blob: e76941db231214f405e6251c7d0918ceebaeb208 [file] [log] [blame]
/*
*
* BRIEF MODULE DESCRIPTION
* Include file for Alchemy Semiconductor's Au1k CPU.
*
* Copyright 2000-2001, 2006-2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* some definitions add by takuzo@sm.sony.co.jp and sato@sm.sony.co.jp
*/
#ifndef _AU1000_H_
#define _AU1000_H_
#ifndef _LANGUAGE_ASSEMBLY
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/io.h>
#include <linux/irq.h>
/* cpu pipeline flush */
void static inline au_sync(void)
{
__asm__ volatile ("sync");
}
void static inline au_sync_udelay(int us)
{
__asm__ volatile ("sync");
udelay(us);
}
void static inline au_sync_delay(int ms)
{
__asm__ volatile ("sync");
mdelay(ms);
}
void static inline au_writeb(u8 val, unsigned long reg)
{
*(volatile u8 *)reg = val;
}
void static inline au_writew(u16 val, unsigned long reg)
{
*(volatile u16 *)reg = val;
}
void static inline au_writel(u32 val, unsigned long reg)
{
*(volatile u32 *)reg = val;
}
static inline u8 au_readb(unsigned long reg)
{
return *(volatile u8 *)reg;
}
static inline u16 au_readw(unsigned long reg)
{
return *(volatile u16 *)reg;
}
static inline u32 au_readl(unsigned long reg)
{
return *(volatile u32 *)reg;
}
/* Early Au1000 have a write-only SYS_CPUPLL register. */
static inline int au1xxx_cpu_has_pll_wo(void)
{
switch (read_c0_prid()) {
case 0x00030100: /* Au1000 DA */
case 0x00030201: /* Au1000 HA */
case 0x00030202: /* Au1000 HB */
return 1;
}
return 0;
}
/* does CPU need CONFIG[OD] set to fix tons of errata? */
static inline int au1xxx_cpu_needs_config_od(void)
{
/*
* c0_config.od (bit 19) was write only (and read as 0) on the
* early revisions of Alchemy SOCs. It disables the bus trans-
* action overlapping and needs to be set to fix various errata.
*/
switch (read_c0_prid()) {
case 0x00030100: /* Au1000 DA */
case 0x00030201: /* Au1000 HA */
case 0x00030202: /* Au1000 HB */
case 0x01030200: /* Au1500 AB */
/*
* Au1100/Au1200 errata actually keep silence about this bit,
* so we set it just in case for those revisions that require
* it to be set according to the (now gone) cpu_table.
*/
case 0x02030200: /* Au1100 AB */
case 0x02030201: /* Au1100 BA */
case 0x02030202: /* Au1100 BC */
case 0x04030201: /* Au1200 AC */
return 1;
}
return 0;
}
#define ALCHEMY_CPU_UNKNOWN -1
#define ALCHEMY_CPU_AU1000 0
#define ALCHEMY_CPU_AU1500 1
#define ALCHEMY_CPU_AU1100 2
#define ALCHEMY_CPU_AU1550 3
#define ALCHEMY_CPU_AU1200 4
static inline int alchemy_get_cputype(void)
{
switch (read_c0_prid() & 0xffff0000) {
case 0x00030000:
return ALCHEMY_CPU_AU1000;
break;
case 0x01030000:
return ALCHEMY_CPU_AU1500;
break;
case 0x02030000:
return ALCHEMY_CPU_AU1100;
break;
case 0x03030000:
return ALCHEMY_CPU_AU1550;
break;
case 0x04030000:
case 0x05030000:
return ALCHEMY_CPU_AU1200;
break;
}
return ALCHEMY_CPU_UNKNOWN;
}
static inline void alchemy_uart_putchar(u32 uart_phys, u8 c)
{
void __iomem *base = (void __iomem *)KSEG1ADDR(uart_phys);
int timeout, i;
/* check LSR TX_EMPTY bit */
timeout = 0xffffff;
do {
if (__raw_readl(base + 0x1c) & 0x20)
break;
/* slow down */
for (i = 10000; i; i--)
asm volatile ("nop");
} while (--timeout);
__raw_writel(c, base + 0x04); /* tx */
wmb();
}
/* arch/mips/au1000/common/clocks.c */
extern void set_au1x00_speed(unsigned int new_freq);
extern unsigned int get_au1x00_speed(void);
extern void set_au1x00_uart_baud_base(unsigned long new_baud_base);
extern unsigned long get_au1x00_uart_baud_base(void);
extern unsigned long au1xxx_calc_clock(void);
/* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */
void au1xxx_save_and_sleep(void);
void au_sleep(void);
/* SOC Interrupt numbers */
#define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8)
#define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31)
#define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_LAST + 1)
#define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31)
#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST
enum soc_au1000_ints {
AU1000_FIRST_INT = AU1000_INTC0_INT_BASE,
AU1000_UART0_INT = AU1000_FIRST_INT,
AU1000_UART1_INT,
AU1000_UART2_INT,
AU1000_UART3_INT,
AU1000_SSI0_INT,
AU1000_SSI1_INT,
AU1000_DMA_INT_BASE,
AU1000_TOY_INT = AU1000_FIRST_INT + 14,
AU1000_TOY_MATCH0_INT,
AU1000_TOY_MATCH1_INT,
AU1000_TOY_MATCH2_INT,
AU1000_RTC_INT,
AU1000_RTC_MATCH0_INT,
AU1000_RTC_MATCH1_INT,
AU1000_RTC_MATCH2_INT,
AU1000_IRDA_TX_INT,
AU1000_IRDA_RX_INT,
AU1000_USB_DEV_REQ_INT,
AU1000_USB_DEV_SUS_INT,
AU1000_USB_HOST_INT,
AU1000_ACSYNC_INT,
AU1000_MAC0_DMA_INT,
AU1000_MAC1_DMA_INT,
AU1000_I2S_UO_INT,
AU1000_AC97C_INT,
AU1000_GPIO0_INT,
AU1000_GPIO1_INT,
AU1000_GPIO2_INT,
AU1000_GPIO3_INT,
AU1000_GPIO4_INT,
AU1000_GPIO5_INT,
AU1000_GPIO6_INT,
AU1000_GPIO7_INT,
AU1000_GPIO8_INT,
AU1000_GPIO9_INT,
AU1000_GPIO10_INT,
AU1000_GPIO11_INT,
AU1000_GPIO12_INT,
AU1000_GPIO13_INT,
AU1000_GPIO14_INT,
AU1000_GPIO15_INT,
AU1000_GPIO16_INT,
AU1000_GPIO17_INT,
AU1000_GPIO18_INT,
AU1000_GPIO19_INT,
AU1000_GPIO20_INT,
AU1000_GPIO21_INT,
AU1000_GPIO22_INT,
AU1000_GPIO23_INT,
AU1000_GPIO24_INT,
AU1000_GPIO25_INT,
AU1000_GPIO26_INT,
AU1000_GPIO27_INT,
AU1000_GPIO28_INT,
AU1000_GPIO29_INT,
AU1000_GPIO30_INT,
AU1000_GPIO31_INT,
};
enum soc_au1100_ints {
AU1100_FIRST_INT = AU1000_INTC0_INT_BASE,
AU1100_UART0_INT = AU1100_FIRST_INT,
AU1100_UART1_INT,
AU1100_SD_INT,
AU1100_UART3_INT,
AU1100_SSI0_INT,
AU1100_SSI1_INT,
AU1100_DMA_INT_BASE,
AU1100_TOY_INT = AU1100_FIRST_INT + 14,
AU1100_TOY_MATCH0_INT,
AU1100_TOY_MATCH1_INT,
AU1100_TOY_MATCH2_INT,
AU1100_RTC_INT,
AU1100_RTC_MATCH0_INT,
AU1100_RTC_MATCH1_INT,
AU1100_RTC_MATCH2_INT,
AU1100_IRDA_TX_INT,
AU1100_IRDA_RX_INT,
AU1100_USB_DEV_REQ_INT,
AU1100_USB_DEV_SUS_INT,
AU1100_USB_HOST_INT,
AU1100_ACSYNC_INT,
AU1100_MAC0_DMA_INT,
AU1100_GPIO208_215_INT,
AU1100_LCD_INT,
AU1100_AC97C_INT,
AU1100_GPIO0_INT,
AU1100_GPIO1_INT,
AU1100_GPIO2_INT,
AU1100_GPIO3_INT,
AU1100_GPIO4_INT,
AU1100_GPIO5_INT,
AU1100_GPIO6_INT,
AU1100_GPIO7_INT,
AU1100_GPIO8_INT,
AU1100_GPIO9_INT,
AU1100_GPIO10_INT,
AU1100_GPIO11_INT,
AU1100_GPIO12_INT,
AU1100_GPIO13_INT,
AU1100_GPIO14_INT,
AU1100_GPIO15_INT,
AU1100_GPIO16_INT,
AU1100_GPIO17_INT,
AU1100_GPIO18_INT,
AU1100_GPIO19_INT,
AU1100_GPIO20_INT,
AU1100_GPIO21_INT,
AU1100_GPIO22_INT,
AU1100_GPIO23_INT,
AU1100_GPIO24_INT,
AU1100_GPIO25_INT,
AU1100_GPIO26_INT,
AU1100_GPIO27_INT,
AU1100_GPIO28_INT,
AU1100_GPIO29_INT,
AU1100_GPIO30_INT,
AU1100_GPIO31_INT,
};
enum soc_au1500_ints {
AU1500_FIRST_INT = AU1000_INTC0_INT_BASE,
AU1500_UART0_INT = AU1500_FIRST_INT,
AU1500_PCI_INTA,
AU1500_PCI_INTB,
AU1500_UART3_INT,
AU1500_PCI_INTC,
AU1500_PCI_INTD,
AU1500_DMA_INT_BASE,
AU1500_TOY_INT = AU1500_FIRST_INT + 14,
AU1500_TOY_MATCH0_INT,
AU1500_TOY_MATCH1_INT,
AU1500_TOY_MATCH2_INT,
AU1500_RTC_INT,
AU1500_RTC_MATCH0_INT,
AU1500_RTC_MATCH1_INT,
AU1500_RTC_MATCH2_INT,
AU1500_PCI_ERR_INT,
AU1500_RESERVED_INT,
AU1500_USB_DEV_REQ_INT,
AU1500_USB_DEV_SUS_INT,
AU1500_USB_HOST_INT,
AU1500_ACSYNC_INT,
AU1500_MAC0_DMA_INT,
AU1500_MAC1_DMA_INT,
AU1500_AC97C_INT = AU1500_FIRST_INT + 31,
AU1500_GPIO0_INT,
AU1500_GPIO1_INT,
AU1500_GPIO2_INT,
AU1500_GPIO3_INT,
AU1500_GPIO4_INT,
AU1500_GPIO5_INT,
AU1500_GPIO6_INT,
AU1500_GPIO7_INT,
AU1500_GPIO8_INT,
AU1500_GPIO9_INT,
AU1500_GPIO10_INT,
AU1500_GPIO11_INT,
AU1500_GPIO12_INT,
AU1500_GPIO13_INT,
AU1500_GPIO14_INT,
AU1500_GPIO15_INT,
AU1500_GPIO200_INT,
AU1500_GPIO201_INT,
AU1500_GPIO202_INT,
AU1500_GPIO203_INT,
AU1500_GPIO20_INT,
AU1500_GPIO204_INT,
AU1500_GPIO205_INT,
AU1500_GPIO23_INT,
AU1500_GPIO24_INT,
AU1500_GPIO25_INT,
AU1500_GPIO26_INT,
AU1500_GPIO27_INT,
AU1500_GPIO28_INT,
AU1500_GPIO206_INT,
AU1500_GPIO207_INT,
AU1500_GPIO208_215_INT,
};
enum soc_au1550_ints {
AU1550_FIRST_INT = AU1000_INTC0_INT_BASE,
AU1550_UART0_INT = AU1550_FIRST_INT,
AU1550_PCI_INTA,
AU1550_PCI_INTB,
AU1550_DDMA_INT,
AU1550_CRYPTO_INT,
AU1550_PCI_INTC,
AU1550_PCI_INTD,
AU1550_PCI_RST_INT,
AU1550_UART1_INT,
AU1550_UART3_INT,
AU1550_PSC0_INT,
AU1550_PSC1_INT,
AU1550_PSC2_INT,
AU1550_PSC3_INT,
AU1550_TOY_INT,
AU1550_TOY_MATCH0_INT,
AU1550_TOY_MATCH1_INT,
AU1550_TOY_MATCH2_INT,
AU1550_RTC_INT,
AU1550_RTC_MATCH0_INT,
AU1550_RTC_MATCH1_INT,
AU1550_RTC_MATCH2_INT,
AU1550_NAND_INT = AU1550_FIRST_INT + 23,
AU1550_USB_DEV_REQ_INT,
AU1550_USB_DEV_SUS_INT,
AU1550_USB_HOST_INT,
AU1550_MAC0_DMA_INT,
AU1550_MAC1_DMA_INT,
AU1550_GPIO0_INT = AU1550_FIRST_INT + 32,
AU1550_GPIO1_INT,
AU1550_GPIO2_INT,
AU1550_GPIO3_INT,
AU1550_GPIO4_INT,
AU1550_GPIO5_INT,
AU1550_GPIO6_INT,
AU1550_GPIO7_INT,
AU1550_GPIO8_INT,
AU1550_GPIO9_INT,
AU1550_GPIO10_INT,
AU1550_GPIO11_INT,
AU1550_GPIO12_INT,
AU1550_GPIO13_INT,
AU1550_GPIO14_INT,
AU1550_GPIO15_INT,
AU1550_GPIO200_INT,
AU1550_GPIO201_205_INT, /* Logical or of GPIO201:205 */
AU1550_GPIO16_INT,
AU1550_GPIO17_INT,
AU1550_GPIO20_INT,
AU1550_GPIO21_INT,
AU1550_GPIO22_INT,
AU1550_GPIO23_INT,
AU1550_GPIO24_INT,
AU1550_GPIO25_INT,
AU1550_GPIO26_INT,
AU1550_GPIO27_INT,
AU1550_GPIO28_INT,
AU1550_GPIO206_INT,
AU1550_GPIO207_INT,
AU1550_GPIO208_215_INT, /* Logical or of GPIO208:215 */
};
enum soc_au1200_ints {
AU1200_FIRST_INT = AU1000_INTC0_INT_BASE,
AU1200_UART0_INT = AU1200_FIRST_INT,
AU1200_SWT_INT,
AU1200_SD_INT,
AU1200_DDMA_INT,
AU1200_MAE_BE_INT,
AU1200_GPIO200_INT,
AU1200_GPIO201_INT,
AU1200_GPIO202_INT,
AU1200_UART1_INT,
AU1200_MAE_FE_INT,
AU1200_PSC0_INT,
AU1200_PSC1_INT,
AU1200_AES_INT,
AU1200_CAMERA_INT,
AU1200_TOY_INT,
AU1200_TOY_MATCH0_INT,
AU1200_TOY_MATCH1_INT,
AU1200_TOY_MATCH2_INT,
AU1200_RTC_INT,
AU1200_RTC_MATCH0_INT,
AU1200_RTC_MATCH1_INT,
AU1200_RTC_MATCH2_INT,
AU1200_GPIO203_INT,
AU1200_NAND_INT,
AU1200_GPIO204_INT,
AU1200_GPIO205_INT,
AU1200_GPIO206_INT,
AU1200_GPIO207_INT,
AU1200_GPIO208_215_INT, /* Logical OR of 208:215 */
AU1200_USB_INT,
AU1200_LCD_INT,
AU1200_MAE_BOTH_INT,
AU1200_GPIO0_INT,
AU1200_GPIO1_INT,
AU1200_GPIO2_INT,
AU1200_GPIO3_INT,
AU1200_GPIO4_INT,
AU1200_GPIO5_INT,
AU1200_GPIO6_INT,
AU1200_GPIO7_INT,
AU1200_GPIO8_INT,
AU1200_GPIO9_INT,
AU1200_GPIO10_INT,
AU1200_GPIO11_INT,
AU1200_GPIO12_INT,
AU1200_GPIO13_INT,
AU1200_GPIO14_INT,
AU1200_GPIO15_INT,
AU1200_GPIO16_INT,
AU1200_GPIO17_INT,
AU1200_GPIO18_INT,
AU1200_GPIO19_INT,
AU1200_GPIO20_INT,
AU1200_GPIO21_INT,
AU1200_GPIO22_INT,
AU1200_GPIO23_INT,
AU1200_GPIO24_INT,
AU1200_GPIO25_INT,
AU1200_GPIO26_INT,
AU1200_GPIO27_INT,
AU1200_GPIO28_INT,
AU1200_GPIO29_INT,
AU1200_GPIO30_INT,
AU1200_GPIO31_INT,
};
#endif /* !defined (_LANGUAGE_ASSEMBLY) */
/*
* SDRAM register offsets
*/
#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \
defined(CONFIG_SOC_AU1100)
#define MEM_SDMODE0 0x0000
#define MEM_SDMODE1 0x0004
#define MEM_SDMODE2 0x0008
#define MEM_SDADDR0 0x000C
#define MEM_SDADDR1 0x0010
#define MEM_SDADDR2 0x0014
#define MEM_SDREFCFG 0x0018
#define MEM_SDPRECMD 0x001C
#define MEM_SDAUTOREF 0x0020
#define MEM_SDWRMD0 0x0024
#define MEM_SDWRMD1 0x0028
#define MEM_SDWRMD2 0x002C
#define MEM_SDSLEEP 0x0030
#define MEM_SDSMCKE 0x0034
/*
* MEM_SDMODE register content definitions
*/
#define MEM_SDMODE_F (1 << 22)
#define MEM_SDMODE_SR (1 << 21)
#define MEM_SDMODE_BS (1 << 20)
#define MEM_SDMODE_RS (3 << 18)
#define MEM_SDMODE_CS (7 << 15)
#define MEM_SDMODE_TRAS (15 << 11)
#define MEM_SDMODE_TMRD (3 << 9)
#define MEM_SDMODE_TWR (3 << 7)
#define MEM_SDMODE_TRP (3 << 5)
#define MEM_SDMODE_TRCD (3 << 3)
#define MEM_SDMODE_TCL (7 << 0)
#define MEM_SDMODE_BS_2Bank (0 << 20)
#define MEM_SDMODE_BS_4Bank (1 << 20)
#define MEM_SDMODE_RS_11Row (0 << 18)
#define MEM_SDMODE_RS_12Row (1 << 18)
#define MEM_SDMODE_RS_13Row (2 << 18)
#define MEM_SDMODE_RS_N(N) ((N) << 18)
#define MEM_SDMODE_CS_7Col (0 << 15)
#define MEM_SDMODE_CS_8Col (1 << 15)
#define MEM_SDMODE_CS_9Col (2 << 15)
#define MEM_SDMODE_CS_10Col (3 << 15)
#define MEM_SDMODE_CS_11Col (4 << 15)
#define MEM_SDMODE_CS_N(N) ((N) << 15)
#define MEM_SDMODE_TRAS_N(N) ((N) << 11)
#define MEM_SDMODE_TMRD_N(N) ((N) << 9)
#define MEM_SDMODE_TWR_N(N) ((N) << 7)
#define MEM_SDMODE_TRP_N(N) ((N) << 5)
#define MEM_SDMODE_TRCD_N(N) ((N) << 3)
#define MEM_SDMODE_TCL_N(N) ((N) << 0)
/*
* MEM_SDADDR register contents definitions
*/
#define MEM_SDADDR_E (1 << 20)
#define MEM_SDADDR_CSBA (0x03FF << 10)
#define MEM_SDADDR_CSMASK (0x03FF << 0)
#define MEM_SDADDR_CSBA_N(N) ((N) & (0x03FF << 22) >> 12)
#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF << 22) >> 22)
/*
* MEM_SDREFCFG register content definitions
*/
#define MEM_SDREFCFG_TRC (15 << 28)
#define MEM_SDREFCFG_TRPM (3 << 26)
#define MEM_SDREFCFG_E (1 << 25)
#define MEM_SDREFCFG_RE (0x1ffffff << 0)
#define MEM_SDREFCFG_TRC_N(N) ((N) << MEM_SDREFCFG_TRC)
#define MEM_SDREFCFG_TRPM_N(N) ((N) << MEM_SDREFCFG_TRPM)
#define MEM_SDREFCFG_REF_N(N) (N)
#endif
/***********************************************************************/
/*
* Au1550 SDRAM Register Offsets
*/
/***********************************************************************/
#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
#define MEM_SDMODE0 0x0800
#define MEM_SDMODE1 0x0808
#define MEM_SDMODE2 0x0810
#define MEM_SDADDR0 0x0820
#define MEM_SDADDR1 0x0828
#define MEM_SDADDR2 0x0830
#define MEM_SDCONFIGA 0x0840
#define MEM_SDCONFIGB 0x0848
#define MEM_SDSTAT 0x0850
#define MEM_SDERRADDR 0x0858
#define MEM_SDSTRIDE0 0x0860
#define MEM_SDSTRIDE1 0x0868
#define MEM_SDSTRIDE2 0x0870
#define MEM_SDWRMD0 0x0880
#define MEM_SDWRMD1 0x0888
#define MEM_SDWRMD2 0x0890
#define MEM_SDPRECMD 0x08C0
#define MEM_SDAUTOREF 0x08C8
#define MEM_SDSREF 0x08D0
#define MEM_SDSLEEP MEM_SDSREF
#endif
/*
* Physical base addresses for integrated peripherals
*/
#ifdef CONFIG_SOC_AU1000
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
#define DMA0_PHYS_ADDR 0x14002000
#define DMA1_PHYS_ADDR 0x14002100
#define DMA2_PHYS_ADDR 0x14002200
#define DMA3_PHYS_ADDR 0x14002300
#define DMA4_PHYS_ADDR 0x14002400
#define DMA5_PHYS_ADDR 0x14002500
#define DMA6_PHYS_ADDR 0x14002600
#define DMA7_PHYS_ADDR 0x14002700
#define IC0_PHYS_ADDR 0x10400000
#define IC1_PHYS_ADDR 0x11800000
#define AC97_PHYS_ADDR 0x10000000
#define USBH_PHYS_ADDR 0x10100000
#define USBD_PHYS_ADDR 0x10200000
#define IRDA_PHYS_ADDR 0x10300000
#define MAC0_PHYS_ADDR 0x10500000
#define MAC1_PHYS_ADDR 0x10510000
#define MACEN_PHYS_ADDR 0x10520000
#define MACDMA0_PHYS_ADDR 0x14004000
#define MACDMA1_PHYS_ADDR 0x14004200
#define I2S_PHYS_ADDR 0x11000000
#define UART0_PHYS_ADDR 0x11100000
#define UART1_PHYS_ADDR 0x11200000
#define UART2_PHYS_ADDR 0x11300000
#define UART3_PHYS_ADDR 0x11400000
#define SSI0_PHYS_ADDR 0x11600000
#define SSI1_PHYS_ADDR 0x11680000
#define SYS_PHYS_ADDR 0x11900000
#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/********************************************************************/
#ifdef CONFIG_SOC_AU1500
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
#define DMA0_PHYS_ADDR 0x14002000
#define DMA1_PHYS_ADDR 0x14002100
#define DMA2_PHYS_ADDR 0x14002200
#define DMA3_PHYS_ADDR 0x14002300
#define DMA4_PHYS_ADDR 0x14002400
#define DMA5_PHYS_ADDR 0x14002500
#define DMA6_PHYS_ADDR 0x14002600
#define DMA7_PHYS_ADDR 0x14002700
#define IC0_PHYS_ADDR 0x10400000
#define IC1_PHYS_ADDR 0x11800000
#define AC97_PHYS_ADDR 0x10000000
#define USBH_PHYS_ADDR 0x10100000
#define USBD_PHYS_ADDR 0x10200000
#define PCI_PHYS_ADDR 0x14005000
#define MAC0_PHYS_ADDR 0x11500000
#define MAC1_PHYS_ADDR 0x11510000
#define MACEN_PHYS_ADDR 0x11520000
#define MACDMA0_PHYS_ADDR 0x14004000
#define MACDMA1_PHYS_ADDR 0x14004200
#define I2S_PHYS_ADDR 0x11000000
#define UART0_PHYS_ADDR 0x11100000
#define UART3_PHYS_ADDR 0x11400000
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
#define PCI_MEM_PHYS_ADDR 0x400000000ULL
#define PCI_IO_PHYS_ADDR 0x500000000ULL
#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/********************************************************************/
#ifdef CONFIG_SOC_AU1100
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
#define DMA0_PHYS_ADDR 0x14002000
#define DMA1_PHYS_ADDR 0x14002100
#define DMA2_PHYS_ADDR 0x14002200
#define DMA3_PHYS_ADDR 0x14002300
#define DMA4_PHYS_ADDR 0x14002400
#define DMA5_PHYS_ADDR 0x14002500
#define DMA6_PHYS_ADDR 0x14002600
#define DMA7_PHYS_ADDR 0x14002700
#define IC0_PHYS_ADDR 0x10400000
#define SD0_PHYS_ADDR 0x10600000
#define SD1_PHYS_ADDR 0x10680000
#define IC1_PHYS_ADDR 0x11800000
#define AC97_PHYS_ADDR 0x10000000
#define USBH_PHYS_ADDR 0x10100000
#define USBD_PHYS_ADDR 0x10200000
#define IRDA_PHYS_ADDR 0x10300000
#define MAC0_PHYS_ADDR 0x10500000
#define MACEN_PHYS_ADDR 0x10520000
#define MACDMA0_PHYS_ADDR 0x14004000
#define MACDMA1_PHYS_ADDR 0x14004200
#define I2S_PHYS_ADDR 0x11000000
#define UART0_PHYS_ADDR 0x11100000
#define UART1_PHYS_ADDR 0x11200000
#define UART3_PHYS_ADDR 0x11400000
#define SSI0_PHYS_ADDR 0x11600000
#define SSI1_PHYS_ADDR 0x11680000
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
#define LCD_PHYS_ADDR 0x15000000
#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/***********************************************************************/
#ifdef CONFIG_SOC_AU1550
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
#define IC0_PHYS_ADDR 0x10400000
#define IC1_PHYS_ADDR 0x11800000
#define USBH_PHYS_ADDR 0x14020000
#define USBD_PHYS_ADDR 0x10200000
#define PCI_PHYS_ADDR 0x14005000
#define MAC0_PHYS_ADDR 0x10500000
#define MAC1_PHYS_ADDR 0x10510000
#define MACEN_PHYS_ADDR 0x10520000
#define MACDMA0_PHYS_ADDR 0x14004000
#define MACDMA1_PHYS_ADDR 0x14004200
#define UART0_PHYS_ADDR 0x11100000
#define UART1_PHYS_ADDR 0x11200000
#define UART3_PHYS_ADDR 0x11400000
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
#define DDMA_PHYS_ADDR 0x14002000
#define PE_PHYS_ADDR 0x14008000
#define PSC0_PHYS_ADDR 0x11A00000
#define PSC1_PHYS_ADDR 0x11B00000
#define PSC2_PHYS_ADDR 0x10A00000
#define PSC3_PHYS_ADDR 0x10B00000
#define PCI_MEM_PHYS_ADDR 0x400000000ULL
#define PCI_IO_PHYS_ADDR 0x500000000ULL
#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/***********************************************************************/
#ifdef CONFIG_SOC_AU1200
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
#define AES_PHYS_ADDR 0x10300000
#define CIM_PHYS_ADDR 0x14004000
#define IC0_PHYS_ADDR 0x10400000
#define IC1_PHYS_ADDR 0x11800000
#define USBM_PHYS_ADDR 0x14020000
#define USBH_PHYS_ADDR 0x14020100
#define UART0_PHYS_ADDR 0x11100000
#define UART1_PHYS_ADDR 0x11200000
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
#define DDMA_PHYS_ADDR 0x14002000
#define PSC0_PHYS_ADDR 0x11A00000
#define PSC1_PHYS_ADDR 0x11B00000
#define SD0_PHYS_ADDR 0x10600000
#define SD1_PHYS_ADDR 0x10680000
#define LCD_PHYS_ADDR 0x15000000
#define SWCNT_PHYS_ADDR 0x1110010C
#define MAEFE_PHYS_ADDR 0x14012000
#define MAEBE_PHYS_ADDR 0x14010000
#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/* Static Bus Controller */
#define MEM_STCFG0 0xB4001000
#define MEM_STTIME0 0xB4001004
#define MEM_STADDR0 0xB4001008
#define MEM_STCFG1 0xB4001010
#define MEM_STTIME1 0xB4001014
#define MEM_STADDR1 0xB4001018
#define MEM_STCFG2 0xB4001020
#define MEM_STTIME2 0xB4001024
#define MEM_STADDR2 0xB4001028
#define MEM_STCFG3 0xB4001030
#define MEM_STTIME3 0xB4001034
#define MEM_STADDR3 0xB4001038
#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
#define MEM_STNDCTL 0xB4001100
#define MEM_STSTAT 0xB4001104
#define MEM_STNAND_CMD 0x0
#define MEM_STNAND_ADDR 0x4
#define MEM_STNAND_DATA 0x20
#endif
/* Interrupt Controller register offsets */
#define IC_CFG0RD 0x40
#define IC_CFG0SET 0x40
#define IC_CFG0CLR 0x44
#define IC_CFG1RD 0x48
#define IC_CFG1SET 0x48
#define IC_CFG1CLR 0x4C
#define IC_CFG2RD 0x50
#define IC_CFG2SET 0x50
#define IC_CFG2CLR 0x54
#define IC_REQ0INT 0x54
#define IC_SRCRD 0x58
#define IC_SRCSET 0x58
#define IC_SRCCLR 0x5C
#define IC_REQ1INT 0x5C
#define IC_ASSIGNRD 0x60
#define IC_ASSIGNSET 0x60
#define IC_ASSIGNCLR 0x64
#define IC_WAKERD 0x68
#define IC_WAKESET 0x68
#define IC_WAKECLR 0x6C
#define IC_MASKRD 0x70
#define IC_MASKSET 0x70
#define IC_MASKCLR 0x74
#define IC_RISINGRD 0x78
#define IC_RISINGCLR 0x78
#define IC_FALLINGRD 0x7C
#define IC_FALLINGCLR 0x7C
#define IC_TESTBIT 0x80
/* Interrupt Controller 0 */
#define IC0_CFG0RD 0xB0400040
#define IC0_CFG0SET 0xB0400040
#define IC0_CFG0CLR 0xB0400044
#define IC0_CFG1RD 0xB0400048
#define IC0_CFG1SET 0xB0400048
#define IC0_CFG1CLR 0xB040004C
#define IC0_CFG2RD 0xB0400050
#define IC0_CFG2SET 0xB0400050
#define IC0_CFG2CLR 0xB0400054
#define IC0_REQ0INT 0xB0400054
#define IC0_SRCRD 0xB0400058
#define IC0_SRCSET 0xB0400058
#define IC0_SRCCLR 0xB040005C
#define IC0_REQ1INT 0xB040005C
#define IC0_ASSIGNRD 0xB0400060
#define IC0_ASSIGNSET 0xB0400060
#define IC0_ASSIGNCLR 0xB0400064
#define IC0_WAKERD 0xB0400068
#define IC0_WAKESET 0xB0400068
#define IC0_WAKECLR 0xB040006C
#define IC0_MASKRD 0xB0400070
#define IC0_MASKSET 0xB0400070
#define IC0_MASKCLR 0xB0400074
#define IC0_RISINGRD 0xB0400078
#define IC0_RISINGCLR 0xB0400078
#define IC0_FALLINGRD 0xB040007C
#define IC0_FALLINGCLR 0xB040007C
#define IC0_TESTBIT 0xB0400080
/* Interrupt Controller 1 */
#define IC1_CFG0RD 0xB1800040
#define IC1_CFG0SET 0xB1800040
#define IC1_CFG0CLR 0xB1800044
#define IC1_CFG1RD 0xB1800048
#define IC1_CFG1SET 0xB1800048
#define IC1_CFG1CLR 0xB180004C
#define IC1_CFG2RD 0xB1800050
#define IC1_CFG2SET 0xB1800050
#define IC1_CFG2CLR 0xB1800054
#define IC1_REQ0INT 0xB1800054
#define IC1_SRCRD 0xB1800058
#define IC1_SRCSET 0xB1800058
#define IC1_SRCCLR 0xB180005C
#define IC1_REQ1INT 0xB180005C
#define IC1_ASSIGNRD 0xB1800060
#define IC1_ASSIGNSET 0xB1800060
#define IC1_ASSIGNCLR 0xB1800064
#define IC1_WAKERD 0xB1800068
#define IC1_WAKESET 0xB1800068
#define IC1_WAKECLR 0xB180006C
#define IC1_MASKRD 0xB1800070
#define IC1_MASKSET 0xB1800070
#define IC1_MASKCLR 0xB1800074
#define IC1_RISINGRD 0xB1800078
#define IC1_RISINGCLR 0xB1800078
#define IC1_FALLINGRD 0xB180007C
#define IC1_FALLINGCLR 0xB180007C
#define IC1_TESTBIT 0xB1800080
/* Au1000 */
#ifdef CONFIG_SOC_AU1000
#define UART0_ADDR 0xB1100000
#define UART3_ADDR 0xB1400000
#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
#define USB_HOST_CONFIG 0xB017FFFC
#define FOR_PLATFORM_C_USB_HOST_INT AU1000_USB_HOST_INT
#define AU1000_ETH0_BASE 0xB0500000
#define AU1000_ETH1_BASE 0xB0510000
#define AU1000_MAC0_ENABLE 0xB0520000
#define AU1000_MAC1_ENABLE 0xB0520004
#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1000 */
/* Au1500 */
#ifdef CONFIG_SOC_AU1500
#define UART0_ADDR 0xB1100000
#define UART3_ADDR 0xB1400000
#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
#define USB_HOST_CONFIG 0xB017fffc
#define FOR_PLATFORM_C_USB_HOST_INT AU1500_USB_HOST_INT
#define AU1500_ETH0_BASE 0xB1500000
#define AU1500_ETH1_BASE 0xB1510000
#define AU1500_MAC0_ENABLE 0xB1520000
#define AU1500_MAC1_ENABLE 0xB1520004
#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1500 */
/* Au1100 */
#ifdef CONFIG_SOC_AU1100
#define UART0_ADDR 0xB1100000
#define UART3_ADDR 0xB1400000
#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
#define USB_HOST_CONFIG 0xB017FFFC
#define FOR_PLATFORM_C_USB_HOST_INT AU1100_USB_HOST_INT
#define AU1100_ETH0_BASE 0xB0500000
#define AU1100_MAC0_ENABLE 0xB0520000
#define NUM_ETH_INTERFACES 1
#endif /* CONFIG_SOC_AU1100 */
#ifdef CONFIG_SOC_AU1550
#define UART0_ADDR 0xB1100000
#define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */
#define USB_OHCI_LEN 0x00060000
#define USB_HOST_CONFIG 0xB4027ffc
#define FOR_PLATFORM_C_USB_HOST_INT AU1550_USB_HOST_INT
#define AU1550_ETH0_BASE 0xB0500000
#define AU1550_ETH1_BASE 0xB0510000
#define AU1550_MAC0_ENABLE 0xB0520000
#define AU1550_MAC1_ENABLE 0xB0520004
#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1550 */
#ifdef CONFIG_SOC_AU1200
#define UART0_ADDR 0xB1100000
#define USB_UOC_BASE 0x14020020
#define USB_UOC_LEN 0x20
#define USB_OHCI_BASE 0x14020100
#define USB_OHCI_LEN 0x100
#define USB_EHCI_BASE 0x14020200
#define USB_EHCI_LEN 0x100
#define USB_UDC_BASE 0x14022000
#define USB_UDC_LEN 0x2000
#define USB_MSR_BASE 0xB4020000
#define USB_MSR_MCFG 4
#define USBMSRMCFG_OMEMEN 0
#define USBMSRMCFG_OBMEN 1
#define USBMSRMCFG_EMEMEN 2
#define USBMSRMCFG_EBMEN 3
#define USBMSRMCFG_DMEMEN 4
#define USBMSRMCFG_DBMEN 5
#define USBMSRMCFG_GMEMEN 6
#define USBMSRMCFG_OHCCLKEN 16
#define USBMSRMCFG_EHCCLKEN 17
#define USBMSRMCFG_UDCCLKEN 18
#define USBMSRMCFG_PHYPLLEN 19
#define USBMSRMCFG_RDCOMB 30
#define USBMSRMCFG_PFEN 31
#define FOR_PLATFORM_C_USB_HOST_INT AU1200_USB_INT
#endif /* CONFIG_SOC_AU1200 */
/* Programmable Counters 0 and 1 */
#define SYS_BASE 0xB1900000
#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14)
# define SYS_CNTRL_E1S (1 << 23)
# define SYS_CNTRL_T1S (1 << 20)
# define SYS_CNTRL_M21 (1 << 19)
# define SYS_CNTRL_M11 (1 << 18)
# define SYS_CNTRL_M01 (1 << 17)
# define SYS_CNTRL_C1S (1 << 16)
# define SYS_CNTRL_BP (1 << 14)
# define SYS_CNTRL_EN1 (1 << 13)
# define SYS_CNTRL_BT1 (1 << 12)
# define SYS_CNTRL_EN0 (1 << 11)
# define SYS_CNTRL_BT0 (1 << 10)
# define SYS_CNTRL_E0 (1 << 8)
# define SYS_CNTRL_E0S (1 << 7)
# define SYS_CNTRL_32S (1 << 5)
# define SYS_CNTRL_T0S (1 << 4)
# define SYS_CNTRL_M20 (1 << 3)
# define SYS_CNTRL_M10 (1 << 2)
# define SYS_CNTRL_M00 (1 << 1)
# define SYS_CNTRL_C0S (1 << 0)
/* Programmable Counter 0 Registers */
#define SYS_TOYTRIM (SYS_BASE + 0)
#define SYS_TOYWRITE (SYS_BASE + 4)
#define SYS_TOYMATCH0 (SYS_BASE + 8)
#define SYS_TOYMATCH1 (SYS_BASE + 0xC)
#define SYS_TOYMATCH2 (SYS_BASE + 0x10)
#define SYS_TOYREAD (SYS_BASE + 0x40)
/* Programmable Counter 1 Registers */
#define SYS_RTCTRIM (SYS_BASE + 0x44)
#define SYS_RTCWRITE (SYS_BASE + 0x48)
#define SYS_RTCMATCH0 (SYS_BASE + 0x4C)
#define SYS_RTCMATCH1 (SYS_BASE + 0x50)
#define SYS_RTCMATCH2 (SYS_BASE + 0x54)
#define SYS_RTCREAD (SYS_BASE + 0x58)
/* I2S Controller */
#define I2S_DATA 0xB1000000
# define I2S_DATA_MASK 0xffffff
#define I2S_CONFIG 0xB1000004
# define I2S_CONFIG_XU (1 << 25)
# define I2S_CONFIG_XO (1 << 24)
# define I2S_CONFIG_RU (1 << 23)
# define I2S_CONFIG_RO (1 << 22)
# define I2S_CONFIG_TR (1 << 21)
# define I2S_CONFIG_TE (1 << 20)
# define I2S_CONFIG_TF (1 << 19)
# define I2S_CONFIG_RR (1 << 18)
# define I2S_CONFIG_RE (1 << 17)
# define I2S_CONFIG_RF (1 << 16)
# define I2S_CONFIG_PD (1 << 11)
# define I2S_CONFIG_LB (1 << 10)
# define I2S_CONFIG_IC (1 << 9)
# define I2S_CONFIG_FM_BIT 7
# define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT)
# define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT)
# define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT)
# define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT)
# define I2S_CONFIG_TN (1 << 6)
# define I2S_CONFIG_RN (1 << 5)
# define I2S_CONFIG_SZ_BIT 0
# define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT)
#define I2S_CONTROL 0xB1000008
# define I2S_CONTROL_D (1 << 1)
# define I2S_CONTROL_CE (1 << 0)
/* USB Host Controller */
#ifndef USB_OHCI_LEN
#define USB_OHCI_LEN 0x00100000
#endif
#ifndef CONFIG_SOC_AU1200
/* USB Device Controller */
#define USBD_EP0RD 0xB0200000
#define USBD_EP0WR 0xB0200004
#define USBD_EP2WR 0xB0200008
#define USBD_EP3WR 0xB020000C
#define USBD_EP4RD 0xB0200010
#define USBD_EP5RD 0xB0200014
#define USBD_INTEN 0xB0200018
#define USBD_INTSTAT 0xB020001C
# define USBDEV_INT_SOF (1 << 12)
# define USBDEV_INT_HF_BIT 6
# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT)
# define USBDEV_INT_CMPLT_BIT 0
# define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT)
#define USBD_CONFIG 0xB0200020
#define USBD_EP0CS 0xB0200024
#define USBD_EP2CS 0xB0200028
#define USBD_EP3CS 0xB020002C
#define USBD_EP4CS 0xB0200030
#define USBD_EP5CS 0xB0200034
# define USBDEV_CS_SU (1 << 14)
# define USBDEV_CS_NAK (1 << 13)
# define USBDEV_CS_ACK (1 << 12)
# define USBDEV_CS_BUSY (1 << 11)
# define USBDEV_CS_TSIZE_BIT 1
# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT)
# define USBDEV_CS_STALL (1 << 0)
#define USBD_EP0RDSTAT 0xB0200040
#define USBD_EP0WRSTAT 0xB0200044
#define USBD_EP2WRSTAT 0xB0200048
#define USBD_EP3WRSTAT 0xB020004C
#define USBD_EP4RDSTAT 0xB0200050
#define USBD_EP5RDSTAT 0xB0200054
# define USBDEV_FSTAT_FLUSH (1 << 6)
# define USBDEV_FSTAT_UF (1 << 5)
# define USBDEV_FSTAT_OF (1 << 4)
# define USBDEV_FSTAT_FCNT_BIT 0
# define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT)
#define USBD_ENABLE 0xB0200058
# define USBDEV_ENABLE (1 << 1)
# define USBDEV_CE (1 << 0)
#endif /* !CONFIG_SOC_AU1200 */
/* Ethernet Controllers */
/* 4 byte offsets from AU1000_ETH_BASE */
#define MAC_CONTROL 0x0
# define MAC_RX_ENABLE (1 << 2)
# define MAC_TX_ENABLE (1 << 3)
# define MAC_DEF_CHECK (1 << 5)
# define MAC_SET_BL(X) (((X) & 0x3) << 6)
# define MAC_AUTO_PAD (1 << 8)
# define MAC_DISABLE_RETRY (1 << 10)
# define MAC_DISABLE_BCAST (1 << 11)
# define MAC_LATE_COL (1 << 12)
# define MAC_HASH_MODE (1 << 13)
# define MAC_HASH_ONLY (1 << 15)
# define MAC_PASS_ALL (1 << 16)
# define MAC_INVERSE_FILTER (1 << 17)
# define MAC_PROMISCUOUS (1 << 18)
# define MAC_PASS_ALL_MULTI (1 << 19)
# define MAC_FULL_DUPLEX (1 << 20)
# define MAC_NORMAL_MODE 0
# define MAC_INT_LOOPBACK (1 << 21)
# define MAC_EXT_LOOPBACK (1 << 22)
# define MAC_DISABLE_RX_OWN (1 << 23)
# define MAC_BIG_ENDIAN (1 << 30)
# define MAC_RX_ALL (1 << 31)
#define MAC_ADDRESS_HIGH 0x4
#define MAC_ADDRESS_LOW 0x8
#define MAC_MCAST_HIGH 0xC
#define MAC_MCAST_LOW 0x10
#define MAC_MII_CNTRL 0x14
# define MAC_MII_BUSY (1 << 0)
# define MAC_MII_READ 0
# define MAC_MII_WRITE (1 << 1)
# define MAC_SET_MII_SELECT_REG(X) (((X) & 0x1f) << 6)
# define MAC_SET_MII_SELECT_PHY(X) (((X) & 0x1f) << 11)
#define MAC_MII_DATA 0x18
#define MAC_FLOW_CNTRL 0x1C
# define MAC_FLOW_CNTRL_BUSY (1 << 0)
# define MAC_FLOW_CNTRL_ENABLE (1 << 1)
# define MAC_PASS_CONTROL (1 << 2)
# define MAC_SET_PAUSE(X) (((X) & 0xffff) << 16)
#define MAC_VLAN1_TAG 0x20
#define MAC_VLAN2_TAG 0x24
/* Ethernet Controller Enable */
# define MAC_EN_CLOCK_ENABLE (1 << 0)
# define MAC_EN_RESET0 (1 << 1)
# define MAC_EN_TOSS (0 << 2)
# define MAC_EN_CACHEABLE (1 << 3)
# define MAC_EN_RESET1 (1 << 4)
# define MAC_EN_RESET2 (1 << 5)
# define MAC_DMA_RESET (1 << 6)
/* Ethernet Controller DMA Channels */
#define MAC0_TX_DMA_ADDR 0xB4004000
#define MAC1_TX_DMA_ADDR 0xB4004200
/* offsets from MAC_TX_RING_ADDR address */
#define MAC_TX_BUFF0_STATUS 0x0
# define TX_FRAME_ABORTED (1 << 0)
# define TX_JAB_TIMEOUT (1 << 1)
# define TX_NO_CARRIER (1 << 2)
# define TX_LOSS_CARRIER (1 << 3)
# define TX_EXC_DEF (1 << 4)
# define TX_LATE_COLL_ABORT (1 << 5)
# define TX_EXC_COLL (1 << 6)
# define TX_UNDERRUN (1 << 7)
# define TX_DEFERRED (1 << 8)
# define TX_LATE_COLL (1 << 9)
# define TX_COLL_CNT_MASK (0xF << 10)
# define TX_PKT_RETRY (1 << 31)
#define MAC_TX_BUFF0_ADDR 0x4
# define TX_DMA_ENABLE (1 << 0)
# define TX_T_DONE (1 << 1)
# define TX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3)
#define MAC_TX_BUFF0_LEN 0x8
#define MAC_TX_BUFF1_STATUS 0x10
#define MAC_TX_BUFF1_ADDR 0x14
#define MAC_TX_BUFF1_LEN 0x18
#define MAC_TX_BUFF2_STATUS 0x20
#define MAC_TX_BUFF2_ADDR 0x24
#define MAC_TX_BUFF2_LEN 0x28
#define MAC_TX_BUFF3_STATUS 0x30
#define MAC_TX_BUFF3_ADDR 0x34
#define MAC_TX_BUFF3_LEN 0x38
#define MAC0_RX_DMA_ADDR 0xB4004100
#define MAC1_RX_DMA_ADDR 0xB4004300
/* offsets from MAC_RX_RING_ADDR */
#define MAC_RX_BUFF0_STATUS 0x0
# define RX_FRAME_LEN_MASK 0x3fff
# define RX_WDOG_TIMER (1 << 14)
# define RX_RUNT (1 << 15)
# define RX_OVERLEN (1 << 16)
# define RX_COLL (1 << 17)
# define RX_ETHER (1 << 18)
# define RX_MII_ERROR (1 << 19)
# define RX_DRIBBLING (1 << 20)
# define RX_CRC_ERROR (1 << 21)
# define RX_VLAN1 (1 << 22)
# define RX_VLAN2 (1 << 23)
# define RX_LEN_ERROR (1 << 24)
# define RX_CNTRL_FRAME (1 << 25)
# define RX_U_CNTRL_FRAME (1 << 26)
# define RX_MCAST_FRAME (1 << 27)
# define RX_BCAST_FRAME (1 << 28)
# define RX_FILTER_FAIL (1 << 29)
# define RX_PACKET_FILTER (1 << 30)
# define RX_MISSED_FRAME (1 << 31)
# define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \
RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \
RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME)
#define MAC_RX_BUFF0_ADDR 0x4
# define RX_DMA_ENABLE (1 << 0)
# define RX_T_DONE (1 << 1)
# define RX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3)
# define RX_SET_BUFF_ADDR(X) ((X) & 0xffffffc0)
#define MAC_RX_BUFF1_STATUS 0x10
#define MAC_RX_BUFF1_ADDR 0x14
#define MAC_RX_BUFF2_STATUS 0x20
#define MAC_RX_BUFF2_ADDR 0x24
#define MAC_RX_BUFF3_STATUS 0x30
#define MAC_RX_BUFF3_ADDR 0x34
#define UART_RX 0 /* Receive buffer */
#define UART_TX 4 /* Transmit buffer */
#define UART_IER 8 /* Interrupt Enable Register */
#define UART_IIR 0xC /* Interrupt ID Register */
#define UART_FCR 0x10 /* FIFO Control Register */
#define UART_LCR 0x14 /* Line Control Register */
#define UART_MCR 0x18 /* Modem Control Register */
#define UART_LSR 0x1C /* Line Status Register */
#define UART_MSR 0x20 /* Modem Status Register */
#define UART_CLK 0x28 /* Baud Rate Clock Divider */
#define UART_MOD_CNTRL 0x100 /* Module Control */
/* SSIO */
#define SSI0_STATUS 0xB1600000
# define SSI_STATUS_BF (1 << 4)
# define SSI_STATUS_OF (1 << 3)
# define SSI_STATUS_UF (1 << 2)
# define SSI_STATUS_D (1 << 1)
# define SSI_STATUS_B (1 << 0)
#define SSI0_INT 0xB1600004
# define SSI_INT_OI (1 << 3)
# define SSI_INT_UI (1 << 2)
# define SSI_INT_DI (1 << 1)
#define SSI0_INT_ENABLE 0xB1600008
# define SSI_INTE_OIE (1 << 3)
# define SSI_INTE_UIE (1 << 2)
# define SSI_INTE_DIE (1 << 1)
#define SSI0_CONFIG 0xB1600020
# define SSI_CONFIG_AO (1 << 24)
# define SSI_CONFIG_DO (1 << 23)
# define SSI_CONFIG_ALEN_BIT 20
# define SSI_CONFIG_ALEN_MASK (0x7 << 20)
# define SSI_CONFIG_DLEN_BIT 16
# define SSI_CONFIG_DLEN_MASK (0x7 << 16)
# define SSI_CONFIG_DD (1 << 11)
# define SSI_CONFIG_AD (1 << 10)
# define SSI_CONFIG_BM_BIT 8
# define SSI_CONFIG_BM_MASK (0x3 << 8)
# define SSI_CONFIG_CE (1 << 7)
# define SSI_CONFIG_DP (1 << 6)
# define SSI_CONFIG_DL (1 << 5)
# define SSI_CONFIG_EP (1 << 4)
#define SSI0_ADATA 0xB1600024
# define SSI_AD_D (1 << 24)
# define SSI_AD_ADDR_BIT 16
# define SSI_AD_ADDR_MASK (0xff << 16)
# define SSI_AD_DATA_BIT 0
# define SSI_AD_DATA_MASK (0xfff << 0)
#define SSI0_CLKDIV 0xB1600028
#define SSI0_CONTROL 0xB1600100
# define SSI_CONTROL_CD (1 << 1)
# define SSI_CONTROL_E (1 << 0)
/* SSI1 */
#define SSI1_STATUS 0xB1680000
#define SSI1_INT 0xB1680004
#define SSI1_INT_ENABLE 0xB1680008
#define SSI1_CONFIG 0xB1680020
#define SSI1_ADATA 0xB1680024
#define SSI1_CLKDIV 0xB1680028
#define SSI1_ENABLE 0xB1680100
/*
* Register content definitions
*/
#define SSI_STATUS_BF (1 << 4)
#define SSI_STATUS_OF (1 << 3)
#define SSI_STATUS_UF (1 << 2)
#define SSI_STATUS_D (1 << 1)
#define SSI_STATUS_B (1 << 0)
/* SSI_INT */
#define SSI_INT_OI (1 << 3)
#define SSI_INT_UI (1 << 2)
#define SSI_INT_DI (1 << 1)
/* SSI_INTEN */
#define SSI_INTEN_OIE (1 << 3)
#define SSI_INTEN_UIE (1 << 2)
#define SSI_INTEN_DIE (1 << 1)
#define SSI_CONFIG_AO (1 << 24)
#define SSI_CONFIG_DO (1 << 23)
#define SSI_CONFIG_ALEN (7 << 20)
#define SSI_CONFIG_DLEN (15 << 16)
#define SSI_CONFIG_DD (1 << 11)
#define SSI_CONFIG_AD (1 << 10)
#define SSI_CONFIG_BM (3 << 8)
#define SSI_CONFIG_CE (1 << 7)
#define SSI_CONFIG_DP (1 << 6)
#define SSI_CONFIG_DL (1 << 5)
#define SSI_CONFIG_EP (1 << 4)
#define SSI_CONFIG_ALEN_N(N) ((N-1) << 20)
#define SSI_CONFIG_DLEN_N(N) ((N-1) << 16)
#define SSI_CONFIG_BM_HI (0 << 8)
#define SSI_CONFIG_BM_LO (1 << 8)
#define SSI_CONFIG_BM_CY (2 << 8)
#define SSI_ADATA_D (1 << 24)
#define SSI_ADATA_ADDR (0xFF << 16)
#define SSI_ADATA_DATA 0x0FFF
#define SSI_ADATA_ADDR_N(N) (N << 16)
#define SSI_ENABLE_CD (1 << 1)
#define SSI_ENABLE_E (1 << 0)
/* IrDA Controller */
#define IRDA_BASE 0xB0300000
#define IR_RING_PTR_STATUS (IRDA_BASE + 0x00)
#define IR_RING_BASE_ADDR_H (IRDA_BASE + 0x04)
#define IR_RING_BASE_ADDR_L (IRDA_BASE + 0x08)
#define IR_RING_SIZE (IRDA_BASE + 0x0C)
#define IR_RING_PROMPT (IRDA_BASE + 0x10)
#define IR_RING_ADDR_CMPR (IRDA_BASE + 0x14)
#define IR_INT_CLEAR (IRDA_BASE + 0x18)
#define IR_CONFIG_1 (IRDA_BASE + 0x20)
# define IR_RX_INVERT_LED (1 << 0)
# define IR_TX_INVERT_LED (1 << 1)
# define IR_ST (1 << 2)
# define IR_SF (1 << 3)
# define IR_SIR (1 << 4)
# define IR_MIR (1 << 5)
# define IR_FIR (1 << 6)
# define IR_16CRC (1 << 7)
# define IR_TD (1 << 8)
# define IR_RX_ALL (1 << 9)
# define IR_DMA_ENABLE (1 << 10)
# define IR_RX_ENABLE (1 << 11)
# define IR_TX_ENABLE (1 << 12)
# define IR_LOOPBACK (1 << 14)
# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \
IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC)
#define IR_SIR_FLAGS (IRDA_BASE + 0x24)
#define IR_ENABLE (IRDA_BASE + 0x28)
# define IR_RX_STATUS (1 << 9)
# define IR_TX_STATUS (1 << 10)
#define IR_READ_PHY_CONFIG (IRDA_BASE + 0x2C)
#define IR_WRITE_PHY_CONFIG (IRDA_BASE + 0x30)
#define IR_MAX_PKT_LEN (IRDA_BASE + 0x34)
#define IR_RX_BYTE_CNT (IRDA_BASE + 0x38)
#define IR_CONFIG_2 (IRDA_BASE + 0x3C)
# define IR_MODE_INV (1 << 0)
# define IR_ONE_PIN (1 << 1)
#define IR_INTERFACE_CONFIG (IRDA_BASE + 0x40)
/* GPIO */
#define SYS_PINFUNC 0xB190002C
# define SYS_PF_USB (1 << 15) /* 2nd USB device/host */
# define SYS_PF_U3 (1 << 14) /* GPIO23/U3TXD */
# define SYS_PF_U2 (1 << 13) /* GPIO22/U2TXD */
# define SYS_PF_U1 (1 << 12) /* GPIO21/U1TXD */
# define SYS_PF_SRC (1 << 11) /* GPIO6/SROMCKE */
# define SYS_PF_CK5 (1 << 10) /* GPIO3/CLK5 */
# define SYS_PF_CK4 (1 << 9) /* GPIO2/CLK4 */
# define SYS_PF_IRF (1 << 8) /* GPIO15/IRFIRSEL */
# define SYS_PF_UR3 (1 << 7) /* GPIO[14:9]/UART3 */
# define SYS_PF_I2D (1 << 6) /* GPIO8/I2SDI */
# define SYS_PF_I2S (1 << 5) /* I2S/GPIO[29:31] */
# define SYS_PF_NI2 (1 << 4) /* NI2/GPIO[24:28] */
# define SYS_PF_U0 (1 << 3) /* U0TXD/GPIO20 */
# define SYS_PF_RD (1 << 2) /* IRTXD/GPIO19 */
# define SYS_PF_A97 (1 << 1) /* AC97/SSL1 */
# define SYS_PF_S0 (1 << 0) /* SSI_0/GPIO[16:18] */
/* Au1100 only */
# define SYS_PF_PC (1 << 18) /* PCMCIA/GPIO[207:204] */
# define SYS_PF_LCD (1 << 17) /* extern lcd/GPIO[203:200] */
# define SYS_PF_CS (1 << 16) /* EXTCLK0/32KHz to gpio2 */
# define SYS_PF_EX0 (1 << 9) /* GPIO2/clock */
/* Au1550 only. Redefines lots of pins */
# define SYS_PF_PSC2_MASK (7 << 17)
# define SYS_PF_PSC2_AC97 0
# define SYS_PF_PSC2_SPI 0
# define SYS_PF_PSC2_I2S (1 << 17)
# define SYS_PF_PSC2_SMBUS (3 << 17)
# define SYS_PF_PSC2_GPIO (7 << 17)
# define SYS_PF_PSC3_MASK (7 << 20)
# define SYS_PF_PSC3_AC97 0
# define SYS_PF_PSC3_SPI 0
# define SYS_PF_PSC3_I2S (1 << 20)
# define SYS_PF_PSC3_SMBUS (3 << 20)
# define SYS_PF_PSC3_GPIO (7 << 20)
# define SYS_PF_PSC1_S1 (1 << 1)
# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2))
/* Au1200 only */
#ifdef CONFIG_SOC_AU1200
#define SYS_PINFUNC_DMA (1 << 31)
#define SYS_PINFUNC_S0A (1 << 30)
#define SYS_PINFUNC_S1A (1 << 29)
#define SYS_PINFUNC_LP0 (1 << 28)
#define SYS_PINFUNC_LP1 (1 << 27)
#define SYS_PINFUNC_LD16 (1 << 26)
#define SYS_PINFUNC_LD8 (1 << 25)
#define SYS_PINFUNC_LD1 (1 << 24)
#define SYS_PINFUNC_LD0 (1 << 23)
#define SYS_PINFUNC_P1A (3 << 21)
#define SYS_PINFUNC_P1B (1 << 20)
#define SYS_PINFUNC_FS3 (1 << 19)
#define SYS_PINFUNC_P0A (3 << 17)
#define SYS_PINFUNC_CS (1 << 16)
#define SYS_PINFUNC_CIM (1 << 15)
#define SYS_PINFUNC_P1C (1 << 14)
#define SYS_PINFUNC_U1T (1 << 12)
#define SYS_PINFUNC_U1R (1 << 11)
#define SYS_PINFUNC_EX1 (1 << 10)
#define SYS_PINFUNC_EX0 (1 << 9)
#define SYS_PINFUNC_U0R (1 << 8)
#define SYS_PINFUNC_MC (1 << 7)
#define SYS_PINFUNC_S0B (1 << 6)
#define SYS_PINFUNC_S0C (1 << 5)
#define SYS_PINFUNC_P0B (1 << 4)
#define SYS_PINFUNC_U0T (1 << 3)
#define SYS_PINFUNC_S1B (1 << 2)
#endif
#define SYS_TRIOUTRD 0xB1900100
#define SYS_TRIOUTCLR 0xB1900100
#define SYS_OUTPUTRD 0xB1900108
#define SYS_OUTPUTSET 0xB1900108
#define SYS_OUTPUTCLR 0xB190010C
#define SYS_PINSTATERD 0xB1900110
#define SYS_PININPUTEN 0xB1900110
/* GPIO2, Au1500, Au1550 only */
#define GPIO2_BASE 0xB1700000
#define GPIO2_DIR (GPIO2_BASE + 0)
#define GPIO2_OUTPUT (GPIO2_BASE + 8)
#define GPIO2_PINSTATE (GPIO2_BASE + 0xC)
#define GPIO2_INTENABLE (GPIO2_BASE + 0x10)
#define GPIO2_ENABLE (GPIO2_BASE + 0x14)
/* Power Management */
#define SYS_SCRATCH0 0xB1900018
#define SYS_SCRATCH1 0xB190001C
#define SYS_WAKEMSK 0xB1900034
#define SYS_ENDIAN 0xB1900038
#define SYS_POWERCTRL 0xB190003C
#define SYS_WAKESRC 0xB190005C
#define SYS_SLPPWR 0xB1900078
#define SYS_SLEEP 0xB190007C
#define SYS_WAKEMSK_D2 (1 << 9)
#define SYS_WAKEMSK_M2 (1 << 8)
#define SYS_WAKEMSK_GPIO(x) (1 << (x))
/* Clock Controller */
#define SYS_FREQCTRL0 0xB1900020
# define SYS_FC_FRDIV2_BIT 22
# define SYS_FC_FRDIV2_MASK (0xff << SYS_FC_FRDIV2_BIT)
# define SYS_FC_FE2 (1 << 21)
# define SYS_FC_FS2 (1 << 20)
# define SYS_FC_FRDIV1_BIT 12
# define SYS_FC_FRDIV1_MASK (0xff << SYS_FC_FRDIV1_BIT)
# define SYS_FC_FE1 (1 << 11)
# define SYS_FC_FS1 (1 << 10)
# define SYS_FC_FRDIV0_BIT 2
# define SYS_FC_FRDIV0_MASK (0xff << SYS_FC_FRDIV0_BIT)
# define SYS_FC_FE0 (1 << 1)
# define SYS_FC_FS0 (1 << 0)
#define SYS_FREQCTRL1 0xB1900024
# define SYS_FC_FRDIV5_BIT 22
# define SYS_FC_FRDIV5_MASK (0xff << SYS_FC_FRDIV5_BIT)
# define SYS_FC_FE5 (1 << 21)
# define SYS_FC_FS5 (1 << 20)
# define SYS_FC_FRDIV4_BIT 12
# define SYS_FC_FRDIV4_MASK (0xff << SYS_FC_FRDIV4_BIT)
# define SYS_FC_FE4 (1 << 11)
# define SYS_FC_FS4 (1 << 10)
# define SYS_FC_FRDIV3_BIT 2
# define SYS_FC_FRDIV3_MASK (0xff << SYS_FC_FRDIV3_BIT)
# define SYS_FC_FE3 (1 << 1)
# define SYS_FC_FS3 (1 << 0)
#define SYS_CLKSRC 0xB1900028
# define SYS_CS_ME1_BIT 27
# define SYS_CS_ME1_MASK (0x7 << SYS_CS_ME1_BIT)
# define SYS_CS_DE1 (1 << 26)
# define SYS_CS_CE1 (1 << 25)
# define SYS_CS_ME0_BIT 22
# define SYS_CS_ME0_MASK (0x7 << SYS_CS_ME0_BIT)
# define SYS_CS_DE0 (1 << 21)
# define SYS_CS_CE0 (1 << 20)
# define SYS_CS_MI2_BIT 17
# define SYS_CS_MI2_MASK (0x7 << SYS_CS_MI2_BIT)
# define SYS_CS_DI2 (1 << 16)
# define SYS_CS_CI2 (1 << 15)
#ifdef CONFIG_SOC_AU1100
# define SYS_CS_ML_BIT 7
# define SYS_CS_ML_MASK (0x7 << SYS_CS_ML_BIT)
# define SYS_CS_DL (1 << 6)
# define SYS_CS_CL (1 << 5)
#else
# define SYS_CS_MUH_BIT 12
# define SYS_CS_MUH_MASK (0x7 << SYS_CS_MUH_BIT)
# define SYS_CS_DUH (1 << 11)
# define SYS_CS_CUH (1 << 10)
# define SYS_CS_MUD_BIT 7
# define SYS_CS_MUD_MASK (0x7 << SYS_CS_MUD_BIT)
# define SYS_CS_DUD (1 << 6)
# define SYS_CS_CUD (1 << 5)
#endif
# define SYS_CS_MIR_BIT 2
# define SYS_CS_MIR_MASK (0x7 << SYS_CS_MIR_BIT)
# define SYS_CS_DIR (1 << 1)
# define SYS_CS_CIR (1 << 0)
# define SYS_CS_MUX_AUX 0x1
# define SYS_CS_MUX_FQ0 0x2
# define SYS_CS_MUX_FQ1 0x3
# define SYS_CS_MUX_FQ2 0x4
# define SYS_CS_MUX_FQ3 0x5
# define SYS_CS_MUX_FQ4 0x6
# define SYS_CS_MUX_FQ5 0x7
#define SYS_CPUPLL 0xB1900060
#define SYS_AUXPLL 0xB1900064
/* AC97 Controller */
#define AC97C_CONFIG 0xB0000000
# define AC97C_RECV_SLOTS_BIT 13
# define AC97C_RECV_SLOTS_MASK (0x3ff << AC97C_RECV_SLOTS_BIT)
# define AC97C_XMIT_SLOTS_BIT 3
# define AC97C_XMIT_SLOTS_MASK (0x3ff << AC97C_XMIT_SLOTS_BIT)
# define AC97C_SG (1 << 2)
# define AC97C_SYNC (1 << 1)
# define AC97C_RESET (1 << 0)
#define AC97C_STATUS 0xB0000004
# define AC97C_XU (1 << 11)
# define AC97C_XO (1 << 10)
# define AC97C_RU (1 << 9)
# define AC97C_RO (1 << 8)
# define AC97C_READY (1 << 7)
# define AC97C_CP (1 << 6)
# define AC97C_TR (1 << 5)
# define AC97C_TE (1 << 4)
# define AC97C_TF (1 << 3)
# define AC97C_RR (1 << 2)
# define AC97C_RE (1 << 1)
# define AC97C_RF (1 << 0)
#define AC97C_DATA 0xB0000008
#define AC97C_CMD 0xB000000C
# define AC97C_WD_BIT 16
# define AC97C_READ (1 << 7)
# define AC97C_INDEX_MASK 0x7f
#define AC97C_CNTRL 0xB0000010
# define AC97C_RS (1 << 1)
# define AC97C_CE (1 << 0)
/* Secure Digital (SD) Controller */
#define SD0_XMIT_FIFO 0xB0600000
#define SD0_RECV_FIFO 0xB0600004
#define SD1_XMIT_FIFO 0xB0680000
#define SD1_RECV_FIFO 0xB0680004
#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
/* Au1500 PCI Controller */
#define Au1500_CFG_BASE 0xB4005000 /* virtual, KSEG1 addr */
#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0)
#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4)
# define PCI_ERROR ((1 << 22) | (1 << 23) | (1 << 24) | \
(1 << 25) | (1 << 26) | (1 << 27))
#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8)
#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC)
#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10)
#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14)
#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18)
#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C)
#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20)
#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100)
#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104)
#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108)
#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C)
#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110)
#define Au1500_PCI_HDR 0xB4005100 /* virtual, KSEG1 addr */
/*
* All of our structures, like PCI resource, have 32-bit members.
* Drivers are expected to do an ioremap on the PCI MEM resource, but it's
* hard to store 0x4 0000 0000 in a 32-bit type. We require a small patch
* to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and
* (u32)Au1500_PCI_MEM_END and change those to the full 36-bit PCI MEM
* addresses. For PCI I/O, it's simpler because we get to do the ioremap
* ourselves and then adjust the device's resources.
*/
#define Au1500_EXT_CFG 0x600000000ULL
#define Au1500_EXT_CFG_TYPE1 0x680000000ULL
#define Au1500_PCI_IO_START 0x500000000ULL
#define Au1500_PCI_IO_END 0x5000FFFFFULL
#define Au1500_PCI_MEM_START 0x440000000ULL
#define Au1500_PCI_MEM_END 0x44FFFFFFFULL
#define PCI_IO_START 0x00001000
#define PCI_IO_END 0x000FFFFF
#define PCI_MEM_START 0x40000000
#define PCI_MEM_END 0x4FFFFFFF
#define PCI_FIRST_DEVFN (0 << 3)
#define PCI_LAST_DEVFN (19 << 3)
#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */
#define IOPORT_RESOURCE_END 0xffffffff
#define IOMEM_RESOURCE_START 0x10000000
#define IOMEM_RESOURCE_END 0xfffffffffULL
#else /* Au1000 and Au1100 and Au1200 */
/* Don't allow any legacy ports probing */
#define IOPORT_RESOURCE_START 0x10000000
#define IOPORT_RESOURCE_END 0xffffffff
#define IOMEM_RESOURCE_START 0x10000000
#define IOMEM_RESOURCE_END 0xfffffffffULL
#define PCI_IO_START 0
#define PCI_IO_END 0
#define PCI_MEM_START 0
#define PCI_MEM_END 0
#define PCI_FIRST_DEVFN 0
#define PCI_LAST_DEVFN 0
#endif
#endif