| /* Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/workqueue.h> |
| #include <linux/interrupt.h> |
| |
| #include <mach/subsystem_restart.h> |
| #include <mach/scm.h> |
| |
| #include "ramdump.h" |
| #include "peripheral-loader.h" |
| #include "scm-pas.h" |
| |
| #define QDSP6SS_RST_EVB 0x0000 |
| #define QDSP6SS_STRAP_TCM 0x001C |
| #define QDSP6SS_STRAP_AHB 0x0020 |
| |
| #define LCC_Q6_FUNC 0x001C |
| #define LV_EN BIT(27) |
| #define STOP_CORE BIT(26) |
| #define CLAMP_IO BIT(25) |
| #define Q6SS_PRIV_ARES BIT(24) |
| #define Q6SS_SS_ARES BIT(23) |
| #define Q6SS_ISDB_ARES BIT(22) |
| #define Q6SS_ETM_ARES BIT(21) |
| #define Q6_JTAG_CRC_EN BIT(20) |
| #define Q6_JTAG_INV_EN BIT(19) |
| #define Q6_JTAG_CXC_EN BIT(18) |
| #define Q6_PXO_CRC_EN BIT(17) |
| #define Q6_PXO_INV_EN BIT(16) |
| #define Q6_PXO_CXC_EN BIT(15) |
| #define Q6_PXO_SLEEP_EN BIT(14) |
| #define Q6_SLP_CRC_EN BIT(13) |
| #define Q6_SLP_INV_EN BIT(12) |
| #define Q6_SLP_CXC_EN BIT(11) |
| #define CORE_ARES BIT(10) |
| #define CORE_L1_MEM_CORE_EN BIT(9) |
| #define CORE_TCM_MEM_CORE_EN BIT(8) |
| #define CORE_TCM_MEM_PERPH_EN BIT(7) |
| #define CORE_GFM4_CLK_EN BIT(2) |
| #define CORE_GFM4_RES BIT(1) |
| #define RAMP_PLL_SRC_SEL BIT(0) |
| |
| #define Q6_STRAP_AHB_UPPER (0x290 << 12) |
| #define Q6_STRAP_AHB_LOWER 0x280 |
| #define Q6_STRAP_TCM_BASE (0x28C << 15) |
| #define Q6_STRAP_TCM_CONFIG 0x28B |
| |
| #define SCM_Q6_NMI_CMD 0x1 |
| |
| /** |
| * struct q6v3_data - LPASS driver data |
| * @base: register base |
| * @cbase: clock base |
| * @wk_base: wakeup register base |
| * @wd_base: watchdog register base |
| * @irq: watchdog irq |
| * @pil: peripheral handle |
| * @subsys: subsystem restart handle |
| * @subsys_desc: subsystem restart descriptor |
| * @fatal_wrk: fatal error workqueue |
| * @pll: pll clock handle |
| * @ramdump_dev: ramdump device |
| */ |
| struct q6v3_data { |
| void __iomem *base; |
| void __iomem *cbase; |
| void __iomem *wk_base; |
| void __iomem *wd_base; |
| int irq; |
| struct pil_desc pil_desc; |
| struct subsys_device *subsys; |
| struct subsys_desc subsys_desc; |
| struct work_struct fatal_wrk; |
| struct clk *pll; |
| struct ramdump_device *ramdump_dev; |
| }; |
| |
| static void pil_q6v3_remove_proxy_votes(struct pil_desc *pil) |
| { |
| struct q6v3_data *drv = dev_get_drvdata(pil->dev); |
| clk_disable_unprepare(drv->pll); |
| } |
| |
| static int pil_q6v3_make_proxy_votes(struct pil_desc *pil) |
| { |
| int ret; |
| struct q6v3_data *drv = dev_get_drvdata(pil->dev); |
| |
| ret = clk_prepare_enable(drv->pll); |
| if (ret) { |
| dev_err(pil->dev, "Failed to enable PLL\n"); |
| return ret; |
| } |
| return 0; |
| } |
| |
| static int pil_q6v3_reset(struct pil_desc *pil) |
| { |
| u32 reg; |
| struct q6v3_data *drv = dev_get_drvdata(pil->dev); |
| unsigned long start_addr = pil_get_entry_addr(pil); |
| |
| /* Put Q6 into reset */ |
| reg = readl_relaxed(drv->cbase + LCC_Q6_FUNC); |
| reg |= Q6SS_SS_ARES | Q6SS_ISDB_ARES | Q6SS_ETM_ARES | STOP_CORE | |
| CORE_ARES; |
| reg &= ~CORE_GFM4_CLK_EN; |
| writel_relaxed(reg, drv->cbase + LCC_Q6_FUNC); |
| |
| /* Wait 8 AHB cycles for Q6 to be fully reset (AHB = 1.5Mhz) */ |
| usleep_range(20, 30); |
| |
| /* Turn on Q6 memory */ |
| reg |= CORE_GFM4_CLK_EN | CORE_L1_MEM_CORE_EN | CORE_TCM_MEM_CORE_EN | |
| CORE_TCM_MEM_PERPH_EN; |
| writel_relaxed(reg, drv->cbase + LCC_Q6_FUNC); |
| |
| /* Turn on Q6 core clocks and take core out of reset */ |
| reg &= ~(CLAMP_IO | Q6SS_SS_ARES | Q6SS_ISDB_ARES | Q6SS_ETM_ARES | |
| CORE_ARES); |
| writel_relaxed(reg, drv->cbase + LCC_Q6_FUNC); |
| |
| /* Wait for clocks to be enabled */ |
| mb(); |
| /* Program boot address */ |
| writel_relaxed((start_addr >> 12) & 0xFFFFF, |
| drv->base + QDSP6SS_RST_EVB); |
| |
| writel_relaxed(Q6_STRAP_TCM_CONFIG | Q6_STRAP_TCM_BASE, |
| drv->base + QDSP6SS_STRAP_TCM); |
| writel_relaxed(Q6_STRAP_AHB_UPPER | Q6_STRAP_AHB_LOWER, |
| drv->base + QDSP6SS_STRAP_AHB); |
| |
| /* Wait for addresses to be programmed before starting Q6 */ |
| mb(); |
| |
| /* Start Q6 instruction execution */ |
| reg &= ~STOP_CORE; |
| writel_relaxed(reg, drv->cbase + LCC_Q6_FUNC); |
| |
| return 0; |
| } |
| |
| static int pil_q6v3_shutdown(struct pil_desc *pil) |
| { |
| u32 reg; |
| struct q6v3_data *drv = dev_get_drvdata(pil->dev); |
| |
| /* Put Q6 into reset */ |
| reg = readl_relaxed(drv->cbase + LCC_Q6_FUNC); |
| reg |= Q6SS_SS_ARES | Q6SS_ISDB_ARES | Q6SS_ETM_ARES | STOP_CORE | |
| CORE_ARES; |
| reg &= ~CORE_GFM4_CLK_EN; |
| writel_relaxed(reg, drv->cbase + LCC_Q6_FUNC); |
| |
| /* Wait 8 AHB cycles for Q6 to be fully reset (AHB = 1.5Mhz) */ |
| usleep_range(20, 30); |
| |
| /* Turn off Q6 memory */ |
| reg &= ~(CORE_L1_MEM_CORE_EN | CORE_TCM_MEM_CORE_EN | |
| CORE_TCM_MEM_PERPH_EN); |
| writel_relaxed(reg, drv->cbase + LCC_Q6_FUNC); |
| |
| reg |= CLAMP_IO; |
| writel_relaxed(reg, drv->cbase + LCC_Q6_FUNC); |
| |
| return 0; |
| } |
| |
| static struct pil_reset_ops pil_q6v3_ops = { |
| .auth_and_reset = pil_q6v3_reset, |
| .shutdown = pil_q6v3_shutdown, |
| .proxy_vote = pil_q6v3_make_proxy_votes, |
| .proxy_unvote = pil_q6v3_remove_proxy_votes, |
| }; |
| |
| static int pil_q6v3_init_image_trusted(struct pil_desc *pil, |
| const u8 *metadata, size_t size) |
| { |
| return pas_init_image(PAS_Q6, metadata, size); |
| } |
| |
| static int pil_q6v3_reset_trusted(struct pil_desc *pil) |
| { |
| return pas_auth_and_reset(PAS_Q6); |
| } |
| |
| static int pil_q6v3_shutdown_trusted(struct pil_desc *pil) |
| { |
| return pas_shutdown(PAS_Q6); |
| } |
| |
| static struct pil_reset_ops pil_q6v3_ops_trusted = { |
| .init_image = pil_q6v3_init_image_trusted, |
| .auth_and_reset = pil_q6v3_reset_trusted, |
| .shutdown = pil_q6v3_shutdown_trusted, |
| .proxy_vote = pil_q6v3_make_proxy_votes, |
| .proxy_unvote = pil_q6v3_remove_proxy_votes, |
| }; |
| |
| static void q6_fatal_fn(struct work_struct *work) |
| { |
| struct q6v3_data *drv = container_of(work, struct q6v3_data, fatal_wrk); |
| |
| pr_err("Watchdog bite received from Q6!\n"); |
| subsystem_restart_dev(drv->subsys); |
| enable_irq(drv->irq); |
| } |
| |
| static void send_q6_nmi(struct q6v3_data *drv) |
| { |
| /* Send NMI to QDSP6 via an SCM call. */ |
| scm_call_atomic1(SCM_SVC_UTIL, SCM_Q6_NMI_CMD, 0x1); |
| |
| /* Wakeup the Q6 */ |
| writel_relaxed(0x2000, drv->wk_base + 0x1c); |
| /* Q6 requires atleast 100ms to dump caches etc.*/ |
| mdelay(100); |
| pr_info("Q6 NMI was sent.\n"); |
| } |
| |
| static int lpass_q6_start(const struct subsys_desc *subsys) |
| { |
| struct q6v3_data *drv; |
| |
| drv = container_of(subsys, struct q6v3_data, subsys_desc); |
| return pil_boot(&drv->pil_desc); |
| } |
| |
| static void lpass_q6_stop(const struct subsys_desc *subsys) |
| { |
| struct q6v3_data *drv; |
| |
| drv = container_of(subsys, struct q6v3_data, subsys_desc); |
| pil_shutdown(&drv->pil_desc); |
| } |
| |
| static int lpass_q6_shutdown(const struct subsys_desc *subsys) |
| { |
| struct q6v3_data *drv; |
| |
| drv = container_of(subsys, struct q6v3_data, subsys_desc); |
| send_q6_nmi(drv); |
| writel_relaxed(0x0, drv->wd_base + 0x24); |
| mb(); |
| |
| pil_shutdown(&drv->pil_desc); |
| disable_irq_nosync(drv->irq); |
| |
| return 0; |
| } |
| |
| static int lpass_q6_powerup(const struct subsys_desc *subsys) |
| { |
| struct q6v3_data *drv; |
| int ret; |
| |
| drv = container_of(subsys, struct q6v3_data, subsys_desc); |
| ret = pil_boot(&drv->pil_desc); |
| enable_irq(drv->irq); |
| return ret; |
| } |
| |
| static int lpass_q6_ramdump(int enable, const struct subsys_desc *subsys) |
| { |
| struct q6v3_data *drv; |
| |
| drv = container_of(subsys, struct q6v3_data, subsys_desc); |
| if (!enable) |
| return 0; |
| |
| return pil_do_ramdump(&drv->pil_desc, drv->ramdump_dev); |
| } |
| |
| static void lpass_q6_crash_shutdown(const struct subsys_desc *subsys) |
| { |
| struct q6v3_data *drv; |
| |
| drv = container_of(subsys, struct q6v3_data, subsys_desc); |
| send_q6_nmi(drv); |
| } |
| |
| static irqreturn_t lpass_wdog_bite_irq(int irq, void *dev_id) |
| { |
| int ret; |
| struct q6v3_data *drv = dev_id; |
| |
| ret = schedule_work(&drv->fatal_wrk); |
| disable_irq_nosync(drv->irq); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int __devinit pil_q6v3_driver_probe(struct platform_device *pdev) |
| { |
| struct q6v3_data *drv; |
| struct resource *res; |
| struct pil_desc *desc; |
| int ret; |
| |
| drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL); |
| if (!drv) |
| return -ENOMEM; |
| platform_set_drvdata(pdev, drv); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| drv->base = devm_request_and_ioremap(&pdev->dev, res); |
| if (!drv->base) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| drv->wk_base = devm_request_and_ioremap(&pdev->dev, res); |
| if (!drv->wk_base) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 2); |
| drv->wd_base = devm_request_and_ioremap(&pdev->dev, res); |
| if (!drv->wd_base) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 3); |
| if (!res) |
| return -EINVAL; |
| drv->cbase = devm_ioremap(&pdev->dev, res->start, resource_size(res)); |
| if (!drv->cbase) |
| return -ENOMEM; |
| |
| drv->irq = platform_get_irq(pdev, 0); |
| if (drv->irq < 0) |
| return drv->irq; |
| |
| drv->pll = devm_clk_get(&pdev->dev, "pll4"); |
| if (IS_ERR(drv->pll)) |
| return PTR_ERR(drv->pll); |
| |
| desc = &drv->pil_desc; |
| desc->name = "q6"; |
| desc->dev = &pdev->dev; |
| desc->owner = THIS_MODULE; |
| desc->proxy_timeout = 10000; |
| |
| if (pas_supported(PAS_Q6) > 0) { |
| desc->ops = &pil_q6v3_ops_trusted; |
| dev_info(&pdev->dev, "using secure boot\n"); |
| } else { |
| desc->ops = &pil_q6v3_ops; |
| dev_info(&pdev->dev, "using non-secure boot\n"); |
| } |
| |
| ret = pil_desc_init(desc); |
| if (ret) |
| return ret; |
| |
| drv->subsys_desc.name = "adsp"; |
| drv->subsys_desc.dev = &pdev->dev; |
| drv->subsys_desc.owner = THIS_MODULE; |
| drv->subsys_desc.start = lpass_q6_start; |
| drv->subsys_desc.stop = lpass_q6_stop; |
| drv->subsys_desc.shutdown = lpass_q6_shutdown; |
| drv->subsys_desc.powerup = lpass_q6_powerup; |
| drv->subsys_desc.ramdump = lpass_q6_ramdump; |
| drv->subsys_desc.crash_shutdown = lpass_q6_crash_shutdown; |
| |
| INIT_WORK(&drv->fatal_wrk, q6_fatal_fn); |
| |
| drv->ramdump_dev = create_ramdump_device("lpass", &pdev->dev); |
| if (!drv->ramdump_dev) { |
| ret = -ENOMEM; |
| goto err_ramdump; |
| } |
| |
| drv->subsys = subsys_register(&drv->subsys_desc); |
| if (IS_ERR(drv->subsys)) { |
| ret = PTR_ERR(drv->subsys); |
| goto err_subsys; |
| } |
| |
| ret = devm_request_irq(&pdev->dev, drv->irq, lpass_wdog_bite_irq, |
| IRQF_TRIGGER_RISING, "lpass_wdog", drv); |
| if (ret) { |
| dev_err(&pdev->dev, "Unable to request wdog irq.\n"); |
| goto err_irq; |
| } |
| |
| return 0; |
| err_irq: |
| subsys_unregister(drv->subsys); |
| err_subsys: |
| destroy_ramdump_device(drv->ramdump_dev); |
| err_ramdump: |
| pil_desc_release(desc); |
| return ret; |
| } |
| |
| static int __devexit pil_q6v3_driver_exit(struct platform_device *pdev) |
| { |
| struct q6v3_data *drv = platform_get_drvdata(pdev); |
| subsys_unregister(drv->subsys); |
| destroy_ramdump_device(drv->ramdump_dev); |
| pil_desc_release(&drv->pil_desc); |
| return 0; |
| } |
| |
| static struct platform_driver pil_q6v3_driver = { |
| .probe = pil_q6v3_driver_probe, |
| .remove = __devexit_p(pil_q6v3_driver_exit), |
| .driver = { |
| .name = "pil_qdsp6v3", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init pil_q6v3_init(void) |
| { |
| return platform_driver_register(&pil_q6v3_driver); |
| } |
| module_init(pil_q6v3_init); |
| |
| static void __exit pil_q6v3_exit(void) |
| { |
| platform_driver_unregister(&pil_q6v3_driver); |
| } |
| module_exit(pil_q6v3_exit); |
| |
| MODULE_DESCRIPTION("Support for booting QDSP6v3 (Hexagon) processors"); |
| MODULE_LICENSE("GPL v2"); |