libata: implement EH fast drain
In most cases, when EH is scheduled, all in-flight commands are
aborted causing EH to kick in immediately. However, in some cases
(especially with PMP), it's unclear which commands are affected by the
error condition and although aborting all in-flight commands work, it
isn't optimal and may cause unnecessary disruption. On the other
hand, waiting for in-flight commands to drain themselves can take up
to 30seconds.
This patch implements EH fast drain to handle such situations. It
gives in-flight commands some time to finish up but doesn't wait for
too long. After EH is scheduled, fast drain timer is started and if
no other completion occurs in ATA_EH_FASTDRAIN_INTERVAL all in-flight
commands are aborted. If any completion occurred in the interval, the
port is given another interval to finish up itself.
Currently ATA_EH_FASTDRAIN_INTERVAL is 3 secs which should be enough
for finishing up most commands.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index e7e2ba2..ac6ceed 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -56,6 +56,7 @@
*/
enum {
ATA_EH_PRERESET_TIMEOUT = 10 * HZ,
+ ATA_EH_FASTDRAIN_INTERVAL = 3 * HZ,
};
/* The following table determines how we sequence resets. Each entry
@@ -361,6 +362,9 @@
repeat:
/* invoke error handler */
if (ap->ops->error_handler) {
+ /* kill fast drain timer */
+ del_timer_sync(&ap->fastdrain_timer);
+
/* process port resume request */
ata_eh_handle_port_resume(ap);
@@ -576,6 +580,94 @@
DPRINTK("EXIT\n");
}
+static int ata_eh_nr_in_flight(struct ata_port *ap)
+{
+ unsigned int tag;
+ int nr = 0;
+
+ /* count only non-internal commands */
+ for (tag = 0; tag < ATA_MAX_QUEUE - 1; tag++)
+ if (ata_qc_from_tag(ap, tag))
+ nr++;
+
+ return nr;
+}
+
+void ata_eh_fastdrain_timerfn(unsigned long arg)
+{
+ struct ata_port *ap = (void *)arg;
+ unsigned long flags;
+ int cnt;
+
+ spin_lock_irqsave(ap->lock, flags);
+
+ cnt = ata_eh_nr_in_flight(ap);
+
+ /* are we done? */
+ if (!cnt)
+ goto out_unlock;
+
+ if (cnt == ap->fastdrain_cnt) {
+ unsigned int tag;
+
+ /* No progress during the last interval, tag all
+ * in-flight qcs as timed out and freeze the port.
+ */
+ for (tag = 0; tag < ATA_MAX_QUEUE - 1; tag++) {
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag);
+ if (qc)
+ qc->err_mask |= AC_ERR_TIMEOUT;
+ }
+
+ ata_port_freeze(ap);
+ } else {
+ /* some qcs have finished, give it another chance */
+ ap->fastdrain_cnt = cnt;
+ ap->fastdrain_timer.expires =
+ jiffies + ATA_EH_FASTDRAIN_INTERVAL;
+ add_timer(&ap->fastdrain_timer);
+ }
+
+ out_unlock:
+ spin_unlock_irqrestore(ap->lock, flags);
+}
+
+/**
+ * ata_eh_set_pending - set ATA_PFLAG_EH_PENDING and activate fast drain
+ * @ap: target ATA port
+ * @fastdrain: activate fast drain
+ *
+ * Set ATA_PFLAG_EH_PENDING and activate fast drain if @fastdrain
+ * is non-zero and EH wasn't pending before. Fast drain ensures
+ * that EH kicks in in timely manner.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+static void ata_eh_set_pending(struct ata_port *ap, int fastdrain)
+{
+ int cnt;
+
+ /* already scheduled? */
+ if (ap->pflags & ATA_PFLAG_EH_PENDING)
+ return;
+
+ ap->pflags |= ATA_PFLAG_EH_PENDING;
+
+ if (!fastdrain)
+ return;
+
+ /* do we have in-flight qcs? */
+ cnt = ata_eh_nr_in_flight(ap);
+ if (!cnt)
+ return;
+
+ /* activate fast drain */
+ ap->fastdrain_cnt = cnt;
+ ap->fastdrain_timer.expires = jiffies + ATA_EH_FASTDRAIN_INTERVAL;
+ add_timer(&ap->fastdrain_timer);
+}
+
/**
* ata_qc_schedule_eh - schedule qc for error handling
* @qc: command to schedule error handling for
@@ -593,7 +685,7 @@
WARN_ON(!ap->ops->error_handler);
qc->flags |= ATA_QCFLAG_FAILED;
- qc->ap->pflags |= ATA_PFLAG_EH_PENDING;
+ ata_eh_set_pending(ap, 1);
/* The following will fail if timeout has already expired.
* ata_scsi_error() takes care of such scmds on EH entry.
@@ -620,7 +712,7 @@
if (ap->pflags & ATA_PFLAG_INITIALIZING)
return;
- ap->pflags |= ATA_PFLAG_EH_PENDING;
+ ata_eh_set_pending(ap, 1);
scsi_schedule_eh(ap->scsi_host);
DPRINTK("port EH scheduled\n");
@@ -644,6 +736,9 @@
WARN_ON(!ap->ops->error_handler);
+ /* we're gonna abort all commands, no need for fast drain */
+ ata_eh_set_pending(ap, 0);
+
for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag);