drm/mode: get the modeline for standard timing in EDID by using CVT/GTF
Create the standard timing modeline by using CVT/GFT algorithm while
interpreting the EDID.
In course of interpreting the EDID, the timing level will be obtained,
which is used to determine whether the CVT/GTF algorithm is selected to
generate the modeline for the given hdisplay/vdisplay/vrefresh_rate.
In the UMS mode firstly it will check whether it can be found in
the DMT table. If it can be found, then the modeline is returned. Then the
timing_level is used to choose CVT/GTF.
As there is no DMT table, no modeline is returned when timing level
is DMT. For the other two timing levels, the CVT/GTF will be called to
generate the required standard timing modeline.
[airlied: fixed up conflicts since EDID rework]
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 80cc6d0..bbcb2e2 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -61,6 +61,10 @@
/* use +hsync +vsync for detailed mode */
#define EDID_QUIRK_DETAILED_SYNC_PP (1 << 6)
+#define LEVEL_DMT 0
+#define LEVEL_GTF 1
+#define LEVEL_CVT 2
+
static struct edid_quirk {
char *vendor;
int product_id;
@@ -240,25 +244,31 @@
/**
* drm_mode_std - convert standard mode info (width, height, refresh) into mode
* @t: standard timing params
+ * @timing_level: standard timing level
*
* Take the standard timing params (in this case width, aspect, and refresh)
- * and convert them into a real mode using CVT.
+ * and convert them into a real mode using CVT/GTF/DMT.
*
* Punts for now, but should eventually use the FB layer's CVT based mode
* generation code.
*/
struct drm_display_mode *drm_mode_std(struct drm_device *dev,
- struct std_timing *t)
+ struct std_timing *t,
+ int timing_level)
{
struct drm_display_mode *mode;
- int hsize = t->hsize * 8 + 248, vsize;
+ int hsize, vsize;
+ int vrefresh_rate;
unsigned aspect_ratio = (t->vfreq_aspect & EDID_TIMING_ASPECT_MASK)
>> EDID_TIMING_ASPECT_SHIFT;
+ unsigned vfreq = (t->vfreq_aspect & EDID_TIMING_VFREQ_MASK)
+ >> EDID_TIMING_VFREQ_SHIFT;
- mode = drm_mode_create(dev);
- if (!mode)
- return NULL;
-
+ /* According to the EDID spec, the hdisplay = hsize * 8 + 248 */
+ hsize = t->hsize * 8 + 248;
+ /* vrefresh_rate = vfreq + 60 */
+ vrefresh_rate = vfreq + 60;
+ /* the vdisplay is calculated based on the aspect ratio */
if (aspect_ratio == 0)
vsize = (hsize * 10) / 16;
else if (aspect_ratio == 1)
@@ -268,8 +278,23 @@
else
vsize = (hsize * 9) / 16;
- drm_mode_set_name(mode);
-
+ mode = NULL;
+ switch (timing_level) {
+ case LEVEL_DMT:
+ mode = drm_mode_create(dev);
+ if (mode) {
+ mode->hdisplay = hsize;
+ mode->vdisplay = vsize;
+ drm_mode_set_name(mode);
+ }
+ break;
+ case LEVEL_GTF:
+ mode = drm_gtf_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
+ break;
+ case LEVEL_CVT:
+ mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
+ break;
+ }
return mode;
}
@@ -451,6 +476,19 @@
return modes;
}
+/**
+ * stanard_timing_level - get std. timing level(CVT/GTF/DMT)
+ * @edid: EDID block to scan
+ */
+static int standard_timing_level(struct edid *edid)
+{
+ if (edid->revision >= 2) {
+ if (edid->revision >= 4 && (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF))
+ return LEVEL_CVT;
+ return LEVEL_GTF;
+ }
+ return LEVEL_DMT;
+}
/**
* add_standard_modes - get std. modes from EDID and add them
@@ -463,6 +501,9 @@
{
struct drm_device *dev = connector->dev;
int i, modes = 0;
+ int timing_level;
+
+ timing_level = standard_timing_level(edid);
for (i = 0; i < EDID_STD_TIMINGS; i++) {
struct std_timing *t = &edid->standard_timings[i];
@@ -472,7 +513,8 @@
if (t->hsize == 1 && t->vfreq_aspect == 1)
continue;
- newmode = drm_mode_std(dev, &edid->standard_timings[i]);
+ newmode = drm_mode_std(dev, &edid->standard_timings[i],
+ timing_level);
if (newmode) {
drm_mode_probed_add(connector, newmode);
modes++;
@@ -496,6 +538,9 @@
{
struct drm_device *dev = connector->dev;
int i, j, modes = 0;
+ int timing_level;
+
+ timing_level = standard_timing_level(edid);
for (i = 0; i < EDID_DETAILED_TIMINGS; i++) {
struct detailed_timing *timing = &edid->detailed_timings[i];
@@ -541,7 +586,8 @@
struct drm_display_mode *newmode;
std = &data->data.timings[j];
- newmode = drm_mode_std(dev, std);
+ newmode = drm_mode_std(dev, std,
+ timing_level);
if (newmode) {
drm_mode_probed_add(connector, newmode);
modes++;