| /* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c |
| * |
| * Copyright (c) 2004-2005,2008 Simtec Electronics |
| * http://armlinux.simtec.co.uk/ |
| * Ben Dooks <ben@simtec.co.uk> |
| * |
| * S3C2440/S3C2442 Common clock support |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/errno.h> |
| #include <linux/err.h> |
| #include <linux/device.h> |
| #include <linux/sysdev.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/mutex.h> |
| #include <linux/clk.h> |
| |
| #include <asm/hardware.h> |
| #include <asm/atomic.h> |
| #include <asm/irq.h> |
| #include <asm/io.h> |
| |
| #include <asm/arch/regs-clock.h> |
| |
| #include <asm/plat-s3c24xx/clock.h> |
| #include <asm/plat-s3c24xx/cpu.h> |
| |
| static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent) |
| { |
| unsigned long camdivn; |
| unsigned long dvs; |
| |
| if (parent == &clk_f) |
| dvs = 0; |
| else if (parent == &clk_h) |
| dvs = S3C2440_CAMDIVN_DVSEN; |
| else |
| return -EINVAL; |
| |
| clk->parent = parent; |
| |
| camdivn = __raw_readl(S3C2440_CAMDIVN); |
| camdivn &= ~S3C2440_CAMDIVN_DVSEN; |
| camdivn |= dvs; |
| __raw_writel(camdivn, S3C2440_CAMDIVN); |
| |
| return 0; |
| } |
| |
| static struct clk clk_arm = { |
| .name = "armclk", |
| .id = -1, |
| .set_parent = s3c2440_setparent_armclk, |
| }; |
| |
| static int s3c244x_clk_add(struct sys_device *sysdev) |
| { |
| unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); |
| unsigned long clkdivn; |
| struct clk *clock_upll; |
| int ret; |
| |
| printk("S3C244X: Clock Support, DVS %s\n", |
| (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); |
| |
| clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f; |
| |
| ret = s3c24xx_register_clock(&clk_arm); |
| if (ret < 0) { |
| printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret); |
| return ret; |
| } |
| |
| clock_upll = clk_get(NULL, "upll"); |
| if (IS_ERR(clock_upll)) { |
| printk(KERN_ERR "S3C244X: Failed to get upll clock\n"); |
| return -ENOENT; |
| } |
| |
| /* check rate of UPLL, and if it is near 96MHz, then change |
| * to using half the UPLL rate for the system */ |
| |
| if (clk_get_rate(clock_upll) > (94 * MHZ)) { |
| clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; |
| |
| mutex_lock(&clocks_mutex); |
| |
| clkdivn = __raw_readl(S3C2410_CLKDIVN); |
| clkdivn |= S3C2440_CLKDIVN_UCLK; |
| __raw_writel(clkdivn, S3C2410_CLKDIVN); |
| |
| mutex_unlock(&clocks_mutex); |
| } |
| |
| return 0; |
| } |
| |
| static struct sysdev_driver s3c2440_clk_driver = { |
| .add = s3c244x_clk_add, |
| }; |
| |
| static int s3c2440_clk_init(void) |
| { |
| return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver); |
| } |
| |
| arch_initcall(s3c2440_clk_init); |
| |
| static struct sysdev_driver s3c2442_clk_driver = { |
| .add = s3c244x_clk_add, |
| }; |
| |
| static int s3c2442_clk_init(void) |
| { |
| return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver); |
| } |
| |
| arch_initcall(s3c2442_clk_init); |