blob: f64546c6aeb5b63af45dffb0b6dd6efc462f602c [file] [log] [blame]
/*
* Linux-DVB Driver for DiBcom's DiB7000M and
* first generation DiB7000P-demodulator-family.
*
* Copyright (C) 2005-6 DiBcom (http://www.dibcom.fr/)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*/
#include <linux/kernel.h>
#include <linux/i2c.h>
#include "dvb_frontend.h"
#include "dib7000m.h"
static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000M:"); printk(args); } } while (0)
struct dib7000m_state {
struct dvb_frontend demod;
struct dib7000m_config cfg;
u8 i2c_addr;
struct i2c_adapter *i2c_adap;
struct dibx000_i2c_master i2c_master;
/* offset is 1 in case of the 7000MC */
u8 reg_offs;
u16 wbd_ref;
u8 current_band;
fe_bandwidth_t current_bandwidth;
struct dibx000_agc_config *current_agc;
u32 timf;
u16 revision;
};
enum dib7000m_power_mode {
DIB7000M_POWER_ALL = 0,
DIB7000M_POWER_NO,
DIB7000M_POWER_INTERF_ANALOG_AGC,
DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD,
DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD,
DIB7000M_POWER_INTERFACE_ONLY,
};
static u16 dib7000m_read_word(struct dib7000m_state *state, u16 reg)
{
u8 wb[2] = { (reg >> 8) | 0x80, reg & 0xff };
u8 rb[2];
struct i2c_msg msg[2] = {
{ .addr = state->i2c_addr >> 1, .flags = 0, .buf = wb, .len = 2 },
{ .addr = state->i2c_addr >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2 },
};
if (i2c_transfer(state->i2c_adap, msg, 2) != 2)
dprintk("i2c read error on %d\n",reg);
return (rb[0] << 8) | rb[1];
}
static int dib7000m_write_word(struct dib7000m_state *state, u16 reg, u16 val)
{
u8 b[4] = {
(reg >> 8) & 0xff, reg & 0xff,
(val >> 8) & 0xff, val & 0xff,
};
struct i2c_msg msg = {
.addr = state->i2c_addr >> 1, .flags = 0, .buf = b, .len = 4
};
return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
}
static int dib7000m_set_output_mode(struct dib7000m_state *state, int mode)
{
int ret = 0;
u16 outreg, fifo_threshold, smo_mode,
sram = 0x0005; /* by default SRAM output is disabled */
outreg = 0;
fifo_threshold = 1792;
smo_mode = (dib7000m_read_word(state, 294 + state->reg_offs) & 0x0010) | (1 << 1);
dprintk("-I- Setting output mode for demod %p to %d\n",
&state->demod, mode);
switch (mode) {
case OUTMODE_MPEG2_PAR_GATED_CLK: // STBs with parallel gated clock
outreg = (1 << 10); /* 0x0400 */
break;
case OUTMODE_MPEG2_PAR_CONT_CLK: // STBs with parallel continues clock
outreg = (1 << 10) | (1 << 6); /* 0x0440 */
break;
case OUTMODE_MPEG2_SERIAL: // STBs with serial input
outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0482 */
break;
case OUTMODE_DIVERSITY:
if (state->cfg.hostbus_diversity)
outreg = (1 << 10) | (4 << 6); /* 0x0500 */
else
sram |= 0x0c00;
break;
case OUTMODE_MPEG2_FIFO: // e.g. USB feeding
smo_mode |= (3 << 1);
fifo_threshold = 512;
outreg = (1 << 10) | (5 << 6);
break;
case OUTMODE_HIGH_Z: // disable
outreg = 0;
break;
default:
dprintk("Unhandled output_mode passed to be set for demod %p\n",&state->demod);
break;
}
if (state->cfg.output_mpeg2_in_188_bytes)
smo_mode |= (1 << 5) ;
ret |= dib7000m_write_word(state, 294 + state->reg_offs, smo_mode);
ret |= dib7000m_write_word(state, 295 + state->reg_offs, fifo_threshold); /* synchronous fread */
ret |= dib7000m_write_word(state, 1795, outreg);
ret |= dib7000m_write_word(state, 1805, sram);
return ret;
}
static int dib7000m_set_power_mode(struct dib7000m_state *state, enum dib7000m_power_mode mode)
{
/* by default everything is going to be powered off */
u16 reg_903 = 0xffff, reg_904 = 0xffff, reg_905 = 0xffff, reg_906 = 0x3fff;
/* now, depending on the requested mode, we power on */
switch (mode) {
/* power up everything in the demod */
case DIB7000M_POWER_ALL:
reg_903 = 0x0000; reg_904 = 0x0000; reg_905 = 0x0000; reg_906 = 0x0000;
break;
/* just leave power on the control-interfaces: GPIO and (I2C or SDIO or SRAM) */
case DIB7000M_POWER_INTERFACE_ONLY: /* TODO power up either SDIO or I2C or SRAM */
reg_905 &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 2));
break;
case DIB7000M_POWER_INTERF_ANALOG_AGC:
reg_903 &= ~((1 << 15) | (1 << 14) | (1 << 11) | (1 << 10));
reg_905 &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 4) | (1 << 2));
reg_906 &= ~((1 << 0));
break;
case DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD:
reg_903 = 0x0000; reg_904 = 0x801f; reg_905 = 0x0000; reg_906 = 0x0000;
break;
case DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD:
reg_903 = 0x0000; reg_904 = 0x8000; reg_905 = 0x010b; reg_906 = 0x0000;
break;
case DIB7000M_POWER_NO:
break;
}
/* always power down unused parts */
if (!state->cfg.mobile_mode)
reg_904 |= (1 << 7) | (1 << 6) | (1 << 4) | (1 << 2) | (1 << 1);
/* P_sdio_select_clk = 0 on MC */
if (state->revision != 0x4000)
reg_906 <<= 1;
dib7000m_write_word(state, 903, reg_903);
dib7000m_write_word(state, 904, reg_904);
dib7000m_write_word(state, 905, reg_905);
dib7000m_write_word(state, 906, reg_906);
return 0;
}
static int dib7000m_set_adc_state(struct dib7000m_state *state, enum dibx000_adc_states no)
{
int ret = 0;
u16 reg_913 = dib7000m_read_word(state, 913),
reg_914 = dib7000m_read_word(state, 914);
switch (no) {
case DIBX000_SLOW_ADC_ON:
reg_914 |= (1 << 1) | (1 << 0);
ret |= dib7000m_write_word(state, 914, reg_914);
reg_914 &= ~(1 << 1);
break;
case DIBX000_SLOW_ADC_OFF:
reg_914 |= (1 << 1) | (1 << 0);
break;
case DIBX000_ADC_ON:
if (state->revision == 0x4000) { // workaround for PA/MA
// power-up ADC
dib7000m_write_word(state, 913, 0);
dib7000m_write_word(state, 914, reg_914 & 0x3);
// power-down bandgag
dib7000m_write_word(state, 913, (1 << 15));
dib7000m_write_word(state, 914, reg_914 & 0x3);
}
reg_913 &= 0x0fff;
reg_914 &= 0x0003;
break;
case DIBX000_ADC_OFF: // leave the VBG voltage on
reg_913 |= (1 << 14) | (1 << 13) | (1 << 12);
reg_914 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2);
break;
case DIBX000_VBG_ENABLE:
reg_913 &= ~(1 << 15);
break;
case DIBX000_VBG_DISABLE:
reg_913 |= (1 << 15);
break;
default:
break;
}
// dprintk("-D- 913: %x, 914: %x\n", reg_913, reg_914);
ret |= dib7000m_write_word(state, 913, reg_913);
ret |= dib7000m_write_word(state, 914, reg_914);
return ret;
}
static int dib7000m_set_bandwidth(struct dvb_frontend *demod, u8 bw_idx)
{
struct dib7000m_state *state = demod->demodulator_priv;
u32 timf;
// store the current bandwidth for later use
state->current_bandwidth = bw_idx;
if (state->timf == 0) {
dprintk("-D- Using default timf\n");
timf = state->cfg.bw->timf;
} else {
dprintk("-D- Using updated timf\n");
timf = state->timf;
}
timf = timf * (BW_INDEX_TO_KHZ(bw_idx) / 100) / 80;
dib7000m_write_word(state, 23, (timf >> 16) & 0xffff);
dib7000m_write_word(state, 24, (timf ) & 0xffff);
return 0;
}
static int dib7000m_sad_calib(struct dib7000m_state *state)
{
/* internal */
// dib7000m_write_word(state, 928, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is written in set_bandwidth
dib7000m_write_word(state, 929, (0 << 1) | (0 << 0));
dib7000m_write_word(state, 930, 776); // 0.625*3.3 / 4096
/* do the calibration */
dib7000m_write_word(state, 929, (1 << 0));
dib7000m_write_word(state, 929, (0 << 0));
msleep(1);
return 0;
}
static void dib7000m_reset_pll_common(struct dib7000m_state *state, const struct dibx000_bandwidth_config *bw)
{
dib7000m_write_word(state, 18, ((bw->internal*1000) >> 16) & 0xffff);
dib7000m_write_word(state, 19, (bw->internal*1000) & 0xffff);
dib7000m_write_word(state, 21, (bw->ifreq >> 16) & 0xffff);
dib7000m_write_word(state, 22, bw->ifreq & 0xffff);
dib7000m_write_word(state, 928, bw->sad_cfg);
}
static void dib7000m_reset_pll(struct dib7000m_state *state)
{
const struct dibx000_bandwidth_config *bw = state->cfg.bw;
u16 reg_907,reg_910;
/* default */
reg_907 = (bw->pll_bypass << 15) | (bw->modulo << 7) |
(bw->ADClkSrc << 6) | (bw->IO_CLK_en_core << 5) | (bw->bypclk_div << 2) |
(bw->enable_refdiv << 1) | (0 << 0);
reg_910 = (((bw->pll_ratio >> 6) & 0x3) << 3) | (bw->pll_range << 1) | bw->pll_reset;
// for this oscillator frequency should be 30 MHz for the Master (default values in the board_parameters give that value)
// this is only working only for 30 MHz crystals
if (!state->cfg.quartz_direct) {
reg_910 |= (1 << 5); // forcing the predivider to 1
// if the previous front-end is baseband, its output frequency is 15 MHz (prev freq divided by 2)
if(state->cfg.input_clk_is_div_2)
reg_907 |= (16 << 9);
else // otherwise the previous front-end puts out its input (default 30MHz) - no extra division necessary
reg_907 |= (8 << 9);
} else {
reg_907 |= (bw->pll_ratio & 0x3f) << 9;
reg_910 |= (bw->pll_prediv << 5);
}
dib7000m_write_word(state, 910, reg_910); // pll cfg
dib7000m_write_word(state, 907, reg_907); // clk cfg0
dib7000m_write_word(state, 908, 0x0006); // clk_cfg1
dib7000m_reset_pll_common(state, bw);
}
static void dib7000mc_reset_pll(struct dib7000m_state *state)
{
const struct dibx000_bandwidth_config *bw = state->cfg.bw;
// clk_cfg0
dib7000m_write_word(state, 907, (bw->pll_prediv << 8) | (bw->pll_ratio << 0));
// clk_cfg1
//dib7000m_write_word(state, 908, (1 << 14) | (3 << 12) |(0 << 11) |
dib7000m_write_word(state, 908, (0 << 14) | (3 << 12) |(0 << 11) |
(bw->IO_CLK_en_core << 10) | (bw->bypclk_div << 5) | (bw->enable_refdiv << 4) |
(bw->pll_bypass << 3) | (bw->pll_range << 1) | (bw->pll_reset << 0));
// smpl_cfg
dib7000m_write_word(state, 910, (1 << 12) | (2 << 10) | (bw->modulo << 8) | (bw->ADClkSrc << 7));
dib7000m_reset_pll_common(state, bw);
}
static int dib7000m_reset_gpio(struct dib7000m_state *st)
{
/* reset the GPIOs */
dprintk("-D- gpio dir: %x: gpio val: %x, gpio pwm pos: %x\n",
st->cfg.gpio_dir, st->cfg.gpio_val,st->cfg.gpio_pwm_pos);
dib7000m_write_word(st, 773, st->cfg.gpio_dir);
dib7000m_write_word(st, 774, st->cfg.gpio_val);
/* TODO 782 is P_gpio_od */
dib7000m_write_word(st, 775, st->cfg.gpio_pwm_pos);
dib7000m_write_word(st, 780, st->cfg.pwm_freq_div);
return 0;
}
static int dib7000m_demod_reset(struct dib7000m_state *state)
{
dib7000m_set_power_mode(state, DIB7000M_POWER_ALL);
/* always leave the VBG voltage on - it consumes almost nothing but takes a long time to start */
dib7000m_set_adc_state(state, DIBX000_VBG_ENABLE);
/* restart all parts */
dib7000m_write_word(state, 898, 0xffff);
dib7000m_write_word(state, 899, 0xffff);
dib7000m_write_word(state, 900, 0xff0f);
dib7000m_write_word(state, 901, 0xfffc);
dib7000m_write_word(state, 898, 0);
dib7000m_write_word(state, 899, 0);
dib7000m_write_word(state, 900, 0);
dib7000m_write_word(state, 901, 0);
if (state->revision == 0x4000)
dib7000m_reset_pll(state);
else
dib7000mc_reset_pll(state);
if (dib7000m_reset_gpio(state) != 0)
dprintk("-E- GPIO reset was not successful.\n");
if (dib7000m_set_output_mode(state, OUTMODE_HIGH_Z) != 0)
dprintk("-E- OUTPUT_MODE could not be resetted.\n");
/* unforce divstr regardless whether i2c enumeration was done or not */
dib7000m_write_word(state, 1794, dib7000m_read_word(state, 1794) & ~(1 << 1) );
dib7000m_set_bandwidth(&state->demod, BANDWIDTH_8_MHZ);
dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_ON);
dib7000m_sad_calib(state);
dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_OFF);
dib7000m_set_power_mode(state, DIB7000M_POWER_INTERFACE_ONLY);
return 0;
}
static void dib7000m_restart_agc(struct dib7000m_state *state)
{
// P_restart_iqc & P_restart_agc
dib7000m_write_word(state, 898, 0x0c00);
dib7000m_write_word(state, 898, 0x0000);
}
static int dib7000m_agc_soft_split(struct dib7000m_state *state)
{
u16 agc,split_offset;
if(!state->current_agc || !state->current_agc->perform_agc_softsplit || state->current_agc->split.max == 0)
return 0;
// n_agc_global
agc = dib7000m_read_word(state, 390);
if (agc > state->current_agc->split.min_thres)
split_offset = state->current_agc->split.min;
else if (agc < state->current_agc->split.max_thres)
split_offset = state->current_agc->split.max;
else
split_offset = state->current_agc->split.max *
(agc - state->current_agc->split.min_thres) /
(state->current_agc->split.max_thres - state->current_agc->split.min_thres);
dprintk("AGC split_offset: %d\n",split_offset);
// P_agc_force_split and P_agc_split_offset
return dib7000m_write_word(state, 103, (dib7000m_read_word(state, 103) & 0xff00) | split_offset);
}
static int dib7000m_update_lna(struct dib7000m_state *state)
{
int i;
u16 dyn_gain;
// when there is no LNA to program return immediatly
if (state->cfg.update_lna == NULL)
return 0;
msleep(60);
for (i = 0; i < 20; i++) {
// read dyn_gain here (because it is demod-dependent and not tuner)
dyn_gain = dib7000m_read_word(state, 390);
dprintk("agc global: %d\n", dyn_gain);
if (state->cfg.update_lna(&state->demod,dyn_gain)) { // LNA has changed
dib7000m_restart_agc(state);
msleep(60);
} else
break;
}
return 0;
}
static void dib7000m_set_agc_config(struct dib7000m_state *state, u8 band)
{
struct dibx000_agc_config *agc = NULL;
int i;
if (state->current_band == band)
return;
state->current_band = band;
for (i = 0; i < state->cfg.agc_config_count; i++)
if (state->cfg.agc[i].band_caps & band) {
agc = &state->cfg.agc[i];
break;
}
if (agc == NULL) {
dprintk("-E- No valid AGC configuration found for band 0x%02x\n",band);
return;
}
state->current_agc = agc;
/* AGC */
dib7000m_write_word(state, 72 , agc->setup);
dib7000m_write_word(state, 73 , agc->inv_gain);
dib7000m_write_word(state, 74 , agc->time_stabiliz);
dib7000m_write_word(state, 97 , (agc->alpha_level << 12) | agc->thlock);
// Demod AGC loop configuration
dib7000m_write_word(state, 98, (agc->alpha_mant << 5) | agc->alpha_exp);
dib7000m_write_word(state, 99, (agc->beta_mant << 6) | agc->beta_exp);
dprintk("-D- WBD: ref: %d, sel: %d, active: %d, alpha: %d\n",
state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);
/* AGC continued */
if (state->wbd_ref != 0)
dib7000m_write_word(state, 102, state->wbd_ref);
else // use default
dib7000m_write_word(state, 102, agc->wbd_ref);
dib7000m_write_word(state, 103, (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8) );
dib7000m_write_word(state, 104, agc->agc1_max);
dib7000m_write_word(state, 105, agc->agc1_min);
dib7000m_write_word(state, 106, agc->agc2_max);
dib7000m_write_word(state, 107, agc->agc2_min);
dib7000m_write_word(state, 108, (agc->agc1_pt1 << 8) | agc->agc1_pt2 );
dib7000m_write_word(state, 109, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
dib7000m_write_word(state, 110, (agc->agc2_pt1 << 8) | agc->agc2_pt2);
dib7000m_write_word(state, 111, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
if (state->revision > 0x4000) { // settings for the MC
dib7000m_write_word(state, 71, agc->agc1_pt3);
// dprintk("-D- 929: %x %d %d\n",
// (dib7000m_read_word(state, 929) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2), agc->wbd_inv, agc->wbd_sel);
dib7000m_write_word(state, 929, (dib7000m_read_word(state, 929) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2));
} else {
// wrong default values
u16 b[9] = { 676, 696, 717, 737, 758, 778, 799, 819, 840 };
for (i = 0; i < 9; i++)
dib7000m_write_word(state, 88 + i, b[i]);
}
}
static void dib7000m_update_timf_freq(struct dib7000m_state *state)
{
u32 timf = (dib7000m_read_word(state, 436) << 16) | dib7000m_read_word(state, 437);
state->timf = timf * 80 / (BW_INDEX_TO_KHZ(state->current_bandwidth) / 100);
dib7000m_write_word(state, 23, (u16) (timf >> 16));
dib7000m_write_word(state, 24, (u16) (timf & 0xffff));
dprintk("-D- Updated timf_frequency: %d (default: %d)\n",state->timf, state->cfg.bw->timf);
}
static void dib7000m_set_channel(struct dib7000m_state *state, struct dibx000_ofdm_channel *ch, u8 seq)
{
u16 value, est[4];
dib7000m_set_agc_config(state, BAND_OF_FREQUENCY(ch->RF_kHz));
/* nfft, guard, qam, alpha */
dib7000m_write_word(state, 0, (ch->nfft << 7) | (ch->guard << 5) | (ch->nqam << 3) | (ch->vit_alpha));
dib7000m_write_word(state, 5, (seq << 4));
/* P_dintl_native, P_dintlv_inv, P_vit_hrch, P_vit_code_rate, P_vit_select_hp */
value = (ch->intlv_native << 6) | (ch->vit_hrch << 4) | (ch->vit_select_hp & 0x1);
if (ch->vit_hrch == 0 || ch->vit_select_hp == 1)
value |= (ch->vit_code_rate_hp << 1);
else
value |= (ch->vit_code_rate_lp << 1);
dib7000m_write_word(state, 267 + state->reg_offs, value);
/* offset loop parameters */
/* P_timf_alpha = 6, P_corm_alpha=6, P_corm_thres=0x80 */
dib7000m_write_word(state, 26, (6 << 12) | (6 << 8) | 0x80);
/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=1, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
dib7000m_write_word(state, 29, (0 << 14) | (4 << 10) | (1 << 9) | (3 << 5) | (1 << 4) | (0x3));
/* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max=3 */
dib7000m_write_word(state, 32, (0 << 4) | 0x3);
/* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step=5 */
dib7000m_write_word(state, 33, (0 << 4) | 0x5);
/* P_dvsy_sync_wait */
switch (ch->nfft) {
case 1: value = 256; break;
case 2: value = 128; break;
case 0:
default: value = 64; break;
}
value *= ((1 << (ch->guard)) * 3 / 2); // add 50% SFN margin
value <<= 4;
/* deactive the possibility of diversity reception if extended interleave - not for 7000MC */
/* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */
if (ch->intlv_native || state->revision > 0x4000)
value |= (1 << 2) | (2 << 0);
else
value |= 0;
dib7000m_write_word(state, 266 + state->reg_offs, value);
/* channel estimation fine configuration */
switch (ch->nqam) {
case 2:
est[0] = 0x0148; /* P_adp_regul_cnt 0.04 */
est[1] = 0xfff0; /* P_adp_noise_cnt -0.002 */
est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */
est[3] = 0xfff8; /* P_adp_noise_ext -0.001 */
break;
case 1:
est[0] = 0x023d; /* P_adp_regul_cnt 0.07 */
est[1] = 0xffdf; /* P_adp_noise_cnt -0.004 */
est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */
est[3] = 0xfff0; /* P_adp_noise_ext -0.002 */
break;
default:
est[0] = 0x099a; /* P_adp_regul_cnt 0.3 */
est[1] = 0xffae; /* P_adp_noise_cnt -0.01 */
est[2] = 0x0333; /* P_adp_regul_ext 0.1 */
est[3] = 0xfff8; /* P_adp_noise_ext -0.002 */
break;
}
for (value = 0; value < 4; value++)
dib7000m_write_word(state, 214 + value + state->reg_offs, est[value]);
// set power-up level: interf+analog+AGC
dib7000m_set_power_mode(state, DIB7000M_POWER_INTERF_ANALOG_AGC);
dib7000m_set_adc_state(state, DIBX000_ADC_ON);
msleep(7);
//AGC initialization
if (state->cfg.agc_control)
state->cfg.agc_control(&state->demod, 1);
dib7000m_restart_agc(state);
// wait AGC rough lock time
msleep(5);
dib7000m_update_lna(state);
dib7000m_agc_soft_split(state);
// wait AGC accurate lock time
msleep(7);
if (state->cfg.agc_control)
state->cfg.agc_control(&state->demod, 0);
// set power-up level: autosearch
dib7000m_set_power_mode(state, DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD);
}
static int dib7000m_autosearch_start(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
{
struct dib7000m_state *state = demod->demodulator_priv;
struct dibx000_ofdm_channel auto_ch;
int ret = 0;
u32 value;
INIT_OFDM_CHANNEL(&auto_ch);
auto_ch.RF_kHz = ch->RF_kHz;
auto_ch.Bw = ch->Bw;
auto_ch.nqam = 2;
auto_ch.guard = 0;
auto_ch.nfft = 1;
auto_ch.vit_alpha = 1;
auto_ch.vit_select_hp = 1;
auto_ch.vit_code_rate_hp = 2;
auto_ch.vit_code_rate_lp = 3;
auto_ch.vit_hrch = 0;
auto_ch.intlv_native = 1;
dib7000m_set_channel(state, &auto_ch, 7);
// always use the setting for 8MHz here lock_time for 7,6 MHz are longer
value = 30 * state->cfg.bw->internal;
ret |= dib7000m_write_word(state, 6, (u16) ((value >> 16) & 0xffff)); // lock0 wait time
ret |= dib7000m_write_word(state, 7, (u16) (value & 0xffff)); // lock0 wait time
value = 100 * state->cfg.bw->internal;
ret |= dib7000m_write_word(state, 8, (u16) ((value >> 16) & 0xffff)); // lock1 wait time
ret |= dib7000m_write_word(state, 9, (u16) (value & 0xffff)); // lock1 wait time
value = 500 * state->cfg.bw->internal;
ret |= dib7000m_write_word(state, 10, (u16) ((value >> 16) & 0xffff)); // lock2 wait time
ret |= dib7000m_write_word(state, 11, (u16) (value & 0xffff)); // lock2 wait time
// start search
value = dib7000m_read_word(state, 0);
ret |= dib7000m_write_word(state, 0, value | (1 << 9));
/* clear n_irq_pending */
if (state->revision == 0x4000)
dib7000m_write_word(state, 1793, 0);
else
dib7000m_read_word(state, 537);
ret |= dib7000m_write_word(state, 0, (u16) value);
return ret;
}
static int dib7000m_autosearch_irq(struct dib7000m_state *state, u16 reg)
{
u16 irq_pending = dib7000m_read_word(state, reg);
if (irq_pending & 0x1) { // failed
dprintk("#\n");
return 1;
}
if (irq_pending & 0x2) { // succeeded
dprintk("!\n");
return 2;
}
return 0; // still pending
}
static int dib7000m_autosearch_is_irq(struct dvb_frontend *demod)
{
struct dib7000m_state *state = demod->demodulator_priv;
if (state->revision == 0x4000)
return dib7000m_autosearch_irq(state, 1793);
else
return dib7000m_autosearch_irq(state, 537);
}
static int dib7000m_tune(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
{
struct dib7000m_state *state = demod->demodulator_priv;
int ret = 0;
u16 value;
// we are already tuned - just resuming from suspend
if (ch != NULL)
dib7000m_set_channel(state, ch, 0);
else
return -EINVAL;
// restart demod
ret |= dib7000m_write_word(state, 898, 0x4000);
ret |= dib7000m_write_word(state, 898, 0x0000);
msleep(45);
ret |= dib7000m_set_power_mode(state, DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD);
/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
ret |= dib7000m_write_word(state, 29, (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3));
// never achieved a lock with that bandwidth so far - wait for timfreq to update
if (state->timf == 0)
msleep(200);
//dump_reg(state);
/* P_timf_alpha, P_corm_alpha=6, P_corm_thres=0x80 */
value = (6 << 8) | 0x80;
switch (ch->nfft) {
case 0: value |= (7 << 12); break;
case 1: value |= (9 << 12); break;
case 2: value |= (8 << 12); break;
}
ret |= dib7000m_write_word(state, 26, value);
/* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max */
value = (0 << 4);
switch (ch->nfft) {
case 0: value |= 0x6; break;
case 1: value |= 0x8; break;
case 2: value |= 0x7; break;
}
ret |= dib7000m_write_word(state, 32, value);
/* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step */
value = (0 << 4);
switch (ch->nfft) {
case 0: value |= 0x6; break;
case 1: value |= 0x8; break;
case 2: value |= 0x7; break;
}
ret |= dib7000m_write_word(state, 33, value);
// we achieved a lock - it's time to update the osc freq
if ((dib7000m_read_word(state, 535) >> 6) & 0x1)
dib7000m_update_timf_freq(state);
return ret;
}
static int dib7000m_init(struct dvb_frontend *demod)
{
struct dib7000m_state *state = demod->demodulator_priv;
int ret = 0;
u8 o = state->reg_offs;
dib7000m_set_power_mode(state, DIB7000M_POWER_ALL);
if (dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0)
dprintk("-E- could not start Slow ADC\n");
if (state->cfg.dvbt_mode)
dib7000m_write_word(state, 1796, 0x0); // select DVB-T output
if (state->cfg.mobile_mode)
ret |= dib7000m_write_word(state, 261 + o, 2);
else
ret |= dib7000m_write_word(state, 224 + o, 1);
ret |= dib7000m_write_word(state, 173 + o, 0);
ret |= dib7000m_write_word(state, 174 + o, 0);
ret |= dib7000m_write_word(state, 175 + o, 0);
ret |= dib7000m_write_word(state, 176 + o, 0);
ret |= dib7000m_write_word(state, 177 + o, 0);
ret |= dib7000m_write_word(state, 178 + o, 0);
ret |= dib7000m_write_word(state, 179 + o, 0);
ret |= dib7000m_write_word(state, 180 + o, 0);
// P_corm_thres Lock algorithms configuration
ret |= dib7000m_write_word(state, 26, 0x6680);
// P_palf_alpha_regul, P_palf_filter_freeze, P_palf_filter_on
ret |= dib7000m_write_word(state, 170 + o, 0x0410);
// P_fft_nb_to_cut
ret |= dib7000m_write_word(state, 182 + o, 8192);
// P_pha3_thres
ret |= dib7000m_write_word(state, 195 + o, 0x0ccd);
// P_cti_use_cpe, P_cti_use_prog
ret |= dib7000m_write_word(state, 196 + o, 0);
// P_cspu_regul, P_cspu_win_cut
ret |= dib7000m_write_word(state, 205 + o, 0x200f);
// P_adp_regul_cnt
ret |= dib7000m_write_word(state, 214 + o, 0x023d);
// P_adp_noise_cnt
ret |= dib7000m_write_word(state, 215 + o, 0x00a4);
// P_adp_regul_ext
ret |= dib7000m_write_word(state, 216 + o, 0x00a4);
// P_adp_noise_ext
ret |= dib7000m_write_word(state, 217 + o, 0x7ff0);
// P_adp_fil
ret |= dib7000m_write_word(state, 218 + o, 0x3ccc);
// P_2d_byp_ti_num
ret |= dib7000m_write_word(state, 226 + o, 0);
// P_fec_*
ret |= dib7000m_write_word(state, 281 + o, 0x0010);
// P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard
ret |= dib7000m_write_word(state, 294 + o,0x0062);
// P_iqc_alpha_pha, P_iqc_alpha_amp, P_iqc_dcc_alpha, ...
if(state->cfg.tuner_is_baseband)
ret |= dib7000m_write_word(state, 36, 0x0755);
else
ret |= dib7000m_write_word(state, 36, 0x1f55);
// auto search configuration
ret |= dib7000m_write_word(state, 2, 0x0004);
ret |= dib7000m_write_word(state, 3, 0x1000);
ret |= dib7000m_write_word(state, 4, 0x0814);
ret |= dib7000m_write_word(state, 6, 0x001b);
ret |= dib7000m_write_word(state, 7, 0x7740);
ret |= dib7000m_write_word(state, 8, 0x005b);
ret |= dib7000m_write_word(state, 9, 0x8d80);
ret |= dib7000m_write_word(state, 10, 0x01c9);
ret |= dib7000m_write_word(state, 11, 0xc380);
ret |= dib7000m_write_word(state, 12, 0x0000);
ret |= dib7000m_write_word(state, 13, 0x0080);
ret |= dib7000m_write_word(state, 14, 0x0000);
ret |= dib7000m_write_word(state, 15, 0x0090);
ret |= dib7000m_write_word(state, 16, 0x0001);
ret |= dib7000m_write_word(state, 17, 0xd4c0);
ret |= dib7000m_write_word(state, 263 + o,0x0001);
// P_divclksel=3 P_divbitsel=1
if (state->revision == 0x4000)
dib7000m_write_word(state, 909, (3 << 10) | (1 << 6));
else
dib7000m_write_word(state, 909, (3 << 4) | 1);
// Tuner IO bank: max drive (14mA)
ret |= dib7000m_write_word(state, 912 ,0x2c8a);
ret |= dib7000m_write_word(state, 1817, 1);
return ret;
}
static int dib7000m_sleep(struct dvb_frontend *demod)
{
struct dib7000m_state *st = demod->demodulator_priv;
dib7000m_set_output_mode(st, OUTMODE_HIGH_Z);
return dib7000m_set_power_mode(st, DIB7000M_POWER_INTERFACE_ONLY) |
dib7000m_set_adc_state(st, DIBX000_SLOW_ADC_OFF) |
dib7000m_set_adc_state(st, DIBX000_ADC_OFF);
}
static int dib7000m_identify(struct dib7000m_state *state)
{
u16 value;
if ((value = dib7000m_read_word(state, 896)) != 0x01b3) {
dprintk("-E- DiB7000M: wrong Vendor ID (read=0x%x)\n",value);
return -EREMOTEIO;
}
state->revision = dib7000m_read_word(state, 897);
if (state->revision != 0x4000 &&
state->revision != 0x4001 &&
state->revision != 0x4002) {
dprintk("-E- DiB7000M: wrong Device ID (%x)\n",value);
return -EREMOTEIO;
}
/* protect this driver to be used with 7000PC */
if (state->revision == 0x4000 && dib7000m_read_word(state, 769) == 0x4000) {
dprintk("-E- DiB7000M: this driver does not work with DiB7000PC\n");
return -EREMOTEIO;
}
switch (state->revision) {
case 0x4000: dprintk("-I- found DiB7000MA/PA/MB/PB\n"); break;
case 0x4001: state->reg_offs = 1; dprintk("-I- found DiB7000HC\n"); break;
case 0x4002: state->reg_offs = 1; dprintk("-I- found DiB7000MC\n"); break;
}
return 0;
}
static int dib7000m_get_frontend(struct dvb_frontend* fe,
struct dvb_frontend_parameters *fep)
{
struct dib7000m_state *state = fe->demodulator_priv;
u16 tps = dib7000m_read_word(state,480);
fep->inversion = INVERSION_AUTO;
fep->u.ofdm.bandwidth = state->current_bandwidth;
switch ((tps >> 8) & 0x3) {
case 0: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K; break;
case 1: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K; break;
/* case 2: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_4K; break; */
}
switch (tps & 0x3) {
case 0: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_32; break;
case 1: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_16; break;
case 2: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_8; break;
case 3: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_4; break;
}
switch ((tps >> 14) & 0x3) {
case 0: fep->u.ofdm.constellation = QPSK; break;
case 1: fep->u.ofdm.constellation = QAM_16; break;
case 2:
default: fep->u.ofdm.constellation = QAM_64; break;
}
/* as long as the frontend_param structure is fixed for hierarchical transmission I refuse to use it */
/* (tps >> 13) & 0x1 == hrch is used, (tps >> 10) & 0x7 == alpha */
fep->u.ofdm.hierarchy_information = HIERARCHY_NONE;
switch ((tps >> 5) & 0x7) {
case 1: fep->u.ofdm.code_rate_HP = FEC_1_2; break;
case 2: fep->u.ofdm.code_rate_HP = FEC_2_3; break;
case 3: fep->u.ofdm.code_rate_HP = FEC_3_4; break;
case 5: fep->u.ofdm.code_rate_HP = FEC_5_6; break;
case 7:
default: fep->u.ofdm.code_rate_HP = FEC_7_8; break;
}
switch ((tps >> 2) & 0x7) {
case 1: fep->u.ofdm.code_rate_LP = FEC_1_2; break;
case 2: fep->u.ofdm.code_rate_LP = FEC_2_3; break;
case 3: fep->u.ofdm.code_rate_LP = FEC_3_4; break;
case 5: fep->u.ofdm.code_rate_LP = FEC_5_6; break;
case 7:
default: fep->u.ofdm.code_rate_LP = FEC_7_8; break;
}
/* native interleaver: (dib7000m_read_word(state, 481) >> 5) & 0x1 */
return 0;
}
static int dib7000m_set_frontend(struct dvb_frontend* fe,
struct dvb_frontend_parameters *fep)
{
struct dib7000m_state *state = fe->demodulator_priv;
struct dibx000_ofdm_channel ch;
INIT_OFDM_CHANNEL(&ch);
FEP2DIB(fep,&ch);
state->current_bandwidth = fep->u.ofdm.bandwidth;
dib7000m_set_bandwidth(fe, fep->u.ofdm.bandwidth);
if (fe->ops.tuner_ops.set_params)
fe->ops.tuner_ops.set_params(fe, fep);
if (fep->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO ||
fep->u.ofdm.guard_interval == GUARD_INTERVAL_AUTO ||
fep->u.ofdm.constellation == QAM_AUTO ||
fep->u.ofdm.code_rate_HP == FEC_AUTO) {
int i = 800, found;
dib7000m_autosearch_start(fe, &ch);
do {
msleep(1);
found = dib7000m_autosearch_is_irq(fe);
} while (found == 0 && i--);
dprintk("autosearch returns: %d\n",found);
if (found == 0 || found == 1)
return 0; // no channel found
dib7000m_get_frontend(fe, fep);
FEP2DIB(fep, &ch);
}
/* make this a config parameter */
dib7000m_set_output_mode(state, OUTMODE_MPEG2_FIFO);
return dib7000m_tune(fe, &ch);
}
static int dib7000m_read_status(struct dvb_frontend *fe, fe_status_t *stat)
{
struct dib7000m_state *state = fe->demodulator_priv;
u16 lock = dib7000m_read_word(state, 535);
*stat = 0;
if (lock & 0x8000)
*stat |= FE_HAS_SIGNAL;
if (lock & 0x3000)
*stat |= FE_HAS_CARRIER;
if (lock & 0x0100)
*stat |= FE_HAS_VITERBI;
if (lock & 0x0010)
*stat |= FE_HAS_SYNC;
if (lock & 0x0008)
*stat |= FE_HAS_LOCK;
return 0;
}
static int dib7000m_read_ber(struct dvb_frontend *fe, u32 *ber)
{
struct dib7000m_state *state = fe->demodulator_priv;
*ber = (dib7000m_read_word(state, 526) << 16) | dib7000m_read_word(state, 527);
return 0;
}
static int dib7000m_read_unc_blocks(struct dvb_frontend *fe, u32 *unc)
{
struct dib7000m_state *state = fe->demodulator_priv;
*unc = dib7000m_read_word(state, 534);
return 0;
}
static int dib7000m_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
{
struct dib7000m_state *state = fe->demodulator_priv;
u16 val = dib7000m_read_word(state, 390);
*strength = 65535 - val;
return 0;
}
static int dib7000m_read_snr(struct dvb_frontend* fe, u16 *snr)
{
*snr = 0x0000;
return 0;
}
static int dib7000m_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
{
tune->min_delay_ms = 1000;
return 0;
}
static void dib7000m_release(struct dvb_frontend *demod)
{
struct dib7000m_state *st = demod->demodulator_priv;
dibx000_exit_i2c_master(&st->i2c_master);
kfree(st);
}
struct i2c_adapter * dib7000m_get_i2c_master(struct dvb_frontend *demod, enum dibx000_i2c_interface intf, int gating)
{
struct dib7000m_state *st = demod->demodulator_priv;
return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating);
}
EXPORT_SYMBOL(dib7000m_get_i2c_master);
int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000m_config cfg[])
{
struct dib7000m_state st = { .i2c_adap = i2c };
int k = 0;
u8 new_addr = 0;
for (k = no_of_demods-1; k >= 0; k--) {
st.cfg = cfg[k];
/* designated i2c address */
new_addr = (0x40 + k) << 1;
st.i2c_addr = new_addr;
if (dib7000m_identify(&st) != 0) {
st.i2c_addr = default_addr;
if (dib7000m_identify(&st) != 0) {
dprintk("DiB7000M #%d: not identified\n", k);
return -EIO;
}
}
/* start diversity to pull_down div_str - just for i2c-enumeration */
dib7000m_set_output_mode(&st, OUTMODE_DIVERSITY);
dib7000m_write_word(&st, 1796, 0x0); // select DVB-T output
/* set new i2c address and force divstart */
dib7000m_write_word(&st, 1794, (new_addr << 2) | 0x2);
dprintk("IC %d initialized (to i2c_address 0x%x)\n", k, new_addr);
}
for (k = 0; k < no_of_demods; k++) {
st.cfg = cfg[k];
st.i2c_addr = (0x40 + k) << 1;
// unforce divstr
dib7000m_write_word(&st,1794, st.i2c_addr << 2);
/* deactivate div - it was just for i2c-enumeration */
dib7000m_set_output_mode(&st, OUTMODE_HIGH_Z);
}
return 0;
}
EXPORT_SYMBOL(dib7000m_i2c_enumeration);
static struct dvb_frontend_ops dib7000m_ops;
struct dvb_frontend * dib7000m_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000m_config *cfg)
{
struct dvb_frontend *demod;
struct dib7000m_state *st;
st = kzalloc(sizeof(struct dib7000m_state), GFP_KERNEL);
if (st == NULL)
return NULL;
memcpy(&st->cfg, cfg, sizeof(struct dib7000m_config));
st->i2c_adap = i2c_adap;
st->i2c_addr = i2c_addr;
demod = &st->demod;
demod->demodulator_priv = st;
memcpy(&st->demod.ops, &dib7000m_ops, sizeof(struct dvb_frontend_ops));
if (dib7000m_identify(st) != 0)
goto error;
if (st->revision == 0x4000)
dibx000_init_i2c_master(&st->i2c_master, DIB7000, st->i2c_adap, st->i2c_addr);
else
dibx000_init_i2c_master(&st->i2c_master, DIB7000MC, st->i2c_adap, st->i2c_addr);
dib7000m_demod_reset(st);
return demod;
error:
kfree(st);
return NULL;
}
EXPORT_SYMBOL(dib7000m_attach);
static struct dvb_frontend_ops dib7000m_ops = {
.info = {
.name = "DiBcom 7000MA/MB/PA/PB/MC",
.type = FE_OFDM,
.frequency_min = 44250000,
.frequency_max = 867250000,
.frequency_stepsize = 62500,
.caps = FE_CAN_INVERSION_AUTO |
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
FE_CAN_TRANSMISSION_MODE_AUTO |
FE_CAN_GUARD_INTERVAL_AUTO |
FE_CAN_RECOVER |
FE_CAN_HIERARCHY_AUTO,
},
.release = dib7000m_release,
.init = dib7000m_init,
.sleep = dib7000m_sleep,
.set_frontend = dib7000m_set_frontend,
.get_tune_settings = dib7000m_fe_get_tune_settings,
.get_frontend = dib7000m_get_frontend,
.read_status = dib7000m_read_status,
.read_ber = dib7000m_read_ber,
.read_signal_strength = dib7000m_read_signal_strength,
.read_snr = dib7000m_read_snr,
.read_ucblocks = dib7000m_read_unc_blocks,
};
MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
MODULE_DESCRIPTION("Driver for the DiBcom 7000MA/MB/PA/PB/MC COFDM demodulator");
MODULE_LICENSE("GPL");