| /* -*- linux-c -*- |
| * drivers/char/viotape.c |
| * |
| * iSeries Virtual Tape |
| * |
| * Authors: Dave Boutcher <boutcher@us.ibm.com> |
| * Ryan Arnold <ryanarn@us.ibm.com> |
| * Colin Devilbiss <devilbis@us.ibm.com> |
| * Stephen Rothwell <sfr@au1.ibm.com> |
| * |
| * (C) Copyright 2000-2004 IBM Corporation |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) anyu later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * This routine provides access to tape drives owned and managed by an OS/400 |
| * partition running on the same box as this Linux partition. |
| * |
| * All tape operations are performed by sending messages back and forth to |
| * the OS/400 partition. The format of the messages is defined in |
| * iseries/vio.h |
| */ |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/wait.h> |
| #include <linux/spinlock.h> |
| #include <linux/mtio.h> |
| #include <linux/device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/fs.h> |
| #include <linux/cdev.h> |
| #include <linux/major.h> |
| #include <linux/completion.h> |
| #include <linux/proc_fs.h> |
| #include <linux/seq_file.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/ioctls.h> |
| |
| #include <asm/vio.h> |
| #include <asm/iseries/vio.h> |
| #include <asm/iseries/hv_lp_event.h> |
| #include <asm/iseries/hv_call_event.h> |
| #include <asm/iseries/hv_lp_config.h> |
| |
| #define VIOTAPE_VERSION "1.2" |
| #define VIOTAPE_MAXREQ 1 |
| |
| #define VIOTAPE_KERN_WARN KERN_WARNING "viotape: " |
| #define VIOTAPE_KERN_INFO KERN_INFO "viotape: " |
| |
| static int viotape_numdev; |
| |
| /* |
| * The minor number follows the conventions of the SCSI tape drives. The |
| * rewind and mode are encoded in the minor #. We use this struct to break |
| * them out |
| */ |
| struct viot_devinfo_struct { |
| int devno; |
| int mode; |
| int rewind; |
| }; |
| |
| #define VIOTAPOP_RESET 0 |
| #define VIOTAPOP_FSF 1 |
| #define VIOTAPOP_BSF 2 |
| #define VIOTAPOP_FSR 3 |
| #define VIOTAPOP_BSR 4 |
| #define VIOTAPOP_WEOF 5 |
| #define VIOTAPOP_REW 6 |
| #define VIOTAPOP_NOP 7 |
| #define VIOTAPOP_EOM 8 |
| #define VIOTAPOP_ERASE 9 |
| #define VIOTAPOP_SETBLK 10 |
| #define VIOTAPOP_SETDENSITY 11 |
| #define VIOTAPOP_SETPOS 12 |
| #define VIOTAPOP_GETPOS 13 |
| #define VIOTAPOP_SETPART 14 |
| #define VIOTAPOP_UNLOAD 15 |
| |
| struct viotapelpevent { |
| struct HvLpEvent event; |
| u32 reserved; |
| u16 version; |
| u16 sub_type_result; |
| u16 tape; |
| u16 flags; |
| u32 token; |
| u64 len; |
| union { |
| struct { |
| u32 tape_op; |
| u32 count; |
| } op; |
| struct { |
| u32 type; |
| u32 resid; |
| u32 dsreg; |
| u32 gstat; |
| u32 erreg; |
| u32 file_no; |
| u32 block_no; |
| } get_status; |
| struct { |
| u32 block_no; |
| } get_pos; |
| } u; |
| }; |
| |
| enum viotapesubtype { |
| viotapeopen = 0x0001, |
| viotapeclose = 0x0002, |
| viotaperead = 0x0003, |
| viotapewrite = 0x0004, |
| viotapegetinfo = 0x0005, |
| viotapeop = 0x0006, |
| viotapegetpos = 0x0007, |
| viotapesetpos = 0x0008, |
| viotapegetstatus = 0x0009 |
| }; |
| |
| enum viotaperc { |
| viotape_InvalidRange = 0x0601, |
| viotape_InvalidToken = 0x0602, |
| viotape_DMAError = 0x0603, |
| viotape_UseError = 0x0604, |
| viotape_ReleaseError = 0x0605, |
| viotape_InvalidTape = 0x0606, |
| viotape_InvalidOp = 0x0607, |
| viotape_TapeErr = 0x0608, |
| |
| viotape_AllocTimedOut = 0x0640, |
| viotape_BOTEnc = 0x0641, |
| viotape_BlankTape = 0x0642, |
| viotape_BufferEmpty = 0x0643, |
| viotape_CleanCartFound = 0x0644, |
| viotape_CmdNotAllowed = 0x0645, |
| viotape_CmdNotSupported = 0x0646, |
| viotape_DataCheck = 0x0647, |
| viotape_DecompressErr = 0x0648, |
| viotape_DeviceTimeout = 0x0649, |
| viotape_DeviceUnavail = 0x064a, |
| viotape_DeviceBusy = 0x064b, |
| viotape_EndOfMedia = 0x064c, |
| viotape_EndOfTape = 0x064d, |
| viotape_EquipCheck = 0x064e, |
| viotape_InsufficientRs = 0x064f, |
| viotape_InvalidLogBlk = 0x0650, |
| viotape_LengthError = 0x0651, |
| viotape_LibDoorOpen = 0x0652, |
| viotape_LoadFailure = 0x0653, |
| viotape_NotCapable = 0x0654, |
| viotape_NotOperational = 0x0655, |
| viotape_NotReady = 0x0656, |
| viotape_OpCancelled = 0x0657, |
| viotape_PhyLinkErr = 0x0658, |
| viotape_RdyNotBOT = 0x0659, |
| viotape_TapeMark = 0x065a, |
| viotape_WriteProt = 0x065b |
| }; |
| |
| static const struct vio_error_entry viotape_err_table[] = { |
| { viotape_InvalidRange, EIO, "Internal error" }, |
| { viotape_InvalidToken, EIO, "Internal error" }, |
| { viotape_DMAError, EIO, "DMA error" }, |
| { viotape_UseError, EIO, "Internal error" }, |
| { viotape_ReleaseError, EIO, "Internal error" }, |
| { viotape_InvalidTape, EIO, "Invalid tape device" }, |
| { viotape_InvalidOp, EIO, "Invalid operation" }, |
| { viotape_TapeErr, EIO, "Tape error" }, |
| { viotape_AllocTimedOut, EBUSY, "Allocate timed out" }, |
| { viotape_BOTEnc, EIO, "Beginning of tape encountered" }, |
| { viotape_BlankTape, EIO, "Blank tape" }, |
| { viotape_BufferEmpty, EIO, "Buffer empty" }, |
| { viotape_CleanCartFound, ENOMEDIUM, "Cleaning cartridge found" }, |
| { viotape_CmdNotAllowed, EIO, "Command not allowed" }, |
| { viotape_CmdNotSupported, EIO, "Command not supported" }, |
| { viotape_DataCheck, EIO, "Data check" }, |
| { viotape_DecompressErr, EIO, "Decompression error" }, |
| { viotape_DeviceTimeout, EBUSY, "Device timeout" }, |
| { viotape_DeviceUnavail, EIO, "Device unavailable" }, |
| { viotape_DeviceBusy, EBUSY, "Device busy" }, |
| { viotape_EndOfMedia, ENOSPC, "End of media" }, |
| { viotape_EndOfTape, ENOSPC, "End of tape" }, |
| { viotape_EquipCheck, EIO, "Equipment check" }, |
| { viotape_InsufficientRs, EOVERFLOW, "Insufficient tape resources" }, |
| { viotape_InvalidLogBlk, EIO, "Invalid logical block location" }, |
| { viotape_LengthError, EOVERFLOW, "Length error" }, |
| { viotape_LibDoorOpen, EBUSY, "Door open" }, |
| { viotape_LoadFailure, ENOMEDIUM, "Load failure" }, |
| { viotape_NotCapable, EIO, "Not capable" }, |
| { viotape_NotOperational, EIO, "Not operational" }, |
| { viotape_NotReady, EIO, "Not ready" }, |
| { viotape_OpCancelled, EIO, "Operation cancelled" }, |
| { viotape_PhyLinkErr, EIO, "Physical link error" }, |
| { viotape_RdyNotBOT, EIO, "Ready but not beginning of tape" }, |
| { viotape_TapeMark, EIO, "Tape mark" }, |
| { viotape_WriteProt, EROFS, "Write protection error" }, |
| { 0, 0, NULL }, |
| }; |
| |
| /* Maximum number of tapes we support */ |
| #define VIOTAPE_MAX_TAPE HVMAXARCHITECTEDVIRTUALTAPES |
| #define MAX_PARTITIONS 4 |
| |
| /* defines for current tape state */ |
| #define VIOT_IDLE 0 |
| #define VIOT_READING 1 |
| #define VIOT_WRITING 2 |
| |
| /* Our info on the tapes */ |
| struct tape_descr { |
| char rsrcname[10]; |
| char type[4]; |
| char model[3]; |
| }; |
| |
| static struct tape_descr *viotape_unitinfo; |
| static dma_addr_t viotape_unitinfo_token; |
| |
| static struct mtget viomtget[VIOTAPE_MAX_TAPE]; |
| |
| static struct class *tape_class; |
| |
| static struct device *tape_device[VIOTAPE_MAX_TAPE]; |
| |
| /* |
| * maintain the current state of each tape (and partition) |
| * so that we know when to write EOF marks. |
| */ |
| static struct { |
| unsigned char cur_part; |
| unsigned char part_stat_rwi[MAX_PARTITIONS]; |
| } state[VIOTAPE_MAX_TAPE]; |
| |
| /* We single-thread */ |
| static struct semaphore reqSem; |
| |
| /* |
| * When we send a request, we use this struct to get the response back |
| * from the interrupt handler |
| */ |
| struct op_struct { |
| void *buffer; |
| dma_addr_t dmaaddr; |
| size_t count; |
| int rc; |
| int non_blocking; |
| struct completion com; |
| struct device *dev; |
| struct op_struct *next; |
| }; |
| |
| static spinlock_t op_struct_list_lock; |
| static struct op_struct *op_struct_list; |
| |
| /* forward declaration to resolve interdependence */ |
| static int chg_state(int index, unsigned char new_state, struct file *file); |
| |
| /* procfs support */ |
| static int proc_viotape_show(struct seq_file *m, void *v) |
| { |
| int i; |
| |
| seq_printf(m, "viotape driver version " VIOTAPE_VERSION "\n"); |
| for (i = 0; i < viotape_numdev; i++) { |
| seq_printf(m, "viotape device %d is iSeries resource %10.10s" |
| "type %4.4s, model %3.3s\n", |
| i, viotape_unitinfo[i].rsrcname, |
| viotape_unitinfo[i].type, |
| viotape_unitinfo[i].model); |
| } |
| return 0; |
| } |
| |
| static int proc_viotape_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, proc_viotape_show, NULL); |
| } |
| |
| static const struct file_operations proc_viotape_operations = { |
| .open = proc_viotape_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| /* Decode the device minor number into its parts */ |
| void get_dev_info(struct inode *ino, struct viot_devinfo_struct *devi) |
| { |
| devi->devno = iminor(ino) & 0x1F; |
| devi->mode = (iminor(ino) & 0x60) >> 5; |
| /* if bit is set in the minor, do _not_ rewind automatically */ |
| devi->rewind = (iminor(ino) & 0x80) == 0; |
| } |
| |
| /* This is called only from the exit and init paths, so no need for locking */ |
| static void clear_op_struct_pool(void) |
| { |
| while (op_struct_list) { |
| struct op_struct *toFree = op_struct_list; |
| op_struct_list = op_struct_list->next; |
| kfree(toFree); |
| } |
| } |
| |
| /* Likewise, this is only called from the init path */ |
| static int add_op_structs(int structs) |
| { |
| int i; |
| |
| for (i = 0; i < structs; ++i) { |
| struct op_struct *new_struct = |
| kmalloc(sizeof(*new_struct), GFP_KERNEL); |
| if (!new_struct) { |
| clear_op_struct_pool(); |
| return -ENOMEM; |
| } |
| new_struct->next = op_struct_list; |
| op_struct_list = new_struct; |
| } |
| return 0; |
| } |
| |
| /* Allocate an op structure from our pool */ |
| static struct op_struct *get_op_struct(void) |
| { |
| struct op_struct *retval; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&op_struct_list_lock, flags); |
| retval = op_struct_list; |
| if (retval) |
| op_struct_list = retval->next; |
| spin_unlock_irqrestore(&op_struct_list_lock, flags); |
| if (retval) { |
| memset(retval, 0, sizeof(*retval)); |
| init_completion(&retval->com); |
| } |
| |
| return retval; |
| } |
| |
| /* Return an op structure to our pool */ |
| static void free_op_struct(struct op_struct *op_struct) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&op_struct_list_lock, flags); |
| op_struct->next = op_struct_list; |
| op_struct_list = op_struct; |
| spin_unlock_irqrestore(&op_struct_list_lock, flags); |
| } |
| |
| /* Map our tape return codes to errno values */ |
| int tape_rc_to_errno(int tape_rc, char *operation, int tapeno) |
| { |
| const struct vio_error_entry *err; |
| |
| if (tape_rc == 0) |
| return 0; |
| |
| err = vio_lookup_rc(viotape_err_table, tape_rc); |
| printk(VIOTAPE_KERN_WARN "error(%s) 0x%04x on Device %d (%-10s): %s\n", |
| operation, tape_rc, tapeno, |
| viotape_unitinfo[tapeno].rsrcname, err->msg); |
| return -err->errno; |
| } |
| |
| /* Get info on all tapes from OS/400 */ |
| static int get_viotape_info(void) |
| { |
| HvLpEvent_Rc hvrc; |
| int i; |
| size_t len = sizeof(*viotape_unitinfo) * VIOTAPE_MAX_TAPE; |
| struct op_struct *op = get_op_struct(); |
| |
| if (op == NULL) |
| return -ENOMEM; |
| |
| viotape_unitinfo = dma_alloc_coherent(iSeries_vio_dev, len, |
| &viotape_unitinfo_token, GFP_ATOMIC); |
| if (viotape_unitinfo == NULL) { |
| free_op_struct(op); |
| return -ENOMEM; |
| } |
| |
| memset(viotape_unitinfo, 0, len); |
| |
| hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, |
| HvLpEvent_Type_VirtualIo, |
| viomajorsubtype_tape | viotapegetinfo, |
| HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, |
| viopath_sourceinst(viopath_hostLp), |
| viopath_targetinst(viopath_hostLp), |
| (u64) (unsigned long) op, VIOVERSION << 16, |
| viotape_unitinfo_token, len, 0, 0); |
| if (hvrc != HvLpEvent_Rc_Good) { |
| printk(VIOTAPE_KERN_WARN "hv error on op %d\n", |
| (int)hvrc); |
| free_op_struct(op); |
| return -EIO; |
| } |
| |
| wait_for_completion(&op->com); |
| |
| free_op_struct(op); |
| |
| for (i = 0; |
| ((i < VIOTAPE_MAX_TAPE) && (viotape_unitinfo[i].rsrcname[0])); |
| i++) |
| viotape_numdev++; |
| return 0; |
| } |
| |
| |
| /* Write */ |
| static ssize_t viotap_write(struct file *file, const char *buf, |
| size_t count, loff_t * ppos) |
| { |
| HvLpEvent_Rc hvrc; |
| unsigned short flags = file->f_flags; |
| int noblock = ((flags & O_NONBLOCK) != 0); |
| ssize_t ret; |
| struct viot_devinfo_struct devi; |
| struct op_struct *op = get_op_struct(); |
| |
| if (op == NULL) |
| return -ENOMEM; |
| |
| get_dev_info(file->f_dentry->d_inode, &devi); |
| |
| /* |
| * We need to make sure we can send a request. We use |
| * a semaphore to keep track of # requests in use. If |
| * we are non-blocking, make sure we don't block on the |
| * semaphore |
| */ |
| if (noblock) { |
| if (down_trylock(&reqSem)) { |
| ret = -EWOULDBLOCK; |
| goto free_op; |
| } |
| } else |
| down(&reqSem); |
| |
| /* Allocate a DMA buffer */ |
| op->dev = tape_device[devi.devno]; |
| op->buffer = dma_alloc_coherent(op->dev, count, &op->dmaaddr, |
| GFP_ATOMIC); |
| |
| if (op->buffer == NULL) { |
| printk(VIOTAPE_KERN_WARN |
| "error allocating dma buffer for len %ld\n", |
| count); |
| ret = -EFAULT; |
| goto up_sem; |
| } |
| |
| /* Copy the data into the buffer */ |
| if (copy_from_user(op->buffer, buf, count)) { |
| printk(VIOTAPE_KERN_WARN "tape: error on copy from user\n"); |
| ret = -EFAULT; |
| goto free_dma; |
| } |
| |
| op->non_blocking = noblock; |
| init_completion(&op->com); |
| op->count = count; |
| |
| hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, |
| HvLpEvent_Type_VirtualIo, |
| viomajorsubtype_tape | viotapewrite, |
| HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, |
| viopath_sourceinst(viopath_hostLp), |
| viopath_targetinst(viopath_hostLp), |
| (u64)(unsigned long)op, VIOVERSION << 16, |
| ((u64)devi.devno << 48) | op->dmaaddr, count, 0, 0); |
| if (hvrc != HvLpEvent_Rc_Good) { |
| printk(VIOTAPE_KERN_WARN "hv error on op %d\n", |
| (int)hvrc); |
| ret = -EIO; |
| goto free_dma; |
| } |
| |
| if (noblock) |
| return count; |
| |
| wait_for_completion(&op->com); |
| |
| if (op->rc) |
| ret = tape_rc_to_errno(op->rc, "write", devi.devno); |
| else { |
| chg_state(devi.devno, VIOT_WRITING, file); |
| ret = op->count; |
| } |
| |
| free_dma: |
| dma_free_coherent(op->dev, count, op->buffer, op->dmaaddr); |
| up_sem: |
| up(&reqSem); |
| free_op: |
| free_op_struct(op); |
| return ret; |
| } |
| |
| /* read */ |
| static ssize_t viotap_read(struct file *file, char *buf, size_t count, |
| loff_t *ptr) |
| { |
| HvLpEvent_Rc hvrc; |
| unsigned short flags = file->f_flags; |
| struct op_struct *op = get_op_struct(); |
| int noblock = ((flags & O_NONBLOCK) != 0); |
| ssize_t ret; |
| struct viot_devinfo_struct devi; |
| |
| if (op == NULL) |
| return -ENOMEM; |
| |
| get_dev_info(file->f_dentry->d_inode, &devi); |
| |
| /* |
| * We need to make sure we can send a request. We use |
| * a semaphore to keep track of # requests in use. If |
| * we are non-blocking, make sure we don't block on the |
| * semaphore |
| */ |
| if (noblock) { |
| if (down_trylock(&reqSem)) { |
| ret = -EWOULDBLOCK; |
| goto free_op; |
| } |
| } else |
| down(&reqSem); |
| |
| chg_state(devi.devno, VIOT_READING, file); |
| |
| /* Allocate a DMA buffer */ |
| op->dev = tape_device[devi.devno]; |
| op->buffer = dma_alloc_coherent(op->dev, count, &op->dmaaddr, |
| GFP_ATOMIC); |
| if (op->buffer == NULL) { |
| ret = -EFAULT; |
| goto up_sem; |
| } |
| |
| op->count = count; |
| init_completion(&op->com); |
| |
| hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, |
| HvLpEvent_Type_VirtualIo, |
| viomajorsubtype_tape | viotaperead, |
| HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, |
| viopath_sourceinst(viopath_hostLp), |
| viopath_targetinst(viopath_hostLp), |
| (u64)(unsigned long)op, VIOVERSION << 16, |
| ((u64)devi.devno << 48) | op->dmaaddr, count, 0, 0); |
| if (hvrc != HvLpEvent_Rc_Good) { |
| printk(VIOTAPE_KERN_WARN "tape hv error on op %d\n", |
| (int)hvrc); |
| ret = -EIO; |
| goto free_dma; |
| } |
| |
| wait_for_completion(&op->com); |
| |
| if (op->rc) |
| ret = tape_rc_to_errno(op->rc, "read", devi.devno); |
| else { |
| ret = op->count; |
| if (ret && copy_to_user(buf, op->buffer, ret)) { |
| printk(VIOTAPE_KERN_WARN "error on copy_to_user\n"); |
| ret = -EFAULT; |
| } |
| } |
| |
| free_dma: |
| dma_free_coherent(op->dev, count, op->buffer, op->dmaaddr); |
| up_sem: |
| up(&reqSem); |
| free_op: |
| free_op_struct(op); |
| return ret; |
| } |
| |
| /* ioctl */ |
| static int viotap_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| HvLpEvent_Rc hvrc; |
| int ret; |
| struct viot_devinfo_struct devi; |
| struct mtop mtc; |
| u32 myOp; |
| struct op_struct *op = get_op_struct(); |
| |
| if (op == NULL) |
| return -ENOMEM; |
| |
| get_dev_info(file->f_dentry->d_inode, &devi); |
| |
| down(&reqSem); |
| |
| ret = -EINVAL; |
| |
| switch (cmd) { |
| case MTIOCTOP: |
| ret = -EFAULT; |
| /* |
| * inode is null if and only if we (the kernel) |
| * made the request |
| */ |
| if (inode == NULL) |
| memcpy(&mtc, (void *) arg, sizeof(struct mtop)); |
| else if (copy_from_user((char *)&mtc, (char *)arg, |
| sizeof(struct mtop))) |
| goto free_op; |
| |
| ret = -EIO; |
| switch (mtc.mt_op) { |
| case MTRESET: |
| myOp = VIOTAPOP_RESET; |
| break; |
| case MTFSF: |
| myOp = VIOTAPOP_FSF; |
| break; |
| case MTBSF: |
| myOp = VIOTAPOP_BSF; |
| break; |
| case MTFSR: |
| myOp = VIOTAPOP_FSR; |
| break; |
| case MTBSR: |
| myOp = VIOTAPOP_BSR; |
| break; |
| case MTWEOF: |
| myOp = VIOTAPOP_WEOF; |
| break; |
| case MTREW: |
| myOp = VIOTAPOP_REW; |
| break; |
| case MTNOP: |
| myOp = VIOTAPOP_NOP; |
| break; |
| case MTEOM: |
| myOp = VIOTAPOP_EOM; |
| break; |
| case MTERASE: |
| myOp = VIOTAPOP_ERASE; |
| break; |
| case MTSETBLK: |
| myOp = VIOTAPOP_SETBLK; |
| break; |
| case MTSETDENSITY: |
| myOp = VIOTAPOP_SETDENSITY; |
| break; |
| case MTTELL: |
| myOp = VIOTAPOP_GETPOS; |
| break; |
| case MTSEEK: |
| myOp = VIOTAPOP_SETPOS; |
| break; |
| case MTSETPART: |
| myOp = VIOTAPOP_SETPART; |
| break; |
| case MTOFFL: |
| myOp = VIOTAPOP_UNLOAD; |
| break; |
| default: |
| printk(VIOTAPE_KERN_WARN "MTIOCTOP called " |
| "with invalid op 0x%x\n", mtc.mt_op); |
| goto free_op; |
| } |
| |
| /* |
| * if we moved the head, we are no longer |
| * reading or writing |
| */ |
| switch (mtc.mt_op) { |
| case MTFSF: |
| case MTBSF: |
| case MTFSR: |
| case MTBSR: |
| case MTTELL: |
| case MTSEEK: |
| case MTREW: |
| chg_state(devi.devno, VIOT_IDLE, file); |
| } |
| |
| init_completion(&op->com); |
| hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, |
| HvLpEvent_Type_VirtualIo, |
| viomajorsubtype_tape | viotapeop, |
| HvLpEvent_AckInd_DoAck, |
| HvLpEvent_AckType_ImmediateAck, |
| viopath_sourceinst(viopath_hostLp), |
| viopath_targetinst(viopath_hostLp), |
| (u64)(unsigned long)op, |
| VIOVERSION << 16, |
| ((u64)devi.devno << 48), 0, |
| (((u64)myOp) << 32) | mtc.mt_count, 0); |
| if (hvrc != HvLpEvent_Rc_Good) { |
| printk(VIOTAPE_KERN_WARN "hv error on op %d\n", |
| (int)hvrc); |
| goto free_op; |
| } |
| wait_for_completion(&op->com); |
| ret = tape_rc_to_errno(op->rc, "tape operation", devi.devno); |
| goto free_op; |
| |
| case MTIOCGET: |
| ret = -EIO; |
| init_completion(&op->com); |
| hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, |
| HvLpEvent_Type_VirtualIo, |
| viomajorsubtype_tape | viotapegetstatus, |
| HvLpEvent_AckInd_DoAck, |
| HvLpEvent_AckType_ImmediateAck, |
| viopath_sourceinst(viopath_hostLp), |
| viopath_targetinst(viopath_hostLp), |
| (u64)(unsigned long)op, VIOVERSION << 16, |
| ((u64)devi.devno << 48), 0, 0, 0); |
| if (hvrc != HvLpEvent_Rc_Good) { |
| printk(VIOTAPE_KERN_WARN "hv error on op %d\n", |
| (int)hvrc); |
| goto free_op; |
| } |
| wait_for_completion(&op->com); |
| |
| /* Operation is complete - grab the error code */ |
| ret = tape_rc_to_errno(op->rc, "get status", devi.devno); |
| free_op_struct(op); |
| up(&reqSem); |
| |
| if ((ret == 0) && copy_to_user((void *)arg, |
| &viomtget[devi.devno], |
| sizeof(viomtget[0]))) |
| ret = -EFAULT; |
| return ret; |
| case MTIOCPOS: |
| printk(VIOTAPE_KERN_WARN "Got an (unsupported) MTIOCPOS\n"); |
| break; |
| default: |
| printk(VIOTAPE_KERN_WARN "got an unsupported ioctl 0x%0x\n", |
| cmd); |
| break; |
| } |
| |
| free_op: |
| free_op_struct(op); |
| up(&reqSem); |
| return ret; |
| } |
| |
| static int viotap_open(struct inode *inode, struct file *file) |
| { |
| HvLpEvent_Rc hvrc; |
| struct viot_devinfo_struct devi; |
| int ret; |
| struct op_struct *op = get_op_struct(); |
| |
| if (op == NULL) |
| return -ENOMEM; |
| |
| get_dev_info(file->f_dentry->d_inode, &devi); |
| |
| /* Note: We currently only support one mode! */ |
| if ((devi.devno >= viotape_numdev) || (devi.mode)) { |
| ret = -ENODEV; |
| goto free_op; |
| } |
| |
| init_completion(&op->com); |
| |
| hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, |
| HvLpEvent_Type_VirtualIo, |
| viomajorsubtype_tape | viotapeopen, |
| HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, |
| viopath_sourceinst(viopath_hostLp), |
| viopath_targetinst(viopath_hostLp), |
| (u64)(unsigned long)op, VIOVERSION << 16, |
| ((u64)devi.devno << 48), 0, 0, 0); |
| if (hvrc != 0) { |
| printk(VIOTAPE_KERN_WARN "bad rc on signalLpEvent %d\n", |
| (int) hvrc); |
| ret = -EIO; |
| goto free_op; |
| } |
| |
| wait_for_completion(&op->com); |
| ret = tape_rc_to_errno(op->rc, "open", devi.devno); |
| |
| free_op: |
| free_op_struct(op); |
| return ret; |
| } |
| |
| |
| static int viotap_release(struct inode *inode, struct file *file) |
| { |
| HvLpEvent_Rc hvrc; |
| struct viot_devinfo_struct devi; |
| int ret = 0; |
| struct op_struct *op = get_op_struct(); |
| |
| if (op == NULL) |
| return -ENOMEM; |
| init_completion(&op->com); |
| |
| get_dev_info(file->f_dentry->d_inode, &devi); |
| |
| if (devi.devno >= viotape_numdev) { |
| ret = -ENODEV; |
| goto free_op; |
| } |
| |
| chg_state(devi.devno, VIOT_IDLE, file); |
| |
| if (devi.rewind) { |
| hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, |
| HvLpEvent_Type_VirtualIo, |
| viomajorsubtype_tape | viotapeop, |
| HvLpEvent_AckInd_DoAck, |
| HvLpEvent_AckType_ImmediateAck, |
| viopath_sourceinst(viopath_hostLp), |
| viopath_targetinst(viopath_hostLp), |
| (u64)(unsigned long)op, VIOVERSION << 16, |
| ((u64)devi.devno << 48), 0, |
| ((u64)VIOTAPOP_REW) << 32, 0); |
| wait_for_completion(&op->com); |
| |
| tape_rc_to_errno(op->rc, "rewind", devi.devno); |
| } |
| |
| hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, |
| HvLpEvent_Type_VirtualIo, |
| viomajorsubtype_tape | viotapeclose, |
| HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, |
| viopath_sourceinst(viopath_hostLp), |
| viopath_targetinst(viopath_hostLp), |
| (u64)(unsigned long)op, VIOVERSION << 16, |
| ((u64)devi.devno << 48), 0, 0, 0); |
| if (hvrc != 0) { |
| printk(VIOTAPE_KERN_WARN "bad rc on signalLpEvent %d\n", |
| (int) hvrc); |
| ret = -EIO; |
| goto free_op; |
| } |
| |
| wait_for_completion(&op->com); |
| |
| if (op->rc) |
| printk(VIOTAPE_KERN_WARN "close failed\n"); |
| |
| free_op: |
| free_op_struct(op); |
| return ret; |
| } |
| |
| struct file_operations viotap_fops = { |
| owner: THIS_MODULE, |
| read: viotap_read, |
| write: viotap_write, |
| ioctl: viotap_ioctl, |
| open: viotap_open, |
| release: viotap_release, |
| }; |
| |
| /* Handle interrupt events for tape */ |
| static void vioHandleTapeEvent(struct HvLpEvent *event) |
| { |
| int tapeminor; |
| struct op_struct *op; |
| struct viotapelpevent *tevent = (struct viotapelpevent *)event; |
| |
| if (event == NULL) { |
| /* Notification that a partition went away! */ |
| if (!viopath_isactive(viopath_hostLp)) { |
| /* TODO! Clean up */ |
| } |
| return; |
| } |
| |
| tapeminor = event->xSubtype & VIOMINOR_SUBTYPE_MASK; |
| op = (struct op_struct *)event->xCorrelationToken; |
| switch (tapeminor) { |
| case viotapegetinfo: |
| case viotapeopen: |
| case viotapeclose: |
| op->rc = tevent->sub_type_result; |
| complete(&op->com); |
| break; |
| case viotaperead: |
| op->rc = tevent->sub_type_result; |
| op->count = tevent->len; |
| complete(&op->com); |
| break; |
| case viotapewrite: |
| if (op->non_blocking) { |
| dma_free_coherent(op->dev, op->count, |
| op->buffer, op->dmaaddr); |
| free_op_struct(op); |
| up(&reqSem); |
| } else { |
| op->rc = tevent->sub_type_result; |
| op->count = tevent->len; |
| complete(&op->com); |
| } |
| break; |
| case viotapeop: |
| case viotapegetpos: |
| case viotapesetpos: |
| case viotapegetstatus: |
| if (op) { |
| op->count = tevent->u.op.count; |
| op->rc = tevent->sub_type_result; |
| if (!op->non_blocking) |
| complete(&op->com); |
| } |
| break; |
| default: |
| printk(VIOTAPE_KERN_WARN "weird ack\n"); |
| } |
| } |
| |
| static int viotape_probe(struct vio_dev *vdev, const struct vio_device_id *id) |
| { |
| char tapename[32]; |
| int i = vdev->unit_address; |
| int j; |
| |
| if (i >= viotape_numdev) |
| return -ENODEV; |
| |
| tape_device[i] = &vdev->dev; |
| |
| state[i].cur_part = 0; |
| for (j = 0; j < MAX_PARTITIONS; ++j) |
| state[i].part_stat_rwi[j] = VIOT_IDLE; |
| class_device_create(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i), NULL, |
| "iseries!vt%d", i); |
| class_device_create(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i | 0x80), |
| NULL, "iseries!nvt%d", i); |
| sprintf(tapename, "iseries/vt%d", i); |
| printk(VIOTAPE_KERN_INFO "tape %s is iSeries " |
| "resource %10.10s type %4.4s, model %3.3s\n", |
| tapename, viotape_unitinfo[i].rsrcname, |
| viotape_unitinfo[i].type, viotape_unitinfo[i].model); |
| return 0; |
| } |
| |
| static int viotape_remove(struct vio_dev *vdev) |
| { |
| int i = vdev->unit_address; |
| |
| class_device_destroy(tape_class, MKDEV(VIOTAPE_MAJOR, i | 0x80)); |
| class_device_destroy(tape_class, MKDEV(VIOTAPE_MAJOR, i)); |
| return 0; |
| } |
| |
| /** |
| * viotape_device_table: Used by vio.c to match devices that we |
| * support. |
| */ |
| static struct vio_device_id viotape_device_table[] __devinitdata = { |
| { "byte", "IBM,iSeries-viotape" }, |
| { "", "" } |
| }; |
| MODULE_DEVICE_TABLE(vio, viotape_device_table); |
| |
| static struct vio_driver viotape_driver = { |
| .id_table = viotape_device_table, |
| .probe = viotape_probe, |
| .remove = viotape_remove, |
| .driver = { |
| .name = "viotape", |
| .owner = THIS_MODULE, |
| } |
| }; |
| |
| |
| int __init viotap_init(void) |
| { |
| int ret; |
| struct proc_dir_entry *e; |
| |
| op_struct_list = NULL; |
| if ((ret = add_op_structs(VIOTAPE_MAXREQ)) < 0) { |
| printk(VIOTAPE_KERN_WARN "couldn't allocate op structs\n"); |
| return ret; |
| } |
| spin_lock_init(&op_struct_list_lock); |
| |
| sema_init(&reqSem, VIOTAPE_MAXREQ); |
| |
| if (viopath_hostLp == HvLpIndexInvalid) { |
| vio_set_hostlp(); |
| if (viopath_hostLp == HvLpIndexInvalid) { |
| ret = -ENODEV; |
| goto clear_op; |
| } |
| } |
| |
| ret = viopath_open(viopath_hostLp, viomajorsubtype_tape, |
| VIOTAPE_MAXREQ + 2); |
| if (ret) { |
| printk(VIOTAPE_KERN_WARN |
| "error on viopath_open to hostlp %d\n", ret); |
| ret = -EIO; |
| goto clear_op; |
| } |
| |
| printk(VIOTAPE_KERN_INFO "vers " VIOTAPE_VERSION |
| ", hosting partition %d\n", viopath_hostLp); |
| |
| vio_setHandler(viomajorsubtype_tape, vioHandleTapeEvent); |
| |
| ret = register_chrdev(VIOTAPE_MAJOR, "viotape", &viotap_fops); |
| if (ret < 0) { |
| printk(VIOTAPE_KERN_WARN "Error registering viotape device\n"); |
| goto clear_handler; |
| } |
| |
| tape_class = class_create(THIS_MODULE, "tape"); |
| if (IS_ERR(tape_class)) { |
| printk(VIOTAPE_KERN_WARN "Unable to allocat class\n"); |
| ret = PTR_ERR(tape_class); |
| goto unreg_chrdev; |
| } |
| |
| if ((ret = get_viotape_info()) < 0) { |
| printk(VIOTAPE_KERN_WARN "Unable to obtain virtual device information"); |
| goto unreg_class; |
| } |
| |
| ret = vio_register_driver(&viotape_driver); |
| if (ret) |
| goto unreg_class; |
| |
| e = create_proc_entry("iSeries/viotape", S_IFREG|S_IRUGO, NULL); |
| if (e) { |
| e->owner = THIS_MODULE; |
| e->proc_fops = &proc_viotape_operations; |
| } |
| |
| return 0; |
| |
| unreg_class: |
| class_destroy(tape_class); |
| unreg_chrdev: |
| unregister_chrdev(VIOTAPE_MAJOR, "viotape"); |
| clear_handler: |
| vio_clearHandler(viomajorsubtype_tape); |
| viopath_close(viopath_hostLp, viomajorsubtype_tape, VIOTAPE_MAXREQ + 2); |
| clear_op: |
| clear_op_struct_pool(); |
| return ret; |
| } |
| |
| /* Give a new state to the tape object */ |
| static int chg_state(int index, unsigned char new_state, struct file *file) |
| { |
| unsigned char *cur_state = |
| &state[index].part_stat_rwi[state[index].cur_part]; |
| int rc = 0; |
| |
| /* if the same state, don't bother */ |
| if (*cur_state == new_state) |
| return 0; |
| |
| /* write an EOF if changing from writing to some other state */ |
| if (*cur_state == VIOT_WRITING) { |
| struct mtop write_eof = { MTWEOF, 1 }; |
| |
| rc = viotap_ioctl(NULL, file, MTIOCTOP, |
| (unsigned long)&write_eof); |
| } |
| *cur_state = new_state; |
| return rc; |
| } |
| |
| /* Cleanup */ |
| static void __exit viotap_exit(void) |
| { |
| int ret; |
| |
| remove_proc_entry("iSeries/viotape", NULL); |
| vio_unregister_driver(&viotape_driver); |
| class_destroy(tape_class); |
| ret = unregister_chrdev(VIOTAPE_MAJOR, "viotape"); |
| if (ret < 0) |
| printk(VIOTAPE_KERN_WARN "Error unregistering device: %d\n", |
| ret); |
| if (viotape_unitinfo) |
| dma_free_coherent(iSeries_vio_dev, |
| sizeof(viotape_unitinfo[0]) * VIOTAPE_MAX_TAPE, |
| viotape_unitinfo, viotape_unitinfo_token); |
| viopath_close(viopath_hostLp, viomajorsubtype_tape, VIOTAPE_MAXREQ + 2); |
| vio_clearHandler(viomajorsubtype_tape); |
| clear_op_struct_pool(); |
| } |
| |
| MODULE_LICENSE("GPL"); |
| module_init(viotap_init); |
| module_exit(viotap_exit); |