V4L/DVB (7043): New card supported(partially): Pinnacle 800i
From Zhang: This patch continues the support for the Pinnacle HD 800i.
Patch committed as-is, cleanups to follow ... Steve
Signed-off-by: Chaogui Zhang <czhang1974@gmail.com>
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 82ac825..bc5593b 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -56,3 +56,4 @@
55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM [c180:c980]
56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [0070:9600,0070:9601,0070:9602]
57 -> ADS Tech Instant Video PCI [1421:0390]
+ 58 -> Pinnacle PCTV HD 800i [11bd:0051]
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index d484e5c..3ba3157 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1375,6 +1375,32 @@
.gpio0 = 0x07fa,
}},
},
+ [CX88_BOARD_PINNACLE_PCTV_HD_800i] = {
+ .name = "Pinnacle PCTV HD 800i",
+ .tuner_type = TUNER_XC5000,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x04fb,
+ .gpio1 = 0x10ff,
+ },{
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x04fb,
+ .gpio1 = 0x10ef,
+ .audioroute = 1,
+ },{
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0x04fb,
+ .gpio1 = 0x10ef,
+ .audioroute = 1,
+ }},
+ .mpeg = CX88_MPEG_DVB,
+ },
};
/* ------------------------------------------------------------------ */
@@ -1684,6 +1710,10 @@
.subvendor = 0x1421,
.subdevice = 0x0390,
.card = CX88_BOARD_ADSTECH_PTV_390,
+ },{
+ .subvendor = 0x11bd,
+ .subdevice = 0x0051,
+ .card = CX88_BOARD_PINNACLE_PCTV_HD_800i,
},
};
@@ -1851,6 +1881,39 @@
}
/* ----------------------------------------------------------------------- */
+/* Tuner callback function. Currently only needed for the Pinnacle *
+ * PCTV HD 800i with an xc5000 sillicon tuner. This is used for both *
+ * analog tuner attach (tuner-core.c) and dvb tuner attach (cx88-dvb.c) */
+
+int cx88_tuner_callback(void *i2c_algo, int command, int arg)
+{
+ struct i2c_algo_bit_data *algo = i2c_algo;
+ struct cx88_core *core = algo->data;
+
+ switch(core->boardnr) {
+ case CX88_BOARD_PINNACLE_PCTV_HD_800i:
+ if(command == 0) { /* This is the reset command from xc5000 */
+ /* Reset XC5000 tuner via GPIO pin #2 */
+ cx_set(MO_GP0_IO, 0x00000400);
+ cx_clear(MO_GP0_IO, 0x00000004);
+ mdelay(200);
+ cx_set(MO_GP0_IO, 0x00000004);
+ printk(KERN_ERR "xc5000: in reset for xc5000\n");
+ mdelay(200);
+ return 0;
+ }
+ else {
+ printk(KERN_ERR
+ "xc5000: unknown tuner callback command.\n");
+ return -EINVAL;
+ }
+ break;
+ }
+ return 0; /* Should never be here */
+}
+EXPORT_SYMBOL(cx88_tuner_callback);
+
+/* ----------------------------------------------------------------------- */
static void cx88_card_list(struct cx88_core *core, struct pci_dev *pci)
{
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index fce19ca..0246f97 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -40,6 +40,8 @@
#include "cx22702.h"
#include "or51132.h"
#include "lgdt330x.h"
+#include "s5h1409.h"
+#include "xc5000.h"
#include "nxt200x.h"
#include "cx24123.h"
#include "isl6421.h"
@@ -371,6 +373,22 @@
.lnb_polarity = 1,
};
+static struct s5h1409_config pinnacle_pctv_hd_800i_config = {
+ .demod_address = 0x32 >> 1,
+ .output_mode = S5H1409_PARALLEL_OUTPUT,
+ .gpio = S5H1409_GPIO_ON,
+ .qam_if = 44000,
+ .inversion = S5H1409_INVERSION_OFF,
+ .status_mode = S5H1409_DEMODLOCKING,
+};
+
+static struct xc5000_config pinnacle_pctv_hd_800i_tuner_config = {
+ .i2c_address = 0x64,
+ .if_khz = 5380,
+ /* cannot set .video_dev here, do it right before attach */
+ .tuner_callback = cx88_tuner_callback,
+};
+
static int dvb_register(struct cx8802_dev *dev)
{
/* init struct videobuf_dvb */
@@ -625,6 +643,24 @@
dev->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage;
}
break;
+ case CX88_BOARD_PINNACLE_PCTV_HD_800i:
+ /* Parallel mpeg data port and punctured clock mode */
+ dev->ts_gen_cntrl = 0x04;
+
+ dev->dvb.frontend = dvb_attach(s5h1409_attach,
+ &pinnacle_pctv_hd_800i_config,
+ &dev->core->i2c_adap);
+ if (dev->dvb.frontend != NULL) {
+ /* tuner_config.video_dev must point to
+ * i2c_adap.algo_data
+ */
+ pinnacle_pctv_hd_800i_tuner_config.video_dev =
+ dev->core->i2c_adap.algo_data;
+ dvb_attach(xc5000_attach, dev->dvb.frontend,
+ &dev->core->i2c_adap,
+ &pinnacle_pctv_hd_800i_tuner_config);
+ }
+ break;
default:
printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->core->name);
diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c
index 937497c..566b26a 100644
--- a/drivers/media/video/cx88/cx88-i2c.c
+++ b/drivers/media/video/cx88/cx88-i2c.c
@@ -109,20 +109,20 @@
if (core->board.radio_type != UNSET) {
if ((core->board.radio_addr==ADDR_UNSET)||(core->board.radio_addr==client->addr)) {
- tun_setup.mode_mask = T_RADIO;
- tun_setup.type = core->board.radio_type;
- tun_setup.addr = core->board.radio_addr;
-
+ tun_setup.mode_mask = T_RADIO;
+ tun_setup.type = core->board.radio_type;
+ tun_setup.addr = core->board.radio_addr;
+ tun_setup.tuner_callback = cx88_tuner_callback;
client->driver->command (client, TUNER_SET_TYPE_ADDR, &tun_setup);
}
}
if (core->board.tuner_type != UNSET) {
if ((core->board.tuner_addr==ADDR_UNSET)||(core->board.tuner_addr==client->addr)) {
- tun_setup.mode_mask = T_ANALOG_TV;
- tun_setup.type = core->board.tuner_type;
- tun_setup.addr = core->board.tuner_addr;
-
+ tun_setup.mode_mask = T_ANALOG_TV;
+ tun_setup.type = core->board.tuner_type;
+ tun_setup.addr = core->board.tuner_addr;
+ tun_setup.tuner_callback = cx88_tuner_callback;
client->driver->command (client,TUNER_SET_TYPE_ADDR, &tun_setup);
}
}
@@ -182,6 +182,7 @@
[ 0xa0 >> 1 ] = "eeprom",
[ 0xc0 >> 1 ] = "tuner (analog)",
[ 0xc2 >> 1 ] = "tuner (analog/dvb)",
+ [ 0xc8 >> 1 ] = "xc5000",
};
static void do_i2c_scan(char *name, struct i2c_client *c)
diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c
index 339a88a..a21b503 100644
--- a/drivers/media/video/cx88/cx88-mpeg.c
+++ b/drivers/media/video/cx88/cx88-mpeg.c
@@ -102,7 +102,7 @@
cx_write(TS_GEN_CNTRL, 0x0040 | dev->ts_gen_cntrl);
udelay(100);
cx_write(MO_PINMUX_IO, 0x00);
- cx_write(TS_HW_SOP_CNTRL,0x47<<16|188<<4|0x01);
+ cx_write(TS_HW_SOP_CNTRL, 0x47<<16|188<<4|0x01);
switch (core->boardnr) {
case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q:
case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T:
@@ -117,6 +117,11 @@
break;
case CX88_BOARD_HAUPPAUGE_HVR1300:
break;
+ case CX88_BOARD_PINNACLE_PCTV_HD_800i:
+ /* Enable MPEG parallel port */
+ cx_write(MO_PINMUX_IO, 0x80);
+ udelay(100);
+ break;
default:
cx_write(TS_SOP_STAT, 0x00);
break;
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index 0cd2946..4e823f2 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -210,6 +210,7 @@
#define CX88_BOARD_TE_DTV_250_OEM_SWANN 55
#define CX88_BOARD_HAUPPAUGE_HVR1300 56
#define CX88_BOARD_ADSTECH_PTV_390 57
+#define CX88_BOARD_PINNACLE_PCTV_HD_800i 58
enum cx88_itype {
CX88_VMUX_COMPOSITE1 = 1,
@@ -589,6 +590,7 @@
/* ----------------------------------------------------------- */
/* cx88-cards.c */
+extern int cx88_tuner_callback(void *dev, int command, int arg);
extern int cx88_get_resources(const struct cx88_core *core,
struct pci_dev *pci);
extern struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr);