| /* |
| * linux/arch/arm/mach-pxa/colibri.c |
| * |
| * Support for Toradex PXA27x based Colibri module |
| * Daniel Mack <daniel@caiaq.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/sysdev.h> |
| #include <linux/interrupt.h> |
| #include <linux/bitops.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/mtd/physmap.h> |
| #include <asm/mach-types.h> |
| #include <mach/hardware.h> |
| #include <asm/irq.h> |
| #include <asm/sizes.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/irq.h> |
| #include <asm/mach/flash.h> |
| #include <mach/pxa-regs.h> |
| #include <mach/pxa2xx-gpio.h> |
| #include <mach/colibri.h> |
| |
| #include "generic.h" |
| #include "devices.h" |
| |
| /* |
| * Flash |
| */ |
| static struct mtd_partition colibri_partitions[] = { |
| { |
| .name = "Bootloader", |
| .offset = 0x00000000, |
| .size = 0x00040000, |
| .mask_flags = MTD_WRITEABLE /* force read-only */ |
| }, { |
| .name = "Kernel", |
| .offset = 0x00040000, |
| .size = 0x00400000, |
| .mask_flags = 0 |
| }, { |
| .name = "Rootfs", |
| .offset = 0x00440000, |
| .size = MTDPART_SIZ_FULL, |
| .mask_flags = 0 |
| } |
| }; |
| |
| static struct physmap_flash_data colibri_flash_data[] = { |
| { |
| .width = 4, /* bankwidth in bytes */ |
| .parts = colibri_partitions, |
| .nr_parts = ARRAY_SIZE(colibri_partitions) |
| } |
| }; |
| |
| static struct resource flash_resource = { |
| .start = PXA_CS0_PHYS, |
| .end = PXA_CS0_PHYS + SZ_32M - 1, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| static struct platform_device flash_device = { |
| .name = "physmap-flash", |
| .id = 0, |
| .dev = { |
| .platform_data = colibri_flash_data, |
| }, |
| .resource = &flash_resource, |
| .num_resources = 1, |
| }; |
| |
| /* |
| * DM9000 Ethernet |
| */ |
| static struct resource dm9000_resources[] = { |
| [0] = { |
| .start = COLIBRI_ETH_PHYS, |
| .end = COLIBRI_ETH_PHYS + 3, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = COLIBRI_ETH_PHYS + 4, |
| .end = COLIBRI_ETH_PHYS + 4 + 500, |
| .flags = IORESOURCE_MEM, |
| }, |
| [2] = { |
| .start = COLIBRI_ETH_IRQ, |
| .end = COLIBRI_ETH_IRQ, |
| .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING, |
| }, |
| }; |
| |
| static struct platform_device dm9000_device = { |
| .name = "dm9000", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(dm9000_resources), |
| .resource = dm9000_resources, |
| }; |
| |
| static struct platform_device *colibri_devices[] __initdata = { |
| &flash_device, |
| &dm9000_device, |
| }; |
| |
| static void __init colibri_init(void) |
| { |
| /* DM9000 LAN */ |
| pxa_gpio_mode(GPIO78_nCS_2_MD); |
| pxa_gpio_mode(GPIO_DM9000 | GPIO_IN); |
| |
| platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices)); |
| } |
| |
| MACHINE_START(COLIBRI, "Toradex Colibri PXA27x") |
| .phys_io = 0x40000000, |
| .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, |
| .boot_params = COLIBRI_SDRAM_BASE + 0x100, |
| .init_machine = colibri_init, |
| .map_io = pxa_map_io, |
| .init_irq = pxa27x_init_irq, |
| .timer = &pxa_timer, |
| MACHINE_END |