m68k: merge m68k and m68knommu arch directories
There is a lot of common code that could be shared between the m68k
and m68knommu arch branches. It makes sense to merge the two branches
into a single directory structure so that we can more easily share
that common code.
This is a brute force merge, based on a script from Stephen King
<sfking@fdwdc.com>, which was originally written by Arnd Bergmann
<arnd@arndb.de>.
> The script was inspired by the script Sam Ravnborg used to merge the
> includes from m68knommu. For those files common to both arches but
> differing in content, the m68k version of the file is renamed to
> <file>_mm.<ext> and the m68knommu version of the file is moved into the
> corresponding m68k directory and renamed <file>_no.<ext> and a small
> wrapper file <file>.<ext> is used to select between the two version. Files
> that are common to both but don't differ are removed from the m68knommu
> tree and files and directories that are unique to the m68knommu tree are
> moved to the m68k tree. Finally, the arch/m68knommu tree is removed.
>
> To select between the the versions of the files, the wrapper uses
>
> #ifdef CONFIG_MMU
> #include <file>_mm.<ext>
> #else
> #include <file>_no.<ext>
> #endif
On top of this file merge I have done a simplistic merge of m68k and
m68knommu Kconfig, which primarily attempts to keep existing options and
menus in place. Other than a handful of options being moved it produces
identical .config outputs on m68k and m68knommu targets I tested it on.
With this in place there is now quite a bit of scope for merge cleanups
in future patches.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 525174d..6e056d3 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -1,13 +1,11 @@
config M68K
bool
default y
- select HAVE_AOUT
select HAVE_IDE
- select GENERIC_ATOMIC64
-
-config MMU
- bool
- default y
+ select HAVE_AOUT if MMU
+ select GENERIC_ATOMIC64 if MMU
+ select HAVE_GENERIC_HARDIRQS if !MMU
+ select GENERIC_HARDIRQS_NO_DEPRECATED if !MMU
config RWSEM_GENERIC_SPINLOCK
bool
@@ -34,457 +32,67 @@
bool
default y
-config GENERIC_IOMAP
- bool
- default y
-
-config ARCH_MAY_HAVE_PC_FDC
- bool
- depends on BROKEN && (Q40 || SUN3X)
- default y
-
config NO_IOPORT
def_bool y
config NO_DMA
- def_bool SUN3
+ def_bool (MMU && SUN3) || (!MMU && !COLDFIRE)
+config ZONE_DMA
+ bool
+ default y
config HZ
int
+ default 1000 if CLEOPATRA
default 100
-config ARCH_USES_GETTIMEOFFSET
- def_bool y
-
source "init/Kconfig"
source "kernel/Kconfig.freezer"
+config MMU
+ bool "MMU-based Paged Memory Management Support"
+ default y
+ help
+ Select if you want MMU-based virtualised addressing space
+ support by paged memory management. If unsure, say 'Y'.
+
menu "Platform dependent setup"
-config EISA
- bool
- ---help---
- The Extended Industry Standard Architecture (EISA) bus was
- developed as an open alternative to the IBM MicroChannel bus.
-
- The EISA bus provided some of the features of the IBM MicroChannel
- bus while maintaining backward compatibility with cards made for
- the older ISA bus. The EISA bus saw limited use between 1988 and
- 1995 when it was made obsolete by the PCI bus.
-
- Say Y here if you are building a kernel for an EISA-based machine.
-
- Otherwise, say N.
-
-config MCA
- bool
- help
- MicroChannel Architecture is found in some IBM PS/2 machines and
- laptops. It is a bus system similar to PCI or ISA. See
- <file:Documentation/mca.txt> (and especially the web page given
- there) before attempting to build an MCA bus kernel.
-
-config PCMCIA
- tristate
- ---help---
- Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
- computer. These are credit-card size devices such as network cards,
- modems or hard drives often used with laptops computers. There are
- actually two varieties of these cards: the older 16 bit PCMCIA cards
- and the newer 32 bit CardBus cards. If you want to use CardBus
- cards, you need to say Y here and also to "CardBus support" below.
-
- To use your PC-cards, you will need supporting software from David
- Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
- for location). Please also read the PCMCIA-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as modules, choose M here: the
- modules will be called pcmcia_core and ds.
-
-config AMIGA
- bool "Amiga support"
- select MMU_MOTOROLA if MMU
- help
- This option enables support for the Amiga series of computers. If
- you plan to use this kernel on an Amiga, say Y here and browse the
- material available in <file:Documentation/m68k>; otherwise say N.
-
-config ATARI
- bool "Atari support"
- select MMU_MOTOROLA if MMU
- help
- This option enables support for the 68000-based Atari series of
- computers (including the TT, Falcon and Medusa). If you plan to use
- this kernel on an Atari, say Y here and browse the material
- available in <file:Documentation/m68k>; otherwise say N.
-
-config MAC
- bool "Macintosh support"
- select MMU_MOTOROLA if MMU
- help
- This option enables support for the Apple Macintosh series of
- computers (yes, there is experimental support now, at least for part
- of the series).
-
- Say N unless you're willing to code the remaining necessary support.
- ;)
-
-config NUBUS
- bool
- depends on MAC
- default y
-
-config M68K_L2_CACHE
- bool
- depends on MAC
- default y
-
-config APOLLO
- bool "Apollo support"
- select MMU_MOTOROLA if MMU
- help
- Say Y here if you want to run Linux on an MC680x0-based Apollo
- Domain workstation such as the DN3500.
-
-config VME
- bool "VME (Motorola and BVM) support"
- select MMU_MOTOROLA if MMU
- help
- Say Y here if you want to build a kernel for a 680x0 based VME
- board. Boards currently supported include Motorola boards MVME147,
- MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and
- BVME6000 boards from BVM Ltd are also supported.
-
-config MVME147
- bool "MVME147 support"
- depends on VME
- help
- Say Y to include support for early Motorola VME boards. This will
- build a kernel which can run on MVME147 single-board computers. If
- you select this option you will have to select the appropriate
- drivers for SCSI, Ethernet and serial ports later on.
-
-config MVME16x
- bool "MVME162, 166 and 167 support"
- depends on VME
- help
- Say Y to include support for Motorola VME boards. This will build a
- kernel which can run on MVME162, MVME166, MVME167, MVME172, and
- MVME177 boards. If you select this option you will have to select
- the appropriate drivers for SCSI, Ethernet and serial ports later
- on.
-
-config BVME6000
- bool "BVME4000 and BVME6000 support"
- depends on VME
- help
- Say Y to include support for VME boards from BVM Ltd. This will
- build a kernel which can run on BVME4000 and BVME6000 boards. If
- you select this option you will have to select the appropriate
- drivers for SCSI, Ethernet and serial ports later on.
-
-config HP300
- bool "HP9000/300 and HP9000/400 support"
- select MMU_MOTOROLA if MMU
- help
- This option enables support for the HP9000/300 and HP9000/400 series
- of workstations. Support for these machines is still somewhat
- experimental. If you plan to try to use the kernel on such a machine
- say Y here.
- Everybody else says N.
-
-config DIO
- bool "DIO bus support"
- depends on HP300
- default y
- help
- Say Y here to enable support for the "DIO" expansion bus used in
- HP300 machines. If you are using such a system you almost certainly
- want this.
-
-config SUN3X
- bool "Sun3x support"
- select MMU_MOTOROLA if MMU
- select M68030
- help
- This option enables support for the Sun 3x series of workstations.
- Be warned that this support is very experimental.
- Note that Sun 3x kernels are not compatible with Sun 3 hardware.
- General Linux information on the Sun 3x series (now discontinued)
- is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
-
- If you don't want to compile a kernel for a Sun 3x, say N.
-
-config Q40
- bool "Q40/Q60 support"
- select MMU_MOTOROLA if MMU
- help
- The Q40 is a Motorola 68040-based successor to the Sinclair QL
- manufactured in Germany. There is an official Q40 home page at
- <http://www.q40.de/>. This option enables support for the Q40 and
- Q60. Select your CPU below. For 68LC060 don't forget to enable FPU
- emulation.
-
-config SUN3
- bool "Sun3 support"
- depends on !MMU_MOTOROLA
- select MMU_SUN3 if MMU
- select M68020
- help
- This option enables support for the Sun 3 series of workstations
- (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
- that all other hardware types must be disabled, as Sun 3 kernels
- are incompatible with all other m68k targets (including Sun 3x!).
-
- If you don't want to compile a kernel exclusively for a Sun 3, say N.
-
-config NATFEAT
- bool "ARAnyM emulator support"
- depends on ATARI
- help
- This option enables support for ARAnyM native features, such as
- access to a disk image as /dev/hda.
-
-config NFBLOCK
- tristate "NatFeat block device support"
- depends on BLOCK && NATFEAT
- help
- Say Y to include support for the ARAnyM NatFeat block device
- which allows direct access to the hard drives without using
- the hardware emulation.
-
-config NFCON
- tristate "NatFeat console driver"
- depends on NATFEAT
- help
- Say Y to include support for the ARAnyM NatFeat console driver
- which allows the console output to be redirected to the stderr
- output of ARAnyM.
-
-config NFETH
- tristate "NatFeat Ethernet support"
- depends on NET_ETHERNET && NATFEAT
- help
- Say Y to include support for the ARAnyM NatFeat network device
- which will emulate a regular ethernet device while presenting an
- ethertap device to the host system.
-
-comment "Processor type"
-
-config M68020
- bool "68020 support"
- help
- If you anticipate running this kernel on a computer with a MC68020
- processor, say Y. Otherwise, say N. Note that the 68020 requires a
- 68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
- Sun 3, which provides its own version.
-
-config M68030
- bool "68030 support"
- depends on !MMU_SUN3
- help
- If you anticipate running this kernel on a computer with a MC68030
- processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
- work, as it does not include an MMU (Memory Management Unit).
-
-config M68040
- bool "68040 support"
- depends on !MMU_SUN3
- help
- If you anticipate running this kernel on a computer with a MC68LC040
- or MC68040 processor, say Y. Otherwise, say N. Note that an
- MC68EC040 will not work, as it does not include an MMU (Memory
- Management Unit).
-
-config M68060
- bool "68060 support"
- depends on !MMU_SUN3
- help
- If you anticipate running this kernel on a computer with a MC68060
- processor, say Y. Otherwise, say N.
-
-config MMU_MOTOROLA
- bool
-
-config MMU_SUN3
- bool
- depends on MMU && !MMU_MOTOROLA
-
-config M68KFPU_EMU
- bool "Math emulation support (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- help
- At some point in the future, this will cause floating-point math
- instructions to be emulated by the kernel on machines that lack a
- floating-point math coprocessor. Thrill-seekers and chronically
- sleep-deprived psychotic hacker types can say Y now, everyone else
- should probably wait a while.
-
-config M68KFPU_EMU_EXTRAPREC
- bool "Math emulation extra precision"
- depends on M68KFPU_EMU
- help
- The fpu uses normally a few bit more during calculations for
- correct rounding, the emulator can (often) do the same but this
- extra calculation can cost quite some time, so you can disable
- it here. The emulator will then "only" calculate with a 64 bit
- mantissa and round slightly incorrect, what is more than enough
- for normal usage.
-
-config M68KFPU_EMU_ONLY
- bool "Math emulation only kernel"
- depends on M68KFPU_EMU
- help
- This option prevents any floating-point instructions from being
- compiled into the kernel, thereby the kernel doesn't save any
- floating point context anymore during task switches, so this
- kernel will only be usable on machines without a floating-point
- math coprocessor. This makes the kernel a bit faster as no tests
- needs to be executed whether a floating-point instruction in the
- kernel should be executed or not.
-
-config ADVANCED
- bool "Advanced configuration options"
- ---help---
- This gives you access to some advanced options for the CPU. The
- defaults should be fine for most users, but these options may make
- it possible for you to improve performance somewhat if you know what
- you are doing.
-
- Note that the answer to this question won't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about these options.
-
- Most users should say N to this question.
-
-config RMW_INSNS
- bool "Use read-modify-write instructions"
- depends on ADVANCED
- ---help---
- This allows to use certain instructions that work with indivisible
- read-modify-write bus cycles. While this is faster than the
- workaround of disabling interrupts, it can conflict with DMA
- ( = direct memory access) on many Amiga systems, and it is also said
- to destabilize other machines. It is very likely that this will
- cause serious problems on any Amiga or Atari Medusa if set. The only
- configuration where it should work are 68030-based Ataris, where it
- apparently improves performance. But you've been warned! Unless you
- really know what you are doing, say N. Try Y only if you're quite
- adventurous.
-
-config SINGLE_MEMORY_CHUNK
- bool "Use one physical chunk of memory only" if ADVANCED && !SUN3
- default y if SUN3
- select NEED_MULTIPLE_NODES
- help
- Ignore all but the first contiguous chunk of physical memory for VM
- purposes. This will save a few bytes kernel size and may speed up
- some operations. Say N if not sure.
-
-config 060_WRITETHROUGH
- bool "Use write-through caching for 68060 supervisor accesses"
- depends on ADVANCED && M68060
- ---help---
- The 68060 generally uses copyback caching of recently accessed data.
- Copyback caching means that memory writes will be held in an on-chip
- cache and only written back to memory some time later. Saying Y
- here will force supervisor (kernel) accesses to use writethrough
- caching. Writethrough caching means that data is written to memory
- straight away, so that cache and memory data always agree.
- Writethrough caching is less efficient, but is needed for some
- drivers on 68060 based systems where the 68060 bus snooping signal
- is hardwired on. The 53c710 SCSI driver is known to suffer from
- this problem.
-
-config ARCH_DISCONTIGMEM_ENABLE
- def_bool !SINGLE_MEMORY_CHUNK
-
-config NODES_SHIFT
- int
- default "3"
- depends on !SINGLE_MEMORY_CHUNK
+if MMU
+source arch/m68k/Kconfig.mmu
+endif
+if !MMU
+source arch/m68k/Kconfig.nommu
+endif
source "mm/Kconfig"
endmenu
-menu "General setup"
+menu "Executable file formats"
source "fs/Kconfig.binfmt"
-config ZORRO
- bool "Amiga Zorro (AutoConfig) bus support"
- depends on AMIGA
- help
- This enables support for the Zorro bus in the Amiga. If you have
- expansion cards in your Amiga that conform to the Amiga
- AutoConfig(tm) specification, say Y, otherwise N. Note that even
- expansion cards that do not fit in the Zorro slots but fit in e.g.
- the CPU slot may fall in this category, so you have to say Y to let
- Linux use these.
+endmenu
-config AMIGA_PCMCIA
- bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)"
- depends on AMIGA && EXPERIMENTAL
- help
- Include support in the kernel for pcmcia on Amiga 1200 and Amiga
- 600. If you intend to use pcmcia cards say Y; otherwise say N.
+if !MMU
+menu "Power management options"
-config STRAM_PROC
- bool "ST-RAM statistics in /proc"
- depends on ATARI
- help
- Say Y here to report ST-RAM usage statistics in /proc/stram.
-
-config HEARTBEAT
- bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
- default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
- help
- Use the power-on LED on your machine as a load meter. The exact
- behavior is platform-dependent, but normally the flash frequency is
- a hyperbolic function of the 5-minute load average.
-
-# We have a dedicated heartbeat LED. :-)
-config PROC_HARDWARE
- bool "/proc/hardware support"
- help
- Say Y here to support the /proc/hardware file, which gives you
- access to information about the machine you're running on,
- including the model, CPU, MMU, clock speed, BogoMIPS rating,
- and memory size.
-
-config ISA
- bool
- depends on Q40 || AMIGA_PCMCIA
- default y
- help
- Find out whether you have ISA slots on your motherboard. ISA is the
- name of a bus system, i.e. the way the CPU talks to the other stuff
- inside your box. Other bus systems are PCI, EISA, MicroChannel
- (MCA) or VESA. ISA is an older system, now being displaced by PCI;
- newer boards don't support it. If you have ISA, say Y, otherwise N.
-
-config GENERIC_ISA_DMA
- bool
- depends on Q40 || AMIGA_PCMCIA
- default y
-
-config ZONE_DMA
- bool
- default y
-
-source "drivers/pci/Kconfig"
-
-source "drivers/zorro/Kconfig"
+config PM
+ bool "Power Management support"
+ help
+ Support processor power management modes
endmenu
+endif
source "net/Kconfig"
source "drivers/Kconfig"
+if MMU
+
menu "Character devices"
config ATARI_MFPSER
@@ -627,6 +235,8 @@
endmenu
+endif
+
source "fs/Kconfig"
source "arch/m68k/Kconfig.debug"