blob: 7fb92f23f380a60c66a01eb7a5314ac6bbe79a93 [file] [log] [blame]
/*
* Copyright (C) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>
* IBM, Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#undef DEBUG
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/pci.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/ppc-pci.h>
#define SPIDER_PCI_REG_BASE 0xd000
#define SPIDER_PCI_VCI_CNTL_STAT 0x0110
#define SPIDER_PCI_DUMMY_READ 0x0810
#define SPIDER_PCI_DUMMY_READ_BASE 0x0814
/* Undefine that to re-enable bogus prefetch
*
* Without that workaround, the chip will do bogus prefetch past
* page boundary from system memory. This setting will disable that,
* though the documentation is unclear as to the consequences of doing
* so, either purely performances, or possible misbehaviour... It's not
* clear wether the chip can handle unaligned accesses at all without
* prefetching enabled.
*
* For now, things appear to be behaving properly with that prefetching
* disabled and IDE, possibly because IDE isn't doing any unaligned
* access.
*/
#define SPIDER_DISABLE_PREFETCH
#define MAX_SPIDERS 3
static struct spider_pci_bus {
void __iomem *regs;
unsigned long mmio_start;
unsigned long mmio_end;
unsigned long pio_vstart;
unsigned long pio_vend;
} spider_pci_busses[MAX_SPIDERS];
static int spider_pci_count;
static struct spider_pci_bus *spider_pci_find(unsigned long vaddr,
unsigned long paddr)
{
int i;
for (i = 0; i < spider_pci_count; i++) {
struct spider_pci_bus *bus = &spider_pci_busses[i];
if (paddr && paddr >= bus->mmio_start && paddr < bus->mmio_end)
return bus;
if (vaddr && vaddr >= bus->pio_vstart && vaddr < bus->pio_vend)
return bus;
}
return NULL;
}
static void spider_io_flush(const volatile void __iomem *addr)
{
struct spider_pci_bus *bus;
int token;
/* Get platform token (set by ioremap) from address */
token = PCI_GET_ADDR_TOKEN(addr);
/* Fast path if we have a non-0 token, it indicates which bus we
* are on.
*
* If the token is 0, that means either that the ioremap was done
* before we initialized this layer, or it's a PIO operation. We
* fallback to a low path in this case. Hopefully, internal devices
* which are ioremap'ed early should use in_XX/out_XX functions
* instead of the PCI ones and thus not suffer from the slowdown.
*
* Also note that currently, the workaround will not work for areas
* that are not mapped with PTEs (bolted in the hash table). This
* is the case for ioremaps done very early at boot (before
* mem_init_done) and includes the mapping of the ISA IO space.
*
* Fortunately, none of the affected devices is expected to do DMA
* and thus there should be no problem in practice.
*
* In order to improve performances, we only do the PTE search for
* addresses falling in the PHB IO space area. That means it will
* not work for hotplug'ed PHBs but those don't exist with Spider.
*/
if (token && token <= spider_pci_count)
bus = &spider_pci_busses[token - 1];
else {
unsigned long vaddr, paddr;
pte_t *ptep;
/* Fixup physical address */
vaddr = (unsigned long)PCI_FIX_ADDR(addr);
/* Check if it's in allowed range for PIO */
if (vaddr < PHBS_IO_BASE || vaddr >= IMALLOC_BASE)
return;
/* Try to find a PTE. If not, clear the paddr, we'll do
* a vaddr only lookup (PIO only)
*/
ptep = find_linux_pte(init_mm.pgd, vaddr);
if (ptep == NULL)
paddr = 0;
else
paddr = pte_pfn(*ptep) << PAGE_SHIFT;
bus = spider_pci_find(vaddr, paddr);
if (bus == NULL)
return;
}
/* Now do the workaround
*/
(void)in_be32(bus->regs + SPIDER_PCI_DUMMY_READ);
}
static u8 spider_readb(const volatile void __iomem *addr)
{
u8 val = __do_readb(addr);
spider_io_flush(addr);
return val;
}
static u16 spider_readw(const volatile void __iomem *addr)
{
u16 val = __do_readw(addr);
spider_io_flush(addr);
return val;
}
static u32 spider_readl(const volatile void __iomem *addr)
{
u32 val = __do_readl(addr);
spider_io_flush(addr);
return val;
}
static u64 spider_readq(const volatile void __iomem *addr)
{
u64 val = __do_readq(addr);
spider_io_flush(addr);
return val;
}
static u16 spider_readw_be(const volatile void __iomem *addr)
{
u16 val = __do_readw_be(addr);
spider_io_flush(addr);
return val;
}
static u32 spider_readl_be(const volatile void __iomem *addr)
{
u32 val = __do_readl_be(addr);
spider_io_flush(addr);
return val;
}
static u64 spider_readq_be(const volatile void __iomem *addr)
{
u64 val = __do_readq_be(addr);
spider_io_flush(addr);
return val;
}
static void spider_readsb(const volatile void __iomem *addr, void *buf,
unsigned long count)
{
__do_readsb(addr, buf, count);
spider_io_flush(addr);
}
static void spider_readsw(const volatile void __iomem *addr, void *buf,
unsigned long count)
{
__do_readsw(addr, buf, count);
spider_io_flush(addr);
}
static void spider_readsl(const volatile void __iomem *addr, void *buf,
unsigned long count)
{
__do_readsl(addr, buf, count);
spider_io_flush(addr);
}
static void spider_memcpy_fromio(void *dest, const volatile void __iomem *src,
unsigned long n)
{
__do_memcpy_fromio(dest, src, n);
spider_io_flush(src);
}
static void __iomem * spider_ioremap(unsigned long addr, unsigned long size,
unsigned long flags)
{
struct spider_pci_bus *bus;
void __iomem *res = __ioremap(addr, size, flags);
int busno;
pr_debug("spider_ioremap(0x%lx, 0x%lx, 0x%lx) -> 0x%p\n",
addr, size, flags, res);
bus = spider_pci_find(0, addr);
if (bus != NULL) {
busno = bus - spider_pci_busses;
pr_debug(" found bus %d, setting token\n", busno);
PCI_SET_ADDR_TOKEN(res, busno + 1);
}
pr_debug(" result=0x%p\n", res);
return res;
}
static void __init spider_pci_setup_chip(struct spider_pci_bus *bus)
{
#ifdef SPIDER_DISABLE_PREFETCH
u32 val = in_be32(bus->regs + SPIDER_PCI_VCI_CNTL_STAT);
pr_debug(" PVCI_Control_Status was 0x%08x\n", val);
out_be32(bus->regs + SPIDER_PCI_VCI_CNTL_STAT, val | 0x8);
#endif
/* Configure the dummy address for the workaround */
out_be32(bus->regs + SPIDER_PCI_DUMMY_READ_BASE, 0x80000000);
}
static void __init spider_pci_add_one(struct pci_controller *phb)
{
struct spider_pci_bus *bus = &spider_pci_busses[spider_pci_count];
struct device_node *np = phb->arch_data;
struct resource rsrc;
void __iomem *regs;
if (spider_pci_count >= MAX_SPIDERS) {
printk(KERN_ERR "Too many spider bridges, workarounds"
" disabled for %s\n", np->full_name);
return;
}
/* Get the registers for the beast */
if (of_address_to_resource(np, 0, &rsrc)) {
printk(KERN_ERR "Failed to get registers for spider %s"
" workarounds disabled\n", np->full_name);
return;
}
/* Mask out some useless bits in there to get to the base of the
* spider chip
*/
rsrc.start &= ~0xfffffffful;
/* Map them */
regs = ioremap(rsrc.start + SPIDER_PCI_REG_BASE, 0x1000);
if (regs == NULL) {
printk(KERN_ERR "Failed to map registers for spider %s"
" workarounds disabled\n", np->full_name);
return;
}
spider_pci_count++;
/* We assume spiders only have one MMIO resource */
bus->mmio_start = phb->mem_resources[0].start;
bus->mmio_end = phb->mem_resources[0].end + 1;
bus->pio_vstart = (unsigned long)phb->io_base_virt;
bus->pio_vend = bus->pio_vstart + phb->pci_io_size;
bus->regs = regs;
printk(KERN_INFO "PCI: Spider MMIO workaround for %s\n",np->full_name);
pr_debug(" mmio (P) = 0x%016lx..0x%016lx\n",
bus->mmio_start, bus->mmio_end);
pr_debug(" pio (V) = 0x%016lx..0x%016lx\n",
bus->pio_vstart, bus->pio_vend);
pr_debug(" regs (P) = 0x%016lx (V) = 0x%p\n",
rsrc.start + SPIDER_PCI_REG_BASE, bus->regs);
spider_pci_setup_chip(bus);
}
static struct ppc_pci_io __initdata spider_pci_io = {
.readb = spider_readb,
.readw = spider_readw,
.readl = spider_readl,
.readq = spider_readq,
.readw_be = spider_readw_be,
.readl_be = spider_readl_be,
.readq_be = spider_readq_be,
.readsb = spider_readsb,
.readsw = spider_readsw,
.readsl = spider_readsl,
.memcpy_fromio = spider_memcpy_fromio,
};
static int __init spider_pci_workaround_init(void)
{
struct pci_controller *phb;
if (!machine_is(cell))
return 0;
/* Find spider bridges. We assume they have been all probed
* in setup_arch(). If that was to change, we would need to
* update this code to cope with dynamically added busses
*/
list_for_each_entry(phb, &hose_list, list_node) {
struct device_node *np = phb->arch_data;
const char *model = of_get_property(np, "model", NULL);
/* If no model property or name isn't exactly "pci", skip */
if (model == NULL || strcmp(np->name, "pci"))
continue;
/* If model is not "Spider", skip */
if (strcmp(model, "Spider"))
continue;
spider_pci_add_one(phb);
}
/* No Spider PCI found, exit */
if (spider_pci_count == 0)
return 0;
/* Setup IO callbacks. We only setup MMIO reads. PIO reads will
* fallback to MMIO reads (though without a token, thus slower)
*/
ppc_pci_io = spider_pci_io;
/* Setup ioremap callback */
ppc_md.ioremap = spider_ioremap;
return 0;
}
arch_initcall(spider_pci_workaround_init);