| /* |
| * Copyright (C) 2007-2009 ST-Ericsson AB |
| * License terms: GNU General Public License (GPL) version 2 |
| * AB3100 core access functions |
| * Author: Linus Walleij <linus.walleij@stericsson.com> |
| * |
| * ABX500 core access functions. |
| * The abx500 interface is used for the Analog Baseband chip |
| * ab3100, ab5500, and ab8500. |
| * |
| * Author: Mattias Wallin <mattias.wallin@stericsson.com> |
| * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> |
| * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com> |
| * Author: Rickard Andersson <rickard.andersson@stericsson.com> |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/regulator/machine.h> |
| |
| #ifndef MFD_ABX500_H |
| #define MFD_ABX500_H |
| |
| #define AB3100_P1A 0xc0 |
| #define AB3100_P1B 0xc1 |
| #define AB3100_P1C 0xc2 |
| #define AB3100_P1D 0xc3 |
| #define AB3100_P1E 0xc4 |
| #define AB3100_P1F 0xc5 |
| #define AB3100_P1G 0xc6 |
| #define AB3100_R2A 0xc7 |
| #define AB3100_R2B 0xc8 |
| #define AB5500_1_0 0x20 |
| #define AB5500_1_1 0x21 |
| #define AB5500_2_0 0x24 |
| |
| /* AB8500 CIDs*/ |
| #define AB8500_CUTEARLY 0x00 |
| #define AB8500_CUT1P0 0x10 |
| #define AB8500_CUT1P1 0x11 |
| #define AB8500_CUT2P0 0x20 |
| #define AB8500_CUT3P0 0x30 |
| |
| /* |
| * AB3100, EVENTA1, A2 and A3 event register flags |
| * these are catenated into a single 32-bit flag in the code |
| * for event notification broadcasts. |
| */ |
| #define AB3100_EVENTA1_ONSWA (0x01<<16) |
| #define AB3100_EVENTA1_ONSWB (0x02<<16) |
| #define AB3100_EVENTA1_ONSWC (0x04<<16) |
| #define AB3100_EVENTA1_DCIO (0x08<<16) |
| #define AB3100_EVENTA1_OVER_TEMP (0x10<<16) |
| #define AB3100_EVENTA1_SIM_OFF (0x20<<16) |
| #define AB3100_EVENTA1_VBUS (0x40<<16) |
| #define AB3100_EVENTA1_VSET_USB (0x80<<16) |
| |
| #define AB3100_EVENTA2_READY_TX (0x01<<8) |
| #define AB3100_EVENTA2_READY_RX (0x02<<8) |
| #define AB3100_EVENTA2_OVERRUN_ERROR (0x04<<8) |
| #define AB3100_EVENTA2_FRAMING_ERROR (0x08<<8) |
| #define AB3100_EVENTA2_CHARG_OVERCURRENT (0x10<<8) |
| #define AB3100_EVENTA2_MIDR (0x20<<8) |
| #define AB3100_EVENTA2_BATTERY_REM (0x40<<8) |
| #define AB3100_EVENTA2_ALARM (0x80<<8) |
| |
| #define AB3100_EVENTA3_ADC_TRIG5 (0x01) |
| #define AB3100_EVENTA3_ADC_TRIG4 (0x02) |
| #define AB3100_EVENTA3_ADC_TRIG3 (0x04) |
| #define AB3100_EVENTA3_ADC_TRIG2 (0x08) |
| #define AB3100_EVENTA3_ADC_TRIGVBAT (0x10) |
| #define AB3100_EVENTA3_ADC_TRIGVTX (0x20) |
| #define AB3100_EVENTA3_ADC_TRIG1 (0x40) |
| #define AB3100_EVENTA3_ADC_TRIG0 (0x80) |
| |
| /* AB3100, STR register flags */ |
| #define AB3100_STR_ONSWA (0x01) |
| #define AB3100_STR_ONSWB (0x02) |
| #define AB3100_STR_ONSWC (0x04) |
| #define AB3100_STR_DCIO (0x08) |
| #define AB3100_STR_BOOT_MODE (0x10) |
| #define AB3100_STR_SIM_OFF (0x20) |
| #define AB3100_STR_BATT_REMOVAL (0x40) |
| #define AB3100_STR_VBUS (0x80) |
| |
| /* |
| * AB3100 contains 8 regulators, one external regulator controller |
| * and a buck converter, further the LDO E and buck converter can |
| * have separate settings if they are in sleep mode, this is |
| * modeled as a separate regulator. |
| */ |
| #define AB3100_NUM_REGULATORS 10 |
| |
| /** |
| * struct ab3100 |
| * @access_mutex: lock out concurrent accesses to the AB3100 registers |
| * @dev: pointer to the containing device |
| * @i2c_client: I2C client for this chip |
| * @testreg_client: secondary client for test registers |
| * @chip_name: name of this chip variant |
| * @chip_id: 8 bit chip ID for this chip variant |
| * @event_subscribers: event subscribers are listed here |
| * @startup_events: a copy of the first reading of the event registers |
| * @startup_events_read: whether the first events have been read |
| * |
| * This struct is PRIVATE and devices using it should NOT |
| * access ANY fields. It is used as a token for calling the |
| * AB3100 functions. |
| */ |
| struct ab3100 { |
| struct mutex access_mutex; |
| struct device *dev; |
| struct i2c_client *i2c_client; |
| struct i2c_client *testreg_client; |
| char chip_name[32]; |
| u8 chip_id; |
| struct blocking_notifier_head event_subscribers; |
| u8 startup_events[3]; |
| bool startup_events_read; |
| }; |
| |
| /** |
| * struct ab3100_platform_data |
| * Data supplied to initialize board connections to the AB3100 |
| * @reg_constraints: regulator constraints for target board |
| * the order of these constraints are: LDO A, C, D, E, |
| * F, G, H, K, EXT and BUCK. |
| * @reg_initvals: initial values for the regulator registers |
| * plus two sleep settings for LDO E and the BUCK converter. |
| * exactly AB3100_NUM_REGULATORS+2 values must be sent in. |
| * Order: LDO A, C, E, E sleep, F, G, H, K, EXT, BUCK, |
| * BUCK sleep, LDO D. (LDO D need to be initialized last.) |
| * @external_voltage: voltage level of the external regulator. |
| */ |
| struct ab3100_platform_data { |
| struct regulator_init_data reg_constraints[AB3100_NUM_REGULATORS]; |
| u8 reg_initvals[AB3100_NUM_REGULATORS+2]; |
| int external_voltage; |
| }; |
| |
| int ab3100_event_register(struct ab3100 *ab3100, |
| struct notifier_block *nb); |
| int ab3100_event_unregister(struct ab3100 *ab3100, |
| struct notifier_block *nb); |
| |
| /** |
| * struct abx500_init_setting |
| * Initial value of the registers for driver to use during setup. |
| */ |
| struct abx500_init_settings { |
| u8 bank; |
| u8 reg; |
| u8 setting; |
| }; |
| |
| int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg, |
| u8 value); |
| int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg, |
| u8 *value); |
| int abx500_get_register_page_interruptible(struct device *dev, u8 bank, |
| u8 first_reg, u8 *regvals, u8 numregs); |
| int abx500_set_register_page_interruptible(struct device *dev, u8 bank, |
| u8 first_reg, u8 *regvals, u8 numregs); |
| /** |
| * abx500_mask_and_set_register_inerruptible() - Modifies selected bits of a |
| * target register |
| * |
| * @dev: The AB sub device. |
| * @bank: The i2c bank number. |
| * @bitmask: The bit mask to use. |
| * @bitvalues: The new bit values. |
| * |
| * Updates the value of an AB register: |
| * value -> ((value & ~bitmask) | (bitvalues & bitmask)) |
| */ |
| int abx500_mask_and_set_register_interruptible(struct device *dev, u8 bank, |
| u8 reg, u8 bitmask, u8 bitvalues); |
| int abx500_get_chip_id(struct device *dev); |
| int abx500_event_registers_startup_state_get(struct device *dev, u8 *event); |
| int abx500_startup_irq_enabled(struct device *dev, unsigned int irq); |
| |
| struct abx500_ops { |
| int (*get_chip_id) (struct device *); |
| int (*get_register) (struct device *, u8, u8, u8 *); |
| int (*set_register) (struct device *, u8, u8, u8); |
| int (*get_register_page) (struct device *, u8, u8, u8 *, u8); |
| int (*set_register_page) (struct device *, u8, u8, u8 *, u8); |
| int (*mask_and_set_register) (struct device *, u8, u8, u8, u8); |
| int (*event_registers_startup_state_get) (struct device *, u8 *); |
| int (*startup_irq_enabled) (struct device *, unsigned int); |
| }; |
| |
| int abx500_register_ops(struct device *core_dev, struct abx500_ops *ops); |
| void abx500_remove_ops(struct device *dev); |
| #endif |