arch/arm/mach-msm/board-8064-gpu.c

/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */

#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/msm_kgsl.h>
#include <mach/msm_bus_board.h>
#include <mach/board.h>

#include "devices.h"
#include "board-8064.h"

#ifdef CONFIG_MSM_BUS_SCALING
static struct msm_bus_vectors grp3d_init_vectors[] = {
	{
		.src = MSM_BUS_MASTER_GRAPHICS_3D,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab = 0,
		.ib = 0,
	},
	{
		.src = MSM_BUS_MASTER_GRAPHICS_3D_PORT1,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab = 0,
		.ib = 0,
	},
};

static struct msm_bus_vectors grp3d_low_vectors[] = {
	{
		.src = MSM_BUS_MASTER_GRAPHICS_3D,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab = 0,
		.ib = KGSL_CONVERT_TO_MBPS(2000),
	},
	{
		.src = MSM_BUS_MASTER_GRAPHICS_3D_PORT1,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab = 0,
		.ib = KGSL_CONVERT_TO_MBPS(2000),
	},
};

static struct msm_bus_vectors grp3d_nominal_high_vectors[] = {
	{
		.src = MSM_BUS_MASTER_GRAPHICS_3D,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab = 0,
		.ib = KGSL_CONVERT_TO_MBPS(3200),
	},
	{
		.src = MSM_BUS_MASTER_GRAPHICS_3D_PORT1,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab = 0,
		.ib = KGSL_CONVERT_TO_MBPS(3200),
	},
};

static struct msm_bus_vectors grp3d_max_vectors[] = {
	{
		.src = MSM_BUS_MASTER_GRAPHICS_3D,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab = 0,
		.ib = KGSL_CONVERT_TO_MBPS(4264),
	},
	{
		.src = MSM_BUS_MASTER_GRAPHICS_3D_PORT1,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab = 0,
		.ib = KGSL_CONVERT_TO_MBPS(4264),
	},
};

static struct msm_bus_paths grp3d_bus_scale_usecases[] = {
	{
		ARRAY_SIZE(grp3d_init_vectors),
		grp3d_init_vectors,
	},
	{
		ARRAY_SIZE(grp3d_low_vectors),
		grp3d_low_vectors,
	},
	{
		ARRAY_SIZE(grp3d_nominal_high_vectors),
		grp3d_nominal_high_vectors,
	},
	{
		ARRAY_SIZE(grp3d_max_vectors),
		grp3d_max_vectors,
	},
};

static struct msm_bus_scale_pdata grp3d_bus_scale_pdata = {
	grp3d_bus_scale_usecases,
	ARRAY_SIZE(grp3d_bus_scale_usecases),
	.name = "grp3d",
};
#endif

static struct resource kgsl_3d0_resources[] = {
	{
		.name = KGSL_3D0_REG_MEMORY,
		.start = 0x04300000, /* GFX3D address */
		.end = 0x0431ffff,
		.flags = IORESOURCE_MEM,
	},
	{
		.name = KGSL_3D0_IRQ,
		.start = GFX3D_IRQ,
		.end = GFX3D_IRQ,
		.flags = IORESOURCE_IRQ,
	},
};

static const char *kgsl_3d0_iommu0_ctx_names[] = {
	"gfx3d_user",
	/* priv_ctx goes here */
};

static const char *kgsl_3d0_iommu1_ctx_names[] = {
	"gfx3d1_user",
	/* priv_ctx goes here */
};

static struct kgsl_device_iommu_data kgsl_3d0_iommu_data[] = {
	{
		.iommu_ctx_names = kgsl_3d0_iommu0_ctx_names,
		.iommu_ctx_count = ARRAY_SIZE(kgsl_3d0_iommu0_ctx_names),
		.physstart = 0x07C00000,
		.physend = 0x07C00000 + SZ_1M - 1,
	},
	{
		.iommu_ctx_names = kgsl_3d0_iommu1_ctx_names,
		.iommu_ctx_count = ARRAY_SIZE(kgsl_3d0_iommu1_ctx_names),
		.physstart = 0x07D00000,
		.physend = 0x07D00000 + SZ_1M - 1,
	},
};

static struct kgsl_device_platform_data kgsl_3d0_pdata = {
	.pwrlevel = {
		{
			.gpu_freq = 400000000,
			.bus_freq = 3,
			.io_fraction = 0,
		},
		{
			.gpu_freq = 320000000,
			.bus_freq = 2,
			.io_fraction = 33,
		},
		{
			.gpu_freq = 1920000000,
			.bus_freq = 1,
			.io_fraction = 100,
		},
		{
			.gpu_freq = 27000000,
			.bus_freq = 0,
		},
	},
	.init_level = 0,
	.num_levels = 4,
	.set_grp_async = NULL,
	.idle_timeout = HZ/20,
	.nap_allowed = true,
	.clk_map = KGSL_CLK_CORE | KGSL_CLK_IFACE | KGSL_CLK_MEM_IFACE,
#ifdef CONFIG_MSM_BUS_SCALING
	.bus_scale_table = &grp3d_bus_scale_pdata,
#endif
	.iommu_data = kgsl_3d0_iommu_data,
	.iommu_count = ARRAY_SIZE(kgsl_3d0_iommu_data),
};

struct platform_device device_kgsl_3d0 = {
	.name = "kgsl-3d0",
	.id = 0,
	.num_resources = ARRAY_SIZE(kgsl_3d0_resources),
	.resource = kgsl_3d0_resources,
	.dev = {
		.platform_data = &kgsl_3d0_pdata,
	},
};

void __init apq8064_init_gpu(void)
{
	platform_device_register(&device_kgsl_3d0);
}