| #ifndef __ARCH_DESC_H |
| #define __ARCH_DESC_H |
| |
| #include <asm/ldt.h> |
| #include <asm/segment.h> |
| |
| #ifndef __ASSEMBLY__ |
| |
| #include <linux/preempt.h> |
| #include <linux/smp.h> |
| #include <linux/percpu.h> |
| |
| #include <asm/mmu.h> |
| |
| extern struct desc_struct cpu_gdt_table[GDT_ENTRIES]; |
| |
| struct Xgt_desc_struct { |
| unsigned short size; |
| unsigned long address __attribute__((packed)); |
| unsigned short pad; |
| } __attribute__ ((packed)); |
| |
| extern struct Xgt_desc_struct idt_descr; |
| DECLARE_PER_CPU(struct Xgt_desc_struct, cpu_gdt_descr); |
| extern struct Xgt_desc_struct early_gdt_descr; |
| |
| static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu) |
| { |
| return (struct desc_struct *)per_cpu(cpu_gdt_descr, cpu).address; |
| } |
| |
| extern struct desc_struct idt_table[]; |
| extern void set_intr_gate(unsigned int irq, void * addr); |
| |
| static inline void pack_descriptor(__u32 *a, __u32 *b, |
| unsigned long base, unsigned long limit, unsigned char type, unsigned char flags) |
| { |
| *a = ((base & 0xffff) << 16) | (limit & 0xffff); |
| *b = (base & 0xff000000) | ((base & 0xff0000) >> 16) | |
| (limit & 0x000f0000) | ((type & 0xff) << 8) | ((flags & 0xf) << 20); |
| } |
| |
| static inline void pack_gate(__u32 *a, __u32 *b, |
| unsigned long base, unsigned short seg, unsigned char type, unsigned char flags) |
| { |
| *a = (seg << 16) | (base & 0xffff); |
| *b = (base & 0xffff0000) | ((type & 0xff) << 8) | (flags & 0xff); |
| } |
| |
| #define DESCTYPE_LDT 0x82 /* present, system, DPL-0, LDT */ |
| #define DESCTYPE_TSS 0x89 /* present, system, DPL-0, 32-bit TSS */ |
| #define DESCTYPE_TASK 0x85 /* present, system, DPL-0, task gate */ |
| #define DESCTYPE_INT 0x8e /* present, system, DPL-0, interrupt gate */ |
| #define DESCTYPE_TRAP 0x8f /* present, system, DPL-0, trap gate */ |
| #define DESCTYPE_DPL3 0x60 /* DPL-3 */ |
| #define DESCTYPE_S 0x10 /* !system */ |
| |
| #ifdef CONFIG_PARAVIRT |
| #include <asm/paravirt.h> |
| #else |
| #define load_TR_desc() __asm__ __volatile__("ltr %w0"::"q" (GDT_ENTRY_TSS*8)) |
| |
| #define load_gdt(dtr) __asm__ __volatile("lgdt %0"::"m" (*dtr)) |
| #define load_idt(dtr) __asm__ __volatile("lidt %0"::"m" (*dtr)) |
| #define load_tr(tr) __asm__ __volatile("ltr %0"::"m" (tr)) |
| #define load_ldt(ldt) __asm__ __volatile("lldt %0"::"m" (ldt)) |
| |
| #define store_gdt(dtr) __asm__ ("sgdt %0":"=m" (*dtr)) |
| #define store_idt(dtr) __asm__ ("sidt %0":"=m" (*dtr)) |
| #define store_tr(tr) __asm__ ("str %0":"=m" (tr)) |
| #define store_ldt(ldt) __asm__ ("sldt %0":"=m" (ldt)) |
| |
| #if TLS_SIZE != 24 |
| # error update this code. |
| #endif |
| |
| static inline void load_TLS(struct thread_struct *t, unsigned int cpu) |
| { |
| #define C(i) get_cpu_gdt_table(cpu)[GDT_ENTRY_TLS_MIN + i] = t->tls_array[i] |
| C(0); C(1); C(2); |
| #undef C |
| } |
| |
| #define write_ldt_entry(dt, entry, a, b) write_dt_entry(dt, entry, a, b) |
| #define write_gdt_entry(dt, entry, a, b) write_dt_entry(dt, entry, a, b) |
| #define write_idt_entry(dt, entry, a, b) write_dt_entry(dt, entry, a, b) |
| |
| static inline void write_dt_entry(void *dt, int entry, __u32 entry_a, __u32 entry_b) |
| { |
| __u32 *lp = (__u32 *)((char *)dt + entry*8); |
| *lp = entry_a; |
| *(lp+1) = entry_b; |
| } |
| |
| #define set_ldt native_set_ldt |
| #endif /* CONFIG_PARAVIRT */ |
| |
| static inline fastcall void native_set_ldt(const void *addr, |
| unsigned int entries) |
| { |
| if (likely(entries == 0)) |
| __asm__ __volatile__("lldt %w0"::"q" (0)); |
| else { |
| unsigned cpu = smp_processor_id(); |
| __u32 a, b; |
| |
| pack_descriptor(&a, &b, (unsigned long)addr, |
| entries * sizeof(struct desc_struct) - 1, |
| DESCTYPE_LDT, 0); |
| write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT, a, b); |
| __asm__ __volatile__("lldt %w0"::"q" (GDT_ENTRY_LDT*8)); |
| } |
| } |
| |
| static inline void _set_gate(int gate, unsigned int type, void *addr, unsigned short seg) |
| { |
| __u32 a, b; |
| pack_gate(&a, &b, (unsigned long)addr, seg, type, 0); |
| write_idt_entry(idt_table, gate, a, b); |
| } |
| |
| static inline void __set_tss_desc(unsigned int cpu, unsigned int entry, const void *addr) |
| { |
| __u32 a, b; |
| pack_descriptor(&a, &b, (unsigned long)addr, |
| offsetof(struct tss_struct, __cacheline_filler) - 1, |
| DESCTYPE_TSS, 0); |
| write_gdt_entry(get_cpu_gdt_table(cpu), entry, a, b); |
| } |
| |
| |
| #define set_tss_desc(cpu,addr) __set_tss_desc(cpu, GDT_ENTRY_TSS, addr) |
| |
| #define LDT_entry_a(info) \ |
| ((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff)) |
| |
| #define LDT_entry_b(info) \ |
| (((info)->base_addr & 0xff000000) | \ |
| (((info)->base_addr & 0x00ff0000) >> 16) | \ |
| ((info)->limit & 0xf0000) | \ |
| (((info)->read_exec_only ^ 1) << 9) | \ |
| ((info)->contents << 10) | \ |
| (((info)->seg_not_present ^ 1) << 15) | \ |
| ((info)->seg_32bit << 22) | \ |
| ((info)->limit_in_pages << 23) | \ |
| ((info)->useable << 20) | \ |
| 0x7000) |
| |
| #define LDT_empty(info) (\ |
| (info)->base_addr == 0 && \ |
| (info)->limit == 0 && \ |
| (info)->contents == 0 && \ |
| (info)->read_exec_only == 1 && \ |
| (info)->seg_32bit == 0 && \ |
| (info)->limit_in_pages == 0 && \ |
| (info)->seg_not_present == 1 && \ |
| (info)->useable == 0 ) |
| |
| static inline void clear_LDT(void) |
| { |
| set_ldt(NULL, 0); |
| } |
| |
| /* |
| * load one particular LDT into the current CPU |
| */ |
| static inline void load_LDT_nolock(mm_context_t *pc) |
| { |
| set_ldt(pc->ldt, pc->size); |
| } |
| |
| static inline void load_LDT(mm_context_t *pc) |
| { |
| preempt_disable(); |
| load_LDT_nolock(pc); |
| preempt_enable(); |
| } |
| |
| static inline unsigned long get_desc_base(unsigned long *desc) |
| { |
| unsigned long base; |
| base = ((desc[0] >> 16) & 0x0000ffff) | |
| ((desc[1] << 16) & 0x00ff0000) | |
| (desc[1] & 0xff000000); |
| return base; |
| } |
| |
| #else /* __ASSEMBLY__ */ |
| |
| /* |
| * GET_DESC_BASE reads the descriptor base of the specified segment. |
| * |
| * Args: |
| * idx - descriptor index |
| * gdt - GDT pointer |
| * base - 32bit register to which the base will be written |
| * lo_w - lo word of the "base" register |
| * lo_b - lo byte of the "base" register |
| * hi_b - hi byte of the low word of the "base" register |
| * |
| * Example: |
| * GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah) |
| * Will read the base address of GDT_ENTRY_ESPFIX_SS and put it into %eax. |
| */ |
| #define GET_DESC_BASE(idx, gdt, base, lo_w, lo_b, hi_b) \ |
| movb idx*8+4(gdt), lo_b; \ |
| movb idx*8+7(gdt), hi_b; \ |
| shll $16, base; \ |
| movw idx*8+2(gdt), lo_w; |
| |
| #endif /* !__ASSEMBLY__ */ |
| |
| #endif |