arch/arm/mach-msm/board-8930-gpiomux.c - kernel/msm - Gitiles

 /* Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  */

 #include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <mach/gpiomux.h>
 #include <mach/socinfo.h>
 #include "devices.h"
 #include "board-8930.h"

 /* The SPI configurations apply to GSBI 1*/
 static struct gpiomux_setting spi_active = {
 	.func = GPIOMUX_FUNC_1,
 	.drv = GPIOMUX_DRV_12MA,
 	.pull = GPIOMUX_PULL_NONE,
 };

 static struct gpiomux_setting spi_suspended_config = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_2MA,
 	.pull = GPIOMUX_PULL_DOWN,
 };

 static struct gpiomux_setting gsbi3_suspended_cfg = {
 	.func = GPIOMUX_FUNC_1,
 	.drv = GPIOMUX_DRV_2MA,
 	.pull = GPIOMUX_PULL_KEEPER,
 };

 static struct gpiomux_setting gsbi3_active_cfg = {
 	.func = GPIOMUX_FUNC_1,
 	.drv = GPIOMUX_DRV_8MA,
 	.pull = GPIOMUX_PULL_NONE,
 };

 static struct gpiomux_setting gsbi5 = {
 	.func = GPIOMUX_FUNC_1,
 	.drv = GPIOMUX_DRV_8MA,
 	.pull = GPIOMUX_PULL_NONE,
 };

 static struct gpiomux_setting gsbi9 = {
 	.func = GPIOMUX_FUNC_2,
 	.drv = GPIOMUX_DRV_8MA,
 	.pull = GPIOMUX_PULL_NONE,
 };

 static struct gpiomux_setting gsbi10 = {
 	.func = GPIOMUX_FUNC_2,
 	.drv = GPIOMUX_DRV_8MA,
 	.pull = GPIOMUX_PULL_NONE,
 };

 static struct gpiomux_setting gsbi12 = {
 	.func = GPIOMUX_FUNC_1,
 	.drv = GPIOMUX_DRV_8MA,
 	.pull = GPIOMUX_PULL_NONE,
 };

 static struct gpiomux_setting cdc_mclk = {
 	.func = GPIOMUX_FUNC_1,
 	.drv = GPIOMUX_DRV_8MA,
 	.pull = GPIOMUX_PULL_NONE,
 };

 static struct gpiomux_setting audio_auxpcm[] = {
 	/* Suspended state */
 	{
 		.func = GPIOMUX_FUNC_GPIO,
 		.drv = GPIOMUX_DRV_2MA,
 		.pull = GPIOMUX_PULL_NONE,
 	},
 	/* Active state */
 	{
 		.func = GPIOMUX_FUNC_1,
 		.drv = GPIOMUX_DRV_2MA,
 		.pull = GPIOMUX_PULL_NONE,
 	},
 };

 static struct gpiomux_setting audio_mbhc = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_8MA,
 	.pull = GPIOMUX_PULL_NONE,
 };

 static struct gpiomux_setting audio_spkr_boost = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_8MA,
 	.pull = GPIOMUX_PULL_NONE,
 };

 #if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
 static struct gpiomux_setting gpio_eth_config = {
 	.pull = GPIOMUX_PULL_NONE,
 	.drv = GPIOMUX_DRV_8MA,
 	.func = GPIOMUX_FUNC_GPIO,
 };
 #endif

 static struct gpiomux_setting slimbus = {
 	.func = GPIOMUX_FUNC_1,
 	.drv = GPIOMUX_DRV_8MA,
 	.pull = GPIOMUX_PULL_KEEPER,
 };

 static struct gpiomux_setting wcnss_5wire_suspend_cfg = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv  = GPIOMUX_DRV_2MA,
 	.pull = GPIOMUX_PULL_UP,
 };

 static struct gpiomux_setting wcnss_5wire_active_cfg = {
 	.func = GPIOMUX_FUNC_1,
 	.drv  = GPIOMUX_DRV_6MA,
 	.pull = GPIOMUX_PULL_DOWN,
 };

 static struct gpiomux_setting atmel_resout_sus_cfg = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_6MA,
 	.pull = GPIOMUX_PULL_DOWN,
 };

 static struct gpiomux_setting atmel_resout_act_cfg = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_6MA,
 	.pull = GPIOMUX_PULL_UP,
 };

 static struct gpiomux_setting atmel_ldo_en_sus_cfg = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_6MA,
 	.pull = GPIOMUX_PULL_DOWN,
 };

 static struct gpiomux_setting atmel_ldo_en_act_cfg = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_6MA,
 	.pull = GPIOMUX_PULL_DOWN,
 };

 static struct gpiomux_setting atmel_int_act_cfg = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_8MA,
 	.pull = GPIOMUX_PULL_UP,
 };

 static struct gpiomux_setting atmel_int_sus_cfg = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_2MA,
 	.pull = GPIOMUX_PULL_DOWN,
 };
 #ifdef MSM8930_PHASE_2
 static struct gpiomux_setting hsusb_sus_cfg = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_2MA,
 	.pull = GPIOMUX_PULL_NONE,
 	.dir = GPIOMUX_OUT_LOW,
 };
 static struct msm_gpiomux_config msm8930_hsusb_configs[] = {
 	{
 		.gpio = 63,     /* HSUSB_EXTERNAL_5V_LDO_EN */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &hsusb_sus_cfg,
 		},
 	},
 	{
 		.gpio = 97,     /* HSUSB_5V_EN */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &hsusb_sus_cfg,
 		},
 	},
 };
 #endif

 static struct gpiomux_setting hap_lvl_shft_suspended_config = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_2MA,
 	.pull = GPIOMUX_PULL_DOWN,
 };

 static struct gpiomux_setting hap_lvl_shft_active_config = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_8MA,
 	.pull = GPIOMUX_PULL_UP,
 };

 static struct gpiomux_setting ap2mdm_cfg = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_8MA,
 	.pull = GPIOMUX_PULL_DOWN,
 };

 static struct gpiomux_setting mdm2ap_status_cfg = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_8MA,
 	.pull = GPIOMUX_PULL_NONE,
 };

 static struct gpiomux_setting mdm2ap_errfatal_cfg = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_16MA,
 	.pull = GPIOMUX_PULL_DOWN,
 };

 static struct gpiomux_setting ap2mdm_kpdpwr_n_cfg = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_8MA,
 	.pull = GPIOMUX_PULL_NONE,
 };

 static struct gpiomux_setting mdp_vsync_suspend_cfg = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_2MA,
 	.pull = GPIOMUX_PULL_DOWN,
 };

 static struct gpiomux_setting mdp_vsync_active_cfg = {
 	.func = GPIOMUX_FUNC_1,
 	.drv = GPIOMUX_DRV_2MA,
 	.pull = GPIOMUX_PULL_DOWN,
 };

 #ifdef CONFIG_FB_MSM_HDMI_MSM_PANEL
 static struct gpiomux_setting hdmi_suspend_cfg = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_2MA,
 	.pull = GPIOMUX_PULL_DOWN,
 };

 static struct gpiomux_setting hdmi_active_1_cfg = {
 	.func = GPIOMUX_FUNC_1,
 	.drv = GPIOMUX_DRV_2MA,
 	.pull = GPIOMUX_PULL_UP,
 };

 static struct gpiomux_setting hdmi_active_2_cfg = {
 	.func = GPIOMUX_FUNC_1,
 	.drv = GPIOMUX_DRV_2MA,
 	.pull = GPIOMUX_PULL_DOWN,
 };

 static struct gpiomux_setting hdmi_active_3_cfg = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_2MA,
 	.pull = GPIOMUX_PULL_UP,
 	.dir = GPIOMUX_IN,
 };

 static struct gpiomux_setting hdmi_active_4_cfg = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_2MA,
 	.pull = GPIOMUX_PULL_UP,
 	.dir = GPIOMUX_OUT_HIGH,
 };

 static struct gpiomux_setting hdmi_active_5_cfg = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_2MA,
 	.pull = GPIOMUX_PULL_UP,
 	.dir = GPIOMUX_OUT_HIGH,
 };

 #endif

 #if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
 static struct msm_gpiomux_config msm8960_ethernet_configs[] = {
 	{
 		.gpio = 90,
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &gpio_eth_config,
 		}
 	},
 	{
 		.gpio = 89,
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &gpio_eth_config,
 		}
 	},
 };
 #endif

 static struct msm_gpiomux_config msm8960_gsbi_configs[] __initdata = {
 	{
 		.gpio      = 6,		/* GSBI1 QUP SPI_DATA_MOSI */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &spi_suspended_config,
 			[GPIOMUX_ACTIVE] = &spi_active,
 		},
 	},
 	{
 		.gpio      = 7,		/* GSBI1 QUP SPI_DATA_MISO */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &spi_suspended_config,
 			[GPIOMUX_ACTIVE] = &spi_active,
 		},
 	},
 	{
 		.gpio      = 8,		/* GSBI1 QUP SPI_CS_N */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &spi_suspended_config,
 			[GPIOMUX_ACTIVE] = &spi_active,
 		},
 	},
 	{
 		.gpio      = 9,		/* GSBI1 QUP SPI_CLK */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &spi_suspended_config,
 			[GPIOMUX_ACTIVE] = &spi_active,
 		},
 	},
 	{
 		.gpio      = 16,	/* GSBI3 I2C QUP SDA */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &gsbi3_suspended_cfg,
 			[GPIOMUX_ACTIVE] = &gsbi3_active_cfg,
 		},
 	},
 	{
 		.gpio      = 17,	/* GSBI3 I2C QUP SCL */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &gsbi3_suspended_cfg,
 			[GPIOMUX_ACTIVE] = &gsbi3_active_cfg,
 		},
 	},
 	{
 		.gpio      = 22,	/* GSBI5 UART2 */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &gsbi5,
 		},
 	},
 	{
 		.gpio      = 23,	/* GSBI5 UART2 */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &gsbi5,
 		},
 	},
 	{
 		.gpio      = 44,	/* GSBI12 I2C QUP SDA */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &gsbi12,
 		},
 	},
 	{
 		.gpio      = 95,	/* GSBI9 I2C QUP SDA */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &gsbi9,
 		},
 	},
 	{
 		.gpio      = 96,	/* GSBI12 I2C QUP SCL */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &gsbi9,
 		},
 	},
 	{
 		.gpio      = 45,	/* GSBI12 I2C QUP SCL */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &gsbi12,
 		},
 	},
 	{
 		.gpio      = 73,	/* GSBI10 I2C QUP SDA */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &gsbi10,
 		},
 	},
 	{
 		.gpio      = 74,	/* GSBI10 I2C QUP SCL */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &gsbi10,
 		},
 	},
 };

 static struct msm_gpiomux_config msm8960_slimbus_config[] __initdata = {
 	{
 		.gpio	= 60,		/* slimbus data */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &slimbus,
 		},
 	},
 	{
 		.gpio	= 61,		/* slimbus clk */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &slimbus,
 		},
 	},
 };

 static struct msm_gpiomux_config msm8960_audio_codec_configs[] __initdata = {
 	{
 		.gpio = 59,
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &cdc_mclk,
 		},
 	},
 };

 static struct msm_gpiomux_config msm8960_audio_mbhc_configs[] __initdata = {
 	{
 		.gpio = 37,
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &audio_mbhc,
 		},
 	},
 };

 static struct msm_gpiomux_config msm8960_audio_spkr_configs[] __initdata = {
 	{
 		.gpio = 15,
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &audio_spkr_boost,
 		},
 	},
 };


 static struct msm_gpiomux_config msm8960_audio_auxpcm_configs[] __initdata = {
 	{
 		.gpio = 63,
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &audio_auxpcm[0],
 			[GPIOMUX_ACTIVE] = &audio_auxpcm[1],
 		},
 	},
 	{
 		.gpio = 64,
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &audio_auxpcm[0],
 			[GPIOMUX_ACTIVE] = &audio_auxpcm[1],
 		},
 	},
 	{
 		.gpio = 65,
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &audio_auxpcm[0],
 			[GPIOMUX_ACTIVE] = &audio_auxpcm[1],
 		},
 	},
 	{
 		.gpio = 66,
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &audio_auxpcm[0],
 			[GPIOMUX_ACTIVE] = &audio_auxpcm[1],
 		},
 	},
 };

 static struct msm_gpiomux_config wcnss_5wire_interface[] = {
 	{
 		.gpio = 84,
 		.settings = {
 			[GPIOMUX_ACTIVE]    = &wcnss_5wire_active_cfg,
 			[GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg,
 		},
 	},
 	{
 		.gpio = 85,
 		.settings = {
 			[GPIOMUX_ACTIVE]    = &wcnss_5wire_active_cfg,
 			[GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg,
 		},
 	},
 	{
 		.gpio = 86,
 		.settings = {
 			[GPIOMUX_ACTIVE]    = &wcnss_5wire_active_cfg,
 			[GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg,
 		},
 	},
 	{
 		.gpio = 87,
 		.settings = {
 			[GPIOMUX_ACTIVE]    = &wcnss_5wire_active_cfg,
 			[GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg,
 		},
 	},
 	{
 		.gpio = 88,
 		.settings = {
 			[GPIOMUX_ACTIVE]    = &wcnss_5wire_active_cfg,
 			[GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg,
 		},
 	},
 };

 static struct msm_gpiomux_config msm8960_atmel_configs[] __initdata = {
 	{	/* TS INTERRUPT */
 		.gpio = 11,
 		.settings = {
 			[GPIOMUX_ACTIVE]    = &atmel_int_act_cfg,
 			[GPIOMUX_SUSPENDED] = &atmel_int_sus_cfg,
 		},
 	},
 	{	/* TS LDO ENABLE */
 		.gpio = 50,
 		.settings = {
 			[GPIOMUX_ACTIVE]    = &atmel_ldo_en_act_cfg,
 			[GPIOMUX_SUSPENDED] = &atmel_ldo_en_sus_cfg,
 		},
 	},
 	{	/* TS RESOUT */
 		.gpio = 52,
 		.settings = {
 			[GPIOMUX_ACTIVE]    = &atmel_resout_act_cfg,
 			[GPIOMUX_SUSPENDED] = &atmel_resout_sus_cfg,
 		},
 	},
 };

 static struct msm_gpiomux_config hap_lvl_shft_config[] __initdata = {
 	{
 		.gpio = 47,
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &hap_lvl_shft_suspended_config,
 			[GPIOMUX_ACTIVE] = &hap_lvl_shft_active_config,
 		},
 	},
 };

 static struct msm_gpiomux_config mdm_configs[] __initdata = {
 	/* AP2MDM_STATUS */
 	{
 		.gpio = 94,
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &ap2mdm_cfg,
 		}
 	},
 	/* MDM2AP_STATUS */
 	{
 		.gpio = 69,
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &mdm2ap_status_cfg,
 		}
 	},
 	/* MDM2AP_ERRFATAL */
 	{
 		.gpio = 70,
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &mdm2ap_errfatal_cfg,
 		}
 	},
 	/* AP2MDM_ERRFATAL */
 	{
 		.gpio = 95,
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &ap2mdm_cfg,
 		}
 	},
 	/* AP2MDM_KPDPWR_N */
 	{
 		.gpio = 81,
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &ap2mdm_kpdpwr_n_cfg,
 		}
 	},
 	/* AP2MDM_PMIC_RESET_N */
 	{
 		.gpio = 80,
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &ap2mdm_kpdpwr_n_cfg,
 		}
 	}
 };

 static struct msm_gpiomux_config msm8960_mdp_vsync_configs[] __initdata = {
 	{
 		.gpio = 0,
 		.settings = {
 			[GPIOMUX_ACTIVE]    = &mdp_vsync_active_cfg,
 			[GPIOMUX_SUSPENDED] = &mdp_vsync_suspend_cfg,
 		},
 	}
 };

 #ifdef CONFIG_FB_MSM_HDMI_MSM_PANEL
 static struct msm_gpiomux_config msm8960_hdmi_configs[] __initdata = {
 	{
 		.gpio = 99,
 		.settings = {
 			[GPIOMUX_ACTIVE]    = &hdmi_active_1_cfg,
 			[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
 		},
 	},
 	{
 		.gpio = 100,
 		.settings = {
 			[GPIOMUX_ACTIVE]    = &hdmi_active_1_cfg,
 			[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
 		},
 	},
 	{
 		.gpio = 101,
 		.settings = {
 			[GPIOMUX_ACTIVE]    = &hdmi_active_1_cfg,
 			[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
 		},
 	},
 	{
 		.gpio = 102,
 		.settings = {
 			[GPIOMUX_ACTIVE]    = &hdmi_active_2_cfg,
 			[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
 		},
 	},

 };

 static struct msm_gpiomux_config msm8930_mhl_configs[] __initdata = {
 	{
 		.gpio = 72,
 		.settings = {
 			[GPIOMUX_ACTIVE]    = &hdmi_active_3_cfg,
 			[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
 		},
 	},
 	{
 		.gpio = 71,
 		.settings = {
 			[GPIOMUX_ACTIVE]    = &hdmi_active_4_cfg,
 			[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
 		},
 	},
 	{
 		.gpio = 73,
 		.settings = {
 			[GPIOMUX_ACTIVE]    = &hdmi_active_5_cfg,
 			[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
 		},
 	},

 };
 #endif

 static struct gpiomux_setting haptics_active_cfg = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_8MA,
 	.pull = GPIOMUX_PULL_UP,
 };
 static struct gpiomux_setting haptics_suspend_cfg = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_8MA,
 	.pull = GPIOMUX_PULL_DOWN,
 };

 static struct msm_gpiomux_config msm8930_haptics_configs[] __initdata = {
 	{
 		.gpio = 77,
 		.settings = {
 			[GPIOMUX_ACTIVE] = &haptics_active_cfg,
 			[GPIOMUX_SUSPENDED] = &haptics_suspend_cfg,
 		},
 	},
 	{
 		.gpio = 78,
 		.settings = {
 			[GPIOMUX_ACTIVE] = &haptics_active_cfg,
 			[GPIOMUX_SUSPENDED] = &haptics_suspend_cfg,
 		},
 	},
 };

 static struct gpiomux_setting sd_det_line = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_2MA,
 	.pull = GPIOMUX_PULL_NONE,
 };

 static struct msm_gpiomux_config msm8930_sd_det_config[] __initdata = {
 	{
 		.gpio = 94,	/* SD Card Detect Line */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &sd_det_line,
 			[GPIOMUX_ACTIVE] = &sd_det_line,
 		},
 	},
 };

 static struct gpiomux_setting gyro_int_line = {
 	.func = GPIOMUX_FUNC_GPIO,
 	.drv = GPIOMUX_DRV_2MA,
 	.pull = GPIOMUX_PULL_NONE,
 };

 static struct msm_gpiomux_config msm8930_gyro_int_config[] __initdata = {
 	{
 		.gpio = 69,	/* Gyro Interrupt Line */
 		.settings = {
 			[GPIOMUX_SUSPENDED] = &gyro_int_line,
 			[GPIOMUX_ACTIVE] = &gyro_int_line,
 		},
 	},
 };

 int __init msm8930_init_gpiomux(void)
 {
 	int rc = msm_gpiomux_init(NR_GPIO_IRQS);
 	if (rc) {
 		pr_err(KERN_ERR "msm_gpiomux_init failed %d\n", rc);
 		return rc;
 	}

 #if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
 	msm_gpiomux_install(msm8960_ethernet_configs,
 			ARRAY_SIZE(msm8960_ethernet_configs));
 #endif

 	msm_gpiomux_install(msm8960_gsbi_configs,
 			ARRAY_SIZE(msm8960_gsbi_configs));

 	msm_gpiomux_install(msm8960_atmel_configs,
 			ARRAY_SIZE(msm8960_atmel_configs));

 	msm_gpiomux_install(msm8960_slimbus_config,
 			ARRAY_SIZE(msm8960_slimbus_config));

 	msm_gpiomux_install(msm8960_audio_codec_configs,
 			ARRAY_SIZE(msm8960_audio_codec_configs));

 	msm_gpiomux_install(msm8960_audio_mbhc_configs,
 			ARRAY_SIZE(msm8960_audio_mbhc_configs));

 	msm_gpiomux_install(msm8960_audio_spkr_configs,
 			ARRAY_SIZE(msm8960_audio_spkr_configs));

 	msm_gpiomux_install(msm8960_audio_auxpcm_configs,
 			ARRAY_SIZE(msm8960_audio_auxpcm_configs));

 	msm_gpiomux_install(wcnss_5wire_interface,
 			ARRAY_SIZE(wcnss_5wire_interface));

 	if (machine_is_msm8930_mtp() || machine_is_msm8930_fluid() ||
 		machine_is_msm8930_cdp()) {
 		msm_gpiomux_install(hap_lvl_shft_config,
 			ARRAY_SIZE(hap_lvl_shft_config));
 #ifdef MSM8930_PHASE_2
 		msm_gpiomux_install(msm8930_hsusb_configs,
 			ARRAY_SIZE(msm8930_hsusb_configs));
 #endif
 	}

 	if (PLATFORM_IS_CHARM25())
 		msm_gpiomux_install(mdm_configs,
 			ARRAY_SIZE(mdm_configs));

 	if (machine_is_msm8930_cdp() || machine_is_msm8930_mtp()
 		|| machine_is_msm8930_fluid())
 		msm_gpiomux_install(msm8930_haptics_configs,
 			ARRAY_SIZE(msm8930_haptics_configs));

 #ifdef CONFIG_FB_MSM_HDMI_MSM_PANEL
 	msm_gpiomux_install(msm8960_hdmi_configs,
 			ARRAY_SIZE(msm8960_hdmi_configs));
 	if (machine_is_msm8930_fluid())
 		msm_gpiomux_install(msm8930_mhl_configs,
 				ARRAY_SIZE(msm8930_mhl_configs));
 #endif

 	msm_gpiomux_install(msm8960_mdp_vsync_configs,
 			ARRAY_SIZE(msm8960_mdp_vsync_configs));

 	msm_gpiomux_install(msm8930_sd_det_config,
 			ARRAY_SIZE(msm8930_sd_det_config));

 	if (machine_is_msm8930_fluid() || machine_is_msm8930_mtp())
 		msm_gpiomux_install(msm8930_gyro_int_config,
 			ARRAY_SIZE(msm8930_gyro_int_config));

 	return 0;
 }
	/* Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 and
	* only version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	*/

	#include <linux/gpio.h>
	#include <asm/mach-types.h>
	#include <mach/gpiomux.h>
	#include <mach/socinfo.h>
	#include "devices.h"
	#include "board-8930.h"

	/* The SPI configurations apply to GSBI 1*/
	static struct gpiomux_setting spi_active = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_12MA,
	.pull = GPIOMUX_PULL_NONE,
	};

	static struct gpiomux_setting spi_suspended_config = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
	};

	static struct gpiomux_setting gsbi3_suspended_cfg = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_KEEPER,
	};

	static struct gpiomux_setting gsbi3_active_cfg = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_NONE,
	};

	static struct gpiomux_setting gsbi5 = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_NONE,
	};

	static struct gpiomux_setting gsbi9 = {
	.func = GPIOMUX_FUNC_2,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_NONE,
	};

	static struct gpiomux_setting gsbi10 = {
	.func = GPIOMUX_FUNC_2,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_NONE,
	};

	static struct gpiomux_setting gsbi12 = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_NONE,
	};

	static struct gpiomux_setting cdc_mclk = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_NONE,
	};

	static struct gpiomux_setting audio_auxpcm[] = {
	/* Suspended state */
	{
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_NONE,
	},
	/* Active state */
	{
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_NONE,
	},
	};

	static struct gpiomux_setting audio_mbhc = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_NONE,
	};

	static struct gpiomux_setting audio_spkr_boost = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_NONE,
	};

	#if defined(CONFIG_KS8851) \|\| defined(CONFIG_KS8851_MODULE)
	static struct gpiomux_setting gpio_eth_config = {
	.pull = GPIOMUX_PULL_NONE,
	.drv = GPIOMUX_DRV_8MA,
	.func = GPIOMUX_FUNC_GPIO,
	};
	#endif

	static struct gpiomux_setting slimbus = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_KEEPER,
	};

	static struct gpiomux_setting wcnss_5wire_suspend_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_UP,
	};

	static struct gpiomux_setting wcnss_5wire_active_cfg = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_6MA,
	.pull = GPIOMUX_PULL_DOWN,
	};

	static struct gpiomux_setting atmel_resout_sus_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_6MA,
	.pull = GPIOMUX_PULL_DOWN,
	};

	static struct gpiomux_setting atmel_resout_act_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_6MA,
	.pull = GPIOMUX_PULL_UP,
	};

	static struct gpiomux_setting atmel_ldo_en_sus_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_6MA,
	.pull = GPIOMUX_PULL_DOWN,
	};

	static struct gpiomux_setting atmel_ldo_en_act_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_6MA,
	.pull = GPIOMUX_PULL_DOWN,
	};

	static struct gpiomux_setting atmel_int_act_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_UP,
	};

	static struct gpiomux_setting atmel_int_sus_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
	};
	#ifdef MSM8930_PHASE_2
	static struct gpiomux_setting hsusb_sus_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_NONE,
	.dir = GPIOMUX_OUT_LOW,
	};
	static struct msm_gpiomux_config msm8930_hsusb_configs[] = {
	{
	.gpio = 63, /* HSUSB_EXTERNAL_5V_LDO_EN */
	.settings = {
	[GPIOMUX_SUSPENDED] = &hsusb_sus_cfg,
	},
	},
	{
	.gpio = 97, /* HSUSB_5V_EN */
	.settings = {
	[GPIOMUX_SUSPENDED] = &hsusb_sus_cfg,
	},
	},
	};
	#endif

	static struct gpiomux_setting hap_lvl_shft_suspended_config = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
	};

	static struct gpiomux_setting hap_lvl_shft_active_config = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_UP,
	};

	static struct gpiomux_setting ap2mdm_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_DOWN,
	};

	static struct gpiomux_setting mdm2ap_status_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_NONE,
	};

	static struct gpiomux_setting mdm2ap_errfatal_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_16MA,
	.pull = GPIOMUX_PULL_DOWN,
	};

	static struct gpiomux_setting ap2mdm_kpdpwr_n_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_NONE,
	};

	static struct gpiomux_setting mdp_vsync_suspend_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
	};

	static struct gpiomux_setting mdp_vsync_active_cfg = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
	};

	#ifdef CONFIG_FB_MSM_HDMI_MSM_PANEL
	static struct gpiomux_setting hdmi_suspend_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
	};

	static struct gpiomux_setting hdmi_active_1_cfg = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_UP,
	};

	static struct gpiomux_setting hdmi_active_2_cfg = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
	};

	static struct gpiomux_setting hdmi_active_3_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_UP,
	.dir = GPIOMUX_IN,
	};

	static struct gpiomux_setting hdmi_active_4_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_UP,
	.dir = GPIOMUX_OUT_HIGH,
	};

	static struct gpiomux_setting hdmi_active_5_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_UP,
	.dir = GPIOMUX_OUT_HIGH,
	};

	#endif

	#if defined(CONFIG_KS8851) \|\| defined(CONFIG_KS8851_MODULE)
	static struct msm_gpiomux_config msm8960_ethernet_configs[] = {
	{
	.gpio = 90,
	.settings = {
	[GPIOMUX_SUSPENDED] = &gpio_eth_config,
	}
	},
	{
	.gpio = 89,
	.settings = {
	[GPIOMUX_SUSPENDED] = &gpio_eth_config,
	}
	},
	};
	#endif

	static struct msm_gpiomux_config msm8960_gsbi_configs[] __initdata = {
	{
	.gpio = 6, /* GSBI1 QUP SPI_DATA_MOSI */
	.settings = {
	[GPIOMUX_SUSPENDED] = &spi_suspended_config,
	[GPIOMUX_ACTIVE] = &spi_active,
	},
	},
	{
	.gpio = 7, /* GSBI1 QUP SPI_DATA_MISO */
	.settings = {
	[GPIOMUX_SUSPENDED] = &spi_suspended_config,
	[GPIOMUX_ACTIVE] = &spi_active,
	},
	},
	{
	.gpio = 8, /* GSBI1 QUP SPI_CS_N */
	.settings = {
	[GPIOMUX_SUSPENDED] = &spi_suspended_config,
	[GPIOMUX_ACTIVE] = &spi_active,
	},
	},
	{
	.gpio = 9, /* GSBI1 QUP SPI_CLK */
	.settings = {
	[GPIOMUX_SUSPENDED] = &spi_suspended_config,
	[GPIOMUX_ACTIVE] = &spi_active,
	},
	},
	{
	.gpio = 16, /* GSBI3 I2C QUP SDA */
	.settings = {
	[GPIOMUX_SUSPENDED] = &gsbi3_suspended_cfg,
	[GPIOMUX_ACTIVE] = &gsbi3_active_cfg,
	},
	},
	{
	.gpio = 17, /* GSBI3 I2C QUP SCL */
	.settings = {
	[GPIOMUX_SUSPENDED] = &gsbi3_suspended_cfg,
	[GPIOMUX_ACTIVE] = &gsbi3_active_cfg,
	},
	},
	{
	.gpio = 22, /* GSBI5 UART2 */
	.settings = {
	[GPIOMUX_SUSPENDED] = &gsbi5,
	},
	},
	{
	.gpio = 23, /* GSBI5 UART2 */
	.settings = {
	[GPIOMUX_SUSPENDED] = &gsbi5,
	},
	},
	{
	.gpio = 44, /* GSBI12 I2C QUP SDA */
	.settings = {
	[GPIOMUX_SUSPENDED] = &gsbi12,
	},
	},
	{
	.gpio = 95, /* GSBI9 I2C QUP SDA */
	.settings = {
	[GPIOMUX_SUSPENDED] = &gsbi9,
	},
	},
	{
	.gpio = 96, /* GSBI12 I2C QUP SCL */
	.settings = {
	[GPIOMUX_SUSPENDED] = &gsbi9,
	},
	},
	{
	.gpio = 45, /* GSBI12 I2C QUP SCL */
	.settings = {
	[GPIOMUX_SUSPENDED] = &gsbi12,
	},
	},
	{
	.gpio = 73, /* GSBI10 I2C QUP SDA */
	.settings = {
	[GPIOMUX_SUSPENDED] = &gsbi10,
	},
	},
	{
	.gpio = 74, /* GSBI10 I2C QUP SCL */
	.settings = {
	[GPIOMUX_SUSPENDED] = &gsbi10,
	},
	},
	};

	static struct msm_gpiomux_config msm8960_slimbus_config[] __initdata = {
	{
	.gpio = 60, /* slimbus data */
	.settings = {
	[GPIOMUX_SUSPENDED] = &slimbus,
	},
	},
	{
	.gpio = 61, /* slimbus clk */
	.settings = {
	[GPIOMUX_SUSPENDED] = &slimbus,
	},
	},
	};

	static struct msm_gpiomux_config msm8960_audio_codec_configs[] __initdata = {
	{
	.gpio = 59,
	.settings = {
	[GPIOMUX_SUSPENDED] = &cdc_mclk,
	},
	},
	};

	static struct msm_gpiomux_config msm8960_audio_mbhc_configs[] __initdata = {
	{
	.gpio = 37,
	.settings = {
	[GPIOMUX_SUSPENDED] = &audio_mbhc,
	},
	},
	};

	static struct msm_gpiomux_config msm8960_audio_spkr_configs[] __initdata = {
	{
	.gpio = 15,
	.settings = {
	[GPIOMUX_SUSPENDED] = &audio_spkr_boost,
	},
	},
	};


	static struct msm_gpiomux_config msm8960_audio_auxpcm_configs[] __initdata = {
	{
	.gpio = 63,
	.settings = {
	[GPIOMUX_SUSPENDED] = &audio_auxpcm[0],
	[GPIOMUX_ACTIVE] = &audio_auxpcm[1],
	},
	},
	{
	.gpio = 64,
	.settings = {
	[GPIOMUX_SUSPENDED] = &audio_auxpcm[0],
	[GPIOMUX_ACTIVE] = &audio_auxpcm[1],
	},
	},
	{
	.gpio = 65,
	.settings = {
	[GPIOMUX_SUSPENDED] = &audio_auxpcm[0],
	[GPIOMUX_ACTIVE] = &audio_auxpcm[1],
	},
	},
	{
	.gpio = 66,
	.settings = {
	[GPIOMUX_SUSPENDED] = &audio_auxpcm[0],
	[GPIOMUX_ACTIVE] = &audio_auxpcm[1],
	},
	},
	};

	static struct msm_gpiomux_config wcnss_5wire_interface[] = {
	{
	.gpio = 84,
	.settings = {
	[GPIOMUX_ACTIVE] = &wcnss_5wire_active_cfg,
	[GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg,
	},
	},
	{
	.gpio = 85,
	.settings = {
	[GPIOMUX_ACTIVE] = &wcnss_5wire_active_cfg,
	[GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg,
	},
	},
	{
	.gpio = 86,
	.settings = {
	[GPIOMUX_ACTIVE] = &wcnss_5wire_active_cfg,
	[GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg,
	},
	},
	{
	.gpio = 87,
	.settings = {
	[GPIOMUX_ACTIVE] = &wcnss_5wire_active_cfg,
	[GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg,
	},
	},
	{
	.gpio = 88,
	.settings = {
	[GPIOMUX_ACTIVE] = &wcnss_5wire_active_cfg,
	[GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg,
	},
	},
	};

	static struct msm_gpiomux_config msm8960_atmel_configs[] __initdata = {
	{ /* TS INTERRUPT */
	.gpio = 11,
	.settings = {
	[GPIOMUX_ACTIVE] = &atmel_int_act_cfg,
	[GPIOMUX_SUSPENDED] = &atmel_int_sus_cfg,
	},
	},
	{ /* TS LDO ENABLE */
	.gpio = 50,
	.settings = {
	[GPIOMUX_ACTIVE] = &atmel_ldo_en_act_cfg,
	[GPIOMUX_SUSPENDED] = &atmel_ldo_en_sus_cfg,
	},
	},
	{ /* TS RESOUT */
	.gpio = 52,
	.settings = {
	[GPIOMUX_ACTIVE] = &atmel_resout_act_cfg,
	[GPIOMUX_SUSPENDED] = &atmel_resout_sus_cfg,
	},
	},
	};

	static struct msm_gpiomux_config hap_lvl_shft_config[] __initdata = {
	{
	.gpio = 47,
	.settings = {
	[GPIOMUX_SUSPENDED] = &hap_lvl_shft_suspended_config,
	[GPIOMUX_ACTIVE] = &hap_lvl_shft_active_config,
	},
	},
	};

	static struct msm_gpiomux_config mdm_configs[] __initdata = {
	/* AP2MDM_STATUS */
	{
	.gpio = 94,
	.settings = {
	[GPIOMUX_SUSPENDED] = &ap2mdm_cfg,
	}
	},
	/* MDM2AP_STATUS */
	{
	.gpio = 69,
	.settings = {
	[GPIOMUX_SUSPENDED] = &mdm2ap_status_cfg,
	}
	},
	/* MDM2AP_ERRFATAL */
	{
	.gpio = 70,
	.settings = {
	[GPIOMUX_SUSPENDED] = &mdm2ap_errfatal_cfg,
	}
	},
	/* AP2MDM_ERRFATAL */
	{
	.gpio = 95,
	.settings = {
	[GPIOMUX_SUSPENDED] = &ap2mdm_cfg,
	}
	},
	/* AP2MDM_KPDPWR_N */
	{
	.gpio = 81,
	.settings = {
	[GPIOMUX_SUSPENDED] = &ap2mdm_kpdpwr_n_cfg,
	}
	},
	/* AP2MDM_PMIC_RESET_N */
	{
	.gpio = 80,
	.settings = {
	[GPIOMUX_SUSPENDED] = &ap2mdm_kpdpwr_n_cfg,
	}
	}
	};

	static struct msm_gpiomux_config msm8960_mdp_vsync_configs[] __initdata = {
	{
	.gpio = 0,
	.settings = {
	[GPIOMUX_ACTIVE] = &mdp_vsync_active_cfg,
	[GPIOMUX_SUSPENDED] = &mdp_vsync_suspend_cfg,
	},
	}
	};

	#ifdef CONFIG_FB_MSM_HDMI_MSM_PANEL
	static struct msm_gpiomux_config msm8960_hdmi_configs[] __initdata = {
	{
	.gpio = 99,
	.settings = {
	[GPIOMUX_ACTIVE] = &hdmi_active_1_cfg,
	[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
	},
	},
	{
	.gpio = 100,
	.settings = {
	[GPIOMUX_ACTIVE] = &hdmi_active_1_cfg,
	[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
	},
	},
	{
	.gpio = 101,
	.settings = {
	[GPIOMUX_ACTIVE] = &hdmi_active_1_cfg,
	[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
	},
	},
	{
	.gpio = 102,
	.settings = {
	[GPIOMUX_ACTIVE] = &hdmi_active_2_cfg,
	[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
	},
	},

	};

	static struct msm_gpiomux_config msm8930_mhl_configs[] __initdata = {
	{
	.gpio = 72,
	.settings = {
	[GPIOMUX_ACTIVE] = &hdmi_active_3_cfg,
	[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
	},
	},
	{
	.gpio = 71,
	.settings = {
	[GPIOMUX_ACTIVE] = &hdmi_active_4_cfg,
	[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
	},
	},
	{
	.gpio = 73,
	.settings = {
	[GPIOMUX_ACTIVE] = &hdmi_active_5_cfg,
	[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
	},
	},

	};
	#endif

	static struct gpiomux_setting haptics_active_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_UP,
	};
	static struct gpiomux_setting haptics_suspend_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_DOWN,
	};

	static struct msm_gpiomux_config msm8930_haptics_configs[] __initdata = {
	{
	.gpio = 77,
	.settings = {
	[GPIOMUX_ACTIVE] = &haptics_active_cfg,
	[GPIOMUX_SUSPENDED] = &haptics_suspend_cfg,
	},
	},
	{
	.gpio = 78,
	.settings = {
	[GPIOMUX_ACTIVE] = &haptics_active_cfg,
	[GPIOMUX_SUSPENDED] = &haptics_suspend_cfg,
	},
	},
	};

	static struct gpiomux_setting sd_det_line = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_NONE,
	};

	static struct msm_gpiomux_config msm8930_sd_det_config[] __initdata = {
	{
	.gpio = 94, /* SD Card Detect Line */
	.settings = {
	[GPIOMUX_SUSPENDED] = &sd_det_line,
	[GPIOMUX_ACTIVE] = &sd_det_line,
	},
	},
	};

	static struct gpiomux_setting gyro_int_line = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_NONE,
	};

	static struct msm_gpiomux_config msm8930_gyro_int_config[] __initdata = {
	{
	.gpio = 69, /* Gyro Interrupt Line */
	.settings = {
	[GPIOMUX_SUSPENDED] = &gyro_int_line,
	[GPIOMUX_ACTIVE] = &gyro_int_line,
	},
	},
	};

	int __init msm8930_init_gpiomux(void)
	{
	int rc = msm_gpiomux_init(NR_GPIO_IRQS);
	if (rc) {
	pr_err(KERN_ERR "msm_gpiomux_init failed %d\n", rc);
	return rc;
	}

	#if defined(CONFIG_KS8851) \|\| defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm8960_ethernet_configs,
	ARRAY_SIZE(msm8960_ethernet_configs));
	#endif

	msm_gpiomux_install(msm8960_gsbi_configs,
	ARRAY_SIZE(msm8960_gsbi_configs));

	msm_gpiomux_install(msm8960_atmel_configs,
	ARRAY_SIZE(msm8960_atmel_configs));

	msm_gpiomux_install(msm8960_slimbus_config,
	ARRAY_SIZE(msm8960_slimbus_config));

	msm_gpiomux_install(msm8960_audio_codec_configs,
	ARRAY_SIZE(msm8960_audio_codec_configs));

	msm_gpiomux_install(msm8960_audio_mbhc_configs,
	ARRAY_SIZE(msm8960_audio_mbhc_configs));

	msm_gpiomux_install(msm8960_audio_spkr_configs,
	ARRAY_SIZE(msm8960_audio_spkr_configs));

	msm_gpiomux_install(msm8960_audio_auxpcm_configs,
	ARRAY_SIZE(msm8960_audio_auxpcm_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
	ARRAY_SIZE(wcnss_5wire_interface));

	if (machine_is_msm8930_mtp() \|\| machine_is_msm8930_fluid() \|\|
	machine_is_msm8930_cdp()) {
	msm_gpiomux_install(hap_lvl_shft_config,
	ARRAY_SIZE(hap_lvl_shft_config));
	#ifdef MSM8930_PHASE_2
	msm_gpiomux_install(msm8930_hsusb_configs,
	ARRAY_SIZE(msm8930_hsusb_configs));
	#endif
	}

	if (PLATFORM_IS_CHARM25())
	msm_gpiomux_install(mdm_configs,
	ARRAY_SIZE(mdm_configs));

	if (machine_is_msm8930_cdp() \|\| machine_is_msm8930_mtp()
	\|\| machine_is_msm8930_fluid())
	msm_gpiomux_install(msm8930_haptics_configs,
	ARRAY_SIZE(msm8930_haptics_configs));

	#ifdef CONFIG_FB_MSM_HDMI_MSM_PANEL
	msm_gpiomux_install(msm8960_hdmi_configs,
	ARRAY_SIZE(msm8960_hdmi_configs));
	if (machine_is_msm8930_fluid())
	msm_gpiomux_install(msm8930_mhl_configs,
	ARRAY_SIZE(msm8930_mhl_configs));
	#endif

	msm_gpiomux_install(msm8960_mdp_vsync_configs,
	ARRAY_SIZE(msm8960_mdp_vsync_configs));

	msm_gpiomux_install(msm8930_sd_det_config,
	ARRAY_SIZE(msm8930_sd_det_config));

	if (machine_is_msm8930_fluid() \|\| machine_is_msm8930_mtp())
	msm_gpiomux_install(msm8930_gyro_int_config,
	ARRAY_SIZE(msm8930_gyro_int_config));

	return 0;
	}