[ARM] 3430/1: ARM: OMAP: 5/8 Update PM
Patch from Tony Lindgren
Update OMAP PM code from linux-omap tree:
- Move PM code from plat-omap to mach-omap1 and mach-omap2
by Tony Lindgren
- Add minimal PM support for omap24xx by Tony Lindgren and
Richard Woodruff
- Misc updates to omap1 PM code by Tuukka Tikkanen et al
- Updates to the SRAM code needed for PM and FB by Imre Deak
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
new file mode 100644
index 0000000..ddf6b07
--- /dev/null
+++ b/arch/arm/mach-omap1/pm.c
@@ -0,0 +1,770 @@
+/*
+ * linux/arch/arm/mach-omap1/pm.c
+ *
+ * OMAP Power Management Routines
+ *
+ * Original code for the SA11x0:
+ * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
+ *
+ * Modified for the PXA250 by Nicolas Pitre:
+ * Copyright (c) 2002 Monta Vista Software, Inc.
+ *
+ * Modified for the OMAP1510 by David Singleton:
+ * Copyright (c) 2002 Monta Vista Software, Inc.
+ *
+ * Cleanup 2004 for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/pm.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/pm.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/atomic.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/irqs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/pm.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/tps65010.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/dsp_common.h>
+#include <asm/arch/dmtimer.h>
+
+static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
+static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
+static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
+static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE];
+static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
+static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
+
+static unsigned short enable_dyn_sleep = 1;
+
+static ssize_t omap_pm_sleep_while_idle_show(struct subsystem * subsys, char *buf)
+{
+ return sprintf(buf, "%hu\n", enable_dyn_sleep);
+}
+
+static ssize_t omap_pm_sleep_while_idle_store(struct subsystem * subsys,
+ const char * buf,
+ size_t n)
+{
+ unsigned short value;
+ if (sscanf(buf, "%hu", &value) != 1 ||
+ (value != 0 && value != 1)) {
+ printk(KERN_ERR "idle_sleep_store: Invalid value\n");
+ return -EINVAL;
+ }
+ enable_dyn_sleep = value;
+ return n;
+}
+
+static struct subsys_attribute sleep_while_idle_attr = {
+ .attr = {
+ .name = __stringify(sleep_while_idle),
+ .mode = 0644,
+ },
+ .show = omap_pm_sleep_while_idle_show,
+ .store = omap_pm_sleep_while_idle_store,
+};
+
+extern struct subsystem power_subsys;
+static void (*omap_sram_idle)(void) = NULL;
+static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
+
+/*
+ * Let's power down on idle, but only if we are really
+ * idle, because once we start down the path of
+ * going idle we continue to do idle even if we get
+ * a clock tick interrupt . .
+ */
+void omap_pm_idle(void)
+{
+ extern __u32 arm_idlect1_mask;
+ __u32 use_idlect1 = arm_idlect1_mask;
+#ifndef CONFIG_OMAP_MPU_TIMER
+ int do_sleep;
+#endif
+
+ local_irq_disable();
+ local_fiq_disable();
+ if (need_resched()) {
+ local_fiq_enable();
+ local_irq_enable();
+ return;
+ }
+
+ /*
+ * Since an interrupt may set up a timer, we don't want to
+ * reprogram the hardware timer with interrupts enabled.
+ * Re-enable interrupts only after returning from idle.
+ */
+ timer_dyn_reprogram();
+
+#ifdef CONFIG_OMAP_MPU_TIMER
+#warning Enable 32kHz OS timer in order to allow sleep states in idle
+ use_idlect1 = use_idlect1 & ~(1 << 9);
+#else
+
+ do_sleep = 0;
+ while (enable_dyn_sleep) {
+
+#ifdef CONFIG_CBUS_TAHVO_USB
+ extern int vbus_active;
+ /* Clock requirements? */
+ if (vbus_active)
+ break;
+#endif
+ do_sleep = 1;
+ break;
+ }
+
+#ifdef CONFIG_OMAP_DM_TIMER
+ use_idlect1 = omap_dm_timer_modify_idlect_mask(use_idlect1);
+#endif
+
+ if (omap_dma_running()) {
+ use_idlect1 &= ~(1 << 6);
+ if (omap_lcd_dma_ext_running())
+ use_idlect1 &= ~(1 << 12);
+ }
+
+ /* We should be able to remove the do_sleep variable and multiple
+ * tests above as soon as drivers, timer and DMA code have been fixed.
+ * Even the sleep block count should become obsolete. */
+ if ((use_idlect1 != ~0) || !do_sleep) {
+
+ __u32 saved_idlect1 = omap_readl(ARM_IDLECT1);
+ if (cpu_is_omap15xx())
+ use_idlect1 &= OMAP1510_BIG_SLEEP_REQUEST;
+ else
+ use_idlect1 &= OMAP1610_IDLECT1_SLEEP_VAL;
+ omap_writel(use_idlect1, ARM_IDLECT1);
+ __asm__ volatile ("mcr p15, 0, r0, c7, c0, 4");
+ omap_writel(saved_idlect1, ARM_IDLECT1);
+
+ local_fiq_enable();
+ local_irq_enable();
+ return;
+ }
+ omap_sram_suspend(omap_readl(ARM_IDLECT1),
+ omap_readl(ARM_IDLECT2));
+#endif
+
+ local_fiq_enable();
+ local_irq_enable();
+}
+
+/*
+ * Configuration of the wakeup event is board specific. For the
+ * moment we put it into this helper function. Later it may move
+ * to board specific files.
+ */
+static void omap_pm_wakeup_setup(void)
+{
+ u32 level1_wake = 0;
+ u32 level2_wake = OMAP_IRQ_BIT(INT_UART2);
+
+ /*
+ * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade,
+ * and the L2 wakeup interrupts: keypad and UART2. Note that the
+ * drivers must still separately call omap_set_gpio_wakeup() to
+ * wake up to a GPIO interrupt.
+ */
+ if (cpu_is_omap730())
+ level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) |
+ OMAP_IRQ_BIT(INT_730_IH2_IRQ);
+ else if (cpu_is_omap15xx())
+ level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
+ OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
+ else if (cpu_is_omap16xx())
+ level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
+ OMAP_IRQ_BIT(INT_1610_IH2_IRQ);
+
+ omap_writel(~level1_wake, OMAP_IH1_MIR);
+
+ if (cpu_is_omap730()) {
+ omap_writel(~level2_wake, OMAP_IH2_0_MIR);
+ omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) |
+ OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)),
+ OMAP_IH2_1_MIR);
+ } else if (cpu_is_omap15xx()) {
+ level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
+ omap_writel(~level2_wake, OMAP_IH2_MIR);
+ } else if (cpu_is_omap16xx()) {
+ level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
+ omap_writel(~level2_wake, OMAP_IH2_0_MIR);
+
+ /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */
+ omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ),
+ OMAP_IH2_1_MIR);
+ omap_writel(~0x0, OMAP_IH2_2_MIR);
+ omap_writel(~0x0, OMAP_IH2_3_MIR);
+ }
+
+ /* New IRQ agreement, recalculate in cascade order */
+ omap_writel(1, OMAP_IH2_CONTROL);
+ omap_writel(1, OMAP_IH1_CONTROL);
+}
+
+#define EN_DSPCK 13 /* ARM_CKCTL */
+#define EN_APICK 6 /* ARM_IDLECT2 */
+#define DSP_EN 1 /* ARM_RSTCT1 */
+
+void omap_pm_suspend(void)
+{
+ unsigned long arg0 = 0, arg1 = 0;
+
+ printk("PM: OMAP%x is trying to enter deep sleep...\n", system_rev);
+
+ omap_serial_wake_trigger(1);
+
+ if (machine_is_omap_osk()) {
+ /* Stop LED1 (D9) blink */
+ tps65010_set_led(LED1, OFF);
+ }
+
+ omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
+
+ /*
+ * Step 1: turn off interrupts (FIXME: NOTE: already disabled)
+ */
+
+ local_irq_disable();
+ local_fiq_disable();
+
+ /*
+ * Step 2: save registers
+ *
+ * The omap is a strange/beautiful device. The caches, memory
+ * and register state are preserved across power saves.
+ * We have to save and restore very little register state to
+ * idle the omap.
+ *
+ * Save interrupt, MPUI, ARM and UPLD control registers.
+ */
+
+ if (cpu_is_omap730()) {
+ MPUI730_SAVE(OMAP_IH1_MIR);
+ MPUI730_SAVE(OMAP_IH2_0_MIR);
+ MPUI730_SAVE(OMAP_IH2_1_MIR);
+ MPUI730_SAVE(MPUI_CTRL);
+ MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
+ MPUI730_SAVE(MPUI_DSP_API_CONFIG);
+ MPUI730_SAVE(EMIFS_CONFIG);
+ MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
+
+ } else if (cpu_is_omap15xx()) {
+ MPUI1510_SAVE(OMAP_IH1_MIR);
+ MPUI1510_SAVE(OMAP_IH2_MIR);
+ MPUI1510_SAVE(MPUI_CTRL);
+ MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
+ MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
+ MPUI1510_SAVE(EMIFS_CONFIG);
+ MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
+ } else if (cpu_is_omap16xx()) {
+ MPUI1610_SAVE(OMAP_IH1_MIR);
+ MPUI1610_SAVE(OMAP_IH2_0_MIR);
+ MPUI1610_SAVE(OMAP_IH2_1_MIR);
+ MPUI1610_SAVE(OMAP_IH2_2_MIR);
+ MPUI1610_SAVE(OMAP_IH2_3_MIR);
+ MPUI1610_SAVE(MPUI_CTRL);
+ MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
+ MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
+ MPUI1610_SAVE(EMIFS_CONFIG);
+ MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
+ }
+
+ ARM_SAVE(ARM_CKCTL);
+ ARM_SAVE(ARM_IDLECT1);
+ ARM_SAVE(ARM_IDLECT2);
+ if (!(cpu_is_omap15xx()))
+ ARM_SAVE(ARM_IDLECT3);
+ ARM_SAVE(ARM_EWUPCT);
+ ARM_SAVE(ARM_RSTCT1);
+ ARM_SAVE(ARM_RSTCT2);
+ ARM_SAVE(ARM_SYSST);
+ ULPD_SAVE(ULPD_CLOCK_CTRL);
+ ULPD_SAVE(ULPD_STATUS_REQ);
+
+ /* (Step 3 removed - we now allow deep sleep by default) */
+
+ /*
+ * Step 4: OMAP DSP Shutdown
+ */
+
+ /* stop DSP */
+ omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1);
+
+ /* shut down dsp_ck */
+ omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
+
+ /* temporarily enabling api_ck to access DSP registers */
+ omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2);
+
+ /* save DSP registers */
+ DSP_SAVE(DSP_IDLECT2);
+
+ /* Stop all DSP domain clocks */
+ __raw_writew(0, DSP_IDLECT2);
+
+ /*
+ * Step 5: Wakeup Event Setup
+ */
+
+ omap_pm_wakeup_setup();
+
+ /*
+ * Step 6: ARM and Traffic controller shutdown
+ */
+
+ /* disable ARM watchdog */
+ omap_writel(0x00F5, OMAP_WDT_TIMER_MODE);
+ omap_writel(0x00A0, OMAP_WDT_TIMER_MODE);
+
+ /*
+ * Step 6b: ARM and Traffic controller shutdown
+ *
+ * Step 6 continues here. Prepare jump to power management
+ * assembly code in internal SRAM.
+ *
+ * Since the omap_cpu_suspend routine has been copied to
+ * SRAM, we'll do an indirect procedure call to it and pass the
+ * contents of arm_idlect1 and arm_idlect2 so it can restore
+ * them when it wakes up and it will return.
+ */
+
+ arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1];
+ arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2];
+
+ /*
+ * Step 6c: ARM and Traffic controller shutdown
+ *
+ * Jump to assembly code. The processor will stay there
+ * until wake up.
+ */
+ omap_sram_suspend(arg0, arg1);
+
+ /*
+ * If we are here, processor is woken up!
+ */
+
+ /*
+ * Restore DSP clocks
+ */
+
+ /* again temporarily enabling api_ck to access DSP registers */
+ omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2);
+
+ /* Restore DSP domain clocks */
+ DSP_RESTORE(DSP_IDLECT2);
+
+ /*
+ * Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did
+ */
+
+ if (!(cpu_is_omap15xx()))
+ ARM_RESTORE(ARM_IDLECT3);
+ ARM_RESTORE(ARM_CKCTL);
+ ARM_RESTORE(ARM_EWUPCT);
+ ARM_RESTORE(ARM_RSTCT1);
+ ARM_RESTORE(ARM_RSTCT2);
+ ARM_RESTORE(ARM_SYSST);
+ ULPD_RESTORE(ULPD_CLOCK_CTRL);
+ ULPD_RESTORE(ULPD_STATUS_REQ);
+
+ if (cpu_is_omap730()) {
+ MPUI730_RESTORE(EMIFS_CONFIG);
+ MPUI730_RESTORE(EMIFF_SDRAM_CONFIG);
+ MPUI730_RESTORE(OMAP_IH1_MIR);
+ MPUI730_RESTORE(OMAP_IH2_0_MIR);
+ MPUI730_RESTORE(OMAP_IH2_1_MIR);
+ } else if (cpu_is_omap15xx()) {
+ MPUI1510_RESTORE(MPUI_CTRL);
+ MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
+ MPUI1510_RESTORE(MPUI_DSP_API_CONFIG);
+ MPUI1510_RESTORE(EMIFS_CONFIG);
+ MPUI1510_RESTORE(EMIFF_SDRAM_CONFIG);
+ MPUI1510_RESTORE(OMAP_IH1_MIR);
+ MPUI1510_RESTORE(OMAP_IH2_MIR);
+ } else if (cpu_is_omap16xx()) {
+ MPUI1610_RESTORE(MPUI_CTRL);
+ MPUI1610_RESTORE(MPUI_DSP_BOOT_CONFIG);
+ MPUI1610_RESTORE(MPUI_DSP_API_CONFIG);
+ MPUI1610_RESTORE(EMIFS_CONFIG);
+ MPUI1610_RESTORE(EMIFF_SDRAM_CONFIG);
+
+ MPUI1610_RESTORE(OMAP_IH1_MIR);
+ MPUI1610_RESTORE(OMAP_IH2_0_MIR);
+ MPUI1610_RESTORE(OMAP_IH2_1_MIR);
+ MPUI1610_RESTORE(OMAP_IH2_2_MIR);
+ MPUI1610_RESTORE(OMAP_IH2_3_MIR);
+ }
+
+ omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
+
+ /*
+ * Reenable interrupts
+ */
+
+ local_irq_enable();
+ local_fiq_enable();
+
+ omap_serial_wake_trigger(0);
+
+ printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev);
+
+ if (machine_is_omap_osk()) {
+ /* Let LED1 (D9) blink again */
+ tps65010_set_led(LED1, BLINK);
+ }
+}
+
+#if defined(DEBUG) && defined(CONFIG_PROC_FS)
+static int g_read_completed;
+
+/*
+ * Read system PM registers for debugging
+ */
+static int omap_pm_read_proc(
+ char *page_buffer,
+ char **my_first_byte,
+ off_t virtual_start,
+ int length,
+ int *eof,
+ void *data)
+{
+ int my_buffer_offset = 0;
+ char * const my_base = page_buffer;
+
+ ARM_SAVE(ARM_CKCTL);
+ ARM_SAVE(ARM_IDLECT1);
+ ARM_SAVE(ARM_IDLECT2);
+ if (!(cpu_is_omap15xx()))
+ ARM_SAVE(ARM_IDLECT3);
+ ARM_SAVE(ARM_EWUPCT);
+ ARM_SAVE(ARM_RSTCT1);
+ ARM_SAVE(ARM_RSTCT2);
+ ARM_SAVE(ARM_SYSST);
+
+ ULPD_SAVE(ULPD_IT_STATUS);
+ ULPD_SAVE(ULPD_CLOCK_CTRL);
+ ULPD_SAVE(ULPD_SOFT_REQ);
+ ULPD_SAVE(ULPD_STATUS_REQ);
+ ULPD_SAVE(ULPD_DPLL_CTRL);
+ ULPD_SAVE(ULPD_POWER_CTRL);
+
+ if (cpu_is_omap730()) {
+ MPUI730_SAVE(MPUI_CTRL);
+ MPUI730_SAVE(MPUI_DSP_STATUS);
+ MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
+ MPUI730_SAVE(MPUI_DSP_API_CONFIG);
+ MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
+ MPUI730_SAVE(EMIFS_CONFIG);
+ } else if (cpu_is_omap15xx()) {
+ MPUI1510_SAVE(MPUI_CTRL);
+ MPUI1510_SAVE(MPUI_DSP_STATUS);
+ MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
+ MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
+ MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
+ MPUI1510_SAVE(EMIFS_CONFIG);
+ } else if (cpu_is_omap16xx()) {
+ MPUI1610_SAVE(MPUI_CTRL);
+ MPUI1610_SAVE(MPUI_DSP_STATUS);
+ MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
+ MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
+ MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
+ MPUI1610_SAVE(EMIFS_CONFIG);
+ }
+
+ if (virtual_start == 0) {
+ g_read_completed = 0;
+
+ my_buffer_offset += sprintf(my_base + my_buffer_offset,
+ "ARM_CKCTL_REG: 0x%-8x \n"
+ "ARM_IDLECT1_REG: 0x%-8x \n"
+ "ARM_IDLECT2_REG: 0x%-8x \n"
+ "ARM_IDLECT3_REG: 0x%-8x \n"
+ "ARM_EWUPCT_REG: 0x%-8x \n"
+ "ARM_RSTCT1_REG: 0x%-8x \n"
+ "ARM_RSTCT2_REG: 0x%-8x \n"
+ "ARM_SYSST_REG: 0x%-8x \n"
+ "ULPD_IT_STATUS_REG: 0x%-4x \n"
+ "ULPD_CLOCK_CTRL_REG: 0x%-4x \n"
+ "ULPD_SOFT_REQ_REG: 0x%-4x \n"
+ "ULPD_DPLL_CTRL_REG: 0x%-4x \n"
+ "ULPD_STATUS_REQ_REG: 0x%-4x \n"
+ "ULPD_POWER_CTRL_REG: 0x%-4x \n",
+ ARM_SHOW(ARM_CKCTL),
+ ARM_SHOW(ARM_IDLECT1),
+ ARM_SHOW(ARM_IDLECT2),
+ ARM_SHOW(ARM_IDLECT3),
+ ARM_SHOW(ARM_EWUPCT),
+ ARM_SHOW(ARM_RSTCT1),
+ ARM_SHOW(ARM_RSTCT2),
+ ARM_SHOW(ARM_SYSST),
+ ULPD_SHOW(ULPD_IT_STATUS),
+ ULPD_SHOW(ULPD_CLOCK_CTRL),
+ ULPD_SHOW(ULPD_SOFT_REQ),
+ ULPD_SHOW(ULPD_DPLL_CTRL),
+ ULPD_SHOW(ULPD_STATUS_REQ),
+ ULPD_SHOW(ULPD_POWER_CTRL));
+
+ if (cpu_is_omap730()) {
+ my_buffer_offset += sprintf(my_base + my_buffer_offset,
+ "MPUI730_CTRL_REG 0x%-8x \n"
+ "MPUI730_DSP_STATUS_REG: 0x%-8x \n"
+ "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
+ "MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n"
+ "MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n"
+ "MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n",
+ MPUI730_SHOW(MPUI_CTRL),
+ MPUI730_SHOW(MPUI_DSP_STATUS),
+ MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG),
+ MPUI730_SHOW(MPUI_DSP_API_CONFIG),
+ MPUI730_SHOW(EMIFF_SDRAM_CONFIG),
+ MPUI730_SHOW(EMIFS_CONFIG));
+ } else if (cpu_is_omap15xx()) {
+ my_buffer_offset += sprintf(my_base + my_buffer_offset,
+ "MPUI1510_CTRL_REG 0x%-8x \n"
+ "MPUI1510_DSP_STATUS_REG: 0x%-8x \n"
+ "MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
+ "MPUI1510_DSP_API_CONFIG_REG: 0x%-8x \n"
+ "MPUI1510_SDRAM_CONFIG_REG: 0x%-8x \n"
+ "MPUI1510_EMIFS_CONFIG_REG: 0x%-8x \n",
+ MPUI1510_SHOW(MPUI_CTRL),
+ MPUI1510_SHOW(MPUI_DSP_STATUS),
+ MPUI1510_SHOW(MPUI_DSP_BOOT_CONFIG),
+ MPUI1510_SHOW(MPUI_DSP_API_CONFIG),
+ MPUI1510_SHOW(EMIFF_SDRAM_CONFIG),
+ MPUI1510_SHOW(EMIFS_CONFIG));
+ } else if (cpu_is_omap16xx()) {
+ my_buffer_offset += sprintf(my_base + my_buffer_offset,
+ "MPUI1610_CTRL_REG 0x%-8x \n"
+ "MPUI1610_DSP_STATUS_REG: 0x%-8x \n"
+ "MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
+ "MPUI1610_DSP_API_CONFIG_REG: 0x%-8x \n"
+ "MPUI1610_SDRAM_CONFIG_REG: 0x%-8x \n"
+ "MPUI1610_EMIFS_CONFIG_REG: 0x%-8x \n",
+ MPUI1610_SHOW(MPUI_CTRL),
+ MPUI1610_SHOW(MPUI_DSP_STATUS),
+ MPUI1610_SHOW(MPUI_DSP_BOOT_CONFIG),
+ MPUI1610_SHOW(MPUI_DSP_API_CONFIG),
+ MPUI1610_SHOW(EMIFF_SDRAM_CONFIG),
+ MPUI1610_SHOW(EMIFS_CONFIG));
+ }
+
+ g_read_completed++;
+ } else if (g_read_completed >= 1) {
+ *eof = 1;
+ return 0;
+ }
+ g_read_completed++;
+
+ *my_first_byte = page_buffer;
+ return my_buffer_offset;
+}
+
+static void omap_pm_init_proc(void)
+{
+ struct proc_dir_entry *entry;
+
+ entry = create_proc_read_entry("driver/omap_pm",
+ S_IWUSR | S_IRUGO, NULL,
+ omap_pm_read_proc, NULL);
+}
+
+#endif /* DEBUG && CONFIG_PROC_FS */
+
+static void (*saved_idle)(void) = NULL;
+
+/*
+ * omap_pm_prepare - Do preliminary suspend work.
+ * @state: suspend state we're entering.
+ *
+ */
+static int omap_pm_prepare(suspend_state_t state)
+{
+ int error = 0;
+
+ /* We cannot sleep in idle until we have resumed */
+ saved_idle = pm_idle;
+ pm_idle = NULL;
+
+ switch (state)
+ {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ break;
+
+ case PM_SUSPEND_DISK:
+ return -ENOTSUPP;
+
+ default:
+ return -EINVAL;
+ }
+
+ return error;
+}
+
+
+/*
+ * omap_pm_enter - Actually enter a sleep state.
+ * @state: State we're entering.
+ *
+ */
+
+static int omap_pm_enter(suspend_state_t state)
+{
+ switch (state)
+ {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ omap_pm_suspend();
+ break;
+
+ case PM_SUSPEND_DISK:
+ return -ENOTSUPP;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+/**
+ * omap_pm_finish - Finish up suspend sequence.
+ * @state: State we're coming out of.
+ *
+ * This is called after we wake back up (or if entering the sleep state
+ * failed).
+ */
+
+static int omap_pm_finish(suspend_state_t state)
+{
+ pm_idle = saved_idle;
+ return 0;
+}
+
+
+static irqreturn_t omap_wakeup_interrupt(int irq, void * dev,
+ struct pt_regs * regs)
+{
+ return IRQ_HANDLED;
+}
+
+static struct irqaction omap_wakeup_irq = {
+ .name = "peripheral wakeup",
+ .flags = SA_INTERRUPT,
+ .handler = omap_wakeup_interrupt
+};
+
+
+
+static struct pm_ops omap_pm_ops ={
+ .pm_disk_mode = 0,
+ .prepare = omap_pm_prepare,
+ .enter = omap_pm_enter,
+ .finish = omap_pm_finish,
+};
+
+static int __init omap_pm_init(void)
+{
+ printk("Power Management for TI OMAP.\n");
+
+ /*
+ * We copy the assembler sleep/wakeup routines to SRAM.
+ * These routines need to be in SRAM as that's the only
+ * memory the MPU can see when it wakes up.
+ */
+ if (cpu_is_omap730()) {
+ omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend,
+ omap730_idle_loop_suspend_sz);
+ omap_sram_suspend = omap_sram_push(omap730_cpu_suspend,
+ omap730_cpu_suspend_sz);
+ } else if (cpu_is_omap15xx()) {
+ omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend,
+ omap1510_idle_loop_suspend_sz);
+ omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
+ omap1510_cpu_suspend_sz);
+ } else if (cpu_is_omap16xx()) {
+ omap_sram_idle = omap_sram_push(omap1610_idle_loop_suspend,
+ omap1610_idle_loop_suspend_sz);
+ omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend,
+ omap1610_cpu_suspend_sz);
+ }
+
+ if (omap_sram_idle == NULL || omap_sram_suspend == NULL) {
+ printk(KERN_ERR "PM not initialized: Missing SRAM support\n");
+ return -ENODEV;
+ }
+
+ pm_idle = omap_pm_idle;
+
+ if (cpu_is_omap730())
+ setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
+ else if (cpu_is_omap16xx())
+ setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+
+ /* Program new power ramp-up time
+ * (0 for most boards since we don't lower voltage when in deep sleep)
+ */
+ omap_writew(ULPD_SETUP_ANALOG_CELL_3_VAL, ULPD_SETUP_ANALOG_CELL_3);
+
+ /* Setup ULPD POWER_CTRL_REG - enter deep sleep whenever possible */
+ omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
+
+ /* Configure IDLECT3 */
+ if (cpu_is_omap730())
+ omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3);
+ else if (cpu_is_omap16xx())
+ omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
+
+ pm_set_ops(&omap_pm_ops);
+
+#if defined(DEBUG) && defined(CONFIG_PROC_FS)
+ omap_pm_init_proc();
+#endif
+
+ subsys_create_file(&power_subsys, &sleep_while_idle_attr);
+
+ if (cpu_is_omap16xx()) {
+ /* configure LOW_PWR pin */
+ omap_cfg_reg(T20_1610_LOW_PWR);
+ }
+
+ return 0;
+}
+__initcall(omap_pm_init);
diff --git a/arch/arm/plat-omap/sleep.S b/arch/arm/mach-omap1/sleep.S
similarity index 92%
rename from arch/arm/plat-omap/sleep.S
rename to arch/arm/mach-omap1/sleep.S
index 4cd7d29..e58295e 100644
--- a/arch/arm/plat-omap/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/plat-omap/sleep.S
+ * linux/arch/arm/mach-omap1/sleep.S
*
* Low-level OMAP730/1510/1610 sleep/wakeUp support
*
@@ -383,60 +383,133 @@
mcr p15, 0, r0, c7, c10, 4
nop
- @ load base address of Traffic Controller
+ @ Load base address of Traffic Controller
mov r6, #TCMIF_ASM_BASE & 0xff000000
orr r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
orr r6, r6, #TCMIF_ASM_BASE & 0x0000ff00
- @ prepare to put SDRAM into self-refresh manually
+ @ Prepare to put SDRAM into self-refresh manually
ldr r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
orr r9, r7, #SELF_REFRESH_MODE & 0xff000000
orr r9, r9, #SELF_REFRESH_MODE & 0x000000ff
str r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
- @ prepare to put EMIFS to Sleep
+ @ Prepare to put EMIFS to Sleep
ldr r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
orr r9, r8, #IDLE_EMIFS_REQUEST & 0xff
str r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
- @ load base address of ARM_IDLECT1 and ARM_IDLECT2
+ @ Load base address of ARM_IDLECT1 and ARM_IDLECT2
mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000
orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
- @ turn off clock domains
- @ do not disable PERCK (0x04)
+ @ Turn off clock domains
+ @ Do not disable PERCK (0x04)
mov r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff
orr r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00
strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
- @ request ARM idle
+ @ Request ARM idle
mov r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff
orr r3, r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff00
strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
- @ disable instruction cache
- mrc p15, 0, r9, c1, c0, 0
- bic r2, r9, #0x1000
- mcr p15, 0, r2, c1, c0, 0
- nop
-
/*
* Let's wait for the next wake up event to wake us up. r0 can't be
* used here because r0 holds ARM_IDLECT1
*/
mov r2, #0
mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
+
+ @ Errata (HEL3SU467, section 1.4.4) specifies nop-instructions
+ @ according to this formula:
+ @ 2 + (4*DPLL_MULT)/DPLL_DIV/ARMDIV
+ @ Max DPLL_MULT = 18
+ @ DPLL_DIV = 1
+ @ ARMDIV = 1
+ @ => 74 nop-instructions
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop @10
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop @20
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop @30
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop @40
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop @50
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop @60
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop @70
+ nop
+ nop
+ nop
+ nop @74
/*
* omap1610_cpu_suspend()'s resume point.
*
* It will just start executing here, so we'll restore stuff from the
* stack.
*/
- @ re-enable Icache
- mcr p15, 0, r9, c1, c0, 0
-
- @ reset the ARM_IDLECT1 and ARM_IDLECT2.
+ @ Restore the ARM_IDLECT1 and ARM_IDLECT2.
strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
@@ -444,7 +517,7 @@
str r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
str r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
- @ restore regs and return
+ @ Restore regs and return
ldmfd sp!, {r0 - r12, pc}
ENTRY(omap1610_cpu_suspend_sz)
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
new file mode 100644
index 0000000..562168f
--- /dev/null
+++ b/arch/arm/mach-omap2/pm.c
@@ -0,0 +1,149 @@
+/*
+ * linux/arch/arm/mach-omap2/pm.c
+ *
+ * OMAP2 Power Management Routines
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pm.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/pm.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/atomic.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/irqs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
+#include <asm/arch/pm.h>
+
+static struct clk *vclk;
+static void (*omap2_sram_idle)(void);
+static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
+static void (*saved_idle)(void);
+
+void omap2_pm_idle(void)
+{
+ local_irq_disable();
+ local_fiq_disable();
+ if (need_resched()) {
+ local_fiq_enable();
+ local_irq_enable();
+ return;
+ }
+
+ /*
+ * Since an interrupt may set up a timer, we don't want to
+ * reprogram the hardware timer with interrupts enabled.
+ * Re-enable interrupts only after returning from idle.
+ */
+ timer_dyn_reprogram();
+
+ omap2_sram_idle();
+ local_fiq_enable();
+ local_irq_enable();
+}
+
+static int omap2_pm_prepare(suspend_state_t state)
+{
+ int error = 0;
+
+ /* We cannot sleep in idle until we have resumed */
+ saved_idle = pm_idle;
+ pm_idle = NULL;
+
+ switch (state)
+ {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ break;
+
+ case PM_SUSPEND_DISK:
+ return -ENOTSUPP;
+
+ default:
+ return -EINVAL;
+ }
+
+ return error;
+}
+
+static int omap2_pm_enter(suspend_state_t state)
+{
+ switch (state)
+ {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ /* FIXME: Add suspend */
+ break;
+
+ case PM_SUSPEND_DISK:
+ return -ENOTSUPP;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int omap2_pm_finish(suspend_state_t state)
+{
+ pm_idle = saved_idle;
+ return 0;
+}
+
+static struct pm_ops omap_pm_ops = {
+ .pm_disk_mode = 0,
+ .prepare = omap2_pm_prepare,
+ .enter = omap2_pm_enter,
+ .finish = omap2_pm_finish,
+};
+
+int __init omap2_pm_init(void)
+{
+ printk("Power Management for TI OMAP.\n");
+
+ vclk = clk_get(NULL, "virt_prcm_set");
+ if (IS_ERR(vclk)) {
+ printk(KERN_ERR "Could not get PM vclk\n");
+ return -ENODEV;
+ }
+
+ /*
+ * We copy the assembler sleep/wakeup routines to SRAM.
+ * These routines need to be in SRAM as that's the only
+ * memory the MPU can see when it wakes up.
+ */
+ omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
+ omap24xx_idle_loop_suspend_sz);
+
+ omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
+ omap24xx_cpu_suspend_sz);
+
+ pm_set_ops(&omap_pm_ops);
+ pm_idle = omap2_pm_idle;
+
+ return 0;
+}
+
+__initcall(omap2_pm_init);
diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep.S
new file mode 100644
index 0000000..00299cb
--- /dev/null
+++ b/arch/arm/mach-omap2/sleep.S
@@ -0,0 +1,144 @@
+/*
+ * linux/arch/arm/mach-omap2/sleep.S
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/arch/io.h>
+#include <asm/arch/pm.h>
+
+#define A_32KSYNC_CR_V IO_ADDRESS(OMAP_TIMER32K_BASE+0x10)
+#define A_PRCM_VOLTCTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x50)
+#define A_PRCM_CLKCFG_CTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x80)
+#define A_CM_CLKEN_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x500)
+#define A_CM_IDLEST_CKGEN_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x520)
+#define A_CM_CLKSEL1_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x540)
+#define A_CM_CLKSEL2_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x544)
+
+#define A_SDRC_DLLA_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0x60)
+#define A_SDRC_POWER_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0x70)
+#define A_SDRC_RFR_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0xA4)
+#define A_SDRC0_V (0xC0000000)
+#define A_SDRC_MANUAL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0xA8)
+
+ .text
+
+/*
+ * Forces OMAP into idle state
+ *
+ * omap24xx_idle_loop_suspend() - This bit of code just executes the WFI
+ * for normal idles.
+ *
+ * Note: This code get's copied to internal SRAM at boot. When the OMAP
+ * wakes up it continues execution at the point it went to sleep.
+ */
+ENTRY(omap24xx_idle_loop_suspend)
+ stmfd sp!, {r0, lr} @ save registers on stack
+ mov r0, #0 @ clear for mcr setup
+ mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
+ ldmfd sp!, {r0, pc} @ restore regs and return
+
+ENTRY(omap24xx_idle_loop_suspend_sz)
+ .word . - omap24xx_idle_loop_suspend
+
+/*
+ * omap242x_cpu_suspend() - Forces OMAP into deep sleep state by completing
+ * SDRC shutdown then ARM shutdown. Upon wake MPU is back on so just restore
+ * SDRC.
+ *
+ * Input:
+ * R0 : DLL ctrl value pre-Sleep
+ * R1 : Processor+Revision
+ * 2420: 0x21 = 242xES1, 0x26 = 242xES2.2
+ * 2430: 0x31 = 2430ES1, 0x32 = 2430ES2
+ *
+ * The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on
+ * when we get called, but the DLL probably isn't. We will wait a bit more in
+ * case the DPLL isn't quite there yet. The code will wait on DLL for DDR even
+ * if in unlocked mode.
+ *
+ * For less than 242x-ES2.2 upon wake from a sleep mode where the external
+ * oscillator was stopped, a timing bug exists where a non-stabilized 12MHz
+ * clock can pass into the PRCM can cause problems at DSP and IVA.
+ * To work around this the code will switch to the 32kHz source prior to sleep.
+ * Post sleep we will shift back to using the DPLL. Apparently,
+ * CM_IDLEST_CLKGEN does not reflect the full clock change so you need to wait
+ * 3x12MHz + 3x32kHz clocks for a full switch.
+ *
+ * The DLL load value is not kept in RETENTION or OFF. It needs to be restored
+ * at wake
+ */
+ENTRY(omap24xx_cpu_suspend)
+ stmfd sp!, {r0 - r12, lr} @ save registers on stack
+ mov r3, #0x0 @ clear for mrc call
+ mcr p15, 0, r3, c7, c10, 4 @ memory barrier, hope SDR/DDR finished
+ nop
+ nop
+ ldr r3, A_SDRC_POWER @ addr of sdrc power
+ ldr r4, [r3] @ value of sdrc power
+ orr r4, r4, #0x40 @ enable self refresh on idle req
+ mov r5, #0x2000 @ set delay (DPLL relock + DLL relock)
+ str r4, [r3] @ make it so
+ mov r2, #0
+ nop
+ mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
+ nop
+loop:
+ subs r5, r5, #0x1 @ awake, wait just a bit
+ bne loop
+
+ /* The DPLL has on before we take the DDR out of self refresh */
+ bic r4, r4, #0x40 @ now clear self refresh bit.
+ str r4, [r3] @ put vlaue back.
+ ldr r4, A_SDRC0 @ make a clock happen
+ ldr r4, [r4]
+ nop @ start auto refresh only after clk ok
+ movs r0, r0 @ see if DDR or SDR
+ ldrne r1, A_SDRC_DLLA_CTRL_S @ get addr of DLL ctrl
+ strne r0, [r1] @ rewrite DLLA to force DLL reload
+ addne r1, r1, #0x8 @ move to DLLB
+ strne r0, [r1] @ rewrite DLLB to force DLL reload
+
+ mov r5, #0x1000
+loop2:
+ subs r5, r5, #0x1
+ bne loop2
+ /* resume*/
+ ldmfd sp!, {r0 - r12, pc} @ restore regs and return
+
+A_SDRC_POWER:
+ .word A_SDRC_POWER_V
+A_SDRC0:
+ .word A_SDRC0_V
+A_CM_CLKSEL2_PLL_S:
+ .word A_CM_CLKSEL2_PLL_V
+A_CM_CLKEN_PLL:
+ .word A_CM_CLKEN_PLL_V
+A_SDRC_DLLA_CTRL_S:
+ .word A_SDRC_DLLA_CTRL_V
+A_SDRC_MANUAL_S:
+ .word A_SDRC_MANUAL_V
+
+ENTRY(omap24xx_cpu_suspend_sz)
+ .word . - omap24xx_cpu_suspend
+
diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram-fn.S
index 2a869e2..d261e4f 100644
--- a/arch/arm/mach-omap2/sram-fn.S
+++ b/arch/arm/mach-omap2/sram-fn.S
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-omap1/sram.S
+ * linux/arch/arm/mach-omap2/sram.S
*
* Omap2 specific functions that need to be run in internal SRAM
*
@@ -28,7 +28,7 @@
#include <asm/arch/io.h>
#include <asm/hardware.h>
-#include <asm/arch/prcm.h>
+#include "prcm-regs.h"
#define TIMER_32KSYNCT_CR_V IO_ADDRESS(OMAP24XX_32KSYNCT_BASE + 0x010)
diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c
index 093efd7..1a24e2c 100644
--- a/arch/arm/plat-omap/pm.c
+++ b/arch/arm/plat-omap/pm.c
@@ -38,6 +38,7 @@
#include <linux/pm.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
+#include <linux/pm.h>
#include <linux/interrupt.h>
#include <asm/io.h>
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index ee82763..b7bf09b 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -16,24 +16,94 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <asm/mach/map.h>
#include <asm/tlb.h>
#include <asm/io.h>
#include <asm/cacheflush.h>
+#include <asm/mach/map.h>
+
#include <asm/arch/sram.h>
+#include <asm/arch/board.h>
#define OMAP1_SRAM_PA 0x20000000
#define OMAP1_SRAM_VA 0xd0000000
#define OMAP2_SRAM_PA 0x40200000
+#define OMAP2_SRAM_PUB_PA 0x4020f800
#define OMAP2_SRAM_VA 0xd0000000
+#define OMAP2_SRAM_PUB_VA 0xd0000800
+#if defined(CONFIG_ARCH_OMAP24XX)
+#define SRAM_BOOTLOADER_SZ 0x00
+#else
#define SRAM_BOOTLOADER_SZ 0x80
+#endif
+
+#define VA_REQINFOPERM0 IO_ADDRESS(0x68005048)
+#define VA_READPERM0 IO_ADDRESS(0x68005050)
+#define VA_WRITEPERM0 IO_ADDRESS(0x68005058)
+#define VA_CONTROL_STAT IO_ADDRESS(0x480002F8)
+#define GP_DEVICE 0x300
+#define TYPE_MASK 0x700
+
+#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
static unsigned long omap_sram_base;
static unsigned long omap_sram_size;
static unsigned long omap_sram_ceil;
+unsigned long omap_fb_sram_start;
+unsigned long omap_fb_sram_size;
+
+/* Depending on the target RAMFS firewall setup, the public usable amount of
+ * SRAM varies. The default accessable size for all device types is 2k. A GP
+ * device allows ARM11 but not other initators for full size. This
+ * functionality seems ok until some nice security API happens.
+ */
+static int is_sram_locked(void)
+{
+ int type = 0;
+
+ if (cpu_is_omap242x())
+ type = __raw_readl(VA_CONTROL_STAT) & TYPE_MASK;
+
+ if (type == GP_DEVICE) {
+ /* RAMFW: R/W access to all initators for all qualifier sets */
+ if (cpu_is_omap242x()) {
+ __raw_writel(0xFF, VA_REQINFOPERM0); /* all q-vects */
+ __raw_writel(0xCFDE, VA_READPERM0); /* all i-read */
+ __raw_writel(0xCFDE, VA_WRITEPERM0); /* all i-write */
+ }
+ return 0;
+ } else
+ return 1; /* assume locked with no PPA or security driver */
+}
+
+void get_fb_sram_conf(unsigned long start_avail, unsigned size_avail,
+ unsigned long *start, unsigned long *size)
+{
+ const struct omap_fbmem_config *fbmem_conf;
+
+ fbmem_conf = omap_get_config(OMAP_TAG_FBMEM, struct omap_fbmem_config);
+ if (fbmem_conf != NULL) {
+ *start = fbmem_conf->fb_sram_start;
+ *size = fbmem_conf->fb_sram_size;
+ } else {
+ *size = 0;
+ *start = 0;
+ }
+
+ if (*size && (
+ *start < start_avail ||
+ *start + *size > start_avail + size_avail)) {
+ printk(KERN_ERR "invalid FB SRAM configuration\n");
+ *start = start_avail;
+ *size = size_avail;
+ }
+
+ if (*size)
+ pr_info("Reserving %lu bytes SRAM for frame buffer\n", *size);
+}
+
/*
* The amount of SRAM depends on the core type.
* Note that we cannot try to test for SRAM here because writes
@@ -42,26 +112,45 @@
*/
void __init omap_detect_sram(void)
{
- if (!cpu_is_omap24xx())
+ unsigned long sram_start;
+
+ if (cpu_is_omap24xx()) {
+ if (is_sram_locked()) {
+ omap_sram_base = OMAP2_SRAM_PUB_VA;
+ sram_start = OMAP2_SRAM_PUB_PA;
+ omap_sram_size = 0x800; /* 2K */
+ } else {
+ omap_sram_base = OMAP2_SRAM_VA;
+ sram_start = OMAP2_SRAM_PA;
+ if (cpu_is_omap242x())
+ omap_sram_size = 0xa0000; /* 640K */
+ else if (cpu_is_omap243x())
+ omap_sram_size = 0x10000; /* 64K */
+ }
+ } else {
omap_sram_base = OMAP1_SRAM_VA;
- else
- omap_sram_base = OMAP2_SRAM_VA;
+ sram_start = OMAP1_SRAM_PA;
- if (cpu_is_omap730())
- omap_sram_size = 0x32000; /* 200K */
- else if (cpu_is_omap15xx())
- omap_sram_size = 0x30000; /* 192K */
- else if (cpu_is_omap1610() || cpu_is_omap1621() || cpu_is_omap1710())
- omap_sram_size = 0x4000; /* 16K */
- else if (cpu_is_omap1611())
- omap_sram_size = 0x3e800; /* 250K */
- else if (cpu_is_omap2420())
- omap_sram_size = 0xa0014; /* 640K */
- else {
- printk(KERN_ERR "Could not detect SRAM size\n");
- omap_sram_size = 0x4000;
+ if (cpu_is_omap730())
+ omap_sram_size = 0x32000; /* 200K */
+ else if (cpu_is_omap15xx())
+ omap_sram_size = 0x30000; /* 192K */
+ else if (cpu_is_omap1610() || cpu_is_omap1621() ||
+ cpu_is_omap1710())
+ omap_sram_size = 0x4000; /* 16K */
+ else if (cpu_is_omap1611())
+ omap_sram_size = 0x3e800; /* 250K */
+ else {
+ printk(KERN_ERR "Could not detect SRAM size\n");
+ omap_sram_size = 0x4000;
+ }
}
-
+ get_fb_sram_conf(sram_start + SRAM_BOOTLOADER_SZ,
+ omap_sram_size - SRAM_BOOTLOADER_SZ,
+ &omap_fb_sram_start, &omap_fb_sram_size);
+ if (omap_fb_sram_size)
+ omap_sram_size -= sram_start + omap_sram_size -
+ omap_fb_sram_start;
omap_sram_ceil = omap_sram_base + omap_sram_size;
}
@@ -80,12 +169,20 @@
*/
void __init omap_map_sram(void)
{
+ unsigned long base;
+
if (omap_sram_size == 0)
return;
if (cpu_is_omap24xx()) {
omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA;
- omap_sram_io_desc[0].pfn = __phys_to_pfn(OMAP2_SRAM_PA);
+
+ if (is_sram_locked())
+ base = OMAP2_SRAM_PUB_PA;
+ else
+ base = OMAP2_SRAM_PA;
+ base = ROUND_DOWN(base, PAGE_SIZE);
+ omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
}
omap_sram_io_desc[0].length = (omap_sram_size + PAGE_SIZE-1)/PAGE_SIZE;
@@ -93,7 +190,8 @@
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",
- omap_sram_io_desc[0].pfn, omap_sram_io_desc[0].virtual,
+ __pfn_to_phys(omap_sram_io_desc[0].pfn),
+ omap_sram_io_desc[0].virtual,
omap_sram_io_desc[0].length);
/*
@@ -118,8 +216,9 @@
printk(KERN_ERR "Not enough space in SRAM\n");
return NULL;
}
+
omap_sram_ceil -= size;
- omap_sram_ceil &= ~0x3;
+ omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *));
memcpy((void *)omap_sram_ceil, start, size);
return (void *)omap_sram_ceil;
diff --git a/include/asm-arm/arch-omap/pm.h b/include/asm-arm/arch-omap/pm.h
index 7c79042..05b003f 100644
--- a/include/asm-arm/arch-omap/pm.h
+++ b/include/asm-arm/arch-omap/pm.h
@@ -49,7 +49,7 @@
/*
* ----------------------------------------------------------------------------
- * Powermanagement bitmasks
+ * Power management bitmasks
* ----------------------------------------------------------------------------
*/
#define IDLE_WAIT_CYCLES 0x00000fff
@@ -112,32 +112,59 @@
#endif
#ifndef __ASSEMBLER__
+
+#include <linux/clk.h>
+
+extern void prevent_idle_sleep(void);
+extern void allow_idle_sleep(void);
+
+/**
+ * clk_deny_idle - Prevents the clock from being idled during MPU idle
+ * @clk: clock signal handle
+ */
+void clk_deny_idle(struct clk *clk);
+
+/**
+ * clk_allow_idle - Counters previous clk_deny_idle
+ * @clk: clock signal handle
+ */
+void clk_deny_idle(struct clk *clk);
+
extern void omap_pm_idle(void);
extern void omap_pm_suspend(void);
extern void omap730_cpu_suspend(unsigned short, unsigned short);
extern void omap1510_cpu_suspend(unsigned short, unsigned short);
extern void omap1610_cpu_suspend(unsigned short, unsigned short);
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision);
extern void omap730_idle_loop_suspend(void);
extern void omap1510_idle_loop_suspend(void);
extern void omap1610_idle_loop_suspend(void);
+extern void omap24xx_idle_loop_suspend(void);
+
+extern unsigned int omap730_cpu_suspend_sz;
+extern unsigned int omap1510_cpu_suspend_sz;
+extern unsigned int omap1610_cpu_suspend_sz;
+extern unsigned int omap24xx_cpu_suspend_sz;
+extern unsigned int omap730_idle_loop_suspend_sz;
+extern unsigned int omap1510_idle_loop_suspend_sz;
+extern unsigned int omap1610_idle_loop_suspend_sz;
+extern unsigned int omap24xx_idle_loop_suspend_sz;
#ifdef CONFIG_OMAP_SERIAL_WAKE
extern void omap_serial_wake_trigger(int enable);
#else
+#define omap_serial_wakeup_init() {}
#define omap_serial_wake_trigger(x) {}
#endif /* CONFIG_OMAP_SERIAL_WAKE */
-extern unsigned int omap730_cpu_suspend_sz;
-extern unsigned int omap730_idle_loop_suspend_sz;
-extern unsigned int omap1510_cpu_suspend_sz;
-extern unsigned int omap1510_idle_loop_suspend_sz;
-extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap1610_idle_loop_suspend_sz;
-
#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x)
#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x))
#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x]
+#define DSP_SAVE(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] = __raw_readw(x)
+#define DSP_RESTORE(x) __raw_writew((dsp_sleep_save[DSP_SLEEP_SAVE_##x]), (x))
+#define DSP_SHOW(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x]
+
#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x)
#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
@@ -154,6 +181,10 @@
#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
+#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
+#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
+#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
+
/*
* List of global OMAP registers to preserve.
* More ones like CP and general purpose register values are preserved
@@ -176,6 +207,15 @@
ARM_SLEEP_SAVE_SIZE
};
+enum dsp_save_state {
+ DSP_SLEEP_SAVE_START = 0,
+ /*
+ * DSP registers 16 bits
+ */
+ DSP_SLEEP_SAVE_DSP_IDLECT2,
+ DSP_SLEEP_SAVE_SIZE
+};
+
enum ulpd_save_state {
ULPD_SLEEP_SAVE_START = 0,
/*
@@ -254,5 +294,30 @@
#endif
};
+enum omap24xx_save_state {
+ OMAP24XX_SLEEP_SAVE_START = 0,
+ OMAP24XX_SLEEP_SAVE_INTC_MIR0,
+ OMAP24XX_SLEEP_SAVE_INTC_MIR1,
+ OMAP24XX_SLEEP_SAVE_INTC_MIR2,
+ OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
+ OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
+ OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
+ OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
+ OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
+ OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
+ OMAP24XX_SLEEP_SAVE_GPIO3_OE,
+ OMAP24XX_SLEEP_SAVE_GPIO4_OE,
+ OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
+ OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
+ OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
+ OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
+ OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
+ OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
+ OMAP24XX_SLEEP_SAVE_SIZE
+};
+
#endif /* ASSEMBLER */
#endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/include/asm-arm/arch-omap/sram.h b/include/asm-arm/arch-omap/sram.h
index e72ccbf..6fc0dd5 100644
--- a/include/asm-arm/arch-omap/sram.h
+++ b/include/asm-arm/arch-omap/sram.h
@@ -20,6 +20,8 @@
u32 mem_type);
extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+extern unsigned long omap_fb_sram_start;
+extern unsigned long omap_fb_sram_size;
/* Do not use these */
extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl);