sm501: add uart support
This patch extends the sm501 mfd with 8250 uart support. We're currently
doing this in the board specific r2d-1 code already, but it would be nice to
do move things into the mfd since it's more chip specific than board specific.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 13bac53..6e655b4 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -22,6 +22,7 @@
#include <linux/sm501.h>
#include <linux/sm501-regs.h>
+#include <linux/serial_8250.h>
#include <asm/io.h>
@@ -723,13 +724,14 @@
*/
static struct platform_device *
-sm501_create_subdev(struct sm501_devdata *sm,
- char *name, unsigned int res_count)
+sm501_create_subdev(struct sm501_devdata *sm, char *name,
+ unsigned int res_count, unsigned int platform_data_size)
{
struct sm501_device *smdev;
smdev = kzalloc(sizeof(struct sm501_device) +
- sizeof(struct resource) * res_count, GFP_KERNEL);
+ (sizeof(struct resource) * res_count) +
+ platform_data_size, GFP_KERNEL);
if (!smdev)
return NULL;
@@ -737,11 +739,15 @@
smdev->pdev.name = name;
smdev->pdev.id = sm->pdev_id;
- smdev->pdev.resource = (struct resource *)(smdev+1);
- smdev->pdev.num_resources = res_count;
-
smdev->pdev.dev.parent = sm->dev;
+ if (res_count) {
+ smdev->pdev.resource = (struct resource *)(smdev+1);
+ smdev->pdev.num_resources = res_count;
+ }
+ if (platform_data_size)
+ smdev->pdev.dev.platform_data = (void *)(smdev+1);
+
return &smdev->pdev;
}
@@ -829,7 +835,7 @@
{
struct platform_device *pdev;
- pdev = sm501_create_subdev(sm, "sm501-usb", 3);
+ pdev = sm501_create_subdev(sm, "sm501-usb", 3, 0);
if (!pdev)
return -ENOMEM;
@@ -840,12 +846,55 @@
return sm501_register_device(sm, pdev);
}
+static void sm501_setup_uart_data(struct sm501_devdata *sm,
+ struct plat_serial8250_port *uart_data,
+ unsigned int offset)
+{
+ uart_data->membase = sm->regs + offset;
+ uart_data->mapbase = sm->io_res->start + offset;
+ uart_data->iotype = UPIO_MEM;
+ uart_data->irq = sm->irq;
+ uart_data->flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+ uart_data->regshift = 2;
+ uart_data->uartclk = (9600 * 16);
+}
+
+static int sm501_register_uart(struct sm501_devdata *sm, int devices)
+{
+ struct platform_device *pdev;
+ struct plat_serial8250_port *uart_data;
+
+ pdev = sm501_create_subdev(sm, "serial8250", 0,
+ sizeof(struct plat_serial8250_port) * 3);
+ if (!pdev)
+ return -ENOMEM;
+
+ uart_data = pdev->dev.platform_data;
+
+ if (devices & SM501_USE_UART0) {
+ sm501_setup_uart_data(sm, uart_data++, 0x30000);
+ sm501_unit_power(sm->dev, SM501_GATE_UART0, 1);
+ sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 12, 0);
+ sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x01e0, 0);
+ }
+ if (devices & SM501_USE_UART1) {
+ sm501_setup_uart_data(sm, uart_data++, 0x30020);
+ sm501_unit_power(sm->dev, SM501_GATE_UART1, 1);
+ sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 13, 0);
+ sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x1e00, 0);
+ }
+
+ pdev->id = PLAT8250_DEV_SM501;
+
+ return sm501_register_device(sm, pdev);
+}
+
static int sm501_register_display(struct sm501_devdata *sm,
resource_size_t *mem_avail)
{
struct platform_device *pdev;
- pdev = sm501_create_subdev(sm, "sm501-fb", 4);
+ pdev = sm501_create_subdev(sm, "sm501-fb", 4, 0);
if (!pdev)
return -ENOMEM;
@@ -963,6 +1012,7 @@
static int sm501_init_dev(struct sm501_devdata *sm)
{
+ struct sm501_initdata *idata;
resource_size_t mem_avail;
unsigned long dramctrl;
unsigned long devid;
@@ -980,6 +1030,9 @@
return -EINVAL;
}
+ /* disable irqs */
+ writel(0, sm->regs + SM501_IRQ_MASK);
+
dramctrl = readl(sm->regs + SM501_DRAM_CONTROL);
mem_avail = sm501_mem_local[(dramctrl >> 13) & 0x7];
@@ -998,15 +1051,14 @@
/* check to see if we have some device initialisation */
- if (sm->platdata) {
- struct sm501_platdata *pdata = sm->platdata;
+ idata = sm->platdata ? sm->platdata->init : NULL;
+ if (idata) {
+ sm501_init_regs(sm, idata);
- if (pdata->init) {
- sm501_init_regs(sm, sm->platdata->init);
-
- if (pdata->init->devices & SM501_USE_USB_HOST)
- sm501_register_usbhost(sm, &mem_avail);
- }
+ if (idata->devices & SM501_USE_USB_HOST)
+ sm501_register_usbhost(sm, &mem_avail);
+ if (idata->devices & (SM501_USE_UART0 | SM501_USE_UART1))
+ sm501_register_uart(sm, idata->devices);
}
ret = sm501_check_clocks(sm);
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 00b65c0..3d37c94 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -46,6 +46,7 @@
PLAT8250_DEV_HUB6,
PLAT8250_DEV_MCA,
PLAT8250_DEV_AU1X00,
+ PLAT8250_DEV_SM501,
};
/*