[SCSI] Add detailed SCSI I/O errors
Instead of just passing 'EIO' for any I/O error we should be
notifying the upper layers with more details about the cause
of this error.
Update the possible I/O errors to:
- ENOLINK: Link failure between host and target
- EIO: Retryable I/O error
- EREMOTEIO: Non-retryable I/O error
- EBADE: I/O error restricted to the I_T_L nexus
'Retryable' in this context means that an I/O error _might_ be
restricted to the I_T_L nexus (vulgo: path), so retrying on another
nexus / path might succeed.
'Non-retryable' in general refers to a target failure, so this
error will always be generated regardless of the I_T_L nexus
it was send on.
I/O errors restricted to the I_T_L nexus might be retried
on another nexus / path, but they should _not_ be queued
if no paths are available.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 45c7564..991de3c 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -223,7 +223,7 @@
* @scmd: Cmd to have sense checked.
*
* Return value:
- * SUCCESS or FAILED or NEEDS_RETRY
+ * SUCCESS or FAILED or NEEDS_RETRY or TARGET_ERROR
*
* Notes:
* When a deferred error is detected the current command has
@@ -326,17 +326,19 @@
*/
return SUCCESS;
- /* these three are not supported */
+ /* these are not supported */
case COPY_ABORTED:
case VOLUME_OVERFLOW:
case MISCOMPARE:
- return SUCCESS;
+ case BLANK_CHECK:
+ case DATA_PROTECT:
+ return TARGET_ERROR;
case MEDIUM_ERROR:
if (sshdr.asc == 0x11 || /* UNRECOVERED READ ERR */
sshdr.asc == 0x13 || /* AMNF DATA FIELD */
sshdr.asc == 0x14) { /* RECORD NOT FOUND */
- return SUCCESS;
+ return TARGET_ERROR;
}
return NEEDS_RETRY;
@@ -344,11 +346,9 @@
if (scmd->device->retry_hwerror)
return ADD_TO_MLQUEUE;
else
- return SUCCESS;
+ return TARGET_ERROR;
case ILLEGAL_REQUEST:
- case BLANK_CHECK:
- case DATA_PROTECT:
default:
return SUCCESS;
}
@@ -787,6 +787,7 @@
case SUCCESS:
case NEEDS_RETRY:
case FAILED:
+ case TARGET_ERROR:
break;
case ADD_TO_MLQUEUE:
rtn = NEEDS_RETRY;
@@ -1469,6 +1470,14 @@
rtn = scsi_check_sense(scmd);
if (rtn == NEEDS_RETRY)
goto maybe_retry;
+ else if (rtn == TARGET_ERROR) {
+ /*
+ * Need to modify host byte to signal a
+ * permanent target failure
+ */
+ scmd->result |= (DID_TARGET_FAILURE << 16);
+ rtn = SUCCESS;
+ }
/* if rtn == FAILED, we have no sense information;
* returning FAILED will wake the error handler thread
* to collect the sense and redo the decide
@@ -1486,6 +1495,7 @@
case RESERVATION_CONFLICT:
sdev_printk(KERN_INFO, scmd->device,
"reservation conflict\n");
+ scmd->result |= (DID_NEXUS_FAILURE << 16);
return SUCCESS; /* causes immediate i/o error */
default:
return FAILED;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 9045c52..8d4ef8e 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -667,6 +667,30 @@
}
EXPORT_SYMBOL(scsi_release_buffers);
+static int __scsi_error_from_host_byte(struct scsi_cmnd *cmd, int result)
+{
+ int error = 0;
+
+ switch(host_byte(result)) {
+ case DID_TRANSPORT_FAILFAST:
+ error = -ENOLINK;
+ break;
+ case DID_TARGET_FAILURE:
+ cmd->result |= (DID_OK << 16);
+ error = -EREMOTEIO;
+ break;
+ case DID_NEXUS_FAILURE:
+ cmd->result |= (DID_OK << 16);
+ error = -EBADE;
+ break;
+ default:
+ error = -EIO;
+ break;
+ }
+
+ return error;
+}
+
/*
* Function: scsi_io_completion()
*
@@ -737,7 +761,7 @@
req->sense_len = len;
}
if (!sense_deferred)
- error = -EIO;
+ error = __scsi_error_from_host_byte(cmd, result);
}
req->resid_len = scsi_get_resid(cmd);
@@ -796,7 +820,7 @@
if (scsi_end_request(cmd, error, good_bytes, result == 0) == NULL)
return;
- error = -EIO;
+ error = __scsi_error_from_host_byte(cmd, result);
if (host_byte(result) == DID_RESET) {
/* Third party bus reset or reset for error recovery
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 648d233..ead8dd0 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -434,6 +434,10 @@
* recover the link. Transport class will
* retry or fail IO */
#define DID_TRANSPORT_FAILFAST 0x0f /* Transport class fastfailed the io */
+#define DID_TARGET_FAILURE 0x10 /* Permanent target failure, do not retry on
+ * other paths */
+#define DID_NEXUS_FAILURE 0x11 /* Permanent nexus failure, retry on other
+ * paths might yield different results */
#define DRIVER_OK 0x00 /* Driver status */
/*
@@ -463,6 +467,7 @@
#define TIMEOUT_ERROR 0x2007
#define SCSI_RETURN_NOT_HANDLED 0x2008
#define FAST_IO_FAIL 0x2009
+#define TARGET_ERROR 0x200A
/*
* Midlevel queue return values.