arch/arm/mach-ixp2000/ixdp2800.c - kernel/msm - Gitiles

 /*
  * arch/arm/mach-ixp2000/ixdp2800.c
  *
  * IXDP2800 platform support
  *
  * Original Author: Jeffrey Daly <jeffrey.daly@intel.com>
  * Maintainer: Deepak Saxena <dsaxena@plexity.net>
  *
  * Copyright (C) 2002 Intel Corp.
  * Copyright (C) 2003-2004 MontaVista Software, Inc.
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/device.h>
 #include <linux/bitops.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
 #include <linux/slab.h>
 #include <linux/delay.h>

 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>

 #include <asm/mach/pci.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/arch.h>

 /*************************************************************************
  * IXDP2800 timer tick
  *************************************************************************/

 static void __init ixdp2800_timer_init(void)
 {
 	ixp2000_init_time(50000000);
 }

 static struct sys_timer ixdp2800_timer = {
 	.init		= ixdp2800_timer_init,
 	.offset		= ixp2000_gettimeoffset,
 };

 /*************************************************************************
  * IXDP2800 PCI
  *************************************************************************/
 static void __init ixdp2800_slave_disable_pci_master(void)
 {
 	*IXP2000_PCI_CMDSTAT &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
 }

 static void __init ixdp2800_master_wait_for_slave(void)
 {
 	volatile u32 *addr;

 	printk(KERN_INFO "IXDP2800: waiting for slave NPU to configure "
 			 "its BAR sizes\n");

 	addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
 					PCI_BASE_ADDRESS_1);
 	do {
 		*addr = 0xffffffff;
 		cpu_relax();
 	} while (*addr != 0xfe000008);

 	addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
 					PCI_BASE_ADDRESS_2);
 	do {
 		*addr = 0xffffffff;
 		cpu_relax();
 	} while (*addr != 0xc0000008);

 	/*
 	 * Configure the slave's SDRAM BAR by hand.
 	 */
 	*addr = 0x40000008;
 }

 static void __init ixdp2800_slave_wait_for_master_enable(void)
 {
 	printk(KERN_INFO "IXDP2800: waiting for master NPU to enable us\n");

 	while ((*IXP2000_PCI_CMDSTAT & PCI_COMMAND_MASTER) == 0)
 		cpu_relax();
 }

 void __init ixdp2800_pci_preinit(void)
 {
 	printk("ixdp2x00_pci_preinit called\n");

 	*IXP2000_PCI_ADDR_EXT = 0x0001e000;

 	if (!ixdp2x00_master_npu())
 		ixdp2800_slave_disable_pci_master();

 	*IXP2000_PCI_SRAM_BASE_ADDR_MASK = (0x2000000 - 1) & ~0x3ffff;
 	*IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff;

 	ixp2000_pci_preinit();

 	if (ixdp2x00_master_npu()) {
 		/*
 		 * Wait until the slave set its SRAM/SDRAM BAR sizes
 		 * correctly before we proceed to scan and enumerate
 		 * the bus.
 		 */
 		ixdp2800_master_wait_for_slave();

 		/*
 		 * We configure the SDRAM BARs by hand because they
 		 * are 1G and fall outside of the regular allocated
 		 * PCI address space.
 		 */
 		*IXP2000_PCI_SDRAM_BAR = 0x00000008;
 	} else {
 		/*
 		 * Wait for the master to complete scanning the bus
 		 * and assigning resources before we proceed to scan
 		 * the bus ourselves.  Set pci=firmware to honor the
 		 * master's resource assignment.
 		 */
 		ixdp2800_slave_wait_for_master_enable();
 		pcibios_setup("firmware");
 	}
 }

 /*
  * We assign the SDRAM BARs for the two IXP2800 CPUs by hand, outside
  * of the regular PCI window, because there's only 512M of outbound PCI
  * memory window on each IXP, while we need 1G for each of the BARs.
  */
 static void __devinit ixp2800_pci_fixup(struct pci_dev *dev)
 {
 	if (machine_is_ixdp2800()) {
 		dev->resource[2].start = 0;
 		dev->resource[2].end   = 0;
 		dev->resource[2].flags = 0;
 	}
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IXP2800, ixp2800_pci_fixup);

 static int __init ixdp2800_pci_setup(int nr, struct pci_sys_data *sys)
 {
 	sys->mem_offset = 0x00000000;

 	ixp2000_pci_setup(nr, sys);

 	return 1;
 }

 static int __init ixdp2800_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (ixdp2x00_master_npu()) {

 		/*
 		 * Root bus devices.  Slave NPU is only one with interrupt.
 		 * Everything else, we just return -1 which is invalid.
 		 */
 		if(!dev->bus->self) {
 			if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN )
 				return IRQ_IXDP2800_INGRESS_NPU;

 			return -1;
 		}

 		/*
 		 * Bridge behind the PMC slot.
 		 */
 		if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN &&
 			dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN &&
 			!dev->bus->parent->self->bus->parent)
 				  return IRQ_IXDP2800_PMC;

 		/*
 		 * Device behind the first bridge
 		 */
 		if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) {
 			switch(dev->devfn) {
 				case IXDP2X00_PMC_DEVFN:
 					return IRQ_IXDP2800_PMC;

 				case IXDP2800_MASTER_ENET_DEVFN:
 					return IRQ_IXDP2800_EGRESS_ENET;

 				case IXDP2800_SWITCH_FABRIC_DEVFN:
 					return IRQ_IXDP2800_FABRIC;
 			}
 		}

 		return -1;
 	} else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */
 }

 static void __init ixdp2800_master_enable_slave(void)
 {
 	volatile u32 *addr;

 	printk(KERN_INFO "IXDP2800: enabling slave NPU\n");

 	addr = (volatile u32 *)ixp2000_pci_config_addr(0,
 					IXDP2X00_SLAVE_NPU_DEVFN,
 					PCI_COMMAND);

 	*addr |= PCI_COMMAND_MASTER;
 }

 static void __init ixdp2800_master_wait_for_slave_bus_scan(void)
 {
 	volatile u32 *addr;

 	printk(KERN_INFO "IXDP2800: waiting for slave to finish bus scan\n");

 	addr = (volatile u32 *)ixp2000_pci_config_addr(0,
 					IXDP2X00_SLAVE_NPU_DEVFN,
 					PCI_COMMAND);
 	while ((*addr & PCI_COMMAND_MEMORY) == 0)
 		cpu_relax();
 }

 static void __init ixdp2800_slave_signal_bus_scan_completion(void)
 {
 	printk(KERN_INFO "IXDP2800: bus scan done, signaling master\n");
 	*IXP2000_PCI_CMDSTAT |= PCI_COMMAND_MEMORY;
 }

 static void __init ixdp2800_pci_postinit(void)
 {
 	if (!ixdp2x00_master_npu()) {
 		ixdp2x00_slave_pci_postinit();
 		ixdp2800_slave_signal_bus_scan_completion();
 	}
 }

 struct __initdata hw_pci ixdp2800_pci __initdata = {
 	.nr_controllers	= 1,
 	.setup		= ixdp2800_pci_setup,
 	.preinit	= ixdp2800_pci_preinit,
 	.postinit	= ixdp2800_pci_postinit,
 	.scan		= ixp2000_pci_scan_bus,
 	.map_irq	= ixdp2800_pci_map_irq,
 };

 int __init ixdp2800_pci_init(void)
 {
 	if (machine_is_ixdp2800()) {
 		struct pci_dev *dev;

 		pci_common_init(&ixdp2800_pci);
 		if (ixdp2x00_master_npu()) {
 			dev = pci_get_bus_and_slot(1, IXDP2800_SLAVE_ENET_DEVFN);
 			pci_remove_bus_device(dev);
 			pci_dev_put(dev);

 			ixdp2800_master_enable_slave();
 			ixdp2800_master_wait_for_slave_bus_scan();
 		} else {
 			dev = pci_get_bus_and_slot(1, IXDP2800_MASTER_ENET_DEVFN);
 			pci_remove_bus_device(dev);
 			pci_dev_put(dev);
 		}
 	}

 	return 0;
 }

 subsys_initcall(ixdp2800_pci_init);

 void __init ixdp2800_init_irq(void)
 {
 	ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2800_NR_IRQS);
 }

 MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
 	.phys_io	= IXP2000_UART_PHYS_BASE,
 	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= ixdp2x00_map_io,
 	.init_irq	= ixdp2800_init_irq,
 	.timer		= &ixdp2800_timer,
 	.init_machine	= ixdp2x00_init_machine,
 MACHINE_END
	/*
	* arch/arm/mach-ixp2000/ixdp2800.c
	*
	* IXDP2800 platform support
	*
	* Original Author: Jeffrey Daly <jeffrey.daly@intel.com>
	* Maintainer: Deepak Saxena <dsaxena@plexity.net>
	*
	* Copyright (C) 2002 Intel Corp.
	* Copyright (C) 2003-2004 MontaVista Software, Inc.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*/
	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/mm.h>
	#include <linux/sched.h>
	#include <linux/interrupt.h>
	#include <linux/device.h>
	#include <linux/bitops.h>
	#include <linux/pci.h>
	#include <linux/ioport.h>
	#include <linux/slab.h>
	#include <linux/delay.h>

	#include <asm/io.h>
	#include <asm/irq.h>
	#include <asm/pgtable.h>
	#include <asm/page.h>
	#include <asm/system.h>
	#include <mach/hardware.h>
	#include <asm/mach-types.h>

	#include <asm/mach/pci.h>
	#include <asm/mach/map.h>
	#include <asm/mach/irq.h>
	#include <asm/mach/time.h>
	#include <asm/mach/flash.h>
	#include <asm/mach/arch.h>

	/*************************************************************************
	* IXDP2800 timer tick
	*************************************************************************/

	static void __init ixdp2800_timer_init(void)
	{
	ixp2000_init_time(50000000);
	}

	static struct sys_timer ixdp2800_timer = {
	.init = ixdp2800_timer_init,
	.offset = ixp2000_gettimeoffset,
	};

	/*************************************************************************
	* IXDP2800 PCI
	*************************************************************************/
	static void __init ixdp2800_slave_disable_pci_master(void)
	{
	*IXP2000_PCI_CMDSTAT &= ~(PCI_COMMAND_MASTER \| PCI_COMMAND_MEMORY);
	}

	static void __init ixdp2800_master_wait_for_slave(void)
	{
	volatile u32 *addr;

	printk(KERN_INFO "IXDP2800: waiting for slave NPU to configure "
	"its BAR sizes\n");

	addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
	PCI_BASE_ADDRESS_1);
	do {
	*addr = 0xffffffff;
	cpu_relax();
	} while (*addr != 0xfe000008);

	addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
	PCI_BASE_ADDRESS_2);
	do {
	*addr = 0xffffffff;
	cpu_relax();
	} while (*addr != 0xc0000008);

	/*
	* Configure the slave's SDRAM BAR by hand.
	*/
	*addr = 0x40000008;
	}

	static void __init ixdp2800_slave_wait_for_master_enable(void)
	{
	printk(KERN_INFO "IXDP2800: waiting for master NPU to enable us\n");

	while ((*IXP2000_PCI_CMDSTAT & PCI_COMMAND_MASTER) == 0)
	cpu_relax();
	}

	void __init ixdp2800_pci_preinit(void)
	{
	printk("ixdp2x00_pci_preinit called\n");

	*IXP2000_PCI_ADDR_EXT = 0x0001e000;

	if (!ixdp2x00_master_npu())
	ixdp2800_slave_disable_pci_master();

	*IXP2000_PCI_SRAM_BASE_ADDR_MASK = (0x2000000 - 1) & ~0x3ffff;
	*IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff;

	ixp2000_pci_preinit();

	if (ixdp2x00_master_npu()) {
	/*
	* Wait until the slave set its SRAM/SDRAM BAR sizes
	* correctly before we proceed to scan and enumerate
	* the bus.
	*/
	ixdp2800_master_wait_for_slave();

	/*
	* We configure the SDRAM BARs by hand because they
	* are 1G and fall outside of the regular allocated
	* PCI address space.
	*/
	*IXP2000_PCI_SDRAM_BAR = 0x00000008;
	} else {
	/*
	* Wait for the master to complete scanning the bus
	* and assigning resources before we proceed to scan
	* the bus ourselves. Set pci=firmware to honor the
	* master's resource assignment.
	*/
	ixdp2800_slave_wait_for_master_enable();
	pcibios_setup("firmware");
	}
	}

	/*
	* We assign the SDRAM BARs for the two IXP2800 CPUs by hand, outside
	* of the regular PCI window, because there's only 512M of outbound PCI
	* memory window on each IXP, while we need 1G for each of the BARs.
	*/
	static void __devinit ixp2800_pci_fixup(struct pci_dev *dev)
	{
	if (machine_is_ixdp2800()) {
	dev->resource[2].start = 0;
	dev->resource[2].end = 0;
	dev->resource[2].flags = 0;
	}
	}
	DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IXP2800, ixp2800_pci_fixup);

	static int __init ixdp2800_pci_setup(int nr, struct pci_sys_data *sys)
	{
	sys->mem_offset = 0x00000000;

	ixp2000_pci_setup(nr, sys);

	return 1;
	}

	static int __init ixdp2800_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
	{
	if (ixdp2x00_master_npu()) {

	/*
	* Root bus devices. Slave NPU is only one with interrupt.
	* Everything else, we just return -1 which is invalid.
	*/
	if(!dev->bus->self) {
	if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN )
	return IRQ_IXDP2800_INGRESS_NPU;

	return -1;
	}

	/*
	* Bridge behind the PMC slot.
	*/
	if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN &&
	dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN &&
	!dev->bus->parent->self->bus->parent)
	return IRQ_IXDP2800_PMC;

	/*
	* Device behind the first bridge
	*/
	if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) {
	switch(dev->devfn) {
	case IXDP2X00_PMC_DEVFN:
	return IRQ_IXDP2800_PMC;

	case IXDP2800_MASTER_ENET_DEVFN:
	return IRQ_IXDP2800_EGRESS_ENET;

	case IXDP2800_SWITCH_FABRIC_DEVFN:
	return IRQ_IXDP2800_FABRIC;
	}
	}

	return -1;
	} else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */
	}

	static void __init ixdp2800_master_enable_slave(void)
	{
	volatile u32 *addr;

	printk(KERN_INFO "IXDP2800: enabling slave NPU\n");

	addr = (volatile u32 *)ixp2000_pci_config_addr(0,
	IXDP2X00_SLAVE_NPU_DEVFN,
	PCI_COMMAND);

	*addr \|= PCI_COMMAND_MASTER;
	}

	static void __init ixdp2800_master_wait_for_slave_bus_scan(void)
	{
	volatile u32 *addr;

	printk(KERN_INFO "IXDP2800: waiting for slave to finish bus scan\n");

	addr = (volatile u32 *)ixp2000_pci_config_addr(0,
	IXDP2X00_SLAVE_NPU_DEVFN,
	PCI_COMMAND);
	while ((*addr & PCI_COMMAND_MEMORY) == 0)
	cpu_relax();
	}

	static void __init ixdp2800_slave_signal_bus_scan_completion(void)
	{
	printk(KERN_INFO "IXDP2800: bus scan done, signaling master\n");
	*IXP2000_PCI_CMDSTAT \|= PCI_COMMAND_MEMORY;
	}

	static void __init ixdp2800_pci_postinit(void)
	{
	if (!ixdp2x00_master_npu()) {
	ixdp2x00_slave_pci_postinit();
	ixdp2800_slave_signal_bus_scan_completion();
	}
	}

	struct __initdata hw_pci ixdp2800_pci __initdata = {
	.nr_controllers = 1,
	.setup = ixdp2800_pci_setup,
	.preinit = ixdp2800_pci_preinit,
	.postinit = ixdp2800_pci_postinit,
	.scan = ixp2000_pci_scan_bus,
	.map_irq = ixdp2800_pci_map_irq,
	};

	int __init ixdp2800_pci_init(void)
	{
	if (machine_is_ixdp2800()) {
	struct pci_dev *dev;

	pci_common_init(&ixdp2800_pci);
	if (ixdp2x00_master_npu()) {
	dev = pci_get_bus_and_slot(1, IXDP2800_SLAVE_ENET_DEVFN);
	pci_remove_bus_device(dev);
	pci_dev_put(dev);

	ixdp2800_master_enable_slave();
	ixdp2800_master_wait_for_slave_bus_scan();
	} else {
	dev = pci_get_bus_and_slot(1, IXDP2800_MASTER_ENET_DEVFN);
	pci_remove_bus_device(dev);
	pci_dev_put(dev);
	}
	}

	return 0;
	}

	subsys_initcall(ixdp2800_pci_init);

	void __init ixdp2800_init_irq(void)
	{
	ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2800_NR_IRQS);
	}

	MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
	/* Maintainer: MontaVista Software, Inc. */
	.phys_io = IXP2000_UART_PHYS_BASE,
	.io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
	.boot_params = 0x00000100,
	.map_io = ixdp2x00_map_io,
	.init_irq = ixdp2800_init_irq,
	.timer = &ixdp2800_timer,
	.init_machine = ixdp2x00_init_machine,
	MACHINE_END