clock();
+ u32 cyc = 0xffffffff - readl(TIMER0_VAL);
+ update_sched_clock(&cd, cyc, (u32)~0);
}
static void __init setup_sched_clock(unsigned long tclk)
{
- unsigned long long v;
- unsigned long data;
-
- v = NSEC_PER_SEC;
- v <<= TCLK2NS_SCALE_FACTOR;
- v += tclk/2;
- do_div(v, tclk);
- /*
- * We want an even value to automatically clear the top bit
- * returned by cnt32_to_63() without an additional run time
- * instruction. So if the LSB is 1 then round it up.
- */
- if (v & 1)
- v++;
- tclk2ns_scale = v;
-
- data = (0xffffffffUL / tclk / 2 - 2) * HZ;
- setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, data);
- mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
+ init_sched_clock(&cd, orion_update_sched_clock, 32, tclk);
}
/*
@@ -102,7 +76,6 @@
static struct clocksource orion_clksrc = {
.name = "orion_clocksource",
- .shift = 20,
.rating = 300,
.read = orion_clksrc_read,
.mask = CLOCKSOURCE_MASK(32),
@@ -245,8 +218,7 @@
writel(u & ~BRIDGE_INT_TIMER0, BRIDGE_MASK);
u = readl(TIMER_CTRL);
writel(u | TIMER0_EN | TIMER0_RELOAD_EN, TIMER_CTRL);
- orion_clksrc.mult = clocksource_hz2mult(tclk, orion_clksrc.shift);
- clocksource_register(&orion_clksrc);
+ clocksource_register_hz(&orion_clksrc, tclk);
/*
* Setup clockevent timer (interrupt-driven.)
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index ab21165..839c88d 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -81,8 +81,6 @@
.rating = 200, /* its a pretty decent clock */
.read = clocksource_read_cycles,
.mask = 0xFFFF, /* 16 bits */
- .mult = 0, /* to be computed */
- .shift = 0, /* to be computed */
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -105,10 +103,8 @@
val |= CTRL_ENABLE ;
writew(val, gpt_base + CR(CLKSRC));
- clocksource_calc_mult_shift(&clksrc, tick_rate, SPEAR_MIN_RANGE);
-
/* register the clocksource */
- clocksource_register(&clksrc);
+ clocksource_register_hz(&clksrc, tick_rate);
}
static struct clock_event_device clkevt = {
diff --git a/arch/arm/plat-stmp3xxx/timer.c b/arch/arm/plat-stmp3xxx/timer.c
index 063c7bc..c395630 100644
--- a/arch/arm/plat-stmp3xxx/timer.c
+++ b/arch/arm/plat-stmp3xxx/timer.c
@@ -89,7 +89,6 @@
.rating = 250,
.read = stmp3xxx_clock_read,
.mask = CLOCKSOURCE_MASK(16),
- .shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
@@ -106,8 +105,6 @@
*/
static void __init stmp3xxx_init_timer(void)
{
- cksrc_stmp3xxx.mult = clocksource_hz2mult(CLOCK_TICK_RATE,
- cksrc_stmp3xxx.shift);
ckevt_timrot.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
ckevt_timrot.shift);
ckevt_timrot.min_delta_ns = clockevent_delta2ns(2, &ckevt_timrot);
@@ -140,7 +137,7 @@
setup_irq(IRQ_TIMER0, &stmp3xxx_timer_irq);
- clocksource_register(&cksrc_stmp3xxx);
+ clocksource_register_hz(&cksrc_stmp3xxx, CLOCK_TICK_RATE);
clockevents_register_device(&ckevt_timrot);
}
diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile
index aaa571d..16dde08 100644
--- a/arch/arm/plat-versatile/Makefile
+++ b/arch/arm/plat-versatile/Makefile
@@ -1,6 +1,7 @@
obj-y := clock.o
-obj-$(CONFIG_ARCH_REALVIEW) += sched-clock.o
-obj-$(CONFIG_ARCH_VERSATILE) += sched-clock.o
+ifneq ($(CONFIG_ARCH_INTEGRATOR),y)
+obj-y += sched-clock.o
+endif
ifeq ($(CONFIG_LEDS_CLASS),y)
obj-$(CONFIG_ARCH_REALVIEW) += leds.o
obj-$(CONFIG_ARCH_VERSATILE) += leds.o
diff --git a/arch/arm/plat-versatile/include/plat/sched_clock.h b/arch/arm/plat-versatile/include/plat/sched_clock.h
new file mode 100644
index 0000000..5c3e4fc
--- /dev/null
+++ b/arch/arm/plat-versatile/include/plat/sched_clock.h
@@ -0,0 +1,6 @@
+#ifndef ARM_PLAT_SCHED_CLOCK_H
+#define ARM_PLAT_SCHED_CLOCK_H
+
+void versatile_sched_clock_init(void __iomem *, unsigned long);
+
+#endif
diff --git a/arch/arm/plat-versatile/sched-clock.c b/arch/arm/plat-versatile/sched-clock.c
index 9768cf7..3d6a4c2 100644
--- a/arch/arm/plat-versatile/sched-clock.c
+++ b/arch/arm/plat-versatile/sched-clock.c
@@ -18,36 +18,41 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/cnt32_to_63.h>
#include <linux/io.h>
-#include <asm/div64.h>
+#include <linux/sched.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
+#include <asm/sched_clock.h>
+#include <plat/sched_clock.h>
-#ifdef VERSATILE_SYS_BASE
-#define REFCOUNTER (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
-#endif
-
-#ifdef REALVIEW_SYS_BASE
-#define REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
-#endif
+static DEFINE_CLOCK_DATA(cd);
+static void __iomem *ctr;
/*
- * This is the Realview and Versatile sched_clock implementation. This
- * has a resolution of 41.7ns, and a maximum value of about 35583 days.
- *
- * The return value is guaranteed to be monotonic in that range as
- * long as there is always less than 89 seconds between successive
- * calls to this function.
+ * Constants generated by clocks_calc_mult_shift(m, s, 24MHz, NSEC_PER_SEC, 60).
+ * This gives a resolution of about 41ns and a wrap period of about 178s.
*/
-unsigned long long sched_clock(void)
+#define SC_MULT 2796202667u
+#define SC_SHIFT 26
+
+unsigned long long notrace sched_clock(void)
{
- unsigned long long v = cnt32_to_63(readl(REFCOUNTER));
+ if (ctr) {
+ u32 cyc = readl(ctr);
+ return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0,
+ SC_MULT, SC_SHIFT);
+ } else
+ return 0;
+}
- /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */
- v *= 125<<1;
- do_div(v, 3<<1);
+static void notrace versatile_update_sched_clock(void)
+{
+ u32 cyc = readl(ctr);
+ update_sched_clock(&cd, cyc, (u32)~0);
+}
- return v;
+void __init versatile_sched_clock_init(void __iomem *reg, unsigned long rate)
+{
+ ctr = reg;
+ init_fixed_sched_clock(&cd, versatile_update_sched_clock,
+ 32, rate, SC_MULT, SC_SHIFT);
}
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index c18d7ef..df140cd 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -152,6 +152,7 @@
*/
for (sft = 32; sft > 0; sft--) {
tmp = (u64) to << sft;
+ tmp += from / 2;
do_div(tmp, from);
if ((tmp >> sftacc) == 0)
break;