| /* |
| * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| */ |
| |
| #ifndef __MTD_MTD_H__ |
| #define __MTD_MTD_H__ |
| |
| #include <linux/types.h> |
| #include <linux/uio.h> |
| #include <linux/notifier.h> |
| #include <linux/device.h> |
| |
| #include <mtd/mtd-abi.h> |
| |
| #include <asm/div64.h> |
| |
| #define MTD_CHAR_MAJOR 90 |
| #define MTD_BLOCK_MAJOR 31 |
| |
| #define MTD_ERASE_PENDING 0x01 |
| #define MTD_ERASING 0x02 |
| #define MTD_ERASE_SUSPEND 0x04 |
| #define MTD_ERASE_DONE 0x08 |
| #define MTD_ERASE_FAILED 0x10 |
| |
| #define MTD_FAIL_ADDR_UNKNOWN -1LL |
| |
| /* |
| * If the erase fails, fail_addr might indicate exactly which block failed. If |
| * fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level |
| * or was not specific to any particular block. |
| */ |
| struct erase_info { |
| struct mtd_info *mtd; |
| uint64_t addr; |
| uint64_t len; |
| uint64_t fail_addr; |
| u_long time; |
| u_long retries; |
| unsigned dev; |
| unsigned cell; |
| void (*callback) (struct erase_info *self); |
| u_long priv; |
| u_char state; |
| struct erase_info *next; |
| }; |
| |
| struct mtd_erase_region_info { |
| uint64_t offset; /* At which this region starts, from the beginning of the MTD */ |
| uint32_t erasesize; /* For this region */ |
| uint32_t numblocks; /* Number of blocks of erasesize in this region */ |
| unsigned long *lockmap; /* If keeping bitmap of locks */ |
| }; |
| |
| /** |
| * struct mtd_oob_ops - oob operation operands |
| * @mode: operation mode |
| * |
| * @len: number of data bytes to write/read |
| * |
| * @retlen: number of data bytes written/read |
| * |
| * @ooblen: number of oob bytes to write/read |
| * @oobretlen: number of oob bytes written/read |
| * @ooboffs: offset of oob data in the oob area (only relevant when |
| * mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW) |
| * @datbuf: data buffer - if NULL only oob data are read/written |
| * @oobbuf: oob data buffer |
| * |
| * Note, it is allowed to read more than one OOB area at one go, but not write. |
| * The interface assumes that the OOB write requests program only one page's |
| * OOB area. |
| */ |
| struct mtd_oob_ops { |
| unsigned int mode; |
| size_t len; |
| size_t retlen; |
| size_t ooblen; |
| size_t oobretlen; |
| uint32_t ooboffs; |
| uint8_t *datbuf; |
| uint8_t *oobbuf; |
| }; |
| |
| #define MTD_MAX_OOBFREE_ENTRIES_LARGE 32 |
| #define MTD_MAX_ECCPOS_ENTRIES_LARGE 448 |
| /* |
| * Internal ECC layout control structure. For historical reasons, there is a |
| * similar, smaller struct nand_ecclayout_user (in mtd-abi.h) that is retained |
| * for export to user-space via the ECCGETLAYOUT ioctl. |
| * nand_ecclayout should be expandable in the future simply by the above macros. |
| */ |
| struct nand_ecclayout { |
| __u32 eccbytes; |
| __u32 eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE]; |
| __u32 oobavail; |
| struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE]; |
| }; |
| |
| struct module; /* only needed for owner field in mtd_info */ |
| |
| struct mtd_info { |
| u_char type; |
| uint32_t flags; |
| uint64_t size; // Total size of the MTD |
| |
| /* "Major" erase size for the device. Naïve users may take this |
| * to be the only erase size available, or may use the more detailed |
| * information below if they desire |
| */ |
| uint32_t erasesize; |
| /* Minimal writable flash unit size. In case of NOR flash it is 1 (even |
| * though individual bits can be cleared), in case of NAND flash it is |
| * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR |
| * it is of ECC block size, etc. It is illegal to have writesize = 0. |
| * Any driver registering a struct mtd_info must ensure a writesize of |
| * 1 or larger. |
| */ |
| uint32_t writesize; |
| |
| /* |
| * Size of the write buffer used by the MTD. MTD devices having a write |
| * buffer can write multiple writesize chunks at a time. E.g. while |
| * writing 4 * writesize bytes to a device with 2 * writesize bytes |
| * buffer the MTD driver can (but doesn't have to) do 2 writesize |
| * operations, but not 4. Currently, all NANDs have writebufsize |
| * equivalent to writesize (NAND page size). Some NOR flashes do have |
| * writebufsize greater than writesize. |
| */ |
| uint32_t writebufsize; |
| |
| uint32_t oobsize; // Amount of OOB data per block (e.g. 16) |
| uint32_t oobavail; // Available OOB bytes per block |
| |
| /* |
| * If erasesize is a power of 2 then the shift is stored in |
| * erasesize_shift otherwise erasesize_shift is zero. Ditto writesize. |
| */ |
| unsigned int erasesize_shift; |
| unsigned int writesize_shift; |
| /* Masks based on erasesize_shift and writesize_shift */ |
| unsigned int erasesize_mask; |
| unsigned int writesize_mask; |
| |
| // Kernel-only stuff starts here. |
| const char *name; |
| int index; |
| |
| /* ECC layout structure pointer - read only! */ |
| struct nand_ecclayout *ecclayout; |
| |
| /* Data for variable erase regions. If numeraseregions is zero, |
| * it means that the whole device has erasesize as given above. |
| */ |
| int numeraseregions; |
| struct mtd_erase_region_info *eraseregions; |
| |
| /* |
| * Do not call via these pointers, use corresponding mtd_*() |
| * wrappers instead. |
| */ |
| int (*erase) (struct mtd_info *mtd, struct erase_info *instr); |
| int (*point) (struct mtd_info *mtd, loff_t from, size_t len, |
| size_t *retlen, void **virt, resource_size_t *phys); |
| void (*unpoint) (struct mtd_info *mtd, loff_t from, size_t len); |
| unsigned long (*get_unmapped_area) (struct mtd_info *mtd, |
| unsigned long len, |
| unsigned long offset, |
| unsigned long flags); |
| int (*read) (struct mtd_info *mtd, loff_t from, size_t len, |
| size_t *retlen, u_char *buf); |
| int (*write) (struct mtd_info *mtd, loff_t to, size_t len, |
| size_t *retlen, const u_char *buf); |
| int (*panic_write) (struct mtd_info *mtd, loff_t to, size_t len, |
| size_t *retlen, const u_char *buf); |
| int (*read_oob) (struct mtd_info *mtd, loff_t from, |
| struct mtd_oob_ops *ops); |
| int (*write_oob) (struct mtd_info *mtd, loff_t to, |
| struct mtd_oob_ops *ops); |
| int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, |
| size_t len); |
| int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, |
| size_t len, size_t *retlen, u_char *buf); |
| int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, |
| size_t len); |
| int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, |
| size_t len, size_t *retlen, u_char *buf); |
| int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t to, size_t len, |
| size_t *retlen, u_char *buf); |
| int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, |
| size_t len); |
| int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, |
| unsigned long count, loff_t to, size_t *retlen); |
| void (*sync) (struct mtd_info *mtd); |
| int (*lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); |
| int (*unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); |
| int (*is_locked) (struct mtd_info *mtd, loff_t ofs, uint64_t len); |
| int (*block_isbad) (struct mtd_info *mtd, loff_t ofs); |
| int (*block_markbad) (struct mtd_info *mtd, loff_t ofs); |
| int (*suspend) (struct mtd_info *mtd); |
| void (*resume) (struct mtd_info *mtd); |
| |
| /* Backing device capabilities for this device |
| * - provides mmap capabilities |
| */ |
| struct backing_dev_info *backing_dev_info; |
| |
| struct notifier_block reboot_notifier; /* default mode before reboot */ |
| |
| /* ECC status information */ |
| struct mtd_ecc_stats ecc_stats; |
| /* Subpage shift (NAND) */ |
| int subpage_sft; |
| |
| void *priv; |
| |
| struct module *owner; |
| struct device dev; |
| int usecount; |
| |
| /* If the driver is something smart, like UBI, it may need to maintain |
| * its own reference counting. The below functions are only for driver. |
| * The driver may register its callbacks. These callbacks are not |
| * supposed to be called by MTD users */ |
| int (*get_device) (struct mtd_info *mtd); |
| void (*put_device) (struct mtd_info *mtd); |
| }; |
| |
| /* |
| * Erase is an asynchronous operation. Device drivers are supposed |
| * to call instr->callback() whenever the operation completes, even |
| * if it completes with a failure. |
| * Callers are supposed to pass a callback function and wait for it |
| * to be called before writing to the block. |
| */ |
| static inline int mtd_erase(struct mtd_info *mtd, struct erase_info *instr) |
| { |
| return mtd->erase(mtd, instr); |
| } |
| |
| /* |
| * This stuff for eXecute-In-Place. phys is optional and may be set to NULL. |
| */ |
| static inline int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, |
| size_t *retlen, void **virt, resource_size_t *phys) |
| { |
| return mtd->point(mtd, from, len, retlen, virt, phys); |
| } |
| |
| /* We probably shouldn't allow XIP if the unpoint isn't a NULL */ |
| static inline void mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len) |
| { |
| return mtd->unpoint(mtd, from, len); |
| } |
| |
| /* |
| * Allow NOMMU mmap() to directly map the device (if not NULL) |
| * - return the address to which the offset maps |
| * - return -ENOSYS to indicate refusal to do the mapping |
| */ |
| static inline unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, |
| unsigned long len, |
| unsigned long offset, |
| unsigned long flags) |
| { |
| return mtd->get_unmapped_area(mtd, len, offset, flags); |
| } |
| |
| static inline int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, |
| size_t *retlen, u_char *buf) |
| { |
| return mtd->read(mtd, from, len, retlen, buf); |
| } |
| |
| static inline int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, |
| size_t *retlen, const u_char *buf) |
| { |
| return mtd->write(mtd, to, len, retlen, buf); |
| } |
| |
| /* |
| * In blackbox flight recorder like scenarios we want to make successful writes |
| * in interrupt context. panic_write() is only intended to be called when its |
| * known the kernel is about to panic and we need the write to succeed. Since |
| * the kernel is not going to be running for much longer, this function can |
| * break locks and delay to ensure the write succeeds (but not sleep). |
| */ |
| static inline int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, |
| size_t *retlen, const u_char *buf) |
| { |
| return mtd->panic_write(mtd, to, len, retlen, buf); |
| } |
| |
| static inline int mtd_read_oob(struct mtd_info *mtd, loff_t from, |
| struct mtd_oob_ops *ops) |
| { |
| return mtd->read_oob(mtd, from, ops); |
| } |
| |
| static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to, |
| struct mtd_oob_ops *ops) |
| { |
| return mtd->write_oob(mtd, to, ops); |
| } |
| |
| /* |
| * Method to access the protection register area, present in some flash |
| * devices. The user data is one time programmable but the factory data is read |
| * only. |
| */ |
| static inline int mtd_get_fact_prot_info(struct mtd_info *mtd, |
| struct otp_info *buf, size_t len) |
| { |
| return mtd->get_fact_prot_info(mtd, buf, len); |
| } |
| |
| static inline int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, |
| size_t len, size_t *retlen, |
| u_char *buf) |
| { |
| return mtd->read_fact_prot_reg(mtd, from, len, retlen, buf); |
| } |
| |
| static inline int mtd_get_user_prot_info(struct mtd_info *mtd, |
| struct otp_info *buf, |
| size_t len) |
| { |
| return mtd->get_user_prot_info(mtd, buf, len); |
| } |
| |
| static inline int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, |
| size_t len, size_t *retlen, |
| u_char *buf) |
| { |
| return mtd->read_user_prot_reg(mtd, from, len, retlen, buf); |
| } |
| |
| static inline int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, |
| size_t len, size_t *retlen, |
| u_char *buf) |
| { |
| return mtd->write_user_prot_reg(mtd, to, len, retlen, buf); |
| } |
| |
| static inline int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, |
| size_t len) |
| { |
| return mtd->lock_user_prot_reg(mtd, from, len); |
| } |
| |
| /* |
| * kvec-based read/write method. NB: The 'count' parameter is the number of |
| * _vectors_, each of which contains an (ofs, len) tuple. |
| */ |
| static inline int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, |
| unsigned long count, loff_t to, size_t *retlen) |
| { |
| return mtd->writev(mtd, vecs, count, to, retlen); |
| } |
| |
| static inline void mtd_sync(struct mtd_info *mtd) |
| { |
| mtd->sync(mtd); |
| } |
| |
| /* Chip-supported device locking */ |
| static inline int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) |
| { |
| return mtd->lock(mtd, ofs, len); |
| } |
| |
| static inline int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) |
| { |
| return mtd->unlock(mtd, ofs, len); |
| } |
| |
| static inline int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) |
| { |
| return mtd->is_locked(mtd, ofs, len); |
| } |
| |
| static inline int mtd_suspend(struct mtd_info *mtd) |
| { |
| return mtd->suspend(mtd); |
| } |
| |
| static inline void mtd_resume(struct mtd_info *mtd) |
| { |
| mtd->resume(mtd); |
| } |
| |
| static inline int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs) |
| { |
| return mtd->block_isbad(mtd, ofs); |
| } |
| |
| static inline int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs) |
| { |
| return mtd->block_markbad(mtd, ofs); |
| } |
| |
| static inline struct mtd_info *dev_to_mtd(struct device *dev) |
| { |
| return dev ? dev_get_drvdata(dev) : NULL; |
| } |
| |
| static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd) |
| { |
| if (mtd->erasesize_shift) |
| return sz >> mtd->erasesize_shift; |
| do_div(sz, mtd->erasesize); |
| return sz; |
| } |
| |
| static inline uint32_t mtd_mod_by_eb(uint64_t sz, struct mtd_info *mtd) |
| { |
| if (mtd->erasesize_shift) |
| return sz & mtd->erasesize_mask; |
| return do_div(sz, mtd->erasesize); |
| } |
| |
| static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd) |
| { |
| if (mtd->writesize_shift) |
| return sz >> mtd->writesize_shift; |
| do_div(sz, mtd->writesize); |
| return sz; |
| } |
| |
| static inline uint32_t mtd_mod_by_ws(uint64_t sz, struct mtd_info *mtd) |
| { |
| if (mtd->writesize_shift) |
| return sz & mtd->writesize_mask; |
| return do_div(sz, mtd->writesize); |
| } |
| |
| /* Kernel-side ioctl definitions */ |
| |
| struct mtd_partition; |
| struct mtd_part_parser_data; |
| |
| extern int mtd_device_parse_register(struct mtd_info *mtd, |
| const char **part_probe_types, |
| struct mtd_part_parser_data *parser_data, |
| const struct mtd_partition *defparts, |
| int defnr_parts); |
| #define mtd_device_register(master, parts, nr_parts) \ |
| mtd_device_parse_register(master, NULL, NULL, parts, nr_parts) |
| extern int mtd_device_unregister(struct mtd_info *master); |
| extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num); |
| extern int __get_mtd_device(struct mtd_info *mtd); |
| extern void __put_mtd_device(struct mtd_info *mtd); |
| extern struct mtd_info *get_mtd_device_nm(const char *name); |
| extern void put_mtd_device(struct mtd_info *mtd); |
| |
| |
| struct mtd_notifier { |
| void (*add)(struct mtd_info *mtd); |
| void (*remove)(struct mtd_info *mtd); |
| struct list_head list; |
| }; |
| |
| |
| extern void register_mtd_user (struct mtd_notifier *new); |
| extern int unregister_mtd_user (struct mtd_notifier *old); |
| |
| int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, |
| unsigned long count, loff_t to, size_t *retlen); |
| |
| int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs, |
| unsigned long count, loff_t from, size_t *retlen); |
| |
| void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size); |
| |
| void mtd_erase_callback(struct erase_info *instr); |
| |
| static inline int mtd_is_bitflip(int err) { |
| return err == -EUCLEAN; |
| } |
| |
| static inline int mtd_is_eccerr(int err) { |
| return err == -EBADMSG; |
| } |
| |
| static inline int mtd_is_bitflip_or_eccerr(int err) { |
| return mtd_is_bitflip(err) || mtd_is_eccerr(err); |
| } |
| |
| #endif /* __MTD_MTD_H__ */ |