blob: a8e117f1382ef39323fc9369d27daf6cce5d9c59 [file] [log] [blame]
/* Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/i2c/sx150x.h>
#include <linux/i2c/isl9519.h>
#include <linux/gpio.h>
#include <linux/msm_ssbi.h>
#include <linux/regulator/msm-gpio-regulator.h>
#include <linux/mfd/pm8xxx/pm8921.h>
#include <linux/mfd/pm8xxx/pm8xxx-adc.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
#include <linux/slimbus/slimbus.h>
#include <linux/bootmem.h>
#ifdef CONFIG_ANDROID_PMEM
#include <linux/android_pmem.h>
#endif
#include <linux/dma-contiguous.h>
#include <linux/dma-mapping.h>
#include <linux/platform_data/qcom_crypto_device.h>
#include <linux/platform_data/qcom_wcnss_device.h>
#include <linux/leds.h>
#include <linux/leds-pm8xxx.h>
#include <linux/i2c/atmel_mxt_ts.h>
#include <linux/msm_tsens.h>
#include <linux/ks8851.h>
#include <linux/i2c/isa1200.h>
#include <linux/gpio_keys.h>
#include <linux/memory.h>
#include <linux/memblock.h>
#include <linux/msm_thermal.h>
#include <linux/slimbus/slimbus.h>
#include <linux/mfd/wcd9xxx/core.h>
#include <linux/mfd/wcd9xxx/pdata.h>
#ifdef CONFIG_STM_LIS3DH
#include <linux/input/lis3dh.h>
#endif
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/setup.h>
#include <asm/hardware/gic.h>
#include <asm/mach/mmc.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
#include <mach/msm_spi.h>
#ifdef CONFIG_USB_MSM_OTG_72K
#include <mach/msm_hsusb.h>
#else
#include <linux/usb/msm_hsusb.h>
#endif
#include <linux/usb/android.h>
#include <mach/usbdiag.h>
#include <mach/socinfo.h>
#include <mach/rpm.h>
#include <mach/gpiomux.h>
#include <mach/msm_bus_board.h>
#include <mach/msm_memtypes.h>
#include <mach/dma.h>
#include <mach/msm_xo.h>
#include <mach/restart.h>
#include <linux/msm_ion.h>
#include <mach/ion.h>
#include <mach/mdm2.h>
#include <mach/msm_rtb.h>
#include <linux/fmem.h>
#include <mach/msm_cache_dump.h>
#include <mach/kgsl.h>
#ifdef CONFIG_INPUT_MPU3050
#include <linux/input/mpu3050.h>
#endif
#include "timer.h"
#include "devices.h"
#include "devices-msm8x60.h"
#include "spm.h"
#include "pm.h"
#include <mach/cpuidle.h>
#include "rpm_resources.h"
#include <mach/mpm.h>
#include "clock.h"
#include "smd_private.h"
#include "pm-boot.h"
#include "msm_watchdog.h"
#include "board-8930.h"
#include "acpuclock-krait.h"
#include "platsmp.h"
static struct platform_device msm_fm_platform_init = {
.name = "iris_fm",
.id = -1,
};
#define KS8851_RST_GPIO 89
#define KS8851_IRQ_GPIO 90
#define HAP_SHIFT_LVL_OE_GPIO 47
#define MHL_GPIO_INT 72
#define MHL_GPIO_RESET 71
#define MHL_GPIO_PWR_EN 5
#if defined(CONFIG_GPIO_SX150X) || defined(CONFIG_GPIO_SX150X_MODULE)
struct sx150x_platform_data msm8930_sx150x_data[] = {
[SX150X_CAM] = {
.gpio_base = GPIO_CAM_EXPANDER_BASE,
.oscio_is_gpo = false,
.io_pullup_ena = 0x0,
.io_pulldn_ena = 0xc0,
.io_open_drain_ena = 0x0,
.irq_summary = -1,
},
};
#endif
#define MSM_PMEM_ADSP_SIZE 0x7800000
#define MSM_PMEM_AUDIO_SIZE 0x408000
#ifdef CONFIG_FB_MSM_HDMI_AS_PRIMARY
#define MSM_PMEM_SIZE 0x4000000 /* 64 Mbytes */
#else
#define MSM_PMEM_SIZE 0x2800000 /* 40 Mbytes */
#endif
#define MSM_LIQUID_PMEM_SIZE 0x4000000 /* 64 Mbytes */
#ifdef CONFIG_MSM_MULTIMEDIA_USE_ION
#define HOLE_SIZE 0x20000
#define MSM_CONTIG_MEM_SIZE 0x65000
#ifdef CONFIG_MSM_IOMMU
#define MSM_ION_MM_SIZE 0x3800000 /* Need to be multiple of 64K */
#define MSM_ION_SF_SIZE 0x0
#define MSM_ION_QSECOM_SIZE 0x780000 /* (7.5MB) */
#define MSM_ION_HEAP_NUM 7
#else
#define MSM_ION_SF_SIZE MSM_PMEM_SIZE
#define MSM_ION_MM_SIZE MSM_PMEM_ADSP_SIZE
#define MSM_ION_QSECOM_SIZE 0x600000 /* (6MB) */
#define MSM_ION_HEAP_NUM 8
#endif
#define MSM_ION_MM_FW_SIZE (0x200000 - HOLE_SIZE) /* 2MB - 128Kb */
#define MSM_ION_MFC_SIZE SZ_8K
#define MSM_ION_AUDIO_SIZE MSM_PMEM_AUDIO_SIZE
#define MSM_LIQUID_ION_MM_SIZE (MSM_ION_MM_SIZE + 0x600000)
#define MSM_LIQUID_ION_SF_SIZE MSM_LIQUID_PMEM_SIZE
#define MSM_HDMI_PRIM_ION_SF_SIZE MSM_HDMI_PRIM_PMEM_SIZE
#define MSM_MM_FW_SIZE (0x200000 - HOLE_SIZE) /*2MB -128Kb */
#define MSM8930_FIXED_AREA_START (0xa0000000 - (MSM_ION_MM_FW_SIZE + \
HOLE_SIZE))
#define MAX_FIXED_AREA_SIZE 0x10000000
#define MSM8930_FW_START MSM8930_FIXED_AREA_START
#else
#define MSM_CONTIG_MEM_SIZE 0x110C000
#define MSM_ION_HEAP_NUM 1
#endif
#ifdef CONFIG_KERNEL_MSM_CONTIG_MEM_REGION
static unsigned msm_contig_mem_size = MSM_CONTIG_MEM_SIZE;
static int __init msm_contig_mem_size_setup(char *p)
{
msm_contig_mem_size = memparse(p, NULL);
return 0;
}
early_param("msm_contig_mem_size", msm_contig_mem_size_setup);
#endif
#ifdef CONFIG_ANDROID_PMEM
static unsigned pmem_size = MSM_PMEM_SIZE;
static int __init pmem_size_setup(char *p)
{
pmem_size = memparse(p, NULL);
return 0;
}
early_param("pmem_size", pmem_size_setup);
static unsigned pmem_adsp_size = MSM_PMEM_ADSP_SIZE;
static int __init pmem_adsp_size_setup(char *p)
{
pmem_adsp_size = memparse(p, NULL);
return 0;
}
early_param("pmem_adsp_size", pmem_adsp_size_setup);
static unsigned pmem_audio_size = MSM_PMEM_AUDIO_SIZE;
static int __init pmem_audio_size_setup(char *p)
{
pmem_audio_size = memparse(p, NULL);
return 0;
}
early_param("pmem_audio_size", pmem_audio_size_setup);
#endif
#ifdef CONFIG_ANDROID_PMEM
#ifndef CONFIG_MSM_MULTIMEDIA_USE_ION
static struct android_pmem_platform_data android_pmem_pdata = {
.name = "pmem",
.allocator_type = PMEM_ALLOCATORTYPE_ALLORNOTHING,
.cached = 1,
.memory_type = MEMTYPE_EBI1,
};
static struct platform_device msm8930_android_pmem_device = {
.name = "android_pmem",
.id = 0,
.dev = {.platform_data = &android_pmem_pdata},
};
static struct android_pmem_platform_data android_pmem_adsp_pdata = {
.name = "pmem_adsp",
.allocator_type = PMEM_ALLOCATORTYPE_BITMAP,
.cached = 0,
.memory_type = MEMTYPE_EBI1,
};
static struct platform_device msm8930_android_pmem_adsp_device = {
.name = "android_pmem",
.id = 2,
.dev = { .platform_data = &android_pmem_adsp_pdata },
};
static struct android_pmem_platform_data android_pmem_audio_pdata = {
.name = "pmem_audio",
.allocator_type = PMEM_ALLOCATORTYPE_BITMAP,
.cached = 0,
.memory_type = MEMTYPE_EBI1,
};
static struct platform_device msm8930_android_pmem_audio_device = {
.name = "android_pmem",
.id = 4,
.dev = { .platform_data = &android_pmem_audio_pdata },
};
#endif /* CONFIG_MSM_MULTIMEDIA_USE_ION */
#endif /* CONFIG_ANDROID_PMEM */
struct fmem_platform_data msm8930_fmem_pdata = {
};
#define DSP_RAM_BASE_8960 0x8da00000
#define DSP_RAM_SIZE_8960 0x1800000
static int dspcrashd_pdata_8960 = 0xDEADDEAD;
static struct resource resources_dspcrashd_8960[] = {
{
.name = "msm_dspcrashd",
.start = DSP_RAM_BASE_8960,
.end = DSP_RAM_BASE_8960 + DSP_RAM_SIZE_8960,
.flags = IORESOURCE_DMA,
},
};
static struct platform_device msm_device_dspcrashd_8960 = {
.name = "msm_dspcrashd",
.num_resources = ARRAY_SIZE(resources_dspcrashd_8960),
.resource = resources_dspcrashd_8960,
.dev = { .platform_data = &dspcrashd_pdata_8960 },
};
static struct memtype_reserve msm8930_reserve_table[] __initdata = {
[MEMTYPE_SMI] = {
},
[MEMTYPE_EBI0] = {
.flags = MEMTYPE_FLAGS_1M_ALIGN,
},
[MEMTYPE_EBI1] = {
.flags = MEMTYPE_FLAGS_1M_ALIGN,
},
};
static void __init reserve_rtb_memory(void)
{
#if defined(CONFIG_MSM_RTB)
msm8930_reserve_table[MEMTYPE_EBI1].size += msm8930_rtb_pdata.size;
#endif
}
static void __init size_pmem_devices(void)
{
#ifdef CONFIG_ANDROID_PMEM
#ifndef CONFIG_MSM_MULTIMEDIA_USE_ION
android_pmem_adsp_pdata.size = pmem_adsp_size;
android_pmem_pdata.size = pmem_size;
android_pmem_audio_pdata.size = MSM_PMEM_AUDIO_SIZE;
#endif /*CONFIG_MSM_MULTIMEDIA_USE_ION*/
#endif /*CONFIG_ANDROID_PMEM*/
}
#ifdef CONFIG_ANDROID_PMEM
#ifndef CONFIG_MSM_MULTIMEDIA_USE_ION
static void __init reserve_memory_for(struct android_pmem_platform_data *p)
{
msm8930_reserve_table[p->memory_type].size += p->size;
}
#endif /*CONFIG_MSM_MULTIMEDIA_USE_ION*/
#endif /*CONFIG_ANDROID_PMEM*/
static void __init reserve_pmem_memory(void)
{
#ifdef CONFIG_ANDROID_PMEM
#ifndef CONFIG_MSM_MULTIMEDIA_USE_ION
reserve_memory_for(&android_pmem_adsp_pdata);
reserve_memory_for(&android_pmem_pdata);
reserve_memory_for(&android_pmem_audio_pdata);
#endif /*CONFIG_MSM_MULTIMEDIA_USE_ION*/
msm8930_reserve_table[MEMTYPE_EBI1].size += msm_contig_mem_size;
#endif /*CONFIG_ANDROID_PMEM*/
}
static int msm8930_paddr_to_memtype(unsigned int paddr)
{
return MEMTYPE_EBI1;
}
#define FMEM_ENABLED 0
#ifdef CONFIG_ION_MSM
#ifdef CONFIG_MSM_MULTIMEDIA_USE_ION
static struct ion_cp_heap_pdata cp_mm_msm8930_ion_pdata = {
.permission_type = IPT_TYPE_MM_CARVEOUT,
.align = PAGE_SIZE,
.reusable = FMEM_ENABLED,
.mem_is_fmem = FMEM_ENABLED,
.fixed_position = FIXED_MIDDLE,
};
static struct ion_cp_heap_pdata cp_mfc_msm8930_ion_pdata = {
.permission_type = IPT_TYPE_MFC_SHAREDMEM,
.align = PAGE_SIZE,
.reusable = 0,
.mem_is_fmem = FMEM_ENABLED,
.fixed_position = FIXED_HIGH,
};
static struct ion_co_heap_pdata co_msm8930_ion_pdata = {
.adjacent_mem_id = INVALID_HEAP_ID,
.align = PAGE_SIZE,
.mem_is_fmem = 0,
};
static struct ion_co_heap_pdata fw_co_msm8930_ion_pdata = {
.adjacent_mem_id = ION_CP_MM_HEAP_ID,
.align = SZ_128K,
.mem_is_fmem = FMEM_ENABLED,
.fixed_position = FIXED_LOW,
};
#endif
static u64 msm_dmamask = DMA_BIT_MASK(32);
static struct platform_device ion_mm_heap_device = {
.name = "ion-mm-heap-device",
.id = -1,
.dev = {
.dma_mask = &msm_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
}
};
/**
* These heaps are listed in the order they will be allocated. Due to
* video hardware restrictions and content protection the FW heap has to
* be allocated adjacent (below) the MM heap and the MFC heap has to be
* allocated after the MM heap to ensure MFC heap is not more than 256MB
* away from the base address of the FW heap.
* However, the order of FW heap and MM heap doesn't matter since these
* two heaps are taken care of by separate code to ensure they are adjacent
* to each other.
* Don't swap the order unless you know what you are doing!
*/
struct ion_platform_heap msm8930_heaps[] = {
{
.id = ION_SYSTEM_HEAP_ID,
.type = ION_HEAP_TYPE_SYSTEM,
.name = ION_VMALLOC_HEAP_NAME,
},
#ifdef CONFIG_MSM_MULTIMEDIA_USE_ION
{
.id = ION_CP_MM_HEAP_ID,
.type = ION_HEAP_TYPE_CP,
.name = ION_MM_HEAP_NAME,
.size = MSM_ION_MM_SIZE,
.memory_type = ION_EBI_TYPE,
.extra_data = (void *) &cp_mm_msm8930_ion_pdata,
.priv = &ion_mm_heap_device.dev
},
{
.id = ION_MM_FIRMWARE_HEAP_ID,
.type = ION_HEAP_TYPE_CARVEOUT,
.name = ION_MM_FIRMWARE_HEAP_NAME,
.size = MSM_ION_MM_FW_SIZE,
.memory_type = ION_EBI_TYPE,
.extra_data = (void *) &fw_co_msm8930_ion_pdata,
},
{
.id = ION_CP_MFC_HEAP_ID,
.type = ION_HEAP_TYPE_CP,
.name = ION_MFC_HEAP_NAME,
.size = MSM_ION_MFC_SIZE,
.memory_type = ION_EBI_TYPE,
.extra_data = (void *) &cp_mfc_msm8930_ion_pdata,
},
#ifndef CONFIG_MSM_IOMMU
{
.id = ION_SF_HEAP_ID,
.type = ION_HEAP_TYPE_CARVEOUT,
.name = ION_SF_HEAP_NAME,
.size = MSM_ION_SF_SIZE,
.memory_type = ION_EBI_TYPE,
.extra_data = (void *) &co_msm8930_ion_pdata,
},
#endif
{
.id = ION_IOMMU_HEAP_ID,
.type = ION_HEAP_TYPE_IOMMU,
.name = ION_IOMMU_HEAP_NAME,
},
{
.id = ION_QSECOM_HEAP_ID,
.type = ION_HEAP_TYPE_CARVEOUT,
.name = ION_QSECOM_HEAP_NAME,
.size = MSM_ION_QSECOM_SIZE,
.memory_type = ION_EBI_TYPE,
.extra_data = (void *) &co_msm8930_ion_pdata,
},
{
.id = ION_AUDIO_HEAP_ID,
.type = ION_HEAP_TYPE_CARVEOUT,
.name = ION_AUDIO_HEAP_NAME,
.size = MSM_ION_AUDIO_SIZE,
.memory_type = ION_EBI_TYPE,
.extra_data = (void *) &co_msm8930_ion_pdata,
},
#endif
};
static struct ion_platform_data msm8930_ion_pdata = {
.nr = MSM_ION_HEAP_NUM,
.heaps = msm8930_heaps,
};
static struct platform_device msm8930_ion_dev = {
.name = "ion-msm",
.id = 1,
.dev = { .platform_data = &msm8930_ion_pdata },
};
#endif
struct platform_device msm8930_fmem_device = {
.name = "fmem",
.id = 1,
.dev = { .platform_data = &msm8930_fmem_pdata },
};
static void __init reserve_mem_for_ion(enum ion_memory_types mem_type,
unsigned long size)
{
msm8930_reserve_table[mem_type].size += size;
}
static void __init msm8930_reserve_fixed_area(unsigned long fixed_area_size)
{
#if defined(CONFIG_ION_MSM) && defined(CONFIG_MSM_MULTIMEDIA_USE_ION)
int ret;
if (fixed_area_size > MAX_FIXED_AREA_SIZE)
panic("fixed area size is larger than %dM\n",
MAX_FIXED_AREA_SIZE >> 20);
reserve_info->fixed_area_size = fixed_area_size;
reserve_info->fixed_area_start = MSM8930_FW_START;
ret = memblock_remove(reserve_info->fixed_area_start,
reserve_info->fixed_area_size);
BUG_ON(ret);
#endif
}
/**
* Reserve memory for ION and calculate amount of reusable memory for fmem.
* We only reserve memory for heaps that are not reusable. However, we only
* support one reusable heap at the moment so we ignore the reusable flag for
* other than the first heap with reusable flag set. Also handle special case
* for video heaps (MM,FW, and MFC). Video requires heaps MM and MFC to be
* at a higher address than FW in addition to not more than 256MB away from the
* base address of the firmware. This means that if MM is reusable the other
* two heaps must be allocated in the same region as FW. This is handled by the
* mem_is_fmem flag in the platform data. In addition the MM heap must be
* adjacent to the FW heap for content protection purposes.
*/
static void __init reserve_ion_memory(void)
{
#if defined(CONFIG_ION_MSM) && defined(CONFIG_MSM_MULTIMEDIA_USE_ION)
unsigned int i;
int ret;
unsigned int fixed_size = 0;
unsigned int fixed_low_size, fixed_middle_size, fixed_high_size;
unsigned long fixed_low_start, fixed_middle_start, fixed_high_start;
unsigned long cma_alignment;
unsigned int low_use_cma = 0;
unsigned int middle_use_cma = 0;
unsigned int high_use_cma = 0;
fixed_low_size = 0;
fixed_middle_size = 0;
fixed_high_size = 0;
cma_alignment = PAGE_SIZE << max(MAX_ORDER, pageblock_order);
for (i = 0; i < msm8930_ion_pdata.nr; ++i) {
struct ion_platform_heap *heap =
&(msm8930_ion_pdata.heaps[i]);
int use_cma = 0;
if (heap->extra_data) {
int fixed_position = NOT_FIXED;
switch ((int) heap->type) {
case ION_HEAP_TYPE_CP:
if (((struct ion_cp_heap_pdata *)
heap->extra_data)->is_cma) {
heap->size = ALIGN(heap->size,
cma_alignment);
use_cma = 1;
}
fixed_position = ((struct ion_cp_heap_pdata *)
heap->extra_data)->fixed_position;
break;
case ION_HEAP_TYPE_DMA:
use_cma = 1;
/* Purposely fall through here */
case ION_HEAP_TYPE_CARVEOUT:
fixed_position = ((struct ion_co_heap_pdata *)
heap->extra_data)->fixed_position;
break;
default:
break;
}
if (fixed_position != NOT_FIXED)
fixed_size += heap->size;
else
reserve_mem_for_ion(MEMTYPE_EBI1, heap->size);
if (fixed_position == FIXED_LOW) {
fixed_low_size += heap->size;
low_use_cma = use_cma;
} else if (fixed_position == FIXED_MIDDLE) {
fixed_middle_size += heap->size;
middle_use_cma = use_cma;
} else if (fixed_position == FIXED_HIGH) {
fixed_high_size += heap->size;
high_use_cma = use_cma;
} else if (use_cma) {
/*
* Heaps that use CMA but are not part of the
* fixed set. Create wherever.
*/
dma_declare_contiguous(
heap->priv,
heap->size,
0,
0xb0000000);
}
}
}
if (!fixed_size)
return;
/*
* Given the setup for the fixed area, we can't round up all sizes.
* Some sizes must be set up exactly and aligned correctly. Incorrect
* alignments are considered a configuration issue
*/
fixed_low_start = MSM8930_FIXED_AREA_START;
if (low_use_cma) {
BUG_ON(!IS_ALIGNED(fixed_low_size + HOLE_SIZE, cma_alignment));
BUG_ON(!IS_ALIGNED(fixed_low_start, cma_alignment));
} else {
BUG_ON(!IS_ALIGNED(fixed_low_size + HOLE_SIZE, SECTION_SIZE));
ret = memblock_remove(fixed_low_start,
fixed_low_size + HOLE_SIZE);
BUG_ON(ret);
}
fixed_middle_start = fixed_low_start + fixed_low_size + HOLE_SIZE;
if (middle_use_cma) {
BUG_ON(!IS_ALIGNED(fixed_middle_start, cma_alignment));
BUG_ON(!IS_ALIGNED(fixed_middle_size, cma_alignment));
} else {
BUG_ON(!IS_ALIGNED(fixed_middle_size, SECTION_SIZE));
ret = memblock_remove(fixed_middle_start, fixed_middle_size);
BUG_ON(ret);
}
fixed_high_start = fixed_middle_start + fixed_middle_size;
if (high_use_cma) {
fixed_high_size = ALIGN(fixed_high_size, cma_alignment);
BUG_ON(!IS_ALIGNED(fixed_high_start, cma_alignment));
} else {
/* This is the end of the fixed area so it's okay to round up */
fixed_high_size = ALIGN(fixed_high_size, SECTION_SIZE);
ret = memblock_remove(fixed_high_start, fixed_high_size);
BUG_ON(ret);
}
for (i = 0; i < msm8930_ion_pdata.nr; ++i) {
struct ion_platform_heap *heap = &(msm8930_ion_pdata.heaps[i]);
if (heap->extra_data) {
int fixed_position = NOT_FIXED;
struct ion_cp_heap_pdata *pdata = NULL;
switch ((int) heap->type) {
case ION_HEAP_TYPE_CP:
pdata =
(struct ion_cp_heap_pdata *)heap->extra_data;
fixed_position = pdata->fixed_position;
break;
case ION_HEAP_TYPE_DMA:
case ION_HEAP_TYPE_CARVEOUT:
fixed_position = ((struct ion_co_heap_pdata *)
heap->extra_data)->fixed_position;
break;
default:
break;
}
switch (fixed_position) {
case FIXED_LOW:
heap->base = fixed_low_start;
break;
case FIXED_MIDDLE:
heap->base = fixed_middle_start;
if (middle_use_cma)
dma_declare_contiguous(
&ion_mm_heap_device.dev,
heap->size,
fixed_middle_start,
0xa0000000);
pdata->secure_base = fixed_middle_start
- HOLE_SIZE;
pdata->secure_size = HOLE_SIZE + heap->size;
break;
case FIXED_HIGH:
heap->base = fixed_high_start;
break;
default:
break;
}
}
}
#endif
}
static void __init reserve_mdp_memory(void)
{
msm8930_mdp_writeback(msm8930_reserve_table);
}
#ifdef CONFIG_MSM_CACHE_DUMP
static void __init reserve_cache_dump_memory(void)
{
unsigned int total;
total = msm8930_cache_dump_pdata.l1_size +
msm8930_cache_dump_pdata.l2_size;
msm8930_reserve_table[MEMTYPE_EBI1].size += total;
}
#else
static void __init reserve_cache_dump_memory(void) { }
#endif
static void __init msm8930_calculate_reserve_sizes(void)
{
size_pmem_devices();
reserve_pmem_memory();
reserve_ion_memory();
reserve_mdp_memory();
reserve_rtb_memory();
reserve_cache_dump_memory();
}
static struct reserve_info msm8930_reserve_info __initdata = {
.memtype_reserve_table = msm8930_reserve_table,
.calculate_reserve_sizes = msm8930_calculate_reserve_sizes,
.reserve_fixed_area = msm8930_reserve_fixed_area,
.paddr_to_memtype = msm8930_paddr_to_memtype,
};
static int msm8930_memory_bank_size(void)
{
return 1<<29;
}
static void __init locate_unstable_memory(void)
{
struct membank *mb = &meminfo.bank[meminfo.nr_banks - 1];
unsigned long bank_size;
unsigned long low, high;
bank_size = msm8930_memory_bank_size();
low = meminfo.bank[0].start;
high = mb->start + mb->size;
/* Check if 32 bit overflow occured */
if (high < mb->start)
high -= PAGE_SIZE;
if (high < MAX_FIXED_AREA_SIZE + MSM8930_FIXED_AREA_START)
panic("fixed area extends beyond end of memory\n");
low &= ~(bank_size - 1);
if (high - low <= bank_size)
goto no_dmm;
msm8930_reserve_info.bank_size = bank_size;
#ifdef CONFIG_ENABLE_DMM
msm8930_reserve_info.low_unstable_address = mb->start -
MIN_MEMORY_BLOCK_SIZE + mb->size;
msm8930_reserve_info.max_unstable_size = MIN_MEMORY_BLOCK_SIZE;
pr_info("low unstable address %lx max size %lx bank size %lx\n",
msm8930_reserve_info.low_unstable_address,
msm8930_reserve_info.max_unstable_size,
msm8930_reserve_info.bank_size);
return;
#endif
no_dmm:
msm8930_reserve_info.low_unstable_address = high;
msm8930_reserve_info.max_unstable_size = 0;
}
static void __init place_movable_zone(void)
{
#ifdef CONFIG_ENABLE_DMM
movable_reserved_start = msm8930_reserve_info.low_unstable_address;
movable_reserved_size = msm8930_reserve_info.max_unstable_size;
pr_info("movable zone start %lx size %lx\n",
movable_reserved_start, movable_reserved_size);
#endif
}
static void __init msm8930_early_memory(void)
{
reserve_info = &msm8930_reserve_info;
locate_unstable_memory();
place_movable_zone();
}
static char prim_panel_name[PANEL_NAME_MAX_LEN];
static char ext_panel_name[PANEL_NAME_MAX_LEN];
static int __init prim_display_setup(char *param)
{
if (strnlen(param, PANEL_NAME_MAX_LEN))
strlcpy(prim_panel_name, param, PANEL_NAME_MAX_LEN);
return 0;
}
early_param("prim_display", prim_display_setup);
static int __init ext_display_setup(char *param)
{
if (strnlen(param, PANEL_NAME_MAX_LEN))
strlcpy(ext_panel_name, param, PANEL_NAME_MAX_LEN);
return 0;
}
early_param("ext_display", ext_display_setup);
static void __init msm8930_reserve(void)
{
msm8930_set_display_params(prim_panel_name, ext_panel_name);
msm_reserve();
}
static int msm8930_change_memory_power(u64 start, u64 size,
int change_type)
{
return soc_change_memory_power(start, size, change_type);
}
static void __init msm8930_allocate_memory_regions(void)
{
msm8930_allocate_fb_region();
}
#ifdef CONFIG_WCD9304_CODEC
#define SITAR_INTERRUPT_BASE (NR_MSM_IRQS + NR_GPIO_IRQS + NR_PM8921_IRQS)
/* Micbias setting is based on 8660 CDP/MTP/FLUID requirement
* 4 micbiases are used to power various analog and digital
* microphones operating at 1800 mV. Technically, all micbiases
* can source from single cfilter since all microphones operate
* at the same voltage level. The arrangement below is to make
* sure all cfilters are exercised. LDO_H regulator ouput level
* does not need to be as high as 2.85V. It is choosen for
* microphone sensitivity purpose.
*/
static struct wcd9xxx_pdata sitar_platform_data = {
.slimbus_slave_device = {
.name = "sitar-slave",
.e_addr = {0, 0, 0x00, 0, 0x17, 2},
},
.irq = MSM_GPIO_TO_INT(62),
.irq_base = SITAR_INTERRUPT_BASE,
.num_irqs = NR_WCD9XXX_IRQS,
.reset_gpio = 42,
.micbias = {
.ldoh_v = SITAR_LDOH_2P85_V,
.cfilt1_mv = 1800,
.cfilt2_mv = 1800,
.bias1_cfilt_sel = SITAR_CFILT1_SEL,
.bias2_cfilt_sel = SITAR_CFILT2_SEL,
.bias1_cap_mode = MICBIAS_EXT_BYP_CAP,
.bias2_cap_mode = MICBIAS_NO_EXT_BYP_CAP,
},
.regulator = {
{
.name = "CDC_VDD_CP",
.min_uV = 2200000,
.max_uV = 2200000,
.optimum_uA = WCD9XXX_CDC_VDDA_CP_CUR_MAX,
},
{
.name = "CDC_VDDA_RX",
.min_uV = 1800000,
.max_uV = 1800000,
.optimum_uA = WCD9XXX_CDC_VDDA_RX_CUR_MAX,
},
{
.name = "CDC_VDDA_TX",
.min_uV = 1800000,
.max_uV = 1800000,
.optimum_uA = WCD9XXX_CDC_VDDA_TX_CUR_MAX,
},
{
.name = "VDDIO_CDC",
.min_uV = 1800000,
.max_uV = 1800000,
.optimum_uA = WCD9XXX_VDDIO_CDC_CUR_MAX,
},
{
.name = "VDDD_CDC_D",
.min_uV = 1200000,
.max_uV = 1250000,
.optimum_uA = WCD9XXX_VDDD_CDC_D_CUR_MAX,
},
{
.name = "CDC_VDDA_A_1P2V",
.min_uV = 1200000,
.max_uV = 1250000,
.optimum_uA = WCD9XXX_VDDD_CDC_A_CUR_MAX,
},
},
};
static struct slim_device msm_slim_sitar = {
.name = "sitar-slim",
.e_addr = {0, 1, 0x00, 0, 0x17, 2},
.dev = {
.platform_data = &sitar_platform_data,
},
};
static struct wcd9xxx_pdata sitar1p1_platform_data = {
.slimbus_slave_device = {
.name = "sitar-slave",
.e_addr = {0, 0, 0x70, 0, 0x17, 2},
},
.irq = MSM_GPIO_TO_INT(62),
.irq_base = SITAR_INTERRUPT_BASE,
.num_irqs = NR_WCD9XXX_IRQS,
.reset_gpio = 42,
.micbias = {
.ldoh_v = SITAR_LDOH_2P85_V,
.cfilt1_mv = 1800,
.cfilt2_mv = 1800,
.bias1_cfilt_sel = SITAR_CFILT1_SEL,
.bias2_cfilt_sel = SITAR_CFILT2_SEL,
.bias1_cap_mode = MICBIAS_EXT_BYP_CAP,
.bias2_cap_mode = MICBIAS_NO_EXT_BYP_CAP,
},
.regulator = {
{
.name = "CDC_VDD_CP",
.min_uV = 2200000,
.max_uV = 2200000,
.optimum_uA = WCD9XXX_CDC_VDDA_CP_CUR_MAX,
},
{
.name = "CDC_VDDA_RX",
.min_uV = 1800000,
.max_uV = 1800000,
.optimum_uA = WCD9XXX_CDC_VDDA_RX_CUR_MAX,
},
{
.name = "CDC_VDDA_TX",
.min_uV = 1800000,
.max_uV = 1800000,
.optimum_uA = WCD9XXX_CDC_VDDA_TX_CUR_MAX,
},
{
.name = "VDDIO_CDC",
.min_uV = 1800000,
.max_uV = 1800000,
.optimum_uA = WCD9XXX_VDDIO_CDC_CUR_MAX,
},
{
.name = "VDDD_CDC_D",
.min_uV = 1200000,
.max_uV = 1250000,
.optimum_uA = WCD9XXX_VDDD_CDC_D_CUR_MAX,
},
{
.name = "CDC_VDDA_A_1P2V",
.min_uV = 1200000,
.max_uV = 1250000,
.optimum_uA = WCD9XXX_VDDD_CDC_A_CUR_MAX,
},
},
};
static struct slim_device msm_slim_sitar1p1 = {
.name = "sitar1p1-slim",
.e_addr = {0, 1, 0x70, 0, 0x17, 2},
.dev = {
.platform_data = &sitar1p1_platform_data,
},
};
#endif
static struct slim_boardinfo msm_slim_devices[] = {
#ifdef CONFIG_WCD9304_CODEC
{
.bus_num = 1,
.slim_slave = &msm_slim_sitar,
},
{
.bus_num = 1,
.slim_slave = &msm_slim_sitar1p1,
},
#endif
/* add more slimbus slaves as needed */
};
#define MSM_WCNSS_PHYS 0x03000000
#define MSM_WCNSS_SIZE 0x280000
static struct resource resources_wcnss_wlan[] = {
{
.start = RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ,
.end = RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ,
.name = "wcnss_wlanrx_irq",
.flags = IORESOURCE_IRQ,
},
{
.start = RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ,
.end = RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ,
.name = "wcnss_wlantx_irq",
.flags = IORESOURCE_IRQ,
},
{
.start = MSM_WCNSS_PHYS,
.end = MSM_WCNSS_PHYS + MSM_WCNSS_SIZE - 1,
.name = "wcnss_mmio",
.flags = IORESOURCE_MEM,
},
{
.start = 84,
.end = 88,
.name = "wcnss_gpios_5wire",
.flags = IORESOURCE_IO,
},
};
static struct qcom_wcnss_opts qcom_wcnss_pdata = {
.has_48mhz_xo = 1,
};
static struct platform_device msm_device_wcnss_wlan = {
.name = "wcnss_wlan",
.id = 0,
.num_resources = ARRAY_SIZE(resources_wcnss_wlan),
.resource = resources_wcnss_wlan,
.dev = {.platform_data = &qcom_wcnss_pdata},
};
#ifdef CONFIG_QSEECOM
/* qseecom bus scaling */
static struct msm_bus_vectors qseecom_clks_init_vectors[] = {
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_EBI_CH0,
.ib = 0,
.ab = 0,
},
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_SPS,
.ib = 0,
.ab = 0,
},
{
.src = MSM_BUS_MASTER_SPDM,
.dst = MSM_BUS_SLAVE_SPDM,
.ib = 0,
.ab = 0,
},
};
static struct msm_bus_vectors qseecom_enable_dfab_vectors[] = {
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_EBI_CH0,
.ib = (492 * 8) * 1000000UL,
.ab = (492 * 8) * 100000UL,
},
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_SPS,
.ib = (492 * 8) * 1000000UL,
.ab = (492 * 8) * 100000UL,
},
{
.src = MSM_BUS_MASTER_SPDM,
.dst = MSM_BUS_SLAVE_SPDM,
.ib = 0,
.ab = 0,
},
};
static struct msm_bus_vectors qseecom_enable_sfpb_vectors[] = {
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_EBI_CH0,
.ib = 0,
.ab = 0,
},
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_SPS,
.ib = 0,
.ab = 0,
},
{
.src = MSM_BUS_MASTER_SPDM,
.dst = MSM_BUS_SLAVE_SPDM,
.ib = (64 * 8) * 1000000UL,
.ab = (64 * 8) * 100000UL,
},
};
static struct msm_bus_vectors qseecom_enable_dfab_sfpb_vectors[] = {
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_EBI_CH0,
.ib = (492 * 8) * 1000000UL,
.ab = (492 * 8) * 100000UL,
},
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_SPS,
.ib = (492 * 8) * 1000000UL,
.ab = (492 * 8) * 100000UL,
},
{
.src = MSM_BUS_MASTER_SPDM,
.dst = MSM_BUS_SLAVE_SPDM,
.ib = (64 * 8) * 1000000UL,
.ab = (64 * 8) * 100000UL,
},
};
static struct msm_bus_paths qseecom_hw_bus_scale_usecases[] = {
{
ARRAY_SIZE(qseecom_clks_init_vectors),
qseecom_clks_init_vectors,
},
{
ARRAY_SIZE(qseecom_enable_dfab_vectors),
qseecom_enable_sfpb_vectors,
},
{
ARRAY_SIZE(qseecom_enable_sfpb_vectors),
qseecom_enable_sfpb_vectors,
},
{
ARRAY_SIZE(qseecom_enable_dfab_sfpb_vectors),
qseecom_enable_dfab_sfpb_vectors,
},
};
static struct msm_bus_scale_pdata qseecom_bus_pdata = {
qseecom_hw_bus_scale_usecases,
ARRAY_SIZE(qseecom_hw_bus_scale_usecases),
.name = "qsee",
};
static struct platform_device qseecom_device = {
.name = "qseecom",
.id = 0,
.dev = {
.platform_data = &qseecom_bus_pdata,
},
};
#endif
#if defined(CONFIG_CRYPTO_DEV_QCRYPTO) || \
defined(CONFIG_CRYPTO_DEV_QCRYPTO_MODULE) || \
defined(CONFIG_CRYPTO_DEV_QCEDEV) || \
defined(CONFIG_CRYPTO_DEV_QCEDEV_MODULE)
#define QCE_SIZE 0x10000
#define QCE_0_BASE 0x18500000
#define QCE_HW_KEY_SUPPORT 0
#define QCE_SHA_HMAC_SUPPORT 1
#define QCE_SHARE_CE_RESOURCE 1
#define QCE_CE_SHARED 0
/* Begin Bus scaling definitions */
static struct msm_bus_vectors crypto_hw_init_vectors[] = {
{
.src = MSM_BUS_MASTER_ADM_PORT0,
.dst = MSM_BUS_SLAVE_EBI_CH0,
.ab = 0,
.ib = 0,
},
{
.src = MSM_BUS_MASTER_ADM_PORT1,
.dst = MSM_BUS_SLAVE_GSBI1_UART,
.ab = 0,
.ib = 0,
},
};
static struct msm_bus_vectors crypto_hw_active_vectors[] = {
{
.src = MSM_BUS_MASTER_ADM_PORT0,
.dst = MSM_BUS_SLAVE_EBI_CH0,
.ab = 70000000UL,
.ib = 70000000UL,
},
{
.src = MSM_BUS_MASTER_ADM_PORT1,
.dst = MSM_BUS_SLAVE_GSBI1_UART,
.ab = 2480000000UL,
.ib = 2480000000UL,
},
};
static struct msm_bus_paths crypto_hw_bus_scale_usecases[] = {
{
ARRAY_SIZE(crypto_hw_init_vectors),
crypto_hw_init_vectors,
},
{
ARRAY_SIZE(crypto_hw_active_vectors),
crypto_hw_active_vectors,
},
};
static struct msm_bus_scale_pdata crypto_hw_bus_scale_pdata = {
crypto_hw_bus_scale_usecases,
ARRAY_SIZE(crypto_hw_bus_scale_usecases),
.name = "cryptohw",
};
/* End Bus Scaling Definitions*/
static struct resource qcrypto_resources[] = {
[0] = {
.start = QCE_0_BASE,
.end = QCE_0_BASE + QCE_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "crypto_channels",
.start = DMOV_CE_IN_CHAN,
.end = DMOV_CE_OUT_CHAN,
.flags = IORESOURCE_DMA,
},
[2] = {
.name = "crypto_crci_in",
.start = DMOV_CE_IN_CRCI,
.end = DMOV_CE_IN_CRCI,
.flags = IORESOURCE_DMA,
},
[3] = {
.name = "crypto_crci_out",
.start = DMOV_CE_OUT_CRCI,
.end = DMOV_CE_OUT_CRCI,
.flags = IORESOURCE_DMA,
},
};
static struct resource qcedev_resources[] = {
[0] = {
.start = QCE_0_BASE,
.end = QCE_0_BASE + QCE_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "crypto_channels",
.start = DMOV_CE_IN_CHAN,
.end = DMOV_CE_OUT_CHAN,
.flags = IORESOURCE_DMA,
},
[2] = {
.name = "crypto_crci_in",
.start = DMOV_CE_IN_CRCI,
.end = DMOV_CE_IN_CRCI,
.flags = IORESOURCE_DMA,
},
[3] = {
.name = "crypto_crci_out",
.start = DMOV_CE_OUT_CRCI,
.end = DMOV_CE_OUT_CRCI,
.flags = IORESOURCE_DMA,
},
};
#endif
#if defined(CONFIG_CRYPTO_DEV_QCRYPTO) || \
defined(CONFIG_CRYPTO_DEV_QCRYPTO_MODULE)
static struct msm_ce_hw_support qcrypto_ce_hw_suppport = {
.ce_shared = QCE_CE_SHARED,
.shared_ce_resource = QCE_SHARE_CE_RESOURCE,
.hw_key_support = QCE_HW_KEY_SUPPORT,
.sha_hmac = QCE_SHA_HMAC_SUPPORT,
.bus_scale_table = &crypto_hw_bus_scale_pdata,
};
static struct platform_device qcrypto_device = {
.name = "qcrypto",
.id = 0,
.num_resources = ARRAY_SIZE(qcrypto_resources),
.resource = qcrypto_resources,
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &qcrypto_ce_hw_suppport,
},
};
#endif
#if defined(CONFIG_CRYPTO_DEV_QCEDEV) || \
defined(CONFIG_CRYPTO_DEV_QCEDEV_MODULE)
static struct msm_ce_hw_support qcedev_ce_hw_suppport = {
.ce_shared = QCE_CE_SHARED,
.shared_ce_resource = QCE_SHARE_CE_RESOURCE,
.hw_key_support = QCE_HW_KEY_SUPPORT,
.sha_hmac = QCE_SHA_HMAC_SUPPORT,
.bus_scale_table = &crypto_hw_bus_scale_pdata,
};
static struct platform_device qcedev_device = {
.name = "qce",
.id = 0,
.num_resources = ARRAY_SIZE(qcedev_resources),
.resource = qcedev_resources,
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &qcedev_ce_hw_suppport,
},
};
#endif
#define MDM2AP_ERRFATAL 70
#define AP2MDM_ERRFATAL 95
#define MDM2AP_STATUS 69
#define AP2MDM_STATUS 94
#define AP2MDM_PMIC_RESET_N 80
#define AP2MDM_KPDPWR_N 81
static struct resource mdm_resources[] = {
{
.start = MDM2AP_ERRFATAL,
.end = MDM2AP_ERRFATAL,
.name = "MDM2AP_ERRFATAL",
.flags = IORESOURCE_IO,
},
{
.start = AP2MDM_ERRFATAL,
.end = AP2MDM_ERRFATAL,
.name = "AP2MDM_ERRFATAL",
.flags = IORESOURCE_IO,
},
{
.start = MDM2AP_STATUS,
.end = MDM2AP_STATUS,
.name = "MDM2AP_STATUS",
.flags = IORESOURCE_IO,
},
{
.start = AP2MDM_STATUS,
.end = AP2MDM_STATUS,
.name = "AP2MDM_STATUS",
.flags = IORESOURCE_IO,
},
{
.start = AP2MDM_PMIC_RESET_N,
.end = AP2MDM_PMIC_RESET_N,
.name = "AP2MDM_PMIC_RESET_N",
.flags = IORESOURCE_IO,
},
{
.start = AP2MDM_KPDPWR_N,
.end = AP2MDM_KPDPWR_N,
.name = "AP2MDM_KPDPWR_N",
.flags = IORESOURCE_IO,
},
};
static struct mdm_platform_data mdm_platform_data = {
.mdm_version = "2.5",
};
static struct platform_device mdm_device = {
.name = "mdm2_modem",
.id = -1,
.num_resources = ARRAY_SIZE(mdm_resources),
.resource = mdm_resources,
.dev = {
.platform_data = &mdm_platform_data,
},
};
static struct platform_device *mdm_devices[] __initdata = {
&mdm_device,
};
#ifdef CONFIG_MSM_MPM
static uint16_t msm_mpm_irqs_m2a[MSM_MPM_NR_MPM_IRQS] __initdata = {
[1] = MSM_GPIO_TO_INT(46),
[2] = MSM_GPIO_TO_INT(150),
[4] = MSM_GPIO_TO_INT(103),
[5] = MSM_GPIO_TO_INT(104),
[6] = MSM_GPIO_TO_INT(105),
[7] = MSM_GPIO_TO_INT(106),
[8] = MSM_GPIO_TO_INT(107),
[9] = MSM_GPIO_TO_INT(7),
[10] = MSM_GPIO_TO_INT(11),
[11] = MSM_GPIO_TO_INT(15),
[12] = MSM_GPIO_TO_INT(19),
[13] = MSM_GPIO_TO_INT(23),
[14] = MSM_GPIO_TO_INT(27),
[15] = MSM_GPIO_TO_INT(31),
[16] = MSM_GPIO_TO_INT(35),
[19] = MSM_GPIO_TO_INT(90),
[20] = MSM_GPIO_TO_INT(92),
[23] = MSM_GPIO_TO_INT(85),
[24] = MSM_GPIO_TO_INT(83),
[25] = USB1_HS_IRQ,
[26] = MSM_GPIO_TO_INT(6),
[27] = HDMI_IRQ,
[29] = MSM_GPIO_TO_INT(10),
[30] = MSM_GPIO_TO_INT(102),
[31] = MSM_GPIO_TO_INT(81),
[32] = MSM_GPIO_TO_INT(78),
[33] = MSM_GPIO_TO_INT(94),
[34] = MSM_GPIO_TO_INT(72),
[35] = MSM_GPIO_TO_INT(39),
[36] = MSM_GPIO_TO_INT(43),
[37] = MSM_GPIO_TO_INT(61),
[38] = MSM_GPIO_TO_INT(50),
[39] = MSM_GPIO_TO_INT(42),
[41] = MSM_GPIO_TO_INT(62),
[42] = MSM_GPIO_TO_INT(8),
[43] = MSM_GPIO_TO_INT(33),
[44] = MSM_GPIO_TO_INT(70),
[45] = MSM_GPIO_TO_INT(69),
[46] = MSM_GPIO_TO_INT(67),
[47] = MSM_GPIO_TO_INT(65),
[48] = MSM_GPIO_TO_INT(55),
[49] = MSM_GPIO_TO_INT(74),
[50] = MSM_GPIO_TO_INT(98),
[51] = MSM_GPIO_TO_INT(49),
[52] = MSM_GPIO_TO_INT(40),
[53] = MSM_GPIO_TO_INT(37),
[54] = MSM_GPIO_TO_INT(24),
[55] = MSM_GPIO_TO_INT(14),
};
static uint16_t msm_mpm_bypassed_apps_irqs[] __initdata = {
TLMM_MSM_SUMMARY_IRQ,
RPM_APCC_CPU0_GP_HIGH_IRQ,
RPM_APCC_CPU0_GP_MEDIUM_IRQ,
RPM_APCC_CPU0_GP_LOW_IRQ,
RPM_APCC_CPU0_WAKE_UP_IRQ,
RPM_APCC_CPU1_GP_HIGH_IRQ,
RPM_APCC_CPU1_GP_MEDIUM_IRQ,
RPM_APCC_CPU1_GP_LOW_IRQ,
RPM_APCC_CPU1_WAKE_UP_IRQ,
MSS_TO_APPS_IRQ_0,
MSS_TO_APPS_IRQ_1,
MSS_TO_APPS_IRQ_2,
MSS_TO_APPS_IRQ_3,
MSS_TO_APPS_IRQ_4,
MSS_TO_APPS_IRQ_5,
MSS_TO_APPS_IRQ_6,
MSS_TO_APPS_IRQ_7,
MSS_TO_APPS_IRQ_8,
MSS_TO_APPS_IRQ_9,
LPASS_SCSS_GP_LOW_IRQ,
LPASS_SCSS_GP_MEDIUM_IRQ,
LPASS_SCSS_GP_HIGH_IRQ,
SPS_MTI_30,
SPS_MTI_31,
RIVA_APSS_SPARE_IRQ,
RIVA_APPS_WLAN_SMSM_IRQ,
RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ,
RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ,
};
struct msm_mpm_device_data msm8930_mpm_dev_data __initdata = {
.irqs_m2a = msm_mpm_irqs_m2a,
.irqs_m2a_size = ARRAY_SIZE(msm_mpm_irqs_m2a),
.bypassed_apps_irqs = msm_mpm_bypassed_apps_irqs,
.bypassed_apps_irqs_size = ARRAY_SIZE(msm_mpm_bypassed_apps_irqs),
.mpm_request_reg_base = MSM_RPM_BASE + 0x9d8,
.mpm_status_reg_base = MSM_RPM_BASE + 0xdf8,
.mpm_apps_ipc_reg = MSM_APCS_GCC_BASE + 0x008,
.mpm_apps_ipc_val = BIT(1),
.mpm_ipc_irq = RPM_APCC_CPU0_GP_MEDIUM_IRQ,
};
#endif
#define MSM_SHARED_RAM_PHYS 0x80000000
static void __init msm8930_map_io(void)
{
msm_shared_ram_phys = MSM_SHARED_RAM_PHYS;
msm_map_msm8930_io();
if (socinfo_init() < 0)
pr_err("socinfo_init() failed!\n");
}
static void __init msm8930_init_irq(void)
{
struct msm_mpm_device_data *data = NULL;
#ifdef CONFIG_MSM_MPM
data = &msm8930_mpm_dev_data;
#endif
msm_mpm_irq_extn_init(data);
gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
(void *)MSM_QGIC_CPU_BASE);
}
static void __init msm8930_init_buses(void)
{
#ifdef CONFIG_MSM_BUS_SCALING
msm_bus_rpm_set_mt_mask();
msm_bus_8930_apps_fabric_pdata.rpm_enabled = 1;
msm_bus_8930_sys_fabric_pdata.rpm_enabled = 1;
msm_bus_8930_mm_fabric_pdata.rpm_enabled = 1;
msm_bus_8930_apps_fabric.dev.platform_data =
&msm_bus_8930_apps_fabric_pdata;
msm_bus_8930_sys_fabric.dev.platform_data =
&msm_bus_8930_sys_fabric_pdata;
msm_bus_8930_mm_fabric.dev.platform_data =
&msm_bus_8930_mm_fabric_pdata;
msm_bus_8930_sys_fpb.dev.platform_data = &msm_bus_8930_sys_fpb_pdata;
msm_bus_8930_cpss_fpb.dev.platform_data = &msm_bus_8930_cpss_fpb_pdata;
#endif
}
static struct msm_spi_platform_data msm8960_qup_spi_gsbi1_pdata = {
.max_clock_speed = 15060000,
};
#ifdef CONFIG_USB_MSM_OTG_72K
static struct msm_otg_platform_data msm_otg_pdata;
#else
static int enable_usb_host_mode;
static int __init usb_host_mode_with_pm8917(char *param)
{
int ret;
ret = kstrtoint(param, 10, &enable_usb_host_mode);
return ret;
}
early_param("usb_host_mode_pm8917", usb_host_mode_with_pm8917);
#ifdef CONFIG_MSM_BUS_SCALING
/* Bandwidth requests (zero) if no vote placed */
static struct msm_bus_vectors usb_init_vectors[] = {
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_EBI_CH0,
.ab = 0,
.ib = 0,
},
};
/* Bus bandwidth requests in Bytes/sec */
static struct msm_bus_vectors usb_max_vectors[] = {
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_EBI_CH0,
.ab = 60000000, /* At least 480Mbps on bus. */
.ib = 960000000, /* MAX bursts rate */
},
};
static struct msm_bus_paths usb_bus_scale_usecases[] = {
{
ARRAY_SIZE(usb_init_vectors),
usb_init_vectors,
},
{
ARRAY_SIZE(usb_max_vectors),
usb_max_vectors,
},
};
static struct msm_bus_scale_pdata usb_bus_scale_pdata = {
usb_bus_scale_usecases,
ARRAY_SIZE(usb_bus_scale_usecases),
.name = "usb",
};
#endif
static int hsusb_phy_init_seq[] = {
0x44, 0x80, /* set VBUS valid threshold
and disconnect valid threshold */
0x68, 0x81, /* update DC voltage level */
0x24, 0x82, /* set preemphasis and rise/fall time */
0x13, 0x83, /* set source impedance adjusment */
-1};
#define MSM_MPM_PIN_USB1_OTGSESSVLD 40
static struct msm_otg_platform_data msm_otg_pdata = {
.mode = USB_OTG,
.otg_control = OTG_PMIC_CONTROL,
.phy_type = SNPS_28NM_INTEGRATED_PHY,
.power_budget = 750,
#ifdef CONFIG_MSM_BUS_SCALING
.bus_scale_table = &usb_bus_scale_pdata,
#endif
#ifdef CONFIG_FB_MSM_HDMI_MHL_8334
.mhl_dev_name = "sii8334",
#endif
.mpm_otgsessvld_int = MSM_MPM_PIN_USB1_OTGSESSVLD,
};
#endif
#define PID_MAGIC_ID 0x71432909
#define SERIAL_NUM_MAGIC_ID 0x61945374
#define SERIAL_NUMBER_LENGTH 127
#define DLOAD_USB_BASE_ADD 0x2A03F0C8
struct magic_num_struct {
uint32_t pid;
uint32_t serial_num;
};
struct dload_struct {
uint32_t reserved1;
uint32_t reserved2;
uint32_t reserved3;
uint16_t reserved4;
uint16_t pid;
char serial_number[SERIAL_NUMBER_LENGTH];
uint16_t reserved5;
struct magic_num_struct magic_struct;
};
static int usb_diag_update_pid_and_serial_num(uint32_t pid, const char *snum)
{
struct dload_struct __iomem *dload = 0;
dload = ioremap(DLOAD_USB_BASE_ADD, sizeof(*dload));
if (!dload) {
pr_err("%s: cannot remap I/O memory region: %08x\n",
__func__, DLOAD_USB_BASE_ADD);
return -ENXIO;
}
pr_debug("%s: dload:%p pid:%x serial_num:%s\n",
__func__, dload, pid, snum);
/* update pid */
dload->magic_struct.pid = PID_MAGIC_ID;
dload->pid = pid;
/* update serial number */
dload->magic_struct.serial_num = 0;
if (!snum) {
memset(dload->serial_number, 0, SERIAL_NUMBER_LENGTH);
goto out;
}
dload->magic_struct.serial_num = SERIAL_NUM_MAGIC_ID;
strlcpy(dload->serial_number, snum, SERIAL_NUMBER_LENGTH);
out:
iounmap(dload);
return 0;
}
static struct android_usb_platform_data android_usb_pdata = {
.update_pid_and_serial_num = usb_diag_update_pid_and_serial_num,
};
static struct platform_device android_usb_device = {
.name = "android_usb",
.id = -1,
.dev = {
.platform_data = &android_usb_pdata,
},
};
static uint8_t spm_wfi_cmd_sequence[] __initdata = {
0x03, 0x0f,
};
static uint8_t spm_retention_cmd_sequence[] __initdata = {
0x00, 0x05, 0x03, 0x0D,
0x0B, 0x00, 0x0f,
};
static uint8_t spm_retention_with_krait_v3_cmd_sequence[] __initdata = {
0x42, 0x1B, 0x00,
0x05, 0x03, 0x01, 0x0B,
0x00, 0x42, 0x1B,
0x0f,
};
static uint8_t spm_power_collapse_without_rpm[] __initdata = {
0x00, 0x24, 0x54, 0x10,
0x09, 0x03, 0x01,
0x10, 0x54, 0x30, 0x0C,
0x24, 0x30, 0x0f,
};
static uint8_t spm_power_collapse_with_rpm[] __initdata = {
0x00, 0x24, 0x54, 0x10,
0x09, 0x07, 0x01, 0x0B,
0x10, 0x54, 0x30, 0x0C,
0x24, 0x30, 0x0f,
};
static struct msm_spm_seq_entry msm_spm_boot_cpu_seq_list[] __initdata = {
[0] = {
.mode = MSM_SPM_MODE_CLOCK_GATING,
.notify_rpm = false,
.cmd = spm_wfi_cmd_sequence,
},
[1] = {
.mode = MSM_SPM_MODE_POWER_RETENTION,
.notify_rpm = false,
.cmd = spm_retention_cmd_sequence,
},
[2] = {
.mode = MSM_SPM_MODE_POWER_COLLAPSE,
.notify_rpm = false,
.cmd = spm_power_collapse_without_rpm,
},
[3] = {
.mode = MSM_SPM_MODE_POWER_COLLAPSE,
.notify_rpm = true,
.cmd = spm_power_collapse_with_rpm,
},
};
static struct msm_spm_seq_entry msm_spm_nonboot_cpu_seq_list[] __initdata = {
[0] = {
.mode = MSM_SPM_MODE_CLOCK_GATING,
.notify_rpm = false,
.cmd = spm_wfi_cmd_sequence,
},
[1] = {
.mode = MSM_SPM_MODE_POWER_RETENTION,
.notify_rpm = false,
.cmd = spm_retention_cmd_sequence,
},
[2] = {
.mode = MSM_SPM_MODE_POWER_COLLAPSE,
.notify_rpm = false,
.cmd = spm_power_collapse_without_rpm,
},
[3] = {
.mode = MSM_SPM_MODE_POWER_COLLAPSE,
.notify_rpm = true,
.cmd = spm_power_collapse_with_rpm,
},
};
static struct msm_spm_platform_data msm_spm_data[] __initdata = {
[0] = {
.reg_base_addr = MSM_SAW0_BASE,
.reg_init_values[MSM_SPM_REG_SAW2_CFG] = 0x1F,
#if defined(CONFIG_MSM_AVS_HW)
.reg_init_values[MSM_SPM_REG_SAW2_AVS_CTL] = 0x00,
.reg_init_values[MSM_SPM_REG_SAW2_AVS_HYSTERESIS] = 0x00,
#endif
.reg_init_values[MSM_SPM_REG_SAW2_SPM_CTL] = 0x01,
.reg_init_values[MSM_SPM_REG_SAW2_PMIC_DLY] = 0x03020004,
.reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_0] = 0x0084009C,
.reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_1] = 0x00A4001C,
.vctl_timeout_us = 50,
.num_modes = ARRAY_SIZE(msm_spm_boot_cpu_seq_list),
.modes = msm_spm_boot_cpu_seq_list,
},
[1] = {
.reg_base_addr = MSM_SAW1_BASE,
.reg_init_values[MSM_SPM_REG_SAW2_CFG] = 0x1F,
#if defined(CONFIG_MSM_AVS_HW)
.reg_init_values[MSM_SPM_REG_SAW2_AVS_CTL] = 0x00,
.reg_init_values[MSM_SPM_REG_SAW2_AVS_HYSTERESIS] = 0x00,
#endif
.reg_init_values[MSM_SPM_REG_SAW2_SPM_CTL] = 0x01,
.reg_init_values[MSM_SPM_REG_SAW2_PMIC_DLY] = 0x02020204,
.reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_0] = 0x0060009C,
.reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_1] = 0x0000001C,
.vctl_timeout_us = 50,
.num_modes = ARRAY_SIZE(msm_spm_nonboot_cpu_seq_list),
.modes = msm_spm_nonboot_cpu_seq_list,
},
};
static uint8_t l2_spm_wfi_cmd_sequence[] __initdata = {
0x00, 0x20, 0x03, 0x20,
0x00, 0x0f,
};
static uint8_t l2_spm_gdhs_cmd_sequence[] __initdata = {
0x00, 0x20, 0x34, 0x64,
0x48, 0x07, 0x48, 0x20,
0x50, 0x64, 0x04, 0x34,
0x50, 0x0f,
};
static uint8_t l2_spm_power_off_cmd_sequence[] __initdata = {
0x00, 0x10, 0x34, 0x64,
0x48, 0x07, 0x48, 0x10,
0x50, 0x64, 0x04, 0x34,
0x50, 0x0F,
};
static struct msm_spm_seq_entry msm_spm_l2_seq_list[] __initdata = {
[0] = {
.mode = MSM_SPM_L2_MODE_RETENTION,
.notify_rpm = false,
.cmd = l2_spm_wfi_cmd_sequence,
},
[1] = {
.mode = MSM_SPM_L2_MODE_GDHS,
.notify_rpm = true,
.cmd = l2_spm_gdhs_cmd_sequence,
},
[2] = {
.mode = MSM_SPM_L2_MODE_POWER_COLLAPSE,
.notify_rpm = true,
.cmd = l2_spm_power_off_cmd_sequence,
},
};
static struct msm_spm_platform_data msm_spm_l2_data[] __initdata = {
[0] = {
.reg_base_addr = MSM_SAW_L2_BASE,
.reg_init_values[MSM_SPM_REG_SAW2_SPM_CTL] = 0x00,
.reg_init_values[MSM_SPM_REG_SAW2_PMIC_DLY] = 0x02020204,
.reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_0] = 0x00A000AE,
.reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_1] = 0x00A00020,
.modes = msm_spm_l2_seq_list,
.num_modes = ARRAY_SIZE(msm_spm_l2_seq_list),
},
};
#define ISA1200_HAP_EN_GPIO 77
#define ISA1200_HAP_LEN_GPIO 78
#define ISA1200_HAP_CLK_PM8038 PM8038_GPIO_PM_TO_SYS(7)
#define ISA1200_HAP_CLK_PM8917 PM8917_GPIO_PM_TO_SYS(38)
static int isa1200_power(int on)
{
unsigned int gpio = ISA1200_HAP_CLK_PM8038;
enum pm8xxx_aux_clk_id clk_id = CLK_MP3_1;
int rc = 0;
if (socinfo_get_pmic_model() == PMIC_MODEL_PM8917) {
gpio = ISA1200_HAP_CLK_PM8917;
clk_id = CLK_MP3_2;
}
gpio_set_value_cansleep(gpio, !!on);
if (on)
rc = pm8xxx_aux_clk_control(clk_id, XO_DIV_1, true);
else
rc = pm8xxx_aux_clk_control(clk_id, XO_DIV_NONE, true);
if (rc) {
pr_err("%s: unable to write aux clock register(%d)\n",
__func__, rc);
}
return rc;
}
static int isa1200_dev_setup(bool enable)
{
unsigned int gpio = ISA1200_HAP_CLK_PM8038;
int rc = 0;
if (socinfo_get_pmic_model() == PMIC_MODEL_PM8917)
gpio = ISA1200_HAP_CLK_PM8917;
if (!enable)
goto fail_gpio_dir;
rc = gpio_request(gpio, "haptics_clk");
if (rc) {
pr_err("%s: gpio_request for %d gpio failed rc(%d)\n",
__func__, gpio, rc);
goto fail_gpio_req;
}
rc = gpio_direction_output(gpio, 0);
if (rc) {
pr_err("%s: gpio_direction_output failed for %d gpio rc(%d)\n",
__func__, gpio, rc);
goto fail_gpio_dir;
}
return 0;
fail_gpio_dir:
gpio_free(gpio);
fail_gpio_req:
return rc;
}
static struct isa1200_regulator isa1200_reg_data[] = {
{
.name = "vddp",
.min_uV = ISA_I2C_VTG_MIN_UV,
.max_uV = ISA_I2C_VTG_MAX_UV,
.load_uA = ISA_I2C_CURR_UA,
},
{
.name = "vcc_i2c",
.min_uV = ISA_I2C_VTG_MIN_UV,
.max_uV = ISA_I2C_VTG_MAX_UV,
.load_uA = ISA_I2C_CURR_UA,
},
};
static struct isa1200_platform_data isa1200_1_pdata = {
.name = "vibrator",
.dev_setup = isa1200_dev_setup,
.power_on = isa1200_power,
.hap_en_gpio = ISA1200_HAP_EN_GPIO,
.hap_len_gpio = ISA1200_HAP_LEN_GPIO,
.max_timeout = 15000,
.mode_ctrl = PWM_GEN_MODE,
.pwm_fd = {
.pwm_div = 256,
},
.is_erm = false,
.smart_en = true,
.ext_clk_en = true,
.chip_en = 1,
.regulator_info = isa1200_reg_data,
.num_regulators = ARRAY_SIZE(isa1200_reg_data),
};
static struct i2c_board_info msm_isa1200_board_info[] __initdata = {
{
I2C_BOARD_INFO("isa1200_1", 0x90>>1),
.platform_data = &isa1200_1_pdata,
},
};
#define MXT_TS_GPIO_IRQ 11
#define MXT_TS_RESET_GPIO 52
static const u8 mxt_config_data_8930_v1[] = {
/* T6 Object */
0, 0, 0, 0, 0, 0,
/* T38 Object */
15, 3, 0, 15, 12, 11, 0, 0,
/* T7 Object */
32, 16, 50,
/* T8 Object */
30, 0, 5, 1, 0, 0, 8, 8, 0, 0,
/* T9 Object */
131, 0, 0, 19, 11, 0, 16, 43, 2, 3,
10, 7, 2, 0, 4, 5, 35, 10, 43, 4,
54, 2, 15, 32, 38, 38, 143, 40, 143, 80,
7, 9, 50, 50, 2,
/* T15 Object */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0,
/* T18 Object */
0, 0,
/* T19 Object */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0,
/* T23 Object */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0,
/* T25 Object */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0,
/* T40 Object */
0, 0, 0, 0, 0,
/* T42 Object */
0, 0, 0, 0, 0, 0, 0, 0,
/* T46 Object */
0, 3, 8, 16, 0, 0, 1, 0, 0,
/* T47 Object */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/* T48 Object */
0, 0, 8, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 100, 4, 64,
0, 0, 5, 42, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0,
};
static const u8 mxt_config_data_8930_v2[] = {
/* T6 Object */
0, 0, 0, 0, 0, 0,
/* T38 Object */
15, 4, 0, 9, 7, 12, 0, 0,
/* T7 Object */
32, 16, 50,
/* T8 Object */
30, 0, 5, 10, 0, 0, 10, 10, 0, 0,
/* T9 Object */
131, 0, 0, 19, 11, 0, 16, 50, 1, 3,
12, 7, 2, 0, 4, 5, 2, 10, 43, 4,
54, 2, -25, 29, 38, 18, 143, 40, 207, 80,
17, 5, 50, 50, 0,
/* T18 Object */
0, 0,
/* T19 Object */
0, 0, 0, 0, 0, 0,
/* T25 Object */
0, 0, 0, 0, 0, 0,
/* T42 Object */
3, 60, 20, 20, 150, 0, 0, 0,
/* T46 Object */
0, 3, 28, 28, 0, 0, 1, 0, 0,
/* T47 Object */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/* T48 Object */
1, 3, 82, 0, 0, 0, 0, 0, 0, 0,
16, 30, 0, 6, 6, 0, 0, 124, 4, 100,
0, 0, 0, 5, 0, 42, 0, 1, 0, 40,
52, 20, 0, 0, 0, 50, 1, 5, 2, 1,
4, 5, 3, -25, 29, 38, 18, 143, 40, 207,
80, 10, 5, 2,
/* T55 Object */
0, 0, 0, 0,
};
static ssize_t mxt224e_vkeys_show(struct kobject *kobj,
struct kobj_attribute *attr, char *buf)
{
return snprintf(buf, 200,
__stringify(EV_KEY) ":" __stringify(KEY_BACK) ":57:1030:90:90"
":" __stringify(EV_KEY) ":" __stringify(KEY_MENU) ":206:1030:90:90"
":" __stringify(EV_KEY) ":" __stringify(KEY_HOME) ":366:1030:90:90"
":" __stringify(EV_KEY) ":" __stringify(KEY_SEARCH) ":503:1030:90:90"
"\n");
}
static struct kobj_attribute mxt224e_vkeys_attr = {
.attr = {
.mode = S_IRUGO,
},
.show = &mxt224e_vkeys_show,
};
static struct attribute *mxt224e_properties_attrs[] = {
&mxt224e_vkeys_attr.attr,
NULL
};
static struct attribute_group mxt224e_properties_attr_group = {
.attrs = mxt224e_properties_attrs,
};
static void mxt_init_vkeys_8930(void)
{
int rc = 0;
static struct kobject *mxt224e_properties_kobj;
mxt224e_vkeys_attr.attr.name = "virtualkeys.atmel_mxt_ts";
mxt224e_properties_kobj = kobject_create_and_add("board_properties",
NULL);
if (mxt224e_properties_kobj)
rc = sysfs_create_group(mxt224e_properties_kobj,
&mxt224e_properties_attr_group);
if (!mxt224e_properties_kobj || rc)
pr_err("%s: failed to create board_properties\n",
__func__);
return;
}
static struct mxt_config_info mxt_config_array[] = {
{
.config = mxt_config_data_8930_v1,
.config_length = ARRAY_SIZE(mxt_config_data_8930_v1),
.family_id = 0x81,
.variant_id = 0x01,
.version = 0x10,
.build = 0xAA,
.bootldr_id = MXT_BOOTLOADER_ID_224E,
.fw_name = "atmel_8930_fluid_v2_0_AB.hex",
},
{
.config = mxt_config_data_8930_v2,
.config_length = ARRAY_SIZE(mxt_config_data_8930_v2),
.family_id = 0x81,
.variant_id = 0x15,
.version = 0x11,
.build = 0xAA,
.bootldr_id = MXT_BOOTLOADER_ID_224E,
.fw_name = "atmel_8930_fluid_v2_0_AB.hex",
},
{
.config = mxt_config_data_8930_v2,
.config_length = ARRAY_SIZE(mxt_config_data_8930_v2),
.family_id = 0x81,
.variant_id = 0x01,
.version = 0x20,
.build = 0xAB,
.bootldr_id = MXT_BOOTLOADER_ID_224E,
},
};
static struct mxt_platform_data mxt_platform_data_8930 = {
.config_array = mxt_config_array,
.config_array_size = ARRAY_SIZE(mxt_config_array),
.panel_minx = 0,
.panel_maxx = 566,
.panel_miny = 0,
.panel_maxy = 1067,
.disp_minx = 0,
.disp_maxx = 540,
.disp_miny = 0,
.disp_maxy = 960,
.irqflags = IRQF_TRIGGER_FALLING,
#ifdef MSM8930_PHASE_2
.digital_pwr_regulator = true,
#endif
.i2c_pull_up = true,
.reset_gpio = MXT_TS_RESET_GPIO,
.irq_gpio = MXT_TS_GPIO_IRQ,
};
static struct i2c_board_info mxt_device_info_8930[] __initdata = {
{
I2C_BOARD_INFO("atmel_mxt_ts", 0x4a),
.platform_data = &mxt_platform_data_8930,
.irq = MSM_GPIO_TO_INT(MXT_TS_GPIO_IRQ),
},
};
#define MHL_POWER_GPIO_PM8038 PM8038_GPIO_PM_TO_SYS(MHL_GPIO_PWR_EN)
#define MHL_POWER_GPIO_PM8917 PM8917_GPIO_PM_TO_SYS(25)
static struct msm_mhl_platform_data mhl_platform_data = {
.irq = MSM_GPIO_TO_INT(MHL_GPIO_INT),
.gpio_mhl_int = MHL_GPIO_INT,
.gpio_mhl_reset = MHL_GPIO_RESET,
.gpio_mhl_power = MHL_POWER_GPIO_PM8038,
.gpio_hdmi_mhl_mux = HDMI_MHL_MUX_GPIO,
};
static struct i2c_board_info sii_device_info[] __initdata = {
{
/*
* keeps SI 8334 as the default
* MHL TX
*/
I2C_BOARD_INFO("sii8334", 0x39),
.platform_data = &mhl_platform_data,
.flags = I2C_CLIENT_WAKE,
},
};
#ifdef MSM8930_PHASE_2
#define GPIO_VOLUME_UP_PM8038 PM8038_GPIO_PM_TO_SYS(3)
#define GPIO_VOLUME_DOWN_PM8038 PM8038_GPIO_PM_TO_SYS(8)
#define GPIO_CAMERA_SNAPSHOT_PM8038 PM8038_GPIO_PM_TO_SYS(10)
#define GPIO_CAMERA_FOCUS_PM8038 PM8038_GPIO_PM_TO_SYS(11)
#define GPIO_VOLUME_UP_PM8917 PM8917_GPIO_PM_TO_SYS(27)
#define GPIO_VOLUME_DOWN_PM8917 PM8917_GPIO_PM_TO_SYS(28)
#define GPIO_CAMERA_SNAPSHOT_PM8917 PM8917_GPIO_PM_TO_SYS(36)
#define GPIO_CAMERA_FOCUS_PM8917 PM8917_GPIO_PM_TO_SYS(37)
static struct gpio_keys_button keys_8930_pm8038[] = {
{
.code = KEY_VOLUMEUP,
.type = EV_KEY,
.desc = "volume_up",
.gpio = GPIO_VOLUME_UP_PM8038,
.wakeup = 1,
.active_low = 1,
.debounce_interval = 15,
},
{
.code = KEY_VOLUMEDOWN,
.type = EV_KEY,
.desc = "volume_down",
.gpio = GPIO_VOLUME_DOWN_PM8038,
.wakeup = 1,
.active_low = 1,
.debounce_interval = 15,
},
{
.code = KEY_CAMERA_FOCUS,
.type = EV_KEY,
.desc = "camera_focus",
.gpio = GPIO_CAMERA_FOCUS_PM8038,
.wakeup = 1,
.active_low = 1,
.debounce_interval = 15,
},
{
.code = KEY_CAMERA_SNAPSHOT,
.type = EV_KEY,
.desc = "camera_snapshot",
.gpio = GPIO_CAMERA_SNAPSHOT_PM8038,
.wakeup = 1,
.active_low = 1,
.debounce_interval = 15,
},
};
static struct gpio_keys_button keys_8930_pm8917[] = {
{
.code = KEY_VOLUMEUP,
.type = EV_KEY,
.desc = "volume_up",
.gpio = GPIO_VOLUME_UP_PM8917,
.wakeup = 1,
.active_low = 1,
.debounce_interval = 15,
},
{
.code = KEY_VOLUMEDOWN,
.type = EV_KEY,
.desc = "volume_down",
.gpio = GPIO_VOLUME_DOWN_PM8917,
.wakeup = 1,
.active_low = 1,
.debounce_interval = 15,
},
{
.code = KEY_CAMERA_FOCUS,
.type = EV_KEY,
.desc = "camera_focus",
.gpio = GPIO_CAMERA_FOCUS_PM8917,
.wakeup = 1,
.active_low = 1,
.debounce_interval = 15,
},
{
.code = KEY_CAMERA_SNAPSHOT,
.type = EV_KEY,
.desc = "camera_snapshot",
.gpio = GPIO_CAMERA_SNAPSHOT_PM8917,
.wakeup = 1,
.active_low = 1,
.debounce_interval = 15,
},
};
/* Add GPIO keys for 8930 */
static struct gpio_keys_platform_data gpio_keys_8930_pdata = {
.buttons = keys_8930_pm8038,
.nbuttons = ARRAY_SIZE(keys_8930_pm8038),
};
static struct platform_device gpio_keys_8930 = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &gpio_keys_8930_pdata,
},
};
#endif /* MSM8930_PHASE_2 */
static struct msm_i2c_platform_data msm8960_i2c_qup_gsbi4_pdata = {
.clk_freq = 100000,
.src_clk_rate = 24000000,
};
static struct msm_i2c_platform_data msm8960_i2c_qup_gsbi3_pdata = {
.clk_freq = 100000,
.src_clk_rate = 24000000,
};
static struct msm_i2c_platform_data msm8960_i2c_qup_gsbi9_pdata = {
.clk_freq = 100000,
.src_clk_rate = 24000000,
};
static struct msm_i2c_platform_data msm8960_i2c_qup_gsbi10_pdata = {
.clk_freq = 100000,
.src_clk_rate = 24000000,
};
static struct msm_i2c_platform_data msm8960_i2c_qup_gsbi12_pdata = {
.clk_freq = 100000,
.src_clk_rate = 24000000,
};
static struct ks8851_pdata spi_eth_pdata = {
.irq_gpio = KS8851_IRQ_GPIO,
.rst_gpio = KS8851_RST_GPIO,
};
static struct spi_board_info spi_board_info[] __initdata = {
{
.modalias = "ks8851",
.irq = MSM_GPIO_TO_INT(KS8851_IRQ_GPIO),
.max_speed_hz = 19200000,
.bus_num = 0,
.chip_select = 0,
.mode = SPI_MODE_0,
.platform_data = &spi_eth_pdata
},
{
.modalias = "dsi_novatek_3d_panel_spi",
.max_speed_hz = 10800000,
.bus_num = 0,
.chip_select = 1,
.mode = SPI_MODE_0,
},
};
static struct platform_device msm_device_saw_core0 = {
.name = "saw-regulator",
.id = 0,
.dev = {
.platform_data = &msm8930_pm8038_saw_regulator_core0_pdata,
},
};
static struct platform_device msm_device_saw_core1 = {
.name = "saw-regulator",
.id = 1,
.dev = {
.platform_data = &msm8930_pm8038_saw_regulator_core1_pdata,
},
};
static struct tsens_platform_data msm_tsens_pdata = {
.tsens_factor = 1000,
.hw_type = APQ_8064,
.tsens_num_sensor = 10,
.slope = {1132, 1135, 1137, 1135, 1157,
1142, 1124, 1153, 1175, 1166},
};
static struct platform_device msm_tsens_device = {
.name = "tsens8960-tm",
.id = -1,
};
static struct msm_thermal_data msm_thermal_pdata = {
.sensor_id = 9,
.poll_ms = 250,
.limit_temp_degC = 60,
.temp_hysteresis_degC = 10,
.freq_step = 2,
};
#ifdef CONFIG_MSM_FAKE_BATTERY
static struct platform_device fish_battery_device = {
.name = "fish_battery",
};
#endif
#ifndef MSM8930_PHASE_2
/* 8930 Phase 1 */
static struct platform_device msm8930_device_ext_5v_vreg __devinitdata = {
.name = GPIO_REGULATOR_DEV_NAME,
.id = PM8921_MPP_PM_TO_SYS(7),
.dev = {
.platform_data = &msm_gpio_regulator_pdata[GPIO_VREG_ID_EXT_5V],
},
};
static struct platform_device msm8930_device_ext_l2_vreg __devinitdata = {
.name = GPIO_REGULATOR_DEV_NAME,
.id = 91,
.dev = {
.platform_data = &msm_gpio_regulator_pdata[GPIO_VREG_ID_EXT_L2],
},
};
#else
/* 8930 Phase 2 */
static struct platform_device msm8930_device_ext_5v_vreg __devinitdata = {
.name = GPIO_REGULATOR_DEV_NAME,
.id = 63,
.dev = {
.platform_data = &msm8930_pm8038_gpio_regulator_pdata[
MSM8930_GPIO_VREG_ID_EXT_5V],
},
};
static struct platform_device msm8930_device_ext_otg_sw_vreg __devinitdata = {
.name = GPIO_REGULATOR_DEV_NAME,
.id = 97,
.dev = {
.platform_data = &msm8930_pm8038_gpio_regulator_pdata[
MSM8930_GPIO_VREG_ID_EXT_OTG_SW],
},
};
#endif
static struct platform_device msm8930_device_rpm_regulator __devinitdata = {
.name = "rpm-regulator",
.id = -1,
.dev = {
#ifndef MSM8930_PHASE_2
.platform_data = &msm_rpm_regulator_pdata,
#else
.platform_data = &msm8930_pm8038_rpm_regulator_pdata,
#endif
},
};
static struct platform_device *early_common_devices[] __initdata = {
&msm8960_device_dmov,
&msm_device_smd,
&msm8960_device_uart_gsbi5,
&msm_device_uart_dm6,
&msm_device_saw_core0,
&msm_device_saw_core1,
};
/* ext_5v and ext_otg_sw are present when using PM8038 */
static struct platform_device *pmic_pm8038_devices[] __initdata = {
&msm8930_device_ext_5v_vreg,
#ifndef MSM8930_PHASE_2
&msm8930_device_ext_l2_vreg,
#endif
&msm8960_device_ssbi_pmic,
#ifdef MSM8930_PHASE_2
&msm8930_device_ext_otg_sw_vreg,
#endif
};
/* ext_5v and ext_otg_sw are not present when using PM8917 */
static struct platform_device *pmic_pm8917_devices[] __initdata = {
&msm8960_device_ssbi_pmic,
};
static struct platform_device *common_devices[] __initdata = {
&msm_8960_q6_lpass,
&msm_8960_riva,
&msm_pil_tzapps,
&msm_pil_vidc,
&msm8960_device_qup_spi_gsbi1,
&msm8960_device_qup_i2c_gsbi3,
&msm8960_device_qup_i2c_gsbi4,
&msm8960_device_qup_i2c_gsbi9,
&msm8960_device_qup_i2c_gsbi10,
&msm8960_device_qup_i2c_gsbi12,
&msm_slim_ctrl,
&msm_device_wcnss_wlan,
#if defined(CONFIG_QSEECOM)
&qseecom_device,
#endif
#if defined(CONFIG_CRYPTO_DEV_QCRYPTO) || \
defined(CONFIG_CRYPTO_DEV_QCRYPTO_MODULE)
&qcrypto_device,
#endif
#if defined(CONFIG_CRYPTO_DEV_QCEDEV) || \
defined(CONFIG_CRYPTO_DEV_QCEDEV_MODULE)
&qcedev_device,
#endif
#ifdef CONFIG_MSM_ROTATOR
&msm_rotator_device,
#endif
&msm_device_sps,
#ifdef CONFIG_MSM_FAKE_BATTERY
&fish_battery_device,
#endif
#ifdef CONFIG_ANDROID_PMEM
#ifndef CONFIG_MSM_MULTIMEDIA_USE_ION
&msm8930_android_pmem_device,
&msm8930_android_pmem_adsp_device,
&msm8930_android_pmem_audio_device,
#endif /*CONFIG_MSM_MULTIMEDIA_USE_ION*/
#endif /*CONFIG_ANDROID_PMEM*/
&msm8930_fmem_device,
&msm_device_bam_dmux,
&msm_fm_platform_init,
#ifdef CONFIG_HW_RANDOM_MSM
&msm_device_rng,
#endif
&msm8930_rpm_device,
&msm8930_rpm_log_device,
&msm8930_rpm_rbcpr_device,
&msm8930_rpm_stat_device,
&msm8930_rpm_master_stat_device,
#ifdef CONFIG_ION_MSM
&msm8930_ion_dev,
#endif
&msm_device_tz_log,
&coresight_tpiu_device,
&coresight_etb_device,
&coresight_funnel_device,
&coresight_etm0_device,
&coresight_etm1_device,
&msm_device_dspcrashd_8960,
&msm8960_device_watchdog,
#ifdef MSM8930_PHASE_2
&gpio_keys_8930,
#endif
&msm8930_rtb_device,
&msm_bus_8930_apps_fabric,
&msm_bus_8930_sys_fabric,
&msm_bus_8930_mm_fabric,
&msm_bus_8930_sys_fpb,
&msm_bus_8930_cpss_fpb,
&msm8960_device_cache_erp,
&msm8930_iommu_domain_device,
&msm_tsens_device,
&msm8930_cache_dump_device,
&msm8930_pc_cntr,
};
static struct platform_device *cdp_devices[] __initdata = {
&msm8960_device_otg,
&msm8960_device_gadget_peripheral,
&msm_device_hsusb_host,
&android_usb_device,
&msm_pcm,
&msm_pcm_routing,
&msm_cpudai0,
&msm_cpudai1,
&msm_cpudai_hdmi_rx,
&msm_cpudai_bt_rx,
&msm_cpudai_bt_tx,
&msm_cpudai_fm_rx,
&msm_cpudai_fm_tx,
&msm_cpudai_auxpcm_rx,
&msm_cpudai_auxpcm_tx,
&msm_cpu_fe,
&msm_stub_codec,
#ifdef CONFIG_MSM_GEMINI
&msm8960_gemini_device,
#endif
&msm_voice,
&msm_voip,
&msm_lpa_pcm,
&msm_cpudai_afe_01_rx,
&msm_cpudai_afe_01_tx,
&msm_cpudai_afe_02_rx,
&msm_cpudai_afe_02_tx,
&msm_pcm_afe,
&msm_compr_dsp,
&msm_cpudai_incall_music_rx,
&msm_cpudai_incall_record_rx,
&msm_cpudai_incall_record_tx,
&msm_pcm_hostless,
&msm_multi_ch_pcm,
&msm_lowlatency_pcm,
};
static void __init msm8930_i2c_init(void)
{
msm8960_device_qup_i2c_gsbi4.dev.platform_data =
&msm8960_i2c_qup_gsbi4_pdata;
msm8960_device_qup_i2c_gsbi3.dev.platform_data =
&msm8960_i2c_qup_gsbi3_pdata;
msm8960_device_qup_i2c_gsbi9.dev.platform_data =
&msm8960_i2c_qup_gsbi9_pdata;
msm8960_device_qup_i2c_gsbi10.dev.platform_data =
&msm8960_i2c_qup_gsbi10_pdata;
msm8960_device_qup_i2c_gsbi12.dev.platform_data =
&msm8960_i2c_qup_gsbi12_pdata;
}
static struct msm_rpmrs_level msm_rpmrs_levels[] __initdata = {
{
MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT,
MSM_RPMRS_LIMITS(ON, ACTIVE, MAX, ACTIVE),
true,
1, 784, 180000, 100,
},
{
MSM_PM_SLEEP_MODE_RETENTION,
MSM_RPMRS_LIMITS(ON, ACTIVE, MAX, ACTIVE),
true,
415, 715, 340827, 475,
},
{
MSM_PM_SLEEP_MODE_POWER_COLLAPSE_STANDALONE,
MSM_RPMRS_LIMITS(ON, ACTIVE, MAX, ACTIVE),
true,
1300, 228, 1200000, 2000,
},
{
MSM_PM_SLEEP_MODE_POWER_COLLAPSE,
MSM_RPMRS_LIMITS(ON, GDHS, MAX, ACTIVE),
false,
2000, 138, 1208400, 3200,
},
{
MSM_PM_SLEEP_MODE_POWER_COLLAPSE,
MSM_RPMRS_LIMITS(ON, HSFS_OPEN, ACTIVE, RET_HIGH),
false,
6000, 119, 1850300, 9000,
},
{
MSM_PM_SLEEP_MODE_POWER_COLLAPSE,
MSM_RPMRS_LIMITS(OFF, GDHS, MAX, ACTIVE),
false,
9200, 68, 2839200, 16400,
},
{
MSM_PM_SLEEP_MODE_POWER_COLLAPSE,
MSM_RPMRS_LIMITS(OFF, HSFS_OPEN, MAX, ACTIVE),
false,
10300, 63, 3128000, 18200,
},
{
MSM_PM_SLEEP_MODE_POWER_COLLAPSE,
MSM_RPMRS_LIMITS(OFF, HSFS_OPEN, ACTIVE, RET_HIGH),
false,
18000, 10, 4602600, 27000,
},
{
MSM_PM_SLEEP_MODE_POWER_COLLAPSE,
MSM_RPMRS_LIMITS(OFF, HSFS_OPEN, RET_HIGH, RET_LOW),
false,
20000, 2, 5752000, 32000,
},
};
static struct msm_rpmrs_platform_data msm_rpmrs_data __initdata = {
.levels = &msm_rpmrs_levels[0],
.num_levels = ARRAY_SIZE(msm_rpmrs_levels),
.vdd_mem_levels = {
[MSM_RPMRS_VDD_MEM_RET_LOW] = 750000,
[MSM_RPMRS_VDD_MEM_RET_HIGH] = 750000,
[MSM_RPMRS_VDD_MEM_ACTIVE] = 1050000,
[MSM_RPMRS_VDD_MEM_MAX] = 1150000,
},
.vdd_dig_levels = {
[MSM_RPMRS_VDD_DIG_RET_LOW] = 0,
[MSM_RPMRS_VDD_DIG_RET_HIGH] = 0,
[MSM_RPMRS_VDD_DIG_ACTIVE] = 1,
[MSM_RPMRS_VDD_DIG_MAX] = 3,
},
.vdd_mask = 0x7FFFFF,
.rpmrs_target_id = {
[MSM_RPMRS_ID_PXO_CLK] = MSM_RPM_ID_PXO_CLK,
[MSM_RPMRS_ID_L2_CACHE_CTL] = MSM_RPM_ID_LAST,
[MSM_RPMRS_ID_VDD_DIG_0] = MSM_RPM_ID_VOLTAGE_CORNER,
[MSM_RPMRS_ID_VDD_DIG_1] = MSM_RPM_ID_LAST,
[MSM_RPMRS_ID_VDD_MEM_0] = MSM_RPM_ID_PM8038_L24_0,
[MSM_RPMRS_ID_VDD_MEM_1] = MSM_RPM_ID_PM8038_L24_1,
[MSM_RPMRS_ID_RPM_CTL] = MSM_RPM_ID_RPM_CTL,
},
};
static struct msm_rpmrs_platform_data msm_rpmrs_data_pm8917 __initdata = {
.levels = &msm_rpmrs_levels[0],
.num_levels = ARRAY_SIZE(msm_rpmrs_levels),
.vdd_mem_levels = {
[MSM_RPMRS_VDD_MEM_RET_LOW] = 750000,
[MSM_RPMRS_VDD_MEM_RET_HIGH] = 750000,
[MSM_RPMRS_VDD_MEM_ACTIVE] = 1050000,
[MSM_RPMRS_VDD_MEM_MAX] = 1150000,
},
.vdd_dig_levels = {
[MSM_RPMRS_VDD_DIG_RET_LOW] = 0,
[MSM_RPMRS_VDD_DIG_RET_HIGH] = 0,
[MSM_RPMRS_VDD_DIG_ACTIVE] = 1,
[MSM_RPMRS_VDD_DIG_MAX] = 3,
},
.vdd_mask = 0x7FFFFF,
.rpmrs_target_id = {
[MSM_RPMRS_ID_PXO_CLK] = MSM_RPM_ID_PXO_CLK,
[MSM_RPMRS_ID_L2_CACHE_CTL] = MSM_RPM_ID_LAST,
[MSM_RPMRS_ID_VDD_DIG_0] = MSM_RPM_ID_VOLTAGE_CORNER,
[MSM_RPMRS_ID_VDD_DIG_1] = MSM_RPM_ID_LAST,
[MSM_RPMRS_ID_VDD_MEM_0] = MSM_RPM_ID_PM8917_L24_0,
[MSM_RPMRS_ID_VDD_MEM_1] = MSM_RPM_ID_PM8917_L24_1,
[MSM_RPMRS_ID_RPM_CTL] = MSM_RPM_ID_RPM_CTL,
},
};
static struct msm_pm_boot_platform_data msm_pm_boot_pdata __initdata = {
.mode = MSM_PM_BOOT_CONFIG_TZ,
};
#ifdef CONFIG_I2C
#define I2C_SURF 1
#define I2C_FFA (1 << 1)
#define I2C_RUMI (1 << 2)
#define I2C_SIM (1 << 3)
#define I2C_FLUID (1 << 4)
#define I2C_LIQUID (1 << 5)
struct i2c_registry {
u8 machs;
int bus;
struct i2c_board_info *info;
int len;
};
#ifdef CONFIG_INPUT_MPU3050
#define MPU3050_INT_GPIO 69
static struct mpu3050_gyro_platform_data mpu3050_gyro = {
.gpio_int = MPU3050_INT_GPIO,
};
static struct i2c_board_info __initdata mpu3050_i2c_boardinfo[] = {
{
I2C_BOARD_INFO("mpu3050", 0x68),
.irq = MSM_GPIO_TO_INT(MPU3050_INT_GPIO),
.platform_data = &mpu3050_gyro,
},
};
#endif
#ifdef CONFIG_ISL9519_CHARGER
static struct isl_platform_data isl_data __initdata = {
.valid_n_gpio = 0, /* Not required when notify-by-pmic */
.chg_detection_config = NULL, /* Not required when notify-by-pmic */
.max_system_voltage = 4200,
.min_system_voltage = 3200,
.chgcurrent = 1000, /* 1900, */
.term_current = 400, /* Need fine tuning */
.input_current = 2048,
};
static struct i2c_board_info isl_charger_i2c_info[] __initdata = {
{
I2C_BOARD_INFO("isl9519q", 0x9),
.irq = 0, /* Not required when notify-by-pmic */
.platform_data = &isl_data,
},
};
#endif /* CONFIG_ISL9519_CHARGER */
#ifdef CONFIG_STM_LIS3DH
static struct lis3dh_acc_platform_data lis3dh_accel = {
.poll_interval = 200,
.min_interval = 10,
.g_range = LIS3DH_ACC_G_2G,
.axis_map_x = 1,
.axis_map_y = 0,
.axis_map_z = 2,
.negate_x = 0,
.negate_y = 0,
.negate_z = 1,
.init = NULL,
.exit = NULL,
.gpio_int1 = -EINVAL,
.gpio_int2 = -EINVAL,
};
static struct i2c_board_info __initdata lis3dh_i2c_boardinfo[] = {
{
I2C_BOARD_INFO(LIS3DH_ACC_DEV_NAME, 0x18),
.platform_data = &lis3dh_accel,
},
};
#endif /* CONFIG_STM_LIS3DH */
static struct i2c_registry msm8960_i2c_devices[] __initdata = {
#ifdef CONFIG_ISL9519_CHARGER
{
I2C_LIQUID,
MSM_8930_GSBI10_QUP_I2C_BUS_ID,
isl_charger_i2c_info,
ARRAY_SIZE(isl_charger_i2c_info),
},
#endif /* CONFIG_ISL9519_CHARGER */
#ifdef CONFIG_INPUT_MPU3050
{
I2C_FFA | I2C_FLUID,
MSM_8930_GSBI12_QUP_I2C_BUS_ID,
mpu3050_i2c_boardinfo,
ARRAY_SIZE(mpu3050_i2c_boardinfo),
},
#endif
{
I2C_SURF | I2C_FFA | I2C_FLUID,
MSM_8930_GSBI9_QUP_I2C_BUS_ID,
msm_isa1200_board_info,
ARRAY_SIZE(msm_isa1200_board_info),
},
{
I2C_SURF | I2C_FFA | I2C_FLUID,
MSM_8930_GSBI3_QUP_I2C_BUS_ID,
mxt_device_info_8930,
ARRAY_SIZE(mxt_device_info_8930),
},
{
I2C_SURF | I2C_FFA | I2C_LIQUID | I2C_FLUID,
MSM_8930_GSBI9_QUP_I2C_BUS_ID,
sii_device_info,
ARRAY_SIZE(sii_device_info),
},
#ifdef CONFIG_STM_LIS3DH
{
I2C_FFA | I2C_FLUID,
MSM_8930_GSBI12_QUP_I2C_BUS_ID,
lis3dh_i2c_boardinfo,
ARRAY_SIZE(lis3dh_i2c_boardinfo),
},
#endif
};
#endif /* CONFIG_I2C */
static void __init register_i2c_devices(void)
{
#ifdef CONFIG_I2C
u8 mach_mask = 0;
int i;
#ifdef CONFIG_MSM_CAMERA
struct i2c_registry msm8930_camera_i2c_devices = {
I2C_SURF | I2C_FFA | I2C_FLUID | I2C_LIQUID | I2C_RUMI,
MSM_8930_GSBI4_QUP_I2C_BUS_ID,
msm8930_camera_board_info.board_info,
msm8930_camera_board_info.num_i2c_board_info,
};
#endif
/* Build the matching 'supported_machs' bitmask */
if (machine_is_msm8930_cdp() || machine_is_msm8627_cdp())
mach_mask = I2C_SURF;
else if (machine_is_msm8930_fluid())
mach_mask = I2C_FLUID;
else if (machine_is_msm8930_mtp() || machine_is_msm8627_mtp())
mach_mask = I2C_FFA;
else
pr_err("unmatched machine ID in register_i2c_devices\n");
/* Run the array and install devices as appropriate */
for (i = 0; i < ARRAY_SIZE(msm8960_i2c_devices); ++i) {
if (msm8960_i2c_devices[i].machs & mach_mask)
i2c_register_board_info(msm8960_i2c_devices[i].bus,
msm8960_i2c_devices[i].info,
msm8960_i2c_devices[i].len);
}
#ifdef CONFIG_MSM_CAMERA
if (msm8930_camera_i2c_devices.machs & mach_mask)
i2c_register_board_info(msm8930_camera_i2c_devices.bus,
msm8930_camera_i2c_devices.info,
msm8930_camera_i2c_devices.len);
#endif
#endif
}
/*Modify the WCD9xxx platform data to support supplies from PM8917 */
static void __init msm8930_pm8917_wcd9xxx_pdata_fixup(
struct wcd9xxx_pdata *cdc_pdata)
{
int i;
for (i = 0; i < ARRAY_SIZE(cdc_pdata->regulator); i++) {
if (cdc_pdata->regulator[i].name != NULL
&& strncmp(cdc_pdata->regulator[i].name,
"CDC_VDD_CP", 10) == 0) {
cdc_pdata->regulator[i].min_uV =
cdc_pdata->regulator[i].max_uV = 1800000;
pr_info("%s: CDC_VDD_CP forced to 1.8 volts for PM8917\n",
__func__);
return;
}
}
}
/* Modify platform data values to match requirements for PM8917. */
static void __init msm8930_pm8917_pdata_fixup(void)
{
struct acpuclk_platform_data *pdata;
msm8930_pm8917_wcd9xxx_pdata_fixup(&sitar_platform_data);
msm8930_pm8917_wcd9xxx_pdata_fixup(&sitar1p1_platform_data);
mhl_platform_data.gpio_mhl_power = MHL_POWER_GPIO_PM8917;
gpio_keys_8930_pdata.buttons = keys_8930_pm8917;
gpio_keys_8930_pdata.nbuttons = ARRAY_SIZE(keys_8930_pm8917);
msm_device_saw_core0.dev.platform_data
= &msm8930_pm8038_saw_regulator_core0_pdata;
msm_device_saw_core1.dev.platform_data
= &msm8930_pm8038_saw_regulator_core1_pdata;
msm8930_device_rpm_regulator.dev.platform_data
= &msm8930_pm8917_rpm_regulator_pdata;
pdata = msm8930_device_acpuclk.dev.platform_data;
pdata->uses_pm8917 = true;
pdata = msm8930ab_device_acpuclk.dev.platform_data;
pdata->uses_pm8917 = true;
}
static void __init msm8930ab_update_retention_spm(void)
{
int i;
/* Update the SPM sequences for krait retention on all cores */
for (i = 0; i < ARRAY_SIZE(msm_spm_data); i++) {
int j;
struct msm_spm_platform_data *pdata = &msm_spm_data[i];
for (j = 0; j < pdata->num_modes; j++) {
if (pdata->modes[j].cmd ==
spm_retention_cmd_sequence)
pdata->modes[j].cmd =
spm_retention_with_krait_v3_cmd_sequence;
}
}
}
static void __init msm8930_cdp_init(void)
{
if (socinfo_get_pmic_model() == PMIC_MODEL_PM8917)
msm8930_pm8917_pdata_fixup();
if (meminfo_init(SYS_MEMORY, SZ_256M) < 0)
pr_err("meminfo_init() failed!\n");
platform_device_register(&msm_gpio_device);
msm_tsens_early_init(&msm_tsens_pdata);
msm_thermal_init(&msm_thermal_pdata);
if (socinfo_get_pmic_model() != PMIC_MODEL_PM8917) {
BUG_ON(msm_rpm_init(&msm8930_rpm_data));
BUG_ON(msm_rpmrs_levels_init(&msm_rpmrs_data));
} else {
BUG_ON(msm_rpm_init(&msm8930_rpm_data_pm8917));
BUG_ON(msm_rpmrs_levels_init(&msm_rpmrs_data_pm8917));
}
regulator_suppress_info_printing();
if (msm_xo_init())
pr_err("Failed to initialize XO votes\n");
platform_device_register(&msm8930_device_rpm_regulator);
if (socinfo_get_pmic_model() == PMIC_MODEL_PM8917)
msm_clock_init(&msm8930_pm8917_clock_init_data);
else
msm_clock_init(&msm8930_clock_init_data);
if (socinfo_get_pmic_model() == PMIC_MODEL_PM8917) {
/*
* By default, set USB mode as USB Peripheral only due to
* hardware rework requirement for USB Host Mode.
* Provide pmic_id_irq number only if host mode is enable
* by user assuming that hardware rework is available.
*/
if (enable_usb_host_mode) {
/* MPP01 IRQ number */
msm_otg_pdata.pmic_id_irq =
PM8921_MPP_IRQ(PM8917_IRQ_BASE, 1);
} else {
pr_err("Enabling USB Peripheral Only mode.\n");
msm_otg_pdata.mode = USB_PERIPHERAL;
}
} else {
msm_otg_pdata.pmic_id_irq =
PM8038_USB_ID_IN_IRQ(PM8038_IRQ_BASE);
}
msm_otg_pdata.phy_init_seq = hsusb_phy_init_seq;
if (msm8930_mhl_display_enabled()) {
mhl_platform_data.mhl_enabled = true;
msm_otg_pdata.mhl_enable = true;
}
msm8960_device_otg.dev.platform_data = &msm_otg_pdata;
android_usb_pdata.swfi_latency =
msm_rpmrs_levels[0].latency_us;
msm8930_init_gpiomux();
msm8960_device_qup_spi_gsbi1.dev.platform_data =
&msm8960_qup_spi_gsbi1_pdata;
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
/*
* TODO: When physical 8930/PM8038 hardware becomes
* available, remove this block or add the config
* option.
*/
#ifndef MSM8930_PHASE_2
msm8960_init_pmic();
#else
msm8930_init_pmic();
#endif
msm8930_i2c_init();
msm8930_init_gpu();
if (cpu_is_krait_v3()) {
msm_pm_set_tz_retention_flag(0);
msm8930ab_update_retention_spm();
} else {
msm_pm_set_tz_retention_flag(1);
}
msm_spm_init(msm_spm_data, ARRAY_SIZE(msm_spm_data));
msm_spm_l2_init(msm_spm_l2_data);
msm8930_init_buses();
if (cpu_is_msm8627()) {
platform_add_devices(msm8627_footswitch,
msm8627_num_footswitch);
} else {
if (socinfo_get_pmic_model() == PMIC_MODEL_PM8917)
platform_add_devices(msm8930_pm8917_footswitch,
msm8930_pm8917_num_footswitch);
else
platform_add_devices(msm8930_footswitch,
msm8930_num_footswitch);
}
if (cpu_is_msm8627())
platform_device_register(&msm8627_device_acpuclk);
else if (cpu_is_msm8930())
platform_device_register(&msm8930_device_acpuclk);
else if (cpu_is_msm8930aa())
platform_device_register(&msm8930aa_device_acpuclk);
else if (cpu_is_msm8930ab())
platform_device_register(&msm8930ab_device_acpuclk);
platform_add_devices(early_common_devices,
ARRAY_SIZE(early_common_devices));
if (socinfo_get_pmic_model() != PMIC_MODEL_PM8917)
platform_add_devices(pmic_pm8038_devices,
ARRAY_SIZE(pmic_pm8038_devices));
else
platform_add_devices(pmic_pm8917_devices,
ARRAY_SIZE(pmic_pm8917_devices));
platform_add_devices(common_devices, ARRAY_SIZE(common_devices));
msm8930_add_vidc_device();
/*
* TODO: When physical 8930/PM8038 hardware becomes
* available, remove this block or add the config
* option.
*/
#ifndef MSM8930_PHASE_2
msm8960_pm8921_gpio_mpp_init();
#else
if (socinfo_get_pmic_model() != PMIC_MODEL_PM8917)
msm8930_pm8038_gpio_mpp_init();
else
msm8930_pm8917_gpio_mpp_init();
#endif
/* Don't add modem devices on APQ targets */
if (socinfo_get_id() != 119 && socinfo_get_id() != 157
&& socinfo_get_id() != 160)
platform_device_register(&msm_8960_q6_mss);
platform_add_devices(cdp_devices, ARRAY_SIZE(cdp_devices));
#ifdef CONFIG_MSM_CAMERA
msm8930_init_cam();
#endif
msm8930_init_mmc();
mxt_init_vkeys_8930();
register_i2c_devices();
msm8930_init_fb();
slim_register_board_info(msm_slim_devices,
ARRAY_SIZE(msm_slim_devices));
change_memory_power = &msm8930_change_memory_power;
BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata));
if (PLATFORM_IS_CHARM25())
platform_add_devices(mdm_devices, ARRAY_SIZE(mdm_devices));
}
MACHINE_START(MSM8930_CDP, "QCT MSM8930 CDP")
.map_io = msm8930_map_io,
.reserve = msm8930_reserve,
.init_irq = msm8930_init_irq,
.handle_irq = gic_handle_irq,
.timer = &msm_timer,
.init_machine = msm8930_cdp_init,
.init_early = msm8930_allocate_memory_regions,
.init_very_early = msm8930_early_memory,
.restart = msm_restart,
.smp = &msm8960_smp_ops,
MACHINE_END
MACHINE_START(MSM8930_MTP, "QCT MSM8930 MTP")
.map_io = msm8930_map_io,
.reserve = msm8930_reserve,
.init_irq = msm8930_init_irq,
.handle_irq = gic_handle_irq,
.timer = &msm_timer,
.init_machine = msm8930_cdp_init,
.init_early = msm8930_allocate_memory_regions,
.init_very_early = msm8930_early_memory,
.restart = msm_restart,
.smp = &msm8960_smp_ops,
MACHINE_END
MACHINE_START(MSM8930_FLUID, "QCT MSM8930 FLUID")
.map_io = msm8930_map_io,
.reserve = msm8930_reserve,
.init_irq = msm8930_init_irq,
.handle_irq = gic_handle_irq,
.timer = &msm_timer,
.init_machine = msm8930_cdp_init,
.init_early = msm8930_allocate_memory_regions,
.init_very_early = msm8930_early_memory,
.restart = msm_restart,
.smp = &msm8960_smp_ops,
MACHINE_END
MACHINE_START(MSM8627_CDP, "QCT MSM8627 CDP")
.map_io = msm8930_map_io,
.reserve = msm8930_reserve,
.init_irq = msm8930_init_irq,
.handle_irq = gic_handle_irq,
.timer = &msm_timer,
.init_machine = msm8930_cdp_init,
.init_early = msm8930_allocate_memory_regions,
.init_very_early = msm8930_early_memory,
.restart = msm_restart,
.smp = &msm8960_smp_ops,
MACHINE_END
MACHINE_START(MSM8627_MTP, "QCT MSM8627 MTP")
.map_io = msm8930_map_io,
.reserve = msm8930_reserve,
.init_irq = msm8930_init_irq,
.handle_irq = gic_handle_irq,
.timer = &msm_timer,
.init_machine = msm8930_cdp_init,
.init_early = msm8930_allocate_memory_regions,
.init_very_early = msm8930_early_memory,
.restart = msm_restart,
.smp = &msm8960_smp_ops,
MACHINE_END