| /* |
| * I2C client/driver for the ST M41T80 family of i2c rtc chips. |
| * |
| * Author: Alexander Bigga <ab@mycable.de> |
| * |
| * Based on m41t00.c by Mark A. Greer <mgreer@mvista.com> |
| * |
| * 2006 (c) mycable GmbH |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/bcd.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/rtc.h> |
| #include <linux/slab.h> |
| #include <linux/smp_lock.h> |
| #include <linux/string.h> |
| #ifdef CONFIG_RTC_DRV_M41T80_WDT |
| #include <linux/fs.h> |
| #include <linux/ioctl.h> |
| #include <linux/miscdevice.h> |
| #include <linux/reboot.h> |
| #include <linux/watchdog.h> |
| #endif |
| |
| #define M41T80_REG_SSEC 0 |
| #define M41T80_REG_SEC 1 |
| #define M41T80_REG_MIN 2 |
| #define M41T80_REG_HOUR 3 |
| #define M41T80_REG_WDAY 4 |
| #define M41T80_REG_DAY 5 |
| #define M41T80_REG_MON 6 |
| #define M41T80_REG_YEAR 7 |
| #define M41T80_REG_ALARM_MON 0xa |
| #define M41T80_REG_ALARM_DAY 0xb |
| #define M41T80_REG_ALARM_HOUR 0xc |
| #define M41T80_REG_ALARM_MIN 0xd |
| #define M41T80_REG_ALARM_SEC 0xe |
| #define M41T80_REG_FLAGS 0xf |
| #define M41T80_REG_SQW 0x13 |
| |
| #define M41T80_DATETIME_REG_SIZE (M41T80_REG_YEAR + 1) |
| #define M41T80_ALARM_REG_SIZE \ |
| (M41T80_REG_ALARM_SEC + 1 - M41T80_REG_ALARM_MON) |
| |
| #define M41T80_SEC_ST (1 << 7) /* ST: Stop Bit */ |
| #define M41T80_ALMON_AFE (1 << 7) /* AFE: AF Enable Bit */ |
| #define M41T80_ALMON_SQWE (1 << 6) /* SQWE: SQW Enable Bit */ |
| #define M41T80_ALHOUR_HT (1 << 6) /* HT: Halt Update Bit */ |
| #define M41T80_FLAGS_AF (1 << 6) /* AF: Alarm Flag Bit */ |
| #define M41T80_FLAGS_BATT_LOW (1 << 4) /* BL: Battery Low Bit */ |
| #define M41T80_WATCHDOG_RB2 (1 << 7) /* RB: Watchdog resolution */ |
| #define M41T80_WATCHDOG_RB1 (1 << 1) /* RB: Watchdog resolution */ |
| #define M41T80_WATCHDOG_RB0 (1 << 0) /* RB: Watchdog resolution */ |
| |
| #define M41T80_FEATURE_HT (1 << 0) /* Halt feature */ |
| #define M41T80_FEATURE_BL (1 << 1) /* Battery low indicator */ |
| #define M41T80_FEATURE_SQ (1 << 2) /* Squarewave feature */ |
| #define M41T80_FEATURE_WD (1 << 3) /* Extra watchdog resolution */ |
| #define M41T80_FEATURE_SQ_ALT (1 << 4) /* RSx bits are in reg 4 */ |
| |
| #define DRV_VERSION "0.05" |
| |
| static const struct i2c_device_id m41t80_id[] = { |
| { "m41t62", M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT }, |
| { "m41t65", M41T80_FEATURE_HT | M41T80_FEATURE_WD }, |
| { "m41t80", M41T80_FEATURE_SQ }, |
| { "m41t81", M41T80_FEATURE_HT | M41T80_FEATURE_SQ}, |
| { "m41t81s", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, |
| { "m41t82", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, |
| { "m41t83", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, |
| { "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, |
| { "m41st85", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, |
| { "m41st87", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, m41t80_id); |
| |
| struct m41t80_data { |
| u8 features; |
| struct rtc_device *rtc; |
| }; |
| |
| static int m41t80_get_datetime(struct i2c_client *client, |
| struct rtc_time *tm) |
| { |
| u8 buf[M41T80_DATETIME_REG_SIZE], dt_addr[1] = { M41T80_REG_SEC }; |
| struct i2c_msg msgs[] = { |
| { |
| .addr = client->addr, |
| .flags = 0, |
| .len = 1, |
| .buf = dt_addr, |
| }, |
| { |
| .addr = client->addr, |
| .flags = I2C_M_RD, |
| .len = M41T80_DATETIME_REG_SIZE - M41T80_REG_SEC, |
| .buf = buf + M41T80_REG_SEC, |
| }, |
| }; |
| |
| if (i2c_transfer(client->adapter, msgs, 2) < 0) { |
| dev_err(&client->dev, "read error\n"); |
| return -EIO; |
| } |
| |
| tm->tm_sec = bcd2bin(buf[M41T80_REG_SEC] & 0x7f); |
| tm->tm_min = bcd2bin(buf[M41T80_REG_MIN] & 0x7f); |
| tm->tm_hour = bcd2bin(buf[M41T80_REG_HOUR] & 0x3f); |
| tm->tm_mday = bcd2bin(buf[M41T80_REG_DAY] & 0x3f); |
| tm->tm_wday = buf[M41T80_REG_WDAY] & 0x07; |
| tm->tm_mon = bcd2bin(buf[M41T80_REG_MON] & 0x1f) - 1; |
| |
| /* assume 20YY not 19YY, and ignore the Century Bit */ |
| tm->tm_year = bcd2bin(buf[M41T80_REG_YEAR]) + 100; |
| return rtc_valid_tm(tm); |
| } |
| |
| /* Sets the given date and time to the real time clock. */ |
| static int m41t80_set_datetime(struct i2c_client *client, struct rtc_time *tm) |
| { |
| u8 wbuf[1 + M41T80_DATETIME_REG_SIZE]; |
| u8 *buf = &wbuf[1]; |
| u8 dt_addr[1] = { M41T80_REG_SEC }; |
| struct i2c_msg msgs_in[] = { |
| { |
| .addr = client->addr, |
| .flags = 0, |
| .len = 1, |
| .buf = dt_addr, |
| }, |
| { |
| .addr = client->addr, |
| .flags = I2C_M_RD, |
| .len = M41T80_DATETIME_REG_SIZE - M41T80_REG_SEC, |
| .buf = buf + M41T80_REG_SEC, |
| }, |
| }; |
| struct i2c_msg msgs[] = { |
| { |
| .addr = client->addr, |
| .flags = 0, |
| .len = 1 + M41T80_DATETIME_REG_SIZE, |
| .buf = wbuf, |
| }, |
| }; |
| |
| /* Read current reg values into buf[1..7] */ |
| if (i2c_transfer(client->adapter, msgs_in, 2) < 0) { |
| dev_err(&client->dev, "read error\n"); |
| return -EIO; |
| } |
| |
| wbuf[0] = 0; /* offset into rtc's regs */ |
| /* Merge time-data and register flags into buf[0..7] */ |
| buf[M41T80_REG_SSEC] = 0; |
| buf[M41T80_REG_SEC] = |
| bin2bcd(tm->tm_sec) | (buf[M41T80_REG_SEC] & ~0x7f); |
| buf[M41T80_REG_MIN] = |
| bin2bcd(tm->tm_min) | (buf[M41T80_REG_MIN] & ~0x7f); |
| buf[M41T80_REG_HOUR] = |
| bin2bcd(tm->tm_hour) | (buf[M41T80_REG_HOUR] & ~0x3f) ; |
| buf[M41T80_REG_WDAY] = |
| (tm->tm_wday & 0x07) | (buf[M41T80_REG_WDAY] & ~0x07); |
| buf[M41T80_REG_DAY] = |
| bin2bcd(tm->tm_mday) | (buf[M41T80_REG_DAY] & ~0x3f); |
| buf[M41T80_REG_MON] = |
| bin2bcd(tm->tm_mon + 1) | (buf[M41T80_REG_MON] & ~0x1f); |
| /* assume 20YY not 19YY */ |
| buf[M41T80_REG_YEAR] = bin2bcd(tm->tm_year % 100); |
| |
| if (i2c_transfer(client->adapter, msgs, 1) != 1) { |
| dev_err(&client->dev, "write error\n"); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| #if defined(CONFIG_RTC_INTF_PROC) || defined(CONFIG_RTC_INTF_PROC_MODULE) |
| static int m41t80_rtc_proc(struct device *dev, struct seq_file *seq) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct m41t80_data *clientdata = i2c_get_clientdata(client); |
| u8 reg; |
| |
| if (clientdata->features & M41T80_FEATURE_BL) { |
| reg = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS); |
| seq_printf(seq, "battery\t\t: %s\n", |
| (reg & M41T80_FLAGS_BATT_LOW) ? "exhausted" : "ok"); |
| } |
| return 0; |
| } |
| #else |
| #define m41t80_rtc_proc NULL |
| #endif |
| |
| static int m41t80_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| { |
| return m41t80_get_datetime(to_i2c_client(dev), tm); |
| } |
| |
| static int m41t80_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| return m41t80_set_datetime(to_i2c_client(dev), tm); |
| } |
| |
| #if defined(CONFIG_RTC_INTF_DEV) || defined(CONFIG_RTC_INTF_DEV_MODULE) |
| static int |
| m41t80_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| int rc; |
| |
| switch (cmd) { |
| case RTC_AIE_OFF: |
| case RTC_AIE_ON: |
| break; |
| default: |
| return -ENOIOCTLCMD; |
| } |
| |
| rc = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON); |
| if (rc < 0) |
| goto err; |
| switch (cmd) { |
| case RTC_AIE_OFF: |
| rc &= ~M41T80_ALMON_AFE; |
| break; |
| case RTC_AIE_ON: |
| rc |= M41T80_ALMON_AFE; |
| break; |
| } |
| if (i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, rc) < 0) |
| goto err; |
| return 0; |
| err: |
| return -EIO; |
| } |
| #else |
| #define m41t80_rtc_ioctl NULL |
| #endif |
| |
| static int m41t80_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *t) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| u8 wbuf[1 + M41T80_ALARM_REG_SIZE]; |
| u8 *buf = &wbuf[1]; |
| u8 *reg = buf - M41T80_REG_ALARM_MON; |
| u8 dt_addr[1] = { M41T80_REG_ALARM_MON }; |
| struct i2c_msg msgs_in[] = { |
| { |
| .addr = client->addr, |
| .flags = 0, |
| .len = 1, |
| .buf = dt_addr, |
| }, |
| { |
| .addr = client->addr, |
| .flags = I2C_M_RD, |
| .len = M41T80_ALARM_REG_SIZE, |
| .buf = buf, |
| }, |
| }; |
| struct i2c_msg msgs[] = { |
| { |
| .addr = client->addr, |
| .flags = 0, |
| .len = 1 + M41T80_ALARM_REG_SIZE, |
| .buf = wbuf, |
| }, |
| }; |
| |
| if (i2c_transfer(client->adapter, msgs_in, 2) < 0) { |
| dev_err(&client->dev, "read error\n"); |
| return -EIO; |
| } |
| reg[M41T80_REG_ALARM_MON] &= ~(0x1f | M41T80_ALMON_AFE); |
| reg[M41T80_REG_ALARM_DAY] = 0; |
| reg[M41T80_REG_ALARM_HOUR] &= ~(0x3f | 0x80); |
| reg[M41T80_REG_ALARM_MIN] = 0; |
| reg[M41T80_REG_ALARM_SEC] = 0; |
| |
| wbuf[0] = M41T80_REG_ALARM_MON; /* offset into rtc's regs */ |
| reg[M41T80_REG_ALARM_SEC] |= t->time.tm_sec >= 0 ? |
| bin2bcd(t->time.tm_sec) : 0x80; |
| reg[M41T80_REG_ALARM_MIN] |= t->time.tm_min >= 0 ? |
| bin2bcd(t->time.tm_min) : 0x80; |
| reg[M41T80_REG_ALARM_HOUR] |= t->time.tm_hour >= 0 ? |
| bin2bcd(t->time.tm_hour) : 0x80; |
| reg[M41T80_REG_ALARM_DAY] |= t->time.tm_mday >= 0 ? |
| bin2bcd(t->time.tm_mday) : 0x80; |
| if (t->time.tm_mon >= 0) |
| reg[M41T80_REG_ALARM_MON] |= bin2bcd(t->time.tm_mon + 1); |
| else |
| reg[M41T80_REG_ALARM_DAY] |= 0x40; |
| |
| if (i2c_transfer(client->adapter, msgs, 1) != 1) { |
| dev_err(&client->dev, "write error\n"); |
| return -EIO; |
| } |
| |
| if (t->enabled) { |
| reg[M41T80_REG_ALARM_MON] |= M41T80_ALMON_AFE; |
| if (i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, |
| reg[M41T80_REG_ALARM_MON]) < 0) { |
| dev_err(&client->dev, "write error\n"); |
| return -EIO; |
| } |
| } |
| return 0; |
| } |
| |
| static int m41t80_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *t) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| u8 buf[M41T80_ALARM_REG_SIZE + 1]; /* all alarm regs and flags */ |
| u8 dt_addr[1] = { M41T80_REG_ALARM_MON }; |
| u8 *reg = buf - M41T80_REG_ALARM_MON; |
| struct i2c_msg msgs[] = { |
| { |
| .addr = client->addr, |
| .flags = 0, |
| .len = 1, |
| .buf = dt_addr, |
| }, |
| { |
| .addr = client->addr, |
| .flags = I2C_M_RD, |
| .len = M41T80_ALARM_REG_SIZE + 1, |
| .buf = buf, |
| }, |
| }; |
| |
| if (i2c_transfer(client->adapter, msgs, 2) < 0) { |
| dev_err(&client->dev, "read error\n"); |
| return -EIO; |
| } |
| t->time.tm_sec = -1; |
| t->time.tm_min = -1; |
| t->time.tm_hour = -1; |
| t->time.tm_mday = -1; |
| t->time.tm_mon = -1; |
| if (!(reg[M41T80_REG_ALARM_SEC] & 0x80)) |
| t->time.tm_sec = bcd2bin(reg[M41T80_REG_ALARM_SEC] & 0x7f); |
| if (!(reg[M41T80_REG_ALARM_MIN] & 0x80)) |
| t->time.tm_min = bcd2bin(reg[M41T80_REG_ALARM_MIN] & 0x7f); |
| if (!(reg[M41T80_REG_ALARM_HOUR] & 0x80)) |
| t->time.tm_hour = bcd2bin(reg[M41T80_REG_ALARM_HOUR] & 0x3f); |
| if (!(reg[M41T80_REG_ALARM_DAY] & 0x80)) |
| t->time.tm_mday = bcd2bin(reg[M41T80_REG_ALARM_DAY] & 0x3f); |
| if (!(reg[M41T80_REG_ALARM_DAY] & 0x40)) |
| t->time.tm_mon = bcd2bin(reg[M41T80_REG_ALARM_MON] & 0x1f) - 1; |
| t->time.tm_year = -1; |
| t->time.tm_wday = -1; |
| t->time.tm_yday = -1; |
| t->time.tm_isdst = -1; |
| t->enabled = !!(reg[M41T80_REG_ALARM_MON] & M41T80_ALMON_AFE); |
| t->pending = !!(reg[M41T80_REG_FLAGS] & M41T80_FLAGS_AF); |
| return rtc_valid_tm(t); |
| } |
| |
| static struct rtc_class_ops m41t80_rtc_ops = { |
| .read_time = m41t80_rtc_read_time, |
| .set_time = m41t80_rtc_set_time, |
| .read_alarm = m41t80_rtc_read_alarm, |
| .set_alarm = m41t80_rtc_set_alarm, |
| .proc = m41t80_rtc_proc, |
| .ioctl = m41t80_rtc_ioctl, |
| }; |
| |
| #if defined(CONFIG_RTC_INTF_SYSFS) || defined(CONFIG_RTC_INTF_SYSFS_MODULE) |
| static ssize_t m41t80_sysfs_show_flags(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| int val; |
| |
| val = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS); |
| if (val < 0) |
| return -EIO; |
| return sprintf(buf, "%#x\n", val); |
| } |
| static DEVICE_ATTR(flags, S_IRUGO, m41t80_sysfs_show_flags, NULL); |
| |
| static ssize_t m41t80_sysfs_show_sqwfreq(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct m41t80_data *clientdata = i2c_get_clientdata(client); |
| int val, reg_sqw; |
| |
| if (!(clientdata->features & M41T80_FEATURE_SQ)) |
| return -EINVAL; |
| |
| reg_sqw = M41T80_REG_SQW; |
| if (clientdata->features & M41T80_FEATURE_SQ_ALT) |
| reg_sqw = M41T80_REG_WDAY; |
| val = i2c_smbus_read_byte_data(client, reg_sqw); |
| if (val < 0) |
| return -EIO; |
| val = (val >> 4) & 0xf; |
| switch (val) { |
| case 0: |
| break; |
| case 1: |
| val = 32768; |
| break; |
| default: |
| val = 32768 >> val; |
| } |
| return sprintf(buf, "%d\n", val); |
| } |
| static ssize_t m41t80_sysfs_set_sqwfreq(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct m41t80_data *clientdata = i2c_get_clientdata(client); |
| int almon, sqw, reg_sqw; |
| int val = simple_strtoul(buf, NULL, 0); |
| |
| if (!(clientdata->features & M41T80_FEATURE_SQ)) |
| return -EINVAL; |
| |
| if (val) { |
| if (!is_power_of_2(val)) |
| return -EINVAL; |
| val = ilog2(val); |
| if (val == 15) |
| val = 1; |
| else if (val < 14) |
| val = 15 - val; |
| else |
| return -EINVAL; |
| } |
| /* disable SQW, set SQW frequency & re-enable */ |
| almon = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON); |
| if (almon < 0) |
| return -EIO; |
| reg_sqw = M41T80_REG_SQW; |
| if (clientdata->features & M41T80_FEATURE_SQ_ALT) |
| reg_sqw = M41T80_REG_WDAY; |
| sqw = i2c_smbus_read_byte_data(client, reg_sqw); |
| if (sqw < 0) |
| return -EIO; |
| sqw = (sqw & 0x0f) | (val << 4); |
| if (i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, |
| almon & ~M41T80_ALMON_SQWE) < 0 || |
| i2c_smbus_write_byte_data(client, reg_sqw, sqw) < 0) |
| return -EIO; |
| if (val && i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, |
| almon | M41T80_ALMON_SQWE) < 0) |
| return -EIO; |
| return count; |
| } |
| static DEVICE_ATTR(sqwfreq, S_IRUGO | S_IWUSR, |
| m41t80_sysfs_show_sqwfreq, m41t80_sysfs_set_sqwfreq); |
| |
| static struct attribute *attrs[] = { |
| &dev_attr_flags.attr, |
| &dev_attr_sqwfreq.attr, |
| NULL, |
| }; |
| static struct attribute_group attr_group = { |
| .attrs = attrs, |
| }; |
| |
| static int m41t80_sysfs_register(struct device *dev) |
| { |
| return sysfs_create_group(&dev->kobj, &attr_group); |
| } |
| #else |
| static int m41t80_sysfs_register(struct device *dev) |
| { |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_RTC_DRV_M41T80_WDT |
| /* |
| ***************************************************************************** |
| * |
| * Watchdog Driver |
| * |
| ***************************************************************************** |
| */ |
| static struct i2c_client *save_client; |
| |
| /* Default margin */ |
| #define WD_TIMO 60 /* 1..31 seconds */ |
| |
| static int wdt_margin = WD_TIMO; |
| module_param(wdt_margin, int, 0); |
| MODULE_PARM_DESC(wdt_margin, "Watchdog timeout in seconds (default 60s)"); |
| |
| static unsigned long wdt_is_open; |
| static int boot_flag; |
| |
| /** |
| * wdt_ping: |
| * |
| * Reload counter one with the watchdog timeout. We don't bother reloading |
| * the cascade counter. |
| */ |
| static void wdt_ping(void) |
| { |
| unsigned char i2c_data[2]; |
| struct i2c_msg msgs1[1] = { |
| { |
| .addr = save_client->addr, |
| .flags = 0, |
| .len = 2, |
| .buf = i2c_data, |
| }, |
| }; |
| struct m41t80_data *clientdata = i2c_get_clientdata(save_client); |
| |
| i2c_data[0] = 0x09; /* watchdog register */ |
| |
| if (wdt_margin > 31) |
| i2c_data[1] = (wdt_margin & 0xFC) | 0x83; /* resolution = 4s */ |
| else |
| /* |
| * WDS = 1 (0x80), mulitplier = WD_TIMO, resolution = 1s (0x02) |
| */ |
| i2c_data[1] = wdt_margin<<2 | 0x82; |
| |
| /* |
| * M41T65 has three bits for watchdog resolution. Don't set bit 7, as |
| * that would be an invalid resolution. |
| */ |
| if (clientdata->features & M41T80_FEATURE_WD) |
| i2c_data[1] &= ~M41T80_WATCHDOG_RB2; |
| |
| i2c_transfer(save_client->adapter, msgs1, 1); |
| } |
| |
| /** |
| * wdt_disable: |
| * |
| * disables watchdog. |
| */ |
| static void wdt_disable(void) |
| { |
| unsigned char i2c_data[2], i2c_buf[0x10]; |
| struct i2c_msg msgs0[2] = { |
| { |
| .addr = save_client->addr, |
| .flags = 0, |
| .len = 1, |
| .buf = i2c_data, |
| }, |
| { |
| .addr = save_client->addr, |
| .flags = I2C_M_RD, |
| .len = 1, |
| .buf = i2c_buf, |
| }, |
| }; |
| struct i2c_msg msgs1[1] = { |
| { |
| .addr = save_client->addr, |
| .flags = 0, |
| .len = 2, |
| .buf = i2c_data, |
| }, |
| }; |
| |
| i2c_data[0] = 0x09; |
| i2c_transfer(save_client->adapter, msgs0, 2); |
| |
| i2c_data[0] = 0x09; |
| i2c_data[1] = 0x00; |
| i2c_transfer(save_client->adapter, msgs1, 1); |
| } |
| |
| /** |
| * wdt_write: |
| * @file: file handle to the watchdog |
| * @buf: buffer to write (unused as data does not matter here |
| * @count: count of bytes |
| * @ppos: pointer to the position to write. No seeks allowed |
| * |
| * A write to a watchdog device is defined as a keepalive signal. Any |
| * write of data will do, as we we don't define content meaning. |
| */ |
| static ssize_t wdt_write(struct file *file, const char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| if (count) { |
| wdt_ping(); |
| return 1; |
| } |
| return 0; |
| } |
| |
| static ssize_t wdt_read(struct file *file, char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| return 0; |
| } |
| |
| /** |
| * wdt_ioctl: |
| * @inode: inode of the device |
| * @file: file handle to the device |
| * @cmd: watchdog command |
| * @arg: argument pointer |
| * |
| * The watchdog API defines a common set of functions for all watchdogs |
| * according to their available features. We only actually usefully support |
| * querying capabilities and current status. |
| */ |
| static int wdt_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| int new_margin, rv; |
| static struct watchdog_info ident = { |
| .options = WDIOF_POWERUNDER | WDIOF_KEEPALIVEPING | |
| WDIOF_SETTIMEOUT, |
| .firmware_version = 1, |
| .identity = "M41T80 WTD" |
| }; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| return copy_to_user((struct watchdog_info __user *)arg, &ident, |
| sizeof(ident)) ? -EFAULT : 0; |
| |
| case WDIOC_GETSTATUS: |
| case WDIOC_GETBOOTSTATUS: |
| return put_user(boot_flag, (int __user *)arg); |
| case WDIOC_KEEPALIVE: |
| wdt_ping(); |
| return 0; |
| case WDIOC_SETTIMEOUT: |
| if (get_user(new_margin, (int __user *)arg)) |
| return -EFAULT; |
| /* Arbitrary, can't find the card's limits */ |
| if (new_margin < 1 || new_margin > 124) |
| return -EINVAL; |
| wdt_margin = new_margin; |
| wdt_ping(); |
| /* Fall */ |
| case WDIOC_GETTIMEOUT: |
| return put_user(wdt_margin, (int __user *)arg); |
| |
| case WDIOC_SETOPTIONS: |
| if (copy_from_user(&rv, (int __user *)arg, sizeof(int))) |
| return -EFAULT; |
| |
| if (rv & WDIOS_DISABLECARD) { |
| pr_info("rtc-m41t80: disable watchdog\n"); |
| wdt_disable(); |
| } |
| |
| if (rv & WDIOS_ENABLECARD) { |
| pr_info("rtc-m41t80: enable watchdog\n"); |
| wdt_ping(); |
| } |
| |
| return -EINVAL; |
| } |
| return -ENOTTY; |
| } |
| |
| static long wdt_unlocked_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| int ret; |
| |
| lock_kernel(); |
| ret = wdt_ioctl(file, cmd, arg); |
| unlock_kernel(); |
| |
| return ret; |
| } |
| |
| /** |
| * wdt_open: |
| * @inode: inode of device |
| * @file: file handle to device |
| * |
| */ |
| static int wdt_open(struct inode *inode, struct file *file) |
| { |
| if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) { |
| lock_kernel(); |
| if (test_and_set_bit(0, &wdt_is_open)) { |
| unlock_kernel(); |
| return -EBUSY; |
| } |
| /* |
| * Activate |
| */ |
| wdt_is_open = 1; |
| unlock_kernel(); |
| return nonseekable_open(inode, file); |
| } |
| return -ENODEV; |
| } |
| |
| /** |
| * wdt_close: |
| * @inode: inode to board |
| * @file: file handle to board |
| * |
| */ |
| static int wdt_release(struct inode *inode, struct file *file) |
| { |
| if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) |
| clear_bit(0, &wdt_is_open); |
| return 0; |
| } |
| |
| /** |
| * notify_sys: |
| * @this: our notifier block |
| * @code: the event being reported |
| * @unused: unused |
| * |
| * Our notifier is called on system shutdowns. We want to turn the card |
| * off at reboot otherwise the machine will reboot again during memory |
| * test or worse yet during the following fsck. This would suck, in fact |
| * trust me - if it happens it does suck. |
| */ |
| static int wdt_notify_sys(struct notifier_block *this, unsigned long code, |
| void *unused) |
| { |
| if (code == SYS_DOWN || code == SYS_HALT) |
| /* Disable Watchdog */ |
| wdt_disable(); |
| return NOTIFY_DONE; |
| } |
| |
| static const struct file_operations wdt_fops = { |
| .owner = THIS_MODULE, |
| .read = wdt_read, |
| .unlocked_ioctl = wdt_unlocked_ioctl, |
| .write = wdt_write, |
| .open = wdt_open, |
| .release = wdt_release, |
| }; |
| |
| static struct miscdevice wdt_dev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &wdt_fops, |
| }; |
| |
| /* |
| * The WDT card needs to learn about soft shutdowns in order to |
| * turn the timebomb registers off. |
| */ |
| static struct notifier_block wdt_notifier = { |
| .notifier_call = wdt_notify_sys, |
| }; |
| #endif /* CONFIG_RTC_DRV_M41T80_WDT */ |
| |
| /* |
| ***************************************************************************** |
| * |
| * Driver Interface |
| * |
| ***************************************************************************** |
| */ |
| static int m41t80_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| int rc = 0; |
| struct rtc_device *rtc = NULL; |
| struct rtc_time tm; |
| struct m41t80_data *clientdata = NULL; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
| | I2C_FUNC_SMBUS_BYTE_DATA)) { |
| rc = -ENODEV; |
| goto exit; |
| } |
| |
| dev_info(&client->dev, |
| "chip found, driver version " DRV_VERSION "\n"); |
| |
| clientdata = kzalloc(sizeof(*clientdata), GFP_KERNEL); |
| if (!clientdata) { |
| rc = -ENOMEM; |
| goto exit; |
| } |
| |
| rtc = rtc_device_register(client->name, &client->dev, |
| &m41t80_rtc_ops, THIS_MODULE); |
| if (IS_ERR(rtc)) { |
| rc = PTR_ERR(rtc); |
| rtc = NULL; |
| goto exit; |
| } |
| |
| clientdata->rtc = rtc; |
| clientdata->features = id->driver_data; |
| i2c_set_clientdata(client, clientdata); |
| |
| /* Make sure HT (Halt Update) bit is cleared */ |
| rc = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_HOUR); |
| if (rc < 0) |
| goto ht_err; |
| |
| if (rc & M41T80_ALHOUR_HT) { |
| if (clientdata->features & M41T80_FEATURE_HT) { |
| m41t80_get_datetime(client, &tm); |
| dev_info(&client->dev, "HT bit was set!\n"); |
| dev_info(&client->dev, |
| "Power Down at " |
| "%04i-%02i-%02i %02i:%02i:%02i\n", |
| tm.tm_year + 1900, |
| tm.tm_mon + 1, tm.tm_mday, tm.tm_hour, |
| tm.tm_min, tm.tm_sec); |
| } |
| if (i2c_smbus_write_byte_data(client, |
| M41T80_REG_ALARM_HOUR, |
| rc & ~M41T80_ALHOUR_HT) < 0) |
| goto ht_err; |
| } |
| |
| /* Make sure ST (stop) bit is cleared */ |
| rc = i2c_smbus_read_byte_data(client, M41T80_REG_SEC); |
| if (rc < 0) |
| goto st_err; |
| |
| if (rc & M41T80_SEC_ST) { |
| if (i2c_smbus_write_byte_data(client, M41T80_REG_SEC, |
| rc & ~M41T80_SEC_ST) < 0) |
| goto st_err; |
| } |
| |
| rc = m41t80_sysfs_register(&client->dev); |
| if (rc) |
| goto exit; |
| |
| #ifdef CONFIG_RTC_DRV_M41T80_WDT |
| if (clientdata->features & M41T80_FEATURE_HT) { |
| save_client = client; |
| rc = misc_register(&wdt_dev); |
| if (rc) |
| goto exit; |
| rc = register_reboot_notifier(&wdt_notifier); |
| if (rc) { |
| misc_deregister(&wdt_dev); |
| goto exit; |
| } |
| } |
| #endif |
| return 0; |
| |
| st_err: |
| rc = -EIO; |
| dev_err(&client->dev, "Can't clear ST bit\n"); |
| goto exit; |
| ht_err: |
| rc = -EIO; |
| dev_err(&client->dev, "Can't clear HT bit\n"); |
| goto exit; |
| |
| exit: |
| if (rtc) |
| rtc_device_unregister(rtc); |
| kfree(clientdata); |
| return rc; |
| } |
| |
| static int m41t80_remove(struct i2c_client *client) |
| { |
| struct m41t80_data *clientdata = i2c_get_clientdata(client); |
| struct rtc_device *rtc = clientdata->rtc; |
| |
| #ifdef CONFIG_RTC_DRV_M41T80_WDT |
| if (clientdata->features & M41T80_FEATURE_HT) { |
| misc_deregister(&wdt_dev); |
| unregister_reboot_notifier(&wdt_notifier); |
| } |
| #endif |
| if (rtc) |
| rtc_device_unregister(rtc); |
| kfree(clientdata); |
| |
| return 0; |
| } |
| |
| static struct i2c_driver m41t80_driver = { |
| .driver = { |
| .name = "rtc-m41t80", |
| }, |
| .probe = m41t80_probe, |
| .remove = m41t80_remove, |
| .id_table = m41t80_id, |
| }; |
| |
| static int __init m41t80_rtc_init(void) |
| { |
| return i2c_add_driver(&m41t80_driver); |
| } |
| |
| static void __exit m41t80_rtc_exit(void) |
| { |
| i2c_del_driver(&m41t80_driver); |
| } |
| |
| MODULE_AUTHOR("Alexander Bigga <ab@mycable.de>"); |
| MODULE_DESCRIPTION("ST Microelectronics M41T80 series RTC I2C Client Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(DRV_VERSION); |
| |
| module_init(m41t80_rtc_init); |
| module_exit(m41t80_rtc_exit); |