| /* |
| * xHCI host controller driver PCI Bus Glue. |
| * |
| * Copyright (C) 2008 Intel Corp. |
| * |
| * Author: Sarah Sharp |
| * Some code borrowed from the Linux EHCI driver. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| |
| #include "xhci.h" |
| |
| /* Device for a quirk */ |
| #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 |
| #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 |
| |
| #define PCI_VENDOR_ID_ETRON 0x1b6f |
| #define PCI_DEVICE_ID_ASROCK_P67 0x7023 |
| |
| static const char hcd_name[] = "xhci_hcd"; |
| |
| /* called after powerup, by probe or system-pm "wakeup" */ |
| static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev) |
| { |
| /* |
| * TODO: Implement finding debug ports later. |
| * TODO: see if there are any quirks that need to be added to handle |
| * new extended capabilities. |
| */ |
| |
| /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */ |
| if (!pci_set_mwi(pdev)) |
| xhci_dbg(xhci, "MWI active\n"); |
| |
| xhci_dbg(xhci, "Finished xhci_pci_reinit\n"); |
| return 0; |
| } |
| |
| /* called during probe() after chip reset completes */ |
| static int xhci_pci_setup(struct usb_hcd *hcd) |
| { |
| struct xhci_hcd *xhci; |
| struct pci_dev *pdev = to_pci_dev(hcd->self.controller); |
| int retval; |
| u32 temp; |
| |
| hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2; |
| |
| if (usb_hcd_is_primary_hcd(hcd)) { |
| xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL); |
| if (!xhci) |
| return -ENOMEM; |
| *((struct xhci_hcd **) hcd->hcd_priv) = xhci; |
| xhci->main_hcd = hcd; |
| /* Mark the first roothub as being USB 2.0. |
| * The xHCI driver will register the USB 3.0 roothub. |
| */ |
| hcd->speed = HCD_USB2; |
| hcd->self.root_hub->speed = USB_SPEED_HIGH; |
| /* |
| * USB 2.0 roothub under xHCI has an integrated TT, |
| * (rate matching hub) as opposed to having an OHCI/UHCI |
| * companion controller. |
| */ |
| hcd->has_tt = 1; |
| } else { |
| /* xHCI private pointer was set in xhci_pci_probe for the second |
| * registered roothub. |
| */ |
| xhci = hcd_to_xhci(hcd); |
| temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params); |
| if (HCC_64BIT_ADDR(temp)) { |
| xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n"); |
| dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)); |
| } else { |
| dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32)); |
| } |
| return 0; |
| } |
| |
| xhci->cap_regs = hcd->regs; |
| xhci->op_regs = hcd->regs + |
| HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase)); |
| xhci->run_regs = hcd->regs + |
| (xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK); |
| /* Cache read-only capability registers */ |
| xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1); |
| xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2); |
| xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3); |
| xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hc_capbase); |
| xhci->hci_version = HC_VERSION(xhci->hcc_params); |
| xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params); |
| xhci_print_registers(xhci); |
| |
| /* Look for vendor-specific quirks */ |
| if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && |
| pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) { |
| if (pdev->revision == 0x0) { |
| xhci->quirks |= XHCI_RESET_EP_QUIRK; |
| xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure" |
| " endpoint cmd after reset endpoint\n"); |
| } |
| /* Fresco Logic confirms: all revisions of this chip do not |
| * support MSI, even though some of them claim to in their PCI |
| * capabilities. |
| */ |
| xhci->quirks |= XHCI_BROKEN_MSI; |
| xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u " |
| "has broken MSI implementation\n", |
| pdev->revision); |
| } |
| |
| if (pdev->vendor == PCI_VENDOR_ID_NEC) |
| xhci->quirks |= XHCI_NEC_HOST; |
| |
| if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) |
| xhci->quirks |= XHCI_AMD_0x96_HOST; |
| |
| /* AMD PLL quirk */ |
| if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info()) |
| xhci->quirks |= XHCI_AMD_PLL_FIX; |
| if (pdev->vendor == PCI_VENDOR_ID_INTEL && |
| pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) { |
| xhci->quirks |= XHCI_SPURIOUS_SUCCESS; |
| xhci->quirks |= XHCI_EP_LIMIT_QUIRK; |
| xhci->limit_active_eps = 64; |
| } |
| if (pdev->vendor == PCI_VENDOR_ID_ETRON && |
| pdev->device == PCI_DEVICE_ID_ASROCK_P67) { |
| xhci->quirks |= XHCI_RESET_ON_RESUME; |
| xhci_dbg(xhci, "QUIRK: Resetting on resume\n"); |
| } |
| |
| /* Make sure the HC is halted. */ |
| retval = xhci_halt(xhci); |
| if (retval) |
| goto error; |
| |
| xhci_dbg(xhci, "Resetting HCD\n"); |
| /* Reset the internal HC memory state and registers. */ |
| retval = xhci_reset(xhci); |
| if (retval) |
| goto error; |
| xhci_dbg(xhci, "Reset complete\n"); |
| |
| temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params); |
| if (HCC_64BIT_ADDR(temp)) { |
| xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n"); |
| dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)); |
| } else { |
| dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32)); |
| } |
| |
| xhci_dbg(xhci, "Calling HCD init\n"); |
| /* Initialize HCD and host controller data structures. */ |
| retval = xhci_init(hcd); |
| if (retval) |
| goto error; |
| xhci_dbg(xhci, "Called HCD init\n"); |
| |
| pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn); |
| xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn); |
| |
| /* Find any debug ports */ |
| retval = xhci_pci_reinit(xhci, pdev); |
| if (!retval) |
| return retval; |
| |
| error: |
| kfree(xhci); |
| return retval; |
| } |
| |
| /* |
| * We need to register our own PCI probe function (instead of the USB core's |
| * function) in order to create a second roothub under xHCI. |
| */ |
| static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) |
| { |
| int retval; |
| struct xhci_hcd *xhci; |
| struct hc_driver *driver; |
| struct usb_hcd *hcd; |
| |
| driver = (struct hc_driver *)id->driver_data; |
| /* Register the USB 2.0 roothub. |
| * FIXME: USB core must know to register the USB 2.0 roothub first. |
| * This is sort of silly, because we could just set the HCD driver flags |
| * to say USB 2.0, but I'm not sure what the implications would be in |
| * the other parts of the HCD code. |
| */ |
| retval = usb_hcd_pci_probe(dev, id); |
| |
| if (retval) |
| return retval; |
| |
| /* USB 2.0 roothub is stored in the PCI device now. */ |
| hcd = dev_get_drvdata(&dev->dev); |
| xhci = hcd_to_xhci(hcd); |
| xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev, |
| pci_name(dev), hcd); |
| if (!xhci->shared_hcd) { |
| retval = -ENOMEM; |
| goto dealloc_usb2_hcd; |
| } |
| |
| /* Set the xHCI pointer before xhci_pci_setup() (aka hcd_driver.reset) |
| * is called by usb_add_hcd(). |
| */ |
| *((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci; |
| |
| retval = usb_add_hcd(xhci->shared_hcd, dev->irq, |
| IRQF_DISABLED | IRQF_SHARED); |
| if (retval) |
| goto put_usb3_hcd; |
| /* Roothub already marked as USB 3.0 speed */ |
| return 0; |
| |
| put_usb3_hcd: |
| usb_put_hcd(xhci->shared_hcd); |
| dealloc_usb2_hcd: |
| usb_hcd_pci_remove(dev); |
| return retval; |
| } |
| |
| static void xhci_pci_remove(struct pci_dev *dev) |
| { |
| struct xhci_hcd *xhci; |
| |
| xhci = hcd_to_xhci(pci_get_drvdata(dev)); |
| if (xhci->shared_hcd) { |
| usb_remove_hcd(xhci->shared_hcd); |
| usb_put_hcd(xhci->shared_hcd); |
| } |
| usb_hcd_pci_remove(dev); |
| kfree(xhci); |
| } |
| |
| #ifdef CONFIG_PM |
| static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) |
| { |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| int retval = 0; |
| |
| if (hcd->state != HC_STATE_SUSPENDED || |
| xhci->shared_hcd->state != HC_STATE_SUSPENDED) |
| return -EINVAL; |
| |
| retval = xhci_suspend(xhci); |
| |
| return retval; |
| } |
| |
| static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) |
| { |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| struct pci_dev *pdev = to_pci_dev(hcd->self.controller); |
| int retval = 0; |
| |
| /* The BIOS on systems with the Intel Panther Point chipset may or may |
| * not support xHCI natively. That means that during system resume, it |
| * may switch the ports back to EHCI so that users can use their |
| * keyboard to select a kernel from GRUB after resume from hibernate. |
| * |
| * The BIOS is supposed to remember whether the OS had xHCI ports |
| * enabled before resume, and switch the ports back to xHCI when the |
| * BIOS/OS semaphore is written, but we all know we can't trust BIOS |
| * writers. |
| * |
| * Unconditionally switch the ports back to xHCI after a system resume. |
| * We can't tell whether the EHCI or xHCI controller will be resumed |
| * first, so we have to do the port switchover in both drivers. Writing |
| * a '1' to the port switchover registers should have no effect if the |
| * port was already switched over. |
| */ |
| if (usb_is_intel_switchable_xhci(pdev)) |
| usb_enable_xhci_ports(pdev); |
| |
| retval = xhci_resume(xhci, hibernated); |
| return retval; |
| } |
| #endif /* CONFIG_PM */ |
| |
| static const struct hc_driver xhci_pci_hc_driver = { |
| .description = hcd_name, |
| .product_desc = "xHCI Host Controller", |
| .hcd_priv_size = sizeof(struct xhci_hcd *), |
| |
| /* |
| * generic hardware linkage |
| */ |
| .irq = xhci_irq, |
| .flags = HCD_MEMORY | HCD_USB3 | HCD_SHARED, |
| |
| /* |
| * basic lifecycle operations |
| */ |
| .reset = xhci_pci_setup, |
| .start = xhci_run, |
| #ifdef CONFIG_PM |
| .pci_suspend = xhci_pci_suspend, |
| .pci_resume = xhci_pci_resume, |
| #endif |
| .stop = xhci_stop, |
| .shutdown = xhci_shutdown, |
| |
| /* |
| * managing i/o requests and associated device resources |
| */ |
| .urb_enqueue = xhci_urb_enqueue, |
| .urb_dequeue = xhci_urb_dequeue, |
| .alloc_dev = xhci_alloc_dev, |
| .free_dev = xhci_free_dev, |
| .alloc_streams = xhci_alloc_streams, |
| .free_streams = xhci_free_streams, |
| .add_endpoint = xhci_add_endpoint, |
| .drop_endpoint = xhci_drop_endpoint, |
| .endpoint_reset = xhci_endpoint_reset, |
| .check_bandwidth = xhci_check_bandwidth, |
| .reset_bandwidth = xhci_reset_bandwidth, |
| .address_device = xhci_address_device, |
| .update_hub_device = xhci_update_hub_device, |
| .reset_device = xhci_discover_or_reset_device, |
| |
| /* |
| * scheduling support |
| */ |
| .get_frame_number = xhci_get_frame, |
| |
| /* Root hub support */ |
| .hub_control = xhci_hub_control, |
| .hub_status_data = xhci_hub_status_data, |
| .bus_suspend = xhci_bus_suspend, |
| .bus_resume = xhci_bus_resume, |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* PCI driver selection metadata; PCI hotplugging uses this */ |
| static const struct pci_device_id pci_ids[] = { { |
| /* handle any USB 3.0 xHCI controller */ |
| PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0), |
| .driver_data = (unsigned long) &xhci_pci_hc_driver, |
| }, |
| { /* end: all zeroes */ } |
| }; |
| MODULE_DEVICE_TABLE(pci, pci_ids); |
| |
| /* pci driver glue; this is a "new style" PCI driver module */ |
| static struct pci_driver xhci_pci_driver = { |
| .name = (char *) hcd_name, |
| .id_table = pci_ids, |
| |
| .probe = xhci_pci_probe, |
| .remove = xhci_pci_remove, |
| /* suspend and resume implemented later */ |
| |
| .shutdown = usb_hcd_pci_shutdown, |
| #ifdef CONFIG_PM_SLEEP |
| .driver = { |
| .pm = &usb_hcd_pci_pm_ops |
| }, |
| #endif |
| }; |
| |
| int xhci_register_pci(void) |
| { |
| return pci_register_driver(&xhci_pci_driver); |
| } |
| |
| void xhci_unregister_pci(void) |
| { |
| pci_unregister_driver(&xhci_pci_driver); |
| } |