diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index a33ddea..d86aae0 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -1,4 +1,9 @@
-  0 -> Terratec Cinergy 250 USB                            [0ccd:0036]
-  1 -> Pinnacle PCTV USB 2                                 [2304:0208]
-  2 -> Hauppauge WinTV USB 2                               [2040:4200]
-  3 -> MSI VOX USB 2.0                                     [eb1a:2820]
+  0 -> Unknown EM2800 video grabber             (em2800)        [eb1a:2800]
+  1 -> Unknown EM2820/2840 video grabber        (em2820/em2840) [eb1a:2820]
+  2 -> Terratec Cinergy 250 USB                 (em2820/em2840) [0ccd:0036]
+  3 -> Pinnacle PCTV USB 2                      (em2820/em2840) [2304:0208]
+  4 -> Hauppauge WinTV USB 2                    (em2820/em2840) [2040:4200]
+  5 -> MSI VOX USB 2.0                          (em2820/em2840)
+  6 -> Terratec Cinergy 200 USB                 (em2800)
+  7 -> Leadtek Winfast USB II                   (em2800)
+  8 -> Kworld USB2800                           (em2800)
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 7333bba..91c70eb 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -1,5 +1,5 @@
 /*
-   em2820-cards.c - driver for Empia EM2820/2840 USB video capture devices
+   em2820-cards.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
 
    Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com>
                       Ludovico Cavedon <cavedon@sssup.it>
@@ -35,14 +35,43 @@
 
 #include "em2820.h"
 
-enum em2820_board_entry {
-	EM2820_BOARD_TERRATEC_CINERGY_250,
-	EM2820_BOARD_PINNACLE_USB_2,
-	EM2820_BOARD_HAUPPAUGE_WINTV_USB_2,
-	EM2820_BOARD_MSI_VOX_USB_2
-};
-
 struct em2820_board em2820_boards[] = {
+	[EM2800_BOARD_UNKNOWN] = {
+		.name         = "Unknown EM2800 video grabber",
+		.is_em2800    = 1,
+		.vchannels    = 2,
+		.norm         = VIDEO_MODE_PAL,
+		.tda9887_conf = TDA9887_PRESENT,
+		.has_tuner    = 1,
+		.decoder      = EM2820_SAA7113,
+		.input           = {{
+			.type     = EM2820_VMUX_COMPOSITE1,
+			.vmux     = 0,
+			.amux     = 1,
+		},{
+			.type     = EM2820_VMUX_SVIDEO,
+			.vmux     = 9,
+			.amux     = 1,
+		}},
+	},
+	[EM2820_BOARD_UNKNOWN] = {
+		.name         = "Unknown EM2820/2840 video grabber",
+		.is_em2800    = 0,
+		.vchannels    = 2,
+		.norm         = VIDEO_MODE_PAL,
+		.tda9887_conf = TDA9887_PRESENT,
+		.has_tuner    = 1,
+		.decoder      = EM2820_SAA7113,
+		.input           = {{
+			.type     = EM2820_VMUX_COMPOSITE1,
+			.vmux     = 0,
+			.amux     = 1,
+		},{
+			.type     = EM2820_VMUX_SVIDEO,
+			.vmux     = 9,
+			.amux     = 1,
+		}},
+	},
 	[EM2820_BOARD_TERRATEC_CINERGY_250] = {
 		.name         = "Terratec Cinergy 250 USB",
 		.vchannels    = 3,
@@ -129,17 +158,88 @@
 			.amux     = 1,
 		}},
 	},
-	{ }  /* Terminating entry */
+	[EM2800_BOARD_TERRATEC_CINERGY_200] = {
+		.name         = "Terratec Cinergy 200 USB",
+		.chip_id      = 0x4,
+		.is_em2800    = 1,
+		.vchannels    = 3,
+		.norm         = VIDEO_MODE_PAL,
+		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
+		.tda9887_conf = TDA9887_PRESENT,
+		.has_tuner    = 1,
+		.decoder      = EM2820_SAA7113,
+		.input          = {{
+			.type     = EM2820_VMUX_TELEVISION,
+			.vmux     = 2,
+			.amux     = 0,
+		},{
+			.type     = EM2820_VMUX_COMPOSITE1,
+			.vmux     = 0,
+			.amux     = 1,
+		},{
+			.type     = EM2820_VMUX_SVIDEO,
+			.vmux     = 9,
+			.amux     = 1,
+		}},
+	},
+	[EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
+		.name         = "Leadtek Winfast USB II",
+		.chip_id      = 0x2,
+		.is_em2800    = 1,
+		.vchannels    = 3,
+		.norm         = VIDEO_MODE_PAL,
+		.tuner_type   = TUNER_LG_PAL_NEW_TAPC,
+		.tda9887_conf = TDA9887_PRESENT,
+		.has_tuner    = 1,
+		.decoder      = EM2820_SAA7113,
+		.input          = {{
+			.type     = EM2820_VMUX_TELEVISION,
+			.vmux     = 2,
+			.amux     = 0,
+		},{
+			.type     = EM2820_VMUX_COMPOSITE1,
+			.vmux     = 0,
+			.amux     = 1,
+		},{
+			.type     = EM2820_VMUX_SVIDEO,
+			.vmux     = 9,
+			.amux     = 1,
+		}},
+	},
+	[EM2800_BOARD_KWORLD_USB2800] = {
+		.name         = "Kworld USB2800",
+		.chip_id      = 0x7,
+		.is_em2800    = 1,
+		.vchannels    = 3,
+		.norm         = VIDEO_MODE_PAL,
+		.tuner_type   = TUNER_PHILIPS_ATSC,
+		.tda9887_conf = TDA9887_PRESENT,
+		.has_tuner    = 1,
+		.decoder      = EM2820_SAA7113,
+		.input          = {{
+			.type     = EM2820_VMUX_TELEVISION,
+			.vmux     = 2,
+			.amux     = 0,
+		},{
+			.type     = EM2820_VMUX_COMPOSITE1,
+			.vmux     = 0,
+			.amux     = 1,
+		},{
+			.type     = EM2820_VMUX_SVIDEO,
+			.vmux     = 9,
+			.amux     = 1,
+		}},
+	},
 };
+const unsigned int em2820_bcount = ARRAY_SIZE(em2820_boards);
 
 /* table of devices that work with this driver */
 struct usb_device_id em2820_id_table [] = {
- /* Terratec Cinerhy 200 USB: em2800 nor supported, at the moment */
- /*	{ USB_DEVICE(0xeb1a, 0x2800), .driver_info = EM2800_BOARD_TERRATEC_CINERGY_200 }, */
+	{ USB_DEVICE(0xeb1a, 0x2800), .driver_info = EM2800_BOARD_UNKNOWN },
+	{ USB_DEVICE(0xeb1a, 0x2820), .driver_info = EM2820_BOARD_UNKNOWN },
 	{ USB_DEVICE(0x0ccd, 0x0036), .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
 	{ USB_DEVICE(0x2304, 0x0208), .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
 	{ USB_DEVICE(0x2040, 0x4200), .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
-	{ USB_DEVICE(0xeb1a, 0x2820), .driver_info = EM2820_BOARD_MSI_VOX_USB_2 },
 	{ },
 };
 
@@ -163,6 +263,7 @@
 }
 
 EXPORT_SYMBOL(em2820_boards);
+EXPORT_SYMBOL(em2820_bcount);
 EXPORT_SYMBOL(em2820_id_table);
 
 MODULE_DEVICE_TABLE (usb, em2820_id_table);
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index e187422..594e6d6 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -1,5 +1,5 @@
 /*
-   em2820-core.c - driver for Empia EM2820/2840 USB video capture devices
+   em2820-core.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
 
    Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com>
                       Ludovico Cavedon <cavedon@sssup.it>
@@ -562,6 +562,11 @@
 	void *fieldstart, *startwrite, *startread;
 	int linesdone, currlinedone, offset, lencopy,remain;
 
+	if(dev->frame_size != (*f)->buf.length){
+		em2820_err("frame_size %i and buf.length %i are different!!!\n",dev->frame_size,(*f)->buf.length);
+		return;
+	}
+
 	if ((*f)->fieldbytesused + len > dev->field_size)
 		len =dev->field_size - (*f)->fieldbytesused;
 	remain = len;
@@ -780,6 +785,11 @@
 	dev->alt = alt;
 	if (dev->alt == 0) {
 		int i;
+		if(dev->is_em2800){ /* always use the max packet size for em2800 based devices */
+			for(i=0;i< EM2820_MAX_ALT; i++)
+				if(dev->alt_max_pkt_size[i]>dev->alt_max_pkt_size[dev->alt])
+					dev->alt=i;
+		}else{
 		unsigned int min_pkt_size = dev->field_size / 137;	/* FIXME: empiric magic number */
 		em2820_coredbg("minimum isoc packet size: %u", min_pkt_size);
 		dev->alt = 7;
@@ -788,6 +798,7 @@
 			dev->alt = i;
 			break;
 			}
+		}
 	}
 
 	if (dev->alt != prev_alt) {
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index 3065ddb..b7360d5 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -1,5 +1,5 @@
 /*
-   em2820-i2c.c - driver for Empia EM2820/2840 USB video capture devices
+   em2820-i2c.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
 
    Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com>
                       Ludovico Cavedon <cavedon@sssup.it>
@@ -29,11 +29,6 @@
 #include <media/tuner.h>
 #include <linux/video_decoder.h>
 
-/* To be moved to compat.h */
-#if !defined(I2C_HW_B_EM2820)
-#define I2C_HW_B_EM2820 0x99
-#endif
-
 #include "em2820.h"
 
 /* ----------------------------------------------------------- */
@@ -56,11 +51,132 @@
 			printk(fmt , ##args); } while (0)
 
 /*
- * i2c_send_bytes()
+ * em2800_i2c_send_max4()
+ * send up to 4 bytes to the i2c device
+ */
+static int em2800_i2c_send_max4(struct em2820 *dev, unsigned char addr,
+				char *buf, int len)
+{
+	int ret;
+	int write_timeout;
+	unsigned char b2[6];
+	BUG_ON(len < 1 || len > 4);
+	b2[5] = 0x80 + len - 1;
+	b2[4] = addr;
+	b2[3] = buf[0];
+	if (len > 1)
+		b2[2] = buf[1];
+	if (len > 2)
+		b2[1] = buf[2];
+	if (len > 3)
+		b2[0] = buf[3];
+
+	ret = dev->em2820_write_regs(dev, 4 - len, &b2[4 - len], 2 + len);
+	if (ret != 2 + len) {
+		em2820_warn("writting to i2c device failed (error=%i)\n", ret);
+		return -EIO;
+	}
+	for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0;
+	     write_timeout -= 5) {
+		ret = dev->em2820_read_reg(dev, 0x05);
+		if (ret == 0x80 + len - 1)
+			return len;
+		mdelay(5);
+	}
+	em2820_warn("i2c write timed out\n");
+	return -EIO;
+}
+
+/*
+ * em2800_i2c_send_bytes()
+ */
+static int em2800_i2c_send_bytes(void *data, unsigned char addr, char *buf,
+				 short len)
+{
+	char *bufPtr = buf;
+	int ret;
+	int wrcount = 0;
+	int count;
+	int maxLen = 4;
+	struct em2820 *dev = (struct em2820 *)data;
+	while (len > 0) {
+		count = (len > maxLen) ? maxLen : len;
+		ret = em2800_i2c_send_max4(dev, addr, bufPtr, count);
+		if (ret > 0) {
+			len -= count;
+			bufPtr += count;
+			wrcount += count;
+		} else
+			return (ret < 0) ? ret : -EFAULT;
+	}
+	return wrcount;
+}
+
+/*
+ * em2800_i2c_check_for_device()
+ * check if there is a i2c_device at the supplied address
+ */
+static int em2800_i2c_check_for_device(struct em2820 *dev, unsigned char addr)
+{
+	char msg;
+	int ret;
+	int write_timeout;
+	msg = addr;
+	ret = dev->em2820_write_regs(dev, 0x04, &msg, 1);
+	if (ret < 0) {
+		em2820_warn("setting i2c device address failed (error=%i)\n",
+			    ret);
+		return ret;
+	}
+	msg = 0x84;
+	ret = dev->em2820_write_regs(dev, 0x05, &msg, 1);
+	if (ret < 0) {
+		em2820_warn("preparing i2c read failed (error=%i)\n", ret);
+		return ret;
+	}
+	for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0;
+	     write_timeout -= 5) {
+		unsigned msg = dev->em2820_read_reg(dev, 0x5);
+		if (msg == 0x94)
+			return -ENODEV;
+		else if (msg == 0x84)
+			return 0;
+		mdelay(5);
+	}
+	return -ENODEV;
+}
+
+/*
+ * em2800_i2c_recv_bytes()
+ * read from the i2c device
+ */
+static int em2800_i2c_recv_bytes(struct em2820 *dev, unsigned char addr,
+				 char *buf, int len)
+{
+	int ret;
+	/* check for the device and set i2c read address */
+	ret = em2800_i2c_check_for_device(dev, addr);
+	if (ret) {
+		em2820_warn
+		    ("preparing read at i2c address 0x%x failed (error=%i)\n",
+		     addr, ret);
+		return ret;
+	}
+	ret = dev->em2820_read_reg_req_len(dev, 0x0, 0x3, buf, len);
+	if (ret < 0) {
+		em2820_warn("reading from i2c device at 0x%x failed (error=%i)",
+			    addr, ret);
+		return ret;
+	}
+	return ret;
+}
+
+/*
+ * em2820_i2c_send_bytes()
  * untested for more than 4 bytes
  */
-static int i2c_send_bytes(void *data, unsigned char addr, char *buf, short len,
-			  int stop)
+static int em2820_i2c_send_bytes(void *data, unsigned char addr, char *buf,
+				 short len, int stop)
 {
 	int wrcount = 0;
 	struct em2820 *dev = (struct em2820 *)data;
@@ -71,11 +187,11 @@
 }
 
 /*
- * i2c_recv_byte()
+ * em2820_i2c_recv_bytes()
  * read a byte from the i2c device
  */
-static int i2c_recv_bytes(struct em2820 *dev, unsigned char addr, char *buf,
-			  int len)
+static int em2820_i2c_recv_bytes(struct em2820 *dev, unsigned char addr,
+				 char *buf, int len)
 {
 	int ret;
 	ret = dev->em2820_read_reg_req_len(dev, 2, addr, buf, len);
@@ -89,10 +205,10 @@
 }
 
 /*
- * i2c_check_for_device()
+ * em2820_i2c_check_for_device()
  * check if there is a i2c_device at the supplied address
  */
-static int i2c_check_for_device(struct em2820 *dev, unsigned char addr)
+static int em2820_i2c_check_for_device(struct em2820 *dev, unsigned char addr)
 {
 	char msg;
 	int ret;
@@ -126,18 +242,25 @@
 			 (msgs[i].flags & I2C_M_RD) ? "read" : "write",
 			 i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
 		if (!msgs[i].len) {	/* no len: check only for device presence */
-			rc = i2c_check_for_device(dev, addr);
+			if (dev->is_em2800)
+				rc = em2800_i2c_check_for_device(dev, addr);
+			else
+				rc = em2820_i2c_check_for_device(dev, addr);
 			if (rc < 0) {
 				dprintk2(" no device\n");
 				return rc;
 			}
 
-		}
-		if (msgs[i].flags & I2C_M_RD) {
+		} else if (msgs[i].flags & I2C_M_RD) {
 			/* read bytes */
-
-			rc = i2c_recv_bytes(dev, addr, msgs[i].buf,
-					    msgs[i].len);
+			if (dev->is_em2800)
+				rc = em2800_i2c_recv_bytes(dev, addr,
+							   msgs[i].buf,
+							   msgs[i].len);
+			else
+				rc = em2820_i2c_recv_bytes(dev, addr,
+							   msgs[i].buf,
+							   msgs[i].len);
 			if (i2c_debug) {
 				for (byte = 0; byte < msgs[i].len; byte++) {
 					printk(" %02x", msgs[i].buf[byte]);
@@ -149,8 +272,15 @@
 				for (byte = 0; byte < msgs[i].len; byte++)
 					printk(" %02x", msgs[i].buf[byte]);
 			}
-			rc = i2c_send_bytes(dev, addr, msgs[i].buf, msgs[i].len,
-					    i == num - 1);
+			if (dev->is_em2800)
+				rc = em2800_i2c_send_bytes(dev, addr,
+							   msgs[i].buf,
+							   msgs[i].len);
+			else
+				rc = em2820_i2c_send_bytes(dev, addr,
+							   msgs[i].buf,
+							   msgs[i].len,
+							   i == num - 1);
 			if (rc < 0)
 				goto err;
 		}
@@ -171,6 +301,12 @@
 	int i, err, size = len, block;
 
 	dev->i2c_client.addr = 0xa0 >> 1;
+
+	/* Check if board has eeprom */
+	err = i2c_master_recv(&dev->i2c_client, &buf, 0);
+	if (err < 0)
+		return -1;
+
 	buf = 0;
 	if (1 != (err = i2c_master_send(&dev->i2c_client, &buf, 1))) {
 		printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n",
@@ -389,7 +525,7 @@
 		rc = i2c_master_recv(c, &buf, 0);
 		if (rc < 0)
 			continue;
-		printk(KERN_INFO "%s: found device @ 0x%x [%s]", name,
+		printk(KERN_INFO "%s: found i2c device @ 0x%x [%s]\n", name,
 		       i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
 	}
 }
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 7e4114e..d3a959b 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1,5 +1,5 @@
 /*
-   em2820-video.c - driver for Empia EM2820/2840 USB video capture devices
+   em2820-video.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
 
    Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com>
                       Ludovico Cavedon <cavedon@sssup.it>
@@ -50,6 +50,11 @@
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
+static unsigned int card[]  = {[0 ... (EM2820_MAXBOARDS - 1)] = UNSET };
+
+module_param_array(card,  int, NULL, 0444);
+MODULE_PARM_DESC(card,"card type");
+
 static int tuner = -1;
 module_param(tuner, int, 0444);
 MODULE_PARM_DESC(tuner, "tuner type");
@@ -1081,7 +1086,7 @@
 			struct v4l2_cropcap *cc = arg;
 
 			if (cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-				return EINVAL;
+				return -EINVAL;
 			cc->bounds.left = 0;
 			cc->bounds.top = 0;
 			cc->bounds.width = dev->width;
@@ -1520,21 +1525,12 @@
 static int em2820_init_dev(struct em2820 **devhandle, struct usb_device *udev,
 			   int minor, int model)
 {
-	struct em2820 *dev;
+	struct em2820 *dev = *devhandle;
 	int retval = -ENOMEM;
 	int errCode, i;
 	unsigned int maxh, maxw;
 	struct usb_interface *uif;
 
-	/* allocate memory for our device state and initialize it */
-	dev = kmalloc(sizeof(*dev), GFP_KERNEL);
-	if (dev == NULL) {
-		em2820_err(DRIVER_NAME ": out of memory!\n");
-		return -ENOMEM;
-	}
-	memset(dev, 0x00, sizeof(*dev));
-
-	snprintf(dev->name, 29, "em2820 #%d", minor);
 	dev->udev = udev;
 	dev->model = model;
 	init_MUTEX(&dev->lock);
@@ -1545,6 +1541,7 @@
 	dev->em2820_read_reg_req_len = em2820_read_reg_req_len;
 	dev->em2820_write_regs_req = em2820_write_regs_req;
 	dev->em2820_read_reg_req = em2820_read_reg_req;
+	dev->is_em2800 = em2820_boards[model].is_em2800;
 	dev->has_tuner = em2820_boards[model].has_tuner;
 	dev->has_msp34xx = em2820_boards[model].has_msp34xx;
 	dev->tda9887_conf = em2820_boards[model].tda9887_conf;
@@ -1595,7 +1592,7 @@
 	/* compute alternate max packet sizes */
 	uif = dev->udev->actconfig->interface[0];
 	dev->alt_max_pkt_size[0] = 0;
-	for (i = 1; i <= EM2820_MAX_ALT; i++) {
+	for (i = 1; i <= EM2820_MAX_ALT && i < uif->num_altsetting ; i++) {
 		u16 tmp =
 		    le16_to_cpu(uif->altsetting[i].endpoint[1].desc.
 				wMaxPacketSize);
@@ -1688,7 +1685,6 @@
 	em2820_info("V4L2 device registered as /dev/video%d\n",
 		    dev->vdev->minor);
 
-	*devhandle = dev;
 	return 0;
 }
 
@@ -1703,27 +1699,68 @@
 	struct usb_device *udev;
 	struct em2820 *dev = NULL;
 	int retval = -ENODEV;
+	int model,i,nr;
 
 	udev = usb_get_dev(interface_to_usbdev(interface));
 	endpoint = &interface->cur_altsetting->endpoint[1].desc;
 
+	/* Don't register audio interfaces */
+	if (interface->altsetting[1].desc.bInterfaceClass == USB_CLASS_AUDIO)
+		return -ENODEV;
+
 	/* check if the the device has the iso in endpoint at the correct place */
 	if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
 	    USB_ENDPOINT_XFER_ISOC) {
-/*		em2820_err(DRIVER_NAME " probing error: endpoint is non-ISO endpoint!\n"); */
+		em2820_err(DRIVER_NAME " probing error: endpoint is non-ISO endpoint!\n");
 		return -ENODEV;
 	}
 	if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
-/*		em2820_err(DRIVER_NAME " probing error: endpoint is ISO OUT endpoint!\n"); */
+		em2820_err(DRIVER_NAME " probing error: endpoint is ISO OUT endpoint!\n");
 		return -ENODEV;
 	}
 
+	model=id->driver_info;
+	nr=interface->minor;
+
+	if (nr>EM2820_MAXBOARDS) {
+		printk ("em2820: Supports only %i em28xx boards.\n",EM2820_MAXBOARDS);
+		return -ENOMEM;
+	}
+
+	/* allocate memory for our device state and initialize it */
+	dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+	if (dev == NULL) {
+		em2820_err(DRIVER_NAME ": out of memory!\n");
+		return -ENOMEM;
+	}
+	memset(dev, 0, sizeof(*dev));
+
+	snprintf(dev->name, 29, "em2820 #%d", nr);
+
+	if ((card[nr]>=0)&&(card[nr]<em2820_bcount))
+		model=card[nr];
+
+	if ((model==EM2800_BOARD_UNKNOWN)||(model==EM2820_BOARD_UNKNOWN)) {
+		printk( "%s: Your board has no eeprom inside it and thus can't\n"
+			"%s: be autodetected.  Please pass card=<n> insmod option to\n"
+			"%s: workaround that.  Redirect complaints to the vendor of\n"
+			"%s: the TV card.  Best regards,\n"
+			"%s:         -- tux\n",
+			dev->name,dev->name,dev->name,dev->name,dev->name);
+		printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n",
+			dev->name);
+		for (i = 0; i < em2820_bcount; i++) {
+			printk("%s:    card=%d -> %s\n",
+				dev->name, i, em2820_boards[i].name);
+		}
+	}
+
 	/* allocate device struct */
-	retval = em2820_init_dev(&dev, udev, interface->minor, id->driver_info);
+	retval = em2820_init_dev(&dev, udev, nr, model);
 	if (retval)
 		return retval;
 
-	em2820_info("Found %s\n", em2820_boards[id->driver_info].name);
+	em2820_info("Found %s\n", em2820_boards[model].name);
 
 	/* save our data pointer in this interface device */
 	usb_set_intfdata(interface, dev);
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 7779121..4115938 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -1,5 +1,5 @@
 /*
-   em2820-cards.c - driver for Empia EM2820/2840 USB video capture devices
+   em2820-cards.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
 
    Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com>
                       Ludovico Cavedon <cavedon@sssup.it>
@@ -28,6 +28,23 @@
 #include <linux/videodev.h>
 #include <linux/i2c.h>
 
+/* Boards supported by driver */
+
+#define EM2800_BOARD_UNKNOWN			0
+#define EM2820_BOARD_UNKNOWN			1
+#define EM2820_BOARD_TERRATEC_CINERGY_250	2
+#define EM2820_BOARD_PINNACLE_USB_2		3
+#define EM2820_BOARD_HAUPPAUGE_WINTV_USB_2      4
+#define EM2820_BOARD_MSI_VOX_USB_2              5
+#define EM2800_BOARD_TERRATEC_CINERGY_200       6
+#define EM2800_BOARD_LEADTEK_WINFAST_USBII      7
+#define EM2800_BOARD_KWORLD_USB2800             8
+
+#define UNSET -1
+
+/* maximum number of em28xx boards */
+#define EM2820_MAXBOARDS 1 /*FIXME: should be bigger */
+
 /* maximum number of frames that can be queued */
 #define EM2820_NUM_FRAMES 5
 /* number of frames that get used for v4l2_read() */
@@ -79,6 +96,9 @@
 /* time to wait when stopping the isoc transfer */
 #define EM2820_URB_TIMEOUT       msecs_to_jiffies(EM2820_NUM_BUFS * EM2820_NUM_PACKETS)
 
+/* time in msecs to wait for i2c writes to finish */
+#define EM2800_I2C_WRITE_TIMEOUT 20
+
 /* the various frame states */
 enum em2820_frame_state {
 	F_UNUSED = 0,
@@ -145,12 +165,13 @@
 
 struct em2820_board {
 	char *name;
-
+	unsigned char chip_id;
 	int vchannels;
 	int norm;
 	int tuner_type;
 
 	/* i2c flags */
+	unsigned int is_em2800;
 	unsigned int tda9887_conf;
 
 	unsigned int has_tuner:1;
@@ -195,6 +216,7 @@
 	/* generic device properties */
 	char name[30];		/* name (including minor) of the device */
 	int model;		/* index in the device_data struct */
+	unsigned int is_em2800;
 	int video_inputs;	/* number of video inputs */
 	unsigned int has_tuner:1;
 	unsigned int has_msp34xx:1;
@@ -304,11 +326,14 @@
 int em2820_set_alternate(struct em2820 *dev);
 
 /* Provided by em2820-cards.c */
+extern int em2800_variant_detect(struct usb_device* udev,int model);
 extern void em2820_card_setup(struct em2820 *dev);
 extern struct em2820_board em2820_boards[];
 extern struct usb_device_id em2820_id_table[];
+extern const unsigned int em2820_bcount;
 
 /* em2820 registers */
+#define CHIPID_REG	0x0a
 #define USBSUSP_REG	0x0c	/* */
 
 #define AUDIOSRC_REG	0x0e