[PATCH] yenta: make bridge specific init code configurable
Make the bridge specific initialization code config options depending on
CONFIG_EMBEDDED. Config options for TI/EnE, Toshiba, Ricoh and O2Micro are
available. Disabling all of the specific tweaks cuts off more than half
of yenta_socket.ko.
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index fa0625c..826e7e1 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -49,7 +49,13 @@
#define to_cycles(ns) ((ns)/120)
#define to_ns(cycles) ((cycles)*120)
+/**
+ * yenta PCI irq probing.
+ * currently only used in the TI/EnE initialization code
+ */
+#ifdef CONFIG_YENTA_TI
static int yenta_probe_cb_irq(struct yenta_socket *socket);
+#endif
static unsigned int override_bios;
@@ -745,10 +751,18 @@
};
+#ifdef CONFIG_YENTA_TI
#include "ti113x.h"
+#endif
+#ifdef CONFIG_YENTA_RICOH
#include "ricoh.h"
+#endif
+#ifdef CONFIG_YENTA_TOSHIBA
#include "topic.h"
+#endif
+#ifdef CONFIG_YENTA_O2
#include "o2micro.h"
+#endif
enum {
CARDBUS_TYPE_DEFAULT = -1,
@@ -768,6 +782,7 @@
* initialization sequences etc details. List them here..
*/
static struct cardbus_type cardbus_type[] = {
+#ifdef CONFIG_YENTA_TI
[CARDBUS_TYPE_TI] = {
.override = ti_override,
.save_state = ti_save_state,
@@ -792,27 +807,36 @@
.restore_state = ti_restore_state,
.sock_init = ti_init,
},
+#endif
+#ifdef CONFIG_YENTA_RICOH
[CARDBUS_TYPE_RICOH] = {
.override = ricoh_override,
.save_state = ricoh_save_state,
.restore_state = ricoh_restore_state,
},
+#endif
+#ifdef CONFIG_YENTA_TOSHIBA
[CARDBUS_TYPE_TOPIC95] = {
.override = topic95_override,
},
[CARDBUS_TYPE_TOPIC97] = {
.override = topic97_override,
},
+#endif
+#ifdef CONFIG_YENTA_O2
[CARDBUS_TYPE_O2MICRO] = {
.override = o2micro_override,
.restore_state = o2micro_restore_state,
},
+#endif
+#ifdef CONFIG_YENTA_TI
[CARDBUS_TYPE_ENE] = {
.override = ene_override,
.save_state = ti_save_state,
.restore_state = ti_restore_state,
.sock_init = ti_init,
},
+#endif
};
@@ -858,6 +882,12 @@
}
+/**
+ * yenta PCI irq probing.
+ * currently only used in the TI/EnE initialization code
+ */
+#ifdef CONFIG_YENTA_TI
+
/* interrupt handler, only used during probing */
static irqreturn_t yenta_probe_handler(int irq, void *dev_id, struct pt_regs *regs)
{
@@ -910,6 +940,7 @@
return (int) socket->probe_status;
}
+#endif /* CONFIG_YENTA_TI */
/*
@@ -1173,6 +1204,7 @@
* advanced overrides instead. (I can't get the
* data sheets for these devices. --rmk)
*/
+#ifdef CONFIG_YENTA_TI
CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1210, TI),
CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1130, TI113X),
@@ -1215,18 +1247,25 @@
CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, ENE),
CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, ENE),
CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1420, ENE),
+#endif /* CONFIG_YENTA_TI */
+#ifdef CONFIG_YENTA_RICOH
CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C465, RICOH),
CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C466, RICOH),
CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C475, RICOH),
CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, RICOH),
CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C478, RICOH),
+#endif
+#ifdef CONFIG_YENTA_TOSHIBA
CB_ID(PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_TOSHIBA_TOPIC95, TOPIC95),
CB_ID(PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_TOSHIBA_TOPIC97, TOPIC97),
CB_ID(PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_TOSHIBA_TOPIC100, TOPIC97),
+#endif
+#ifdef CONFIG_YENTA_O2
CB_ID(PCI_VENDOR_ID_O2, PCI_ANY_ID, O2MICRO),
+#endif
/* match any cardbus bridge */
CB_ID(PCI_ANY_ID, PCI_ANY_ID, DEFAULT),