| /* |
| * MPC8610 HPCD Device Tree Source |
| * |
| * Copyright 2007-2008 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License Version 2 as published |
| * by the Free Software Foundation. |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| model = "MPC8610HPCD"; |
| compatible = "fsl,MPC8610HPCD"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| serial0 = &serial0; |
| serial1 = &serial1; |
| pci0 = &pci0; |
| pci1 = &pci1; |
| pci2 = &pci2; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,8610@0 { |
| device_type = "cpu"; |
| reg = <0>; |
| d-cache-line-size = <32>; |
| i-cache-line-size = <32>; |
| d-cache-size = <32768>; // L1 |
| i-cache-size = <32768>; // L1 |
| timebase-frequency = <0>; // From uboot |
| bus-frequency = <0>; // From uboot |
| clock-frequency = <0>; // From uboot |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x00000000 0x20000000>; // 512M at 0x0 |
| }; |
| |
| localbus@e0005000 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8610-elbc", "fsl,elbc", "simple-bus"; |
| reg = <0xe0005000 0x1000>; |
| interrupts = <19 2>; |
| interrupt-parent = <&mpic>; |
| ranges = <0 0 0xf8000000 0x08000000 |
| 1 0 0xf0000000 0x08000000 |
| 2 0 0xe8400000 0x00008000 |
| 4 0 0xe8440000 0x00008000 |
| 5 0 0xe8480000 0x00008000 |
| 6 0 0xe84c0000 0x00008000 |
| 3 0 0xe8000000 0x00000020>; |
| |
| flash@0,0 { |
| compatible = "cfi-flash"; |
| reg = <0 0 0x8000000>; |
| bank-width = <2>; |
| device-width = <1>; |
| }; |
| |
| flash@1,0 { |
| compatible = "cfi-flash"; |
| reg = <1 0 0x8000000>; |
| bank-width = <2>; |
| device-width = <1>; |
| }; |
| |
| flash@2,0 { |
| compatible = "fsl,mpc8610-fcm-nand", |
| "fsl,elbc-fcm-nand"; |
| reg = <2 0 0x8000>; |
| }; |
| |
| flash@4,0 { |
| compatible = "fsl,mpc8610-fcm-nand", |
| "fsl,elbc-fcm-nand"; |
| reg = <4 0 0x8000>; |
| }; |
| |
| flash@5,0 { |
| compatible = "fsl,mpc8610-fcm-nand", |
| "fsl,elbc-fcm-nand"; |
| reg = <5 0 0x8000>; |
| }; |
| |
| flash@6,0 { |
| compatible = "fsl,mpc8610-fcm-nand", |
| "fsl,elbc-fcm-nand"; |
| reg = <6 0 0x8000>; |
| }; |
| |
| board-control@3,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,fpga-pixis"; |
| reg = <3 0 0x20>; |
| ranges = <0 3 0 0x20>; |
| |
| sdcsr_pio: gpio-controller@a { |
| #gpio-cells = <2>; |
| compatible = "fsl,fpga-pixis-gpio-bank"; |
| reg = <0xa 1>; |
| gpio-controller; |
| }; |
| }; |
| }; |
| |
| soc@e0000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #interrupt-cells = <2>; |
| device_type = "soc"; |
| compatible = "fsl,mpc8610-immr", "simple-bus"; |
| ranges = <0x0 0xe0000000 0x00100000>; |
| bus-frequency = <0>; |
| |
| mcm-law@0 { |
| compatible = "fsl,mcm-law"; |
| reg = <0x0 0x1000>; |
| fsl,num-laws = <10>; |
| }; |
| |
| mcm@1000 { |
| compatible = "fsl,mpc8610-mcm", "fsl,mcm"; |
| reg = <0x1000 0x1000>; |
| interrupts = <17 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| i2c@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| compatible = "fsl-i2c"; |
| reg = <0x3000 0x100>; |
| interrupts = <43 2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| |
| cs4270:codec@4f { |
| compatible = "cirrus,cs4270"; |
| reg = <0x4f>; |
| /* MCLK source is a stand-alone oscillator */ |
| clock-frequency = <12288000>; |
| }; |
| }; |
| |
| i2c@3100 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <1>; |
| compatible = "fsl-i2c"; |
| reg = <0x3100 0x100>; |
| interrupts = <43 2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| }; |
| |
| serial0: serial@4500 { |
| cell-index = <0>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4500 0x100>; |
| clock-frequency = <0>; |
| interrupts = <42 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| serial1: serial@4600 { |
| cell-index = <1>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4600 0x100>; |
| clock-frequency = <0>; |
| interrupts = <42 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| spi@7000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,mpc8610-spi", "fsl,spi"; |
| reg = <0x7000 0x40>; |
| cell-index = <0>; |
| interrupts = <59 2>; |
| interrupt-parent = <&mpic>; |
| mode = "cpu"; |
| gpios = <&sdcsr_pio 7 0>; |
| |
| mmc-slot@0 { |
| compatible = "fsl,mpc8610hpcd-mmc-slot", |
| "mmc-spi-slot"; |
| reg = <0>; |
| gpios = <&sdcsr_pio 0 1 /* nCD */ |
| &sdcsr_pio 1 0>; /* WP */ |
| voltage-ranges = <3300 3300>; |
| spi-max-frequency = <50000000>; |
| }; |
| }; |
| |
| display@2c000 { |
| compatible = "fsl,diu"; |
| reg = <0x2c000 100>; |
| interrupts = <72 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| mpic: interrupt-controller@40000 { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <0x40000 0x40000>; |
| compatible = "chrp,open-pic"; |
| device_type = "open-pic"; |
| }; |
| |
| msi@41600 { |
| compatible = "fsl,mpc8610-msi", "fsl,mpic-msi"; |
| reg = <0x41600 0x80>; |
| msi-available-ranges = <0 0x100>; |
| interrupts = < |
| 0xe0 0 |
| 0xe1 0 |
| 0xe2 0 |
| 0xe3 0 |
| 0xe4 0 |
| 0xe5 0 |
| 0xe6 0 |
| 0xe7 0>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| global-utilities@e0000 { |
| compatible = "fsl,mpc8610-guts"; |
| reg = <0xe0000 0x1000>; |
| fsl,has-rstcr; |
| }; |
| |
| wdt@e4000 { |
| compatible = "fsl,mpc8610-wdt"; |
| reg = <0xe4000 0x100>; |
| }; |
| |
| ssi@16000 { |
| compatible = "fsl,mpc8610-ssi"; |
| cell-index = <0>; |
| reg = <0x16000 0x100>; |
| interrupt-parent = <&mpic>; |
| interrupts = <62 2>; |
| fsl,mode = "i2s-slave"; |
| codec-handle = <&cs4270>; |
| fsl,playback-dma = <&dma00>; |
| fsl,capture-dma = <&dma01>; |
| fsl,fifo-depth = <8>; |
| }; |
| |
| ssi@16100 { |
| compatible = "fsl,mpc8610-ssi"; |
| cell-index = <1>; |
| reg = <0x16100 0x100>; |
| interrupt-parent = <&mpic>; |
| interrupts = <63 2>; |
| fsl,fifo-depth = <8>; |
| }; |
| |
| dma@21300 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma"; |
| cell-index = <0>; |
| reg = <0x21300 0x4>; /* DMA general status register */ |
| ranges = <0x0 0x21100 0x200>; |
| |
| dma00: dma-channel@0 { |
| compatible = "fsl,mpc8610-dma-channel", |
| "fsl,ssi-dma-channel"; |
| cell-index = <0>; |
| reg = <0x0 0x80>; |
| interrupt-parent = <&mpic>; |
| interrupts = <20 2>; |
| }; |
| dma01: dma-channel@1 { |
| compatible = "fsl,mpc8610-dma-channel", |
| "fsl,ssi-dma-channel"; |
| cell-index = <1>; |
| reg = <0x80 0x80>; |
| interrupt-parent = <&mpic>; |
| interrupts = <21 2>; |
| }; |
| dma-channel@2 { |
| compatible = "fsl,mpc8610-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| cell-index = <2>; |
| reg = <0x100 0x80>; |
| interrupt-parent = <&mpic>; |
| interrupts = <22 2>; |
| }; |
| dma-channel@3 { |
| compatible = "fsl,mpc8610-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| cell-index = <3>; |
| reg = <0x180 0x80>; |
| interrupt-parent = <&mpic>; |
| interrupts = <23 2>; |
| }; |
| }; |
| |
| dma@c300 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma"; |
| cell-index = <1>; |
| reg = <0xc300 0x4>; /* DMA general status register */ |
| ranges = <0x0 0xc100 0x200>; |
| |
| dma-channel@0 { |
| compatible = "fsl,mpc8610-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| cell-index = <0>; |
| reg = <0x0 0x80>; |
| interrupt-parent = <&mpic>; |
| interrupts = <76 2>; |
| }; |
| dma-channel@1 { |
| compatible = "fsl,mpc8610-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| cell-index = <1>; |
| reg = <0x80 0x80>; |
| interrupt-parent = <&mpic>; |
| interrupts = <77 2>; |
| }; |
| dma-channel@2 { |
| compatible = "fsl,mpc8610-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| cell-index = <2>; |
| reg = <0x100 0x80>; |
| interrupt-parent = <&mpic>; |
| interrupts = <78 2>; |
| }; |
| dma-channel@3 { |
| compatible = "fsl,mpc8610-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| cell-index = <3>; |
| reg = <0x180 0x80>; |
| interrupt-parent = <&mpic>; |
| interrupts = <79 2>; |
| }; |
| }; |
| |
| }; |
| |
| pci0: pci@e0008000 { |
| compatible = "fsl,mpc8610-pci"; |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xe0008000 0x1000>; |
| bus-range = <0 0>; |
| ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000 |
| 0x01000000 0x0 0x00000000 0xe1000000 0x0 0x00100000>; |
| clock-frequency = <33333333>; |
| interrupt-parent = <&mpic>; |
| interrupts = <24 2>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x11 */ |
| 0x8800 0 0 1 &mpic 4 1 |
| 0x8800 0 0 2 &mpic 5 1 |
| 0x8800 0 0 3 &mpic 6 1 |
| 0x8800 0 0 4 &mpic 7 1 |
| |
| /* IDSEL 0x12 */ |
| 0x9000 0 0 1 &mpic 5 1 |
| 0x9000 0 0 2 &mpic 6 1 |
| 0x9000 0 0 3 &mpic 7 1 |
| 0x9000 0 0 4 &mpic 4 1 |
| >; |
| }; |
| |
| pci1: pcie@e000a000 { |
| compatible = "fsl,mpc8641-pcie"; |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xe000a000 0x1000>; |
| bus-range = <1 3>; |
| ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 |
| 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>; |
| clock-frequency = <33333333>; |
| interrupt-parent = <&mpic>; |
| interrupts = <26 2>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| |
| interrupt-map = < |
| /* IDSEL 0x1b */ |
| 0xd800 0 0 1 &mpic 2 1 |
| |
| /* IDSEL 0x1c*/ |
| 0xe000 0 0 1 &mpic 1 1 |
| 0xe000 0 0 2 &mpic 1 1 |
| 0xe000 0 0 3 &mpic 1 1 |
| 0xe000 0 0 4 &mpic 1 1 |
| |
| /* IDSEL 0x1f */ |
| 0xf800 0 0 1 &mpic 3 2 |
| 0xf800 0 0 2 &mpic 0 1 |
| >; |
| |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x02000000 0x0 0xa0000000 |
| 0x02000000 0x0 0xa0000000 |
| 0x0 0x10000000 |
| 0x01000000 0x0 0x00000000 |
| 0x01000000 0x0 0x00000000 |
| 0x0 0x00100000>; |
| uli1575@0 { |
| reg = <0 0 0 0 0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| ranges = <0x02000000 0x0 0xa0000000 |
| 0x02000000 0x0 0xa0000000 |
| 0x0 0x10000000 |
| 0x01000000 0x0 0x00000000 |
| 0x01000000 0x0 0x00000000 |
| 0x0 0x00100000>; |
| |
| isa@1e { |
| device_type = "isa"; |
| #size-cells = <1>; |
| #address-cells = <2>; |
| reg = <0xf000 0 0 0 0>; |
| ranges = <1 0 0x01000000 0 0 |
| 0x00001000>; |
| |
| rtc@70 { |
| compatible = "pnpPNP,b00"; |
| reg = <1 0x70 2>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| pci2: pcie@e0009000 { |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| device_type = "pci"; |
| compatible = "fsl,mpc8641-pcie"; |
| reg = <0xe0009000 0x00001000>; |
| ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 |
| 0x01000000 0 0x00000000 0xe2000000 0 0x00100000>; |
| bus-range = <0 255>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = <0x0000 0 0 1 &mpic 4 1 |
| 0x0000 0 0 2 &mpic 5 1 |
| 0x0000 0 0 3 &mpic 6 1 |
| 0x0000 0 0 4 &mpic 7 1>; |
| interrupt-parent = <&mpic>; |
| interrupts = <25 2>; |
| clock-frequency = <33333333>; |
| }; |
| }; |