diff --git a/drivers/leds/leds-pm8xxx.c b/drivers/leds/leds-pm8xxx.c
index c3a5564..aef6295 100644
--- a/drivers/leds/leds-pm8xxx.c
+++ b/drivers/leds/leds-pm8xxx.c
@@ -133,6 +133,11 @@
 			_rgb_led_blue << PM8XXX_ID_RGB_LED_BLUE, \
 	}
 
+#define PM8XXX_PWM_CURRENT_4MA		4
+#define PM8XXX_PWM_CURRENT_8MA		8
+#define PM8XXX_PWM_CURRENT_12MA		12
+
+
 /**
  * supported_leds - leds supported for each PMIC version
  * @version - version of PMIC
@@ -795,7 +800,7 @@
 
 static int pm8xxx_led_pwm_configure(struct pm8xxx_led_data *led)
 {
-	int start_idx, idx_len, duty_us, rc;
+	int start_idx, idx_len, duty_us, rc, flags;
 
 	led->pwm_dev = pwm_request(led->pwm_channel,
 					led->cdev.name);
@@ -808,6 +813,22 @@
 		return -ENODEV;
 	}
 
+	flags = PM8XXX_LED_PWM_FLAGS;
+	switch (led->max_current) {
+	case PM8XXX_PWM_CURRENT_4MA:
+		flags |= PM_PWM_BANK_LO;
+		break;
+	case PM8XXX_PWM_CURRENT_8MA:
+		flags |= PM_PWM_BANK_HI;
+		break;
+	case PM8XXX_PWM_CURRENT_12MA:
+		flags |= (PM_PWM_BANK_LO | PM_PWM_BANK_HI);
+		break;
+	default:
+		flags |= (PM_PWM_BANK_LO | PM_PWM_BANK_HI);
+		break;
+	}
+
 	if (led->pwm_duty_cycles != NULL) {
 		start_idx = led->pwm_duty_cycles->start_idx;
 		idx_len = led->pwm_duty_cycles->num_duty_pcts;
@@ -825,7 +846,7 @@
 				led->pwm_duty_cycles->duty_pcts,
 				led->pwm_duty_cycles->duty_ms,
 				start_idx, idx_len, 0, 0,
-				PM8XXX_LED_PWM_FLAGS);
+				flags);
 	} else {
 		duty_us = led->pwm_period_us;
 		rc = pwm_config(led->pwm_dev, duty_us, led->pwm_period_us);
diff --git a/drivers/mfd/pm8xxx-pwm.c b/drivers/mfd/pm8xxx-pwm.c
index caaba81..0388484 100644
--- a/drivers/mfd/pm8xxx-pwm.c
+++ b/drivers/mfd/pm8xxx-pwm.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -58,10 +58,11 @@
 #define PM8XXX_PWM_DISABLE		0x3F
 
 /* PM8XXX LPG PWM */
+#define SSBI_REG_ADDR_LPG_BANK_LOW_EN	0x130
 #define SSBI_REG_ADDR_LPG_CTL_BASE	0x13C
 #define SSBI_REG_ADDR_LPG_CTL(n)	(SSBI_REG_ADDR_LPG_CTL_BASE + (n))
 #define SSBI_REG_ADDR_LPG_BANK_SEL	0x143
-#define SSBI_REG_ADDR_LPG_BANK_EN	0x144
+#define SSBI_REG_ADDR_LPG_BANK_HIGH_EN	0x144
 #define SSBI_REG_ADDR_LPG_LUT_CFG0	0x145
 #define SSBI_REG_ADDR_LPG_LUT_CFG1	0x146
 #define SSBI_REG_ADDR_LPG_TEST		0x147
@@ -206,13 +207,15 @@
 	struct pm8xxx_pwm_chip	*chip;
 	int			bypass_lut;
 	int			dtest_mode_supported;
+	int			banks;
 };
 
 struct pm8xxx_pwm_chip {
 	struct pwm_device		*pwm_dev;
 	u8				pwm_channels;
 	u8				pwm_total_pre_divs;
-	u8				bank_mask;
+	u8				lo_bank_mask;
+	u8				hi_bank_mask;
 	struct mutex			pwm_mutex;
 	struct device			*dev;
 	bool				is_lpg_supported;
@@ -259,18 +262,37 @@
 
 	chip = pwm->chip;
 
-	if (enable)
-		reg = chip->bank_mask | (1 << pwm->pwm_id);
-	else
-		reg = chip->bank_mask & ~(1 << pwm->pwm_id);
+	if (pwm->banks & PM_PWM_BANK_LO) {
+		if (enable)
+			reg = chip->lo_bank_mask | (1 << pwm->pwm_id);
+		else
+			reg = chip->lo_bank_mask & ~(1 << pwm->pwm_id);
 
-	rc = pm8xxx_writeb(chip->dev->parent, SSBI_REG_ADDR_LPG_BANK_EN, reg);
-	if (rc) {
-		pr_err("pm8xxx_writeb(): rc=%d (Enable LPG Bank)\n", rc);
-		return rc;
+		rc = pm8xxx_writeb(chip->dev->parent,
+				SSBI_REG_ADDR_LPG_BANK_LOW_EN, reg);
+		if (rc) {
+			pr_err("pm8xxx_writeb(): Enable Bank Low =%d\n", rc);
+			return rc;
+		}
+
+		chip->lo_bank_mask = reg;
 	}
-	chip->bank_mask = reg;
 
+	if (pwm->banks & PM_PWM_BANK_HI) {
+		if (enable)
+			reg = chip->hi_bank_mask | (1 << pwm->pwm_id);
+		else
+			reg = chip->hi_bank_mask & ~(1 << pwm->pwm_id);
+
+		rc = pm8xxx_writeb(chip->dev->parent,
+				SSBI_REG_ADDR_LPG_BANK_HIGH_EN, reg);
+		if (rc) {
+			pr_err("pm8xxx_writeb(): Enable Bank High =%d\n", rc);
+			return rc;
+		}
+
+		chip->hi_bank_mask = reg;
+	}
 	return 0;
 }
 
@@ -1010,6 +1032,16 @@
 	period = &pwm->period;
 	mutex_lock(&pwm->chip->pwm_mutex);
 
+	if (flags & PM_PWM_BANK_HI)
+		pwm->banks = PM_PWM_BANK_HI;
+
+	if (flags & PM_PWM_BANK_LO)
+		pwm->banks |= PM_PWM_BANK_LO;
+
+	/*Enable both banks if banks information is not shared.*/
+	if (!pwm->banks)
+		pwm->banks |= (PM_PWM_BANK_LO | PM_PWM_BANK_HI);
+
 	if (!pwm->in_use) {
 		pr_err("pwm_id: %d: stale handle?\n", pwm->pwm_id);
 		rc = -EINVAL;
diff --git a/include/linux/mfd/pm8xxx/pwm.h b/include/linux/mfd/pm8xxx/pwm.h
index 6d95e3a..47ebe06 100644
--- a/include/linux/mfd/pm8xxx/pwm.h
+++ b/include/linux/mfd/pm8xxx/pwm.h
@@ -1,4 +1,4 @@
-/* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -32,6 +32,9 @@
 
 #define PM_PWM_LUT_NO_TABLE	0x100
 
+#define PM_PWM_BANK_LO		0x1000
+#define PM_PWM_BANK_HI		0x2000
+
 /**
  * PWM frequency/period control
  *