Merge branches 'release', 'bugzilla-12011', 'bugzilla-12632', 'misc' and 'suspend' into release
diff --git a/CREDITS b/CREDITS
index 2b39168..5e07367 100644
--- a/CREDITS
+++ b/CREDITS
@@ -2166,7 +2166,6 @@
N: Pavel Machek
E: pavel@ucw.cz
-E: pavel@suse.cz
D: Softcursor for vga, hypertech cdrom support, vcsa bugfix, nbd
D: sun4/330 port, capabilities for elf, speedup for rm on ext2, USB,
D: work on suspend-to-ram/disk, killing duplicates from ioctl32
diff --git a/Documentation/ABI/testing/sysfs-firmware-memmap b/Documentation/ABI/testing/sysfs-firmware-memmap
index 0d99ee6..eca0d65 100644
--- a/Documentation/ABI/testing/sysfs-firmware-memmap
+++ b/Documentation/ABI/testing/sysfs-firmware-memmap
@@ -1,6 +1,6 @@
What: /sys/firmware/memmap/
Date: June 2008
-Contact: Bernhard Walle <bwalle@suse.de>
+Contact: Bernhard Walle <bernhard.walle@gmx.de>
Description:
On all platforms, the firmware provides a memory map which the
kernel reads. The resources from that memory map are registered
diff --git a/Documentation/PCI/PCIEBUS-HOWTO.txt b/Documentation/PCI/PCIEBUS-HOWTO.txt
index 9a07e38..6bd5f37 100644
--- a/Documentation/PCI/PCIEBUS-HOWTO.txt
+++ b/Documentation/PCI/PCIEBUS-HOWTO.txt
@@ -93,7 +93,7 @@
int pcie_port_service_register(struct pcie_port_service_driver *new)
-This API replaces the Linux Driver Model's pci_module_init API. A
+This API replaces the Linux Driver Model's pci_register_driver API. A
service driver should always calls pcie_port_service_register at
module init. Note that after service driver being loaded, calls
such as pci_enable_device(dev) and pci_set_master(dev) are no longer
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index d9e5d6f..93feb84 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -252,10 +252,8 @@
When a task is moved from one cgroup to another, it gets a new
css_set pointer - if there's an already existing css_set with the
desired collection of cgroups then that group is reused, else a new
-css_set is allocated. Note that the current implementation uses a
-linear search to locate an appropriate existing css_set, so isn't
-very efficient. A future version will use a hash table for better
-performance.
+css_set is allocated. The appropriate existing css_set is located by
+looking into a hash table.
To allow access from a cgroup to the css_sets (and hence tasks)
that comprise it, a set of cg_cgroup_link objects form a lattice;
diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt
index 5c86c25..0611e95 100644
--- a/Documentation/cgroups/cpusets.txt
+++ b/Documentation/cgroups/cpusets.txt
@@ -142,7 +142,7 @@
- in fork and exit, to attach and detach a task from its cpuset.
- in sched_setaffinity, to mask the requested CPUs by what's
allowed in that tasks cpuset.
- - in sched.c migrate_all_tasks(), to keep migrating tasks within
+ - in sched.c migrate_live_tasks(), to keep migrating tasks within
the CPUs allowed by their cpuset, if possible.
- in the mbind and set_mempolicy system calls, to mask the requested
Memory Nodes by what's allowed in that tasks cpuset.
@@ -175,6 +175,10 @@
- mem_exclusive flag: is memory placement exclusive?
- mem_hardwall flag: is memory allocation hardwalled
- memory_pressure: measure of how much paging pressure in cpuset
+ - memory_spread_page flag: if set, spread page cache evenly on allowed nodes
+ - memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes
+ - sched_load_balance flag: if set, load balance within CPUs on that cpuset
+ - sched_relax_domain_level: the searching range when migrating tasks
In addition, the root cpuset only has the following file:
- memory_pressure_enabled flag: compute memory_pressure?
@@ -252,7 +256,7 @@
This is useful both on tightly managed systems running a wide mix of
submitted jobs, which may choose to terminate or re-prioritize jobs that
-are trying to use more memory than allowed on the nodes assigned them,
+are trying to use more memory than allowed on the nodes assigned to them,
and with tightly coupled, long running, massively parallel scientific
computing jobs that will dramatically fail to meet required performance
goals if they start to use more memory than allowed to them.
@@ -378,7 +382,7 @@
The algorithmic cost of load balancing and its impact on key shared
kernel data structures such as the task list increases more than
linearly with the number of CPUs being balanced. So the scheduler
-has support to partition the systems CPUs into a number of sched
+has support to partition the systems CPUs into a number of sched
domains such that it only load balances within each sched domain.
Each sched domain covers some subset of the CPUs in the system;
no two sched domains overlap; some CPUs might not be in any sched
@@ -485,17 +489,22 @@
The internal kernel cpuset to scheduler interface passes from the
cpuset code to the scheduler code a partition of the load balanced
CPUs in the system. This partition is a set of subsets (represented
-as an array of cpumask_t) of CPUs, pairwise disjoint, that cover all
-the CPUs that must be load balanced.
+as an array of struct cpumask) of CPUs, pairwise disjoint, that cover
+all the CPUs that must be load balanced.
-Whenever the 'sched_load_balance' flag changes, or CPUs come or go
-from a cpuset with this flag enabled, or a cpuset with this flag
-enabled is removed, the cpuset code builds a new such partition and
-passes it to the scheduler sched domain setup code, to have the sched
-domains rebuilt as necessary.
+The cpuset code builds a new such partition and passes it to the
+scheduler sched domain setup code, to have the sched domains rebuilt
+as necessary, whenever:
+ - the 'sched_load_balance' flag of a cpuset with non-empty CPUs changes,
+ - or CPUs come or go from a cpuset with this flag enabled,
+ - or 'sched_relax_domain_level' value of a cpuset with non-empty CPUs
+ and with this flag enabled changes,
+ - or a cpuset with non-empty CPUs and with this flag enabled is removed,
+ - or a cpu is offlined/onlined.
This partition exactly defines what sched domains the scheduler should
-setup - one sched domain for each element (cpumask_t) in the partition.
+setup - one sched domain for each element (struct cpumask) in the
+partition.
The scheduler remembers the currently active sched domain partitions.
When the scheduler routine partition_sched_domains() is invoked from
@@ -559,7 +568,7 @@
requests 0 and others are -1 then 0 is used.
Note that modifying this file will have both good and bad effects,
-and whether it is acceptable or not will be depend on your situation.
+and whether it is acceptable or not depends on your situation.
Don't modify this file if you are not sure.
If your situation is:
@@ -600,19 +609,15 @@
If a cpuset has its 'cpus' modified, then each task in that cpuset
will have its allowed CPU placement changed immediately. Similarly,
-if a tasks pid is written to a cpusets 'tasks' file, in either its
-current cpuset or another cpuset, then its allowed CPU placement is
-changed immediately. If such a task had been bound to some subset
-of its cpuset using the sched_setaffinity() call, the task will be
-allowed to run on any CPU allowed in its new cpuset, negating the
-affect of the prior sched_setaffinity() call.
+if a tasks pid is written to another cpusets 'tasks' file, then its
+allowed CPU placement is changed immediately. If such a task had been
+bound to some subset of its cpuset using the sched_setaffinity() call,
+the task will be allowed to run on any CPU allowed in its new cpuset,
+negating the effect of the prior sched_setaffinity() call.
In summary, the memory placement of a task whose cpuset is changed is
updated by the kernel, on the next allocation of a page for that task,
-but the processor placement is not updated, until that tasks pid is
-rewritten to the 'tasks' file of its cpuset. This is done to avoid
-impacting the scheduler code in the kernel with a check for changes
-in a tasks processor placement.
+and the processor placement is updated immediately.
Normally, once a page is allocated (given a physical page
of main memory) then that page stays on whatever node it
@@ -681,10 +686,14 @@
# The next line should display '/Charlie'
cat /proc/self/cpuset
-In the future, a C library interface to cpusets will likely be
-available. For now, the only way to query or modify cpusets is
-via the cpuset file system, using the various cd, mkdir, echo, cat,
-rmdir commands from the shell, or their equivalent from C.
+There are ways to query or modify cpusets:
+ - via the cpuset file system directly, using the various cd, mkdir, echo,
+ cat, rmdir commands from the shell, or their equivalent from C.
+ - via the C library libcpuset.
+ - via the C library libcgroup.
+ (http://sourceforge.net/proects/libcg/)
+ - via the python application cset.
+ (http://developer.novell.com/wiki/index.php/Cpuset)
The sched_setaffinity calls can also be done at the shell prompt using
SGI's runon or Robert Love's taskset. The mbind and set_mempolicy
@@ -756,7 +765,7 @@
is equivalent to
-mount -t cgroup -ocpuset X /dev/cpuset
+mount -t cgroup -ocpuset,noprefix X /dev/cpuset
echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent
2.2 Adding/removing cpus
diff --git a/Documentation/hwmon/hpfall.c b/Documentation/hwmon/hpfall.c
new file mode 100644
index 0000000..bbea1cc
--- /dev/null
+++ b/Documentation/hwmon/hpfall.c
@@ -0,0 +1,101 @@
+/* Disk protection for HP machines.
+ *
+ * Copyright 2008 Eric Piel
+ * Copyright 2009 Pavel Machek <pavel@suse.cz>
+ *
+ * GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <signal.h>
+
+void write_int(char *path, int i)
+{
+ char buf[1024];
+ int fd = open(path, O_RDWR);
+ if (fd < 0) {
+ perror("open");
+ exit(1);
+ }
+ sprintf(buf, "%d", i);
+ if (write(fd, buf, strlen(buf)) != strlen(buf)) {
+ perror("write");
+ exit(1);
+ }
+ close(fd);
+}
+
+void set_led(int on)
+{
+ write_int("/sys/class/leds/hp::hddprotect/brightness", on);
+}
+
+void protect(int seconds)
+{
+ write_int("/sys/block/sda/device/unload_heads", seconds*1000);
+}
+
+int on_ac(void)
+{
+// /sys/class/power_supply/AC0/online
+}
+
+int lid_open(void)
+{
+// /proc/acpi/button/lid/LID/state
+}
+
+void ignore_me(void)
+{
+ protect(0);
+ set_led(0);
+
+}
+
+int main(int argc, char* argv[])
+{
+ int fd, ret;
+
+ fd = open("/dev/freefall", O_RDONLY);
+ if (fd < 0) {
+ perror("open");
+ return EXIT_FAILURE;
+ }
+
+ signal(SIGALRM, ignore_me);
+
+ for (;;) {
+ unsigned char count;
+
+ ret = read(fd, &count, sizeof(count));
+ alarm(0);
+ if ((ret == -1) && (errno == EINTR)) {
+ /* Alarm expired, time to unpark the heads */
+ continue;
+ }
+
+ if (ret != sizeof(count)) {
+ perror("read");
+ break;
+ }
+
+ protect(21);
+ set_led(1);
+ if (1 || on_ac() || lid_open()) {
+ alarm(2);
+ } else {
+ alarm(20);
+ }
+ }
+
+ close(fd);
+ return EXIT_SUCCESS;
+}
diff --git a/Documentation/hwmon/lis3lv02d b/Documentation/hwmon/lis3lv02d
index 0fcfc4a..287f8c9 100644
--- a/Documentation/hwmon/lis3lv02d
+++ b/Documentation/hwmon/lis3lv02d
@@ -33,6 +33,14 @@
This driver also provides an absolute input class device, allowing
the laptop to act as a pinball machine-esque joystick.
+Another feature of the driver is misc device called "freefall" that
+acts similar to /dev/rtc and reacts on free-fall interrupts received
+from the device. It supports blocking operations, poll/select and
+fasync operation modes. You must read 1 bytes from the device. The
+result is number of free-fall interrupts since the last successful
+read (or 255 if number of interrupts would not fit).
+
+
Axes orientation
----------------
diff --git a/Documentation/tracers/mmiotrace.txt b/Documentation/tracers/mmiotrace.txt
index cde23b4..5731c67 100644
--- a/Documentation/tracers/mmiotrace.txt
+++ b/Documentation/tracers/mmiotrace.txt
@@ -78,12 +78,10 @@
events were lost, the trace is incomplete. You should enlarge the buffers and
try again. Buffers are enlarged by first seeing how large the current buffers
are:
-$ cat /debug/tracing/trace_entries
+$ cat /debug/tracing/buffer_size_kb
gives you a number. Approximately double this number and write it back, for
instance:
-$ echo 0 > /debug/tracing/tracing_enabled
-$ echo 128000 > /debug/tracing/trace_entries
-$ echo 1 > /debug/tracing/tracing_enabled
+$ echo 128000 > /debug/tracing/buffer_size_kb
Then start again from the top.
If you are doing a trace for a driver project, e.g. Nouveau, you should also
diff --git a/MAINTAINERS b/MAINTAINERS
index db65b4e..59fd2d1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -692,6 +692,13 @@
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+ARM/NUVOTON W90X900 ARM ARCHITECTURE
+P: Wan ZongShun
+M: mcuos.com@gmail.com
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.mcuos.com
+S: Maintained
+
ARPD SUPPORT
P: Jonathan Layes
L: netdev@vger.kernel.org
@@ -1905,10 +1912,10 @@
S: Maintained
HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
-P: Robert Love
-M: rlove@rlove.org
-M: linux-kernel@vger.kernel.org
-W: http://www.kernel.org/pub/linux/kernel/people/rml/hdaps/
+P: Frank Seidel
+M: frank@f-seidel.de
+L: lm-sensors@lm-sensors.org
+W: http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
S: Maintained
GSPCA FINEPIX SUBDRIVER
@@ -2001,7 +2008,7 @@
HIBERNATION (aka Software Suspend, aka swsusp)
P: Pavel Machek
-M: pavel@suse.cz
+M: pavel@ucw.cz
P: Rafael J. Wysocki
M: rjw@sisk.pl
L: linux-pm@lists.linux-foundation.org
@@ -3327,8 +3334,8 @@
M: jeremy@xensource.com
P: Chris Wright
M: chrisw@sous-sol.org
-P: Zachary Amsden
-M: zach@vmware.com
+P: Alok Kataria
+M: akataria@vmware.com
P: Rusty Russell
M: rusty@rustcorp.com.au
L: virtualization@lists.osdl.org
@@ -4172,7 +4179,7 @@
P: Len Brown
M: len.brown@intel.com
P: Pavel Machek
-M: pavel@suse.cz
+M: pavel@ucw.cz
P: Rafael J. Wysocki
M: rjw@sisk.pl
L: linux-pm@lists.linux-foundation.org
@@ -4924,11 +4931,11 @@
S: Maintained
ZR36067 VIDEO FOR LINUX DRIVER
-P: Ronald Bultje
-M: rbultje@ronald.bitfreak.net
L: mjpeg-users@lists.sourceforge.net
+L: linux-media@vger.kernel.org
W: http://mjpeg.sourceforge.net/driver-zoran/
-S: Maintained
+T: Mercurial http://linuxtv.org/hg/v4l-dvb
+S: Odd Fixes
ZS DECSTATION Z85C30 SERIAL DRIVER
P: Maciej W. Rozycki
diff --git a/Makefile b/Makefile
index 22d7584..59cf6da 100644
--- a/Makefile
+++ b/Makefile
@@ -389,6 +389,7 @@
# output directory.
outputmakefile:
ifneq ($(KBUILD_SRC),)
+ $(Q)ln -fsn $(srctree) source
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
$(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
endif
@@ -946,7 +947,6 @@
mkdir -p include2; \
ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \
fi
- ln -fsn $(srctree) source
endif
# prepare2 creates a makefile if using a separate output directory
diff --git a/README b/README
index 90a0765..d6c6c74 100644
--- a/README
+++ b/README
@@ -188,7 +188,7 @@
values to random values.
You can find more information on using the Linux kernel config tools
- in Documentation/kbuild/make-configs.txt.
+ in Documentation/kbuild/kconfig.txt.
NOTES on "make config":
- having unnecessary drivers will make the kernel bigger, and can
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index f238370..8d0097f 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -93,8 +93,8 @@
if (cpuid != boot_cpuid) {
flags |= 0x00040000UL; /* "remain halted" */
*pflags = flags;
- cpu_clear(cpuid, cpu_present_map);
- cpu_clear(cpuid, cpu_possible_map);
+ set_cpu_present(cpuid, false);
+ set_cpu_possible(cpuid, false);
halt();
}
#endif
@@ -120,8 +120,8 @@
#ifdef CONFIG_SMP
/* Wait for the secondaries to halt. */
- cpu_clear(boot_cpuid, cpu_present_map);
- cpu_clear(boot_cpuid, cpu_possible_map);
+ set_cpu_present(boot_cpuid, false);
+ set_cpu_possible(boot_cpuid, false);
while (cpus_weight(cpu_present_map))
barrier();
#endif
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index 00f1dc3..b1fe567 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -120,12 +120,12 @@
smp_callin(void)
{
int cpuid = hard_smp_processor_id();
- cpumask_t mask = cpu_online_map;
- if (cpu_test_and_set(cpuid, mask)) {
+ if (cpu_online(cpuid)) {
printk("??, cpu 0x%x already present??\n", cpuid);
BUG();
}
+ set_cpu_online(cpuid, true);
/* Turn on machine checks. */
wrmces(7);
@@ -436,8 +436,8 @@
((char *)cpubase + i*hwrpb->processor_size);
if ((cpu->flags & 0x1cc) == 0x1cc) {
smp_num_probed++;
- cpu_set(i, cpu_possible_map);
- cpu_set(i, cpu_present_map);
+ set_cpu_possible(i, true);
+ set_cpu_present(i, true);
cpu->pal_revision = boot_cpu_palrev;
}
@@ -470,8 +470,8 @@
/* Nothing to do on a UP box, or when told not to. */
if (smp_num_probed == 1 || max_cpus == 0) {
- cpu_possible_map = cpumask_of_cpu(boot_cpuid);
- cpu_present_map = cpumask_of_cpu(boot_cpuid);
+ init_cpu_possible(cpumask_of(boot_cpuid));
+ init_cpu_present(cpumask_of(boot_cpuid));
printk(KERN_INFO "SMP mode deactivated.\n");
return;
}
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index e0ee706..98e2f3d 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -608,7 +608,7 @@
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
#
# USB-based Watchdog Cards
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 01d1ef9..1494561 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -700,7 +700,7 @@
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
#
# USB-based Watchdog Cards
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index 036a126..21599f3 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -710,7 +710,7 @@
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
#
# USB-based Watchdog Cards
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index 237a2a6..e2df81a 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -606,7 +606,7 @@
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
#
# Sonics Silicon Backplane
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
index cd1d717..9b32d0e 100644
--- a/arch/arm/configs/qil-a9260_defconfig
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -727,7 +727,7 @@
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_AT91SAM9_WATCHDOG is not set
+# CONFIG_AT91SAM9X_WATCHDOG is not set
#
# USB-based Watchdog Cards
diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c
index 8484909..d4a0da1 100644
--- a/arch/arm/kernel/elf.c
+++ b/arch/arm/kernel/elf.c
@@ -74,9 +74,9 @@
*/
int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
{
- if (executable_stack != EXSTACK_ENABLE_X)
+ if (executable_stack != EXSTACK_DISABLE_X)
return 1;
- if (cpu_architecture() <= CPU_ARCH_ARMv6)
+ if (cpu_architecture() < CPU_ARCH_ARMv6)
return 1;
return 0;
}
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index 9eca220..412aa49 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -697,7 +697,7 @@
* Watchdog
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at91cap9_wdt_device = {
.name = "at91_wdt",
.id = -1,
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index fdde1ea..d74c9ac 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -643,7 +643,7 @@
* Watchdog
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at91sam9260_wdt_device = {
.name = "at91_wdt",
.id = -1,
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 1728975..59fc483 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -621,7 +621,7 @@
* Watchdog
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at91sam9261_wdt_device = {
.name = "at91_wdt",
.id = -1,
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index b753cb8..134af97 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -854,7 +854,7 @@
* Watchdog
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at91sam9263_wdt_device = {
.name = "at91_wdt",
.id = -1,
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 145324f..7281865 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -609,7 +609,7 @@
* Watchdog
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at91sam9rl_wdt_device = {
.name = "at91_wdt",
.id = -1,
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 9b0447c..2f7d497 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -490,7 +490,8 @@
/*--------------------------------------------------------------------------*/
-/* This lock class tells lockdep that GPIO irqs are in a different
+/*
+ * This lock class tells lockdep that GPIO irqs are in a different
* category than their parents, so it won't report false recursion.
*/
static struct lock_class_key gpio_lock_class;
@@ -509,9 +510,6 @@
unsigned id = this->id;
unsigned i;
- /* enable PIO controller's clock */
- clk_enable(this->clock);
-
__raw_writel(~0, this->regbase + PIO_IDR);
for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
@@ -556,7 +554,14 @@
data->chipbase = PIN_BASE + i * 32;
data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
- /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
+ /* enable PIO controller's clock */
+ clk_enable(data->clock);
+
+ /*
+ * Some processors share peripheral ID between multiple GPIO banks.
+ * SAM9263 (PIOC, PIOD, PIOE)
+ * CAP9 (PIOA, PIOB, PIOC, PIOD)
+ */
if (last && last->id == data->id)
last->next = data;
}
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index fb51f0e..0b3ae21 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -93,6 +93,7 @@
u8 enable_pin; /* chip enable */
u8 det_pin; /* card detect */
u8 rdy_pin; /* ready/busy */
+ u8 rdy_pin_active_low; /* rdy_pin value is inverted */
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 bus_width_16; /* buswidth is 16 bit */
diff --git a/arch/arm/mach-ep93xx/include/mach/gesbc9312.h b/arch/arm/mach-ep93xx/include/mach/gesbc9312.h
deleted file mode 100644
index 21fe2b9..0000000
--- a/arch/arm/mach-ep93xx/include/mach/gesbc9312.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/gesbc9312.h
- */
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 529807d..2866297 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -10,7 +10,6 @@
#include "platform.h"
-#include "gesbc9312.h"
#include "ts72xx.h"
#endif
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index efb86b7..06083b2 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -42,7 +42,7 @@
writel(0, GPIO_EDGE_CAUSE(32));
for (i = IRQ_KIRKWOOD_GPIO_START; i < NR_IRQS; i++) {
- set_irq_chip(i, &orion_gpio_irq_level_chip);
+ set_irq_chip(i, &orion_gpio_irq_chip);
set_irq_handler(i, handle_level_irq);
irq_desc[i].status |= IRQ_LEVEL;
set_irq_flags(i, IRQF_VALID);
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index e273418..30b7e4b 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -40,7 +40,7 @@
writel(0, GPIO_EDGE_CAUSE(0));
for (i = IRQ_MV78XX0_GPIO_START; i < NR_IRQS; i++) {
- set_irq_chip(i, &orion_gpio_irq_level_chip);
+ set_irq_chip(i, &orion_gpio_irq_chip);
set_irq_handler(i, handle_level_irq);
irq_desc[i].status |= IRQ_LEVEL;
set_irq_flags(i, IRQF_VALID);
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index ad721e0..ce4d46a 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -565,7 +565,7 @@
*
* Given a struct clk of a rate-selectable clksel clock, and a clock divisor,
* find the corresponding register field value. The return register value is
- * the value before left-shifting. Returns 0xffffffff on error
+ * the value before left-shifting. Returns ~0 on error
*/
u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
{
@@ -577,7 +577,7 @@
clks = omap2_get_clksel_by_parent(clk, clk->parent);
if (clks == NULL)
- return 0;
+ return ~0;
for (clkr = clks->rates; clkr->div; clkr++) {
if ((clkr->flags & cpu_mask) && (clkr->div == div))
@@ -588,7 +588,7 @@
printk(KERN_ERR "clock: Could not find divisor %d for "
"clock %s parent %s\n", div, clk->name,
clk->parent->name);
- return 0;
+ return ~0;
}
return clkr->val;
@@ -708,7 +708,7 @@
return 0;
for (clkr = clks->rates; clkr->div; clkr++) {
- if (clkr->flags & (cpu_mask | DEFAULT_RATE))
+ if (clkr->flags & cpu_mask && clkr->flags & DEFAULT_RATE)
break; /* Found the default rate for this platform */
}
@@ -746,7 +746,7 @@
return -EINVAL;
if (clk->usecount > 0)
- _omap2_clk_disable(clk);
+ omap2_clk_disable(clk);
/* Set new source value (previous dividers if any in effect) */
reg_val = __raw_readl(src_addr) & ~field_mask;
@@ -759,11 +759,11 @@
wmb();
}
- if (clk->usecount > 0)
- _omap2_clk_enable(clk);
-
clk->parent = new_parent;
+ if (clk->usecount > 0)
+ omap2_clk_enable(clk);
+
/* CLKSEL clocks follow their parents' rates, divided by a divisor */
clk->rate = new_parent->rate;
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 0caae43..e03f7b4 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -44,7 +44,7 @@
* User can use set_type() if he wants to use edge types handlers.
*/
for (i = IRQ_ORION5X_GPIO_START; i < NR_IRQS; i++) {
- set_irq_chip(i, &orion_gpio_irq_level_chip);
+ set_irq_chip(i, &orion_gpio_irq_chip);
set_irq_handler(i, handle_level_irq);
irq_desc[i].status |= IRQ_LEVEL;
set_irq_flags(i, IRQF_VALID);
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 9b36c5c..d4d082c 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -693,7 +693,8 @@
* Check whether this memory bank would entirely overlap
* the vmalloc area.
*/
- if (__va(bank->start) >= VMALLOC_MIN) {
+ if (__va(bank->start) >= VMALLOC_MIN ||
+ __va(bank->start) < PAGE_OFFSET) {
printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
"(vmalloc region overlap).\n",
bank->start, bank->start + bank->size - 1);
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 9671864..0d12c21 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -265,51 +265,36 @@
* polarity LEVEL mask
*
****************************************************************************/
-static void gpio_irq_edge_ack(u32 irq)
-{
- int pin = irq_to_gpio(irq);
- writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin));
+static void gpio_irq_ack(u32 irq)
+{
+ int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+ int pin = irq_to_gpio(irq);
+ writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin));
+ }
}
-static void gpio_irq_edge_mask(u32 irq)
+static void gpio_irq_mask(u32 irq)
{
int pin = irq_to_gpio(irq);
- u32 u;
-
- u = readl(GPIO_EDGE_MASK(pin));
+ int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
+ u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ?
+ GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin);
+ u32 u = readl(reg);
u &= ~(1 << (pin & 31));
- writel(u, GPIO_EDGE_MASK(pin));
+ writel(u, reg);
}
-static void gpio_irq_edge_unmask(u32 irq)
+static void gpio_irq_unmask(u32 irq)
{
int pin = irq_to_gpio(irq);
- u32 u;
-
- u = readl(GPIO_EDGE_MASK(pin));
+ int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
+ u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ?
+ GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin);
+ u32 u = readl(reg);
u |= 1 << (pin & 31);
- writel(u, GPIO_EDGE_MASK(pin));
-}
-
-static void gpio_irq_level_mask(u32 irq)
-{
- int pin = irq_to_gpio(irq);
- u32 u;
-
- u = readl(GPIO_LEVEL_MASK(pin));
- u &= ~(1 << (pin & 31));
- writel(u, GPIO_LEVEL_MASK(pin));
-}
-
-static void gpio_irq_level_unmask(u32 irq)
-{
- int pin = irq_to_gpio(irq);
- u32 u;
-
- u = readl(GPIO_LEVEL_MASK(pin));
- u |= 1 << (pin & 31);
- writel(u, GPIO_LEVEL_MASK(pin));
+ writel(u, reg);
}
static int gpio_irq_set_type(u32 irq, u32 type)
@@ -331,9 +316,9 @@
* Set edge/level type.
*/
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
- desc->chip = &orion_gpio_irq_edge_chip;
+ desc->handle_irq = handle_edge_irq;
} else if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
- desc->chip = &orion_gpio_irq_level_chip;
+ desc->handle_irq = handle_level_irq;
} else {
printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type);
return -EINVAL;
@@ -371,19 +356,11 @@
return 0;
}
-struct irq_chip orion_gpio_irq_edge_chip = {
- .name = "orion_gpio_irq_edge",
- .ack = gpio_irq_edge_ack,
- .mask = gpio_irq_edge_mask,
- .unmask = gpio_irq_edge_unmask,
- .set_type = gpio_irq_set_type,
-};
-
-struct irq_chip orion_gpio_irq_level_chip = {
- .name = "orion_gpio_irq_level",
- .mask = gpio_irq_level_mask,
- .mask_ack = gpio_irq_level_mask,
- .unmask = gpio_irq_level_unmask,
+struct irq_chip orion_gpio_irq_chip = {
+ .name = "orion_gpio",
+ .ack = gpio_irq_ack,
+ .mask = gpio_irq_mask,
+ .unmask = gpio_irq_unmask,
.set_type = gpio_irq_set_type,
};
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index 54deaf2..ec743e8 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -31,8 +31,7 @@
/*
* GPIO interrupt handling.
*/
-extern struct irq_chip orion_gpio_irq_edge_chip;
-extern struct irq_chip orion_gpio_irq_level_chip;
+extern struct irq_chip orion_gpio_irq_chip;
void orion_gpio_irq_handler(int irqoff);
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index aafaf7a..cff8e84 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -116,6 +116,7 @@
int enable_pin; /* chip enable */
int det_pin; /* card detect */
int rdy_pin; /* ready/busy */
+ u8 rdy_pin_active_low; /* rdy_pin value is inverted */
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 bus_width_16; /* buswidth is 16 bit */
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 6183aec..4eb45c0 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -221,7 +221,11 @@
config IA64_XEN_GUEST
bool "Xen guest"
+ select SWIOTLB
depends on XEN
+ help
+ Build a kernel that runs on Xen guest domain. At this moment only
+ 16KB page size in supported.
endchoice
@@ -479,8 +483,7 @@
default y if VIRTUAL_MEM_MAP
config HAVE_ARCH_EARLY_PFN_TO_NID
- def_bool y
- depends on NEED_MULTIPLE_NODES
+ def_bool NUMA && SPARSEMEM
config HAVE_ARCH_NODEDATA_EXTENSION
def_bool y
diff --git a/arch/ia64/configs/xen_domu_defconfig b/arch/ia64/configs/xen_domu_defconfig
new file mode 100644
index 0000000..0bb0714
--- /dev/null
+++ b/arch/ia64/configs/xen_domu_defconfig
@@ -0,0 +1,1601 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc1
+# Fri Jan 16 11:49:59 2009
+#
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=20
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+# CONFIG_GROUP_SCHED is not set
+
+#
+# Control Group support
+#
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_IA64=y
+CONFIG_64BIT=y
+CONFIG_ZONE_DMA=y
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_DMI=y
+CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_PARAVIRT_GUEST=y
+CONFIG_PARAVIRT=y
+CONFIG_XEN=y
+CONFIG_XEN_XENCOMM=y
+CONFIG_NO_IDLE_HZ=y
+# CONFIG_IA64_GENERIC is not set
+# CONFIG_IA64_DIG is not set
+# CONFIG_IA64_DIG_VTD is not set
+# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
+# CONFIG_IA64_SGI_SN2 is not set
+# CONFIG_IA64_SGI_UV is not set
+# CONFIG_IA64_HP_SIM is not set
+CONFIG_IA64_XEN_GUEST=y
+# CONFIG_ITANIUM is not set
+CONFIG_MCKINLEY=y
+# CONFIG_IA64_PAGE_SIZE_4KB is not set
+# CONFIG_IA64_PAGE_SIZE_8KB is not set
+CONFIG_IA64_PAGE_SIZE_16KB=y
+# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_IA64_L1_CACHE_SHIFT=7
+CONFIG_IA64_CYCLONE=y
+CONFIG_IOSAPIC=y
+CONFIG_FORCE_MAX_ZONEORDER=17
+# CONFIG_VIRT_CPU_ACCOUNTING is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=16
+CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_SCHED_SMT is not set
+CONFIG_PERMIT_BSP_REMOVE=y
+CONFIG_FORCE_CPEI_RETARGET=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_NR_QUICK=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
+# CONFIG_IA32_SUPPORT is not set
+# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+# CONFIG_IA64_MC_ERR_INJECT is not set
+# CONFIG_IA64_ESI is not set
+# CONFIG_IA64_HP_AML_NFW is not set
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+CONFIG_EFI_VARS=y
+CONFIG_EFI_PCDP=y
+CONFIG_DMIID=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management and ACPI options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_SYSFS_POWER=y
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_FAN=m
+# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+# CONFIG_ACPI_PCI_SLOT is not set
+CONFIG_ACPI_SYSTEM=y
+CONFIG_ACPI_CONTAINER=m
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options (PCI, PCMCIA)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+CONFIG_HOTPLUG_PCI=m
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+CONFIG_HOTPLUG_PCI_ACPI=m
+# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_PCCARD is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_XEN_BLKDEV_FRONTEND=y
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEACPI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_QLOGIC_1280=y
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID456 is not set
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_SB1000 is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+CONFIG_E100=m
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_XEN_NETDEV_FRONTEND=y
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+CONFIG_GAMEPORT=m
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
+# CONFIG_GAMEPORT_EMU10K1 is not set
+# CONFIG_GAMEPORT_FM801 is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
+CONFIG_HVC_XEN=y
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_EFI_RTC=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+# CONFIG_HANGCHECK_TIMER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=m
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_SCRUB_PAGES=y
+CONFIG_XENFS=y
+CONFIG_XEN_COMPAT_XENFS=y
+# CONFIG_STAGING is not set
+# CONFIG_MSPEC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_IA64_GRANULE_16MB=y
+# CONFIG_IA64_GRANULE_64MB is not set
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
+# CONFIG_IA64_DEBUG_CMPXCHG is not set
+# CONFIG_IA64_DEBUG_IRQ is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_HAVE_KVM=y
+CONFIG_VIRTUALIZATION=y
+# CONFIG_KVM is not set
+# CONFIG_VIRTIO_PCI is not set
+# CONFIG_VIRTIO_BALLOON is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_IRQ_PER_CPU=y
+# CONFIG_IOMMU_API is not set
diff --git a/arch/ia64/include/asm/kvm.h b/arch/ia64/include/asm/kvm.h
index 68aa6da..bfa86b6 100644
--- a/arch/ia64/include/asm/kvm.h
+++ b/arch/ia64/include/asm/kvm.h
@@ -25,6 +25,10 @@
#include <linux/ioctl.h>
+/* Select x86 specific features in <linux/kvm.h> */
+#define __KVM_HAVE_IOAPIC
+#define __KVM_HAVE_DEVICE_ASSIGNMENT
+
/* Architectural interrupt line count. */
#define KVM_NR_INTERRUPTS 256
diff --git a/arch/ia64/include/asm/mmzone.h b/arch/ia64/include/asm/mmzone.h
index 34efe88..f2ca320 100644
--- a/arch/ia64/include/asm/mmzone.h
+++ b/arch/ia64/include/asm/mmzone.h
@@ -31,10 +31,6 @@
#endif
}
-#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-extern int early_pfn_to_nid(unsigned long pfn);
-#endif
-
#ifdef CONFIG_IA64_DIG /* DIG systems are small */
# define MAX_PHYSNODE_ID 8
# define NR_NODE_MEMBLKS (MAX_NUMNODES * 8)
diff --git a/arch/ia64/include/asm/sn/bte.h b/arch/ia64/include/asm/sn/bte.h
index 5efecf0..96798d2 100644
--- a/arch/ia64/include/asm/sn/bte.h
+++ b/arch/ia64/include/asm/sn/bte.h
@@ -39,7 +39,7 @@
/* BTE status register only supports 16 bits for length field */
#define BTE_LEN_BITS (16)
#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1)
-#define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES)
+#define BTE_MAX_XFER (BTE_LEN_MASK << L1_CACHE_SHIFT)
/* Define hardware */
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 1146399..5229054 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -736,14 +736,15 @@
return -EBUSY;
}
+ cpu_clear(cpu, cpu_online_map);
+
if (migrate_platform_irqs(cpu)) {
cpu_set(cpu, cpu_online_map);
- return (-EBUSY);
+ return -EBUSY;
}
remove_siblinginfo(cpu);
fixup_irqs();
- cpu_clear(cpu, cpu_online_map);
local_flush_tlb_all();
cpu_clear(cpu, cpu_callin_map);
return 0;
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 4e586f6..28f9820 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1337,6 +1337,10 @@
}
}
+void kvm_arch_sync_events(struct kvm *kvm)
+{
+}
+
void kvm_arch_destroy_vm(struct kvm *kvm)
{
kvm_iommu_unmap_guest(kvm);
diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c
index 552d077..230eae4 100644
--- a/arch/ia64/kvm/process.c
+++ b/arch/ia64/kvm/process.c
@@ -455,13 +455,18 @@
if (!vmm_fpswa_interface)
return (fpswa_ret_t) {-1, 0, 0, 0};
- /*
- * Just let fpswa driver to use hardware fp registers.
- * No fp register is valid in memory.
- */
memset(&fp_state, 0, sizeof(fp_state_t));
/*
+ * compute fp_state. only FP registers f6 - f11 are used by the
+ * vmm, so set those bits in the mask and set the low volatile
+ * pointer to point to these registers.
+ */
+ fp_state.bitmask_low64 = 0xfc0; /* bit6..bit11 */
+
+ fp_state.fp_state_low_volatile = (fp_state_low_volatile_t *) ®s->f6;
+
+ /*
* unsigned long (*EFI_FPSWA) (
* unsigned long trap_type,
* void *Bundle,
@@ -545,10 +550,6 @@
status = vmm_handle_fpu_swa(0, regs, isr);
if (!status)
return ;
- else if (-EAGAIN == status) {
- vcpu_decrement_iip(vcpu);
- return ;
- }
break;
}
diff --git a/arch/ia64/mm/numa.c b/arch/ia64/mm/numa.c
index b73bf18..3efea7d 100644
--- a/arch/ia64/mm/numa.c
+++ b/arch/ia64/mm/numa.c
@@ -58,7 +58,7 @@
* SPARSEMEM to allocate the SPARSEMEM sectionmap on the NUMA node where
* the section resides.
*/
-int early_pfn_to_nid(unsigned long pfn)
+int __meminit __early_pfn_to_nid(unsigned long pfn)
{
int i, section = pfn >> PFN_SECTION_SHIFT, ssec, esec;
@@ -70,7 +70,7 @@
return node_memblk[i].nid;
}
- return 0;
+ return -1;
}
#ifdef CONFIG_MEMORY_HOTPLUG
diff --git a/arch/ia64/sn/kernel/bte.c b/arch/ia64/sn/kernel/bte.c
index 9456d40..c6d6b62 100644
--- a/arch/ia64/sn/kernel/bte.c
+++ b/arch/ia64/sn/kernel/bte.c
@@ -97,9 +97,10 @@
return BTE_SUCCESS;
}
- BUG_ON((len & L1_CACHE_MASK) ||
- (src & L1_CACHE_MASK) || (dest & L1_CACHE_MASK));
- BUG_ON(!(len < ((BTE_LEN_MASK + 1) << L1_CACHE_SHIFT)));
+ BUG_ON(len & L1_CACHE_MASK);
+ BUG_ON(src & L1_CACHE_MASK);
+ BUG_ON(dest & L1_CACHE_MASK);
+ BUG_ON(len > BTE_MAX_XFER);
/*
* Start with interface corresponding to cpu number
diff --git a/arch/ia64/xen/Kconfig b/arch/ia64/xen/Kconfig
index f1683a2..515e082 100644
--- a/arch/ia64/xen/Kconfig
+++ b/arch/ia64/xen/Kconfig
@@ -8,8 +8,7 @@
depends on PARAVIRT && MCKINLEY && IA64_PAGE_SIZE_16KB && EXPERIMENTAL
select XEN_XENCOMM
select NO_IDLE_HZ
-
- # those are required to save/restore.
+ # followings are required to save/restore.
select ARCH_SUSPEND_POSSIBLE
select SUSPEND
select PM_SLEEP
diff --git a/arch/ia64/xen/xen_pv_ops.c b/arch/ia64/xen/xen_pv_ops.c
index 04cd123..936cff3 100644
--- a/arch/ia64/xen/xen_pv_ops.c
+++ b/arch/ia64/xen/xen_pv_ops.c
@@ -153,7 +153,7 @@
xen_setup_vcpu_info_placement();
}
-static const struct pv_init_ops xen_init_ops __initdata = {
+static const struct pv_init_ops xen_init_ops __initconst = {
.banner = xen_banner,
.reserve_memory = xen_reserve_memory,
@@ -337,7 +337,7 @@
HYPERVISOR_physdev_op(PHYSDEVOP_apic_write, &apic_op);
}
-static const struct pv_iosapic_ops xen_iosapic_ops __initdata = {
+static const struct pv_iosapic_ops xen_iosapic_ops __initconst = {
.pcat_compat_init = xen_pcat_compat_init,
.__get_irq_chip = xen_iosapic_get_irq_chip,
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index 9a9f433..41d16822 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -7,6 +7,7 @@
config MN10300
def_bool y
+ select HAVE_OPROFILE
config AM33
def_bool y
diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c
index 1a86425..07dbbcd 100644
--- a/arch/mn10300/unit-asb2305/pci.c
+++ b/arch/mn10300/unit-asb2305/pci.c
@@ -173,7 +173,7 @@
BRIDGEREGB(where) = value;
} else {
if (bus->number == 0 &&
- (devfn == PCI_DEVFN(2, 0) && devfn == PCI_DEVFN(3, 0))
+ (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(3, 0))
)
__pcidebug("<= %02x", bus, devfn, where, value);
CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
diff --git a/arch/powerpc/include/asm/pgtable-4k.h b/arch/powerpc/include/asm/pgtable-4k.h
index 6b18ba9..1dbca4e7 100644
--- a/arch/powerpc/include/asm/pgtable-4k.h
+++ b/arch/powerpc/include/asm/pgtable-4k.h
@@ -60,7 +60,7 @@
/* It should be preserving the high 48 bits and then specifically */
/* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */
#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
- _PAGE_HPTEFLAGS)
+ _PAGE_HPTEFLAGS | _PAGE_SPECIAL)
/* Bits to mask out from a PMD to get to the PTE page */
#define PMD_MASKED_BITS 0
diff --git a/arch/powerpc/include/asm/pgtable-64k.h b/arch/powerpc/include/asm/pgtable-64k.h
index 07b0d8f..7389003 100644
--- a/arch/powerpc/include/asm/pgtable-64k.h
+++ b/arch/powerpc/include/asm/pgtable-64k.h
@@ -114,7 +114,7 @@
* pgprot changes
*/
#define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
- _PAGE_ACCESSED)
+ _PAGE_ACCESSED | _PAGE_SPECIAL)
/* Bits to mask out from a PMD to get to the PTE page */
#define PMD_MASKED_BITS 0x1ff
diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index f69a4d9..820b5f0 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -429,7 +429,8 @@
#define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE()
#endif
-#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
+ _PAGE_SPECIAL)
#define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index 5af4e9b..ada0692 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -646,11 +646,16 @@
unsigned int areg, struct pt_regs *regs,
unsigned int flags, unsigned int length)
{
- char *ptr = (char *) ¤t->thread.TS_FPR(reg);
+ char *ptr;
int ret = 0;
flush_vsx_to_thread(current);
+ if (reg < 32)
+ ptr = (char *) ¤t->thread.TS_FPR(reg);
+ else
+ ptr = (char *) ¤t->thread.vr[reg - 32];
+
if (flags & ST)
ret = __copy_to_user(addr, ptr, length);
else {
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 2822c8c..5f81256 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -125,6 +125,10 @@
}
}
+void kvm_arch_sync_events(struct kvm *kvm)
+{
+}
+
void kvm_arch_destroy_vm(struct kvm *kvm)
{
kvmppc_free_vcpus(kvm);
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 7393bd7..5ac08b8 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -19,6 +19,7 @@
#include <linux/notifier.h>
#include <linux/lmb.h>
#include <linux/of.h>
+#include <linux/pfn.h>
#include <asm/sparsemem.h>
#include <asm/prom.h>
#include <asm/system.h>
@@ -882,7 +883,7 @@
unsigned long physbase = lmb.reserved.region[i].base;
unsigned long size = lmb.reserved.region[i].size;
unsigned long start_pfn = physbase >> PAGE_SHIFT;
- unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT);
+ unsigned long end_pfn = PFN_UP(physbase + size);
struct node_active_region node_ar;
unsigned long node_end_pfn = node->node_start_pfn +
node->node_spanned_pages;
@@ -908,7 +909,7 @@
*/
if (end_pfn > node_ar.end_pfn)
reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
- - (start_pfn << PAGE_SHIFT);
+ - physbase;
/*
* Only worry about *this* node, others may not
* yet have valid NODE_DATA().
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 67de6bf..d281cc0 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -328,7 +328,7 @@
return result;
}
-core_initcall(ps3_mm_add_memory);
+device_initcall(ps3_mm_add_memory);
/*============================================================================*/
/* dma routines */
diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
index 5217264..95b0f7d 100644
--- a/arch/s390/include/asm/cputime.h
+++ b/arch/s390/include/asm/cputime.h
@@ -145,7 +145,7 @@
value->tv_usec = rp.subreg.even / 4096;
value->tv_sec = rp.subreg.odd;
#else
- value->tv_usec = cputime % 4096000000ULL;
+ value->tv_usec = (cputime % 4096000000ULL) / 4096;
value->tv_sec = cputime / 4096000000ULL;
#endif
}
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index 2bd9fae..e8bd6ac 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -43,6 +43,8 @@
extern struct mem_chunk memory_chunk[];
extern unsigned long real_memory_size;
+extern int memory_end_set;
+extern unsigned long memory_end;
void detect_memory_layout(struct mem_chunk chunk[]);
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index d825f49..c5cfb61 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -82,7 +82,9 @@
struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS];
volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */
-static unsigned long __initdata memory_end;
+
+int __initdata memory_end_set;
+unsigned long __initdata memory_end;
/*
* This is set up by the setup-routine at boot-time
@@ -281,6 +283,7 @@
static int __init early_parse_mem(char *p)
{
memory_end = memparse(p, &p);
+ memory_end_set = 1;
return 0;
}
early_param("mem", early_parse_mem);
@@ -508,8 +511,10 @@
int i;
#if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE)
- if (ipl_info.type == IPL_TYPE_FCP_DUMP)
+ if (ipl_info.type == IPL_TYPE_FCP_DUMP) {
memory_end = ZFCPDUMP_HSA_SIZE;
+ memory_end_set = 1;
+ }
#endif
memory_size = 0;
memory_end &= PAGE_MASK;
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index be84971..0d33893 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -212,6 +212,10 @@
}
}
+void kvm_arch_sync_events(struct kvm *kvm)
+{
+}
+
void kvm_arch_destroy_vm(struct kvm *kvm)
{
kvm_free_vcpus(kvm);
diff --git a/arch/um/drivers/vde_user.c b/arch/um/drivers/vde_user.c
index 56533db..c5c4325 100644
--- a/arch/um/drivers/vde_user.c
+++ b/arch/um/drivers/vde_user.c
@@ -78,7 +78,7 @@
{
struct vde_open_args *args;
- vpri->args = kmalloc(sizeof(struct vde_open_args), UM_GFP_KERNEL);
+ vpri->args = uml_kmalloc(sizeof(struct vde_open_args), UM_GFP_KERNEL);
if (vpri->args == NULL) {
printk(UM_KERN_ERR "vde_init_libstuff - vde_open_args "
"allocation failed");
@@ -91,8 +91,8 @@
args->group = init->group;
args->mode = init->mode ? init->mode : 0700;
- args->port ? printk(UM_KERN_INFO "port %d", args->port) :
- printk(UM_KERN_INFO "undefined port");
+ args->port ? printk("port %d", args->port) :
+ printk("undefined port");
}
int vde_user_read(void *conn, void *buf, int len)
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 10d6cc3..e1983fa 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -174,28 +174,8 @@
Add a simple leak tracer to the IOMMU code. This is useful when you
are debugging a buggy device driver that leaks IOMMU mappings.
-config MMIOTRACE
- bool "Memory mapped IO tracing"
- depends on DEBUG_KERNEL && PCI
- select TRACING
- help
- Mmiotrace traces Memory Mapped I/O access and is meant for
- debugging and reverse engineering. It is called from the ioremap
- implementation and works via page faults. Tracing is disabled by
- default and can be enabled at run-time.
-
- See Documentation/tracers/mmiotrace.txt.
- If you are not helping to develop drivers, say N.
-
-config MMIOTRACE_TEST
- tristate "Test module for mmiotrace"
- depends on MMIOTRACE && m
- help
- This is a dumb module for testing mmiotrace. It is very dangerous
- as it will write garbage to IO memory starting at a given address.
- However, it should be safe to use on e.g. unused portion of VRAM.
-
- Say N, unless you absolutely know what you are doing.
+config HAVE_MMIOTRACE_SUPPORT
+ def_bool y
#
# IO delay types:
diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h
index d2e3bf3..886c940 100644
--- a/arch/x86/include/asm/kvm.h
+++ b/arch/x86/include/asm/kvm.h
@@ -9,6 +9,13 @@
#include <linux/types.h>
#include <linux/ioctl.h>
+/* Select x86 specific features in <linux/kvm.h> */
+#define __KVM_HAVE_PIT
+#define __KVM_HAVE_IOAPIC
+#define __KVM_HAVE_DEVICE_ASSIGNMENT
+#define __KVM_HAVE_MSI
+#define __KVM_HAVE_USER_NMI
+
/* Architectural interrupt line count. */
#define KVM_NR_INTERRUPTS 256
diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h
index 07f1af4..105fb90 100644
--- a/arch/x86/include/asm/mmzone_32.h
+++ b/arch/x86/include/asm/mmzone_32.h
@@ -32,8 +32,6 @@
get_memcfg_numa_flat();
}
-extern int early_pfn_to_nid(unsigned long pfn);
-
extern void resume_map_numa_kva(pgd_t *pgd);
#else /* !CONFIG_NUMA */
diff --git a/arch/x86/include/asm/mmzone_64.h b/arch/x86/include/asm/mmzone_64.h
index a5b3817..a29f48c 100644
--- a/arch/x86/include/asm/mmzone_64.h
+++ b/arch/x86/include/asm/mmzone_64.h
@@ -40,8 +40,6 @@
#define node_end_pfn(nid) (NODE_DATA(nid)->node_start_pfn + \
NODE_DATA(nid)->node_spanned_pages)
-extern int early_pfn_to_nid(unsigned long pfn);
-
#ifdef CONFIG_NUMA_EMU
#define FAKE_NODE_MIN_SIZE (64 * 1024 * 1024)
#define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL))
diff --git a/arch/x86/include/asm/page.h b/arch/x86/include/asm/page.h
index e9873a2..7765791 100644
--- a/arch/x86/include/asm/page.h
+++ b/arch/x86/include/asm/page.h
@@ -57,7 +57,6 @@
typedef struct { pgprotval_t pgprot; } pgprot_t;
extern int page_is_ram(unsigned long pagenr);
-extern int pagerange_is_ram(unsigned long start, unsigned long end);
extern int devmem_is_allowed(unsigned long pagenr);
extern void map_devmem(unsigned long pfn, unsigned long size,
pgprot_t vma_prot);
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index c09a141..e299287 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -1352,14 +1352,7 @@
PVOP_VCALL0(pv_cpu_ops.lazy_mode.leave);
}
-static inline void arch_flush_lazy_cpu_mode(void)
-{
- if (unlikely(paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU)) {
- arch_leave_lazy_cpu_mode();
- arch_enter_lazy_cpu_mode();
- }
-}
-
+void arch_flush_lazy_cpu_mode(void);
#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE
static inline void arch_enter_lazy_mmu_mode(void)
@@ -1372,13 +1365,7 @@
PVOP_VCALL0(pv_mmu_ops.lazy_mode.leave);
}
-static inline void arch_flush_lazy_mmu_mode(void)
-{
- if (unlikely(paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU)) {
- arch_leave_lazy_mmu_mode();
- arch_enter_lazy_mmu_mode();
- }
-}
+void arch_flush_lazy_mmu_mode(void);
static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
unsigned long phys, pgprot_t flags)
diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S
index bcc2934..96258d9 100644
--- a/arch/x86/kernel/acpi/wakeup_64.S
+++ b/arch/x86/kernel/acpi/wakeup_64.S
@@ -13,7 +13,6 @@
* Hooray, we are in Long 64-bit mode (but still running in low memory)
*/
ENTRY(wakeup_long64)
-wakeup_long64:
movq saved_magic, %rax
movq $0x123456789abcdef0, %rdx
cmpq %rdx, %rax
@@ -34,16 +33,12 @@
movq saved_rip, %rax
jmp *%rax
+ENDPROC(wakeup_long64)
bogus_64_magic:
jmp bogus_64_magic
- .align 2
- .p2align 4,,15
-.globl do_suspend_lowlevel
- .type do_suspend_lowlevel,@function
-do_suspend_lowlevel:
-.LFB5:
+ENTRY(do_suspend_lowlevel)
subq $8, %rsp
xorl %eax, %eax
call save_processor_state
@@ -67,7 +62,7 @@
pushfq
popq pt_regs_flags(%rax)
- movq $.L97, saved_rip(%rip)
+ movq $resume_point, saved_rip(%rip)
movq %rsp, saved_rsp
movq %rbp, saved_rbp
@@ -78,14 +73,12 @@
addq $8, %rsp
movl $3, %edi
xorl %eax, %eax
- jmp acpi_enter_sleep_state
-.L97:
- .p2align 4,,7
-.L99:
- .align 4
- movl $24, %eax
- movw %ax, %ds
+ call acpi_enter_sleep_state
+ /* in case something went wrong, restore the machine status and go on */
+ jmp resume_point
+ .align 4
+resume_point:
/* We don't restore %rax, it must be 0 anyway */
movq $saved_context, %rax
movq saved_context_cr4(%rax), %rbx
@@ -117,12 +110,9 @@
xorl %eax, %eax
addq $8, %rsp
jmp restore_processor_state
-.LFE5:
-.Lfe5:
- .size do_suspend_lowlevel, .Lfe5-do_suspend_lowlevel
-
+ENDPROC(do_suspend_lowlevel)
+
.data
-ALIGN
ENTRY(saved_rbp) .quad 0
ENTRY(saved_rsi) .quad 0
ENTRY(saved_rdi) .quad 0
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 115449f..570f36e 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -862,7 +862,7 @@
}
/* lets not touch this if we didn't frob it */
-#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL)
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
if (maxlvt >= 5) {
v = apic_read(APIC_LVTTHMR);
apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index fb039cd..6428aa1 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -1157,8 +1157,7 @@
data->cpu = pol->cpu;
data->currpstate = HW_PSTATE_INVALID;
- rc = powernow_k8_cpu_init_acpi(data);
- if (rc) {
+ if (powernow_k8_cpu_init_acpi(data)) {
/*
* Use the PSB BIOS structure. This is only availabe on
* an UP version, and is deprecated by AMD.
@@ -1176,17 +1175,20 @@
"ACPI maintainers and complain to your BIOS "
"vendor.\n");
#endif
- goto err_out;
+ kfree(data);
+ return -ENODEV;
}
if (pol->cpu != 0) {
printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for "
"CPU other than CPU0. Complain to your BIOS "
"vendor.\n");
- goto err_out;
+ kfree(data);
+ return -ENODEV;
}
rc = find_psb_table(data);
if (rc) {
- goto err_out;
+ kfree(data);
+ return -ENODEV;
}
/* Take a crude guess here.
* That guess was in microseconds, so multiply with 1000 */
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index 1c83803..fe79985 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -295,11 +295,11 @@
* If we know that the error was in user space, send a
* SIGBUS. Otherwise, panic if tolerance is low.
*
- * do_exit() takes an awful lot of locks and has a slight
+ * force_sig() takes an awful lot of locks and has a slight
* risk of deadlocking.
*/
if (user_space) {
- do_exit(SIGBUS);
+ force_sig(SIGBUS, current);
} else if (panic_on_oops || tolerant < 2) {
mce_panic("Uncorrected machine check",
&panicm, mcestart);
@@ -490,7 +490,7 @@
}
-static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c)
+static void mce_cpu_features(struct cpuinfo_x86 *c)
{
switch (c->x86_vendor) {
case X86_VENDOR_INTEL:
@@ -734,6 +734,7 @@
static int mce_resume(struct sys_device *dev)
{
mce_init(NULL);
+ mce_cpu_features(¤t_cpu_data);
return 0;
}
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
index 8ae8c4f..f2ee0ae 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
@@ -121,7 +121,7 @@
}
/* cpu init entry point, called from mce.c with preempt off */
-void __cpuinit mce_amd_feature_init(struct cpuinfo_x86 *c)
+void mce_amd_feature_init(struct cpuinfo_x86 *c)
{
unsigned int bank, block;
unsigned int cpu = smp_processor_id();
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
index 4b48f25..f44c366 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
@@ -30,7 +30,7 @@
irq_exit();
}
-static void __cpuinit intel_init_thermal(struct cpuinfo_x86 *c)
+static void intel_init_thermal(struct cpuinfo_x86 *c)
{
u32 l, h;
int tm2 = 0;
@@ -84,7 +84,7 @@
return;
}
-void __cpuinit mce_intel_feature_init(struct cpuinfo_x86 *c)
+void mce_intel_feature_init(struct cpuinfo_x86 *c)
{
intel_init_thermal(c);
}
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 388254f..a00545f 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -269,6 +269,8 @@
now = hpet_readl(HPET_COUNTER);
cmp = now + (unsigned long) delta;
cfg = hpet_readl(HPET_Tn_CFG(timer));
+ /* Make sure we use edge triggered interrupts */
+ cfg &= ~HPET_TN_LEVEL;
cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
HPET_TN_SETVAL | HPET_TN_32BIT;
hpet_writel(cfg, HPET_Tn_CFG(timer));
diff --git a/arch/x86/kernel/olpc.c b/arch/x86/kernel/olpc.c
index 7a13fac..4006c52 100644
--- a/arch/x86/kernel/olpc.c
+++ b/arch/x86/kernel/olpc.c
@@ -203,7 +203,7 @@
static void __init platform_detect(void)
{
/* stopgap until OFW support is added to the kernel */
- olpc_platform_info.boardrev = 0xc2;
+ olpc_platform_info.boardrev = olpc_board(0xc2);
}
#endif
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index e4c8fb6..c6520a4 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -268,6 +268,32 @@
return __get_cpu_var(paravirt_lazy_mode);
}
+void arch_flush_lazy_mmu_mode(void)
+{
+ preempt_disable();
+
+ if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU) {
+ WARN_ON(preempt_count() == 1);
+ arch_leave_lazy_mmu_mode();
+ arch_enter_lazy_mmu_mode();
+ }
+
+ preempt_enable();
+}
+
+void arch_flush_lazy_cpu_mode(void)
+{
+ preempt_disable();
+
+ if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU) {
+ WARN_ON(preempt_count() == 1);
+ arch_leave_lazy_cpu_mode();
+ arch_enter_lazy_cpu_mode();
+ }
+
+ preempt_enable();
+}
+
struct pv_info pv_info = {
.name = "bare hardware",
.paravirt_enabled = 0,
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index a546f55..bd4da2a 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -104,9 +104,6 @@
check_pgt_cache();
rmb();
- if (rcu_pending(cpu))
- rcu_check_callbacks(cpu, 0);
-
if (cpu_is_offline(cpu))
play_dead();
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 0a5df5f..5a4c23d 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -810,12 +810,16 @@
static void ptrace_bts_detach(struct task_struct *child)
{
- if (unlikely(child->bts)) {
- ds_release_bts(child->bts);
- child->bts = NULL;
-
- ptrace_bts_free_buffer(child);
- }
+ /*
+ * Ptrace_detach() races with ptrace_untrace() in case
+ * the child dies and is reaped by another thread.
+ *
+ * We only do the memory accounting at this point and
+ * leave the buffer deallocation and the bts tracer
+ * release to ptrace_bts_untrace() which will be called
+ * later on with tasklist_lock held.
+ */
+ release_locked_buffer(child->bts_buffer, child->bts_size);
}
#else
static inline void ptrace_bts_fork(struct task_struct *tsk) {}
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 7932338..a9e7548 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -99,6 +99,12 @@
local_irq_enable();
}
+static inline void conditional_cli(struct pt_regs *regs)
+{
+ if (regs->flags & X86_EFLAGS_IF)
+ local_irq_disable();
+}
+
static inline void preempt_conditional_cli(struct pt_regs *regs)
{
if (regs->flags & X86_EFLAGS_IF)
@@ -626,8 +632,10 @@
#ifdef CONFIG_X86_32
debug_vm86:
+ /* reenable preemption: handle_vm86_trap() might sleep */
+ dec_preempt_count();
handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1);
- preempt_conditional_cli(regs);
+ conditional_cli(regs);
return;
#endif
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index c4c1f9e..bde106c 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -283,10 +283,13 @@
#endif
/** vmi clocksource */
+static struct clocksource clocksource_vmi;
static cycle_t read_real_cycles(void)
{
- return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL);
+ cycle_t ret = (cycle_t)vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL);
+ return ret >= clocksource_vmi.cycle_last ?
+ ret : clocksource_vmi.cycle_last;
}
static struct clocksource clocksource_vmi = {
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index e665d1c..72bd275 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -207,7 +207,7 @@
hrtimer_add_expires_ns(&pt->timer, pt->period);
pt->scheduled = hrtimer_get_expires_ns(&pt->timer);
if (pt->period)
- ps->channels[0].count_load_time = hrtimer_get_expires(&pt->timer);
+ ps->channels[0].count_load_time = ktime_get();
return (pt->period == 0 ? 0 : 1);
}
diff --git a/arch/x86/kvm/irq.c b/arch/x86/kvm/irq.c
index c019b8e..cf17ed5 100644
--- a/arch/x86/kvm/irq.c
+++ b/arch/x86/kvm/irq.c
@@ -87,13 +87,6 @@
}
EXPORT_SYMBOL_GPL(kvm_inject_pending_timer_irqs);
-void kvm_timer_intr_post(struct kvm_vcpu *vcpu, int vec)
-{
- kvm_apic_timer_intr_post(vcpu, vec);
- /* TODO: PIT, RTC etc. */
-}
-EXPORT_SYMBOL_GPL(kvm_timer_intr_post);
-
void __kvm_migrate_timers(struct kvm_vcpu *vcpu)
{
__kvm_migrate_apic_timer(vcpu);
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index 2bf32a0..82579ee 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -89,7 +89,6 @@
void kvm_pic_reset(struct kvm_kpic_state *s);
-void kvm_timer_intr_post(struct kvm_vcpu *vcpu, int vec);
void kvm_inject_pending_timer_irqs(struct kvm_vcpu *vcpu);
void kvm_inject_apic_timer_irqs(struct kvm_vcpu *vcpu);
void kvm_apic_nmi_wd_deliver(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index afac68c..f0b67f2 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -35,6 +35,12 @@
#include "kvm_cache_regs.h"
#include "irq.h"
+#ifndef CONFIG_X86_64
+#define mod_64(x, y) ((x) - (y) * div64_u64(x, y))
+#else
+#define mod_64(x, y) ((x) % (y))
+#endif
+
#define PRId64 "d"
#define PRIx64 "llx"
#define PRIu64 "u"
@@ -511,52 +517,22 @@
static u32 apic_get_tmcct(struct kvm_lapic *apic)
{
- u64 counter_passed;
- ktime_t passed, now;
+ ktime_t remaining;
+ s64 ns;
u32 tmcct;
ASSERT(apic != NULL);
- now = apic->timer.dev.base->get_time();
- tmcct = apic_get_reg(apic, APIC_TMICT);
-
/* if initial count is 0, current count should also be 0 */
- if (tmcct == 0)
+ if (apic_get_reg(apic, APIC_TMICT) == 0)
return 0;
- if (unlikely(ktime_to_ns(now) <=
- ktime_to_ns(apic->timer.last_update))) {
- /* Wrap around */
- passed = ktime_add(( {
- (ktime_t) {
- .tv64 = KTIME_MAX -
- (apic->timer.last_update).tv64}; }
- ), now);
- apic_debug("time elapsed\n");
- } else
- passed = ktime_sub(now, apic->timer.last_update);
+ remaining = hrtimer_expires_remaining(&apic->timer.dev);
+ if (ktime_to_ns(remaining) < 0)
+ remaining = ktime_set(0, 0);
- counter_passed = div64_u64(ktime_to_ns(passed),
- (APIC_BUS_CYCLE_NS * apic->timer.divide_count));
-
- if (counter_passed > tmcct) {
- if (unlikely(!apic_lvtt_period(apic))) {
- /* one-shot timers stick at 0 until reset */
- tmcct = 0;
- } else {
- /*
- * periodic timers reset to APIC_TMICT when they
- * hit 0. The while loop simulates this happening N
- * times. (counter_passed %= tmcct) would also work,
- * but might be slower or not work on 32-bit??
- */
- while (counter_passed > tmcct)
- counter_passed -= tmcct;
- tmcct -= counter_passed;
- }
- } else {
- tmcct -= counter_passed;
- }
+ ns = mod_64(ktime_to_ns(remaining), apic->timer.period);
+ tmcct = div64_u64(ns, (APIC_BUS_CYCLE_NS * apic->timer.divide_count));
return tmcct;
}
@@ -653,8 +629,6 @@
{
ktime_t now = apic->timer.dev.base->get_time();
- apic->timer.last_update = now;
-
apic->timer.period = apic_get_reg(apic, APIC_TMICT) *
APIC_BUS_CYCLE_NS * apic->timer.divide_count;
atomic_set(&apic->timer.pending, 0);
@@ -1110,16 +1084,6 @@
}
}
-void kvm_apic_timer_intr_post(struct kvm_vcpu *vcpu, int vec)
-{
- struct kvm_lapic *apic = vcpu->arch.apic;
-
- if (apic && apic_lvt_vector(apic, APIC_LVTT) == vec)
- apic->timer.last_update = ktime_add_ns(
- apic->timer.last_update,
- apic->timer.period);
-}
-
int kvm_get_apic_interrupt(struct kvm_vcpu *vcpu)
{
int vector = kvm_apic_has_interrupt(vcpu);
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index 8185888..45ab6ee 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -12,7 +12,6 @@
atomic_t pending;
s64 period; /* unit: ns */
u32 divide_count;
- ktime_t last_update;
struct hrtimer dev;
} timer;
struct kvm_vcpu *vcpu;
@@ -42,7 +41,6 @@
void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu);
int kvm_lapic_enabled(struct kvm_vcpu *vcpu);
int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu);
-void kvm_apic_timer_intr_post(struct kvm_vcpu *vcpu, int vec);
void kvm_lapic_set_vapic_addr(struct kvm_vcpu *vcpu, gpa_t vapic_addr);
void kvm_lapic_sync_from_vapic(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 83f11c7..2d4477c 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1698,8 +1698,13 @@
if (largepage)
spte |= PT_PAGE_SIZE_MASK;
if (mt_mask) {
- mt_mask = get_memory_type(vcpu, gfn) <<
- kvm_x86_ops->get_mt_mask_shift();
+ if (!kvm_is_mmio_pfn(pfn)) {
+ mt_mask = get_memory_type(vcpu, gfn) <<
+ kvm_x86_ops->get_mt_mask_shift();
+ mt_mask |= VMX_EPT_IGMT_BIT;
+ } else
+ mt_mask = MTRR_TYPE_UNCACHABLE <<
+ kvm_x86_ops->get_mt_mask_shift();
spte |= mt_mask;
}
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 1452851..a9e769e 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1600,7 +1600,6 @@
/* Okay, we can deliver the interrupt: grab it and update PIC state. */
intr_vector = kvm_cpu_get_interrupt(vcpu);
svm_inject_irq(svm, intr_vector);
- kvm_timer_intr_post(vcpu, intr_vector);
out:
update_cr8_intercept(vcpu);
}
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 6259d74..7611af5 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -903,6 +903,7 @@
data = vmcs_readl(GUEST_SYSENTER_ESP);
break;
default:
+ vmx_load_host_state(to_vmx(vcpu));
msr = find_msr_entry(to_vmx(vcpu), msr_index);
if (msr) {
data = msr->data;
@@ -3285,7 +3286,6 @@
}
if (vcpu->arch.interrupt.pending) {
vmx_inject_irq(vcpu, vcpu->arch.interrupt.nr);
- kvm_timer_intr_post(vcpu, vcpu->arch.interrupt.nr);
if (kvm_cpu_has_interrupt(vcpu))
enable_irq_window(vcpu);
}
@@ -3687,8 +3687,7 @@
if (vm_need_ept()) {
bypass_guest_pf = 0;
kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
- VMX_EPT_WRITABLE_MASK |
- VMX_EPT_IGMT_BIT);
+ VMX_EPT_WRITABLE_MASK);
kvm_mmu_set_mask_ptes(0ull, 0ull, 0ull, 0ull,
VMX_EPT_EXECUTABLE_MASK,
VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index cc17546..758b7a1 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -967,7 +967,6 @@
case KVM_CAP_MMU_SHADOW_CACHE_CONTROL:
case KVM_CAP_SET_TSS_ADDR:
case KVM_CAP_EXT_CPUID:
- case KVM_CAP_CLOCKSOURCE:
case KVM_CAP_PIT:
case KVM_CAP_NOP_IO_DELAY:
case KVM_CAP_MP_STATE:
@@ -992,6 +991,9 @@
case KVM_CAP_IOMMU:
r = iommu_found();
break;
+ case KVM_CAP_CLOCKSOURCE:
+ r = boot_cpu_has(X86_FEATURE_CONSTANT_TSC);
+ break;
default:
r = 0;
break;
@@ -4127,9 +4129,13 @@
}
-void kvm_arch_destroy_vm(struct kvm *kvm)
+void kvm_arch_sync_events(struct kvm *kvm)
{
kvm_free_all_assigned_devices(kvm);
+}
+
+void kvm_arch_destroy_vm(struct kvm *kvm)
+{
kvm_iommu_unmap_guest(kvm);
kvm_free_pit(kvm);
kfree(kvm->arch.vpic);
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index af750ab..f45d5e2 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -134,25 +134,6 @@
return 0;
}
-int pagerange_is_ram(unsigned long start, unsigned long end)
-{
- int ram_page = 0, not_rampage = 0;
- unsigned long page_nr;
-
- for (page_nr = (start >> PAGE_SHIFT); page_nr < (end >> PAGE_SHIFT);
- ++page_nr) {
- if (page_is_ram(page_nr))
- ram_page = 1;
- else
- not_rampage = 1;
-
- if (ram_page == not_rampage)
- return -1;
- }
-
- return ram_page;
-}
-
/*
* Fix up the linear direct mapping of the kernel to avoid cache attribute
* conflicts.
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 71a14f8..f3516da 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -145,7 +145,7 @@
return shift;
}
-int early_pfn_to_nid(unsigned long pfn)
+int __meminit __early_pfn_to_nid(unsigned long pfn)
{
return phys_to_nid(pfn << PAGE_SHIFT);
}
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 84ba748..7be47d1 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -508,18 +508,13 @@
#endif
/*
- * Install the new, split up pagetable. Important details here:
+ * Install the new, split up pagetable.
*
- * On Intel the NX bit of all levels must be cleared to make a
- * page executable. See section 4.13.2 of Intel 64 and IA-32
- * Architectures Software Developer's Manual).
- *
- * Mark the entry present. The current mapping might be
- * set to not present, which we preserved above.
+ * We use the standard kernel pagetable protections for the new
+ * pagetable protections, the actual ptes set above control the
+ * primary protection behavior:
*/
- ref_prot = pte_pgprot(pte_mkexec(pte_clrhuge(*kpte)));
- pgprot_val(ref_prot) |= _PAGE_PRESENT;
- __set_pmd_pte(kpte, address, mk_pte(base, ref_prot));
+ __set_pmd_pte(kpte, address, mk_pte(base, __pgprot(_KERNPG_TABLE)));
base = NULL;
out_unlock:
@@ -575,7 +570,6 @@
address = cpa->vaddr[cpa->curpage];
else
address = *cpa->vaddr;
-
repeat:
kpte = lookup_address(address, &level);
if (!kpte)
@@ -812,6 +806,13 @@
vm_unmap_aliases();
+ /*
+ * If we're called with lazy mmu updates enabled, the
+ * in-memory pte state may be stale. Flush pending updates to
+ * bring them up to date.
+ */
+ arch_flush_lazy_mmu_mode();
+
cpa.vaddr = addr;
cpa.numpages = numpages;
cpa.mask_set = mask_set;
@@ -854,6 +855,13 @@
} else
cpa_flush_all(cache);
+ /*
+ * If we've been called with lazy mmu updates enabled, then
+ * make sure that everything gets flushed out before we
+ * return.
+ */
+ arch_flush_lazy_mmu_mode();
+
out:
return ret;
}
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 7b61036..aebbf67 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -211,6 +211,33 @@
static struct memtype *cached_entry;
static u64 cached_start;
+static int pat_pagerange_is_ram(unsigned long start, unsigned long end)
+{
+ int ram_page = 0, not_rampage = 0;
+ unsigned long page_nr;
+
+ for (page_nr = (start >> PAGE_SHIFT); page_nr < (end >> PAGE_SHIFT);
+ ++page_nr) {
+ /*
+ * For legacy reasons, physical address range in the legacy ISA
+ * region is tracked as non-RAM. This will allow users of
+ * /dev/mem to map portions of legacy ISA region, even when
+ * some of those portions are listed(or not even listed) with
+ * different e820 types(RAM/reserved/..)
+ */
+ if (page_nr >= (ISA_END_ADDRESS >> PAGE_SHIFT) &&
+ page_is_ram(page_nr))
+ ram_page = 1;
+ else
+ not_rampage = 1;
+
+ if (ram_page == not_rampage)
+ return -1;
+ }
+
+ return ram_page;
+}
+
/*
* For RAM pages, mark the pages as non WB memory type using
* PageNonWB (PG_arch_1). We allow only one set_memory_uc() or
@@ -336,20 +363,12 @@
if (new_type)
*new_type = actual_type;
- /*
- * For legacy reasons, some parts of the physical address range in the
- * legacy 1MB region is treated as non-RAM (even when listed as RAM in
- * the e820 tables). So we will track the memory attributes of this
- * legacy 1MB region using the linear memtype_list always.
- */
- if (end >= ISA_END_ADDRESS) {
- is_range_ram = pagerange_is_ram(start, end);
- if (is_range_ram == 1)
- return reserve_ram_pages_type(start, end, req_type,
- new_type);
- else if (is_range_ram < 0)
- return -EINVAL;
- }
+ is_range_ram = pat_pagerange_is_ram(start, end);
+ if (is_range_ram == 1)
+ return reserve_ram_pages_type(start, end, req_type,
+ new_type);
+ else if (is_range_ram < 0)
+ return -EINVAL;
new = kmalloc(sizeof(struct memtype), GFP_KERNEL);
if (!new)
@@ -446,19 +465,11 @@
if (is_ISA_range(start, end - 1))
return 0;
- /*
- * For legacy reasons, some parts of the physical address range in the
- * legacy 1MB region is treated as non-RAM (even when listed as RAM in
- * the e820 tables). So we will track the memory attributes of this
- * legacy 1MB region using the linear memtype_list always.
- */
- if (end >= ISA_END_ADDRESS) {
- is_range_ram = pagerange_is_ram(start, end);
- if (is_range_ram == 1)
- return free_ram_pages_type(start, end);
- else if (is_range_ram < 0)
- return -EINVAL;
- }
+ is_range_ram = pat_pagerange_is_ram(start, end);
+ if (is_range_ram == 1)
+ return free_ram_pages_type(start, end);
+ else if (is_range_ram < 0)
+ return -EINVAL;
spin_lock(&memtype_lock);
list_for_each_entry(entry, &memtype_list, nd) {
@@ -626,17 +637,13 @@
unsigned long flags;
unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK);
- is_ram = pagerange_is_ram(paddr, paddr + size);
+ is_ram = pat_pagerange_is_ram(paddr, paddr + size);
- if (is_ram != 0) {
- /*
- * For mapping RAM pages, drivers need to call
- * set_memory_[uc|wc|wb] directly, for reserve and free, before
- * setting up the PTE.
- */
- WARN_ON_ONCE(1);
- return 0;
- }
+ /*
+ * reserve_pfn_range() doesn't support RAM pages.
+ */
+ if (is_ram != 0)
+ return -EINVAL;
ret = reserve_memtype(paddr, paddr + size, want_flags, &flags);
if (ret)
@@ -693,7 +700,7 @@
{
int is_ram;
- is_ram = pagerange_is_ram(paddr, paddr + size);
+ is_ram = pat_pagerange_is_ram(paddr, paddr + size);
if (is_ram == 0)
free_memtype(paddr, paddr + size);
}
diff --git a/block/blk-timeout.c b/block/blk-timeout.c
index a095353..bbbdc4b 100644
--- a/block/blk-timeout.c
+++ b/block/blk-timeout.c
@@ -209,12 +209,19 @@
{
unsigned long flags;
struct request *rq, *tmp;
+ LIST_HEAD(list);
spin_lock_irqsave(q->queue_lock, flags);
elv_abort_queue(q);
- list_for_each_entry_safe(rq, tmp, &q->timeout_list, timeout_list)
+ /*
+ * Splice entries to local list, to avoid deadlocking if entries
+ * get readded to the timeout list by error handling
+ */
+ list_splice_init(&q->timeout_list, &list);
+
+ list_for_each_entry_safe(rq, tmp, &list, timeout_list)
blk_abort_request(rq);
spin_unlock_irqrestore(q->queue_lock, flags);
diff --git a/block/blktrace.c b/block/blktrace.c
index 39cc3bf..7cf9d1f 100644
--- a/block/blktrace.c
+++ b/block/blktrace.c
@@ -142,7 +142,7 @@
what |= ddir_act[rw & WRITE];
what |= MASK_TC_BIT(rw, BARRIER);
- what |= MASK_TC_BIT(rw, SYNC);
+ what |= MASK_TC_BIT(rw, SYNCIO);
what |= MASK_TC_BIT(rw, AHEAD);
what |= MASK_TC_BIT(rw, META);
what |= MASK_TC_BIT(rw, DISCARD);
diff --git a/block/bsg.c b/block/bsg.c
index d414bb5..0ce8806 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -244,7 +244,8 @@
* map sg_io_v4 to a request.
*/
static struct request *
-bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr, fmode_t has_write_perm)
+bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr, fmode_t has_write_perm,
+ u8 *sense)
{
struct request_queue *q = bd->queue;
struct request *rq, *next_rq = NULL;
@@ -306,6 +307,10 @@
if (ret)
goto out;
}
+
+ rq->sense = sense;
+ rq->sense_len = 0;
+
return rq;
out:
if (rq->cmd != rq->__cmd)
@@ -348,9 +353,6 @@
static void bsg_add_command(struct bsg_device *bd, struct request_queue *q,
struct bsg_command *bc, struct request *rq)
{
- rq->sense = bc->sense;
- rq->sense_len = 0;
-
/*
* add bc command to busy queue and submit rq for io
*/
@@ -419,7 +421,7 @@
{
int ret = 0;
- dprintk("rq %p bio %p %u\n", rq, bio, rq->errors);
+ dprintk("rq %p bio %p 0x%x\n", rq, bio, rq->errors);
/*
* fill in all the output members
*/
@@ -635,7 +637,7 @@
/*
* get a request, fill in the blanks, and add to request queue
*/
- rq = bsg_map_hdr(bd, &bc->hdr, has_write_perm);
+ rq = bsg_map_hdr(bd, &bc->hdr, has_write_perm, bc->sense);
if (IS_ERR(rq)) {
ret = PTR_ERR(rq);
rq = NULL;
@@ -922,11 +924,12 @@
struct request *rq;
struct bio *bio, *bidi_bio = NULL;
struct sg_io_v4 hdr;
+ u8 sense[SCSI_SENSE_BUFFERSIZE];
if (copy_from_user(&hdr, uarg, sizeof(hdr)))
return -EFAULT;
- rq = bsg_map_hdr(bd, &hdr, file->f_mode & FMODE_WRITE);
+ rq = bsg_map_hdr(bd, &hdr, file->f_mode & FMODE_WRITE, sense);
if (IS_ERR(rq))
return PTR_ERR(rq);
diff --git a/block/genhd.c b/block/genhd.c
index 397960c..e1eadcc 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -1087,6 +1087,14 @@
if (strcmp(dev_name(dev), name))
continue;
+ if (partno < disk->minors) {
+ /* We need to return the right devno, even
+ * if the partition doesn't exist yet.
+ */
+ devt = MKDEV(MAJOR(dev->devt),
+ MINOR(dev->devt) + partno);
+ break;
+ }
part = disk_get_part(disk, partno);
if (part) {
devt = part_devt(part);
diff --git a/crypto/lrw.c b/crypto/lrw.c
index 8ef664e..358f80b 100644
--- a/crypto/lrw.c
+++ b/crypto/lrw.c
@@ -45,7 +45,13 @@
static inline void setbit128_bbe(void *b, int bit)
{
- __set_bit(bit ^ 0x78, b);
+ __set_bit(bit ^ (0x80 -
+#ifdef __BIG_ENDIAN
+ BITS_PER_LONG
+#else
+ BITS_PER_BYTE
+#endif
+ ), b);
}
static int setkey(struct crypto_tfm *parent, const u8 *key,
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index a7799a9..8a851d0 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -254,13 +254,6 @@
help you correlate PCI bus addresses with the physical geography
of your slots. If you are unsure, say N.
-config ACPI_SYSTEM
- bool
- default y
- help
- This driver will enable your system to shut down using ACPI, and
- dump your ACPI DSDT table using /proc/acpi/dsdt.
-
config X86_PM_TIMER
bool "Power Management Timer Support" if EMBEDDED
depends on X86
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 65d90c7..b130ea0 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -52,7 +52,7 @@
obj-$(CONFIG_ACPI_CONTAINER) += container.o
obj-$(CONFIG_ACPI_THERMAL) += thermal.o
obj-y += power.o
-obj-$(CONFIG_ACPI_SYSTEM) += system.o event.o
+obj-y += system.o event.o
obj-$(CONFIG_ACPI_DEBUG) += debug.o
obj-$(CONFIG_ACPI_NUMA) += numa.o
obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 65132f9..69cbc57 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -138,6 +138,29 @@
static int acpi_battery_get_state(struct acpi_battery *battery);
+static int acpi_battery_is_charged(struct acpi_battery *battery)
+{
+ /* either charging or discharging */
+ if (battery->state != 0)
+ return 0;
+
+ /* battery not reporting charge */
+ if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN ||
+ battery->capacity_now == 0)
+ return 0;
+
+ /* good batteries update full_charge as the batteries degrade */
+ if (battery->full_charge_capacity == battery->capacity_now)
+ return 1;
+
+ /* fallback to using design values for broken batteries */
+ if (battery->design_capacity == battery->capacity_now)
+ return 1;
+
+ /* we don't do any sort of metric based on percentages */
+ return 0;
+}
+
static int acpi_battery_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
@@ -155,7 +178,7 @@
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
else if (battery->state & 0x02)
val->intval = POWER_SUPPLY_STATUS_CHARGING;
- else if (battery->state == 0)
+ else if (acpi_battery_is_charged(battery))
val->intval = POWER_SUPPLY_STATUS_FULL;
else
val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 0b299b0..714cb04 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -773,18 +773,32 @@
else
iowrite32_rep(data_addr, buf, words);
+ /* Transfer trailing bytes, if any */
if (unlikely(slop)) {
- __le32 pad;
+ unsigned char pad[4];
+
+ /* Point buf to the tail of buffer */
+ buf += buflen - slop;
+
+ /*
+ * Use io*_rep() accessors here as well to avoid pointlessly
+ * swapping bytes to and fro on the big endian machines...
+ */
if (rw == READ) {
- pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
- memcpy(buf + buflen - slop, &pad, slop);
+ if (slop < 3)
+ ioread16_rep(data_addr, pad, 1);
+ else
+ ioread32_rep(data_addr, pad, 1);
+ memcpy(buf, pad, slop);
} else {
- memcpy(&pad, buf + buflen - slop, slop);
- iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
+ memcpy(pad, buf, slop);
+ if (slop < 3)
+ iowrite16_rep(data_addr, pad, 1);
+ else
+ iowrite32_rep(data_addr, pad, 1);
}
- words++;
}
- return words << 2;
+ return (buflen + 1) & ~1;
}
EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 79a6c9a..ba556d3 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -110,7 +110,8 @@
{ "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
- { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES},
+ { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
+ { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
{ "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
@@ -593,6 +594,7 @@
#endif
static const struct pci_device_id via[] = {
+ { PCI_VDEVICE(VIA, 0x0415), },
{ PCI_VDEVICE(VIA, 0x0571), },
{ PCI_VDEVICE(VIA, 0x0581), },
{ PCI_VDEVICE(VIA, 0x1571), },
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 444af04..55a8eed 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -421,19 +421,21 @@
.hardreset = ATA_OP_NULL,
};
-/* OSDL bz3352 reports that nf2/3 controllers can't determine device
- * signature reliably. Also, the following thread reports detection
- * failure on cold boot with the standard debouncing timing.
+/* nf2 is ripe with hardreset related problems.
+ *
+ * kernel bz#3352 reports nf2/3 controllers can't determine device
+ * signature reliably. The following thread reports detection failure
+ * on cold boot with the standard debouncing timing.
*
* http://thread.gmane.org/gmane.linux.ide/34098
*
- * Debounce with hotplug timing and request follow-up SRST.
+ * And bz#12176 reports that hardreset simply doesn't work on nf2.
+ * Give up on it and just don't do hardreset.
*/
static struct ata_port_operations nv_nf2_ops = {
- .inherits = &nv_common_ops,
+ .inherits = &nv_generic_ops,
.freeze = nv_nf2_freeze,
.thaw = nv_nf2_thaw,
- .hardreset = nv_noclassify_hardreset,
};
/* For initial probing after boot and hot plugging, hardreset mostly
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 315bed8..1352312 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -18,9 +18,11 @@
*/
#include <linux/device.h>
+#include <linux/delay.h>
#include <linux/module.h>
#include <linux/kthread.h>
#include <linux/wait.h>
+#include <linux/async.h>
#include "base.h"
#include "power/power.h"
@@ -168,6 +170,21 @@
}
/**
+ * wait_for_device_probe
+ * Wait for device probing to be completed.
+ *
+ * Note: this function polls at 100 msec intervals.
+ */
+int wait_for_device_probe(void)
+{
+ /* wait for the known devices to complete their probing */
+ while (driver_probe_done() != 0)
+ msleep(100);
+ async_synchronize_full();
+ return 0;
+}
+
+/**
* driver_probe_device - attempt to bind device & driver together
* @drv: driver to bind a device to
* @dev: device to try to bind to the driver
diff --git a/drivers/block/aoe/aoe.h b/drivers/block/aoe/aoe.h
index c237527..5e41e6d 100644
--- a/drivers/block/aoe/aoe.h
+++ b/drivers/block/aoe/aoe.h
@@ -18,6 +18,7 @@
enum {
AOECMD_ATA,
AOECMD_CFG,
+ AOECMD_VEND_MIN = 0xf0,
AOEFL_RSP = (1<<3),
AOEFL_ERR = (1<<2),
diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c
index 30de5b1..c6099ba 100644
--- a/drivers/block/aoe/aoenet.c
+++ b/drivers/block/aoe/aoenet.c
@@ -142,6 +142,8 @@
aoecmd_cfg_rsp(skb);
break;
default:
+ if (h->cmd >= AOECMD_VEND_MIN)
+ break; /* don't complain about vendor commands */
printk(KERN_INFO "aoe: unknown cmd %d\n", h->cmd);
}
exit:
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 01e6938..d2cb67b 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3390,6 +3390,203 @@
kfree(p);
}
+/* Send a message CDB to the firmware. */
+static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, unsigned char type)
+{
+ typedef struct {
+ CommandListHeader_struct CommandHeader;
+ RequestBlock_struct Request;
+ ErrDescriptor_struct ErrorDescriptor;
+ } Command;
+ static const size_t cmd_sz = sizeof(Command) + sizeof(ErrorInfo_struct);
+ Command *cmd;
+ dma_addr_t paddr64;
+ uint32_t paddr32, tag;
+ void __iomem *vaddr;
+ int i, err;
+
+ vaddr = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+ if (vaddr == NULL)
+ return -ENOMEM;
+
+ /* The Inbound Post Queue only accepts 32-bit physical addresses for the
+ CCISS commands, so they must be allocated from the lower 4GiB of
+ memory. */
+ err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (err) {
+ iounmap(vaddr);
+ return -ENOMEM;
+ }
+
+ cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64);
+ if (cmd == NULL) {
+ iounmap(vaddr);
+ return -ENOMEM;
+ }
+
+ /* This must fit, because of the 32-bit consistent DMA mask. Also,
+ although there's no guarantee, we assume that the address is at
+ least 4-byte aligned (most likely, it's page-aligned). */
+ paddr32 = paddr64;
+
+ cmd->CommandHeader.ReplyQueue = 0;
+ cmd->CommandHeader.SGList = 0;
+ cmd->CommandHeader.SGTotal = 0;
+ cmd->CommandHeader.Tag.lower = paddr32;
+ cmd->CommandHeader.Tag.upper = 0;
+ memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8);
+
+ cmd->Request.CDBLen = 16;
+ cmd->Request.Type.Type = TYPE_MSG;
+ cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE;
+ cmd->Request.Type.Direction = XFER_NONE;
+ cmd->Request.Timeout = 0; /* Don't time out */
+ cmd->Request.CDB[0] = opcode;
+ cmd->Request.CDB[1] = type;
+ memset(&cmd->Request.CDB[2], 0, 14); /* the rest of the CDB is reserved */
+
+ cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(Command);
+ cmd->ErrorDescriptor.Addr.upper = 0;
+ cmd->ErrorDescriptor.Len = sizeof(ErrorInfo_struct);
+
+ writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET);
+
+ for (i = 0; i < 10; i++) {
+ tag = readl(vaddr + SA5_REPLY_PORT_OFFSET);
+ if ((tag & ~3) == paddr32)
+ break;
+ schedule_timeout_uninterruptible(HZ);
+ }
+
+ iounmap(vaddr);
+
+ /* we leak the DMA buffer here ... no choice since the controller could
+ still complete the command. */
+ if (i == 10) {
+ printk(KERN_ERR "cciss: controller message %02x:%02x timed out\n",
+ opcode, type);
+ return -ETIMEDOUT;
+ }
+
+ pci_free_consistent(pdev, cmd_sz, cmd, paddr64);
+
+ if (tag & 2) {
+ printk(KERN_ERR "cciss: controller message %02x:%02x failed\n",
+ opcode, type);
+ return -EIO;
+ }
+
+ printk(KERN_INFO "cciss: controller message %02x:%02x succeeded\n",
+ opcode, type);
+ return 0;
+}
+
+#define cciss_soft_reset_controller(p) cciss_message(p, 1, 0)
+#define cciss_noop(p) cciss_message(p, 3, 0)
+
+static __devinit int cciss_reset_msi(struct pci_dev *pdev)
+{
+/* the #defines are stolen from drivers/pci/msi.h. */
+#define msi_control_reg(base) (base + PCI_MSI_FLAGS)
+#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
+
+ int pos;
+ u16 control = 0;
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
+ if (pos) {
+ pci_read_config_word(pdev, msi_control_reg(pos), &control);
+ if (control & PCI_MSI_FLAGS_ENABLE) {
+ printk(KERN_INFO "cciss: resetting MSI\n");
+ pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE);
+ }
+ }
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
+ if (pos) {
+ pci_read_config_word(pdev, msi_control_reg(pos), &control);
+ if (control & PCI_MSIX_FLAGS_ENABLE) {
+ printk(KERN_INFO "cciss: resetting MSI-X\n");
+ pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE);
+ }
+ }
+
+ return 0;
+}
+
+/* This does a hard reset of the controller using PCI power management
+ * states. */
+static __devinit int cciss_hard_reset_controller(struct pci_dev *pdev)
+{
+ u16 pmcsr, saved_config_space[32];
+ int i, pos;
+
+ printk(KERN_INFO "cciss: using PCI PM to reset controller\n");
+
+ /* This is very nearly the same thing as
+
+ pci_save_state(pci_dev);
+ pci_set_power_state(pci_dev, PCI_D3hot);
+ pci_set_power_state(pci_dev, PCI_D0);
+ pci_restore_state(pci_dev);
+
+ but we can't use these nice canned kernel routines on
+ kexec, because they also check the MSI/MSI-X state in PCI
+ configuration space and do the wrong thing when it is
+ set/cleared. Also, the pci_save/restore_state functions
+ violate the ordering requirements for restoring the
+ configuration space from the CCISS document (see the
+ comment below). So we roll our own .... */
+
+ for (i = 0; i < 32; i++)
+ pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (pos == 0) {
+ printk(KERN_ERR "cciss_reset_controller: PCI PM not supported\n");
+ return -ENODEV;
+ }
+
+ /* Quoting from the Open CISS Specification: "The Power
+ * Management Control/Status Register (CSR) controls the power
+ * state of the device. The normal operating state is D0,
+ * CSR=00h. The software off state is D3, CSR=03h. To reset
+ * the controller, place the interface device in D3 then to
+ * D0, this causes a secondary PCI reset which will reset the
+ * controller." */
+
+ /* enter the D3hot power management state */
+ pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ pmcsr |= PCI_D3hot;
+ pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+
+ schedule_timeout_uninterruptible(HZ >> 1);
+
+ /* enter the D0 power management state */
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ pmcsr |= PCI_D0;
+ pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+
+ schedule_timeout_uninterruptible(HZ >> 1);
+
+ /* Restore the PCI configuration space. The Open CISS
+ * Specification says, "Restore the PCI Configuration
+ * Registers, offsets 00h through 60h. It is important to
+ * restore the command register, 16-bits at offset 04h,
+ * last. Do not restore the configuration status register,
+ * 16-bits at offset 06h." Note that the offset is 2*i. */
+ for (i = 0; i < 32; i++) {
+ if (i == 2 || i == 3)
+ continue;
+ pci_write_config_word(pdev, 2*i, saved_config_space[i]);
+ }
+ wmb();
+ pci_write_config_word(pdev, 4, saved_config_space[2]);
+
+ return 0;
+}
+
/*
* This is it. Find all the controllers and register them. I really hate
* stealing all these major device numbers.
@@ -3404,6 +3601,24 @@
int dac, return_code;
InquiryData_struct *inq_buff = NULL;
+ if (reset_devices) {
+ /* Reset the controller with a PCI power-cycle */
+ if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev))
+ return -ENODEV;
+
+ /* Some devices (notably the HP Smart Array 5i Controller)
+ need a little pause here */
+ schedule_timeout_uninterruptible(30*HZ);
+
+ /* Now try to get the controller to respond to a no-op */
+ for (i=0; i<12; i++) {
+ if (cciss_noop(pdev) == 0)
+ break;
+ else
+ printk("cciss: no-op failed%s\n", (i < 11 ? "; re-trying" : ""));
+ }
+ }
+
i = alloc_cciss_hba();
if (i < 0)
return -1;
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index cf29cc4..83d8ed3 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -558,6 +558,8 @@
static void recalibrate_floppy(void);
static void floppy_shutdown(unsigned long);
+static int floppy_request_regions(int);
+static void floppy_release_regions(int);
static int floppy_grab_irq_and_dma(void);
static void floppy_release_irq_and_dma(void);
@@ -4274,8 +4276,7 @@
FDCS->rawcmd = 2;
if (user_reset_fdc(-1, FD_RESET_ALWAYS, 0)) {
/* free ioports reserved by floppy_grab_irq_and_dma() */
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
+ floppy_release_regions(fdc);
FDCS->address = -1;
FDCS->version = FDC_NONE;
continue;
@@ -4284,8 +4285,7 @@
FDCS->version = get_fdc_version();
if (FDCS->version == FDC_NONE) {
/* free ioports reserved by floppy_grab_irq_and_dma() */
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
+ floppy_release_regions(fdc);
FDCS->address = -1;
continue;
}
@@ -4358,6 +4358,47 @@
static DEFINE_SPINLOCK(floppy_usage_lock);
+static const struct io_region {
+ int offset;
+ int size;
+} io_regions[] = {
+ { 2, 1 },
+ /* address + 3 is sometimes reserved by pnp bios for motherboard */
+ { 4, 2 },
+ /* address + 6 is reserved, and may be taken by IDE.
+ * Unfortunately, Adaptec doesn't know this :-(, */
+ { 7, 1 },
+};
+
+static void floppy_release_allocated_regions(int fdc, const struct io_region *p)
+{
+ while (p != io_regions) {
+ p--;
+ release_region(FDCS->address + p->offset, p->size);
+ }
+}
+
+#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)]))
+
+static int floppy_request_regions(int fdc)
+{
+ const struct io_region *p;
+
+ for (p = io_regions; p < ARRAY_END(io_regions); p++) {
+ if (!request_region(FDCS->address + p->offset, p->size, "floppy")) {
+ DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address + p->offset);
+ floppy_release_allocated_regions(fdc, p);
+ return -EBUSY;
+ }
+ }
+ return 0;
+}
+
+static void floppy_release_regions(int fdc)
+{
+ floppy_release_allocated_regions(fdc, ARRAY_END(io_regions));
+}
+
static int floppy_grab_irq_and_dma(void)
{
unsigned long flags;
@@ -4399,18 +4440,8 @@
for (fdc = 0; fdc < N_FDC; fdc++) {
if (FDCS->address != -1) {
- if (!request_region(FDCS->address + 2, 4, "floppy")) {
- DPRINT("Floppy io-port 0x%04lx in use\n",
- FDCS->address + 2);
- goto cleanup1;
- }
- if (!request_region(FDCS->address + 7, 1, "floppy DIR")) {
- DPRINT("Floppy io-port 0x%04lx in use\n",
- FDCS->address + 7);
- goto cleanup2;
- }
- /* address + 6 is reserved, and may be taken by IDE.
- * Unfortunately, Adaptec doesn't know this :-(, */
+ if (floppy_request_regions(fdc))
+ goto cleanup;
}
}
for (fdc = 0; fdc < N_FDC; fdc++) {
@@ -4432,15 +4463,11 @@
fdc = 0;
irqdma_allocated = 1;
return 0;
-cleanup2:
- release_region(FDCS->address + 2, 4);
-cleanup1:
+cleanup:
fd_free_irq();
fd_free_dma();
- while (--fdc >= 0) {
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
- }
+ while (--fdc >= 0)
+ floppy_release_regions(fdc);
spin_lock_irqsave(&floppy_usage_lock, flags);
usage_count--;
spin_unlock_irqrestore(&floppy_usage_lock, flags);
@@ -4501,10 +4528,8 @@
#endif
old_fdc = fdc;
for (fdc = 0; fdc < N_FDC; fdc++)
- if (FDCS->address != -1) {
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
- }
+ if (FDCS->address != -1)
+ floppy_release_regions(fdc);
fdc = old_fdc;
}
diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c
index 9dfa271..c397b3d 100644
--- a/drivers/block/paride/pg.c
+++ b/drivers/block/paride/pg.c
@@ -422,7 +422,7 @@
for (k = 0; k < len; k++) {
char c = *buf++;
- if (c != ' ' || c != l)
+ if (c != ' ' && c != l)
l = *targ++ = c;
}
if (l == ' ')
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index f146e90..518f2a2 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -1746,9 +1746,10 @@
sx_dprintk(SX_DEBUG_FIRMWARE, "returning type= %ld\n", rc);
break;
case SXIO_DO_RAMTEST:
- if (sx_initialized) /* Already initialized: better not ramtest the board. */
+ if (sx_initialized) { /* Already initialized: better not ramtest the board. */
rc = -EPERM;
break;
+ }
if (IS_SX_BOARD(board)) {
rc = do_memtest(board, 0, 0x7000);
if (!rc)
@@ -1788,7 +1789,7 @@
nbytes - i : SX_CHUNK_SIZE)) {
kfree(tmp);
rc = -EFAULT;
- break;
+ goto out;
}
memcpy_toio(board->base2 + offset + i, tmp,
(i + SX_CHUNK_SIZE > nbytes) ?
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index a589930..280a9d2 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -518,6 +518,7 @@
dma_chan_name(chan), err);
else
break;
+ chan->private = NULL;
chan = NULL;
}
}
@@ -536,6 +537,7 @@
WARN_ONCE(chan->client_count != 1,
"chan reference count %d != 1\n", chan->client_count);
dma_chan_put(chan);
+ chan->private = NULL;
mutex_unlock(&dma_list_mutex);
}
EXPORT_SYMBOL_GPL(dma_release_channel);
diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
index 6b702cc..a97c07e 100644
--- a/drivers/dma/dw_dmac.c
+++ b/drivers/dma/dw_dmac.c
@@ -560,7 +560,7 @@
unsigned long flags)
{
struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
- struct dw_dma_slave *dws = dwc->dws;
+ struct dw_dma_slave *dws = chan->private;
struct dw_desc *prev;
struct dw_desc *first;
u32 ctllo;
@@ -790,7 +790,7 @@
cfghi = DWC_CFGH_FIFO_MODE;
cfglo = 0;
- dws = dwc->dws;
+ dws = chan->private;
if (dws) {
/*
* We need controller-specific data to set up slave
@@ -866,7 +866,6 @@
spin_lock_bh(&dwc->lock);
list_splice_init(&dwc->free_list, &list);
dwc->descs_allocated = 0;
- dwc->dws = NULL;
/* Disable interrupts */
channel_clear_bit(dw, MASK.XFER, dwc->mask);
diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h
index 00fdd18..b252b20 100644
--- a/drivers/dma/dw_dmac_regs.h
+++ b/drivers/dma/dw_dmac_regs.h
@@ -139,8 +139,6 @@
struct list_head queue;
struct list_head free_list;
- struct dw_dma_slave *dws;
-
unsigned int descs_allocated;
};
diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c
index 261b9aa..05aa2d4 100644
--- a/drivers/firmware/memmap.c
+++ b/drivers/firmware/memmap.c
@@ -1,7 +1,7 @@
/*
* linux/drivers/firmware/memmap.c
* Copyright (C) 2008 SUSE LINUX Products GmbH
- * by Bernhard Walle <bwalle@suse.de>
+ * by Bernhard Walle <bernhard.walle@gmx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License v2.0 as published by
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 4be3acb..3a22eb9 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -80,18 +80,17 @@
XFree86 4.4 and above. If unsure, build this and i830 as modules and
the X server will load the correct one.
-endchoice
-
config DRM_I915_KMS
bool "Enable modesetting on intel by default"
depends on DRM_I915
help
- Choose this option if you want kernel modesetting enabled by default,
- and you have a new enough userspace to support this. Running old
- userspaces with this enabled will cause pain. Note that this causes
- the driver to bind to PCI devices, which precludes loading things
- like intelfb.
+ Choose this option if you want kernel modesetting enabled by default,
+ and you have a new enough userspace to support this. Running old
+ userspaces with this enabled will cause pain. Note that this causes
+ the driver to bind to PCI devices, which precludes loading things
+ like intelfb.
+endchoice
config DRM_MGA
tristate "Matrox g200/g400"
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index bfce099..94a7688 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -1741,9 +1741,8 @@
* RETURNS:
* Zero on success, errno on failure.
*/
-void drm_fb_release(struct file *filp)
+void drm_fb_release(struct drm_file *priv)
{
- struct drm_file *priv = filp->private_data;
struct drm_device *dev = priv->minor->dev;
struct drm_framebuffer *fb, *tfb;
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 964c5eb..733028b 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -512,8 +512,8 @@
if (drm_mode_equal(&saved_mode, &crtc->mode)) {
if (saved_x != crtc->x || saved_y != crtc->y ||
depth_changed || bpp_changed) {
- crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y,
- old_fb);
+ ret = !crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y,
+ old_fb);
goto done;
}
}
@@ -552,7 +552,9 @@
/* Set up the DPLL and any encoders state that needs to adjust or depend
* on the DPLL.
*/
- crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
+ ret = !crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
+ if (!ret)
+ goto done;
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
@@ -752,6 +754,8 @@
if (!drm_crtc_helper_set_mode(set->crtc, set->mode,
set->x, set->y,
old_fb)) {
+ DRM_ERROR("failed to set mode on crtc %p\n",
+ set->crtc);
ret = -EINVAL;
goto fail_set_mode;
}
@@ -765,7 +769,10 @@
old_fb = set->crtc->fb;
if (set->crtc->fb != set->fb)
set->crtc->fb = set->fb;
- crtc_funcs->mode_set_base(set->crtc, set->x, set->y, old_fb);
+ ret = crtc_funcs->mode_set_base(set->crtc,
+ set->x, set->y, old_fb);
+ if (ret != 0)
+ goto fail_set_mode;
}
kfree(save_encoders);
@@ -775,8 +782,12 @@
fail_set_mode:
set->crtc->enabled = save_enabled;
count = 0;
- list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ if (!connector->encoder)
+ continue;
+
connector->encoder->crtc = save_crtcs[count++];
+ }
fail_no_encoder:
kfree(save_crtcs);
count = 0;
diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c
index b06a537..6c020fe 100644
--- a/drivers/gpu/drm/drm_fops.c
+++ b/drivers/gpu/drm/drm_fops.c
@@ -457,6 +457,9 @@
if (dev->driver->driver_features & DRIVER_GEM)
drm_gem_release(dev, file_priv);
+ if (dev->driver->driver_features & DRIVER_MODESET)
+ drm_fb_release(file_priv);
+
mutex_lock(&dev->ctxlist_mutex);
if (!list_empty(&dev->ctxlist)) {
struct drm_ctx_list *pos, *n;
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index 6915fb8..88d3368 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -104,8 +104,8 @@
if (drm_mm_init(&mm->offset_manager, DRM_FILE_PAGE_OFFSET_START,
DRM_FILE_PAGE_OFFSET_SIZE)) {
- drm_free(mm, sizeof(struct drm_gem_mm), DRM_MEM_MM);
drm_ht_remove(&mm->offset_hash);
+ drm_free(mm, sizeof(struct drm_gem_mm), DRM_MEM_MM);
return -ENOMEM;
}
@@ -295,35 +295,37 @@
return -EBADF;
again:
- if (idr_pre_get(&dev->object_name_idr, GFP_KERNEL) == 0)
- return -ENOMEM;
+ if (idr_pre_get(&dev->object_name_idr, GFP_KERNEL) == 0) {
+ ret = -ENOMEM;
+ goto err;
+ }
spin_lock(&dev->object_name_lock);
- if (obj->name) {
- args->name = obj->name;
+ if (!obj->name) {
+ ret = idr_get_new_above(&dev->object_name_idr, obj, 1,
+ &obj->name);
+ args->name = (uint64_t) obj->name;
spin_unlock(&dev->object_name_lock);
- return 0;
- }
- ret = idr_get_new_above(&dev->object_name_idr, obj, 1,
- &obj->name);
- spin_unlock(&dev->object_name_lock);
- if (ret == -EAGAIN)
- goto again;
- if (ret != 0) {
- mutex_lock(&dev->struct_mutex);
- drm_gem_object_unreference(obj);
- mutex_unlock(&dev->struct_mutex);
- return ret;
+ if (ret == -EAGAIN)
+ goto again;
+
+ if (ret != 0)
+ goto err;
+
+ /* Allocate a reference for the name table. */
+ drm_gem_object_reference(obj);
+ } else {
+ args->name = (uint64_t) obj->name;
+ spin_unlock(&dev->object_name_lock);
+ ret = 0;
}
- /*
- * Leave the reference from the lookup around as the
- * name table now holds one
- */
- args->name = (uint64_t) obj->name;
-
- return 0;
+err:
+ mutex_lock(&dev->struct_mutex);
+ drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
+ return ret;
}
/**
@@ -448,6 +450,7 @@
spin_lock(&dev->object_name_lock);
if (obj->name) {
idr_remove(&dev->object_name_idr, obj->name);
+ obj->name = 0;
spin_unlock(&dev->object_name_lock);
/*
* The object name held a reference to this object, drop
@@ -460,6 +463,26 @@
}
EXPORT_SYMBOL(drm_gem_object_handle_free);
+void drm_gem_vm_open(struct vm_area_struct *vma)
+{
+ struct drm_gem_object *obj = vma->vm_private_data;
+
+ drm_gem_object_reference(obj);
+}
+EXPORT_SYMBOL(drm_gem_vm_open);
+
+void drm_gem_vm_close(struct vm_area_struct *vma)
+{
+ struct drm_gem_object *obj = vma->vm_private_data;
+ struct drm_device *dev = obj->dev;
+
+ mutex_lock(&dev->struct_mutex);
+ drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
+}
+EXPORT_SYMBOL(drm_gem_vm_close);
+
+
/**
* drm_gem_mmap - memory map routine for GEM objects
* @filp: DRM file pointer
@@ -521,6 +544,14 @@
#endif
vma->vm_page_prot = __pgprot(prot);
+ /* Take a ref for this mapping of the object, so that the fault
+ * handler can dereference the mmap offset's pointer to the object.
+ * This reference is cleaned up by the corresponding vm_close
+ * (which should happen whether the vma was created by this call, or
+ * by a vm_open due to mremap or partial unmap or whatever).
+ */
+ drm_gem_object_reference(obj);
+
vma->vm_file = filp; /* Needed for drm_vm_open() */
drm_vm_open_locked(vma);
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index aac12ee..a31cbdb 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -94,6 +94,8 @@
static struct vm_operations_struct i915_gem_vm_ops = {
.fault = i915_gem_fault,
+ .open = drm_gem_vm_open,
+ .close = drm_gem_vm_close,
};
static struct drm_driver driver = {
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7325363..135a08f 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -184,6 +184,8 @@
unsigned int lvds_dither:1;
unsigned int lvds_vbt:1;
unsigned int int_crt_support:1;
+ unsigned int lvds_use_ssc:1;
+ int lvds_ssc_freq;
struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 8185766..ac534c9 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -607,8 +607,6 @@
case -EAGAIN:
return VM_FAULT_OOM;
case -EFAULT:
- case -EBUSY:
- DRM_ERROR("can't insert pfn?? fault or busy...\n");
return VM_FAULT_SIGBUS;
default:
return VM_FAULT_NOPAGE;
@@ -684,6 +682,30 @@
return ret;
}
+static void
+i915_gem_free_mmap_offset(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_gem_mm *mm = dev->mm_private;
+ struct drm_map_list *list;
+
+ list = &obj->map_list;
+ drm_ht_remove_item(&mm->offset_hash, &list->hash);
+
+ if (list->file_offset_node) {
+ drm_mm_put_block(list->file_offset_node);
+ list->file_offset_node = NULL;
+ }
+
+ if (list->map) {
+ drm_free(list->map, sizeof(struct drm_map), DRM_MEM_DRIVER);
+ list->map = NULL;
+ }
+
+ obj_priv->mmap_offset = 0;
+}
+
/**
* i915_gem_get_gtt_alignment - return required GTT alignment for an object
* @obj: object to check
@@ -758,8 +780,11 @@
if (!obj_priv->mmap_offset) {
ret = i915_gem_create_mmap_offset(obj);
- if (ret)
+ if (ret) {
+ drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
return ret;
+ }
}
args->offset = obj_priv->mmap_offset;
@@ -2251,6 +2276,8 @@
(int) reloc.offset,
reloc.read_domains,
reloc.write_domain);
+ drm_gem_object_unreference(target_obj);
+ i915_gem_object_unpin(obj);
return -EINVAL;
}
@@ -2480,13 +2507,15 @@
if (dev_priv->mm.wedged) {
DRM_ERROR("Execbuf while wedged\n");
mutex_unlock(&dev->struct_mutex);
- return -EIO;
+ ret = -EIO;
+ goto pre_mutex_err;
}
if (dev_priv->mm.suspended) {
DRM_ERROR("Execbuf while VT-switched.\n");
mutex_unlock(&dev->struct_mutex);
- return -EBUSY;
+ ret = -EBUSY;
+ goto pre_mutex_err;
}
/* Look up object handles */
@@ -2632,15 +2661,6 @@
i915_verify_inactive(dev, __FILE__, __LINE__);
- /* Copy the new buffer offsets back to the user's exec list. */
- ret = copy_to_user((struct drm_i915_relocation_entry __user *)
- (uintptr_t) args->buffers_ptr,
- exec_list,
- sizeof(*exec_list) * args->buffer_count);
- if (ret)
- DRM_ERROR("failed to copy %d exec entries "
- "back to user (%d)\n",
- args->buffer_count, ret);
err:
for (i = 0; i < pinned; i++)
i915_gem_object_unpin(object_list[i]);
@@ -2650,6 +2670,18 @@
mutex_unlock(&dev->struct_mutex);
+ if (!ret) {
+ /* Copy the new buffer offsets back to the user's exec list. */
+ ret = copy_to_user((struct drm_i915_relocation_entry __user *)
+ (uintptr_t) args->buffers_ptr,
+ exec_list,
+ sizeof(*exec_list) * args->buffer_count);
+ if (ret)
+ DRM_ERROR("failed to copy %d exec entries "
+ "back to user (%d)\n",
+ args->buffer_count, ret);
+ }
+
pre_mutex_err:
drm_free(object_list, sizeof(*object_list) * args->buffer_count,
DRM_MEM_DRIVER);
@@ -2753,6 +2785,7 @@
if (obj_priv->pin_filp != NULL && obj_priv->pin_filp != file_priv) {
DRM_ERROR("Already pinned in i915_gem_pin_ioctl(): %d\n",
args->handle);
+ drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
return -EINVAL;
}
@@ -2885,9 +2918,6 @@
void i915_gem_free_object(struct drm_gem_object *obj)
{
struct drm_device *dev = obj->dev;
- struct drm_gem_mm *mm = dev->mm_private;
- struct drm_map_list *list;
- struct drm_map *map;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
while (obj_priv->pin_count > 0)
@@ -2898,19 +2928,7 @@
i915_gem_object_unbind(obj);
- list = &obj->map_list;
- drm_ht_remove_item(&mm->offset_hash, &list->hash);
-
- if (list->file_offset_node) {
- drm_mm_put_block(list->file_offset_node);
- list->file_offset_node = NULL;
- }
-
- map = list->map;
- if (map) {
- drm_free(map, sizeof(*map), DRM_MEM_DRIVER);
- list->map = NULL;
- }
+ i915_gem_free_mmap_offset(obj);
drm_free(obj_priv->page_cpu_valid, 1, DRM_MEM_DRIVER);
drm_free(obj->driver_private, 1, DRM_MEM_DRIVER);
@@ -3095,6 +3113,7 @@
if (dev_priv->hw_status_page == NULL) {
DRM_ERROR("Failed to map status page.\n");
memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
+ i915_gem_object_unpin(obj);
drm_gem_object_unreference(obj);
return -EINVAL;
}
@@ -3107,6 +3126,27 @@
return 0;
}
+static void
+i915_gem_cleanup_hws(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_gem_object *obj = dev_priv->hws_obj;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+ if (dev_priv->hws_obj == NULL)
+ return;
+
+ kunmap(obj_priv->page_list[0]);
+ i915_gem_object_unpin(obj);
+ drm_gem_object_unreference(obj);
+ dev_priv->hws_obj = NULL;
+ memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
+ dev_priv->hw_status_page = NULL;
+
+ /* Write high address into HWS_PGA when disabling. */
+ I915_WRITE(HWS_PGA, 0x1ffff000);
+}
+
int
i915_gem_init_ringbuffer(struct drm_device *dev)
{
@@ -3124,6 +3164,7 @@
obj = drm_gem_object_alloc(dev, 128 * 1024);
if (obj == NULL) {
DRM_ERROR("Failed to allocate ringbuffer\n");
+ i915_gem_cleanup_hws(dev);
return -ENOMEM;
}
obj_priv = obj->driver_private;
@@ -3131,6 +3172,7 @@
ret = i915_gem_object_pin(obj, 4096);
if (ret != 0) {
drm_gem_object_unreference(obj);
+ i915_gem_cleanup_hws(dev);
return ret;
}
@@ -3148,7 +3190,9 @@
if (ring->map.handle == NULL) {
DRM_ERROR("Failed to map ringbuffer.\n");
memset(&dev_priv->ring, 0, sizeof(dev_priv->ring));
+ i915_gem_object_unpin(obj);
drm_gem_object_unreference(obj);
+ i915_gem_cleanup_hws(dev);
return -EINVAL;
}
ring->ring_obj = obj;
@@ -3228,20 +3272,7 @@
dev_priv->ring.ring_obj = NULL;
memset(&dev_priv->ring, 0, sizeof(dev_priv->ring));
- if (dev_priv->hws_obj != NULL) {
- struct drm_gem_object *obj = dev_priv->hws_obj;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
-
- kunmap(obj_priv->page_list[0]);
- i915_gem_object_unpin(obj);
- drm_gem_object_unreference(obj);
- dev_priv->hws_obj = NULL;
- memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
- dev_priv->hw_status_page = NULL;
-
- /* Write high address into HWS_PGA when disabling. */
- I915_WRITE(HWS_PGA, 0x1ffff000);
- }
+ i915_gem_cleanup_hws(dev);
}
int
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index fa1685c..7fb4191 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -299,9 +299,8 @@
}
obj_priv->stride = args->stride;
- mutex_unlock(&dev->struct_mutex);
-
drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
return 0;
}
@@ -340,9 +339,8 @@
DRM_ERROR("unknown tiling mode\n");
}
- mutex_unlock(&dev->struct_mutex);
-
drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
return 0;
}
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 4ca82a0..65be30d 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -135,6 +135,14 @@
if (general) {
dev_priv->int_tv_support = general->int_tv_support;
dev_priv->int_crt_support = general->int_crt_support;
+ dev_priv->lvds_use_ssc = general->enable_ssc;
+
+ if (dev_priv->lvds_use_ssc) {
+ if (IS_I855(dev_priv->dev))
+ dev_priv->lvds_ssc_freq = general->ssc_freq ? 66 : 48;
+ else
+ dev_priv->lvds_ssc_freq = general->ssc_freq ? 100 : 96;
+ }
}
}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index bbdd729..4d2baf7 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -90,12 +90,12 @@
#define I9XX_DOT_MAX 400000
#define I9XX_VCO_MIN 1400000
#define I9XX_VCO_MAX 2800000
-#define I9XX_N_MIN 3
-#define I9XX_N_MAX 8
+#define I9XX_N_MIN 1
+#define I9XX_N_MAX 6
#define I9XX_M_MIN 70
#define I9XX_M_MAX 120
#define I9XX_M1_MIN 10
-#define I9XX_M1_MAX 20
+#define I9XX_M1_MAX 22
#define I9XX_M2_MIN 5
#define I9XX_M2_MAX 9
#define I9XX_P_SDVO_DAC_MIN 5
@@ -189,9 +189,7 @@
return limit;
}
-/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
-
-static void i8xx_clock(int refclk, intel_clock_t *clock)
+static void intel_clock(int refclk, intel_clock_t *clock)
{
clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
clock->p = clock->p1 * clock->p2;
@@ -199,25 +197,6 @@
clock->dot = clock->vco / clock->p;
}
-/** Derive the pixel clock for the given refclk and divisors for 9xx chips. */
-
-static void i9xx_clock(int refclk, intel_clock_t *clock)
-{
- clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
- clock->p = clock->p1 * clock->p2;
- clock->vco = refclk * clock->m / (clock->n + 2);
- clock->dot = clock->vco / clock->p;
-}
-
-static void intel_clock(struct drm_device *dev, int refclk,
- intel_clock_t *clock)
-{
- if (IS_I9XX(dev))
- i9xx_clock (refclk, clock);
- else
- i8xx_clock (refclk, clock);
-}
-
/**
* Returns whether any output on the specified pipe is of the specified type
*/
@@ -238,7 +217,7 @@
return false;
}
-#define INTELPllInvalid(s) { /* ErrorF (s) */; return false; }
+#define INTELPllInvalid(s) do { DRM_DEBUG(s); return false; } while (0)
/**
* Returns whether the given set of divisors are valid for a given refclk with
* the given connectors.
@@ -318,7 +297,7 @@
clock.p1 <= limit->p1.max; clock.p1++) {
int this_err;
- intel_clock(dev, refclk, &clock);
+ intel_clock(refclk, &clock);
if (!intel_PLL_is_valid(crtc, &clock))
continue;
@@ -343,7 +322,7 @@
udelay(20000);
}
-static void
+static int
intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb)
{
@@ -361,11 +340,21 @@
int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
u32 dspcntr, alignment;
+ int ret;
/* no fb bound */
if (!crtc->fb) {
DRM_DEBUG("No FB bound\n");
- return;
+ return 0;
+ }
+
+ switch (pipe) {
+ case 0:
+ case 1:
+ break;
+ default:
+ DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
+ return -EINVAL;
}
intel_fb = to_intel_framebuffer(crtc->fb);
@@ -377,28 +366,30 @@
alignment = 64 * 1024;
break;
case I915_TILING_X:
- if (IS_I9XX(dev))
- alignment = 1024 * 1024;
- else
- alignment = 512 * 1024;
+ /* pin() will align the object as required by fence */
+ alignment = 0;
break;
case I915_TILING_Y:
/* FIXME: Is this true? */
DRM_ERROR("Y tiled not allowed for scan out buffers\n");
- return;
+ return -EINVAL;
default:
BUG();
}
- if (i915_gem_object_pin(intel_fb->obj, alignment))
- return;
+ mutex_lock(&dev->struct_mutex);
+ ret = i915_gem_object_pin(intel_fb->obj, alignment);
+ if (ret != 0) {
+ mutex_unlock(&dev->struct_mutex);
+ return ret;
+ }
- i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1);
-
- Start = obj_priv->gtt_offset;
- Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
-
- I915_WRITE(dspstride, crtc->fb->pitch);
+ ret = i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1);
+ if (ret != 0) {
+ i915_gem_object_unpin(intel_fb->obj);
+ mutex_unlock(&dev->struct_mutex);
+ return ret;
+ }
dspcntr = I915_READ(dspcntr_reg);
/* Mask out pixel format bits in case we change it */
@@ -419,11 +410,17 @@
break;
default:
DRM_ERROR("Unknown color depth\n");
- return;
+ i915_gem_object_unpin(intel_fb->obj);
+ mutex_unlock(&dev->struct_mutex);
+ return -EINVAL;
}
I915_WRITE(dspcntr_reg, dspcntr);
+ Start = obj_priv->gtt_offset;
+ Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
+
DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y);
+ I915_WRITE(dspstride, crtc->fb->pitch);
if (IS_I965G(dev)) {
I915_WRITE(dspbase, Offset);
I915_READ(dspbase);
@@ -440,27 +437,24 @@
intel_fb = to_intel_framebuffer(old_fb);
i915_gem_object_unpin(intel_fb->obj);
}
+ mutex_unlock(&dev->struct_mutex);
if (!dev->primary->master)
- return;
+ return 0;
master_priv = dev->primary->master->driver_priv;
if (!master_priv->sarea_priv)
- return;
+ return 0;
- switch (pipe) {
- case 0:
- master_priv->sarea_priv->pipeA_x = x;
- master_priv->sarea_priv->pipeA_y = y;
- break;
- case 1:
+ if (pipe) {
master_priv->sarea_priv->pipeB_x = x;
master_priv->sarea_priv->pipeB_y = y;
- break;
- default:
- DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
- break;
+ } else {
+ master_priv->sarea_priv->pipeA_x = x;
+ master_priv->sarea_priv->pipeA_y = y;
}
+
+ return 0;
}
@@ -708,11 +702,11 @@
return 1;
}
-static void intel_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
- int x, int y,
- struct drm_framebuffer *old_fb)
+static int intel_crtc_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -732,13 +726,14 @@
int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
- int refclk;
+ int refclk, num_outputs = 0;
intel_clock_t clock;
u32 dpll = 0, fp = 0, dspcntr, pipeconf;
bool ok, is_sdvo = false, is_dvo = false;
bool is_crt = false, is_lvds = false, is_tv = false;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_connector *connector;
+ int ret;
drm_vblank_pre_modeset(dev, pipe);
@@ -768,9 +763,14 @@
is_crt = true;
break;
}
+
+ num_outputs++;
}
- if (IS_I9XX(dev)) {
+ if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2) {
+ refclk = dev_priv->lvds_ssc_freq * 1000;
+ DRM_DEBUG("using SSC reference clock of %d MHz\n", refclk / 1000);
+ } else if (IS_I9XX(dev)) {
refclk = 96000;
} else {
refclk = 48000;
@@ -779,7 +779,7 @@
ok = intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, &clock);
if (!ok) {
DRM_ERROR("Couldn't find PLL settings for mode!\n");
- return;
+ return -EINVAL;
}
fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
@@ -829,11 +829,14 @@
}
}
- if (is_tv) {
+ if (is_sdvo && is_tv)
+ dpll |= PLL_REF_INPUT_TVCLKINBC;
+ else if (is_tv)
/* XXX: just matching BIOS for now */
-/* dpll |= PLL_REF_INPUT_TVCLKINBC; */
+ /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
dpll |= 3;
- }
+ else if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2)
+ dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
else
dpll |= PLL_REF_INPUT_DREFCLK;
@@ -950,9 +953,13 @@
I915_WRITE(dspcntr_reg, dspcntr);
/* Flush the plane changes */
- intel_pipe_set_base(crtc, x, y, old_fb);
+ ret = intel_pipe_set_base(crtc, x, y, old_fb);
+ if (ret != 0)
+ return ret;
drm_vblank_post_modeset(dev, pipe);
+
+ return 0;
}
/** Loads the palette/gamma unit for the CRTC with the prepared values */
@@ -1023,18 +1030,19 @@
}
/* we only need to pin inside GTT if cursor is non-phy */
+ mutex_lock(&dev->struct_mutex);
if (!dev_priv->cursor_needs_physical) {
ret = i915_gem_object_pin(bo, PAGE_SIZE);
if (ret) {
DRM_ERROR("failed to pin cursor bo\n");
- goto fail;
+ goto fail_locked;
}
addr = obj_priv->gtt_offset;
} else {
ret = i915_gem_attach_phys_object(dev, bo, (pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1);
if (ret) {
DRM_ERROR("failed to attach phys object\n");
- goto fail;
+ goto fail_locked;
}
addr = obj_priv->phys_obj->handle->busaddr;
}
@@ -1054,10 +1062,9 @@
i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
} else
i915_gem_object_unpin(intel_crtc->cursor_bo);
- mutex_lock(&dev->struct_mutex);
drm_gem_object_unreference(intel_crtc->cursor_bo);
- mutex_unlock(&dev->struct_mutex);
}
+ mutex_unlock(&dev->struct_mutex);
intel_crtc->cursor_addr = addr;
intel_crtc->cursor_bo = bo;
@@ -1065,6 +1072,7 @@
return 0;
fail:
mutex_lock(&dev->struct_mutex);
+fail_locked:
drm_gem_object_unreference(bo);
mutex_unlock(&dev->struct_mutex);
return ret;
@@ -1292,7 +1300,7 @@
}
/* XXX: Handle the 100Mhz refclk */
- i9xx_clock(96000, &clock);
+ intel_clock(96000, &clock);
} else {
bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
@@ -1304,9 +1312,9 @@
if ((dpll & PLL_REF_INPUT_MASK) ==
PLLB_REF_INPUT_SPREADSPECTRUMIN) {
/* XXX: might not be 66MHz */
- i8xx_clock(66000, &clock);
+ intel_clock(66000, &clock);
} else
- i8xx_clock(48000, &clock);
+ intel_clock(48000, &clock);
} else {
if (dpll & PLL_P1_DIVIDE_BY_TWO)
clock.p1 = 2;
@@ -1319,7 +1327,7 @@
else
clock.p2 = 2;
- i8xx_clock(48000, &clock);
+ intel_clock(48000, &clock);
}
}
@@ -1598,7 +1606,9 @@
ret = intel_framebuffer_create(dev, mode_cmd, &fb, obj);
if (ret) {
+ mutex_lock(&dev->struct_mutex);
drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
return NULL;
}
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index afd1217..b7f0ebe 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -473,7 +473,7 @@
ret = intel_framebuffer_create(dev, &mode_cmd, &fb, fbo);
if (ret) {
DRM_ERROR("failed to allocate fb.\n");
- goto out_unref;
+ goto out_unpin;
}
list_add(&fb->filp_head, &dev->mode_config.fb_kernel_list);
@@ -484,7 +484,7 @@
info = framebuffer_alloc(sizeof(struct intelfb_par), device);
if (!info) {
ret = -ENOMEM;
- goto out_unref;
+ goto out_unpin;
}
par = info->par;
@@ -513,7 +513,7 @@
size);
if (!info->screen_base) {
ret = -ENOSPC;
- goto out_unref;
+ goto out_unpin;
}
info->screen_size = size;
@@ -608,6 +608,8 @@
mutex_unlock(&dev->struct_mutex);
return 0;
+out_unpin:
+ i915_gem_object_unpin(fbo);
out_unref:
drm_gem_object_unreference(fbo);
mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 6d4f912..0d211af 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -481,8 +481,6 @@
if (dev_priv->panel_fixed_mode) {
dev_priv->panel_fixed_mode->type |=
DRM_MODE_TYPE_PREFERRED;
- drm_mode_probed_add(connector,
- dev_priv->panel_fixed_mode);
goto out;
}
}
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index a30508b..fbe6f39 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -193,7 +193,7 @@
#define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd}
/** Mapping of command numbers to names, for debug output */
-const static struct _sdvo_cmd_name {
+static const struct _sdvo_cmd_name {
u8 cmd;
char *name;
} sdvo_cmd_names[] = {
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index fbb35dc..56485d6 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -411,7 +411,7 @@
* These values account for -1s required.
*/
-const static struct tv_mode tv_modes[] = {
+static const struct tv_mode tv_modes[] = {
{
.name = "NTSC-M",
.clock = 107520,
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index df4cf97..92965db 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -557,8 +557,10 @@
}
static void radeon_cp_init_ring_buffer(struct drm_device * dev,
- drm_radeon_private_t * dev_priv)
+ drm_radeon_private_t *dev_priv,
+ struct drm_file *file_priv)
{
+ struct drm_radeon_master_private *master_priv;
u32 ring_start, cur_read_ptr;
u32 tmp;
@@ -677,6 +679,14 @@
dev_priv->scratch[2] = 0;
RADEON_WRITE(RADEON_LAST_CLEAR_REG, 0);
+ /* reset sarea copies of these */
+ master_priv = file_priv->master->driver_priv;
+ if (master_priv->sarea_priv) {
+ master_priv->sarea_priv->last_frame = 0;
+ master_priv->sarea_priv->last_dispatch = 0;
+ master_priv->sarea_priv->last_clear = 0;
+ }
+
radeon_do_wait_for_idle(dev_priv);
/* Sync everything up */
@@ -1215,7 +1225,7 @@
}
radeon_cp_load_microcode(dev_priv);
- radeon_cp_init_ring_buffer(dev, dev_priv);
+ radeon_cp_init_ring_buffer(dev, dev_priv, file_priv);
dev_priv->last_buf = 0;
@@ -1281,7 +1291,7 @@
*
* Charl P. Botha <http://cpbotha.net>
*/
-static int radeon_do_resume_cp(struct drm_device * dev)
+static int radeon_do_resume_cp(struct drm_device *dev, struct drm_file *file_priv)
{
drm_radeon_private_t *dev_priv = dev->dev_private;
@@ -1304,7 +1314,7 @@
}
radeon_cp_load_microcode(dev_priv);
- radeon_cp_init_ring_buffer(dev, dev_priv);
+ radeon_cp_init_ring_buffer(dev, dev_priv, file_priv);
radeon_do_engine_reset(dev);
radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1);
@@ -1479,8 +1489,7 @@
*/
int radeon_cp_resume(struct drm_device *dev, void *data, struct drm_file *file_priv)
{
-
- return radeon_do_resume_cp(dev);
+ return radeon_do_resume_cp(dev, file_priv);
}
int radeon_engine_reset(struct drm_device *dev, void *data, struct drm_file *file_priv)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 6cad69e..1cc9674 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1300,7 +1300,13 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) },
@@ -1605,6 +1611,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0002) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3) },
@@ -1612,10 +1619,6 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) },
- { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
- { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) },
- { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
- { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
@@ -1626,8 +1629,6 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_8_8_4_IF_KIT) },
{ HID_USB_DEVICE(USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K) },
- { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
- { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
{ }
};
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index e899f51..8851197 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -348,6 +348,9 @@
#define USB_VENDOR_ID_PLAYDOTCOM 0x0b43
#define USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII 0x0003
+#define USB_VENDOR_ID_POWERCOM 0x0d9f
+#define USB_DEVICE_ID_POWERCOM_UPS 0x0002
+
#define USB_VENDOR_ID_SAITEK 0x06a3
#define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 7324496..02b19db 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -267,8 +267,10 @@
default:
{
struct hid_device *hid = dev->hid;
- if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ)
- return -EINVAL;
+ if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ) {
+ ret = -EINVAL;
+ break;
+ }
if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWNAME(0))) {
int len;
@@ -277,8 +279,9 @@
len = strlen(hid->name) + 1;
if (len > _IOC_SIZE(cmd))
len = _IOC_SIZE(cmd);
- return copy_to_user(user_arg, hid->name, len) ?
+ ret = copy_to_user(user_arg, hid->name, len) ?
-EFAULT : len;
+ break;
}
if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWPHYS(0))) {
@@ -288,12 +291,13 @@
len = strlen(hid->phys) + 1;
if (len > _IOC_SIZE(cmd))
len = _IOC_SIZE(cmd);
- return copy_to_user(user_arg, hid->phys, len) ?
+ ret = copy_to_user(user_arg, hid->phys, len) ?
-EFAULT : len;
+ break;
}
}
- ret = -ENOTTY;
+ ret = -ENOTTY;
}
unlock_kernel();
return ret;
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 609caff..5f81ddf 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -1872,7 +1872,7 @@
devid = superio_inw(sioaddr, SIO_REG_MANID);
if (devid != SIO_FINTEK_ID) {
- printk(KERN_INFO DRVNAME ": Not a Fintek device\n");
+ pr_debug(DRVNAME ": Not a Fintek device\n");
goto exit;
}
@@ -1932,7 +1932,7 @@
res.name = f71882fg_pdev->name;
err = acpi_check_resource_conflict(&res);
if (err)
- return err;
+ goto exit_device_put;
err = platform_device_add_resources(f71882fg_pdev, &res, 1);
if (err) {
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index abf4dfc..29c83b5 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -166,6 +166,18 @@
}, \
.driver_data = &lis3lv02d_axis_##_axis \
}
+
+#define AXIS_DMI_MATCH2(_ident, _class1, _name1, \
+ _class2, _name2, \
+ _axis) { \
+ .ident = _ident, \
+ .callback = lis3lv02d_dmi_matched, \
+ .matches = { \
+ DMI_MATCH(DMI_##_class1, _name1), \
+ DMI_MATCH(DMI_##_class2, _name2), \
+ }, \
+ .driver_data = &lis3lv02d_axis_##_axis \
+}
static struct dmi_system_id lis3lv02d_dmi_ids[] = {
/* product names are truncated to match all kinds of a same model */
AXIS_DMI_MATCH("NC64x0", "HP Compaq nc64", x_inverted),
@@ -179,6 +191,16 @@
AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd),
AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right),
AXIS_DMI_MATCH("NC671xx", "HP Compaq 671", xy_swap_yz_inverted),
+ /* Intel-based HP Pavilion dv5 */
+ AXIS_DMI_MATCH2("HPDV5_I",
+ PRODUCT_NAME, "HP Pavilion dv5",
+ BOARD_NAME, "3603",
+ x_inverted),
+ /* AMD-based HP Pavilion dv5 */
+ AXIS_DMI_MATCH2("HPDV5_A",
+ PRODUCT_NAME, "HP Pavilion dv5",
+ BOARD_NAME, "3600",
+ y_inverted),
{ NULL, }
/* Laptop models without axis info (yet):
* "NC6910" "HP Compaq 6910"
@@ -213,9 +235,49 @@
.set_brightness = hpled_set,
};
+static acpi_status
+lis3lv02d_get_resource(struct acpi_resource *resource, void *context)
+{
+ if (resource->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) {
+ struct acpi_resource_extended_irq *irq;
+ u32 *device_irq = context;
+
+ irq = &resource->data.extended_irq;
+ *device_irq = irq->interrupts[0];
+ }
+
+ return AE_OK;
+}
+
+static void lis3lv02d_enum_resources(struct acpi_device *device)
+{
+ acpi_status status;
+
+ status = acpi_walk_resources(device->handle, METHOD_NAME__CRS,
+ lis3lv02d_get_resource, &adev.irq);
+ if (ACPI_FAILURE(status))
+ printk(KERN_DEBUG DRIVER_NAME ": Error getting resources\n");
+}
+
+static s16 lis3lv02d_read_16(acpi_handle handle, int reg)
+{
+ u8 lo, hi;
+
+ adev.read(handle, reg - 1, &lo);
+ adev.read(handle, reg, &hi);
+ /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
+ return (s16)((hi << 8) | lo);
+}
+
+static s16 lis3lv02d_read_8(acpi_handle handle, int reg)
+{
+ s8 lo;
+ adev.read(handle, reg, &lo);
+ return lo;
+}
+
static int lis3lv02d_add(struct acpi_device *device)
{
- u8 val;
int ret;
if (!device)
@@ -229,10 +291,22 @@
strcpy(acpi_device_class(device), ACPI_MDPS_CLASS);
device->driver_data = &adev;
- lis3lv02d_acpi_read(device->handle, WHO_AM_I, &val);
- if ((val != LIS3LV02DL_ID) && (val != LIS302DL_ID)) {
+ lis3lv02d_acpi_read(device->handle, WHO_AM_I, &adev.whoami);
+ switch (adev.whoami) {
+ case LIS_DOUBLE_ID:
+ printk(KERN_INFO DRIVER_NAME ": 2-byte sensor found\n");
+ adev.read_data = lis3lv02d_read_16;
+ adev.mdps_max_val = 2048;
+ break;
+ case LIS_SINGLE_ID:
+ printk(KERN_INFO DRIVER_NAME ": 1-byte sensor found\n");
+ adev.read_data = lis3lv02d_read_8;
+ adev.mdps_max_val = 128;
+ break;
+ default:
printk(KERN_ERR DRIVER_NAME
- ": Accelerometer chip not LIS3LV02D{L,Q}\n");
+ ": unknown sensor type 0x%X\n", adev.whoami);
+ return -EINVAL;
}
/* If possible use a "standard" axes order */
@@ -247,6 +321,9 @@
if (ret)
return ret;
+ /* obtain IRQ number of our device from ACPI */
+ lis3lv02d_enum_resources(adev.device);
+
ret = lis3lv02d_init_device(&adev);
if (ret) {
flush_work(&hpled_led.work);
diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index 219d2d0..8bb2158 100644
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2007-2008 Yan Burman
* Copyright (C) 2008 Eric Piel
- * Copyright (C) 2008 Pavel Machek
+ * Copyright (C) 2008-2009 Pavel Machek
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -35,6 +35,7 @@
#include <linux/poll.h>
#include <linux/freezer.h>
#include <linux/uaccess.h>
+#include <linux/miscdevice.h>
#include <acpi/acpi_drivers.h>
#include <asm/atomic.h>
#include "lis3lv02d.h"
@@ -52,24 +53,14 @@
* joystick.
*/
-/* Maximum value our axis may get for the input device (signed 12 bits) */
-#define MDPS_MAX_VAL 2048
+struct acpi_lis3lv02d adev = {
+ .misc_wait = __WAIT_QUEUE_HEAD_INITIALIZER(adev.misc_wait),
+};
-struct acpi_lis3lv02d adev;
EXPORT_SYMBOL_GPL(adev);
static int lis3lv02d_add_fs(struct acpi_device *device);
-static s16 lis3lv02d_read_16(acpi_handle handle, int reg)
-{
- u8 lo, hi;
-
- adev.read(handle, reg, &lo);
- adev.read(handle, reg + 1, &hi);
- /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
- return (s16)((hi << 8) | lo);
-}
-
/**
* lis3lv02d_get_axis - For the given axis, give the value converted
* @axis: 1,2,3 - can also be negative
@@ -98,9 +89,9 @@
{
int position[3];
- position[0] = lis3lv02d_read_16(handle, OUTX_L);
- position[1] = lis3lv02d_read_16(handle, OUTY_L);
- position[2] = lis3lv02d_read_16(handle, OUTZ_L);
+ position[0] = adev.read_data(handle, OUTX);
+ position[1] = adev.read_data(handle, OUTY);
+ position[2] = adev.read_data(handle, OUTZ);
*x = lis3lv02d_get_axis(adev.ac.x, position);
*y = lis3lv02d_get_axis(adev.ac.y, position);
@@ -110,26 +101,13 @@
void lis3lv02d_poweroff(acpi_handle handle)
{
adev.is_on = 0;
- /* disable X,Y,Z axis and power down */
- adev.write(handle, CTRL_REG1, 0x00);
}
EXPORT_SYMBOL_GPL(lis3lv02d_poweroff);
void lis3lv02d_poweron(acpi_handle handle)
{
- u8 val;
-
adev.is_on = 1;
adev.init(handle);
- adev.write(handle, FF_WU_CFG, 0);
- /*
- * BDU: LSB and MSB values are not updated until both have been read.
- * So the value read will always be correct.
- * IEN: Interrupt for free-fall and DD, not for data-ready.
- */
- adev.read(handle, CTRL_REG2, &val);
- val |= CTRL2_BDU | CTRL2_IEN;
- adev.write(handle, CTRL_REG2, val);
}
EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
@@ -162,6 +140,140 @@
mutex_unlock(&dev->lock);
}
+static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
+{
+ /*
+ * Be careful: on some HP laptops the bios force DD when on battery and
+ * the lid is closed. This leads to interrupts as soon as a little move
+ * is done.
+ */
+ atomic_inc(&adev.count);
+
+ wake_up_interruptible(&adev.misc_wait);
+ kill_fasync(&adev.async_queue, SIGIO, POLL_IN);
+ return IRQ_HANDLED;
+}
+
+static int lis3lv02d_misc_open(struct inode *inode, struct file *file)
+{
+ int ret;
+
+ if (test_and_set_bit(0, &adev.misc_opened))
+ return -EBUSY; /* already open */
+
+ atomic_set(&adev.count, 0);
+
+ /*
+ * The sensor can generate interrupts for free-fall and direction
+ * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep
+ * the things simple and _fast_ we activate it only for free-fall, so
+ * no need to read register (very slow with ACPI). For the same reason,
+ * we forbid shared interrupts.
+ *
+ * IRQF_TRIGGER_RISING seems pointless on HP laptops because the
+ * io-apic is not configurable (and generates a warning) but I keep it
+ * in case of support for other hardware.
+ */
+ ret = request_irq(adev.irq, lis302dl_interrupt, IRQF_TRIGGER_RISING,
+ DRIVER_NAME, &adev);
+
+ if (ret) {
+ clear_bit(0, &adev.misc_opened);
+ printk(KERN_ERR DRIVER_NAME ": IRQ%d allocation failed\n", adev.irq);
+ return -EBUSY;
+ }
+ lis3lv02d_increase_use(&adev);
+ printk("lis3: registered interrupt %d\n", adev.irq);
+ return 0;
+}
+
+static int lis3lv02d_misc_release(struct inode *inode, struct file *file)
+{
+ fasync_helper(-1, file, 0, &adev.async_queue);
+ lis3lv02d_decrease_use(&adev);
+ free_irq(adev.irq, &adev);
+ clear_bit(0, &adev.misc_opened); /* release the device */
+ return 0;
+}
+
+static ssize_t lis3lv02d_misc_read(struct file *file, char __user *buf,
+ size_t count, loff_t *pos)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ u32 data;
+ unsigned char byte_data;
+ ssize_t retval = 1;
+
+ if (count < 1)
+ return -EINVAL;
+
+ add_wait_queue(&adev.misc_wait, &wait);
+ while (true) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ data = atomic_xchg(&adev.count, 0);
+ if (data)
+ break;
+
+ if (file->f_flags & O_NONBLOCK) {
+ retval = -EAGAIN;
+ goto out;
+ }
+
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ goto out;
+ }
+
+ schedule();
+ }
+
+ if (data < 255)
+ byte_data = data;
+ else
+ byte_data = 255;
+
+ /* make sure we are not going into copy_to_user() with
+ * TASK_INTERRUPTIBLE state */
+ set_current_state(TASK_RUNNING);
+ if (copy_to_user(buf, &byte_data, sizeof(byte_data)))
+ retval = -EFAULT;
+
+out:
+ __set_current_state(TASK_RUNNING);
+ remove_wait_queue(&adev.misc_wait, &wait);
+
+ return retval;
+}
+
+static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait)
+{
+ poll_wait(file, &adev.misc_wait, wait);
+ if (atomic_read(&adev.count))
+ return POLLIN | POLLRDNORM;
+ return 0;
+}
+
+static int lis3lv02d_misc_fasync(int fd, struct file *file, int on)
+{
+ return fasync_helper(fd, file, on, &adev.async_queue);
+}
+
+static const struct file_operations lis3lv02d_misc_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .read = lis3lv02d_misc_read,
+ .open = lis3lv02d_misc_open,
+ .release = lis3lv02d_misc_release,
+ .poll = lis3lv02d_misc_poll,
+ .fasync = lis3lv02d_misc_fasync,
+};
+
+static struct miscdevice lis3lv02d_misc_device = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "freefall",
+ .fops = &lis3lv02d_misc_fops,
+};
+
/**
* lis3lv02d_joystick_kthread - Kthread polling function
* @data: unused - here to conform to threadfn prototype
@@ -203,7 +315,6 @@
lis3lv02d_decrease_use(&adev);
}
-
static inline void lis3lv02d_calibrate_joystick(void)
{
lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib);
@@ -231,9 +342,9 @@
adev.idev->close = lis3lv02d_joystick_close;
set_bit(EV_ABS, adev.idev->evbit);
- input_set_abs_params(adev.idev, ABS_X, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
- input_set_abs_params(adev.idev, ABS_Y, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
- input_set_abs_params(adev.idev, ABS_Z, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
+ input_set_abs_params(adev.idev, ABS_X, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
+ input_set_abs_params(adev.idev, ABS_Y, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
+ input_set_abs_params(adev.idev, ABS_Z, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
err = input_register_device(adev.idev);
if (err) {
@@ -250,6 +361,7 @@
if (!adev.idev)
return;
+ misc_deregister(&lis3lv02d_misc_device);
input_unregister_device(adev.idev);
adev.idev = NULL;
}
@@ -268,6 +380,19 @@
if (lis3lv02d_joystick_enable())
printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n");
+ printk("lis3_init_device: irq %d\n", dev->irq);
+
+ /* if we did not get an IRQ from ACPI - we have nothing more to do */
+ if (!dev->irq) {
+ printk(KERN_ERR DRIVER_NAME
+ ": No IRQ in ACPI. Disabling /dev/freefall\n");
+ goto out;
+ }
+
+ printk("lis3: registering device\n");
+ if (misc_register(&lis3lv02d_misc_device))
+ printk(KERN_ERR DRIVER_NAME ": misc_register failed\n");
+out:
lis3lv02d_decrease_use(dev);
return 0;
}
@@ -351,6 +476,6 @@
EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs);
MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver");
-MODULE_AUTHOR("Yan Burman and Eric Piel");
+MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek");
MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h
index 223f1c0..75972bf 100644
--- a/drivers/hwmon/lis3lv02d.h
+++ b/drivers/hwmon/lis3lv02d.h
@@ -22,12 +22,15 @@
/*
* The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to
* be connected via SPI. There exists also several similar chips (such as LIS302DL or
- * LIS3L02DQ) but not in the HP laptops and they have slightly different registers.
+ * LIS3L02DQ) and they have slightly different registers, but we can provide a
+ * common interface for all of them.
* They can also be connected via I²C.
*/
-#define LIS3LV02DL_ID 0x3A /* Also the LIS3LV02DQ */
-#define LIS302DL_ID 0x3B /* Also the LIS202DL! */
+/* 2-byte registers */
+#define LIS_DOUBLE_ID 0x3A /* LIS3LV02D[LQ] */
+/* 1-byte registers */
+#define LIS_SINGLE_ID 0x3B /* LIS[32]02DL and others */
enum lis3lv02d_reg {
WHO_AM_I = 0x0F,
@@ -44,10 +47,13 @@
STATUS_REG = 0x27,
OUTX_L = 0x28,
OUTX_H = 0x29,
+ OUTX = 0x29,
OUTY_L = 0x2A,
OUTY_H = 0x2B,
+ OUTY = 0x2B,
OUTZ_L = 0x2C,
OUTZ_H = 0x2D,
+ OUTZ = 0x2D,
FF_WU_CFG = 0x30,
FF_WU_SRC = 0x31,
FF_WU_ACK = 0x32,
@@ -159,6 +165,10 @@
acpi_status (*write) (acpi_handle handle, int reg, u8 val);
acpi_status (*read) (acpi_handle handle, int reg, u8 *ret);
+ u8 whoami; /* 3Ah: 2-byte registries, 3Bh: 1-byte registries */
+ s16 (*read_data) (acpi_handle handle, int reg);
+ int mdps_max_val;
+
struct input_dev *idev; /* input device */
struct task_struct *kthread; /* kthread for input */
struct mutex lock;
@@ -170,6 +180,11 @@
unsigned char is_on; /* whether the device is on or off */
unsigned char usage; /* usage counter */
struct axis_conversion ac; /* hw -> logical axis */
+
+ u32 irq; /* IRQ number */
+ struct fasync_struct *async_queue; /* queue for the misc device */
+ wait_queue_head_t misc_wait; /* Wait queue for the misc device */
+ unsigned long misc_opened; /* bit0: whether the device is open */
};
int lis3lv02d_init_device(struct acpi_lis3lv02d *dev);
diff --git a/drivers/hwmon/vt1211.c b/drivers/hwmon/vt1211.c
index b0ce378..73f77a9 100644
--- a/drivers/hwmon/vt1211.c
+++ b/drivers/hwmon/vt1211.c
@@ -1262,7 +1262,7 @@
res.name = pdev->name;
err = acpi_check_resource_conflict(&res);
if (err)
- goto EXIT;
+ goto EXIT_DEV_PUT;
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index cb808d0..feae743 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -1548,7 +1548,7 @@
err = acpi_check_resource_conflict(&res);
if (err)
- goto exit;
+ goto exit_device_put;
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c
index a343385..f14813b 100644
--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -328,7 +328,7 @@
struct dpages old_pages = *dp;
if (sync)
- rw |= (1 << BIO_RW_SYNC);
+ rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
/*
* For multiple regions we need to be careful to rewind
diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c
index 3073618..0a225da 100644
--- a/drivers/md/dm-kcopyd.c
+++ b/drivers/md/dm-kcopyd.c
@@ -344,7 +344,7 @@
{
int r;
struct dm_io_request io_req = {
- .bi_rw = job->rw | (1 << BIO_RW_SYNC),
+ .bi_rw = job->rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG),
.mem.type = DM_IO_PAGE_LIST,
.mem.ptr.pl = job->pages,
.mem.offset = job->offset,
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 4495104..03b4cd0 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -474,7 +474,7 @@
* causes ENOTSUPP, we allocate a spare bio...
*/
struct bio *bio = bio_alloc(GFP_NOIO, 1);
- int rw = (1<<BIO_RW) | (1<<BIO_RW_SYNC);
+ int rw = (1<<BIO_RW) | (1<<BIO_RW_SYNCIO) | (1<<BIO_RW_UNPLUG);
bio->bi_bdev = rdev->bdev;
bio->bi_sector = sector;
@@ -531,7 +531,7 @@
struct completion event;
int ret;
- rw |= (1 << BIO_RW_SYNC);
+ rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
bio->bi_bdev = bdev;
bio->bi_sector = sector;
diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c
index de7adaf..78412c9 100644
--- a/drivers/media/common/tuners/tuner-simple.c
+++ b/drivers/media/common/tuners/tuner-simple.c
@@ -318,7 +318,6 @@
u8 *config, u8 *cb)
{
struct tuner_simple_priv *priv = fe->tuner_priv;
- u8 tuneraddr;
int rc;
/* tv norm specific stuff for multi-norm tuners */
@@ -387,6 +386,7 @@
case TUNER_PHILIPS_TUV1236D:
{
+ struct tuner_i2c_props i2c = priv->i2c_props;
/* 0x40 -> ATSC antenna input 1 */
/* 0x48 -> ATSC antenna input 2 */
/* 0x00 -> NTSC antenna input 1 */
@@ -398,17 +398,15 @@
buffer[1] = 0x04;
}
/* set to the correct mode (analog or digital) */
- tuneraddr = priv->i2c_props.addr;
- priv->i2c_props.addr = 0x0a;
- rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[0], 2);
+ i2c.addr = 0x0a;
+ rc = tuner_i2c_xfer_send(&i2c, &buffer[0], 2);
if (2 != rc)
tuner_warn("i2c i/o error: rc == %d "
"(should be 2)\n", rc);
- rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[2], 2);
+ rc = tuner_i2c_xfer_send(&i2c, &buffer[2], 2);
if (2 != rc)
tuner_warn("i2c i/o error: rc == %d "
"(should be 2)\n", rc);
- priv->i2c_props.addr = tuneraddr;
break;
}
}
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index 0c733c6..069d847 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -364,16 +364,15 @@
enum dmx_success success)
{
struct dmxdev_filter *dmxdevfilter = filter->priv;
- unsigned long flags;
int ret;
if (dmxdevfilter->buffer.error) {
wake_up(&dmxdevfilter->buffer.queue);
return 0;
}
- spin_lock_irqsave(&dmxdevfilter->dev->lock, flags);
+ spin_lock(&dmxdevfilter->dev->lock);
if (dmxdevfilter->state != DMXDEV_STATE_GO) {
- spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+ spin_unlock(&dmxdevfilter->dev->lock);
return 0;
}
del_timer(&dmxdevfilter->timer);
@@ -392,7 +391,7 @@
}
if (dmxdevfilter->params.sec.flags & DMX_ONESHOT)
dmxdevfilter->state = DMXDEV_STATE_DONE;
- spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+ spin_unlock(&dmxdevfilter->dev->lock);
wake_up(&dmxdevfilter->buffer.queue);
return 0;
}
@@ -404,12 +403,11 @@
{
struct dmxdev_filter *dmxdevfilter = feed->priv;
struct dvb_ringbuffer *buffer;
- unsigned long flags;
int ret;
- spin_lock_irqsave(&dmxdevfilter->dev->lock, flags);
+ spin_lock(&dmxdevfilter->dev->lock);
if (dmxdevfilter->params.pes.output == DMX_OUT_DECODER) {
- spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+ spin_unlock(&dmxdevfilter->dev->lock);
return 0;
}
@@ -419,7 +417,7 @@
else
buffer = &dmxdevfilter->dev->dvr_buffer;
if (buffer->error) {
- spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+ spin_unlock(&dmxdevfilter->dev->lock);
wake_up(&buffer->queue);
return 0;
}
@@ -430,7 +428,7 @@
dvb_ringbuffer_flush(buffer);
buffer->error = ret;
}
- spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+ spin_unlock(&dmxdevfilter->dev->lock);
wake_up(&buffer->queue);
return 0;
}
diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c
index a2c1fd5..e2eca0b 100644
--- a/drivers/media/dvb/dvb-core/dvb_demux.c
+++ b/drivers/media/dvb/dvb-core/dvb_demux.c
@@ -399,9 +399,7 @@
void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf,
size_t count)
{
- unsigned long flags;
-
- spin_lock_irqsave(&demux->lock, flags);
+ spin_lock(&demux->lock);
while (count--) {
if (buf[0] == 0x47)
@@ -409,17 +407,16 @@
buf += 188;
}
- spin_unlock_irqrestore(&demux->lock, flags);
+ spin_unlock(&demux->lock);
}
EXPORT_SYMBOL(dvb_dmx_swfilter_packets);
void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count)
{
- unsigned long flags;
int p = 0, i, j;
- spin_lock_irqsave(&demux->lock, flags);
+ spin_lock(&demux->lock);
if (demux->tsbufp) {
i = demux->tsbufp;
@@ -452,18 +449,17 @@
}
bailout:
- spin_unlock_irqrestore(&demux->lock, flags);
+ spin_unlock(&demux->lock);
}
EXPORT_SYMBOL(dvb_dmx_swfilter);
void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count)
{
- unsigned long flags;
int p = 0, i, j;
u8 tmppack[188];
- spin_lock_irqsave(&demux->lock, flags);
+ spin_lock(&demux->lock);
if (demux->tsbufp) {
i = demux->tsbufp;
@@ -504,7 +500,7 @@
}
bailout:
- spin_unlock_irqrestore(&demux->lock, flags);
+ spin_unlock(&demux->lock);
}
EXPORT_SYMBOL(dvb_dmx_swfilter_204);
diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c
index 67cbce8..4dfed6a 100644
--- a/drivers/media/radio/radio-si470x.c
+++ b/drivers/media/radio/radio-si470x.c
@@ -98,11 +98,16 @@
* - blacklisted KWorld radio in hid-core.c and hid-ids.h
* 2008-12-03 Mark Lord <mlord@pobox.com>
* - add support for DealExtreme USB Radio
+ * 2009-01-31 Bob Ross <pigiron@gmx.com>
+ * - correction of stereo detection/setting
+ * - correction of signal strength indicator scaling
+ * 2009-01-31 Rick Bronson <rick@efn.org>
+ * Tobias Lorenz <tobias.lorenz@gmx.net>
+ * - add LED status output
*
* ToDo:
* - add firmware download/update support
* - RDS support: interrupt mode, instead of polling
- * - add LED status output (check if that's not already done in firmware)
*/
@@ -882,6 +887,30 @@
/**************************************************************************
+ * General Driver Functions - LED_REPORT
+ **************************************************************************/
+
+/*
+ * si470x_set_led_state - sets the led state
+ */
+static int si470x_set_led_state(struct si470x_device *radio,
+ unsigned char led_state)
+{
+ unsigned char buf[LED_REPORT_SIZE];
+ int retval;
+
+ buf[0] = LED_REPORT;
+ buf[1] = LED_COMMAND;
+ buf[2] = led_state;
+
+ retval = si470x_set_report(radio, (void *) &buf, sizeof(buf));
+
+ return (retval < 0) ? -EINVAL : 0;
+}
+
+
+
+/**************************************************************************
* RDS Driver Functions
**************************************************************************/
@@ -1385,20 +1414,22 @@
};
/* stereo indicator == stereo (instead of mono) */
- if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 1)
- tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
- else
+ if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 0)
tuner->rxsubchans = V4L2_TUNER_SUB_MONO;
+ else
+ tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
/* mono/stereo selector */
- if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 1)
- tuner->audmode = V4L2_TUNER_MODE_MONO;
- else
+ if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 0)
tuner->audmode = V4L2_TUNER_MODE_STEREO;
+ else
+ tuner->audmode = V4L2_TUNER_MODE_MONO;
/* min is worst, max is best; signal:0..0xffff; rssi: 0..0xff */
- tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI)
- * 0x0101;
+ /* measured in units of dbµV in 1 db increments (max at ~75 dbµV) */
+ tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI);
+ /* the ideal factor is 0xffff/75 = 873,8 */
+ tuner->signal = (tuner->signal * 873) + (8 * tuner->signal / 10);
/* automatic frequency control: -1: freq to low, 1 freq to high */
/* AFCRL does only indicate that freq. differs, not if too low/high */
@@ -1632,6 +1663,9 @@
/* set initial frequency */
si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */
+ /* set led to connect state */
+ si470x_set_led_state(radio, BLINK_GREEN_LED);
+
/* rds buffer allocation */
radio->buf_size = rds_buf * 3;
radio->buffer = kmalloc(radio->buf_size, GFP_KERNEL);
@@ -1715,6 +1749,9 @@
cancel_delayed_work_sync(&radio->work);
usb_set_intfdata(intf, NULL);
if (radio->users == 0) {
+ /* set led to disconnect state */
+ si470x_set_led_state(radio, BLINK_ORANGE_LED);
+
video_unregister_device(radio->videodev);
kfree(radio->buffer);
kfree(radio);
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 2ed2452..65e4901 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -422,6 +422,7 @@
if (urb == NULL)
break;
+ BUG_ON(!gspca_dev->dev);
gspca_dev->urb[i] = NULL;
if (!gspca_dev->present)
usb_kill_urb(urb);
@@ -1950,8 +1951,12 @@
{
struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+ mutex_lock(&gspca_dev->usb_lock);
gspca_dev->present = 0;
+ mutex_unlock(&gspca_dev->usb_lock);
+ destroy_urbs(gspca_dev);
+ gspca_dev->dev = NULL;
usb_set_intfdata(intf, NULL);
/* release the device */
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index f6b3ef6..c13bd2a 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -393,7 +393,7 @@
return 0;
}
- v4l2_subdev_call(itv->sd_video, video, s_fmt, fmt);
+ v4l2_subdev_call(itv->sd_video, video, g_fmt, fmt);
vbifmt->service_set = ivtv_get_service_set(vbifmt);
return 0;
}
@@ -1748,6 +1748,18 @@
break;
}
+ case IVTV_IOC_DMA_FRAME:
+ case VIDEO_GET_PTS:
+ case VIDEO_GET_FRAME_COUNT:
+ case VIDEO_GET_EVENT:
+ case VIDEO_PLAY:
+ case VIDEO_STOP:
+ case VIDEO_FREEZE:
+ case VIDEO_CONTINUE:
+ case VIDEO_COMMAND:
+ case VIDEO_TRY_COMMAND:
+ return ivtv_decoder_ioctls(file, cmd, (void *)arg);
+
default:
return -EINVAL;
}
@@ -1790,18 +1802,6 @@
ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode);
return 0;
- case IVTV_IOC_DMA_FRAME:
- case VIDEO_GET_PTS:
- case VIDEO_GET_FRAME_COUNT:
- case VIDEO_GET_EVENT:
- case VIDEO_PLAY:
- case VIDEO_STOP:
- case VIDEO_FREEZE:
- case VIDEO_CONTINUE:
- case VIDEO_COMMAND:
- case VIDEO_TRY_COMMAND:
- return ivtv_decoder_ioctls(filp, cmd, (void *)arg);
-
default:
break;
}
diff --git a/drivers/mfd/htc-egpio.c b/drivers/mfd/htc-egpio.c
index 1a4d046..aa266e1 100644
--- a/drivers/mfd/htc-egpio.c
+++ b/drivers/mfd/htc-egpio.c
@@ -286,7 +286,7 @@
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
goto fail;
- ei->base_addr = ioremap_nocache(res->start, res->end - res->start);
+ ei->base_addr = ioremap_nocache(res->start, resource_size(res));
if (!ei->base_addr)
goto fail;
pr_debug("EGPIO phys=%08x virt=%p\n", (u32)res->start, ei->base_addr);
@@ -307,7 +307,7 @@
ei->nchips = pdata->num_chips;
ei->chip = kzalloc(sizeof(struct egpio_chip) * ei->nchips, GFP_KERNEL);
- if (!ei) {
+ if (!ei->chip) {
ret = -ENOMEM;
goto fail;
}
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index ea9488e..2e36057 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -678,6 +678,7 @@
static struct i2c_device_id pcf50633_id_table[] = {
{"pcf50633", 0x73},
+ {/* end of list */}
};
static struct i2c_driver pcf50633_driver = {
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 0e5761f..4c7b796 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -1050,7 +1050,7 @@
return gpiochip_add(gchip);
}
-static int sm501_register_gpio(struct sm501_devdata *sm)
+static int __devinit sm501_register_gpio(struct sm501_devdata *sm)
{
struct sm501_gpio *gpio = &sm->gpio;
resource_size_t iobase = sm->io_res->start + SM501_GPIO;
@@ -1321,7 +1321,7 @@
* Common init code for an SM501
*/
-static int sm501_init_dev(struct sm501_devdata *sm)
+static int __devinit sm501_init_dev(struct sm501_devdata *sm)
{
struct sm501_initdata *idata;
struct sm501_platdata *pdata;
@@ -1397,7 +1397,7 @@
return 0;
}
-static int sm501_plat_probe(struct platform_device *dev)
+static int __devinit sm501_plat_probe(struct platform_device *dev)
{
struct sm501_devdata *sm;
int ret;
@@ -1586,8 +1586,8 @@
.gpio_base = -1,
};
-static int sm501_pci_probe(struct pci_dev *dev,
- const struct pci_device_id *id)
+static int __devinit sm501_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
{
struct sm501_devdata *sm;
int err;
@@ -1693,7 +1693,7 @@
sm501_gpio_remove(sm);
}
-static void sm501_pci_remove(struct pci_dev *dev)
+static void __devexit sm501_pci_remove(struct pci_dev *dev)
{
struct sm501_devdata *sm = pci_get_drvdata(dev);
@@ -1727,16 +1727,16 @@
MODULE_DEVICE_TABLE(pci, sm501_pci_tbl);
-static struct pci_driver sm501_pci_drv = {
+static struct pci_driver sm501_pci_driver = {
.name = "sm501",
.id_table = sm501_pci_tbl,
.probe = sm501_pci_probe,
- .remove = sm501_pci_remove,
+ .remove = __devexit_p(sm501_pci_remove),
};
MODULE_ALIAS("platform:sm501");
-static struct platform_driver sm501_plat_drv = {
+static struct platform_driver sm501_plat_driver = {
.driver = {
.name = "sm501",
.owner = THIS_MODULE,
@@ -1749,14 +1749,14 @@
static int __init sm501_base_init(void)
{
- platform_driver_register(&sm501_plat_drv);
- return pci_register_driver(&sm501_pci_drv);
+ platform_driver_register(&sm501_plat_driver);
+ return pci_register_driver(&sm501_pci_driver);
}
static void __exit sm501_base_exit(void)
{
- platform_driver_unregister(&sm501_plat_drv);
- pci_unregister_driver(&sm501_pci_drv);
+ platform_driver_unregister(&sm501_plat_driver);
+ pci_unregister_driver(&sm501_pci_driver);
}
module_init(sm501_base_init);
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index e7ab003..68826f1 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -38,7 +38,7 @@
#include <linux/i2c.h>
#include <linux/i2c/twl4030.h>
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
#include <mach/cpu.h>
#endif
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index f92595c..84d5ea1 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -1111,7 +1111,7 @@
do {
schedule_timeout_interruptible(1);
reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
- } while (tries-- && (reg & WM8350_AUXADC_POLL));
+ } while (--tries && (reg & WM8350_AUXADC_POLL));
if (!tries)
dev_err(wm8350->dev, "adc chn %d read timeout\n", channel);
@@ -1297,14 +1297,29 @@
int wm8350_device_init(struct wm8350 *wm8350, int irq,
struct wm8350_platform_data *pdata)
{
- int ret = -EINVAL;
+ int ret;
u16 id1, id2, mask_rev;
u16 cust_id, mode, chip_rev;
/* get WM8350 revision and config mode */
- wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1);
- wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2);
- wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev), &mask_rev);
+ ret = wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1);
+ if (ret != 0) {
+ dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
+ goto err;
+ }
+
+ ret = wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2);
+ if (ret != 0) {
+ dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
+ goto err;
+ }
+
+ ret = wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev),
+ &mask_rev);
+ if (ret != 0) {
+ dev_err(wm8350->dev, "Failed to read revision: %d\n", ret);
+ goto err;
+ }
id1 = be16_to_cpu(id1);
id2 = be16_to_cpu(id2);
@@ -1404,14 +1419,12 @@
return ret;
}
- if (pdata && pdata->init) {
- ret = pdata->init(wm8350);
- if (ret != 0) {
- dev_err(wm8350->dev, "Platform init() failed: %d\n",
- ret);
- goto err;
- }
- }
+ wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0xFFFF);
+ wm8350_reg_write(wm8350, WM8350_INT_STATUS_1_MASK, 0xFFFF);
+ wm8350_reg_write(wm8350, WM8350_INT_STATUS_2_MASK, 0xFFFF);
+ wm8350_reg_write(wm8350, WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, 0xFFFF);
+ wm8350_reg_write(wm8350, WM8350_GPIO_INT_STATUS_MASK, 0xFFFF);
+ wm8350_reg_write(wm8350, WM8350_COMPARATOR_INT_STATUS_MASK, 0xFFFF);
mutex_init(&wm8350->auxadc_mutex);
mutex_init(&wm8350->irq_mutex);
@@ -1430,6 +1443,15 @@
}
wm8350->chip_irq = irq;
+ if (pdata && pdata->init) {
+ ret = pdata->init(wm8350);
+ if (ret != 0) {
+ dev_err(wm8350->dev, "Platform init() failed: %d\n",
+ ret);
+ goto err;
+ }
+ }
+
wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0);
wm8350_client_dev_register(wm8350, "wm8350-codec",
diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c
index 68887b8..9a4cc95 100644
--- a/drivers/mfd/wm8350-regmap.c
+++ b/drivers/mfd/wm8350-regmap.c
@@ -3188,7 +3188,7 @@
{ 0x7CFF, 0x0C00, 0x7FFF }, /* R1 - ID */
{ 0x0000, 0x0000, 0x0000 }, /* R2 */
{ 0xBE3B, 0xBE3B, 0x8000 }, /* R3 - System Control 1 */
- { 0xFCF7, 0xFCF7, 0xF800 }, /* R4 - System Control 2 */
+ { 0xFEF7, 0xFEF7, 0xF800 }, /* R4 - System Control 2 */
{ 0x80FF, 0x80FF, 0x8000 }, /* R5 - System Hibernate */
{ 0xFB0E, 0xFB0E, 0x0000 }, /* R6 - Interface Control */
{ 0x0000, 0x0000, 0x0000 }, /* R7 */
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 45b1f43..513eb09 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -584,7 +584,7 @@
if (err)
goto out;
- string_get_size(get_capacity(md->disk) << 9, STRING_UNITS_2,
+ string_get_size((u64)get_capacity(md->disk) << 9, STRING_UNITS_2,
cap_str, sizeof(cap_str));
printk(KERN_INFO "%s: %s %s %s %s\n",
md->disk->disk_name, mmc_card_id(card), mmc_card_name(card),
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index b92b172..b9f1e84 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -494,7 +494,7 @@
sg_init_one(&sg, test->buffer, 512);
- ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 1);
+ ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 0);
if (ret)
return ret;
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 76bfe16..2b1196e 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1548,9 +1548,10 @@
{
struct dw_dma_slave *dws = slave;
- if (dws->dma_dev == chan->device->dev)
+ if (dws->dma_dev == chan->device->dev) {
+ chan->private = dws;
return true;
- else
+ } else
return false;
}
#endif
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index db37490..a631c81 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -55,6 +55,7 @@
#define VS30 (1 << 25)
#define SDVS18 (0x5 << 9)
#define SDVS30 (0x6 << 9)
+#define SDVS33 (0x7 << 9)
#define SDVSCLR 0xFFFFF1FF
#define SDVSDET 0x00000400
#define AUTOIDLE 0x1
@@ -375,6 +376,32 @@
}
#endif /* CONFIG_MMC_DEBUG */
+/*
+ * MMC controller internal state machines reset
+ *
+ * Used to reset command or data internal state machines, using respectively
+ * SRC or SRD bit of SYSCTL register
+ * Can be called from interrupt context
+ */
+static inline void mmc_omap_reset_controller_fsm(struct mmc_omap_host *host,
+ unsigned long bit)
+{
+ unsigned long i = 0;
+ unsigned long limit = (loops_per_jiffy *
+ msecs_to_jiffies(MMC_TIMEOUT_MS));
+
+ OMAP_HSMMC_WRITE(host->base, SYSCTL,
+ OMAP_HSMMC_READ(host->base, SYSCTL) | bit);
+
+ while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) &&
+ (i++ < limit))
+ cpu_relax();
+
+ if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit)
+ dev_err(mmc_dev(host->mmc),
+ "Timeout waiting on controller reset in %s\n",
+ __func__);
+}
/*
* MMC controller IRQ handler
@@ -403,21 +430,17 @@
(status & CMD_CRC)) {
if (host->cmd) {
if (status & CMD_TIMEOUT) {
- OMAP_HSMMC_WRITE(host->base, SYSCTL,
- OMAP_HSMMC_READ(host->base,
- SYSCTL) | SRC);
- while (OMAP_HSMMC_READ(host->base,
- SYSCTL) & SRC)
- ;
-
+ mmc_omap_reset_controller_fsm(host, SRC);
host->cmd->error = -ETIMEDOUT;
} else {
host->cmd->error = -EILSEQ;
}
end_cmd = 1;
}
- if (host->data)
+ if (host->data) {
mmc_dma_cleanup(host);
+ mmc_omap_reset_controller_fsm(host, SRD);
+ }
}
if ((status & DATA_TIMEOUT) ||
(status & DATA_CRC)) {
@@ -426,12 +449,7 @@
mmc_dma_cleanup(host);
else
host->data->error = -EILSEQ;
- OMAP_HSMMC_WRITE(host->base, SYSCTL,
- OMAP_HSMMC_READ(host->base,
- SYSCTL) | SRD);
- while (OMAP_HSMMC_READ(host->base,
- SYSCTL) & SRD)
- ;
+ mmc_omap_reset_controller_fsm(host, SRD);
end_trans = 1;
}
}
@@ -456,13 +474,20 @@
}
/*
- * Switch MMC operating voltage
+ * Switch MMC interface voltage ... only relevant for MMC1.
+ *
+ * MMC2 and MMC3 use fixed 1.8V levels, and maybe a transceiver.
+ * The MMC2 transceiver controls are used instead of DAT4..DAT7.
+ * Some chips, like eMMC ones, use internal transceivers.
*/
static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
{
u32 reg_val = 0;
int ret;
+ if (host->id != OMAP_MMC1_DEVID)
+ return 0;
+
/* Disable the clocks */
clk_disable(host->fclk);
clk_disable(host->iclk);
@@ -485,19 +510,26 @@
OMAP_HSMMC_WRITE(host->base, HCTL,
OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR);
reg_val = OMAP_HSMMC_READ(host->base, HCTL);
+
/*
* If a MMC dual voltage card is detected, the set_ios fn calls
* this fn with VDD bit set for 1.8V. Upon card removal from the
* slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF.
*
- * Only MMC1 supports 3.0V. MMC2 will not function if SDVS30 is
- * set in HCTL.
+ * Cope with a bit of slop in the range ... per data sheets:
+ * - "1.8V" for vdds_mmc1/vdds_mmc1a can be up to 2.45V max,
+ * but recommended values are 1.71V to 1.89V
+ * - "3.0V" for vdds_mmc1/vdds_mmc1a can be up to 3.5V max,
+ * but recommended values are 2.7V to 3.3V
+ *
+ * Board setup code shouldn't permit anything very out-of-range.
+ * TWL4030-family VMMC1 and VSIM regulators are fine (avoiding the
+ * middle range) but VSIM can't power DAT4..DAT7 at more than 3V.
*/
- if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) ||
- ((1 << vdd) == MMC_VDD_33_34)))
- reg_val |= SDVS30;
- if ((1 << vdd) == MMC_VDD_165_195)
+ if ((1 << vdd) <= MMC_VDD_23_24)
reg_val |= SDVS18;
+ else
+ reg_val |= SDVS30;
OMAP_HSMMC_WRITE(host->base, HCTL, reg_val);
@@ -517,16 +549,15 @@
{
struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
mmc_carddetect_work);
+ struct omap_mmc_slot_data *slot = &mmc_slot(host);
+
+ host->carddetect = slot->card_detect(slot->card_detect_irq);
sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
if (host->carddetect) {
mmc_detect_change(host->mmc, (HZ * 200) / 1000);
} else {
- OMAP_HSMMC_WRITE(host->base, SYSCTL,
- OMAP_HSMMC_READ(host->base, SYSCTL) | SRD);
- while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD)
- ;
-
+ mmc_omap_reset_controller_fsm(host, SRD);
mmc_detect_change(host->mmc, (HZ * 50) / 1000);
}
}
@@ -538,7 +569,6 @@
{
struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id;
- host->carddetect = mmc_slot(host).card_detect(irq);
schedule_work(&host->mmc_carddetect_work);
return IRQ_HANDLED;
@@ -757,10 +787,14 @@
case MMC_POWER_OFF:
mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
/*
- * Reset bus voltage to 3V if it got set to 1.8V earlier.
+ * Reset interface voltage to 3V if it's 1.8V now;
+ * only relevant on MMC-1, the others always use 1.8V.
+ *
* REVISIT: If we are able to detect cards after unplugging
* a 1.8V card, this code should not be needed.
*/
+ if (host->id != OMAP_MMC1_DEVID)
+ break;
if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
int vdd = fls(host->mmc->ocr_avail) - 1;
if (omap_mmc_switch_opcond(host, vdd) != 0)
@@ -784,7 +818,9 @@
}
if (host->id == OMAP_MMC1_DEVID) {
- /* Only MMC1 can operate at 3V/1.8V */
+ /* Only MMC1 can interface at 3V without some flavor
+ * of external transceiver; but they all handle 1.8V.
+ */
if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
(ios->vdd == DUAL_VOLT_OCR_BIT)) {
/*
@@ -1137,7 +1173,9 @@
" level suspend\n");
}
- if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
+ if (host->id == OMAP_MMC1_DEVID
+ && !(OMAP_HSMMC_READ(host->base, HCTL)
+ & SDVSDET)) {
OMAP_HSMMC_WRITE(host->base, HCTL,
OMAP_HSMMC_READ(host->base, HCTL)
& SDVSCLR);
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 35a98ee..f4a67c6 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -329,7 +329,7 @@
to_ptr = host->base + host->sdidata;
- while ((fifo = fifo_free(host))) {
+ while ((fifo = fifo_free(host)) > 3) {
if (!host->pio_bytes) {
res = get_data_buffer(host, &host->pio_bytes,
&host->pio_ptr);
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index f07255c..8cff5f5 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -144,8 +144,7 @@
SDHCI_QUIRK_32BIT_DMA_SIZE |
SDHCI_QUIRK_32BIT_ADMA_SIZE |
SDHCI_QUIRK_RESET_AFTER_REQUEST |
- SDHCI_QUIRK_BROKEN_SMALL_PIO |
- SDHCI_QUIRK_FORCE_HIGHSPEED;
+ SDHCI_QUIRK_BROKEN_SMALL_PIO;
}
/*
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6b2d1f9..f52f305 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1636,8 +1636,7 @@
mmc->f_max = host->max_clk;
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
- if ((caps & SDHCI_CAN_DO_HISPD) ||
- (host->quirks & SDHCI_QUIRK_FORCE_HIGHSPEED))
+ if (caps & SDHCI_CAN_DO_HISPD)
mmc->caps |= MMC_CAP_SD_HIGHSPEED;
mmc->ocr_avail = 0;
@@ -1723,7 +1722,9 @@
#endif
#ifdef SDHCI_USE_LEDS_CLASS
- host->led.name = mmc_hostname(mmc);
+ snprintf(host->led_name, sizeof(host->led_name),
+ "%s::", mmc_hostname(mmc));
+ host->led.name = host->led_name;
host->led.brightness = LED_OFF;
host->led.default_trigger = mmc_hostname(mmc);
host->led.brightness_set = sdhci_led_control;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 3efba23..ebb8365 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -208,8 +208,6 @@
#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
/* Controller has an issue with buffer bits for small transfers */
#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
-/* Controller supports high speed but doesn't have the caps bit set */
-#define SDHCI_QUIRK_FORCE_HIGHSPEED (1<<14)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
@@ -222,6 +220,7 @@
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
struct led_classdev led; /* LED control */
+ char led_name[32];
#endif
spinlock_t lock; /* Mutex */
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index c98c157..47a33ce 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -139,7 +139,8 @@
struct nand_chip *nand_chip = mtd->priv;
struct atmel_nand_host *host = nand_chip->priv;
- return gpio_get_value(host->board->rdy_pin);
+ return gpio_get_value(host->board->rdy_pin) ^
+ !!host->board->rdy_pin_active_low;
}
/*
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index f4b7c79..f3f6865 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -61,6 +61,8 @@
/* global iommu list, set NULL for ignored DMAR units */
static struct intel_iommu **g_iommus;
+static int rwbf_quirk;
+
/*
* 0: Present
* 1-11: Reserved
@@ -785,7 +787,7 @@
u32 val;
unsigned long flag;
- if (!cap_rwbf(iommu->cap))
+ if (!rwbf_quirk && !cap_rwbf(iommu->cap))
return;
val = iommu->gcmd | DMA_GCMD_WBF;
@@ -3137,3 +3139,15 @@
.unmap = intel_iommu_unmap_range,
.iova_to_phys = intel_iommu_iova_to_phys,
};
+
+static void __devinit quirk_iommu_rwbf(struct pci_dev *dev)
+{
+ /*
+ * Mobile 4 Series Chipset neglects to set RWBF capability,
+ * but needs it:
+ */
+ printk(KERN_INFO "DMAR: Forcing write-buffer flush capability\n");
+ rwbf_quirk = 1;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 44f15ff..baba2eb 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -103,14 +103,12 @@
}
}
-/*
- * Essentially, this is ((1 << (1 << x)) - 1), but without the
- * undefinedness of a << 32.
- */
static inline __attribute_const__ u32 msi_mask(unsigned x)
{
- static const u32 mask[] = { 1, 2, 4, 0xf, 0xff, 0xffff, 0xffffffff };
- return mask[x];
+ /* Don't shift by >= width of type */
+ if (x >= 5)
+ return 0xffffffff;
+ return (1 << (1 << x)) - 1;
}
static void msix_flush_writes(struct irq_desc *desc)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e3efe6b..6d61200 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1540,16 +1540,21 @@
}
/**
- * pci_request_region - Reserved PCI I/O and memory resource
+ * __pci_request_region - Reserved PCI I/O and memory resource
* @pdev: PCI device whose resources are to be reserved
* @bar: BAR to be reserved
* @res_name: Name to be associated with resource.
+ * @exclusive: whether the region access is exclusive or not
*
* Mark the PCI region associated with PCI device @pdev BR @bar as
* being reserved by owner @res_name. Do not access any
* address inside the PCI regions unless this call returns
* successfully.
*
+ * If @exclusive is set, then the region is marked so that userspace
+ * is explicitly not allowed to map the resource via /dev/mem or
+ * sysfs MMIO access.
+ *
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
*/
@@ -1588,12 +1593,12 @@
}
/**
- * pci_request_region - Reserved PCI I/O and memory resource
+ * pci_request_region - Reserve PCI I/O and memory resource
* @pdev: PCI device whose resources are to be reserved
* @bar: BAR to be reserved
- * @res_name: Name to be associated with resource.
+ * @res_name: Name to be associated with resource
*
- * Mark the PCI region associated with PCI device @pdev BR @bar as
+ * Mark the PCI region associated with PCI device @pdev BAR @bar as
* being reserved by owner @res_name. Do not access any
* address inside the PCI regions unless this call returns
* successfully.
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 26ddf78..07c0aa5 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -16,21 +16,21 @@
#endif
/**
- * Firmware PM callbacks
+ * struct pci_platform_pm_ops - Firmware PM callbacks
*
- * @is_manageable - returns 'true' if given device is power manageable by the
- * platform firmware
+ * @is_manageable: returns 'true' if given device is power manageable by the
+ * platform firmware
*
- * @set_state - invokes the platform firmware to set the device's power state
+ * @set_state: invokes the platform firmware to set the device's power state
*
- * @choose_state - returns PCI power state of given device preferred by the
- * platform; to be used during system-wide transitions from a
- * sleeping state to the working state and vice versa
+ * @choose_state: returns PCI power state of given device preferred by the
+ * platform; to be used during system-wide transitions from a
+ * sleeping state to the working state and vice versa
*
- * @can_wakeup - returns 'true' if given device is capable of waking up the
- * system from a sleeping state
+ * @can_wakeup: returns 'true' if given device is capable of waking up the
+ * system from a sleeping state
*
- * @sleep_wake - enables/disables the system wake up capability of given device
+ * @sleep_wake: enables/disables the system wake up capability of given device
*
* If given platform is generally capable of power managing PCI devices, all of
* these callbacks are mandatory.
diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index 29cbe47..36864a9 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -55,6 +55,7 @@
/**
* pci_get_rom_size - obtain the actual size of the ROM image
+ * @pdev: target PCI device
* @rom: kernel virtual pointer to image of ROM
* @size: size of PCI window
* return: size of actual ROM image
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 9436311..b3866ad 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -62,6 +62,7 @@
depends on EXPERIMENTAL
depends on BACKLIGHT_CLASS_DEVICE
depends on RFKILL
+ depends on POWER_SUPPLY
default n
---help---
This driver adds support for rfkill and backlight control to Dell
@@ -301,6 +302,7 @@
config EEEPC_LAPTOP
tristate "Eee PC Hotkey Driver (EXPERIMENTAL)"
depends on ACPI
+ depends on INPUT
depends on EXPERIMENTAL
select BACKLIGHT_CLASS_DEVICE
select HWMON
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index 65dc415..45940f3 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -166,6 +166,7 @@
struct platform_device *pf_device;
struct kfifo *fifo;
spinlock_t fifo_lock;
+ int rfkill_supported;
int rfkill_state;
int logolamp_registered;
int kblamps_registered;
@@ -526,7 +527,7 @@
show_lid_state(struct device *dev,
struct device_attribute *attr, char *buf)
{
- if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD)
+ if (!(fujitsu_hotkey->rfkill_supported & 0x100))
return sprintf(buf, "unknown\n");
if (fujitsu_hotkey->rfkill_state & 0x100)
return sprintf(buf, "open\n");
@@ -538,7 +539,7 @@
show_dock_state(struct device *dev,
struct device_attribute *attr, char *buf)
{
- if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD)
+ if (!(fujitsu_hotkey->rfkill_supported & 0x200))
return sprintf(buf, "unknown\n");
if (fujitsu_hotkey->rfkill_state & 0x200)
return sprintf(buf, "docked\n");
@@ -550,7 +551,7 @@
show_radios_state(struct device *dev,
struct device_attribute *attr, char *buf)
{
- if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD)
+ if (!(fujitsu_hotkey->rfkill_supported & 0x20))
return sprintf(buf, "unknown\n");
if (fujitsu_hotkey->rfkill_state & 0x20)
return sprintf(buf, "on\n");
@@ -928,8 +929,17 @@
; /* No action, result is discarded */
vdbg_printk(FUJLAPTOP_DBG_INFO, "Discarded %i ringbuffer entries\n", i);
- fujitsu_hotkey->rfkill_state =
- call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
+ fujitsu_hotkey->rfkill_supported =
+ call_fext_func(FUNC_RFKILL, 0x0, 0x0, 0x0);
+
+ /* Make sure our bitmask of supported functions is cleared if the
+ RFKILL function block is not implemented, like on the S7020. */
+ if (fujitsu_hotkey->rfkill_supported == UNSUPPORTED_CMD)
+ fujitsu_hotkey->rfkill_supported = 0;
+
+ if (fujitsu_hotkey->rfkill_supported)
+ fujitsu_hotkey->rfkill_state =
+ call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
/* Suspect this is a keymap of the application panel, print it */
printk(KERN_INFO "fujitsu-laptop: BTNI: [0x%x]\n",
@@ -1005,8 +1015,9 @@
input = fujitsu_hotkey->input;
- fujitsu_hotkey->rfkill_state =
- call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
+ if (fujitsu_hotkey->rfkill_supported)
+ fujitsu_hotkey->rfkill_state =
+ call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
switch (event) {
case ACPI_FUJITSU_NOTIFY_CODE1:
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index 1fd8f21..4377e93 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -280,8 +280,11 @@
rc = 0;
for (offset = sizeof(struct sccb_header); offset < sccb->length;
offset += evbuf->length) {
- /* Search for event handler */
evbuf = (struct evbuf_header *) ((addr_t) sccb + offset);
+ /* Check for malformed hardware response */
+ if (evbuf->length == 0)
+ break;
+ /* Search for event handler */
reg = NULL;
list_for_each(l, &sclp_reg_list) {
reg = list_entry(l, struct sclp_register, list);
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index 5063904..77ab6e3 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -19,6 +19,7 @@
#include <linux/memory.h>
#include <asm/chpid.h>
#include <asm/sclp.h>
+#include <asm/setup.h>
#include "sclp.h"
@@ -474,6 +475,10 @@
goto skip_add;
if (start + size > VMEM_MAX_PHYS)
size = VMEM_MAX_PHYS - start;
+ if (memory_end_set && (start >= memory_end))
+ goto skip_add;
+ if (memory_end_set && (start + size > memory_end))
+ size = memory_end - start;
add_memory(0, start, size);
skip_add:
first_rn = rn;
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index a1a511b..ed1e728 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -1573,9 +1573,6 @@
vfc_cmd->resp_len = sizeof(vfc_cmd->rsp);
vfc_cmd->cancel_key = (unsigned long)cmnd->device->hostdata;
vfc_cmd->tgt_scsi_id = rport->port_id;
- if ((rport->supported_classes & FC_COS_CLASS3) &&
- (fc_host_supported_classes(vhost->host) & FC_COS_CLASS3))
- vfc_cmd->flags = IBMVFC_CLASS_3_ERR;
vfc_cmd->iu.xfer_len = scsi_bufflen(cmnd);
int_to_scsilun(cmnd->device->lun, &vfc_cmd->iu.lun);
memcpy(vfc_cmd->iu.cdb, cmnd->cmnd, cmnd->cmd_len);
@@ -3266,6 +3263,7 @@
return -ENOMEM;
}
+ memset(tgt, 0, sizeof(*tgt));
tgt->scsi_id = scsi_id;
tgt->new_scsi_id = scsi_id;
tgt->vhost = vhost;
@@ -3576,9 +3574,18 @@
static void ibmvfc_tgt_add_rport(struct ibmvfc_target *tgt)
{
struct ibmvfc_host *vhost = tgt->vhost;
- struct fc_rport *rport;
+ struct fc_rport *rport = tgt->rport;
unsigned long flags;
+ if (rport) {
+ tgt_dbg(tgt, "Setting rport roles\n");
+ fc_remote_port_rolechg(rport, tgt->ids.roles);
+ spin_lock_irqsave(vhost->host->host_lock, flags);
+ ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+ return;
+ }
+
tgt_dbg(tgt, "Adding rport\n");
rport = fc_remote_port_add(vhost->host, 0, &tgt->ids);
spin_lock_irqsave(vhost->host->host_lock, flags);
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index 87dafd0..b21e071 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -32,7 +32,7 @@
#define IBMVFC_DRIVER_VERSION "1.0.4"
#define IBMVFC_DRIVER_DATE "(November 14, 2008)"
-#define IBMVFC_DEFAULT_TIMEOUT 15
+#define IBMVFC_DEFAULT_TIMEOUT 60
#define IBMVFC_INIT_TIMEOUT 120
#define IBMVFC_MAX_REQUESTS_DEFAULT 100
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 74d07d1..c9aa761 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -432,6 +432,7 @@
sdev_printk(KERN_ERR, cmd->device,
"Can't allocate memory "
"for indirect table\n");
+ scsi_dma_unmap(cmd);
return 0;
}
}
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 257c241..809d32d 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1998,6 +1998,8 @@
if (!shost->can_queue)
shost->can_queue = ISCSI_DEF_XMIT_CMDS_MAX;
+ if (!shost->transportt->eh_timed_out)
+ shost->transportt->eh_timed_out = iscsi_eh_cmd_timed_out;
return scsi_add_host(shost, pdev);
}
EXPORT_SYMBOL_GPL(iscsi_host_add);
@@ -2020,7 +2022,6 @@
shost = scsi_host_alloc(sht, sizeof(struct iscsi_host) + dd_data_size);
if (!shost)
return NULL;
- shost->transportt->eh_timed_out = iscsi_eh_cmd_timed_out;
if (qdepth > ISCSI_MAX_CMD_PER_LUN || qdepth < 1) {
if (qdepth != 0)
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index a8f30bd..a730248 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5258,6 +5258,7 @@
sizeof(struct lpfc_name));
break;
default:
+ kfree(els_data);
return;
}
memcpy(els_data->wwpn, &ndlp->nlp_portname, sizeof(struct lpfc_name));
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 33a3c13..f4c5722 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1265,13 +1265,6 @@
test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags))
msleep(1000);
- if (ha->mqenable) {
- if (qla25xx_delete_queues(vha, 0) != QLA_SUCCESS)
- qla_printk(KERN_WARNING, ha,
- "Queue delete failed.\n");
- vha->req_ques[0] = ha->req_q_map[0]->id;
- }
-
qla24xx_disable_vp(vha);
fc_remove_host(vha->host);
@@ -1293,6 +1286,12 @@
vha->host_no, vha->vp_idx, vha));
}
+ if (ha->mqenable) {
+ if (qla25xx_delete_queues(vha, 0) != QLA_SUCCESS)
+ qla_printk(KERN_WARNING, ha,
+ "Queue delete failed.\n");
+ }
+
scsi_host_put(vha->host);
qla_printk(KERN_INFO, ha, "vport %d deleted\n", id);
return 0;
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 023ee77..e0c5bb5 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2135,6 +2135,7 @@
/* Work events. */
enum qla_work_type {
QLA_EVT_AEN,
+ QLA_EVT_IDC_ACK,
};
@@ -2149,6 +2150,10 @@
enum fc_host_event_code code;
u32 data;
} aen;
+ struct {
+#define QLA_IDC_ACK_REGS 7
+ uint16_t mb[QLA_IDC_ACK_REGS];
+ } idc_ack;
} u;
};
diff --git a/drivers/scsi/qla2xxx/qla_devtbl.h b/drivers/scsi/qla2xxx/qla_devtbl.h
index d78d35e..d6ea69d 100644
--- a/drivers/scsi/qla2xxx/qla_devtbl.h
+++ b/drivers/scsi/qla2xxx/qla_devtbl.h
@@ -72,7 +72,7 @@
"QLA2462", "Sun PCI-X 2.0 to 4Gb FC, Dual Channel", /* 0x141 */
"QLE2460", "Sun PCI-Express to 2Gb FC, Single Channel", /* 0x142 */
"QLE2462", "Sun PCI-Express to 4Gb FC, Single Channel", /* 0x143 */
- "QEM2462" "Server I/O Module 4Gb FC, Dual Channel", /* 0x144 */
+ "QEM2462", "Server I/O Module 4Gb FC, Dual Channel", /* 0x144 */
"QLE2440", "PCI-Express to 4Gb FC, Single Channel", /* 0x145 */
"QLE2464", "PCI-Express to 4Gb FC, Quad Channel", /* 0x146 */
"QLA2440", "PCI-X 2.0 to 4Gb FC, Single Channel", /* 0x147 */
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 7abb045..ffff425 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1402,6 +1402,8 @@
#define MBA_IDC_NOTIFY 0x8101
#define MBA_IDC_TIME_EXT 0x8102
+#define MBC_IDC_ACK 0x101
+
struct nvram_81xx {
/* NVRAM header. */
uint8_t id[4];
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index a336b4b..6de283f 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -72,6 +72,7 @@
extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
extern int qla2x00_post_aen_work(struct scsi_qla_host *, enum
fc_host_event_code, u32);
+extern int qla2x00_post_idc_ack_work(struct scsi_qla_host *, uint16_t *);
extern void qla2x00_abort_fcport_cmds(fc_port_t *);
extern struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *,
@@ -266,6 +267,8 @@
extern int qla84xx_verify_chip(struct scsi_qla_host *, uint16_t *);
+extern int qla81xx_idc_ack(scsi_qla_host_t *, uint16_t *);
+
/*
* Global Function Prototypes in qla_isr.c source file.
*/
@@ -376,10 +379,8 @@
/* Globa function prototypes for multi-q */
extern int qla25xx_request_irq(struct rsp_que *);
-extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *,
- uint8_t);
-extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *,
- uint8_t);
+extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *);
+extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *);
extern int qla25xx_create_req_que(struct qla_hw_data *, uint16_t, uint8_t,
uint16_t, uint8_t, uint8_t);
extern int qla25xx_create_rsp_que(struct qla_hw_data *, uint16_t, uint8_t,
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index f6368a1..9865017 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1226,9 +1226,8 @@
icb->firmware_options_2 |=
__constant_cpu_to_le32(BIT_18);
- icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_22);
+ icb->firmware_options_2 &= __constant_cpu_to_le32(~BIT_22);
icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_23);
- ha->rsp_q_map[0]->options = icb->firmware_options_2;
WRT_REG_DWORD(®->isp25mq.req_q_in, 0);
WRT_REG_DWORD(®->isp25mq.req_q_out, 0);
@@ -3493,7 +3492,7 @@
rsp = ha->rsp_q_map[i];
if (rsp) {
rsp->options &= ~BIT_0;
- ret = qla25xx_init_rsp_que(base_vha, rsp, rsp->options);
+ ret = qla25xx_init_rsp_que(base_vha, rsp);
if (ret != QLA_SUCCESS)
DEBUG2_17(printk(KERN_WARNING
"%s Rsp que:%d init failed\n", __func__,
@@ -3507,7 +3506,7 @@
if (req) {
/* Clear outstanding commands array. */
req->options &= ~BIT_0;
- ret = qla25xx_init_req_que(base_vha, req, req->options);
+ ret = qla25xx_init_req_que(base_vha, req);
if (ret != QLA_SUCCESS)
DEBUG2_17(printk(KERN_WARNING
"%s Req que:%d init failed\n", __func__,
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index e28ad81..f250e5b 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -266,6 +266,40 @@
}
}
+static void
+qla81xx_idc_event(scsi_qla_host_t *vha, uint16_t aen, uint16_t descr)
+{
+ static char *event[] =
+ { "Complete", "Request Notification", "Time Extension" };
+ int rval;
+ struct device_reg_24xx __iomem *reg24 = &vha->hw->iobase->isp24;
+ uint16_t __iomem *wptr;
+ uint16_t cnt, timeout, mb[QLA_IDC_ACK_REGS];
+
+ /* Seed data -- mailbox1 -> mailbox7. */
+ wptr = (uint16_t __iomem *)®24->mailbox1;
+ for (cnt = 0; cnt < QLA_IDC_ACK_REGS; cnt++, wptr++)
+ mb[cnt] = RD_REG_WORD(wptr);
+
+ DEBUG2(printk("scsi(%ld): Inter-Driver Commucation %s -- "
+ "%04x %04x %04x %04x %04x %04x %04x.\n", vha->host_no,
+ event[aen & 0xff],
+ mb[0], mb[1], mb[2], mb[3], mb[4], mb[5], mb[6]));
+
+ /* Acknowledgement needed? [Notify && non-zero timeout]. */
+ timeout = (descr >> 8) & 0xf;
+ if (aen != MBA_IDC_NOTIFY || !timeout)
+ return;
+
+ DEBUG2(printk("scsi(%ld): Inter-Driver Commucation %s -- "
+ "ACK timeout=%d.\n", vha->host_no, event[aen & 0xff], timeout));
+
+ rval = qla2x00_post_idc_ack_work(vha, mb);
+ if (rval != QLA_SUCCESS)
+ qla_printk(KERN_WARNING, vha->hw,
+ "IDC failed to post ACK.\n");
+}
+
/**
* qla2x00_async_event() - Process aynchronous events.
* @ha: SCSI driver HA context
@@ -714,21 +748,9 @@
"%04x %04x %04x\n", vha->host_no, mb[1], mb[2], mb[3]));
break;
case MBA_IDC_COMPLETE:
- DEBUG2(printk("scsi(%ld): Inter-Driver Commucation "
- "Complete -- %04x %04x %04x\n", vha->host_no, mb[1], mb[2],
- mb[3]));
- break;
case MBA_IDC_NOTIFY:
- DEBUG2(printk("scsi(%ld): Inter-Driver Commucation "
- "Request Notification -- %04x %04x %04x\n", vha->host_no,
- mb[1], mb[2], mb[3]));
- /**** Mailbox registers 4 - 7 valid!!! */
- break;
case MBA_IDC_TIME_EXT:
- DEBUG2(printk("scsi(%ld): Inter-Driver Commucation "
- "Time Extension -- %04x %04x %04x\n", vha->host_no, mb[1],
- mb[2], mb[3]));
- /**** Mailbox registers 4 - 7 valid!!! */
+ qla81xx_idc_event(vha, mb[0], mb[1]);
break;
}
@@ -1707,7 +1729,6 @@
struct qla_hw_data *ha;
struct rsp_que *rsp;
struct device_reg_24xx __iomem *reg;
- uint16_t msix_disabled_hccr = 0;
rsp = (struct rsp_que *) dev_id;
if (!rsp) {
@@ -1720,17 +1741,8 @@
spin_lock_irq(&ha->hardware_lock);
- msix_disabled_hccr = rsp->options;
- if (!rsp->id)
- msix_disabled_hccr &= __constant_cpu_to_le32(BIT_22);
- else
- msix_disabled_hccr &= __constant_cpu_to_le32(BIT_6);
-
qla24xx_process_response_queue(rsp);
- if (!msix_disabled_hccr)
- WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT);
-
spin_unlock_irq(&ha->hardware_lock);
return IRQ_HANDLED;
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index f94ffbb..4c7504c 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -3090,8 +3090,7 @@
}
int
-qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req,
- uint8_t options)
+qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req)
{
int rval;
unsigned long flags;
@@ -3101,7 +3100,7 @@
struct qla_hw_data *ha = vha->hw;
mcp->mb[0] = MBC_INITIALIZE_MULTIQ;
- mcp->mb[1] = options;
+ mcp->mb[1] = req->options;
mcp->mb[2] = MSW(LSD(req->dma));
mcp->mb[3] = LSW(LSD(req->dma));
mcp->mb[6] = MSW(MSD(req->dma));
@@ -3128,7 +3127,7 @@
mcp->tov = 60;
spin_lock_irqsave(&ha->hardware_lock, flags);
- if (!(options & BIT_0)) {
+ if (!(req->options & BIT_0)) {
WRT_REG_DWORD(®->req_q_in, 0);
WRT_REG_DWORD(®->req_q_out, 0);
}
@@ -3142,8 +3141,7 @@
}
int
-qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp,
- uint8_t options)
+qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp)
{
int rval;
unsigned long flags;
@@ -3153,7 +3151,7 @@
struct qla_hw_data *ha = vha->hw;
mcp->mb[0] = MBC_INITIALIZE_MULTIQ;
- mcp->mb[1] = options;
+ mcp->mb[1] = rsp->options;
mcp->mb[2] = MSW(LSD(rsp->dma));
mcp->mb[3] = LSW(LSD(rsp->dma));
mcp->mb[6] = MSW(MSD(rsp->dma));
@@ -3178,7 +3176,7 @@
mcp->tov = 60;
spin_lock_irqsave(&ha->hardware_lock, flags);
- if (!(options & BIT_0)) {
+ if (!(rsp->options & BIT_0)) {
WRT_REG_DWORD(®->rsp_q_out, 0);
WRT_REG_DWORD(®->rsp_q_in, 0);
}
@@ -3193,3 +3191,29 @@
return rval;
}
+int
+qla81xx_idc_ack(scsi_qla_host_t *vha, uint16_t *mb)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+ mcp->mb[0] = MBC_IDC_ACK;
+ memcpy(&mcp->mb[1], mb, QLA_IDC_ACK_REGS * sizeof(uint16_t));
+ mcp->out_mb = MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+
+ if (rval != QLA_SUCCESS) {
+ DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
+ vha->host_no, rval, mcp->mb[0]));
+ } else {
+ DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+ }
+
+ return rval;
+}
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index f53179c..3f23932 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -396,7 +396,7 @@
qla2x00_start_timer(vha, qla2x00_timer, WATCH_INTERVAL);
- memset(vha->req_ques, 0, sizeof(vha->req_ques) * QLA_MAX_HOST_QUES);
+ memset(vha->req_ques, 0, sizeof(vha->req_ques));
vha->req_ques[0] = ha->req_q_map[0]->id;
host->can_queue = ha->req_q_map[0]->length + 128;
host->this_id = 255;
@@ -471,7 +471,7 @@
if (req) {
req->options |= BIT_0;
- ret = qla25xx_init_req_que(vha, req, req->options);
+ ret = qla25xx_init_req_que(vha, req);
}
if (ret == QLA_SUCCESS)
qla25xx_free_req_que(vha, req);
@@ -486,7 +486,7 @@
if (rsp) {
rsp->options |= BIT_0;
- ret = qla25xx_init_rsp_que(vha, rsp, rsp->options);
+ ret = qla25xx_init_rsp_que(vha, rsp);
}
if (ret == QLA_SUCCESS)
qla25xx_free_rsp_que(vha, rsp);
@@ -502,7 +502,7 @@
req->options |= BIT_3;
req->qos = qos;
- ret = qla25xx_init_req_que(vha, req, req->options);
+ ret = qla25xx_init_req_que(vha, req);
if (ret != QLA_SUCCESS)
DEBUG2_17(printk(KERN_WARNING "%s failed\n", __func__));
/* restore options bit */
@@ -632,7 +632,7 @@
req->max_q_depth = ha->req_q_map[0]->max_q_depth;
mutex_unlock(&ha->vport_lock);
- ret = qla25xx_init_req_que(base_vha, req, options);
+ ret = qla25xx_init_req_que(base_vha, req);
if (ret != QLA_SUCCESS) {
qla_printk(KERN_WARNING, ha, "%s failed\n", __func__);
mutex_lock(&ha->vport_lock);
@@ -710,7 +710,7 @@
if (ret)
goto que_failed;
- ret = qla25xx_init_rsp_que(base_vha, rsp, options);
+ ret = qla25xx_init_rsp_que(base_vha, rsp);
if (ret != QLA_SUCCESS) {
qla_printk(KERN_WARNING, ha, "%s failed\n", __func__);
mutex_lock(&ha->vport_lock);
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index c11f872..2f5f725 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2522,6 +2522,19 @@
return qla2x00_post_work(vha, e, 1);
}
+int
+qla2x00_post_idc_ack_work(struct scsi_qla_host *vha, uint16_t *mb)
+{
+ struct qla_work_evt *e;
+
+ e = qla2x00_alloc_work(vha, QLA_EVT_IDC_ACK, 1);
+ if (!e)
+ return QLA_FUNCTION_FAILED;
+
+ memcpy(e->u.idc_ack.mb, mb, QLA_IDC_ACK_REGS * sizeof(uint16_t));
+ return qla2x00_post_work(vha, e, 1);
+}
+
static void
qla2x00_do_work(struct scsi_qla_host *vha)
{
@@ -2539,6 +2552,9 @@
fc_host_post_event(vha->host, fc_get_event_number(),
e->u.aen.code, e->u.aen.data);
break;
+ case QLA_EVT_IDC_ACK:
+ qla81xx_idc_ack(vha, e->u.idc_ack.mb);
+ break;
}
if (e->flags & QLA_EVT_FLAG_FREE)
kfree(e);
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 9c3b694..2848279 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -684,7 +684,7 @@
"end=0x%x size=0x%x.\n", le32_to_cpu(region->code), start,
le32_to_cpu(region->end) >> 2, le32_to_cpu(region->size)));
- switch (le32_to_cpu(region->code)) {
+ switch (le32_to_cpu(region->code) & 0xff) {
case FLT_REG_FW:
ha->flt_region_fw = start;
break;
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index cfa4c11..79f7053 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.00-k2"
+#define QLA2XXX_VERSION "8.03.00-k3"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 66505bb..8f4de20 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -317,6 +317,7 @@
return sdev;
out_device_destroy:
+ scsi_device_set_state(sdev, SDEV_DEL);
transport_destroy_device(&sdev->sdev_gendev);
put_device(&sdev->sdev_gendev);
out:
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 8f0bd3f..516925d 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1078,7 +1078,7 @@
case BLKTRACESETUP:
return blk_trace_setup(sdp->device->request_queue,
sdp->disk->disk_name,
- sdp->device->sdev_gendev.devt,
+ MKDEV(SCSI_GENERIC_MAJOR, sdp->index),
(char *)arg);
case BLKTRACESTART:
return blk_trace_startstop(sdp->device->request_queue, 1);
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 0d934bf..b4b3981 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2083,6 +2083,20 @@
serial8250_set_mctrl(&up->port, up->port.mctrl);
+ /* Serial over Lan (SoL) hack:
+ Intel 8257x Gigabit ethernet chips have a
+ 16550 emulation, to be used for Serial Over Lan.
+ Those chips take a longer time than a normal
+ serial device to signalize that a transmission
+ data was queued. Due to that, the above test generally
+ fails. One solution would be to delay the reading of
+ iir. However, this is not reliable, since the timeout
+ is variable. So, let's just don't test if we receive
+ TX irq. This way, we'll never enable UART_BUG_TXEN.
+ */
+ if (up->port.flags & UPF_NO_TXEN_TEST)
+ goto dont_test_tx_en;
+
/*
* Do a quick test to see if we receive an
* interrupt when we enable the TX irq.
@@ -2102,6 +2116,7 @@
up->bugs &= ~UART_BUG_TXEN;
}
+dont_test_tx_en:
spin_unlock_irqrestore(&up->port.lock, flags);
/*
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 536d8e5..533f820 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -798,6 +798,21 @@
return setup_port(priv, port, bar, offset, board->reg_shift);
}
+static int skip_tx_en_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ port->flags |= UPF_NO_TXEN_TEST;
+ printk(KERN_DEBUG "serial8250: skipping TxEn test for device "
+ "[%04x:%04x] subsystem [%04x:%04x]\n",
+ priv->dev->vendor,
+ priv->dev->device,
+ priv->dev->subsystem_vendor,
+ priv->dev->subsystem_device);
+
+ return pci_default_setup(priv, board, port, idx);
+}
+
/* This should be in linux/pci_ids.h */
#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
@@ -864,6 +879,27 @@
.init = pci_inteli960ni_init,
.setup = pci_default_setup,
},
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_8257X_SOL,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = skip_tx_en_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82573L_SOL,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = skip_tx_en_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82573E_SOL,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = skip_tx_en_setup,
+ },
/*
* ITE
*/
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 89362d7..8f58f7f 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -877,6 +877,10 @@
}
}
+ /* Save current CSR for comparison in atmel_tasklet_func() */
+ atmel_port->irq_status_prev = UART_GET_CSR(port);
+ atmel_port->irq_status = atmel_port->irq_status_prev;
+
/*
* Finally, enable the serial port
*/
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 92187e2..ac79cbe 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -84,6 +84,8 @@
brd->pci_dev = pdev;
if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM)
brd->maxports = 4;
+ else if (pdev->device == PCI_DEVICE_ID_DIGI_NEO_8)
+ brd->maxports = 8;
else
brd->maxports = 2;
@@ -212,6 +214,7 @@
{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 },
{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 },
{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 },
+ { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_NEO_8), 0, 0, 5 },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, jsm_pci_tbl);
diff --git a/drivers/spi/spi_gpio.c b/drivers/spi/spi_gpio.c
index 49698ca..f5ed972 100644
--- a/drivers/spi/spi_gpio.c
+++ b/drivers/spi/spi_gpio.c
@@ -114,7 +114,7 @@
static inline int getmiso(const struct spi_device *spi)
{
- return gpio_get_value(SPI_MISO_GPIO);
+ return !!gpio_get_value(SPI_MISO_GPIO);
}
#undef pdata
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index c54fc40..a4301dc 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -298,19 +298,6 @@
EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
/**
- * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled
- * @dev: USB Host Controller being resumed
- *
- * Store this function in the HCD's struct pci_driver as .resume_early.
- */
-int usb_hcd_pci_resume_early(struct pci_dev *dev)
-{
- pci_restore_state(dev);
- return 0;
-}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early);
-
-/**
* usb_hcd_pci_resume - power management resume of a PCI-based HCD
* @dev: USB Host Controller being resumed
*
@@ -333,6 +320,8 @@
}
#endif
+ pci_restore_state(dev);
+
hcd = pci_get_drvdata(dev);
if (hcd->state != HC_STATE_SUSPENDED) {
dev_dbg(hcd->self.controller,
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 5b94a56..f750eb1 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -257,7 +257,6 @@
#ifdef CONFIG_PM
extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
-extern int usb_hcd_pci_resume_early(struct pci_dev *dev);
extern int usb_hcd_pci_resume(struct pci_dev *dev);
#endif /* CONFIG_PM */
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 9b36205..0ce4e28 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -904,8 +904,8 @@
/* most IN status is the same, but ISO can't stall */
*ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR
- | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
- ? 0 : UDCCS_BI_SST;
+ | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
+ ? 0 : UDCCS_BI_SST);
}
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index bb21fb0..abb9a77 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -432,7 +432,6 @@
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
- .resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif
.shutdown = usb_hcd_pci_shutdown,
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 5d625c3..f9961b4 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -487,7 +487,6 @@
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
- .resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 944f7e0..cf5e4cf 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -942,7 +942,6 @@
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
- .resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif /* PM */
};
diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c
index 2291c5f..958751c 100644
--- a/drivers/usb/host/whci/asl.c
+++ b/drivers/usb/host/whci/asl.c
@@ -227,13 +227,13 @@
* Now that the ASL is updated, complete the removal of any
* removed qsets.
*/
- spin_lock(&whc->lock);
+ spin_lock_irq(&whc->lock);
list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) {
qset_remove_complete(whc, qset);
}
- spin_unlock(&whc->lock);
+ spin_unlock_irq(&whc->lock);
}
/**
diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c
index 7dc85a0..df8b85f 100644
--- a/drivers/usb/host/whci/pzl.c
+++ b/drivers/usb/host/whci/pzl.c
@@ -255,13 +255,13 @@
* Now that the PZL is updated, complete the removal of any
* removed qsets.
*/
- spin_lock(&whc->lock);
+ spin_lock_irq(&whc->lock);
list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) {
qset_remove_complete(whc, qset);
}
- spin_unlock(&whc->lock);
+ spin_unlock_irq(&whc->lock);
}
/**
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index bf0af66..fb19803 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1054,10 +1054,7 @@
config FB_I810
tristate "Intel 810/815 support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PCI && X86_32
- select AGP
- select AGP_INTEL
- select FB
+ depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
@@ -1120,10 +1117,7 @@
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PCI && X86
- select FB
- select AGP
- select AGP_INTEL
+ depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index e6e299f..2181ce4 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -2365,7 +2365,6 @@
static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
{
u32 pmgt;
- u16 pwr_command;
struct pci_dev *pdev = par->pdev;
if (!par->pm_reg)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 09a3d55..325c10f 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -406,7 +406,7 @@
---help---
Hardware driver for the intel TCO timer based watchdog devices.
These drivers are included in the Intel 82801 I/O Controller
- Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB
+ Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
controller hub.
The TCO (Total Cost of Ownership) timer is a watchdog timer
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index 5531691..e35d545 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -107,10 +107,10 @@
static int at91_wdt_settimeout(int new_time)
{
/*
- * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz
+ * All counting occurs at SLOW_CLOCK / 128 = 256 Hz
*
* Since WDV is a 16-bit counter, the maximum period is
- * 65536 / 0.256 = 256 seconds.
+ * 65536 / 256 = 256 seconds.
*/
if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
return -EINVAL;
diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
index b1da287..a56ac84 100644
--- a/drivers/watchdog/at91sam9_wdt.c
+++ b/drivers/watchdog/at91sam9_wdt.c
@@ -18,6 +18,7 @@
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c
index 2474ebc..d8264ad 100644
--- a/drivers/watchdog/iTCO_vendor_support.c
+++ b/drivers/watchdog/iTCO_vendor_support.c
@@ -1,7 +1,7 @@
/*
* intel TCO vendor specific watchdog driver support
*
- * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
+ * (c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -19,7 +19,7 @@
/* Module and version information */
#define DRV_NAME "iTCO_vendor_support"
-#define DRV_VERSION "1.02"
+#define DRV_VERSION "1.03"
#define PFX DRV_NAME ": "
/* Includes */
@@ -77,6 +77,26 @@
* 20.6 seconds.
*/
+static void supermicro_old_pre_start(unsigned long acpibase)
+{
+ unsigned long val32;
+
+ /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+ val32 = inl(SMI_EN);
+ val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
+ outl(val32, SMI_EN); /* Needed to activate watchdog */
+}
+
+static void supermicro_old_pre_stop(unsigned long acpibase)
+{
+ unsigned long val32;
+
+ /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
+ val32 = inl(SMI_EN);
+ val32 |= 0x00002000; /* Turn on SMI clearing watchdog */
+ outl(val32, SMI_EN); /* Needed to deactivate watchdog */
+}
+
static void supermicro_old_pre_keepalive(unsigned long acpibase)
{
/* Reload TCO Timer (done in iTCO_wdt_keepalive) + */
@@ -228,14 +248,18 @@
void iTCO_vendor_pre_start(unsigned long acpibase,
unsigned int heartbeat)
{
- if (vendorsupport == SUPERMICRO_NEW_BOARD)
+ if (vendorsupport == SUPERMICRO_OLD_BOARD)
+ supermicro_old_pre_start(acpibase);
+ else if (vendorsupport == SUPERMICRO_NEW_BOARD)
supermicro_new_pre_start(heartbeat);
}
EXPORT_SYMBOL(iTCO_vendor_pre_start);
void iTCO_vendor_pre_stop(unsigned long acpibase)
{
- if (vendorsupport == SUPERMICRO_NEW_BOARD)
+ if (vendorsupport == SUPERMICRO_OLD_BOARD)
+ supermicro_old_pre_stop(acpibase);
+ else if (vendorsupport == SUPERMICRO_NEW_BOARD)
supermicro_new_pre_stop();
}
EXPORT_SYMBOL(iTCO_vendor_pre_stop);
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 5b395a4..3523349 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -1,7 +1,7 @@
/*
- * intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets)
+ * intel TCO Watchdog Driver (Used in i82801 and i63xxESB chipsets)
*
- * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
+ * (c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -63,7 +63,7 @@
/* Module and version information */
#define DRV_NAME "iTCO_wdt"
-#define DRV_VERSION "1.04"
+#define DRV_VERSION "1.05"
#define PFX DRV_NAME ": "
/* Includes */
@@ -236,16 +236,16 @@
/* Address definitions for the TCO */
/* TCO base address */
-#define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60
+#define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60
/* SMI Control and Enable Register */
-#define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30
+#define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30
#define TCO_RLD TCOBASE + 0x00 /* TCO Timer Reload and Curr. Value */
#define TCOv1_TMR TCOBASE + 0x01 /* TCOv1 Timer Initial Value */
-#define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */
-#define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */
-#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */
-#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */
+#define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */
+#define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */
+#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */
+#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */
#define TCO1_CNT TCOBASE + 0x08 /* TCO1 Control Register */
#define TCO2_CNT TCOBASE + 0x0a /* TCO2 Control Register */
#define TCOv2_TMR TCOBASE + 0x12 /* TCOv2 Timer Initial Value */
@@ -338,7 +338,6 @@
static int iTCO_wdt_start(void)
{
unsigned int val;
- unsigned long val32;
spin_lock(&iTCO_wdt_private.io_lock);
@@ -351,11 +350,6 @@
return -EIO;
}
- /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
- val32 = inl(SMI_EN);
- val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
- outl(val32, SMI_EN);
-
/* Force the timer to its reload value by writing to the TCO_RLD
register */
if (iTCO_wdt_private.iTCO_version == 2)
@@ -378,7 +372,6 @@
static int iTCO_wdt_stop(void)
{
unsigned int val;
- unsigned long val32;
spin_lock(&iTCO_wdt_private.io_lock);
@@ -390,11 +383,6 @@
outw(val, TCO1_CNT);
val = inw(TCO1_CNT);
- /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
- val32 = inl(SMI_EN);
- val32 |= 0x00002000;
- outl(val32, SMI_EN);
-
/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
iTCO_wdt_set_NO_REBOOT_bit();
@@ -649,6 +637,7 @@
int ret;
u32 base_address;
unsigned long RCBA;
+ unsigned long val32;
/*
* Find the ACPI/PM base I/O address which is the base
@@ -695,6 +684,10 @@
ret = -EIO;
goto out;
}
+ /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+ val32 = inl(SMI_EN);
+ val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
+ outl(val32, SMI_EN);
/* The TCO I/O registers reside in a 32-byte range pointed to
by the TCOBASE value */
diff --git a/fs/bio.c b/fs/bio.c
index 062299a..72ab251 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -302,9 +302,10 @@
struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs)
{
struct bio *bio = NULL;
+ void *p;
if (bs) {
- void *p = mempool_alloc(bs->bio_pool, gfp_mask);
+ p = mempool_alloc(bs->bio_pool, gfp_mask);
if (p)
bio = p + bs->front_pad;
@@ -329,7 +330,7 @@
}
if (unlikely(!bvl)) {
if (bs)
- mempool_free(bio, bs->bio_pool);
+ mempool_free(p, bs->bio_pool);
else
kfree(bio);
bio = NULL;
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 35443cc..42491d7 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -38,19 +38,12 @@
static int del_ptr(struct btrfs_trans_handle *trans, struct btrfs_root *root,
struct btrfs_path *path, int level, int slot);
-inline void btrfs_init_path(struct btrfs_path *p)
-{
- memset(p, 0, sizeof(*p));
-}
-
struct btrfs_path *btrfs_alloc_path(void)
{
struct btrfs_path *path;
- path = kmem_cache_alloc(btrfs_path_cachep, GFP_NOFS);
- if (path) {
- btrfs_init_path(path);
+ path = kmem_cache_zalloc(btrfs_path_cachep, GFP_NOFS);
+ if (path)
path->reada = 1;
- }
return path;
}
@@ -69,14 +62,38 @@
/*
* reset all the locked nodes in the patch to spinning locks.
+ *
+ * held is used to keep lockdep happy, when lockdep is enabled
+ * we set held to a blocking lock before we go around and
+ * retake all the spinlocks in the path. You can safely use NULL
+ * for held
*/
-noinline void btrfs_clear_path_blocking(struct btrfs_path *p)
+noinline void btrfs_clear_path_blocking(struct btrfs_path *p,
+ struct extent_buffer *held)
{
int i;
- for (i = 0; i < BTRFS_MAX_LEVEL; i++) {
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+ /* lockdep really cares that we take all of these spinlocks
+ * in the right order. If any of the locks in the path are not
+ * currently blocking, it is going to complain. So, make really
+ * really sure by forcing the path to blocking before we clear
+ * the path blocking.
+ */
+ if (held)
+ btrfs_set_lock_blocking(held);
+ btrfs_set_path_blocking(p);
+#endif
+
+ for (i = BTRFS_MAX_LEVEL - 1; i >= 0; i--) {
if (p->nodes[i] && p->locks[i])
btrfs_clear_lock_blocking(p->nodes[i]);
}
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+ if (held)
+ btrfs_clear_lock_blocking(held);
+#endif
}
/* this also releases the path */
@@ -286,7 +303,7 @@
trans->transid, level, &ins);
BUG_ON(ret);
cow = btrfs_init_new_buffer(trans, root, prealloc_dest,
- buf->len);
+ buf->len, level);
} else {
cow = btrfs_alloc_free_block(trans, root, buf->len,
parent_start,
@@ -917,9 +934,9 @@
/* promote the child to a root */
child = read_node_slot(root, mid, 0);
+ BUG_ON(!child);
btrfs_tree_lock(child);
btrfs_set_lock_blocking(child);
- BUG_ON(!child);
ret = btrfs_cow_block(trans, root, child, mid, 0, &child, 0);
BUG_ON(ret);
@@ -1566,7 +1583,7 @@
if (!p->skip_locking)
p->locks[level] = 1;
- btrfs_clear_path_blocking(p);
+ btrfs_clear_path_blocking(p, NULL);
/*
* we have a lock on b and as long as we aren't changing
@@ -1605,7 +1622,7 @@
btrfs_set_path_blocking(p);
sret = split_node(trans, root, p, level);
- btrfs_clear_path_blocking(p);
+ btrfs_clear_path_blocking(p, NULL);
BUG_ON(sret > 0);
if (sret) {
@@ -1625,7 +1642,7 @@
btrfs_set_path_blocking(p);
sret = balance_level(trans, root, p, level);
- btrfs_clear_path_blocking(p);
+ btrfs_clear_path_blocking(p, NULL);
if (sret) {
ret = sret;
@@ -1688,13 +1705,13 @@
if (!p->skip_locking) {
int lret;
- btrfs_clear_path_blocking(p);
+ btrfs_clear_path_blocking(p, NULL);
lret = btrfs_try_spin_lock(b);
if (!lret) {
btrfs_set_path_blocking(p);
btrfs_tree_lock(b);
- btrfs_clear_path_blocking(p);
+ btrfs_clear_path_blocking(p, b);
}
}
} else {
@@ -1706,7 +1723,7 @@
btrfs_set_path_blocking(p);
sret = split_leaf(trans, root, key,
p, ins_len, ret == 0);
- btrfs_clear_path_blocking(p);
+ btrfs_clear_path_blocking(p, NULL);
BUG_ON(sret > 0);
if (sret) {
@@ -3926,7 +3943,6 @@
btrfs_release_path(root, path);
goto again;
} else {
- btrfs_clear_path_blocking(path);
goto out;
}
}
@@ -3946,7 +3962,7 @@
path->locks[level - 1] = 1;
path->nodes[level - 1] = cur;
unlock_up(path, level, 1);
- btrfs_clear_path_blocking(path);
+ btrfs_clear_path_blocking(path, NULL);
}
out:
if (ret == 0)
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 531db11..766b31a 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -43,11 +43,7 @@
#define BTRFS_ACL_NOT_CACHED ((void *)-1)
-#ifdef CONFIG_LOCKDEP
-# define BTRFS_MAX_LEVEL 7
-#else
-# define BTRFS_MAX_LEVEL 8
-#endif
+#define BTRFS_MAX_LEVEL 8
/* holds pointers to all of the tree roots */
#define BTRFS_ROOT_TREE_OBJECTID 1ULL
@@ -1715,7 +1711,8 @@
u64 empty_size);
struct extent_buffer *btrfs_init_new_buffer(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
- u64 bytenr, u32 blocksize);
+ u64 bytenr, u32 blocksize,
+ int level);
int btrfs_alloc_extent(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 num_bytes, u64 parent, u64 min_bytes,
@@ -1834,9 +1831,7 @@
void btrfs_release_path(struct btrfs_root *root, struct btrfs_path *p);
struct btrfs_path *btrfs_alloc_path(void);
void btrfs_free_path(struct btrfs_path *p);
-void btrfs_init_path(struct btrfs_path *p);
void btrfs_set_path_blocking(struct btrfs_path *p);
-void btrfs_clear_path_blocking(struct btrfs_path *p);
void btrfs_unlock_up_safe(struct btrfs_path *p, int level);
int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root,
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 5aebddd..adda739 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -75,6 +75,40 @@
struct btrfs_work work;
};
+/* These are used to set the lockdep class on the extent buffer locks.
+ * The class is set by the readpage_end_io_hook after the buffer has
+ * passed csum validation but before the pages are unlocked.
+ *
+ * The lockdep class is also set by btrfs_init_new_buffer on freshly
+ * allocated blocks.
+ *
+ * The class is based on the level in the tree block, which allows lockdep
+ * to know that lower nodes nest inside the locks of higher nodes.
+ *
+ * We also add a check to make sure the highest level of the tree is
+ * the same as our lockdep setup here. If BTRFS_MAX_LEVEL changes, this
+ * code needs update as well.
+ */
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# if BTRFS_MAX_LEVEL != 8
+# error
+# endif
+static struct lock_class_key btrfs_eb_class[BTRFS_MAX_LEVEL + 1];
+static const char *btrfs_eb_name[BTRFS_MAX_LEVEL + 1] = {
+ /* leaf */
+ "btrfs-extent-00",
+ "btrfs-extent-01",
+ "btrfs-extent-02",
+ "btrfs-extent-03",
+ "btrfs-extent-04",
+ "btrfs-extent-05",
+ "btrfs-extent-06",
+ "btrfs-extent-07",
+ /* highest possible level */
+ "btrfs-extent-08",
+};
+#endif
+
/*
* extents on the btree inode are pretty simple, there's one extent
* that covers the entire device
@@ -347,6 +381,15 @@
return ret;
}
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+void btrfs_set_buffer_lockdep_class(struct extent_buffer *eb, int level)
+{
+ lockdep_set_class_and_name(&eb->lock,
+ &btrfs_eb_class[level],
+ btrfs_eb_name[level]);
+}
+#endif
+
static int btree_readpage_end_io_hook(struct page *page, u64 start, u64 end,
struct extent_state *state)
{
@@ -392,6 +435,8 @@
}
found_level = btrfs_header_level(eb);
+ btrfs_set_buffer_lockdep_class(eb, found_level);
+
ret = csum_tree_block(root, eb, 1);
if (ret)
ret = -EIO;
@@ -1777,7 +1822,6 @@
ret = find_and_setup_root(tree_root, fs_info,
BTRFS_DEV_TREE_OBJECTID, dev_root);
dev_root->track_dirty = 1;
-
if (ret)
goto fail_extent_root;
diff --git a/fs/btrfs/disk-io.h b/fs/btrfs/disk-io.h
index 494a56e..95029db 100644
--- a/fs/btrfs/disk-io.h
+++ b/fs/btrfs/disk-io.h
@@ -101,4 +101,14 @@
int btrfs_add_log_tree(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
int btree_lock_page_hook(struct page *page);
+
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+void btrfs_set_buffer_lockdep_class(struct extent_buffer *eb, int level);
+#else
+static inline void btrfs_set_buffer_lockdep_class(struct extent_buffer *eb,
+ int level)
+{
+}
+#endif
#endif
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 7527523..0a5d796 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -1323,8 +1323,25 @@
int btrfs_extent_post_op(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
- finish_current_insert(trans, root->fs_info->extent_root, 1);
- del_pending_extents(trans, root->fs_info->extent_root, 1);
+ u64 start;
+ u64 end;
+ int ret;
+
+ while(1) {
+ finish_current_insert(trans, root->fs_info->extent_root, 1);
+ del_pending_extents(trans, root->fs_info->extent_root, 1);
+
+ /* is there more work to do? */
+ ret = find_first_extent_bit(&root->fs_info->pending_del,
+ 0, &start, &end, EXTENT_WRITEBACK);
+ if (!ret)
+ continue;
+ ret = find_first_extent_bit(&root->fs_info->extent_ins,
+ 0, &start, &end, EXTENT_WRITEBACK);
+ if (!ret)
+ continue;
+ break;
+ }
return 0;
}
@@ -2211,13 +2228,12 @@
u64 end;
u64 priv;
u64 search = 0;
- u64 skipped = 0;
struct btrfs_fs_info *info = extent_root->fs_info;
struct btrfs_path *path;
struct pending_extent_op *extent_op, *tmp;
struct list_head insert_list, update_list;
int ret;
- int num_inserts = 0, max_inserts;
+ int num_inserts = 0, max_inserts, restart = 0;
path = btrfs_alloc_path();
INIT_LIST_HEAD(&insert_list);
@@ -2233,19 +2249,19 @@
ret = find_first_extent_bit(&info->extent_ins, search, &start,
&end, EXTENT_WRITEBACK);
if (ret) {
- if (skipped && all && !num_inserts &&
+ if (restart && !num_inserts &&
list_empty(&update_list)) {
- skipped = 0;
+ restart = 0;
search = 0;
continue;
}
- mutex_unlock(&info->extent_ins_mutex);
break;
}
ret = try_lock_extent(&info->extent_ins, start, end, GFP_NOFS);
if (!ret) {
- skipped = 1;
+ if (all)
+ restart = 1;
search = end + 1;
if (need_resched()) {
mutex_unlock(&info->extent_ins_mutex);
@@ -2264,7 +2280,7 @@
list_add_tail(&extent_op->list, &insert_list);
search = end + 1;
if (num_inserts == max_inserts) {
- mutex_unlock(&info->extent_ins_mutex);
+ restart = 1;
break;
}
} else if (extent_op->type == PENDING_BACKREF_UPDATE) {
@@ -2280,7 +2296,6 @@
* somebody marked this thing for deletion then just unlock it and be
* done, the free_extents will handle it
*/
- mutex_lock(&info->extent_ins_mutex);
list_for_each_entry_safe(extent_op, tmp, &update_list, list) {
clear_extent_bits(&info->extent_ins, extent_op->bytenr,
extent_op->bytenr + extent_op->num_bytes - 1,
@@ -2302,6 +2317,10 @@
if (!list_empty(&update_list)) {
ret = update_backrefs(trans, extent_root, path, &update_list);
BUG_ON(ret);
+
+ /* we may have COW'ed new blocks, so lets start over */
+ if (all)
+ restart = 1;
}
/*
@@ -2309,9 +2328,9 @@
* need to make sure everything is cleaned then reset everything and
* go back to the beginning
*/
- if (!num_inserts && all && skipped) {
+ if (!num_inserts && restart) {
search = 0;
- skipped = 0;
+ restart = 0;
INIT_LIST_HEAD(&update_list);
INIT_LIST_HEAD(&insert_list);
goto again;
@@ -2368,27 +2387,19 @@
BUG_ON(ret);
/*
- * if we broke out of the loop in order to insert stuff because we hit
- * the maximum number of inserts at a time we can handle, then loop
- * back and pick up where we left off
+ * if restart is set for whatever reason we need to go back and start
+ * searching through the pending list again.
+ *
+ * We just inserted some extents, which could have resulted in new
+ * blocks being allocated, which would result in new blocks needing
+ * updates, so if all is set we _must_ restart to get the updated
+ * blocks.
*/
- if (num_inserts == max_inserts) {
- INIT_LIST_HEAD(&insert_list);
- INIT_LIST_HEAD(&update_list);
- num_inserts = 0;
- goto again;
- }
-
- /*
- * again, if we need to make absolutely sure there are no more pending
- * extent operations left and we know that we skipped some, go back to
- * the beginning and do it all again
- */
- if (all && skipped) {
+ if (restart || all) {
INIT_LIST_HEAD(&insert_list);
INIT_LIST_HEAD(&update_list);
search = 0;
- skipped = 0;
+ restart = 0;
num_inserts = 0;
goto again;
}
@@ -2709,6 +2720,8 @@
goto again;
}
+ if (!err)
+ finish_current_insert(trans, extent_root, 0);
return err;
}
@@ -2859,7 +2872,8 @@
if (data & BTRFS_BLOCK_GROUP_METADATA) {
last_ptr = &root->fs_info->last_alloc;
- empty_cluster = 64 * 1024;
+ if (!btrfs_test_opt(root, SSD))
+ empty_cluster = 64 * 1024;
}
if ((data & BTRFS_BLOCK_GROUP_DATA) && btrfs_test_opt(root, SSD))
@@ -3402,7 +3416,8 @@
struct extent_buffer *btrfs_init_new_buffer(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
- u64 bytenr, u32 blocksize)
+ u64 bytenr, u32 blocksize,
+ int level)
{
struct extent_buffer *buf;
@@ -3410,6 +3425,7 @@
if (!buf)
return ERR_PTR(-ENOMEM);
btrfs_set_header_generation(buf, trans->transid);
+ btrfs_set_buffer_lockdep_class(buf, level);
btrfs_tree_lock(buf);
clean_tree_block(trans, root, buf);
@@ -3453,7 +3469,8 @@
return ERR_PTR(ret);
}
- buf = btrfs_init_new_buffer(trans, root, ins.objectid, blocksize);
+ buf = btrfs_init_new_buffer(trans, root, ins.objectid,
+ blocksize, level);
return buf;
}
@@ -5641,7 +5658,9 @@
prev_block = block_start;
}
+ mutex_lock(&extent_root->fs_info->trans_mutex);
btrfs_record_root_in_trans(found_root);
+ mutex_unlock(&extent_root->fs_info->trans_mutex);
if (ref_path->owner_objectid >= BTRFS_FIRST_FREE_OBJECTID) {
/*
* try to update data extent references while
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 37d43b5..ebe6b29 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -415,8 +415,6 @@
node = tree_insert(&tree->state, prealloc->end, &prealloc->rb_node);
if (node) {
- struct extent_state *found;
- found = rb_entry(node, struct extent_state, rb_node);
free_extent_state(prealloc);
return -EEXIST;
}
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 3e8023e..872f104 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1222,7 +1222,7 @@
/*
* ok we haven't committed the transaction yet, lets do a commit
*/
- if (file->private_data)
+ if (file && file->private_data)
btrfs_ioctl_trans_end(file);
trans = btrfs_start_transaction(root, 1);
@@ -1231,7 +1231,7 @@
goto out;
}
- ret = btrfs_log_dentry_safe(trans, root, file->f_dentry);
+ ret = btrfs_log_dentry_safe(trans, root, dentry);
if (ret < 0)
goto out;
@@ -1245,7 +1245,7 @@
* file again, but that will end up using the synchronization
* inside btrfs_sync_log to keep things safe.
*/
- mutex_unlock(&file->f_dentry->d_inode->i_mutex);
+ mutex_unlock(&dentry->d_inode->i_mutex);
if (ret > 0) {
ret = btrfs_commit_transaction(trans, root);
@@ -1253,7 +1253,7 @@
btrfs_sync_log(trans, root);
ret = btrfs_end_transaction(trans, root);
}
- mutex_lock(&file->f_dentry->d_inode->i_mutex);
+ mutex_lock(&dentry->d_inode->i_mutex);
out:
return ret > 0 ? EIO : ret;
}
diff --git a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c
index 2aa7987..cc7334d 100644
--- a/fs/btrfs/inode-map.c
+++ b/fs/btrfs/inode-map.c
@@ -84,7 +84,6 @@
search_key.type = 0;
search_key.offset = 0;
- btrfs_init_path(path);
start_found = 0;
ret = btrfs_search_slot(trans, root, &search_key, path, 0, 0);
if (ret < 0)
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 8f07062..3cee77a 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2531,8 +2531,6 @@
key.offset = (u64)-1;
key.type = (u8)-1;
- btrfs_init_path(path);
-
search_again:
ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
if (ret < 0)
@@ -4263,7 +4261,7 @@
{
if (PageWriteback(page) || PageDirty(page))
return 0;
- return __btrfs_releasepage(page, gfp_flags);
+ return __btrfs_releasepage(page, gfp_flags & GFP_NOFS);
}
static void btrfs_invalidatepage(struct page *page, unsigned long offset)
diff --git a/fs/btrfs/locking.c b/fs/btrfs/locking.c
index 9ebe938..85506c4 100644
--- a/fs/btrfs/locking.c
+++ b/fs/btrfs/locking.c
@@ -25,21 +25,10 @@
#include "extent_io.h"
#include "locking.h"
-/*
- * btrfs_header_level() isn't free, so don't call it when lockdep isn't
- * on
- */
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-static inline void spin_nested(struct extent_buffer *eb)
-{
- spin_lock_nested(&eb->lock, BTRFS_MAX_LEVEL - btrfs_header_level(eb));
-}
-#else
static inline void spin_nested(struct extent_buffer *eb)
{
spin_lock(&eb->lock);
}
-#endif
/*
* Setting a lock to blocking will drop the spinlock and set the
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index f3fd7e2..19a4daf 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -379,7 +379,6 @@
btrfs_start_delalloc_inodes(root);
btrfs_wait_ordered_extents(root, 0);
- btrfs_clean_old_snapshots(root);
trans = btrfs_start_transaction(root, 1);
ret = btrfs_commit_transaction(trans, root);
sb->s_dirt = 0;
@@ -511,6 +510,10 @@
struct btrfs_root *root = btrfs_sb(sb);
int ret;
+ ret = btrfs_parse_options(root, data);
+ if (ret)
+ return -EINVAL;
+
if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY))
return 0;
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 919172de..4112d53 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -688,7 +688,9 @@
num_bytes -= btrfs_root_used(&dirty->root->root_item);
bytes_used = btrfs_root_used(&root->root_item);
if (num_bytes) {
+ mutex_lock(&root->fs_info->trans_mutex);
btrfs_record_root_in_trans(root);
+ mutex_unlock(&root->fs_info->trans_mutex);
btrfs_set_root_used(&root->root_item,
bytes_used - num_bytes);
}
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 2079429..9c462fb 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2832,7 +2832,9 @@
BUG_ON(!wc.replay_dest);
wc.replay_dest->log_root = log;
+ mutex_lock(&fs_info->trans_mutex);
btrfs_record_root_in_trans(wc.replay_dest);
+ mutex_unlock(&fs_info->trans_mutex);
ret = walk_log_tree(trans, log, &wc);
BUG_ON(ret);
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index bcd14eb..1316139 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -2894,10 +2894,6 @@
free_extent_map(em);
}
- map = kzalloc(sizeof(*map), GFP_NOFS);
- if (!map)
- return -ENOMEM;
-
em = alloc_extent_map(GFP_NOFS);
if (!em)
return -ENOMEM;
@@ -3106,6 +3102,8 @@
if (!sb)
return -ENOMEM;
btrfs_set_buffer_uptodate(sb);
+ btrfs_set_buffer_lockdep_class(sb, 0);
+
write_extent_buffer(sb, super_copy, 0, BTRFS_SUPER_INFO_SIZE);
array_size = btrfs_super_sys_array_size(super_copy);
diff --git a/fs/buffer.c b/fs/buffer.c
index 665d446..9f69741 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -777,6 +777,7 @@
__inc_zone_page_state(page, NR_FILE_DIRTY);
__inc_bdi_stat(mapping->backing_dev_info,
BDI_RECLAIMABLE);
+ task_dirty_inc(current);
task_io_account_write(PAGE_CACHE_SIZE);
}
radix_tree_tag_set(&mapping->page_tree,
@@ -3108,7 +3109,7 @@
if (test_clear_buffer_dirty(bh)) {
get_bh(bh);
bh->b_end_io = end_buffer_write_sync;
- ret = submit_bh(WRITE_SYNC, bh);
+ ret = submit_bh(WRITE, bh);
wait_on_buffer(bh);
if (buffer_eopnotsupp(bh)) {
clear_buffer_eopnotsupp(bh);
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 73ac7eb..851388f 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,3 +1,13 @@
+Version 1.57
+------------
+Improve support for multiple security contexts to the same server. We
+used to use the same "vcnumber" for all connections which could cause
+the server to treat subsequent connections, especially those that
+are authenticated as guest, as reconnections, invalidating the earlier
+user's smb session. This fix allows cifs to mount multiple times to the
+same server with different userids without risking invalidating earlier
+established security contexts.
+
Version 1.56
------------
Add "forcemandatorylock" mount option to allow user to use mandatory
@@ -7,7 +17,10 @@
top of the share. Fix problem in 2.6.28 resolving DFS paths to
Samba servers (worked to Windows). Fix rmdir so that pending search
(readdir) requests do not get invalid results which include the now
-removed directory.
+removed directory. Fix oops in cifs_dfs_ref.c when prefixpath is not reachable
+when using DFS. Add better file create support to servers which support
+the CIFS POSIX protocol extensions (this adds support for new flags
+on create, and improves semantics for write of locked ranges).
Version 1.55
------------
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 7ac4818..2b1d28a 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -100,5 +100,5 @@
extern const struct export_operations cifs_export_ops;
#endif /* EXPERIMENTAL */
-#define CIFS_VERSION "1.56"
+#define CIFS_VERSION "1.57"
#endif /* _CIFSFS_H */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 94c1ca0..e004f6d 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -164,9 +164,12 @@
/* multiplexed reads or writes */
unsigned int maxBuf; /* maxBuf specifies the maximum */
/* message size the server can send or receive for non-raw SMBs */
- unsigned int maxRw; /* maxRw specifies the maximum */
+ unsigned int max_rw; /* maxRw specifies the maximum */
/* message size the server can send or receive for */
/* SMB_COM_WRITE_RAW or SMB_COM_READ_RAW. */
+ unsigned int max_vcs; /* maximum number of smb sessions, at least
+ those that can be specified uniquely with
+ vcnumbers */
char sessid[4]; /* unique token id for this session */
/* (returned on Negotiate */
int capabilities; /* allow selective disabling of caps by smb sess */
@@ -210,6 +213,7 @@
unsigned overrideSecFlg; /* if non-zero override global sec flags */
__u16 ipc_tid; /* special tid for connection to IPC share */
__u16 flags;
+ __u16 vcnum;
char *serverOS; /* name of operating system underlying server */
char *serverNOS; /* name of network operating system of server */
char *serverDomain; /* security realm of server */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 382ba62..083dfc5 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -42,6 +42,7 @@
#define GetXid() (int)_GetXid(); cFYI(1,("CIFS VFS: in %s as Xid: %d with uid: %d",__func__, xid,current_fsuid()));
#define FreeXid(curr_xid) {_FreeXid(curr_xid); cFYI(1,("CIFS VFS: leaving %s (xid = %d) rc = %d",__func__,curr_xid,(int)rc));}
extern char *build_path_from_dentry(struct dentry *);
+extern char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb);
extern char *build_wildcard_path_from_dentry(struct dentry *direntry);
/* extern void renew_parental_timestamps(struct dentry *direntry);*/
extern int SendReceive(const unsigned int /* xid */ , struct cifsSesInfo *,
@@ -91,6 +92,9 @@
extern __le64 cnvrtDosCifsTm(__u16 date, __u16 time);
extern struct timespec cnvrtDosUnixTm(__u16 date, __u16 time);
+extern void posix_fill_in_inode(struct inode *tmp_inode,
+ FILE_UNIX_BASIC_INFO *pData, int isNewInode);
+extern struct inode *cifs_new_inode(struct super_block *sb, __u64 *inum);
extern int cifs_get_inode_info(struct inode **pinode,
const unsigned char *search_path,
FILE_ALL_INFO *pfile_info,
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 552642a..939e2f7 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -528,14 +528,15 @@
server->maxReq = le16_to_cpu(rsp->MaxMpxCount);
server->maxBuf = min((__u32)le16_to_cpu(rsp->MaxBufSize),
(__u32)CIFSMaxBufSize + MAX_CIFS_HDR_SIZE);
+ server->max_vcs = le16_to_cpu(rsp->MaxNumberVcs);
GETU32(server->sessid) = le32_to_cpu(rsp->SessionKey);
/* even though we do not use raw we might as well set this
accurately, in case we ever find a need for it */
if ((le16_to_cpu(rsp->RawMode) & RAW_ENABLE) == RAW_ENABLE) {
- server->maxRw = 0xFF00;
+ server->max_rw = 0xFF00;
server->capabilities = CAP_MPX_MODE | CAP_RAW_MODE;
} else {
- server->maxRw = 0;/* we do not need to use raw anyway */
+ server->max_rw = 0;/* do not need to use raw anyway */
server->capabilities = CAP_MPX_MODE;
}
tmp = (__s16)le16_to_cpu(rsp->ServerTimeZone);
@@ -638,7 +639,7 @@
/* probably no need to store and check maxvcs */
server->maxBuf = min(le32_to_cpu(pSMBr->MaxBufferSize),
(__u32) CIFSMaxBufSize + MAX_CIFS_HDR_SIZE);
- server->maxRw = le32_to_cpu(pSMBr->MaxRawSize);
+ server->max_rw = le32_to_cpu(pSMBr->MaxRawSize);
cFYI(DBG2, ("Max buf = %d", ses->server->maxBuf));
GETU32(ses->server->sessid) = le32_to_cpu(pSMBr->SessionKey);
server->capabilities = le32_to_cpu(pSMBr->Capabilities);
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 2209be9..da0f4ff 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -23,7 +23,6 @@
#include <linux/string.h>
#include <linux/list.h>
#include <linux/wait.h>
-#include <linux/ipv6.h>
#include <linux/pagemap.h>
#include <linux/ctype.h>
#include <linux/utsname.h>
@@ -35,6 +34,7 @@
#include <linux/freezer.h>
#include <asm/uaccess.h>
#include <asm/processor.h>
+#include <net/ipv6.h>
#include "cifspdu.h"
#include "cifsglob.h"
#include "cifsproto.h"
@@ -1379,8 +1379,8 @@
server->addr.sockAddr.sin_addr.s_addr))
continue;
else if (addr->ss_family == AF_INET6 &&
- memcmp(&server->addr.sockAddr6.sin6_addr,
- &addr6->sin6_addr, sizeof(addr6->sin6_addr)))
+ !ipv6_addr_equal(&server->addr.sockAddr6.sin6_addr,
+ &addr6->sin6_addr))
continue;
++server->srv_count;
@@ -2180,6 +2180,33 @@
"mount option supported"));
}
+static int
+is_path_accessible(int xid, struct cifsTconInfo *tcon,
+ struct cifs_sb_info *cifs_sb, const char *full_path)
+{
+ int rc;
+ __u64 inode_num;
+ FILE_ALL_INFO *pfile_info;
+
+ rc = CIFSGetSrvInodeNumber(xid, tcon, full_path, &inode_num,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (rc != -EOPNOTSUPP)
+ return rc;
+
+ pfile_info = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL);
+ if (pfile_info == NULL)
+ return -ENOMEM;
+
+ rc = CIFSSMBQPathInfo(xid, tcon, full_path, pfile_info,
+ 0 /* not legacy */, cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
+ kfree(pfile_info);
+ return rc;
+}
+
int
cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
char *mount_data, const char *devname)
@@ -2190,6 +2217,7 @@
struct cifsSesInfo *pSesInfo = NULL;
struct cifsTconInfo *tcon = NULL;
struct TCP_Server_Info *srvTcp = NULL;
+ char *full_path;
xid = GetXid();
@@ -2426,6 +2454,23 @@
cifs_sb->rsize = min(cifs_sb->rsize,
(tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE));
+ if (!rc && cifs_sb->prepathlen) {
+ /* build_path_to_root works only when we have a valid tcon */
+ full_path = cifs_build_path_to_root(cifs_sb);
+ if (full_path == NULL) {
+ rc = -ENOMEM;
+ goto mount_fail_check;
+ }
+ rc = is_path_accessible(xid, tcon, cifs_sb, full_path);
+ if (rc) {
+ cERROR(1, ("Path %s in not accessible: %d",
+ full_path, rc));
+ kfree(full_path);
+ goto mount_fail_check;
+ }
+ kfree(full_path);
+ }
+
/* volume_info->password is freed above when existing session found
(in which case it is not needed anymore) but when new sesion is created
the password ptr is put in the new session structure (in which case the
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 964aad0..89fb728 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -3,7 +3,7 @@
*
* vfs operations that deal with dentries
*
- * Copyright (C) International Business Machines Corp., 2002,2008
+ * Copyright (C) International Business Machines Corp., 2002,2009
* Author(s): Steve French (sfrench@us.ibm.com)
*
* This library is free software; you can redistribute it and/or modify
@@ -129,6 +129,78 @@
return full_path;
}
+static int cifs_posix_open(char *full_path, struct inode **pinode,
+ struct super_block *sb, int mode, int oflags,
+ int *poplock, __u16 *pnetfid, int xid)
+{
+ int rc;
+ __u32 oplock;
+ FILE_UNIX_BASIC_INFO *presp_data;
+ __u32 posix_flags = 0;
+ struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
+
+ cFYI(1, ("posix open %s", full_path));
+
+ presp_data = kzalloc(sizeof(FILE_UNIX_BASIC_INFO), GFP_KERNEL);
+ if (presp_data == NULL)
+ return -ENOMEM;
+
+/* So far cifs posix extensions can only map the following flags.
+ There are other valid fmode oflags such as FMODE_LSEEK, FMODE_PREAD, but
+ so far we do not seem to need them, and we can treat them as local only */
+ if ((oflags & (FMODE_READ | FMODE_WRITE)) ==
+ (FMODE_READ | FMODE_WRITE))
+ posix_flags = SMB_O_RDWR;
+ else if (oflags & FMODE_READ)
+ posix_flags = SMB_O_RDONLY;
+ else if (oflags & FMODE_WRITE)
+ posix_flags = SMB_O_WRONLY;
+ if (oflags & O_CREAT)
+ posix_flags |= SMB_O_CREAT;
+ if (oflags & O_EXCL)
+ posix_flags |= SMB_O_EXCL;
+ if (oflags & O_TRUNC)
+ posix_flags |= SMB_O_TRUNC;
+ if (oflags & O_APPEND)
+ posix_flags |= SMB_O_APPEND;
+ if (oflags & O_SYNC)
+ posix_flags |= SMB_O_SYNC;
+ if (oflags & O_DIRECTORY)
+ posix_flags |= SMB_O_DIRECTORY;
+ if (oflags & O_NOFOLLOW)
+ posix_flags |= SMB_O_NOFOLLOW;
+ if (oflags & O_DIRECT)
+ posix_flags |= SMB_O_DIRECT;
+
+
+ rc = CIFSPOSIXCreate(xid, cifs_sb->tcon, posix_flags, mode,
+ pnetfid, presp_data, &oplock, full_path,
+ cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (rc)
+ goto posix_open_ret;
+
+ if (presp_data->Type == cpu_to_le32(-1))
+ goto posix_open_ret; /* open ok, caller does qpathinfo */
+
+ /* get new inode and set it up */
+ if (!pinode)
+ goto posix_open_ret; /* caller does not need info */
+
+ *pinode = cifs_new_inode(sb, &presp_data->UniqueId);
+
+ /* We do not need to close the file if new_inode fails since
+ the caller will retry qpathinfo as long as inode is null */
+ if (*pinode == NULL)
+ goto posix_open_ret;
+
+ posix_fill_in_inode(*pinode, presp_data, 1);
+
+posix_open_ret:
+ kfree(presp_data);
+ return rc;
+}
+
static void setup_cifs_dentry(struct cifsTconInfo *tcon,
struct dentry *direntry,
struct inode *newinode)
@@ -150,7 +222,14 @@
int xid;
int create_options = CREATE_NOT_DIR;
int oplock = 0;
- /* BB below access is too much for the mknod to request */
+ int oflags;
+ /*
+ * BB below access is probably too much for mknod to request
+ * but we have to do query and setpathinfo so requesting
+ * less could fail (unless we want to request getatr and setatr
+ * permissions (only). At least for POSIX we do not have to
+ * request so much.
+ */
int desiredAccess = GENERIC_READ | GENERIC_WRITE;
__u16 fileHandle;
struct cifs_sb_info *cifs_sb;
@@ -174,13 +253,43 @@
}
mode &= ~current->fs->umask;
+ if (oplockEnabled)
+ oplock = REQ_OPLOCK;
+
+ if (nd && (nd->flags & LOOKUP_OPEN))
+ oflags = nd->intent.open.flags;
+ else
+ oflags = FMODE_READ;
+
+ if (tcon->unix_ext && (tcon->ses->capabilities & CAP_UNIX) &&
+ (CIFS_UNIX_POSIX_PATH_OPS_CAP &
+ le64_to_cpu(tcon->fsUnixInfo.Capability))) {
+ rc = cifs_posix_open(full_path, &newinode, inode->i_sb,
+ mode, oflags, &oplock, &fileHandle, xid);
+ /* EIO could indicate that (posix open) operation is not
+ supported, despite what server claimed in capability
+ negotation. EREMOTE indicates DFS junction, which is not
+ handled in posix open */
+
+ if ((rc == 0) && (newinode == NULL))
+ goto cifs_create_get_file_info; /* query inode info */
+ else if (rc == 0) /* success, no need to query */
+ goto cifs_create_set_dentry;
+ else if ((rc != -EIO) && (rc != -EREMOTE) &&
+ (rc != -EOPNOTSUPP)) /* path not found or net err */
+ goto cifs_create_out;
+ /* else fallthrough to retry, using older open call, this is
+ case where server does not support this SMB level, and
+ falsely claims capability (also get here for DFS case
+ which should be rare for path not covered on files) */
+ }
if (nd && (nd->flags & LOOKUP_OPEN)) {
- int oflags = nd->intent.open.flags;
-
+ /* if the file is going to stay open, then we
+ need to set the desired access properly */
desiredAccess = 0;
if (oflags & FMODE_READ)
- desiredAccess |= GENERIC_READ;
+ desiredAccess |= GENERIC_READ; /* is this too little? */
if (oflags & FMODE_WRITE) {
desiredAccess |= GENERIC_WRITE;
if (!(oflags & FMODE_READ))
@@ -199,8 +308,6 @@
/* BB add processing to set equivalent of mode - e.g. via CreateX with
ACLs */
- if (oplockEnabled)
- oplock = REQ_OPLOCK;
buf = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL);
if (buf == NULL) {
@@ -233,116 +340,112 @@
}
if (rc) {
cFYI(1, ("cifs_create returned 0x%x", rc));
- } else {
- /* If Open reported that we actually created a file
- then we now have to set the mode if possible */
- if ((tcon->unix_ext) && (oplock & CIFS_CREATE_ACTION)) {
- struct cifs_unix_set_info_args args = {
+ goto cifs_create_out;
+ }
+
+ /* If Open reported that we actually created a file
+ then we now have to set the mode if possible */
+ if ((tcon->unix_ext) && (oplock & CIFS_CREATE_ACTION)) {
+ struct cifs_unix_set_info_args args = {
.mode = mode,
.ctime = NO_CHANGE_64,
.atime = NO_CHANGE_64,
.mtime = NO_CHANGE_64,
.device = 0,
- };
+ };
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
- args.uid = (__u64) current_fsuid();
- if (inode->i_mode & S_ISGID)
- args.gid = (__u64) inode->i_gid;
- else
- args.gid = (__u64) current_fsgid();
- } else {
- args.uid = NO_CHANGE_64;
- args.gid = NO_CHANGE_64;
- }
- CIFSSMBUnixSetInfo(xid, tcon, full_path, &args,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
+ args.uid = (__u64) current_fsuid();
+ if (inode->i_mode & S_ISGID)
+ args.gid = (__u64) inode->i_gid;
+ else
+ args.gid = (__u64) current_fsgid();
} else {
- /* BB implement mode setting via Windows security
- descriptors e.g. */
- /* CIFSSMBWinSetPerms(xid,tcon,path,mode,-1,-1,nls);*/
-
- /* Could set r/o dos attribute if mode & 0222 == 0 */
+ args.uid = NO_CHANGE_64;
+ args.gid = NO_CHANGE_64;
}
+ CIFSSMBUnixSetInfo(xid, tcon, full_path, &args,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+ } else {
+ /* BB implement mode setting via Windows security
+ descriptors e.g. */
+ /* CIFSSMBWinSetPerms(xid,tcon,path,mode,-1,-1,nls);*/
- /* server might mask mode so we have to query for it */
- if (tcon->unix_ext)
- rc = cifs_get_inode_info_unix(&newinode, full_path,
- inode->i_sb, xid);
- else {
- rc = cifs_get_inode_info(&newinode, full_path,
- buf, inode->i_sb, xid,
- &fileHandle);
- if (newinode) {
- if (cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_DYNPERM)
- newinode->i_mode = mode;
- if ((oplock & CIFS_CREATE_ACTION) &&
- (cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_SET_UID)) {
- newinode->i_uid = current_fsuid();
- if (inode->i_mode & S_ISGID)
- newinode->i_gid =
- inode->i_gid;
- else
- newinode->i_gid =
- current_fsgid();
- }
+ /* Could set r/o dos attribute if mode & 0222 == 0 */
+ }
+
+cifs_create_get_file_info:
+ /* server might mask mode so we have to query for it */
+ if (tcon->unix_ext)
+ rc = cifs_get_inode_info_unix(&newinode, full_path,
+ inode->i_sb, xid);
+ else {
+ rc = cifs_get_inode_info(&newinode, full_path, buf,
+ inode->i_sb, xid, &fileHandle);
+ if (newinode) {
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)
+ newinode->i_mode = mode;
+ if ((oplock & CIFS_CREATE_ACTION) &&
+ (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) {
+ newinode->i_uid = current_fsuid();
+ if (inode->i_mode & S_ISGID)
+ newinode->i_gid = inode->i_gid;
+ else
+ newinode->i_gid = current_fsgid();
}
}
+ }
- if (rc != 0) {
- cFYI(1, ("Create worked, get_inode_info failed rc = %d",
- rc));
- } else
- setup_cifs_dentry(tcon, direntry, newinode);
+cifs_create_set_dentry:
+ if (rc == 0)
+ setup_cifs_dentry(tcon, direntry, newinode);
+ else
+ cFYI(1, ("Create worked, get_inode_info failed rc = %d", rc));
- if ((nd == NULL /* nfsd case - nfs srv does not set nd */) ||
- (!(nd->flags & LOOKUP_OPEN))) {
- /* mknod case - do not leave file open */
- CIFSSMBClose(xid, tcon, fileHandle);
- } else if (newinode) {
- struct cifsFileInfo *pCifsFile =
- kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
+ /* nfsd case - nfs srv does not set nd */
+ if ((nd == NULL) || (!(nd->flags & LOOKUP_OPEN))) {
+ /* mknod case - do not leave file open */
+ CIFSSMBClose(xid, tcon, fileHandle);
+ } else if (newinode) {
+ struct cifsFileInfo *pCifsFile =
+ kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
- if (pCifsFile == NULL)
- goto cifs_create_out;
- pCifsFile->netfid = fileHandle;
- pCifsFile->pid = current->tgid;
- pCifsFile->pInode = newinode;
- pCifsFile->invalidHandle = false;
- pCifsFile->closePend = false;
- init_MUTEX(&pCifsFile->fh_sem);
- mutex_init(&pCifsFile->lock_mutex);
- INIT_LIST_HEAD(&pCifsFile->llist);
- atomic_set(&pCifsFile->wrtPending, 0);
+ if (pCifsFile == NULL)
+ goto cifs_create_out;
+ pCifsFile->netfid = fileHandle;
+ pCifsFile->pid = current->tgid;
+ pCifsFile->pInode = newinode;
+ pCifsFile->invalidHandle = false;
+ pCifsFile->closePend = false;
+ init_MUTEX(&pCifsFile->fh_sem);
+ mutex_init(&pCifsFile->lock_mutex);
+ INIT_LIST_HEAD(&pCifsFile->llist);
+ atomic_set(&pCifsFile->wrtPending, 0);
- /* set the following in open now
+ /* set the following in open now
pCifsFile->pfile = file; */
- write_lock(&GlobalSMBSeslock);
- list_add(&pCifsFile->tlist, &tcon->openFileList);
- pCifsInode = CIFS_I(newinode);
- if (pCifsInode) {
- /* if readable file instance put first in list*/
- if (write_only) {
- list_add_tail(&pCifsFile->flist,
- &pCifsInode->openFileList);
- } else {
- list_add(&pCifsFile->flist,
- &pCifsInode->openFileList);
- }
- if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
- pCifsInode->clientCanCacheAll = true;
- pCifsInode->clientCanCacheRead = true;
- cFYI(1, ("Exclusive Oplock inode %p",
- newinode));
- } else if ((oplock & 0xF) == OPLOCK_READ)
- pCifsInode->clientCanCacheRead = true;
+ write_lock(&GlobalSMBSeslock);
+ list_add(&pCifsFile->tlist, &tcon->openFileList);
+ pCifsInode = CIFS_I(newinode);
+ if (pCifsInode) {
+ /* if readable file instance put first in list*/
+ if (write_only) {
+ list_add_tail(&pCifsFile->flist,
+ &pCifsInode->openFileList);
+ } else {
+ list_add(&pCifsFile->flist,
+ &pCifsInode->openFileList);
}
- write_unlock(&GlobalSMBSeslock);
+ if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
+ pCifsInode->clientCanCacheAll = true;
+ pCifsInode->clientCanCacheRead = true;
+ cFYI(1, ("Exclusive Oplock inode %p",
+ newinode));
+ } else if ((oplock & 0xF) == OPLOCK_READ)
+ pCifsInode->clientCanCacheRead = true;
}
+ write_unlock(&GlobalSMBSeslock);
}
cifs_create_out:
kfree(buf);
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index bcf7b51..4690a36 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -199,6 +199,49 @@
pfnd_dat->Gid = cpu_to_le64(pinode->i_gid);
}
+/**
+ * cifs_new inode - create new inode, initialize, and hash it
+ * @sb - pointer to superblock
+ * @inum - if valid pointer and serverino is enabled, replace i_ino with val
+ *
+ * Create a new inode, initialize it for CIFS and hash it. Returns the new
+ * inode or NULL if one couldn't be allocated.
+ *
+ * If the share isn't mounted with "serverino" or inum is a NULL pointer then
+ * we'll just use the inode number assigned by new_inode(). Note that this can
+ * mean i_ino collisions since the i_ino assigned by new_inode is not
+ * guaranteed to be unique.
+ */
+struct inode *
+cifs_new_inode(struct super_block *sb, __u64 *inum)
+{
+ struct inode *inode;
+
+ inode = new_inode(sb);
+ if (inode == NULL)
+ return NULL;
+
+ /*
+ * BB: Is i_ino == 0 legal? Here, we assume that it is. If it isn't we
+ * stop passing inum as ptr. Are there sanity checks we can use to
+ * ensure that the server is really filling in that field? Also,
+ * if serverino is disabled, perhaps we should be using iunique()?
+ */
+ if (inum && (CIFS_SB(sb)->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM))
+ inode->i_ino = (unsigned long) *inum;
+
+ /*
+ * must set this here instead of cifs_alloc_inode since VFS will
+ * clobber i_flags
+ */
+ if (sb->s_flags & MS_NOATIME)
+ inode->i_flags |= S_NOATIME | S_NOCMTIME;
+
+ insert_inode_hash(inode);
+
+ return inode;
+}
+
int cifs_get_inode_info_unix(struct inode **pinode,
const unsigned char *full_path, struct super_block *sb, int xid)
{
@@ -233,22 +276,11 @@
/* get new inode */
if (*pinode == NULL) {
- *pinode = new_inode(sb);
+ *pinode = cifs_new_inode(sb, &find_data.UniqueId);
if (*pinode == NULL) {
rc = -ENOMEM;
goto cgiiu_exit;
}
- /* Is an i_ino of zero legal? */
- /* note ino incremented to unique num in new_inode */
- /* Are there sanity checks we can use to ensure that
- the server is really filling in that field? */
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
- (*pinode)->i_ino = (unsigned long)find_data.UniqueId;
-
- if (sb->s_flags & MS_NOATIME)
- (*pinode)->i_flags |= S_NOATIME | S_NOCMTIME;
-
- insert_inode_hash(*pinode);
}
inode = *pinode;
@@ -465,11 +497,9 @@
/* get new inode */
if (*pinode == NULL) {
- *pinode = new_inode(sb);
- if (*pinode == NULL) {
- rc = -ENOMEM;
- goto cgii_exit;
- }
+ __u64 inode_num;
+ __u64 *pinum = &inode_num;
+
/* Is an i_ino of zero legal? Can we use that to check
if the server supports returning inode numbers? Are
there other sanity checks we can use to ensure that
@@ -486,22 +516,26 @@
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
int rc1 = 0;
- __u64 inode_num;
rc1 = CIFSGetSrvInodeNumber(xid, pTcon,
- full_path, &inode_num,
+ full_path, pinum,
cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc1) {
cFYI(1, ("GetSrvInodeNum rc %d", rc1));
+ pinum = NULL;
/* BB EOPNOSUPP disable SERVER_INUM? */
- } else /* do we need cast or hash to ino? */
- (*pinode)->i_ino = inode_num;
- } /* else ino incremented to unique num in new_inode*/
- if (sb->s_flags & MS_NOATIME)
- (*pinode)->i_flags |= S_NOATIME | S_NOCMTIME;
- insert_inode_hash(*pinode);
+ }
+ } else {
+ pinum = NULL;
+ }
+
+ *pinode = cifs_new_inode(sb, pinum);
+ if (*pinode == NULL) {
+ rc = -ENOMEM;
+ goto cgii_exit;
+ }
}
inode = *pinode;
cifsInfo = CIFS_I(inode);
@@ -621,7 +655,7 @@
.lookup = cifs_lookup,
};
-static char *build_path_to_root(struct cifs_sb_info *cifs_sb)
+char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb)
{
int pplen = cifs_sb->prepathlen;
int dfsplen;
@@ -678,7 +712,7 @@
return inode;
cifs_sb = CIFS_SB(inode->i_sb);
- full_path = build_path_to_root(cifs_sb);
+ full_path = cifs_build_path_to_root(cifs_sb);
if (full_path == NULL)
return ERR_PTR(-ENOMEM);
@@ -1017,7 +1051,7 @@
return rc;
}
-static void posix_fill_in_inode(struct inode *tmp_inode,
+void posix_fill_in_inode(struct inode *tmp_inode,
FILE_UNIX_BASIC_INFO *pData, int isNewInode)
{
struct cifsInodeInfo *cifsInfo = CIFS_I(tmp_inode);
@@ -1114,24 +1148,14 @@
else
direntry->d_op = &cifs_dentry_ops;
- newinode = new_inode(inode->i_sb);
+ newinode = cifs_new_inode(inode->i_sb,
+ &pInfo->UniqueId);
if (newinode == NULL) {
kfree(pInfo);
goto mkdir_get_info;
}
- /* Is an i_ino of zero legal? */
- /* Are there sanity checks we can use to ensure that
- the server is really filling in that field? */
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
- newinode->i_ino =
- (unsigned long)pInfo->UniqueId;
- } /* note ino incremented to unique num in new_inode */
- if (inode->i_sb->s_flags & MS_NOATIME)
- newinode->i_flags |= S_NOATIME | S_NOCMTIME;
newinode->i_nlink = 2;
-
- insert_inode_hash(newinode);
d_instantiate(direntry, newinode);
/* we already checked in POSIXCreate whether
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 9f51f9b..c2c01ff 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -56,35 +56,34 @@
}
#endif /* DEBUG2 */
-/* Returns one if new inode created (which therefore needs to be hashed) */
+/* Returns 1 if new inode created, 2 if both dentry and inode were */
/* Might check in the future if inode number changed so we can rehash inode */
-static int construct_dentry(struct qstr *qstring, struct file *file,
- struct inode **ptmp_inode, struct dentry **pnew_dentry)
+static int
+construct_dentry(struct qstr *qstring, struct file *file,
+ struct inode **ptmp_inode, struct dentry **pnew_dentry,
+ __u64 *inum)
{
- struct dentry *tmp_dentry;
- struct cifs_sb_info *cifs_sb;
- struct cifsTconInfo *pTcon;
+ struct dentry *tmp_dentry = NULL;
+ struct super_block *sb = file->f_path.dentry->d_sb;
int rc = 0;
cFYI(1, ("For %s", qstring->name));
- cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
- pTcon = cifs_sb->tcon;
qstring->hash = full_name_hash(qstring->name, qstring->len);
tmp_dentry = d_lookup(file->f_path.dentry, qstring);
if (tmp_dentry) {
+ /* BB: overwrite old name? i.e. tmp_dentry->d_name and
+ * tmp_dentry->d_name.len??
+ */
cFYI(0, ("existing dentry with inode 0x%p",
tmp_dentry->d_inode));
*ptmp_inode = tmp_dentry->d_inode;
-/* BB overwrite old name? i.e. tmp_dentry->d_name and tmp_dentry->d_name.len??*/
if (*ptmp_inode == NULL) {
- *ptmp_inode = new_inode(file->f_path.dentry->d_sb);
+ *ptmp_inode = cifs_new_inode(sb, inum);
if (*ptmp_inode == NULL)
return rc;
rc = 1;
}
- if (file->f_path.dentry->d_sb->s_flags & MS_NOATIME)
- (*ptmp_inode)->i_flags |= S_NOATIME | S_NOCMTIME;
} else {
tmp_dentry = d_alloc(file->f_path.dentry, qstring);
if (tmp_dentry == NULL) {
@@ -93,15 +92,14 @@
return rc;
}
- *ptmp_inode = new_inode(file->f_path.dentry->d_sb);
- if (pTcon->nocase)
+ if (CIFS_SB(sb)->tcon->nocase)
tmp_dentry->d_op = &cifs_ci_dentry_ops;
else
tmp_dentry->d_op = &cifs_dentry_ops;
+
+ *ptmp_inode = cifs_new_inode(sb, inum);
if (*ptmp_inode == NULL)
return rc;
- if (file->f_path.dentry->d_sb->s_flags & MS_NOATIME)
- (*ptmp_inode)->i_flags |= S_NOATIME | S_NOCMTIME;
rc = 2;
}
@@ -822,7 +820,7 @@
/* inode num, inode type and filename returned */
static int cifs_get_name_from_search_buf(struct qstr *pqst,
char *current_entry, __u16 level, unsigned int unicode,
- struct cifs_sb_info *cifs_sb, int max_len, ino_t *pinum)
+ struct cifs_sb_info *cifs_sb, int max_len, __u64 *pinum)
{
int rc = 0;
unsigned int len = 0;
@@ -842,9 +840,7 @@
len = strnlen(filename, PATH_MAX);
}
- /* BB fixme - hash low and high 32 bits if not 64 bit arch BB */
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
- *pinum = pFindData->UniqueId;
+ *pinum = pFindData->UniqueId;
} else if (level == SMB_FIND_FILE_DIRECTORY_INFO) {
FILE_DIRECTORY_INFO *pFindData =
(FILE_DIRECTORY_INFO *)current_entry;
@@ -907,7 +903,7 @@
struct qstr qstring;
struct cifsFileInfo *pCifsF;
unsigned int obj_type;
- ino_t inum;
+ __u64 inum;
struct cifs_sb_info *cifs_sb;
struct inode *tmp_inode;
struct dentry *tmp_dentry;
@@ -940,20 +936,18 @@
if (rc)
return rc;
- rc = construct_dentry(&qstring, file, &tmp_inode, &tmp_dentry);
+ /* only these two infolevels return valid inode numbers */
+ if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_UNIX ||
+ pCifsF->srch_inf.info_level == SMB_FIND_FILE_ID_FULL_DIR_INFO)
+ rc = construct_dentry(&qstring, file, &tmp_inode, &tmp_dentry,
+ &inum);
+ else
+ rc = construct_dentry(&qstring, file, &tmp_inode, &tmp_dentry,
+ NULL);
+
if ((tmp_inode == NULL) || (tmp_dentry == NULL))
return -ENOMEM;
- if (rc) {
- /* inode created, we need to hash it with right inode number */
- if (inum != 0) {
- /* BB fixme - hash the 2 32 quantities bits together if
- * necessary BB */
- tmp_inode->i_ino = inum;
- }
- insert_inode_hash(tmp_inode);
- }
-
/* we pass in rc below, indicating whether it is a new inode,
so we can figure out whether to invalidate the inode cached
data if the file has changed */
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 5f22de7..5c68b42 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -34,15 +34,99 @@
extern void SMBNTencrypt(unsigned char *passwd, unsigned char *c8,
unsigned char *p24);
+/* Checks if this is the first smb session to be reconnected after
+ the socket has been reestablished (so we know whether to use vc 0).
+ Called while holding the cifs_tcp_ses_lock, so do not block */
+static bool is_first_ses_reconnect(struct cifsSesInfo *ses)
+{
+ struct list_head *tmp;
+ struct cifsSesInfo *tmp_ses;
+
+ list_for_each(tmp, &ses->server->smb_ses_list) {
+ tmp_ses = list_entry(tmp, struct cifsSesInfo,
+ smb_ses_list);
+ if (tmp_ses->need_reconnect == false)
+ return false;
+ }
+ /* could not find a session that was already connected,
+ this must be the first one we are reconnecting */
+ return true;
+}
+
+/*
+ * vc number 0 is treated specially by some servers, and should be the
+ * first one we request. After that we can use vcnumbers up to maxvcs,
+ * one for each smb session (some Windows versions set maxvcs incorrectly
+ * so maxvc=1 can be ignored). If we have too many vcs, we can reuse
+ * any vc but zero (some servers reset the connection on vcnum zero)
+ *
+ */
+static __le16 get_next_vcnum(struct cifsSesInfo *ses)
+{
+ __u16 vcnum = 0;
+ struct list_head *tmp;
+ struct cifsSesInfo *tmp_ses;
+ __u16 max_vcs = ses->server->max_vcs;
+ __u16 i;
+ int free_vc_found = 0;
+
+ /* Quoting the MS-SMB specification: "Windows-based SMB servers set this
+ field to one but do not enforce this limit, which allows an SMB client
+ to establish more virtual circuits than allowed by this value ... but
+ other server implementations can enforce this limit." */
+ if (max_vcs < 2)
+ max_vcs = 0xFFFF;
+
+ write_lock(&cifs_tcp_ses_lock);
+ if ((ses->need_reconnect) && is_first_ses_reconnect(ses))
+ goto get_vc_num_exit; /* vcnum will be zero */
+ for (i = ses->server->srv_count - 1; i < max_vcs; i++) {
+ if (i == 0) /* this is the only connection, use vc 0 */
+ break;
+
+ free_vc_found = 1;
+
+ list_for_each(tmp, &ses->server->smb_ses_list) {
+ tmp_ses = list_entry(tmp, struct cifsSesInfo,
+ smb_ses_list);
+ if (tmp_ses->vcnum == i) {
+ free_vc_found = 0;
+ break; /* found duplicate, try next vcnum */
+ }
+ }
+ if (free_vc_found)
+ break; /* we found a vcnumber that will work - use it */
+ }
+
+ if (i == 0)
+ vcnum = 0; /* for most common case, ie if one smb session, use
+ vc zero. Also for case when no free vcnum, zero
+ is safest to send (some clients only send zero) */
+ else if (free_vc_found == 0)
+ vcnum = 1; /* we can not reuse vc=0 safely, since some servers
+ reset all uids on that, but 1 is ok. */
+ else
+ vcnum = i;
+ ses->vcnum = vcnum;
+get_vc_num_exit:
+ write_unlock(&cifs_tcp_ses_lock);
+
+ return le16_to_cpu(vcnum);
+}
+
static __u32 cifs_ssetup_hdr(struct cifsSesInfo *ses, SESSION_SETUP_ANDX *pSMB)
{
__u32 capabilities = 0;
/* init fields common to all four types of SessSetup */
- /* note that header is initialized to zero in header_assemble */
+ /* Note that offsets for first seven fields in req struct are same */
+ /* in CIFS Specs so does not matter which of 3 forms of struct */
+ /* that we use in next few lines */
+ /* Note that header is initialized to zero in header_assemble */
pSMB->req.AndXCommand = 0xFF;
pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
+ pSMB->req.VcNumber = get_next_vcnum(ses);
/* Now no need to set SMBFLG_CASELESS or obsolete CANONICAL PATH */
@@ -71,7 +155,6 @@
if (ses->capabilities & CAP_UNIX)
capabilities |= CAP_UNIX;
- /* BB check whether to init vcnum BB */
return capabilities;
}
@@ -228,7 +311,7 @@
kfree(ses->serverOS);
/* UTF-8 string will not grow more than four times as big as UCS-16 */
- ses->serverOS = kzalloc(4 * len, GFP_KERNEL);
+ ses->serverOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
if (ses->serverOS != NULL)
cifs_strfromUCS_le(ses->serverOS, (__le16 *)data, len, nls_cp);
data += 2 * (len + 1);
@@ -241,7 +324,7 @@
return rc;
kfree(ses->serverNOS);
- ses->serverNOS = kzalloc(4 * len, GFP_KERNEL); /* BB this is wrong length FIXME BB */
+ ses->serverNOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
if (ses->serverNOS != NULL) {
cifs_strfromUCS_le(ses->serverNOS, (__le16 *)data, len,
nls_cp);
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 9c6d815..39bd4d3 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -1938,6 +1938,8 @@
/* Big K */
COMPATIBLE_IOCTL(PIO_FONT)
COMPATIBLE_IOCTL(GIO_FONT)
+COMPATIBLE_IOCTL(PIO_CMAP)
+COMPATIBLE_IOCTL(GIO_CMAP)
ULONG_IOCTL(KDSIGACCEPT)
COMPATIBLE_IOCTL(KDGETKEYCODE)
COMPATIBLE_IOCTL(KDSETKEYCODE)
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index aafc9eb..b0c87dc 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -868,7 +868,7 @@
{
unsigned len = le16_to_cpu(dlen);
- if (len == EXT4_MAX_REC_LEN)
+ if (len == EXT4_MAX_REC_LEN || len == 0)
return 1 << 16;
return len;
}
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 03ba20b..cbd2ca9 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -47,8 +47,10 @@
static inline int ext4_begin_ordered_truncate(struct inode *inode,
loff_t new_size)
{
- return jbd2_journal_begin_ordered_truncate(&EXT4_I(inode)->jinode,
- new_size);
+ return jbd2_journal_begin_ordered_truncate(
+ EXT4_SB(inode->i_sb)->s_journal,
+ &EXT4_I(inode)->jinode,
+ new_size);
}
static void ext4_invalidatepage(struct page *page, unsigned long offset);
@@ -2437,6 +2439,7 @@
int no_nrwrite_index_update;
int pages_written = 0;
long pages_skipped;
+ int range_cyclic, cycled = 1, io_done = 0;
int needed_blocks, ret = 0, nr_to_writebump = 0;
struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb);
@@ -2488,9 +2491,15 @@
if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
range_whole = 1;
- if (wbc->range_cyclic)
+ range_cyclic = wbc->range_cyclic;
+ if (wbc->range_cyclic) {
index = mapping->writeback_index;
- else
+ if (index)
+ cycled = 0;
+ wbc->range_start = index << PAGE_CACHE_SHIFT;
+ wbc->range_end = LLONG_MAX;
+ wbc->range_cyclic = 0;
+ } else
index = wbc->range_start >> PAGE_CACHE_SHIFT;
mpd.wbc = wbc;
@@ -2504,6 +2513,7 @@
wbc->no_nrwrite_index_update = 1;
pages_skipped = wbc->pages_skipped;
+retry:
while (!ret && wbc->nr_to_write > 0) {
/*
@@ -2546,6 +2556,7 @@
pages_written += mpd.pages_written;
wbc->pages_skipped = pages_skipped;
ret = 0;
+ io_done = 1;
} else if (wbc->nr_to_write)
/*
* There is no more writeout needed
@@ -2554,6 +2565,13 @@
*/
break;
}
+ if (!io_done && !cycled) {
+ cycled = 1;
+ index = 0;
+ wbc->range_start = index << PAGE_CACHE_SHIFT;
+ wbc->range_end = mapping->writeback_index - 1;
+ goto retry;
+ }
if (pages_skipped != wbc->pages_skipped)
printk(KERN_EMERG "This should not happen leaving %s "
"with nr_to_write = %ld ret = %d\n",
@@ -2561,6 +2579,7 @@
/* Update index */
index += pages_written;
+ wbc->range_cyclic = range_cyclic;
if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
/*
* set the writeback_index so that range_cyclic
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index deba54f..4415bee 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -3693,6 +3693,8 @@
pa->pa_free = pa->pa_len;
atomic_set(&pa->pa_count, 1);
spin_lock_init(&pa->pa_lock);
+ INIT_LIST_HEAD(&pa->pa_inode_list);
+ INIT_LIST_HEAD(&pa->pa_group_list);
pa->pa_deleted = 0;
pa->pa_linear = 0;
@@ -3755,6 +3757,7 @@
atomic_set(&pa->pa_count, 1);
spin_lock_init(&pa->pa_lock);
INIT_LIST_HEAD(&pa->pa_inode_list);
+ INIT_LIST_HEAD(&pa->pa_group_list);
pa->pa_deleted = 0;
pa->pa_linear = 1;
@@ -4476,23 +4479,26 @@
pa->pa_free -= ac->ac_b_ex.fe_len;
pa->pa_len -= ac->ac_b_ex.fe_len;
spin_unlock(&pa->pa_lock);
- /*
- * We want to add the pa to the right bucket.
- * Remove it from the list and while adding
- * make sure the list to which we are adding
- * doesn't grow big.
- */
- if (likely(pa->pa_free)) {
- spin_lock(pa->pa_obj_lock);
- list_del_rcu(&pa->pa_inode_list);
- spin_unlock(pa->pa_obj_lock);
- ext4_mb_add_n_trim(ac);
- }
}
- ext4_mb_put_pa(ac, ac->ac_sb, pa);
}
if (ac->alloc_semp)
up_read(ac->alloc_semp);
+ if (pa) {
+ /*
+ * We want to add the pa to the right bucket.
+ * Remove it from the list and while adding
+ * make sure the list to which we are adding
+ * doesn't grow big. We need to release
+ * alloc_semp before calling ext4_mb_add_n_trim()
+ */
+ if (pa->pa_linear && likely(pa->pa_free)) {
+ spin_lock(pa->pa_obj_lock);
+ list_del_rcu(&pa->pa_inode_list);
+ spin_unlock(pa->pa_obj_lock);
+ ext4_mb_add_n_trim(ac);
+ }
+ ext4_mb_put_pa(ac, ac->ac_sb, pa);
+ }
if (ac->ac_bitmap_page)
page_cache_release(ac->ac_bitmap_page);
if (ac->ac_buddy_page)
diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c
index 734abca..fe64d9f 100644
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -481,7 +481,7 @@
+ 1);
if (IS_ERR(handle)) {
retval = PTR_ERR(handle);
- goto err_out;
+ return retval;
}
tmp_inode = ext4_new_inode(handle,
inode->i_sb->s_root->d_inode,
@@ -489,8 +489,7 @@
if (IS_ERR(tmp_inode)) {
retval = -ENOMEM;
ext4_journal_stop(handle);
- tmp_inode = NULL;
- goto err_out;
+ return retval;
}
i_size_write(tmp_inode, i_size_read(inode));
/*
@@ -618,8 +617,7 @@
ext4_journal_stop(handle);
- if (tmp_inode)
- iput(tmp_inode);
+ iput(tmp_inode);
return retval;
}
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index e5f06a5..a5732c5 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3046,14 +3046,17 @@
static int ext4_sync_fs(struct super_block *sb, int wait)
{
int ret = 0;
+ tid_t target;
trace_mark(ext4_sync_fs, "dev %s wait %d", sb->s_id, wait);
sb->s_dirt = 0;
if (EXT4_SB(sb)->s_journal) {
- if (wait)
- ret = ext4_force_commit(sb);
- else
- jbd2_journal_start_commit(EXT4_SB(sb)->s_journal, NULL);
+ if (jbd2_journal_start_commit(EXT4_SB(sb)->s_journal,
+ &target)) {
+ if (wait)
+ jbd2_log_wait_commit(EXT4_SB(sb)->s_journal,
+ target);
+ }
} else {
ext4_commit_super(sb, EXT4_SB(sb)->s_es, wait);
}
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index eb34300..5814410 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -450,7 +450,7 @@
}
/*
- * Called under j_state_lock. Returns true if a transaction was started.
+ * Called under j_state_lock. Returns true if a transaction commit was started.
*/
int __jbd2_log_start_commit(journal_t *journal, tid_t target)
{
@@ -518,7 +518,8 @@
/*
* Start a commit of the current running transaction (if any). Returns true
- * if a transaction was started, and fills its tid in at *ptid
+ * if a transaction is going to be committed (or is currently already
+ * committing), and fills its tid in at *ptid
*/
int jbd2_journal_start_commit(journal_t *journal, tid_t *ptid)
{
@@ -528,15 +529,19 @@
if (journal->j_running_transaction) {
tid_t tid = journal->j_running_transaction->t_tid;
- ret = __jbd2_log_start_commit(journal, tid);
- if (ret && ptid)
+ __jbd2_log_start_commit(journal, tid);
+ /* There's a running transaction and we've just made sure
+ * it's commit has been scheduled. */
+ if (ptid)
*ptid = tid;
- } else if (journal->j_committing_transaction && ptid) {
+ ret = 1;
+ } else if (journal->j_committing_transaction) {
/*
* If ext3_write_super() recently started a commit, then we
* have to wait for completion of that transaction
*/
- *ptid = journal->j_committing_transaction->t_tid;
+ if (ptid)
+ *ptid = journal->j_committing_transaction->t_tid;
ret = 1;
}
spin_unlock(&journal->j_state_lock);
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 46b4e34..28ce21d 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -2129,26 +2129,46 @@
}
/*
- * This function must be called when inode is journaled in ordered mode
- * before truncation happens. It starts writeout of truncated part in
- * case it is in the committing transaction so that we stand to ordered
- * mode consistency guarantees.
+ * File truncate and transaction commit interact with each other in a
+ * non-trivial way. If a transaction writing data block A is
+ * committing, we cannot discard the data by truncate until we have
+ * written them. Otherwise if we crashed after the transaction with
+ * write has committed but before the transaction with truncate has
+ * committed, we could see stale data in block A. This function is a
+ * helper to solve this problem. It starts writeout of the truncated
+ * part in case it is in the committing transaction.
+ *
+ * Filesystem code must call this function when inode is journaled in
+ * ordered mode before truncation happens and after the inode has been
+ * placed on orphan list with the new inode size. The second condition
+ * avoids the race that someone writes new data and we start
+ * committing the transaction after this function has been called but
+ * before a transaction for truncate is started (and furthermore it
+ * allows us to optimize the case where the addition to orphan list
+ * happens in the same transaction as write --- we don't have to write
+ * any data in such case).
*/
-int jbd2_journal_begin_ordered_truncate(struct jbd2_inode *inode,
+int jbd2_journal_begin_ordered_truncate(journal_t *journal,
+ struct jbd2_inode *jinode,
loff_t new_size)
{
- journal_t *journal;
- transaction_t *commit_trans;
+ transaction_t *inode_trans, *commit_trans;
int ret = 0;
- if (!inode->i_transaction && !inode->i_next_transaction)
+ /* This is a quick check to avoid locking if not necessary */
+ if (!jinode->i_transaction)
goto out;
- journal = inode->i_transaction->t_journal;
+ /* Locks are here just to force reading of recent values, it is
+ * enough that the transaction was not committing before we started
+ * a transaction adding the inode to orphan list */
spin_lock(&journal->j_state_lock);
commit_trans = journal->j_committing_transaction;
spin_unlock(&journal->j_state_lock);
- if (inode->i_transaction == commit_trans) {
- ret = filemap_fdatawrite_range(inode->i_vfs_inode->i_mapping,
+ spin_lock(&journal->j_list_lock);
+ inode_trans = jinode->i_transaction;
+ spin_unlock(&journal->j_list_lock);
+ if (inode_trans == commit_trans) {
+ ret = filemap_fdatawrite_range(jinode->i_vfs_inode->i_mapping,
new_size, LLONG_MAX);
if (ret)
jbd2_journal_abort(journal, ret);
diff --git a/fs/namespace.c b/fs/namespace.c
index 228d8c4..06f8e63 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -614,9 +614,11 @@
*/
for_each_possible_cpu(cpu) {
struct mnt_writer *cpu_writer = &per_cpu(mnt_writers, cpu);
- if (cpu_writer->mnt != mnt)
- continue;
spin_lock(&cpu_writer->lock);
+ if (cpu_writer->mnt != mnt) {
+ spin_unlock(&cpu_writer->lock);
+ continue;
+ }
atomic_add(cpu_writer->count, &mnt->__mnt_writers);
cpu_writer->count = 0;
/*
diff --git a/fs/notify/inotify/inotify.c b/fs/notify/inotify/inotify.c
index dae3f28..331f2e8 100644
--- a/fs/notify/inotify/inotify.c
+++ b/fs/notify/inotify/inotify.c
@@ -156,7 +156,7 @@
int ret;
do {
- if (unlikely(!idr_pre_get(&ih->idr, GFP_KERNEL)))
+ if (unlikely(!idr_pre_get(&ih->idr, GFP_NOFS)))
return -ENOSPC;
ret = idr_get_new_above(&ih->idr, watch, ih->last_wd+1, &watch->wd);
} while (ret == -EAGAIN);
diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h
index 3c3532e..172850a 100644
--- a/fs/ocfs2/journal.h
+++ b/fs/ocfs2/journal.h
@@ -513,8 +513,10 @@
static inline int ocfs2_begin_ordered_truncate(struct inode *inode,
loff_t new_size)
{
- return jbd2_journal_begin_ordered_truncate(&OCFS2_I(inode)->ip_jinode,
- new_size);
+ return jbd2_journal_begin_ordered_truncate(
+ OCFS2_SB(inode->i_sb)->journal->j_journal,
+ &OCFS2_I(inode)->ip_jinode,
+ new_size);
}
#endif /* OCFS2_JOURNAL_H */
diff --git a/fs/seq_file.c b/fs/seq_file.c
index 5267098..a1a4cfe 100644
--- a/fs/seq_file.c
+++ b/fs/seq_file.c
@@ -48,8 +48,16 @@
*/
file->f_version = 0;
- /* SEQ files support lseek, but not pread/pwrite */
- file->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
+ /*
+ * seq_files support lseek() and pread(). They do not implement
+ * write() at all, but we clear FMODE_PWRITE here for historical
+ * reasons.
+ *
+ * If a client of seq_files a) implements file.write() and b) wishes to
+ * support pwrite() then that client will need to implement its own
+ * file.open() which calls seq_open() and then sets FMODE_PWRITE.
+ */
+ file->f_mode &= ~FMODE_PWRITE;
return 0;
}
EXPORT_SYMBOL(seq_open);
@@ -131,6 +139,22 @@
int err = 0;
mutex_lock(&m->lock);
+
+ /* Don't assume *ppos is where we left it */
+ if (unlikely(*ppos != m->read_pos)) {
+ m->read_pos = *ppos;
+ while ((err = traverse(m, *ppos)) == -EAGAIN)
+ ;
+ if (err) {
+ /* With prejudice... */
+ m->read_pos = 0;
+ m->version = 0;
+ m->index = 0;
+ m->count = 0;
+ goto Done;
+ }
+ }
+
/*
* seq_file->op->..m_start/m_stop/m_next may do special actions
* or optimisations based on the file->f_version, so we want to
@@ -230,8 +254,10 @@
Done:
if (!copied)
copied = err;
- else
+ else {
*ppos += copied;
+ m->read_pos += copied;
+ }
file->f_version = m->version;
mutex_unlock(&m->lock);
return copied;
@@ -266,16 +292,18 @@
if (offset < 0)
break;
retval = offset;
- if (offset != file->f_pos) {
+ if (offset != m->read_pos) {
while ((retval=traverse(m, offset)) == -EAGAIN)
;
if (retval) {
/* with extreme prejudice... */
file->f_pos = 0;
+ m->read_pos = 0;
m->version = 0;
m->index = 0;
m->count = 0;
} else {
+ m->read_pos = offset;
retval = file->f_pos = offset;
}
}
diff --git a/fs/super.c b/fs/super.c
index 61dce00..8349ed6 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -82,7 +82,22 @@
* lock ordering than usbfs:
*/
lockdep_set_class(&s->s_lock, &type->s_lock_key);
- down_write(&s->s_umount);
+ /*
+ * sget() can have s_umount recursion.
+ *
+ * When it cannot find a suitable sb, it allocates a new
+ * one (this one), and tries again to find a suitable old
+ * one.
+ *
+ * In case that succeeds, it will acquire the s_umount
+ * lock of the old one. Since these are clearly distrinct
+ * locks, and this object isn't exposed yet, there's no
+ * risk of deadlocks.
+ *
+ * Annotate this by putting this lock in a different
+ * subclass.
+ */
+ down_write_nested(&s->s_umount, SINGLE_DEPTH_NESTING);
s->s_count = S_BIAS;
atomic_set(&s->s_active, 1);
mutex_init(&s->s_vfs_rename_mutex);
diff --git a/fs/timerfd.c b/fs/timerfd.c
index 6a123b8..b042bd7 100644
--- a/fs/timerfd.c
+++ b/fs/timerfd.c
@@ -186,10 +186,9 @@
BUILD_BUG_ON(TFD_CLOEXEC != O_CLOEXEC);
BUILD_BUG_ON(TFD_NONBLOCK != O_NONBLOCK);
- if (flags & ~(TFD_CLOEXEC | TFD_NONBLOCK))
- return -EINVAL;
- if (clockid != CLOCK_MONOTONIC &&
- clockid != CLOCK_REALTIME)
+ if ((flags & ~TFD_CREATE_FLAGS) ||
+ (clockid != CLOCK_MONOTONIC &&
+ clockid != CLOCK_REALTIME))
return -EINVAL;
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
@@ -201,7 +200,7 @@
hrtimer_init(&ctx->tmr, clockid, HRTIMER_MODE_ABS);
ufd = anon_inode_getfd("[timerfd]", &timerfd_fops, ctx,
- flags & (O_CLOEXEC | O_NONBLOCK));
+ flags & TFD_SHARED_FCNTL_FLAGS);
if (ufd < 0)
kfree(ctx);
@@ -219,7 +218,8 @@
if (copy_from_user(&ktmr, utmr, sizeof(ktmr)))
return -EFAULT;
- if (!timespec_valid(&ktmr.it_value) ||
+ if ((flags & ~TFD_SETTIME_FLAGS) ||
+ !timespec_valid(&ktmr.it_value) ||
!timespec_valid(&ktmr.it_interval))
return -EINVAL;
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index d71dc44..cb329ed 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -166,6 +166,75 @@
}
/*
+ * Mapping of multi-page buffers into contiguous virtual space
+ */
+
+typedef struct a_list {
+ void *vm_addr;
+ struct a_list *next;
+} a_list_t;
+
+static a_list_t *as_free_head;
+static int as_list_len;
+static DEFINE_SPINLOCK(as_lock);
+
+/*
+ * Try to batch vunmaps because they are costly.
+ */
+STATIC void
+free_address(
+ void *addr)
+{
+ a_list_t *aentry;
+
+#ifdef CONFIG_XEN
+ /*
+ * Xen needs to be able to make sure it can get an exclusive
+ * RO mapping of pages it wants to turn into a pagetable. If
+ * a newly allocated page is also still being vmap()ed by xfs,
+ * it will cause pagetable construction to fail. This is a
+ * quick workaround to always eagerly unmap pages so that Xen
+ * is happy.
+ */
+ vunmap(addr);
+ return;
+#endif
+
+ aentry = kmalloc(sizeof(a_list_t), GFP_NOWAIT);
+ if (likely(aentry)) {
+ spin_lock(&as_lock);
+ aentry->next = as_free_head;
+ aentry->vm_addr = addr;
+ as_free_head = aentry;
+ as_list_len++;
+ spin_unlock(&as_lock);
+ } else {
+ vunmap(addr);
+ }
+}
+
+STATIC void
+purge_addresses(void)
+{
+ a_list_t *aentry, *old;
+
+ if (as_free_head == NULL)
+ return;
+
+ spin_lock(&as_lock);
+ aentry = as_free_head;
+ as_free_head = NULL;
+ as_list_len = 0;
+ spin_unlock(&as_lock);
+
+ while ((old = aentry) != NULL) {
+ vunmap(aentry->vm_addr);
+ aentry = aentry->next;
+ kfree(old);
+ }
+}
+
+/*
* Internal xfs_buf_t object manipulation
*/
@@ -264,7 +333,7 @@
uint i;
if ((bp->b_flags & XBF_MAPPED) && (bp->b_page_count > 1))
- vm_unmap_ram(bp->b_addr - bp->b_offset, bp->b_page_count);
+ free_address(bp->b_addr - bp->b_offset);
for (i = 0; i < bp->b_page_count; i++) {
struct page *page = bp->b_pages[i];
@@ -386,8 +455,10 @@
bp->b_addr = page_address(bp->b_pages[0]) + bp->b_offset;
bp->b_flags |= XBF_MAPPED;
} else if (flags & XBF_MAPPED) {
- bp->b_addr = vm_map_ram(bp->b_pages, bp->b_page_count,
- -1, PAGE_KERNEL);
+ if (as_list_len > 64)
+ purge_addresses();
+ bp->b_addr = vmap(bp->b_pages, bp->b_page_count,
+ VM_MAP, PAGE_KERNEL);
if (unlikely(bp->b_addr == NULL))
return -ENOMEM;
bp->b_addr += bp->b_offset;
@@ -1672,6 +1743,8 @@
count++;
}
+ if (as_list_len > 0)
+ purge_addresses();
if (count)
blk_run_address_space(target->bt_mapping);
diff --git a/include/asm-frv/pgtable.h b/include/asm-frv/pgtable.h
index 83c51aba..e16fdb1 100644
--- a/include/asm-frv/pgtable.h
+++ b/include/asm-frv/pgtable.h
@@ -478,7 +478,7 @@
#define __swp_type(x) (((x).val >> 2) & 0x1f)
#define __swp_offset(x) ((x).val >> 8)
#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 8) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte })
+#define __pte_to_swp_entry(_pte) ((swp_entry_t) { (_pte).pte })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
static inline int pte_file(pte_t pte)
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index 8190b9b..e5f4ae9 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -1321,6 +1321,8 @@
struct drm_gem_object *drm_gem_object_alloc(struct drm_device *dev,
size_t size);
void drm_gem_object_handle_free(struct kref *kref);
+void drm_gem_vm_open(struct vm_area_struct *vma);
+void drm_gem_vm_close(struct vm_area_struct *vma);
int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma);
static inline void
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index d54de24..5ded1ac 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -609,7 +609,7 @@
extern char *drm_get_dvi_i_select_name(int val);
extern char *drm_get_tv_subconnector_name(int val);
extern char *drm_get_tv_select_name(int val);
-extern void drm_fb_release(struct file *filp);
+extern void drm_fb_release(struct drm_file *file_priv);
extern int drm_mode_group_init_legacy_group(struct drm_device *dev, struct drm_mode_group *group);
extern struct edid *drm_get_edid(struct drm_connector *connector,
struct i2c_adapter *adapter);
diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h
index 0c6f0e1..0b0d236 100644
--- a/include/drm/drm_crtc_helper.h
+++ b/include/drm/drm_crtc_helper.h
@@ -54,13 +54,13 @@
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
/* Actually set the mode */
- void (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode, int x, int y,
- struct drm_framebuffer *old_fb);
+ int (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode, int x, int y,
+ struct drm_framebuffer *old_fb);
/* Move the crtc on the current fb to the given position *optional* */
- void (*mode_set_base)(struct drm_crtc *crtc, int x, int y,
- struct drm_framebuffer *old_fb);
+ int (*mode_set_base)(struct drm_crtc *crtc, int x, int y,
+ struct drm_framebuffer *old_fb);
};
struct drm_encoder_helper_funcs {
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 2aa283a..1b16108 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -171,8 +171,6 @@
#define BIO_RW_FAILFAST_TRANSPORT 8
#define BIO_RW_FAILFAST_DRIVER 9
-#define BIO_RW_SYNC (BIO_RW_SYNCIO | BIO_RW_UNPLUG)
-
#define bio_rw_flagged(bio, flag) ((bio)->bi_rw & (1 << (flag)))
/*
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index 25379cb..6e91587 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -15,6 +15,7 @@
BLK_TC_WRITE = 1 << 1, /* writes */
BLK_TC_BARRIER = 1 << 2, /* barrier */
BLK_TC_SYNC = 1 << 3, /* sync IO */
+ BLK_TC_SYNCIO = BLK_TC_SYNC,
BLK_TC_QUEUE = 1 << 4, /* queueing/merging */
BLK_TC_REQUEUE = 1 << 5, /* requeueing */
BLK_TC_ISSUE = 1 << 6, /* issue */
diff --git a/include/linux/device.h b/include/linux/device.h
index 45e5b19..47f343c 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -147,6 +147,8 @@
extern struct device_driver *driver_find(const char *name,
struct bus_type *bus);
extern int driver_probe_done(void);
+extern int wait_for_device_probe(void);
+
/* sysfs interface for exporting driver attributes */
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 3e68469..f041384 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -121,6 +121,7 @@
* @local: per-cpu pointer to a struct dma_chan_percpu
* @client-count: how many clients are using this channel
* @table_count: number of appearances in the mem-to-mem allocation table
+ * @private: private data for certain client-channel associations
*/
struct dma_chan {
struct dma_device *device;
@@ -134,6 +135,7 @@
struct dma_chan_percpu *local;
int client_count;
int table_count;
+ void *private;
};
/**
diff --git a/include/linux/firmware-map.h b/include/linux/firmware-map.h
index 6e199c8..cca686b 100644
--- a/include/linux/firmware-map.h
+++ b/include/linux/firmware-map.h
@@ -1,7 +1,7 @@
/*
* include/linux/firmware-map.h:
* Copyright (C) 2008 SUSE LINUX Products GmbH
- * by Bernhard Walle <bwalle@suse.de>
+ * by Bernhard Walle <bernhard.walle@gmx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License v2.0 as published by
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 6022f44..92734c0 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -54,24 +54,30 @@
#define MAY_ACCESS 16
#define MAY_OPEN 32
+/*
+ * flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond
+ * to O_WRONLY and O_RDWR via the strange trick in __dentry_open()
+ */
+
/* file is open for reading */
#define FMODE_READ ((__force fmode_t)1)
/* file is open for writing */
#define FMODE_WRITE ((__force fmode_t)2)
/* file is seekable */
#define FMODE_LSEEK ((__force fmode_t)4)
-/* file can be accessed using pread/pwrite */
+/* file can be accessed using pread */
#define FMODE_PREAD ((__force fmode_t)8)
-#define FMODE_PWRITE FMODE_PREAD /* These go hand in hand */
+/* file can be accessed using pwrite */
+#define FMODE_PWRITE ((__force fmode_t)16)
/* File is opened for execution with sys_execve / sys_uselib */
-#define FMODE_EXEC ((__force fmode_t)16)
+#define FMODE_EXEC ((__force fmode_t)32)
/* File is opened with O_NDELAY (only set for block devices) */
-#define FMODE_NDELAY ((__force fmode_t)32)
+#define FMODE_NDELAY ((__force fmode_t)64)
/* File is opened with O_EXCL (only set for block devices) */
-#define FMODE_EXCL ((__force fmode_t)64)
+#define FMODE_EXCL ((__force fmode_t)128)
/* File is opened using open(.., 3, ..) and is writeable only for ioctls
(specialy hack for floppy.c) */
-#define FMODE_WRITE_IOCTL ((__force fmode_t)128)
+#define FMODE_WRITE_IOCTL ((__force fmode_t)256)
/*
* Don't update ctime and mtime.
@@ -87,10 +93,10 @@
#define WRITE 1
#define READA 2 /* read-ahead - don't block if no resources */
#define SWRITE 3 /* for ll_rw_block() - wait for buffer lock */
-#define READ_SYNC (READ | (1 << BIO_RW_SYNC))
+#define READ_SYNC (READ | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG))
#define READ_META (READ | (1 << BIO_RW_META))
-#define WRITE_SYNC (WRITE | (1 << BIO_RW_SYNC))
-#define SWRITE_SYNC (SWRITE | (1 << BIO_RW_SYNC))
+#define WRITE_SYNC (WRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG))
+#define SWRITE_SYNC (SWRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG))
#define WRITE_BARRIER (WRITE | (1 << BIO_RW_BARRIER))
#define DISCARD_NOBARRIER (1 << BIO_RW_DISCARD)
#define DISCARD_BARRIER ((1 << BIO_RW_DISCARD) | (1 << BIO_RW_BARRIER))
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index b28b37e..4d248b3 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -1150,7 +1150,8 @@
extern int jbd2_journal_bmap(journal_t *, unsigned long, unsigned long long *);
extern int jbd2_journal_force_commit(journal_t *);
extern int jbd2_journal_file_inode(handle_t *handle, struct jbd2_inode *inode);
-extern int jbd2_journal_begin_ordered_truncate(struct jbd2_inode *inode, loff_t new_size);
+extern int jbd2_journal_begin_ordered_truncate(journal_t *journal,
+ struct jbd2_inode *inode, loff_t new_size);
extern void jbd2_journal_init_jbd_inode(struct jbd2_inode *jinode, struct inode *inode);
extern void jbd2_journal_release_jbd_inode(journal_t *journal, struct jbd2_inode *jinode);
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index 5715f19..0424326f 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -58,10 +58,10 @@
__u32 pad;
union {
char dummy[512]; /* reserving space */
-#ifdef CONFIG_X86
+#ifdef __KVM_HAVE_PIT
struct kvm_pic_state pic;
#endif
-#if defined(CONFIG_X86) || defined(CONFIG_IA64)
+#ifdef __KVM_HAVE_IOAPIC
struct kvm_ioapic_state ioapic;
#endif
} chip;
@@ -384,16 +384,16 @@
#define KVM_CAP_MP_STATE 14
#define KVM_CAP_COALESCED_MMIO 15
#define KVM_CAP_SYNC_MMU 16 /* Changes to host mmap are reflected in guest */
-#if defined(CONFIG_X86)||defined(CONFIG_IA64)
+#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
#define KVM_CAP_DEVICE_ASSIGNMENT 17
#endif
#define KVM_CAP_IOMMU 18
-#if defined(CONFIG_X86)
+#ifdef __KVM_HAVE_MSI
#define KVM_CAP_DEVICE_MSI 20
#endif
/* Bug in KVM_SET_USER_MEMORY_REGION fixed: */
#define KVM_CAP_DESTROY_MEMORY_REGION_WORKS 21
-#if defined(CONFIG_X86)
+#ifdef __KVM_HAVE_USER_NMI
#define KVM_CAP_USER_NMI 22
#endif
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index ec49d0b..bf6f703 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -285,6 +285,7 @@
struct kvm *kvm_arch_create_vm(void);
void kvm_arch_destroy_vm(struct kvm *kvm);
void kvm_free_all_assigned_devices(struct kvm *kvm);
+void kvm_arch_sync_events(struct kvm *kvm);
int kvm_cpu_get_interrupt(struct kvm_vcpu *v);
int kvm_cpu_has_interrupt(struct kvm_vcpu *v);
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 3235615..065cdf8 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1041,10 +1041,23 @@
typedef int (*work_fn_t)(unsigned long, unsigned long, void *);
extern void work_with_active_regions(int nid, work_fn_t work_fn, void *data);
extern void sparse_memory_present_with_active_regions(int nid);
-#ifndef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-extern int early_pfn_to_nid(unsigned long pfn);
-#endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */
#endif /* CONFIG_ARCH_POPULATES_NODE_MAP */
+
+#if !defined(CONFIG_ARCH_POPULATES_NODE_MAP) && \
+ !defined(CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID)
+static inline int __early_pfn_to_nid(unsigned long pfn)
+{
+ return 0;
+}
+#else
+/* please see mm/page_alloc.c */
+extern int __meminit early_pfn_to_nid(unsigned long pfn);
+#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
+/* there is a per-arch backend function. */
+extern int __meminit __early_pfn_to_nid(unsigned long pfn);
+#endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */
+#endif
+
extern void set_dma_reserve(unsigned long new_dma_reserve);
extern void memmap_init_zone(unsigned long, int, unsigned long,
unsigned long, enum memmap_context);
@@ -1159,6 +1172,7 @@
/* mm/page-writeback.c */
int write_one_page(struct page *page, int wait);
+void task_dirty_inc(struct task_struct *tsk);
/* readahead.c */
#define VM_MAX_READAHEAD 128 /* kbytes */
@@ -1304,5 +1318,6 @@
extern void *alloc_locked_buffer(size_t size);
extern void free_locked_buffer(void *buffer, size_t size);
+extern void release_locked_buffer(void *buffer, size_t size);
#endif /* __KERNEL__ */
#endif /* _LINUX_MM_H */
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 09c14e2..1aca6ce 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -1071,7 +1071,7 @@
#endif /* CONFIG_SPARSEMEM */
#ifdef CONFIG_NODES_SPAN_OTHER_NODES
-#define early_pfn_in_nid(pfn, nid) (early_pfn_to_nid(pfn) == (nid))
+bool early_pfn_in_nid(unsigned long pfn, int nid);
#else
#define early_pfn_in_nid(pfn, nid) (1)
#endif
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 52a9fe0..aca8c45 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1312,6 +1312,7 @@
#define PCI_DEVICE_ID_VIA_VT3351 0x0351
#define PCI_DEVICE_ID_VIA_VT3364 0x0364
#define PCI_DEVICE_ID_VIA_8371_0 0x0391
+#define PCI_DEVICE_ID_VIA_6415 0x0415
#define PCI_DEVICE_ID_VIA_8501_0 0x0501
#define PCI_DEVICE_ID_VIA_82C561 0x0561
#define PCI_DEVICE_ID_VIA_82C586_1 0x0571
@@ -1444,6 +1445,7 @@
#define PCI_DEVICE_ID_DIGI_DF_M_E 0x0071
#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A 0x0072
#define PCI_DEVICE_ID_DIGI_DF_M_A 0x0073
+#define PCI_DEVICE_ID_DIGI_NEO_8 0x00B1
#define PCI_DEVICE_ID_NEO_2DB9 0x00C8
#define PCI_DEVICE_ID_NEO_2DB9PRI 0x00C9
#define PCI_DEVICE_ID_NEO_2RJ45 0x00CA
@@ -2321,6 +2323,9 @@
#define PCI_DEVICE_ID_INTEL_82378 0x0484
#define PCI_DEVICE_ID_INTEL_I960 0x0960
#define PCI_DEVICE_ID_INTEL_I960RM 0x0962
+#define PCI_DEVICE_ID_INTEL_8257X_SOL 0x1062
+#define PCI_DEVICE_ID_INTEL_82573E_SOL 0x1085
+#define PCI_DEVICE_ID_INTEL_82573L_SOL 0x108F
#define PCI_DEVICE_ID_INTEL_82815_MC 0x1130
#define PCI_DEVICE_ID_INTEL_82815_CGC 0x1132
#define PCI_DEVICE_ID_INTEL_82092AA_0 0x1221
diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h
index 40ea505..f616f31 100644
--- a/include/linux/seq_file.h
+++ b/include/linux/seq_file.h
@@ -19,6 +19,7 @@
size_t from;
size_t count;
loff_t index;
+ loff_t read_pos;
u64 version;
struct mutex lock;
const struct seq_operations *op;
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 90bbbf0..df9245c 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -296,6 +296,7 @@
#define UPF_HARDPPS_CD ((__force upf_t) (1 << 11))
#define UPF_LOW_LATENCY ((__force upf_t) (1 << 13))
#define UPF_BUGGY_UART ((__force upf_t) (1 << 14))
+#define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15))
#define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16))
#define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
#define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
diff --git a/include/linux/slab.h b/include/linux/slab.h
index f96d13c..24c5602 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -127,6 +127,7 @@
void * __must_check __krealloc(const void *, size_t, gfp_t);
void * __must_check krealloc(const void *, size_t, gfp_t);
void kfree(const void *);
+void kzfree(const void *);
size_t ksize(const void *);
/*
diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h
index bf8de28..eed4254 100644
--- a/include/linux/spi/spi_bitbang.h
+++ b/include/linux/spi/spi_bitbang.h
@@ -83,6 +83,13 @@
* int getmiso(struct spi_device *);
* void spidelay(unsigned);
*
+ * setsck()'s is_on parameter is a zero/nonzero boolean.
+ *
+ * setmosi()'s is_on parameter is a zero/nonzero boolean.
+ *
+ * getmiso() is required to return 0 or 1 only. Any other value is invalid
+ * and will result in improper operation.
+ *
* A non-inlined routine would call bitbang_txrx_*() routines. The
* main loop could easily compile down to a handful of instructions,
* especially if the delay is a NOP (to run at peak speed).
diff --git a/include/linux/timerfd.h b/include/linux/timerfd.h
index 86cb050..2d07929 100644
--- a/include/linux/timerfd.h
+++ b/include/linux/timerfd.h
@@ -11,13 +11,21 @@
/* For O_CLOEXEC and O_NONBLOCK */
#include <linux/fcntl.h>
-/* Flags for timerfd_settime. */
+/*
+ * CAREFUL: Check include/asm-generic/fcntl.h when defining
+ * new flags, since they might collide with O_* ones. We want
+ * to re-use O_* flags that couldn't possibly have a meaning
+ * from eventfd, in order to leave a free define-space for
+ * shared O_* flags.
+ */
#define TFD_TIMER_ABSTIME (1 << 0)
-
-/* Flags for timerfd_create. */
#define TFD_CLOEXEC O_CLOEXEC
#define TFD_NONBLOCK O_NONBLOCK
+#define TFD_SHARED_FCNTL_FLAGS (TFD_CLOEXEC | TFD_NONBLOCK)
+/* Flags for timerfd_create. */
+#define TFD_CREATE_FLAGS TFD_SHARED_FCNTL_FLAGS
+/* Flags for timerfd_settime. */
+#define TFD_SETTIME_FLAGS TFD_TIMER_ABSTIME
#endif /* _LINUX_TIMERFD_H */
-
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index 506e762..9c0890c 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -84,6 +84,10 @@
unsigned long flags, void *caller);
extern struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags,
unsigned long start, unsigned long end);
+extern struct vm_struct *__get_vm_area_caller(unsigned long size,
+ unsigned long flags,
+ unsigned long start, unsigned long end,
+ void *caller);
extern struct vm_struct *get_vm_area_node(unsigned long size,
unsigned long flags, int node,
gfp_t gfp_mask);
diff --git a/init/do_mounts.c b/init/do_mounts.c
index 708105e..8d4ff5a 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -370,10 +370,14 @@
ssleep(root_delay);
}
- /* wait for the known devices to complete their probing */
- while (driver_probe_done() != 0)
- msleep(100);
- async_synchronize_full();
+ /*
+ * wait for the known devices to complete their probing
+ *
+ * Note: this is a potential source of long boot delays.
+ * For example, it is not atypical to wait 5 seconds here
+ * for the touchpad of a laptop to initialize.
+ */
+ wait_for_device_probe();
md_run_setup();
@@ -399,6 +403,7 @@
while (driver_probe_done() != 0 ||
(ROOT_DEV = name_to_dev_t(saved_root_name)) == 0)
msleep(100);
+ async_synchronize_full();
}
is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
diff --git a/init/do_mounts_md.c b/init/do_mounts_md.c
index ff95e31..9bdddbc 100644
--- a/init/do_mounts_md.c
+++ b/init/do_mounts_md.c
@@ -281,8 +281,9 @@
*/
printk(KERN_INFO "md: Waiting for all devices to be available before autodetect\n");
printk(KERN_INFO "md: If you don't use raid, use raid=noautodetect\n");
- while (driver_probe_done() < 0)
- msleep(100);
+
+ wait_for_device_probe();
+
fd = sys_open("/dev/md0", 0, 0);
if (fd >= 0) {
sys_ioctl(fd, RAID_AUTORUN, raid_autopart);
diff --git a/kernel/Makefile b/kernel/Makefile
index 170a921..e4791b3 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -51,6 +51,7 @@
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_KALLSYMS) += kallsyms.o
obj-$(CONFIG_PM) += power/
+obj-$(CONFIG_FREEZER) += power/
obj-$(CONFIG_BSD_PROCESS_ACCT) += acct.o
obj-$(CONFIG_KEXEC) += kexec.o
obj-$(CONFIG_BACKTRACE_SELF_TEST) += backtracetest.o
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index e14db9c..9edb5c4 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -1122,8 +1122,8 @@
mutex_unlock(&cgroup_mutex);
- kfree(root);
kill_litter_super(sb);
+ kfree(root);
}
static struct file_system_type cgroup_fs_type = {
diff --git a/kernel/futex.c b/kernel/futex.c
index f89d373..438701a 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -1165,6 +1165,7 @@
u32 val, ktime_t *abs_time, u32 bitset, int clockrt)
{
struct task_struct *curr = current;
+ struct restart_block *restart;
DECLARE_WAITQUEUE(wait, curr);
struct futex_hash_bucket *hb;
struct futex_q q;
@@ -1216,11 +1217,13 @@
if (!ret)
goto retry;
- return ret;
+ goto out;
}
ret = -EWOULDBLOCK;
- if (uval != val)
- goto out_unlock_put_key;
+ if (unlikely(uval != val)) {
+ queue_unlock(&q, hb);
+ goto out_put_key;
+ }
/* Only actually queue if *uaddr contained val. */
queue_me(&q, hb);
@@ -1284,38 +1287,38 @@
*/
/* If we were woken (and unqueued), we succeeded, whatever. */
+ ret = 0;
if (!unqueue_me(&q))
- return 0;
+ goto out_put_key;
+ ret = -ETIMEDOUT;
if (rem)
- return -ETIMEDOUT;
+ goto out_put_key;
/*
* We expect signal_pending(current), but another thread may
* have handled it for us already.
*/
+ ret = -ERESTARTSYS;
if (!abs_time)
- return -ERESTARTSYS;
- else {
- struct restart_block *restart;
- restart = ¤t_thread_info()->restart_block;
- restart->fn = futex_wait_restart;
- restart->futex.uaddr = (u32 *)uaddr;
- restart->futex.val = val;
- restart->futex.time = abs_time->tv64;
- restart->futex.bitset = bitset;
- restart->futex.flags = 0;
+ goto out_put_key;
- if (fshared)
- restart->futex.flags |= FLAGS_SHARED;
- if (clockrt)
- restart->futex.flags |= FLAGS_CLOCKRT;
- return -ERESTART_RESTARTBLOCK;
- }
+ restart = ¤t_thread_info()->restart_block;
+ restart->fn = futex_wait_restart;
+ restart->futex.uaddr = (u32 *)uaddr;
+ restart->futex.val = val;
+ restart->futex.time = abs_time->tv64;
+ restart->futex.bitset = bitset;
+ restart->futex.flags = 0;
-out_unlock_put_key:
- queue_unlock(&q, hb);
+ if (fshared)
+ restart->futex.flags |= FLAGS_SHARED;
+ if (clockrt)
+ restart->futex.flags |= FLAGS_CLOCKRT;
+
+ ret = -ERESTART_RESTARTBLOCK;
+
+out_put_key:
put_futex_key(fshared, &q.key);
-
out:
return ret;
}
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index 2313a4c..e976e50 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -681,6 +681,33 @@
}
/*
+ * Sample a process (thread group) timer for the given group_leader task.
+ * Must be called with tasklist_lock held for reading.
+ */
+static int cpu_timer_sample_group(const clockid_t which_clock,
+ struct task_struct *p,
+ union cpu_time_count *cpu)
+{
+ struct task_cputime cputime;
+
+ thread_group_cputimer(p, &cputime);
+ switch (CPUCLOCK_WHICH(which_clock)) {
+ default:
+ return -EINVAL;
+ case CPUCLOCK_PROF:
+ cpu->cpu = cputime_add(cputime.utime, cputime.stime);
+ break;
+ case CPUCLOCK_VIRT:
+ cpu->cpu = cputime.utime;
+ break;
+ case CPUCLOCK_SCHED:
+ cpu->sched = cputime.sum_exec_runtime + task_delta_exec(p);
+ break;
+ }
+ return 0;
+}
+
+/*
* Guts of sys_timer_settime for CPU timers.
* This is called with the timer locked and interrupts disabled.
* If we return TIMER_RETRY, it's necessary to release the timer's lock
@@ -741,7 +768,7 @@
if (CPUCLOCK_PERTHREAD(timer->it_clock)) {
cpu_clock_sample(timer->it_clock, p, &val);
} else {
- cpu_clock_sample_group(timer->it_clock, p, &val);
+ cpu_timer_sample_group(timer->it_clock, p, &val);
}
if (old) {
@@ -889,7 +916,7 @@
read_unlock(&tasklist_lock);
goto dead;
} else {
- cpu_clock_sample_group(timer->it_clock, p, &now);
+ cpu_timer_sample_group(timer->it_clock, p, &now);
clear_dead = (unlikely(p->exit_state) &&
thread_group_empty(p));
}
@@ -1244,7 +1271,7 @@
clear_dead_task(timer, now);
goto out_unlock;
}
- cpu_clock_sample_group(timer->it_clock, p, &now);
+ cpu_timer_sample_group(timer->it_clock, p, &now);
bump_cpu_timer(timer, now);
/* Leave the tasklist_lock locked for the call below. */
}
@@ -1409,33 +1436,6 @@
}
/*
- * Sample a process (thread group) timer for the given group_leader task.
- * Must be called with tasklist_lock held for reading.
- */
-static int cpu_timer_sample_group(const clockid_t which_clock,
- struct task_struct *p,
- union cpu_time_count *cpu)
-{
- struct task_cputime cputime;
-
- thread_group_cputimer(p, &cputime);
- switch (CPUCLOCK_WHICH(which_clock)) {
- default:
- return -EINVAL;
- case CPUCLOCK_PROF:
- cpu->cpu = cputime_add(cputime.utime, cputime.stime);
- break;
- case CPUCLOCK_VIRT:
- cpu->cpu = cputime.utime;
- break;
- case CPUCLOCK_SCHED:
- cpu->sched = cputime.sum_exec_runtime + task_delta_exec(p);
- break;
- }
- return 0;
-}
-
-/*
* Set one of the process-wide special case CPU timers.
* The tsk->sighand->siglock must be held by the caller.
* The *newval argument is relative and we update it to be absolute, *oldval
diff --git a/kernel/power/Makefile b/kernel/power/Makefile
index d7a1016..720ea4f 100644
--- a/kernel/power/Makefile
+++ b/kernel/power/Makefile
@@ -3,7 +3,7 @@
EXTRA_CFLAGS += -DDEBUG
endif
-obj-y := main.o
+obj-$(CONFIG_PM) += main.o
obj-$(CONFIG_PM_SLEEP) += console.o
obj-$(CONFIG_FREEZER) += process.o
obj-$(CONFIG_HIBERNATION) += swsusp.o disk.o snapshot.o swap.o user.o
diff --git a/kernel/power/console.c b/kernel/power/console.c
index b8628be..a3961b20 100644
--- a/kernel/power/console.c
+++ b/kernel/power/console.c
@@ -78,6 +78,12 @@
}
set_console(orig_fgconsole);
release_console_sem();
+
+ if (vt_waitactive(orig_fgconsole)) {
+ pr_debug("Resume: Can't switch VCs.");
+ return;
+ }
+
kmsg_redirect = orig_kmsg;
}
#endif
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index 432ee57..7b40e94b 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -595,6 +595,12 @@
unsigned int flags;
/*
+ * If the user said "noresume".. bail out early.
+ */
+ if (noresume)
+ return 0;
+
+ /*
* name_to_dev_t() below takes a sysfs buffer mutex when sysfs
* is configured into the kernel. Since the regular hibernate
* trigger path is via sysfs which takes a buffer mutex before
@@ -610,6 +616,11 @@
mutex_unlock(&pm_mutex);
return -ENOENT;
}
+ /*
+ * Some device discovery might still be in progress; we need
+ * to wait for this to finish.
+ */
+ wait_for_device_probe();
swsusp_resume_device = name_to_dev_t(resume_file);
pr_debug("PM: Resume from partition %s\n", resume_file);
} else {
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index 6da1435..505f319 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -60,6 +60,7 @@
static int submit(int rw, pgoff_t page_off, struct page *page,
struct bio **bio_chain)
{
+ const int bio_rw = rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
struct bio *bio;
bio = bio_alloc(__GFP_WAIT | __GFP_HIGH, 1);
@@ -80,7 +81,7 @@
bio_get(bio);
if (bio_chain == NULL) {
- submit_bio(rw | (1 << BIO_RW_SYNC), bio);
+ submit_bio(bio_rw, bio);
wait_on_page_locked(page);
if (rw == READ)
bio_set_pages_dirty(bio);
@@ -90,7 +91,7 @@
get_page(page); /* These pages are freed later */
bio->bi_private = *bio_chain;
*bio_chain = bio;
- submit_bio(rw | (1 << BIO_RW_SYNC), bio);
+ submit_bio(bio_rw, bio);
}
return 0;
}
diff --git a/kernel/power/user.c b/kernel/power/user.c
index 005b93d..6c85359 100644
--- a/kernel/power/user.c
+++ b/kernel/power/user.c
@@ -95,15 +95,15 @@
data->swap = swsusp_resume_device ?
swap_type_of(swsusp_resume_device, 0, NULL) : -1;
data->mode = O_RDONLY;
- error = pm_notifier_call_chain(PM_RESTORE_PREPARE);
- if (error)
- pm_notifier_call_chain(PM_POST_RESTORE);
- } else {
- data->swap = -1;
- data->mode = O_WRONLY;
error = pm_notifier_call_chain(PM_HIBERNATION_PREPARE);
if (error)
pm_notifier_call_chain(PM_POST_HIBERNATION);
+ } else {
+ data->swap = -1;
+ data->mode = O_WRONLY;
+ error = pm_notifier_call_chain(PM_RESTORE_PREPARE);
+ if (error)
+ pm_notifier_call_chain(PM_POST_RESTORE);
}
if (error)
atomic_inc(&snapshot_device_available);
diff --git a/kernel/printk.c b/kernel/printk.c
index 69188f2..e3602d0 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -73,7 +73,6 @@
* driver system.
*/
static DECLARE_MUTEX(console_sem);
-static DECLARE_MUTEX(secondary_console_sem);
struct console *console_drivers;
EXPORT_SYMBOL_GPL(console_drivers);
@@ -891,12 +890,14 @@
printk("Suspending console(s) (use no_console_suspend to debug)\n");
acquire_console_sem();
console_suspended = 1;
+ up(&console_sem);
}
void resume_console(void)
{
if (!console_suspend_enabled)
return;
+ down(&console_sem);
console_suspended = 0;
release_console_sem();
}
@@ -912,11 +913,9 @@
void acquire_console_sem(void)
{
BUG_ON(in_interrupt());
- if (console_suspended) {
- down(&secondary_console_sem);
- return;
- }
down(&console_sem);
+ if (console_suspended)
+ return;
console_locked = 1;
console_may_schedule = 1;
}
@@ -926,6 +925,10 @@
{
if (down_trylock(&console_sem))
return -1;
+ if (console_suspended) {
+ up(&console_sem);
+ return -1;
+ }
console_locked = 1;
console_may_schedule = 0;
return 0;
@@ -979,7 +982,7 @@
unsigned wake_klogd = 0;
if (console_suspended) {
- up(&secondary_console_sem);
+ up(&console_sem);
return;
}
diff --git a/kernel/sched.c b/kernel/sched.c
index c1d0ed3..410eec4 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -6944,20 +6944,26 @@
static void rq_attach_root(struct rq *rq, struct root_domain *rd)
{
+ struct root_domain *old_rd = NULL;
unsigned long flags;
spin_lock_irqsave(&rq->lock, flags);
if (rq->rd) {
- struct root_domain *old_rd = rq->rd;
+ old_rd = rq->rd;
if (cpumask_test_cpu(rq->cpu, old_rd->online))
set_rq_offline(rq);
cpumask_clear_cpu(rq->cpu, old_rd->span);
- if (atomic_dec_and_test(&old_rd->refcount))
- free_rootdomain(old_rd);
+ /*
+ * If we dont want to free the old_rt yet then
+ * set old_rd to NULL to skip the freeing later
+ * in this function:
+ */
+ if (!atomic_dec_and_test(&old_rd->refcount))
+ old_rd = NULL;
}
atomic_inc(&rd->refcount);
@@ -6968,6 +6974,9 @@
set_rq_online(rq);
spin_unlock_irqrestore(&rq->lock, flags);
+
+ if (old_rd)
+ free_rootdomain(old_rd);
}
static int __init_refok init_rootdomain(struct root_domain *rd, bool bootmem)
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index e2a4ff6..34e707e 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -52,6 +52,7 @@
depends on HAVE_FUNCTION_TRACER
depends on DEBUG_KERNEL
select FRAME_POINTER
+ select KALLSYMS
select TRACING
select CONTEXT_SWITCH_TRACER
help
@@ -238,6 +239,7 @@
depends on DEBUG_KERNEL
select FUNCTION_TRACER
select STACKTRACE
+ select KALLSYMS
help
This special tracer records the maximum stack footprint of the
kernel and displays it in debugfs/tracing/stack_trace.
@@ -302,4 +304,27 @@
functioning properly. It will do tests on all the configured
tracers of ftrace.
+config MMIOTRACE
+ bool "Memory mapped IO tracing"
+ depends on HAVE_MMIOTRACE_SUPPORT && DEBUG_KERNEL && PCI
+ select TRACING
+ help
+ Mmiotrace traces Memory Mapped I/O access and is meant for
+ debugging and reverse engineering. It is called from the ioremap
+ implementation and works via page faults. Tracing is disabled by
+ default and can be enabled at run-time.
+
+ See Documentation/tracers/mmiotrace.txt.
+ If you are not helping to develop drivers, say N.
+
+config MMIOTRACE_TEST
+ tristate "Test module for mmiotrace"
+ depends on MMIOTRACE && m
+ help
+ This is a dumb module for testing mmiotrace. It is very dangerous
+ as it will write garbage to IO memory starting at a given address.
+ However, it should be safe to use on e.g. unused portion of VRAM.
+
+ Say N, unless you absolutely know what you are doing.
+
endmenu
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 9a236ff..fdf913d 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -2033,7 +2033,7 @@
static int start_graph_tracing(void)
{
struct ftrace_ret_stack **ret_stack_list;
- int ret;
+ int ret, cpu;
ret_stack_list = kmalloc(FTRACE_RETSTACK_ALLOC_SIZE *
sizeof(struct ftrace_ret_stack *),
@@ -2042,6 +2042,10 @@
if (!ret_stack_list)
return -ENOMEM;
+ /* The cpu_boot init_task->ret_stack will never be freed */
+ for_each_online_cpu(cpu)
+ ftrace_graph_init_task(idle_task(cpu));
+
do {
ret = alloc_retstack_tasklist(ret_stack_list);
} while (ret == -EAGAIN);
diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c
index fffcb06..80e503e 100644
--- a/kernel/trace/trace_mmiotrace.c
+++ b/kernel/trace/trace_mmiotrace.c
@@ -9,6 +9,7 @@
#include <linux/kernel.h>
#include <linux/mmiotrace.h>
#include <linux/pci.h>
+#include <asm/atomic.h>
#include "trace.h"
@@ -19,6 +20,7 @@
static struct trace_array *mmio_trace_array;
static bool overrun_detected;
static unsigned long prev_overruns;
+static atomic_t dropped_count;
static void mmio_reset_data(struct trace_array *tr)
{
@@ -121,11 +123,11 @@
static unsigned long count_overruns(struct trace_iterator *iter)
{
- unsigned long cnt = 0;
+ unsigned long cnt = atomic_xchg(&dropped_count, 0);
unsigned long over = ring_buffer_overruns(iter->tr->buffer);
if (over > prev_overruns)
- cnt = over - prev_overruns;
+ cnt += over - prev_overruns;
prev_overruns = over;
return cnt;
}
@@ -310,8 +312,10 @@
event = ring_buffer_lock_reserve(tr->buffer, sizeof(*entry),
&irq_flags);
- if (!event)
+ if (!event) {
+ atomic_inc(&dropped_count);
return;
+ }
entry = ring_buffer_event_data(event);
tracing_generic_entry_update(&entry->ent, 0, preempt_count());
entry->ent.type = TRACE_MMIO_RW;
@@ -338,8 +342,10 @@
event = ring_buffer_lock_reserve(tr->buffer, sizeof(*entry),
&irq_flags);
- if (!event)
+ if (!event) {
+ atomic_inc(&dropped_count);
return;
+ }
entry = ring_buffer_event_data(event);
tracing_generic_entry_update(&entry->ent, 0, preempt_count());
entry->ent.type = TRACE_MMIO_MAP;
diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c
index 88c8eb7..bc8e80a 100644
--- a/kernel/trace/trace_selftest.c
+++ b/kernel/trace/trace_selftest.c
@@ -23,10 +23,20 @@
{
struct ring_buffer_event *event;
struct trace_entry *entry;
+ unsigned int loops = 0;
while ((event = ring_buffer_consume(tr->buffer, cpu, NULL))) {
entry = ring_buffer_event_data(event);
+ /*
+ * The ring buffer is a size of trace_buf_size, if
+ * we loop more than the size, there's something wrong
+ * with the ring buffer.
+ */
+ if (loops++ > trace_buf_size) {
+ printk(KERN_CONT ".. bad ring buffer ");
+ goto failed;
+ }
if (!trace_valid_entry(entry)) {
printk(KERN_CONT ".. invalid entry %d ",
entry->type);
@@ -57,11 +67,20 @@
cnt = ring_buffer_entries(tr->buffer);
+ /*
+ * The trace_test_buffer_cpu runs a while loop to consume all data.
+ * If the calling tracer is broken, and is constantly filling
+ * the buffer, this will run forever, and hard lock the box.
+ * We disable the ring buffer while we do this test to prevent
+ * a hard lock up.
+ */
+ tracing_off();
for_each_possible_cpu(cpu) {
ret = trace_test_buffer_cpu(tr, cpu);
if (ret)
break;
}
+ tracing_on();
__raw_spin_unlock(&ftrace_max_lock);
local_irq_restore(flags);
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 29044f5..1bcf9cd 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -838,7 +838,7 @@
If unsure, say N.
-menuconfig BUILD_DOCSRC
+config BUILD_DOCSRC
bool "Build targets in Documentation/ tree"
depends on HEADERS_CHECK
help
diff --git a/mm/mlock.c b/mm/mlock.c
index 037161d..cbe9e05 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -660,7 +660,7 @@
return buffer;
}
-void free_locked_buffer(void *buffer, size_t size)
+void release_locked_buffer(void *buffer, size_t size)
{
unsigned long pgsz = PAGE_ALIGN(size) >> PAGE_SHIFT;
@@ -670,6 +670,11 @@
current->mm->locked_vm -= pgsz;
up_write(¤t->mm->mmap_sem);
+}
+
+void free_locked_buffer(void *buffer, size_t size)
+{
+ release_locked_buffer(buffer, size);
kfree(buffer);
}
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 3c84128..74dc57c 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -240,7 +240,7 @@
}
EXPORT_SYMBOL_GPL(bdi_writeout_inc);
-static inline void task_dirty_inc(struct task_struct *tsk)
+void task_dirty_inc(struct task_struct *tsk)
{
prop_inc_single(&vm_dirties, &tsk->dirties);
}
@@ -1230,6 +1230,7 @@
__inc_zone_page_state(page, NR_FILE_DIRTY);
__inc_bdi_stat(mapping->backing_dev_info,
BDI_RECLAIMABLE);
+ task_dirty_inc(current);
task_io_account_write(PAGE_CACHE_SIZE);
}
radix_tree_tag_set(&mapping->page_tree,
@@ -1262,7 +1263,7 @@
* If the mapping doesn't provide a set_page_dirty a_op, then
* just fall through and assume that it wants buffer_heads.
*/
-static int __set_page_dirty(struct page *page)
+int set_page_dirty(struct page *page)
{
struct address_space *mapping = page_mapping(page);
@@ -1280,14 +1281,6 @@
}
return 0;
}
-
-int set_page_dirty(struct page *page)
-{
- int ret = __set_page_dirty(page);
- if (ret)
- task_dirty_inc(current);
- return ret;
-}
EXPORT_SYMBOL(set_page_dirty);
/*
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 5675b30..5c44ed4 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2989,7 +2989,7 @@
* was used and there are no special requirements, this is a convenient
* alternative
*/
-int __meminit early_pfn_to_nid(unsigned long pfn)
+int __meminit __early_pfn_to_nid(unsigned long pfn)
{
int i;
@@ -3000,11 +3000,34 @@
if (start_pfn <= pfn && pfn < end_pfn)
return early_node_map[i].nid;
}
-
- return 0;
+ /* This is a memory hole */
+ return -1;
}
#endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */
+int __meminit early_pfn_to_nid(unsigned long pfn)
+{
+ int nid;
+
+ nid = __early_pfn_to_nid(pfn);
+ if (nid >= 0)
+ return nid;
+ /* just returns 0 */
+ return 0;
+}
+
+#ifdef CONFIG_NODES_SPAN_OTHER_NODES
+bool __meminit early_pfn_in_nid(unsigned long pfn, int node)
+{
+ int nid;
+
+ nid = __early_pfn_to_nid(pfn);
+ if (nid >= 0 && nid != node)
+ return false;
+ return true;
+}
+#endif
+
/* Basic iterator support to walk early_node_map[] */
#define for_each_active_range_index_in_nid(i, nid) \
for (i = first_active_region_index_in_nid(nid); i != -1; \
diff --git a/mm/page_io.c b/mm/page_io.c
index dc6ce0a..3023c47 100644
--- a/mm/page_io.c
+++ b/mm/page_io.c
@@ -111,7 +111,7 @@
goto out;
}
if (wbc->sync_mode == WB_SYNC_ALL)
- rw |= (1 << BIO_RW_SYNC);
+ rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG);
count_vm_event(PSWPOUT);
set_page_writeback(page);
unlock_page(page);
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 7e6304d..312fafe 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -635,7 +635,7 @@
if (!bdev) {
if (bdev_p)
- *bdev_p = sis->bdev;
+ *bdev_p = bdget(sis->bdev->bd_dev);
spin_unlock(&swap_lock);
return i;
@@ -647,7 +647,7 @@
struct swap_extent, list);
if (se->start_block == offset) {
if (bdev_p)
- *bdev_p = sis->bdev;
+ *bdev_p = bdget(sis->bdev->bd_dev);
spin_unlock(&swap_lock);
bdput(bdev);
diff --git a/mm/util.c b/mm/util.c
index cb00b74..37eaccd 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -129,6 +129,26 @@
}
EXPORT_SYMBOL(krealloc);
+/**
+ * kzfree - like kfree but zero memory
+ * @p: object to free memory of
+ *
+ * The memory of the object @p points to is zeroed before freed.
+ * If @p is %NULL, kzfree() does nothing.
+ */
+void kzfree(const void *p)
+{
+ size_t ks;
+ void *mem = (void *)p;
+
+ if (unlikely(ZERO_OR_NULL_PTR(mem)))
+ return;
+ ks = ksize(mem);
+ memset(mem, 0, ks);
+ kfree(mem);
+}
+EXPORT_SYMBOL(kzfree);
+
/*
* strndup_user - duplicate an existing string from user space
* @s: The string to duplicate
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 75f49d3..903cad4 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1012,6 +1012,8 @@
void unmap_kernel_range(unsigned long addr, unsigned long size)
{
unsigned long end = addr + size;
+
+ flush_cache_vunmap(addr, end);
vunmap_page_range(addr, end);
flush_tlb_kernel_range(addr, end);
}
@@ -1106,6 +1108,14 @@
}
EXPORT_SYMBOL_GPL(__get_vm_area);
+struct vm_struct *__get_vm_area_caller(unsigned long size, unsigned long flags,
+ unsigned long start, unsigned long end,
+ void *caller)
+{
+ return __get_vm_area_node(size, flags, start, end, -1, GFP_KERNEL,
+ caller);
+}
+
/**
* get_vm_area - reserve a contiguous kernel virtual area
* @size: size of the area
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 9a27c44..6177e3b 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2057,31 +2057,31 @@
int pass, struct scan_control *sc)
{
struct zone *zone;
- unsigned long nr_to_scan, ret = 0;
- enum lru_list l;
+ unsigned long ret = 0;
for_each_zone(zone) {
+ enum lru_list l;
if (!populated_zone(zone))
continue;
-
if (zone_is_all_unreclaimable(zone) && prio != DEF_PRIORITY)
continue;
for_each_evictable_lru(l) {
+ enum zone_stat_item ls = NR_LRU_BASE + l;
+ unsigned long lru_pages = zone_page_state(zone, ls);
+
/* For pass = 0, we don't shrink the active list */
- if (pass == 0 &&
- (l == LRU_ACTIVE || l == LRU_ACTIVE_FILE))
+ if (pass == 0 && (l == LRU_ACTIVE_ANON ||
+ l == LRU_ACTIVE_FILE))
continue;
- zone->lru[l].nr_scan +=
- (zone_page_state(zone, NR_LRU_BASE + l)
- >> prio) + 1;
+ zone->lru[l].nr_scan += (lru_pages >> prio) + 1;
if (zone->lru[l].nr_scan >= nr_pages || pass > 3) {
+ unsigned long nr_to_scan;
+
zone->lru[l].nr_scan = 0;
- nr_to_scan = min(nr_pages,
- zone_page_state(zone,
- NR_LRU_BASE + l));
+ nr_to_scan = min(nr_pages, lru_pages);
ret += shrink_list(l, nr_to_scan, zone,
sc, prio);
if (ret >= nr_pages)
@@ -2089,7 +2089,6 @@
}
}
}
-
return ret;
}
@@ -2112,7 +2111,6 @@
.may_swap = 0,
.swap_cluster_max = nr_pages,
.may_writepage = 1,
- .swappiness = vm_swappiness,
.isolate_pages = isolate_pages_global,
};
@@ -2146,10 +2144,8 @@
int prio;
/* Force reclaiming mapped pages in the passes #3 and #4 */
- if (pass > 2) {
+ if (pass > 2)
sc.may_swap = 1;
- sc.swappiness = 100;
- }
for (prio = DEF_PRIORITY; prio >= 0; prio--) {
unsigned long nr_to_scan = nr_pages - ret;
diff --git a/scripts/bootgraph.pl b/scripts/bootgraph.pl
index b024630..12caa82 100644
--- a/scripts/bootgraph.pl
+++ b/scripts/bootgraph.pl
@@ -51,7 +51,7 @@
while (<>) {
my $line = $_;
- if ($line =~ /([0-9\.]+)\] calling ([a-zA-Z0-9\_]+)\+/) {
+ if ($line =~ /([0-9\.]+)\] calling ([a-zA-Z0-9\_\.]+)\+/) {
my $func = $2;
if ($done == 0) {
$start{$func} = $1;
@@ -87,7 +87,7 @@
$count = $count + 1;
}
- if ($line =~ /([0-9\.]+)\] initcall ([a-zA-Z0-9\_]+)\+.*returned/) {
+ if ($line =~ /([0-9\.]+)\] initcall ([a-zA-Z0-9\_\.]+)\+.*returned/) {
if ($done == 0) {
$end{$2} = $1;
$maxtime = $1;
diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl
index d40449c..528492b 100644
--- a/scripts/markup_oops.pl
+++ b/scripts/markup_oops.pl
@@ -1,4 +1,4 @@
-#!/usr/bin/perl -w
+#!/usr/bin/perl
use File::Basename;
@@ -29,27 +29,151 @@
my $target = "0";
my $function;
my $module = "";
-my $func_offset;
+my $func_offset = 0;
my $vmaoffset = 0;
+my %regs;
+
+
+sub parse_x86_regs
+{
+ my ($line) = @_;
+ if ($line =~ /EAX: ([0-9a-f]+) EBX: ([0-9a-f]+) ECX: ([0-9a-f]+) EDX: ([0-9a-f]+)/) {
+ $regs{"%eax"} = $1;
+ $regs{"%ebx"} = $2;
+ $regs{"%ecx"} = $3;
+ $regs{"%edx"} = $4;
+ }
+ if ($line =~ /ESI: ([0-9a-f]+) EDI: ([0-9a-f]+) EBP: ([0-9a-f]+) ESP: ([0-9a-f]+)/) {
+ $regs{"%esi"} = $1;
+ $regs{"%edi"} = $2;
+ $regs{"%esp"} = $4;
+ }
+ if ($line =~ /RAX: ([0-9a-f]+) RBX: ([0-9a-f]+) RCX: ([0-9a-f]+)/) {
+ $regs{"%eax"} = $1;
+ $regs{"%ebx"} = $2;
+ $regs{"%ecx"} = $3;
+ }
+ if ($line =~ /RDX: ([0-9a-f]+) RSI: ([0-9a-f]+) RDI: ([0-9a-f]+)/) {
+ $regs{"%edx"} = $1;
+ $regs{"%esi"} = $2;
+ $regs{"%edi"} = $3;
+ }
+ if ($line =~ /RBP: ([0-9a-f]+) R08: ([0-9a-f]+) R09: ([0-9a-f]+)/) {
+ $regs{"%r08"} = $2;
+ $regs{"%r09"} = $3;
+ }
+ if ($line =~ /R10: ([0-9a-f]+) R11: ([0-9a-f]+) R12: ([0-9a-f]+)/) {
+ $regs{"%r10"} = $1;
+ $regs{"%r11"} = $2;
+ $regs{"%r12"} = $3;
+ }
+ if ($line =~ /R13: ([0-9a-f]+) R14: ([0-9a-f]+) R15: ([0-9a-f]+)/) {
+ $regs{"%r13"} = $1;
+ $regs{"%r14"} = $2;
+ $regs{"%r15"} = $3;
+ }
+}
+
+sub reg_name
+{
+ my ($reg) = @_;
+ $reg =~ s/r(.)x/e\1x/;
+ $reg =~ s/r(.)i/e\1i/;
+ $reg =~ s/r(.)p/e\1p/;
+ return $reg;
+}
+
+sub process_x86_regs
+{
+ my ($line, $cntr) = @_;
+ my $str = "";
+ if (length($line) < 40) {
+ return ""; # not an asm istruction
+ }
+
+ # find the arguments to the instruction
+ if ($line =~ /([0-9a-zA-Z\,\%\(\)\-\+]+)$/) {
+ $lastword = $1;
+ } else {
+ return "";
+ }
+
+ # we need to find the registers that get clobbered,
+ # since their value is no longer relevant for previous
+ # instructions in the stream.
+
+ $clobber = $lastword;
+ # first, remove all memory operands, they're read only
+ $clobber =~ s/\([a-z0-9\%\,]+\)//g;
+ # then, remove everything before the comma, thats the read part
+ $clobber =~ s/.*\,//g;
+
+ # if this is the instruction that faulted, we haven't actually done
+ # the write yet... nothing is clobbered.
+ if ($cntr == 0) {
+ $clobber = "";
+ }
+
+ foreach $reg (keys(%regs)) {
+ my $clobberprime = reg_name($clobber);
+ my $lastwordprime = reg_name($lastword);
+ my $val = $regs{$reg};
+ if ($val =~ /^[0]+$/) {
+ $val = "0";
+ } else {
+ $val =~ s/^0*//;
+ }
+
+ # first check if we're clobbering this register; if we do
+ # we print it with a =>, and then delete its value
+ if ($clobber =~ /$reg/ || $clobberprime =~ /$reg/) {
+ if (length($val) > 0) {
+ $str = $str . " $reg => $val ";
+ }
+ $regs{$reg} = "";
+ $val = "";
+ }
+ # now check if we're reading this register
+ if ($lastword =~ /$reg/ || $lastwordprime =~ /$reg/) {
+ if (length($val) > 0) {
+ $str = $str . " $reg = $val ";
+ }
+ }
+ }
+ return $str;
+}
+
+# parse the oops
while (<STDIN>) {
my $line = $_;
if ($line =~ /EIP: 0060:\[\<([a-z0-9]+)\>\]/) {
$target = $1;
}
+ if ($line =~ /RIP: 0010:\[\<([a-z0-9]+)\>\]/) {
+ $target = $1;
+ }
if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) {
$function = $1;
$func_offset = $2;
}
+ if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) {
+ $function = $1;
+ $func_offset = $2;
+ }
# check if it's a module
if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]+\W\[([a-zA-Z0-9\_\-]+)\]/) {
$module = $3;
}
+ if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]+\W\[([a-zA-Z0-9\_\-]+)\]/) {
+ $module = $3;
+ }
+ parse_x86_regs($line);
}
my $decodestart = hex($target) - hex($func_offset);
-my $decodestop = $decodestart + 8192;
+my $decodestop = hex($target) + 8192;
if ($target eq "0") {
print "No oops found!\n";
print "Usage: \n";
@@ -84,6 +208,7 @@
my $state = 0;
my $center = 0;
my @lines;
+my @reglines;
sub InRange {
my ($address, $target) = @_;
@@ -188,16 +313,36 @@
my $i;
-my $fulltext = "";
-$i = $start;
-while ($i < $finish) {
- if ($i == $center) {
- $fulltext = $fulltext . "*$lines[$i] <----- faulting instruction\n";
- } else {
- $fulltext = $fulltext . " $lines[$i]\n";
- }
- $i = $i +1;
+
+# start annotating the registers in the asm.
+# this goes from the oopsing point back, so that the annotator
+# can track (opportunistically) which registers got written and
+# whos value no longer is relevant.
+
+$i = $center;
+while ($i >= $start) {
+ $reglines[$i] = process_x86_regs($lines[$i], $center - $i);
+ $i = $i - 1;
}
-print $fulltext;
+$i = $start;
+while ($i < $finish) {
+ my $line;
+ if ($i == $center) {
+ $line = "*$lines[$i] ";
+ } else {
+ $line = " $lines[$i] ";
+ }
+ print $line;
+ if (defined($reglines[$i]) && length($reglines[$i]) > 0) {
+ my $c = 60 - length($line);
+ while ($c > 0) { print " "; $c = $c - 1; };
+ print "| $reglines[$i]";
+ }
+ if ($i == $center) {
+ print "<--- faulting instruction";
+ }
+ print "\n";
+ $i = $i +1;
+}
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 491b8b1..4eea60b 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -210,6 +210,7 @@
static int do_hid_entry(const char *filename,
struct hid_device_id *id, char *alias)
{
+ id->bus = TO_NATIVE(id->bus);
id->vendor = TO_NATIVE(id->vendor);
id->product = TO_NATIVE(id->product);
diff --git a/scripts/package/mkspec b/scripts/package/mkspec
index 2500886..ee448cd 100755
--- a/scripts/package/mkspec
+++ b/scripts/package/mkspec
@@ -86,6 +86,14 @@
echo 'cp System.map $RPM_BUILD_ROOT'"/boot/System.map-$KERNELRELEASE"
echo 'cp .config $RPM_BUILD_ROOT'"/boot/config-$KERNELRELEASE"
+
+echo "%ifnarch ppc64"
+echo 'cp vmlinux vmlinux.orig'
+echo 'bzip2 -9 vmlinux'
+echo 'mv vmlinux.bz2 $RPM_BUILD_ROOT'"/boot/vmlinux-$KERNELRELEASE.bz2"
+echo 'mv vmlinux.orig vmlinux'
+echo "%endif"
+
echo ""
echo "%clean"
echo '#echo -rf $RPM_BUILD_ROOT'
diff --git a/scripts/setlocalversion b/scripts/setlocalversion
index f6946cf..f1c4b35 100755
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -58,14 +58,7 @@
# Check for svn and a svn repo.
if rev=`svn info 2>/dev/null | grep '^Last Changed Rev'`; then
rev=`echo $rev | awk '{print $NF}'`
- changes=`svn status 2>/dev/null | grep '^[AMD]' | wc -l`
-
- # Are there uncommitted changes?
- if [ $changes != 0 ]; then
- printf -- '-svn%s%s' "$rev" -dirty
- else
- printf -- '-svn%s' "$rev"
- fi
+ printf -- '-svn%s' "$rev"
# All done with svn
exit
diff --git a/scripts/tags.sh b/scripts/tags.sh
index fdbe78b..5bd8b10 100755
--- a/scripts/tags.sh
+++ b/scripts/tags.sh
@@ -76,7 +76,10 @@
all_kconfigs()
{
- find_sources $ALLSOURCE_ARCHS 'Kconfig*'
+ for arch in $ALLSOURCE_ARCHS; do
+ find_sources $arch 'Kconfig*'
+ done
+ find_other_sources 'Kconfig*'
}
all_defconfigs()
@@ -99,7 +102,8 @@
-I ____cacheline_internodealigned_in_smp \
-I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \
--extra=+f --c-kinds=+px \
- --regex-asm='/^ENTRY\(([^)]*)\).*/\1/'
+ --regex-asm='/^ENTRY\(([^)]*)\).*/\1/' \
+ --regex-c='/^SYSCALL_DEFINE[[:digit:]]?\(([^,)]*).*/sys_\1/'
all_kconfigs | xargs $1 -a \
--langdef=kconfig --language-force=kconfig \
@@ -117,7 +121,9 @@
emacs()
{
- all_sources | xargs $1 -a
+ all_sources | xargs $1 -a \
+ --regex='/^ENTRY(\([^)]*\)).*/\1/' \
+ --regex='/^SYSCALL_DEFINE[0-9]?(\([^,)]*\).*/sys_\1/'
all_kconfigs | xargs $1 -a \
--regex='/^[ \t]*\(\(menu\)*config\)[ \t]+\([a-zA-Z0-9_]+\)/\3/'
diff --git a/sound/core/jack.c b/sound/core/jack.c
index dd4a12d..077a852 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -47,7 +47,7 @@
int err;
snprintf(jack->name, sizeof(jack->name), "%s %s",
- card->longname, jack->id);
+ card->shortname, jack->id);
jack->input_dev->name = jack->name;
/* Default to the sound card device. */
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 11e791b..c8d9178 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1947,16 +1947,13 @@
return 0;
}
-static int azx_resume_early(struct pci_dev *pci)
-{
- return pci_restore_state(pci);
-}
-
static int azx_resume(struct pci_dev *pci)
{
struct snd_card *card = pci_get_drvdata(pci);
struct azx *chip = card->private_data;
+ pci_set_power_state(pci, PCI_D0);
+ pci_restore_state(pci);
if (pci_enable_device(pci) < 0) {
printk(KERN_ERR "hda-intel: pci_enable_device failed, "
"disabling device\n");
@@ -2468,7 +2465,6 @@
.remove = __devexit_p(azx_remove),
#ifdef CONFIG_PM
.suspend = azx_suspend,
- .resume_early = azx_resume_early,
.resume = azx_resume,
#endif
};
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index 18c7c91..6c870c1 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -26,7 +26,7 @@
* SPI 0 -> 1st PCM1796 (front)
* SPI 1 -> 2nd PCM1796 (surround)
* SPI 2 -> 3rd PCM1796 (center/LFE)
- * SPI 4 -> 4th PCM1796 (back) and EEPROM self-destruct (do not use!)
+ * SPI 4 -> 4th PCM1796 (back)
*
* GPIO 2 -> M0 of CS5381
* GPIO 3 -> M1 of CS5381
@@ -207,12 +207,6 @@
static inline void pcm1796_write_spi(struct oxygen *chip, unsigned int codec,
u8 reg, u8 value)
{
- /*
- * We don't want to do writes on SPI 4 because the EEPROM, which shares
- * the same pin, might get confused and broken. We'd better take care
- * that the driver works with the default register values ...
- */
-#if 0
/* maps ALSA channel pair number to SPI output */
static const u8 codec_map[4] = {
0, 1, 2, 4
@@ -223,7 +217,6 @@
(codec_map[codec] << OXYGEN_SPI_CODEC_SHIFT) |
OXYGEN_SPI_CEN_LATCH_CLOCK_HI,
(reg << 8) | value);
-#endif
}
static inline void pcm1796_write_i2c(struct oxygen *chip, unsigned int codec,
@@ -757,9 +750,6 @@
static int xonar_d2_control_filter(struct snd_kcontrol_new *template)
{
- if (!strncmp(template->name, "Master Playback ", 16))
- /* disable volume/mute because they would require SPI writes */
- return 1;
if (!strncmp(template->name, "CD Capture ", 11))
/* CD in is actually connected to the video in pin */
template->private_value ^= AC97_CD ^ AC97_VIDEO;
@@ -850,8 +840,9 @@
.dac_volume_min = 0x0f,
.dac_volume_max = 0xff,
.misc_flags = OXYGEN_MISC_MIDI,
- .function_flags = OXYGEN_FUNCTION_SPI,
- .dac_i2s_format = OXYGEN_I2S_FORMAT_I2S,
+ .function_flags = OXYGEN_FUNCTION_SPI |
+ OXYGEN_FUNCTION_ENABLE_SPI_4_5,
+ .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
};
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index 2ab8312..19e3745 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -2524,7 +2524,6 @@
* build the rate table and bitmap flags
*/
int r, idx;
- unsigned int nonzero_rates = 0;
fp->rate_table = kmalloc(sizeof(int) * nr_rates, GFP_KERNEL);
if (fp->rate_table == NULL) {
@@ -2532,24 +2531,27 @@
return -1;
}
- fp->nr_rates = nr_rates;
- fp->rate_min = fp->rate_max = combine_triple(&fmt[8]);
+ fp->nr_rates = 0;
+ fp->rate_min = fp->rate_max = 0;
for (r = 0, idx = offset + 1; r < nr_rates; r++, idx += 3) {
unsigned int rate = combine_triple(&fmt[idx]);
+ if (!rate)
+ continue;
/* C-Media CM6501 mislabels its 96 kHz altsetting */
if (rate == 48000 && nr_rates == 1 &&
- chip->usb_id == USB_ID(0x0d8c, 0x0201) &&
+ (chip->usb_id == USB_ID(0x0d8c, 0x0201) ||
+ chip->usb_id == USB_ID(0x0d8c, 0x0102)) &&
fp->altsetting == 5 && fp->maxpacksize == 392)
rate = 96000;
- fp->rate_table[r] = rate;
- nonzero_rates |= rate;
- if (rate < fp->rate_min)
+ fp->rate_table[fp->nr_rates] = rate;
+ if (!fp->rate_min || rate < fp->rate_min)
fp->rate_min = rate;
- else if (rate > fp->rate_max)
+ if (!fp->rate_max || rate > fp->rate_max)
fp->rate_max = rate;
fp->rates |= snd_pcm_rate_to_rate_bit(rate);
+ fp->nr_rates++;
}
- if (!nonzero_rates) {
+ if (!fp->nr_rates) {
hwc_debug("All rates were zero. Skipping format!\n");
return -1;
}
diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c
index 320641a..26bad37 100644
--- a/sound/usb/usbmidi.c
+++ b/sound/usb/usbmidi.c
@@ -1625,6 +1625,7 @@
}
ep_info.out_ep = get_endpoint(hostif, 2)->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+ ep_info.out_interval = 0;
ep_info.out_cables = endpoint->out_cables & 0x5555;
err = snd_usbmidi_out_endpoint_create(umidi, &ep_info, &umidi->endpoints[0]);
if (err < 0)
diff --git a/virt/kvm/iommu.c b/virt/kvm/iommu.c
index e9693a2..4c40375 100644
--- a/virt/kvm/iommu.c
+++ b/virt/kvm/iommu.c
@@ -73,14 +73,13 @@
{
int i, r = 0;
- down_read(&kvm->slots_lock);
for (i = 0; i < kvm->nmemslots; i++) {
r = kvm_iommu_map_pages(kvm, kvm->memslots[i].base_gfn,
kvm->memslots[i].npages);
if (r)
break;
}
- up_read(&kvm->slots_lock);
+
return r;
}
@@ -190,12 +189,11 @@
static int kvm_iommu_unmap_memslots(struct kvm *kvm)
{
int i;
- down_read(&kvm->slots_lock);
+
for (i = 0; i < kvm->nmemslots; i++) {
kvm_iommu_put_pages(kvm, kvm->memslots[i].base_gfn,
kvm->memslots[i].npages);
}
- up_read(&kvm->slots_lock);
return 0;
}
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 3a5a082..29a667c 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -173,7 +173,6 @@
assigned_dev->host_irq_disabled = false;
}
mutex_unlock(&assigned_dev->kvm->lock);
- kvm_put_kvm(assigned_dev->kvm);
}
static irqreturn_t kvm_assigned_dev_intr(int irq, void *dev_id)
@@ -181,8 +180,6 @@
struct kvm_assigned_dev_kernel *assigned_dev =
(struct kvm_assigned_dev_kernel *) dev_id;
- kvm_get_kvm(assigned_dev->kvm);
-
schedule_work(&assigned_dev->interrupt_work);
disable_irq_nosync(irq);
@@ -213,6 +210,7 @@
}
}
+/* The function implicit hold kvm->lock mutex due to cancel_work_sync() */
static void kvm_free_assigned_irq(struct kvm *kvm,
struct kvm_assigned_dev_kernel *assigned_dev)
{
@@ -228,11 +226,24 @@
if (!assigned_dev->irq_requested_type)
return;
- if (cancel_work_sync(&assigned_dev->interrupt_work))
- /* We had pending work. That means we will have to take
- * care of kvm_put_kvm.
- */
- kvm_put_kvm(kvm);
+ /*
+ * In kvm_free_device_irq, cancel_work_sync return true if:
+ * 1. work is scheduled, and then cancelled.
+ * 2. work callback is executed.
+ *
+ * The first one ensured that the irq is disabled and no more events
+ * would happen. But for the second one, the irq may be enabled (e.g.
+ * for MSI). So we disable irq here to prevent further events.
+ *
+ * Notice this maybe result in nested disable if the interrupt type is
+ * INTx, but it's OK for we are going to free it.
+ *
+ * If this function is a part of VM destroy, please ensure that till
+ * now, the kvm state is still legal for probably we also have to wait
+ * interrupt_work done.
+ */
+ disable_irq_nosync(assigned_dev->host_irq);
+ cancel_work_sync(&assigned_dev->interrupt_work);
free_irq(assigned_dev->host_irq, (void *)assigned_dev);
@@ -285,8 +296,8 @@
if (irqchip_in_kernel(kvm)) {
if (!msi2intx &&
- adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI) {
- free_irq(adev->host_irq, (void *)kvm);
+ (adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI)) {
+ free_irq(adev->host_irq, (void *)adev);
pci_disable_msi(adev->dev);
}
@@ -455,6 +466,7 @@
struct kvm_assigned_dev_kernel *match;
struct pci_dev *dev;
+ down_read(&kvm->slots_lock);
mutex_lock(&kvm->lock);
match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
@@ -516,6 +528,7 @@
out:
mutex_unlock(&kvm->lock);
+ up_read(&kvm->slots_lock);
return r;
out_list_del:
list_del(&match->list);
@@ -527,6 +540,7 @@
out_free:
kfree(match);
mutex_unlock(&kvm->lock);
+ up_read(&kvm->slots_lock);
return r;
}
#endif
@@ -789,11 +803,19 @@
return young;
}
+static void kvm_mmu_notifier_release(struct mmu_notifier *mn,
+ struct mm_struct *mm)
+{
+ struct kvm *kvm = mmu_notifier_to_kvm(mn);
+ kvm_arch_flush_shadow(kvm);
+}
+
static const struct mmu_notifier_ops kvm_mmu_notifier_ops = {
.invalidate_page = kvm_mmu_notifier_invalidate_page,
.invalidate_range_start = kvm_mmu_notifier_invalidate_range_start,
.invalidate_range_end = kvm_mmu_notifier_invalidate_range_end,
.clear_flush_young = kvm_mmu_notifier_clear_flush_young,
+ .release = kvm_mmu_notifier_release,
};
#endif /* CONFIG_MMU_NOTIFIER && KVM_ARCH_WANT_MMU_NOTIFIER */
@@ -883,6 +905,7 @@
{
struct mm_struct *mm = kvm->mm;
+ kvm_arch_sync_events(kvm);
spin_lock(&kvm_lock);
list_del(&kvm->vm_list);
spin_unlock(&kvm_lock);