[SCSI] libsas: Convert sas_proto users to sas_protocol
sparse complains about the mixing of enums in libsas. Since the
underlying numeric values of both enums are the same, combine them
to get rid of the warning.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/aic94xx/aic94xx_dev.c b/drivers/scsi/aic94xx/aic94xx_dev.c
index 3dce618..72042ca 100644
--- a/drivers/scsi/aic94xx/aic94xx_dev.c
+++ b/drivers/scsi/aic94xx/aic94xx_dev.c
@@ -165,7 +165,7 @@
if (dev->port->oob_mode != SATA_OOB_MODE) {
flags |= OPEN_REQUIRED;
if ((dev->dev_type == SATA_DEV) ||
- (dev->tproto & SAS_PROTO_STP)) {
+ (dev->tproto & SAS_PROTOCOL_STP)) {
struct smp_resp *rps_resp = &dev->sata_dev.rps_resp;
if (rps_resp->frame_type == SMP_RESPONSE &&
rps_resp->function == SMP_REPORT_PHY_SATA &&
@@ -193,7 +193,7 @@
asd_ddbsite_write_byte(asd_ha, ddb, DDB_TARG_FLAGS, flags);
flags = 0;
- if (dev->tproto & SAS_PROTO_STP)
+ if (dev->tproto & SAS_PROTOCOL_STP)
flags |= STP_CL_POL_NO_TX;
asd_ddbsite_write_byte(asd_ha, ddb, DDB_TARG_FLAGS2, flags);
@@ -201,7 +201,7 @@
asd_ddbsite_write_word(asd_ha, ddb, SEND_QUEUE_TAIL, 0xFFFF);
asd_ddbsite_write_word(asd_ha, ddb, SISTER_DDB, 0xFFFF);
- if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTO_STP)) {
+ if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
i = asd_init_sata(dev);
if (i < 0) {
asd_free_ddb(asd_ha, ddb);
diff --git a/drivers/scsi/aic94xx/aic94xx_dump.c b/drivers/scsi/aic94xx/aic94xx_dump.c
index 6bd8e30..3d8c4ff 100644
--- a/drivers/scsi/aic94xx/aic94xx_dump.c
+++ b/drivers/scsi/aic94xx/aic94xx_dump.c
@@ -903,11 +903,11 @@
int i;
switch ((dl->status_block[1] & 0x70) >> 3) {
- case SAS_PROTO_STP:
+ case SAS_PROTOCOL_STP:
ASD_DPRINTK("STP proto device-to-host FIS:\n");
break;
default:
- case SAS_PROTO_SSP:
+ case SAS_PROTOCOL_SSP:
ASD_DPRINTK("SAS proto IDENTIFY:\n");
break;
}
diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.c b/drivers/scsi/aic94xx/aic94xx_hwi.c
index 0cd7eed..098b5f3 100644
--- a/drivers/scsi/aic94xx/aic94xx_hwi.c
+++ b/drivers/scsi/aic94xx/aic94xx_hwi.c
@@ -91,7 +91,7 @@
sas_phy->enabled = 1;
sas_phy->class = SAS;
- sas_phy->iproto = SAS_PROTO_ALL;
+ sas_phy->iproto = SAS_PROTOCOL_ALL;
sas_phy->tproto = 0;
sas_phy->type = PHY_TYPE_PHYSICAL;
sas_phy->role = PHY_ROLE_INITIATOR;
diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c
index db6ab1a..0febad4 100644
--- a/drivers/scsi/aic94xx/aic94xx_scb.c
+++ b/drivers/scsi/aic94xx/aic94xx_scb.c
@@ -788,12 +788,12 @@
/* initiator port settings are in the hi nibble */
if (phy->sas_phy.role == PHY_ROLE_INITIATOR)
- control_phy->port_type = SAS_PROTO_ALL << 4;
+ control_phy->port_type = SAS_PROTOCOL_ALL << 4;
else if (phy->sas_phy.role == PHY_ROLE_TARGET)
- control_phy->port_type = SAS_PROTO_ALL;
+ control_phy->port_type = SAS_PROTOCOL_ALL;
else
control_phy->port_type =
- (SAS_PROTO_ALL << 4) | SAS_PROTO_ALL;
+ (SAS_PROTOCOL_ALL << 4) | SAS_PROTOCOL_ALL;
/* link reset retries, this should be nominal */
control_phy->link_reset_retries = 10;
diff --git a/drivers/scsi/aic94xx/aic94xx_task.c b/drivers/scsi/aic94xx/aic94xx_task.c
index ee0a98b..663fdef 100644
--- a/drivers/scsi/aic94xx/aic94xx_task.c
+++ b/drivers/scsi/aic94xx/aic94xx_task.c
@@ -187,7 +187,7 @@
ts->buf_valid_size = 0;
edb = asd_ha->seq.edb_arr[edb_id + escb->edb_index];
r = edb->vaddr;
- if (task->task_proto == SAS_PROTO_SSP) {
+ if (task->task_proto == SAS_PROTOCOL_SSP) {
struct ssp_response_iu *iu =
r + 16 + sizeof(struct ssp_frame_hdr);
@@ -341,14 +341,14 @@
}
switch (task->task_proto) {
- case SATA_PROTO:
- case SAS_PROTO_STP:
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
asd_unbuild_ata_ascb(ascb);
break;
- case SAS_PROTO_SMP:
+ case SAS_PROTOCOL_SMP:
asd_unbuild_smp_ascb(ascb);
break;
- case SAS_PROTO_SSP:
+ case SAS_PROTOCOL_SSP:
asd_unbuild_ssp_ascb(ascb);
default:
break;
@@ -586,17 +586,17 @@
list_for_each_entry(a, &alist, list) {
t = a->uldd_task;
a->uldd_timer = 1;
- if (t->task_proto & SAS_PROTO_STP)
- t->task_proto = SAS_PROTO_STP;
+ if (t->task_proto & SAS_PROTOCOL_STP)
+ t->task_proto = SAS_PROTOCOL_STP;
switch (t->task_proto) {
- case SATA_PROTO:
- case SAS_PROTO_STP:
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
res = asd_build_ata_ascb(a, t, gfp_flags);
break;
- case SAS_PROTO_SMP:
+ case SAS_PROTOCOL_SMP:
res = asd_build_smp_ascb(a, t, gfp_flags);
break;
- case SAS_PROTO_SSP:
+ case SAS_PROTOCOL_SSP:
res = asd_build_ssp_ascb(a, t, gfp_flags);
break;
default:
@@ -633,14 +633,14 @@
t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
spin_unlock_irqrestore(&t->task_state_lock, flags);
switch (t->task_proto) {
- case SATA_PROTO:
- case SAS_PROTO_STP:
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
asd_unbuild_ata_ascb(a);
break;
- case SAS_PROTO_SMP:
+ case SAS_PROTOCOL_SMP:
asd_unbuild_smp_ascb(a);
break;
- case SAS_PROTO_SSP:
+ case SAS_PROTOCOL_SSP:
asd_unbuild_ssp_ascb(a);
default:
break;
diff --git a/drivers/scsi/aic94xx/aic94xx_tmf.c b/drivers/scsi/aic94xx/aic94xx_tmf.c
index c0d0b7d..87b2f6e 100644
--- a/drivers/scsi/aic94xx/aic94xx_tmf.c
+++ b/drivers/scsi/aic94xx/aic94xx_tmf.c
@@ -372,21 +372,21 @@
scb->header.opcode = ABORT_TASK;
switch (task->task_proto) {
- case SATA_PROTO:
- case SAS_PROTO_STP:
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
scb->abort_task.proto_conn_rate = (1 << 5); /* STP */
break;
- case SAS_PROTO_SSP:
+ case SAS_PROTOCOL_SSP:
scb->abort_task.proto_conn_rate = (1 << 4); /* SSP */
scb->abort_task.proto_conn_rate |= task->dev->linkrate;
break;
- case SAS_PROTO_SMP:
+ case SAS_PROTOCOL_SMP:
break;
default:
break;
}
- if (task->task_proto == SAS_PROTO_SSP) {
+ if (task->task_proto == SAS_PROTOCOL_SSP) {
scb->abort_task.ssp_frame.frame_type = SSP_TASK;
memcpy(scb->abort_task.ssp_frame.hashed_dest_addr,
task->dev->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
@@ -512,7 +512,7 @@
int res = 1;
struct scb *scb;
- if (!(dev->tproto & SAS_PROTO_SSP))
+ if (!(dev->tproto & SAS_PROTOCOL_SSP))
return TMF_RESP_FUNC_ESUPP;
ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL);