| /* |
| * Copyright (c) 2012, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/sched.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/of.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/interrupt.h> |
| |
| #include <mach/subsystem_restart.h> |
| #include <mach/clk.h> |
| #include <mach/msm_smsm.h> |
| |
| #include "peripheral-loader.h" |
| #include "pil-q6v5.h" |
| #include "ramdump.h" |
| #include "sysmon.h" |
| |
| /* Q6 Register Offsets */ |
| #define QDSP6SS_RST_EVB 0x010 |
| |
| /* AXI Halting Registers */ |
| #define MSS_Q6_HALT_BASE 0x180 |
| #define MSS_MODEM_HALT_BASE 0x200 |
| #define MSS_NC_HALT_BASE 0x280 |
| |
| /* RMB Status Register Values */ |
| #define STATUS_PBL_SUCCESS 0x1 |
| #define STATUS_XPU_UNLOCKED 0x1 |
| #define STATUS_XPU_UNLOCKED_SCRIBBLED 0x2 |
| |
| /* PBL/MBA interface registers */ |
| #define RMB_MBA_IMAGE 0x00 |
| #define RMB_PBL_STATUS 0x04 |
| #define RMB_MBA_COMMAND 0x08 |
| #define RMB_MBA_STATUS 0x0C |
| #define RMB_PMI_META_DATA 0x10 |
| #define RMB_PMI_CODE_START 0x14 |
| #define RMB_PMI_CODE_LENGTH 0x18 |
| |
| #define VDD_MSS_UV 1050000 |
| #define MAX_VDD_MX_UV 1050000 |
| |
| #define PROXY_TIMEOUT_MS 10000 |
| #define POLL_INTERVAL_US 50 |
| |
| #define CMD_META_DATA_READY 0x1 |
| #define CMD_LOAD_READY 0x2 |
| |
| #define STATUS_META_DATA_AUTH_SUCCESS 0x3 |
| #define STATUS_AUTH_COMPLETE 0x4 |
| |
| #define MAX_SSR_REASON_LEN 81U |
| |
| struct mba_data { |
| void __iomem *metadata_base; |
| void __iomem *rmb_base; |
| void __iomem *io_clamp_reg; |
| unsigned long metadata_phys; |
| struct pil_desc desc; |
| struct subsys_device *subsys; |
| struct subsys_desc subsys_desc; |
| void *adsp_state_notifier; |
| u32 img_length; |
| struct q6v5_data *q6; |
| int self_auth; |
| void *ramdump_dev; |
| void *smem_ramdump_dev; |
| bool crash_shutdown; |
| bool ignore_errors; |
| int is_loadable; |
| }; |
| |
| static int pbl_mba_boot_timeout_ms = 100; |
| module_param(pbl_mba_boot_timeout_ms, int, S_IRUGO | S_IWUSR); |
| |
| static int modem_auth_timeout_ms = 10000; |
| module_param(modem_auth_timeout_ms, int, S_IRUGO | S_IWUSR); |
| |
| static int pil_mss_power_up(struct q6v5_data *drv) |
| { |
| int ret; |
| struct device *dev = drv->desc.dev; |
| |
| ret = regulator_enable(drv->vreg); |
| if (ret) |
| dev_err(dev, "Failed to enable modem regulator.\n"); |
| |
| return ret; |
| } |
| |
| static int pil_mss_power_down(struct q6v5_data *drv) |
| { |
| return regulator_disable(drv->vreg); |
| } |
| |
| static int pil_mss_enable_clks(struct q6v5_data *drv) |
| { |
| int ret; |
| |
| ret = clk_prepare_enable(drv->ahb_clk); |
| if (ret) |
| goto err_ahb_clk; |
| ret = clk_prepare_enable(drv->axi_clk); |
| if (ret) |
| goto err_axi_clk; |
| ret = clk_prepare_enable(drv->rom_clk); |
| if (ret) |
| goto err_rom_clk; |
| |
| return 0; |
| |
| err_rom_clk: |
| clk_disable_unprepare(drv->axi_clk); |
| err_axi_clk: |
| clk_disable_unprepare(drv->ahb_clk); |
| err_ahb_clk: |
| return ret; |
| } |
| |
| static void pil_mss_disable_clks(struct q6v5_data *drv) |
| { |
| clk_disable_unprepare(drv->rom_clk); |
| clk_disable_unprepare(drv->axi_clk); |
| clk_disable_unprepare(drv->ahb_clk); |
| } |
| |
| static int wait_for_mba_ready(struct q6v5_data *drv) |
| { |
| struct device *dev = drv->desc.dev; |
| struct mba_data *mba = platform_get_drvdata(to_platform_device(dev)); |
| int ret; |
| u32 status; |
| |
| /* Wait for PBL completion. */ |
| ret = readl_poll_timeout(mba->rmb_base + RMB_PBL_STATUS, status, |
| status != 0, POLL_INTERVAL_US, pbl_mba_boot_timeout_ms * 1000); |
| if (ret) { |
| dev_err(dev, "PBL boot timed out\n"); |
| return ret; |
| } |
| if (status != STATUS_PBL_SUCCESS) { |
| dev_err(dev, "PBL returned unexpected status %d\n", status); |
| return -EINVAL; |
| } |
| |
| /* Wait for MBA completion. */ |
| ret = readl_poll_timeout(mba->rmb_base + RMB_MBA_STATUS, status, |
| status != 0, POLL_INTERVAL_US, pbl_mba_boot_timeout_ms * 1000); |
| if (ret) { |
| dev_err(dev, "MBA boot timed out\n"); |
| return ret; |
| } |
| if (status != STATUS_XPU_UNLOCKED && |
| status != STATUS_XPU_UNLOCKED_SCRIBBLED) { |
| dev_err(dev, "MBA returned unexpected status %d\n", status); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int pil_mss_shutdown(struct pil_desc *pil) |
| { |
| struct q6v5_data *drv = container_of(pil, struct q6v5_data, desc); |
| |
| pil_q6v5_halt_axi_port(pil, drv->axi_halt_base + MSS_Q6_HALT_BASE); |
| pil_q6v5_halt_axi_port(pil, drv->axi_halt_base + MSS_MODEM_HALT_BASE); |
| pil_q6v5_halt_axi_port(pil, drv->axi_halt_base + MSS_NC_HALT_BASE); |
| |
| /* |
| * If the shutdown function is called before the reset function, clocks |
| * and power will not be enabled yet. Enable them here so that register |
| * writes performed during the shutdown succeed. |
| */ |
| if (drv->is_booted == false) { |
| pil_mss_power_up(drv); |
| pil_mss_enable_clks(drv); |
| } |
| pil_q6v5_shutdown(pil); |
| |
| pil_mss_disable_clks(drv); |
| pil_mss_power_down(drv); |
| |
| writel_relaxed(1, drv->restart_reg); |
| |
| drv->is_booted = false; |
| |
| return 0; |
| } |
| |
| static int pil_mss_reset(struct pil_desc *pil) |
| { |
| struct q6v5_data *drv = container_of(pil, struct q6v5_data, desc); |
| struct platform_device *pdev = to_platform_device(pil->dev); |
| struct mba_data *mba = platform_get_drvdata(pdev); |
| unsigned long start_addr = pil_get_entry_addr(pil); |
| int ret; |
| |
| /* Deassert reset to subsystem and wait for propagation */ |
| writel_relaxed(0, drv->restart_reg); |
| mb(); |
| udelay(2); |
| |
| /* |
| * Bring subsystem out of reset and enable required |
| * regulators and clocks. |
| */ |
| ret = pil_mss_power_up(drv); |
| if (ret) |
| goto err_power; |
| |
| ret = pil_mss_enable_clks(drv); |
| if (ret) |
| goto err_clks; |
| |
| /* Program Image Address */ |
| if (mba->self_auth) { |
| writel_relaxed(start_addr, mba->rmb_base + RMB_MBA_IMAGE); |
| /* Ensure write to RMB base occurs before reset is released. */ |
| mb(); |
| } else { |
| writel_relaxed((start_addr >> 4) & 0x0FFFFFF0, |
| drv->reg_base + QDSP6SS_RST_EVB); |
| } |
| |
| ret = pil_q6v5_reset(pil); |
| if (ret) |
| goto err_q6v5_reset; |
| |
| /* Wait for MBA to start. Check for PBL and MBA errors while waiting. */ |
| if (mba->self_auth) { |
| ret = wait_for_mba_ready(drv); |
| if (ret) |
| goto err_auth; |
| } |
| |
| drv->is_booted = true; |
| |
| return 0; |
| |
| err_auth: |
| pil_q6v5_shutdown(pil); |
| err_q6v5_reset: |
| pil_mss_disable_clks(drv); |
| err_clks: |
| pil_mss_power_down(drv); |
| err_power: |
| return ret; |
| } |
| |
| static int pil_q6v5_mss_make_proxy_votes(struct pil_desc *pil) |
| { |
| int ret; |
| struct q6v5_data *drv = container_of(pil, struct q6v5_data, desc); |
| |
| ret = regulator_set_voltage(drv->vreg_mx, VDD_MSS_UV, MAX_VDD_MX_UV); |
| if (ret) { |
| dev_err(pil->dev, "Failed to request vreg_mx voltage\n"); |
| return ret; |
| } |
| |
| ret = regulator_enable(drv->vreg_mx); |
| if (ret) { |
| dev_err(pil->dev, "Failed to enable vreg_mx\n"); |
| regulator_set_voltage(drv->vreg_mx, 0, MAX_VDD_MX_UV); |
| return ret; |
| } |
| |
| ret = pil_q6v5_make_proxy_votes(pil); |
| if (ret) { |
| regulator_disable(drv->vreg_mx); |
| regulator_set_voltage(drv->vreg_mx, 0, MAX_VDD_MX_UV); |
| } |
| |
| return ret; |
| } |
| |
| static void pil_q6v5_mss_remove_proxy_votes(struct pil_desc *pil) |
| { |
| struct q6v5_data *drv = container_of(pil, struct q6v5_data, desc); |
| pil_q6v5_remove_proxy_votes(pil); |
| regulator_disable(drv->vreg_mx); |
| regulator_set_voltage(drv->vreg_mx, 0, MAX_VDD_MX_UV); |
| } |
| |
| static struct pil_reset_ops pil_mss_ops = { |
| .proxy_vote = pil_q6v5_mss_make_proxy_votes, |
| .proxy_unvote = pil_q6v5_mss_remove_proxy_votes, |
| .auth_and_reset = pil_mss_reset, |
| .shutdown = pil_mss_shutdown, |
| }; |
| |
| static int pil_mba_make_proxy_votes(struct pil_desc *pil) |
| { |
| int ret; |
| struct mba_data *drv = dev_get_drvdata(pil->dev); |
| |
| ret = clk_prepare_enable(drv->q6->xo); |
| if (ret) { |
| dev_err(pil->dev, "Failed to enable XO\n"); |
| return ret; |
| } |
| return 0; |
| } |
| |
| static void pil_mba_remove_proxy_votes(struct pil_desc *pil) |
| { |
| struct mba_data *drv = dev_get_drvdata(pil->dev); |
| clk_disable_unprepare(drv->q6->xo); |
| } |
| |
| static int pil_mba_init_image(struct pil_desc *pil, |
| const u8 *metadata, size_t size) |
| { |
| struct mba_data *drv = dev_get_drvdata(pil->dev); |
| s32 status; |
| int ret; |
| |
| /* Copy metadata to assigned shared buffer location */ |
| memcpy(drv->metadata_base, metadata, size); |
| |
| /* Initialize length counter to 0 */ |
| writel_relaxed(0, drv->rmb_base + RMB_PMI_CODE_LENGTH); |
| drv->img_length = 0; |
| |
| /* Pass address of meta-data to the MBA and perform authentication */ |
| writel_relaxed(drv->metadata_phys, drv->rmb_base + RMB_PMI_META_DATA); |
| writel_relaxed(CMD_META_DATA_READY, drv->rmb_base + RMB_MBA_COMMAND); |
| ret = readl_poll_timeout(drv->rmb_base + RMB_MBA_STATUS, status, |
| status == STATUS_META_DATA_AUTH_SUCCESS || status < 0, |
| POLL_INTERVAL_US, modem_auth_timeout_ms * 1000); |
| if (ret) { |
| dev_err(pil->dev, "MBA authentication of headers timed out\n"); |
| } else if (status < 0) { |
| dev_err(pil->dev, "MBA returned error %d for headers\n", |
| status); |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int pil_mba_verify_blob(struct pil_desc *pil, u32 phy_addr, |
| size_t size) |
| { |
| struct mba_data *drv = dev_get_drvdata(pil->dev); |
| s32 status; |
| |
| /* Begin image authentication */ |
| if (drv->img_length == 0) { |
| writel_relaxed(phy_addr, drv->rmb_base + RMB_PMI_CODE_START); |
| writel_relaxed(CMD_LOAD_READY, drv->rmb_base + RMB_MBA_COMMAND); |
| } |
| /* Increment length counter */ |
| drv->img_length += size; |
| writel_relaxed(drv->img_length, drv->rmb_base + RMB_PMI_CODE_LENGTH); |
| |
| status = readl_relaxed(drv->rmb_base + RMB_MBA_STATUS); |
| if (status < 0) { |
| dev_err(pil->dev, "MBA returned error %d\n", status); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int pil_mba_auth(struct pil_desc *pil) |
| { |
| struct mba_data *drv = dev_get_drvdata(pil->dev); |
| int ret; |
| s32 status; |
| |
| /* Wait for all segments to be authenticated or an error to occur */ |
| ret = readl_poll_timeout(drv->rmb_base + RMB_MBA_STATUS, status, |
| status == STATUS_AUTH_COMPLETE || status < 0, |
| 50, modem_auth_timeout_ms * 1000); |
| if (ret) { |
| dev_err(pil->dev, "MBA authentication of image timed out\n"); |
| } else if (status < 0) { |
| dev_err(pil->dev, "MBA returned error %d for image\n", status); |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static struct pil_reset_ops pil_mba_ops = { |
| .init_image = pil_mba_init_image, |
| .proxy_vote = pil_mba_make_proxy_votes, |
| .proxy_unvote = pil_mba_remove_proxy_votes, |
| .verify_blob = pil_mba_verify_blob, |
| .auth_and_reset = pil_mba_auth, |
| }; |
| |
| #define subsys_to_drv(d) container_of(d, struct mba_data, subsys_desc) |
| |
| static void log_modem_sfr(void) |
| { |
| u32 size; |
| char *smem_reason, reason[MAX_SSR_REASON_LEN]; |
| |
| smem_reason = smem_get_entry(SMEM_SSR_REASON_MSS0, &size); |
| if (!smem_reason || !size) { |
| pr_err("modem subsystem failure reason: (unknown, smem_get_entry failed).\n"); |
| return; |
| } |
| if (!smem_reason[0]) { |
| pr_err("modem subsystem failure reason: (unknown, empty string found).\n"); |
| return; |
| } |
| |
| strlcpy(reason, smem_reason, min(size, sizeof(reason))); |
| pr_err("modem subsystem failure reason: %s.\n", reason); |
| |
| smem_reason[0] = '\0'; |
| wmb(); |
| } |
| |
| static void restart_modem(struct mba_data *drv) |
| { |
| log_modem_sfr(); |
| drv->ignore_errors = true; |
| subsystem_restart_dev(drv->subsys); |
| } |
| |
| static void smsm_state_cb(void *data, uint32_t old_state, uint32_t new_state) |
| { |
| struct mba_data *drv = data; |
| |
| /* Ignore if we're the one that set SMSM_RESET */ |
| if (drv->crash_shutdown) |
| return; |
| |
| if (new_state & SMSM_RESET) { |
| pr_err("Probable fatal error on the modem.\n"); |
| restart_modem(drv); |
| } |
| } |
| |
| static int modem_shutdown(const struct subsys_desc *subsys) |
| { |
| struct mba_data *drv = subsys_to_drv(subsys); |
| |
| if (!drv->is_loadable) |
| return 0; |
| /* MBA doesn't support shutdown */ |
| pil_shutdown(&drv->q6->desc); |
| return 0; |
| } |
| |
| static int modem_powerup(const struct subsys_desc *subsys) |
| { |
| struct mba_data *drv = subsys_to_drv(subsys); |
| int ret; |
| |
| if (!drv->is_loadable) |
| return 0; |
| /* |
| * At this time, the modem is shutdown. Therefore this function cannot |
| * run concurrently with either the watchdog bite error handler or the |
| * SMSM callback, making it safe to unset the flag below. |
| */ |
| drv->ignore_errors = false; |
| ret = pil_boot(&drv->q6->desc); |
| if (ret) |
| return ret; |
| ret = pil_boot(&drv->desc); |
| if (ret) |
| pil_shutdown(&drv->q6->desc); |
| return ret; |
| } |
| |
| static void modem_crash_shutdown(const struct subsys_desc *subsys) |
| { |
| struct mba_data *drv = subsys_to_drv(subsys); |
| drv->crash_shutdown = true; |
| smsm_reset_modem(SMSM_RESET); |
| } |
| |
| static struct ramdump_segment smem_segments[] = { |
| {0x0FA00000, 0x0FC00000 - 0x0FA00000}, |
| }; |
| |
| static int modem_ramdump(int enable, const struct subsys_desc *subsys) |
| { |
| struct mba_data *drv = subsys_to_drv(subsys); |
| int ret; |
| |
| if (!enable) |
| return 0; |
| |
| ret = pil_boot(&drv->q6->desc); |
| if (ret) |
| return ret; |
| |
| ret = pil_do_ramdump(&drv->q6->desc, drv->ramdump_dev); |
| if (ret < 0) { |
| pr_err("Unable to dump modem fw memory (rc = %d).\n", ret); |
| goto out; |
| } |
| |
| ret = do_elf_ramdump(drv->smem_ramdump_dev, smem_segments, |
| ARRAY_SIZE(smem_segments)); |
| if (ret < 0) { |
| pr_err("Unable to dump smem memory (rc = %d).\n", ret); |
| goto out; |
| } |
| |
| out: |
| pil_shutdown(&drv->q6->desc); |
| return ret; |
| } |
| |
| static int adsp_state_notifier_fn(struct notifier_block *this, |
| unsigned long code, void *ss_handle) |
| { |
| int ret; |
| ret = sysmon_send_event(SYSMON_SS_MODEM, "adsp", code); |
| if (ret < 0) |
| pr_err("%s: sysmon_send_event failed (%d).", __func__, ret); |
| return NOTIFY_DONE; |
| } |
| |
| static struct notifier_block adsp_state_notifier_block = { |
| .notifier_call = adsp_state_notifier_fn, |
| }; |
| |
| static irqreturn_t modem_wdog_bite_irq(int irq, void *dev_id) |
| { |
| struct mba_data *drv = dev_id; |
| if (drv->ignore_errors) |
| return IRQ_HANDLED; |
| pr_err("Watchdog bite received from modem software!\n"); |
| restart_modem(drv); |
| return IRQ_HANDLED; |
| } |
| |
| static int mss_start(const struct subsys_desc *desc) |
| { |
| int ret; |
| struct mba_data *drv = subsys_to_drv(desc); |
| |
| if (!drv->is_loadable) |
| return 0; |
| |
| ret = pil_boot(&drv->q6->desc); |
| if (ret) |
| return ret; |
| ret = pil_boot(&drv->desc); |
| if (ret) |
| pil_shutdown(&drv->q6->desc); |
| return ret; |
| } |
| |
| static void mss_stop(const struct subsys_desc *desc) |
| { |
| struct mba_data *drv = subsys_to_drv(desc); |
| |
| if (!drv->is_loadable) |
| return; |
| |
| /* MBA doesn't support shutdown */ |
| pil_shutdown(&drv->q6->desc); |
| } |
| |
| static int __devinit pil_subsys_init(struct mba_data *drv, |
| struct platform_device *pdev) |
| { |
| int irq, ret; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| drv->subsys_desc.name = "modem"; |
| drv->subsys_desc.dev = &pdev->dev; |
| drv->subsys_desc.owner = THIS_MODULE; |
| drv->subsys_desc.shutdown = modem_shutdown; |
| drv->subsys_desc.powerup = modem_powerup; |
| drv->subsys_desc.ramdump = modem_ramdump; |
| drv->subsys_desc.crash_shutdown = modem_crash_shutdown; |
| drv->subsys_desc.start = mss_start; |
| drv->subsys_desc.stop = mss_stop; |
| |
| drv->subsys = subsys_register(&drv->subsys_desc); |
| if (IS_ERR(drv->subsys)) { |
| ret = PTR_ERR(drv->subsys); |
| goto err_subsys; |
| } |
| |
| drv->ramdump_dev = create_ramdump_device("modem", &pdev->dev); |
| if (!drv->ramdump_dev) { |
| pr_err("%s: Unable to create a modem ramdump device.\n", |
| __func__); |
| ret = -ENOMEM; |
| goto err_ramdump; |
| } |
| |
| drv->smem_ramdump_dev = create_ramdump_device("smem-modem", &pdev->dev); |
| if (!drv->smem_ramdump_dev) { |
| pr_err("%s: Unable to create an smem ramdump device.\n", |
| __func__); |
| ret = -ENOMEM; |
| goto err_ramdump_smem; |
| } |
| |
| ret = devm_request_irq(&pdev->dev, irq, modem_wdog_bite_irq, |
| IRQF_TRIGGER_RISING, "modem_wdog", drv); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Unable to request watchdog IRQ.\n"); |
| goto err_irq; |
| } |
| |
| ret = smsm_state_cb_register(SMSM_MODEM_STATE, SMSM_RESET, |
| smsm_state_cb, drv); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Unable to register SMSM callback!\n"); |
| goto err_irq; |
| } |
| |
| drv->adsp_state_notifier = subsys_notif_register_notifier("adsp", |
| &adsp_state_notifier_block); |
| if (IS_ERR(drv->adsp_state_notifier)) { |
| ret = PTR_ERR(drv->adsp_state_notifier); |
| dev_err(&pdev->dev, "%s: Registration with the SSR notification driver failed (%d)", |
| __func__, ret); |
| goto err_smsm; |
| } |
| |
| return 0; |
| |
| err_smsm: |
| smsm_state_cb_deregister(SMSM_MODEM_STATE, SMSM_RESET, smsm_state_cb, |
| drv); |
| err_irq: |
| destroy_ramdump_device(drv->smem_ramdump_dev); |
| err_ramdump_smem: |
| destroy_ramdump_device(drv->ramdump_dev); |
| err_ramdump: |
| subsys_unregister(drv->subsys); |
| err_subsys: |
| return ret; |
| } |
| |
| static int __devinit pil_mss_loadable_init(struct mba_data *drv, |
| struct platform_device *pdev) |
| { |
| struct q6v5_data *q6; |
| struct pil_desc *q6_desc, *mba_desc; |
| struct resource *res; |
| int ret; |
| |
| q6 = pil_q6v5_init(pdev); |
| if (IS_ERR(q6)) |
| return PTR_ERR(q6); |
| drv->q6 = q6; |
| |
| q6_desc = &q6->desc; |
| q6_desc->ops = &pil_mss_ops; |
| q6_desc->owner = THIS_MODULE; |
| q6_desc->proxy_timeout = PROXY_TIMEOUT_MS; |
| |
| of_property_read_u32(pdev->dev.of_node, "qcom,pil-self-auth", |
| &drv->self_auth); |
| if (drv->self_auth) { |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| "rmb_base"); |
| drv->rmb_base = devm_request_and_ioremap(&pdev->dev, res); |
| if (!drv->rmb_base) |
| return -ENOMEM; |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| "metadata_base"); |
| if (res) { |
| drv->metadata_base = devm_ioremap(&pdev->dev, |
| res->start, resource_size(res)); |
| if (!drv->metadata_base) |
| return -ENOMEM; |
| drv->metadata_phys = res->start; |
| } |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "restart_reg"); |
| q6->restart_reg = devm_request_and_ioremap(&pdev->dev, res); |
| if (!q6->restart_reg) |
| return -ENOMEM; |
| |
| q6->vreg = devm_regulator_get(&pdev->dev, "vdd_mss"); |
| if (IS_ERR(q6->vreg)) |
| return PTR_ERR(q6->vreg); |
| |
| q6->vreg_mx = devm_regulator_get(&pdev->dev, "vdd_mx"); |
| if (IS_ERR(q6->vreg_mx)) |
| return PTR_ERR(q6->vreg_mx); |
| |
| ret = regulator_set_voltage(q6->vreg, VDD_MSS_UV, VDD_MSS_UV); |
| if (ret) |
| dev_err(&pdev->dev, "Failed to set regulator's voltage.\n"); |
| |
| ret = regulator_set_optimum_mode(q6->vreg, 100000); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Failed to set regulator's mode.\n"); |
| return ret; |
| } |
| |
| q6->ahb_clk = devm_clk_get(&pdev->dev, "iface_clk"); |
| if (IS_ERR(q6->ahb_clk)) |
| return PTR_ERR(q6->ahb_clk); |
| |
| q6->axi_clk = devm_clk_get(&pdev->dev, "bus_clk"); |
| if (IS_ERR(q6->axi_clk)) |
| return PTR_ERR(q6->axi_clk); |
| |
| q6->rom_clk = devm_clk_get(&pdev->dev, "mem_clk"); |
| if (IS_ERR(q6->rom_clk)) |
| return PTR_ERR(q6->rom_clk); |
| |
| ret = pil_desc_init(q6_desc); |
| if (ret) |
| return ret; |
| |
| mba_desc = &drv->desc; |
| mba_desc->name = "modem"; |
| mba_desc->dev = &pdev->dev; |
| mba_desc->ops = &pil_mba_ops; |
| mba_desc->owner = THIS_MODULE; |
| mba_desc->proxy_timeout = PROXY_TIMEOUT_MS; |
| |
| ret = pil_desc_init(mba_desc); |
| if (ret) |
| goto err_mba_desc; |
| |
| return 0; |
| |
| err_mba_desc: |
| pil_desc_release(q6_desc); |
| return ret; |
| |
| } |
| |
| static int __devinit pil_mss_driver_probe(struct platform_device *pdev) |
| { |
| struct mba_data *drv; |
| int ret; |
| |
| drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL); |
| if (!drv) |
| return -ENOMEM; |
| platform_set_drvdata(pdev, drv); |
| |
| drv->is_loadable = of_property_read_bool(pdev->dev.of_node, |
| "qcom,is-loadable"); |
| if (drv->is_loadable) { |
| ret = pil_mss_loadable_init(drv, pdev); |
| if (ret) |
| return ret; |
| } |
| |
| return pil_subsys_init(drv, pdev); |
| } |
| |
| static int __devexit pil_mss_driver_exit(struct platform_device *pdev) |
| { |
| struct mba_data *drv = platform_get_drvdata(pdev); |
| |
| subsys_notif_unregister_notifier(drv->adsp_state_notifier, |
| &adsp_state_notifier_block); |
| smsm_state_cb_deregister(SMSM_MODEM_STATE, SMSM_RESET, |
| smsm_state_cb, drv); |
| subsys_unregister(drv->subsys); |
| destroy_ramdump_device(drv->smem_ramdump_dev); |
| destroy_ramdump_device(drv->ramdump_dev); |
| pil_desc_release(&drv->desc); |
| pil_desc_release(&drv->q6->desc); |
| return 0; |
| } |
| |
| static struct of_device_id mss_match_table[] = { |
| { .compatible = "qcom,pil-q6v5-mss" }, |
| {} |
| }; |
| |
| static struct platform_driver pil_mss_driver = { |
| .probe = pil_mss_driver_probe, |
| .remove = __devexit_p(pil_mss_driver_exit), |
| .driver = { |
| .name = "pil-q6v5-mss", |
| .of_match_table = mss_match_table, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init pil_mss_init(void) |
| { |
| return platform_driver_register(&pil_mss_driver); |
| } |
| module_init(pil_mss_init); |
| |
| static void __exit pil_mss_exit(void) |
| { |
| platform_driver_unregister(&pil_mss_driver); |
| } |
| module_exit(pil_mss_exit); |
| |
| MODULE_DESCRIPTION("Support for booting modem subsystems with QDSP6v5 Hexagon processors"); |
| MODULE_LICENSE("GPL v2"); |