ARM: S5PC1xx: add platform helpers for i2c adapter devices
Samsung S5PC100 has I2C bus controller compatible with the one known from
previous SoCs series. Add required platform setup and support code that
it can be used with s3c2410-i2c driver.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
index 6ac48a6..1fc25b9 100644
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -42,7 +42,7 @@
help
Common setup code for S5PC1XX with an 24bpp RGB display helper.
-config S5PC100_SETUP_I2C0
+config S5PC1XX_SETUP_I2C0
bool
default y
help
@@ -51,7 +51,7 @@
Note, currently since i2c0 is always compiled, this setup helper
is always compiled with it.
-config S5PC100_SETUP_I2C1
+config S5PC1XX_SETUP_I2C1
bool
help
Common setup code for i2c bus 1.
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
index 3d2ac71..40ee957 100644
--- a/arch/arm/plat-s5pc1xx/Makefile
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -26,5 +26,5 @@
obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o
obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c
index 3d00c02..5e4a7c3 100644
--- a/arch/arm/plat-s5pc1xx/setup-i2c0.c
+++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c
@@ -17,9 +17,14 @@
struct platform_device; /* don't need the contents */
+#include <linux/gpio.h>
#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
- /* Pin configuration would be needed */
+ s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c
index c8f3ca4..a0a8b4a 100644
--- a/arch/arm/plat-s5pc1xx/setup-i2c1.c
+++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c
@@ -17,9 +17,14 @@
struct platform_device; /* don't need the contents */
+#include <linux/gpio.h>
#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
- /* Pin configuration would be needed */
+ s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP);
}