Merge branch 'sg' of git://git.kernel.dk/linux-2.6-block
* 'sg' of git://git.kernel.dk/linux-2.6-block:
SG: work with the SCSI fixed maximum allocations.
SG: Convert SCSI to use scatterlist helpers for sg chaining
SG: Move functions to lib/scatterlist.c and add sg chaining allocator helpers
diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt
index 555c8cf..af3b925 100644
--- a/Documentation/cpu-freq/user-guide.txt
+++ b/Documentation/cpu-freq/user-guide.txt
@@ -45,6 +45,7 @@
ARM Integrator
ARM-SA1100
ARM-SA1110
+Intel PXA
1.2 x86
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index cb12ae1..53a6389 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -141,6 +141,7 @@
- ppc64
- ia64 (Does not support probes on instruction slot1.)
- sparc64 (Return probes not yet implemented.)
+- arm
3. Configuring Kprobes
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a04f507..de211ac 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -180,8 +180,8 @@
bool "Atmel AT91"
select GENERIC_GPIO
help
- This enables support for systems based on the Atmel AT91RM9200
- and AT91SAM9xxx processors.
+ This enables support for systems based on the Atmel AT91RM9200,
+ AT91SAM9 and AT91CAP9 processors.
config ARCH_CLPS7500
bool "Cirrus CL-PS7500FE"
@@ -217,6 +217,7 @@
bool "EP93xx-based"
select ARM_AMBA
select ARM_VIC
+ select GENERIC_GPIO
help
This enables support for the Cirrus EP93xx series of CPUs.
@@ -333,6 +334,16 @@
help
Support for Freescale MXC/iMX-based family of processors
+config ARCH_ORION
+ bool "Marvell Orion"
+ depends on MMU
+ select PCI
+ select GENERIC_GPIO
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ help
+ Support for Marvell Orion System on Chip family.
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
help
@@ -345,6 +356,7 @@
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select TICK_ONESHOT
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
@@ -366,6 +378,7 @@
select ARCH_DISCONTIGMEM_ENABLE
select ARCH_MTD_XIP
select GENERIC_GPIO
+ select GENERIC_TIME
help
Support for StrongARM 11x0 based boards.
@@ -409,6 +422,17 @@
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
+config ARCH_MSM7X00A
+ bool "Qualcomm MSM7X00A"
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ help
+ Support for Qualcomm MSM7X00A based systems. This runs on the ARM11
+ apps processor of the MSM7X00A and depends on a shared memory
+ interface to the ARM9 modem processor which runs the baseband stack
+ and controls some vital subsystems (clock and power control, etc).
+ <http://www.cdmatech.com/products/msm7200_chipset_solution.jsp>
+
endchoice
source "arch/arm/mach-clps711x/Kconfig"
@@ -441,6 +465,8 @@
source "arch/arm/mach-omap2/Kconfig"
+source "arch/arm/mach-orion/Kconfig"
+
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s3c/Kconfig"
@@ -477,6 +503,8 @@
source "arch/arm/mach-ks8695/Kconfig"
+source "arch/arm/mach-msm/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
@@ -657,6 +685,7 @@
default 128 if ARCH_L7200
default 200 if ARCH_EBSA110 || ARCH_S3C2410
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
+ default AT91_TIMER_HZ if ARCH_AT91
default 100
config AEABI
@@ -716,7 +745,7 @@
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \
- ARCH_KS8695
+ ARCH_KS8695 || MACH_RD88F5182
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
@@ -867,7 +896,7 @@
endmenu
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX )
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
menu "CPU Frequency scaling"
@@ -903,6 +932,12 @@
If in doubt, say N.
+config CPU_FREQ_PXA
+ bool
+ depends on CPU_FREQ && ARCH_PXA && PXA25x
+ default y
+ select CPU_FREQ_DEFAULT_GOV_USERSPACE
+
endmenu
endif
@@ -951,7 +986,7 @@
config VFP
bool "VFP-format floating point maths"
- depends on CPU_V6 || CPU_ARM926T
+ depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
help
Say Y to include VFP support code in the kernel. This is needed
if your hardware includes a VFP unit.
@@ -961,6 +996,18 @@
Say N if your target does not have VFP hardware.
+config VFPv3
+ bool
+ depends on VFP
+ default y if CPU_V7
+
+config NEON
+ bool "Advanced SIMD (NEON) Extension support"
+ depends on VFPv3 && CPU_V7
+ help
+ Say Y to include support code for NEON, the ARMv7 Advanced SIMD
+ Extension.
+
endmenu
menu "Userspace binary formats"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 18101f5..192ee01 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -43,6 +43,12 @@
you are concerned with the code size or don't want to see these
messages.
+config DEBUG_STACK_USAGE
+ bool "Enable stack utilization instrumentation"
+ depends on DEBUG_KERNEL
+ help
+ Enables the display of the minimum amount of free stack which each
+ task has ever had available in the sysrq-T output.
# These options are only for real kernel hackers who want to get their hands dirty.
config DEBUG_LL
diff --git a/arch/arm/Kconfig.instrumentation b/arch/arm/Kconfig.instrumentation
index 63b8c6d..453ad8e 100644
--- a/arch/arm/Kconfig.instrumentation
+++ b/arch/arm/Kconfig.instrumentation
@@ -43,6 +43,16 @@
config OPROFILE_ARM11_CORE
bool
+config KPROBES
+ bool "Kprobes"
+ depends on KALLSYMS && MODULES && !UML && !XIP_KERNEL
+ help
+ Kprobes allows you to trap at almost any kernel address and
+ execute a callback function. register_kprobe() establishes
+ a probepoint and specifies the callback. Kprobes is useful
+ for kernel debugging, non-intrusive instrumentation and testing.
+ If in doubt, say "N".
+
config MARKERS
bool "Activate markers"
help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 35e56c9..7b8ff66 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -139,6 +139,8 @@
machine-$(CONFIG_ARCH_KS8695) := ks8695
incdir-$(CONFIG_ARCH_MXC) := mxc
machine-$(CONFIG_ARCH_MX3) := mx3
+ machine-$(CONFIG_ARCH_ORION) := orion
+ machine-$(CONFIG_ARCH_MSM7X00A) := msm
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 5fde99f..de9d9ee 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -44,10 +44,6 @@
OBJS += head-sharpsl.o
endif
-ifeq ($(CONFIG_ARCH_AT91RM9200),y)
-OBJS += head-at91rm9200.o
-endif
-
ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
ifeq ($(CONFIG_CPU_CP15),y)
OBJS += big-endian.o
diff --git a/arch/arm/boot/compressed/head-at91rm9200.S b/arch/arm/boot/compressed/head-at91rm9200.S
deleted file mode 100644
index 11782cc..0000000
--- a/arch/arm/boot/compressed/head-at91rm9200.S
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * linux/arch/arm/boot/compressed/head-at91rm9200.S
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach-types.h>
-
- .section ".start", "ax"
-
- @ Atmel AT91RM9200-DK : 262
- mov r3, #(MACH_TYPE_AT91RM9200DK & 0xff)
- orr r3, r3, #(MACH_TYPE_AT91RM9200DK & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Cogent CSB337 : 399
- mov r3, #(MACH_TYPE_CSB337 & 0xff)
- orr r3, r3, #(MACH_TYPE_CSB337 & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Cogent CSB637 : 648
- mov r3, #(MACH_TYPE_CSB637 & 0xff)
- orr r3, r3, #(MACH_TYPE_CSB637 & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Atmel AT91RM9200-EK : 705
- mov r3, #(MACH_TYPE_AT91RM9200EK & 0xff)
- orr r3, r3, #(MACH_TYPE_AT91RM9200EK & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Conitec Carmeva : 769
- mov r3, #(MACH_TYPE_CARMEVA & 0xff)
- orr r3, r3, #(MACH_TYPE_CARMEVA & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ KwikByte KB920x : 612
- mov r3, #(MACH_TYPE_KB9200 & 0xff)
- orr r3, r3, #(MACH_TYPE_KB9200 & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Embest ATEB9200 : 923
- mov r3, #(MACH_TYPE_ATEB9200 & 0xff)
- orr r3, r3, #(MACH_TYPE_ATEB9200 & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Sperry-Sun KAFA : 662
- mov r3, #(MACH_TYPE_KAFA & 0xff)
- orr r3, r3, #(MACH_TYPE_KAFA & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ picotux 200 : 963
- mov r3, #(MACH_TYPE_PICOTUX2XX & 0xff)
- orr r3, r3, #(MACH_TYPE_PICOTUX2XX & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Ajeco 1ARM : 1075
- mov r3, #(MACH_TYPE_ONEARM & 0xff)
- orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Unknown board, use the AT91RM9200DK board
- @ mov r7, #MACH_TYPE_AT91RM9200
- mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff)
- orr r7, r7, #(MACH_TYPE_AT91RM9200DK & 0xff00)
-
-99:
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 5cac46a..3c2c8f2 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -623,6 +623,12 @@
b __armv4_mmu_cache_off
b __armv4_mmu_cache_flush
+ .word 0x56055310 @ Feroceon
+ .word 0xfffffff0
+ b __armv4_mmu_cache_on
+ b __armv4_mmu_cache_off
+ b __armv5tej_mmu_cache_flush
+
@ These match on the architecture ID
.word 0x00020000 @ ARMv4T
@@ -641,7 +647,7 @@
.word 0x000f0000
b __armv4_mmu_cache_on
b __armv4_mmu_cache_off
- b __armv4_mmu_cache_flush
+ b __armv5tej_mmu_cache_flush
.word 0x0007b000 @ ARMv6
.word 0x000ff000
@@ -821,6 +827,13 @@
mcr p15, 0, r10, c7, c10, 4 @ drain WB
mov pc, lr
+__armv5tej_mmu_cache_flush:
+1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate D cache
+ bne 1b
+ mcr p15, 0, r0, c7, c5, 0 @ flush I cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
__armv4_mmu_cache_flush:
mov r2, #64*1024 @ default: 32K dcache size (*2)
mov r11, #32 @ default: 32 byte line size
diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c
index bf1075e..f53bca4 100644
--- a/arch/arm/common/rtctime.c
+++ b/arch/arm/common/rtctime.c
@@ -20,7 +20,6 @@
#include <linux/capability.h>
#include <linux/device.h>
#include <linux/mutex.h>
-#include <linux/rtc.h>
#include <asm/rtc.h>
#include <asm/semaphore.h>
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
new file mode 100644
index 0000000..e32e736
--- /dev/null
+++ b/arch/arm/configs/at91cap9adk_defconfig
@@ -0,0 +1,1143 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc8
+# Wed Jan 23 22:55:57 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91CAP9=y
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91CAP9 Board Type
+#
+CONFIG_MACH_AT91CAP9ADK=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+CONFIG_LOGO_LINUX_VGA16=y
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/colibri_defconfig b/arch/arm/configs/colibri_defconfig
new file mode 100644
index 0000000..c3e3418
--- /dev/null
+++ b/arch/arm/configs/colibri_defconfig
@@ -0,0 +1,1481 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc3
+# Mon Dec 3 13:36:09 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+CONFIG_MACH_COLIBRI=y
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_PXA27x=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_QUEUE=m
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_PXA_FICP is not set
+# CONFIG_MCS_FIR is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=y
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_DISKONCHIP=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=8
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_HOSTAP=y
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_ZD1211RW is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_SERIAL=m
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_UCB1400=y
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_PXA is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SA1100_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_DUMMY_HCD=y
+CONFIG_USB_DUMMY_HCD=m
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_PXA is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_LEDS_CLASS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+CONFIG_RTC_DRV_PCF8583=m
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SA1100 is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=1
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-15"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_REED_SOLOMON=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 970c8c7..4264e27 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -367,7 +367,6 @@
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_OBSOLETE_CHIPS=y
CONFIG_MTD_SHARP=y
# CONFIG_MTD_XIP is not set
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
new file mode 100644
index 0000000..ed487b9
--- /dev/null
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -0,0 +1,1499 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21-hh17
+# Fri Nov 9 20:23:03 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_BOARD_IRQ_MAP_SMALL is not set
+CONFIG_BOARD_IRQ_MAP_BIG=y
+CONFIG_DMABOUNCE=y
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+CONFIG_TOSHIBA_TMIO_OHCI=y
+CONFIG_ARCH_ESERIES=y
+CONFIG_MACH_E330=y
+CONFIG_MACH_E740=y
+CONFIG_MACH_E750=y
+CONFIG_MACH_E400=y
+CONFIG_MACH_E800=y
+CONFIG_E330_LCD=y
+CONFIG_E740_LCD=y
+CONFIG_E750_LCD=y
+CONFIG_E400_LCD=y
+CONFIG_E800_LCD=y
+CONFIG_ESERIES_UDC=y
+CONFIG_E330_TC6387XB=y
+CONFIG_E740_T7L66XB=y
+CONFIG_E400_T7L66XB=y
+CONFIG_E750_E800_TC6393XB=y
+CONFIG_E740_PCMCIA=m
+CONFIG_E750_PCMCIA=m
+CONFIG_E800_PCMCIA=m
+# CONFIG_MACH_A620 is not set
+# CONFIG_MACH_A716 is not set
+# CONFIG_MACH_A730 is not set
+# CONFIG_ARCH_H1900 is not set
+# CONFIG_ARCH_H2200 is not set
+# CONFIG_MACH_H3900 is not set
+# CONFIG_MACH_H4000 is not set
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_HX2750 is not set
+# CONFIG_ARCH_H5400 is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_HTCUNIVERSAL is not set
+# CONFIG_MACH_HTCALPINE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HTCAPACHE is not set
+# CONFIG_MACH_BLUEANGEL is not set
+
+#
+# HTC_HW6X00
+#
+# CONFIG_MACH_HTCBEETLES is not set
+# CONFIG_MACH_HW6900 is not set
+# CONFIG_MACH_HTCATHENA is not set
+# CONFIG_ARCH_AXIMX3 is not set
+# CONFIG_ARCH_AXIMX5 is not set
+# CONFIG_MACH_X50 is not set
+# CONFIG_ARCH_ROVERP1 is not set
+# CONFIG_ARCH_ROVERP5P is not set
+# CONFIG_MACH_XSCALE_PALMLD is not set
+# CONFIG_MACH_T3XSCALE is not set
+# CONFIG_MACH_RECON is not set
+# CONFIG_MACH_GHI270HG is not set
+# CONFIG_MACH_GHI270 is not set
+# CONFIG_MACH_LOOXC550 is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+CONFIG_PXA25x=y
+
+#
+# Linux As Bootloader
+#
+# CONFIG_LAB is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=m
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+# CONFIG_TXTOFFSET_DELTA is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_DPM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=m
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=6144
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=m
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=m
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=m
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_HOSTAP=m
+# CONFIG_HOSTAP_FIRMWARE is not set
+# CONFIG_HOSTAP_CS is not set
+# CONFIG_ACX is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=m
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_LED_TRIGGER is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_PXA is not set
+# CONFIG_RS232_SERIAL is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_SA1100_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_TIHTC is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+# CONFIG_POWER_SUPPLY is not set
+
+#
+# L3 serial bus support
+#
+# CONFIG_L3 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_ADC is not set
+
+#
+# Compaq/iPAQ Drivers
+#
+
+#
+# Compaq/HP iPAQ Drivers
+#
+# CONFIG_IPAQ_SLEEVE is not set
+# CONFIG_SLEEVE_DEBUG is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_ASIC2 is not set
+# CONFIG_HTC_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_BBKEYS is not set
+# CONFIG_HTC_ASIC3_DS1WM is not set
+# CONFIG_SOC_SAMCOP is not set
+# CONFIG_SOC_HAMCOP is not set
+# CONFIG_SOC_MQ11XX is not set
+CONFIG_SOC_T7L66XB=y
+# CONFIG_SOC_TC6387XB is not set
+CONFIG_SOC_TC6393XB=y
+# CONFIG_SOC_TSC2101 is not set
+# CONFIG_SOC_TSC2200 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CORGI=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_IMAGEON is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+CONFIG_FB_W100=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VSFB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+CONFIG_FONT_ACORN_8x8=y
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+# CONFIG_SND_RECON is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# SoC audio support
+#
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC=m
+
+#
+# SoC Platforms
+#
+
+#
+# SoC Audio for the Atmel AT91
+#
+
+#
+# SoC Audio for the Intel PXA2xx
+#
+CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_AC97=m
+CONFIG_SND_PXA2XX_SOC_E740_WM9705=m
+CONFIG_SND_PXA2XX_SOC_E750_WM9705=m
+CONFIG_SND_PXA2XX_SOC_E800_WM9712=m
+# CONFIG_SND_PXA2XX_SOC_MAGICIAN is not set
+# CONFIG_SND_PXA2XX_SOC_BLUEANGEL is not set
+# CONFIG_SND_PXA2XX_SOC_H5000 is not set
+
+#
+# SoC Audio for the Freescale i.MX
+#
+
+#
+# SoC Audio for the Samsung S3C24XX
+#
+# CONFIG_SND_SOC_AC97_CODEC is not set
+# CONFIG_SND_SOC_WM8711 is not set
+# CONFIG_SND_SOC_WM8510 is not set
+# CONFIG_SND_SOC_WM8731 is not set
+# CONFIG_SND_SOC_WM8750 is not set
+# CONFIG_SND_SOC_WM8753 is not set
+# CONFIG_SND_SOC_WM8772 is not set
+# CONFIG_SND_SOC_WM8971 is not set
+# CONFIG_SND_SOC_WM8956 is not set
+# CONFIG_SND_SOC_WM8960 is not set
+# CONFIG_SND_SOC_WM8976 is not set
+# CONFIG_SND_SOC_WM8974 is not set
+# CONFIG_SND_SOC_WM8980 is not set
+CONFIG_SND_SOC_WM9705=m
+# CONFIG_SND_SOC_WM9713 is not set
+CONFIG_SND_SOC_WM9712=m
+# CONFIG_SND_SOC_UDA1380 is not set
+# CONFIG_SND_SOC_AK4535 is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA2XX=y
+CONFIG_USB_PXA2XX=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_MQ11XX is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_CHAR is not set
+# CONFIG_USB_PXA2XX_GPIO is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_PXA is not set
+CONFIG_MMC_TMIO=y
+# CONFIG_MMC_SAMCOP is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
index add03c9..988b4d1 100644
--- a/arch/arm/configs/iop13xx_defconfig
+++ b/arch/arm/configs/iop13xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Thu Jul 19 15:57:52 2007
+# Linux kernel version: 2.6.24-rc5
+# Wed Dec 12 16:11:03 2007
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -26,15 +26,11 @@
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
@@ -45,10 +41,15 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -69,7 +70,6 @@
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -130,6 +130,7 @@
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
@@ -151,9 +152,12 @@
CONFIG_MACH_IQ81340MC=y
#
-# IOP13XX IMU Support
+# Boot options
#
-# CONFIG_IOP_IMU is not set
+
+#
+# Power management
+#
CONFIG_PLAT_IOP=y
#
@@ -185,10 +189,7 @@
CONFIG_PCI_SYSCALL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
#
@@ -207,6 +208,7 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -246,6 +248,7 @@
# Power management options
#
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
#
# Networking
@@ -285,6 +288,7 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -324,10 +328,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -356,6 +356,7 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -383,6 +384,7 @@
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -423,6 +425,7 @@
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -463,6 +466,11 @@
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
#
# SCSI device support
@@ -499,12 +507,9 @@
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
-CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
@@ -515,6 +520,7 @@
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -555,14 +561,8 @@
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -577,6 +577,8 @@
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
@@ -585,6 +587,7 @@
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -592,6 +595,7 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -600,11 +604,14 @@
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
@@ -639,7 +646,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -688,12 +694,10 @@
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
@@ -758,9 +762,9 @@
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -768,12 +772,13 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -787,14 +792,17 @@
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -806,11 +814,13 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
@@ -818,19 +828,6 @@
# CONFIG_MFD_SM501 is not set
#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -840,14 +837,16 @@
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
#
# Console display driver support
@@ -862,6 +861,7 @@
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -877,16 +877,15 @@
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
+# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=y
#
-# DMA Engine support
+# DMA Devices
#
+CONFIG_INTEL_IOP_ADMA=y
CONFIG_DMA_ENGINE=y
#
@@ -895,12 +894,6 @@
# CONFIG_NET_DMA is not set
#
-# DMA Devices
-#
-# CONFIG_INTEL_IOATDMA is not set
-CONFIG_INTEL_IOP_ADMA=y
-
-#
# File systems
#
CONFIG_EXT2_FS=y
@@ -912,7 +905,6 @@
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
@@ -952,7 +944,6 @@
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -969,10 +960,12 @@
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
@@ -981,10 +974,7 @@
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -1037,10 +1027,6 @@
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
@@ -1081,21 +1067,16 @@
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1104,6 +1085,7 @@
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
#
@@ -1112,6 +1094,7 @@
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
@@ -1136,6 +1119,7 @@
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=y
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1150,11 +1134,13 @@
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
+# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
#
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index 027aef2..83f40d4 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Thu Jul 19 16:00:36 2007
+# Linux kernel version: 2.6.24-rc5
+# Wed Dec 12 15:49:08 2007
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -26,15 +26,11 @@
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
@@ -45,9 +41,14 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -69,7 +70,6 @@
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -130,6 +130,7 @@
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
@@ -153,6 +154,15 @@
CONFIG_ARCH_IQ31244=y
CONFIG_MACH_N2100=y
CONFIG_IOP3XX_ATU=y
+# CONFIG_MACH_EM7210 is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
CONFIG_PLAT_IOP=y
#
@@ -182,11 +192,8 @@
CONFIG_PCI=y
CONFIG_PCI_SYSCALL=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
@@ -205,6 +212,7 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -244,6 +252,7 @@
# Power management options
#
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
#
# Networking
@@ -282,6 +291,7 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -321,10 +331,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -353,6 +359,7 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -382,6 +389,7 @@
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -417,6 +425,7 @@
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -459,6 +468,11 @@
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
# CONFIG_IDE is not set
#
@@ -496,12 +510,9 @@
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
@@ -512,6 +523,7 @@
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -576,6 +588,7 @@
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
@@ -606,14 +619,8 @@
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -628,6 +635,8 @@
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
@@ -641,13 +650,16 @@
# CONFIG_DM9000 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
@@ -667,6 +679,7 @@
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -675,6 +688,7 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -683,11 +697,14 @@
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
@@ -703,7 +720,6 @@
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
@@ -732,7 +748,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -781,12 +796,10 @@
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
@@ -852,9 +865,9 @@
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -862,12 +875,13 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -881,14 +895,17 @@
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -900,11 +917,13 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
@@ -912,19 +931,6 @@
# CONFIG_MFD_SM501 is not set
#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -935,14 +941,16 @@
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
#
# Console display driver support
@@ -957,6 +965,7 @@
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
@@ -1013,6 +1022,7 @@
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
@@ -1070,16 +1080,60 @@
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
+# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_IOP_ADMA=y
CONFIG_DMA_ENGINE=y
#
@@ -1088,12 +1142,6 @@
CONFIG_NET_DMA=y
#
-# DMA Devices
-#
-# CONFIG_INTEL_IOATDMA is not set
-CONFIG_INTEL_IOP_ADMA=y
-
-#
# File systems
#
CONFIG_EXT2_FS=y
@@ -1105,7 +1153,6 @@
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
@@ -1145,7 +1192,6 @@
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -1162,10 +1208,12 @@
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
@@ -1174,10 +1222,7 @@
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -1224,26 +1269,17 @@
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1270,10 +1306,13 @@
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
@@ -1285,6 +1324,7 @@
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
@@ -1309,6 +1349,7 @@
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=y
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1323,11 +1364,13 @@
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
+# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
#
diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index 721ee64..917afb5 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Thu Jul 19 16:05:59 2007
+# Linux kernel version: 2.6.24-rc5
+# Wed Dec 12 16:11:27 2007
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -26,15 +26,11 @@
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
@@ -45,9 +41,14 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -69,7 +70,6 @@
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -130,6 +130,7 @@
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
@@ -150,6 +151,14 @@
#
CONFIG_ARCH_IQ80331=y
CONFIG_MACH_IQ80332=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
CONFIG_PLAT_IOP=y
#
@@ -179,11 +188,8 @@
CONFIG_PCI=y
CONFIG_PCI_SYSCALL=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
@@ -202,6 +208,7 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -241,6 +248,7 @@
# Power management options
#
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
#
# Networking
@@ -279,6 +287,7 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -318,10 +327,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -350,6 +355,7 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -379,6 +385,7 @@
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -419,6 +426,7 @@
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -459,6 +467,11 @@
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
# CONFIG_IDE is not set
#
@@ -496,12 +509,9 @@
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
@@ -512,6 +522,7 @@
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -552,14 +563,8 @@
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -574,6 +579,8 @@
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
@@ -582,6 +589,7 @@
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -589,6 +597,7 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -597,11 +606,14 @@
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
@@ -636,7 +648,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -685,12 +696,10 @@
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
@@ -755,9 +764,9 @@
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -765,12 +774,13 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -784,14 +794,17 @@
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -803,11 +816,13 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
@@ -815,19 +830,6 @@
# CONFIG_MFD_SM501 is not set
#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -837,14 +839,16 @@
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
#
# Console display driver support
@@ -859,6 +863,7 @@
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -874,16 +879,15 @@
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
+# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=y
#
-# DMA Engine support
+# DMA Devices
#
+CONFIG_INTEL_IOP_ADMA=y
CONFIG_DMA_ENGINE=y
#
@@ -892,12 +896,6 @@
CONFIG_NET_DMA=y
#
-# DMA Devices
-#
-# CONFIG_INTEL_IOATDMA is not set
-CONFIG_INTEL_IOP_ADMA=y
-
-#
# File systems
#
CONFIG_EXT2_FS=y
@@ -909,7 +907,6 @@
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
@@ -949,7 +946,6 @@
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -969,10 +965,7 @@
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -1019,26 +1012,17 @@
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1065,10 +1049,13 @@
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
@@ -1079,6 +1066,7 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
diff --git a/arch/arm/configs/littleton_defconfig b/arch/arm/configs/littleton_defconfig
new file mode 100644
index 0000000..1db4969
--- /dev/null
+++ b/arch/arm/configs/littleton_defconfig
@@ -0,0 +1,783 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc5
+# Fri Dec 21 11:06:19 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+CONFIG_CPU_PXA310=y
+# CONFIG_CPU_PXA320 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_ZYLONITE is not set
+CONFIG_MACH_LITTLETON=y
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_PXA3xx=y
+CONFIG_PXA_SSP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=64M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig
new file mode 100644
index 0000000..ae4c5e6
--- /dev/null
+++ b/arch/arm/configs/msm_defconfig
@@ -0,0 +1,895 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23
+# Wed Nov 7 01:36:45 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_GPIOS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_PANIC_TIMEOUT=0
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_GOLDFISH is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_ARCH_MSM7X00A=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# MSM7200 Board Type
+#
+CONFIG_MACH_HALIBUT=y
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
+# CONFIG_SERIAL_MSM_NOINIT is not set
+CONFIG_MSM_SMD=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_MSM_NAND=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_GOLDFISH_NAND is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+CONFIG_MSM_RMNET=y
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_MEP is not set
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI=y
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_INPUT_GPIO=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DCC_TTY=y
+# CONFIG_GOLDFISH_TTY is not set
+CONFIG_BINDER=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_MSM=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+CONFIG_SENSORS_PCA9633=y
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+CONFIG_SENSORS_AKM8976=y
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_LOW_MEMORY_KILLER=y
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_MSM=y
+# CONFIG_FB_GOLDFISH is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# USB Function Support
+#
+CONFIG_USB_FUNCTION=y
+CONFIG_USB_FUNCTION_MSM_HSUSB=y
+# CONFIG_USB_FUNCTION_NULL is not set
+# CONFIG_USB_FUNCTION_ZERO is not set
+# CONFIG_USB_FUNCTION_LOOPBACK is not set
+CONFIG_USB_FUNCTION_ADB=y
+# CONFIG_MMC is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Android
+#
+# CONFIG_ANDROID_GADGET is not set
+# CONFIG_ANDROID_RAM_CONSOLE is not set
+CONFIG_ANDROID_LOGGER=y
+CONFIG_ANDROID_VIBRATOR=y
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_YAFFS_FS=y
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/orion_defconfig b/arch/arm/configs/orion_defconfig
new file mode 100644
index 0000000..17a55de
--- /dev/null
+++ b/arch/arm/configs/orion_defconfig
@@ -0,0 +1,1384 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc3
+# Wed Nov 28 15:13:57 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+CONFIG_ARCH_ORION=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Orion Implementations
+#
+CONFIG_MACH_DB88F5281=y
+CONFIG_MACH_RD88F5182=y
+CONFIG_MACH_KUROBOX_PRO=y
+CONFIG_MACH_DNS323=y
+CONFIG_MACH_TS209=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_FEROCEON=y
+CONFIG_CPU_FEROCEON_OLD_ID=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_FTL=y
+CONFIG_NFTL=y
+# CONFIG_NFTL_RW is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_ORION=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+CONFIG_SCSI_MVSATA=y
+
+#
+# Sata options
+#
+# CONFIG_MV_SATA_SUPPORT_ATAPI is not set
+# CONFIG_MV_SATA_ENABLE_1MB_IOS is not set
+CONFIG_SATA_NO_DEBUG=y
+# CONFIG_SATA_DEBUG_ON_ERROR is not set
+# CONFIG_SATA_FULL_DEBUG is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+CONFIG_SKGE=y
+CONFIG_SKY2=y
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+CONFIG_I2C_MV64XXX=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SPLIT_ISO=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_SL811_HCD=y
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=y
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+CONFIG_RTC_DRV_M41T80=y
+# CONFIG_RTC_DRV_M41T80_WDT is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig
new file mode 100644
index 0000000..17b9b24
--- /dev/null
+++ b/arch/arm/configs/pcm027_defconfig
@@ -0,0 +1,1096 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc6
+# Fri Dec 21 10:52:09 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_MACH_PCM027=y
+CONFIG_MACH_PCM990_BASEBOARD=y
+CONFIG_PXA27x=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_PXA2XX_PCM=y
+CONFIG_SND_PXA2XX_AC97=y
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=m
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=m
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_NFS_DIRECTIO=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-15"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 593b565..faa7619 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -19,6 +19,7 @@
obj-$(CONFIG_PCI) += bios32.o isa.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c
index 0a3e9ad..2f080a3 100644
--- a/arch/arm/kernel/dma-isa.c
+++ b/arch/arm/kernel/dma-isa.c
@@ -216,7 +216,7 @@
request_dma(DMA_ISA_CASCADE, "cascade");
- for (i = 0; i < sizeof(dma_resources) / sizeof(dma_resources[0]); i++)
+ for (i = 0; i < ARRAY_SIZE(dma_resources); i++)
request_resource(&ioport_resource, dma_resources + i);
}
}
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 29dec08..a46d5b4 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -11,8 +11,8 @@
*
* Low-level vector interface routines
*
- * Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction that causes
- * it to save wrong values... Be aware!
+ * Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction
+ * that causes it to save wrong values... Be aware!
*/
#include <asm/memory.h>
@@ -58,6 +58,12 @@
.endm
+#ifdef CONFIG_KPROBES
+ .section .kprobes.text,"ax",%progbits
+#else
+ .text
+#endif
+
/*
* Invalid mode handlers
*/
@@ -112,8 +118,8 @@
#define SPFIX(code...)
#endif
- .macro svc_entry
- sub sp, sp, #S_FRAME_SIZE
+ .macro svc_entry, stack_hole=0
+ sub sp, sp, #(S_FRAME_SIZE + \stack_hole)
SPFIX( tst sp, #4 )
SPFIX( bicne sp, sp, #4 )
stmib sp, {r1 - r12}
@@ -121,7 +127,7 @@
ldmia r0, {r1 - r3}
add r5, sp, #S_SP @ here for interlock avoidance
mov r4, #-1 @ "" "" "" ""
- add r0, sp, #S_FRAME_SIZE @ "" "" "" ""
+ add r0, sp, #(S_FRAME_SIZE + \stack_hole)
SPFIX( addne r0, r0, #4 )
str r1, [sp] @ save the "real" r0 copied
@ from the exception stack
@@ -242,7 +248,14 @@
.align 5
__und_svc:
+#ifdef CONFIG_KPROBES
+ @ If a kprobe is about to simulate a "stmdb sp..." instruction,
+ @ it obviously needs free stack space which then will belong to
+ @ the saved context.
+ svc_entry 64
+#else
svc_entry
+#endif
@
@ call emulation code, which returns using r9 if it has emulated
@@ -480,6 +493,13 @@
* co-processor instructions. However, we have to watch out
* for the ARM6/ARM7 SWI bug.
*
+ * NEON is a special case that has to be handled here. Not all
+ * NEON instructions are co-processor instructions, so we have
+ * to make a special case of checking for them. Plus, there's
+ * five groups of them, so we have a table of mask/opcode pairs
+ * to check against, and if any match then we branch off into the
+ * NEON handler code.
+ *
* Emulators may wish to make use of the following registers:
* r0 = instruction opcode.
* r2 = PC+4
@@ -488,6 +508,23 @@
* lr = unrecognised instruction return address
*/
call_fpe:
+#ifdef CONFIG_NEON
+ adr r6, .LCneon_opcodes
+2:
+ ldr r7, [r6], #4 @ mask value
+ cmp r7, #0 @ end mask?
+ beq 1f
+ and r8, r0, r7
+ ldr r7, [r6], #4 @ opcode bits matching in mask
+ cmp r8, r7 @ NEON instruction?
+ bne 2b
+ get_thread_info r10
+ mov r7, #1
+ strb r7, [r10, #TI_USED_CP + 10] @ mark CP#10 as used
+ strb r7, [r10, #TI_USED_CP + 11] @ mark CP#11 as used
+ b do_vfp @ let VFP handler handle this
+1:
+#endif
tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27
#if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710)
and r8, r0, #0x0f000000 @ mask out op-code bits
@@ -537,6 +574,20 @@
mov pc, lr @ CP#14 (Debug)
mov pc, lr @ CP#15 (Control)
+#ifdef CONFIG_NEON
+ .align 6
+
+.LCneon_opcodes:
+ .word 0xfe000000 @ mask
+ .word 0xf2000000 @ opcode
+
+ .word 0xff100000 @ mask
+ .word 0xf4000000 @ opcode
+
+ .word 0x00000000 @ mask
+ .word 0x00000000 @ opcode
+#endif
+
do_fpe:
enable_irq
ldr r4, .LCfp
@@ -555,7 +606,7 @@
.data
ENTRY(fp_enter)
.word no_fp
- .text
+ .previous
no_fp: mov pc, lr
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 33e6cc2..6c90c50 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -72,7 +72,7 @@
ldr r1, [sp, #S_PSR] @ get calling cpsr
ldr lr, [sp, #S_PC]! @ get pc
msr spsr_cxsf, r1 @ save in spsr_svc
- ldmdb sp, {r0 - lr}^ @ get calling r1 - lr
+ ldmdb sp, {r0 - lr}^ @ get calling r0 - lr
mov r0, r0
add sp, sp, #S_FRAME_SIZE - S_PC
movs pc, lr @ return & move spsr_svc into cpsr
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
new file mode 100644
index 0000000..d51bc8b
--- /dev/null
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -0,0 +1,1529 @@
+/*
+ * arch/arm/kernel/kprobes-decode.c
+ *
+ * Copyright (C) 2006, 2007 Motorola Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/*
+ * We do not have hardware single-stepping on ARM, This
+ * effort is further complicated by the ARM not having a
+ * "next PC" register. Instructions that change the PC
+ * can't be safely single-stepped in a MP environment, so
+ * we have a lot of work to do:
+ *
+ * In the prepare phase:
+ * *) If it is an instruction that does anything
+ * with the CPU mode, we reject it for a kprobe.
+ * (This is out of laziness rather than need. The
+ * instructions could be simulated.)
+ *
+ * *) Otherwise, decode the instruction rewriting its
+ * registers to take fixed, ordered registers and
+ * setting a handler for it to run the instruction.
+ *
+ * In the execution phase by an instruction's handler:
+ *
+ * *) If the PC is written to by the instruction, the
+ * instruction must be fully simulated in software.
+ * If it is a conditional instruction, the handler
+ * will use insn[0] to copy its condition code to
+ * set r0 to 1 and insn[1] to "mov pc, lr" to return.
+ *
+ * *) Otherwise, a modified form of the instruction is
+ * directly executed. Its handler calls the
+ * instruction in insn[0]. In insn[1] is a
+ * "mov pc, lr" to return.
+ *
+ * Before calling, load up the reordered registers
+ * from the original instruction's registers. If one
+ * of the original input registers is the PC, compute
+ * and adjust the appropriate input register.
+ *
+ * After call completes, copy the output registers to
+ * the original instruction's original registers.
+ *
+ * We don't use a real breakpoint instruction since that
+ * would have us in the kernel go from SVC mode to SVC
+ * mode losing the link register. Instead we use an
+ * undefined instruction. To simplify processing, the
+ * undefined instruction used for kprobes must be reserved
+ * exclusively for kprobes use.
+ *
+ * TODO: ifdef out some instruction decoding based on architecture.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+
+#define sign_extend(x, signbit) ((x) | (0 - ((x) & (1 << (signbit)))))
+
+#define branch_displacement(insn) sign_extend(((insn) & 0xffffff) << 2, 25)
+
+#define PSR_fs (PSR_f|PSR_s)
+
+#define KPROBE_RETURN_INSTRUCTION 0xe1a0f00e /* mov pc, lr */
+#define SET_R0_TRUE_INSTRUCTION 0xe3a00001 /* mov r0, #1 */
+
+#define truecc_insn(insn) (((insn) & 0xf0000000) | \
+ (SET_R0_TRUE_INSTRUCTION & 0x0fffffff))
+
+typedef long (insn_0arg_fn_t)(void);
+typedef long (insn_1arg_fn_t)(long);
+typedef long (insn_2arg_fn_t)(long, long);
+typedef long (insn_3arg_fn_t)(long, long, long);
+typedef long (insn_4arg_fn_t)(long, long, long, long);
+typedef long long (insn_llret_0arg_fn_t)(void);
+typedef long long (insn_llret_3arg_fn_t)(long, long, long);
+typedef long long (insn_llret_4arg_fn_t)(long, long, long, long);
+
+union reg_pair {
+ long long dr;
+#ifdef __LITTLE_ENDIAN
+ struct { long r0, r1; };
+#else
+ struct { long r1, r0; };
+#endif
+};
+
+/*
+ * For STR and STM instructions, an ARM core may choose to use either
+ * a +8 or a +12 displacement from the current instruction's address.
+ * Whichever value is chosen for a given core, it must be the same for
+ * both instructions and may not change. This function measures it.
+ */
+
+static int str_pc_offset;
+
+static void __init find_str_pc_offset(void)
+{
+ int addr, scratch, ret;
+
+ __asm__ (
+ "sub %[ret], pc, #4 \n\t"
+ "str pc, %[addr] \n\t"
+ "ldr %[scr], %[addr] \n\t"
+ "sub %[ret], %[scr], %[ret] \n\t"
+ : [ret] "=r" (ret), [scr] "=r" (scratch), [addr] "+m" (addr));
+
+ str_pc_offset = ret;
+}
+
+/*
+ * The insnslot_?arg_r[w]flags() functions below are to keep the
+ * msr -> *fn -> mrs instruction sequences indivisible so that
+ * the state of the CPSR flags aren't inadvertently modified
+ * just before or just after the call.
+ */
+
+static inline long __kprobes
+insnslot_0arg_rflags(long cpsr, insn_0arg_fn_t *fn)
+{
+ register long ret asm("r0");
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret)
+ : [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ return ret;
+}
+
+static inline long long __kprobes
+insnslot_llret_0arg_rflags(long cpsr, insn_llret_0arg_fn_t *fn)
+{
+ register long ret0 asm("r0");
+ register long ret1 asm("r1");
+ union reg_pair fnr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret0), "=r" (ret1)
+ : [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ fnr.r0 = ret0;
+ fnr.r1 = ret1;
+ return fnr.dr;
+}
+
+static inline long __kprobes
+insnslot_1arg_rflags(long r0, long cpsr, insn_1arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long ret asm("r0");
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret)
+ : "0" (rr0), [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ return ret;
+}
+
+static inline long __kprobes
+insnslot_2arg_rflags(long r0, long r1, long cpsr, insn_2arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long ret asm("r0");
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret)
+ : "0" (rr0), "r" (rr1),
+ [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ return ret;
+}
+
+static inline long __kprobes
+insnslot_3arg_rflags(long r0, long r1, long r2, long cpsr, insn_3arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long rr2 asm("r2") = r2;
+ register long ret asm("r0");
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret)
+ : "0" (rr0), "r" (rr1), "r" (rr2),
+ [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ return ret;
+}
+
+static inline long long __kprobes
+insnslot_llret_3arg_rflags(long r0, long r1, long r2, long cpsr,
+ insn_llret_3arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long rr2 asm("r2") = r2;
+ register long ret0 asm("r0");
+ register long ret1 asm("r1");
+ union reg_pair fnr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret0), "=r" (ret1)
+ : "0" (rr0), "r" (rr1), "r" (rr2),
+ [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ fnr.r0 = ret0;
+ fnr.r1 = ret1;
+ return fnr.dr;
+}
+
+static inline long __kprobes
+insnslot_4arg_rflags(long r0, long r1, long r2, long r3, long cpsr,
+ insn_4arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long rr2 asm("r2") = r2;
+ register long rr3 asm("r3") = r3;
+ register long ret asm("r0");
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret)
+ : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3),
+ [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ return ret;
+}
+
+static inline long __kprobes
+insnslot_1arg_rwflags(long r0, long *cpsr, insn_1arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long ret asm("r0");
+ long oldcpsr = *cpsr;
+ long newcpsr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[oldcpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ "mrs %[newcpsr], cpsr \n\t"
+ : "=r" (ret), [newcpsr] "=r" (newcpsr)
+ : "0" (rr0), [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
+ return ret;
+}
+
+static inline long __kprobes
+insnslot_2arg_rwflags(long r0, long r1, long *cpsr, insn_2arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long ret asm("r0");
+ long oldcpsr = *cpsr;
+ long newcpsr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[oldcpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ "mrs %[newcpsr], cpsr \n\t"
+ : "=r" (ret), [newcpsr] "=r" (newcpsr)
+ : "0" (rr0), "r" (rr1), [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
+ return ret;
+}
+
+static inline long __kprobes
+insnslot_3arg_rwflags(long r0, long r1, long r2, long *cpsr,
+ insn_3arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long rr2 asm("r2") = r2;
+ register long ret asm("r0");
+ long oldcpsr = *cpsr;
+ long newcpsr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[oldcpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ "mrs %[newcpsr], cpsr \n\t"
+ : "=r" (ret), [newcpsr] "=r" (newcpsr)
+ : "0" (rr0), "r" (rr1), "r" (rr2),
+ [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
+ return ret;
+}
+
+static inline long __kprobes
+insnslot_4arg_rwflags(long r0, long r1, long r2, long r3, long *cpsr,
+ insn_4arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long rr2 asm("r2") = r2;
+ register long rr3 asm("r3") = r3;
+ register long ret asm("r0");
+ long oldcpsr = *cpsr;
+ long newcpsr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[oldcpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ "mrs %[newcpsr], cpsr \n\t"
+ : "=r" (ret), [newcpsr] "=r" (newcpsr)
+ : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3),
+ [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
+ return ret;
+}
+
+static inline long long __kprobes
+insnslot_llret_4arg_rwflags(long r0, long r1, long r2, long r3, long *cpsr,
+ insn_llret_4arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long rr2 asm("r2") = r2;
+ register long rr3 asm("r3") = r3;
+ register long ret0 asm("r0");
+ register long ret1 asm("r1");
+ long oldcpsr = *cpsr;
+ long newcpsr;
+ union reg_pair fnr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[oldcpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ "mrs %[newcpsr], cpsr \n\t"
+ : "=r" (ret0), "=r" (ret1), [newcpsr] "=r" (newcpsr)
+ : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3),
+ [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
+ fnr.r0 = ret0;
+ fnr.r1 = ret1;
+ return fnr.dr;
+}
+
+/*
+ * To avoid the complications of mimicing single-stepping on a
+ * processor without a Next-PC or a single-step mode, and to
+ * avoid having to deal with the side-effects of boosting, we
+ * simulate or emulate (almost) all ARM instructions.
+ *
+ * "Simulation" is where the instruction's behavior is duplicated in
+ * C code. "Emulation" is where the original instruction is rewritten
+ * and executed, often by altering its registers.
+ *
+ * By having all behavior of the kprobe'd instruction completed before
+ * returning from the kprobe_handler(), all locks (scheduler and
+ * interrupt) can safely be released. There is no need for secondary
+ * breakpoints, no race with MP or preemptable kernels, nor having to
+ * clean up resources counts at a later time impacting overall system
+ * performance. By rewriting the instruction, only the minimum registers
+ * need to be loaded and saved back optimizing performance.
+ *
+ * Calling the insnslot_*_rwflags version of a function doesn't hurt
+ * anything even when the CPSR flags aren't updated by the
+ * instruction. It's just a little slower in return for saving
+ * a little space by not having a duplicate function that doesn't
+ * update the flags. (The same optimization can be said for
+ * instructions that do or don't perform register writeback)
+ * Also, instructions can either read the flags, only write the
+ * flags, or read and write the flags. To save combinations
+ * rather than for sheer performance, flag functions just assume
+ * read and write of flags.
+ */
+
+static void __kprobes simulate_bbl(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ long iaddr = (long)p->addr;
+ int disp = branch_displacement(insn);
+
+ if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
+ return;
+
+ if (insn & (1 << 24))
+ regs->ARM_lr = iaddr + 4;
+
+ regs->ARM_pc = iaddr + 8 + disp;
+}
+
+static void __kprobes simulate_blx1(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ long iaddr = (long)p->addr;
+ int disp = branch_displacement(insn);
+
+ regs->ARM_lr = iaddr + 4;
+ regs->ARM_pc = iaddr + 8 + disp + ((insn >> 23) & 0x2);
+ regs->ARM_cpsr |= PSR_T_BIT;
+}
+
+static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rm = insn & 0xf;
+ long rmv = regs->uregs[rm];
+
+ if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
+ return;
+
+ if (insn & (1 << 5))
+ regs->ARM_lr = (long)p->addr + 4;
+
+ regs->ARM_pc = rmv & ~0x1;
+ regs->ARM_cpsr &= ~PSR_T_BIT;
+ if (rmv & 0x1)
+ regs->ARM_cpsr |= PSR_T_BIT;
+}
+
+static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rn = (insn >> 16) & 0xf;
+ int lbit = insn & (1 << 20);
+ int wbit = insn & (1 << 21);
+ int ubit = insn & (1 << 23);
+ int pbit = insn & (1 << 24);
+ long *addr = (long *)regs->uregs[rn];
+ int reg_bit_vector;
+ int reg_count;
+
+ if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
+ return;
+
+ reg_count = 0;
+ reg_bit_vector = insn & 0xffff;
+ while (reg_bit_vector) {
+ reg_bit_vector &= (reg_bit_vector - 1);
+ ++reg_count;
+ }
+
+ if (!ubit)
+ addr -= reg_count;
+ addr += (!pbit ^ !ubit);
+
+ reg_bit_vector = insn & 0xffff;
+ while (reg_bit_vector) {
+ int reg = __ffs(reg_bit_vector);
+ reg_bit_vector &= (reg_bit_vector - 1);
+ if (lbit)
+ regs->uregs[reg] = *addr++;
+ else
+ *addr++ = regs->uregs[reg];
+ }
+
+ if (wbit) {
+ if (!ubit)
+ addr -= reg_count;
+ addr -= (!pbit ^ !ubit);
+ regs->uregs[rn] = (long)addr;
+ }
+}
+
+static void __kprobes simulate_stm1_pc(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+
+ if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
+ return;
+
+ regs->ARM_pc = (long)p->addr + str_pc_offset;
+ simulate_ldm1stm1(p, regs);
+ regs->ARM_pc = (long)p->addr + 4;
+}
+
+static void __kprobes simulate_mov_ipsp(struct kprobe *p, struct pt_regs *regs)
+{
+ regs->uregs[12] = regs->uregs[13];
+}
+
+static void __kprobes emulate_ldcstc(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rn = (insn >> 16) & 0xf;
+ long rnv = regs->uregs[rn];
+
+ /* Save Rn in case of writeback. */
+ regs->uregs[rn] = insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_ldrd(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf; /* rm may be invalid, don't care. */
+
+ /* Not following the C calling convention here, so need asm(). */
+ __asm__ __volatile__ (
+ "ldr r0, %[rn] \n\t"
+ "ldr r1, %[rm] \n\t"
+ "msr cpsr_fs, %[cpsr]\n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[i_fn] \n\t"
+ "str r0, %[rn] \n\t" /* in case of writeback */
+ "str r2, %[rd0] \n\t"
+ "str r3, %[rd1] \n\t"
+ : [rn] "+m" (regs->uregs[rn]),
+ [rd0] "=m" (regs->uregs[rd]),
+ [rd1] "=m" (regs->uregs[rd+1])
+ : [rm] "m" (regs->uregs[rm]),
+ [cpsr] "r" (regs->ARM_cpsr),
+ [i_fn] "r" (i_fn)
+ : "r0", "r1", "r2", "r3", "lr", "cc"
+ );
+}
+
+static void __kprobes emulate_strd(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_4arg_fn_t *i_fn = (insn_4arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+ long rnv = regs->uregs[rn];
+ long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */
+
+ regs->uregs[rn] = insnslot_4arg_rflags(rnv, rmv, regs->uregs[rd],
+ regs->uregs[rd+1],
+ regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_llret_3arg_fn_t *i_fn = (insn_llret_3arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ union reg_pair fnr;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+ long rdv;
+ long rnv = regs->uregs[rn];
+ long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */
+ long cpsr = regs->ARM_cpsr;
+
+ fnr.dr = insnslot_llret_3arg_rflags(rnv, 0, rmv, cpsr, i_fn);
+ regs->uregs[rn] = fnr.r0; /* Save Rn in case of writeback. */
+ rdv = fnr.r1;
+
+ if (rd == 15) {
+#if __LINUX_ARM_ARCH__ >= 5
+ cpsr &= ~PSR_T_BIT;
+ if (rdv & 0x1)
+ cpsr |= PSR_T_BIT;
+ regs->ARM_cpsr = cpsr;
+ rdv &= ~0x1;
+#else
+ rdv &= ~0x2;
+#endif
+ }
+ regs->uregs[rd] = rdv;
+}
+
+static void __kprobes emulate_str(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ long iaddr = (long)p->addr;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+ long rdv = (rd == 15) ? iaddr + str_pc_offset : regs->uregs[rd];
+ long rnv = (rn == 15) ? iaddr + 8 : regs->uregs[rn];
+ long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */
+
+ /* Save Rn in case of writeback. */
+ regs->uregs[rn] =
+ insnslot_3arg_rflags(rnv, rdv, rmv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_mrrc(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_llret_0arg_fn_t *i_fn = (insn_llret_0arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ union reg_pair fnr;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+
+ fnr.dr = insnslot_llret_0arg_rflags(regs->ARM_cpsr, i_fn);
+ regs->uregs[rn] = fnr.r0;
+ regs->uregs[rd] = fnr.r1;
+}
+
+static void __kprobes emulate_mcrr(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ long rnv = regs->uregs[rn];
+ long rdv = regs->uregs[rd];
+
+ insnslot_2arg_rflags(rnv, rdv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_sat(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rm = insn & 0xf;
+ long rmv = regs->uregs[rm];
+
+ /* Writes Q flag */
+ regs->uregs[rd] = insnslot_1arg_rwflags(rmv, ®s->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_sel(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+ long rnv = regs->uregs[rn];
+ long rmv = regs->uregs[rm];
+
+ /* Reads GE bits */
+ regs->uregs[rd] = insnslot_2arg_rflags(rnv, rmv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_none(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_0arg_fn_t *i_fn = (insn_0arg_fn_t *)&p->ainsn.insn[0];
+
+ insnslot_0arg_rflags(regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_rd12(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_0arg_fn_t *i_fn = (insn_0arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+
+ regs->uregs[rd] = insnslot_0arg_rflags(regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_ird12(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int ird = (insn >> 12) & 0xf;
+
+ insnslot_1arg_rflags(regs->uregs[ird], regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_rn16(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rn = (insn >> 16) & 0xf;
+ long rnv = regs->uregs[rn];
+
+ insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_rd12rm0(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rm = insn & 0xf;
+ long rmv = regs->uregs[rm];
+
+ regs->uregs[rd] = insnslot_1arg_rflags(rmv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_rd12rn16rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+ long rnv = regs->uregs[rn];
+ long rmv = regs->uregs[rm];
+
+ regs->uregs[rd] =
+ insnslot_2arg_rwflags(rnv, rmv, ®s->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_rd16rn12rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 16) & 0xf;
+ int rn = (insn >> 12) & 0xf;
+ int rs = (insn >> 8) & 0xf;
+ int rm = insn & 0xf;
+ long rnv = regs->uregs[rn];
+ long rsv = regs->uregs[rs];
+ long rmv = regs->uregs[rm];
+
+ regs->uregs[rd] =
+ insnslot_3arg_rwflags(rnv, rsv, rmv, ®s->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_rd16rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 16) & 0xf;
+ int rs = (insn >> 8) & 0xf;
+ int rm = insn & 0xf;
+ long rsv = regs->uregs[rs];
+ long rmv = regs->uregs[rm];
+
+ regs->uregs[rd] =
+ insnslot_2arg_rwflags(rsv, rmv, ®s->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_rdhi16rdlo12rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_llret_4arg_fn_t *i_fn = (insn_llret_4arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ union reg_pair fnr;
+ int rdhi = (insn >> 16) & 0xf;
+ int rdlo = (insn >> 12) & 0xf;
+ int rs = (insn >> 8) & 0xf;
+ int rm = insn & 0xf;
+ long rsv = regs->uregs[rs];
+ long rmv = regs->uregs[rm];
+
+ fnr.dr = insnslot_llret_4arg_rwflags(regs->uregs[rdhi],
+ regs->uregs[rdlo], rsv, rmv,
+ ®s->ARM_cpsr, i_fn);
+ regs->uregs[rdhi] = fnr.r0;
+ regs->uregs[rdlo] = fnr.r1;
+}
+
+static void __kprobes
+emulate_alu_imm_rflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn];
+
+ regs->uregs[rd] = insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_alu_imm_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn];
+
+ regs->uregs[rd] = insnslot_1arg_rwflags(rnv, ®s->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_alu_rflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ long ppc = (long)p->addr + 8;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf; /* rn/rnv/rs/rsv may be */
+ int rs = (insn >> 8) & 0xf; /* invalid, don't care. */
+ int rm = insn & 0xf;
+ long rnv = (rn == 15) ? ppc : regs->uregs[rn];
+ long rmv = (rm == 15) ? ppc : regs->uregs[rm];
+ long rsv = regs->uregs[rs];
+
+ regs->uregs[rd] =
+ insnslot_3arg_rflags(rnv, rmv, rsv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_alu_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ long ppc = (long)p->addr + 8;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf; /* rn/rnv/rs/rsv may be */
+ int rs = (insn >> 8) & 0xf; /* invalid, don't care. */
+ int rm = insn & 0xf;
+ long rnv = (rn == 15) ? ppc : regs->uregs[rn];
+ long rmv = (rm == 15) ? ppc : regs->uregs[rm];
+ long rsv = regs->uregs[rs];
+
+ regs->uregs[rd] =
+ insnslot_3arg_rwflags(rnv, rmv, rsv, ®s->ARM_cpsr, i_fn);
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_ldr_str(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ int ibit = (insn & (1 << 26)) ? 25 : 22;
+
+ insn &= 0xfff00fff;
+ insn |= 0x00001000; /* Rn = r0, Rd = r1 */
+ if (insn & (1 << ibit)) {
+ insn &= ~0xf;
+ insn |= 2; /* Rm = r2 */
+ }
+ asi->insn[0] = insn;
+ asi->insn_handler = (insn & (1 << 20)) ? emulate_ldr : emulate_str;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rd12rm0(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rd12rm0;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rd12(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ insn &= 0xffff0fff; /* Rd = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rd12;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rd12rn16rm0_wflags(kprobe_opcode_t insn,
+ struct arch_specific_insn *asi)
+{
+ insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */
+ insn |= 0x00000001; /* Rm = r1 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rd12rn16rm0_rwflags;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rd16rs8rm0_wflags(kprobe_opcode_t insn,
+ struct arch_specific_insn *asi)
+{
+ insn &= 0xfff0f0f0; /* Rd = r0, Rs = r0 */
+ insn |= 0x00000001; /* Rm = r1 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rd16rs8rm0_rwflags;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rd16rn12rs8rm0_wflags(kprobe_opcode_t insn,
+ struct arch_specific_insn *asi)
+{
+ insn &= 0xfff000f0; /* Rd = r0, Rn = r0 */
+ insn |= 0x00000102; /* Rs = r1, Rm = r2 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rd16rn12rs8rm0_rwflags;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rdhi16rdlo12rs8rm0_wflags(kprobe_opcode_t insn,
+ struct arch_specific_insn *asi)
+{
+ insn &= 0xfff000f0; /* RdHi = r0, RdLo = r1 */
+ insn |= 0x00001203; /* Rs = r2, Rm = r3 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rdhi16rdlo12rs8rm0_rwflags;
+ return INSN_GOOD;
+}
+
+/*
+ * For the instruction masking and comparisons in all the "space_*"
+ * functions below, Do _not_ rearrange the order of tests unless
+ * you're very, very sure of what you are doing. For the sake of
+ * efficiency, the masks for some tests sometimes assume other test
+ * have been done prior to them so the number of patterns to test
+ * for an instruction set can be as broad as possible to reduce the
+ * number of tests needed.
+ */
+
+static enum kprobe_insn __kprobes
+space_1111(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* CPS mmod == 1 : 1111 0001 0000 xx10 xxxx xxxx xx0x xxxx */
+ /* RFE : 1111 100x x0x1 xxxx xxxx 1010 xxxx xxxx */
+ /* SRS : 1111 100x x1x0 1101 xxxx 0101 xxxx xxxx */
+ if ((insn & 0xfff30020) == 0xf1020000 ||
+ (insn & 0xfe500f00) == 0xf8100a00 ||
+ (insn & 0xfe5f0f00) == 0xf84d0500)
+ return INSN_REJECTED;
+
+ /* PLD : 1111 01x1 x101 xxxx xxxx xxxx xxxx xxxx : */
+ if ((insn & 0xfd700000) == 0xf4500000) {
+ insn &= 0xfff0ffff; /* Rn = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rn16;
+ return INSN_GOOD;
+ }
+
+ /* BLX(1) : 1111 101x xxxx xxxx xxxx xxxx xxxx xxxx : */
+ if ((insn & 0xfe000000) == 0xfa000000) {
+ asi->insn_handler = simulate_blx1;
+ return INSN_GOOD_NO_SLOT;
+ }
+
+ /* SETEND : 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */
+ /* CDP2 : 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
+ if ((insn & 0xffff00f0) == 0xf1010000 ||
+ (insn & 0xff000010) == 0xfe000000) {
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_none;
+ return INSN_GOOD;
+ }
+
+ /* MCRR2 : 1111 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */
+ /* MRRC2 : 1111 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */
+ if ((insn & 0xffe00000) == 0xfc400000) {
+ insn &= 0xfff00fff; /* Rn = r0 */
+ insn |= 0x00001000; /* Rd = r1 */
+ asi->insn[0] = insn;
+ asi->insn_handler =
+ (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr;
+ return INSN_GOOD;
+ }
+
+ /* LDC2 : 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
+ /* STC2 : 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
+ if ((insn & 0xfe000000) == 0xfc000000) {
+ insn &= 0xfff0ffff; /* Rn = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_ldcstc;
+ return INSN_GOOD;
+ }
+
+ /* MCR2 : 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
+ /* MRC2 : 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
+ insn &= 0xffff0fff; /* Rd = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx xxx0 xxxx */
+ if ((insn & 0x0f900010) == 0x01000000) {
+
+ /* BXJ : cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */
+ /* MSR : cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */
+ if ((insn & 0x0ff000f0) == 0x01200020 ||
+ (insn & 0x0fb000f0) == 0x01200000)
+ return INSN_REJECTED;
+
+ /* MRS : cccc 0001 0x00 xxxx xxxx xxxx 0000 xxxx */
+ if ((insn & 0x0fb00010) == 0x01000000)
+ return prep_emulate_rd12(insn, asi);
+
+ /* SMLALxy : cccc 0001 0100 xxxx xxxx xxxx 1xx0 xxxx */
+ if ((insn & 0x0ff00090) == 0x01400080)
+ return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi);
+
+ /* SMULWy : cccc 0001 0010 xxxx xxxx xxxx 1x10 xxxx */
+ /* SMULxy : cccc 0001 0110 xxxx xxxx xxxx 1xx0 xxxx */
+ if ((insn & 0x0ff000b0) == 0x012000a0 ||
+ (insn & 0x0ff00090) == 0x01600080)
+ return prep_emulate_rd16rs8rm0_wflags(insn, asi);
+
+ /* SMLAxy : cccc 0001 0000 xxxx xxxx xxxx 1xx0 xxxx : Q */
+ /* SMLAWy : cccc 0001 0010 xxxx xxxx xxxx 0x00 xxxx : Q */
+ return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+
+ }
+
+ /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx 0xx1 xxxx */
+ else if ((insn & 0x0f900090) == 0x01000010) {
+
+ /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
+ if ((insn & 0xfff000f0) == 0xe1200070)
+ return INSN_REJECTED;
+
+ /* BLX(2) : cccc 0001 0010 xxxx xxxx xxxx 0011 xxxx */
+ /* BX : cccc 0001 0010 xxxx xxxx xxxx 0001 xxxx */
+ if ((insn & 0x0ff000d0) == 0x01200010) {
+ asi->insn[0] = truecc_insn(insn);
+ asi->insn_handler = simulate_blx2bx;
+ return INSN_GOOD;
+ }
+
+ /* CLZ : cccc 0001 0110 xxxx xxxx xxxx 0001 xxxx */
+ if ((insn & 0x0ff000f0) == 0x01600010)
+ return prep_emulate_rd12rm0(insn, asi);
+
+ /* QADD : cccc 0001 0000 xxxx xxxx xxxx 0101 xxxx :Q */
+ /* QSUB : cccc 0001 0010 xxxx xxxx xxxx 0101 xxxx :Q */
+ /* QDADD : cccc 0001 0100 xxxx xxxx xxxx 0101 xxxx :Q */
+ /* QDSUB : cccc 0001 0110 xxxx xxxx xxxx 0101 xxxx :Q */
+ return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+ }
+
+ /* cccc 0000 xxxx xxxx xxxx xxxx xxxx 1001 xxxx */
+ else if ((insn & 0x0f000090) == 0x00000090) {
+
+ /* MUL : cccc 0000 0000 xxxx xxxx xxxx 1001 xxxx : */
+ /* MULS : cccc 0000 0001 xxxx xxxx xxxx 1001 xxxx :cc */
+ /* MLA : cccc 0000 0010 xxxx xxxx xxxx 1001 xxxx : */
+ /* MLAS : cccc 0000 0011 xxxx xxxx xxxx 1001 xxxx :cc */
+ /* UMAAL : cccc 0000 0100 xxxx xxxx xxxx 1001 xxxx : */
+ /* UMULL : cccc 0000 1000 xxxx xxxx xxxx 1001 xxxx : */
+ /* UMULLS : cccc 0000 1001 xxxx xxxx xxxx 1001 xxxx :cc */
+ /* UMLAL : cccc 0000 1010 xxxx xxxx xxxx 1001 xxxx : */
+ /* UMLALS : cccc 0000 1011 xxxx xxxx xxxx 1001 xxxx :cc */
+ /* SMULL : cccc 0000 1100 xxxx xxxx xxxx 1001 xxxx : */
+ /* SMULLS : cccc 0000 1101 xxxx xxxx xxxx 1001 xxxx :cc */
+ /* SMLAL : cccc 0000 1110 xxxx xxxx xxxx 1001 xxxx : */
+ /* SMLALS : cccc 0000 1111 xxxx xxxx xxxx 1001 xxxx :cc */
+ if ((insn & 0x0fe000f0) == 0x00000090) {
+ return prep_emulate_rd16rs8rm0_wflags(insn, asi);
+ } else if ((insn & 0x0fe000f0) == 0x00200090) {
+ return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+ } else {
+ return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi);
+ }
+ }
+
+ /* cccc 000x xxxx xxxx xxxx xxxx xxxx 1xx1 xxxx */
+ else if ((insn & 0x0e000090) == 0x00000090) {
+
+ /* SWP : cccc 0001 0000 xxxx xxxx xxxx 1001 xxxx */
+ /* SWPB : cccc 0001 0100 xxxx xxxx xxxx 1001 xxxx */
+ /* LDRD : cccc 000x xxx0 xxxx xxxx xxxx 1101 xxxx */
+ /* STRD : cccc 000x xxx0 xxxx xxxx xxxx 1111 xxxx */
+ /* STREX : cccc 0001 1000 xxxx xxxx xxxx 1001 xxxx */
+ /* LDREX : cccc 0001 1001 xxxx xxxx xxxx 1001 xxxx */
+ /* LDRH : cccc 000x xxx1 xxxx xxxx xxxx 1011 xxxx */
+ /* STRH : cccc 000x xxx0 xxxx xxxx xxxx 1011 xxxx */
+ /* LDRSB : cccc 000x xxx1 xxxx xxxx xxxx 1101 xxxx */
+ /* LDRSH : cccc 000x xxx1 xxxx xxxx xxxx 1111 xxxx */
+ if ((insn & 0x0fb000f0) == 0x01000090) {
+ /* SWP/SWPB */
+ return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+ } else if ((insn & 0x0e1000d0) == 0x00000d0) {
+ /* STRD/LDRD */
+ insn &= 0xfff00fff;
+ insn |= 0x00002000; /* Rn = r0, Rd = r2 */
+ if (insn & (1 << 22)) {
+ /* I bit */
+ insn &= ~0xf;
+ insn |= 1; /* Rm = r1 */
+ }
+ asi->insn[0] = insn;
+ asi->insn_handler =
+ (insn & (1 << 5)) ? emulate_strd : emulate_ldrd;
+ return INSN_GOOD;
+ }
+
+ return prep_emulate_ldr_str(insn, asi);
+ }
+
+ /* cccc 000x xxxx xxxx xxxx xxxx xxxx xxxx xxxx */
+
+ /*
+ * ALU op with S bit and Rd == 15 :
+ * cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx
+ */
+ if ((insn & 0x0e10f000) == 0x0010f000)
+ return INSN_REJECTED;
+
+ /*
+ * "mov ip, sp" is the most common kprobe'd instruction by far.
+ * Check and optimize for it explicitly.
+ */
+ if (insn == 0xe1a0c00d) {
+ asi->insn_handler = simulate_mov_ipsp;
+ return INSN_GOOD_NO_SLOT;
+ }
+
+ /*
+ * Data processing: Immediate-shift / Register-shift
+ * ALU op : cccc 000x xxxx xxxx xxxx xxxx xxxx xxxx
+ * CPY : cccc 0001 1010 xxxx xxxx 0000 0000 xxxx
+ * MOV : cccc 0001 101x xxxx xxxx xxxx xxxx xxxx
+ * *S (bit 20) updates condition codes
+ * ADC/SBC/RSC reads the C flag
+ */
+ insn &= 0xfff00ff0; /* Rn = r0, Rd = r0 */
+ insn |= 0x00000001; /* Rm = r1 */
+ if (insn & 0x010) {
+ insn &= 0xfffff0ff; /* register shift */
+ insn |= 0x00000200; /* Rs = r2 */
+ }
+ asi->insn[0] = insn;
+ asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
+ emulate_alu_rwflags : emulate_alu_rflags;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /*
+ * MSR : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx
+ * Undef : cccc 0011 0x00 xxxx xxxx xxxx xxxx xxxx
+ * ALU op with S bit and Rd == 15 :
+ * cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx
+ */
+ if ((insn & 0x0f900000) == 0x03200000 || /* MSR & Undef */
+ (insn & 0x0e10f000) == 0x0210f000) /* ALU s-bit, R15 */
+ return INSN_REJECTED;
+
+ /*
+ * Data processing: 32-bit Immediate
+ * ALU op : cccc 001x xxxx xxxx xxxx xxxx xxxx xxxx
+ * MOV : cccc 0011 101x xxxx xxxx xxxx xxxx xxxx
+ * *S (bit 20) updates condition codes
+ * ADC/SBC/RSC reads the C flag
+ */
+ insn &= 0xfff00ff0; /* Rn = r0, Rd = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
+ emulate_alu_imm_rwflags : emulate_alu_imm_rflags;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* SEL : cccc 0110 1000 xxxx xxxx xxxx 1011 xxxx GE: !!! */
+ if ((insn & 0x0ff000f0) == 0x068000b0) {
+ insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */
+ insn |= 0x00000001; /* Rm = r1 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_sel;
+ return INSN_GOOD;
+ }
+
+ /* SSAT : cccc 0110 101x xxxx xxxx xxxx xx01 xxxx :Q */
+ /* USAT : cccc 0110 111x xxxx xxxx xxxx xx01 xxxx :Q */
+ /* SSAT16 : cccc 0110 1010 xxxx xxxx xxxx 0011 xxxx :Q */
+ /* USAT16 : cccc 0110 1110 xxxx xxxx xxxx 0011 xxxx :Q */
+ if ((insn & 0x0fa00030) == 0x06a00010 ||
+ (insn & 0x0fb000f0) == 0x06a00030) {
+ insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_sat;
+ return INSN_GOOD;
+ }
+
+ /* REV : cccc 0110 1011 xxxx xxxx xxxx 0011 xxxx */
+ /* REV16 : cccc 0110 1011 xxxx xxxx xxxx 1011 xxxx */
+ /* REVSH : cccc 0110 1111 xxxx xxxx xxxx 1011 xxxx */
+ if ((insn & 0x0ff00070) == 0x06b00030 ||
+ (insn & 0x0ff000f0) == 0x06f000b0)
+ return prep_emulate_rd12rm0(insn, asi);
+
+ /* SADD16 : cccc 0110 0001 xxxx xxxx xxxx 0001 xxxx :GE */
+ /* SADDSUBX : cccc 0110 0001 xxxx xxxx xxxx 0011 xxxx :GE */
+ /* SSUBADDX : cccc 0110 0001 xxxx xxxx xxxx 0101 xxxx :GE */
+ /* SSUB16 : cccc 0110 0001 xxxx xxxx xxxx 0111 xxxx :GE */
+ /* SADD8 : cccc 0110 0001 xxxx xxxx xxxx 1001 xxxx :GE */
+ /* SSUB8 : cccc 0110 0001 xxxx xxxx xxxx 1111 xxxx :GE */
+ /* QADD16 : cccc 0110 0010 xxxx xxxx xxxx 0001 xxxx : */
+ /* QADDSUBX : cccc 0110 0010 xxxx xxxx xxxx 0011 xxxx : */
+ /* QSUBADDX : cccc 0110 0010 xxxx xxxx xxxx 0101 xxxx : */
+ /* QSUB16 : cccc 0110 0010 xxxx xxxx xxxx 0111 xxxx : */
+ /* QADD8 : cccc 0110 0010 xxxx xxxx xxxx 1001 xxxx : */
+ /* QSUB8 : cccc 0110 0010 xxxx xxxx xxxx 1111 xxxx : */
+ /* SHADD16 : cccc 0110 0011 xxxx xxxx xxxx 0001 xxxx : */
+ /* SHADDSUBX : cccc 0110 0011 xxxx xxxx xxxx 0011 xxxx : */
+ /* SHSUBADDX : cccc 0110 0011 xxxx xxxx xxxx 0101 xxxx : */
+ /* SHSUB16 : cccc 0110 0011 xxxx xxxx xxxx 0111 xxxx : */
+ /* SHADD8 : cccc 0110 0011 xxxx xxxx xxxx 1001 xxxx : */
+ /* SHSUB8 : cccc 0110 0011 xxxx xxxx xxxx 1111 xxxx : */
+ /* UADD16 : cccc 0110 0101 xxxx xxxx xxxx 0001 xxxx :GE */
+ /* UADDSUBX : cccc 0110 0101 xxxx xxxx xxxx 0011 xxxx :GE */
+ /* USUBADDX : cccc 0110 0101 xxxx xxxx xxxx 0101 xxxx :GE */
+ /* USUB16 : cccc 0110 0101 xxxx xxxx xxxx 0111 xxxx :GE */
+ /* UADD8 : cccc 0110 0101 xxxx xxxx xxxx 1001 xxxx :GE */
+ /* USUB8 : cccc 0110 0101 xxxx xxxx xxxx 1111 xxxx :GE */
+ /* UQADD16 : cccc 0110 0110 xxxx xxxx xxxx 0001 xxxx : */
+ /* UQADDSUBX : cccc 0110 0110 xxxx xxxx xxxx 0011 xxxx : */
+ /* UQSUBADDX : cccc 0110 0110 xxxx xxxx xxxx 0101 xxxx : */
+ /* UQSUB16 : cccc 0110 0110 xxxx xxxx xxxx 0111 xxxx : */
+ /* UQADD8 : cccc 0110 0110 xxxx xxxx xxxx 1001 xxxx : */
+ /* UQSUB8 : cccc 0110 0110 xxxx xxxx xxxx 1111 xxxx : */
+ /* UHADD16 : cccc 0110 0111 xxxx xxxx xxxx 0001 xxxx : */
+ /* UHADDSUBX : cccc 0110 0111 xxxx xxxx xxxx 0011 xxxx : */
+ /* UHSUBADDX : cccc 0110 0111 xxxx xxxx xxxx 0101 xxxx : */
+ /* UHSUB16 : cccc 0110 0111 xxxx xxxx xxxx 0111 xxxx : */
+ /* UHADD8 : cccc 0110 0111 xxxx xxxx xxxx 1001 xxxx : */
+ /* UHSUB8 : cccc 0110 0111 xxxx xxxx xxxx 1111 xxxx : */
+ /* PKHBT : cccc 0110 1000 xxxx xxxx xxxx x001 xxxx : */
+ /* PKHTB : cccc 0110 1000 xxxx xxxx xxxx x101 xxxx : */
+ /* SXTAB16 : cccc 0110 1000 xxxx xxxx xxxx 0111 xxxx : */
+ /* SXTB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */
+ /* SXTAB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */
+ /* SXTAH : cccc 0110 1011 xxxx xxxx xxxx 0111 xxxx : */
+ /* UXTAB16 : cccc 0110 1100 xxxx xxxx xxxx 0111 xxxx : */
+ /* UXTAB : cccc 0110 1110 xxxx xxxx xxxx 0111 xxxx : */
+ /* UXTAH : cccc 0110 1111 xxxx xxxx xxxx 0111 xxxx : */
+ return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_0111__1(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* Undef : cccc 0111 1111 xxxx xxxx xxxx 1111 xxxx */
+ if ((insn & 0x0ff000f0) == 0x03f000f0)
+ return INSN_REJECTED;
+
+ /* USADA8 : cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx */
+ /* USAD8 : cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx */
+ if ((insn & 0x0ff000f0) == 0x07800010)
+ return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+
+ /* SMLALD : cccc 0111 0100 xxxx xxxx xxxx 00x1 xxxx */
+ /* SMLSLD : cccc 0111 0100 xxxx xxxx xxxx 01x1 xxxx */
+ if ((insn & 0x0ff00090) == 0x07400010)
+ return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi);
+
+ /* SMLAD : cccc 0111 0000 xxxx xxxx xxxx 00x1 xxxx :Q */
+ /* SMLSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx :Q */
+ /* SMMLA : cccc 0111 0101 xxxx xxxx xxxx 00x1 xxxx : */
+ /* SMMLS : cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx : */
+ if ((insn & 0x0ff00090) == 0x07000010 ||
+ (insn & 0x0ff000d0) == 0x07500010 ||
+ (insn & 0x0ff000d0) == 0x075000d0)
+ return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+
+ /* SMUSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx : */
+ /* SMUAD : cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx :Q */
+ /* SMMUL : cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx : */
+ return prep_emulate_rd16rs8rm0_wflags(insn, asi);
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_01xx(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* LDR : cccc 01xx x0x1 xxxx xxxx xxxx xxxx xxxx */
+ /* LDRB : cccc 01xx x1x1 xxxx xxxx xxxx xxxx xxxx */
+ /* LDRBT : cccc 01x0 x111 xxxx xxxx xxxx xxxx xxxx */
+ /* LDRT : cccc 01x0 x011 xxxx xxxx xxxx xxxx xxxx */
+ /* STR : cccc 01xx x0x0 xxxx xxxx xxxx xxxx xxxx */
+ /* STRB : cccc 01xx x1x0 xxxx xxxx xxxx xxxx xxxx */
+ /* STRBT : cccc 01x0 x110 xxxx xxxx xxxx xxxx xxxx */
+ /* STRT : cccc 01x0 x010 xxxx xxxx xxxx xxxx xxxx */
+ return prep_emulate_ldr_str(insn, asi);
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_100x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* LDM(2) : cccc 100x x101 xxxx 0xxx xxxx xxxx xxxx */
+ /* LDM(3) : cccc 100x x1x1 xxxx 1xxx xxxx xxxx xxxx */
+ if ((insn & 0x0e708000) == 0x85000000 ||
+ (insn & 0x0e508000) == 0x85010000)
+ return INSN_REJECTED;
+
+ /* LDM(1) : cccc 100x x0x1 xxxx xxxx xxxx xxxx xxxx */
+ /* STM(1) : cccc 100x x0x0 xxxx xxxx xxxx xxxx xxxx */
+ asi->insn[0] = truecc_insn(insn);
+ asi->insn_handler = ((insn & 0x108000) == 0x008000) ? /* STM & R15 */
+ simulate_stm1_pc : simulate_ldm1stm1;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_101x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* B : cccc 1010 xxxx xxxx xxxx xxxx xxxx xxxx */
+ /* BL : cccc 1011 xxxx xxxx xxxx xxxx xxxx xxxx */
+ asi->insn[0] = truecc_insn(insn);
+ asi->insn_handler = simulate_bbl;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_1100_010x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* MCRR : cccc 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */
+ /* MRRC : cccc 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */
+ insn &= 0xfff00fff;
+ insn |= 0x00001000; /* Rn = r0, Rd = r1 */
+ asi->insn[0] = insn;
+ asi->insn_handler = (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_110x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* LDC : cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
+ /* STC : cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
+ insn &= 0xfff0ffff; /* Rn = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_ldcstc;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_111x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
+ /* SWI : cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */
+ if ((insn & 0xfff000f0) == 0xe1200070 ||
+ (insn & 0x0f000000) == 0x0f000000)
+ return INSN_REJECTED;
+
+ /* CDP : cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
+ if ((insn & 0x0f000010) == 0x0e000000) {
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_none;
+ return INSN_GOOD;
+ }
+
+ /* MCR : cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
+ /* MRC : cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
+ insn &= 0xffff0fff; /* Rd = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12;
+ return INSN_GOOD;
+}
+
+/* Return:
+ * INSN_REJECTED If instruction is one not allowed to kprobe,
+ * INSN_GOOD If instruction is supported and uses instruction slot,
+ * INSN_GOOD_NO_SLOT If instruction is supported but doesn't use its slot.
+ *
+ * For instructions we don't want to kprobe (INSN_REJECTED return result):
+ * These are generally ones that modify the processor state making
+ * them "hard" to simulate such as switches processor modes or
+ * make accesses in alternate modes. Any of these could be simulated
+ * if the work was put into it, but low return considering they
+ * should also be very rare.
+ */
+enum kprobe_insn __kprobes
+arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ asi->insn[1] = KPROBE_RETURN_INSTRUCTION;
+
+ if ((insn & 0xf0000000) == 0xf0000000) {
+
+ return space_1111(insn, asi);
+
+ } else if ((insn & 0x0e000000) == 0x00000000) {
+
+ return space_cccc_000x(insn, asi);
+
+ } else if ((insn & 0x0e000000) == 0x02000000) {
+
+ return space_cccc_001x(insn, asi);
+
+ } else if ((insn & 0x0f000010) == 0x06000010) {
+
+ return space_cccc_0110__1(insn, asi);
+
+ } else if ((insn & 0x0f000010) == 0x07000010) {
+
+ return space_cccc_0111__1(insn, asi);
+
+ } else if ((insn & 0x0c000000) == 0x04000000) {
+
+ return space_cccc_01xx(insn, asi);
+
+ } else if ((insn & 0x0e000000) == 0x08000000) {
+
+ return space_cccc_100x(insn, asi);
+
+ } else if ((insn & 0x0e000000) == 0x0a000000) {
+
+ return space_cccc_101x(insn, asi);
+
+ } else if ((insn & 0x0fe00000) == 0x0c400000) {
+
+ return space_cccc_1100_010x(insn, asi);
+
+ } else if ((insn & 0x0e000000) == 0x0c400000) {
+
+ return space_cccc_110x(insn, asi);
+
+ }
+
+ return space_cccc_111x(insn, asi);
+}
+
+void __init arm_kprobe_decode_init(void)
+{
+ find_str_pc_offset();
+}
+
+
+/*
+ * All ARM instructions listed below.
+ *
+ * Instructions and their general purpose registers are given.
+ * If a particular register may not use R15, it is prefixed with a "!".
+ * If marked with a "*" means the value returned by reading R15
+ * is implementation defined.
+ *
+ * ADC/ADD/AND/BIC/CMN/CMP/EOR/MOV/MVN/ORR/RSB/RSC/SBC/SUB/TEQ
+ * TST: Rd, Rn, Rm, !Rs
+ * BX: Rm
+ * BLX(2): !Rm
+ * BX: Rm (R15 legal, but discouraged)
+ * BXJ: !Rm,
+ * CLZ: !Rd, !Rm
+ * CPY: Rd, Rm
+ * LDC/2,STC/2 immediate offset & unindex: Rn
+ * LDC/2,STC/2 immediate pre/post-indexed: !Rn
+ * LDM(1/3): !Rn, register_list
+ * LDM(2): !Rn, !register_list
+ * LDR,STR,PLD immediate offset: Rd, Rn
+ * LDR,STR,PLD register offset: Rd, Rn, !Rm
+ * LDR,STR,PLD scaled register offset: Rd, !Rn, !Rm
+ * LDR,STR immediate pre/post-indexed: Rd, !Rn
+ * LDR,STR register pre/post-indexed: Rd, !Rn, !Rm
+ * LDR,STR scaled register pre/post-indexed: Rd, !Rn, !Rm
+ * LDRB,STRB immediate offset: !Rd, Rn
+ * LDRB,STRB register offset: !Rd, Rn, !Rm
+ * LDRB,STRB scaled register offset: !Rd, !Rn, !Rm
+ * LDRB,STRB immediate pre/post-indexed: !Rd, !Rn
+ * LDRB,STRB register pre/post-indexed: !Rd, !Rn, !Rm
+ * LDRB,STRB scaled register pre/post-indexed: !Rd, !Rn, !Rm
+ * LDRT,LDRBT,STRBT immediate pre/post-indexed: !Rd, !Rn
+ * LDRT,LDRBT,STRBT register pre/post-indexed: !Rd, !Rn, !Rm
+ * LDRT,LDRBT,STRBT scaled register pre/post-indexed: !Rd, !Rn, !Rm
+ * LDRH/SH/SB/D,STRH/SH/SB/D immediate offset: !Rd, Rn
+ * LDRH/SH/SB/D,STRH/SH/SB/D register offset: !Rd, Rn, !Rm
+ * LDRH/SH/SB/D,STRH/SH/SB/D immediate pre/post-indexed: !Rd, !Rn
+ * LDRH/SH/SB/D,STRH/SH/SB/D register pre/post-indexed: !Rd, !Rn, !Rm
+ * LDREX: !Rd, !Rn
+ * MCR/2: !Rd
+ * MCRR/2,MRRC/2: !Rd, !Rn
+ * MLA: !Rd, !Rn, !Rm, !Rs
+ * MOV: Rd
+ * MRC/2: !Rd (if Rd==15, only changes cond codes, not the register)
+ * MRS,MSR: !Rd
+ * MUL: !Rd, !Rm, !Rs
+ * PKH{BT,TB}: !Rd, !Rn, !Rm
+ * QDADD,[U]QADD/16/8/SUBX: !Rd, !Rm, !Rn
+ * QDSUB,[U]QSUB/16/8/ADDX: !Rd, !Rm, !Rn
+ * REV/16/SH: !Rd, !Rm
+ * RFE: !Rn
+ * {S,U}[H]ADD{16,8,SUBX},{S,U}[H]SUB{16,8,ADDX}: !Rd, !Rn, !Rm
+ * SEL: !Rd, !Rn, !Rm
+ * SMLA<x><y>,SMLA{D,W<y>},SMLSD,SMML{A,S}: !Rd, !Rn, !Rm, !Rs
+ * SMLAL<x><y>,SMLA{D,LD},SMLSLD,SMMULL,SMULW<y>: !RdHi, !RdLo, !Rm, !Rs
+ * SMMUL,SMUAD,SMUL<x><y>,SMUSD: !Rd, !Rm, !Rs
+ * SSAT/16: !Rd, !Rm
+ * STM(1/2): !Rn, register_list* (R15 in reg list not recommended)
+ * STRT immediate pre/post-indexed: Rd*, !Rn
+ * STRT register pre/post-indexed: Rd*, !Rn, !Rm
+ * STRT scaled register pre/post-indexed: Rd*, !Rn, !Rm
+ * STREX: !Rd, !Rn, !Rm
+ * SWP/B: !Rd, !Rn, !Rm
+ * {S,U}XTA{B,B16,H}: !Rd, !Rn, !Rm
+ * {S,U}XT{B,B16,H}: !Rd, !Rm
+ * UM{AA,LA,UL}L: !RdHi, !RdLo, !Rm, !Rs
+ * USA{D8,A8,T,T16}: !Rd, !Rm, !Rs
+ *
+ * May transfer control by writing R15 (possible mode changes or alternate
+ * mode accesses marked by "*"):
+ * ALU op (* with s-bit), B, BL, BKPT, BLX(1/2), BX, BXJ, CPS*, CPY,
+ * LDM(1), LDM(2/3)*, LDR, MOV, RFE*, SWI*
+ *
+ * Instructions that do not take general registers, nor transfer control:
+ * CDP/2, SETEND, SRS*
+ */
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
new file mode 100644
index 0000000..a22a98c
--- /dev/null
+++ b/arch/arm/kernel/kprobes.c
@@ -0,0 +1,447 @@
+/*
+ * arch/arm/kernel/kprobes.c
+ *
+ * Kprobes on ARM
+ *
+ * Abhishek Sagar <sagar.abhishek@gmail.com>
+ * Copyright (C) 2006, 2007 Motorola Inc.
+ *
+ * Nicolas Pitre <nico@marvell.com>
+ * Copyright (C) 2007 Marvell Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <linux/stringify.h>
+#include <asm/traps.h>
+#include <asm/cacheflush.h>
+
+#define MIN_STACK_SIZE(addr) \
+ min((unsigned long)MAX_STACK_SIZE, \
+ (unsigned long)current_thread_info() + THREAD_START_SP - (addr))
+
+#define flush_insns(addr, cnt) \
+ flush_icache_range((unsigned long)(addr), \
+ (unsigned long)(addr) + \
+ sizeof(kprobe_opcode_t) * (cnt))
+
+/* Used as a marker in ARM_pc to note when we're in a jprobe. */
+#define JPROBE_MAGIC_ADDR 0xffffffff
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+ kprobe_opcode_t insn;
+ kprobe_opcode_t tmp_insn[MAX_INSN_SIZE];
+ unsigned long addr = (unsigned long)p->addr;
+ int is;
+
+ if (addr & 0x3 || in_exception_text(addr))
+ return -EINVAL;
+
+ insn = *p->addr;
+ p->opcode = insn;
+ p->ainsn.insn = tmp_insn;
+
+ switch (arm_kprobe_decode_insn(insn, &p->ainsn)) {
+ case INSN_REJECTED: /* not supported */
+ return -EINVAL;
+
+ case INSN_GOOD: /* instruction uses slot */
+ p->ainsn.insn = get_insn_slot();
+ if (!p->ainsn.insn)
+ return -ENOMEM;
+ for (is = 0; is < MAX_INSN_SIZE; ++is)
+ p->ainsn.insn[is] = tmp_insn[is];
+ flush_insns(&p->ainsn.insn, MAX_INSN_SIZE);
+ break;
+
+ case INSN_GOOD_NO_SLOT: /* instruction doesn't need insn slot */
+ p->ainsn.insn = NULL;
+ break;
+ }
+
+ return 0;
+}
+
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+ *p->addr = KPROBE_BREAKPOINT_INSTRUCTION;
+ flush_insns(p->addr, 1);
+}
+
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+ *p->addr = p->opcode;
+ flush_insns(p->addr, 1);
+}
+
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+ if (p->ainsn.insn) {
+ mutex_lock(&kprobe_mutex);
+ free_insn_slot(p->ainsn.insn, 0);
+ mutex_unlock(&kprobe_mutex);
+ p->ainsn.insn = NULL;
+ }
+}
+
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+ kcb->prev_kprobe.kp = kprobe_running();
+ kcb->prev_kprobe.status = kcb->kprobe_status;
+}
+
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+ __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+ kcb->kprobe_status = kcb->prev_kprobe.status;
+}
+
+static void __kprobes set_current_kprobe(struct kprobe *p)
+{
+ __get_cpu_var(current_kprobe) = p;
+}
+
+static void __kprobes singlestep(struct kprobe *p, struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb)
+{
+ regs->ARM_pc += 4;
+ p->ainsn.insn_handler(p, regs);
+}
+
+/*
+ * Called with IRQs disabled. IRQs must remain disabled from that point
+ * all the way until processing this kprobe is complete. The current
+ * kprobes implementation cannot process more than one nested level of
+ * kprobe, and that level is reserved for user kprobe handlers, so we can't
+ * risk encountering a new kprobe in an interrupt handler.
+ */
+void __kprobes kprobe_handler(struct pt_regs *regs)
+{
+ struct kprobe *p, *cur;
+ struct kprobe_ctlblk *kcb;
+ kprobe_opcode_t *addr = (kprobe_opcode_t *)regs->ARM_pc;
+
+ kcb = get_kprobe_ctlblk();
+ cur = kprobe_running();
+ p = get_kprobe(addr);
+
+ if (p) {
+ if (cur) {
+ /* Kprobe is pending, so we're recursing. */
+ switch (kcb->kprobe_status) {
+ case KPROBE_HIT_ACTIVE:
+ case KPROBE_HIT_SSDONE:
+ /* A pre- or post-handler probe got us here. */
+ kprobes_inc_nmissed_count(p);
+ save_previous_kprobe(kcb);
+ set_current_kprobe(p);
+ kcb->kprobe_status = KPROBE_REENTER;
+ singlestep(p, regs, kcb);
+ restore_previous_kprobe(kcb);
+ break;
+ default:
+ /* impossible cases */
+ BUG();
+ }
+ } else {
+ set_current_kprobe(p);
+ kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
+ /*
+ * If we have no pre-handler or it returned 0, we
+ * continue with normal processing. If we have a
+ * pre-handler and it returned non-zero, it prepped
+ * for calling the break_handler below on re-entry,
+ * so get out doing nothing more here.
+ */
+ if (!p->pre_handler || !p->pre_handler(p, regs)) {
+ kcb->kprobe_status = KPROBE_HIT_SS;
+ singlestep(p, regs, kcb);
+ if (p->post_handler) {
+ kcb->kprobe_status = KPROBE_HIT_SSDONE;
+ p->post_handler(p, regs, 0);
+ }
+ reset_current_kprobe();
+ }
+ }
+ } else if (cur) {
+ /* We probably hit a jprobe. Call its break handler. */
+ if (cur->break_handler && cur->break_handler(cur, regs)) {
+ kcb->kprobe_status = KPROBE_HIT_SS;
+ singlestep(cur, regs, kcb);
+ if (cur->post_handler) {
+ kcb->kprobe_status = KPROBE_HIT_SSDONE;
+ cur->post_handler(cur, regs, 0);
+ }
+ }
+ reset_current_kprobe();
+ } else {
+ /*
+ * The probe was removed and a race is in progress.
+ * There is nothing we can do about it. Let's restart
+ * the instruction. By the time we can restart, the
+ * real instruction will be there.
+ */
+ }
+}
+
+int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr)
+{
+ kprobe_handler(regs);
+ return 0;
+}
+
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr)
+{
+ struct kprobe *cur = kprobe_running();
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ switch (kcb->kprobe_status) {
+ case KPROBE_HIT_SS:
+ case KPROBE_REENTER:
+ /*
+ * We are here because the instruction being single
+ * stepped caused a page fault. We reset the current
+ * kprobe and the PC to point back to the probe address
+ * and allow the page fault handler to continue as a
+ * normal page fault.
+ */
+ regs->ARM_pc = (long)cur->addr;
+ if (kcb->kprobe_status == KPROBE_REENTER) {
+ restore_previous_kprobe(kcb);
+ } else {
+ reset_current_kprobe();
+ }
+ break;
+
+ case KPROBE_HIT_ACTIVE:
+ case KPROBE_HIT_SSDONE:
+ /*
+ * We increment the nmissed count for accounting,
+ * we can also use npre/npostfault count for accounting
+ * these specific fault cases.
+ */
+ kprobes_inc_nmissed_count(cur);
+
+ /*
+ * We come here because instructions in the pre/post
+ * handler caused the page_fault, this could happen
+ * if handler tries to access user space by
+ * copy_from_user(), get_user() etc. Let the
+ * user-specified handler try to fix it.
+ */
+ if (cur->fault_handler && cur->fault_handler(cur, regs, fsr))
+ return 1;
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data)
+{
+ /*
+ * notify_die() is currently never called on ARM,
+ * so this callback is currently empty.
+ */
+ return NOTIFY_DONE;
+}
+
+/*
+ * When a retprobed function returns, trampoline_handler() is called,
+ * calling the kretprobe's handler. We construct a struct pt_regs to
+ * give a view of registers r0-r11 to the user return-handler. This is
+ * not a complete pt_regs structure, but that should be plenty sufficient
+ * for kretprobe handlers which should normally be interested in r0 only
+ * anyway.
+ */
+static void __attribute__((naked)) __kprobes kretprobe_trampoline(void)
+{
+ __asm__ __volatile__ (
+ "stmdb sp!, {r0 - r11} \n\t"
+ "mov r0, sp \n\t"
+ "bl trampoline_handler \n\t"
+ "mov lr, r0 \n\t"
+ "ldmia sp!, {r0 - r11} \n\t"
+ "mov pc, lr \n\t"
+ : : : "memory");
+}
+
+/* Called from kretprobe_trampoline */
+static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
+{
+ struct kretprobe_instance *ri = NULL;
+ struct hlist_head *head, empty_rp;
+ struct hlist_node *node, *tmp;
+ unsigned long flags, orig_ret_address = 0;
+ unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
+
+ INIT_HLIST_HEAD(&empty_rp);
+ spin_lock_irqsave(&kretprobe_lock, flags);
+ head = kretprobe_inst_table_head(current);
+
+ /*
+ * It is possible to have multiple instances associated with a given
+ * task either because multiple functions in the call path have
+ * a return probe installed on them, and/or more than one return
+ * probe was registered for a target function.
+ *
+ * We can handle this because:
+ * - instances are always inserted at the head of the list
+ * - when multiple return probes are registered for the same
+ * function, the first instance's ret_addr will point to the
+ * real return address, and all the rest will point to
+ * kretprobe_trampoline
+ */
+ hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
+ if (ri->task != current)
+ /* another task is sharing our hash bucket */
+ continue;
+
+ if (ri->rp && ri->rp->handler) {
+ __get_cpu_var(current_kprobe) = &ri->rp->kp;
+ get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
+ ri->rp->handler(ri, regs);
+ __get_cpu_var(current_kprobe) = NULL;
+ }
+
+ orig_ret_address = (unsigned long)ri->ret_addr;
+ recycle_rp_inst(ri, &empty_rp);
+
+ if (orig_ret_address != trampoline_address)
+ /*
+ * This is the real return address. Any other
+ * instances associated with this task are for
+ * other calls deeper on the call stack
+ */
+ break;
+ }
+
+ kretprobe_assert(ri, orig_ret_address, trampoline_address);
+ spin_unlock_irqrestore(&kretprobe_lock, flags);
+
+ hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
+ hlist_del(&ri->hlist);
+ kfree(ri);
+ }
+
+ return (void *)orig_ret_address;
+}
+
+/* Called with kretprobe_lock held. */
+void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
+ struct pt_regs *regs)
+{
+ ri->ret_addr = (kprobe_opcode_t *)regs->ARM_lr;
+
+ /* Replace the return addr with trampoline addr. */
+ regs->ARM_lr = (unsigned long)&kretprobe_trampoline;
+}
+
+int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ struct jprobe *jp = container_of(p, struct jprobe, kp);
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+ long sp_addr = regs->ARM_sp;
+
+ kcb->jprobe_saved_regs = *regs;
+ memcpy(kcb->jprobes_stack, (void *)sp_addr, MIN_STACK_SIZE(sp_addr));
+ regs->ARM_pc = (long)jp->entry;
+ regs->ARM_cpsr |= PSR_I_BIT;
+ preempt_disable();
+ return 1;
+}
+
+void __kprobes jprobe_return(void)
+{
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ __asm__ __volatile__ (
+ /*
+ * Setup an empty pt_regs. Fill SP and PC fields as
+ * they're needed by longjmp_break_handler.
+ */
+ "sub sp, %0, %1 \n\t"
+ "ldr r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t"
+ "str %0, [sp, %2] \n\t"
+ "str r0, [sp, %3] \n\t"
+ "mov r0, sp \n\t"
+ "bl kprobe_handler \n\t"
+
+ /*
+ * Return to the context saved by setjmp_pre_handler
+ * and restored by longjmp_break_handler.
+ */
+ "ldr r0, [sp, %4] \n\t"
+ "msr cpsr_cxsf, r0 \n\t"
+ "ldmia sp, {r0 - pc} \n\t"
+ :
+ : "r" (kcb->jprobe_saved_regs.ARM_sp),
+ "I" (sizeof(struct pt_regs)),
+ "J" (offsetof(struct pt_regs, ARM_sp)),
+ "J" (offsetof(struct pt_regs, ARM_pc)),
+ "J" (offsetof(struct pt_regs, ARM_cpsr))
+ : "memory", "cc");
+}
+
+int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+ long stack_addr = kcb->jprobe_saved_regs.ARM_sp;
+ long orig_sp = regs->ARM_sp;
+ struct jprobe *jp = container_of(p, struct jprobe, kp);
+
+ if (regs->ARM_pc == JPROBE_MAGIC_ADDR) {
+ if (orig_sp != stack_addr) {
+ struct pt_regs *saved_regs =
+ (struct pt_regs *)kcb->jprobe_saved_regs.ARM_sp;
+ printk("current sp %lx does not match saved sp %lx\n",
+ orig_sp, stack_addr);
+ printk("Saved registers for jprobe %p\n", jp);
+ show_regs(saved_regs);
+ printk("Current registers\n");
+ show_regs(regs);
+ BUG();
+ }
+ *regs = kcb->jprobe_saved_regs;
+ memcpy((void *)stack_addr, kcb->jprobes_stack,
+ MIN_STACK_SIZE(stack_addr));
+ preempt_enable_no_resched();
+ return 1;
+ }
+ return 0;
+}
+
+static struct undef_hook kprobes_break_hook = {
+ .instr_mask = 0xffffffff,
+ .instr_val = KPROBE_BREAKPOINT_INSTRUCTION,
+ .cpsr_mask = MODE_MASK,
+ .cpsr_val = SVC_MODE,
+ .fn = kprobe_trap_handler,
+};
+
+int __init arch_init_kprobes()
+{
+ arm_kprobe_decode_init();
+ register_undef_hook(&kprobes_break_hook);
+ return 0;
+}
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index e59b5b8..b5867ec 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -325,7 +325,9 @@
profile_tick(CPU_PROFILING);
do_leds();
do_set_rtc();
+ write_seqlock(&xtime_lock);
do_timer(1);
+ write_sequnlock(&xtime_lock);
#ifndef CONFIG_SMP
update_process_times(user_mode(get_irq_regs()));
#endif
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index c34db4e..5595fdd 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -19,6 +19,7 @@
#include <linux/kallsyms.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/kprobes.h>
#include <asm/atomic.h>
#include <asm/cacheflush.h>
@@ -46,15 +47,6 @@
static void dump_mem(const char *str, unsigned long bottom, unsigned long top);
-static inline int in_exception_text(unsigned long ptr)
-{
- extern char __exception_text_start[];
- extern char __exception_text_end[];
-
- return ptr >= (unsigned long)&__exception_text_start &&
- ptr < (unsigned long)&__exception_text_end;
-}
-
void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
{
#ifdef CONFIG_KALLSYMS
@@ -322,6 +314,17 @@
get_user(instr, (u32 __user *)pc);
}
+#ifdef CONFIG_KPROBES
+ /*
+ * It is possible to have recursive kprobes, so we can't call
+ * the kprobe trap handler with the undef_lock held.
+ */
+ if (instr == KPROBE_BREAKPOINT_INSTRUCTION && !user_mode(regs)) {
+ kprobe_trap_handler(regs, instr);
+ return;
+ }
+#endif
+
spin_lock_irqsave(&undef_lock, flags);
list_for_each_entry(hook, &undef_hook, node) {
if ((instr & hook->instr_mask) == hook->instr_val &&
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 5ff5406..30f732c 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -94,6 +94,7 @@
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
+ KPROBES_TEXT
#ifdef CONFIG_MMU
*(.fixup)
#endif
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index 0446ef2..b016be2 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -130,13 +130,9 @@
aaec2000_timer_interrupt(int irq, void *dev_id)
{
/* TODO: Check timer accuracy */
- write_seqlock(&xtime_lock);
-
timer_tick();
TIMER1_CLEAR = 1;
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 05a9f8a..5b0422c 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -22,6 +22,9 @@
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
+config ARCH_AT91CAP9
+ bool "AT91CAP9"
+
config ARCH_AT91X40
bool "AT91x40"
@@ -178,6 +181,21 @@
# ----------------------------------------------------------
+if ARCH_AT91CAP9
+
+comment "AT91CAP9 Board Type"
+
+config MACH_AT91CAP9ADK
+ bool "Atmel AT91CAP9A-DK Evaluation Kit"
+ depends on ARCH_AT91CAP9
+ help
+ Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
+
+endif
+
+# ----------------------------------------------------------
+
if ARCH_AT91X40
comment "AT91X40 Board Type"
@@ -198,13 +216,13 @@
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
help
Enable support for the DataFlash card.
config MTD_NAND_AT91_BUSWIDTH_16
bool "Enable 16-bit data bus interface to NAND flash"
- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
+ depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
help
On AT91SAM926x boards both types of NAND flash can be present
(8 and 16 bit data bus width).
@@ -219,6 +237,22 @@
Select this if you need to program one or more of the PCK0..PCK3
programmable clock outputs.
+config AT91_TIMER_HZ
+ int "Kernel HZ (jiffies per second)"
+ range 32 1024
+ depends on ARCH_AT91
+ default "128" if ARCH_AT91RM9200
+ default "100"
+ help
+ On AT91rm9200 chips where you're using a system clock derived
+ from the 32768 Hz hardware clock, this tick rate should divide
+ it exactly: use a power-of-two value, such as 128 or 256, to
+ reduce timing errors caused by rounding.
+
+ On AT91sam926x chips, or otherwise when using a higher precision
+ system clock (of at least several MHz), rounding is less of a
+ problem so it can be safer to use a decimal values like 100.
+
endmenu
endif
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index a21f08c..bf5f293 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -8,7 +8,6 @@
obj- :=
obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
-obj-$(CONFIG_PM) += pm.o
# CPU-specific support
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
@@ -16,6 +15,7 @@
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
+obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
@@ -29,7 +29,6 @@
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
-obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
# AT91SAM9260 board-specific support
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
@@ -43,19 +42,17 @@
# AT91SAM9RL board-specific support
obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
-# LEDs support
-led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
-led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
-led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o
-led-$(CONFIG_MACH_CSB337) += leds.o
-led-$(CONFIG_MACH_CSB637) += leds.o
-led-$(CONFIG_MACH_KB9200) += leds.o
-led-$(CONFIG_MACH_KAFA) += leds.o
-obj-$(CONFIG_LEDS) += $(led-y)
+# AT91CAP9 board-specific support
+obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
-# VGA support
-#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
+# AT91X40 board-specific support
+obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
+# Drivers
+obj-y += leds.o
+
+# Power Management
+obj-$(CONFIG_PM) += pm.o
ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index e667dcc..071a250 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -3,7 +3,12 @@
# PARAMS_PHYS must be within 4MB of ZRELADDR
# INITRD_PHYS must be in RAM
+ifeq ($(CONFIG_ARCH_AT91CAP9),y)
+ zreladdr-y := 0x70008000
+params_phys-y := 0x70000100
+initrd_phys-y := 0x70410000
+else
zreladdr-y := 0x20008000
params_phys-y := 0x20000100
initrd_phys-y := 0x20410000
-
+endif
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
new file mode 100644
index 0000000..48d27d8
--- /dev/null
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -0,0 +1,365 @@
+/*
+ * arch/arm/mach-at91/at91cap9.c
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91cap9.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91cap9_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE,
+ .pfn = __phys_to_pfn(AT91CAP9_SRAM_BASE),
+ .length = AT91CAP9_SRAM_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioABCD_clk = {
+ .name = "pioABCD_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_PIOABCD,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb0_clk = {
+ .name = "mpb0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb1_clk = {
+ .name = "mpb1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb2_clk = {
+ .name = "mpb2_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb3_clk = {
+ .name = "mpb3_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb4_clk = {
+ .name = "mpb4_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB4,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+ .name = "mci0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MCI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+ .name = "mci1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MCI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk can_clk = {
+ .name = "can_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_CAN,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+ .name = "twi_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_TWI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+ .name = "ssc0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_SSC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+ .name = "ssc1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_SSC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ac97_clk = {
+ .name = "ac97_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_AC97C,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+ .name = "tcb_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_TCB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwmc_clk = {
+ .name = "pwmc_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_PWMC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+ .name = "macb_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_EMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk aestdes_clk = {
+ .name = "aestdes_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_AESTDES,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk adc_clk = {
+ .name = "adc_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_ADC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+ .name = "isi_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_ISI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+ .name = "lcdc_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_LCDC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma_clk = {
+ .name = "dma_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_DMA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+ .name = "udphs_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_UDPHS,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_UHP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioABCD_clk,
+ &mpb0_clk,
+ &mpb1_clk,
+ &mpb2_clk,
+ &mpb3_clk,
+ &mpb4_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &mmc0_clk,
+ &mmc1_clk,
+ &can_clk,
+ &twi_clk,
+ &spi0_clk,
+ &spi1_clk,
+ &ssc0_clk,
+ &ssc1_clk,
+ &ac97_clk,
+ &tcb_clk,
+ &pwmc_clk,
+ &macb_clk,
+ &aestdes_clk,
+ &adc_clk,
+ &isi_clk,
+ &lcdc_clk,
+ &dma_clk,
+ &udphs_clk,
+ &ohci_clk,
+ // irq0 .. irq1
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+static struct clk pck2 = {
+ .name = "pck2",
+ .pmc_mask = AT91_PMC_PCK2,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 2,
+};
+static struct clk pck3 = {
+ .name = "pck3",
+ .pmc_mask = AT91_PMC_PCK3,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 3,
+};
+
+static void __init at91cap9_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+ clk_register(&pck2);
+ clk_register(&pck3);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91cap9_gpio[] = {
+ {
+ .id = AT91CAP9_ID_PIOABCD,
+ .offset = AT91_PIOA,
+ .clock = &pioABCD_clk,
+ }, {
+ .id = AT91CAP9_ID_PIOABCD,
+ .offset = AT91_PIOB,
+ .clock = &pioABCD_clk,
+ }, {
+ .id = AT91CAP9_ID_PIOABCD,
+ .offset = AT91_PIOC,
+ .clock = &pioABCD_clk,
+ }, {
+ .id = AT91CAP9_ID_PIOABCD,
+ .offset = AT91_PIOD,
+ .clock = &pioABCD_clk,
+ }
+};
+
+static void at91cap9_reset(void)
+{
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+/* --------------------------------------------------------------------
+ * AT91CAP9 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91cap9_initialize(unsigned long main_clock)
+{
+ /* Map peripherals */
+ iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
+
+ at91_arch_reset = at91cap9_reset;
+ at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at91cap9_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91cap9_gpio, 4);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller (FIQ) */
+ 7, /* System Peripherals */
+ 1, /* Parallel IO Controller A, B, C and D */
+ 0, /* MP Block Peripheral 0 */
+ 0, /* MP Block Peripheral 1 */
+ 0, /* MP Block Peripheral 2 */
+ 0, /* MP Block Peripheral 3 */
+ 0, /* MP Block Peripheral 4 */
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
+ 0, /* Multimedia Card Interface 0 */
+ 0, /* Multimedia Card Interface 1 */
+ 3, /* CAN */
+ 6, /* Two-Wire Interface */
+ 5, /* Serial Peripheral Interface 0 */
+ 5, /* Serial Peripheral Interface 1 */
+ 4, /* Serial Synchronous Controller 0 */
+ 4, /* Serial Synchronous Controller 1 */
+ 5, /* AC97 Controller */
+ 0, /* Timer Counter 0, 1 and 2 */
+ 0, /* Pulse Width Modulation Controller */
+ 3, /* Ethernet */
+ 0, /* Advanced Encryption Standard, Triple DES*/
+ 0, /* Analog-to-Digital Converter */
+ 0, /* Image Sensor Interface */
+ 3, /* LCD Controller */
+ 0, /* DMA Controller */
+ 2, /* USB Device Port */
+ 2, /* USB Host port */
+ 0, /* Advanced Interrupt Controller (IRQ0) */
+ 0, /* Advanced Interrupt Controller (IRQ1) */
+};
+
+void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at91cap9_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
new file mode 100644
index 0000000..c50fad9
--- /dev/null
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -0,0 +1,1066 @@
+/*
+ * arch/arm/mach-at91/at91cap9_devices.c
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91cap9.h>
+#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91cap9_matrix.h>
+
+#include "generic.h"
+
+
+/* --------------------------------------------------------------------
+ * USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+ [0] = {
+ .start = AT91CAP9_UHP_BASE,
+ .end = AT91CAP9_UHP_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_UHP,
+ .end = AT91CAP9_ID_UHP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_usbh_device = {
+ .name = "at91_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usbh_data,
+ },
+ .resource = usbh_resources,
+ .num_resources = ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+ int i;
+
+ if (!data)
+ return;
+
+ /* Enable VBus control for UHP ports */
+ for (i = 0; i < data->ports; i++) {
+ if (data->vbus_pin[i])
+ at91_set_gpio_output(data->vbus_pin[i], 0);
+ }
+
+ usbh_data = *data;
+ platform_device_register(&at91_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = DMA_BIT_MASK(32);
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_EMAC,
+ .end = AT91CAP9_BASE_EMAC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_EMAC,
+ .end = AT91CAP9_ID_EMAC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_eth_device = {
+ .name = "macb",
+ .id = -1,
+ .dev = {
+ .dma_mask = ð_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = ð_data,
+ },
+ .resource = eth_resources,
+ .num_resources = ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->phy_irq_pin) {
+ at91_set_gpio_input(data->phy_irq_pin, 0);
+ at91_set_deglitch(data->phy_irq_pin, 1);
+ }
+
+ /* Pins used for MII and RMII */
+ at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */
+ at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */
+
+ if (!data->is_rmii) {
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
+ }
+
+ eth_data = *data;
+ platform_device_register(&at91cap9_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
+static struct at91_mmc_data mmc0_data, mmc1_data;
+
+static struct resource mmc0_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_MCI0,
+ .end = AT91CAP9_BASE_MCI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_MCI0,
+ .end = AT91CAP9_ID_MCI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_mmc0_device = {
+ .name = "at91_mci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &mmc0_data,
+ },
+ .resource = mmc0_resources,
+ .num_resources = ARRAY_SIZE(mmc0_resources),
+};
+
+static struct resource mmc1_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_MCI1,
+ .end = AT91CAP9_BASE_MCI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_MCI1,
+ .end = AT91CAP9_ID_MCI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_mmc1_device = {
+ .name = "at91_mci",
+ .id = 1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &mmc1_data,
+ },
+ .resource = mmc1_resources,
+ .num_resources = ARRAY_SIZE(mmc1_resources),
+};
+
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+{
+ if (!data)
+ return;
+
+ /* input/irq */
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+ if (data->wp_pin)
+ at91_set_gpio_input(data->wp_pin, 1);
+ if (data->vcc_pin)
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ if (mmc_id == 0) { /* MCI0 */
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA2, 0);
+
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA1, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA0, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA3, 1);
+ at91_set_A_periph(AT91_PIN_PA4, 1);
+ at91_set_A_periph(AT91_PIN_PA5, 1);
+ }
+
+ mmc0_data = *data;
+ at91_clock_associate("mci0_clk", &at91cap9_mmc1_device.dev, "mci_clk");
+ platform_device_register(&at91cap9_mmc0_device);
+ } else { /* MCI1 */
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA16, 0);
+
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA17, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA18, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA19, 1);
+ at91_set_A_periph(AT91_PIN_PA20, 1);
+ at91_set_A_periph(AT91_PIN_PA21, 1);
+ }
+
+ mmc1_data = *data;
+ at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk");
+ platform_device_register(&at91cap9_mmc1_device);
+ }
+}
+#else
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91cap9_nand_device = {
+ .name = "at91_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+ unsigned long csa, mode;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1)
+ | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
+
+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6)
+ | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
+
+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
+
+ if (data->bus_width_16)
+ mode = AT91_SMC_DBW_16;
+ else
+ mode = AT91_SMC_DBW_8;
+ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ nand_data = *data;
+ platform_device_register(&at91cap9_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+ .sda_pin = AT91_PIN_PB4,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PB5,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91cap9_twi_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at91cap9_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_TWI,
+ .end = AT91CAP9_BASE_TWI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_TWI,
+ .end = AT91CAP9_ID_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_twi_device = {
+ .name = "at91_i2c",
+ .id = -1,
+ .resource = twi_resources,
+ .num_resources = ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ /* pins used for TWI interface */
+ at91_set_B_periph(AT91_PIN_PB4, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+ at91_set_B_periph(AT91_PIN_PB5, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at91cap9_twi_device);
+}
+#else
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+static struct resource spi0_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_SPI0,
+ .end = AT91CAP9_BASE_SPI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_SPI0,
+ .end = AT91CAP9_ID_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_spi0_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 };
+
+static struct resource spi1_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_SPI1,
+ .end = AT91CAP9_BASE_SPI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_SPI1,
+ .end = AT91CAP9_ID_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_spi1_device = {
+ .name = "atmel_spi",
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+ short enable_spi0 = 0;
+ short enable_spi1 = 0;
+
+ /* Choose SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else if (devices[i].bus_num == 0)
+ cs_pin = spi0_standard_cs[devices[i].chip_select];
+ else
+ cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+ if (devices[i].bus_num == 0)
+ enable_spi0 = 1;
+ else
+ enable_spi1 = 1;
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+
+ /* Configure SPI bus(es) */
+ if (enable_spi0) {
+ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk");
+ platform_device_register(&at91cap9_spi0_device);
+ }
+ if (enable_spi1) {
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk");
+ platform_device_register(&at91cap9_spi1_device);
+ }
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTT
+ * -------------------------------------------------------------------- */
+
+static struct platform_device at91cap9_rtt_device = {
+ .name = "at91_rtt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_rtt(void)
+{
+ platform_device_register(&at91cap9_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91cap9_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91cap9_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * AC97
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
+static struct atmel_ac97_data ac97_data;
+
+static struct resource ac97_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_AC97C,
+ .end = AT91CAP9_BASE_AC97C + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_AC97C,
+ .end = AT91CAP9_ID_AC97C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_ac97_device = {
+ .name = "ac97c",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ac97_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &ac97_data,
+ },
+ .resource = ac97_resources,
+ .num_resources = ARRAY_SIZE(ac97_resources),
+};
+
+void __init at91_add_device_ac97(struct atmel_ac97_data *data)
+{
+ if (!data)
+ return;
+
+ at91_set_A_periph(AT91_PIN_PA6, 0); /* AC97FS */
+ at91_set_A_periph(AT91_PIN_PA7, 0); /* AC97CK */
+ at91_set_A_periph(AT91_PIN_PA8, 0); /* AC97TX */
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */
+
+ /* reset */
+ if (data->reset_pin)
+ at91_set_gpio_output(data->reset_pin, 0);
+
+ ac97_data = *data;
+ platform_device_register(&at91cap9_ac97_device);
+}
+#else
+void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
+static struct atmel_lcdfb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+ [0] = {
+ .start = AT91CAP9_LCDC_BASE,
+ .end = AT91CAP9_LCDC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_LCDC,
+ .end = AT91CAP9_ID_LCDC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_lcdc_device = {
+ .name = "atmel_lcdfb",
+ .id = 0,
+ .dev = {
+ .dma_mask = &lcdc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &lcdc_data,
+ },
+ .resource = lcdc_resources,
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+{
+ if (!data)
+ return;
+
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
+ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
+ at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
+ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
+ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
+ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
+ at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */
+ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
+ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
+
+ lcdc_data = *data;
+ platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_SSC0,
+ .end = AT91CAP9_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_SSC0,
+ .end = AT91CAP9_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB0, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB1, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB2, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB3, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB4, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB5, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_SSC1,
+ .end = AT91CAP9_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_SSC1,
+ .end = AT91CAP9_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB6, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB7, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB8, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB9, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB10, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB11, 1);
+}
+
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91CAP9_ID_SSC0:
+ pdev = &at91cap9_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
+ break;
+ case AT91CAP9_ID_SSC1:
+ pdev = &at91cap9_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
+ break;
+ default:
+ return;
+ }
+
+ platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_US0,
+ .end = AT91CAP9_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_US0,
+ .end = AT91CAP9_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA24, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA25, 0); /* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_US1,
+ .end = AT91CAP9_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_US1,
+ .end = AT91CAP9_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_US2,
+ .end = AT91CAP9_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_US2,
+ .end = AT91CAP9_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
+}
+
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91cap9_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91CAP9_ID_US0:
+ pdev = &at91cap9_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91CAP9_ID_US1:
+ pdev = &at91cap9_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91CAP9_ID_US2:
+ pdev = &at91cap9_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+}
+#else
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 2cad2bf..d688c1d 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -301,28 +301,28 @@
static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller (FIQ) */
7, /* System Peripherals */
- 0, /* Parallel IO Controller A */
- 0, /* Parallel IO Controller B */
- 0, /* Parallel IO Controller C */
- 0, /* Parallel IO Controller D */
- 6, /* USART 0 */
- 6, /* USART 1 */
- 6, /* USART 2 */
- 6, /* USART 3 */
+ 1, /* Parallel IO Controller A */
+ 1, /* Parallel IO Controller B */
+ 1, /* Parallel IO Controller C */
+ 1, /* Parallel IO Controller D */
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
+ 5, /* USART 3 */
0, /* Multimedia Card Interface */
- 4, /* USB Device Port */
- 0, /* Two-Wire Interface */
- 6, /* Serial Peripheral Interface */
- 5, /* Serial Synchronous Controller 0 */
- 5, /* Serial Synchronous Controller 1 */
- 5, /* Serial Synchronous Controller 2 */
+ 2, /* USB Device Port */
+ 6, /* Two-Wire Interface */
+ 5, /* Serial Peripheral Interface */
+ 4, /* Serial Synchronous Controller 0 */
+ 4, /* Serial Synchronous Controller 1 */
+ 4, /* Serial Synchronous Controller 2 */
0, /* Timer Counter 0 */
0, /* Timer Counter 1 */
0, /* Timer Counter 2 */
0, /* Timer Counter 3 */
0, /* Timer Counter 4 */
0, /* Timer Counter 5 */
- 3, /* USB Host port */
+ 2, /* USB Host port */
3, /* Ethernet MAC */
0, /* Advanced Interrupt Controller (IRQ0) */
0, /* Advanced Interrupt Controller (IRQ1) */
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 9296833..ef6aeb8 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -13,6 +13,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -29,7 +30,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = 0xffffffffUL;
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
static struct at91_usbh_data usbh_data;
static struct resource usbh_resources[] = {
@@ -50,7 +51,7 @@
.id = -1,
.dev = {
.dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &usbh_data,
},
.resource = usbh_resources,
@@ -125,7 +126,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
-static u64 eth_dmamask = 0xffffffffUL;
+static u64 eth_dmamask = DMA_BIT_MASK(32);
static struct at91_eth_data eth_data;
static struct resource eth_resources[] = {
@@ -146,7 +147,7 @@
.id = -1,
.dev = {
.dma_mask = ð_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = ð_data,
},
.resource = eth_resources,
@@ -285,7 +286,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc_data;
static struct resource mmc_resources[] = {
@@ -306,7 +307,7 @@
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc_data,
},
.resource = mmc_resources,
@@ -375,7 +376,7 @@
static struct resource nand_resources[] = {
{
.start = NAND_BASE,
- .end = NAND_BASE + SZ_8M - 1,
+ .end = NAND_BASE + SZ_256M - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -513,7 +514,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
+static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi_resources[] = {
[0] = {
@@ -533,7 +534,7 @@
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi_resources,
.num_resources = ARRAY_SIZE(spi_resources),
@@ -557,8 +558,11 @@
else
cs_pin = spi_standard_cs[devices[i].chip_select];
- /* enable chip-select pin */
- at91_set_gpio_output(cs_pin, 1);
+ if (devices[i].chip_select == 0) /* for CS0 errata */
+ at91_set_A_periph(cs_pin, 0);
+ else
+ at91_set_gpio_output(cs_pin, 1);
+
/* pass chip-select pin to driver */
devices[i].controller_data = (void *) cs_pin;
@@ -613,24 +617,175 @@
/* --------------------------------------------------------------------
- * LEDs
+ * SSC -- Synchronous Serial Controller
* -------------------------------------------------------------------- */
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_SSC0,
+ .end = AT91RM9200_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_SSC0,
+ .end = AT91RM9200_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91rm9200_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
{
- /* Enable GPIO to access the LEDs */
- at91_set_gpio_output(cpu_led, 1);
- at91_set_gpio_output(timer_led, 1);
-
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB0, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB1, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB2, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB3, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB4, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB5, 1);
}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_SSC1,
+ .end = AT91RM9200_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_SSC1,
+ .end = AT91RM9200_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91rm9200_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB6, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB7, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB8, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB9, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB10, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB11, 1);
+}
+
+static u64 ssc2_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc2_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_SSC2,
+ .end = AT91RM9200_BASE_SSC2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_SSC2,
+ .end = AT91RM9200_ID_SSC2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91rm9200_ssc2_device = {
+ .name = "ssc",
+ .id = 2,
+ .dev = {
+ .dma_mask = &ssc2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc2_resources,
+ .num_resources = ARRAY_SIZE(ssc2_resources),
+};
+
+static inline void configure_ssc2_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB12, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB13, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB14, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB15, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB16, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB17, 1);
+}
+
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91RM9200_ID_SSC0:
+ pdev = &at91rm9200_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
+ break;
+ case AT91RM9200_ID_SSC1:
+ pdev = &at91rm9200_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
+ break;
+ case AT91RM9200_ID_SSC2:
+ pdev = &at91rm9200_ssc2_device;
+ configure_ssc2_pins(pins);
+ at91_clock_associate("ssc2_clk", &pdev->dev, "ssc");
+ break;
+ default:
+ return;
+ }
+
+ platform_device_register(pdev);
+}
+
#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#endif
@@ -658,12 +813,15 @@
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91rm9200_dbgu_device = {
.name = "atmel_usart",
.id = 0,
.dev = {
- .platform_data = &dbgu_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
},
.resource = dbgu_resources,
.num_resources = ARRAY_SIZE(dbgu_resources),
@@ -693,28 +851,35 @@
.use_dma_rx = 1,
};
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91rm9200_uart0_device = {
.name = "atmel_usart",
.id = 1,
.dev = {
- .platform_data = &uart0_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
},
.resource = uart0_resources,
.num_resources = ARRAY_SIZE(uart0_resources),
};
-static inline void configure_usart0_pins(void)
+static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PA18, 0); /* RXD0 */
- at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */
- /*
- * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
- * We need to drive the pin manually. Default is off (RTS is active low).
- */
- at91_set_gpio_output(AT91_PIN_PA21, 1);
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */
+
+ if (pins & ATMEL_UART_RTS) {
+ /*
+ * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
+ * We need to drive the pin manually. Default is off (RTS is active low).
+ */
+ at91_set_gpio_output(AT91_PIN_PA21, 1);
+ }
}
static struct resource uart1_resources[] = {
@@ -735,27 +900,37 @@
.use_dma_rx = 1,
};
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91rm9200_uart1_device = {
.name = "atmel_usart",
.id = 2,
.dev = {
- .platform_data = &uart1_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
},
.resource = uart1_resources,
.num_resources = ARRAY_SIZE(uart1_resources),
};
-static inline void configure_usart1_pins(void)
+static inline void configure_usart1_pins(unsigned pins)
{
- at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */
- at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */
at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PB21, 0); /* RXD1 */
- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */
- at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */
- at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */
- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */
+
+ if (pins & ATMEL_UART_RI)
+ at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */
+ if (pins & ATMEL_UART_DTR)
+ at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */
+ if (pins & ATMEL_UART_DCD)
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */
+ if (pins & ATMEL_UART_DSR)
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */
}
static struct resource uart2_resources[] = {
@@ -776,21 +951,29 @@
.use_dma_rx = 1,
};
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91rm9200_uart2_device = {
.name = "atmel_usart",
.id = 3,
.dev = {
- .platform_data = &uart2_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
},
.resource = uart2_resources,
.num_resources = ARRAY_SIZE(uart2_resources),
};
-static inline void configure_usart2_pins(void)
+static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */
at91_set_A_periph(AT91_PIN_PA23, 1); /* TXD2 */
+
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PA30, 0); /* CTS2 */
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PA31, 0); /* RTS2 */
}
static struct resource uart3_resources[] = {
@@ -811,27 +994,35 @@
.use_dma_rx = 1,
};
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91rm9200_uart3_device = {
.name = "atmel_usart",
.id = 4,
.dev = {
- .platform_data = &uart3_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart3_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart3_data,
},
.resource = uart3_resources,
.num_resources = ARRAY_SIZE(uart3_resources),
};
-static inline void configure_usart3_pins(void)
+static inline void configure_usart3_pins(unsigned pins)
{
at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */
at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */
+
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */
}
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
-void __init at91_init_serial(struct at91_uart_config *config)
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
{
int i;
@@ -839,22 +1030,22 @@
for (i = 0; i < config->nr_tty; i++) {
switch (config->tty_map[i]) {
case 0:
- configure_usart0_pins();
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91rm9200_uart0_device;
at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
break;
case 1:
- configure_usart1_pins();
+ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
at91_uarts[i] = &at91rm9200_uart1_device;
at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
break;
case 2:
- configure_usart2_pins();
+ configure_usart2_pins(0);
at91_uarts[i] = &at91rm9200_uart2_device;
at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
break;
case 3:
- configure_usart3_pins();
+ configure_usart3_pins(0);
at91_uarts[i] = &at91rm9200_uart3_device;
at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
break;
@@ -876,6 +1067,53 @@
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91rm9200_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91RM9200_ID_US0:
+ pdev = &at91rm9200_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91RM9200_ID_US1:
+ pdev = &at91rm9200_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91RM9200_ID_US2:
+ pdev = &at91rm9200_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ case AT91RM9200_ID_US3:
+ pdev = &at91rm9200_uart3_device;
+ configure_usart3_pins(pins);
+ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
void __init at91_add_device_serial(void)
{
int i;
@@ -886,7 +1124,9 @@
}
}
#else
-void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index e47381e..18d0661 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -327,30 +327,30 @@
static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller */
7, /* System Peripherals */
- 0, /* Parallel IO Controller A */
- 0, /* Parallel IO Controller B */
- 0, /* Parallel IO Controller C */
+ 1, /* Parallel IO Controller A */
+ 1, /* Parallel IO Controller B */
+ 1, /* Parallel IO Controller C */
0, /* Analog-to-Digital Converter */
- 6, /* USART 0 */
- 6, /* USART 1 */
- 6, /* USART 2 */
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
0, /* Multimedia Card Interface */
- 4, /* USB Device Port */
- 0, /* Two-Wire Interface */
- 6, /* Serial Peripheral Interface 0 */
- 6, /* Serial Peripheral Interface 1 */
+ 2, /* USB Device Port */
+ 6, /* Two-Wire Interface */
+ 5, /* Serial Peripheral Interface 0 */
+ 5, /* Serial Peripheral Interface 1 */
5, /* Serial Synchronous Controller */
0,
0,
0, /* Timer Counter 0 */
0, /* Timer Counter 1 */
0, /* Timer Counter 2 */
- 3, /* USB Host port */
+ 2, /* USB Host port */
3, /* Ethernet */
0, /* Image Sensor Interface */
- 6, /* USART 3 */
- 6, /* USART 4 */
- 6, /* USART 5 */
+ 5, /* USART 3 */
+ 5, /* USART 4 */
+ 5, /* USART 5 */
0, /* Timer Counter 3 */
0, /* Timer Counter 4 */
0, /* Timer Counter 5 */
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 3091bf4..105f840 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -12,6 +12,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -29,7 +30,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = 0xffffffffUL;
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
static struct at91_usbh_data usbh_data;
static struct resource usbh_resources[] = {
@@ -50,7 +51,7 @@
.id = -1,
.dev = {
.dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &usbh_data,
},
.resource = usbh_resources,
@@ -125,7 +126,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = 0xffffffffUL;
+static u64 eth_dmamask = DMA_BIT_MASK(32);
static struct at91_eth_data eth_data;
static struct resource eth_resources[] = {
@@ -146,7 +147,7 @@
.id = -1,
.dev = {
.dma_mask = ð_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = ð_data,
},
.resource = eth_resources,
@@ -199,7 +200,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc_data;
static struct resource mmc_resources[] = {
@@ -220,7 +221,7 @@
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc_data,
},
.resource = mmc_resources,
@@ -289,7 +290,7 @@
static struct resource nand_resources[] = {
{
.start = NAND_BASE,
- .end = NAND_BASE + SZ_8M - 1,
+ .end = NAND_BASE + SZ_256M - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -312,7 +313,7 @@
return;
csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* set the bus interface characteristics */
at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
@@ -431,7 +432,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
+static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi0_resources[] = {
[0] = {
@@ -451,7 +452,7 @@
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi0_resources,
.num_resources = ARRAY_SIZE(spi0_resources),
@@ -477,7 +478,7 @@
.id = 1,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi1_resources,
.num_resources = ARRAY_SIZE(spi1_resources),
@@ -539,24 +540,126 @@
/* --------------------------------------------------------------------
- * LEDs
+ * RTT
* -------------------------------------------------------------------- */
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
+static struct resource rtt_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT,
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+static struct platform_device at91sam9260_rtt_device = {
+ .name = "at91_rtt",
+ .id = -1,
+ .resource = rtt_resources,
+ .num_resources = ARRAY_SIZE(rtt_resources),
+};
+
+static void __init at91_add_device_rtt(void)
{
- /* Enable GPIO to access the LEDs */
- at91_set_gpio_output(cpu_led, 1);
- at91_set_gpio_output(timer_led, 1);
+ platform_device_register(&at91sam9260_rtt_device);
+}
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91sam9260_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91sam9260_wdt_device);
}
#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_SSC,
+ .end = AT91SAM9260_BASE_SSC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_SSC,
+ .end = AT91SAM9260_ID_SSC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9260_ssc_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc_resources,
+ .num_resources = ARRAY_SIZE(ssc_resources),
+};
+
+static inline void configure_ssc_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB17, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB16, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB18, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB19, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB20, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB21, 1);
+}
+
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91SAM9260_ID_SSC:
+ pdev = &at91sam9260_ssc_device;
+ configure_ssc_pins(pins);
+ at91_clock_associate("ssc_clk", &pdev->dev, "pclk");
+ break;
+ default:
+ return;
+ }
+
+ platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#endif
@@ -583,12 +686,15 @@
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_dbgu_device = {
.name = "atmel_usart",
.id = 0,
.dev = {
- .platform_data = &dbgu_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
},
.resource = dbgu_resources,
.num_resources = ARRAY_SIZE(dbgu_resources),
@@ -618,27 +724,37 @@
.use_dma_rx = 1,
};
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_uart0_device = {
.name = "atmel_usart",
.id = 1,
.dev = {
- .platform_data = &uart0_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
},
.resource = uart0_resources,
.num_resources = ARRAY_SIZE(uart0_resources),
};
-static inline void configure_usart0_pins(void)
+static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
- at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
- at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
- at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
- at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
+ if (pins & ATMEL_UART_DTR)
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
+ if (pins & ATMEL_UART_DSR)
+ at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
+ if (pins & ATMEL_UART_DCD)
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
+ if (pins & ATMEL_UART_RI)
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
}
static struct resource uart1_resources[] = {
@@ -659,23 +775,29 @@
.use_dma_rx = 1,
};
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_uart1_device = {
.name = "atmel_usart",
.id = 2,
.dev = {
- .platform_data = &uart1_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
},
.resource = uart1_resources,
.num_resources = ARRAY_SIZE(uart1_resources),
};
-static inline void configure_usart1_pins(void)
+static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
- at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
- at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
}
static struct resource uart2_resources[] = {
@@ -696,21 +818,29 @@
.use_dma_rx = 1,
};
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_uart2_device = {
.name = "atmel_usart",
.id = 3,
.dev = {
- .platform_data = &uart2_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
},
.resource = uart2_resources,
.num_resources = ARRAY_SIZE(uart2_resources),
};
-static inline void configure_usart2_pins(void)
+static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA4, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */
}
static struct resource uart3_resources[] = {
@@ -731,21 +861,29 @@
.use_dma_rx = 1,
};
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_uart3_device = {
.name = "atmel_usart",
.id = 4,
.dev = {
- .platform_data = &uart3_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart3_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart3_data,
},
.resource = uart3_resources,
.num_resources = ARRAY_SIZE(uart3_resources),
};
-static inline void configure_usart3_pins(void)
+static inline void configure_usart3_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */
at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PC8, 0); /* RTS3 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */
}
static struct resource uart4_resources[] = {
@@ -766,12 +904,15 @@
.use_dma_rx = 1,
};
+static u64 uart4_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_uart4_device = {
.name = "atmel_usart",
.id = 5,
.dev = {
- .platform_data = &uart4_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart4_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart4_data,
},
.resource = uart4_resources,
.num_resources = ARRAY_SIZE(uart4_resources),
@@ -801,12 +942,15 @@
.use_dma_rx = 1,
};
+static u64 uart5_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_uart5_device = {
.name = "atmel_usart",
.id = 6,
.dev = {
- .platform_data = &uart5_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart5_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart5_data,
},
.resource = uart5_resources,
.num_resources = ARRAY_SIZE(uart5_resources),
@@ -818,10 +962,10 @@
at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */
}
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
-void __init at91_init_serial(struct at91_uart_config *config)
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
{
int i;
@@ -829,22 +973,22 @@
for (i = 0; i < config->nr_tty; i++) {
switch (config->tty_map[i]) {
case 0:
- configure_usart0_pins();
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
at91_uarts[i] = &at91sam9260_uart0_device;
at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart");
break;
case 1:
- configure_usart1_pins();
+ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91sam9260_uart1_device;
at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart");
break;
case 2:
- configure_usart2_pins();
+ configure_usart2_pins(0);
at91_uarts[i] = &at91sam9260_uart2_device;
at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart");
break;
case 3:
- configure_usart3_pins();
+ configure_usart3_pins(0);
at91_uarts[i] = &at91sam9260_uart3_device;
at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart");
break;
@@ -876,6 +1020,63 @@
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91sam9260_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91SAM9260_ID_US0:
+ pdev = &at91sam9260_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9260_ID_US1:
+ pdev = &at91sam9260_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9260_ID_US2:
+ pdev = &at91sam9260_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9260_ID_US3:
+ pdev = &at91sam9260_uart3_device;
+ configure_usart3_pins(pins);
+ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9260_ID_US4:
+ pdev = &at91sam9260_uart4_device;
+ configure_usart4_pins();
+ at91_clock_associate("usart4_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9260_ID_US5:
+ pdev = &at91sam9260_uart5_device;
+ configure_usart5_pins();
+ at91_clock_associate("usart5_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
void __init at91_add_device_serial(void)
{
int i;
@@ -886,7 +1087,9 @@
}
}
#else
-void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
@@ -898,6 +1101,8 @@
*/
static int __init at91_add_standard_devices(void)
{
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
return 0;
}
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index dfe8c39..90b87e1 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -279,25 +279,25 @@
static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller */
7, /* System Peripherals */
- 0, /* Parallel IO Controller A */
- 0, /* Parallel IO Controller B */
- 0, /* Parallel IO Controller C */
+ 1, /* Parallel IO Controller A */
+ 1, /* Parallel IO Controller B */
+ 1, /* Parallel IO Controller C */
0,
- 6, /* USART 0 */
- 6, /* USART 1 */
- 6, /* USART 2 */
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
0, /* Multimedia Card Interface */
- 4, /* USB Device Port */
- 0, /* Two-Wire Interface */
- 6, /* Serial Peripheral Interface 0 */
- 6, /* Serial Peripheral Interface 1 */
- 5, /* Serial Synchronous Controller 0 */
- 5, /* Serial Synchronous Controller 1 */
- 5, /* Serial Synchronous Controller 2 */
+ 2, /* USB Device Port */
+ 6, /* Two-Wire Interface */
+ 5, /* Serial Peripheral Interface 0 */
+ 5, /* Serial Peripheral Interface 1 */
+ 4, /* Serial Synchronous Controller 0 */
+ 4, /* Serial Synchronous Controller 1 */
+ 4, /* Serial Synchronous Controller 2 */
0, /* Timer Counter 0 */
0, /* Timer Counter 1 */
0, /* Timer Counter 2 */
- 3, /* USB Host port */
+ 2, /* USB Host port */
3, /* LCD Controller */
0,
0,
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 64979a9..2456412 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -13,6 +13,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -33,7 +34,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = 0xffffffffUL;
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
static struct at91_usbh_data usbh_data;
static struct resource usbh_resources[] = {
@@ -54,7 +55,7 @@
.id = -1,
.dev = {
.dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &usbh_data,
},
.resource = usbh_resources,
@@ -106,8 +107,6 @@
void __init at91_add_device_udc(struct at91_udc_data *data)
{
- unsigned long x;
-
if (!data)
return;
@@ -116,9 +115,7 @@
at91_set_deglitch(data->vbus_pin, 1);
}
- /* Pullup pin is handled internally */
- x = at91_sys_read(AT91_MATRIX_USBPUCR);
- at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON);
+ /* Pullup pin is handled internally by USB device peripheral */
udc_data = *data;
platform_device_register(&at91sam9261_udc_device);
@@ -132,7 +129,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc_data;
static struct resource mmc_resources[] = {
@@ -153,7 +150,7 @@
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc_data,
},
.resource = mmc_resources,
@@ -232,7 +229,7 @@
return;
csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* set the bus interface characteristics */
at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
@@ -354,7 +351,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
+static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi0_resources[] = {
[0] = {
@@ -374,7 +371,7 @@
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi0_resources,
.num_resources = ARRAY_SIZE(spi0_resources),
@@ -400,7 +397,7 @@
.id = 1,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi1_resources,
.num_resources = ARRAY_SIZE(spi1_resources),
@@ -466,7 +463,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = 0xffffffffUL;
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
static struct atmel_lcdfb_info lcdc_data;
static struct resource lcdc_resources[] = {
@@ -494,7 +491,7 @@
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &lcdc_data,
},
.resource = lcdc_resources,
@@ -507,6 +504,17 @@
return;
}
+#if defined(CONFIG_FB_ATMEL_STN)
+ at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
+ at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* LCDD0 */
+ at91_set_A_periph(AT91_PIN_PB6, 0); /* LCDD1 */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
+#else
at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
@@ -529,6 +537,7 @@
at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */
at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
+#endif
lcdc_data = *data;
platform_device_register(&at91_lcdc_device);
@@ -539,24 +548,220 @@
/* --------------------------------------------------------------------
- * LEDs
+ * RTT
* -------------------------------------------------------------------- */
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
+static struct resource rtt_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT,
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+static struct platform_device at91sam9261_rtt_device = {
+ .name = "at91_rtt",
+ .id = -1,
+ .resource = rtt_resources,
+ .num_resources = ARRAY_SIZE(rtt_resources),
+};
+
+static void __init at91_add_device_rtt(void)
{
- /* Enable GPIO to access the LEDs */
- at91_set_gpio_output(cpu_led, 1);
- at91_set_gpio_output(timer_led, 1);
+ platform_device_register(&at91sam9261_rtt_device);
+}
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91sam9261_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91sam9261_wdt_device);
}
#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_SSC0,
+ .end = AT91SAM9261_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_SSC0,
+ .end = AT91SAM9261_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB21, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB22, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB23, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB24, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB25, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB26, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_SSC1,
+ .end = AT91SAM9261_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_SSC1,
+ .end = AT91SAM9261_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_B_periph(AT91_PIN_PA17, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_B_periph(AT91_PIN_PA18, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_B_periph(AT91_PIN_PA19, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_B_periph(AT91_PIN_PA20, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_B_periph(AT91_PIN_PA21, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_B_periph(AT91_PIN_PA22, 1);
+}
+
+static u64 ssc2_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc2_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_SSC2,
+ .end = AT91SAM9261_BASE_SSC2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_SSC2,
+ .end = AT91SAM9261_ID_SSC2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_ssc2_device = {
+ .name = "ssc",
+ .id = 2,
+ .dev = {
+ .dma_mask = &ssc2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc2_resources,
+ .num_resources = ARRAY_SIZE(ssc2_resources),
+};
+
+static inline void configure_ssc2_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_B_periph(AT91_PIN_PC25, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_B_periph(AT91_PIN_PC26, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_B_periph(AT91_PIN_PC27, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_B_periph(AT91_PIN_PC28, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_B_periph(AT91_PIN_PC29, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_B_periph(AT91_PIN_PC30, 1);
+}
+
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91SAM9261_ID_SSC0:
+ pdev = &at91sam9261_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
+ break;
+ case AT91SAM9261_ID_SSC1:
+ pdev = &at91sam9261_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
+ break;
+ case AT91SAM9261_ID_SSC2:
+ pdev = &at91sam9261_ssc2_device;
+ configure_ssc2_pins(pins);
+ at91_clock_associate("ssc2_clk", &pdev->dev, "pclk");
+ break;
+ default:
+ return;
+ }
+
+ platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#endif
@@ -584,12 +789,15 @@
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9261_dbgu_device = {
.name = "atmel_usart",
.id = 0,
.dev = {
- .platform_data = &dbgu_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
},
.resource = dbgu_resources,
.num_resources = ARRAY_SIZE(dbgu_resources),
@@ -619,23 +827,29 @@
.use_dma_rx = 1,
};
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9261_uart0_device = {
.name = "atmel_usart",
.id = 1,
.dev = {
- .platform_data = &uart0_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
},
.resource = uart0_resources,
.num_resources = ARRAY_SIZE(uart0_resources),
};
-static inline void configure_usart0_pins(void)
+static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
- at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */
- at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */
}
static struct resource uart1_resources[] = {
@@ -656,21 +870,29 @@
.use_dma_rx = 1,
};
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9261_uart1_device = {
.name = "atmel_usart",
.id = 2,
.dev = {
- .platform_data = &uart1_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
},
.resource = uart1_resources,
.num_resources = ARRAY_SIZE(uart1_resources),
};
-static inline void configure_usart1_pins(void)
+static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PA12, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PA13, 0); /* CTS1 */
}
static struct resource uart2_resources[] = {
@@ -691,27 +913,35 @@
.use_dma_rx = 1,
};
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9261_uart2_device = {
.name = "atmel_usart",
.id = 3,
.dev = {
- .platform_data = &uart2_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
},
.resource = uart2_resources,
.num_resources = ARRAY_SIZE(uart2_resources),
};
-static inline void configure_usart2_pins(void)
+static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PA15, 0); /* RTS2*/
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */
}
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
-void __init at91_init_serial(struct at91_uart_config *config)
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
{
int i;
@@ -719,17 +949,17 @@
for (i = 0; i < config->nr_tty; i++) {
switch (config->tty_map[i]) {
case 0:
- configure_usart0_pins();
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91sam9261_uart0_device;
at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart");
break;
case 1:
- configure_usart1_pins();
+ configure_usart1_pins(0);
at91_uarts[i] = &at91sam9261_uart1_device;
at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart");
break;
case 2:
- configure_usart2_pins();
+ configure_usart2_pins(0);
at91_uarts[i] = &at91sam9261_uart2_device;
at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart");
break;
@@ -751,6 +981,48 @@
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91sam9261_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91SAM9261_ID_US0:
+ pdev = &at91sam9261_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9261_ID_US1:
+ pdev = &at91sam9261_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9261_ID_US2:
+ pdev = &at91sam9261_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
void __init at91_add_device_serial(void)
{
int i;
@@ -761,7 +1033,9 @@
}
}
#else
-void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
@@ -774,6 +1048,8 @@
*/
static int __init at91_add_standard_devices(void)
{
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
return 0;
}
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 00e27b1..a53ba0f 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -304,34 +304,34 @@
static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller (FIQ) */
7, /* System Peripherals */
- 0, /* Parallel IO Controller A */
- 0, /* Parallel IO Controller B */
- 0, /* Parallel IO Controller C, D and E */
+ 1, /* Parallel IO Controller A */
+ 1, /* Parallel IO Controller B */
+ 1, /* Parallel IO Controller C, D and E */
0,
0,
- 6, /* USART 0 */
- 6, /* USART 1 */
- 6, /* USART 2 */
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
0, /* Multimedia Card Interface 0 */
0, /* Multimedia Card Interface 1 */
- 4, /* CAN */
- 0, /* Two-Wire Interface */
- 6, /* Serial Peripheral Interface 0 */
- 6, /* Serial Peripheral Interface 1 */
- 5, /* Serial Synchronous Controller 0 */
- 5, /* Serial Synchronous Controller 1 */
- 6, /* AC97 Controller */
+ 3, /* CAN */
+ 6, /* Two-Wire Interface */
+ 5, /* Serial Peripheral Interface 0 */
+ 5, /* Serial Peripheral Interface 1 */
+ 4, /* Serial Synchronous Controller 0 */
+ 4, /* Serial Synchronous Controller 1 */
+ 5, /* AC97 Controller */
0, /* Timer Counter 0, 1 and 2 */
0, /* Pulse Width Modulation Controller */
3, /* Ethernet */
0,
0, /* 2D Graphic Engine */
- 3, /* USB Device Port */
+ 2, /* USB Device Port */
0, /* Image Sensor Interface */
3, /* LDC Controller */
0, /* DMA Controller */
0,
- 3, /* USB Host port */
+ 2, /* USB Host port */
0, /* Advanced Interrupt Controller (IRQ0) */
0, /* Advanced Interrupt Controller (IRQ1) */
};
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index ac329a9..0b12e1a 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -12,6 +12,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -32,7 +33,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = 0xffffffffUL;
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
static struct at91_usbh_data usbh_data;
static struct resource usbh_resources[] = {
@@ -53,7 +54,7 @@
.id = -1,
.dev = {
.dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &usbh_data,
},
.resource = usbh_resources,
@@ -136,7 +137,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = 0xffffffffUL;
+static u64 eth_dmamask = DMA_BIT_MASK(32);
static struct at91_eth_data eth_data;
static struct resource eth_resources[] = {
@@ -157,7 +158,7 @@
.id = -1,
.dev = {
.dma_mask = ð_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = ð_data,
},
.resource = eth_resources,
@@ -210,7 +211,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc0_data, mmc1_data;
static struct resource mmc0_resources[] = {
@@ -231,7 +232,7 @@
.id = 0,
.dev = {
.dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc0_data,
},
.resource = mmc0_resources,
@@ -256,7 +257,7 @@
.id = 1,
.dev = {
.dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc1_data,
},
.resource = mmc1_resources,
@@ -382,7 +383,7 @@
return;
csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
- at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC);
+ at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
/* set the bus interface characteristics */
at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
@@ -500,7 +501,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
+static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi0_resources[] = {
[0] = {
@@ -520,7 +521,7 @@
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi0_resources,
.num_resources = ARRAY_SIZE(spi0_resources),
@@ -546,7 +547,7 @@
.id = 1,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi1_resources,
.num_resources = ARRAY_SIZE(spi1_resources),
@@ -612,7 +613,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
-static u64 ac97_dmamask = 0xffffffffUL;
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
static struct atmel_ac97_data ac97_data;
static struct resource ac97_resources[] = {
@@ -633,7 +634,7 @@
.id = 1,
.dev = {
.dma_mask = &ac97_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &ac97_data,
},
.resource = ac97_resources,
@@ -667,7 +668,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = 0xffffffffUL;
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
static struct atmel_lcdfb_info lcdc_data;
static struct resource lcdc_resources[] = {
@@ -688,7 +689,7 @@
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &lcdc_data,
},
.resource = lcdc_resources,
@@ -732,24 +733,242 @@
/* --------------------------------------------------------------------
- * LEDs
+ * Image Sensor Interface
* -------------------------------------------------------------------- */
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
+#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+struct resource isi_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_ISI,
+ .end = AT91SAM9263_BASE_ISI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_ISI,
+ .end = AT91SAM9263_ID_ISI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_isi_device = {
+ .name = "at91_isi",
+ .id = -1,
+ .resource = isi_resources,
+ .num_resources = ARRAY_SIZE(isi_resources),
+};
+
+void __init at91_add_device_isi(void)
{
- /* Enable GPIO to access the LEDs */
- at91_set_gpio_output(cpu_led, 1);
- at91_set_gpio_output(timer_led, 1);
-
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
+ at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */
+ at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */
+ at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */
+ at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */
+ at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */
+ at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */
+ at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */
+ at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */
+ at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */
+ at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */
+ at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */
+ at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
+ at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */
+ at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */
+ at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */
+ at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */
}
#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+void __init at91_add_device_isi(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTT
+ * -------------------------------------------------------------------- */
+
+static struct resource rtt0_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT0,
+ .end = AT91_BASE_SYS + AT91_RTT0 + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9263_rtt0_device = {
+ .name = "at91_rtt",
+ .id = 0,
+ .resource = rtt0_resources,
+ .num_resources = ARRAY_SIZE(rtt0_resources),
+};
+
+static struct resource rtt1_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT1,
+ .end = AT91_BASE_SYS + AT91_RTT1 + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9263_rtt1_device = {
+ .name = "at91_rtt",
+ .id = 1,
+ .resource = rtt1_resources,
+ .num_resources = ARRAY_SIZE(rtt1_resources),
+};
+
+static void __init at91_add_device_rtt(void)
+{
+ platform_device_register(&at91sam9263_rtt0_device);
+ platform_device_register(&at91sam9263_rtt1_device);
+}
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91sam9263_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91sam9263_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_SSC0,
+ .end = AT91SAM9263_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_SSC0,
+ .end = AT91SAM9263_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_B_periph(AT91_PIN_PB0, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_B_periph(AT91_PIN_PB1, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_B_periph(AT91_PIN_PB2, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_B_periph(AT91_PIN_PB3, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_B_periph(AT91_PIN_PB4, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_B_periph(AT91_PIN_PB5, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_SSC1,
+ .end = AT91SAM9263_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_SSC1,
+ .end = AT91SAM9263_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB6, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB7, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB8, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB9, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB10, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB11, 1);
+}
+
+/*
+ * Return the device node so that board init code can use it as the
+ * parent for the device node reflecting how it's used on this board.
+ *
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91SAM9263_ID_SSC0:
+ pdev = &at91sam9263_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
+ break;
+ case AT91SAM9263_ID_SSC1:
+ pdev = &at91sam9263_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
+ break;
+ default:
+ return;
+ }
+
+ platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#endif
@@ -778,12 +997,15 @@
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9263_dbgu_device = {
.name = "atmel_usart",
.id = 0,
.dev = {
- .platform_data = &dbgu_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
},
.resource = dbgu_resources,
.num_resources = ARRAY_SIZE(dbgu_resources),
@@ -813,23 +1035,29 @@
.use_dma_rx = 1,
};
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9263_uart0_device = {
.name = "atmel_usart",
.id = 1,
.dev = {
- .platform_data = &uart0_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
},
.resource = uart0_resources,
.num_resources = ARRAY_SIZE(uart0_resources),
};
-static inline void configure_usart0_pins(void)
+static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
- at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
- at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
}
static struct resource uart1_resources[] = {
@@ -850,23 +1078,29 @@
.use_dma_rx = 1,
};
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9263_uart1_device = {
.name = "atmel_usart",
.id = 2,
.dev = {
- .platform_data = &uart1_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
},
.resource = uart1_resources,
.num_resources = ARRAY_SIZE(uart1_resources),
};
-static inline void configure_usart1_pins(void)
+static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
- at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
- at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
}
static struct resource uart2_resources[] = {
@@ -887,29 +1121,35 @@
.use_dma_rx = 1,
};
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9263_uart2_device = {
.name = "atmel_usart",
.id = 3,
.dev = {
- .platform_data = &uart2_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
},
.resource = uart2_resources,
.num_resources = ARRAY_SIZE(uart2_resources),
};
-static inline void configure_usart2_pins(void)
+static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
- at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
- at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
}
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
-void __init at91_init_serial(struct at91_uart_config *config)
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
{
int i;
@@ -917,17 +1157,17 @@
for (i = 0; i < config->nr_tty; i++) {
switch (config->tty_map[i]) {
case 0:
- configure_usart0_pins();
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91sam9263_uart0_device;
at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
break;
case 1:
- configure_usart1_pins();
+ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91sam9263_uart1_device;
at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
break;
case 2:
- configure_usart2_pins();
+ configure_usart2_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91sam9263_uart2_device;
at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
break;
@@ -949,6 +1189,48 @@
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91sam9263_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91SAM9263_ID_US0:
+ pdev = &at91sam9263_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9263_ID_US1:
+ pdev = &at91sam9263_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9263_ID_US2:
+ pdev = &at91sam9263_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
void __init at91_add_device_serial(void)
{
int i;
@@ -960,6 +1242,8 @@
}
#else
void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
@@ -971,6 +1255,8 @@
*/
static int __init at91_add_standard_devices(void)
{
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
return 0;
}
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 2bd60a3..f43b5c3 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -9,6 +9,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -29,7 +30,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc_data;
static struct resource mmc_resources[] = {
@@ -50,7 +51,7 @@
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc_data,
},
.resource = mmc_resources,
@@ -247,7 +248,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
+static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi_resources[] = {
[0] = {
@@ -267,7 +268,7 @@
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi_resources,
.num_resources = ARRAY_SIZE(spi_resources),
@@ -312,7 +313,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = 0xffffffffUL;
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
static struct atmel_lcdfb_info lcdc_data;
static struct resource lcdc_resources[] = {
@@ -340,7 +341,7 @@
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &lcdc_data,
},
.resource = lcdc_resources,
@@ -384,24 +385,196 @@
/* --------------------------------------------------------------------
- * LEDs
+ * RTC
* -------------------------------------------------------------------- */
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
+#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
+static struct platform_device at91sam9rl_rtc_device = {
+ .name = "at91_rtc",
+ .id = -1,
+ .num_resources = 0,
+};
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+static void __init at91_add_device_rtc(void)
{
- /* Enable GPIO to access the LEDs */
- at91_set_gpio_output(cpu_led, 1);
- at91_set_gpio_output(timer_led, 1);
-
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
+ platform_device_register(&at91sam9rl_rtc_device);
}
#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+static void __init at91_add_device_rtc(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTT
+ * -------------------------------------------------------------------- */
+
+static struct resource rtt_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT,
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9rl_rtt_device = {
+ .name = "at91_rtt",
+ .id = -1,
+ .resource = rtt_resources,
+ .num_resources = ARRAY_SIZE(rtt_resources),
+};
+
+static void __init at91_add_device_rtt(void)
+{
+ platform_device_register(&at91sam9rl_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91sam9rl_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91sam9rl_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_SSC0,
+ .end = AT91SAM9RL_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_SSC0,
+ .end = AT91SAM9RL_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9rl_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PC0, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PC1, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PA15, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PA16, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_B_periph(AT91_PIN_PA10, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_B_periph(AT91_PIN_PA22, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_SSC1,
+ .end = AT91SAM9RL_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_SSC1,
+ .end = AT91SAM9RL_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9rl_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_B_periph(AT91_PIN_PA29, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_B_periph(AT91_PIN_PA30, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_B_periph(AT91_PIN_PA13, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_B_periph(AT91_PIN_PA14, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_B_periph(AT91_PIN_PA9, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_B_periph(AT91_PIN_PA8, 1);
+}
+
+/*
+ * Return the device node so that board init code can use it as the
+ * parent for the device node reflecting how it's used on this board.
+ *
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91SAM9RL_ID_SSC0:
+ pdev = &at91sam9rl_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
+ break;
+ case AT91SAM9RL_ID_SSC1:
+ pdev = &at91sam9rl_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
+ break;
+ default:
+ return;
+ }
+
+ platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#endif
@@ -429,12 +602,15 @@
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9rl_dbgu_device = {
.name = "atmel_usart",
.id = 0,
.dev = {
- .platform_data = &dbgu_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
},
.resource = dbgu_resources,
.num_resources = ARRAY_SIZE(dbgu_resources),
@@ -464,23 +640,37 @@
.use_dma_rx = 1,
};
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9rl_uart0_device = {
.name = "atmel_usart",
.id = 1,
.dev = {
- .platform_data = &uart0_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
},
.resource = uart0_resources,
.num_resources = ARRAY_SIZE(uart0_resources),
};
-static inline void configure_usart0_pins(void)
+static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
- at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */
- at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */
+ if (pins & ATMEL_UART_DSR)
+ at91_set_A_periph(AT91_PIN_PD14, 0); /* DSR0 */
+ if (pins & ATMEL_UART_DTR)
+ at91_set_A_periph(AT91_PIN_PD15, 0); /* DTR0 */
+ if (pins & ATMEL_UART_DCD)
+ at91_set_A_periph(AT91_PIN_PD16, 0); /* DCD0 */
+ if (pins & ATMEL_UART_RI)
+ at91_set_A_periph(AT91_PIN_PD17, 0); /* RI0 */
}
static struct resource uart1_resources[] = {
@@ -501,21 +691,29 @@
.use_dma_rx = 1,
};
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9rl_uart1_device = {
.name = "atmel_usart",
.id = 2,
.dev = {
- .platform_data = &uart1_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
},
.resource = uart1_resources,
.num_resources = ARRAY_SIZE(uart1_resources),
};
-static inline void configure_usart1_pins(void)
+static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PA18, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PA19, 0); /* CTS1 */
}
static struct resource uart2_resources[] = {
@@ -536,21 +734,29 @@
.use_dma_rx = 1,
};
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9rl_uart2_device = {
.name = "atmel_usart",
.id = 3,
.dev = {
- .platform_data = &uart2_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
},
.resource = uart2_resources,
.num_resources = ARRAY_SIZE(uart2_resources),
};
-static inline void configure_usart2_pins(void)
+static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA29, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA30, 0); /* CTS2 */
}
static struct resource uart3_resources[] = {
@@ -571,27 +777,35 @@
.use_dma_rx = 1,
};
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9rl_uart3_device = {
.name = "atmel_usart",
.id = 4,
.dev = {
- .platform_data = &uart3_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart3_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart3_data,
},
.resource = uart3_resources,
.num_resources = ARRAY_SIZE(uart3_resources),
};
-static inline void configure_usart3_pins(void)
+static inline void configure_usart3_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */
at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PD4, 0); /* RTS3 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */
}
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
-void __init at91_init_serial(struct at91_uart_config *config)
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
{
int i;
@@ -599,22 +813,22 @@
for (i = 0; i < config->nr_tty; i++) {
switch (config->tty_map[i]) {
case 0:
- configure_usart0_pins();
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91sam9rl_uart0_device;
at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart");
break;
case 1:
- configure_usart1_pins();
+ configure_usart1_pins(0);
at91_uarts[i] = &at91sam9rl_uart1_device;
at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart");
break;
case 2:
- configure_usart2_pins();
+ configure_usart2_pins(0);
at91_uarts[i] = &at91sam9rl_uart2_device;
at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart");
break;
case 3:
- configure_usart3_pins();
+ configure_usart3_pins(0);
at91_uarts[i] = &at91sam9rl_uart3_device;
at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart");
break;
@@ -636,6 +850,53 @@
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91sam9rl_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91SAM9RL_ID_US0:
+ pdev = &at91sam9rl_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9RL_ID_US1:
+ pdev = &at91sam9rl_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9RL_ID_US2:
+ pdev = &at91sam9rl_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9RL_ID_US3:
+ pdev = &at91sam9rl_uart3_device;
+ configure_usart3_pins(pins);
+ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
void __init at91_add_device_serial(void)
{
int i;
@@ -646,7 +907,9 @@
}
}
#else
-void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
@@ -659,6 +922,9 @@
*/
static int __init at91_add_standard_devices(void)
{
+ at91_add_device_rtc();
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
return 0;
}
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
new file mode 100644
index 0000000..1854371
--- /dev/null
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -0,0 +1,359 @@
+/*
+ * linux/arch/arm/mach-at91/board-cap9adk.c
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/fb.h>
+#include <linux/mtd/physmap.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91cap9_matrix.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+static void __init cap9adk_map_io(void)
+{
+ /* Initialize processor: 12 MHz crystal */
+ at91cap9_initialize(12000000);
+
+ /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */
+ at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11);
+ /* ... POWER LED always on */
+ at91_set_gpio_output(AT91_PIN_PC29, 1);
+
+ /* Setup the serial ports and console */
+ at91_register_uart(0, 0, 0); /* DBGU = ttyS0 */
+ at91_set_serial_console(0);
+}
+
+static void __init cap9adk_init_irq(void)
+{
+ at91cap9_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata cap9adk_usbh_data = {
+ .ports = 2,
+};
+
+
+/*
+ * ADS7846 Touchscreen
+ */
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+static int ads7843_pendown_state(void)
+{
+ return !at91_get_gpio_value(AT91_PIN_PC4); /* Touchscreen PENIRQ */
+}
+
+static struct ads7846_platform_data ads_info = {
+ .model = 7843,
+ .x_min = 150,
+ .x_max = 3830,
+ .y_min = 190,
+ .y_max = 3830,
+ .vref_delay_usecs = 100,
+ .x_plate_ohms = 450,
+ .y_plate_ohms = 250,
+ .pressure_max = 15000,
+ .debounce_max = 1,
+ .debounce_rep = 0,
+ .debounce_tol = (~0),
+ .get_pendown_state = ads7843_pendown_state,
+};
+
+static void __init cap9adk_add_device_ts(void)
+{
+ at91_set_gpio_input(AT91_PIN_PC4, 1); /* Touchscreen PENIRQ */
+ at91_set_gpio_input(AT91_PIN_PC5, 1); /* Touchscreen BUSY */
+}
+#else
+static void __init cap9adk_add_device_ts(void) {}
+#endif
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info cap9adk_spi_devices[] = {
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+ { /* DataFlash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#endif
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+ {
+ .modalias = "ads7846",
+ .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */
+ .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
+ .bus_num = 0,
+ .platform_data = &ads_info,
+ .irq = AT91_PIN_PC4,
+ },
+#endif
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata cap9adk_mmc_data = {
+ .wire4 = 1,
+// .det_pin = ... not connected
+// .wp_pin = ... not connected
+// .vcc_pin = ... not connected
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata cap9adk_macb_data = {
+ .is_rmii = 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
+ {
+ .name = "NAND partition",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(cap9adk_nand_partitions);
+ return cap9adk_nand_partitions;
+}
+
+static struct at91_nand_data __initdata cap9adk_nand_data = {
+ .ale = 21,
+ .cle = 22,
+// .det_pin = ... not connected
+// .rdy_pin = ... not connected
+ .enable_pin = AT91_PIN_PD15,
+ .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+
+/*
+ * NOR flash
+ */
+static struct mtd_partition cap9adk_nor_partitions[] = {
+ {
+ .name = "NOR partition",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data cap9adk_nor_data = {
+ .width = 2,
+ .parts = cap9adk_nor_partitions,
+ .nr_parts = ARRAY_SIZE(cap9adk_nor_partitions),
+};
+
+#define NOR_BASE AT91_CHIPSELECT_0
+#define NOR_SIZE 0x800000
+
+static struct resource nor_flash_resources[] = {
+ {
+ .start = NOR_BASE,
+ .end = NOR_BASE + NOR_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device cap9adk_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &cap9adk_nor_data,
+ },
+ .resource = nor_flash_resources,
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+};
+
+static __init void cap9adk_add_device_nor(void)
+{
+ unsigned long csa;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(0), AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2)
+ | AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2));
+
+ at91_sys_write(AT91_SMC_PULSE(0), AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10)
+ | AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10));
+
+ at91_sys_write(AT91_SMC_CYCLE(0), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
+
+ at91_sys_write(AT91_SMC_MODE(0), AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+ | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
+ | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
+
+ platform_device_register(&cap9adk_nor_flash);
+}
+
+
+/*
+ * LCD Controller
+ */
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static struct fb_videomode at91_tft_vga_modes[] = {
+ {
+ .name = "TX09D50VM1CCA @ 60",
+ .refresh = 60,
+ .xres = 240, .yres = 320,
+ .pixclock = KHZ2PICOS(4965),
+
+ .left_margin = 1, .right_margin = 33,
+ .upper_margin = 1, .lower_margin = 0,
+ .hsync_len = 5, .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+};
+
+static struct fb_monspecs at91fb_default_monspecs = {
+ .manufacturer = "HIT",
+ .monitor = "TX09D70VM1CCA",
+
+ .modedb = at91_tft_vga_modes,
+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
+ .hfmin = 15000,
+ .hfmax = 64000,
+ .vfmin = 50,
+ .vfmax = 150,
+};
+
+#define AT91CAP9_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+ | ATMEL_LCDC_DISTYPE_TFT \
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+static void at91_lcdc_power_control(int on)
+{
+ if (on)
+ at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */
+ else
+ at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */
+}
+
+/* Driver datas */
+static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = {
+ .default_bpp = 16,
+ .default_dmacon = ATMEL_LCDC_DMAEN,
+ .default_lcdcon2 = AT91CAP9_DEFAULT_LCDCON2,
+ .default_monspecs = &at91fb_default_monspecs,
+ .atmel_lcdfb_power_control = at91_lcdc_power_control,
+ .guard_time = 1,
+};
+
+#else
+static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
+#endif
+
+
+/*
+ * AC97
+ */
+static struct atmel_ac97_data cap9adk_ac97_data = {
+// .reset_pin = ... not connected
+};
+
+
+static void __init cap9adk_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
+ at91_add_device_usbh(&cap9adk_usbh_data);
+ /* SPI */
+ at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
+ /* Touchscreen */
+ cap9adk_add_device_ts();
+ /* MMC */
+ at91_add_device_mmc(1, &cap9adk_mmc_data);
+ /* Ethernet */
+ at91_add_device_eth(&cap9adk_macb_data);
+ /* NAND */
+ at91_add_device_nand(&cap9adk_nand_data);
+ /* NOR Flash */
+ cap9adk_add_device_nor();
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* LCD Controller */
+ set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH);
+ at91_add_device_lcdc(&cap9adk_lcdc_data);
+ /* AC97 */
+ at91_add_device_ac97(&cap9adk_ac97_data);
+}
+
+MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
+ /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = cap9adk_map_io,
+ .init_irq = cap9adk_init_irq,
+ .init_machine = cap9adk_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index d0aa20c..0e2a11f 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -25,6 +25,8 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
#include <asm/hardware.h>
#include <asm/setup.h>
@@ -156,6 +158,85 @@
.num_resources = ARRAY_SIZE(csb_flash_resources),
};
+/*
+ * GPIO Buttons (on CSB300)
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button csb300_buttons[] = {
+ {
+ .gpio = AT91_PIN_PB29,
+ .code = BTN_0,
+ .desc = "sw0",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+ {
+ .gpio = AT91_PIN_PB28,
+ .code = BTN_1,
+ .desc = "sw1",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+ {
+ .gpio = AT91_PIN_PA21,
+ .code = BTN_2,
+ .desc = "sw2",
+ .active_low = 1,
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data csb300_button_data = {
+ .buttons = csb300_buttons,
+ .nbuttons = ARRAY_SIZE(csb300_buttons),
+};
+
+static struct platform_device csb300_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &csb300_button_data,
+ }
+};
+
+static void __init csb300_add_device_buttons(void)
+{
+ at91_set_gpio_input(AT91_PIN_PB29, 0); /* sw0 */
+ at91_set_deglitch(AT91_PIN_PB29, 1);
+ at91_set_gpio_input(AT91_PIN_PB28, 0); /* sw1 */
+ at91_set_deglitch(AT91_PIN_PB28, 1);
+ at91_set_gpio_input(AT91_PIN_PA21, 0); /* sw2 */
+ at91_set_deglitch(AT91_PIN_PA21, 1);
+
+ platform_device_register(&csb300_button_device);
+}
+#else
+static void __init csb300_add_device_buttons(void) {}
+#endif
+
+static struct gpio_led csb_leds[] = {
+ { /* "led0", yellow */
+ .name = "led0",
+ .gpio = AT91_PIN_PB2,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* "led1", green */
+ .name = "led1",
+ .gpio = AT91_PIN_PB1,
+ .active_low = 1,
+ .default_trigger = "mmc0",
+ },
+ { /* "led2", yellow */
+ .name = "led2",
+ .gpio = AT91_PIN_PB0,
+ .active_low = 1,
+ .default_trigger = "ide-disk",
+ },
+};
+
+
static void __init csb337_board_init(void)
{
/* Serial */
@@ -177,6 +258,10 @@
at91_add_device_mmc(0, &csb337_mmc_data);
/* NOR flash */
platform_device_register(&csb_flash);
+ /* LEDs */
+ at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
+ /* Switches on CSB300 */
+ csb300_add_device_buttons();
}
MACHINE_START(CSB337, "Cogent CSB337")
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index 40c9e43..0a897ef 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -183,6 +183,14 @@
.num_resources = 1,
};
+static struct gpio_led dk_leds[] = {
+ {
+ .name = "led0",
+ .gpio = AT91_PIN_PB2,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ }
+};
static void __init dk_board_init(void)
{
@@ -213,6 +221,8 @@
at91_add_device_nand(&dk_nand_data);
/* NOR Flash */
platform_device_register(&dk_flash);
+ /* LEDs */
+ at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
/* VGA */
// dk_add_device_video();
}
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 53a5ef9..0574e50 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -141,6 +141,25 @@
.num_resources = 1,
};
+static struct gpio_led ek_leds[] = {
+ { /* "user led 1", DS2 */
+ .name = "green",
+ .gpio = AT91_PIN_PB0,
+ .active_low = 1,
+ .default_trigger = "mmc0",
+ },
+ { /* "user led 2", DS4 */
+ .name = "yellow",
+ .gpio = AT91_PIN_PB1,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* "user led 3", DS6 */
+ .name = "red",
+ .gpio = AT91_PIN_PB2,
+ .active_low = 1,
+ }
+};
static void __init ek_board_init(void)
{
@@ -167,6 +186,8 @@
#endif
/* NOR Flash */
platform_device_register(&ek_flash);
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* VGA */
// ek_add_device_video();
}
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 550ae59..aa29ea5 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -280,6 +280,68 @@
* LCD Controller
*/
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+
+#if defined(CONFIG_FB_ATMEL_STN)
+
+/* STN */
+static struct fb_videomode at91_stn_modes[] = {
+ {
+ .name = "SP06Q002 @ 75",
+ .refresh = 75,
+ .xres = 320, .yres = 240,
+ .pixclock = KHZ2PICOS(1440),
+
+ .left_margin = 1, .right_margin = 1,
+ .upper_margin = 0, .lower_margin = 0,
+ .hsync_len = 1, .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+};
+
+static struct fb_monspecs at91fb_default_stn_monspecs = {
+ .manufacturer = "HIT",
+ .monitor = "SP06Q002",
+
+ .modedb = at91_stn_modes,
+ .modedb_len = ARRAY_SIZE(at91_stn_modes),
+ .hfmin = 15000,
+ .hfmax = 64000,
+ .vfmin = 50,
+ .vfmax = 150,
+};
+
+#define AT91SAM9261_DEFAULT_STN_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+ | ATMEL_LCDC_DISTYPE_STNMONO \
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE \
+ | ATMEL_LCDC_IFWIDTH_4 \
+ | ATMEL_LCDC_SCANMOD_SINGLE)
+
+static void at91_lcdc_stn_power_control(int on)
+{
+ /* backlight */
+ if (on) { /* power up */
+ at91_set_gpio_value(AT91_PIN_PC14, 0);
+ at91_set_gpio_value(AT91_PIN_PC15, 0);
+ } else { /* power down */
+ at91_set_gpio_value(AT91_PIN_PC14, 1);
+ at91_set_gpio_value(AT91_PIN_PC15, 1);
+ }
+}
+
+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+ .default_bpp = 1,
+ .default_dmacon = ATMEL_LCDC_DMAEN,
+ .default_lcdcon2 = AT91SAM9261_DEFAULT_STN_LCDCON2,
+ .default_monspecs = &at91fb_default_stn_monspecs,
+ .atmel_lcdfb_power_control = at91_lcdc_stn_power_control,
+ .guard_time = 1,
+};
+
+#else
+
+/* TFT */
static struct fb_videomode at91_tft_vga_modes[] = {
{
.name = "TX09D50VM1CCA @ 60",
@@ -296,7 +358,7 @@
},
};
-static struct fb_monspecs at91fb_default_monspecs = {
+static struct fb_monspecs at91fb_default_tft_monspecs = {
.manufacturer = "HIT",
.monitor = "TX09D50VM1CCA",
@@ -308,11 +370,11 @@
.vfmax = 150,
};
-#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+#define AT91SAM9261_DEFAULT_TFT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
| ATMEL_LCDC_DISTYPE_TFT \
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-static void at91_lcdc_power_control(int on)
+static void at91_lcdc_tft_power_control(int on)
{
if (on)
at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */
@@ -320,15 +382,15 @@
at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */
}
-/* Driver datas */
static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN,
- .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2,
- .default_monspecs = &at91fb_default_monspecs,
- .atmel_lcdfb_power_control = at91_lcdc_power_control,
+ .default_lcdcon2 = AT91SAM9261_DEFAULT_TFT_LCDCON2,
+ .default_monspecs = &at91fb_default_tft_monspecs,
+ .atmel_lcdfb_power_control = at91_lcdc_tft_power_control,
.guard_time = 1,
};
+#endif
#else
static struct atmel_lcdfb_info __initdata ek_lcdc_data;
@@ -342,25 +404,25 @@
static struct gpio_keys_button ek_buttons[] = {
{
.gpio = AT91_PIN_PA27,
- .keycode = BTN_0,
+ .code = BTN_0,
.desc = "Button 0",
.active_low = 1,
},
{
.gpio = AT91_PIN_PA26,
- .keycode = BTN_1,
+ .code = BTN_1,
.desc = "Button 1",
.active_low = 1,
},
{
.gpio = AT91_PIN_PA25,
- .keycode = BTN_2,
+ .code = BTN_2,
.desc = "Button 2",
.active_low = 1,
},
{
.gpio = AT91_PIN_PA24,
- .keycode = BTN_3,
+ .code = BTN_3,
.desc = "Button 3",
.active_low = 1,
}
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index ab9dcc0..f09347a 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -27,6 +27,8 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/fb.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
#include <video/atmel_lcdc.h>
@@ -163,6 +165,7 @@
* MACB Ethernet device
*/
static struct at91_eth_data __initdata ek_macb_data = {
+ .phy_irq_pin = AT91_PIN_PE31,
.is_rmii = 1,
};
@@ -264,6 +267,55 @@
/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ { /* BP1, "leftclic" */
+ .code = BTN_LEFT,
+ .gpio = AT91_PIN_PC5,
+ .active_low = 1,
+ .desc = "left_click",
+ .wakeup = 1,
+ },
+ { /* BP2, "rightclic" */
+ .code = BTN_RIGHT,
+ .gpio = AT91_PIN_PC4,
+ .active_low = 1,
+ .desc = "right_click",
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ at91_set_GPIO_periph(AT91_PIN_PC5, 0); /* left button */
+ at91_set_deglitch(AT91_PIN_PC5, 1);
+ at91_set_GPIO_periph(AT91_PIN_PC4, 0); /* right button */
+ at91_set_deglitch(AT91_PIN_PC4, 1);
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
+/*
* AC97
*/
static struct atmel_ac97_data ek_ac97_data = {
@@ -271,6 +323,30 @@
};
+/*
+ * LEDs ... these could all be PWM-driven, for variable brightness
+ */
+static struct gpio_led ek_leds[] = {
+ { /* "left" led, green, userled1, pwm1 */
+ .name = "ds1",
+ .gpio = AT91_PIN_PB8,
+ .active_low = 1,
+ .default_trigger = "mmc0",
+ },
+ { /* "right" led, green, userled2, pwm2 */
+ .name = "ds2",
+ .gpio = AT91_PIN_PC29,
+ .active_low = 1,
+ .default_trigger = "nand-disk",
+ },
+ { /* "power" led, yellow, pwm0 */
+ .name = "ds3",
+ .gpio = AT91_PIN_PB7,
+ .default_trigger = "heartbeat",
+ },
+};
+
+
static void __init ek_board_init(void)
{
/* Serial */
@@ -294,8 +370,12 @@
at91_add_device_i2c(NULL, 0);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
+ /* Push Buttons */
+ ek_add_device_buttons();
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
}
MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 57c3b64..ec76eea 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -574,6 +574,8 @@
} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+ } else if (cpu_is_at91cap9()) {
+ uhpck.pmc_mask = AT91CAP9_PMC_UHP;
}
at91_sys_write(AT91_CKGR_PLLBR, 0);
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 77d4c0a..b5daf7f 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -15,6 +15,7 @@
extern void __init at91sam9263_initialize(unsigned long main_clock);
extern void __init at91sam9rl_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
+extern void __init at91cap9_initialize(unsigned long main_clock);
/* Interrupts */
extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
@@ -23,6 +24,7 @@
extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
+extern void __init at91cap9_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index aa2d365..6aeddd6 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -13,6 +13,8 @@
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/module.h>
@@ -414,6 +416,66 @@
/*--------------------------------------------------------------------------*/
+#ifdef CONFIG_DEBUG_FS
+
+static int at91_gpio_show(struct seq_file *s, void *unused)
+{
+ int bank, j;
+
+ /* print heading */
+ seq_printf(s, "Pin\t");
+ for (bank = 0; bank < gpio_banks; bank++) {
+ seq_printf(s, "PIO%c\t", 'A' + bank);
+ };
+ seq_printf(s, "\n\n");
+
+ /* print pin status */
+ for (j = 0; j < 32; j++) {
+ seq_printf(s, "%i:\t", j);
+
+ for (bank = 0; bank < gpio_banks; bank++) {
+ unsigned pin = PIN_BASE + (32 * bank) + j;
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (__raw_readl(pio + PIO_PSR) & mask)
+ seq_printf(s, "GPIO:%s", __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0");
+ else
+ seq_printf(s, "%s", __raw_readl(pio + PIO_ABSR) & mask ? "B" : "A");
+
+ seq_printf(s, "\t");
+ }
+
+ seq_printf(s, "\n");
+ }
+
+ return 0;
+}
+
+static int at91_gpio_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, at91_gpio_show, NULL);
+}
+
+static const struct file_operations at91_gpio_operations = {
+ .open = at91_gpio_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init at91_gpio_debugfs_init(void)
+{
+ /* /sys/kernel/debug/at91_gpio */
+ (void) debugfs_create_file("at91_gpio", S_IFREG | S_IRUGO, NULL, NULL, &at91_gpio_operations);
+ return 0;
+}
+postcore_initcall(at91_gpio_debugfs_init);
+
+#endif
+
+/*--------------------------------------------------------------------------*/
+
/*
* Called from the processor-specific init to enable GPIO interrupt support.
*/
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 0d51449..9cdcda5 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -14,11 +14,62 @@
#include <linux/init.h>
#include <asm/mach-types.h>
-#include <asm/leds.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
+/* ------------------------------------------------------------------------- */
+
+#if defined(CONFIG_NEW_LEDS)
+
+#include <linux/platform_device.h>
+
+/*
+ * New cross-platform LED support.
+ */
+
+static struct gpio_led_platform_data led_data;
+
+static struct platform_device at91_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &led_data,
+};
+
+void __init at91_gpio_leds(struct gpio_led *leds, int nr)
+{
+ int i;
+
+ if (!nr)
+ return;
+
+ for (i = 0; i < nr; i++)
+ at91_set_gpio_output(leds[i].gpio, leds[i].active_low);
+
+ led_data.leds = leds;
+ led_data.num_leds = nr;
+ platform_device_register(&at91_leds);
+}
+
+#else
+void __init at91_gpio_leds(struct gpio_led *leds, int nr) {}
+#endif
+
+
+/* ------------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+
+#include <asm/leds.h>
+
+/*
+ * Old ARM-specific LED framework; not fully functional when generic time is
+ * in use.
+ */
+
+static u8 at91_leds_cpu;
+static u8 at91_leds_timer;
+
static inline void at91_led_on(unsigned int led)
{
at91_set_gpio_value(led, 0);
@@ -93,3 +144,18 @@
}
__initcall(leds_init);
+
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+ /* Enable GPIO to access the LEDs */
+ at91_set_gpio_output(cpu_led, 1);
+ at91_set_gpio_output(timer_led, 1);
+
+ at91_leds_cpu = cpu_led;
+ at91_leds_timer = timer_led;
+}
+
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 98cb614..4b120cc 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -80,6 +80,11 @@
pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
}
+ } else if (cpu_is_at91cap9()) {
+ if ((scsr & AT91CAP9_PMC_UHP) != 0) {
+ pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
+ return 0;
+ }
}
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c
index f428af7..e5dc33f 100644
--- a/arch/arm/mach-clps711x/time.c
+++ b/arch/arm/mach-clps711x/time.c
@@ -50,9 +50,7 @@
static irqreturn_t
p720t_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
timer_tick();
- write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
index 986205e..2ac6367 100644
--- a/arch/arm/mach-clps7500/core.c
+++ b/arch/arm/mach-clps7500/core.c
@@ -298,8 +298,6 @@
static irqreturn_t
clps7500_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
timer_tick();
/* Why not using do_leds interface?? */
@@ -313,8 +311,6 @@
}
}
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 8c1b569..7710e14 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -178,8 +178,6 @@
{
u32 count;
- write_seqlock(&xtime_lock);
-
/* latch and read timer 1 */
__raw_writeb(0x40, PIT_CTRL);
count = __raw_readb(PIT_T1);
@@ -192,8 +190,6 @@
timer_tick();
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 70b2c78..91f6a07 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -3,6 +3,7 @@
* Core routines for Cirrus EP93xx chips.
*
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
*
* Thanks go to Michael Burian and Ray Lehtiniemi for their key
* role in the ep93xx linux community.
@@ -21,7 +22,6 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/bitops.h>
-#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/device.h>
@@ -99,8 +99,6 @@
static int ep93xx_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
__raw_writel(1, EP93XX_TIMER1_CLEAR);
while ((signed long)
(__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time)
@@ -109,8 +107,6 @@
timer_tick();
}
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
@@ -157,38 +153,41 @@
static unsigned char gpio_int_type1[3];
static unsigned char gpio_int_type2[3];
-static void update_gpio_int_params(int abf)
+/* Port ordering is: A B F */
+static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
+static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
+static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
+static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x5c };
+
+static void update_gpio_int_params(unsigned port)
{
- if (abf == 0) {
- __raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE);
- __raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2);
- __raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1);
- __raw_writeb(gpio_int_unmasked[0] & gpio_int_enabled[0], EP93XX_GPIO_A_INT_ENABLE);
- } else if (abf == 1) {
- __raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE);
- __raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2);
- __raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1);
- __raw_writeb(gpio_int_unmasked[1] & gpio_int_enabled[1], EP93XX_GPIO_B_INT_ENABLE);
- } else if (abf == 2) {
- __raw_writeb(0, EP93XX_GPIO_F_INT_ENABLE);
- __raw_writeb(gpio_int_type2[2], EP93XX_GPIO_F_INT_TYPE2);
- __raw_writeb(gpio_int_type1[2], EP93XX_GPIO_F_INT_TYPE1);
- __raw_writeb(gpio_int_unmasked[2] & gpio_int_enabled[2], EP93XX_GPIO_F_INT_ENABLE);
- } else {
- BUG();
- }
+ BUG_ON(port > 2);
+
+ __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
+
+ __raw_writeb(gpio_int_type2[port],
+ EP93XX_GPIO_REG(int_type2_register_offset[port]));
+
+ __raw_writeb(gpio_int_type1[port],
+ EP93XX_GPIO_REG(int_type1_register_offset[port]));
+
+ __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
+ EP93XX_GPIO_REG(int_en_register_offset[port]));
}
-
-static unsigned char data_register_offset[8] = {
- 0x00, 0x04, 0x08, 0x0c, 0x20, 0x30, 0x38, 0x40,
+/* Port ordering is: A B F D E C G H */
+static const u8 data_register_offset[8] = {
+ 0x00, 0x04, 0x30, 0x0c, 0x20, 0x08, 0x38, 0x40,
};
-static unsigned char data_direction_register_offset[8] = {
- 0x10, 0x14, 0x18, 0x1c, 0x24, 0x34, 0x3c, 0x44,
+static const u8 data_direction_register_offset[8] = {
+ 0x10, 0x14, 0x34, 0x1c, 0x24, 0x18, 0x3c, 0x44,
};
-void gpio_line_config(int line, int direction)
+#define GPIO_IN 0
+#define GPIO_OUT 1
+
+static void ep93xx_gpio_set_direction(unsigned line, int direction)
{
unsigned int data_direction_register;
unsigned long flags;
@@ -199,14 +198,10 @@
local_irq_save(flags);
if (direction == GPIO_OUT) {
- if (line >= 0 && line < 16) {
- /* Port A/B. */
+ if (line >= 0 && line <= EP93XX_GPIO_LINE_MAX_IRQ) {
+ /* Port A/B/F */
gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
update_gpio_int_params(line >> 3);
- } else if (line >= 40 && line < 48) {
- /* Port F. */
- gpio_int_unmasked[2] &= ~(1 << (line & 7));
- update_gpio_int_params(2);
}
v = __raw_readb(data_direction_register);
@@ -219,39 +214,58 @@
}
local_irq_restore(flags);
}
-EXPORT_SYMBOL(gpio_line_config);
-int gpio_line_get(int line)
+int gpio_direction_input(unsigned gpio)
+{
+ if (gpio > EP93XX_GPIO_LINE_MAX)
+ return -EINVAL;
+
+ ep93xx_gpio_set_direction(gpio, GPIO_IN);
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+ if (gpio > EP93XX_GPIO_LINE_MAX)
+ return -EINVAL;
+
+ gpio_set_value(gpio, value);
+ ep93xx_gpio_set_direction(gpio, GPIO_OUT);
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+int gpio_get_value(unsigned gpio)
{
unsigned int data_register;
- data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
+ data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]);
- return !!(__raw_readb(data_register) & (1 << (line & 7)));
+ return !!(__raw_readb(data_register) & (1 << (gpio & 7)));
}
-EXPORT_SYMBOL(gpio_line_get);
+EXPORT_SYMBOL(gpio_get_value);
-void gpio_line_set(int line, int value)
+void gpio_set_value(unsigned gpio, int value)
{
unsigned int data_register;
unsigned long flags;
unsigned char v;
- data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
+ data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]);
local_irq_save(flags);
- if (value == EP93XX_GPIO_HIGH) {
- v = __raw_readb(data_register);
- v |= 1 << (line & 7);
- __raw_writeb(v, data_register);
- } else if (value == EP93XX_GPIO_LOW) {
- v = __raw_readb(data_register);
- v &= ~(1 << (line & 7));
- __raw_writeb(v, data_register);
- }
+ v = __raw_readb(data_register);
+ if (value)
+ v |= 1 << (gpio & 7);
+ else
+ v &= ~(1 << (gpio & 7));
+ __raw_writeb(v, data_register);
local_irq_restore(flags);
}
-EXPORT_SYMBOL(gpio_line_set);
+EXPORT_SYMBOL(gpio_set_value);
/*************************************************************************
@@ -265,47 +279,67 @@
status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
- desc = irq_desc + IRQ_EP93XX_GPIO(0) + i;
- desc_handle_irq(IRQ_EP93XX_GPIO(0) + i, desc);
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
+ desc = irq_desc + gpio_irq;
+ desc_handle_irq(gpio_irq, desc);
}
}
status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
- desc = irq_desc + IRQ_EP93XX_GPIO(8) + i;
- desc_handle_irq(IRQ_EP93XX_GPIO(8) + i, desc);
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
+ desc = irq_desc + gpio_irq;
+ desc_handle_irq(gpio_irq, desc);
}
}
}
static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
{
- int gpio_irq = IRQ_EP93XX_GPIO(16) + (((irq + 1) & 7) ^ 4);
+ /*
+ * map discontiguous hw irq range to continous sw irq range:
+ *
+ * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
+ */
+ int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
desc_handle_irq(gpio_irq, irq_desc + gpio_irq);
}
+static void ep93xx_gpio_irq_ack(unsigned int irq)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+ int port_mask = 1 << (line & 7);
+
+ if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
+ gpio_int_type2[port] ^= port_mask; /* switch edge direction */
+ update_gpio_int_params(port);
+ }
+
+ __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
+}
+
static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
{
- int line = irq - IRQ_EP93XX_GPIO(0);
+ int line = irq_to_gpio(irq);
int port = line >> 3;
+ int port_mask = 1 << (line & 7);
- gpio_int_unmasked[port] &= ~(1 << (line & 7));
+ if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE)
+ gpio_int_type2[port] ^= port_mask; /* switch edge direction */
+
+ gpio_int_unmasked[port] &= ~port_mask;
update_gpio_int_params(port);
- if (port == 0) {
- __raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK);
- } else if (port == 1) {
- __raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
- } else if (port == 2) {
- __raw_writel(1 << (line & 7), EP93XX_GPIO_F_INT_ACK);
- }
+ __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
}
static void ep93xx_gpio_irq_mask(unsigned int irq)
{
- int line = irq - IRQ_EP93XX_GPIO(0);
+ int line = irq_to_gpio(irq);
int port = line >> 3;
gpio_int_unmasked[port] &= ~(1 << (line & 7));
@@ -314,7 +348,7 @@
static void ep93xx_gpio_irq_unmask(unsigned int irq)
{
- int line = irq - IRQ_EP93XX_GPIO(0);
+ int line = irq_to_gpio(irq);
int port = line >> 3;
gpio_int_unmasked[port] |= 1 << (line & 7);
@@ -329,38 +363,54 @@
*/
static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
{
- int port;
- int line;
+ struct irq_desc *desc = irq_desc + irq;
+ const int gpio = irq_to_gpio(irq);
+ const int port = gpio >> 3;
+ const int port_mask = 1 << (gpio & 7);
- line = irq - IRQ_EP93XX_GPIO(0);
- if (line >= 0 && line < 16) {
- gpio_line_config(line, GPIO_IN);
- } else {
- gpio_line_config(EP93XX_GPIO_LINE_F(line-16), GPIO_IN);
+ ep93xx_gpio_set_direction(gpio, GPIO_IN);
+
+ switch (type) {
+ case IRQT_RISING:
+ gpio_int_type1[port] |= port_mask;
+ gpio_int_type2[port] |= port_mask;
+ desc->handle_irq = handle_edge_irq;
+ break;
+ case IRQT_FALLING:
+ gpio_int_type1[port] |= port_mask;
+ gpio_int_type2[port] &= ~port_mask;
+ desc->handle_irq = handle_edge_irq;
+ break;
+ case IRQT_HIGH:
+ gpio_int_type1[port] &= ~port_mask;
+ gpio_int_type2[port] |= port_mask;
+ desc->handle_irq = handle_level_irq;
+ break;
+ case IRQT_LOW:
+ gpio_int_type1[port] &= ~port_mask;
+ gpio_int_type2[port] &= ~port_mask;
+ desc->handle_irq = handle_level_irq;
+ break;
+ case IRQT_BOTHEDGE:
+ gpio_int_type1[port] |= port_mask;
+ /* set initial polarity based on current input level */
+ if (gpio_get_value(gpio))
+ gpio_int_type2[port] &= ~port_mask; /* falling */
+ else
+ gpio_int_type2[port] |= port_mask; /* rising */
+ desc->handle_irq = handle_edge_irq;
+ break;
+ default:
+ pr_err("ep93xx: failed to set irq type %d for gpio %d\n",
+ type, gpio);
+ return -EINVAL;
}
- port = line >> 3;
- line &= 7;
+ gpio_int_enabled[port] |= port_mask;
- if (type & IRQT_RISING) {
- gpio_int_enabled[port] |= 1 << line;
- gpio_int_type1[port] |= 1 << line;
- gpio_int_type2[port] |= 1 << line;
- } else if (type & IRQT_FALLING) {
- gpio_int_enabled[port] |= 1 << line;
- gpio_int_type1[port] |= 1 << line;
- gpio_int_type2[port] &= ~(1 << line);
- } else if (type & IRQT_HIGH) {
- gpio_int_enabled[port] |= 1 << line;
- gpio_int_type1[port] &= ~(1 << line);
- gpio_int_type2[port] |= 1 << line;
- } else if (type & IRQT_LOW) {
- gpio_int_enabled[port] |= 1 << line;
- gpio_int_type1[port] &= ~(1 << line);
- gpio_int_type2[port] &= ~(1 << line);
- } else {
- gpio_int_enabled[port] &= ~(1 << line);
- }
+ desc->status &= ~IRQ_TYPE_SENSE_MASK;
+ desc->status |= type & IRQ_TYPE_SENSE_MASK;
+
update_gpio_int_params(port);
return 0;
@@ -368,7 +418,8 @@
static struct irq_chip ep93xx_gpio_irq_chip = {
.name = "GPIO",
- .ack = ep93xx_gpio_irq_mask_ack,
+ .ack = ep93xx_gpio_irq_ack,
+ .mask_ack = ep93xx_gpio_irq_mask_ack,
.mask = ep93xx_gpio_irq_mask,
.unmask = ep93xx_gpio_irq_unmask,
.set_type = ep93xx_gpio_irq_type,
@@ -377,15 +428,16 @@
void __init ep93xx_init_irq(void)
{
- int irq;
+ int gpio_irq;
vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
- for (irq = IRQ_EP93XX_GPIO(0); irq <= IRQ_EP93XX_GPIO(23); irq++) {
- set_irq_chip(irq, &ep93xx_gpio_irq_chip);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
+ for (gpio_irq = gpio_to_irq(0);
+ gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
+ set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip);
+ set_irq_handler(gpio_irq, handle_level_irq);
+ set_irq_flags(gpio_irq, IRQF_VALID);
}
set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c
index 3a63941..b2a2118 100644
--- a/arch/arm/mach-footbridge/dc21285-timer.c
+++ b/arch/arm/mach-footbridge/dc21285-timer.c
@@ -30,14 +30,10 @@
static irqreturn_t
timer1_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
*CSR_TIMER1_CLR = 0;
timer_tick();
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c
index d08d641..a764e01 100644
--- a/arch/arm/mach-footbridge/isa-timer.c
+++ b/arch/arm/mach-footbridge/isa-timer.c
@@ -64,9 +64,7 @@
static irqreturn_t
isa_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
timer_tick();
- write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c
index 9107b8e..c2a431f 100644
--- a/arch/arm/mach-h720x/cpu-h7201.c
+++ b/arch/arm/mach-h720x/cpu-h7201.c
@@ -29,13 +29,9 @@
static irqreturn_t
h7201_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
CPU_REG (TIMER_VIRT, TIMER_TOPSTAT);
timer_tick();
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c
index 0a1a25f..c627fa1 100644
--- a/arch/arm/mach-h720x/cpu-h7202.c
+++ b/arch/arm/mach-h720x/cpu-h7202.c
@@ -113,9 +113,7 @@
mask = CPU_REG (TIMER_VIRT, TIMER_TOPSTAT);
if ( mask & TSTAT_T0INT ) {
- write_seqlock(&xtime_lock);
timer_tick();
- write_sequnlock(&xtime_lock);
if( mask == TSTAT_T0INT )
return;
}
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index e9c82de..7fbbc17 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -250,8 +250,6 @@
static irqreturn_t
integrator_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
/*
* clear the interrupt
*/
@@ -259,8 +257,6 @@
timer_tick();
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index d4d8134..d55fa4e 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -440,7 +440,7 @@
return 1;
}
-static irqreturn_t v3_irq(int irq, void *devid)
+static irqreturn_t v3_irq(int dummy, void *devid)
{
#ifdef CONFIG_DEBUG_LL
struct pt_regs *regs = get_irq_regs();
@@ -448,8 +448,10 @@
unsigned long instr = *(unsigned long *)pc;
char buf[128];
- sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n", irq,
- pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255,
+ sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
+ "ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,
+ __raw_readl(SC_LBFADDR),
+ __raw_readl(SC_LBFCODE) & 255,
v3_readb(V3_LB_ISTAT));
printascii(buf);
#endif
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 2b086ab..74c65ce 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -3,7 +3,7 @@
*
* Board support code for the GLAN Tank.
*
- * Copyright (C) 2006 Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2006, 2007 Martin Michlmayr <tbm@cyrius.com>
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
*
* This program is free software; you can redistribute it and/or modify it
@@ -21,6 +21,7 @@
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/io.h>
@@ -118,7 +119,7 @@
* GLAN Tank machine initialization.
*/
static struct physmap_flash_data glantank_flash_data = {
- .width = 1,
+ .width = 2,
};
static struct resource glantank_flash_resource = {
@@ -166,6 +167,13 @@
.resource = &glantank_uart_resource,
};
+static struct i2c_board_info __initdata glantank_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("rtc-rs5c372", 0x32),
+ .type = "rs5c372a",
+ },
+};
+
static void glantank_power_off(void)
{
__raw_writeb(0x01, 0xfe8d0004);
@@ -183,6 +191,9 @@
platform_device_register(&iop3xx_dma_0_channel);
platform_device_register(&iop3xx_dma_1_channel);
+ i2c_register_board_info(0, glantank_i2c_devices,
+ ARRAY_SIZE(glantank_i2c_devices));
+
pm_power_off = glantank_power_off;
}
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index cb6ad21..81cdc82 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -206,8 +206,6 @@
static int ixp2000_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
/* clear timer 1 */
ixp2000_reg_wrb(IXP2000_T1_CLR, 1);
@@ -217,8 +215,6 @@
next_jiffy_time -= ticks_per_jiffy;
}
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index 16356ff..5fea5a1 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -22,7 +22,6 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/bitops.h>
-#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/device.h>
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index 7a85ced..d3a779a 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -19,7 +19,6 @@
#include <linux/tty.h>
#include <linux/bitops.h>
#include <linux/ioport.h>
-#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/device.h>
@@ -40,7 +39,6 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
#include <asm/mach/pci.h>
static int __init espresso_pci_init(void)
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index c41a6b5..5c5d4d6 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -24,7 +24,6 @@
#include <linux/tty.h>
#include <linux/bitops.h>
#include <linux/ioport.h>
-#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/device.h>
@@ -44,7 +43,6 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
#include <asm/mach/pci.h>
/*
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index e356449..f0f70ba 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -23,7 +23,6 @@
#include <linux/tty.h>
#include <linux/bitops.h>
#include <linux/ioport.h>
-#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/device.h>
@@ -44,7 +43,6 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
#include <asm/mach/pci.h>
/*
diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c
index acd71e9..6f10dc2 100644
--- a/arch/arm/mach-ixp4xx/nslu2-power.c
+++ b/arch/arm/mach-ixp4xx/nslu2-power.c
@@ -21,7 +21,6 @@
#include <linux/reboot.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <linux/reboot.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index 2a07a28..730a3af 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -9,7 +9,7 @@
obj- :=
# PCI support is optional
-#obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_PCI) += pci.o
# Board-specific support
obj-$(CONFIG_MACH_KS8695) += board-micrel.o
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 2feeef8..05ac2bd 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -40,7 +40,7 @@
printk(KERN_INFO "Micrel KS8695 Development Board initializing\n");
#ifdef CONFIG_PCI
-// ks8695_init_pci(&micrel_pci);
+ ks8695_init_pci(&micrel_pci);
#endif
/* Add devices */
diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c
index b1aa3cb..5e46191 100644
--- a/arch/arm/mach-ks8695/gpio.c
+++ b/arch/arm/mach-ks8695/gpio.c
@@ -20,6 +20,8 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
#include <linux/module.h>
#include <asm/io.h>
@@ -216,3 +218,84 @@
return (irq - KS8695_IRQ_EXTERN0);
}
EXPORT_SYMBOL(irq_to_gpio);
+
+
+/* .... Debug interface ..................................................... */
+
+#ifdef CONFIG_DEBUG_FS
+
+static int ks8695_gpio_show(struct seq_file *s, void *unused)
+{
+ unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
+ unsigned int intmask[] = { IOPC_IOEINT0TM, IOPC_IOEINT1TM, IOPC_IOEINT2TM, IOPC_IOEINT3TM };
+ unsigned long mode, ctrl, data;
+ int i;
+
+ mode = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+ ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
+ data = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+
+ seq_printf(s, "Pin\tI/O\tFunction\tState\n\n");
+
+ for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) {
+ seq_printf(s, "%i:\t", i);
+
+ seq_printf(s, "%s\t", (mode & IOPM_(i)) ? "Output" : "Input");
+
+ if (i <= KS8695_GPIO_3) {
+ if (ctrl & enable[i]) {
+ seq_printf(s, "EXT%i ", i);
+
+ switch ((ctrl & intmask[i]) >> (4 * i)) {
+ case IOPC_TM_LOW:
+ seq_printf(s, "(Low)"); break;
+ case IOPC_TM_HIGH:
+ seq_printf(s, "(High)"); break;
+ case IOPC_TM_RISING:
+ seq_printf(s, "(Rising)"); break;
+ case IOPC_TM_FALLING:
+ seq_printf(s, "(Falling)"); break;
+ case IOPC_TM_EDGE:
+ seq_printf(s, "(Edges)"); break;
+ }
+ }
+ else
+ seq_printf(s, "GPIO\t");
+ }
+ else if (i <= KS8695_GPIO_5) {
+ if (ctrl & enable[i])
+ seq_printf(s, "TOUT%i\t", i - KS8695_GPIO_4);
+ else
+ seq_printf(s, "GPIO\t");
+ }
+ else
+ seq_printf(s, "GPIO\t");
+
+ seq_printf(s, "\t");
+
+ seq_printf(s, "%i\n", (data & IOPD_(i)) ? 1 : 0);
+ }
+ return 0;
+}
+
+static int ks8695_gpio_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ks8695_gpio_show, NULL);
+}
+
+static const struct file_operations ks8695_gpio_operations = {
+ .open = ks8695_gpio_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init ks8695_gpio_debugfs_init(void)
+{
+ /* /sys/kernel/debug/ks8695_gpio */
+ (void) debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL, &ks8695_gpio_operations);
+ return 0;
+}
+postcore_initcall(ks8695_gpio_debugfs_init);
+
+#endif
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
new file mode 100644
index 0000000..3f4e033
--- /dev/null
+++ b/arch/arm/mach-ks8695/pci.c
@@ -0,0 +1,326 @@
+/*
+ * arch/arm/mach-ks8695/pci.c
+ *
+ * Copyright (C) 2003, Micrel Semiconductors
+ * Copyright (C) 2006, Greg Ungerer <gerg@snapgear.com>
+ * Copyright (C) 2006, Ben Dooks
+ * Copyright (C) 2007, Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/signal.h>
+#include <asm/mach/pci.h>
+#include <asm/hardware.h>
+
+#include <asm/arch/devices.h>
+#include <asm/arch/regs-pci.h>
+
+
+static int pci_dbg;
+static int pci_cfg_dbg;
+
+
+static void ks8695_pci_setupconfig(unsigned int bus_nr, unsigned int devfn, unsigned int where)
+{
+ unsigned long pbca;
+
+ pbca = PBCA_ENABLE | (where & ~3);
+ pbca |= PCI_SLOT(devfn) << 11 ;
+ pbca |= PCI_FUNC(devfn) << 8;
+ pbca |= bus_nr << 16;
+
+ if (bus_nr == 0) {
+ /* use Type-0 transaction */
+ __raw_writel(pbca, KS8695_PCI_VA + KS8695_PBCA);
+ } else {
+ /* use Type-1 transaction */
+ __raw_writel(pbca | PBCA_TYPE1, KS8695_PCI_VA + KS8695_PBCA);
+ }
+}
+
+
+/*
+ * The KS8695 datasheet prohibits anything other than 32bit accesses
+ * to the IO registers, so all our configuration must be done with
+ * 32bit operations, and the correct bit masking and shifting.
+ */
+
+static int ks8695_pci_readconfig(struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 *value)
+{
+ ks8695_pci_setupconfig(bus->number, devfn, where);
+
+ *value = __raw_readl(KS8695_PCI_VA + KS8695_PBCD);
+
+ switch (size) {
+ case 4:
+ break;
+ case 2:
+ *value = *value >> ((where & 2) * 8);
+ *value &= 0xffff;
+ break;
+ case 1:
+ *value = *value >> ((where & 3) * 8);
+ *value &= 0xff;
+ break;
+ }
+
+ if (pci_cfg_dbg) {
+ printk("read: %d,%08x,%02x,%d: %08x (%08x)\n",
+ bus->number, devfn, where, size, *value,
+ __raw_readl(KS8695_PCI_VA + KS8695_PBCD));
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int ks8695_pci_writeconfig(struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 value)
+{
+ unsigned long tmp;
+
+ if (pci_cfg_dbg) {
+ printk("write: %d,%08x,%02x,%d: %08x\n",
+ bus->number, devfn, where, size, value);
+ }
+
+ ks8695_pci_setupconfig(bus->number, devfn, where);
+
+ switch (size) {
+ case 4:
+ __raw_writel(value, KS8695_PCI_VA + KS8695_PBCD);
+ break;
+ case 2:
+ tmp = __raw_readl(KS8695_PCI_VA + KS8695_PBCD);
+ tmp &= ~(0xffff << ((where & 2) * 8));
+ tmp |= value << ((where & 2) * 8);
+
+ __raw_writel(tmp, KS8695_PCI_VA + KS8695_PBCD);
+ break;
+ case 1:
+ tmp = __raw_readl(KS8695_PCI_VA + KS8695_PBCD);
+ tmp &= ~(0xff << ((where & 3) * 8));
+ tmp |= value << ((where & 3) * 8);
+
+ __raw_writel(tmp, KS8695_PCI_VA + KS8695_PBCD);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static void ks8695_local_writeconfig(int where, u32 value)
+{
+ ks8695_pci_setupconfig(0, 0, where);
+ __raw_writel(value, KS8695_PCI_VA + KS8695_PBCD);
+}
+
+static struct pci_ops ks8695_pci_ops = {
+ .read = ks8695_pci_readconfig,
+ .write = ks8695_pci_writeconfig,
+};
+
+static struct pci_bus *ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys)
+{
+ return pci_scan_bus(sys->busnr, &ks8695_pci_ops, sys);
+}
+
+static struct resource pci_mem = {
+ .name = "PCI Memory space",
+ .start = KS8695_PCIMEM_PA,
+ .end = KS8695_PCIMEM_PA + (KS8695_PCIMEM_SIZE - 1),
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource pci_io = {
+ .name = "PCI IO space",
+ .start = KS8695_PCIIO_PA,
+ .end = KS8695_PCIIO_PA + (KS8695_PCIIO_SIZE - 1),
+ .flags = IORESOURCE_IO,
+};
+
+static int __init ks8695_pci_setup(int nr, struct pci_sys_data *sys)
+{
+ if (nr > 0)
+ return 0;
+
+ request_resource(&iomem_resource, &pci_mem);
+ request_resource(&ioport_resource, &pci_io);
+
+ sys->resource[0] = &pci_io;
+ sys->resource[1] = &pci_mem;
+ sys->resource[2] = NULL;
+
+ /* Assign and enable processor bridge */
+ ks8695_local_writeconfig(PCI_BASE_ADDRESS_0, KS8695_PCIMEM_PA);
+
+ /* Enable bus-master & Memory Space access */
+ ks8695_local_writeconfig(PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+
+ /* Set cache-line size & latency. */
+ ks8695_local_writeconfig(PCI_CACHE_LINE_SIZE, (32 << 8) | (L1_CACHE_BYTES / sizeof(u32)));
+
+ /* Reserve PCI memory space for PCI-AHB resources */
+ if (!request_mem_region(KS8695_PCIMEM_PA, SZ_64M, "PCI-AHB Bridge")) {
+ printk(KERN_ERR "Cannot allocate PCI-AHB Bridge memory.\n");
+ return -EBUSY;
+ }
+
+ return 1;
+}
+
+static inline unsigned int size_mask(unsigned long size)
+{
+ return (~size) + 1;
+}
+
+static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ unsigned long pc = instruction_pointer(regs);
+ unsigned long instr = *(unsigned long *)pc;
+ unsigned long cmdstat;
+
+ cmdstat = __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS);
+
+ printk(KERN_ERR "PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx [%s%s%s%s%s]\n",
+ addr, fsr, regs->ARM_pc, regs->ARM_lr,
+ cmdstat & (PCI_STATUS_SIG_TARGET_ABORT << 16) ? "GenTarget" : " ",
+ cmdstat & (PCI_STATUS_REC_TARGET_ABORT << 16) ? "RecvTarget" : " ",
+ cmdstat & (PCI_STATUS_REC_MASTER_ABORT << 16) ? "MasterAbort" : " ",
+ cmdstat & (PCI_STATUS_SIG_SYSTEM_ERROR << 16) ? "SysError" : " ",
+ cmdstat & (PCI_STATUS_DETECTED_PARITY << 16) ? "Parity" : " "
+ );
+
+ __raw_writel(cmdstat, KS8695_PCI_VA + KS8695_CRCFCS);
+
+ /*
+ * If the instruction being executed was a read,
+ * make it look like it read all-ones.
+ */
+ if ((instr & 0x0c100000) == 0x04100000) {
+ int reg = (instr >> 12) & 15;
+ unsigned long val;
+
+ if (instr & 0x00400000)
+ val = 255;
+ else
+ val = -1;
+
+ regs->uregs[reg] = val;
+ regs->ARM_pc += 4;
+ return 0;
+ }
+
+ if ((instr & 0x0e100090) == 0x00100090) {
+ int reg = (instr >> 12) & 15;
+
+ regs->uregs[reg] = -1;
+ regs->ARM_pc += 4;
+ return 0;
+ }
+
+ return 1;
+}
+
+static void __init ks8695_pci_preinit(void)
+{
+ /* stage 1 initialization, subid, subdevice = 0x0001 */
+ __raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID);
+
+ /* stage 2 initialization */
+ /* prefetch limits with 16 words, retry enable */
+ __raw_writel(0x40000000, KS8695_PCI_VA + KS8695_PBCS);
+
+ /* configure memory mapping */
+ __raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBA);
+ __raw_writel(size_mask(KS8695_PCIMEM_SIZE), KS8695_PCI_VA + KS8695_PMBAM);
+ __raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBAT);
+ __raw_writel(0, KS8695_PCI_VA + KS8695_PMBAC);
+
+ /* configure IO mapping */
+ __raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBA);
+ __raw_writel(size_mask(KS8695_PCIIO_SIZE), KS8695_PCI_VA + KS8695_PIOBAM);
+ __raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBAT);
+ __raw_writel(0, KS8695_PCI_VA + KS8695_PIOBAC);
+
+ /* hook in fault handlers */
+ hook_fault_code(8, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch");
+ hook_fault_code(10, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch");
+}
+
+static void ks8695_show_pciregs(void)
+{
+ if (!pci_dbg)
+ return;
+
+ printk(KERN_INFO "PCI: CRCFID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFID));
+ printk(KERN_INFO "PCI: CRCFCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS));
+ printk(KERN_INFO "PCI: CRCFRV = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFRV));
+ printk(KERN_INFO "PCI: CRCFLT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFLT));
+ printk(KERN_INFO "PCI: CRCBMA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCBMA));
+ printk(KERN_INFO "PCI: CRCSID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCSID));
+ printk(KERN_INFO "PCI: CRCFIT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFIT));
+
+ printk(KERN_INFO "PCI: PBM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBM));
+ printk(KERN_INFO "PCI: PBCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBCS));
+
+ printk(KERN_INFO "PCI: PMBA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBA));
+ printk(KERN_INFO "PCI: PMBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAC));
+ printk(KERN_INFO "PCI: PMBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAM));
+ printk(KERN_INFO "PCI: PMBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAT));
+
+ printk(KERN_INFO "PCI: PIOBA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBA));
+ printk(KERN_INFO "PCI: PIOBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAC));
+ printk(KERN_INFO "PCI: PIOBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAM));
+ printk(KERN_INFO "PCI: PIOBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAT));
+}
+
+
+static struct hw_pci ks8695_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = ks8695_pci_preinit,
+ .setup = ks8695_pci_setup,
+ .scan = ks8695_pci_scan_bus,
+ .postinit = NULL,
+ .swizzle = pci_std_swizzle,
+ .map_irq = NULL,
+};
+
+void __init ks8695_init_pci(struct ks8695_pci_cfg *cfg)
+{
+ if (__raw_readl(KS8695_PCI_VA + KS8695_CRCFRV) & CFRV_GUEST) {
+ printk("PCI: KS8695 in guest mode, not initialising\n");
+ return;
+ }
+
+ printk(KERN_INFO "PCI: Initialising\n");
+ ks8695_show_pciregs();
+
+ /* set Mode */
+ __raw_writel(cfg->mode << 29, KS8695_PCI_VA + KS8695_PBM);
+
+ ks8695_pci.map_irq = cfg->map_irq; /* board-specific map_irq method */
+
+ pci_common_init(&ks8695_pci);
+}
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index d2c86e4..02f766b 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -70,10 +70,7 @@
*/
static irqreturn_t ks8695_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
timer_tick();
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-lh7a40x/time.c b/arch/arm/mach-lh7a40x/time.c
index c25316d..e50e60b 100644
--- a/arch/arm/mach-lh7a40x/time.c
+++ b/arch/arm/mach-lh7a40x/time.c
@@ -41,13 +41,9 @@
static irqreturn_t
lh7a40x_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
TIMER_EOI = 0;
timer_tick();
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
new file mode 100644
index 0000000..3553bab
--- /dev/null
+++ b/arch/arm/mach-msm/Kconfig
@@ -0,0 +1,18 @@
+if ARCH_MSM7X00A
+
+comment "MSM7X00A Board Type"
+ depends on ARCH_MSM7X00A
+
+config MACH_HALIBUT
+ depends on ARCH_MSM7X00A
+ default y
+ bool "Halibut Board (QCT SURF7200A)"
+ help
+ Support for the Qualcomm SURF7200A eval board.
+
+config MSM7X00A_IDLE
+ depends on ARCH_MSM7X00A
+ default y
+ bool "Idle Support for MSM7X00A"
+
+endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
new file mode 100644
index 0000000..d12f236
--- /dev/null
+++ b/arch/arm/mach-msm/Makefile
@@ -0,0 +1,7 @@
+obj-y += io.o idle.o irq.o timer.o dma.o
+
+# Common code for board init
+obj-y += common.o
+
+obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o
+
diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot
new file mode 100644
index 0000000..24dfbf8
--- /dev/null
+++ b/arch/arm/mach-msm/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x10008000
+params_phys-y := 0x10000100
+initrd_phys-y := 0x10800000
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
new file mode 100644
index 0000000..86dfb2b
--- /dev/null
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -0,0 +1,114 @@
+/* linux/arch/arm/mach-msm/board-halibut.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/msm_iomap.h>
+
+#include <asm/io.h>
+#include <asm/delay.h>
+
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = 0x9C004300,
+ .end = 0x9C004400,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSM_GPIO_TO_INT(49),
+ .end = MSM_GPIO_TO_INT(49),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static void mddi0_panel_power(int on)
+{
+}
+
+static struct msm_mddi_platform_data msm_mddi0_pdata = {
+ .panel_power = mddi0_panel_power,
+ .has_vsync_irq = 0,
+};
+
+static struct platform_device msm_mddi0_device = {
+ .name = "msm_mddi",
+ .id = 0,
+ .dev = {
+ .platform_data = &msm_mddi0_pdata
+ },
+};
+
+static struct platform_device msm_serial0_device = {
+ .name = "msm_serial",
+ .id = 0,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &msm_serial0_device,
+ &msm_mddi0_device,
+ &smc91x_device,
+};
+
+extern struct sys_timer msm_timer;
+
+static void __init halibut_init_irq(void)
+{
+ msm_init_irq();
+}
+
+static void __init halibut_init(void)
+{
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ msm_add_devices();
+}
+
+static void __init halibut_map_io(void)
+{
+ msm_map_common_io();
+}
+
+MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
+
+/* UART for LL DEBUG */
+ .phys_io = MSM_UART1_PHYS,
+ .io_pg_offst = ((MSM_UART1_BASE) >> 18) & 0xfffc,
+
+ .boot_params = 0x10000100,
+ .map_io = halibut_map_io,
+ .init_irq = halibut_init_irq,
+ .init_machine = halibut_init,
+ .timer = &msm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-msm/common.c b/arch/arm/mach-msm/common.c
new file mode 100644
index 0000000..3f5d336
--- /dev/null
+++ b/arch/arm/mach-msm/common.c
@@ -0,0 +1,116 @@
+/* linux/arch/arm/mach-msm/common.c
+ *
+ * Common setup code for MSM7K Boards
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/flash.h>
+#include <asm/io.h>
+
+#include <asm/setup.h>
+
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/arch/msm_iomap.h>
+
+#include <asm/arch/board.h>
+
+struct flash_platform_data msm_nand_data = {
+ .parts = 0,
+ .nr_parts = 0,
+};
+
+static struct resource msm_nand_resources[] = {
+ [0] = {
+ .start = 7,
+ .end = 7,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device msm_nand_device = {
+ .name = "msm_nand",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(msm_nand_resources),
+ .resource = msm_nand_resources,
+ .dev = {
+ .platform_data = &msm_nand_data,
+ },
+};
+
+static struct platform_device msm_smd_device = {
+ .name = "msm_smd",
+ .id = -1,
+};
+
+static struct resource msm_i2c_resources[] = {
+ {
+ .start = MSM_I2C_BASE,
+ .end = MSM_I2C_BASE + MSM_I2C_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_PWB_I2C,
+ .end = INT_PWB_I2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device msm_i2c_device = {
+ .name = "msm_i2c",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(msm_i2c_resources),
+ .resource = msm_i2c_resources,
+};
+
+static struct resource usb_resources[] = {
+ {
+ .start = MSM_HSUSB_PHYS,
+ .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_USB_HS,
+ .end = INT_USB_HS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device msm_hsusb_device = {
+ .name = "msm_hsusb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(usb_resources),
+ .resource = usb_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+static struct platform_device *devices[] __initdata = {
+ &msm_nand_device,
+ &msm_smd_device,
+ &msm_i2c_device,
+ &msm_hsusb_device,
+};
+
+void __init msm_add_devices(void)
+{
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
new file mode 100644
index 0000000..8b0f339
--- /dev/null
+++ b/arch/arm/mach-msm/dma.c
@@ -0,0 +1,214 @@
+/* linux/arch/arm/mach-msm/dma.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm/io.h>
+#include <linux/interrupt.h>
+#include <asm/arch/dma.h>
+
+#define MSM_DMOV_CHANNEL_COUNT 16
+
+enum {
+ MSM_DMOV_PRINT_ERRORS = 1,
+ MSM_DMOV_PRINT_IO = 2,
+ MSM_DMOV_PRINT_FLOW = 4
+};
+
+static DEFINE_SPINLOCK(msm_dmov_lock);
+static struct msm_dmov_cmd active_command;
+static struct list_head ready_commands[MSM_DMOV_CHANNEL_COUNT];
+static struct list_head active_commands[MSM_DMOV_CHANNEL_COUNT];
+unsigned int msm_dmov_print_mask = MSM_DMOV_PRINT_ERRORS;
+
+#define MSM_DMOV_DPRINTF(mask, format, args...) \
+ do { \
+ if ((mask) & msm_dmov_print_mask) \
+ printk(KERN_ERR format, args); \
+ } while (0)
+#define PRINT_ERROR(format, args...) \
+ MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_ERRORS, format, args);
+#define PRINT_IO(format, args...) \
+ MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_IO, format, args);
+#define PRINT_FLOW(format, args...) \
+ MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_FLOW, format, args);
+
+void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
+{
+ unsigned long irq_flags;
+ unsigned int status;
+
+ spin_lock_irqsave(&msm_dmov_lock, irq_flags);
+ status = readl(DMOV_STATUS(id));
+ if (list_empty(&ready_commands[id]) &&
+ (status & DMOV_STATUS_CMD_PTR_RDY)) {
+#if 0
+ if (list_empty(&active_commands[id])) {
+ PRINT_FLOW("msm_dmov_enqueue_cmd(%d), enable interrupt\n", id);
+ writel(DMOV_CONFIG_IRQ_EN, DMOV_CONFIG(id));
+ }
+#endif
+ PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status);
+ list_add_tail(&cmd->list, &active_commands[id]);
+ writel(cmd->cmdptr, DMOV_CMD_PTR(id));
+ } else {
+ if (list_empty(&active_commands[id]))
+ PRINT_ERROR("msm_dmov_enqueue_cmd(%d), error datamover stalled, status %x\n", id, status);
+
+ PRINT_IO("msm_dmov_enqueue_cmd(%d), enqueue command, status %x\n", id, status);
+ list_add_tail(&cmd->list, &ready_commands[id]);
+ }
+ spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
+}
+
+struct msm_dmov_exec_cmdptr_cmd {
+ struct msm_dmov_cmd dmov_cmd;
+ struct completion complete;
+ unsigned id;
+ unsigned int result;
+ unsigned int flush[6];
+};
+
+static void dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd, unsigned int result)
+{
+ struct msm_dmov_exec_cmdptr_cmd *cmd = container_of(_cmd, struct msm_dmov_exec_cmdptr_cmd, dmov_cmd);
+ cmd->result = result;
+ if (result != 0x80000002) {
+ cmd->flush[0] = readl(DMOV_FLUSH0(cmd->id));
+ cmd->flush[1] = readl(DMOV_FLUSH1(cmd->id));
+ cmd->flush[2] = readl(DMOV_FLUSH2(cmd->id));
+ cmd->flush[3] = readl(DMOV_FLUSH3(cmd->id));
+ cmd->flush[4] = readl(DMOV_FLUSH4(cmd->id));
+ cmd->flush[5] = readl(DMOV_FLUSH5(cmd->id));
+ }
+ complete(&cmd->complete);
+}
+
+int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr)
+{
+ struct msm_dmov_exec_cmdptr_cmd cmd;
+
+ PRINT_FLOW("dmov_exec_cmdptr(%d, %x)\n", id, cmdptr);
+
+ cmd.dmov_cmd.cmdptr = cmdptr;
+ cmd.dmov_cmd.complete_func = dmov_exec_cmdptr_complete_func;
+ cmd.id = id;
+ init_completion(&cmd.complete);
+
+ msm_dmov_enqueue_cmd(id, &cmd.dmov_cmd);
+ wait_for_completion(&cmd.complete);
+
+ if (cmd.result != 0x80000002) {
+ PRINT_ERROR("dmov_exec_cmdptr(%d): ERROR, result: %x\n", id, cmd.result);
+ PRINT_ERROR("dmov_exec_cmdptr(%d): flush: %x %x %x %x\n",
+ id, cmd.flush[0], cmd.flush[1], cmd.flush[2], cmd.flush[3]);
+ return -EIO;
+ }
+ PRINT_FLOW("dmov_exec_cmdptr(%d, %x) done\n", id, cmdptr);
+ return 0;
+}
+
+
+static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id)
+{
+ unsigned int int_status, mask, id;
+ unsigned long irq_flags;
+ unsigned int ch_status;
+ unsigned int ch_result;
+ struct msm_dmov_cmd *cmd;
+
+ spin_lock_irqsave(&msm_dmov_lock, irq_flags);
+
+ int_status = readl(DMOV_ISR); /* read and clear interrupt */
+ PRINT_FLOW("msm_datamover_irq_handler: DMOV_ISR %x\n", int_status);
+
+ while (int_status) {
+ mask = int_status & -int_status;
+ id = fls(mask) - 1;
+ PRINT_FLOW("msm_datamover_irq_handler %08x %08x id %d\n", int_status, mask, id);
+ int_status &= ~mask;
+ ch_status = readl(DMOV_STATUS(id));
+ if (!(ch_status & DMOV_STATUS_RSLT_VALID)) {
+ PRINT_FLOW("msm_datamover_irq_handler id %d, result not valid %x\n", id, ch_status);
+ continue;
+ }
+ do {
+ ch_result = readl(DMOV_RSLT(id));
+ if (list_empty(&active_commands[id])) {
+ PRINT_ERROR("msm_datamover_irq_handler id %d, got result "
+ "with no active command, status %x, result %x\n",
+ id, ch_status, ch_result);
+ cmd = NULL;
+ } else
+ cmd = list_entry(active_commands[id].next, typeof(*cmd), list);
+ PRINT_FLOW("msm_datamover_irq_handler id %d, status %x, result %x\n", id, ch_status, ch_result);
+ if (ch_result & DMOV_RSLT_DONE) {
+ PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n",
+ id, ch_status);
+ PRINT_IO("msm_datamover_irq_handler id %d, got result "
+ "for %p, result %x\n", id, cmd, ch_result);
+ if (cmd) {
+ list_del(&cmd->list);
+ cmd->complete_func(cmd, ch_result);
+ }
+ }
+ if (ch_result & DMOV_RSLT_FLUSH) {
+ unsigned int flush0 = readl(DMOV_FLUSH0(id));
+ PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
+ PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, flush0);
+ if (cmd) {
+ list_del(&cmd->list);
+ cmd->complete_func(cmd, ch_result);
+ }
+ }
+ if (ch_result & DMOV_RSLT_ERROR) {
+ unsigned int flush0 = readl(DMOV_FLUSH0(id));
+ PRINT_ERROR("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
+ PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, flush0);
+ if (cmd) {
+ list_del(&cmd->list);
+ cmd->complete_func(cmd, ch_result);
+ }
+ /* this does not seem to work, once we get an error */
+ /* the datamover will no longer accept commands */
+ writel(0, DMOV_FLUSH0(id));
+ }
+ ch_status = readl(DMOV_STATUS(id));
+ PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
+ if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) {
+ cmd = list_entry(ready_commands[id].next, typeof(*cmd), list);
+ list_del(&cmd->list);
+ list_add_tail(&cmd->list, &active_commands[id]);
+ PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id);
+ writel(cmd->cmdptr, DMOV_CMD_PTR(id));
+ }
+ } while (ch_status & DMOV_STATUS_RSLT_VALID);
+ PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
+ }
+ spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
+ return IRQ_HANDLED;
+}
+
+static int __init msm_init_datamover(void)
+{
+ int i;
+ for (i = 0; i < MSM_DMOV_CHANNEL_COUNT; i++) {
+ INIT_LIST_HEAD(&ready_commands[i]);
+ INIT_LIST_HEAD(&active_commands[i]);
+ writel(DMOV_CONFIG_IRQ_EN | DMOV_CONFIG_FORCE_TOP_PTR_RSLT | DMOV_CONFIG_FORCE_FLUSH_RSLT, DMOV_CONFIG(i));
+ }
+ return request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL);
+}
+
+arch_initcall(msm_init_datamover);
+
diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S
new file mode 100644
index 0000000..2b1cb7f
--- /dev/null
+++ b/arch/arm/mach-msm/idle.S
@@ -0,0 +1,36 @@
+/* linux/include/asm-arm/arch-msm/idle.S
+ *
+ * Idle processing for MSM7K - work around bugs with SWFI.
+ *
+ * Copyright (c) 2007 QUALCOMM Incorporated.
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+ENTRY(arch_idle)
+#ifdef CONFIG_MSM7X00A_IDLE
+ mrc p15, 0, r1, c1, c0, 0 /* read current CR */
+ bic r0, r1, #(1 << 2) /* clear dcache bit */
+ bic r0, r0, #(1 << 12) /* clear icache bit */
+ mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */
+
+ mov r0, #0 /* prepare wfi value */
+ mcr p15, 0, r0, c7, c10, 0 /* flush the cache */
+ mcr p15, 0, r0, c7, c10, 4 /* memory barrier */
+ mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */
+
+ mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */
+#endif
+ mov pc, lr
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
new file mode 100644
index 0000000..c39edb9
--- /dev/null
+++ b/arch/arm/mach-msm/io.c
@@ -0,0 +1,85 @@
+/* arch/arm/mach-msm/io.c
+ *
+ * MSM7K io support
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/arch/msm_iomap.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/board.h>
+
+#define MSM_DEVICE(name) { \
+ .virtual = MSM_##name##_BASE, \
+ .pfn = __phys_to_pfn(MSM_##name##_PHYS), \
+ .length = MSM_##name##_SIZE, \
+ .type = MT_DEVICE_NONSHARED, \
+ }
+
+static struct map_desc msm_io_desc[] __initdata = {
+ MSM_DEVICE(VIC),
+ MSM_DEVICE(CSR),
+ MSM_DEVICE(GPT),
+ MSM_DEVICE(DMOV),
+ MSM_DEVICE(UART1),
+ MSM_DEVICE(UART2),
+ MSM_DEVICE(UART3),
+ MSM_DEVICE(I2C),
+ MSM_DEVICE(GPIO1),
+ MSM_DEVICE(GPIO2),
+ MSM_DEVICE(HSUSB),
+ MSM_DEVICE(CLK_CTL),
+ MSM_DEVICE(PMDH),
+ MSM_DEVICE(EMDH),
+ MSM_DEVICE(MDP),
+ {
+ .virtual = MSM_SHARED_RAM_BASE,
+ .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
+ .length = MSM_SHARED_RAM_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init msm_map_common_io(void)
+{
+ /* Make sure the peripheral register window is closed, since
+ * we will use PTE flags (TEX[1]=1,B=0,C=1) to determine which
+ * pages are peripheral interface or not.
+ */
+ asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0));
+
+ iotable_init(msm_io_desc, ARRAY_SIZE(msm_io_desc));
+}
+
+void __iomem *
+__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
+{
+ if (mtype == MT_DEVICE) {
+ /* The peripherals in the 88000000 - D0000000 range
+ * are only accessable by type MT_DEVICE_NONSHARED.
+ * Adjust mtype as necessary to make this "just work."
+ */
+ if ((phys_addr >= 0x88000000) && (phys_addr < 0xD0000000))
+ mtype = MT_DEVICE_NONSHARED;
+ }
+
+ return __arm_ioremap(phys_addr, size, mtype);
+}
diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c
new file mode 100644
index 0000000..2415804
--- /dev/null
+++ b/arch/arm/mach-msm/irq.c
@@ -0,0 +1,154 @@
+/* linux/arch/arm/mach-msm/irq.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/timer.h>
+
+#include <linux/irq.h>
+#include <asm/hardware.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/msm_iomap.h>
+
+#define VIC_REG(off) (MSM_VIC_BASE + (off))
+
+#define VIC_INT_SELECT0 VIC_REG(0x0000) /* 1: FIQ, 0: IRQ */
+#define VIC_INT_SELECT1 VIC_REG(0x0004) /* 1: FIQ, 0: IRQ */
+#define VIC_INT_EN0 VIC_REG(0x0010)
+#define VIC_INT_EN1 VIC_REG(0x0014)
+#define VIC_INT_ENCLEAR0 VIC_REG(0x0020)
+#define VIC_INT_ENCLEAR1 VIC_REG(0x0024)
+#define VIC_INT_ENSET0 VIC_REG(0x0030)
+#define VIC_INT_ENSET1 VIC_REG(0x0034)
+#define VIC_INT_TYPE0 VIC_REG(0x0040) /* 1: EDGE, 0: LEVEL */
+#define VIC_INT_TYPE1 VIC_REG(0x0044) /* 1: EDGE, 0: LEVEL */
+#define VIC_INT_POLARITY0 VIC_REG(0x0050) /* 1: NEG, 0: POS */
+#define VIC_INT_POLARITY1 VIC_REG(0x0054) /* 1: NEG, 0: POS */
+#define VIC_NO_PEND_VAL VIC_REG(0x0060)
+#define VIC_INT_MASTEREN VIC_REG(0x0064) /* 1: IRQ, 2: FIQ */
+#define VIC_PROTECTION VIC_REG(0x006C) /* 1: ENABLE */
+#define VIC_CONFIG VIC_REG(0x0068) /* 1: USE ARM1136 VIC */
+#define VIC_IRQ_STATUS0 VIC_REG(0x0080)
+#define VIC_IRQ_STATUS1 VIC_REG(0x0084)
+#define VIC_FIQ_STATUS0 VIC_REG(0x0090)
+#define VIC_FIQ_STATUS1 VIC_REG(0x0094)
+#define VIC_RAW_STATUS0 VIC_REG(0x00A0)
+#define VIC_RAW_STATUS1 VIC_REG(0x00A4)
+#define VIC_INT_CLEAR0 VIC_REG(0x00B0)
+#define VIC_INT_CLEAR1 VIC_REG(0x00B4)
+#define VIC_SOFTINT0 VIC_REG(0x00C0)
+#define VIC_SOFTINT1 VIC_REG(0x00C4)
+#define VIC_IRQ_VEC_RD VIC_REG(0x00D0) /* pending int # */
+#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4) /* pending vector addr */
+#define VIC_IRQ_VEC_WR VIC_REG(0x00D8)
+#define VIC_IRQ_IN_SERVICE VIC_REG(0x00E0)
+#define VIC_IRQ_IN_STACK VIC_REG(0x00E4)
+#define VIC_TEST_BUS_SEL VIC_REG(0x00E8)
+
+#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4))
+#define VIC_VECTADDR(n) VIC_REG(0x0400+((n) * 4))
+
+static void msm_irq_ack(unsigned int irq)
+{
+ unsigned reg = VIC_INT_CLEAR0 + ((irq & 32) ? 4 : 0);
+ irq = 1 << (irq & 31);
+ writel(irq, reg);
+}
+
+static void msm_irq_mask(unsigned int irq)
+{
+ unsigned reg = VIC_INT_ENCLEAR0 + ((irq & 32) ? 4 : 0);
+ writel(1 << (irq & 31), reg);
+}
+
+static void msm_irq_unmask(unsigned int irq)
+{
+ unsigned reg = VIC_INT_ENSET0 + ((irq & 32) ? 4 : 0);
+ writel(1 << (irq & 31), reg);
+}
+
+static int msm_irq_set_wake(unsigned int irq, unsigned int on)
+{
+ return -EINVAL;
+}
+
+static int msm_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+ unsigned treg = VIC_INT_TYPE0 + ((irq & 32) ? 4 : 0);
+ unsigned preg = VIC_INT_POLARITY0 + ((irq & 32) ? 4 : 0);
+ int b = 1 << (irq & 31);
+
+ if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
+ writel(readl(preg) | b, preg);
+ if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH))
+ writel(readl(preg) & (~b), preg);
+
+ if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
+ writel(readl(treg) | b, treg);
+ set_irq_handler(irq, handle_edge_irq);
+ }
+ if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) {
+ writel(readl(treg) & (~b), treg);
+ set_irq_handler(irq, handle_level_irq);
+ }
+ return 0;
+}
+
+static struct irq_chip msm_irq_chip = {
+ .name = "msm",
+ .ack = msm_irq_ack,
+ .mask = msm_irq_mask,
+ .unmask = msm_irq_unmask,
+ .set_wake = msm_irq_set_wake,
+ .set_type = msm_irq_set_type,
+};
+
+void __init msm_init_irq(void)
+{
+ unsigned n;
+
+ /* select level interrupts */
+ writel(0, VIC_INT_TYPE0);
+ writel(0, VIC_INT_TYPE1);
+
+ /* select highlevel interrupts */
+ writel(0, VIC_INT_POLARITY0);
+ writel(0, VIC_INT_POLARITY1);
+
+ /* select IRQ for all INTs */
+ writel(0, VIC_INT_SELECT0);
+ writel(0, VIC_INT_SELECT1);
+
+ /* disable all INTs */
+ writel(0, VIC_INT_EN0);
+ writel(0, VIC_INT_EN1);
+
+ /* don't use 1136 vic */
+ writel(0, VIC_CONFIG);
+
+ /* enable interrupt controller */
+ writel(1, VIC_INT_MASTEREN);
+
+ for (n = 0; n < NR_MSM_IRQS; n++) {
+ set_irq_chip(n, &msm_irq_chip);
+ set_irq_handler(n, handle_level_irq);
+ set_irq_flags(n, IRQF_VALID);
+ }
+}
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
new file mode 100644
index 0000000..bd4732d
--- /dev/null
+++ b/arch/arm/mach-msm/timer.c
@@ -0,0 +1,205 @@
+/* linux/arch/arm/mach-msm/timer.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+
+#include <asm/mach/time.h>
+#include <asm/arch/msm_iomap.h>
+
+#include <asm/io.h>
+
+#define MSM_DGT_BASE (MSM_GPT_BASE + 0x10)
+#define MSM_DGT_SHIFT (5)
+
+#define TIMER_MATCH_VAL 0x0000
+#define TIMER_COUNT_VAL 0x0004
+#define TIMER_ENABLE 0x0008
+#define TIMER_ENABLE_CLR_ON_MATCH_EN 2
+#define TIMER_ENABLE_EN 1
+#define TIMER_CLEAR 0x000C
+
+#define CSR_PROTECTION 0x0020
+#define CSR_PROTECTION_EN 1
+
+#define GPT_HZ 32768
+#define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */
+
+struct msm_clock {
+ struct clock_event_device clockevent;
+ struct clocksource clocksource;
+ struct irqaction irq;
+ uint32_t regbase;
+ uint32_t freq;
+ uint32_t shift;
+};
+
+static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static cycle_t msm_gpt_read(void)
+{
+ return readl(MSM_GPT_BASE + TIMER_COUNT_VAL);
+}
+
+static cycle_t msm_dgt_read(void)
+{
+ return readl(MSM_DGT_BASE + TIMER_COUNT_VAL) >> MSM_DGT_SHIFT;
+}
+
+static int msm_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ struct msm_clock *clock = container_of(evt, struct msm_clock, clockevent);
+ uint32_t now = readl(clock->regbase + TIMER_COUNT_VAL);
+ uint32_t alarm = now + (cycles << clock->shift);
+ int late;
+
+ writel(alarm, clock->regbase + TIMER_MATCH_VAL);
+ now = readl(clock->regbase + TIMER_COUNT_VAL);
+ late = now - alarm;
+ if (late >= (-2 << clock->shift) && late < DGT_HZ*5) {
+ printk(KERN_NOTICE "msm_timer_set_next_event(%lu) clock %s, "
+ "alarm already expired, now %x, alarm %x, late %d\n",
+ cycles, clock->clockevent.name, now, alarm, late);
+ return -ETIME;
+ }
+ return 0;
+}
+
+static void msm_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ struct msm_clock *clock = container_of(evt, struct msm_clock, clockevent);
+ switch (mode) {
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ writel(TIMER_ENABLE_EN, clock->regbase + TIMER_ENABLE);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ writel(0, clock->regbase + TIMER_ENABLE);
+ break;
+ }
+}
+
+static struct msm_clock msm_clocks[] = {
+ {
+ .clockevent = {
+ .name = "gp_timer",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .rating = 200,
+ .set_next_event = msm_timer_set_next_event,
+ .set_mode = msm_timer_set_mode,
+ },
+ .clocksource = {
+ .name = "gp_timer",
+ .rating = 200,
+ .read = msm_gpt_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 24,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ },
+ .irq = {
+ .name = "gp_timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
+ .handler = msm_timer_interrupt,
+ .dev_id = &msm_clocks[0].clockevent,
+ .irq = INT_GP_TIMER_EXP
+ },
+ .regbase = MSM_GPT_BASE,
+ .freq = GPT_HZ
+ },
+ {
+ .clockevent = {
+ .name = "dg_timer",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32 + MSM_DGT_SHIFT,
+ .rating = 300,
+ .set_next_event = msm_timer_set_next_event,
+ .set_mode = msm_timer_set_mode,
+ },
+ .clocksource = {
+ .name = "dg_timer",
+ .rating = 300,
+ .read = msm_dgt_read,
+ .mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)),
+ .shift = 24 - MSM_DGT_SHIFT,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ },
+ .irq = {
+ .name = "dg_timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
+ .handler = msm_timer_interrupt,
+ .dev_id = &msm_clocks[1].clockevent,
+ .irq = INT_DEBUG_TIMER_EXP
+ },
+ .regbase = MSM_DGT_BASE,
+ .freq = DGT_HZ >> MSM_DGT_SHIFT,
+ .shift = MSM_DGT_SHIFT
+ }
+};
+
+static void __init msm_timer_init(void)
+{
+ int i;
+ int res;
+
+ for (i = 0; i < ARRAY_SIZE(msm_clocks); i++) {
+ struct msm_clock *clock = &msm_clocks[i];
+ struct clock_event_device *ce = &clock->clockevent;
+ struct clocksource *cs = &clock->clocksource;
+ writel(0, clock->regbase + TIMER_ENABLE);
+ writel(0, clock->regbase + TIMER_CLEAR);
+ writel(~0, clock->regbase + TIMER_MATCH_VAL);
+
+ ce->mult = div_sc(clock->freq, NSEC_PER_SEC, ce->shift);
+ /* allow at least 10 seconds to notice that the timer wrapped */
+ ce->max_delta_ns =
+ clockevent_delta2ns(0xf0000000 >> clock->shift, ce);
+ /* 4 gets rounded down to 3 */
+ ce->min_delta_ns = clockevent_delta2ns(4, ce);
+ ce->cpumask = cpumask_of_cpu(0);
+
+ cs->mult = clocksource_hz2mult(clock->freq, cs->shift);
+ res = clocksource_register(cs);
+ if (res)
+ printk(KERN_ERR "msm_timer_init: clocksource_register "
+ "failed for %s\n", cs->name);
+
+ res = setup_irq(clock->irq.irq, &clock->irq);
+ if (res)
+ printk(KERN_ERR "msm_timer_init: setup_irq "
+ "failed for %s\n", cs->name);
+
+ clockevents_register_device(ce);
+ }
+}
+
+struct sys_timer msm_timer = {
+ .init = msm_timer_init
+};
diff --git a/arch/arm/mach-mx3/time.c b/arch/arm/mach-mx3/time.c
index e81fb5c..fb565c9 100644
--- a/arch/arm/mach-mx3/time.c
+++ b/arch/arm/mach-mx3/time.c
@@ -45,8 +45,6 @@
{
unsigned int next_match;
- write_seqlock(&xtime_lock);
-
if (__raw_readl(MXC_GPT_GPTSR) & GPTSR_OF1) {
do {
timer_tick();
@@ -57,8 +55,6 @@
__raw_readl(MXC_GPT_GPTCNT)) <= 0);
}
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index 4762e20..ea07b54 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -33,12 +33,8 @@
static irqreturn_t
netx_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
timer_tick();
- write_sequnlock(&xtime_lock);
-
/* acknowledge interrupt */
writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index d5f6ea1..f550b19 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -76,7 +76,7 @@
[1] = {
.start = INT_730_MPU_EXT_NIRQ,
.end = 0,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 9393824..bfa04fa 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -209,7 +209,7 @@
[1] = {
.start = OMAP_GPIO_IRQ(0),
.end = OMAP_GPIO_IRQ(0),
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 978cdab..0565198 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -208,7 +208,7 @@
[1] = {
.start = OMAP_GPIO_IRQ(40),
.end = OMAP_GPIO_IRQ(40),
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 7e63a41..7d2d8af 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -202,7 +202,7 @@
[1] = {
.start = OMAP1510_INT_ETHER,
.end = OMAP1510_INT_ETHER,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
@@ -269,7 +269,7 @@
[1] = {
.start = OMAP_GPIO_IRQ(0),
.end = OMAP_GPIO_IRQ(0),
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 182a98a..e2c8ffd 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -32,7 +32,6 @@
#include <asm/arch/common.h>
#include <asm/arch/dsp_common.h>
#include <asm/arch/aic23.h>
-#include <asm/arch/gpio.h>
#include <asm/arch/omapfb.h>
#include <asm/arch/lcd_mipid.h>
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 5b575e6..8433344 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -31,7 +31,6 @@
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/mtd/mtd.h>
@@ -112,7 +111,7 @@
[1] = {
.start = OMAP_GPIO_IRQ(0),
.end = OMAP_GPIO_IRQ(0),
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index e47010f..ed7094a 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -42,7 +42,6 @@
#include <asm/arch/common.h>
#include <asm/arch/omap-alsa.h>
-#include <linux/input.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index c275d51..a9a0f66 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -44,7 +44,6 @@
#include <asm/arch/common.h>
#include <asm/arch/omap-alsa.h>
-#include <linux/input.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index e44437e..534dcfb 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -75,7 +75,7 @@
[1] = {
.start = INT_730_MPU_EXT_NIRQ,
.end = 0,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 214dd19..c82a1cd 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -117,7 +117,7 @@
[1] = {
.start = OMAP_GPIO_IRQ(8),
.end = OMAP_GPIO_IRQ(8),
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index d9805e3..06b7e54 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -639,7 +639,7 @@
}
-static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
+static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
{
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 7e76fbf..64235de 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -104,7 +104,7 @@
[1] = {
.start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
.end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 3bb49c1..7846551 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -26,7 +26,6 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/leds.h>
-#include <linux/irq.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
@@ -127,7 +126,7 @@
[1] = {
.start = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
.end = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 8d322c2..3234dee 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -40,13 +40,9 @@
static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
omap_dm_timer_write_status(gptimer, OMAP_TIMER_INT_OVERFLOW);
timer_tick();
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-orion/Kconfig b/arch/arm/mach-orion/Kconfig
new file mode 100644
index 0000000..1dcbb6a
--- /dev/null
+++ b/arch/arm/mach-orion/Kconfig
@@ -0,0 +1,41 @@
+if ARCH_ORION
+
+menu "Orion Implementations"
+
+config MACH_DB88F5281
+ bool "Marvell Orion-2 Development Board"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Orion-2 (88F5281) Development Board
+
+config MACH_RD88F5182
+ bool "Marvell Orion-NAS Reference Design"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Orion-NAS (88F5182) RD2
+
+config MACH_KUROBOX_PRO
+ bool "KuroBox Pro"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ KuroBox Pro platform.
+
+config MACH_DNS323
+ bool "D-Link DNS-323"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ D-Link DNS-323 platform.
+
+config MACH_TS209
+ bool "QNAP TS-109/TS-209"
+ help
+ Say 'Y' here if you want your kernel to support the
+ QNAP TS-109/TS-209 platform.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-orion/Makefile b/arch/arm/mach-orion/Makefile
new file mode 100644
index 0000000..f91d937
--- /dev/null
+++ b/arch/arm/mach-orion/Makefile
@@ -0,0 +1,6 @@
+obj-y += common.o addr-map.o pci.o gpio.o irq.o time.o
+obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o
+obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o
+obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o
+obj-$(CONFIG_MACH_DNS323) += dns323-setup.o
+obj-$(CONFIG_MACH_TS209) += ts209-setup.o
diff --git a/arch/arm/mach-orion/Makefile.boot b/arch/arm/mach-orion/Makefile.boot
new file mode 100644
index 0000000..67039c3
--- /dev/null
+++ b/arch/arm/mach-orion/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-orion/addr-map.c b/arch/arm/mach-orion/addr-map.c
new file mode 100644
index 0000000..488da38
--- /dev/null
+++ b/arch/arm/mach-orion/addr-map.c
@@ -0,0 +1,484 @@
+/*
+ * arch/arm/mach-orion/addr-map.c
+ *
+ * Address map functions for Marvell Orion System On Chip
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/hardware.h>
+#include "common.h"
+
+/*
+ * The Orion has fully programable address map. There's a separate address
+ * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB,
+ * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own
+ * address decode windows that allow it to access any of the Orion resources.
+ *
+ * CPU address decoding --
+ * Linux assumes that it is the boot loader that already setup the access to
+ * DDR and internal registers.
+ * Setup access to PCI and PCI-E IO/MEM space is issued by core.c.
+ * Setup access to various devices located on the device bus interface (e.g.
+ * flashes, RTC, etc) should be issued by machine-setup.c according to
+ * specific board population (by using orion_setup_cpu_win()).
+ *
+ * Non-CPU Masters address decoding --
+ * Unlike the CPU, we setup the access from Orion's master interfaces to DDR
+ * banks only (the typical use case).
+ * Setup access for each master to DDR is issued by common.c.
+ *
+ * Note: although orion_setbits() and orion_clrbits() are not atomic
+ * no locking is necessary here since code in this file is only called
+ * at boot time when there is no concurrency issues.
+ */
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR 0
+#define TARGET_PCI 3
+#define TARGET_PCIE 4
+#define TARGET_DEV_BUS 1
+#define ATTR_DDR_CS(n) (((n) ==0) ? 0xe : \
+ ((n) == 1) ? 0xd : \
+ ((n) == 2) ? 0xb : \
+ ((n) == 3) ? 0x7 : 0xf)
+#define ATTR_PCIE_MEM 0x59
+#define ATTR_PCIE_IO 0x51
+#define ATTR_PCI_MEM 0x59
+#define ATTR_PCI_IO 0x51
+#define ATTR_DEV_CS0 0x1e
+#define ATTR_DEV_CS1 0x1d
+#define ATTR_DEV_CS2 0x1b
+#define ATTR_DEV_BOOT 0xf
+#define WIN_EN 1
+
+/*
+ * Helpers to get DDR banks info
+ */
+#define DDR_BASE_CS(n) ORION_DDR_REG(0x1500 + ((n) * 8))
+#define DDR_SIZE_CS(n) ORION_DDR_REG(0x1504 + ((n) * 8))
+#define DDR_MAX_CS 4
+#define DDR_REG_TO_SIZE(reg) (((reg) | 0xffffff) + 1)
+#define DDR_REG_TO_BASE(reg) ((reg) & 0xff000000)
+#define DDR_BANK_EN 1
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define CPU_WIN_CTRL(n) ORION_BRIDGE_REG(0x000 | ((n) << 4))
+#define CPU_WIN_BASE(n) ORION_BRIDGE_REG(0x004 | ((n) << 4))
+#define CPU_WIN_REMAP_LO(n) ORION_BRIDGE_REG(0x008 | ((n) << 4))
+#define CPU_WIN_REMAP_HI(n) ORION_BRIDGE_REG(0x00c | ((n) << 4))
+#define CPU_MAX_WIN 8
+
+/*
+ * Use this CPU address decode windows allocation
+ */
+#define CPU_WIN_PCIE_IO 0
+#define CPU_WIN_PCI_IO 1
+#define CPU_WIN_PCIE_MEM 2
+#define CPU_WIN_PCI_MEM 3
+#define CPU_WIN_DEV_BOOT 4
+#define CPU_WIN_DEV_CS0 5
+#define CPU_WIN_DEV_CS1 6
+#define CPU_WIN_DEV_CS2 7
+
+/*
+ * PCIE Address Decode Windows registers
+ */
+#define PCIE_BAR_CTRL(n) ORION_PCIE_REG(0x1804 + ((n - 1) * 4))
+#define PCIE_BAR_LO(n) ORION_PCIE_REG(0x0010 + ((n) * 8))
+#define PCIE_BAR_HI(n) ORION_PCIE_REG(0x0014 + ((n) * 8))
+#define PCIE_WIN_CTRL(n) ORION_PCIE_REG(0x1820 + ((n) << 4))
+#define PCIE_WIN_BASE(n) ORION_PCIE_REG(0x1824 + ((n) << 4))
+#define PCIE_WIN_REMAP(n) ORION_PCIE_REG(0x182c + ((n) << 4))
+#define PCIE_DEFWIN_CTRL ORION_PCIE_REG(0x18b0)
+#define PCIE_EXPROM_WIN_CTRL ORION_PCIE_REG(0x18c0)
+#define PCIE_EXPROM_WIN_REMP ORION_PCIE_REG(0x18c4)
+#define PCIE_MAX_BARS 3
+#define PCIE_MAX_WINS 5
+
+/*
+ * Use PCIE BAR '1' for all DDR banks
+ */
+#define PCIE_DRAM_BAR 1
+
+/*
+ * PCI Address Decode Windows registers
+ */
+#define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION_PCI_REG(0xc08) : \
+ ((n) == 1) ? ORION_PCI_REG(0xd08) : \
+ ((n) == 2) ? ORION_PCI_REG(0xc0c) : \
+ ((n) == 3) ? ORION_PCI_REG(0xd0c) : 0)
+#define PCI_BAR_REMAP_DDR_CS(n) (((n) ==0) ? ORION_PCI_REG(0xc48) : \
+ ((n) == 1) ? ORION_PCI_REG(0xd48) : \
+ ((n) == 2) ? ORION_PCI_REG(0xc4c) : \
+ ((n) == 3) ? ORION_PCI_REG(0xd4c) : 0)
+#define PCI_BAR_ENABLE ORION_PCI_REG(0xc3c)
+#define PCI_CTRL_BASE_LO(n) ORION_PCI_REG(0x1e00 | ((n) << 4))
+#define PCI_CTRL_BASE_HI(n) ORION_PCI_REG(0x1e04 | ((n) << 4))
+#define PCI_CTRL_SIZE(n) ORION_PCI_REG(0x1e08 | ((n) << 4))
+#define PCI_ADDR_DECODE_CTRL ORION_PCI_REG(0xd3c)
+
+/*
+ * PCI configuration heleprs for BAR settings
+ */
+#define PCI_CONF_FUNC_BAR_CS(n) ((n) >> 1)
+#define PCI_CONF_REG_BAR_LO_CS(n) (((n) & 1) ? 0x18 : 0x10)
+#define PCI_CONF_REG_BAR_HI_CS(n) (((n) & 1) ? 0x1c : 0x14)
+
+/*
+ * Gigabit Ethernet Address Decode Windows registers
+ */
+#define ETH_WIN_BASE(win) ORION_ETH_REG(0x200 + ((win) * 8))
+#define ETH_WIN_SIZE(win) ORION_ETH_REG(0x204 + ((win) * 8))
+#define ETH_WIN_REMAP(win) ORION_ETH_REG(0x280 + ((win) * 4))
+#define ETH_WIN_EN ORION_ETH_REG(0x290)
+#define ETH_WIN_PROT ORION_ETH_REG(0x294)
+#define ETH_MAX_WIN 6
+#define ETH_MAX_REMAP_WIN 4
+
+/*
+ * USB Address Decode Windows registers
+ */
+#define USB_WIN_CTRL(i, w) ((i == 0) ? ORION_USB0_REG(0x320 + ((w) << 4)) \
+ : ORION_USB1_REG(0x320 + ((w) << 4)))
+#define USB_WIN_BASE(i, w) ((i == 0) ? ORION_USB0_REG(0x324 + ((w) << 4)) \
+ : ORION_USB1_REG(0x324 + ((w) << 4)))
+#define USB_MAX_WIN 4
+
+/*
+ * SATA Address Decode Windows registers
+ */
+#define SATA_WIN_CTRL(win) ORION_SATA_REG(0x30 + ((win) * 0x10))
+#define SATA_WIN_BASE(win) ORION_SATA_REG(0x34 + ((win) * 0x10))
+#define SATA_MAX_WIN 4
+
+static int __init orion_cpu_win_can_remap(u32 win)
+{
+ u32 dev, rev;
+
+ orion_pcie_id(&dev, &rev);
+ if ((dev == MV88F5281_DEV_ID && win < 4)
+ || (dev == MV88F5182_DEV_ID && win < 2)
+ || (dev == MV88F5181_DEV_ID && win < 2))
+ return 1;
+
+ return 0;
+}
+
+void __init orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap)
+{
+ u32 win, attr, ctrl;
+
+ switch (target) {
+ case ORION_PCIE_IO:
+ target = TARGET_PCIE;
+ attr = ATTR_PCIE_IO;
+ win = CPU_WIN_PCIE_IO;
+ break;
+ case ORION_PCI_IO:
+ target = TARGET_PCI;
+ attr = ATTR_PCI_IO;
+ win = CPU_WIN_PCI_IO;
+ break;
+ case ORION_PCIE_MEM:
+ target = TARGET_PCIE;
+ attr = ATTR_PCIE_MEM;
+ win = CPU_WIN_PCIE_MEM;
+ break;
+ case ORION_PCI_MEM:
+ target = TARGET_PCI;
+ attr = ATTR_PCI_MEM;
+ win = CPU_WIN_PCI_MEM;
+ break;
+ case ORION_DEV_BOOT:
+ target = TARGET_DEV_BUS;
+ attr = ATTR_DEV_BOOT;
+ win = CPU_WIN_DEV_BOOT;
+ break;
+ case ORION_DEV0:
+ target = TARGET_DEV_BUS;
+ attr = ATTR_DEV_CS0;
+ win = CPU_WIN_DEV_CS0;
+ break;
+ case ORION_DEV1:
+ target = TARGET_DEV_BUS;
+ attr = ATTR_DEV_CS1;
+ win = CPU_WIN_DEV_CS1;
+ break;
+ case ORION_DEV2:
+ target = TARGET_DEV_BUS;
+ attr = ATTR_DEV_CS2;
+ win = CPU_WIN_DEV_CS2;
+ break;
+ case ORION_DDR:
+ case ORION_REGS:
+ /*
+ * Must be mapped by bootloader.
+ */
+ default:
+ target = attr = win = -1;
+ BUG();
+ }
+
+ base &= 0xffff0000;
+ ctrl = (((size - 1) & 0xffff0000) | (attr << 8) |
+ (target << 4) | WIN_EN);
+
+ orion_write(CPU_WIN_BASE(win), base);
+ orion_write(CPU_WIN_CTRL(win), ctrl);
+
+ if (orion_cpu_win_can_remap(win)) {
+ if (remap >= 0) {
+ orion_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000);
+ orion_write(CPU_WIN_REMAP_HI(win), 0);
+ } else {
+ orion_write(CPU_WIN_REMAP_LO(win), base);
+ orion_write(CPU_WIN_REMAP_HI(win), 0);
+ }
+ }
+}
+
+void __init orion_setup_cpu_wins(void)
+{
+ int i;
+
+ /*
+ * First, disable and clear windows
+ */
+ for (i = 0; i < CPU_MAX_WIN; i++) {
+ orion_write(CPU_WIN_BASE(i), 0);
+ orion_write(CPU_WIN_CTRL(i), 0);
+ if (orion_cpu_win_can_remap(i)) {
+ orion_write(CPU_WIN_REMAP_LO(i), 0);
+ orion_write(CPU_WIN_REMAP_HI(i), 0);
+ }
+ }
+
+ /*
+ * Setup windows for PCI+PCIE IO+MAM space
+ */
+ orion_setup_cpu_win(ORION_PCIE_IO, ORION_PCIE_IO_BASE,
+ ORION_PCIE_IO_SIZE, ORION_PCIE_IO_REMAP);
+ orion_setup_cpu_win(ORION_PCI_IO, ORION_PCI_IO_BASE,
+ ORION_PCI_IO_SIZE, ORION_PCI_IO_REMAP);
+ orion_setup_cpu_win(ORION_PCIE_MEM, ORION_PCIE_MEM_BASE,
+ ORION_PCIE_MEM_SIZE, -1);
+ orion_setup_cpu_win(ORION_PCI_MEM, ORION_PCI_MEM_BASE,
+ ORION_PCI_MEM_SIZE, -1);
+}
+
+/*
+ * Setup PCIE BARs and Address Decode Wins:
+ * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
+ * WIN[0-3] -> DRAM bank[0-3]
+ */
+void __init orion_setup_pcie_wins(void)
+{
+ u32 base, size, i;
+
+ /*
+ * First, disable and clear BARs and windows
+ */
+ for (i = 1; i < PCIE_MAX_BARS; i++) {
+ orion_write(PCIE_BAR_CTRL(i), 0);
+ orion_write(PCIE_BAR_LO(i), 0);
+ orion_write(PCIE_BAR_HI(i), 0);
+ }
+
+ for (i = 0; i < PCIE_MAX_WINS; i++) {
+ orion_write(PCIE_WIN_CTRL(i), 0);
+ orion_write(PCIE_WIN_BASE(i), 0);
+ orion_write(PCIE_WIN_REMAP(i), 0);
+ }
+
+ /*
+ * Setup windows for DDR banks. Count total DDR size on the fly.
+ */
+ base = DDR_REG_TO_BASE(orion_read(DDR_BASE_CS(0)));
+ size = 0;
+ for (i = 0; i < DDR_MAX_CS; i++) {
+ u32 bank_base, bank_size;
+ bank_size = orion_read(DDR_SIZE_CS(i));
+ bank_base = orion_read(DDR_BASE_CS(i));
+ if (bank_size & DDR_BANK_EN) {
+ bank_size = DDR_REG_TO_SIZE(bank_size);
+ bank_base = DDR_REG_TO_BASE(bank_base);
+ orion_write(PCIE_WIN_BASE(i), bank_base & 0xffff0000);
+ orion_write(PCIE_WIN_REMAP(i), 0);
+ orion_write(PCIE_WIN_CTRL(i),
+ ((bank_size-1) & 0xffff0000) |
+ (ATTR_DDR_CS(i) << 8) |
+ (TARGET_DDR << 4) |
+ (PCIE_DRAM_BAR << 1) | WIN_EN);
+ size += bank_size;
+ }
+ }
+
+ /*
+ * Setup BAR[1] to all DRAM banks
+ */
+ orion_write(PCIE_BAR_LO(PCIE_DRAM_BAR), base & 0xffff0000);
+ orion_write(PCIE_BAR_HI(PCIE_DRAM_BAR), 0);
+ orion_write(PCIE_BAR_CTRL(PCIE_DRAM_BAR),
+ ((size - 1) & 0xffff0000) | WIN_EN);
+}
+
+void __init orion_setup_pci_wins(void)
+{
+ u32 base, size, i;
+
+ /*
+ * First, disable windows
+ */
+ orion_write(PCI_BAR_ENABLE, 0xffffffff);
+
+ /*
+ * Setup windows for DDR banks.
+ */
+ for (i = 0; i < DDR_MAX_CS; i++) {
+ base = orion_read(DDR_BASE_CS(i));
+ size = orion_read(DDR_SIZE_CS(i));
+ if (size & DDR_BANK_EN) {
+ u32 bus, dev, func, reg, val;
+ size = DDR_REG_TO_SIZE(size);
+ base = DDR_REG_TO_BASE(base);
+ bus = orion_pci_local_bus_nr();
+ dev = orion_pci_local_dev_nr();
+ func = PCI_CONF_FUNC_BAR_CS(i);
+ reg = PCI_CONF_REG_BAR_LO_CS(i);
+ orion_pci_hw_rd_conf(bus, dev, func, reg, 4, &val);
+ orion_pci_hw_wr_conf(bus, dev, func, reg, 4,
+ (base & 0xfffff000) | (val & 0xfff));
+ reg = PCI_CONF_REG_BAR_HI_CS(i);
+ orion_pci_hw_wr_conf(bus, dev, func, reg, 4, 0);
+ orion_write(PCI_BAR_SIZE_DDR_CS(i),
+ (size - 1) & 0xfffff000);
+ orion_write(PCI_BAR_REMAP_DDR_CS(i),
+ base & 0xfffff000);
+ orion_clrbits(PCI_BAR_ENABLE, (1 << i));
+ }
+ }
+
+ /*
+ * Disable automatic update of address remaping when writing to BARs
+ */
+ orion_setbits(PCI_ADDR_DECODE_CTRL, 1);
+}
+
+void __init orion_setup_usb_wins(void)
+{
+ int i;
+ u32 usb_if, dev, rev;
+ u32 max_usb_if = 1;
+
+ orion_pcie_id(&dev, &rev);
+ if (dev == MV88F5182_DEV_ID)
+ max_usb_if = 2;
+
+ for (usb_if = 0; usb_if < max_usb_if; usb_if++) {
+ /*
+ * First, disable and clear windows
+ */
+ for (i = 0; i < USB_MAX_WIN; i++) {
+ orion_write(USB_WIN_BASE(usb_if, i), 0);
+ orion_write(USB_WIN_CTRL(usb_if, i), 0);
+ }
+
+ /*
+ * Setup windows for DDR banks.
+ */
+ for (i = 0; i < DDR_MAX_CS; i++) {
+ u32 base, size;
+ size = orion_read(DDR_SIZE_CS(i));
+ base = orion_read(DDR_BASE_CS(i));
+ if (size & DDR_BANK_EN) {
+ base = DDR_REG_TO_BASE(base);
+ size = DDR_REG_TO_SIZE(size);
+ orion_write(USB_WIN_CTRL(usb_if, i),
+ ((size-1) & 0xffff0000) |
+ (ATTR_DDR_CS(i) << 8) |
+ (TARGET_DDR << 4) | WIN_EN);
+ orion_write(USB_WIN_BASE(usb_if, i),
+ base & 0xffff0000);
+ }
+ }
+ }
+}
+
+void __init orion_setup_eth_wins(void)
+{
+ int i;
+
+ /*
+ * First, disable and clear windows
+ */
+ for (i = 0; i < ETH_MAX_WIN; i++) {
+ orion_write(ETH_WIN_BASE(i), 0);
+ orion_write(ETH_WIN_SIZE(i), 0);
+ orion_setbits(ETH_WIN_EN, 1 << i);
+ orion_clrbits(ETH_WIN_PROT, 0x3 << (i * 2));
+ if (i < ETH_MAX_REMAP_WIN)
+ orion_write(ETH_WIN_REMAP(i), 0);
+ }
+
+ /*
+ * Setup windows for DDR banks.
+ */
+ for (i = 0; i < DDR_MAX_CS; i++) {
+ u32 base, size;
+ size = orion_read(DDR_SIZE_CS(i));
+ base = orion_read(DDR_BASE_CS(i));
+ if (size & DDR_BANK_EN) {
+ base = DDR_REG_TO_BASE(base);
+ size = DDR_REG_TO_SIZE(size);
+ orion_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000);
+ orion_write(ETH_WIN_BASE(i), (base & 0xffff0000) |
+ (ATTR_DDR_CS(i) << 8) |
+ TARGET_DDR);
+ orion_clrbits(ETH_WIN_EN, 1 << i);
+ orion_setbits(ETH_WIN_PROT, 0x3 << (i * 2));
+ }
+ }
+}
+
+void __init orion_setup_sata_wins(void)
+{
+ int i;
+
+ /*
+ * First, disable and clear windows
+ */
+ for (i = 0; i < SATA_MAX_WIN; i++) {
+ orion_write(SATA_WIN_BASE(i), 0);
+ orion_write(SATA_WIN_CTRL(i), 0);
+ }
+
+ /*
+ * Setup windows for DDR banks.
+ */
+ for (i = 0; i < DDR_MAX_CS; i++) {
+ u32 base, size;
+ size = orion_read(DDR_SIZE_CS(i));
+ base = orion_read(DDR_BASE_CS(i));
+ if (size & DDR_BANK_EN) {
+ base = DDR_REG_TO_BASE(base);
+ size = DDR_REG_TO_SIZE(size);
+ orion_write(SATA_WIN_CTRL(i),
+ ((size-1) & 0xffff0000) |
+ (ATTR_DDR_CS(i) << 8) |
+ (TARGET_DDR << 4) | WIN_EN);
+ orion_write(SATA_WIN_BASE(i),
+ base & 0xffff0000);
+ }
+ }
+}
diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion/common.c
new file mode 100644
index 0000000..5e20b6b
--- /dev/null
+++ b/arch/arm/mach-orion/common.c
@@ -0,0 +1,315 @@
+/*
+ * arch/arm/mach-orion/common.c
+ *
+ * Core functions for Marvell Orion System On Chip
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
+#include <asm/page.h>
+#include <asm/timex.h>
+#include <asm/mach/map.h>
+#include <asm/arch/orion.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc orion_io_desc[] __initdata = {
+ {
+ .virtual = ORION_REGS_BASE,
+ .pfn = __phys_to_pfn(ORION_REGS_BASE),
+ .length = ORION_REGS_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = ORION_PCIE_IO_BASE,
+ .pfn = __phys_to_pfn(ORION_PCIE_IO_BASE),
+ .length = ORION_PCIE_IO_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = ORION_PCI_IO_BASE,
+ .pfn = __phys_to_pfn(ORION_PCI_IO_BASE),
+ .length = ORION_PCI_IO_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = ORION_PCIE_WA_BASE,
+ .pfn = __phys_to_pfn(ORION_PCIE_WA_BASE),
+ .length = ORION_PCIE_WA_SIZE,
+ .type = MT_DEVICE
+ },
+};
+
+void __init orion_map_io(void)
+{
+ iotable_init(orion_io_desc, ARRAY_SIZE(orion_io_desc));
+}
+
+/*****************************************************************************
+ * UART
+ ****************************************************************************/
+
+static struct resource orion_uart_resources[] = {
+ {
+ .start = UART0_BASE,
+ .end = UART0_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_ORION_UART0,
+ .end = IRQ_ORION_UART0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = UART1_BASE,
+ .end = UART1_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_ORION_UART1,
+ .end = IRQ_ORION_UART1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct plat_serial8250_port orion_uart_data[] = {
+ {
+ .mapbase = UART0_BASE,
+ .membase = (char *)UART0_BASE,
+ .irq = IRQ_ORION_UART0,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = ORION_TCLK,
+ },
+ {
+ .mapbase = UART1_BASE,
+ .membase = (char *)UART1_BASE,
+ .irq = IRQ_ORION_UART1,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = ORION_TCLK,
+ },
+ { },
+};
+
+static struct platform_device orion_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = orion_uart_data,
+ },
+ .resource = orion_uart_resources,
+ .num_resources = ARRAY_SIZE(orion_uart_resources),
+};
+
+/*******************************************************************************
+ * USB Controller - 2 interfaces
+ ******************************************************************************/
+
+static struct resource orion_ehci0_resources[] = {
+ {
+ .start = ORION_USB0_REG_BASE,
+ .end = ORION_USB0_REG_BASE + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_ORION_USB0_CTRL,
+ .end = IRQ_ORION_USB0_CTRL,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource orion_ehci1_resources[] = {
+ {
+ .start = ORION_USB1_REG_BASE,
+ .end = ORION_USB1_REG_BASE + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_ORION_USB1_CTRL,
+ .end = IRQ_ORION_USB1_CTRL,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 ehci_dmamask = 0xffffffffUL;
+
+static struct platform_device orion_ehci0 = {
+ .name = "orion-ehci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = orion_ehci0_resources,
+ .num_resources = ARRAY_SIZE(orion_ehci0_resources),
+};
+
+static struct platform_device orion_ehci1 = {
+ .name = "orion-ehci",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = orion_ehci1_resources,
+ .num_resources = ARRAY_SIZE(orion_ehci1_resources),
+};
+
+/*****************************************************************************
+ * Gigabit Ethernet port
+ * (The Orion and Discovery (MV643xx) families use the same Ethernet driver)
+ ****************************************************************************/
+
+static struct resource orion_eth_shared_resources[] = {
+ {
+ .start = ORION_ETH_REG_BASE,
+ .end = ORION_ETH_REG_BASE + 0xffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device orion_eth_shared = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 0,
+ .num_resources = 1,
+ .resource = orion_eth_shared_resources,
+};
+
+static struct resource orion_eth_resources[] = {
+ {
+ .name = "eth irq",
+ .start = IRQ_ORION_ETH_SUM,
+ .end = IRQ_ORION_ETH_SUM,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device orion_eth = {
+ .name = MV643XX_ETH_NAME,
+ .id = 0,
+ .num_resources = 1,
+ .resource = orion_eth_resources,
+};
+
+void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data)
+{
+ orion_eth.dev.platform_data = eth_data;
+ platform_device_register(&orion_eth_shared);
+ platform_device_register(&orion_eth);
+}
+
+/*****************************************************************************
+ * I2C controller
+ * (The Orion and Discovery (MV643xx) families share the same I2C controller)
+ ****************************************************************************/
+
+static struct mv64xxx_i2c_pdata orion_i2c_pdata = {
+ .freq_m = 8, /* assumes 166 MHz TCLK */
+ .freq_n = 3,
+ .timeout = 1000, /* Default timeout of 1 second */
+};
+
+static struct resource orion_i2c_resources[] = {
+ {
+ .name = "i2c base",
+ .start = I2C_BASE,
+ .end = I2C_BASE + 0x20 -1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "i2c irq",
+ .start = IRQ_ORION_I2C,
+ .end = IRQ_ORION_I2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device orion_i2c = {
+ .name = MV64XXX_I2C_CTLR_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(orion_i2c_resources),
+ .resource = orion_i2c_resources,
+ .dev = {
+ .platform_data = &orion_i2c_pdata,
+ },
+};
+
+/*****************************************************************************
+ * General
+ ****************************************************************************/
+
+/*
+ * Identify device ID and rev from PCIE configuration header space '0'.
+ */
+static void orion_id(u32 *dev, u32 *rev, char **dev_name)
+{
+ orion_pcie_id(dev, rev);
+
+ if (*dev == MV88F5281_DEV_ID) {
+ if (*rev == MV88F5281_REV_D2) {
+ *dev_name = "MV88F5281-D2";
+ } else if (*rev == MV88F5281_REV_D1) {
+ *dev_name = "MV88F5281-D1";
+ } else {
+ *dev_name = "MV88F5281-Rev-Unsupported";
+ }
+ } else if (*dev == MV88F5182_DEV_ID) {
+ if (*rev == MV88F5182_REV_A2) {
+ *dev_name = "MV88F5182-A2";
+ } else {
+ *dev_name = "MV88F5182-Rev-Unsupported";
+ }
+ } else if (*dev == MV88F5181_DEV_ID) {
+ if (*rev == MV88F5181_REV_B1) {
+ *dev_name = "MV88F5181-Rev-B1";
+ } else {
+ *dev_name = "MV88F5181-Rev-Unsupported";
+ }
+ } else {
+ *dev_name = "Device-Unknown";
+ }
+}
+
+void __init orion_init(void)
+{
+ char *dev_name;
+ u32 dev, rev;
+
+ orion_id(&dev, &rev, &dev_name);
+ printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, ORION_TCLK);
+
+ /*
+ * Setup Orion address map
+ */
+ orion_setup_cpu_wins();
+ orion_setup_usb_wins();
+ orion_setup_eth_wins();
+ orion_setup_pci_wins();
+ orion_setup_pcie_wins();
+ if (dev == MV88F5182_DEV_ID)
+ orion_setup_sata_wins();
+
+ /*
+ * REgister devices
+ */
+ platform_device_register(&orion_uart);
+ platform_device_register(&orion_ehci0);
+ if (dev == MV88F5182_DEV_ID)
+ platform_device_register(&orion_ehci1);
+ platform_device_register(&orion_i2c);
+}
diff --git a/arch/arm/mach-orion/common.h b/arch/arm/mach-orion/common.h
new file mode 100644
index 0000000..06c10c0
--- /dev/null
+++ b/arch/arm/mach-orion/common.h
@@ -0,0 +1,78 @@
+#ifndef __ARCH_ORION_COMMON_H__
+#define __ARCH_ORION_COMMON_H__
+
+/*
+ * Basic Orion init functions used early by machine-setup.
+ */
+
+void __init orion_map_io(void);
+void __init orion_init_irq(void);
+void __init orion_init(void);
+
+/*
+ * Enumerations and functions for Orion windows mapping. Used by Orion core
+ * functions to map its interfaces and by the machine-setup to map its on-
+ * board devices. Details in /mach-orion/addr-map.c
+ */
+
+enum orion_target {
+ ORION_DEV_BOOT = 0,
+ ORION_DEV0,
+ ORION_DEV1,
+ ORION_DEV2,
+ ORION_PCIE_MEM,
+ ORION_PCIE_IO,
+ ORION_PCI_MEM,
+ ORION_PCI_IO,
+ ORION_DDR,
+ ORION_REGS,
+ ORION_MAX_TARGETS
+};
+
+void orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap);
+void orion_setup_cpu_wins(void);
+void orion_setup_eth_wins(void);
+void orion_setup_usb_wins(void);
+void orion_setup_pci_wins(void);
+void orion_setup_pcie_wins(void);
+void orion_setup_sata_wins(void);
+
+/*
+ * Shared code used internally by other Orion core functions.
+ * (/mach-orion/pci.c)
+ */
+
+struct pci_sys_data;
+struct pci_bus;
+
+void orion_pcie_id(u32 *dev, u32 *rev);
+u32 orion_pcie_local_bus_nr(void);
+u32 orion_pci_local_bus_nr(void);
+u32 orion_pci_local_dev_nr(void);
+int orion_pci_sys_setup(int nr, struct pci_sys_data *sys);
+struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
+int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func, u32 where, u32 size, u32 *val);
+int orion_pci_hw_wr_conf(u32 bus, u32 dev, u32 func, u32 where, u32 size, u32 val);
+
+/*
+ * Valid GPIO pins according to MPP setup, used by machine-setup.
+ * (/mach-orion/gpio.c).
+ */
+
+void __init orion_gpio_set_valid_pins(u32 pins);
+void gpio_display(void); /* debug */
+
+/*
+ * Orion system timer (clocksource + clockevnt, /mach-orion/time.c)
+ */
+extern struct sys_timer orion_timer;
+
+/*
+ * Pull in Orion Ethernet platform_data, used by machine-setup
+ */
+
+struct mv643xx_eth_platform_data;
+
+void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data);
+
+#endif /* __ARCH_ORION_COMMON_H__ */
diff --git a/arch/arm/mach-orion/db88f5281-setup.c b/arch/arm/mach-orion/db88f5281-setup.c
new file mode 100644
index 0000000..cb2a95c
--- /dev/null
+++ b/arch/arm/mach-orion/db88f5281-setup.c
@@ -0,0 +1,364 @@
+/*
+ * arch/arm/mach-orion/db88f5281-setup.c
+ *
+ * Marvell Orion-2 Development Board Setup
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion.h>
+#include <asm/arch/platform.h>
+#include "common.h"
+
+/*****************************************************************************
+ * DB-88F5281 on board devices
+ ****************************************************************************/
+
+/*
+ * 512K NOR flash Device bus boot chip select
+ */
+
+#define DB88F5281_NOR_BOOT_BASE 0xf4000000
+#define DB88F5281_NOR_BOOT_SIZE SZ_512K
+
+/*
+ * 7-Segment on Device bus chip select 0
+ */
+
+#define DB88F5281_7SEG_BASE 0xfa000000
+#define DB88F5281_7SEG_SIZE SZ_1K
+
+/*
+ * 32M NOR flash on Device bus chip select 1
+ */
+
+#define DB88F5281_NOR_BASE 0xfc000000
+#define DB88F5281_NOR_SIZE SZ_32M
+
+/*
+ * 32M NAND flash on Device bus chip select 2
+ */
+
+#define DB88F5281_NAND_BASE 0xfa800000
+#define DB88F5281_NAND_SIZE SZ_1K
+
+/*
+ * PCI
+ */
+
+#define DB88F5281_PCI_SLOT0_OFFS 7
+#define DB88F5281_PCI_SLOT0_IRQ_PIN 12
+#define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN 13
+
+/*****************************************************************************
+ * 512M NOR Flash on Device bus Boot CS
+ ****************************************************************************/
+
+static struct physmap_flash_data db88f5281_boot_flash_data = {
+ .width = 1, /* 8 bit bus width */
+};
+
+static struct resource db88f5281_boot_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = DB88F5281_NOR_BOOT_BASE,
+ .end = DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device db88f5281_boot_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &db88f5281_boot_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &db88f5281_boot_flash_resource,
+};
+
+/*****************************************************************************
+ * 32M NOR Flash on Device bus CS1
+ ****************************************************************************/
+
+static struct physmap_flash_data db88f5281_nor_flash_data = {
+ .width = 4, /* 32 bit bus width */
+};
+
+static struct resource db88f5281_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = DB88F5281_NOR_BASE,
+ .end = DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1,
+};
+
+static struct platform_device db88f5281_nor_flash = {
+ .name = "physmap-flash",
+ .id = 1,
+ .dev = {
+ .platform_data = &db88f5281_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &db88f5281_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * 32M NAND Flash on Device bus CS2
+ ****************************************************************************/
+
+static struct mtd_partition db88f5281_nand_parts[] = {
+ {
+ .name = "kernel",
+ .offset = 0,
+ .size = SZ_2M,
+ },
+ {
+ .name = "root",
+ .offset = SZ_2M,
+ .size = (SZ_16M - SZ_2M),
+ },
+ {
+ .name = "user",
+ .offset = SZ_16M,
+ .size = SZ_8M,
+ },
+ {
+ .name = "recovery",
+ .offset = (SZ_16M + SZ_8M),
+ .size = SZ_8M,
+ },
+};
+
+static struct resource db88f5281_nand_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = DB88F5281_NAND_BASE,
+ .end = DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1,
+};
+
+static struct orion_nand_data db88f5281_nand_data = {
+ .parts = db88f5281_nand_parts,
+ .nr_parts = ARRAY_SIZE(db88f5281_nand_parts),
+ .cle = 0,
+ .ale = 1,
+ .width = 8,
+};
+
+static struct platform_device db88f5281_nand_flash = {
+ .name = "orion_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &db88f5281_nand_data,
+ },
+ .resource = &db88f5281_nand_resource,
+ .num_resources = 1,
+};
+
+/*****************************************************************************
+ * 7-Segment on Device bus CS0
+ * Dummy counter every 2 sec
+ ****************************************************************************/
+
+static void __iomem *db88f5281_7seg;
+static struct timer_list db88f5281_timer;
+
+static void db88f5281_7seg_event(unsigned long data)
+{
+ static int count = 0;
+ writel(0, db88f5281_7seg + (count << 4));
+ count = (count + 1) & 7;
+ mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
+}
+
+static int __init db88f5281_7seg_init(void)
+{
+ if (machine_is_db88f5281()) {
+ db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE,
+ DB88F5281_7SEG_SIZE);
+ if (!db88f5281_7seg) {
+ printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n");
+ return -EIO;
+ }
+ setup_timer(&db88f5281_timer, db88f5281_7seg_event, 0);
+ mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
+ }
+
+ return 0;
+}
+
+__initcall(db88f5281_7seg_init);
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+void __init db88f5281_pci_preinit(void)
+{
+ int pin;
+
+ /*
+ * Configure PCI GPIO IRQ pins
+ */
+ pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
+ if (gpio_request(pin, "PCI Int1") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+ } else {
+ printk(KERN_ERR "db88f5281_pci_preinit faield to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
+ }
+
+ pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
+ if (gpio_request(pin, "PCI Int2") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+ } else {
+ printk(KERN_ERR "db88f5281_pci_preinit faield "
+ "to set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
+ }
+}
+
+static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ /*
+ * PCIE IRQ is connected internally (not GPIO)
+ */
+ if (dev->bus->number == orion_pcie_local_bus_nr())
+ return IRQ_ORION_PCIE0_INT;
+
+ /*
+ * PCI IRQs are connected via GPIOs
+ */
+ switch (slot - DB88F5281_PCI_SLOT0_OFFS) {
+ case 0:
+ return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN);
+ case 1:
+ case 2:
+ return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN);
+ default:
+ return -1;
+ }
+}
+
+static struct hw_pci db88f5281_pci __initdata = {
+ .nr_controllers = 2,
+ .preinit = db88f5281_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = orion_pci_sys_setup,
+ .scan = orion_pci_sys_scan_bus,
+ .map_irq = db88f5281_pci_map_irq,
+};
+
+static int __init db88f5281_pci_init(void)
+{
+ if (machine_is_db88f5281())
+ pci_common_init(&db88f5281_pci);
+
+ return 0;
+}
+
+subsys_initcall(db88f5281_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+static struct mv643xx_eth_platform_data db88f5281_eth_data = {
+ .phy_addr = 8,
+ .force_phy_addr = 1,
+};
+
+/*****************************************************************************
+ * RTC DS1339 on I2C bus
+ ****************************************************************************/
+static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
+ .driver_name = "rtc-ds1307",
+ .type = "ds1339",
+ .addr = 0x68,
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct platform_device *db88f5281_devs[] __initdata = {
+ &db88f5281_boot_flash,
+ &db88f5281_nor_flash,
+ &db88f5281_nand_flash,
+};
+
+static void __init db88f5281_init(void)
+{
+ /*
+ * Basic Orion setup. Need to be called early.
+ */
+ orion_init();
+
+ /*
+ * Setup the CPU address decode windows for our on-board devices
+ */
+ orion_setup_cpu_win(ORION_DEV_BOOT, DB88F5281_NOR_BOOT_BASE,
+ DB88F5281_NOR_BOOT_SIZE, -1);
+ orion_setup_cpu_win(ORION_DEV0, DB88F5281_7SEG_BASE,
+ DB88F5281_7SEG_SIZE, -1);
+ orion_setup_cpu_win(ORION_DEV1, DB88F5281_NOR_BASE,
+ DB88F5281_NOR_SIZE, -1);
+ orion_setup_cpu_win(ORION_DEV2, DB88F5281_NAND_BASE,
+ DB88F5281_NAND_SIZE, -1);
+
+ /*
+ * Setup Multiplexing Pins:
+ * MPP0: GPIO (USB Over Current) MPP1: GPIO (USB Vbat input)
+ * MPP2: PCI_REQn[2] MPP3: PCI_GNTn[2]
+ * MPP4: PCI_REQn[3] MPP5: PCI_GNTn[3]
+ * MPP6: GPIO (JP0, CON17.2) MPP7: GPIO (JP1, CON17.1)
+ * MPP8: GPIO (JP2, CON11.2) MPP9: GPIO (JP3, CON11.3)
+ * MPP10: GPIO (RTC int) MPP11: GPIO (Baud Rate Generator)
+ * MPP12: GPIO (PCI int 1) MPP13: GPIO (PCI int 2)
+ * MPP14: NAND_REn[2] MPP15: NAND_WEn[2]
+ * MPP16: UART1_RX MPP17: UART1_TX
+ * MPP18: UART1_CTS MPP19: UART1_RTS
+ * MPP-DEV: DEV_D[16:31]
+ */
+ orion_write(MPP_0_7_CTRL, 0x00222203);
+ orion_write(MPP_8_15_CTRL, 0x44000000);
+ orion_write(MPP_16_19_CTRL, 0);
+ orion_write(MPP_DEV_CTRL, 0);
+
+ orion_gpio_set_valid_pins(0x00003fc3);
+
+ platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs));
+ i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
+ orion_eth_init(&db88f5281_eth_data);
+}
+
+MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
+ /* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
+ .phys_io = ORION_REGS_BASE,
+ .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = db88f5281_init,
+ .map_io = orion_map_io,
+ .init_irq = orion_init_irq,
+ .timer = &orion_timer,
+MACHINE_END
diff --git a/arch/arm/mach-orion/dns323-setup.c b/arch/arm/mach-orion/dns323-setup.c
new file mode 100644
index 0000000..c8a806f
--- /dev/null
+++ b/arch/arm/mach-orion/dns323-setup.c
@@ -0,0 +1,322 @@
+/*
+ * arch/arm/mach-orion/dns323-setup.c
+ *
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion.h>
+#include <asm/arch/platform.h>
+#include "common.h"
+
+#define DNS323_GPIO_LED_RIGHT_AMBER 1
+#define DNS323_GPIO_LED_LEFT_AMBER 2
+#define DNS323_GPIO_LED_POWER 5
+#define DNS323_GPIO_OVERTEMP 6
+#define DNS323_GPIO_RTC 7
+#define DNS323_GPIO_POWER_OFF 8
+#define DNS323_GPIO_KEY_POWER 9
+#define DNS323_GPIO_KEY_RESET 10
+
+/****************************************************************************
+ * PCI setup
+ */
+
+static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ /* PCI-E */
+ if (dev->bus->number == orion_pcie_local_bus_nr())
+ return IRQ_ORION_PCIE0_INT;
+
+ pr_err("%s: requested mapping for unknown bus\n", __func__);
+
+ return -1;
+}
+
+static struct hw_pci dns323_pci __initdata = {
+ .nr_controllers = 1,
+ .swizzle = pci_std_swizzle,
+ .setup = orion_pci_sys_setup,
+ .scan = orion_pci_sys_scan_bus,
+ .map_irq = dns323_pci_map_irq,
+};
+
+static int __init dns323_pci_init(void)
+{
+ if (machine_is_dns323())
+ pci_common_init(&dns323_pci);
+
+ return 0;
+}
+
+subsys_initcall(dns323_pci_init);
+
+/****************************************************************************
+ * Ethernet
+ */
+
+static struct mv643xx_eth_platform_data dns323_eth_data = {
+ .phy_addr = 8,
+ .force_phy_addr = 1,
+};
+
+/****************************************************************************
+ * 8MiB NOR flash (Spansion S29GL064M90TFIR4)
+ *
+ * Layout as used by D-Link:
+ * 0x00000000-0x00010000 : "MTD1"
+ * 0x00010000-0x00020000 : "MTD2"
+ * 0x00020000-0x001a0000 : "Linux Kernel"
+ * 0x001a0000-0x007d0000 : "File System"
+ * 0x007d0000-0x00800000 : "u-boot"
+ */
+
+#define DNS323_NOR_BOOT_BASE 0xf4000000
+#define DNS323_NOR_BOOT_SIZE SZ_8M
+
+static struct mtd_partition dns323_partitions[] = {
+ {
+ .name = "MTD1",
+ .size = 0x00010000,
+ .offset = 0,
+ }, {
+ .name = "MTD2",
+ .size = 0x00010000,
+ .offset = 0x00010000,
+ }, {
+ .name = "Linux Kernel",
+ .size = 0x00180000,
+ .offset = 0x00020000,
+ }, {
+ .name = "File System",
+ .size = 0x00630000,
+ .offset = 0x001A0000,
+ }, {
+ .name = "u-boot",
+ .size = 0x00030000,
+ .offset = 0x007d0000,
+ }
+};
+
+static struct physmap_flash_data dns323_nor_flash_data = {
+ .width = 1,
+ .parts = dns323_partitions,
+ .nr_parts = ARRAY_SIZE(dns323_partitions)
+};
+
+static struct resource dns323_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = DNS323_NOR_BOOT_BASE,
+ .end = DNS323_NOR_BOOT_BASE + DNS323_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device dns323_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = { .platform_data = &dns323_nor_flash_data, },
+ .resource = &dns323_nor_flash_resource,
+ .num_resources = 1,
+};
+
+/****************************************************************************
+ * GPIO LEDs (simple - doesn't use hardware blinking support)
+ */
+
+static struct gpio_led dns323_leds[] = {
+ {
+ .name = "power:blue",
+ .gpio = DNS323_GPIO_LED_POWER,
+ .active_low = 1,
+ }, {
+ .name = "right:amber",
+ .gpio = DNS323_GPIO_LED_RIGHT_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "left:amber",
+ .gpio = DNS323_GPIO_LED_LEFT_AMBER,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data dns323_led_data = {
+ .num_leds = ARRAY_SIZE(dns323_leds),
+ .leds = dns323_leds,
+};
+
+static struct platform_device dns323_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = { .platform_data = &dns323_led_data, },
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ */
+
+static struct gpio_keys_button dns323_buttons[] = {
+ {
+ .code = KEY_RESTART,
+ .gpio = DNS323_GPIO_KEY_RESET,
+ .desc = "Reset Button",
+ .active_low = 1,
+ },
+ {
+ .code = KEY_POWER,
+ .gpio = DNS323_GPIO_KEY_POWER,
+ .desc = "Power Button",
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_platform_data dns323_button_data = {
+ .buttons = dns323_buttons,
+ .nbuttons = ARRAY_SIZE(dns323_buttons),
+};
+
+static struct platform_device dns323_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = { .platform_data = &dns323_button_data, },
+};
+
+/****************************************************************************
+ * General Setup
+ */
+
+static struct platform_device *dns323_plat_devices[] __initdata = {
+ &dns323_nor_flash,
+ &dns323_gpio_leds,
+ &dns323_button_device,
+};
+
+/*
+ * On the DNS-323 the following devices are attached via I2C:
+ *
+ * i2c addr | chip | description
+ * 0x3e | GMT G760Af | fan speed PWM controller
+ * 0x48 | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible)
+ * 0x68 | ST M41T80 | RTC w/ alarm
+ */
+static struct i2c_board_info __initdata dns323_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("g760a", 0x3e),
+ .type = "g760a",
+ },
+#if 0
+ /* this entry requires the new-style driver model lm75 driver,
+ * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */
+ {
+ I2C_BOARD_INFO("lm75", 0x48),
+ .type = "g751",
+ },
+#endif
+ {
+ I2C_BOARD_INFO("rtc-m41t80", 0x68),
+ .type = "m41t80",
+ }
+};
+
+/* DNS-323 specific power off method */
+static void dns323_power_off(void)
+{
+ pr_info("%s: triggering power-off...\n", __func__);
+ gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
+}
+
+static void __init dns323_init(void)
+{
+ /* Setup basic Orion functions. Need to be called early. */
+ orion_init();
+
+ /* setup flash mapping
+ * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
+ */
+ orion_setup_cpu_win(ORION_DEV_BOOT, DNS323_NOR_BOOT_BASE,
+ DNS323_NOR_BOOT_SIZE, -1);
+
+ /* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIE
+ *
+ * Open a special address decode windows for the PCIE WA.
+ */
+ orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE);
+ orion_write(ORION_REGS_BASE | 0x20070,
+ (0x7941 | (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
+
+ /* set MPP to 0 as D-Link's 2.6.12.6 kernel did */
+ orion_write(MPP_0_7_CTRL, 0);
+ orion_write(MPP_8_15_CTRL, 0);
+ orion_write(MPP_16_19_CTRL, 0);
+ orion_write(MPP_DEV_CTRL, 0);
+
+ /* Define used GPIO pins
+
+ GPIO Map:
+
+ | 0 | | PEX_RST_OUT (not controlled by GPIO)
+ | 1 | Out | right amber LED (= sata ch0 LED) (low-active)
+ | 2 | Out | left amber LED (= sata ch1 LED) (low-active)
+ | 3 | Out | //unknown//
+ | 4 | Out | power button LED (low-active, together with pin #5)
+ | 5 | Out | power button LED (low-active, together with pin #4)
+ | 6 | In | GMT G751-2f overtemp. shutdown signal (low-active)
+ | 7 | In | M41T80 nIRQ/OUT/SQW signal
+ | 8 | Out | triggers power off (high-active)
+ | 9 | In | power button switch (low-active)
+ | 10 | In | reset button switch (low-active)
+ | 11 | Out | //unknown//
+ | 12 | Out | //unknown//
+ | 13 | Out | //unknown//
+ | 14 | Out | //unknown//
+ | 15 | Out | //unknown//
+ */
+ orion_gpio_set_valid_pins(0x07f6);
+
+ /* register dns323 specific power-off method */
+ if ((gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0)
+ || (gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0))
+ pr_err("DNS323: failed to setup power-off GPIO\n");
+
+ pm_power_off = dns323_power_off;
+
+ /* register flash and other platform devices */
+ platform_add_devices(dns323_plat_devices,
+ ARRAY_SIZE(dns323_plat_devices));
+
+ i2c_register_board_info(0, dns323_i2c_devices,
+ ARRAY_SIZE(dns323_i2c_devices));
+
+ orion_eth_init(&dns323_eth_data);
+}
+
+/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
+MACHINE_START(DNS323, "D-Link DNS-323")
+ /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
+ .phys_io = ORION_REGS_BASE,
+ .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = dns323_init,
+ .map_io = orion_map_io,
+ .init_irq = orion_init_irq,
+ .timer = &orion_timer,
+MACHINE_END
diff --git a/arch/arm/mach-orion/gpio.c b/arch/arm/mach-orion/gpio.c
new file mode 100644
index 0000000..d5f00c8
--- /dev/null
+++ b/arch/arm/mach-orion/gpio.c
@@ -0,0 +1,225 @@
+/*
+ * arch/arm/mach-orion/gpio.c
+ *
+ * GPIO functions for Marvell Orion System On Chip
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+#include <asm/gpio.h>
+#include <asm/arch/orion.h>
+#include "common.h"
+
+static DEFINE_SPINLOCK(gpio_lock);
+static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)];
+static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */
+
+void __init orion_gpio_set_valid_pins(u32 pins)
+{
+ gpio_valid[0] = pins;
+}
+
+/*
+ * GENERIC_GPIO primitives
+ */
+int gpio_direction_input(unsigned pin)
+{
+ unsigned long flags;
+
+ if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ /*
+ * Some callers might have not used the gpio_request(),
+ * so flag this pin as requested now.
+ */
+ if (!gpio_label[pin])
+ gpio_label[pin] = "?";
+
+ orion_setbits(GPIO_IO_CONF, 1 << pin);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+int gpio_direction_output(unsigned pin, int value)
+{
+ unsigned long flags;
+ int mask;
+
+ if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ /*
+ * Some callers might have not used the gpio_request(),
+ * so flag this pin as requested now.
+ */
+ if (!gpio_label[pin])
+ gpio_label[pin] = "?";
+
+ mask = 1 << pin;
+ orion_clrbits(GPIO_BLINK_EN, mask);
+ if (value)
+ orion_setbits(GPIO_OUT, mask);
+ else
+ orion_clrbits(GPIO_OUT, mask);
+ orion_clrbits(GPIO_IO_CONF, mask);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+int gpio_get_value(unsigned pin)
+{
+ int val, mask = 1 << pin;
+
+ if (orion_read(GPIO_IO_CONF) & mask)
+ val = orion_read(GPIO_DATA_IN) ^ orion_read(GPIO_IN_POL);
+ else
+ val = orion_read(GPIO_OUT);
+
+ return val & mask;
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+void gpio_set_value(unsigned pin, int value)
+{
+ unsigned long flags;
+ int mask = 1 << pin;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ orion_clrbits(GPIO_BLINK_EN, mask);
+ if (value)
+ orion_setbits(GPIO_OUT, mask);
+ else
+ orion_clrbits(GPIO_OUT, mask);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+void orion_gpio_set_blink(unsigned pin, int blink)
+{
+ unsigned long flags;
+ int mask = 1 << pin;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ orion_clrbits(GPIO_OUT, mask);
+ if (blink)
+ orion_setbits(GPIO_BLINK_EN, mask);
+ else
+ orion_clrbits(GPIO_BLINK_EN, mask);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+}
+EXPORT_SYMBOL(orion_gpio_set_blink);
+
+int gpio_request(unsigned pin, const char *label)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ if (gpio_label[pin]) {
+ pr_debug("%s: GPIO %d already used as %s\n",
+ __FUNCTION__, pin, gpio_label[pin]);
+ ret = -EBUSY;
+ } else
+ gpio_label[pin] = label ? label : "?";
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned pin)
+{
+ if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+ return;
+ }
+
+ if (!gpio_label[pin])
+ pr_warning("%s: GPIO %d already freed\n", __FUNCTION__, pin);
+ else
+ gpio_label[pin] = NULL;
+}
+EXPORT_SYMBOL(gpio_free);
+
+/* Debug helper */
+void gpio_display(void)
+{
+ int i;
+
+ for (i = 0; i < GPIO_MAX; i++) {
+ printk(KERN_DEBUG "Pin-%d: ", i);
+
+ if (!test_bit(i, gpio_valid)) {
+ printk("non-GPIO\n");
+ } else if (!gpio_label[i]) {
+ printk("GPIO, free\n");
+ } else {
+ printk("GPIO, used by %s, ", gpio_label[i]);
+ if (orion_read(GPIO_IO_CONF) & (1 << i)) {
+ printk("input, active %s, level %s, edge %s\n",
+ ((orion_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high",
+ ((orion_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked",
+ ((orion_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked");
+ } else {
+ printk("output, val=%d\n", (orion_read(GPIO_OUT) >> i) & 1);
+ }
+ }
+ }
+
+ printk(KERN_DEBUG "MPP_0_7_CTRL (0x%08x) = 0x%08x\n",
+ MPP_0_7_CTRL, orion_read(MPP_0_7_CTRL));
+ printk(KERN_DEBUG "MPP_8_15_CTRL (0x%08x) = 0x%08x\n",
+ MPP_8_15_CTRL, orion_read(MPP_8_15_CTRL));
+ printk(KERN_DEBUG "MPP_16_19_CTRL (0x%08x) = 0x%08x\n",
+ MPP_16_19_CTRL, orion_read(MPP_16_19_CTRL));
+ printk(KERN_DEBUG "MPP_DEV_CTRL (0x%08x) = 0x%08x\n",
+ MPP_DEV_CTRL, orion_read(MPP_DEV_CTRL));
+ printk(KERN_DEBUG "GPIO_OUT (0x%08x) = 0x%08x\n",
+ GPIO_OUT, orion_read(GPIO_OUT));
+ printk(KERN_DEBUG "GPIO_IO_CONF (0x%08x) = 0x%08x\n",
+ GPIO_IO_CONF, orion_read(GPIO_IO_CONF));
+ printk(KERN_DEBUG "GPIO_BLINK_EN (0x%08x) = 0x%08x\n",
+ GPIO_BLINK_EN, orion_read(GPIO_BLINK_EN));
+ printk(KERN_DEBUG "GPIO_IN_POL (0x%08x) = 0x%08x\n",
+ GPIO_IN_POL, orion_read(GPIO_IN_POL));
+ printk(KERN_DEBUG "GPIO_DATA_IN (0x%08x) = 0x%08x\n",
+ GPIO_DATA_IN, orion_read(GPIO_DATA_IN));
+ printk(KERN_DEBUG "GPIO_LEVEL_MASK (0x%08x) = 0x%08x\n",
+ GPIO_LEVEL_MASK, orion_read(GPIO_LEVEL_MASK));
+ printk(KERN_DEBUG "GPIO_EDGE_CAUSE (0x%08x) = 0x%08x\n",
+ GPIO_EDGE_CAUSE, orion_read(GPIO_EDGE_CAUSE));
+ printk(KERN_DEBUG "GPIO_EDGE_MASK (0x%08x) = 0x%08x\n",
+ GPIO_EDGE_MASK, orion_read(GPIO_EDGE_MASK));
+}
diff --git a/arch/arm/mach-orion/irq.c b/arch/arm/mach-orion/irq.c
new file mode 100644
index 0000000..df7e12a
--- /dev/null
+++ b/arch/arm/mach-orion/irq.c
@@ -0,0 +1,241 @@
+/*
+ * arch/arm/mach-orion/irq.c
+ *
+ * Core IRQ functions for Marvell Orion System On Chip
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/gpio.h>
+#include <asm/arch/orion.h>
+#include "common.h"
+
+/*****************************************************************************
+ * Orion GPIO IRQ
+ *
+ * GPIO_IN_POL register controlls whether GPIO_DATA_IN will hold the same
+ * value of the line or the opposite value.
+ *
+ * Level IRQ handlers: DATA_IN is used directly as cause register.
+ * Interrupt are masked by LEVEL_MASK registers.
+ * Edge IRQ handlers: Change in DATA_IN are latched in EDGE_CAUSE.
+ * Interrupt are masked by EDGE_MASK registers.
+ * Both-edge handlers: Similar to regular Edge handlers, but also swaps
+ * the polarity to catch the next line transaction.
+ * This is a race condition that might not perfectly
+ * work on some use cases.
+ *
+ * Every eight GPIO lines are grouped (OR'ed) before going up to main
+ * cause register.
+ *
+ * EDGE cause mask
+ * data-in /--------| |-----| |----\
+ * -----| |----- ---- to main cause reg
+ * X \----------------| |----/
+ * polarity LEVEL mask
+ *
+ ****************************************************************************/
+static void orion_gpio_irq_ack(u32 irq)
+{
+ int pin = irq_to_gpio(irq);
+ if (irq_desc[irq].status & IRQ_LEVEL)
+ /*
+ * Mask bit for level interrupt
+ */
+ orion_clrbits(GPIO_LEVEL_MASK, 1 << pin);
+ else
+ /*
+ * Clear casue bit for egde interrupt
+ */
+ orion_clrbits(GPIO_EDGE_CAUSE, 1 << pin);
+}
+
+static void orion_gpio_irq_mask(u32 irq)
+{
+ int pin = irq_to_gpio(irq);
+ if (irq_desc[irq].status & IRQ_LEVEL)
+ orion_clrbits(GPIO_LEVEL_MASK, 1 << pin);
+ else
+ orion_clrbits(GPIO_EDGE_MASK, 1 << pin);
+}
+
+static void orion_gpio_irq_unmask(u32 irq)
+{
+ int pin = irq_to_gpio(irq);
+ if (irq_desc[irq].status & IRQ_LEVEL)
+ orion_setbits(GPIO_LEVEL_MASK, 1 << pin);
+ else
+ orion_setbits(GPIO_EDGE_MASK, 1 << pin);
+}
+
+static int orion_gpio_set_irq_type(u32 irq, u32 type)
+{
+ int pin = irq_to_gpio(irq);
+ struct irq_desc *desc;
+
+ if ((orion_read(GPIO_IO_CONF) & (1 << pin)) == 0) {
+ printk(KERN_ERR "orion_gpio_set_irq_type failed "
+ "(irq %d, pin %d).\n", irq, pin);
+ return -EINVAL;
+ }
+
+ desc = irq_desc + irq;
+
+ switch (type) {
+ case IRQT_HIGH:
+ desc->handle_irq = handle_level_irq;
+ desc->status |= IRQ_LEVEL;
+ orion_clrbits(GPIO_IN_POL, (1 << pin));
+ break;
+ case IRQT_LOW:
+ desc->handle_irq = handle_level_irq;
+ desc->status |= IRQ_LEVEL;
+ orion_setbits(GPIO_IN_POL, (1 << pin));
+ break;
+ case IRQT_RISING:
+ desc->handle_irq = handle_edge_irq;
+ desc->status &= ~IRQ_LEVEL;
+ orion_clrbits(GPIO_IN_POL, (1 << pin));
+ break;
+ case IRQT_FALLING:
+ desc->handle_irq = handle_edge_irq;
+ desc->status &= ~IRQ_LEVEL;
+ orion_setbits(GPIO_IN_POL, (1 << pin));
+ break;
+ case IRQT_BOTHEDGE:
+ desc->handle_irq = handle_edge_irq;
+ desc->status &= ~IRQ_LEVEL;
+ /*
+ * set initial polarity based on current input level
+ */
+ if ((orion_read(GPIO_IN_POL) ^ orion_read(GPIO_DATA_IN))
+ & (1 << pin))
+ orion_setbits(GPIO_IN_POL, (1 << pin)); /* falling */
+ else
+ orion_clrbits(GPIO_IN_POL, (1 << pin)); /* rising */
+
+ break;
+ default:
+ printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type);
+ return -EINVAL;
+ }
+
+ desc->status &= ~IRQ_TYPE_SENSE_MASK;
+ desc->status |= type & IRQ_TYPE_SENSE_MASK;
+
+ return 0;
+}
+
+static struct irq_chip orion_gpio_irq_chip = {
+ .name = "Orion-IRQ-GPIO",
+ .ack = orion_gpio_irq_ack,
+ .mask = orion_gpio_irq_mask,
+ .unmask = orion_gpio_irq_unmask,
+ .set_type = orion_gpio_set_irq_type,
+};
+
+static void orion_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ u32 cause, offs, pin;
+
+ BUG_ON(irq < IRQ_ORION_GPIO_0_7 || irq > IRQ_ORION_GPIO_24_31);
+ offs = (irq - IRQ_ORION_GPIO_0_7) * 8;
+ cause = (orion_read(GPIO_DATA_IN) & orion_read(GPIO_LEVEL_MASK)) |
+ (orion_read(GPIO_EDGE_CAUSE) & orion_read(GPIO_EDGE_MASK));
+
+ for (pin = offs; pin < offs + 8; pin++) {
+ if (cause & (1 << pin)) {
+ irq = gpio_to_irq(pin);
+ desc = irq_desc + irq;
+ if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
+ /* Swap polarity (race with GPIO line) */
+ u32 polarity = orion_read(GPIO_IN_POL);
+ polarity ^= 1 << pin;
+ orion_write(GPIO_IN_POL, polarity);
+ }
+ desc_handle_irq(irq, desc);
+ }
+ }
+}
+
+static void __init orion_init_gpio_irq(void)
+{
+ int i;
+ struct irq_desc *desc;
+
+ /*
+ * Mask and clear GPIO IRQ interrupts
+ */
+ orion_write(GPIO_LEVEL_MASK, 0x0);
+ orion_write(GPIO_EDGE_MASK, 0x0);
+ orion_write(GPIO_EDGE_CAUSE, 0x0);
+
+ /*
+ * Register chained level handlers for GPIO IRQs by default.
+ * User can use set_type() if he wants to use edge types handlers.
+ */
+ for (i = IRQ_ORION_GPIO_START; i < NR_IRQS; i++) {
+ set_irq_chip(i, &orion_gpio_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ desc = irq_desc + i;
+ desc->status |= IRQ_LEVEL;
+ set_irq_flags(i, IRQF_VALID);
+ }
+ set_irq_chained_handler(IRQ_ORION_GPIO_0_7, orion_gpio_irq_handler);
+ set_irq_chained_handler(IRQ_ORION_GPIO_8_15, orion_gpio_irq_handler);
+ set_irq_chained_handler(IRQ_ORION_GPIO_16_23, orion_gpio_irq_handler);
+ set_irq_chained_handler(IRQ_ORION_GPIO_24_31, orion_gpio_irq_handler);
+}
+
+/*****************************************************************************
+ * Orion Main IRQ
+ ****************************************************************************/
+static void orion_main_irq_mask(u32 irq)
+{
+ orion_clrbits(MAIN_IRQ_MASK, 1 << irq);
+}
+
+static void orion_main_irq_unmask(u32 irq)
+{
+ orion_setbits(MAIN_IRQ_MASK, 1 << irq);
+}
+
+static struct irq_chip orion_main_irq_chip = {
+ .name = "Orion-IRQ-Main",
+ .ack = orion_main_irq_mask,
+ .mask = orion_main_irq_mask,
+ .unmask = orion_main_irq_unmask,
+};
+
+static void __init orion_init_main_irq(void)
+{
+ int i;
+
+ /*
+ * Mask and clear Main IRQ interrupts
+ */
+ orion_write(MAIN_IRQ_MASK, 0x0);
+ orion_write(MAIN_IRQ_CAUSE, 0x0);
+
+ /*
+ * Register level handler for Main IRQs
+ */
+ for (i = 0; i < IRQ_ORION_GPIO_START; i++) {
+ set_irq_chip(i, &orion_main_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+}
+
+void __init orion_init_irq(void)
+{
+ orion_init_main_irq();
+ orion_init_gpio_irq();
+}
diff --git a/arch/arm/mach-orion/kurobox_pro-setup.c b/arch/arm/mach-orion/kurobox_pro-setup.c
new file mode 100644
index 0000000..2d812ed
--- /dev/null
+++ b/arch/arm/mach-orion/kurobox_pro-setup.c
@@ -0,0 +1,234 @@
+/*
+ * arch/arm/mach-orion/kurobox_pro-setup.c
+ *
+ * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion.h>
+#include <asm/arch/platform.h>
+#include "common.h"
+
+/*****************************************************************************
+ * KUROBOX-PRO Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define KUROBOX_PRO_NOR_BOOT_BASE 0xf4000000
+#define KUROBOX_PRO_NOR_BOOT_SIZE SZ_256K
+
+/*
+ * 256M NAND flash on Device bus chip select 1
+ */
+
+#define KUROBOX_PRO_NAND_BASE 0xfc000000
+#define KUROBOX_PRO_NAND_SIZE SZ_2M
+
+/*****************************************************************************
+ * 256MB NAND Flash on Device bus CS0
+ ****************************************************************************/
+
+static struct mtd_partition kurobox_pro_nand_parts[] = {
+ {
+ .name = "uImage",
+ .offset = 0,
+ .size = SZ_4M,
+ },
+ {
+ .name = "rootfs",
+ .offset = SZ_4M,
+ .size = SZ_64M,
+ },
+ {
+ .name = "extra",
+ .offset = SZ_4M + SZ_64M,
+ .size = SZ_256M - (SZ_4M + SZ_64M),
+ },
+};
+
+static struct resource kurobox_pro_nand_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = KUROBOX_PRO_NAND_BASE,
+ .end = KUROBOX_PRO_NAND_BASE + KUROBOX_PRO_NAND_SIZE - 1,
+};
+
+static struct orion_nand_data kurobox_pro_nand_data = {
+ .parts = kurobox_pro_nand_parts,
+ .nr_parts = ARRAY_SIZE(kurobox_pro_nand_parts),
+ .cle = 0,
+ .ale = 1,
+ .width = 8,
+};
+
+static struct platform_device kurobox_pro_nand_flash = {
+ .name = "orion_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &kurobox_pro_nand_data,
+ },
+ .resource = &kurobox_pro_nand_resource,
+ .num_resources = 1,
+};
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data kurobox_pro_nor_flash_data = {
+ .width = 1,
+};
+
+static struct resource kurobox_pro_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = KUROBOX_PRO_NOR_BOOT_BASE,
+ .end = KUROBOX_PRO_NOR_BOOT_BASE + KUROBOX_PRO_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device kurobox_pro_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &kurobox_pro_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &kurobox_pro_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ /*
+ * PCI isn't used on the Kuro
+ */
+ if (dev->bus->number == orion_pcie_local_bus_nr())
+ return IRQ_ORION_PCIE0_INT;
+ else
+ printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
+
+ return -1;
+}
+
+static struct hw_pci kurobox_pro_pci __initdata = {
+ .nr_controllers = 1,
+ .swizzle = pci_std_swizzle,
+ .setup = orion_pci_sys_setup,
+ .scan = orion_pci_sys_scan_bus,
+ .map_irq = kurobox_pro_pci_map_irq,
+};
+
+static int __init kurobox_pro_pci_init(void)
+{
+ if (machine_is_kurobox_pro())
+ pci_common_init(&kurobox_pro_pci);
+
+ return 0;
+}
+
+subsys_initcall(kurobox_pro_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data kurobox_pro_eth_data = {
+ .phy_addr = 8,
+ .force_phy_addr = 1,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = {
+ .driver_name = "rtc-rs5c372",
+ .type = "rs5c372a",
+ .addr = 0x32,
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct platform_device *kurobox_pro_devices[] __initdata = {
+ &kurobox_pro_nor_flash,
+ &kurobox_pro_nand_flash,
+};
+
+static void __init kurobox_pro_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion_init();
+
+ /*
+ * Setup the CPU address decode windows for our devices
+ */
+ orion_setup_cpu_win(ORION_DEV_BOOT, KUROBOX_PRO_NOR_BOOT_BASE,
+ KUROBOX_PRO_NOR_BOOT_SIZE, -1);
+ orion_setup_cpu_win(ORION_DEV0, KUROBOX_PRO_NAND_BASE,
+ KUROBOX_PRO_NAND_SIZE, -1);
+ /*
+ * Open a special address decode windows for the PCIE WA.
+ */
+ orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE);
+ orion_write(ORION_REGS_BASE | 0x20070, (0x7941 |
+ (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
+
+ /*
+ * Setup Multiplexing Pins --
+ * MPP[0-1] Not used
+ * MPP[2] GPIO Micon
+ * MPP[3] GPIO RTC
+ * MPP[4-5] Not used
+ * MPP[6] Nand Flash REn
+ * MPP[7] Nand Flash WEn
+ * MPP[8-11] Not used
+ * MPP[12] SATA 0 presence Indication
+ * MPP[13] SATA 1 presence Indication
+ * MPP[14] SATA 0 active Indication
+ * MPP[15] SATA 1 active indication
+ * MPP[16-19] Not used
+ */
+ orion_write(MPP_0_7_CTRL, 0x44220003);
+ orion_write(MPP_8_15_CTRL, 0x55550000);
+ orion_write(MPP_16_19_CTRL, 0x0);
+
+ orion_gpio_set_valid_pins(0x0000000c);
+
+ platform_add_devices(kurobox_pro_devices, ARRAY_SIZE(kurobox_pro_devices));
+ i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
+ orion_eth_init(&kurobox_pro_eth_data);
+}
+
+MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
+ /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
+ .phys_io = ORION_REGS_BASE,
+ .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = kurobox_pro_init,
+ .map_io = orion_map_io,
+ .init_irq = orion_init_irq,
+ .timer = &orion_timer,
+MACHINE_END
diff --git a/arch/arm/mach-orion/pci.c b/arch/arm/mach-orion/pci.c
new file mode 100644
index 0000000..0498d7c
--- /dev/null
+++ b/arch/arm/mach-orion/pci.c
@@ -0,0 +1,557 @@
+/*
+ * arch/arm/mach-orion/pci.c
+ *
+ * PCI and PCIE functions for Marvell Orion System On Chip
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/mach/pci.h>
+#include "common.h"
+
+/*****************************************************************************
+ * Orion has one PCIE controller and one PCI controller.
+ *
+ * Note1: The local PCIE bus number is '0'. The local PCI bus number
+ * follows the scanned PCIE bridged busses, if any.
+ *
+ * Note2: It is possible for PCI/PCIE agents to access many subsystem's
+ * space, by configuring BARs and Address Decode Windows, e.g. flashes on
+ * device bus, Orion registers, etc. However this code only enable the
+ * access to DDR banks.
+ ****************************************************************************/
+
+
+/*****************************************************************************
+ * PCIE controller
+ ****************************************************************************/
+#define PCIE_CTRL ORION_PCIE_REG(0x1a00)
+#define PCIE_STAT ORION_PCIE_REG(0x1a04)
+#define PCIE_DEV_ID ORION_PCIE_REG(0x0000)
+#define PCIE_CMD_STAT ORION_PCIE_REG(0x0004)
+#define PCIE_DEV_REV ORION_PCIE_REG(0x0008)
+#define PCIE_MASK ORION_PCIE_REG(0x1910)
+#define PCIE_CONF_ADDR ORION_PCIE_REG(0x18f8)
+#define PCIE_CONF_DATA ORION_PCIE_REG(0x18fc)
+
+/*
+ * PCIE_STAT bits
+ */
+#define PCIE_STAT_LINK_DOWN 1
+#define PCIE_STAT_BUS_OFFS 8
+#define PCIE_STAT_BUS_MASK (0xff << PCIE_STAT_BUS_OFFS)
+#define PCIE_STAT_DEV_OFFS 20
+#define PCIE_STAT_DEV_MASK (0x1f << PCIE_STAT_DEV_OFFS)
+
+/*
+ * PCIE_CONF_ADDR bits
+ */
+#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 24) | ((r) & 0xfc))
+#define PCIE_CONF_FUNC(f) (((f) & 0x3) << 8)
+#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11)
+#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16)
+#define PCIE_CONF_ADDR_EN (1 << 31)
+
+/*
+ * PCIE config cycles are done by programming the PCIE_CONF_ADDR register
+ * and then reading the PCIE_CONF_DATA register. Need to make sure these
+ * transactions are atomic.
+ */
+static DEFINE_SPINLOCK(orion_pcie_lock);
+
+void orion_pcie_id(u32 *dev, u32 *rev)
+{
+ *dev = orion_read(PCIE_DEV_ID) >> 16;
+ *rev = orion_read(PCIE_DEV_REV) & 0xff;
+}
+
+u32 orion_pcie_local_bus_nr(void)
+{
+ u32 stat = orion_read(PCIE_STAT);
+ return((stat & PCIE_STAT_BUS_MASK) >> PCIE_STAT_BUS_OFFS);
+}
+
+static u32 orion_pcie_local_dev_nr(void)
+{
+ u32 stat = orion_read(PCIE_STAT);
+ return((stat & PCIE_STAT_DEV_MASK) >> PCIE_STAT_DEV_OFFS);
+}
+
+static u32 orion_pcie_no_link(void)
+{
+ u32 stat = orion_read(PCIE_STAT);
+ return(stat & PCIE_STAT_LINK_DOWN);
+}
+
+static void orion_pcie_set_bus_nr(int nr)
+{
+ orion_clrbits(PCIE_STAT, PCIE_STAT_BUS_MASK);
+ orion_setbits(PCIE_STAT, nr << PCIE_STAT_BUS_OFFS);
+}
+
+static void orion_pcie_master_slave_enable(void)
+{
+ orion_setbits(PCIE_CMD_STAT, PCI_COMMAND_MASTER |
+ PCI_COMMAND_IO |
+ PCI_COMMAND_MEMORY);
+}
+
+static void orion_pcie_enable_interrupts(void)
+{
+ /*
+ * Enable interrupts lines
+ * INTA[24] INTB[25] INTC[26] INTD[27]
+ */
+ orion_setbits(PCIE_MASK, 0xf<<24);
+}
+
+static int orion_pcie_valid_config(u32 bus, u32 dev)
+{
+ /*
+ * Don't go out when trying to access --
+ * 1. our own device
+ * 2. where there's no device connected (no link)
+ * 3. nonexisting devices on local bus
+ */
+
+ if ((orion_pcie_local_bus_nr() == bus) &&
+ (orion_pcie_local_dev_nr() == dev))
+ return 0;
+
+ if (orion_pcie_no_link())
+ return 0;
+
+ if (bus == orion_pcie_local_bus_nr())
+ if (((orion_pcie_local_dev_nr() == 0) && (dev != 1)) ||
+ ((orion_pcie_local_dev_nr() != 0) && (dev != 0)))
+ return 0;
+
+ return 1;
+}
+
+static int orion_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+ int size, u32 *val)
+{
+ unsigned long flags;
+ unsigned int dev, rev, pcie_addr;
+
+ if (orion_pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ spin_lock_irqsave(&orion_pcie_lock, flags);
+
+ orion_write(PCIE_CONF_ADDR, PCIE_CONF_BUS(bus->number) |
+ PCIE_CONF_DEV(PCI_SLOT(devfn)) |
+ PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
+ PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN);
+
+ orion_pcie_id(&dev, &rev);
+ if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) {
+ /* extended register space */
+ pcie_addr = ORION_PCIE_WA_BASE;
+ pcie_addr |= PCIE_CONF_BUS(bus->number) |
+ PCIE_CONF_DEV(PCI_SLOT(devfn)) |
+ PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
+ PCIE_CONF_REG(where);
+ *val = orion_read(pcie_addr);
+ } else
+ *val = orion_read(PCIE_CONF_DATA);
+
+ if (size == 1)
+ *val = (*val >> (8*(where & 0x3))) & 0xff;
+ else if (size == 2)
+ *val = (*val >> (8*(where & 0x3))) & 0xffff;
+
+ spin_unlock_irqrestore(&orion_pcie_lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int orion_pcie_wr_conf(struct pci_bus *bus, u32 devfn, int where,
+ int size, u32 val)
+{
+ unsigned long flags;
+ int ret;
+
+ if (orion_pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ spin_lock_irqsave(&orion_pcie_lock, flags);
+
+ ret = PCIBIOS_SUCCESSFUL;
+
+ orion_write(PCIE_CONF_ADDR, PCIE_CONF_BUS(bus->number) |
+ PCIE_CONF_DEV(PCI_SLOT(devfn)) |
+ PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
+ PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN);
+
+ if (size == 4) {
+ __raw_writel(val, PCIE_CONF_DATA);
+ } else if (size == 2) {
+ __raw_writew(val, PCIE_CONF_DATA + (where & 0x3));
+ } else if (size == 1) {
+ __raw_writeb(val, PCIE_CONF_DATA + (where & 0x3));
+ } else {
+ ret = PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ spin_unlock_irqrestore(&orion_pcie_lock, flags);
+
+ return ret;
+}
+
+struct pci_ops orion_pcie_ops = {
+ .read = orion_pcie_rd_conf,
+ .write = orion_pcie_wr_conf,
+};
+
+
+static int orion_pcie_setup(struct pci_sys_data *sys)
+{
+ struct resource *res;
+
+ /*
+ * Master + Slave enable
+ */
+ orion_pcie_master_slave_enable();
+
+ /*
+ * Enable interrupts lines A-D
+ */
+ orion_pcie_enable_interrupts();
+
+ /*
+ * Request resource
+ */
+ res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+ if (!res)
+ panic("orion_pci_setup unable to alloc resources");
+
+ /*
+ * IORESOURCE_IO
+ */
+ res[0].name = "PCI-EX I/O Space";
+ res[0].flags = IORESOURCE_IO;
+ res[0].start = ORION_PCIE_IO_REMAP;
+ res[0].end = res[0].start + ORION_PCIE_IO_SIZE - 1;
+ if (request_resource(&ioport_resource, &res[0]))
+ panic("Request PCIE IO resource failed\n");
+ sys->resource[0] = &res[0];
+
+ /*
+ * IORESOURCE_MEM
+ */
+ res[1].name = "PCI-EX Memory Space";
+ res[1].flags = IORESOURCE_MEM;
+ res[1].start = ORION_PCIE_MEM_BASE;
+ res[1].end = res[1].start + ORION_PCIE_MEM_SIZE - 1;
+ if (request_resource(&iomem_resource, &res[1]))
+ panic("Request PCIE Memory resource failed\n");
+ sys->resource[1] = &res[1];
+
+ sys->resource[2] = NULL;
+ sys->io_offset = 0;
+
+ return 1;
+}
+
+/*****************************************************************************
+ * PCI controller
+ ****************************************************************************/
+#define PCI_MODE ORION_PCI_REG(0xd00)
+#define PCI_CMD ORION_PCI_REG(0xc00)
+#define PCI_P2P_CONF ORION_PCI_REG(0x1d14)
+#define PCI_CONF_ADDR ORION_PCI_REG(0xc78)
+#define PCI_CONF_DATA ORION_PCI_REG(0xc7c)
+
+/*
+ * PCI_MODE bits
+ */
+#define PCI_MODE_64BIT (1 << 2)
+#define PCI_MODE_PCIX ((1 << 4) | (1 << 5))
+
+/*
+ * PCI_CMD bits
+ */
+#define PCI_CMD_HOST_REORDER (1 << 29)
+
+/*
+ * PCI_P2P_CONF bits
+ */
+#define PCI_P2P_BUS_OFFS 16
+#define PCI_P2P_BUS_MASK (0xff << PCI_P2P_BUS_OFFS)
+#define PCI_P2P_DEV_OFFS 24
+#define PCI_P2P_DEV_MASK (0x1f << PCI_P2P_DEV_OFFS)
+
+/*
+ * PCI_CONF_ADDR bits
+ */
+#define PCI_CONF_REG(reg) ((reg) & 0xfc)
+#define PCI_CONF_FUNC(func) (((func) & 0x3) << 8)
+#define PCI_CONF_DEV(dev) (((dev) & 0x1f) << 11)
+#define PCI_CONF_BUS(bus) (((bus) & 0xff) << 16)
+#define PCI_CONF_ADDR_EN (1 << 31)
+
+/*
+ * Internal configuration space
+ */
+#define PCI_CONF_FUNC_STAT_CMD 0
+#define PCI_CONF_REG_STAT_CMD 4
+#define PCIX_STAT 0x64
+#define PCIX_STAT_BUS_OFFS 8
+#define PCIX_STAT_BUS_MASK (0xff << PCIX_STAT_BUS_OFFS)
+
+/*
+ * PCI config cycles are done by programming the PCI_CONF_ADDR register
+ * and then reading the PCI_CONF_DATA register. Need to make sure these
+ * transactions are atomic.
+ */
+static DEFINE_SPINLOCK(orion_pci_lock);
+
+u32 orion_pci_local_bus_nr(void)
+{
+ u32 conf = orion_read(PCI_P2P_CONF);
+ return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS);
+}
+
+u32 orion_pci_local_dev_nr(void)
+{
+ u32 conf = orion_read(PCI_P2P_CONF);
+ return((conf & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS);
+}
+
+int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func,
+ u32 where, u32 size, u32 *val)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&orion_pci_lock, flags);
+
+ orion_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
+ PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
+ PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
+
+ *val = orion_read(PCI_CONF_DATA);
+
+ if (size == 1)
+ *val = (*val >> (8*(where & 0x3))) & 0xff;
+ else if (size == 2)
+ *val = (*val >> (8*(where & 0x3))) & 0xffff;
+
+ spin_unlock_irqrestore(&orion_pci_lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+int orion_pci_hw_wr_conf(u32 bus, u32 dev, u32 func,
+ u32 where, u32 size, u32 val)
+{
+ unsigned long flags;
+ int ret = PCIBIOS_SUCCESSFUL;
+
+ spin_lock_irqsave(&orion_pci_lock, flags);
+
+ orion_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
+ PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
+ PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
+
+ if (size == 4) {
+ __raw_writel(val, PCI_CONF_DATA);
+ } else if (size == 2) {
+ __raw_writew(val, PCI_CONF_DATA + (where & 0x3));
+ } else if (size == 1) {
+ __raw_writeb(val, PCI_CONF_DATA + (where & 0x3));
+ } else {
+ ret = PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ spin_unlock_irqrestore(&orion_pci_lock, flags);
+
+ return ret;
+}
+
+static int orion_pci_rd_conf(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 *val)
+{
+ /*
+ * Don't go out for local device
+ */
+ if ((orion_pci_local_bus_nr() == bus->number) &&
+ (orion_pci_local_dev_nr() == PCI_SLOT(devfn))) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ return orion_pci_hw_rd_conf(bus->number, PCI_SLOT(devfn),
+ PCI_FUNC(devfn), where, size, val);
+}
+
+static int orion_pci_wr_conf(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 val)
+{
+ /*
+ * Don't go out for local device
+ */
+ if ((orion_pci_local_bus_nr() == bus->number) &&
+ (orion_pci_local_dev_nr() == PCI_SLOT(devfn)))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return orion_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn),
+ PCI_FUNC(devfn), where, size, val);
+}
+
+struct pci_ops orion_pci_ops = {
+ .read = orion_pci_rd_conf,
+ .write = orion_pci_wr_conf,
+};
+
+static void orion_pci_set_bus_nr(int nr)
+{
+ u32 p2p = orion_read(PCI_P2P_CONF);
+
+ if (orion_read(PCI_MODE) & PCI_MODE_PCIX) {
+ /*
+ * PCI-X mode
+ */
+ u32 pcix_status, bus, dev;
+ bus = (p2p & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS;
+ dev = (p2p & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS;
+ orion_pci_hw_rd_conf(bus, dev, 0, PCIX_STAT, 4, &pcix_status);
+ pcix_status &= ~PCIX_STAT_BUS_MASK;
+ pcix_status |= (nr << PCIX_STAT_BUS_OFFS);
+ orion_pci_hw_wr_conf(bus, dev, 0, PCIX_STAT, 4, pcix_status);
+ } else {
+ /*
+ * PCI Conventional mode
+ */
+ p2p &= ~PCI_P2P_BUS_MASK;
+ p2p |= (nr << PCI_P2P_BUS_OFFS);
+ orion_write(PCI_P2P_CONF, p2p);
+ }
+}
+
+static void orion_pci_master_slave_enable(void)
+{
+ u32 bus_nr, dev_nr, func, reg, val;
+
+ bus_nr = orion_pci_local_bus_nr();
+ dev_nr = orion_pci_local_dev_nr();
+ func = PCI_CONF_FUNC_STAT_CMD;
+ reg = PCI_CONF_REG_STAT_CMD;
+ orion_pci_hw_rd_conf(bus_nr, dev_nr, func, reg, 4, &val);
+ val |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ orion_pci_hw_wr_conf(bus_nr, dev_nr, func, reg, 4, val | 0x7);
+}
+
+static int orion_pci_setup(struct pci_sys_data *sys)
+{
+ struct resource *res;
+
+ /*
+ * Master + Slave enable
+ */
+ orion_pci_master_slave_enable();
+
+ /*
+ * Force ordering
+ */
+ orion_setbits(PCI_CMD, PCI_CMD_HOST_REORDER);
+
+ /*
+ * Request resources
+ */
+ res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+ if (!res)
+ panic("orion_pci_setup unable to alloc resources");
+
+ /*
+ * IORESOURCE_IO
+ */
+ res[0].name = "PCI I/O Space";
+ res[0].flags = IORESOURCE_IO;
+ res[0].start = ORION_PCI_IO_REMAP;
+ res[0].end = res[0].start + ORION_PCI_IO_SIZE - 1;
+ if (request_resource(&ioport_resource, &res[0]))
+ panic("Request PCI IO resource failed\n");
+ sys->resource[0] = &res[0];
+
+ /*
+ * IORESOURCE_MEM
+ */
+ res[1].name = "PCI Memory Space";
+ res[1].flags = IORESOURCE_MEM;
+ res[1].start = ORION_PCI_MEM_BASE;
+ res[1].end = res[1].start + ORION_PCI_MEM_SIZE - 1;
+ if (request_resource(&iomem_resource, &res[1]))
+ panic("Request PCI Memory resource failed\n");
+ sys->resource[1] = &res[1];
+
+ sys->resource[2] = NULL;
+ sys->io_offset = 0;
+
+ return 1;
+}
+
+
+/*****************************************************************************
+ * General PCIE + PCI
+ ****************************************************************************/
+int orion_pci_sys_setup(int nr, struct pci_sys_data *sys)
+{
+ int ret = 0;
+
+ if (nr == 0) {
+ /*
+ * PCIE setup
+ */
+ orion_pcie_set_bus_nr(0);
+ ret = orion_pcie_setup(sys);
+ } else if (nr == 1) {
+ /*
+ * PCI setup
+ */
+ ret = orion_pci_setup(sys);
+ }
+
+ return ret;
+}
+
+struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys)
+{
+ struct pci_ops *ops;
+ struct pci_bus *bus;
+
+
+ if (nr == 0) {
+ u32 pci_bus;
+ /*
+ * PCIE scan
+ */
+ ops = &orion_pcie_ops;
+ bus = pci_scan_bus(sys->busnr, ops, sys);
+ /*
+ * Set local PCI bus number to follow PCIE bridges (if any)
+ */
+ pci_bus = bus->number + bus->subordinate - bus->secondary + 1;
+ orion_pci_set_bus_nr(pci_bus);
+ } else if (nr == 1) {
+ /*
+ * PCI scan
+ */
+ ops = &orion_pci_ops;
+ bus = pci_scan_bus(sys->busnr, ops, sys);
+ } else {
+ BUG();
+ bus = NULL;
+ }
+
+ return bus;
+}
diff --git a/arch/arm/mach-orion/rd88f5182-setup.c b/arch/arm/mach-orion/rd88f5182-setup.c
new file mode 100644
index 0000000..026d743
--- /dev/null
+++ b/arch/arm/mach-orion/rd88f5182-setup.c
@@ -0,0 +1,306 @@
+/*
+ * arch/arm/mach-orion/rd88f5182-setup.c
+ *
+ * Marvell Orion-NAS Reference Design Setup
+ *
+ * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/leds.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion.h>
+#include <asm/arch/platform.h>
+#include "common.h"
+
+/*****************************************************************************
+ * RD-88F5182 Info
+ ****************************************************************************/
+
+/*
+ * 512K NOR flash Device bus boot chip select
+ */
+
+#define RD88F5182_NOR_BOOT_BASE 0xf4000000
+#define RD88F5182_NOR_BOOT_SIZE SZ_512K
+
+/*
+ * 16M NOR flash on Device bus chip select 1
+ */
+
+#define RD88F5182_NOR_BASE 0xfc000000
+#define RD88F5182_NOR_SIZE SZ_16M
+
+/*
+ * PCI
+ */
+
+#define RD88F5182_PCI_SLOT0_OFFS 7
+#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7
+#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6
+
+/*
+ * GPIO Debug LED
+ */
+
+#define RD88F5182_GPIO_DBG_LED 0
+
+/*****************************************************************************
+ * 16M NOR Flash on Device bus CS1
+ ****************************************************************************/
+
+static struct physmap_flash_data rd88f5182_nor_flash_data = {
+ .width = 1,
+};
+
+static struct resource rd88f5182_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = RD88F5182_NOR_BASE,
+ .end = RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1,
+};
+
+static struct platform_device rd88f5182_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &rd88f5182_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &rd88f5182_nor_flash_resource,
+};
+
+#ifdef CONFIG_LEDS
+
+/*****************************************************************************
+ * Use GPIO debug led as CPU active indication
+ ****************************************************************************/
+
+static void rd88f5182_dbgled_event(led_event_t evt)
+{
+ int val;
+
+ if (evt == led_idle_end)
+ val = 1;
+ else if (evt == led_idle_start)
+ val = 0;
+ else
+ return;
+
+ gpio_set_value(RD88F5182_GPIO_DBG_LED, val);
+}
+
+static int __init rd88f5182_dbgled_init(void)
+{
+ int pin;
+
+ if (machine_is_rd88f5182()) {
+ pin = RD88F5182_GPIO_DBG_LED;
+
+ if (gpio_request(pin, "DBGLED") == 0) {
+ if (gpio_direction_output(pin, 0) != 0) {
+ printk(KERN_ERR "rd88f5182_dbgled_init failed "
+ "to set output pin %d\n", pin);
+ gpio_free(pin);
+ return 0;
+ }
+ } else {
+ printk(KERN_ERR "rd88f5182_dbgled_init failed "
+ "to request gpio %d\n", pin);
+ return 0;
+ }
+
+ leds_event = rd88f5182_dbgled_event;
+ }
+ return 0;
+}
+
+__initcall(rd88f5182_dbgled_init);
+
+#endif
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+void __init rd88f5182_pci_preinit(void)
+{
+ int pin;
+
+ /*
+ * Configure PCI GPIO IRQ pins
+ */
+ pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
+ if (gpio_request(pin, "PCI IntA") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit faield to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
+ }
+
+ pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
+ if (gpio_request(pin, "PCI IntB") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit faield to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
+ }
+}
+
+static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ /*
+ * PCI-E isn't used on the RD2
+ */
+ if (dev->bus->number == orion_pcie_local_bus_nr())
+ return IRQ_ORION_PCIE0_INT;
+
+ /*
+ * PCI IRQs are connected via GPIOs
+ */
+ switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
+ case 0:
+ if (pin == 1)
+ return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
+ else
+ return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
+ default:
+ return -1;
+ }
+}
+
+static struct hw_pci rd88f5182_pci __initdata = {
+ .nr_controllers = 2,
+ .preinit = rd88f5182_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = orion_pci_sys_setup,
+ .scan = orion_pci_sys_scan_bus,
+ .map_irq = rd88f5182_pci_map_irq,
+};
+
+static int __init rd88f5182_pci_init(void)
+{
+ if (machine_is_rd88f5182())
+ pci_common_init(&rd88f5182_pci);
+
+ return 0;
+}
+
+subsys_initcall(rd88f5182_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data rd88f5182_eth_data = {
+ .phy_addr = 8,
+ .force_phy_addr = 1,
+};
+
+/*****************************************************************************
+ * RTC DS1338 on I2C bus
+ ****************************************************************************/
+static struct i2c_board_info __initdata rd88f5182_i2c_rtc = {
+ .driver_name = "rtc-ds1307",
+ .type = "ds1338",
+ .addr = 0x68,
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct platform_device *rd88f5182_devices[] __initdata = {
+ &rd88f5182_nor_flash,
+};
+
+static void __init rd88f5182_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion_init();
+
+ /*
+ * Setup the CPU address decode windows for our devices
+ */
+ orion_setup_cpu_win(ORION_DEV_BOOT, RD88F5182_NOR_BOOT_BASE,
+ RD88F5182_NOR_BOOT_SIZE, -1);
+ orion_setup_cpu_win(ORION_DEV1, RD88F5182_NOR_BASE,
+ RD88F5182_NOR_SIZE, -1);
+
+ /*
+ * Open a special address decode windows for the PCIE WA.
+ */
+ orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE);
+ orion_write(ORION_REGS_BASE | 0x20070, (0x7941 |
+ (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
+
+ /*
+ * Setup Multiplexing Pins --
+ * MPP[0] Debug Led (GPIO - Out)
+ * MPP[1] Debug Led (GPIO - Out)
+ * MPP[2] N/A
+ * MPP[3] RTC_Int (GPIO - In)
+ * MPP[4] GPIO
+ * MPP[5] GPIO
+ * MPP[6] PCI_intA (GPIO - In)
+ * MPP[7] PCI_intB (GPIO - In)
+ * MPP[8-11] N/A
+ * MPP[12] SATA 0 presence Indication
+ * MPP[13] SATA 1 presence Indication
+ * MPP[14] SATA 0 active Indication
+ * MPP[15] SATA 1 active indication
+ * MPP[16-19] Not used
+ * MPP[20] PCI Clock to MV88F5182
+ * MPP[21] PCI Clock to mini PCI CON11
+ * MPP[22] USB 0 over current indication
+ * MPP[23] USB 1 over current indication
+ * MPP[24] USB 1 over current enable
+ * MPP[25] USB 0 over current enable
+ */
+
+ orion_write(MPP_0_7_CTRL, 0x00000003);
+ orion_write(MPP_8_15_CTRL, 0x55550000);
+ orion_write(MPP_16_19_CTRL, 0x5555);
+
+ orion_gpio_set_valid_pins(0x000000fb);
+
+ platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices));
+ i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
+ orion_eth_init(&rd88f5182_eth_data);
+}
+
+MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
+ /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
+ .phys_io = ORION_REGS_BASE,
+ .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = rd88f5182_init,
+ .map_io = orion_map_io,
+ .init_irq = orion_init_irq,
+ .timer = &orion_timer,
+MACHINE_END
diff --git a/arch/arm/mach-orion/time.c b/arch/arm/mach-orion/time.c
new file mode 100644
index 0000000..bd4262d
--- /dev/null
+++ b/arch/arm/mach-orion/time.c
@@ -0,0 +1,181 @@
+/*
+ * arch/arm/mach-orion/time.c
+ *
+ * Core time functions for Marvell Orion System On Chip
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/mach/time.h>
+#include <asm/arch/orion.h>
+#include "common.h"
+
+/*
+ * Timer0: clock_event_device, Tick.
+ * Timer1: clocksource, Free running.
+ * WatchDog: Not used.
+ *
+ * Timers are counting down.
+ */
+#define CLOCKEVENT 0
+#define CLOCKSOURCE 1
+
+/*
+ * Timers bits
+ */
+#define BRIDGE_INT_TIMER(x) (1 << ((x) + 1))
+#define TIMER_EN(x) (1 << ((x) * 2))
+#define TIMER_RELOAD_EN(x) (1 << (((x) * 2) + 1))
+#define BRIDGE_INT_TIMER_WD (1 << 3)
+#define TIMER_WD_EN (1 << 4)
+#define TIMER_WD_RELOAD_EN (1 << 5)
+
+static cycle_t orion_clksrc_read(void)
+{
+ return (0xffffffff - orion_read(TIMER_VAL(CLOCKSOURCE)));
+}
+
+static struct clocksource orion_clksrc = {
+ .name = "orion_clocksource",
+ .shift = 20,
+ .rating = 300,
+ .read = orion_clksrc_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int
+orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev)
+{
+ unsigned long flags;
+
+ if (delta == 0)
+ return -ETIME;
+
+ local_irq_save(flags);
+
+ /*
+ * Clear and enable timer interrupt bit
+ */
+ orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT));
+ orion_setbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT));
+
+ /*
+ * Setup new timer value
+ */
+ orion_write(TIMER_VAL(CLOCKEVENT), delta);
+
+ /*
+ * Disable auto reload and kickoff the timer
+ */
+ orion_clrbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT));
+ orion_setbits(TIMER_CTRL, TIMER_EN(CLOCKEVENT));
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static void
+orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ if (mode == CLOCK_EVT_MODE_PERIODIC) {
+ /*
+ * Setup latch cycles in timer and enable reload interrupt.
+ */
+ orion_write(TIMER_VAL_RELOAD(CLOCKEVENT), LATCH);
+ orion_write(TIMER_VAL(CLOCKEVENT), LATCH);
+ orion_setbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT));
+ orion_setbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT) |
+ TIMER_EN(CLOCKEVENT));
+ } else {
+ /*
+ * Disable timer and interrupt
+ */
+ orion_clrbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT));
+ orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT));
+ orion_clrbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT) |
+ TIMER_EN(CLOCKEVENT));
+ }
+
+ local_irq_restore(flags);
+}
+
+static struct clock_event_device orion_clkevt = {
+ .name = "orion_tick",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .rating = 300,
+ .cpumask = CPU_MASK_CPU0,
+ .set_next_event = orion_clkevt_next_event,
+ .set_mode = orion_clkevt_mode,
+};
+
+static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
+{
+ /*
+ * Clear cause bit and do event
+ */
+ orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT));
+ orion_clkevt.event_handler(&orion_clkevt);
+ return IRQ_HANDLED;
+}
+
+static struct irqaction orion_timer_irq = {
+ .name = "orion_tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = orion_timer_interrupt
+};
+
+static void orion_timer_init(void)
+{
+ /*
+ * Setup clocksource free running timer (no interrupt on reload)
+ */
+ orion_write(TIMER_VAL(CLOCKSOURCE), 0xffffffff);
+ orion_write(TIMER_VAL_RELOAD(CLOCKSOURCE), 0xffffffff);
+ orion_clrbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKSOURCE));
+ orion_setbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKSOURCE) |
+ TIMER_EN(CLOCKSOURCE));
+
+ /*
+ * Register clocksource
+ */
+ orion_clksrc.mult =
+ clocksource_hz2mult(CLOCK_TICK_RATE, orion_clksrc.shift);
+
+ clocksource_register(&orion_clksrc);
+
+ /*
+ * Connect and enable tick handler
+ */
+ setup_irq(IRQ_ORION_BRIDGE, &orion_timer_irq);
+
+ /*
+ * Register clockevent
+ */
+ orion_clkevt.mult =
+ div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, orion_clkevt.shift);
+ orion_clkevt.max_delta_ns =
+ clockevent_delta2ns(0xfffffffe, &orion_clkevt);
+ orion_clkevt.min_delta_ns =
+ clockevent_delta2ns(1, &orion_clkevt);
+
+ clockevents_register_device(&orion_clkevt);
+}
+
+struct sys_timer orion_timer = {
+ .init = orion_timer_init,
+};
diff --git a/arch/arm/mach-orion/ts209-setup.c b/arch/arm/mach-orion/ts209-setup.c
new file mode 100644
index 0000000..e3e930e
--- /dev/null
+++ b/arch/arm/mach-orion/ts209-setup.c
@@ -0,0 +1,335 @@
+/*
+ * QNAP TS-109/TS-209 Board Setup
+ *
+ * Maintainer: Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/serial_reg.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion.h>
+#include <asm/arch/platform.h>
+#include "common.h"
+
+#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
+#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M
+
+/****************************************************************************
+ * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
+ * partitions on the device because we want to keep compatability with
+ * existing QNAP firmware.
+ *
+ * Layout as used by QNAP:
+ * [2] 0x00000000-0x00200000 : "Kernel"
+ * [3] 0x00200000-0x00600000 : "RootFS1"
+ * [4] 0x00600000-0x00700000 : "RootFS2"
+ * [6] 0x00700000-0x00760000 : "NAS Config" (read-only)
+ * [5] 0x00760000-0x00780000 : "U-Boot Config"
+ * [1] 0x00780000-0x00800000 : "U-Boot" (read-only)
+ ***************************************************************************/
+static struct mtd_partition qnap_ts209_partitions[] = {
+ {
+ .name = "U-Boot",
+ .size = 0x00080000,
+ .offset = 0x00780000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "Kernel",
+ .size = 0x00200000,
+ .offset = 0,
+ }, {
+ .name = "RootFS1",
+ .size = 0x00400000,
+ .offset = 0x00200000,
+ }, {
+ .name = "RootFS2",
+ .size = 0x00100000,
+ .offset = 0x00600000,
+ }, {
+ .name = "U-Boot Config",
+ .size = 0x00020000,
+ .offset = 0x00760000,
+ }, {
+ .name = "NAS Config",
+ .size = 0x00060000,
+ .offset = 0x00700000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct physmap_flash_data qnap_ts209_nor_flash_data = {
+ .width = 1,
+ .parts = qnap_ts209_partitions,
+ .nr_parts = ARRAY_SIZE(qnap_ts209_partitions)
+};
+
+static struct resource qnap_ts209_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = QNAP_TS209_NOR_BOOT_BASE,
+ .end = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device qnap_ts209_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = { .platform_data = &qnap_ts209_nor_flash_data, },
+ .resource = &qnap_ts209_nor_flash_resource,
+ .num_resources = 1,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+#define QNAP_TS209_PCI_SLOT0_OFFS 7
+#define QNAP_TS209_PCI_SLOT0_IRQ_PIN 6
+#define QNAP_TS209_PCI_SLOT1_IRQ_PIN 7
+
+void __init qnap_ts209_pci_preinit(void)
+{
+ int pin;
+
+ /*
+ * Configure PCI GPIO IRQ pins
+ */
+ pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN;
+ if (gpio_request(pin, "PCI Int1") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+ } else {
+ printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
+ "%d\n", pin);
+ }
+
+ pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN;
+ if (gpio_request(pin, "PCI Int2") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+ } else {
+ printk(KERN_ERR "qnap_ts209_pci_preinit failed "
+ "to set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
+ "%d\n", pin);
+ }
+}
+
+static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ /*
+ * PCIE IRQ is connected internally (not GPIO)
+ */
+ if (dev->bus->number == orion_pcie_local_bus_nr())
+ return IRQ_ORION_PCIE0_INT;
+
+ /*
+ * PCI IRQs are connected via GPIOs
+ */
+ switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) {
+ case 0:
+ return gpio_to_irq(QNAP_TS209_PCI_SLOT0_IRQ_PIN);
+ case 1:
+ return gpio_to_irq(QNAP_TS209_PCI_SLOT1_IRQ_PIN);
+ default:
+ return -1;
+ }
+}
+
+static struct hw_pci qnap_ts209_pci __initdata = {
+ .nr_controllers = 2,
+ .preinit = qnap_ts209_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = orion_pci_sys_setup,
+ .scan = orion_pci_sys_scan_bus,
+ .map_irq = qnap_ts209_pci_map_irq,
+};
+
+static int __init qnap_ts209_pci_init(void)
+{
+ if (machine_is_ts_x09())
+ pci_common_init(&qnap_ts209_pci);
+
+ return 0;
+}
+
+subsys_initcall(qnap_ts209_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data qnap_ts209_eth_data = {
+ .phy_addr = 8,
+ .force_phy_addr = 1,
+};
+
+/*****************************************************************************
+ * RTC S35390A on I2C bus
+ ****************************************************************************/
+static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = {
+ .driver_name = "rtc-s35390a",
+ .addr = 0x30,
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ * Power button is attached to the PIC microcontroller
+ ****************************************************************************/
+
+#define QNAP_TS209_GPIO_KEY_MEDIA 1
+#define QNAP_TS209_GPIO_KEY_RESET 2
+
+static struct gpio_keys_button qnap_ts209_buttons[] = {
+ {
+ .code = KEY_RESTART,
+ .gpio = QNAP_TS209_GPIO_KEY_MEDIA,
+ .desc = "USB Copy Button",
+ .active_low = 1,
+ },
+ {
+ .code = KEY_POWER,
+ .gpio = QNAP_TS209_GPIO_KEY_RESET,
+ .desc = "Reset Button",
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_platform_data qnap_ts209_button_data = {
+ .buttons = qnap_ts209_buttons,
+ .nbuttons = ARRAY_SIZE(qnap_ts209_buttons),
+};
+
+static struct platform_device qnap_ts209_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = { .platform_data = &qnap_ts209_button_data, },
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct platform_device *qnap_ts209_devices[] __initdata = {
+ &qnap_ts209_nor_flash,
+ &qnap_ts209_button_device,
+};
+
+/*
+ * QNAP TS-[12]09 specific power off method via UART1-attached PIC
+ */
+
+#define UART1_REG(x) (UART1_BASE + ((UART_##x) << 2))
+
+static void qnap_ts209_power_off(void)
+{
+ /* 19200 baud divisor */
+ const unsigned divisor = ((ORION_TCLK + (8 * 19200)) / (16 * 19200));
+
+ pr_info("%s: triggering power-off...\n", __func__);
+
+ /* hijack uart1 and reset into sane state (19200,8n1) */
+ orion_write(UART1_REG(LCR), 0x83);
+ orion_write(UART1_REG(DLL), divisor & 0xff);
+ orion_write(UART1_REG(DLM), (divisor >> 8) & 0xff);
+ orion_write(UART1_REG(LCR), 0x03);
+ orion_write(UART1_REG(IER), 0x00);
+ orion_write(UART1_REG(FCR), 0x00);
+ orion_write(UART1_REG(MCR), 0x00);
+
+ /* send the power-off command 'A' to PIC */
+ orion_write(UART1_REG(TX), 'A');
+}
+
+static void __init qnap_ts209_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion_init();
+
+ /*
+ * Setup flash mapping
+ */
+ orion_setup_cpu_win(ORION_DEV_BOOT, QNAP_TS209_NOR_BOOT_BASE,
+ QNAP_TS209_NOR_BOOT_SIZE, -1);
+
+ /*
+ * Open a special address decode windows for the PCIE WA.
+ */
+ orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE);
+ orion_write(ORION_REGS_BASE | 0x20070, (0x7941 |
+ (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
+
+ /*
+ * Setup Multiplexing Pins --
+ * MPP[0] Reserved
+ * MPP[1] USB copy button (0 active)
+ * MPP[2] Load defaults button (0 active)
+ * MPP[3] GPIO RTC
+ * MPP[4-5] Reserved
+ * MPP[6] PCI Int A
+ * MPP[7] PCI Int B
+ * MPP[8-11] Reserved
+ * MPP[12] SATA 0 presence
+ * MPP[13] SATA 1 presence
+ * MPP[14] SATA 0 active
+ * MPP[15] SATA 1 active
+ * MPP[16] UART1 RXD
+ * MPP[17] UART1 TXD
+ * MPP[18] SW_RST (0 active)
+ * MPP[19] Reserved
+ * MPP[20] PCI clock 0
+ * MPP[21] PCI clock 1
+ * MPP[22] USB 0 over current
+ * MPP[23-25] Reserved
+ */
+ orion_write(MPP_0_7_CTRL, 0x3);
+ orion_write(MPP_8_15_CTRL, 0x55550000);
+ orion_write(MPP_16_19_CTRL, 0x5500);
+ orion_gpio_set_valid_pins(0x3cc0fff);
+
+ /* register ts209 specific power-off method */
+ pm_power_off = qnap_ts209_power_off;
+
+ platform_add_devices(qnap_ts209_devices,
+ ARRAY_SIZE(qnap_ts209_devices));
+ i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
+ orion_eth_init(&qnap_ts209_eth_data);
+}
+
+MACHINE_START(TS209, "QNAP TS-109/TS-209")
+ /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
+ .phys_io = ORION_REGS_BASE,
+ .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = qnap_ts209_init,
+ .map_io = orion_map_io,
+ .init_irq = orion_init_irq,
+ .timer = &orion_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
index 67e05f0..6d4ca8f 100644
--- a/arch/arm/mach-pnx4008/time.c
+++ b/arch/arm/mach-pnx4008/time.c
@@ -51,8 +51,6 @@
{
if (__raw_readl(HSTIM_INT) & MATCH0_INT) {
- write_seqlock(&xtime_lock);
-
do {
timer_tick();
@@ -73,8 +71,6 @@
} while ((signed)
(__raw_readl(HSTIM_MATCH0) -
__raw_readl(HSTIM_COUNTER)) < 0);
-
- write_sequnlock(&xtime_lock);
}
return IRQ_HANDLED;
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 656d496..0908bea 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -51,6 +51,50 @@
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
+config ARCH_PXA_ESERIES
+ bool "PXA based Toshiba e-series PDAs"
+ select PXA25x
+
+config MACH_E330
+ bool "Toshiba e330"
+ default y
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e330 family PDA.
+
+config MACH_E740
+ bool "Toshiba e740"
+ default y
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e740 family PDA.
+
+config MACH_E750
+ bool "Toshiba e750"
+ default y
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e750 family PDA.
+
+config MACH_E400
+ bool "Toshiba e400"
+ default y
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e400 family PDA.
+
+config MACH_E800
+ bool "Toshiba e800"
+ default y
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e800 family PDA.
+
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
select PXA27x
@@ -59,15 +103,44 @@
bool "CompuLab EM-x270 platform"
select PXA27x
+config MACH_COLIBRI
+ bool "Toradex Colibri PX27x"
+ select PXA27x
+
config MACH_ZYLONITE
bool "PXA3xx Development Platform"
select PXA3xx
+config MACH_LITTLETON
+ bool "PXA3xx Form Factor Platform (aka Littleton)"
+ select PXA3xx
+ select PXA_SSP
+
config MACH_ARMCORE
bool "CompuLab CM-X270 modules"
select PXA27x
select IWMMXT
+config MACH_MAGICIAN
+ bool "Enable HTC Magician Support"
+ depends on ARCH_PXA
+ select PXA27x
+ select IWMMXT
+
+config MACH_PCM027
+ bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
+ select PXA27x
+ select IWMMXT
+
+endchoice
+
+choice
+ prompt "Used baseboard"
+ depends on MACH_PCM027
+
+config MACH_PCM990_BASEBOARD
+ bool "PHYTEC PCM-990 development board"
+
endchoice
if PXA_SHARPSL
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 4263527..b5c916c 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -3,7 +3,7 @@
#
# Common support (must be linked before board specific support)
-obj-y += clock.o generic.o irq.o dma.o time.o
+obj-y += clock.o devices.o generic.o irq.o dma.o time.o
obj-$(CONFIG_PXA25x) += pxa25x.o
obj-$(CONFIG_PXA27x) += pxa27x.o
obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp.o
@@ -16,18 +16,24 @@
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
+obj-$(CONFIG_MACH_COLIBRI) += colibri.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o
obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o
+obj-$(CONFIG_MACH_PCM027) += pcm027.o
+obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
+obj-$(CONFIG_MACH_MAGICIAN) += magician.o
+obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
ifeq ($(CONFIG_MACH_ZYLONITE),y)
obj-y += zylonite.o
obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o
obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o
endif
+obj-$(CONFIG_MACH_LITTLETON) += littleton.o
obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o
@@ -41,13 +47,10 @@
obj-$(CONFIG_LEDS) += $(led-y)
# Misc features
-obj-$(CONFIG_PM) += pm.o sleep.o
+obj-$(CONFIG_PM) += pm.o sleep.o standby.o
+obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o
obj-$(CONFIG_PXA_SSP) += ssp.o
-ifeq ($(CONFIG_PXA27x),y)
-obj-$(CONFIG_PM) += standby.o
-endif
-
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index a163492..28cfd71 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -487,18 +487,15 @@
/* card detect IRQ on GPIO 83 */
pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
- set_irq_type(CMX270_MMC_IRQ, IRQT_FALLING);
err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
- if (err) {
+ if (err)
printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
" request MMC card detect IRQ\n");
- return -1;
- }
- return 0;
+ return err;
}
static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
new file mode 100644
index 0000000..6db54e3
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri.c
@@ -0,0 +1,134 @@
+/*
+ * linux/arch/arm/mach-pxa/colibri.c
+ *
+ * Support for Toradex PXA27x based Colibri module
+ * Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/colibri.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/*
+ * Flash
+ */
+static struct mtd_partition colibri_partitions[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0x00000000,
+ .size = 0x00040000,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ }, {
+ .name = "Kernel",
+ .offset = 0x00040000,
+ .size = 0x00400000,
+ .mask_flags = 0
+ }, {
+ .name = "Rootfs",
+ .offset = 0x00440000,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct physmap_flash_data colibri_flash_data[] = {
+ {
+ .width = 4, /* bankwidth in bytes */
+ .parts = colibri_partitions,
+ .nr_parts = ARRAY_SIZE(colibri_partitions)
+ }
+};
+
+static struct resource flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = colibri_flash_data,
+ },
+ .resource = &flash_resource,
+ .num_resources = 1,
+};
+
+/*
+ * DM9000 Ethernet
+ */
+static struct resource dm9000_resources[] = {
+ [0] = {
+ .start = COLIBRI_ETH_PHYS,
+ .end = COLIBRI_ETH_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = COLIBRI_ETH_PHYS + 4,
+ .end = COLIBRI_ETH_PHYS + 4 + 500,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = COLIBRI_ETH_IRQ,
+ .end = COLIBRI_ETH_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dm9000_device = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm9000_resources),
+ .resource = dm9000_resources,
+};
+
+static struct platform_device *colibri_devices[] __initdata = {
+ &flash_device,
+ &dm9000_device,
+};
+
+static void __init colibri_init(void)
+{
+ /* DM9000 LAN */
+ pxa_gpio_mode(GPIO78_nCS_2_MD);
+ pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
+ set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING);
+
+ platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
+}
+
+MACHINE_START(COLIBRI, "Toradex Colibri PXA27x")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = COLIBRI_SDRAM_BASE + 0x100,
+ .init_machine = colibri_init,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 2363cc6..9292576 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -21,6 +21,7 @@
#include <linux/mmc/host.h>
#include <linux/pm.h>
#include <linux/backlight.h>
+#include <video/w100fb.h>
#include <asm/setup.h>
#include <asm/memory.h>
@@ -141,6 +142,136 @@
/*
+ * LCD/Framebuffer
+ */
+static void w100_lcdtg_suspend(struct w100fb_par *par)
+{
+ corgi_lcdtg_suspend();
+}
+
+static void w100_lcdtg_init(struct w100fb_par *par)
+{
+ corgi_lcdtg_hw_init(par->xres);
+}
+
+
+static struct w100_tg_info corgi_lcdtg_info = {
+ .change = w100_lcdtg_init,
+ .suspend = w100_lcdtg_suspend,
+ .resume = w100_lcdtg_init,
+};
+
+static struct w100_mem_info corgi_fb_mem = {
+ .ext_cntl = 0x00040003,
+ .sdram_mode_reg = 0x00650021,
+ .ext_timing_cntl = 0x10002a4a,
+ .io_cntl = 0x7ff87012,
+ .size = 0x1fffff,
+};
+
+static struct w100_gen_regs corgi_fb_regs = {
+ .lcd_format = 0x00000003,
+ .lcdd_cntl1 = 0x01CC0000,
+ .lcdd_cntl2 = 0x0003FFFF,
+ .genlcd_cntl1 = 0x00FFFF0D,
+ .genlcd_cntl2 = 0x003F3003,
+ .genlcd_cntl3 = 0x000102aa,
+};
+
+static struct w100_gpio_regs corgi_fb_gpio = {
+ .init_data1 = 0x000000bf,
+ .init_data2 = 0x00000000,
+ .gpio_dir1 = 0x00000000,
+ .gpio_oe1 = 0x03c0feff,
+ .gpio_dir2 = 0x00000000,
+ .gpio_oe2 = 0x00000000,
+};
+
+static struct w100_mode corgi_fb_modes[] = {
+{
+ .xres = 480,
+ .yres = 640,
+ .left_margin = 0x56,
+ .right_margin = 0x55,
+ .upper_margin = 0x03,
+ .lower_margin = 0x00,
+ .crtc_ss = 0x82360056,
+ .crtc_ls = 0xA0280000,
+ .crtc_gs = 0x80280028,
+ .crtc_vpos_gs = 0x02830002,
+ .crtc_rev = 0x00400008,
+ .crtc_dclk = 0xA0000000,
+ .crtc_gclk = 0x8015010F,
+ .crtc_goe = 0x80100110,
+ .crtc_ps1_active = 0x41060010,
+ .pll_freq = 75,
+ .fast_pll_freq = 100,
+ .sysclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .pixclk_src = CLK_SRC_PLL,
+ .pixclk_divider = 2,
+ .pixclk_divider_rotated = 6,
+},{
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 0x27,
+ .right_margin = 0x2e,
+ .upper_margin = 0x01,
+ .lower_margin = 0x00,
+ .crtc_ss = 0x81170027,
+ .crtc_ls = 0xA0140000,
+ .crtc_gs = 0xC0140014,
+ .crtc_vpos_gs = 0x00010141,
+ .crtc_rev = 0x00400008,
+ .crtc_dclk = 0xA0000000,
+ .crtc_gclk = 0x8015010F,
+ .crtc_goe = 0x80100110,
+ .crtc_ps1_active = 0x41060010,
+ .pll_freq = 0,
+ .fast_pll_freq = 0,
+ .sysclk_src = CLK_SRC_XTAL,
+ .sysclk_divider = 0,
+ .pixclk_src = CLK_SRC_XTAL,
+ .pixclk_divider = 1,
+ .pixclk_divider_rotated = 1,
+},
+
+};
+
+static struct w100fb_mach_info corgi_fb_info = {
+ .tg = &corgi_lcdtg_info,
+ .init_mode = INIT_MODE_ROTATED,
+ .mem = &corgi_fb_mem,
+ .regs = &corgi_fb_regs,
+ .modelist = &corgi_fb_modes[0],
+ .num_modes = 2,
+ .gpio = &corgi_fb_gpio,
+ .xtal_freq = 12500000,
+ .xtal_dbl = 0,
+};
+
+static struct resource corgi_fb_resources[] = {
+ [0] = {
+ .start = 0x08000000,
+ .end = 0x08ffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device corgifb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(corgi_fb_resources),
+ .resource = corgi_fb_resources,
+ .dev = {
+ .platform_data = &corgi_fb_info,
+ .parent = &corgissp_device.dev,
+ },
+
+};
+
+
+/*
* Corgi Backlight Device
*/
static void corgi_bl_kick_battery(void)
@@ -154,6 +285,21 @@
}
}
+static void corgi_bl_set_intensity(int intensity)
+{
+ if (intensity > 0x10)
+ intensity += 0x10;
+
+ /* Bits 0-4 are accessed via the SSP interface */
+ corgi_ssp_blduty_set(intensity & 0x1f);
+
+ /* Bit 5 is via SCOOP */
+ if (intensity & 0x0020)
+ set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
+ else
+ reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
+}
+
static struct generic_bl_info corgi_bl_machinfo = {
.name = "corgi-bl",
.max_intensity = 0x2f,
@@ -190,9 +336,40 @@
.id = -1,
};
+
/*
* Corgi Touch Screen Device
*/
+static unsigned long (*get_hsync_invperiod)(struct device *dev);
+
+static void inline sharpsl_wait_sync(int gpio)
+{
+ while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
+ while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
+}
+
+static unsigned long corgi_get_hsync_invperiod(void)
+{
+ if (!get_hsync_invperiod)
+ get_hsync_invperiod = symbol_get(w100fb_get_hsynclen);
+ if (!get_hsync_invperiod)
+ return 0;
+
+ return get_hsync_invperiod(&corgifb_device.dev);
+}
+
+static void corgi_put_hsync(void)
+{
+ if (get_hsync_invperiod)
+ symbol_put(w100fb_get_hsynclen);
+ get_hsync_invperiod = NULL;
+}
+
+static void corgi_wait_hsync(void)
+{
+ sharpsl_wait_sync(CORGI_GPIO_HSYNC);
+}
+
static struct resource corgits_resources[] = {
[0] = {
.start = CORGI_IRQ_GPIO_TP_INT,
@@ -202,9 +379,9 @@
};
static struct corgits_machinfo corgi_ts_machinfo = {
- .get_hsync_len = corgi_get_hsync_len,
- .put_hsync = corgi_put_hsync,
- .wait_hsync = corgi_wait_hsync,
+ .get_hsync_invperiod = corgi_get_hsync_invperiod,
+ .put_hsync = corgi_put_hsync,
+ .wait_hsync = corgi_wait_hsync,
};
static struct platform_device corgits_device = {
@@ -242,12 +419,10 @@
err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
- if (err) {
+ if (err)
printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
- return -1;
- }
- return 0;
+ return err;
}
static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index 365b943..9328df3 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -173,7 +173,7 @@
static int lcd_inited;
-static void lcdtg_hw_init(int mode)
+void corgi_lcdtg_hw_init(int mode)
{
if (!lcd_inited) {
int comadj;
@@ -254,7 +254,7 @@
}
}
-static void lcdtg_suspend(void)
+void corgi_lcdtg_suspend(void)
{
/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
mdelay(34);
@@ -288,298 +288,3 @@
lcd_inited = 0;
}
-
-/*
- * Corgi w100 Frame Buffer Device
- */
-#ifdef CONFIG_PXA_SHARP_C7xx
-
-#include <video/w100fb.h>
-
-static void w100_lcdtg_suspend(struct w100fb_par *par)
-{
- lcdtg_suspend();
-}
-
-static void w100_lcdtg_init(struct w100fb_par *par)
-{
- lcdtg_hw_init(par->xres);
-}
-
-
-static struct w100_tg_info corgi_lcdtg_info = {
- .change = w100_lcdtg_init,
- .suspend = w100_lcdtg_suspend,
- .resume = w100_lcdtg_init,
-};
-
-static struct w100_mem_info corgi_fb_mem = {
- .ext_cntl = 0x00040003,
- .sdram_mode_reg = 0x00650021,
- .ext_timing_cntl = 0x10002a4a,
- .io_cntl = 0x7ff87012,
- .size = 0x1fffff,
-};
-
-static struct w100_gen_regs corgi_fb_regs = {
- .lcd_format = 0x00000003,
- .lcdd_cntl1 = 0x01CC0000,
- .lcdd_cntl2 = 0x0003FFFF,
- .genlcd_cntl1 = 0x00FFFF0D,
- .genlcd_cntl2 = 0x003F3003,
- .genlcd_cntl3 = 0x000102aa,
-};
-
-static struct w100_gpio_regs corgi_fb_gpio = {
- .init_data1 = 0x000000bf,
- .init_data2 = 0x00000000,
- .gpio_dir1 = 0x00000000,
- .gpio_oe1 = 0x03c0feff,
- .gpio_dir2 = 0x00000000,
- .gpio_oe2 = 0x00000000,
-};
-
-static struct w100_mode corgi_fb_modes[] = {
-{
- .xres = 480,
- .yres = 640,
- .left_margin = 0x56,
- .right_margin = 0x55,
- .upper_margin = 0x03,
- .lower_margin = 0x00,
- .crtc_ss = 0x82360056,
- .crtc_ls = 0xA0280000,
- .crtc_gs = 0x80280028,
- .crtc_vpos_gs = 0x02830002,
- .crtc_rev = 0x00400008,
- .crtc_dclk = 0xA0000000,
- .crtc_gclk = 0x8015010F,
- .crtc_goe = 0x80100110,
- .crtc_ps1_active = 0x41060010,
- .pll_freq = 75,
- .fast_pll_freq = 100,
- .sysclk_src = CLK_SRC_PLL,
- .sysclk_divider = 0,
- .pixclk_src = CLK_SRC_PLL,
- .pixclk_divider = 2,
- .pixclk_divider_rotated = 6,
-},{
- .xres = 240,
- .yres = 320,
- .left_margin = 0x27,
- .right_margin = 0x2e,
- .upper_margin = 0x01,
- .lower_margin = 0x00,
- .crtc_ss = 0x81170027,
- .crtc_ls = 0xA0140000,
- .crtc_gs = 0xC0140014,
- .crtc_vpos_gs = 0x00010141,
- .crtc_rev = 0x00400008,
- .crtc_dclk = 0xA0000000,
- .crtc_gclk = 0x8015010F,
- .crtc_goe = 0x80100110,
- .crtc_ps1_active = 0x41060010,
- .pll_freq = 0,
- .fast_pll_freq = 0,
- .sysclk_src = CLK_SRC_XTAL,
- .sysclk_divider = 0,
- .pixclk_src = CLK_SRC_XTAL,
- .pixclk_divider = 1,
- .pixclk_divider_rotated = 1,
-},
-
-};
-
-static struct w100fb_mach_info corgi_fb_info = {
- .tg = &corgi_lcdtg_info,
- .init_mode = INIT_MODE_ROTATED,
- .mem = &corgi_fb_mem,
- .regs = &corgi_fb_regs,
- .modelist = &corgi_fb_modes[0],
- .num_modes = 2,
- .gpio = &corgi_fb_gpio,
- .xtal_freq = 12500000,
- .xtal_dbl = 0,
-};
-
-static struct resource corgi_fb_resources[] = {
- [0] = {
- .start = 0x08000000,
- .end = 0x08ffffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device corgifb_device = {
- .name = "w100fb",
- .id = -1,
- .num_resources = ARRAY_SIZE(corgi_fb_resources),
- .resource = corgi_fb_resources,
- .dev = {
- .platform_data = &corgi_fb_info,
- .parent = &corgissp_device.dev,
- },
-
-};
-#endif
-
-
-/*
- * Spitz PXA Frame Buffer Device
- */
-#ifdef CONFIG_PXA_SHARP_Cxx00
-
-#include <asm/arch/pxafb.h>
-
-void spitz_lcd_power(int on, struct fb_var_screeninfo *var)
-{
- if (on)
- lcdtg_hw_init(var->xres);
- else
- lcdtg_suspend();
-}
-
-#endif
-
-
-/*
- * Corgi/Spitz Touchscreen to LCD interface
- */
-static unsigned long (*get_hsync_time)(struct device *dev);
-
-static void inline sharpsl_wait_sync(int gpio)
-{
- while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
- while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
-}
-
-#ifdef CONFIG_PXA_SHARP_C7xx
-unsigned long corgi_get_hsync_len(void)
-{
- if (!get_hsync_time)
- get_hsync_time = symbol_get(w100fb_get_hsynclen);
- if (!get_hsync_time)
- return 0;
-
- return get_hsync_time(&corgifb_device.dev);
-}
-
-void corgi_put_hsync(void)
-{
- if (get_hsync_time)
- symbol_put(w100fb_get_hsynclen);
- get_hsync_time = NULL;
-}
-
-void corgi_wait_hsync(void)
-{
- sharpsl_wait_sync(CORGI_GPIO_HSYNC);
-}
-#endif
-
-#ifdef CONFIG_PXA_SHARP_Cxx00
-static struct device *spitz_pxafb_dev;
-
-static int is_pxafb_device(struct device * dev, void * data)
-{
- struct platform_device *pdev = container_of(dev, struct platform_device, dev);
-
- return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
-}
-
-unsigned long spitz_get_hsync_len(void)
-{
-#ifdef CONFIG_FB_PXA
- if (!spitz_pxafb_dev) {
- spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
- if (!spitz_pxafb_dev)
- return 0;
- }
- if (!get_hsync_time)
- get_hsync_time = symbol_get(pxafb_get_hsync_time);
- if (!get_hsync_time)
-#endif
- return 0;
-
- return pxafb_get_hsync_time(spitz_pxafb_dev);
-}
-
-void spitz_put_hsync(void)
-{
- put_device(spitz_pxafb_dev);
- if (get_hsync_time)
- symbol_put(pxafb_get_hsync_time);
- spitz_pxafb_dev = NULL;
- get_hsync_time = NULL;
-}
-
-void spitz_wait_hsync(void)
-{
- sharpsl_wait_sync(SPITZ_GPIO_HSYNC);
-}
-#endif
-
-/*
- * Corgi/Spitz Backlight Power
- */
-#ifdef CONFIG_PXA_SHARP_C7xx
-void corgi_bl_set_intensity(int intensity)
-{
- if (intensity > 0x10)
- intensity += 0x10;
-
- /* Bits 0-4 are accessed via the SSP interface */
- corgi_ssp_blduty_set(intensity & 0x1f);
-
- /* Bit 5 is via SCOOP */
- if (intensity & 0x0020)
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
- else
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
-}
-#endif
-
-
-#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
-void spitz_bl_set_intensity(int intensity)
-{
- if (intensity > 0x10)
- intensity += 0x10;
-
- /* Bits 0-4 are accessed via the SSP interface */
- corgi_ssp_blduty_set(intensity & 0x1f);
-
- /* Bit 5 is via SCOOP */
- if (intensity & 0x0020)
- reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
- else
- set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
-
- if (intensity)
- set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
- else
- reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
-}
-#endif
-
-#ifdef CONFIG_MACH_AKITA
-void akita_bl_set_intensity(int intensity)
-{
- if (intensity > 0x10)
- intensity += 0x10;
-
- /* Bits 0-4 are accessed via the SSP interface */
- corgi_ssp_blduty_set(intensity & 0x1f);
-
- /* Bit 5 is via IO-Expander */
- if (intensity & 0x0020)
- akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
- else
- akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
-
- if (intensity)
- akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
- else
- akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
-}
-#endif
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 40dea3d5..efba65e 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -21,6 +21,7 @@
#include <asm/arch/ssp.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/regs-ssp.h>
#include "sharpsl.h"
static DEFINE_SPINLOCK(corgi_ssp_lock);
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c
new file mode 100644
index 0000000..cbc583b
--- /dev/null
+++ b/arch/arm/mach-pxa/cpu-pxa.c
@@ -0,0 +1,294 @@
+/*
+ * linux/arch/arm/mach-pxa/cpu-pxa.c
+ *
+ * Copyright (C) 2002,2003 Intrinsyc Software
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * History:
+ * 31-Jul-2002 : Initial version [FB]
+ * 29-Jan-2003 : added PXA255 support [FB]
+ * 20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.)
+ *
+ * Note:
+ * This driver may change the memory bus clock rate, but will not do any
+ * platform specific access timing changes... for example if you have flash
+ * memory connected to CS0, you will need to register a platform specific
+ * notifier which will adjust the memory access strobes to maintain a
+ * minimum strobe width.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
+
+#ifdef DEBUG
+static unsigned int freq_debug;
+MODULE_PARM(freq_debug, "i");
+MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
+#else
+#define freq_debug 0
+#endif
+
+typedef struct {
+ unsigned int khz;
+ unsigned int membus;
+ unsigned int cccr;
+ unsigned int div2;
+} pxa_freqs_t;
+
+/* Define the refresh period in mSec for the SDRAM and the number of rows */
+#define SDRAM_TREF 64 /* standard 64ms SDRAM */
+#define SDRAM_ROWS 4096 /* 64MB=8192 32MB=4096 */
+#define MDREFR_DRI(x) (((x) * SDRAM_TREF) / (SDRAM_ROWS * 32))
+
+#define CCLKCFG_TURBO 0x1
+#define CCLKCFG_FCS 0x2
+#define PXA25x_MIN_FREQ 99500
+#define PXA25x_MAX_FREQ 398100
+#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
+#define MDREFR_DRI_MASK 0xFFF
+
+
+/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
+static pxa_freqs_t pxa255_run_freqs[] =
+{
+ /* CPU MEMBUS CCCR DIV2*/
+ { 99500, 99500, 0x121, 1}, /* run= 99, turbo= 99, PXbus=50, SDRAM=50 */
+ {132700, 132700, 0x123, 1}, /* run=133, turbo=133, PXbus=66, SDRAM=66 */
+ {199100, 99500, 0x141, 0}, /* run=199, turbo=199, PXbus=99, SDRAM=99 */
+ {265400, 132700, 0x143, 1}, /* run=265, turbo=265, PXbus=133, SDRAM=66 */
+ {331800, 165900, 0x145, 1}, /* run=331, turbo=331, PXbus=166, SDRAM=83 */
+ {398100, 99500, 0x161, 0}, /* run=398, turbo=398, PXbus=196, SDRAM=99 */
+ {0,}
+};
+#define NUM_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
+
+static struct cpufreq_frequency_table pxa255_run_freq_table[NUM_RUN_FREQS+1];
+
+/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
+static pxa_freqs_t pxa255_turbo_freqs[] =
+{
+ /* CPU MEMBUS CCCR DIV2*/
+ { 99500, 99500, 0x121, 1}, /* run=99, turbo= 99, PXbus=50, SDRAM=50 */
+ {199100, 99500, 0x221, 0}, /* run=99, turbo=199, PXbus=50, SDRAM=99 */
+ {298500, 99500, 0x321, 0}, /* run=99, turbo=287, PXbus=50, SDRAM=99 */
+ {298600, 99500, 0x1c1, 0}, /* run=199, turbo=287, PXbus=99, SDRAM=99 */
+ {398100, 99500, 0x241, 0}, /* run=199, turbo=398, PXbus=99, SDRAM=99 */
+ {0,}
+};
+#define NUM_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
+
+static struct cpufreq_frequency_table pxa255_turbo_freq_table[NUM_TURBO_FREQS+1];
+
+extern unsigned get_clk_frequency_khz(int info);
+
+/* find a valid frequency point */
+static int pxa_verify_policy(struct cpufreq_policy *policy)
+{
+ struct cpufreq_frequency_table *pxa_freqs_table;
+ int ret;
+
+ if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
+ pxa_freqs_table = pxa255_run_freq_table;
+ } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
+ pxa_freqs_table = pxa255_turbo_freq_table;
+ } else {
+ printk("CPU PXA: Unknown policy found. "
+ "Using CPUFREQ_POLICY_PERFORMANCE\n");
+ pxa_freqs_table = pxa255_run_freq_table;
+ }
+
+ ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
+
+ if (freq_debug)
+ pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n",
+ policy->min, policy->max);
+
+ return ret;
+}
+
+static int pxa_set_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct cpufreq_frequency_table *pxa_freqs_table;
+ pxa_freqs_t *pxa_freq_settings;
+ struct cpufreq_freqs freqs;
+ int idx;
+ unsigned long flags;
+ unsigned int unused, preset_mdrefr, postset_mdrefr;
+ void *ramstart = phys_to_virt(0xa0000000);
+
+ /* Get the current policy */
+ if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
+ pxa_freq_settings = pxa255_run_freqs;
+ pxa_freqs_table = pxa255_run_freq_table;
+ } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
+ pxa_freq_settings = pxa255_turbo_freqs;
+ pxa_freqs_table = pxa255_turbo_freq_table;
+ } else {
+ printk("CPU PXA: Unknown policy found. "
+ "Using CPUFREQ_POLICY_PERFORMANCE\n");
+ pxa_freq_settings = pxa255_run_freqs;
+ pxa_freqs_table = pxa255_run_freq_table;
+ }
+
+ /* Lookup the next frequency */
+ if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
+ target_freq, relation, &idx)) {
+ return -EINVAL;
+ }
+
+ freqs.old = policy->cur;
+ freqs.new = pxa_freq_settings[idx].khz;
+ freqs.cpu = policy->cpu;
+
+ if (freq_debug)
+ pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
+ freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
+ (pxa_freq_settings[idx].membus / 2000) :
+ (pxa_freq_settings[idx].membus / 1000));
+
+ /*
+ * Tell everyone what we're about to do...
+ * you should add a notify client with any platform specific
+ * Vcc changing capability
+ */
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ /* Calculate the next MDREFR. If we're slowing down the SDRAM clock
+ * we need to preset the smaller DRI before the change. If we're speeding
+ * up we need to set the larger DRI value after the change.
+ */
+ preset_mdrefr = postset_mdrefr = MDREFR;
+ if ((MDREFR & MDREFR_DRI_MASK) > MDREFR_DRI(pxa_freq_settings[idx].membus)) {
+ preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK) |
+ MDREFR_DRI(pxa_freq_settings[idx].membus);
+ }
+ postset_mdrefr = (postset_mdrefr & ~MDREFR_DRI_MASK) |
+ MDREFR_DRI(pxa_freq_settings[idx].membus);
+
+ /* If we're dividing the memory clock by two for the SDRAM clock, this
+ * must be set prior to the change. Clearing the divide must be done
+ * after the change.
+ */
+ if (pxa_freq_settings[idx].div2) {
+ preset_mdrefr |= MDREFR_DB2_MASK;
+ postset_mdrefr |= MDREFR_DB2_MASK;
+ } else {
+ postset_mdrefr &= ~MDREFR_DB2_MASK;
+ }
+
+ local_irq_save(flags);
+
+ /* Set new the CCCR */
+ CCCR = pxa_freq_settings[idx].cccr;
+
+ asm volatile(" \n\
+ ldr r4, [%1] /* load MDREFR */ \n\
+ b 2f \n\
+ .align 5 \n\
+1: \n\
+ str %4, [%1] /* preset the MDREFR */ \n\
+ mcr p14, 0, %2, c6, c0, 0 /* set CCLKCFG[FCS] */ \n\
+ str %5, [%1] /* postset the MDREFR */ \n\
+ \n\
+ b 3f \n\
+2: b 1b \n\
+3: nop \n\
+ "
+ : "=&r" (unused)
+ : "r" (&MDREFR), "r" (CCLKCFG_TURBO|CCLKCFG_FCS), "r" (ramstart),
+ "r" (preset_mdrefr), "r" (postset_mdrefr)
+ : "r4", "r5");
+ local_irq_restore(flags);
+
+ /*
+ * Tell everyone what we've just done...
+ * you should add a notify client with any platform specific
+ * SDRAM refresh timer adjustments
+ */
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return 0;
+}
+
+static int pxa_cpufreq_init(struct cpufreq_policy *policy)
+{
+ int i;
+
+ /* set default policy and cpuinfo */
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->policy = CPUFREQ_POLICY_PERFORMANCE;
+ policy->cpuinfo.max_freq = PXA25x_MAX_FREQ;
+ policy->cpuinfo.min_freq = PXA25x_MIN_FREQ;
+ policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
+ policy->cur = get_clk_frequency_khz(0); /* current freq */
+ policy->min = policy->max = policy->cur;
+
+ /* Generate the run cpufreq_frequency_table struct */
+ for (i = 0; i < NUM_RUN_FREQS; i++) {
+ pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
+ pxa255_run_freq_table[i].index = i;
+ }
+
+ pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
+ /* Generate the turbo cpufreq_frequency_table struct */
+ for (i = 0; i < NUM_TURBO_FREQS; i++) {
+ pxa255_turbo_freq_table[i].frequency = pxa255_turbo_freqs[i].khz;
+ pxa255_turbo_freq_table[i].index = i;
+ }
+ pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+ printk(KERN_INFO "PXA CPU frequency change support initialized\n");
+
+ return 0;
+}
+
+static struct cpufreq_driver pxa_cpufreq_driver = {
+ .verify = pxa_verify_policy,
+ .target = pxa_set_target,
+ .init = pxa_cpufreq_init,
+ .name = "PXA25x",
+};
+
+static int __init pxa_cpu_init(void)
+{
+ int ret = -ENODEV;
+ if (cpu_is_pxa25x())
+ ret = cpufreq_register_driver(&pxa_cpufreq_driver);
+ return ret;
+}
+
+static void __exit pxa_cpu_exit(void)
+{
+ if (cpu_is_pxa25x())
+ cpufreq_unregister_driver(&pxa_cpufreq_driver);
+}
+
+
+MODULE_AUTHOR ("Intrinsyc Software Inc.");
+MODULE_DESCRIPTION ("CPU frequency changing driver for the PXA architecture");
+MODULE_LICENSE("GPL");
+module_init(pxa_cpu_init);
+module_exit(pxa_cpu_exit);
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
new file mode 100644
index 0000000..50ff453
--- /dev/null
+++ b/arch/arm/mach-pxa/devices.c
@@ -0,0 +1,662 @@
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/udc.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/i2c.h>
+
+#include "devices.h"
+
+void __init pxa_register_device(struct platform_device *dev, void *data)
+{
+ int ret;
+
+ dev->dev.platform_data = data;
+
+ ret = platform_device_register(dev);
+ if (ret)
+ dev_err(&dev->dev, "unable to register device: %d\n", ret);
+}
+
+static struct resource pxamci_resources[] = {
+ [0] = {
+ .start = 0x41100000,
+ .end = 0x41100fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_MMC,
+ .end = IRQ_MMC,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = 21,
+ .end = 21,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = 22,
+ .end = 22,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static u64 pxamci_dmamask = 0xffffffffUL;
+
+struct platform_device pxa_device_mci = {
+ .name = "pxa2xx-mci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &pxamci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxamci_resources),
+ .resource = pxamci_resources,
+};
+
+void __init pxa_set_mci_info(struct pxamci_platform_data *info)
+{
+ pxa_register_device(&pxa_device_mci, info);
+}
+
+
+static struct pxa2xx_udc_mach_info pxa_udc_info;
+
+void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
+{
+ memcpy(&pxa_udc_info, info, sizeof *info);
+}
+
+static struct resource pxa2xx_udc_resources[] = {
+ [0] = {
+ .start = 0x40600000,
+ .end = 0x4060ffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USB,
+ .end = IRQ_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 udc_dma_mask = ~(u32)0;
+
+struct platform_device pxa_device_udc = {
+ .name = "pxa2xx-udc",
+ .id = -1,
+ .resource = pxa2xx_udc_resources,
+ .num_resources = ARRAY_SIZE(pxa2xx_udc_resources),
+ .dev = {
+ .platform_data = &pxa_udc_info,
+ .dma_mask = &udc_dma_mask,
+ }
+};
+
+static struct resource pxafb_resources[] = {
+ [0] = {
+ .start = 0x44000000,
+ .end = 0x4400ffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_LCD,
+ .end = IRQ_LCD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 fb_dma_mask = ~(u64)0;
+
+struct platform_device pxa_device_fb = {
+ .name = "pxa2xx-fb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &fb_dma_mask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxafb_resources),
+ .resource = pxafb_resources,
+};
+
+void __init set_pxa_fb_info(struct pxafb_mach_info *info)
+{
+ pxa_register_device(&pxa_device_fb, info);
+}
+
+void __init set_pxa_fb_parent(struct device *parent_dev)
+{
+ pxa_device_fb.dev.parent = parent_dev;
+}
+
+static struct resource pxa_resource_ffuart[] = {
+ {
+ .start = __PREG(FFUART),
+ .end = __PREG(FFUART) + 35,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_FFUART,
+ .end = IRQ_FFUART,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device pxa_device_ffuart= {
+ .name = "pxa2xx-uart",
+ .id = 0,
+ .resource = pxa_resource_ffuart,
+ .num_resources = ARRAY_SIZE(pxa_resource_ffuart),
+};
+
+static struct resource pxa_resource_btuart[] = {
+ {
+ .start = __PREG(BTUART),
+ .end = __PREG(BTUART) + 35,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_BTUART,
+ .end = IRQ_BTUART,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device pxa_device_btuart = {
+ .name = "pxa2xx-uart",
+ .id = 1,
+ .resource = pxa_resource_btuart,
+ .num_resources = ARRAY_SIZE(pxa_resource_btuart),
+};
+
+static struct resource pxa_resource_stuart[] = {
+ {
+ .start = __PREG(STUART),
+ .end = __PREG(STUART) + 35,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_STUART,
+ .end = IRQ_STUART,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device pxa_device_stuart = {
+ .name = "pxa2xx-uart",
+ .id = 2,
+ .resource = pxa_resource_stuart,
+ .num_resources = ARRAY_SIZE(pxa_resource_stuart),
+};
+
+static struct resource pxa_resource_hwuart[] = {
+ {
+ .start = __PREG(HWUART),
+ .end = __PREG(HWUART) + 47,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_HWUART,
+ .end = IRQ_HWUART,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device pxa_device_hwuart = {
+ .name = "pxa2xx-uart",
+ .id = 3,
+ .resource = pxa_resource_hwuart,
+ .num_resources = ARRAY_SIZE(pxa_resource_hwuart),
+};
+
+static struct resource pxai2c_resources[] = {
+ {
+ .start = 0x40301680,
+ .end = 0x403016a3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_I2C,
+ .end = IRQ_I2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa_device_i2c = {
+ .name = "pxa2xx-i2c",
+ .id = 0,
+ .resource = pxai2c_resources,
+ .num_resources = ARRAY_SIZE(pxai2c_resources),
+};
+
+void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
+{
+ pxa_register_device(&pxa_device_i2c, info);
+}
+
+static struct resource pxai2s_resources[] = {
+ {
+ .start = 0x40400000,
+ .end = 0x40400083,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_I2S,
+ .end = IRQ_I2S,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa_device_i2s = {
+ .name = "pxa2xx-i2s",
+ .id = -1,
+ .resource = pxai2s_resources,
+ .num_resources = ARRAY_SIZE(pxai2s_resources),
+};
+
+static u64 pxaficp_dmamask = ~(u32)0;
+
+struct platform_device pxa_device_ficp = {
+ .name = "pxa2xx-ir",
+ .id = -1,
+ .dev = {
+ .dma_mask = &pxaficp_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
+{
+ pxa_register_device(&pxa_device_ficp, info);
+}
+
+struct platform_device pxa_device_rtc = {
+ .name = "sa1100-rtc",
+ .id = -1,
+};
+
+#ifdef CONFIG_PXA25x
+
+static u64 pxa25x_ssp_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa25x_resource_ssp[] = {
+ [0] = {
+ .start = 0x41000000,
+ .end = 0x4100001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP,
+ .end = IRQ_SSP,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* DRCMR for RX */
+ .start = 13,
+ .end = 13,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ /* DRCMR for TX */
+ .start = 14,
+ .end = 14,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device pxa25x_device_ssp = {
+ .name = "pxa25x-ssp",
+ .id = 0,
+ .dev = {
+ .dma_mask = &pxa25x_ssp_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa25x_resource_ssp,
+ .num_resources = ARRAY_SIZE(pxa25x_resource_ssp),
+};
+
+static u64 pxa25x_nssp_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa25x_resource_nssp[] = {
+ [0] = {
+ .start = 0x41400000,
+ .end = 0x4140002f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_NSSP,
+ .end = IRQ_NSSP,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* DRCMR for RX */
+ .start = 15,
+ .end = 15,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ /* DRCMR for TX */
+ .start = 16,
+ .end = 16,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device pxa25x_device_nssp = {
+ .name = "pxa25x-nssp",
+ .id = 1,
+ .dev = {
+ .dma_mask = &pxa25x_nssp_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa25x_resource_nssp,
+ .num_resources = ARRAY_SIZE(pxa25x_resource_nssp),
+};
+
+static u64 pxa25x_assp_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa25x_resource_assp[] = {
+ [0] = {
+ .start = 0x41500000,
+ .end = 0x4150002f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_ASSP,
+ .end = IRQ_ASSP,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* DRCMR for RX */
+ .start = 23,
+ .end = 23,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ /* DRCMR for TX */
+ .start = 24,
+ .end = 24,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device pxa25x_device_assp = {
+ /* ASSP is basically equivalent to NSSP */
+ .name = "pxa25x-nssp",
+ .id = 2,
+ .dev = {
+ .dma_mask = &pxa25x_assp_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa25x_resource_assp,
+ .num_resources = ARRAY_SIZE(pxa25x_resource_assp),
+};
+#endif /* CONFIG_PXA25x */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+
+static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ohci[] = {
+ [0] = {
+ .start = 0x4C000000,
+ .end = 0x4C00ff6f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBH1,
+ .end = IRQ_USBH1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa27x_device_ohci = {
+ .name = "pxa27x-ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &pxa27x_ohci_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(pxa27x_resource_ohci),
+ .resource = pxa27x_resource_ohci,
+};
+
+void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
+{
+ pxa_register_device(&pxa27x_device_ohci, info);
+}
+
+static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ssp1[] = {
+ [0] = {
+ .start = 0x41000000,
+ .end = 0x4100003f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP,
+ .end = IRQ_SSP,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* DRCMR for RX */
+ .start = 13,
+ .end = 13,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ /* DRCMR for TX */
+ .start = 14,
+ .end = 14,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device pxa27x_device_ssp1 = {
+ .name = "pxa27x-ssp",
+ .id = 0,
+ .dev = {
+ .dma_mask = &pxa27x_ssp1_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa27x_resource_ssp1,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_ssp1),
+};
+
+static u64 pxa27x_ssp2_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ssp2[] = {
+ [0] = {
+ .start = 0x41700000,
+ .end = 0x4170003f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP2,
+ .end = IRQ_SSP2,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* DRCMR for RX */
+ .start = 15,
+ .end = 15,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ /* DRCMR for TX */
+ .start = 16,
+ .end = 16,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device pxa27x_device_ssp2 = {
+ .name = "pxa27x-ssp",
+ .id = 1,
+ .dev = {
+ .dma_mask = &pxa27x_ssp2_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa27x_resource_ssp2,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_ssp2),
+};
+
+static u64 pxa27x_ssp3_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa27x_resource_ssp3[] = {
+ [0] = {
+ .start = 0x41900000,
+ .end = 0x4190003f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP3,
+ .end = IRQ_SSP3,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* DRCMR for RX */
+ .start = 66,
+ .end = 66,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ /* DRCMR for TX */
+ .start = 67,
+ .end = 67,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device pxa27x_device_ssp3 = {
+ .name = "pxa27x-ssp",
+ .id = 2,
+ .dev = {
+ .dma_mask = &pxa27x_ssp3_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa27x_resource_ssp3,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_ssp3),
+};
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+
+#ifdef CONFIG_PXA3xx
+static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa3xx_resource_ssp4[] = {
+ [0] = {
+ .start = 0x41a00000,
+ .end = 0x41a0003f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SSP4,
+ .end = IRQ_SSP4,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* DRCMR for RX */
+ .start = 2,
+ .end = 2,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ /* DRCMR for TX */
+ .start = 3,
+ .end = 3,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device pxa3xx_device_ssp4 = {
+ /* PXA3xx SSP is basically equivalent to PXA27x */
+ .name = "pxa27x-ssp",
+ .id = 3,
+ .dev = {
+ .dma_mask = &pxa3xx_ssp4_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa3xx_resource_ssp4,
+ .num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4),
+};
+
+static struct resource pxa3xx_resources_mci2[] = {
+ [0] = {
+ .start = 0x42000000,
+ .end = 0x42000fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_MMC2,
+ .end = IRQ_MMC2,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = 93,
+ .end = 93,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = 94,
+ .end = 94,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device pxa3xx_device_mci2 = {
+ .name = "pxa2xx-mci",
+ .id = 1,
+ .dev = {
+ .dma_mask = &pxamci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_mci2),
+ .resource = pxa3xx_resources_mci2,
+};
+
+void __init pxa3xx_set_mci2_info(struct pxamci_platform_data *info)
+{
+ pxa_register_device(&pxa3xx_device_mci2, info);
+}
+
+static struct resource pxa3xx_resources_mci3[] = {
+ [0] = {
+ .start = 0x42500000,
+ .end = 0x42500fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_MMC3,
+ .end = IRQ_MMC3,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = 100,
+ .end = 100,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = 101,
+ .end = 101,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device pxa3xx_device_mci3 = {
+ .name = "pxa2xx-mci",
+ .id = 2,
+ .dev = {
+ .dma_mask = &pxamci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_mci3),
+ .resource = pxa3xx_resources_mci3,
+};
+
+void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
+{
+ pxa_register_device(&pxa3xx_device_mci3, info);
+}
+
+#endif /* CONFIG_PXA3xx */
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 94c8d5c..96c7c89 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -1,4 +1,6 @@
extern struct platform_device pxa_device_mci;
+extern struct platform_device pxa3xx_device_mci2;
+extern struct platform_device pxa3xx_device_mci3;
extern struct platform_device pxa_device_udc;
extern struct platform_device pxa_device_fb;
extern struct platform_device pxa_device_ffuart;
@@ -12,3 +14,13 @@
extern struct platform_device pxa27x_device_i2c_power;
extern struct platform_device pxa27x_device_ohci;
+
+extern struct platform_device pxa25x_device_ssp;
+extern struct platform_device pxa25x_device_nssp;
+extern struct platform_device pxa25x_device_assp;
+extern struct platform_device pxa27x_device_ssp1;
+extern struct platform_device pxa27x_device_ssp2;
+extern struct platform_device pxa27x_device_ssp3;
+extern struct platform_device pxa3xx_device_ssp4;
+
+void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
new file mode 100644
index 0000000..ee0ae93
--- /dev/null
+++ b/arch/arm/mach-pxa/eseries.c
@@ -0,0 +1,101 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/hardware.h>
+#include <asm/mach-types.h>
+
+#include <generic.h>
+
+/* Only e800 has 128MB RAM */
+static void __init eseries_fixup(struct machine_desc *desc,
+ struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+ mi->nr_banks=1;
+ mi->bank[0].start = 0xa0000000;
+ mi->bank[0].node = 0;
+ if (machine_is_e800())
+ mi->bank[0].size = (128*1024*1024);
+ else
+ mi->bank[0].size = (64*1024*1024);
+}
+
+/* e-series machine definitions */
+
+#ifdef CONFIG_MACH_E330
+MACHINE_START(E330, "Toshiba e330")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E740
+MACHINE_START(E740, "Toshiba e740")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E750
+MACHINE_START(E750, "Toshiba e750")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E400
+MACHINE_START(E400, "Toshiba e400")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E800
+MACHINE_START(E800, "Toshiba e800")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 1c34946..698aeec 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -20,7 +20,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
-#include <linux/platform_device.h>
#include <linux/ioport.h>
#include <linux/pm.h>
#include <linux/string.h>
@@ -33,13 +32,7 @@
#include <asm/arch/pxa-regs.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/i2c.h>
-#include "devices.h"
#include "generic.h"
/*
@@ -203,7 +196,7 @@
}, { /* Mem Ctl */
.virtual = 0xf6000000,
.pfn = __phys_to_pfn(0x48000000),
- .length = 0x00100000,
+ .length = 0x00200000,
.type = MT_DEVICE
}, { /* USB host */
.virtual = 0xf8000000,
@@ -233,245 +226,3 @@
iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
get_clk_frequency_khz(1);
}
-
-
-static struct resource pxamci_resources[] = {
- [0] = {
- .start = 0x41100000,
- .end = 0x41100fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_MMC,
- .end = IRQ_MMC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 pxamci_dmamask = 0xffffffffUL;
-
-struct platform_device pxa_device_mci = {
- .name = "pxa2xx-mci",
- .id = -1,
- .dev = {
- .dma_mask = &pxamci_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(pxamci_resources),
- .resource = pxamci_resources,
-};
-
-void __init pxa_set_mci_info(struct pxamci_platform_data *info)
-{
- pxa_device_mci.dev.platform_data = info;
-}
-
-
-static struct pxa2xx_udc_mach_info pxa_udc_info;
-
-void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
-{
- memcpy(&pxa_udc_info, info, sizeof *info);
-}
-
-static struct resource pxa2xx_udc_resources[] = {
- [0] = {
- .start = 0x40600000,
- .end = 0x4060ffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USB,
- .end = IRQ_USB,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 udc_dma_mask = ~(u32)0;
-
-struct platform_device pxa_device_udc = {
- .name = "pxa2xx-udc",
- .id = -1,
- .resource = pxa2xx_udc_resources,
- .num_resources = ARRAY_SIZE(pxa2xx_udc_resources),
- .dev = {
- .platform_data = &pxa_udc_info,
- .dma_mask = &udc_dma_mask,
- }
-};
-
-static struct resource pxafb_resources[] = {
- [0] = {
- .start = 0x44000000,
- .end = 0x4400ffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_LCD,
- .end = IRQ_LCD,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 fb_dma_mask = ~(u64)0;
-
-struct platform_device pxa_device_fb = {
- .name = "pxa2xx-fb",
- .id = -1,
- .dev = {
- .dma_mask = &fb_dma_mask,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(pxafb_resources),
- .resource = pxafb_resources,
-};
-
-void __init set_pxa_fb_info(struct pxafb_mach_info *info)
-{
- pxa_device_fb.dev.platform_data = info;
-}
-
-void __init set_pxa_fb_parent(struct device *parent_dev)
-{
- pxa_device_fb.dev.parent = parent_dev;
-}
-
-static struct resource pxa_resource_ffuart[] = {
- {
- .start = __PREG(FFUART),
- .end = __PREG(FFUART) + 35,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_FFUART,
- .end = IRQ_FFUART,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device pxa_device_ffuart= {
- .name = "pxa2xx-uart",
- .id = 0,
- .resource = pxa_resource_ffuart,
- .num_resources = ARRAY_SIZE(pxa_resource_ffuart),
-};
-
-static struct resource pxa_resource_btuart[] = {
- {
- .start = __PREG(BTUART),
- .end = __PREG(BTUART) + 35,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_BTUART,
- .end = IRQ_BTUART,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device pxa_device_btuart = {
- .name = "pxa2xx-uart",
- .id = 1,
- .resource = pxa_resource_btuart,
- .num_resources = ARRAY_SIZE(pxa_resource_btuart),
-};
-
-static struct resource pxa_resource_stuart[] = {
- {
- .start = __PREG(STUART),
- .end = __PREG(STUART) + 35,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_STUART,
- .end = IRQ_STUART,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device pxa_device_stuart = {
- .name = "pxa2xx-uart",
- .id = 2,
- .resource = pxa_resource_stuart,
- .num_resources = ARRAY_SIZE(pxa_resource_stuart),
-};
-
-static struct resource pxa_resource_hwuart[] = {
- {
- .start = __PREG(HWUART),
- .end = __PREG(HWUART) + 47,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_HWUART,
- .end = IRQ_HWUART,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device pxa_device_hwuart = {
- .name = "pxa2xx-uart",
- .id = 3,
- .resource = pxa_resource_hwuart,
- .num_resources = ARRAY_SIZE(pxa_resource_hwuart),
-};
-
-static struct resource pxai2c_resources[] = {
- {
- .start = 0x40301680,
- .end = 0x403016a3,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_I2C,
- .end = IRQ_I2C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device pxa_device_i2c = {
- .name = "pxa2xx-i2c",
- .id = 0,
- .resource = pxai2c_resources,
- .num_resources = ARRAY_SIZE(pxai2c_resources),
-};
-
-void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
-{
- pxa_device_i2c.dev.platform_data = info;
-}
-
-static struct resource pxai2s_resources[] = {
- {
- .start = 0x40400000,
- .end = 0x40400083,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_I2S,
- .end = IRQ_I2S,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device pxa_device_i2s = {
- .name = "pxa2xx-i2s",
- .id = -1,
- .resource = pxai2s_resources,
- .num_resources = ARRAY_SIZE(pxai2s_resources),
-};
-
-static u64 pxaficp_dmamask = ~(u32)0;
-
-struct platform_device pxa_device_ficp = {
- .name = "pxa2xx-ir",
- .id = -1,
- .dev = {
- .dma_mask = &pxaficp_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
-{
- pxa_device_ficp.dev.platform_data = info;
-}
-
-struct platform_device pxa_device_rtc = {
- .name = "sa1100-rtc",
- .id = -1,
-};
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 465108d..0a94344 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -54,7 +54,7 @@
[1] = {
.start = IRQ_GPIO(4),
.end = IRQ_GPIO(4),
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
new file mode 100644
index 0000000..0a4b54c
--- /dev/null
+++ b/arch/arm/mach-pxa/littleton.c
@@ -0,0 +1,325 @@
+/*
+ * linux/arch/arm/mach-pxa/littleton.c
+ *
+ * Support for the Marvell Littleton Development Platform.
+ *
+ * Author: Jason Chagas (largely modified code)
+ * Created: Nov 20, 2006
+ * Copyright: (C) Copyright 2006 Marvell International Ltd.
+ *
+ * 2007-11-22 modified to align with latest kernel
+ * eric miao <eric.miao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/mfp-pxa300.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/ssp.h>
+#include <asm/arch/littleton.h>
+
+#include "generic.h"
+
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
+/* Littleton MFP configurations */
+static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
+ /* LCD */
+ GPIO54_LCD_LDD_0,
+ GPIO55_LCD_LDD_1,
+ GPIO56_LCD_LDD_2,
+ GPIO57_LCD_LDD_3,
+ GPIO58_LCD_LDD_4,
+ GPIO59_LCD_LDD_5,
+ GPIO60_LCD_LDD_6,
+ GPIO61_LCD_LDD_7,
+ GPIO62_LCD_LDD_8,
+ GPIO63_LCD_LDD_9,
+ GPIO64_LCD_LDD_10,
+ GPIO65_LCD_LDD_11,
+ GPIO66_LCD_LDD_12,
+ GPIO67_LCD_LDD_13,
+ GPIO68_LCD_LDD_14,
+ GPIO69_LCD_LDD_15,
+ GPIO70_LCD_LDD_16,
+ GPIO71_LCD_LDD_17,
+ GPIO72_LCD_FCLK,
+ GPIO73_LCD_LCLK,
+ GPIO74_LCD_PCLK,
+ GPIO75_LCD_BIAS,
+
+ /* SSP2 */
+ GPIO25_SSP2_SCLK,
+ GPIO17_SSP2_FRM,
+ GPIO27_SSP2_TXD,
+
+ /* Debug Ethernet */
+ GPIO90_GPIO,
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = (LITTLETON_ETH_PHYS + 0x300),
+ .end = (LITTLETON_ETH_PHYS + 0xfffff),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
+ .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+ }
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULES)
+/* use bit 30, 31 as the indicator of command parameter number */
+#define CMD0(x) ((0x00000000) | ((x) << 9))
+#define CMD1(x, x1) ((0x40000000) | ((x) << 9) | 0x100 | (x1))
+#define CMD2(x, x1, x2) ((0x80000000) | ((x) << 18) | 0x20000 |\
+ ((x1) << 9) | 0x100 | (x2))
+
+static uint32_t lcd_panel_reset[] = {
+ CMD0(0x1), /* reset */
+ CMD0(0x0), /* nop */
+ CMD0(0x0), /* nop */
+ CMD0(0x0), /* nop */
+};
+
+static uint32_t lcd_panel_on[] = {
+ CMD0(0x29), /* Display ON */
+ CMD2(0xB8, 0xFF, 0xF9), /* Output Control */
+ CMD0(0x11), /* Sleep out */
+ CMD1(0xB0, 0x16), /* Wake */
+};
+
+static uint32_t lcd_panel_off[] = {
+ CMD0(0x28), /* Display OFF */
+ CMD2(0xB8, 0x80, 0x02), /* Output Control */
+ CMD0(0x10), /* Sleep in */
+ CMD1(0xB0, 0x00), /* Deep stand by in */
+};
+
+static uint32_t lcd_vga_pass_through[] = {
+ CMD1(0xB0, 0x16),
+ CMD1(0xBC, 0x80),
+ CMD1(0xE1, 0x00),
+ CMD1(0x36, 0x50),
+ CMD1(0x3B, 0x00),
+};
+
+static uint32_t lcd_qvga_pass_through[] = {
+ CMD1(0xB0, 0x16),
+ CMD1(0xBC, 0x81),
+ CMD1(0xE1, 0x00),
+ CMD1(0x36, 0x50),
+ CMD1(0x3B, 0x22),
+};
+
+static uint32_t lcd_vga_transfer[] = {
+ CMD1(0xcf, 0x02), /* Blanking period control (1) */
+ CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */
+ CMD1(0xd1, 0x01), /* CKV timing control on/off */
+ CMD2(0xd2, 0x14, 0x00), /* CKV 1,2 timing control */
+ CMD2(0xd3, 0x1a, 0x0f), /* OEV timing control */
+ CMD2(0xd4, 0x1f, 0xaf), /* ASW timing control (1) */
+ CMD1(0xd5, 0x14), /* ASW timing control (2) */
+ CMD0(0x21), /* Invert for normally black display */
+ CMD0(0x29), /* Display on */
+};
+
+static uint32_t lcd_qvga_transfer[] = {
+ CMD1(0xd6, 0x02), /* Blanking period control (1) */
+ CMD2(0xd7, 0x08, 0x04), /* Blanking period control (2) */
+ CMD1(0xd8, 0x01), /* CKV timing control on/off */
+ CMD2(0xd9, 0x00, 0x08), /* CKV 1,2 timing control */
+ CMD2(0xde, 0x05, 0x0a), /* OEV timing control */
+ CMD2(0xdf, 0x0a, 0x19), /* ASW timing control (1) */
+ CMD1(0xe0, 0x0a), /* ASW timing control (2) */
+ CMD0(0x21), /* Invert for normally black display */
+ CMD0(0x29), /* Display on */
+};
+
+static uint32_t lcd_panel_config[] = {
+ CMD2(0xb8, 0xff, 0xf9), /* Output control */
+ CMD0(0x11), /* sleep out */
+ CMD1(0xba, 0x01), /* Display mode (1) */
+ CMD1(0xbb, 0x00), /* Display mode (2) */
+ CMD1(0x3a, 0x60), /* Display mode 18-bit RGB */
+ CMD1(0xbf, 0x10), /* Drive system change control */
+ CMD1(0xb1, 0x56), /* Booster operation setup */
+ CMD1(0xb2, 0x33), /* Booster mode setup */
+ CMD1(0xb3, 0x11), /* Booster frequency setup */
+ CMD1(0xb4, 0x02), /* Op amp/system clock */
+ CMD1(0xb5, 0x35), /* VCS voltage */
+ CMD1(0xb6, 0x40), /* VCOM voltage */
+ CMD1(0xb7, 0x03), /* External display signal */
+ CMD1(0xbd, 0x00), /* ASW slew rate */
+ CMD1(0xbe, 0x00), /* Dummy data for QuadData operation */
+ CMD1(0xc0, 0x11), /* Sleep out FR count (A) */
+ CMD1(0xc1, 0x11), /* Sleep out FR count (B) */
+ CMD1(0xc2, 0x11), /* Sleep out FR count (C) */
+ CMD2(0xc3, 0x20, 0x40), /* Sleep out FR count (D) */
+ CMD2(0xc4, 0x60, 0xc0), /* Sleep out FR count (E) */
+ CMD2(0xc5, 0x10, 0x20), /* Sleep out FR count (F) */
+ CMD1(0xc6, 0xc0), /* Sleep out FR count (G) */
+ CMD2(0xc7, 0x33, 0x43), /* Gamma 1 fine tuning (1) */
+ CMD1(0xc8, 0x44), /* Gamma 1 fine tuning (2) */
+ CMD1(0xc9, 0x33), /* Gamma 1 inclination adjustment */
+ CMD1(0xca, 0x00), /* Gamma 1 blue offset adjustment */
+ CMD2(0xec, 0x01, 0xf0), /* Horizontal clock cycles */
+};
+
+static void ssp_reconfig(struct ssp_dev *dev, int nparam)
+{
+ static int last_nparam = -1;
+
+ /* check if it is necessary to re-config SSP */
+ if (nparam == last_nparam)
+ return;
+
+ ssp_disable(dev);
+ ssp_config(dev, (nparam == 2) ? 0x0010058a : 0x00100581, 0x18, 0, 0);
+
+ last_nparam = nparam;
+}
+
+static void ssp_send_cmd(uint32_t *cmd, int num)
+{
+ static int ssp_initialized;
+ static struct ssp_dev ssp2;
+
+ int i;
+
+ if (!ssp_initialized) {
+ ssp_init(&ssp2, 2, SSP_NO_IRQ);
+ ssp_initialized = 1;
+ }
+
+ clk_enable(ssp2.ssp->clk);
+ for (i = 0; i < num; i++, cmd++) {
+ ssp_reconfig(&ssp2, (*cmd >> 30) & 0x3);
+ ssp_write_word(&ssp2, *cmd & 0x3fffffff);
+
+ /* FIXME: ssp_flush() is mandatory here to work */
+ ssp_flush(&ssp2);
+ }
+ clk_disable(ssp2.ssp->clk);
+}
+
+static void littleton_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+ if (on) {
+ ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_on));
+ ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_reset));
+ if (var->xres > 240) {
+ /* VGA */
+ ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_pass_through));
+ ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
+ ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_transfer));
+ } else {
+ /* QVGA */
+ ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_pass_through));
+ ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
+ ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_transfer));
+ }
+ } else
+ ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_off));
+}
+
+static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
+ [0] = {
+ /* VGA */
+ .pixclock = 38250,
+ .xres = 480,
+ .yres = 640,
+ .bpp = 16,
+ .hsync_len = 8,
+ .left_margin = 8,
+ .right_margin = 24,
+ .vsync_len = 2,
+ .upper_margin = 2,
+ .lower_margin = 4,
+ .sync = 0,
+ },
+ [1] = {
+ /* QVGA */
+ .pixclock = 153000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 8,
+ .left_margin = 8,
+ .right_margin = 88,
+ .vsync_len = 2,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info littleton_lcd_info = {
+ .modes = tpo_tdo24mtea1_modes,
+ .num_modes = 2,
+ .lccr0 = LCCR0_Act,
+ .lccr3 = LCCR3_HSP | LCCR3_VSP,
+ .pxafb_lcd_power = littleton_lcd_power,
+};
+
+static void littleton_init_lcd(void)
+{
+ set_pxa_fb_info(&littleton_lcd_info);
+}
+#else
+static inline void littleton_init_lcd(void) {};
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */
+
+static void __init littleton_init(void)
+{
+ /* initialize MFP configurations */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
+
+ /*
+ * Note: we depend bootloader set the correct
+ * value to MSC register for SMC91x.
+ */
+ platform_device_register(&smc91x_device);
+
+ littleton_init_lcd();
+}
+
+MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = littleton_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 78ebad0..afa62ff 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -38,6 +38,7 @@
#include <asm/mach/flash.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/lpd270.h>
#include <asm/arch/audio.h>
#include <asm/arch/pxafb.h>
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 1d3112d..e7ae4bb 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -41,6 +41,7 @@
#include <asm/hardware/sa1111.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/lubbock.h>
#include <asm/arch/udc.h>
#include <asm/arch/irda.h>
@@ -136,9 +137,13 @@
static int __init lubbock_irq_device_init(void)
{
- int ret = sysdev_class_register(&lubbock_irq_sysclass);
- if (ret == 0)
- ret = sysdev_register(&lubbock_irq_device);
+ int ret = -ENODEV;
+
+ if (machine_is_lubbock()) {
+ ret = sysdev_class_register(&lubbock_irq_sysclass);
+ if (ret == 0)
+ ret = sysdev_register(&lubbock_irq_device);
+ }
return ret;
}
@@ -191,7 +196,7 @@
[1] = {
.start = LUBBOCK_ETH_IRQ,
.end = LUBBOCK_ETH_IRQ,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
[2] = {
.name = "smc91x-attrib",
@@ -206,30 +211,13 @@
* (to J5) and poking board registers (as done below). Else it's only useful
* for the temperature sensors.
*/
-static struct resource pxa_ssp_resources[] = {
- [0] = {
- .start = __PREG(SSCR0_P(1)),
- .end = __PREG(SSCR0_P(1)) + 0x14,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SSP,
- .end = IRQ_SSP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
static struct pxa2xx_spi_master pxa_ssp_master_info = {
- .ssp_type = PXA25x_SSP,
- .clock_enable = CKEN_SSP,
.num_chipselect = 0,
};
static struct platform_device pxa_ssp = {
.name = "pxa2xx-spi",
.id = 1,
- .resource = pxa_ssp_resources,
- .num_resources = ARRAY_SIZE(pxa_ssp_resources),
.dev = {
.platform_data = &pxa_ssp_master_info,
},
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
new file mode 100644
index 0000000..d98ef7a
--- /dev/null
+++ b/arch/arm/mach-pxa/magician.c
@@ -0,0 +1,218 @@
+/*
+ * Support for HTC Magician PDA phones:
+ * i-mate JAM, O2 Xda mini, Orange SPV M500, Qtek s100, Qtek s110
+ * and T-Mobile MDA Compact.
+ *
+ * Copyright (c) 2006-2007 Philipp Zabel
+ *
+ * Based on hx4700.c, spitz.c and others.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/gpio.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/magician.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/ohci.h>
+
+#include "generic.h"
+
+/*
+ * IRDA
+ */
+
+static void magician_irda_transceiver_mode(struct device *dev, int mode)
+{
+ gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
+}
+
+static struct pxaficp_platform_data magician_ficp_info = {
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = magician_irda_transceiver_mode,
+};
+
+/*
+ * GPIO Keys
+ */
+
+static struct gpio_keys_button magician_button_table[] = {
+ {KEY_POWER, GPIO0_MAGICIAN_KEY_POWER, 0, "Power button"},
+ {KEY_ESC, GPIO37_MAGICIAN_KEY_HANGUP, 0, "Hangup button"},
+ {KEY_F10, GPIO38_MAGICIAN_KEY_CONTACTS, 0, "Contacts button"},
+ {KEY_CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, 0, "Calendar button"},
+ {KEY_CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, 0, "Camera button"},
+ {KEY_UP, GPIO93_MAGICIAN_KEY_UP, 0, "Up button"},
+ {KEY_DOWN, GPIO94_MAGICIAN_KEY_DOWN, 0, "Down button"},
+ {KEY_LEFT, GPIO95_MAGICIAN_KEY_LEFT, 0, "Left button"},
+ {KEY_RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, 0, "Right button"},
+ {KEY_KPENTER, GPIO97_MAGICIAN_KEY_ENTER, 0, "Action button"},
+ {KEY_RECORD, GPIO98_MAGICIAN_KEY_RECORD, 0, "Record button"},
+ {KEY_VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, 0, "Volume up"},
+ {KEY_VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, 0, "Volume down"},
+ {KEY_PHONE, GPIO102_MAGICIAN_KEY_PHONE, 0, "Phone button"},
+ {KEY_PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, 0, "Headset button"},
+};
+
+static struct gpio_keys_platform_data gpio_keys_data = {
+ .buttons = magician_button_table,
+ .nbuttons = ARRAY_SIZE(magician_button_table),
+};
+
+static struct platform_device gpio_keys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &gpio_keys_data,
+ },
+ .id = -1,
+};
+
+/*
+ * LCD - Toppoly TD028STEB1
+ */
+
+static struct pxafb_mode_info toppoly_modes[] = {
+ {
+ .pixclock = 96153,
+ .bpp = 16,
+ .xres = 240,
+ .yres = 320,
+ .hsync_len = 11,
+ .vsync_len = 3,
+ .left_margin = 19,
+ .upper_margin = 2,
+ .right_margin = 10,
+ .lower_margin = 2,
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info toppoly_info = {
+ .modes = toppoly_modes,
+ .num_modes = 1,
+ .fixed_modes = 1,
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = LCCR3_PixRsEdg,
+};
+
+/*
+ * Backlight
+ */
+
+static void magician_set_bl_intensity(int intensity)
+{
+ if (intensity) {
+ PWM_CTRL0 = 1;
+ PWM_PERVAL0 = 0xc8;
+ PWM_PWDUTY0 = intensity;
+ pxa_set_cken(CKEN_PWM0, 1);
+ } else {
+ pxa_set_cken(CKEN_PWM0, 0);
+ }
+}
+
+static struct generic_bl_info backlight_info = {
+ .default_intensity = 0x64,
+ .limit_mask = 0x0b,
+ .max_intensity = 0xc7,
+ .set_bl_intensity = magician_set_bl_intensity,
+};
+
+static struct platform_device backlight = {
+ .name = "corgi-bl",
+ .dev = {
+ .platform_data = &backlight_info,
+ },
+ .id = -1,
+};
+
+
+/*
+ * USB OHCI
+ */
+
+static int magician_ohci_init(struct device *dev)
+{
+ UHCHR = (UHCHR | UHCHR_SSEP2 | UHCHR_PCPL | UHCHR_CGR) &
+ ~(UHCHR_SSEP1 | UHCHR_SSEP3 | UHCHR_SSE);
+
+ return 0;
+}
+
+static struct pxaohci_platform_data magician_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .init = magician_ohci_init,
+ .power_budget = 0,
+};
+
+
+/*
+ * StrataFlash
+ */
+
+#define PXA_CS_SIZE 0x04000000
+
+static struct resource strataflash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + PXA_CS_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data strataflash_data = {
+ .width = 4,
+};
+
+static struct platform_device strataflash = {
+ .name = "physmap-flash",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &strataflash_resource,
+ .dev = {
+ .platform_data = &strataflash_data,
+ },
+};
+
+/*
+ * Platform devices
+ */
+
+static struct platform_device *devices[] __initdata = {
+ &gpio_keys,
+ &backlight,
+ &strataflash,
+};
+
+static void __init magician_init(void)
+{
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ pxa_set_ohci_info(&magician_ohci_info);
+ pxa_set_ficp_info(&magician_ficp_info);
+ set_pxa_fb_info(&toppoly_info);
+}
+
+
+MACHINE_START(MAGICIAN, "HTC Magician")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .init_machine = magician_init,
+ .timer = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 41d8c6c..345c3de 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -23,6 +23,7 @@
#include <linux/ioport.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/backlight.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -38,6 +39,7 @@
#include <asm/mach/flash.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/mainstone.h>
#include <asm/arch/audio.h>
#include <asm/arch/pxafb.h>
@@ -130,9 +132,13 @@
static int __init mainstone_irq_device_init(void)
{
- int ret = sysdev_class_register(&mainstone_irq_sysclass);
- if (ret == 0)
- ret = sysdev_register(&mainstone_irq_device);
+ int ret = -ENODEV;
+
+ if (machine_is_mainstone()) {
+ ret = sysdev_class_register(&mainstone_irq_sysclass);
+ if (ret == 0)
+ ret = sysdev_register(&mainstone_irq_device);
+ }
return ret;
}
@@ -150,7 +156,7 @@
[1] = {
.start = MAINSTONE_IRQ(3),
.end = MAINSTONE_IRQ(3),
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
@@ -263,22 +269,61 @@
},
};
-static void mainstone_backlight_power(int on)
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+static int mainstone_backlight_update_status(struct backlight_device *bl)
{
- if (on) {
+ int brightness = bl->props.brightness;
+
+ if (bl->props.power != FB_BLANK_UNBLANK ||
+ bl->props.fb_blank != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ if (brightness != 0) {
pxa_gpio_mode(GPIO16_PWM0_MD);
pxa_set_cken(CKEN_PWM0, 1);
- PWM_CTRL0 = 0;
- PWM_PWDUTY0 = 0x3ff;
- PWM_PERVAL0 = 0x3ff;
- } else {
- PWM_CTRL0 = 0;
- PWM_PWDUTY0 = 0x0;
- PWM_PERVAL0 = 0x3FF;
- pxa_set_cken(CKEN_PWM0, 0);
}
+ PWM_CTRL0 = 0;
+ PWM_PWDUTY0 = brightness;
+ PWM_PERVAL0 = bl->props.max_brightness;
+ if (brightness == 0)
+ pxa_set_cken(CKEN_PWM0, 0);
+ return 0; /* pointless return value */
}
+static int mainstone_backlight_get_brightness(struct backlight_device *bl)
+{
+ return PWM_PWDUTY0;
+}
+
+static /*const*/ struct backlight_ops mainstone_backlight_ops = {
+ .update_status = mainstone_backlight_update_status,
+ .get_brightness = mainstone_backlight_get_brightness,
+};
+
+static void __init mainstone_backlight_register(void)
+{
+ struct backlight_device *bl;
+
+ bl = backlight_device_register("mainstone-bl", &pxa_device_fb.dev,
+ NULL, &mainstone_backlight_ops);
+ if (IS_ERR(bl)) {
+ printk(KERN_ERR "mainstone: unable to register backlight: %ld\n",
+ PTR_ERR(bl));
+ return;
+ }
+
+ /*
+ * broken design - register-then-setup interfaces are
+ * utterly broken by definition.
+ */
+ bl->props.max_brightness = 1023;
+ bl->props.brightness = 1023;
+ backlight_update_status(bl);
+}
+#else
+#define mainstone_backlight_register() do { } while (0)
+#endif
+
static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
.pixclock = 50000,
.xres = 640,
@@ -311,7 +356,6 @@
.num_modes = 1,
.lccr0 = LCCR0_Act,
.lccr3 = LCCR3_PCP,
- .pxafb_backlight_power = mainstone_backlight_power,
};
static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_int, void *data)
@@ -335,12 +379,10 @@
err = request_irq(MAINSTONE_MMC_IRQ, mstone_detect_int, IRQF_DISABLED,
"MMC card detect", data);
- if (err) {
+ if (err)
printk(KERN_ERR "mainstone_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
- return -1;
- }
- return 0;
+ return err;
}
static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)
@@ -473,6 +515,7 @@
mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
set_pxa_fb_info(&mainstone_pxafb_info);
+ mainstone_backlight_register();
pxa_set_mci_info(&mainstone_mci_platform_data);
pxa_set_ficp_info(&mainstone_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/mfp.c b/arch/arm/mach-pxa/mfp.c
index 436f965..ec1b2d8 100644
--- a/arch/arm/mach-pxa/mfp.c
+++ b/arch/arm/mach-pxa/mfp.c
@@ -17,9 +17,11 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/sysdev.h>
#include <asm/hardware.h>
#include <asm/arch/mfp.h>
+#include <asm/arch/mfp-pxa3xx.h>
/* mfp_spin_lock is used to ensure that MFP register configuration
* (most likely a read-modify-write operation) is atomic, and that
@@ -28,43 +30,110 @@
static DEFINE_SPINLOCK(mfp_spin_lock);
static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE);
+
+struct pxa3xx_mfp_pin {
+ unsigned long config; /* -1 for not configured */
+ unsigned long mfpr_off; /* MFPRxx Register offset */
+ unsigned long mfpr_run; /* Run-Mode Register Value */
+ unsigned long mfpr_lpm; /* Low Power Mode Register Value */
+};
+
static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX];
+/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
+const static unsigned long mfpr_lpm[] = {
+ MFPR_LPM_INPUT,
+ MFPR_LPM_DRIVE_LOW,
+ MFPR_LPM_DRIVE_HIGH,
+ MFPR_LPM_PULL_LOW,
+ MFPR_LPM_PULL_HIGH,
+ MFPR_LPM_FLOAT,
+};
+
+/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
+const static unsigned long mfpr_pull[] = {
+ MFPR_PULL_NONE,
+ MFPR_PULL_LOW,
+ MFPR_PULL_HIGH,
+ MFPR_PULL_BOTH,
+};
+
+/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
+const static unsigned long mfpr_edge[] = {
+ MFPR_EDGE_NONE,
+ MFPR_EDGE_RISE,
+ MFPR_EDGE_FALL,
+ MFPR_EDGE_BOTH,
+};
+
#define mfpr_readl(off) \
__raw_readl(mfpr_mmio_base + (off))
#define mfpr_writel(off, val) \
__raw_writel(val, mfpr_mmio_base + (off))
+#define mfp_configured(p) ((p)->config != -1)
+
/*
* perform a read-back of any MFPR register to make sure the
* previous writings are finished
*/
#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0)
-static inline void __mfp_config(int pin, unsigned long val)
+static inline void __mfp_config_run(struct pxa3xx_mfp_pin *p)
{
- unsigned long off = mfp_table[pin].mfpr_off;
-
- mfp_table[pin].mfpr_val = val;
- mfpr_writel(off, val);
+ if (mfp_configured(p))
+ mfpr_writel(p->mfpr_off, p->mfpr_run);
}
-void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num)
+static inline void __mfp_config_lpm(struct pxa3xx_mfp_pin *p)
{
- int i, pin;
- unsigned long val, flags;
- mfp_cfg_t *mfp_cfg = mfp_cfgs;
+ if (mfp_configured(p)) {
+ unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
+ if (mfpr_clr != p->mfpr_run)
+ mfpr_writel(p->mfpr_off, mfpr_clr);
+ if (p->mfpr_lpm != mfpr_clr)
+ mfpr_writel(p->mfpr_off, p->mfpr_lpm);
+ }
+}
+
+void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num)
+{
+ unsigned long flags;
+ int i;
spin_lock_irqsave(&mfp_spin_lock, flags);
- for (i = 0; i < num; i++, mfp_cfg++) {
- pin = MFP_CFG_PIN(*mfp_cfg);
- val = MFP_CFG_VAL(*mfp_cfg);
+ for (i = 0; i < num; i++, mfp_cfgs++) {
+ unsigned long tmp, c = *mfp_cfgs;
+ struct pxa3xx_mfp_pin *p;
+ int pin, af, drv, lpm, edge, pull;
+ pin = MFP_PIN(c);
BUG_ON(pin >= MFP_PIN_MAX);
+ p = &mfp_table[pin];
- __mfp_config(pin, val);
+ af = MFP_AF(c);
+ drv = MFP_DS(c);
+ lpm = MFP_LPM_STATE(c);
+ edge = MFP_LPM_EDGE(c);
+ pull = MFP_PULL(c);
+
+ /* run-mode pull settings will conflict with MFPR bits of
+ * low power mode state, calculate mfpr_run and mfpr_lpm
+ * individually if pull != MFP_PULL_NONE
+ */
+ tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
+
+ if (likely(pull == MFP_PULL_NONE)) {
+ p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+ p->mfpr_lpm = p->mfpr_run;
+ } else {
+ p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+ p->mfpr_run = tmp | mfpr_pull[pull];
+ }
+
+ p->config = c; __mfp_config_run(p);
}
mfpr_sync();
@@ -96,117 +165,6 @@
spin_unlock_irqrestore(&mfp_spin_lock, flags);
}
-void pxa3xx_mfp_set_afds(int mfp, int af, int ds)
-{
- uint32_t mfpr_off, mfpr_val;
- unsigned long flags;
-
- BUG_ON(mfp >= MFP_PIN_MAX);
-
- spin_lock_irqsave(&mfp_spin_lock, flags);
- mfpr_off = mfp_table[mfp].mfpr_off;
-
- mfpr_val = mfpr_readl(mfpr_off);
- mfpr_val &= ~(MFPR_AF_MASK | MFPR_DRV_MASK);
- mfpr_val |= (((af & 0x7) << MFPR_ALT_OFFSET) |
- ((ds & 0x7) << MFPR_DRV_OFFSET));
-
- mfpr_writel(mfpr_off, mfpr_val);
- mfpr_sync();
-
- spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void pxa3xx_mfp_set_rdh(int mfp, int rdh)
-{
- uint32_t mfpr_off, mfpr_val;
- unsigned long flags;
-
- BUG_ON(mfp >= MFP_PIN_MAX);
-
- spin_lock_irqsave(&mfp_spin_lock, flags);
-
- mfpr_off = mfp_table[mfp].mfpr_off;
-
- mfpr_val = mfpr_readl(mfpr_off);
- mfpr_val &= ~MFPR_RDH_MASK;
-
- if (likely(rdh))
- mfpr_val |= (1u << MFPR_SS_OFFSET);
-
- mfpr_writel(mfpr_off, mfpr_val);
- mfpr_sync();
-
- spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void pxa3xx_mfp_set_lpm(int mfp, int lpm)
-{
- uint32_t mfpr_off, mfpr_val;
- unsigned long flags;
-
- BUG_ON(mfp >= MFP_PIN_MAX);
-
- spin_lock_irqsave(&mfp_spin_lock, flags);
-
- mfpr_off = mfp_table[mfp].mfpr_off;
- mfpr_val = mfpr_readl(mfpr_off);
- mfpr_val &= ~MFPR_LPM_MASK;
-
- if (lpm & 0x1) mfpr_val |= 1u << MFPR_SON_OFFSET;
- if (lpm & 0x2) mfpr_val |= 1u << MFPR_SD_OFFSET;
- if (lpm & 0x4) mfpr_val |= 1u << MFPR_PU_OFFSET;
- if (lpm & 0x8) mfpr_val |= 1u << MFPR_PD_OFFSET;
- if (lpm &0x10) mfpr_val |= 1u << MFPR_PS_OFFSET;
-
- mfpr_writel(mfpr_off, mfpr_val);
- mfpr_sync();
-
- spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void pxa3xx_mfp_set_pull(int mfp, int pull)
-{
- uint32_t mfpr_off, mfpr_val;
- unsigned long flags;
-
- BUG_ON(mfp >= MFP_PIN_MAX);
-
- spin_lock_irqsave(&mfp_spin_lock, flags);
-
- mfpr_off = mfp_table[mfp].mfpr_off;
- mfpr_val = mfpr_readl(mfpr_off);
- mfpr_val &= ~MFPR_PULL_MASK;
- mfpr_val |= ((pull & 0x7u) << MFPR_PD_OFFSET);
-
- mfpr_writel(mfpr_off, mfpr_val);
- mfpr_sync();
-
- spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void pxa3xx_mfp_set_edge(int mfp, int edge)
-{
- uint32_t mfpr_off, mfpr_val;
- unsigned long flags;
-
- BUG_ON(mfp >= MFP_PIN_MAX);
-
- spin_lock_irqsave(&mfp_spin_lock, flags);
-
- mfpr_off = mfp_table[mfp].mfpr_off;
- mfpr_val = mfpr_readl(mfpr_off);
-
- mfpr_val &= ~MFPR_EDGE_MASK;
- mfpr_val |= (edge & 0x3u) << MFPR_ERE_OFFSET;
- mfpr_val |= (!edge & 0x1) << MFPR_EC_OFFSET;
-
- mfpr_writel(mfpr_off, mfpr_val);
- mfpr_sync();
-
- spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map)
{
struct pxa3xx_mfp_addr_map *p;
@@ -221,7 +179,8 @@
do {
mfp_table[i].mfpr_off = offset;
- mfp_table[i].mfpr_val = 0;
+ mfp_table[i].mfpr_run = 0;
+ mfp_table[i].mfpr_lpm = 0;
offset += 4; i++;
} while ((i <= p->end) && (p->end != -1));
}
@@ -231,5 +190,57 @@
void __init pxa3xx_init_mfp(void)
{
- memset(mfp_table, 0, sizeof(mfp_table));
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
+ mfp_table[i].config = -1;
}
+
+#ifdef CONFIG_PM
+/*
+ * Configure the MFPs appropriately for suspend/resume.
+ * FIXME: this should probably depend on which system state we're
+ * entering - for instance, we might not want to place MFP pins in
+ * a pull-down mode if they're an active low chip select, and we're
+ * just entering standby.
+ */
+static int pxa3xx_mfp_suspend(struct sys_device *d, pm_message_t state)
+{
+ int pin;
+
+ for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) {
+ struct pxa3xx_mfp_pin *p = &mfp_table[pin];
+ __mfp_config_lpm(p);
+ }
+ return 0;
+}
+
+static int pxa3xx_mfp_resume(struct sys_device *d)
+{
+ int pin;
+
+ for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) {
+ struct pxa3xx_mfp_pin *p = &mfp_table[pin];
+ __mfp_config_run(p);
+ }
+ return 0;
+}
+
+static struct sysdev_class mfp_sysclass = {
+ set_kset_name("mfp"),
+ .suspend = pxa3xx_mfp_suspend,
+ .resume = pxa3xx_mfp_resume,
+};
+
+static struct sys_device mfp_device = {
+ .id = 0,
+ .cls = &mfp_sysclass,
+};
+
+static int __init mfp_init_devicefs(void)
+{
+ sysdev_class_register(&mfp_sysclass);
+ return sysdev_register(&mfp_device);
+}
+device_initcall(mfp_init_devicefs);
+#endif
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
new file mode 100644
index 0000000..540c3bb
--- /dev/null
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -0,0 +1,216 @@
+/*
+ * linux/arch/arm/mach-pxa/pcm027.c
+ * Support for the Phytec phyCORE-PXA270 CPU card (aka PCM-027).
+ *
+ * Refer
+ * http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-XScale-PXA270.html
+ * for additional hardware info
+ *
+ * Author: Juergen Kilb
+ * Created: April 05, 2005
+ * Copyright: Phytec Messtechnik GmbH
+ * e-Mail: armlinux@phytec.de
+ *
+ * based on Intel Mainstone Board
+ *
+ * Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx_spi.h>
+#include <asm/arch/pcm027.h>
+#include "generic.h"
+
+/*
+ * ABSTRACT:
+ *
+ * The PXA270 processor comes with a bunch of hardware on its silicon.
+ * Not all of this hardware can be used at the same time and not all
+ * is routed to module's connectors. Also it depends on the baseboard, what
+ * kind of hardware can be used in which way.
+ * -> So this file supports the main devices on the CPU card only!
+ * Refer pcm990-baseboard.c how to extend this features to get a full
+ * blown system with many common interfaces.
+ *
+ * The PCM-027 supports the following interfaces through its connectors and
+ * will be used in pcm990-baseboard.c:
+ *
+ * - LCD support
+ * - MMC support
+ * - IDE/CF card
+ * - FFUART
+ * - BTUART
+ * - IRUART
+ * - AC97
+ * - SSP
+ * - SSP3
+ *
+ * Claimed GPIOs:
+ * GPIO0 -> IRQ input from RTC
+ * GPIO2 -> SYS_ENA*)
+ * GPIO3 -> PWR_SCL
+ * GPIO4 -> PWR_SDA
+ * GPIO5 -> PowerCap0*)
+ * GPIO6 -> PowerCap1*)
+ * GPIO7 -> PowerCap2*)
+ * GPIO8 -> PowerCap3*)
+ * GPIO15 -> /CS1
+ * GPIO20 -> /CS2
+ * GPIO21 -> /CS3
+ * GPIO33 -> /CS5 network controller select
+ * GPIO52 -> IRQ from network controller
+ * GPIO78 -> /CS2
+ * GPIO80 -> /CS4
+ * GPIO90 -> LED0
+ * GPIO91 -> LED1
+ * GPIO114 -> IRQ from CAN controller
+ * GPIO117 -> SCL
+ * GPIO118 -> SDA
+ *
+ * *) CPU internal use only
+ */
+
+/*
+ * SMC91x network controller specific stuff
+ */
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = PCM027_ETH_PHYS + 0x300,
+ .end = PCM027_ETH_PHYS + PCM027_ETH_SIZE,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PCM027_ETH_IRQ,
+ .end = PCM027_ETH_IRQ,
+ /* note: smc91x's driver doesn't use the trigger bits yet */
+ .flags = IORESOURCE_IRQ | PCM027_ETH_IRQ_EDGE,
+ }
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static struct physmap_flash_data pcm027_flash_data = {
+ .width = 4,
+};
+
+static struct resource pcm027_flash_resource = {
+ .start = PCM027_FLASH_PHYS,
+ .end = PCM027_FLASH_PHYS + PCM027_FLASH_SIZE - 1 ,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm027_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &pcm027_flash_data,
+ },
+ .resource = &pcm027_flash_resource,
+ .num_resources = 1,
+};
+
+#ifdef CONFIG_LEDS_GPIO
+
+static struct gpio_led pcm027_led[] = {
+ {
+ .name = "led0:red", /* FIXME */
+ .gpio = PCM027_LED_CPU
+ },
+ {
+ .name = "led1:green", /* FIXME */
+ .gpio = PCM027_LED_HEARD_BEAT
+ },
+};
+
+static struct gpio_led_platform_data pcm027_led_data = {
+ .num_leds = ARRAY_SIZE(pcm027_led),
+ .leds = pcm027_led
+};
+
+static struct platform_device pcm027_led_dev = {
+ .name = "leds-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &pcm027_led_data,
+ },
+};
+
+#endif /* CONFIG_LEDS_GPIO */
+
+/*
+ * declare the available device resources on this board
+ */
+static struct platform_device *devices[] __initdata = {
+ &smc91x_device,
+ &pcm027_flash,
+#ifdef CONFIG_LEDS_GPIO
+ &pcm027_led_dev
+#endif
+};
+
+/*
+ * pcm027_init - breath some life into the board
+ */
+static void __init pcm027_init(void)
+{
+ /* system bus arbiter setting
+ * - Core_Park
+ * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+ */
+ ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ /* LEDs (on demand only) */
+#ifdef CONFIG_LEDS_GPIO
+ pxa_gpio_mode(PCM027_LED_CPU | GPIO_OUT);
+ pxa_gpio_mode(PCM027_LED_HEARD_BEAT | GPIO_OUT);
+#endif /* CONFIG_LEDS_GPIO */
+
+ /* at last call the baseboard to initialize itself */
+#ifdef CONFIG_MACH_PCM990_BASEBOARD
+ pcm990_baseboard_init();
+#endif
+}
+
+static void __init pcm027_map_io(void)
+{
+ pxa_map_io();
+
+ /* initialize sleep mode regs (wake-up sources, etc) */
+ PGSR0 = 0x01308000;
+ PGSR1 = 0x00CF0002;
+ PGSR2 = 0x0E294000;
+ PGSR3 = 0x0000C000;
+ PWER = 0x40000000 | PWER_GPIO0 | PWER_GPIO1;
+ PRER = 0x00000000;
+ PFER = 0x00000003;
+}
+
+MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
+ /* Maintainer: Pengutronix */
+ .boot_params = 0xa0000100,
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pcm027_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = pcm027_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
new file mode 100644
index 0000000..3dda16a
--- /dev/null
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -0,0 +1,330 @@
+/*
+ * arch/arm/mach-pxa/pcm990-baseboard.c
+ * Support for the Phytec phyCORE-PXA270 Development Platform (PCM-990).
+ *
+ * Refer
+ * http://www.phytec.com/products/rdk/ARM-XScale/phyCORE-XScale-PXA270.html
+ * for additional hardware info
+ *
+ * Author: Juergen Kilb
+ * Created: April 05, 2005
+ * Copyright: Phytec Messtechnik GmbH
+ * e-Mail: armlinux@phytec.de
+ *
+ * based on Intel Mainstone Board
+ *
+ * Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/ide.h>
+#include <asm/mach/map.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/ohci.h>
+#include <asm/arch/pcm990_baseboard.h>
+
+/*
+ * The PCM-990 development baseboard uses PCM-027's hardeware in the
+ * following way:
+ *
+ * - LCD support is in use
+ * - GPIO16 is output for back light on/off with PWM
+ * - GPIO58 ... GPIO73 are outputs for display data
+ * - GPIO74 is output output for LCDFCLK
+ * - GPIO75 is output for LCDLCLK
+ * - GPIO76 is output for LCDPCLK
+ * - GPIO77 is output for LCDBIAS
+ * - MMC support is in use
+ * - GPIO32 is output for MMCCLK
+ * - GPIO92 is MMDAT0
+ * - GPIO109 is MMDAT1
+ * - GPIO110 is MMCS0
+ * - GPIO111 is MMCS1
+ * - GPIO112 is MMCMD
+ * - IDE/CF card is in use
+ * - GPIO48 is output /POE
+ * - GPIO49 is output /PWE
+ * - GPIO50 is output /PIOR
+ * - GPIO51 is output /PIOW
+ * - GPIO54 is output /PCE2
+ * - GPIO55 is output /PREG
+ * - GPIO56 is input /PWAIT
+ * - GPIO57 is output /PIOS16
+ * - GPIO79 is output PSKTSEL
+ * - GPIO85 is output /PCE1
+ * - FFUART is in use
+ * - GPIO34 is input FFRXD
+ * - GPIO35 is input FFCTS
+ * - GPIO36 is input FFDCD
+ * - GPIO37 is input FFDSR
+ * - GPIO38 is input FFRI
+ * - GPIO39 is output FFTXD
+ * - GPIO40 is output FFDTR
+ * - GPIO41 is output FFRTS
+ * - BTUART is in use
+ * - GPIO42 is input BTRXD
+ * - GPIO43 is output BTTXD
+ * - GPIO44 is input BTCTS
+ * - GPIO45 is output BTRTS
+ * - IRUART is in use
+ * - GPIO46 is input STDRXD
+ * - GPIO47 is output STDTXD
+ * - AC97 is in use*)
+ * - GPIO28 is input AC97CLK
+ * - GPIO29 is input AC97DatIn
+ * - GPIO30 is output AC97DatO
+ * - GPIO31 is output AC97SYNC
+ * - GPIO113 is output AC97_RESET
+ * - SSP is in use
+ * - GPIO23 is output SSPSCLK
+ * - GPIO24 is output chip select to Max7301
+ * - GPIO25 is output SSPTXD
+ * - GPIO26 is input SSPRXD
+ * - GPIO27 is input for Max7301 IRQ
+ * - GPIO53 is input SSPSYSCLK
+ * - SSP3 is in use
+ * - GPIO81 is output SSPTXD3
+ * - GPIO82 is input SSPRXD3
+ * - GPIO83 is output SSPSFRM
+ * - GPIO84 is output SSPCLK3
+ *
+ * Otherwise claimed GPIOs:
+ * GPIO1 -> IRQ from user switch
+ * GPIO9 -> IRQ from power management
+ * GPIO10 -> IRQ from WML9712 AC97 controller
+ * GPIO11 -> IRQ from IDE controller
+ * GPIO12 -> IRQ from CF controller
+ * GPIO13 -> IRQ from CF controller
+ * GPIO14 -> GPIO free
+ * GPIO15 -> /CS1 selects baseboard's Control CPLD (U7, 16 bit wide data path)
+ * GPIO19 -> GPIO free
+ * GPIO20 -> /SDCS2
+ * GPIO21 -> /CS3 PC card socket select
+ * GPIO33 -> /CS5 network controller select
+ * GPIO78 -> /CS2 (16 bit wide data path)
+ * GPIO80 -> /CS4 (16 bit wide data path)
+ * GPIO86 -> GPIO free
+ * GPIO87 -> GPIO free
+ * GPIO90 -> LED0 on CPU module
+ * GPIO91 -> LED1 on CPI module
+ * GPIO117 -> SCL
+ * GPIO118 -> SDA
+ */
+
+static unsigned long pcm990_irq_enabled;
+
+static void pcm990_mask_ack_irq(unsigned int irq)
+{
+ int pcm990_irq = (irq - PCM027_IRQ(0));
+ PCM990_INTMSKENA = (pcm990_irq_enabled &= ~(1 << pcm990_irq));
+}
+
+static void pcm990_unmask_irq(unsigned int irq)
+{
+ int pcm990_irq = (irq - PCM027_IRQ(0));
+ /* the irq can be acknowledged only if deasserted, so it's done here */
+ PCM990_INTSETCLR |= 1 << pcm990_irq;
+ PCM990_INTMSKENA = (pcm990_irq_enabled |= (1 << pcm990_irq));
+}
+
+static struct irq_chip pcm990_irq_chip = {
+ .mask_ack = pcm990_mask_ack_irq,
+ .unmask = pcm990_unmask_irq,
+};
+
+static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned long pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
+
+ do {
+ GEDR(PCM990_CTRL_INT_IRQ_GPIO) =
+ GPIO_bit(PCM990_CTRL_INT_IRQ_GPIO);
+ if (likely(pending)) {
+ irq = PCM027_IRQ(0) + __ffs(pending);
+ desc = irq_desc + irq;
+ desc_handle_irq(irq, desc);
+ }
+ pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
+ } while (pending);
+}
+
+static void __init pcm990_init_irq(void)
+{
+ int irq;
+
+ /* setup extra PCM990 irqs */
+ for (irq = PCM027_IRQ(0); irq <= PCM027_IRQ(3); irq++) {
+ set_irq_chip(irq, &pcm990_irq_chip);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+
+ PCM990_INTMSKENA = 0x00; /* disable all Interrupts */
+ PCM990_INTSETCLR = 0xFF;
+
+ set_irq_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler);
+ set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE);
+}
+
+static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
+ void *data)
+{
+ int err;
+
+ /*
+ * enable GPIO for PXA27x MMC controller
+ */
+ pxa_gpio_mode(GPIO32_MMCCLK_MD);
+ pxa_gpio_mode(GPIO112_MMCCMD_MD);
+ pxa_gpio_mode(GPIO92_MMCDAT0_MD);
+ pxa_gpio_mode(GPIO109_MMCDAT1_MD);
+ pxa_gpio_mode(GPIO110_MMCDAT2_MD);
+ pxa_gpio_mode(GPIO111_MMCDAT3_MD);
+
+ err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED,
+ "MMC card detect", data);
+ if (err)
+ printk(KERN_ERR "pcm990_mci_init: MMC/SD: can't request MMC "
+ "card detect IRQ\n");
+
+ return err;
+}
+
+static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+
+ if ((1 << vdd) & p_d->ocr_mask)
+ __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
+ PCM990_CTRL_MMC2PWR;
+ else
+ __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
+ ~PCM990_CTRL_MMC2PWR;
+}
+
+static void pcm990_mci_exit(struct device *dev, void *data)
+{
+ free_irq(PCM027_MMCDET_IRQ, data);
+}
+
+#define MSECS_PER_JIFFY (1000/HZ)
+
+static struct pxamci_platform_data pcm990_mci_platform_data = {
+ .detect_delay = 250 / MSECS_PER_JIFFY,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .init = pcm990_mci_init,
+ .setpower = pcm990_mci_setpower,
+ .exit = pcm990_mci_exit,
+};
+
+/*
+ * init OHCI hardware to work with
+ *
+ * Note: Only USB port 1 (host only) is connected
+ *
+ * GPIO88 (USBHPWR#1): overcurrent in, overcurrent when low
+ * GPIO89 (USBHPEN#1): power-on out, on when low
+ */
+static int pcm990_ohci_init(struct device *dev)
+{
+ pxa_gpio_mode(PCM990_USB_OVERCURRENT);
+ pxa_gpio_mode(PCM990_USB_PWR_EN);
+ /*
+ * disable USB port 2 and 3
+ * power sense is active low
+ */
+ UHCHR = ((UHCHR) | UHCHR_PCPL | UHCHR_PSPL | UHCHR_SSEP2 |
+ UHCHR_SSEP3) & ~(UHCHR_SSEP1 | UHCHR_SSE);
+ /*
+ * wait 10ms after Power on
+ * overcurrent per port
+ * power switch per port
+ */
+ UHCRHDA = (5<<24) | (1<<11) | (1<<8); /* FIXME: Required? */
+
+ return 0;
+}
+
+static struct pxaohci_platform_data pcm990_ohci_platform_data = {
+ .port_mode = PMM_PERPORT_MODE,
+ .init = pcm990_ohci_init,
+ .exit = NULL,
+};
+
+/*
+ * AC97 support
+ * Note: The connected AC97 mixer also reports interrupts at PCM990_AC97_IRQ
+ */
+static struct resource pxa27x_ac97_resources[] = {
+ [0] = {
+ .start = 0x40500000,
+ .end = 0x40500000 + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_AC97,
+ .end = IRQ_AC97,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 pxa_ac97_dmamask = 0xffffffffUL;
+
+static struct platform_device pxa27x_device_ac97 = {
+ .name = "pxa2xx-ac97",
+ .id = -1,
+ .dev = {
+ .dma_mask = &pxa_ac97_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxa27x_ac97_resources),
+ .resource = pxa27x_ac97_resources,
+};
+
+/*
+ * enable generic access to the base board control CPLDs U6 and U7
+ */
+static struct map_desc pcm990_io_desc[] __initdata = {
+ {
+ .virtual = PCM990_CTRL_BASE,
+ .pfn = __phys_to_pfn(PCM990_CTRL_PHYS),
+ .length = PCM990_CTRL_SIZE,
+ .type = MT_DEVICE /* CPLD */
+ }, {
+ .virtual = PCM990_CF_PLD_BASE,
+ .pfn = __phys_to_pfn(PCM990_CF_PLD_PHYS),
+ .length = PCM990_CF_PLD_SIZE,
+ .type = MT_DEVICE /* CPLD */
+ }
+};
+
+/*
+ * system init for baseboard usage. Will be called by pcm027 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init pcm990_baseboard_init(void)
+{
+ /* register CPLD access */
+ iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc));
+
+ /* register CPLD's IRQ controller */
+ pcm990_init_irq();
+
+ platform_device_register(&pxa27x_device_ac97);
+
+ /* MMC */
+ pxa_set_mci_info(&pcm990_mci_platform_data);
+
+ /* USB host */
+ pxa_set_ohci_info(&pcm990_ohci_platform_data);
+
+ printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n");
+}
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index a941c71..039194c 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -38,34 +38,37 @@
iwmmxt_task_disable(NULL);
#endif
- pxa_cpu_pm_fns->save(sleep_save);
+ /* skip registers saving for standby */
+ if (state != PM_SUSPEND_STANDBY) {
+ pxa_cpu_pm_fns->save(sleep_save);
+ /* before sleeping, calculate and save a checksum */
+ for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
+ sleep_save_checksum += sleep_save[i];
+ }
/* Clear sleep reset status */
RCSR = RCSR_SMR;
- /* before sleeping, calculate and save a checksum */
- for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
- sleep_save_checksum += sleep_save[i];
-
/* *** go zzz *** */
pxa_cpu_pm_fns->enter(state);
cpu_init();
- /* after sleeping, validate the checksum */
- for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
- checksum += sleep_save[i];
+ if (state != PM_SUSPEND_STANDBY) {
+ /* after sleeping, validate the checksum */
+ for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++)
+ checksum += sleep_save[i];
- /* if invalid, display message and wait for a hardware reset */
- if (checksum != sleep_save_checksum) {
+ /* if invalid, display message and wait for a hardware reset */
+ if (checksum != sleep_save_checksum) {
#ifdef CONFIG_ARCH_LUBBOCK
- LUB_HEXLED = 0xbadbadc5;
+ LUB_HEXLED = 0xbadbadc5;
#endif
- while (1)
- pxa_cpu_pm_fns->enter(state);
+ while (1)
+ pxa_cpu_pm_fns->enter(state);
+ }
+ pxa_cpu_pm_fns->restore(sleep_save);
}
- pxa_cpu_pm_fns->restore(sleep_save);
-
pr_debug("*** made it back from resume\n");
return 0;
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 655668d..dd54496 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -215,12 +215,10 @@
err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
- if (err) {
+ if (err)
printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
- return -1;
- }
- return 0;
+ return err;
}
static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 9732d5d..ddd05bf 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -111,21 +111,27 @@
* 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
* 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly)
*/
+static struct clk pxa25x_hwuart_clk =
+ INIT_CKEN("UARTCLK", HWUART, 14745600, 1, &pxa_device_hwuart.dev)
+;
+
static struct clk pxa25x_clks[] = {
INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev),
INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev),
INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
- INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev),
INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
+
+ INIT_CKEN("SSPCLK", SSP, 3686400, 0, &pxa25x_device_ssp.dev),
+ INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev),
+ INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev),
+
/*
INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL),
INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL),
- INIT_CKEN("SSPCLK", SSP, 3686400, 0, NULL),
INIT_CKEN("I2SCLK", I2S, 14745600, 0, NULL),
- INIT_CKEN("NSSPCLK", NSSP, 3686400, 0, NULL),
*/
INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
};
@@ -213,8 +219,6 @@
static void pxa25x_cpu_pm_enter(suspend_state_t state)
{
- CKEN = 0;
-
switch (state) {
case PM_SUSPEND_MEM:
/* set resume return address */
@@ -236,6 +240,8 @@
{
pxa_cpu_pm_fns = &pxa25x_cpu_pm_fns;
}
+#else
+static inline void pxa25x_init_pm(void) {}
#endif
/* PXA25x: supports wakeup from GPIO0..GPIO15 and RTC alarm
@@ -287,30 +293,33 @@
}
static struct platform_device *pxa25x_devices[] __initdata = {
- &pxa_device_mci,
&pxa_device_udc,
- &pxa_device_fb,
&pxa_device_ffuart,
&pxa_device_btuart,
&pxa_device_stuart,
- &pxa_device_i2c,
&pxa_device_i2s,
- &pxa_device_ficp,
&pxa_device_rtc,
+ &pxa25x_device_ssp,
+ &pxa25x_device_nssp,
+ &pxa25x_device_assp,
};
static int __init pxa25x_init(void)
{
int ret = 0;
+ /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
+ if (cpu_is_pxa25x())
+ clks_register(&pxa25x_hwuart_clk, 1);
+
if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks));
if ((ret = pxa_init_dma(16)))
return ret;
-#ifdef CONFIG_PM
+
pxa25x_init_pm();
-#endif
+
ret = platform_add_devices(pxa25x_devices,
ARRAY_SIZE(pxa25x_devices));
}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 57efebd..96cf274 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -21,6 +21,7 @@
#include <asm/irq.h>
#include <asm/arch/irqs.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/ohci.h>
#include <asm/arch/pm.h>
#include <asm/arch/dma.h>
@@ -151,11 +152,12 @@
INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev),
INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL),
+ INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
+ INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
+ INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
+
/*
INIT_CKEN("PWMCLK", PWM0, 13000000, 0, NULL),
- INIT_CKEN("SSPCLK", SSP1, 13000000, 0, NULL),
- INIT_CKEN("SSPCLK", SSP2, 13000000, 0, NULL),
- INIT_CKEN("SSPCLK", SSP3, 13000000, 0, NULL),
INIT_CKEN("MSLCLK", MSL, 48000000, 0, NULL),
INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL),
INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL),
@@ -264,12 +266,6 @@
{
extern void pxa_cpu_standby(void);
- if (state == PM_SUSPEND_STANDBY)
- CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER) |
- (1 << CKEN_LCD) | (1 << CKEN_PWM0);
- else
- CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER);
-
/* ensure voltage-change sequencer not initiated, which hangs */
PCFR &= ~PCFR_FVC;
@@ -305,6 +301,8 @@
{
pxa_cpu_pm_fns = &pxa27x_cpu_pm_fns;
}
+#else
+static inline void pxa27x_init_pm(void) {}
#endif
/* PXA27x: Various gpios can issue wakeup events. This logic only
@@ -374,37 +372,6 @@
* device registration specific to PXA27x.
*/
-static u64 pxa27x_dmamask = 0xffffffffUL;
-
-static struct resource pxa27x_ohci_resources[] = {
- [0] = {
- .start = 0x4C000000,
- .end = 0x4C00ff6f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBH1,
- .end = IRQ_USBH1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device pxa27x_device_ohci = {
- .name = "pxa27x-ohci",
- .id = -1,
- .dev = {
- .dma_mask = &pxa27x_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(pxa27x_ohci_resources),
- .resource = pxa27x_ohci_resources,
-};
-
-void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
-{
- pxa27x_device_ohci.dev.platform_data = info;
-}
-
static struct resource i2c_power_resources[] = {
{
.start = 0x40f00180,
@@ -430,18 +397,16 @@
}
static struct platform_device *devices[] __initdata = {
- &pxa_device_mci,
&pxa_device_udc,
- &pxa_device_fb,
&pxa_device_ffuart,
&pxa_device_btuart,
&pxa_device_stuart,
- &pxa_device_i2c,
&pxa_device_i2s,
- &pxa_device_ficp,
&pxa_device_rtc,
&pxa27x_device_i2c_power,
- &pxa27x_device_ohci,
+ &pxa27x_device_ssp1,
+ &pxa27x_device_ssp2,
+ &pxa27x_device_ssp3,
};
static int __init pxa27x_init(void)
@@ -452,9 +417,9 @@
if ((ret = pxa_init_dma(32)))
return ret;
-#ifdef CONFIG_PM
+
pxa27x_init_pm();
-#endif
+
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
}
return ret;
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 61d9c9d..5cbf057 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -19,6 +19,7 @@
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <asm/hardware.h>
#include <asm/arch/pxa3xx-regs.h>
@@ -86,7 +87,7 @@
HSS / 1000000, (HSS % 1000000) / 10000);
}
- return CLK;
+ return CLK / 1000;
}
/*
@@ -189,8 +190,237 @@
PXA3xx_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev),
PXA3xx_CKEN("UDCCLK", UDC, 48000000, 5, &pxa_device_udc.dev),
+ PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev),
+
+ PXA3xx_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
+ PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
+ PXA3xx_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
+ PXA3xx_CKEN("SSPCLK", SSP4, 13000000, 0, &pxa3xx_device_ssp4.dev),
+
+ PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev),
+ PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev),
+ PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
};
+#ifdef CONFIG_PM
+#define SLEEP_SAVE_SIZE 4
+
+#define ISRAM_START 0x5c000000
+#define ISRAM_SIZE SZ_256K
+
+static void __iomem *sram;
+static unsigned long wakeup_src;
+
+static void pxa3xx_cpu_pm_save(unsigned long *sleep_save)
+{
+ pr_debug("PM: CKENA=%08x CKENB=%08x\n", CKENA, CKENB);
+
+ if (CKENA & (1 << CKEN_USBH)) {
+ printk(KERN_ERR "PM: USB host clock not stopped?\n");
+ CKENA &= ~(1 << CKEN_USBH);
+ }
+// CKENA |= 1 << (CKEN_ISC & 31);
+
+ /*
+ * Low power modes require the HSIO2 clock to be enabled.
+ */
+ CKENB |= 1 << (CKEN_HSIO2 & 31);
+}
+
+static void pxa3xx_cpu_pm_restore(unsigned long *sleep_save)
+{
+ CKENB &= ~(1 << (CKEN_HSIO2 & 31));
+}
+
+/*
+ * Enter a standby mode (S0D1C2 or S0D2C2). Upon wakeup, the dynamic
+ * memory controller has to be reinitialised, so we place some code
+ * in the SRAM to perform this function.
+ *
+ * We disable FIQs across the standby - otherwise, we might receive a
+ * FIQ while the SDRAM is unavailable.
+ */
+static void pxa3xx_cpu_standby(unsigned int pwrmode)
+{
+ extern const char pm_enter_standby_start[], pm_enter_standby_end[];
+ void (*fn)(unsigned int) = (void __force *)(sram + 0x8000);
+
+ memcpy_toio(sram + 0x8000, pm_enter_standby_start,
+ pm_enter_standby_end - pm_enter_standby_start);
+
+ AD2D0SR = ~0;
+ AD2D1SR = ~0;
+ AD2D0ER = wakeup_src;
+ AD2D1ER = 0;
+ ASCR = ASCR;
+ ARSR = ARSR;
+
+ local_fiq_disable();
+ fn(pwrmode);
+ local_fiq_enable();
+
+ AD2D0ER = 0;
+ AD2D1ER = 0;
+
+ printk("PM: AD2D0SR=%08x ASCR=%08x\n", AD2D0SR, ASCR);
+}
+
+static void pxa3xx_cpu_pm_enter(suspend_state_t state)
+{
+ /*
+ * Don't sleep if no wakeup sources are defined
+ */
+ if (wakeup_src == 0)
+ return;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ pxa3xx_cpu_standby(PXA3xx_PM_S0D2C2);
+ break;
+
+ case PM_SUSPEND_MEM:
+ break;
+ }
+}
+
+static int pxa3xx_cpu_pm_valid(suspend_state_t state)
+{
+ return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
+}
+
+static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
+ .save_size = SLEEP_SAVE_SIZE,
+ .save = pxa3xx_cpu_pm_save,
+ .restore = pxa3xx_cpu_pm_restore,
+ .valid = pxa3xx_cpu_pm_valid,
+ .enter = pxa3xx_cpu_pm_enter,
+};
+
+static void __init pxa3xx_init_pm(void)
+{
+ sram = ioremap(ISRAM_START, ISRAM_SIZE);
+ if (!sram) {
+ printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n");
+ return;
+ }
+
+ /*
+ * Since we copy wakeup code into the SRAM, we need to ensure
+ * that it is preserved over the low power modes. Note: bit 8
+ * is undocumented in the developer manual, but must be set.
+ */
+ AD1R |= ADXR_L2 | ADXR_R0;
+ AD2R |= ADXR_L2 | ADXR_R0;
+ AD3R |= ADXR_L2 | ADXR_R0;
+
+ /*
+ * Clear the resume enable registers.
+ */
+ AD1D0ER = 0;
+ AD2D0ER = 0;
+ AD2D1ER = 0;
+ AD3ER = 0;
+
+ pxa_cpu_pm_fns = &pxa3xx_cpu_pm_fns;
+}
+
+static int pxa3xx_set_wake(unsigned int irq, unsigned int on)
+{
+ unsigned long flags, mask = 0;
+
+ switch (irq) {
+ case IRQ_SSP3:
+ mask = ADXER_MFP_WSSP3;
+ break;
+ case IRQ_MSL:
+ mask = ADXER_WMSL0;
+ break;
+ case IRQ_USBH2:
+ case IRQ_USBH1:
+ mask = ADXER_WUSBH;
+ break;
+ case IRQ_KEYPAD:
+ mask = ADXER_WKP;
+ break;
+ case IRQ_AC97:
+ mask = ADXER_MFP_WAC97;
+ break;
+ case IRQ_USIM:
+ mask = ADXER_WUSIM0;
+ break;
+ case IRQ_SSP2:
+ mask = ADXER_MFP_WSSP2;
+ break;
+ case IRQ_I2C:
+ mask = ADXER_MFP_WI2C;
+ break;
+ case IRQ_STUART:
+ mask = ADXER_MFP_WUART3;
+ break;
+ case IRQ_BTUART:
+ mask = ADXER_MFP_WUART2;
+ break;
+ case IRQ_FFUART:
+ mask = ADXER_MFP_WUART1;
+ break;
+ case IRQ_MMC:
+ mask = ADXER_MFP_WMMC1;
+ break;
+ case IRQ_SSP:
+ mask = ADXER_MFP_WSSP1;
+ break;
+ case IRQ_RTCAlrm:
+ mask = ADXER_WRTC;
+ break;
+ case IRQ_SSP4:
+ mask = ADXER_MFP_WSSP4;
+ break;
+ case IRQ_TSI:
+ mask = ADXER_WTSI;
+ break;
+ case IRQ_USIM2:
+ mask = ADXER_WUSIM1;
+ break;
+ case IRQ_MMC2:
+ mask = ADXER_MFP_WMMC2;
+ break;
+ case IRQ_NAND:
+ mask = ADXER_MFP_WFLASH;
+ break;
+ case IRQ_USB2:
+ mask = ADXER_WUSB2;
+ break;
+ case IRQ_WAKEUP0:
+ mask = ADXER_WEXTWAKE0;
+ break;
+ case IRQ_WAKEUP1:
+ mask = ADXER_WEXTWAKE1;
+ break;
+ case IRQ_MMC3:
+ mask = ADXER_MFP_GEN12;
+ break;
+ }
+
+ local_irq_save(flags);
+ if (on)
+ wakeup_src |= mask;
+ else
+ wakeup_src &= ~mask;
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static void pxa3xx_init_irq_pm(void)
+{
+ pxa_init_irq_set_wake(pxa3xx_set_wake);
+}
+
+#else
+static inline void pxa3xx_init_pm(void) {}
+static inline void pxa3xx_init_irq_pm(void) {}
+#endif
+
void __init pxa3xx_init_irq(void)
{
/* enable CP6 access */
@@ -202,6 +432,7 @@
pxa_init_irq_low();
pxa_init_irq_high();
pxa_init_irq_gpio(128);
+ pxa3xx_init_irq_pm();
}
/*
@@ -209,16 +440,16 @@
*/
static struct platform_device *devices[] __initdata = {
- &pxa_device_mci,
&pxa_device_udc,
- &pxa_device_fb,
&pxa_device_ffuart,
&pxa_device_btuart,
&pxa_device_stuart,
- &pxa_device_i2c,
&pxa_device_i2s,
- &pxa_device_ficp,
&pxa_device_rtc,
+ &pxa27x_device_ssp1,
+ &pxa27x_device_ssp2,
+ &pxa27x_device_ssp3,
+ &pxa3xx_device_ssp4,
};
static int __init pxa3xx_init(void)
@@ -231,6 +462,8 @@
if ((ret = pxa_init_dma(32)))
return ret;
+ pxa3xx_init_pm();
+
return platform_add_devices(devices, ARRAY_SIZE(devices));
}
return 0;
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index da4769c..047909a 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -26,28 +26,15 @@
/*
- * SharpSL Backlight
+ * SharpSL/Corgi LCD Driver
*/
-void corgi_bl_set_intensity(int intensity);
-void spitz_bl_set_intensity(int intensity);
-void akita_bl_set_intensity(int intensity);
-
-
-/*
- * SharpSL Touchscreen Driver
- */
-unsigned long corgi_get_hsync_len(void);
-unsigned long spitz_get_hsync_len(void);
-void corgi_put_hsync(void);
-void spitz_put_hsync(void);
-void corgi_wait_hsync(void);
-void spitz_wait_hsync(void);
+void corgi_lcdtg_suspend(void);
+void corgi_lcdtg_hw_init(int mode);
/*
* SharpSL Battery/PM Driver
*/
-
#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x))
/* MAX1111 Channel Definitions */
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index d044772..14bb4a9 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -16,6 +16,7 @@
#include <asm/hardware.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#define MDREFR_KDIV 0x200a4000 // all banks
#define CCCR_SLEEP 0x00000107 // L=7 2N=2 A=0 PPDIS=0 CPDIS=0
@@ -49,6 +50,7 @@
str r0, [r1]
ldr pc, [sp], #4
+#ifdef CONFIG_PXA27x
/*
* pxa27x_cpu_suspend()
*
@@ -104,9 +106,11 @@
@ align execution to a cache line
b pxa_cpu_do_suspend
+#endif
+#ifdef CONFIG_PXA25x
/*
- * pxa27x_cpu_suspend()
+ * pxa25x_cpu_suspend()
*
* Forces CPU into sleep state.
*
@@ -169,6 +173,7 @@
mcr p14, 0, r0, c6, c0, 0
orr r0, r0, #2 @ initiate change bit
b pxa_cpu_do_suspend
+#endif
.ltorg
.align 5
@@ -208,7 +213,7 @@
20: b 20b @ loop waiting for sleep
/*
- * cpu_pxa_resume()
+ * pxa_cpu_resume()
*
* entry point from bootloader into kernel during resume
*
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 2d78199..5078ede 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -271,6 +271,55 @@
/*
* Spitz Touch Screen Device
*/
+
+static unsigned long (*get_hsync_invperiod)(struct device *dev);
+
+static void inline sharpsl_wait_sync(int gpio)
+{
+ while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
+ while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
+}
+
+static struct device *spitz_pxafb_dev;
+
+static int is_pxafb_device(struct device * dev, void * data)
+{
+ struct platform_device *pdev = container_of(dev, struct platform_device, dev);
+
+ return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
+}
+
+static unsigned long spitz_get_hsync_invperiod(void)
+{
+#ifdef CONFIG_FB_PXA
+ if (!spitz_pxafb_dev) {
+ spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
+ if (!spitz_pxafb_dev)
+ return 0;
+ }
+ if (!get_hsync_invperiod)
+ get_hsync_invperiod = symbol_get(pxafb_get_hsync_time);
+ if (!get_hsync_invperiod)
+#endif
+ return 0;
+
+ return get_hsync_invperiod(spitz_pxafb_dev);
+}
+
+static void spitz_put_hsync(void)
+{
+ put_device(spitz_pxafb_dev);
+ if (get_hsync_invperiod)
+ symbol_put(pxafb_get_hsync_time);
+ spitz_pxafb_dev = NULL;
+ get_hsync_invperiod = NULL;
+}
+
+static void spitz_wait_hsync(void)
+{
+ sharpsl_wait_sync(SPITZ_GPIO_HSYNC);
+}
+
static struct resource spitzts_resources[] = {
[0] = {
.start = SPITZ_IRQ_GPIO_TP_INT,
@@ -280,9 +329,9 @@
};
static struct corgits_machinfo spitz_ts_machinfo = {
- .get_hsync_len = spitz_get_hsync_len,
- .put_hsync = spitz_put_hsync,
- .wait_hsync = spitz_wait_hsync,
+ .get_hsync_invperiod = spitz_get_hsync_invperiod,
+ .put_hsync = spitz_put_hsync,
+ .wait_hsync = spitz_wait_hsync,
};
static struct platform_device spitzts_device = {
@@ -325,12 +374,10 @@
err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
- if (err) {
+ if (err)
printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
- return -1;
- }
- return 0;
+ return err;
}
static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
@@ -423,6 +470,14 @@
* Spitz PXA Framebuffer
*/
+static void spitz_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+ if (on)
+ corgi_lcdtg_hw_init(var->xres);
+ else
+ corgi_lcdtg_suspend();
+}
+
static struct pxafb_mode_info spitz_pxafb_modes[] = {
{
.pixclock = 19231,
@@ -520,6 +575,27 @@
set_pxa_fb_info(&spitz_pxafb_info);
}
+#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
+static void spitz_bl_set_intensity(int intensity)
+{
+ if (intensity > 0x10)
+ intensity += 0x10;
+
+ /* Bits 0-4 are accessed via the SSP interface */
+ corgi_ssp_blduty_set(intensity & 0x1f);
+
+ /* Bit 5 is via SCOOP */
+ if (intensity & 0x0020)
+ reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
+ else
+ set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
+
+ if (intensity)
+ set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
+ else
+ reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
+}
+
static void __init spitz_init(void)
{
platform_scoop_config = &spitz_pcmcia_config;
@@ -530,6 +606,7 @@
platform_device_register(&spitzscoop2_device);
}
+#endif
#ifdef CONFIG_MACH_AKITA
/*
@@ -542,6 +619,26 @@
EXPORT_SYMBOL_GPL(akitaioexp_device);
+static void akita_bl_set_intensity(int intensity)
+{
+ if (intensity > 0x10)
+ intensity += 0x10;
+
+ /* Bits 0-4 are accessed via the SSP interface */
+ corgi_ssp_blduty_set(intensity & 0x1f);
+
+ /* Bit 5 is via IO-Expander */
+ if (intensity & 0x0020)
+ akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
+ else
+ akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
+
+ if (intensity)
+ akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
+ else
+ akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
+}
+
static void __init akita_init(void)
{
spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode;
@@ -558,7 +655,6 @@
}
#endif
-
static void __init fixup_spitz(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 422afee..00af7f2 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -32,45 +32,27 @@
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hardware.h>
#include <asm/arch/ssp.h>
#include <asm/arch/pxa-regs.h>
-
-#define PXA_SSP_PORTS 3
+#include <asm/arch/regs-ssp.h>
#define TIMEOUT 100000
-struct ssp_info_ {
- int irq;
- u32 clock;
-};
-
-/*
- * SSP port clock and IRQ settings
- */
-static const struct ssp_info_ ssp_info[PXA_SSP_PORTS] = {
-#if defined (CONFIG_PXA27x)
- {IRQ_SSP, CKEN_SSP1},
- {IRQ_SSP2, CKEN_SSP2},
- {IRQ_SSP3, CKEN_SSP3},
-#else
- {IRQ_SSP, CKEN_SSP},
- {IRQ_NSSP, CKEN_NSSP},
- {IRQ_ASSP, CKEN_ASSP},
-#endif
-};
-
-static DEFINE_MUTEX(mutex);
-static int use_count[PXA_SSP_PORTS] = {0, 0, 0};
-
static irqreturn_t ssp_interrupt(int irq, void *dev_id)
{
- struct ssp_dev *dev = (struct ssp_dev*) dev_id;
- unsigned int status = SSSR_P(dev->port);
+ struct ssp_dev *dev = dev_id;
+ struct ssp_device *ssp = dev->ssp;
+ unsigned int status;
- SSSR_P(dev->port) = status; /* clear status bits */
+ status = __raw_readl(ssp->mmio_base + SSSR);
+ __raw_writel(status, ssp->mmio_base + SSSR);
if (status & SSSR_ROR)
printk(KERN_WARNING "SSP(%d): receiver overrun\n", dev->port);
@@ -99,15 +81,16 @@
*/
int ssp_write_word(struct ssp_dev *dev, u32 data)
{
+ struct ssp_device *ssp = dev->ssp;
int timeout = TIMEOUT;
- while (!(SSSR_P(dev->port) & SSSR_TNF)) {
+ while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_TNF)) {
if (!--timeout)
return -ETIMEDOUT;
cpu_relax();
}
- SSDR_P(dev->port) = data;
+ __raw_writel(data, ssp->mmio_base + SSDR);
return 0;
}
@@ -129,15 +112,16 @@
*/
int ssp_read_word(struct ssp_dev *dev, u32 *data)
{
+ struct ssp_device *ssp = dev->ssp;
int timeout = TIMEOUT;
- while (!(SSSR_P(dev->port) & SSSR_RNE)) {
+ while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE)) {
if (!--timeout)
return -ETIMEDOUT;
cpu_relax();
}
- *data = SSDR_P(dev->port);
+ *data = __raw_readl(ssp->mmio_base + SSDR);
return 0;
}
@@ -151,17 +135,28 @@
*/
int ssp_flush(struct ssp_dev *dev)
{
+ struct ssp_device *ssp = dev->ssp;
int timeout = TIMEOUT * 2;
+ /* ensure TX FIFO is empty instead of not full */
+ if (cpu_is_pxa3xx()) {
+ while (__raw_readl(ssp->mmio_base + SSSR) & 0xf00) {
+ if (!--timeout)
+ return -ETIMEDOUT;
+ cpu_relax();
+ }
+ timeout = TIMEOUT * 2;
+ }
+
do {
- while (SSSR_P(dev->port) & SSSR_RNE) {
+ while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE) {
if (!--timeout)
return -ETIMEDOUT;
- (void) SSDR_P(dev->port);
+ (void)__raw_readl(ssp->mmio_base + SSDR);
}
if (!--timeout)
return -ETIMEDOUT;
- } while (SSSR_P(dev->port) & SSSR_BSY);
+ } while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_BSY);
return 0;
}
@@ -173,7 +168,12 @@
*/
void ssp_enable(struct ssp_dev *dev)
{
- SSCR0_P(dev->port) |= SSCR0_SSE;
+ struct ssp_device *ssp = dev->ssp;
+ uint32_t sscr0;
+
+ sscr0 = __raw_readl(ssp->mmio_base + SSCR0);
+ sscr0 |= SSCR0_SSE;
+ __raw_writel(sscr0, ssp->mmio_base + SSCR0);
}
/**
@@ -183,7 +183,12 @@
*/
void ssp_disable(struct ssp_dev *dev)
{
- SSCR0_P(dev->port) &= ~SSCR0_SSE;
+ struct ssp_device *ssp = dev->ssp;
+ uint32_t sscr0;
+
+ sscr0 = __raw_readl(ssp->mmio_base + SSCR0);
+ sscr0 &= ~SSCR0_SSE;
+ __raw_writel(sscr0, ssp->mmio_base + SSCR0);
}
/**
@@ -192,14 +197,16 @@
*
* Save the configured SSP state for suspend.
*/
-void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp)
+void ssp_save_state(struct ssp_dev *dev, struct ssp_state *state)
{
- ssp->cr0 = SSCR0_P(dev->port);
- ssp->cr1 = SSCR1_P(dev->port);
- ssp->to = SSTO_P(dev->port);
- ssp->psp = SSPSP_P(dev->port);
+ struct ssp_device *ssp = dev->ssp;
- SSCR0_P(dev->port) &= ~SSCR0_SSE;
+ state->cr0 = __raw_readl(ssp->mmio_base + SSCR0);
+ state->cr1 = __raw_readl(ssp->mmio_base + SSCR1);
+ state->to = __raw_readl(ssp->mmio_base + SSTO);
+ state->psp = __raw_readl(ssp->mmio_base + SSPSP);
+
+ ssp_disable(dev);
}
/**
@@ -208,16 +215,18 @@
*
* Restore the SSP configuration saved previously by ssp_save_state.
*/
-void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp)
+void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *state)
{
- SSSR_P(dev->port) = SSSR_ROR | SSSR_TUR | SSSR_BCE;
+ struct ssp_device *ssp = dev->ssp;
+ uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE;
- SSCR0_P(dev->port) = ssp->cr0 & ~SSCR0_SSE;
- SSCR1_P(dev->port) = ssp->cr1;
- SSTO_P(dev->port) = ssp->to;
- SSPSP_P(dev->port) = ssp->psp;
+ __raw_writel(sssr, ssp->mmio_base + SSSR);
- SSCR0_P(dev->port) = ssp->cr0;
+ __raw_writel(state->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0);
+ __raw_writel(state->cr1, ssp->mmio_base + SSCR1);
+ __raw_writel(state->to, ssp->mmio_base + SSTO);
+ __raw_writel(state->psp, ssp->mmio_base + SSPSP);
+ __raw_writel(state->cr0, ssp->mmio_base + SSCR0);
}
/**
@@ -231,15 +240,17 @@
*/
int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed)
{
+ struct ssp_device *ssp = dev->ssp;
+
dev->mode = mode;
dev->flags = flags;
dev->psp_flags = psp_flags;
dev->speed = speed;
/* set up port type, speed, port settings */
- SSCR0_P(dev->port) = (dev->speed | dev->mode);
- SSCR1_P(dev->port) = dev->flags;
- SSPSP_P(dev->port) = dev->psp_flags;
+ __raw_writel((dev->speed | dev->mode), ssp->mmio_base + SSCR0);
+ __raw_writel(dev->flags, ssp->mmio_base + SSCR1);
+ __raw_writel(dev->psp_flags, ssp->mmio_base + SSPSP);
return 0;
}
@@ -256,44 +267,32 @@
*/
int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags)
{
+ struct ssp_device *ssp;
int ret;
- if (port > PXA_SSP_PORTS || port == 0)
+ ssp = ssp_request(port, "SSP");
+ if (ssp == NULL)
return -ENODEV;
- mutex_lock(&mutex);
- if (use_count[port - 1]) {
- mutex_unlock(&mutex);
- return -EBUSY;
- }
- use_count[port - 1]++;
-
- if (!request_mem_region(__PREG(SSCR0_P(port)), 0x2c, "SSP")) {
- use_count[port - 1]--;
- mutex_unlock(&mutex);
- return -EBUSY;
- }
+ dev->ssp = ssp;
dev->port = port;
/* do we need to get irq */
if (!(init_flags & SSP_NO_IRQ)) {
- ret = request_irq(ssp_info[port-1].irq, ssp_interrupt,
+ ret = request_irq(ssp->irq, ssp_interrupt,
0, "SSP", dev);
if (ret)
goto out_region;
- dev->irq = ssp_info[port-1].irq;
+ dev->irq = ssp->irq;
} else
dev->irq = 0;
/* turn on SSP port clock */
- pxa_set_cken(ssp_info[port-1].clock, 1);
- mutex_unlock(&mutex);
+ clk_enable(ssp->clk);
return 0;
out_region:
- release_mem_region(__PREG(SSCR0_P(port)), 0x2c);
- use_count[port - 1]--;
- mutex_unlock(&mutex);
+ ssp_free(ssp);
return ret;
}
@@ -304,22 +303,239 @@
*/
void ssp_exit(struct ssp_dev *dev)
{
- mutex_lock(&mutex);
- SSCR0_P(dev->port) &= ~SSCR0_SSE;
+ struct ssp_device *ssp = dev->ssp;
- if (dev->port > PXA_SSP_PORTS || dev->port == 0) {
- printk(KERN_WARNING "SSP: tried to close invalid port\n");
- mutex_unlock(&mutex);
- return;
+ ssp_disable(dev);
+ free_irq(dev->irq, dev);
+ clk_disable(ssp->clk);
+ ssp_free(ssp);
+}
+
+static DEFINE_MUTEX(ssp_lock);
+static LIST_HEAD(ssp_list);
+
+struct ssp_device *ssp_request(int port, const char *label)
+{
+ struct ssp_device *ssp = NULL;
+
+ mutex_lock(&ssp_lock);
+
+ list_for_each_entry(ssp, &ssp_list, node) {
+ if (ssp->port_id == port && ssp->use_count == 0) {
+ ssp->use_count++;
+ ssp->label = label;
+ break;
+ }
}
- pxa_set_cken(ssp_info[dev->port-1].clock, 0);
- if (dev->irq)
- free_irq(dev->irq, dev);
- release_mem_region(__PREG(SSCR0_P(dev->port)), 0x2c);
- use_count[dev->port - 1]--;
- mutex_unlock(&mutex);
+ mutex_unlock(&ssp_lock);
+
+ if (ssp->port_id != port)
+ return NULL;
+
+ return ssp;
}
+EXPORT_SYMBOL(ssp_request);
+
+void ssp_free(struct ssp_device *ssp)
+{
+ mutex_lock(&ssp_lock);
+ if (ssp->use_count) {
+ ssp->use_count--;
+ ssp->label = NULL;
+ } else
+ dev_err(&ssp->pdev->dev, "device already free\n");
+ mutex_unlock(&ssp_lock);
+}
+EXPORT_SYMBOL(ssp_free);
+
+static int __devinit ssp_probe(struct platform_device *pdev, int type)
+{
+ struct resource *res;
+ struct ssp_device *ssp;
+ int ret = 0;
+
+ ssp = kzalloc(sizeof(struct ssp_device), GFP_KERNEL);
+ if (ssp == NULL) {
+ dev_err(&pdev->dev, "failed to allocate memory");
+ return -ENOMEM;
+ }
+
+ ssp->clk = clk_get(&pdev->dev, "SSPCLK");
+ if (IS_ERR(ssp->clk)) {
+ ret = PTR_ERR(ssp->clk);
+ goto err_free;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ ret = -ENODEV;
+ goto err_free_clk;
+ }
+
+ res = request_mem_region(res->start, res->end - res->start + 1,
+ pdev->name);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "failed to request memory resource\n");
+ ret = -EBUSY;
+ goto err_free_clk;
+ }
+
+ ssp->phys_base = res->start;
+
+ ssp->mmio_base = ioremap(res->start, res->end - res->start + 1);
+ if (ssp->mmio_base == NULL) {
+ dev_err(&pdev->dev, "failed to ioremap() registers\n");
+ ret = -ENODEV;
+ goto err_free_mem;
+ }
+
+ ssp->irq = platform_get_irq(pdev, 0);
+ if (ssp->irq < 0) {
+ dev_err(&pdev->dev, "no IRQ resource defined\n");
+ ret = -ENODEV;
+ goto err_free_io;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no SSP RX DRCMR defined\n");
+ ret = -ENODEV;
+ goto err_free_io;
+ }
+ ssp->drcmr_rx = res->start;
+
+ res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no SSP TX DRCMR defined\n");
+ ret = -ENODEV;
+ goto err_free_io;
+ }
+ ssp->drcmr_tx = res->start;
+
+ /* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id
+ * starts from 0, do a translation here
+ */
+ ssp->port_id = pdev->id + 1;
+ ssp->use_count = 0;
+ ssp->type = type;
+
+ mutex_lock(&ssp_lock);
+ list_add(&ssp->node, &ssp_list);
+ mutex_unlock(&ssp_lock);
+
+ platform_set_drvdata(pdev, ssp);
+ return 0;
+
+err_free_io:
+ iounmap(ssp->mmio_base);
+err_free_mem:
+ release_mem_region(res->start, res->end - res->start + 1);
+err_free_clk:
+ clk_put(ssp->clk);
+err_free:
+ kfree(ssp);
+ return ret;
+}
+
+static int __devexit ssp_remove(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct ssp_device *ssp;
+
+ ssp = platform_get_drvdata(pdev);
+ if (ssp == NULL)
+ return -ENODEV;
+
+ iounmap(ssp->mmio_base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, res->end - res->start + 1);
+
+ clk_put(ssp->clk);
+
+ mutex_lock(&ssp_lock);
+ list_del(&ssp->node);
+ mutex_unlock(&ssp_lock);
+
+ kfree(ssp);
+ return 0;
+}
+
+static int __devinit pxa25x_ssp_probe(struct platform_device *pdev)
+{
+ return ssp_probe(pdev, PXA25x_SSP);
+}
+
+static int __devinit pxa25x_nssp_probe(struct platform_device *pdev)
+{
+ return ssp_probe(pdev, PXA25x_NSSP);
+}
+
+static int __devinit pxa27x_ssp_probe(struct platform_device *pdev)
+{
+ return ssp_probe(pdev, PXA27x_SSP);
+}
+
+static struct platform_driver pxa25x_ssp_driver = {
+ .driver = {
+ .name = "pxa25x-ssp",
+ },
+ .probe = pxa25x_ssp_probe,
+ .remove = __devexit_p(ssp_remove),
+};
+
+static struct platform_driver pxa25x_nssp_driver = {
+ .driver = {
+ .name = "pxa25x-nssp",
+ },
+ .probe = pxa25x_nssp_probe,
+ .remove = __devexit_p(ssp_remove),
+};
+
+static struct platform_driver pxa27x_ssp_driver = {
+ .driver = {
+ .name = "pxa27x-ssp",
+ },
+ .probe = pxa27x_ssp_probe,
+ .remove = __devexit_p(ssp_remove),
+};
+
+static int __init pxa_ssp_init(void)
+{
+ int ret = 0;
+
+ ret = platform_driver_register(&pxa25x_ssp_driver);
+ if (ret) {
+ printk(KERN_ERR "failed to register pxa25x_ssp_driver");
+ return ret;
+ }
+
+ ret = platform_driver_register(&pxa25x_nssp_driver);
+ if (ret) {
+ printk(KERN_ERR "failed to register pxa25x_nssp_driver");
+ return ret;
+ }
+
+ ret = platform_driver_register(&pxa27x_ssp_driver);
+ if (ret) {
+ printk(KERN_ERR "failed to register pxa27x_ssp_driver");
+ return ret;
+ }
+
+ return ret;
+}
+
+static void __exit pxa_ssp_exit(void)
+{
+ platform_driver_unregister(&pxa25x_ssp_driver);
+ platform_driver_unregister(&pxa25x_nssp_driver);
+ platform_driver_unregister(&pxa27x_ssp_driver);
+}
+
+arch_initcall(pxa_ssp_init);
+module_exit(pxa_ssp_exit);
EXPORT_SYMBOL(ssp_write_word);
EXPORT_SYMBOL(ssp_read_word);
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index d774430..167412e 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -17,6 +17,7 @@
.text
+#ifdef CONFIG_PXA27x
ENTRY(pxa_cpu_standby)
ldr r0, =PSSR
mov r1, #(PSSR_PH | PSSR_STS)
@@ -29,3 +30,85 @@
1: mcr p14, 0, r2, c7, c0, 0 @ put the system into Standby
str r1, [r0] @ make sure PSSR_PH/STS are clear
mov pc, lr
+
+#endif
+
+#ifdef CONFIG_PXA3xx
+
+#define MDCNFG 0x0000
+#define MDCNFG_DMCEN (1 << 30)
+#define DDR_HCAL 0x0060
+#define DDR_HCAL_HCRNG 0x1f
+#define DDR_HCAL_HCPROG (1 << 28)
+#define DDR_HCAL_HCEN (1 << 31)
+#define DMCIER 0x0070
+#define DMCIER_EDLP (1 << 29)
+#define DMCISR 0x0078
+#define RCOMP 0x0100
+#define RCOMP_SWEVAL (1 << 31)
+
+ENTRY(pm_enter_standby_start)
+ mov r1, #0xf6000000 @ DMEMC_REG_BASE (MDCNFG)
+ add r1, r1, #0x00100000
+
+ /*
+ * Preload the TLB entry for accessing the dynamic memory
+ * controller registers. Note that page table lookups will
+ * fail until the dynamic memory controller has been
+ * reinitialised - and that includes MMU page table walks.
+ * This also means that only the dynamic memory controller
+ * can be reliably accessed in the code following standby.
+ */
+ ldr r2, [r1] @ Dummy read MDCNFG
+
+ mcr p14, 0, r0, c7, c0, 0
+ .rept 8
+ nop
+ .endr
+
+ ldr r0, [r1, #DDR_HCAL] @ Clear (and wait for) HCEN
+ bic r0, r0, #DDR_HCAL_HCEN
+ str r0, [r1, #DDR_HCAL]
+1: ldr r0, [r1, #DDR_HCAL]
+ tst r0, #DDR_HCAL_HCEN
+ bne 1b
+
+ ldr r0, [r1, #RCOMP] @ Initiate RCOMP
+ orr r0, r0, #RCOMP_SWEVAL
+ str r0, [r1, #RCOMP]
+
+ mov r0, #~0 @ Clear interrupts
+ str r0, [r1, #DMCISR]
+
+ ldr r0, [r1, #DMCIER] @ set DMIER[EDLP]
+ orr r0, r0, #DMCIER_EDLP
+ str r0, [r1, #DMCIER]
+
+ ldr r0, [r1, #DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN
+ bic r0, r0, #DDR_HCAL_HCRNG
+ orr r0, r0, #DDR_HCAL_HCEN | DDR_HCAL_HCPROG
+ str r0, [r1, #DDR_HCAL]
+
+1: ldr r0, [r1, #DMCISR]
+ tst r0, #DMCIER_EDLP
+ beq 1b
+
+ ldr r0, [r1, #MDCNFG] @ set MDCNFG[DMCEN]
+ orr r0, r0, #MDCNFG_DMCEN
+ str r0, [r1, #MDCNFG]
+1: ldr r0, [r1, #MDCNFG]
+ tst r0, #MDCNFG_DMCEN
+ beq 1b
+
+ ldr r0, [r1, #DDR_HCAL] @ set DDR_HCAL[HCRNG]
+ orr r0, r0, #2 @ HCRNG
+ str r0, [r1, #DDR_HCAL]
+
+ ldr r0, [r1, #DMCIER] @ Clear the interrupt
+ bic r0, r0, #0x20000000
+ str r0, [r1, #DMCIER]
+
+ mov pc, lr
+ENTRY(pm_enter_standby_end)
+
+#endif
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index fbfa192..7b7c0179 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -59,55 +59,17 @@
}
+#define MIN_OSCR_DELTA 16
+
static irqreturn_t
pxa_ost0_interrupt(int irq, void *dev_id)
{
- int next_match;
struct clock_event_device *c = dev_id;
- if (c->mode == CLOCK_EVT_MODE_ONESHOT) {
- /* Disarm the compare/match, signal the event. */
- OIER &= ~OIER_E0;
- OSSR = OSSR_M0;
- c->event_handler(c);
- } else if (c->mode == CLOCK_EVT_MODE_PERIODIC) {
- /* Call the event handler as many times as necessary
- * to recover missed events, if any (if we update
- * OSMR0 and OSCR0 is still ahead of us, we've missed
- * the event). As we're dealing with that, re-arm the
- * compare/match for the next event.
- *
- * HACK ALERT:
- *
- * There's a latency between the instruction that
- * writes to OSMR0 and the actual commit to the
- * physical hardware, because the CPU doesn't (have
- * to) run at bus speed, there's a write buffer
- * between the CPU and the bus, etc. etc. So if the
- * target OSCR0 is "very close", to the OSMR0 load
- * value, the update to OSMR0 might not get to the
- * hardware in time and we'll miss that interrupt.
- *
- * To be safe, if the new OSMR0 is "very close" to the
- * target OSCR0 value, we call the event_handler as
- * though the event actually happened. According to
- * Nico's comment in the previous version of this
- * code, experience has shown that 6 OSCR ticks is
- * "very close" but he went with 8. We will use 16,
- * based on the results of testing on PXA270.
- *
- * To be doubly sure, we also tell clkevt via
- * clockevents_register_device() not to ask for
- * anything that might put us "very close".
- */
-#define MIN_OSCR_DELTA 16
- do {
- OSSR = OSSR_M0;
- next_match = (OSMR0 += LATCH);
- c->event_handler(c);
- } while (((signed long)(next_match - OSCR) <= MIN_OSCR_DELTA)
- && (c->mode == CLOCK_EVT_MODE_PERIODIC));
- }
+ /* Disarm the compare/match, signal the event. */
+ OIER &= ~OIER_E0;
+ OSSR = OSSR_M0;
+ c->event_handler(c);
return IRQ_HANDLED;
}
@@ -133,14 +95,6 @@
unsigned long irqflags;
switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- raw_local_irq_save(irqflags);
- OSSR = OSSR_M0;
- OIER |= OIER_E0;
- OSMR0 = OSCR + LATCH;
- raw_local_irq_restore(irqflags);
- break;
-
case CLOCK_EVT_MODE_ONESHOT:
raw_local_irq_save(irqflags);
OIER &= ~OIER_E0;
@@ -158,13 +112,14 @@
break;
case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
break;
}
}
static struct clock_event_device ckevt_pxa_osmr0 = {
.name = "osmr0",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .features = CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
.rating = 200,
.cpumask = CPU_MASK_CPU0,
@@ -214,7 +169,7 @@
ckevt_pxa_osmr0.max_delta_ns =
clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
ckevt_pxa_osmr0.min_delta_ns =
- clockevent_delta2ns(MIN_OSCR_DELTA, &ckevt_pxa_osmr0) + 1;
+ clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_pxa_osmr0) + 1;
cksrc_pxa_oscr0.mult =
clocksource_hz2mult(clock_tick_rate, cksrc_pxa_oscr0.shift);
@@ -226,7 +181,7 @@
}
#ifdef CONFIG_PM
-static unsigned long osmr[4], oier;
+static unsigned long osmr[4], oier, oscr;
static void pxa_timer_suspend(void)
{
@@ -235,23 +190,26 @@
osmr[2] = OSMR2;
osmr[3] = OSMR3;
oier = OIER;
+ oscr = OSCR;
}
static void pxa_timer_resume(void)
{
+ /*
+ * Ensure that we have at least MIN_OSCR_DELTA between match
+ * register 0 and the OSCR, to guarantee that we will receive
+ * the one-shot timer interrupt. We adjust OSMR0 in preference
+ * to OSCR to guarantee that OSCR is monotonically incrementing.
+ */
+ if (osmr[0] - oscr < MIN_OSCR_DELTA)
+ osmr[0] += MIN_OSCR_DELTA;
+
OSMR0 = osmr[0];
OSMR1 = osmr[1];
OSMR2 = osmr[2];
OSMR3 = osmr[3];
OIER = oier;
-
- /*
- * OSCR0 is the system timer, which has to increase
- * monotonically until it rolls over in hardware. The value
- * (OSMR0 - LATCH) is OSCR0 at the most recent system tick,
- * which is a handy value to restore to OSCR0.
- */
- OSCR = OSMR0 - LATCH;
+ OSCR = oscr;
}
#else
#define pxa_timer_suspend NULL
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 240fd04..1919756 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -184,16 +184,13 @@
tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
- err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, IRQF_DISABLED,
+ err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC/SD card detect", data);
- if (err) {
+ if (err)
printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
- return -1;
- }
- set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
-
- return 0;
+ return err;
}
static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index e4ba43b..853fc94 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -296,11 +296,10 @@
err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_RISING,
"MMC card detect", data);
- if (err) {
+ if (err)
printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
- return -1;
- }
- return 0;
+
+ return err;
}
static void trizeps4_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 743a87b..7731d50 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -25,9 +25,13 @@
#include <asm/arch/gpio.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/zylonite.h>
+#include <asm/arch/mmc.h>
#include "generic.h"
+#define MAX_SLOTS 3
+struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
+
int gpio_backlight;
int gpio_eth_irq;
@@ -43,7 +47,7 @@
[1] = {
.start = -1, /* for run-time assignment */
.end = -1,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
@@ -156,6 +160,95 @@
static inline void zylonite_init_lcd(void) {}
#endif
+#if defined(CONFIG_MMC)
+static int zylonite_mci_ro(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ return gpio_get_value(zylonite_mmc_slot[pdev->id].gpio_wp);
+}
+
+static int zylonite_mci_init(struct device *dev,
+ irq_handler_t zylonite_detect_int,
+ void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int err, cd_irq, gpio_cd, gpio_wp;
+
+ cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
+ gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
+ gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
+
+ /*
+ * setup GPIO for Zylonite MMC controller
+ */
+ err = gpio_request(gpio_cd, "mmc card detect");
+ if (err)
+ goto err_request_cd;
+ gpio_direction_input(gpio_cd);
+
+ err = gpio_request(gpio_wp, "mmc write protect");
+ if (err)
+ goto err_request_wp;
+ gpio_direction_input(gpio_wp);
+
+ err = request_irq(cd_irq, zylonite_detect_int,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: MMC/SD/SDIO: "
+ "can't request card detect IRQ\n", __func__);
+ goto err_request_irq;
+ }
+
+ return 0;
+
+err_request_irq:
+ gpio_free(gpio_wp);
+err_request_wp:
+ gpio_free(gpio_cd);
+err_request_cd:
+ return err;
+}
+
+static void zylonite_mci_exit(struct device *dev, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int cd_irq, gpio_cd, gpio_wp;
+
+ cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
+ gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
+ gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
+
+ free_irq(cd_irq, data);
+ gpio_free(gpio_cd);
+ gpio_free(gpio_wp);
+}
+
+static struct pxamci_platform_data zylonite_mci_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = zylonite_mci_init,
+ .exit = zylonite_mci_exit,
+ .get_ro = zylonite_mci_ro,
+};
+
+static struct pxamci_platform_data zylonite_mci2_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+};
+
+static void __init zylonite_init_mmc(void)
+{
+ pxa_set_mci_info(&zylonite_mci_platform_data);
+ pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
+ if (cpu_is_pxa310())
+ pxa3xx_set_mci3_info(&zylonite_mci_platform_data);
+}
+#else
+static inline void zylonite_init_mmc(void) {}
+#endif
+
static void __init zylonite_init(void)
{
/* board-processor specific initialization */
@@ -171,6 +264,7 @@
platform_device_register(&smc91x_device);
zylonite_init_lcd();
+ zylonite_init_mmc();
}
MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 1832bc3..6ac04c0 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -53,13 +53,13 @@
/* BTUART */
GPIO111_UART2_RTS,
- GPIO112_UART2_RXD,
+ GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
GPIO113_UART2_TXD,
- GPIO114_UART2_CTS,
+ GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
/* STUART */
GPIO109_UART3_TXD,
- GPIO110_UART3_RXD,
+ GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
/* AC97 */
GPIO23_AC97_nACRESET,
@@ -70,16 +70,16 @@
GPIO28_AC97_SYNC,
/* Keypad */
- GPIO107_KP_DKIN_0,
- GPIO108_KP_DKIN_1,
- GPIO115_KP_MKIN_0,
- GPIO116_KP_MKIN_1,
- GPIO117_KP_MKIN_2,
- GPIO118_KP_MKIN_3,
- GPIO119_KP_MKIN_4,
- GPIO120_KP_MKIN_5,
- GPIO2_2_KP_MKIN_6,
- GPIO3_2_KP_MKIN_7,
+ GPIO107_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
+ GPIO108_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
+ GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
+ GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
+ GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
+ GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
+ GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
+ GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
+ GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
+ GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
GPIO121_KP_MKOUT_0,
GPIO122_KP_MKOUT_1,
GPIO123_KP_MKOUT_2,
@@ -88,16 +88,33 @@
GPIO4_2_KP_MKOUT_5,
GPIO5_2_KP_MKOUT_6,
GPIO6_2_KP_MKOUT_7,
+
+ /* MMC1 */
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+ GPIO7_MMC1_CLK,
+ GPIO8_MMC1_CMD, /* CMD0 for slot 0 */
+ GPIO15_GPIO, /* CMD1 default as GPIO for slot 0 */
+
+ /* MMC2 */
+ GPIO9_MMC2_DAT0,
+ GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO11_MMC2_DAT2,
+ GPIO12_MMC2_DAT3,
+ GPIO13_MMC2_CLK,
+ GPIO14_MMC2_CMD,
};
static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
/* FFUART */
- GPIO30_UART1_RXD,
+ GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
GPIO31_UART1_TXD,
GPIO32_UART1_CTS,
GPIO37_UART1_RTS,
GPIO33_UART1_DCD,
- GPIO34_UART1_DSR,
+ GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
GPIO35_UART1_RI,
GPIO36_UART1_DTR,
@@ -108,7 +125,7 @@
static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
/* FFUART */
- GPIO99_UART1_RXD,
+ GPIO99_UART1_RXD | MFP_LPM_EDGE_FALL,
GPIO100_UART1_TXD,
GPIO101_UART1_CTS,
GPIO106_UART1_RTS,
@@ -116,6 +133,14 @@
/* Ethernet */
GPIO2_nCS3,
GPIO102_GPIO,
+
+ /* MMC3 */
+ GPIO7_2_MMC3_DAT0,
+ GPIO8_2_MMC3_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO9_2_MMC3_DAT2,
+ GPIO10_2_MMC3_DAT3,
+ GPIO103_MMC3_CLK,
+ GPIO105_MMC3_CMD,
};
#define NUM_LCD_DETECT_PINS 7
@@ -174,6 +199,10 @@
/* GPIO pin assignment */
gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20);
+
+ /* MMC card detect & write protect for controller 0 */
+ zylonite_mmc_slot[0].gpio_cd = EXT_GPIO(0);
+ zylonite_mmc_slot[0].gpio_wp = EXT_GPIO(2);
}
if (cpu_is_pxa300()) {
@@ -184,5 +213,9 @@
if (cpu_is_pxa310()) {
pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
+
+ /* MMC card detect & write protect for controller 2 */
+ zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
+ zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
}
}
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 94c7158..dfa7999 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -51,11 +51,11 @@
GPIO17_2_LCD_BIAS,
/* FFUART */
- GPIO41_UART1_RXD,
+ GPIO41_UART1_RXD | MFP_LPM_EDGE_FALL,
GPIO42_UART1_TXD,
GPIO43_UART1_CTS,
GPIO44_UART1_DCD,
- GPIO45_UART1_DSR,
+ GPIO45_UART1_DSR | MFP_LPM_EDGE_FALL,
GPIO46_UART1_RI,
GPIO47_UART1_DTR,
GPIO48_UART1_RTS,
@@ -73,16 +73,16 @@
GPIO33_I2C_SDA,
/* Keypad */
- GPIO105_KP_DKIN_0,
- GPIO106_KP_DKIN_1,
- GPIO113_KP_MKIN_0,
- GPIO114_KP_MKIN_1,
- GPIO115_KP_MKIN_2,
- GPIO116_KP_MKIN_3,
- GPIO117_KP_MKIN_4,
- GPIO118_KP_MKIN_5,
- GPIO119_KP_MKIN_6,
- GPIO120_KP_MKIN_7,
+ GPIO105_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
+ GPIO106_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
+ GPIO113_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
+ GPIO114_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
+ GPIO115_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
+ GPIO116_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
+ GPIO117_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
+ GPIO118_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
+ GPIO119_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
+ GPIO120_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
GPIO121_KP_MKOUT_0,
GPIO122_KP_MKOUT_1,
GPIO123_KP_MKOUT_2,
@@ -95,6 +95,23 @@
/* Ethernet */
GPIO4_nCS3,
GPIO90_GPIO,
+
+ /* MMC1 */
+ GPIO18_MMC1_DAT0,
+ GPIO19_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO20_MMC1_DAT2,
+ GPIO21_MMC1_DAT3,
+ GPIO22_MMC1_CLK,
+ GPIO23_MMC1_CMD,/* CMD0 for slot 0 */
+ GPIO31_GPIO, /* CMD1 default as GPIO for slot 0 */
+
+ /* MMC2 */
+ GPIO24_MMC2_DAT0,
+ GPIO25_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO26_MMC2_DAT2,
+ GPIO27_MMC2_DAT3,
+ GPIO28_MMC2_CLK,
+ GPIO29_MMC2_CMD,
};
#define NUM_LCD_DETECT_PINS 7
@@ -169,5 +186,9 @@
/* GPIO pin assignment */
gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO14);
gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO9);
+
+ /* MMC card detect & write protect for controller 0 */
+ zylonite_mmc_slot[0].gpio_cd = mfp_to_gpio(MFP_PIN_GPIO1);
+ zylonite_mmc_slot[0].gpio_wp = mfp_to_gpio(MFP_PIN_GPIO5);
}
}
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index c7f1b44..61d7021 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -530,8 +530,6 @@
*/
static irqreturn_t realview_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
-
// ...clear the interrupt
writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
@@ -542,8 +540,6 @@
update_process_times(user_mode(get_irq_regs()));
#endif
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 587864f..6617547 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -530,7 +530,7 @@
.displays = bast_lcd_info,
.num_displays = ARRAY_SIZE(bast_lcd_info),
- .default_display = 4,
+ .default_display = 1,
};
/* Standard BAST devices */
@@ -540,7 +540,6 @@
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
- &s3c_device_iis,
&s3c_device_rtc,
&s3c_device_nand,
&bast_device_nor,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 9f43f3f..3aade7b 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -365,7 +365,6 @@
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
- &s3c_device_iis,
&s3c_device_adc,
&serial_device,
&vr1000_nor,
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index bcd562a..6aec86a 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -60,7 +60,7 @@
static irqreturn_t
usb_simtec_ocirq(int irq, void *pw)
{
- struct s3c2410_hcd_info *info = (struct s3c2410_hcd_info *)pw;
+ struct s3c2410_hcd_info *info = pw;
if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
pr_debug("usb_simtec: over-current irq (oc detected)\n");
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 8e8fe48..0b43431 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -10,6 +10,7 @@
select CPU_LLSERIAL_S3C2440
select S3C2412_PM if PM
select S3C2412_DMA if S3C2410_DMA
+ select S3C2410_GPIO
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index f8e0116..267f334 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -12,8 +12,9 @@
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
obj-$(CONFIG_CPU_S3C2412) += irq.o
obj-$(CONFIG_CPU_S3C2412) += clock.o
+obj-$(CONFIG_CPU_S3C2412) += gpio.o
obj-$(CONFIG_S3C2412_DMA) += dma.o
-obj-$(CONFIG_S3C2412_PM) += pm.o
+obj-$(CONFIG_S3C2412_PM) += pm.o sleep.o
# Machine support
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 4589936..2697a65 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -217,7 +217,7 @@
if (parent == &clk_mdivclk)
clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL;
- else if (parent == &clk_upll)
+ else if (parent == &clk_mpll)
clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL;
else
return -EINVAL;
@@ -234,6 +234,45 @@
.set_parent = s3c2412_setparent_msysclk,
};
+static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
+{
+ unsigned long flags;
+ unsigned long clkdiv;
+ unsigned long dvs;
+
+ /* Note, we current equate fclk andf msysclk for S3C2412 */
+
+ if (parent == &clk_msysclk || parent == &clk_f)
+ dvs = 0;
+ else if (parent == &clk_h)
+ dvs = S3C2412_CLKDIVN_DVSEN;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ /* update this under irq lockdown, clkdivn is not protected
+ * by the clock system. */
+
+ local_irq_save(flags);
+
+ clkdiv = __raw_readl(S3C2410_CLKDIVN);
+ clkdiv &= ~S3C2412_CLKDIVN_DVSEN;
+ clkdiv |= dvs;
+ __raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static struct clk clk_armclk = {
+ .name = "armclk",
+ .id = -1,
+ .parent = &clk_msysclk,
+ .set_parent = s3c2412_setparent_armclk,
+};
+
/* these next clocks have an divider immediately after them,
* so we can register them with their divider and leave out the
* intermediate clock stage
@@ -630,11 +669,13 @@
&clk_erefclk,
&clk_urefclk,
&clk_mrefclk,
+ &clk_armclk,
};
int __init s3c2412_baseclk_add(void)
{
unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
+ unsigned int dvs;
struct clk *clkp;
int ret;
int ptr;
@@ -643,6 +684,8 @@
clk_usb_bus.parent = &clk_usbsrc;
clk_usb_bus.rate = 0x0;
+ clk_f.parent = &clk_msysclk;
+
s3c2412_clk_initparents();
for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
@@ -655,6 +698,15 @@
}
}
+ /* set the dvs state according to what we got at boot time */
+
+ dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN;
+
+ if (dvs)
+ clk_armclk.parent = &clk_h;
+
+ printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off");
+
/* ensure usb bus clock is within correct rate of 48MHz */
if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) {
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 53c1d5bb..1dd8649 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -30,6 +30,7 @@
#include <asm/arch/regs-mem.h>
#include <asm/arch/regs-lcd.h>
#include <asm/arch/regs-sdi.h>
+#include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
#include <asm/plat-s3c24xx/regs-iis.h>
#include <asm/plat-s3c24xx/regs-spi.h>
@@ -39,106 +40,141 @@
[DMACH_XD0] = {
.name = "xdreq0",
.channels = MAP(S3C2412_DMAREQSEL_XDREQ0),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_XDREQ0),
},
[DMACH_XD1] = {
.name = "xdreq1",
.channels = MAP(S3C2412_DMAREQSEL_XDREQ1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_XDREQ1),
},
[DMACH_SDI] = {
.name = "sdi",
.channels = MAP(S3C2412_DMAREQSEL_SDI),
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ .channels_rx = MAP(S3C2412_DMAREQSEL_SDI),
+ .hw_addr.to = S3C2410_PA_SDI + S3C2410_SDIDATA,
+ .hw_addr.from = S3C2410_PA_SDI + S3C2410_SDIDATA,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels = MAP(S3C2412_DMAREQSEL_SPI0TX),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_SPI0RX),
.hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
.hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels = MAP(S3C2412_DMAREQSEL_SPI1TX),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_SPI1RX),
.hw_addr.to = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT,
.hw_addr.from = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels = MAP(S3C2412_DMAREQSEL_UART0_0),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_0),
.hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
.hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels = MAP(S3C2412_DMAREQSEL_UART1_0),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_0),
.hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
.hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels = MAP(S3C2412_DMAREQSEL_UART2_0),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_0),
.hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
.hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_UART0_SRC2] = {
.name = "uart0",
.channels = MAP(S3C2412_DMAREQSEL_UART0_1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_1),
.hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
.hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1_SRC2] = {
.name = "uart1",
.channels = MAP(S3C2412_DMAREQSEL_UART1_1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_1),
.hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
.hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2_SRC2] = {
.name = "uart2",
.channels = MAP(S3C2412_DMAREQSEL_UART2_1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_1),
.hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
.hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
.channels = MAP(S3C2412_DMAREQSEL_TIMER),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_TIMER),
},
[DMACH_I2S_IN] = {
.name = "i2s-sdi",
.channels = MAP(S3C2412_DMAREQSEL_I2SRX),
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ .channels_rx = MAP(S3C2412_DMAREQSEL_I2SRX),
+ .hw_addr.from = S3C2410_PA_IIS + S3C2412_IISRXD,
},
[DMACH_I2S_OUT] = {
.name = "i2s-sdo",
.channels = MAP(S3C2412_DMAREQSEL_I2STX),
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ .channels_rx = MAP(S3C2412_DMAREQSEL_I2STX),
+ .hw_addr.to = S3C2410_PA_IIS + S3C2412_IISTXD,
},
[DMACH_USB_EP1] = {
.name = "usb-ep1",
.channels = MAP(S3C2412_DMAREQSEL_USBEP1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP1),
},
[DMACH_USB_EP2] = {
.name = "usb-ep2",
.channels = MAP(S3C2412_DMAREQSEL_USBEP2),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP2),
},
[DMACH_USB_EP3] = {
.name = "usb-ep3",
.channels = MAP(S3C2412_DMAREQSEL_USBEP3),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP3),
},
[DMACH_USB_EP4] = {
.name = "usb-ep4",
.channels = MAP(S3C2412_DMAREQSEL_USBEP4),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP4),
},
};
+static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan,
+ struct s3c24xx_dma_map *map,
+ enum s3c2410_dmasrc dir)
+{
+ unsigned long chsel;
+
+ if (dir == S3C2410_DMASRC_HW)
+ chsel = map->channels_rx[0];
+ else
+ chsel = map->channels[0];
+
+ chsel &= ~DMA_CH_VALID;
+ chsel |= S3C2412_DMAREQSEL_HW;
+
+ writel(chsel, chan->regs + S3C2412_DMA_DMAREQSEL);
+}
+
static void s3c2412_dma_select(struct s3c2410_dma_chan *chan,
struct s3c24xx_dma_map *map)
{
- writel(map->channels[0] | S3C2412_DMAREQSEL_HW,
- chan->regs + S3C2412_DMA_DMAREQSEL);
+ s3c2412_dma_direction(chan, map, chan->source);
}
static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = {
.select = s3c2412_dma_select,
+ .direction = s3c2412_dma_direction,
.dcon_mask = 0,
.map = s3c2412_dma_mappings,
.map_size = ARRAY_SIZE(s3c2412_dma_mappings),
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
new file mode 100644
index 0000000..8e55c3a
--- /dev/null
+++ b/arch/arm/mach-s3c2412/gpio.c
@@ -0,0 +1,60 @@
+/* linux/arch/arm/mach-s3c2412/gpio.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/.
+ *
+ * S3C2412/S3C2413 specific GPIO support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/hardware.h>
+
+int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
+ unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+ unsigned long flags;
+ unsigned long slpcon;
+
+ offs *= 2;
+
+ if (pin < S3C2410_GPIO_BANKB)
+ return -EINVAL;
+
+ if (pin >= S3C2410_GPIO_BANKF &&
+ pin <= S3C2410_GPIO_BANKG)
+ return -EINVAL;
+
+ if (pin > (S3C2410_GPIO_BANKH + 32))
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ slpcon = __raw_readl(base + 0x0C);
+
+ slpcon &= ~(3 << offs);
+ slpcon |= state << offs;
+
+ __raw_writel(slpcon, base + 0x0C);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index e9d0c76..cc1917b 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -33,6 +33,7 @@
#include <asm/arch/regs-irq.h>
#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-power.h>
#include <asm/plat-s3c24xx/cpu.h>
#include <asm/plat-s3c24xx/irq.h>
@@ -153,6 +154,22 @@
.unmask = s3c2412_irq_cfsdi_unmask,
};
+static int s3c2412_irq_rtc_wake(unsigned int irqno, unsigned int state)
+{
+ unsigned long pwrcfg;
+
+ pwrcfg = __raw_readl(S3C2412_PWRCFG);
+ if (state)
+ pwrcfg &= ~S3C2412_PWRCFG_RTC_MASKIRQ;
+ else
+ pwrcfg |= S3C2412_PWRCFG_RTC_MASKIRQ;
+ __raw_writel(pwrcfg, S3C2412_PWRCFG);
+
+ return s3c_irq_chip.set_wake(irqno, state);
+}
+
+static struct irq_chip s3c2412_irq_rtc_chip;
+
static int s3c2412_irq_add(struct sys_device *sysdev)
{
unsigned int irqno;
@@ -173,6 +190,13 @@
set_irq_flags(irqno, IRQF_VALID);
}
+ /* change RTC IRQ's set wake method */
+
+ s3c2412_irq_rtc_chip = s3c_irq_chip;
+ s3c2412_irq_rtc_chip.set_wake = s3c2412_irq_rtc_wake;
+
+ set_irq_chip(IRQ_RTC, &s3c2412_irq_rtc_chip);
+
return 0;
}
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index 8988dac..d4ffb2d 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -33,6 +33,8 @@
#include <asm/plat-s3c24xx/s3c2412.h>
+extern void s3c2412_sleep_enter(void);
+
static void s3c2412_cpu_suspend(void)
{
unsigned long tmp;
@@ -43,20 +45,7 @@
tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP;
__raw_writel(tmp, S3C2412_PWRCFG);
- /* issue the standby signal into the pm unit. Note, we
- * issue a write-buffer drain just in case */
-
- tmp = 0;
-
- asm("b 1f\n\t"
- ".align 5\n\t"
- "1:\n\t"
- "mcr p15, 0, %0, c7, c10, 4\n\t"
- "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
-
- /* we should never get past here */
-
- panic("sleep resumed to originator?");
+ s3c2412_sleep_enter();
}
static void s3c2412_pm_prepare(void)
@@ -88,7 +77,6 @@
SAVE_ITEM(S3C2412_GPBSLPCON),
SAVE_ITEM(S3C2412_GPCSLPCON),
SAVE_ITEM(S3C2412_GPDSLPCON),
- SAVE_ITEM(S3C2412_GPESLPCON),
SAVE_ITEM(S3C2412_GPFSLPCON),
SAVE_ITEM(S3C2412_GPGSLPCON),
SAVE_ITEM(S3C2412_GPHSLPCON),
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 265cd3f..abf1599 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -168,6 +168,8 @@
fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2);
+ clk_mpll.rate = fclk;
+
tmp = __raw_readl(S3C2410_CLKDIVN);
/* work out clock scalings */
diff --git a/arch/arm/mach-s3c2412/sleep.S b/arch/arm/mach-s3c2412/sleep.S
new file mode 100644
index 0000000..db32cac
--- /dev/null
+++ b/arch/arm/mach-s3c2412/sleep.S
@@ -0,0 +1,68 @@
+/* linux/arch/arm/mach-s3c2412/sleep.S
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 Power Manager low-level sleep support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hardware.h>
+#include <asm/arch/map.h>
+
+#include <asm/arch/regs-irq.h>
+
+ .text
+
+ .global s3c2412_sleep_enter
+
+s3c2412_sleep_enter:
+ mov r0, #0 /* argument for coprocessors */
+ ldr r1, =S3C2410_INTPND
+ ldr r2, =S3C2410_SRCPND
+ ldr r3, =S3C2410_EINTPEND
+
+ teq r0, r0
+ bl s3c2412_sleep_enter1
+ teq pc, r0
+ bl s3c2412_sleep_enter1
+
+ .align 5
+
+ /* this is called twice, first with the Z flag to ensure that the
+ * instructions have been loaded into the cache, and the second
+ * time to try and suspend the system.
+ */
+s3c2412_sleep_enter1:
+ mcr p15, 0, r0, c7, c10, 4
+ mcrne p15, 0, r0, c7, c0, 4
+
+ /* if we return from here, it is because an interrupt was
+ * active when we tried to shutdown. Try and ack the IRQ and
+ * retry, as simply returning causes the system to lock.
+ */
+
+ ldrne r9, [ r1 ]
+ strne r9, [ r1 ]
+ ldrne r9, [ r2 ]
+ strne r9, [ r2 ]
+ ldrne r9, [ r3 ]
+ strne r9, [ r3 ]
+ bne s3c2412_sleep_enter1
+
+ mov pc, r14
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index 79e2ea4..184d804 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -111,14 +111,9 @@
static int s3c2440_clk_add(struct sys_device *sysdev)
{
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
- unsigned long clkdivn;
+ struct clk *clock_upll;
struct clk *clock_h;
struct clk *clock_p;
- struct clk *clock_upll;
-
- printk("S3C2440: Clock Support, DVS %s\n",
- (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
clock_p = clk_get(NULL, "pclk");
clock_h = clk_get(NULL, "hclk");
@@ -129,21 +124,6 @@
return -EINVAL;
}
- /* check rate of UPLL, and if it is near 96MHz, then change
- * to using half the UPLL rate for the system */
-
- if (clk_get_rate(clock_upll) > (94 * MHZ)) {
- clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
- mutex_lock(&clocks_mutex);
-
- clkdivn = __raw_readl(S3C2410_CLKDIVN);
- clkdivn |= S3C2440_CLKDIVN_UCLK;
- __raw_writel(clkdivn, S3C2410_CLKDIVN);
-
- mutex_unlock(&clocks_mutex);
- }
-
s3c2440_clk_cam.parent = clock_h;
s3c2440_clk_ac97.parent = clock_p;
s3c2440_clk_cam_upll.parent = clock_upll;
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c
index 5b9e830..2d030d4 100644
--- a/arch/arm/mach-s3c2442/clock.c
+++ b/arch/arm/mach-s3c2442/clock.c
@@ -115,14 +115,9 @@
static int s3c2442_clk_add(struct sys_device *sysdev)
{
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
- unsigned long clkdivn;
+ struct clk *clock_upll;
struct clk *clock_h;
struct clk *clock_p;
- struct clk *clock_upll;
-
- printk("S3C2442: Clock Support, DVS %s\n",
- (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
clock_p = clk_get(NULL, "pclk");
clock_h = clk_get(NULL, "hclk");
@@ -133,21 +128,6 @@
return -EINVAL;
}
- /* check rate of UPLL, and if it is near 96MHz, then change
- * to using half the UPLL rate for the system */
-
- if (clk_get_rate(clock_upll) > (94 * MHZ)) {
- clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
- mutex_lock(&clocks_mutex);
-
- clkdivn = __raw_readl(S3C2410_CLKDIVN);
- clkdivn |= S3C2440_CLKDIVN_UCLK;
- __raw_writel(clkdivn, S3C2410_CLKDIVN);
-
- mutex_unlock(&clocks_mutex);
- }
-
s3c2442_clk_cam.parent = clock_h;
s3c2442_clk_cam_upll.parent = clock_upll;
diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c
index 59703c6..06206ce 100644
--- a/arch/arm/mach-sa1100/ssp.c
+++ b/arch/arm/mach-sa1100/ssp.c
@@ -29,9 +29,8 @@
{
unsigned int status = Ser4SSSR;
- if (status & SSSR_ROR) {
+ if (status & SSSR_ROR)
printk(KERN_WARNING "SSP: receiver overrun\n");
- }
Ser4SSSR = SSSR_ROR;
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index fdf7b01..c267736 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -14,6 +14,7 @@
#include <linux/irq.h>
#include <linux/timex.h>
#include <linux/signal.h>
+#include <linux/clocksource.h>
#include <asm/mach/time.h>
#include <asm/hardware.h>
@@ -35,23 +36,6 @@
return 0;
}
-/* IRQs are disabled before entering here from do_gettimeofday() */
-static unsigned long sa1100_gettimeoffset (void)
-{
- unsigned long ticks_to_match, elapsed, usec;
-
- /* Get ticks before next timer match */
- ticks_to_match = OSMR0 - OSCR;
-
- /* We need elapsed ticks since last match */
- elapsed = LATCH - ticks_to_match;
-
- /* Now convert them to usec */
- usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH;
-
- return usec;
-}
-
#ifdef CONFIG_NO_IDLE_HZ
static unsigned long initial_match;
static int match_posponed;
@@ -62,8 +46,6 @@
{
unsigned int next_match;
- write_seqlock(&xtime_lock);
-
#ifdef CONFIG_NO_IDLE_HZ
if (match_posponed) {
match_posponed = 0;
@@ -85,8 +67,6 @@
next_match = (OSMR0 += LATCH);
} while ((signed long)(next_match - OSCR) <= 0);
- write_sequnlock(&xtime_lock);
-
return IRQ_HANDLED;
}
@@ -96,6 +76,20 @@
.handler = sa1100_timer_interrupt,
};
+static cycle_t sa1100_read_oscr(void)
+{
+ return OSCR;
+}
+
+static struct clocksource cksrc_sa1100_oscr = {
+ .name = "oscr",
+ .rating = 200,
+ .read = sa1100_read_oscr,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
static void __init sa1100_timer_init(void)
{
unsigned long flags;
@@ -109,6 +103,11 @@
OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */
OSMR0 = OSCR + LATCH; /* set initial match */
local_irq_restore(flags);
+
+ cksrc_sa1100_oscr.mult =
+ clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_sa1100_oscr.shift);
+
+ clocksource_register(&cksrc_sa1100_oscr);
}
#ifdef CONFIG_NO_IDLE_HZ
@@ -182,7 +181,6 @@
.init = sa1100_timer_init,
.suspend = sa1100_timer_suspend,
.resume = sa1100_timer_resume,
- .offset = sa1100_gettimeoffset,
#ifdef CONFIG_NO_IDLE_HZ
.dyn_tick = &sa1100_dyn_tick,
#endif
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index a0545db..09d9f33 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -82,9 +82,7 @@
static irqreturn_t
shark_timer_interrupt(int irq, void *dev_id)
{
- write_seqlock(&xtime_lock);
timer_tick();
- write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 7868f4d..76348f0 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -171,8 +171,8 @@
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor"
- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI
- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI
+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
@@ -342,11 +342,33 @@
select CPU_TLB_V4WBI if MMU
select IO_36
+# Feroceon
+config CPU_FEROCEON
+ bool
+ depends on ARCH_ORION
+ default y
+ select CPU_32v5
+ select CPU_ABRT_EV5T
+ select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
+ select CPU_COPY_V4WB if MMU
+ select CPU_TLB_V4WBI if MMU
+
+config CPU_FEROCEON_OLD_ID
+ bool "Accept early Feroceon cores with an ARM926 ID"
+ depends on CPU_FEROCEON && !CPU_ARM926T
+ default y
+ help
+ This enables the usage of some old Feroceon cores
+ for which the CPU ID is equal to the ARM926 ID.
+ Relevant for Feroceon-1850 and early Feroceon-2850.
+
# ARMv6
config CPU_V6
bool "Support ARM V6 processor"
- depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3
+ depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A
default y if ARCH_MX3
+ default y if ARCH_MSM7X00A
select CPU_32v6
select CPU_ABRT_EV6
select CPU_CACHE_V6
@@ -538,7 +560,7 @@
config ARM_THUMB
bool "Support Thumb user binaries"
- depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 || CPU_V7
+ depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 || CPU_V7 || CPU_FEROCEON
default y
help
Say Y if you want to include kernel support for running user space
@@ -600,7 +622,7 @@
config CPU_DCACHE_WRITETHROUGH
bool "Force write through D-cache"
- depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE
+ depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FEROCEON) && !CPU_DCACHE_DISABLE
default y if CPU_ARM925T
help
Say Y here to use the data cache in writethrough mode. Unless you
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 7627027..44536a0 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -68,6 +68,7 @@
obj-$(CONFIG_CPU_SA1100) += proc-sa1100.o
obj-$(CONFIG_CPU_XSCALE) += proc-xscale.o
obj-$(CONFIG_CPU_XSC3) += proc-xsc3.o
+obj-$(CONFIG_CPU_FEROCEON) += proc-feroceon.o
obj-$(CONFIG_CPU_V6) += proc-v6.o
obj-$(CONFIG_CPU_V7) += proc-v7.o
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index a8a7dab..28ad7ab 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -12,6 +12,7 @@
#include <linux/signal.h>
#include <linux/mm.h>
#include <linux/init.h>
+#include <linux/kprobes.h>
#include <asm/system.h>
#include <asm/pgtable.h>
@@ -20,6 +21,29 @@
#include "fault.h"
+
+#ifdef CONFIG_KPROBES
+static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr)
+{
+ int ret = 0;
+
+ if (!user_mode(regs)) {
+ /* kprobe_running() needs smp_processor_id() */
+ preempt_disable();
+ if (kprobe_running() && kprobe_fault_handler(regs, fsr))
+ ret = 1;
+ preempt_enable();
+ }
+
+ return ret;
+}
+#else
+static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr)
+{
+ return 0;
+}
+#endif
+
/*
* This is useful to dump out the page tables associated with
* 'addr' in mm 'mm'.
@@ -215,13 +239,16 @@
return fault;
}
-static int
+static int __kprobes
do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
{
struct task_struct *tsk;
struct mm_struct *mm;
int fault, sig, code;
+ if (notify_page_fault(regs, fsr))
+ return 0;
+
tsk = current;
mm = tsk->mm;
@@ -311,7 +338,7 @@
* interrupt or a critical region, and should only copy the information
* from the master page table, nothing more.
*/
-static int
+static int __kprobes
do_translation_fault(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
new file mode 100644
index 0000000..fa0dc7e
--- /dev/null
+++ b/arch/arm/mm/proc-feroceon.S
@@ -0,0 +1,506 @@
+/*
+ * linux/arch/arm/mm/proc-feroceon.S: MMU functions for Feroceon
+ *
+ * Heavily based on proc-arm926.S
+ * Maintainer: Assaf Hoffman <hoffman@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/elf.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include "proc-macros.S"
+
+/*
+ * This is the maximum size of an area which will be invalidated
+ * using the single invalidate entry instructions. Anything larger
+ * than this, and we go for the whole cache.
+ *
+ * This value should be chosen such that we choose the cheapest
+ * alternative.
+ */
+#define CACHE_DLIMIT 16384
+
+/*
+ * the cache line size of the I and D cache
+ */
+#define CACHE_DLINESIZE 32
+
+ .text
+/*
+ * cpu_feroceon_proc_init()
+ */
+ENTRY(cpu_feroceon_proc_init)
+ mov pc, lr
+
+/*
+ * cpu_feroceon_proc_fin()
+ */
+ENTRY(cpu_feroceon_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ bl feroceon_flush_kern_cache_all
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x000e @ ............wca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_feroceon_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+ .align 5
+ENTRY(cpu_feroceon_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+#ifdef CONFIG_MMU
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x000f @ ............wcam
+ bic ip, ip, #0x1100 @ ...i...s........
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+/*
+ * cpu_feroceon_do_idle()
+ *
+ * Called with IRQs disabled
+ */
+ .align 10
+ENTRY(cpu_feroceon_do_idle)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer
+ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
+ mov pc, lr
+
+/*
+ * flush_user_cache_all()
+ *
+ * Clean and invalidate all cache entries in a particular
+ * address space.
+ */
+ENTRY(feroceon_flush_user_cache_all)
+ /* FALLTHROUGH */
+
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(feroceon_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
+#else
+1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate
+ bne 1b
+#endif
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Clean and invalidate a range of cache entries in the
+ * specified address range.
+ *
+ * - start - start address (inclusive)
+ * - end - end address (exclusive)
+ * - flags - vm_flags describing address space
+ */
+ENTRY(feroceon_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT
+ bgt __flush_whole_cache
+1: tst r2, #VM_EXEC
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+#else
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+#endif
+ cmp r0, r1
+ blo 1b
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(feroceon_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(feroceon_coherent_user_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - addr - page aligned address
+ */
+ENTRY(feroceon_flush_kern_dcache_page)
+ add r1, r0, #PAGE_SZ
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(feroceon_dma_inv_range)
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ tst r0, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+#endif
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(feroceon_dma_clean_range)
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(feroceon_dma_flush_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1:
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+#else
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ENTRY(feroceon_cache_fns)
+ .long feroceon_flush_kern_cache_all
+ .long feroceon_flush_user_cache_all
+ .long feroceon_flush_user_cache_range
+ .long feroceon_coherent_kern_range
+ .long feroceon_coherent_user_range
+ .long feroceon_flush_kern_dcache_page
+ .long feroceon_dma_inv_range
+ .long feroceon_dma_clean_range
+ .long feroceon_dma_flush_range
+
+ENTRY(cpu_feroceon_dcache_clean_area)
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ subs r1, r1, #CACHE_DLINESIZE
+ bhi 1b
+#endif
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_feroceon_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_feroceon_switch_mm)
+#ifdef CONFIG_MMU
+ mov ip, #0
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
+#else
+@ && 'Clean & Invalidate whole DCache'
+1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate
+ bne 1b
+#endif
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
+ mov pc, lr
+
+/*
+ * cpu_feroceon_set_pte_ext(ptep, pte, ext)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 5
+ENTRY(cpu_feroceon_set_pte_ext)
+#ifdef CONFIG_MMU
+ str r1, [r0], #-2048 @ linux version
+
+ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+ bic r2, r1, #PTE_SMALL_AP_MASK
+ bic r2, r2, #PTE_TYPE_MASK
+ orr r2, r2, #PTE_TYPE_SMALL
+
+ tst r1, #L_PTE_USER @ User?
+ orrne r2, r2, #PTE_SMALL_AP_URO_SRW
+
+ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
+ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
+ movne r2, #0
+
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ eor r3, r2, #0x0a @ C & small page?
+ tst r3, #0x0b
+ biceq r2, r2, #4
+#endif
+ str r2, [r0] @ hardware version
+ mov r0, r0
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+#endif
+ mov pc, lr
+
+ __INIT
+
+ .type __feroceon_setup, #function
+__feroceon_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+#ifdef CONFIG_MMU
+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+#endif
+
+
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mov r0, #4 @ disable write-back on caches explicitly
+ mcr p15, 7, r0, c15, c0, 0
+#endif
+
+ adr r5, feroceon_crval
+ ldmia r5, {r5, r6}
+ mrc p15, 0, r0, c1, c0 @ get control register v4
+ bic r0, r0, r5
+ orr r0, r0, r6
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+ orr r0, r0, #0x4000 @ .1.. .... .... ....
+#endif
+ mov pc, lr
+ .size __feroceon_setup, . - __feroceon_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * .011 0001 ..11 0101
+ *
+ */
+ .type feroceon_crval, #object
+feroceon_crval:
+ crval clear=0x00007f3f, mmuset=0x00003135, ucset=0x00001134
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type feroceon_processor_functions, #object
+feroceon_processor_functions:
+ .word v5t_early_abort
+ .word cpu_feroceon_proc_init
+ .word cpu_feroceon_proc_fin
+ .word cpu_feroceon_reset
+ .word cpu_feroceon_do_idle
+ .word cpu_feroceon_dcache_clean_area
+ .word cpu_feroceon_switch_mm
+ .word cpu_feroceon_set_pte_ext
+ .size feroceon_processor_functions, . - feroceon_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv5te"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v5"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_feroceon_name, #object
+cpu_feroceon_name:
+ .asciz "Feroceon"
+ .size cpu_feroceon_name, . - cpu_feroceon_name
+
+ .align
+
+ .section ".proc.info.init", #alloc, #execinstr
+
+#ifdef CONFIG_CPU_FEROCEON_OLD_ID
+ .type __feroceon_old_id_proc_info,#object
+__feroceon_old_id_proc_info:
+ .long 0x41069260
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __feroceon_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_feroceon_name
+ .long feroceon_processor_functions
+ .long v4wbi_tlb_fns
+ .long v4wb_user_fns
+ .long feroceon_cache_fns
+ .size __feroceon_old_id_proc_info, . - __feroceon_old_id_proc_info
+#endif
+
+ .type __feroceon_proc_info,#object
+__feroceon_proc_info:
+ .long 0x56055310
+ .long 0xfffffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __feroceon_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_feroceon_name
+ .long feroceon_processor_functions
+ .long v4wbi_tlb_fns
+ .long v4wb_user_fns
+ .long feroceon_cache_fns
+ .size __feroceon_proc_info, . - __feroceon_proc_info
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index 83a5f8b..f455233 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -29,7 +29,7 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 0360b1f..45a77df 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -212,7 +212,7 @@
static irqreturn_t mbox_interrupt(int irq, void *p)
{
- struct omap_mbox *mbox = (struct omap_mbox *)p;
+ struct omap_mbox *mbox = p;
if (is_mbox_irq(mbox, IRQ_TX))
__mbox_tx_interrupt(mbox);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index f7b9ccd..2af5bd5 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -98,9 +98,10 @@
static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
{
- struct omap_mcbsp * mcbsp_tx = (struct omap_mcbsp *)(dev_id);
+ struct omap_mcbsp *mcbsp_tx = dev_id;
- DBG("TX IRQ callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
+ DBG("TX IRQ callback : 0x%x\n",
+ OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
complete(&mcbsp_tx->tx_irq_completion);
return IRQ_HANDLED;
@@ -108,9 +109,10 @@
static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
{
- struct omap_mcbsp * mcbsp_rx = (struct omap_mcbsp *)(dev_id);
+ struct omap_mcbsp *mcbsp_rx = dev_id;
- DBG("RX IRQ callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
+ DBG("RX IRQ callback : 0x%x\n",
+ OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
complete(&mcbsp_rx->rx_irq_completion);
return IRQ_HANDLED;
@@ -118,9 +120,10 @@
static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data)
{
- struct omap_mcbsp * mcbsp_dma_tx = (struct omap_mcbsp *)(data);
+ struct omap_mcbsp *mcbsp_dma_tx = data;
- DBG("TX DMA callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2));
+ DBG("TX DMA callback : 0x%x\n",
+ OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2));
/* We can free the channels */
omap_free_dma(mcbsp_dma_tx->dma_tx_lch);
@@ -131,9 +134,10 @@
static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data)
{
- struct omap_mcbsp * mcbsp_dma_rx = (struct omap_mcbsp *)(data);
+ struct omap_mcbsp *mcbsp_dma_rx = data;
- DBG("RX DMA callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2));
+ DBG("RX DMA callback : 0x%x\n",
+ OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2));
/* We can free the channels */
omap_free_dma(mcbsp_dma_rx->dma_rx_lch);
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 8e5ccaa..131d202 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -23,6 +23,7 @@
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += sleep.o
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index 79cda0f..99a4474 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -172,6 +172,15 @@
if (IS_ERR(clk))
return -EINVAL;
+ /* We do not default just do a clk->rate = rate as
+ * the clock may have been made this way by choice.
+ */
+
+ WARN_ON(clk->set_rate == NULL);
+
+ if (clk->set_rate == NULL)
+ return -EINVAL;
+
mutex_lock(&clocks_mutex);
ret = (clk->set_rate)(clk, rate);
mutex_unlock(&clocks_mutex);
@@ -213,6 +222,12 @@
/* base clocks */
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+ clk->rate = rate;
+ return 0;
+}
+
struct clk clk_xtal = {
.name = "xtal",
.id = -1,
@@ -224,6 +239,7 @@
struct clk clk_mpll = {
.name = "mpll",
.id = -1,
+ .set_rate = clk_default_setrate,
};
struct clk clk_upll = {
@@ -239,6 +255,7 @@
.rate = 0,
.parent = &clk_mpll,
.ctrlbit = 0,
+ .set_rate = clk_default_setrate,
};
struct clk clk_h = {
@@ -247,6 +264,7 @@
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
+ .set_rate = clk_default_setrate,
};
struct clk clk_p = {
@@ -255,6 +273,7 @@
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
+ .set_rate = clk_default_setrate,
};
struct clk clk_usb_bus = {
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index aae1b9c..ac9ff16 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -525,7 +525,8 @@
}
} else if (chan->state == S3C2410_DMA_IDLE) {
if (chan->flags & S3C2410_DMAF_AUTOSTART) {
- s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_START);
+ s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
+ S3C2410_DMAOP_START);
}
}
@@ -787,7 +788,7 @@
pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan);
- return 0;
+ return chan->number | DMACH_LOW_LEVEL;
}
EXPORT_SYMBOL(s3c2410_dma_request);
@@ -1173,6 +1174,7 @@
chan->source = source;
chan->dev_addr = devaddr;
+ chan->hw_cfg = hwcfg;
switch (source) {
case S3C2410_DMASRC_HW:
@@ -1184,7 +1186,7 @@
dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
- return 0;
+ break;
case S3C2410_DMASRC_MEM:
/* source is memory */
@@ -1195,11 +1197,19 @@
dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC);
- return 0;
+ break;
+
+ default:
+ printk(KERN_ERR "dma%d: invalid source type (%d)\n",
+ channel, source);
+
+ return -EINVAL;
}
- printk(KERN_ERR "dma%d: invalid source type (%d)\n", channel, source);
- return -EINVAL;
+ if (dma_sel.direction != NULL)
+ (dma_sel.direction)(chan, chan->map, source);
+
+ return 0;
}
EXPORT_SYMBOL(s3c2410_dma_devconfig);
@@ -1227,6 +1237,10 @@
EXPORT_SYMBOL(s3c2410_dma_getposition);
+static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
+{
+ return container_of(dev, struct s3c2410_dma_chan, dev);
+}
/* system device class */
@@ -1234,7 +1248,7 @@
static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
{
- struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev);
+ struct s3c2410_dma_chan *cp = to_dma_chan(dev);
printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
@@ -1256,6 +1270,24 @@
static int s3c2410_dma_resume(struct sys_device *dev)
{
+ struct s3c2410_dma_chan *cp = to_dma_chan(dev);
+ unsigned int no = cp->number | DMACH_LOW_LEVEL;
+
+ /* restore channel's hardware configuration */
+
+ if (!cp->in_use)
+ return 0;
+
+ printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
+
+ s3c2410_dma_config(no, cp->xfer_unit, cp->dcon);
+ s3c2410_dma_devconfig(no, cp->source, cp->hw_cfg, cp->dev_addr);
+
+ /* re-select the dma source for this channel */
+
+ if (cp->map != NULL)
+ dma_sel.select(cp, cp->map);
+
return 0;
}
@@ -1445,6 +1477,7 @@
found:
dmach = &s3c2410_chans[ch];
+ dmach->map = ch_map;
dma_chan_map[channel] = dmach;
/* select the channel */
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index ec3a09c..ee99dcc 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -122,6 +122,19 @@
EXPORT_SYMBOL(s3c2410_gpio_pullup);
+int s3c2410_gpio_getpull(unsigned int pin)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
+ unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+
+ if (pin < S3C2410_GPIO_BANKB)
+ return -EINVAL;
+
+ return (__raw_readl(base + 0x08) & (1L << offs)) ? 1 : 0;
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_getpull);
+
void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
{
void __iomem *base = S3C24XX_GPIO_BASE(pin);
@@ -186,3 +199,19 @@
}
EXPORT_SYMBOL(s3c2410_gpio_getirq);
+
+int s3c2410_gpio_irq2pin(unsigned int irq)
+{
+ if (irq >= IRQ_EINT0 && irq <= IRQ_EINT3)
+ return S3C2410_GPF0 + (irq - IRQ_EINT0);
+
+ if (irq >= IRQ_EINT4 && irq <= IRQ_EINT7)
+ return S3C2410_GPF4 + (irq - IRQ_EINT4);
+
+ if (irq >= IRQ_EINT8 && irq <= IRQ_EINT23)
+ return S3C2410_GPG0 + (irq - IRQ_EINT8);
+
+ return -EINVAL;
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_irq2pin);
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 8fbc884..d486f51 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -187,7 +187,7 @@
.set_wake = s3c_irq_wake
};
-static struct irq_chip s3c_irq_chip = {
+struct irq_chip s3c_irq_chip = {
.name = "s3c",
.ack = s3c_irq_ack,
.mask = s3c_irq_mask,
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 4fdb311..bf5581a 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -83,38 +83,39 @@
SAVE_ITEM(S3C2410_REFRESH),
};
-static struct sleep_save gpio_save[] = {
- SAVE_ITEM(S3C2410_GPACON),
- SAVE_ITEM(S3C2410_GPADAT),
+static struct gpio_sleep {
+ void __iomem *base;
+ unsigned int gpcon;
+ unsigned int gpdat;
+ unsigned int gpup;
+} gpio_save[] = {
+ [0] = {
+ .base = S3C2410_GPACON,
+ },
+ [1] = {
+ .base = S3C2410_GPBCON,
+ },
+ [2] = {
+ .base = S3C2410_GPCCON,
+ },
+ [3] = {
+ .base = S3C2410_GPDCON,
+ },
+ [4] = {
+ .base = S3C2410_GPECON,
+ },
+ [5] = {
+ .base = S3C2410_GPFCON,
+ },
+ [6] = {
+ .base = S3C2410_GPGCON,
+ },
+ [7] = {
+ .base = S3C2410_GPHCON,
+ },
+};
- SAVE_ITEM(S3C2410_GPBCON),
- SAVE_ITEM(S3C2410_GPBDAT),
- SAVE_ITEM(S3C2410_GPBUP),
-
- SAVE_ITEM(S3C2410_GPCCON),
- SAVE_ITEM(S3C2410_GPCDAT),
- SAVE_ITEM(S3C2410_GPCUP),
-
- SAVE_ITEM(S3C2410_GPDCON),
- SAVE_ITEM(S3C2410_GPDDAT),
- SAVE_ITEM(S3C2410_GPDUP),
-
- SAVE_ITEM(S3C2410_GPECON),
- SAVE_ITEM(S3C2410_GPEDAT),
- SAVE_ITEM(S3C2410_GPEUP),
-
- SAVE_ITEM(S3C2410_GPFCON),
- SAVE_ITEM(S3C2410_GPFDAT),
- SAVE_ITEM(S3C2410_GPFUP),
-
- SAVE_ITEM(S3C2410_GPGCON),
- SAVE_ITEM(S3C2410_GPGDAT),
- SAVE_ITEM(S3C2410_GPGUP),
-
- SAVE_ITEM(S3C2410_GPHCON),
- SAVE_ITEM(S3C2410_GPHDAT),
- SAVE_ITEM(S3C2410_GPHUP),
-
+static struct sleep_save misc_save[] = {
SAVE_ITEM(S3C2410_DCLKCON),
};
@@ -486,6 +487,184 @@
}
}
+/* offsets for CON/DAT/UP registers */
+
+#define OFFS_CON (S3C2410_GPACON - S3C2410_GPACON)
+#define OFFS_DAT (S3C2410_GPADAT - S3C2410_GPACON)
+#define OFFS_UP (S3C2410_GPBUP - S3C2410_GPBCON)
+
+/* s3c2410_pm_save_gpios()
+ *
+ * Save the state of the GPIOs
+ */
+
+static void s3c2410_pm_save_gpios(void)
+{
+ struct gpio_sleep *gps = gpio_save;
+ unsigned int gpio;
+
+ for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
+ void __iomem *base = gps->base;
+
+ gps->gpcon = __raw_readl(base + OFFS_CON);
+ gps->gpdat = __raw_readl(base + OFFS_DAT);
+
+ if (gpio > 0)
+ gps->gpup = __raw_readl(base + OFFS_UP);
+
+ }
+}
+
+/* Test whether the given masked+shifted bits of an GPIO configuration
+ * are one of the SFN (special function) modes. */
+
+static inline int is_sfn(unsigned long con)
+{
+ return (con == 2 || con == 3);
+}
+
+/* Test if the given masked+shifted GPIO configuration is an input */
+
+static inline int is_in(unsigned long con)
+{
+ return con == 0;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an output */
+
+static inline int is_out(unsigned long con)
+{
+ return con == 1;
+}
+
+/* s3c2410_pm_restore_gpio()
+ *
+ * Restore one of the GPIO banks that was saved during suspend. This is
+ * not as simple as once thought, due to the possibility of glitches
+ * from the order that the CON and DAT registers are set in.
+ *
+ * The three states the pin can be are {IN,OUT,SFN} which gives us 9
+ * combinations of changes to check. Three of these, if the pin stays
+ * in the same configuration can be discounted. This leaves us with
+ * the following:
+ *
+ * { IN => OUT } Change DAT first
+ * { IN => SFN } Change CON first
+ * { OUT => SFN } Change CON first, so new data will not glitch
+ * { OUT => IN } Change CON first, so new data will not glitch
+ * { SFN => IN } Change CON first
+ * { SFN => OUT } Change DAT first, so new data will not glitch [1]
+ *
+ * We do not currently deal with the UP registers as these control
+ * weak resistors, so a small delay in change should not need to bring
+ * these into the calculations.
+ *
+ * [1] this assumes that writing to a pin DAT whilst in SFN will set the
+ * state for when it is next output.
+ */
+
+static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps)
+{
+ void __iomem *base = gps->base;
+ unsigned long gps_gpcon = gps->gpcon;
+ unsigned long gps_gpdat = gps->gpdat;
+ unsigned long old_gpcon;
+ unsigned long old_gpdat;
+ unsigned long old_gpup = 0x0;
+ unsigned long gpcon;
+ int nr;
+
+ old_gpcon = __raw_readl(base + OFFS_CON);
+ old_gpdat = __raw_readl(base + OFFS_DAT);
+
+ if (base == S3C2410_GPACON) {
+ /* GPACON only has one bit per control / data and no PULLUPs.
+ * GPACON[x] = 0 => Output, 1 => SFN */
+
+ /* first set all SFN bits to SFN */
+
+ gpcon = old_gpcon | gps->gpcon;
+ __raw_writel(gpcon, base + OFFS_CON);
+
+ /* now set all the other bits */
+
+ __raw_writel(gps_gpdat, base + OFFS_DAT);
+ __raw_writel(gps_gpcon, base + OFFS_CON);
+ } else {
+ unsigned long old, new, mask;
+ unsigned long change_mask = 0x0;
+
+ old_gpup = __raw_readl(base + OFFS_UP);
+
+ /* Create a change_mask of all the items that need to have
+ * their CON value changed before their DAT value, so that
+ * we minimise the work between the two settings.
+ */
+
+ for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
+ old = (old_gpcon & mask) >> nr;
+ new = (gps_gpcon & mask) >> nr;
+
+ /* If there is no change, then skip */
+
+ if (old == new)
+ continue;
+
+ /* If both are special function, then skip */
+
+ if (is_sfn(old) && is_sfn(new))
+ continue;
+
+ /* Change is IN => OUT, do not change now */
+
+ if (is_in(old) && is_out(new))
+ continue;
+
+ /* Change is SFN => OUT, do not change now */
+
+ if (is_sfn(old) && is_out(new))
+ continue;
+
+ /* We should now be at the case of IN=>SFN,
+ * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+ change_mask |= mask;
+ }
+
+ /* Write the new CON settings */
+
+ gpcon = old_gpcon & ~change_mask;
+ gpcon |= gps_gpcon & change_mask;
+
+ __raw_writel(gpcon, base + OFFS_CON);
+
+ /* Now change any items that require DAT,CON */
+
+ __raw_writel(gps_gpdat, base + OFFS_DAT);
+ __raw_writel(gps_gpcon, base + OFFS_CON);
+ __raw_writel(gps->gpup, base + OFFS_UP);
+ }
+
+ DBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
+ index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+
+/** s3c2410_pm_restore_gpios()
+ *
+ * Restore the state of the GPIOs
+ */
+
+static void s3c2410_pm_restore_gpios(void)
+{
+ struct gpio_sleep *gps = gpio_save;
+ int gpio;
+
+ for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
+ s3c2410_pm_restore_gpio(gpio, gps);
+ }
+}
+
void (*pm_cpu_prep)(void);
void (*pm_cpu_sleep)(void);
@@ -535,7 +714,8 @@
/* save all necessary core registers not covered by the drivers */
- s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
+ s3c2410_pm_save_gpios();
+ s3c2410_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
@@ -585,8 +765,9 @@
/* restore the system state */
s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
- s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save));
+ s3c2410_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
+ s3c2410_pm_restore_gpios();
s3c2410_pm_debug_init();
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
new file mode 100644
index 0000000..faf3e0f
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -0,0 +1,137 @@
+/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
+ *
+ * Copyright (c) 2004-2005,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2440/S3C2442 Common clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-clock.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
+{
+ unsigned long camdivn;
+ unsigned long dvs;
+
+ if (parent == &clk_f)
+ dvs = 0;
+ else if (parent == &clk_h)
+ dvs = S3C2440_CAMDIVN_DVSEN;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ camdivn = __raw_readl(S3C2440_CAMDIVN);
+ camdivn &= ~S3C2440_CAMDIVN_DVSEN;
+ camdivn |= dvs;
+ __raw_writel(camdivn, S3C2440_CAMDIVN);
+
+ return 0;
+}
+
+static struct clk clk_arm = {
+ .name = "armclk",
+ .id = -1,
+ .set_parent = s3c2440_setparent_armclk,
+};
+
+static int s3c244x_clk_add(struct sys_device *sysdev)
+{
+ unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
+ unsigned long clkdivn;
+ struct clk *clock_upll;
+ int ret;
+
+ printk("S3C244X: Clock Support, DVS %s\n",
+ (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
+
+ clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f;
+
+ ret = s3c24xx_register_clock(&clk_arm);
+ if (ret < 0) {
+ printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret);
+ return ret;
+ }
+
+ clock_upll = clk_get(NULL, "upll");
+ if (IS_ERR(clock_upll)) {
+ printk(KERN_ERR "S3C244X: Failed to get upll clock\n");
+ return -ENOENT;
+ }
+
+ /* check rate of UPLL, and if it is near 96MHz, then change
+ * to using half the UPLL rate for the system */
+
+ if (clk_get_rate(clock_upll) > (94 * MHZ)) {
+ clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
+
+ mutex_lock(&clocks_mutex);
+
+ clkdivn = __raw_readl(S3C2410_CLKDIVN);
+ clkdivn |= S3C2440_CLKDIVN_UCLK;
+ __raw_writel(clkdivn, S3C2410_CLKDIVN);
+
+ mutex_unlock(&clocks_mutex);
+ }
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2440_clk_driver = {
+ .add = s3c244x_clk_add,
+};
+
+static int s3c2440_clk_init(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver);
+}
+
+arch_initcall(s3c2440_clk_init);
+
+static struct sysdev_driver s3c2442_clk_driver = {
+ .add = s3c244x_clk_add,
+};
+
+static int s3c2442_clk_init(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver);
+}
+
+arch_initcall(s3c2442_clk_init);
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 0a9a5e7..7ed58c0 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Fri May 11 19:53:41 2007
+# Last update: Sat Jan 26 14:45:34 2008
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -266,7 +266,7 @@
wismo SA1100_WISMO WISMO 249
ezlinx ARCH_EZLINX EZLINX 250
at91rm9200 ARCH_AT91RM9200 AT91RM9200 251
-orion ARCH_ORION ORION 252
+adtech_orion ARCH_ADTECH_ORION ADTECH_ORION 252
neptune ARCH_NEPTUNE NEPTUNE 253
hackkit SA1100_HACKKIT HACKKIT 254
pxa_wins30 ARCH_PXA_WINS30 PXA_WINS30 255
@@ -661,7 +661,6 @@
pnx0105 MACH_PNX0105 PNX0105 646
adcpoecpu MACH_ADCPOECPU ADCPOECPU 647
csb637 MACH_CSB637 CSB637 648
-ml69q6203 MACH_ML69Q6203 ML69Q6203 649
mb9200 MACH_MB9200 MB9200 650
kulun MACH_KULUN KULUN 651
snapper MACH_SNAPPER SNAPPER 652
@@ -953,7 +952,6 @@
ttg_color1 MACH_TTG_COLOR1 TTG_COLOR1 940
nxeb500hmi MACH_NXEB500HMI NXEB500HMI 941
netdcu8 MACH_NETDCU8 NETDCU8 942
-ml675050_cpu_boa MACH_ML675050_CPU_BOA ML675050_CPU_BOA 943
ng_fvx538 MACH_NG_FVX538 NG_FVX538 944
ng_fvs338 MACH_NG_FVS338 NG_FVS338 945
pnx4103 MACH_PNX4103 PNX4103 946
@@ -1148,7 +1146,7 @@
rema MACH_REMA REMA 1135
bps1000 MACH_BPS1000 BPS1000 1136
hw90350 MACH_HW90350 HW90350 1137
-omap_sdp3430 MACH_OMAP_SDP3430 OMAP_SDP3430 1138
+omap_3430sdp MACH_OMAP_3430SDP OMAP_3430SDP 1138
bluetouch MACH_BLUETOUCH BLUETOUCH 1139
vstms MACH_VSTMS VSTMS 1140
xsbase270 MACH_XSBASE270 XSBASE270 1141
@@ -1214,7 +1212,7 @@
kbat9261 MACH_KBAT9261 KBAT9261 1204
ct1100 MACH_CT1100 CT1100 1205
akcppxa MACH_AKCPPXA AKCPPXA 1206
-zevio_1020 MACH_ZEVIO_1020 ZEVIO_1020 1207
+ochaya1020 MACH_OCHAYA1020 OCHAYA1020 1207
hitrack MACH_HITRACK HITRACK 1208
syme1 MACH_SYME1 SYME1 1209
syhl1 MACH_SYHL1 SYHL1 1210
@@ -1299,7 +1297,7 @@
h4300 MACH_H4300 H4300 1291
goramo_mlr MACH_GORAMO_MLR GORAMO_MLR 1292
mxc30020evb MACH_MXC30020EVB MXC30020EVB 1293
-adsbitsymx MACH_ADSBITSIMX ADSBITSIMX 1294
+adsbitsyg5 MACH_ADSBITSYG5 ADSBITSYG5 1294
adsportalplus MACH_ADSPORTALPLUS ADSPORTALPLUS 1295
mmsp2plus MACH_MMSP2PLUS MMSP2PLUS 1296
em_x270 MACH_EM_X270 EM_X270 1297
@@ -1367,3 +1365,249 @@
csb726 MACH_CSB726 CSB726 1359
tik27 MACH_TIK27 TIK27 1360
mx_uc7420 MACH_MX_UC7420 MX_UC7420 1361
+rirm3 MACH_RIRM3 RIRM3 1362
+pelco_odyssey MACH_PELCO_ODYSSEY PELCO_ODYSSEY 1363
+adx_abox MACH_ADX_ABOX ADX_ABOX 1365
+adx_tpid MACH_ADX_TPID ADX_TPID 1366
+minicheck MACH_MINICHECK MINICHECK 1367
+idam MACH_IDAM IDAM 1368
+mario_mx MACH_MARIO_MX MARIO_MX 1369
+vi1888 MACH_VI1888 VI1888 1370
+zr4230 MACH_ZR4230 ZR4230 1371
+t1_ix_blue MACH_T1_IX_BLUE T1_IX_BLUE 1372
+syhq2 MACH_SYHQ2 SYHQ2 1373
+computime_r3 MACH_COMPUTIME_R3 COMPUTIME_R3 1374
+oratis MACH_ORATIS ORATIS 1375
+mikko MACH_MIKKO MIKKO 1376
+holon MACH_HOLON HOLON 1377
+olip8 MACH_OLIP8 OLIP8 1378
+ghi270hg MACH_GHI270HG GHI270HG 1379
+davinci_dm6467_evm MACH_DAVINCI_DM6467_EVM DAVINCI_DM6467_EVM 1380
+davinci_dm355_evm MACH_DAVINCI_DM350_EVM DAVINCI_DM350_EVM 1381
+blackriver MACH_BLACKRIVER BLACKRIVER 1383
+sandgate_wp MACH_SANDGATEWP SANDGATEWP 1384
+cdotbwsg MACH_CDOTBWSG CDOTBWSG 1385
+quark963 MACH_QUARK963 QUARK963 1386
+csb735 MACH_CSB735 CSB735 1387
+littleton MACH_LITTLETON LITTLETON 1388
+mio_p550 MACH_MIO_P550 MIO_P550 1389
+motion2440 MACH_MOTION2440 MOTION2440 1390
+imm500 MACH_IMM500 IMM500 1391
+homematic MACH_HOMEMATIC HOMEMATIC 1392
+ermine MACH_ERMINE ERMINE 1393
+kb9202b MACH_KB9202B KB9202B 1394
+hs1xx MACH_HS1XX HS1XX 1395
+studentmate2440 MACH_STUDENTMATE2440 STUDENTMATE2440 1396
+arvoo_l1_z1 MACH_ARVOO_L1_Z1 ARVOO_L1_Z1 1397
+dep2410k MACH_DEP2410K DEP2410K 1398
+xxsvideo MACH_XXSVIDEO XXSVIDEO 1399
+im4004 MACH_IM4004 IM4004 1400
+ochaya1050 MACH_OCHAYA1050 OCHAYA1050 1401
+lep9261 MACH_LEP9261 LEP9261 1402
+svenmeb MACH_SVENMEB SVENMEB 1403
+fortunet2ne MACH_FORTUNET2NE FORTUNET2NE 1404
+nxhx MACH_NXHX NXHX 1406
+realview_pb11mp MACH_REALVIEW_PB11MP REALVIEW_PB11MP 1407
+ids500 MACH_IDS500 IDS500 1408
+ors_n725 MACH_ORS_N725 ORS_N725 1409
+hsdarm MACH_HSDARM HSDARM 1410
+sha_pon003 MACH_SHA_PON003 SHA_PON003 1411
+sha_pon004 MACH_SHA_PON004 SHA_PON004 1412
+sha_pon007 MACH_SHA_PON007 SHA_PON007 1413
+sha_pon011 MACH_SHA_PON011 SHA_PON011 1414
+h6042 MACH_H6042 H6042 1415
+h6043 MACH_H6043 H6043 1416
+looxc550 MACH_LOOXC550 LOOXC550 1417
+cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418
+app3xx MACH_APP3XX APP3XX 1419
+sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420
+xscale_palmt700p MACH_XSCALE_PALMT700P XSCALE_PALMT700P 1421
+xscale_palmt700w MACH_XSCALE_PALMT700W XSCALE_PALMT700W 1422
+xscale_palmt750 MACH_XSCALE_PALMT750 XSCALE_PALMT750 1423
+xscale_palmt755p MACH_XSCALE_PALMT755P XSCALE_PALMT755P 1424
+ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425
+sarge MACH_SARGE SARGE 1426
+a696 MACH_A696 A696 1427
+turtle1916 MACH_TURTLE TURTLE 1428
+mx27_3ds MACH_MX27_3DS MX27_3DS 1430
+bishop MACH_BISHOP BISHOP 1431
+pxx MACH_PXX PXX 1432
+redwood MACH_REDWOOD REDWOOD 1433
+omap_2430dlp MACH_OMAP_2430DLP OMAP_2430DLP 1436
+omap_2430osk MACH_OMAP_2430OSK OMAP_2430OSK 1437
+sardine MACH_SARDINE SARDINE 1438
+halibut MACH_HALIBUT HALIBUT 1439
+trout MACH_TROUT TROUT 1440
+goldfish MACH_GOLDFISH GOLDFISH 1441
+gesbc2440 MACH_GESBC2440 GESBC2440 1442
+nomad MACH_NOMAD NOMAD 1443
+rosalind MACH_ROSALIND ROSALIND 1444
+cc9p9215 MACH_CC9P9215 CC9P9215 1445
+cc9p9210 MACH_CC9P9210 CC9P9210 1446
+cc9p9215js MACH_CC9P9215JS CC9P9215JS 1447
+cc9p9210js MACH_CC9P9210JS CC9P9210JS 1448
+nasffe MACH_NASFFE NASFFE 1449
+tn2x0bd MACH_TN2X0BD TN2X0BD 1450
+gwmpxa MACH_GWMPXA GWMPXA 1451
+exyplus MACH_EXYPLUS EXYPLUS 1452
+jadoo21 MACH_JADOO21 JADOO21 1453
+looxn560 MACH_LOOXN560 LOOXN560 1454
+bonsai MACH_BONSAI BONSAI 1455
+adsmilgato MACH_ADSMILGATO ADSMILGATO 1456
+gba MACH_GBA GBA 1457
+h6044 MACH_H6044 H6044 1458
+app MACH_APP APP 1459
+tct_hammer MACH_TCT_HAMMER TCT_HAMMER 1460
+herald MACH_HERMES HERMES 1461
+artemis MACH_ARTEMIS ARTEMIS 1462
+htctitan MACH_HTCTITAN HTCTITAN 1463
+qranium MACH_QRANIUM QRANIUM 1464
+adx_wsc2 MACH_ADX_WSC2 ADX_WSC2 1465
+adx_medinet MACH_ADX_MEDINET ADX_MEDINET 1466
+bboard MACH_BBOARD BBOARD 1467
+cambria MACH_CAMBRIA CAMBRIA 1468
+mt7xxx MACH_MT7XXX MT7XXX 1469
+matrix512 MACH_MATRIX512 MATRIX512 1470
+matrix522 MACH_MATRIX522 MATRIX522 1471
+ipac5010 MACH_IPAC5010 IPAC5010 1472
+sakura MACH_SAKURA SAKURA 1473
+grocx MACH_GROCX GROCX 1474
+pm9263 MACH_PM9263 PM9263 1475
+sim_one MACH_SIM_ONE SIM_ONE 1476
+acq132 MACH_ACQ132 ACQ132 1477
+datr MACH_DATR DATR 1478
+actux1 MACH_ACTUX1 ACTUX1 1479
+actux2 MACH_ACTUX2 ACTUX2 1480
+actux3 MACH_ACTUX3 ACTUX3 1481
+flexit MACH_FLEXIT FLEXIT 1482
+bh2x0bd MACH_BH2X0BD BH2X0BD 1483
+atb2002 MACH_ATB2002 ATB2002 1484
+xenon MACH_XENON XENON 1485
+fm607 MACH_FM607 FM607 1486
+matrix514 MACH_MATRIX514 MATRIX514 1487
+matrix524 MACH_MATRIX524 MATRIX524 1488
+inpod MACH_INPOD INPOD 1489
+jive MACH_JIVE JIVE 1490
+tll_mx21 MACH_TLL_MX21 TLL_MX21 1491
+sbc2800 MACH_SBC2800 SBC2800 1492
+cc7ucamry MACH_CC7UCAMRY CC7UCAMRY 1493
+ubisys_p9_sc15 MACH_UBISYS_P9_SC15 UBISYS_P9_SC15 1494
+ubisys_p9_ssc2d10 MACH_UBISYS_P9_SSC2D10 UBISYS_P9_SSC2D10 1495
+ubisys_p9_rcu3 MACH_UBISYS_P9_RCU3 UBISYS_P9_RCU3 1496
+aml_m8000 MACH_AML_M8000 AML_M8000 1497
+snapper_270 MACH_SNAPPER_270 SNAPPER_270 1498
+omap_bbx MACH_OMAP_BBX OMAP_BBX 1499
+ucn2410 MACH_UCN2410 UCN2410 1500
+sam9_l9260 MACH_SAM9_L9260 SAM9_L9260 1501
+eti_c2 MACH_ETI_C2 ETI_C2 1502
+avalanche MACH_AVALANCHE AVALANCHE 1503
+realview_pb1176 MACH_REALVIEW_PB1176 REALVIEW_PB1176 1504
+dp1500 MACH_DP1500 DP1500 1505
+apple_iphone MACH_APPLE_IPHONE APPLE_IPHONE 1506
+yl9200 MACH_YL9200 YL9200 1507
+rd88f5182 MACH_RD88F5182 RD88F5182 1508
+kurobox_pro MACH_KUROBOX_PRO KUROBOX_PRO 1509
+se_poet MACH_SE_POET SE_POET 1510
+mx31_3ds MACH_MX31_3DS MX31_3DS 1511
+r270 MACH_R270 R270 1512
+armour21 MACH_ARMOUR21 ARMOUR21 1513
+dt2 MACH_DT2 DT2 1514
+vt4 MACH_VT4 VT4 1515
+tyco320 MACH_TYCO320 TYCO320 1516
+adma MACH_ADMA ADMA 1517
+wp188 MACH_WP188 WP188 1518
+corsica MACH_CORSICA CORSICA 1519
+bigeye MACH_BIGEYE BIGEYE 1520
+tll5000 MACH_TLL5000 TLL5000 1522
+hni270 MACH_HNI_X270 HNI_X270 1523
+qong MACH_QONG QONG 1524
+tcompact MACH_TCOMPACT TCOMPACT 1525
+puma5 MACH_PUMA5 PUMA5 1526
+elara MACH_ELARA ELARA 1527
+ellington MACH_ELLINGTON ELLINGTON 1528
+xda_atom MACH_XDA_ATOM XDA_ATOM 1529
+energizer2 MACH_ENERGIZER2 ENERGIZER2 1530
+odin MACH_ODIN ODIN 1531
+actux4 MACH_ACTUX4 ACTUX4 1532
+esl_omap MACH_ESL_OMAP ESL_OMAP 1533
+omap2evm MACH_OMAP2EVM OMAP2EVM 1534
+omap3evm MACH_OMAP3EVM OMAP3EVM 1535
+adx_pcu57 MACH_ADX_PCU57 ADX_PCU57 1536
+monaco MACH_MONACO MONACO 1537
+levante MACH_LEVANTE LEVANTE 1538
+tmxipx425 MACH_TMXIPX425 TMXIPX425 1539
+leep MACH_LEEP LEEP 1540
+raad MACH_RAAD RAAD 1541
+dns323 MACH_DNS323 DNS323 1542
+ap1000 MACH_AP1000 AP1000 1543
+a9sam6432 MACH_A9SAM6432 A9SAM6432 1544
+shiny MACH_SHINY SHINY 1545
+omap3_beagle MACH_OMAP3_BEAGLE OMAP3_BEAGLE 1546
+csr_bdb2 MACH_CSR_BDB2 CSR_BDB2 1547
+nokia_n810 MACH_NOKIA_N810 NOKIA_N810 1548
+c270 MACH_C270 C270 1549
+sentry MACH_SENTRY SENTRY 1550
+pcm038 MACH_PCM038 PCM038 1551
+anc300 MACH_ANC300 ANC300 1552
+htckaiser MACH_HTCKAISER HTCKAISER 1553
+sbat100 MACH_SBAT100 SBAT100 1554
+modunorm MACH_MODUNORM MODUNORM 1555
+pelos_twarm MACH_PELOS_TWARM PELOS_TWARM 1556
+flank MACH_FLANK FLANK 1557
+sirloin MACH_SIRLOIN SIRLOIN 1558
+brisket MACH_BRISKET BRISKET 1559
+chuck MACH_CHUCK CHUCK 1560
+otter MACH_OTTER OTTER 1561
+davinci_ldk MACH_DAVINCI_LDK DAVINCI_LDK 1562
+phreedom MACH_PHREEDOM PHREEDOM 1563
+sg310 MACH_SG310 SG310 1564
+ts_x09 MACH_TS209 TS209 1565
+at91cap9adk MACH_AT91CAP9ADK AT91CAP9ADK 1566
+tion9315 MACH_TION9315 TION9315 1567
+mast MACH_MAST MAST 1568
+pfw MACH_PFW PFW 1569
+yl_p2440 MACH_YL_P2440 YL_P2440 1570
+zsbc32 MACH_ZSBC32 ZSBC32 1571
+omap_pace2 MACH_OMAP_PACE2 OMAP_PACE2 1572
+imx_pace2 MACH_IMX_PACE2 IMX_PACE2 1573
+mx31moboard MACH_MX31MOBOARD MX31MOBOARD 1574
+mx37_3ds MACH_MX37_3DS MX37_3DS 1575
+rcc MACH_RCC RCC 1576
+dmp MACH_ARM9 ARM9 1577
+vision_ep9307 MACH_VISION_EP9307 VISION_EP9307 1578
+scly1000 MACH_SCLY1000 SCLY1000 1579
+fontel_ep MACH_FONTEL_EP FONTEL_EP 1580
+voiceblue3g MACH_VOICEBLUE3G VOICEBLUE3G 1581
+tt9200 MACH_TT9200 TT9200 1582
+digi2410 MACH_DIGI2410 DIGI2410 1583
+terastation_pro2 MACH_TERASTATION_PRO2 TERASTATION_PRO2 1584
+linkstation_pro MACH_LINKSTATION_PRO LINKSTATION_PRO 1585
+motorola_a780 MACH_MOTOROLA_A780 MOTOROLA_A780 1587
+motorola_e6 MACH_MOTOROLA_E6 MOTOROLA_E6 1588
+motorola_e2 MACH_MOTOROLA_E2 MOTOROLA_E2 1589
+motorola_e680 MACH_MOTOROLA_E680 MOTOROLA_E680 1590
+ur2410 MACH_UR2410 UR2410 1591
+tas9261 MACH_TAS9261 TAS9261 1592
+davinci_hermes_hd MACH_HERMES_HD HERMES_HD 1593
+davinci_perseo_hd MACH_PERSEO_HD PERSEO_HD 1594
+stargazer2 MACH_STARGAZER2 STARGAZER2 1595
+e350 MACH_E350 E350 1596
+wpcm450 MACH_WPCM450 WPCM450 1597
+cartesio MACH_CARTESIO CARTESIO 1598
+toybox MACH_TOYBOX TOYBOX 1599
+tx27 MACH_TX27 TX27 1600
+ts409 MACH_TS409 TS409 1601
+p300 MACH_P300 P300 1602
+xdacomet MACH_XDACOMET XDACOMET 1603
+dexflex2 MACH_DEXFLEX2 DEXFLEX2 1604
+ow MACH_OW OW 1605
+armebs3 MACH_ARMEBS3 ARMEBS3 1606
+u3 MACH_U3 U3 1607
+smdk2450 MACH_SMDK2450 SMDK2450 1608
+rsi_ews MACH_RSI_EWS RSI_EWS 1609
+tnb MACH_TNB TNB 1610
+toepath MACH_TOEPATH TOEPATH 1611
+kb9263 MACH_KB9263 KB9263 1612
+mt7108 MACH_MT7108 MT7108 1613
+smtr2440 MACH_SMTR2440 SMTR2440 1614
+manao MACH_MANAO MANAO 1615
diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h
index 791d023..c85860b 100644
--- a/arch/arm/vfp/vfp.h
+++ b/arch/arm/vfp/vfp.h
@@ -265,7 +265,11 @@
* which returns (double)0.0. This is useful for the compare with
* zero instructions.
*/
+#ifdef CONFIG_VFPv3
+#define VFP_REG_ZERO 32
+#else
#define VFP_REG_ZERO 16
+#endif
extern u64 vfp_get_double(unsigned int reg);
extern void vfp_put_double(u64 val, unsigned int reg);
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 0ac022f..353f9e5 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -99,12 +99,12 @@
DBGSTR1 "save old state %p", r4
cmp r4, #0
beq no_old_VFP_process
+ VFPFSTMIA r4, r5 @ save the working registers
VFPFMRX r5, FPSCR @ current status
- VFPFMRX r6, FPINST @ FPINST (always there, rev0 onwards)
- tst r1, #FPEXC_FPV2 @ is there an FPINST2 to read?
- VFPFMRX r8, FPINST2, NE @ FPINST2 if needed - avoids reading
- @ nonexistant reg on rev0
- VFPFSTMIA r4 @ save the working registers
+ tst r1, #FPEXC_EX @ is there additional state to save?
+ VFPFMRX r6, FPINST, NE @ FPINST (only if FPEXC.EX is set)
+ tstne r1, #FPEXC_FP2V @ is there an FPINST2 to read?
+ VFPFMRX r8, FPINST2, NE @ FPINST2 if needed (and present)
stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2
@ and point r4 at the word at the
@ start of the register dump
@@ -114,13 +114,13 @@
DBGSTR1 "load state %p", r10
str r10, [r3, r11, lsl #2] @ update the last_VFP_context pointer
@ Load the saved state back into the VFP
- VFPFLDMIA r10 @ reload the working registers while
+ VFPFLDMIA r10, r5 @ reload the working registers while
@ FPEXC is in a safe state
ldmia r10, {r1, r5, r6, r8} @ load FPEXC, FPSCR, FPINST, FPINST2
- tst r1, #FPEXC_FPV2 @ is there an FPINST2 to write?
- VFPFMXR FPINST2, r8, NE @ FPINST2 if needed - avoids writing
- @ nonexistant reg on rev0
- VFPFMXR FPINST, r6
+ tst r1, #FPEXC_EX @ is there additional state to restore?
+ VFPFMXR FPINST, r6, NE @ restore FPINST (only if FPEXC.EX is set)
+ tstne r1, #FPEXC_FP2V @ is there an FPINST2 to write?
+ VFPFMXR FPINST2, r8, NE @ FPINST2 if needed (and present)
VFPFMXR FPSCR, r5 @ restore status
check_for_exception:
@@ -136,10 +136,14 @@
look_for_VFP_exceptions:
- tst r1, #FPEXC_EX
+ @ Check for synchronous or asynchronous exception
+ tst r1, #FPEXC_EX | FPEXC_DEX
bne process_exception
+ @ On some implementations of the VFP subarch 1, setting FPSCR.IXE
+ @ causes all the CDP instructions to be bounced synchronously without
+ @ setting the FPEXC.EX bit
VFPFMRX r5, FPSCR
- tst r5, #FPSCR_IXE @ IXE doesn't set FPEXC_EX !
+ tst r5, #FPSCR_IXE
bne process_exception
@ Fall into hand on to next handler - appropriate coproc instr
@@ -150,10 +154,6 @@
process_exception:
DBGSTR "bounce"
- sub r2, r2, #4
- str r2, [sp, #S_PC] @ retry the instruction on exit from
- @ the imprecise exception handling in
- @ the support code
mov r2, sp @ nothing stacked - regdump is at TOS
mov lr, r9 @ setup for a return to the user code.
@@ -161,7 +161,7 @@
@ r0 holds the trigger instruction
@ r1 holds the FPEXC value
@ r2 pointer to register dump
- b VFP9_bounce @ we have handled this - the support
+ b VFP_bounce @ we have handled this - the support
@ code will raise an exception if
@ required. If not, the user code will
@ retry the faulted instruction
@@ -174,12 +174,12 @@
@ r0 - save location
@ r1 - FPEXC
DBGSTR1 "save VFP state %p", r0
+ VFPFSTMIA r0, r2 @ save the working registers
VFPFMRX r2, FPSCR @ current status
- VFPFMRX r3, FPINST @ FPINST (always there, rev0 onwards)
- tst r1, #FPEXC_FPV2 @ is there an FPINST2 to read?
- VFPFMRX r12, FPINST2, NE @ FPINST2 if needed - avoids reading
- @ nonexistant reg on rev0
- VFPFSTMIA r0 @ save the working registers
+ tst r1, #FPEXC_EX @ is there additional state to save?
+ VFPFMRX r3, FPINST, NE @ FPINST (only if FPEXC.EX is set)
+ tstne r1, #FPEXC_FP2V @ is there an FPINST2 to read?
+ VFPFMRX r12, FPINST2, NE @ FPINST2 if needed (and present)
stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2
mov pc, lr
#endif
@@ -217,8 +217,15 @@
fmrrd r0, r1, d\dr
mov pc, lr
.endr
+#ifdef CONFIG_VFPv3
+ @ d16 - d31 registers
+ .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+ mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr
+ mov pc, lr
+ .endr
+#endif
- @ virtual register 16 for compare with zero
+ @ virtual register 16 (or 32 if VFPv3) for compare with zero
mov r0, #0
mov r1, #0
mov pc, lr
@@ -231,3 +238,10 @@
fmdrr d\dr, r0, r1
mov pc, lr
.endr
+#ifdef CONFIG_VFPv3
+ @ d16 - d31 registers
+ .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+ mcrr p11, 3, r1, r2, c\dr @ fmdrr r1, r2, d\dr
+ mov pc, lr
+ .endr
+#endif
diff --git a/arch/arm/vfp/vfpinstr.h b/arch/arm/vfp/vfpinstr.h
index 7f343a4..15b95b5 100644
--- a/arch/arm/vfp/vfpinstr.h
+++ b/arch/arm/vfp/vfpinstr.h
@@ -52,11 +52,11 @@
#define FEXT_TO_IDX(inst) ((inst & 0x000f0000) >> 15 | (inst & (1 << 7)) >> 7)
#define vfp_get_sd(inst) ((inst & 0x0000f000) >> 11 | (inst & (1 << 22)) >> 22)
-#define vfp_get_dd(inst) ((inst & 0x0000f000) >> 12)
+#define vfp_get_dd(inst) ((inst & 0x0000f000) >> 12 | (inst & (1 << 22)) >> 18)
#define vfp_get_sm(inst) ((inst & 0x0000000f) << 1 | (inst & (1 << 5)) >> 5)
-#define vfp_get_dm(inst) ((inst & 0x0000000f))
+#define vfp_get_dm(inst) ((inst & 0x0000000f) | (inst & (1 << 5)) >> 1)
#define vfp_get_sn(inst) ((inst & 0x000f0000) >> 15 | (inst & (1 << 7)) >> 7)
-#define vfp_get_dn(inst) ((inst & 0x000f0000) >> 16)
+#define vfp_get_dn(inst) ((inst & 0x000f0000) >> 16 | (inst & (1 << 7)) >> 3)
#define vfp_single(inst) (((inst) & 0x0000f00) == 0xa00)
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index b4e210d..32455c6 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -125,13 +125,13 @@
send_sig_info(SIGFPE, &info, current);
}
-static void vfp_panic(char *reason)
+static void vfp_panic(char *reason, u32 inst)
{
int i;
printk(KERN_ERR "VFP: Error: %s\n", reason);
printk(KERN_ERR "VFP: EXC 0x%08x SCR 0x%08x INST 0x%08x\n",
- fmrx(FPEXC), fmrx(FPSCR), fmrx(FPINST));
+ fmrx(FPEXC), fmrx(FPSCR), inst);
for (i = 0; i < 32; i += 2)
printk(KERN_ERR "VFP: s%2u: 0x%08x s%2u: 0x%08x\n",
i, vfp_get_float(i), i+1, vfp_get_float(i+1));
@@ -147,19 +147,16 @@
pr_debug("VFP: raising exceptions %08x\n", exceptions);
if (exceptions == VFP_EXCEPTION_ERROR) {
- vfp_panic("unhandled bounce");
+ vfp_panic("unhandled bounce", inst);
vfp_raise_sigfpe(0, regs);
return;
}
/*
- * If any of the status flags are set, update the FPSCR.
+ * Update the FPSCR with the additional exception flags.
* Comparison instructions always return at least one of
* these flags set.
*/
- if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
- fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V);
-
fpscr |= exceptions;
fmxr(FPSCR, fpscr);
@@ -220,35 +217,64 @@
/*
* Package up a bounce condition.
*/
-void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
+void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
{
- u32 fpscr, orig_fpscr, exceptions, inst;
+ u32 fpscr, orig_fpscr, fpsid, exceptions;
pr_debug("VFP: bounce: trigger %08x fpexc %08x\n", trigger, fpexc);
/*
- * Enable access to the VFP so we can handle the bounce.
+ * At this point, FPEXC can have the following configuration:
+ *
+ * EX DEX IXE
+ * 0 1 x - synchronous exception
+ * 1 x 0 - asynchronous exception
+ * 1 x 1 - sychronous on VFP subarch 1 and asynchronous on later
+ * 0 0 1 - synchronous on VFP9 (non-standard subarch 1
+ * implementation), undefined otherwise
+ *
+ * Clear various bits and enable access to the VFP so we can
+ * handle the bounce.
*/
- fmxr(FPEXC, fpexc & ~(FPEXC_EX|FPEXC_FPV2|FPEXC_INV|FPEXC_UFC|FPEXC_OFC|FPEXC_IOC));
+ fmxr(FPEXC, fpexc & ~(FPEXC_EX|FPEXC_DEX|FPEXC_FP2V|FPEXC_VV|FPEXC_TRAP_MASK));
+ fpsid = fmrx(FPSID);
orig_fpscr = fpscr = fmrx(FPSCR);
/*
- * If we are running with inexact exceptions enabled, we need to
- * emulate the trigger instruction. Note that as we're emulating
- * the trigger instruction, we need to increment PC.
+ * Check for the special VFP subarch 1 and FPSCR.IXE bit case
*/
- if (fpscr & FPSCR_IXE) {
- regs->ARM_pc += 4;
+ if ((fpsid & FPSID_ARCH_MASK) == (1 << FPSID_ARCH_BIT)
+ && (fpscr & FPSCR_IXE)) {
+ /*
+ * Synchronous exception, emulate the trigger instruction
+ */
goto emulate;
}
- barrier();
+ if (fpexc & FPEXC_EX) {
+ /*
+ * Asynchronous exception. The instruction is read from FPINST
+ * and the interrupted instruction has to be restarted.
+ */
+ trigger = fmrx(FPINST);
+ regs->ARM_pc -= 4;
+ } else if (!(fpexc & FPEXC_DEX)) {
+ /*
+ * Illegal combination of bits. It can be caused by an
+ * unallocated VFP instruction but with FPSCR.IXE set and not
+ * on VFP subarch 1.
+ */
+ vfp_raise_exceptions(VFP_EXCEPTION_ERROR, trigger, fpscr, regs);
+ return;
+ }
/*
- * Modify fpscr to indicate the number of iterations remaining
+ * Modify fpscr to indicate the number of iterations remaining.
+ * If FPEXC.EX is 0, FPEXC.DEX is 1 and the FPEXC.VV bit indicates
+ * whether FPEXC.VECITR or FPSCR.LEN is used.
*/
- if (fpexc & FPEXC_EX) {
+ if (fpexc & (FPEXC_EX | FPEXC_VV)) {
u32 len;
len = fpexc + (1 << FPEXC_LENGTH_BIT);
@@ -262,15 +288,15 @@
* FPEXC bounce reason, but this appears to be unreliable.
* Emulate the bounced instruction instead.
*/
- inst = fmrx(FPINST);
- exceptions = vfp_emulate_instruction(inst, fpscr, regs);
+ exceptions = vfp_emulate_instruction(trigger, fpscr, regs);
if (exceptions)
- vfp_raise_exceptions(exceptions, inst, orig_fpscr, regs);
+ vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs);
/*
- * If there isn't a second FP instruction, exit now.
+ * If there isn't a second FP instruction, exit now. Note that
+ * the FPEXC.FP2V bit is valid only if FPEXC.EX is 1.
*/
- if (!(fpexc & FPEXC_FPV2))
+ if (fpexc ^ (FPEXC_EX | FPEXC_FP2V))
return;
/*
@@ -279,10 +305,9 @@
*/
barrier();
trigger = fmrx(FPINST2);
- orig_fpscr = fpscr = fmrx(FPSCR);
emulate:
- exceptions = vfp_emulate_instruction(trigger, fpscr, regs);
+ exceptions = vfp_emulate_instruction(trigger, orig_fpscr, regs);
if (exceptions)
vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs);
}
@@ -306,16 +331,9 @@
{
unsigned int vfpsid;
unsigned int cpu_arch = cpu_architecture();
- u32 access = 0;
- if (cpu_arch >= CPU_ARCH_ARMv6) {
- access = get_copro_access();
-
- /*
- * Enable full access to VFP (cp10 and cp11)
- */
- set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11));
- }
+ if (cpu_arch >= CPU_ARCH_ARMv6)
+ vfp_enable(NULL);
/*
* First check that there is a VFP that we can use.
@@ -329,15 +347,9 @@
vfp_vector = vfp_null_entry;
printk(KERN_INFO "VFP support v0.3: ");
- if (VFP_arch) {
+ if (VFP_arch)
printk("not present\n");
-
- /*
- * Restore the copro access register.
- */
- if (cpu_arch >= CPU_ARCH_ARMv6)
- set_copro_access(access);
- } else if (vfpsid & FPSID_NODOUBLE) {
+ else if (vfpsid & FPSID_NODOUBLE) {
printk("no double precision support\n");
} else {
smp_call_function(vfp_enable, NULL, 1, 1);
diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c
index 548a320..4316f5a 100644
--- a/arch/powerpc/sysdev/mv64x60_dev.c
+++ b/arch/powerpc/sysdev/mv64x60_dev.c
@@ -361,12 +361,6 @@
else
pdata.timeout = 1000; /* 1 second */
- prop = of_get_property(np, "retries", NULL);
- if (prop)
- pdata.retries = *prop;
- else
- pdata.retries = 1;
-
pdev = platform_device_alloc(MV64XXX_I2C_CTLR_NAME, id);
if (!pdev)
return -ENOMEM;
diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c
index 2744b8a..90fe904 100644
--- a/arch/ppc/syslib/mv64x60.c
+++ b/arch/ppc/syslib/mv64x60.c
@@ -411,7 +411,6 @@
.freq_m = 8,
.freq_n = 3,
.timeout = 1000, /* Default timeout of 1 second */
- .retries = 1,
};
static struct resource mv64xxx_i2c_resources[] = {
diff --git a/block/as-iosched.c b/block/as-iosched.c
index cb5e53b..b201d16 100644
--- a/block/as-iosched.c
+++ b/block/as-iosched.c
@@ -170,9 +170,11 @@
static void as_trim(struct io_context *ioc)
{
+ spin_lock(&ioc->lock);
if (ioc->aic)
free_as_io_context(ioc->aic);
ioc->aic = NULL;
+ spin_unlock(&ioc->lock);
}
/* Called when the task exits */
@@ -462,7 +464,9 @@
spin_lock_irqsave(q->queue_lock, flags);
if (ad->antic_status == ANTIC_WAIT_REQ
|| ad->antic_status == ANTIC_WAIT_NEXT) {
- struct as_io_context *aic = ad->io_context->aic;
+ struct as_io_context *aic;
+ spin_lock(&ad->io_context->lock);
+ aic = ad->io_context->aic;
ad->antic_status = ANTIC_FINISHED;
kblockd_schedule_work(&ad->antic_work);
@@ -475,6 +479,7 @@
/* process not "saved" by a cooperating request */
ad->exit_no_coop = (7*ad->exit_no_coop + 256)/8;
}
+ spin_unlock(&ad->io_context->lock);
}
spin_unlock_irqrestore(q->queue_lock, flags);
}
@@ -635,9 +640,11 @@
ioc = ad->io_context;
BUG_ON(!ioc);
+ spin_lock(&ioc->lock);
if (rq && ioc == RQ_IOC(rq)) {
/* request from same process */
+ spin_unlock(&ioc->lock);
return 1;
}
@@ -646,20 +653,25 @@
* In this situation status should really be FINISHED,
* however the timer hasn't had the chance to run yet.
*/
+ spin_unlock(&ioc->lock);
return 1;
}
aic = ioc->aic;
- if (!aic)
+ if (!aic) {
+ spin_unlock(&ioc->lock);
return 0;
+ }
if (atomic_read(&aic->nr_queued) > 0) {
/* process has more requests queued */
+ spin_unlock(&ioc->lock);
return 1;
}
if (atomic_read(&aic->nr_dispatched) > 0) {
/* process has more requests dispatched */
+ spin_unlock(&ioc->lock);
return 1;
}
@@ -680,6 +692,7 @@
}
as_update_iohist(ad, aic, rq);
+ spin_unlock(&ioc->lock);
return 1;
}
@@ -688,20 +701,27 @@
if (aic->ttime_samples == 0)
ad->exit_prob = (7*ad->exit_prob + 256)/8;
- if (ad->exit_no_coop > 128)
+ if (ad->exit_no_coop > 128) {
+ spin_unlock(&ioc->lock);
return 1;
+ }
}
if (aic->ttime_samples == 0) {
- if (ad->new_ttime_mean > ad->antic_expire)
+ if (ad->new_ttime_mean > ad->antic_expire) {
+ spin_unlock(&ioc->lock);
return 1;
- if (ad->exit_prob * ad->exit_no_coop > 128*256)
+ }
+ if (ad->exit_prob * ad->exit_no_coop > 128*256) {
+ spin_unlock(&ioc->lock);
return 1;
+ }
} else if (aic->ttime_mean > ad->antic_expire) {
/* the process thinks too much between requests */
+ spin_unlock(&ioc->lock);
return 1;
}
-
+ spin_unlock(&ioc->lock);
return 0;
}
@@ -1255,7 +1275,9 @@
* Don't copy here but swap, because when anext is
* removed below, it must contain the unused context
*/
+ double_spin_lock(&rioc->lock, &nioc->lock, rioc < nioc);
swap_io_context(&rioc, &nioc);
+ double_spin_unlock(&rioc->lock, &nioc->lock, rioc < nioc);
}
}
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 13553e0..f28d1fb 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -26,9 +26,9 @@
static int cfq_slice_idle = HZ / 125;
/*
- * grace period before allowing idle class to get disk access
+ * offset from end of service tree
*/
-#define CFQ_IDLE_GRACE (HZ / 10)
+#define CFQ_IDLE_DELAY (HZ / 5)
/*
* below this threshold, we consider thinktime immediate
@@ -98,8 +98,6 @@
struct cfq_queue *async_cfqq[2][IOPRIO_BE_NR];
struct cfq_queue *async_idle_cfqq;
- struct timer_list idle_class_timer;
-
sector_t last_position;
unsigned long last_end_request;
@@ -199,8 +197,8 @@
static void cfq_dispatch_insert(struct request_queue *, struct request *);
static struct cfq_queue *cfq_get_queue(struct cfq_data *, int,
- struct task_struct *, gfp_t);
-static struct cfq_io_context *cfq_cic_rb_lookup(struct cfq_data *,
+ struct io_context *, gfp_t);
+static struct cfq_io_context *cfq_cic_lookup(struct cfq_data *,
struct io_context *);
static inline struct cfq_queue *cic_to_cfqq(struct cfq_io_context *cic,
@@ -384,12 +382,15 @@
/*
* The below is leftmost cache rbtree addon
*/
-static struct rb_node *cfq_rb_first(struct cfq_rb_root *root)
+static struct cfq_queue *cfq_rb_first(struct cfq_rb_root *root)
{
if (!root->left)
root->left = rb_first(&root->rb);
- return root->left;
+ if (root->left)
+ return rb_entry(root->left, struct cfq_queue, rb_node);
+
+ return NULL;
}
static void cfq_rb_erase(struct rb_node *n, struct cfq_rb_root *root)
@@ -446,12 +447,20 @@
static void cfq_service_tree_add(struct cfq_data *cfqd,
struct cfq_queue *cfqq, int add_front)
{
- struct rb_node **p = &cfqd->service_tree.rb.rb_node;
- struct rb_node *parent = NULL;
+ struct rb_node **p, *parent;
+ struct cfq_queue *__cfqq;
unsigned long rb_key;
int left;
- if (!add_front) {
+ if (cfq_class_idle(cfqq)) {
+ rb_key = CFQ_IDLE_DELAY;
+ parent = rb_last(&cfqd->service_tree.rb);
+ if (parent && parent != &cfqq->rb_node) {
+ __cfqq = rb_entry(parent, struct cfq_queue, rb_node);
+ rb_key += __cfqq->rb_key;
+ } else
+ rb_key += jiffies;
+ } else if (!add_front) {
rb_key = cfq_slice_offset(cfqd, cfqq) + jiffies;
rb_key += cfqq->slice_resid;
cfqq->slice_resid = 0;
@@ -469,8 +478,9 @@
}
left = 1;
+ parent = NULL;
+ p = &cfqd->service_tree.rb.rb_node;
while (*p) {
- struct cfq_queue *__cfqq;
struct rb_node **n;
parent = *p;
@@ -524,8 +534,7 @@
* add to busy list of queues for service, trying to be fair in ordering
* the pending list according to last request service
*/
-static inline void
-cfq_add_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+static void cfq_add_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq)
{
BUG_ON(cfq_cfqq_on_rr(cfqq));
cfq_mark_cfqq_on_rr(cfqq);
@@ -538,8 +547,7 @@
* Called when the cfqq no longer has requests pending, remove it from
* the service tree.
*/
-static inline void
-cfq_del_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+static void cfq_del_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq)
{
BUG_ON(!cfq_cfqq_on_rr(cfqq));
cfq_clear_cfqq_on_rr(cfqq);
@@ -554,7 +562,7 @@
/*
* rb tree support functions
*/
-static inline void cfq_del_rq_rb(struct request *rq)
+static void cfq_del_rq_rb(struct request *rq)
{
struct cfq_queue *cfqq = RQ_CFQQ(rq);
struct cfq_data *cfqd = cfqq->cfqd;
@@ -594,8 +602,7 @@
BUG_ON(!cfqq->next_rq);
}
-static inline void
-cfq_reposition_rq_rb(struct cfq_queue *cfqq, struct request *rq)
+static void cfq_reposition_rq_rb(struct cfq_queue *cfqq, struct request *rq)
{
elv_rb_del(&cfqq->sort_list, rq);
cfqq->queued[rq_is_sync(rq)]--;
@@ -609,7 +616,7 @@
struct cfq_io_context *cic;
struct cfq_queue *cfqq;
- cic = cfq_cic_rb_lookup(cfqd, tsk->io_context);
+ cic = cfq_cic_lookup(cfqd, tsk->io_context);
if (!cic)
return NULL;
@@ -721,7 +728,7 @@
* Lookup the cfqq that this bio will be queued with. Allow
* merge only if rq is queued there.
*/
- cic = cfq_cic_rb_lookup(cfqd, current->io_context);
+ cic = cfq_cic_lookup(cfqd, current->io_context);
if (!cic)
return 0;
@@ -732,15 +739,10 @@
return 0;
}
-static inline void
-__cfq_set_active_queue(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+static void __cfq_set_active_queue(struct cfq_data *cfqd,
+ struct cfq_queue *cfqq)
{
if (cfqq) {
- /*
- * stop potential idle class queues waiting service
- */
- del_timer(&cfqd->idle_class_timer);
-
cfqq->slice_end = 0;
cfq_clear_cfqq_must_alloc_slice(cfqq);
cfq_clear_cfqq_fifo_expire(cfqq);
@@ -789,47 +791,16 @@
__cfq_slice_expired(cfqd, cfqq, timed_out);
}
-static int start_idle_class_timer(struct cfq_data *cfqd)
-{
- unsigned long end = cfqd->last_end_request + CFQ_IDLE_GRACE;
- unsigned long now = jiffies;
-
- if (time_before(now, end) &&
- time_after_eq(now, cfqd->last_end_request)) {
- mod_timer(&cfqd->idle_class_timer, end);
- return 1;
- }
-
- return 0;
-}
-
/*
* Get next queue for service. Unless we have a queue preemption,
* we'll simply select the first cfqq in the service tree.
*/
static struct cfq_queue *cfq_get_next_queue(struct cfq_data *cfqd)
{
- struct cfq_queue *cfqq;
- struct rb_node *n;
-
if (RB_EMPTY_ROOT(&cfqd->service_tree.rb))
return NULL;
- n = cfq_rb_first(&cfqd->service_tree);
- cfqq = rb_entry(n, struct cfq_queue, rb_node);
-
- if (cfq_class_idle(cfqq)) {
- /*
- * if we have idle queues and no rt or be queues had
- * pending requests, either allow immediate service if
- * the grace period has passed or arm the idle grace
- * timer
- */
- if (start_idle_class_timer(cfqd))
- cfqq = NULL;
- }
-
- return cfqq;
+ return cfq_rb_first(&cfqd->service_tree);
}
/*
@@ -895,7 +866,7 @@
* task has exited, don't wait
*/
cic = cfqd->active_cic;
- if (!cic || !cic->ioc->task)
+ if (!cic || !atomic_read(&cic->ioc->nr_tasks))
return;
/*
@@ -939,7 +910,7 @@
/*
* return expired entry, or NULL to just start from scratch in rbtree
*/
-static inline struct request *cfq_check_fifo(struct cfq_queue *cfqq)
+static struct request *cfq_check_fifo(struct cfq_queue *cfqq)
{
struct cfq_data *cfqd = cfqq->cfqd;
struct request *rq;
@@ -1068,7 +1039,7 @@
return dispatched;
}
-static inline int __cfq_forced_dispatch_cfqq(struct cfq_queue *cfqq)
+static int __cfq_forced_dispatch_cfqq(struct cfq_queue *cfqq)
{
int dispatched = 0;
@@ -1087,14 +1058,11 @@
*/
static int cfq_forced_dispatch(struct cfq_data *cfqd)
{
+ struct cfq_queue *cfqq;
int dispatched = 0;
- struct rb_node *n;
- while ((n = cfq_rb_first(&cfqd->service_tree)) != NULL) {
- struct cfq_queue *cfqq = rb_entry(n, struct cfq_queue, rb_node);
-
+ while ((cfqq = cfq_rb_first(&cfqd->service_tree)) != NULL)
dispatched += __cfq_forced_dispatch_cfqq(cfqq);
- }
cfq_slice_expired(cfqd, 0);
@@ -1170,20 +1138,69 @@
kmem_cache_free(cfq_pool, cfqq);
}
+/*
+ * Call func for each cic attached to this ioc. Returns number of cic's seen.
+ */
+#define CIC_GANG_NR 16
+static unsigned int
+call_for_each_cic(struct io_context *ioc,
+ void (*func)(struct io_context *, struct cfq_io_context *))
+{
+ struct cfq_io_context *cics[CIC_GANG_NR];
+ unsigned long index = 0;
+ unsigned int called = 0;
+ int nr;
+
+ rcu_read_lock();
+
+ do {
+ int i;
+
+ /*
+ * Perhaps there's a better way - this just gang lookups from
+ * 0 to the end, restarting after each CIC_GANG_NR from the
+ * last key + 1.
+ */
+ nr = radix_tree_gang_lookup(&ioc->radix_root, (void **) cics,
+ index, CIC_GANG_NR);
+ if (!nr)
+ break;
+
+ called += nr;
+ index = 1 + (unsigned long) cics[nr - 1]->key;
+
+ for (i = 0; i < nr; i++)
+ func(ioc, cics[i]);
+ } while (nr == CIC_GANG_NR);
+
+ rcu_read_unlock();
+
+ return called;
+}
+
+static void cic_free_func(struct io_context *ioc, struct cfq_io_context *cic)
+{
+ unsigned long flags;
+
+ BUG_ON(!cic->dead_key);
+
+ spin_lock_irqsave(&ioc->lock, flags);
+ radix_tree_delete(&ioc->radix_root, cic->dead_key);
+ spin_unlock_irqrestore(&ioc->lock, flags);
+
+ kmem_cache_free(cfq_ioc_pool, cic);
+}
+
static void cfq_free_io_context(struct io_context *ioc)
{
- struct cfq_io_context *__cic;
- struct rb_node *n;
- int freed = 0;
+ int freed;
- ioc->ioc_data = NULL;
-
- while ((n = rb_first(&ioc->cic_root)) != NULL) {
- __cic = rb_entry(n, struct cfq_io_context, rb_node);
- rb_erase(&__cic->rb_node, &ioc->cic_root);
- kmem_cache_free(cfq_ioc_pool, __cic);
- freed++;
- }
+ /*
+ * ioc->refcount is zero here, so no more cic's are allowed to be
+ * linked into this ioc. So it should be ok to iterate over the known
+ * list, we will see all cic's since no new ones are added.
+ */
+ freed = call_for_each_cic(ioc, cic_free_func);
elv_ioc_count_mod(ioc_count, -freed);
@@ -1205,7 +1222,12 @@
struct cfq_io_context *cic)
{
list_del_init(&cic->queue_list);
+
+ /*
+ * Make sure key == NULL is seen for dead queues
+ */
smp_wmb();
+ cic->dead_key = (unsigned long) cic->key;
cic->key = NULL;
if (cic->cfqq[ASYNC]) {
@@ -1219,16 +1241,18 @@
}
}
-static void cfq_exit_single_io_context(struct cfq_io_context *cic)
+static void cfq_exit_single_io_context(struct io_context *ioc,
+ struct cfq_io_context *cic)
{
struct cfq_data *cfqd = cic->key;
if (cfqd) {
struct request_queue *q = cfqd->queue;
+ unsigned long flags;
- spin_lock_irq(q->queue_lock);
+ spin_lock_irqsave(q->queue_lock, flags);
__cfq_exit_single_io_context(cfqd, cic);
- spin_unlock_irq(q->queue_lock);
+ spin_unlock_irqrestore(q->queue_lock, flags);
}
}
@@ -1238,21 +1262,8 @@
*/
static void cfq_exit_io_context(struct io_context *ioc)
{
- struct cfq_io_context *__cic;
- struct rb_node *n;
-
- ioc->ioc_data = NULL;
-
- /*
- * put the reference this task is holding to the various queues
- */
- n = rb_first(&ioc->cic_root);
- while (n != NULL) {
- __cic = rb_entry(n, struct cfq_io_context, rb_node);
-
- cfq_exit_single_io_context(__cic);
- n = rb_next(n);
- }
+ rcu_assign_pointer(ioc->ioc_data, NULL);
+ call_for_each_cic(ioc, cfq_exit_single_io_context);
}
static struct cfq_io_context *
@@ -1273,7 +1284,7 @@
return cic;
}
-static void cfq_init_prio_data(struct cfq_queue *cfqq)
+static void cfq_init_prio_data(struct cfq_queue *cfqq, struct io_context *ioc)
{
struct task_struct *tsk = current;
int ioprio_class;
@@ -1281,7 +1292,7 @@
if (!cfq_cfqq_prio_changed(cfqq))
return;
- ioprio_class = IOPRIO_PRIO_CLASS(tsk->ioprio);
+ ioprio_class = IOPRIO_PRIO_CLASS(ioc->ioprio);
switch (ioprio_class) {
default:
printk(KERN_ERR "cfq: bad prio %x\n", ioprio_class);
@@ -1293,11 +1304,11 @@
cfqq->ioprio_class = IOPRIO_CLASS_BE;
break;
case IOPRIO_CLASS_RT:
- cfqq->ioprio = task_ioprio(tsk);
+ cfqq->ioprio = task_ioprio(ioc);
cfqq->ioprio_class = IOPRIO_CLASS_RT;
break;
case IOPRIO_CLASS_BE:
- cfqq->ioprio = task_ioprio(tsk);
+ cfqq->ioprio = task_ioprio(ioc);
cfqq->ioprio_class = IOPRIO_CLASS_BE;
break;
case IOPRIO_CLASS_IDLE:
@@ -1316,7 +1327,7 @@
cfq_clear_cfqq_prio_changed(cfqq);
}
-static inline void changed_ioprio(struct cfq_io_context *cic)
+static void changed_ioprio(struct io_context *ioc, struct cfq_io_context *cic)
{
struct cfq_data *cfqd = cic->key;
struct cfq_queue *cfqq;
@@ -1330,8 +1341,7 @@
cfqq = cic->cfqq[ASYNC];
if (cfqq) {
struct cfq_queue *new_cfqq;
- new_cfqq = cfq_get_queue(cfqd, ASYNC, cic->ioc->task,
- GFP_ATOMIC);
+ new_cfqq = cfq_get_queue(cfqd, ASYNC, cic->ioc, GFP_ATOMIC);
if (new_cfqq) {
cic->cfqq[ASYNC] = new_cfqq;
cfq_put_queue(cfqq);
@@ -1347,29 +1357,19 @@
static void cfq_ioc_set_ioprio(struct io_context *ioc)
{
- struct cfq_io_context *cic;
- struct rb_node *n;
-
+ call_for_each_cic(ioc, changed_ioprio);
ioc->ioprio_changed = 0;
-
- n = rb_first(&ioc->cic_root);
- while (n != NULL) {
- cic = rb_entry(n, struct cfq_io_context, rb_node);
-
- changed_ioprio(cic);
- n = rb_next(n);
- }
}
static struct cfq_queue *
cfq_find_alloc_queue(struct cfq_data *cfqd, int is_sync,
- struct task_struct *tsk, gfp_t gfp_mask)
+ struct io_context *ioc, gfp_t gfp_mask)
{
struct cfq_queue *cfqq, *new_cfqq = NULL;
struct cfq_io_context *cic;
retry:
- cic = cfq_cic_rb_lookup(cfqd, tsk->io_context);
+ cic = cfq_cic_lookup(cfqd, ioc);
/* cic always exists here */
cfqq = cic_to_cfqq(cic, is_sync);
@@ -1404,15 +1404,16 @@
atomic_set(&cfqq->ref, 0);
cfqq->cfqd = cfqd;
- if (is_sync) {
- cfq_mark_cfqq_idle_window(cfqq);
- cfq_mark_cfqq_sync(cfqq);
- }
-
cfq_mark_cfqq_prio_changed(cfqq);
cfq_mark_cfqq_queue_new(cfqq);
- cfq_init_prio_data(cfqq);
+ cfq_init_prio_data(cfqq, ioc);
+
+ if (is_sync) {
+ if (!cfq_class_idle(cfqq))
+ cfq_mark_cfqq_idle_window(cfqq);
+ cfq_mark_cfqq_sync(cfqq);
+ }
}
if (new_cfqq)
@@ -1439,11 +1440,11 @@
}
static struct cfq_queue *
-cfq_get_queue(struct cfq_data *cfqd, int is_sync, struct task_struct *tsk,
+cfq_get_queue(struct cfq_data *cfqd, int is_sync, struct io_context *ioc,
gfp_t gfp_mask)
{
- const int ioprio = task_ioprio(tsk);
- const int ioprio_class = task_ioprio_class(tsk);
+ const int ioprio = task_ioprio(ioc);
+ const int ioprio_class = task_ioprio_class(ioc);
struct cfq_queue **async_cfqq = NULL;
struct cfq_queue *cfqq = NULL;
@@ -1453,7 +1454,7 @@
}
if (!cfqq) {
- cfqq = cfq_find_alloc_queue(cfqd, is_sync, tsk, gfp_mask);
+ cfqq = cfq_find_alloc_queue(cfqd, is_sync, ioc, gfp_mask);
if (!cfqq)
return NULL;
}
@@ -1470,28 +1471,42 @@
return cfqq;
}
+static void cfq_cic_free(struct cfq_io_context *cic)
+{
+ kmem_cache_free(cfq_ioc_pool, cic);
+ elv_ioc_count_dec(ioc_count);
+
+ if (ioc_gone && !elv_ioc_count_read(ioc_count))
+ complete(ioc_gone);
+}
+
/*
* We drop cfq io contexts lazily, so we may find a dead one.
*/
static void
-cfq_drop_dead_cic(struct io_context *ioc, struct cfq_io_context *cic)
+cfq_drop_dead_cic(struct cfq_data *cfqd, struct io_context *ioc,
+ struct cfq_io_context *cic)
{
+ unsigned long flags;
+
WARN_ON(!list_empty(&cic->queue_list));
- if (ioc->ioc_data == cic)
- ioc->ioc_data = NULL;
+ spin_lock_irqsave(&ioc->lock, flags);
- rb_erase(&cic->rb_node, &ioc->cic_root);
- kmem_cache_free(cfq_ioc_pool, cic);
- elv_ioc_count_dec(ioc_count);
+ if (ioc->ioc_data == cic)
+ rcu_assign_pointer(ioc->ioc_data, NULL);
+
+ radix_tree_delete(&ioc->radix_root, (unsigned long) cfqd);
+ spin_unlock_irqrestore(&ioc->lock, flags);
+
+ cfq_cic_free(cic);
}
static struct cfq_io_context *
-cfq_cic_rb_lookup(struct cfq_data *cfqd, struct io_context *ioc)
+cfq_cic_lookup(struct cfq_data *cfqd, struct io_context *ioc)
{
- struct rb_node *n;
struct cfq_io_context *cic;
- void *k, *key = cfqd;
+ void *k;
if (unlikely(!ioc))
return NULL;
@@ -1499,74 +1514,64 @@
/*
* we maintain a last-hit cache, to avoid browsing over the tree
*/
- cic = ioc->ioc_data;
+ cic = rcu_dereference(ioc->ioc_data);
if (cic && cic->key == cfqd)
return cic;
-restart:
- n = ioc->cic_root.rb_node;
- while (n) {
- cic = rb_entry(n, struct cfq_io_context, rb_node);
+ do {
+ rcu_read_lock();
+ cic = radix_tree_lookup(&ioc->radix_root, (unsigned long) cfqd);
+ rcu_read_unlock();
+ if (!cic)
+ break;
/* ->key must be copied to avoid race with cfq_exit_queue() */
k = cic->key;
if (unlikely(!k)) {
- cfq_drop_dead_cic(ioc, cic);
- goto restart;
+ cfq_drop_dead_cic(cfqd, ioc, cic);
+ continue;
}
- if (key < k)
- n = n->rb_left;
- else if (key > k)
- n = n->rb_right;
- else {
- ioc->ioc_data = cic;
- return cic;
- }
- }
+ rcu_assign_pointer(ioc->ioc_data, cic);
+ break;
+ } while (1);
- return NULL;
+ return cic;
}
-static inline void
-cfq_cic_link(struct cfq_data *cfqd, struct io_context *ioc,
- struct cfq_io_context *cic)
+/*
+ * Add cic into ioc, using cfqd as the search key. This enables us to lookup
+ * the process specific cfq io context when entered from the block layer.
+ * Also adds the cic to a per-cfqd list, used when this queue is removed.
+ */
+static int cfq_cic_link(struct cfq_data *cfqd, struct io_context *ioc,
+ struct cfq_io_context *cic, gfp_t gfp_mask)
{
- struct rb_node **p;
- struct rb_node *parent;
- struct cfq_io_context *__cic;
unsigned long flags;
- void *k;
+ int ret;
- cic->ioc = ioc;
- cic->key = cfqd;
+ ret = radix_tree_preload(gfp_mask);
+ if (!ret) {
+ cic->ioc = ioc;
+ cic->key = cfqd;
-restart:
- parent = NULL;
- p = &ioc->cic_root.rb_node;
- while (*p) {
- parent = *p;
- __cic = rb_entry(parent, struct cfq_io_context, rb_node);
- /* ->key must be copied to avoid race with cfq_exit_queue() */
- k = __cic->key;
- if (unlikely(!k)) {
- cfq_drop_dead_cic(ioc, __cic);
- goto restart;
+ spin_lock_irqsave(&ioc->lock, flags);
+ ret = radix_tree_insert(&ioc->radix_root,
+ (unsigned long) cfqd, cic);
+ spin_unlock_irqrestore(&ioc->lock, flags);
+
+ radix_tree_preload_end();
+
+ if (!ret) {
+ spin_lock_irqsave(cfqd->queue->queue_lock, flags);
+ list_add(&cic->queue_list, &cfqd->cic_list);
+ spin_unlock_irqrestore(cfqd->queue->queue_lock, flags);
}
-
- if (cic->key < k)
- p = &(*p)->rb_left;
- else if (cic->key > k)
- p = &(*p)->rb_right;
- else
- BUG();
}
- rb_link_node(&cic->rb_node, parent, p);
- rb_insert_color(&cic->rb_node, &ioc->cic_root);
+ if (ret)
+ printk(KERN_ERR "cfq: cic link failed!\n");
- spin_lock_irqsave(cfqd->queue->queue_lock, flags);
- list_add(&cic->queue_list, &cfqd->cic_list);
- spin_unlock_irqrestore(cfqd->queue->queue_lock, flags);
+ return ret;
}
/*
@@ -1586,7 +1591,7 @@
if (!ioc)
return NULL;
- cic = cfq_cic_rb_lookup(cfqd, ioc);
+ cic = cfq_cic_lookup(cfqd, ioc);
if (cic)
goto out;
@@ -1594,13 +1599,17 @@
if (cic == NULL)
goto err;
- cfq_cic_link(cfqd, ioc, cic);
+ if (cfq_cic_link(cfqd, ioc, cic, gfp_mask))
+ goto err_free;
+
out:
smp_read_barrier_depends();
if (unlikely(ioc->ioprio_changed))
cfq_ioc_set_ioprio(ioc);
return cic;
+err_free:
+ cfq_cic_free(cic);
err:
put_io_context(ioc);
return NULL;
@@ -1655,12 +1664,15 @@
{
int enable_idle;
- if (!cfq_cfqq_sync(cfqq))
+ /*
+ * Don't idle for async or idle io prio class
+ */
+ if (!cfq_cfqq_sync(cfqq) || cfq_class_idle(cfqq))
return;
enable_idle = cfq_cfqq_idle_window(cfqq);
- if (!cic->ioc->task || !cfqd->cfq_slice_idle ||
+ if (!atomic_read(&cic->ioc->nr_tasks) || !cfqd->cfq_slice_idle ||
(cfqd->hw_tag && CIC_SEEKY(cic)))
enable_idle = 0;
else if (sample_valid(cic->ttime_samples)) {
@@ -1793,7 +1805,7 @@
struct cfq_data *cfqd = q->elevator->elevator_data;
struct cfq_queue *cfqq = RQ_CFQQ(rq);
- cfq_init_prio_data(cfqq);
+ cfq_init_prio_data(cfqq, RQ_CIC(rq)->ioc);
cfq_add_rq_rb(rq);
@@ -1834,7 +1846,7 @@
cfq_set_prio_slice(cfqd, cfqq);
cfq_clear_cfqq_slice_new(cfqq);
}
- if (cfq_slice_used(cfqq))
+ if (cfq_slice_used(cfqq) || cfq_class_idle(cfqq))
cfq_slice_expired(cfqd, 1);
else if (sync && RB_EMPTY_ROOT(&cfqq->sort_list))
cfq_arm_slice_timer(cfqd);
@@ -1894,13 +1906,13 @@
* so just lookup a possibly existing queue, or return 'may queue'
* if that fails
*/
- cic = cfq_cic_rb_lookup(cfqd, tsk->io_context);
+ cic = cfq_cic_lookup(cfqd, tsk->io_context);
if (!cic)
return ELV_MQUEUE_MAY;
cfqq = cic_to_cfqq(cic, rw & REQ_RW_SYNC);
if (cfqq) {
- cfq_init_prio_data(cfqq);
+ cfq_init_prio_data(cfqq, cic->ioc);
cfq_prio_boost(cfqq);
return __cfq_may_queue(cfqq);
@@ -1938,7 +1950,6 @@
cfq_set_request(struct request_queue *q, struct request *rq, gfp_t gfp_mask)
{
struct cfq_data *cfqd = q->elevator->elevator_data;
- struct task_struct *tsk = current;
struct cfq_io_context *cic;
const int rw = rq_data_dir(rq);
const int is_sync = rq_is_sync(rq);
@@ -1956,7 +1967,7 @@
cfqq = cic_to_cfqq(cic, is_sync);
if (!cfqq) {
- cfqq = cfq_get_queue(cfqd, is_sync, tsk, gfp_mask);
+ cfqq = cfq_get_queue(cfqd, is_sync, cic->ioc, gfp_mask);
if (!cfqq)
goto queue_fail;
@@ -2039,29 +2050,9 @@
spin_unlock_irqrestore(cfqd->queue->queue_lock, flags);
}
-/*
- * Timer running if an idle class queue is waiting for service
- */
-static void cfq_idle_class_timer(unsigned long data)
-{
- struct cfq_data *cfqd = (struct cfq_data *) data;
- unsigned long flags;
-
- spin_lock_irqsave(cfqd->queue->queue_lock, flags);
-
- /*
- * race with a non-idle queue, reset timer
- */
- if (!start_idle_class_timer(cfqd))
- cfq_schedule_dispatch(cfqd);
-
- spin_unlock_irqrestore(cfqd->queue->queue_lock, flags);
-}
-
static void cfq_shutdown_timer_wq(struct cfq_data *cfqd)
{
del_timer_sync(&cfqd->idle_slice_timer);
- del_timer_sync(&cfqd->idle_class_timer);
kblockd_flush_work(&cfqd->unplug_work);
}
@@ -2126,10 +2117,6 @@
cfqd->idle_slice_timer.function = cfq_idle_slice_timer;
cfqd->idle_slice_timer.data = (unsigned long) cfqd;
- init_timer(&cfqd->idle_class_timer);
- cfqd->idle_class_timer.function = cfq_idle_class_timer;
- cfqd->idle_class_timer.data = (unsigned long) cfqd;
-
INIT_WORK(&cfqd->unplug_work, cfq_kick_queue);
cfqd->last_end_request = jiffies;
@@ -2160,7 +2147,7 @@
if (!cfq_pool)
goto fail;
- cfq_ioc_pool = KMEM_CACHE(cfq_io_context, 0);
+ cfq_ioc_pool = KMEM_CACHE(cfq_io_context, SLAB_DESTROY_BY_RCU);
if (!cfq_ioc_pool)
goto fail;
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index 3d0422f..b901db6 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -3853,55 +3853,100 @@
return 0;
}
+static void cfq_dtor(struct io_context *ioc)
+{
+ struct cfq_io_context *cic[1];
+ int r;
+
+ /*
+ * We don't have a specific key to lookup with, so use the gang
+ * lookup to just retrieve the first item stored. The cfq exit
+ * function will iterate the full tree, so any member will do.
+ */
+ r = radix_tree_gang_lookup(&ioc->radix_root, (void **) cic, 0, 1);
+ if (r > 0)
+ cic[0]->dtor(ioc);
+}
+
/*
- * IO Context helper functions
+ * IO Context helper functions. put_io_context() returns 1 if there are no
+ * more users of this io context, 0 otherwise.
*/
-void put_io_context(struct io_context *ioc)
+int put_io_context(struct io_context *ioc)
{
if (ioc == NULL)
- return;
+ return 1;
BUG_ON(atomic_read(&ioc->refcount) == 0);
if (atomic_dec_and_test(&ioc->refcount)) {
- struct cfq_io_context *cic;
-
rcu_read_lock();
if (ioc->aic && ioc->aic->dtor)
ioc->aic->dtor(ioc->aic);
- if (ioc->cic_root.rb_node != NULL) {
- struct rb_node *n = rb_first(&ioc->cic_root);
-
- cic = rb_entry(n, struct cfq_io_context, rb_node);
- cic->dtor(ioc);
- }
rcu_read_unlock();
+ cfq_dtor(ioc);
kmem_cache_free(iocontext_cachep, ioc);
+ return 1;
}
+ return 0;
}
EXPORT_SYMBOL(put_io_context);
+static void cfq_exit(struct io_context *ioc)
+{
+ struct cfq_io_context *cic[1];
+ int r;
+
+ rcu_read_lock();
+ /*
+ * See comment for cfq_dtor()
+ */
+ r = radix_tree_gang_lookup(&ioc->radix_root, (void **) cic, 0, 1);
+ rcu_read_unlock();
+
+ if (r > 0)
+ cic[0]->exit(ioc);
+}
+
/* Called by the exitting task */
void exit_io_context(void)
{
struct io_context *ioc;
- struct cfq_io_context *cic;
task_lock(current);
ioc = current->io_context;
current->io_context = NULL;
task_unlock(current);
- ioc->task = NULL;
- if (ioc->aic && ioc->aic->exit)
- ioc->aic->exit(ioc->aic);
- if (ioc->cic_root.rb_node != NULL) {
- cic = rb_entry(rb_first(&ioc->cic_root), struct cfq_io_context, rb_node);
- cic->exit(ioc);
+ if (atomic_dec_and_test(&ioc->nr_tasks)) {
+ if (ioc->aic && ioc->aic->exit)
+ ioc->aic->exit(ioc->aic);
+ cfq_exit(ioc);
+
+ put_io_context(ioc);
+ }
+}
+
+struct io_context *alloc_io_context(gfp_t gfp_flags, int node)
+{
+ struct io_context *ret;
+
+ ret = kmem_cache_alloc_node(iocontext_cachep, gfp_flags, node);
+ if (ret) {
+ atomic_set(&ret->refcount, 1);
+ atomic_set(&ret->nr_tasks, 1);
+ spin_lock_init(&ret->lock);
+ ret->ioprio_changed = 0;
+ ret->ioprio = 0;
+ ret->last_waited = jiffies; /* doesn't matter... */
+ ret->nr_batch_requests = 0; /* because this is 0 */
+ ret->aic = NULL;
+ INIT_RADIX_TREE(&ret->radix_root, GFP_ATOMIC | __GFP_HIGH);
+ ret->ioc_data = NULL;
}
- put_io_context(ioc);
+ return ret;
}
/*
@@ -3921,16 +3966,8 @@
if (likely(ret))
return ret;
- ret = kmem_cache_alloc_node(iocontext_cachep, gfp_flags, node);
+ ret = alloc_io_context(gfp_flags, node);
if (ret) {
- atomic_set(&ret->refcount, 1);
- ret->task = current;
- ret->ioprio_changed = 0;
- ret->last_waited = jiffies; /* doesn't matter... */
- ret->nr_batch_requests = 0; /* because this is 0 */
- ret->aic = NULL;
- ret->cic_root.rb_node = NULL;
- ret->ioc_data = NULL;
/* make sure set_task_ioprio() sees the settings above */
smp_wmb();
tsk->io_context = ret;
@@ -3947,10 +3984,18 @@
*/
struct io_context *get_io_context(gfp_t gfp_flags, int node)
{
- struct io_context *ret;
- ret = current_io_context(gfp_flags, node);
- if (likely(ret))
- atomic_inc(&ret->refcount);
+ struct io_context *ret = NULL;
+
+ /*
+ * Check for unlikely race with exiting task. ioc ref count is
+ * zero when ioc is being detached.
+ */
+ do {
+ ret = current_io_context(gfp_flags, node);
+ if (unlikely(!ret))
+ break;
+ } while (!atomic_inc_not_zero(&ret->refcount));
+
return ret;
}
EXPORT_SYMBOL(get_io_context);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index ce803d1..bdbd55a 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4924,7 +4924,7 @@
* @dev: device to target
* @buf: data buffer
* @buflen: buffer length
- * @write_data: read/write
+ * @rw: read/write
*
* Transfer data from/to the device data register by PIO.
*
@@ -4970,7 +4970,7 @@
* @dev: device to target
* @buf: data buffer
* @buflen: buffer length
- * @write_data: read/write
+ * @rw: read/write
*
* Transfer data from/to the device data register by PIO. Do the
* transfer with interrupts disabled.
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 8d12b26..b61f56b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -643,7 +643,7 @@
config I2C_MV64XXX
tristate "Marvell mv64xxx I2C Controller"
- depends on MV64X60 && EXPERIMENTAL
+ depends on (MV64X60 || ARCH_ORION) && EXPERIMENTAL
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Marvell 64xxx line of host bridges.
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index bb7bf68..036e6a8 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -1,6 +1,6 @@
/*
- * Driver for the i2c controller on the Marvell line of host bridges for MIPS
- * and PPC (e.g, gt642[46]0, mv643[46]0, mv644[46]0).
+ * Driver for the i2c controller on the Marvell line of host bridges
+ * (e.g, gt642[46]0, mv643[46]0, mv644[46]0, and Orion SoC family).
*
* Author: Mark A. Greer <mgreer@mvista.com>
*
@@ -14,7 +14,7 @@
#include <linux/spinlock.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
-#include <linux/mv643xx.h>
+#include <linux/mv643xx_i2c.h>
#include <linux/platform_device.h>
#include <asm/io.h>
@@ -86,6 +86,7 @@
u32 cntl_bits;
void __iomem *reg_base;
u32 reg_base_p;
+ u32 reg_size;
u32 addr1;
u32 addr2;
u32 bytes_left;
@@ -463,17 +464,20 @@
mv64xxx_i2c_map_regs(struct platform_device *pd,
struct mv64xxx_i2c_data *drv_data)
{
- struct resource *r;
+ int size;
+ struct resource *r = platform_get_resource(pd, IORESOURCE_MEM, 0);
- if ((r = platform_get_resource(pd, IORESOURCE_MEM, 0)) &&
- request_mem_region(r->start, MV64XXX_I2C_REG_BLOCK_SIZE,
- drv_data->adapter.name)) {
+ if (!r)
+ return -ENODEV;
- drv_data->reg_base = ioremap(r->start,
- MV64XXX_I2C_REG_BLOCK_SIZE);
- drv_data->reg_base_p = r->start;
- } else
- return -ENOMEM;
+ size = r->end - r->start + 1;
+
+ if (!request_mem_region(r->start, size, drv_data->adapter.name))
+ return -EBUSY;
+
+ drv_data->reg_base = ioremap(r->start, size);
+ drv_data->reg_base_p = r->start;
+ drv_data->reg_size = size;
return 0;
}
@@ -483,8 +487,7 @@
{
if (drv_data->reg_base) {
iounmap(drv_data->reg_base);
- release_mem_region(drv_data->reg_base_p,
- MV64XXX_I2C_REG_BLOCK_SIZE);
+ release_mem_region(drv_data->reg_base_p, drv_data->reg_size);
}
drv_data->reg_base = NULL;
@@ -529,7 +532,6 @@
drv_data->adapter.owner = THIS_MODULE;
drv_data->adapter.class = I2C_CLASS_HWMON;
drv_data->adapter.timeout = pdata->timeout;
- drv_data->adapter.retries = pdata->retries;
drv_data->adapter.nr = pd->id;
platform_set_drvdata(pd, drv_data);
i2c_set_adapdata(&drv_data->adapter, drv_data);
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
index b1b2e07..99d92f5 100644
--- a/drivers/input/touchscreen/corgi_ts.c
+++ b/drivers/input/touchscreen/corgi_ts.c
@@ -74,10 +74,10 @@
static unsigned long calc_waittime(struct corgi_ts *corgi_ts)
{
- unsigned long hsync_len = corgi_ts->machinfo->get_hsync_len();
+ unsigned long hsync_invperiod = corgi_ts->machinfo->get_hsync_invperiod();
- if (hsync_len)
- return get_clk_frequency_khz(0)*1000/hsync_len;
+ if (hsync_invperiod)
+ return get_clk_frequency_khz(0)*1000/hsync_invperiod;
else
return 0;
}
@@ -114,7 +114,7 @@
if (timer2-timer1 > wait_time) {
/* too slow - timeout, try again */
corgi_ts->machinfo->wait_hsync();
- /* get OSCR */
+ /* get CCNT */
CCNT(timer1);
/* Wait after HSync */
CCNT(timer2);
diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c
index b7c8e78..61aeaf7 100644
--- a/drivers/mfd/ucb1x00-assabet.c
+++ b/drivers/mfd/ucb1x00-assabet.c
@@ -20,7 +20,7 @@
#include "ucb1x00.h"
#define UCB1X00_ATTR(name,input)\
-static ssize_t name##_show(struct device *dev, struct device_attribute *attr,
+static ssize_t name##_show(struct device *dev, struct device_attribute *attr, \
char *buf) \
{ \
struct ucb1x00 *ucb = classdev_to_ucb1x00(dev); \
@@ -38,17 +38,17 @@
static int ucb1x00_assabet_add(struct ucb1x00_dev *dev)
{
- device_create_file(&dev->ucb->dev, &device_attr_vbatt);
- device_create_file(&dev->ucb->dev, &device_attr_vcharger);
- device_create_file(&dev->ucb->dev, &device_attr_batt_temp);
+ device_create_file(&dev->ucb->dev, &dev_attr_vbatt);
+ device_create_file(&dev->ucb->dev, &dev_attr_vcharger);
+ device_create_file(&dev->ucb->dev, &dev_attr_batt_temp);
return 0;
}
static void ucb1x00_assabet_remove(struct ucb1x00_dev *dev)
{
- device_remove_file(&dev->ucb->cdev, &device_attr_batt_temp);
- device_remove_file(&dev->ucb->cdev, &device_attr_vcharger);
- device_remove_file(&dev->ucb->cdev, &device_attr_vbatt);
+ device_remove_file(&dev->ucb->dev, &dev_attr_batt_temp);
+ device_remove_file(&dev->ucb->dev, &dev_attr_vcharger);
+ device_remove_file(&dev->ucb->dev, &dev_attr_vbatt);
}
static struct ucb1x00_driver ucb1x00_assabet_driver = {
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 1654a33..1ea8482 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -65,6 +65,8 @@
unsigned int dma_len;
unsigned int dma_dir;
+ unsigned int dma_drcmrrx;
+ unsigned int dma_drcmrtx;
};
static void pxamci_stop_clock(struct pxamci_host *host)
@@ -131,13 +133,13 @@
if (data->flags & MMC_DATA_READ) {
host->dma_dir = DMA_FROM_DEVICE;
dcmd = DCMD_INCTRGADDR | DCMD_FLOWTRG;
- DRCMRTXMMC = 0;
- DRCMRRXMMC = host->dma | DRCMR_MAPVLD;
+ DRCMR(host->dma_drcmrtx) = 0;
+ DRCMR(host->dma_drcmrrx) = host->dma | DRCMR_MAPVLD;
} else {
host->dma_dir = DMA_TO_DEVICE;
dcmd = DCMD_INCSRCADDR | DCMD_FLOWSRC;
- DRCMRRXMMC = 0;
- DRCMRTXMMC = host->dma | DRCMR_MAPVLD;
+ DRCMR(host->dma_drcmrrx) = 0;
+ DRCMR(host->dma_drcmrtx) = host->dma | DRCMR_MAPVLD;
}
dcmd |= DCMD_BURST32 | DCMD_WIDTH1;
@@ -375,14 +377,23 @@
if (host->clkrt == CLKRT_OFF)
clk_enable(host->clk);
- /*
- * clk might result in a lower divisor than we
- * desire. check for that condition and adjust
- * as appropriate.
- */
- if (rate / clk > ios->clock)
- clk <<= 1;
- host->clkrt = fls(clk) - 1;
+ if (ios->clock == 26000000) {
+ /* to support 26MHz on pxa300/pxa310 */
+ host->clkrt = 7;
+ } else {
+ /* to handle (19.5MHz, 26MHz) */
+ if (!clk)
+ clk = 1;
+
+ /*
+ * clk might result in a lower divisor than we
+ * desire. check for that condition and adjust
+ * as appropriate.
+ */
+ if (rate / clk > ios->clock)
+ clk <<= 1;
+ host->clkrt = fls(clk) - 1;
+ }
/*
* we write clkrt on the next command
@@ -459,7 +470,7 @@
{
struct mmc_host *mmc;
struct pxamci_host *host = NULL;
- struct resource *r;
+ struct resource *r, *dmarx, *dmatx;
int ret, irq;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -519,7 +530,8 @@
* Calculate minimum clock rate, rounding up.
*/
mmc->f_min = (host->clkrate + 63) / 64;
- mmc->f_max = host->clkrate;
+ mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000
+ : host->clkrate;
mmc->ocr_avail = host->pdata ?
host->pdata->ocr_mask :
@@ -529,6 +541,9 @@
if (!cpu_is_pxa21x() && !cpu_is_pxa25x()) {
mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
host->cmdat |= CMDAT_SDIO_INT_EN;
+ if (cpu_is_pxa300() || cpu_is_pxa310())
+ mmc->caps |= MMC_CAP_MMC_HIGHSPEED |
+ MMC_CAP_SD_HIGHSPEED;
}
host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL);
@@ -570,6 +585,20 @@
platform_set_drvdata(pdev, mmc);
+ dmarx = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (!dmarx) {
+ ret = -ENXIO;
+ goto out;
+ }
+ host->dma_drcmrrx = dmarx->start;
+
+ dmatx = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (!dmatx) {
+ ret = -ENXIO;
+ goto out;
+ }
+ host->dma_drcmrtx = dmatx->start;
+
if (host->pdata && host->pdata->init)
host->pdata->init(&pdev->dev, pxamci_detect_irq, mmc);
@@ -613,8 +642,8 @@
END_CMD_RES|PRG_DONE|DATA_TRAN_DONE,
host->base + MMC_I_MASK);
- DRCMRRXMMC = 0;
- DRCMRTXMMC = 0;
+ DRCMR(host->dma_drcmrrx) = 0;
+ DRCMR(host->dma_drcmrtx) = 0;
free_irq(host->irq, host);
pxa_free_dma(host->dma);
diff --git a/drivers/mmc/host/pxamci.h b/drivers/mmc/host/pxamci.h
index 748c770..f6c2e2f 100644
--- a/drivers/mmc/host/pxamci.h
+++ b/drivers/mmc/host/pxamci.h
@@ -68,7 +68,7 @@
#define PRG_DONE (1 << 1)
#define DATA_TRAN_DONE (1 << 0)
-#ifdef CONFIG_PXA27x
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#define MMC_I_MASK_ALL 0x00001fff
#else
#define MMC_I_MASK_ALL 0x0000007f
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9af05a2..a672866 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -212,7 +212,7 @@
config MACB
tristate "Atmel MACB support"
- depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263
+ depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91CAP9
select PHYLIB
help
The Atmel MACB ethernet interface is found on many AT32 and AT91
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 3286d2a..6a20a54 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -66,6 +66,7 @@
#include <linux/dm9000.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
+#include <linux/irq.h>
#include <asm/delay.h>
#include <asm/irq.h>
@@ -113,7 +114,7 @@
#define writesl outsl
#define DM9000_IRQ_FLAGS (IRQF_SHARED | IRQF_TRIGGER_HIGH)
#else
-#define DM9000_IRQ_FLAGS IRQF_SHARED
+#define DM9000_IRQ_FLAGS (IRQF_SHARED | IRQT_RISING)
#endif
/*
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 7da7589..4020e9e 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1775,7 +1775,8 @@
* o actually GRAB the irq.
* o GRAB the region
*/
-static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr)
+static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
+ unsigned long irq_flags)
{
struct smc_local *lp = netdev_priv(dev);
static int version_printed = 0;
@@ -1941,7 +1942,7 @@
}
/* Grab the IRQ */
- retval = request_irq(dev->irq, &smc_interrupt, SMC_IRQ_FLAGS, dev->name, dev);
+ retval = request_irq(dev->irq, &smc_interrupt, irq_flags, dev->name, dev);
if (retval)
goto err_out;
@@ -2123,8 +2124,9 @@
static int smc_drv_probe(struct platform_device *pdev)
{
struct net_device *ndev;
- struct resource *res;
+ struct resource *res, *ires;
unsigned int __iomem *addr;
+ unsigned long irq_flags = SMC_IRQ_FLAGS;
int ret;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
@@ -2150,12 +2152,17 @@
SET_NETDEV_DEV(ndev, &pdev->dev);
ndev->dma = (unsigned char)-1;
- ndev->irq = platform_get_irq(pdev, 0);
- if (ndev->irq < 0) {
+
+ ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!ires) {
ret = -ENODEV;
goto out_free_netdev;
}
+ ndev->irq = ires->start;
+ if (SMC_IRQ_FLAGS == -1)
+ irq_flags = ires->flags & IRQF_TRIGGER_MASK;
+
ret = smc_request_attrib(pdev);
if (ret)
goto out_free_netdev;
@@ -2181,7 +2188,7 @@
#endif
platform_set_drvdata(pdev, ndev);
- ret = smc_probe(ndev, addr);
+ ret = smc_probe(ndev, addr, irq_flags);
if (ret != 0)
goto out_iounmap;
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 07b7f71..271c28d 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -54,6 +54,7 @@
#define SMC_outw(v, a, r) writew(v, (a) + (r))
#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
+#define SMC_IRQ_FLAGS (-1) /* from resource */
#elif defined(CONFIG_BLACKFIN)
@@ -158,7 +159,7 @@
#define SMC_outw(v, a, r) writew(v, (a) + (r))
#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
-#define SMC_IRQ_FLAGS (0)
+#define SMC_IRQ_FLAGS (-1)
#elif defined(CONFIG_SA1100_ASSABET)
@@ -177,6 +178,7 @@
#define SMC_outb(v, a, r) writeb(v, (a) + (r))
#define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l))
#define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l))
+#define SMC_IRQ_FLAGS (-1) /* from resource */
#elif defined(CONFIG_MACH_LOGICPD_PXA270)
@@ -194,7 +196,8 @@
#elif defined(CONFIG_ARCH_INNOKOM) || \
defined(CONFIG_MACH_MAINSTONE) || \
defined(CONFIG_ARCH_PXA_IDP) || \
- defined(CONFIG_ARCH_RAMSES)
+ defined(CONFIG_ARCH_RAMSES) || \
+ defined(CONFIG_ARCH_PCM027)
#define SMC_CAN_USE_8BIT 1
#define SMC_CAN_USE_16BIT 1
@@ -210,6 +213,7 @@
#define SMC_outl(v, a, r) writel(v, (a) + (r))
#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
+#define SMC_IRQ_FLAGS (-1) /* from resource */
/* We actually can't write halfwords properly if not word aligned */
static inline void
@@ -238,6 +242,7 @@
#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l)
#define SMC_outb(v, a, r) writeb(v, (a) + (r))
#define SMC_outw(v, a, r) writew(v, (a) + (r))
+#define SMC_IRQ_FLAGS (-1) /* from resource */
#elif defined(CONFIG_ARCH_OMAP)
@@ -252,17 +257,7 @@
#define SMC_outw(v, a, r) writew(v, (a) + (r))
#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
-
-#include <asm/mach-types.h>
-#include <asm/arch/cpu.h>
-
-#define SMC_IRQ_FLAGS (( \
- machine_is_omap_h2() \
- || machine_is_omap_h3() \
- || machine_is_omap_h4() \
- || (machine_is_omap_innovator() && !cpu_is_omap1510()) \
- ) ? IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING)
-
+#define SMC_IRQ_FLAGS (-1) /* from resource */
#elif defined(CONFIG_SH_SH4202_MICRODEV)
@@ -453,8 +448,7 @@
#define SMC_outl(v, a, r) writel(v, (a) + (r))
#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
-
-#define SMC_IRQ_FLAGS (0)
+#define SMC_IRQ_FLAGS (-1) /* from resource */
#else
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index 874923f..e439044 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -29,6 +29,7 @@
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/ss.h>
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 6f1e9a9..2eb3852 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -337,6 +337,8 @@
if (IS_ERR(rtc))
return PTR_ERR(rtc);
+ device_init_wakeup(&pdev->dev, 1);
+
platform_set_drvdata(pdev, rtc);
return 0;
@@ -352,9 +354,38 @@
return 0;
}
+#ifdef CONFIG_PM
+static int sa1100_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ if (pdev->dev.power.power_state.event != state.event) {
+ if (state.event == PM_EVENT_SUSPEND &&
+ device_may_wakeup(&pdev->dev))
+ enable_irq_wake(IRQ_RTCAlrm);
+
+ pdev->dev.power.power_state = state;
+ }
+ return 0;
+}
+
+static int sa1100_rtc_resume(struct platform_device *pdev)
+{
+ if (pdev->dev.power.power_state.event != PM_EVENT_ON) {
+ if (device_may_wakeup(&pdev->dev))
+ disable_irq_wake(IRQ_RTCAlrm);
+ pdev->dev.power.power_state = PMSG_ON;
+ }
+ return 0;
+}
+#else
+#define sa1100_rtc_suspend NULL
+#define sa1100_rtc_resume NULL
+#endif
+
static struct platform_driver sa1100_rtc_driver = {
.probe = sa1100_rtc_probe,
.remove = sa1100_rtc_remove,
+ .suspend = sa1100_rtc_suspend,
+ .resume = sa1100_rtc_resume,
.driver = {
.name = "sa1100-rtc",
},
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index facb678..6a48dfa 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -277,6 +277,8 @@
if (termios->c_iflag & INPCK)
port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY;
+ tty_encode_baud_rate(tty, baud, baud);
+
/*
* Which character status flags should we ignore?
*/
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index abf0504..aaaea81 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -153,6 +153,7 @@
config SPI_PXA2XX
tristate "PXA2xx SSP SPI master"
depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL
+ select PXA_SSP
help
This enables using a PXA2xx SSP port as a SPI master controller.
The driver can be configured to use any SSP port and additional
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 1c2ab54..eb817b8 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -27,6 +27,7 @@
#include <linux/spi/spi.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
+#include <linux/clk.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -36,6 +37,8 @@
#include <asm/arch/hardware.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/regs-ssp.h>
+#include <asm/arch/ssp.h>
#include <asm/arch/pxa2xx_spi.h>
MODULE_AUTHOR("Stephen Street");
@@ -80,6 +83,9 @@
/* Driver model hookup */
struct platform_device *pdev;
+ /* SSP Info */
+ struct ssp_device *ssp;
+
/* SPI framework hookup */
enum pxa_ssp_type ssp_type;
struct spi_master *master;
@@ -778,6 +784,16 @@
return retval;
}
+static unsigned int ssp_get_clk_div(struct ssp_device *ssp, int rate)
+{
+ unsigned long ssp_clk = clk_get_rate(ssp->clk);
+
+ if (ssp->type == PXA25x_SSP)
+ return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8;
+ else
+ return ((ssp_clk / rate - 1) & 0xfff) << 8;
+}
+
static void pump_transfers(unsigned long data)
{
struct driver_data *drv_data = (struct driver_data *)data;
@@ -785,6 +801,7 @@
struct spi_transfer *transfer = NULL;
struct spi_transfer *previous = NULL;
struct chip_data *chip = NULL;
+ struct ssp_device *ssp = drv_data->ssp;
void *reg = drv_data->ioaddr;
u32 clk_div = 0;
u8 bits = 0;
@@ -866,12 +883,7 @@
if (transfer->bits_per_word)
bits = transfer->bits_per_word;
- if (reg == SSP1_VIRT)
- clk_div = SSP1_SerClkDiv(speed);
- else if (reg == SSP2_VIRT)
- clk_div = SSP2_SerClkDiv(speed);
- else if (reg == SSP3_VIRT)
- clk_div = SSP3_SerClkDiv(speed);
+ clk_div = ssp_get_clk_div(ssp, speed);
if (bits <= 8) {
drv_data->n_bytes = 1;
@@ -1074,6 +1086,7 @@
struct pxa2xx_spi_chip *chip_info = NULL;
struct chip_data *chip;
struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+ struct ssp_device *ssp = drv_data->ssp;
unsigned int clk_div;
if (!spi->bits_per_word)
@@ -1157,18 +1170,7 @@
}
}
- if (drv_data->ioaddr == SSP1_VIRT)
- clk_div = SSP1_SerClkDiv(spi->max_speed_hz);
- else if (drv_data->ioaddr == SSP2_VIRT)
- clk_div = SSP2_SerClkDiv(spi->max_speed_hz);
- else if (drv_data->ioaddr == SSP3_VIRT)
- clk_div = SSP3_SerClkDiv(spi->max_speed_hz);
- else
- {
- dev_err(&spi->dev, "failed setup: unknown IO address=0x%p\n",
- drv_data->ioaddr);
- return -ENODEV;
- }
+ clk_div = ssp_get_clk_div(ssp, spi->max_speed_hz);
chip->speed_hz = spi->max_speed_hz;
chip->cr0 = clk_div
@@ -1183,15 +1185,15 @@
/* NOTE: PXA25x_SSP _could_ use external clocking ... */
if (drv_data->ssp_type != PXA25x_SSP)
- dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n",
+ dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n",
spi->bits_per_word,
- (CLOCK_SPEED_HZ)
+ clk_get_rate(ssp->clk)
/ (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
spi->mode & 0x3);
else
- dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n",
+ dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n",
spi->bits_per_word,
- (CLOCK_SPEED_HZ/2)
+ clk_get_rate(ssp->clk)
/ (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
spi->mode & 0x3);
@@ -1323,14 +1325,14 @@
struct pxa2xx_spi_master *platform_info;
struct spi_master *master;
struct driver_data *drv_data = 0;
- struct resource *memory_resource;
- int irq;
+ struct ssp_device *ssp;
int status = 0;
platform_info = dev->platform_data;
- if (platform_info->ssp_type == SSP_UNDEFINED) {
- dev_err(&pdev->dev, "undefined SSP\n");
+ ssp = ssp_request(pdev->id, pdev->name);
+ if (ssp == NULL) {
+ dev_err(&pdev->dev, "failed to request SSP%d\n", pdev->id);
return -ENODEV;
}
@@ -1338,12 +1340,14 @@
master = spi_alloc_master(dev, sizeof(struct driver_data) + 16);
if (!master) {
dev_err(&pdev->dev, "can not alloc spi_master\n");
+ ssp_free(ssp);
return -ENOMEM;
}
drv_data = spi_master_get_devdata(master);
drv_data->master = master;
drv_data->master_info = platform_info;
drv_data->pdev = pdev;
+ drv_data->ssp = ssp;
master->bus_num = pdev->id;
master->num_chipselect = platform_info->num_chipselect;
@@ -1351,21 +1355,13 @@
master->setup = setup;
master->transfer = transfer;
- drv_data->ssp_type = platform_info->ssp_type;
+ drv_data->ssp_type = ssp->type;
drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data +
sizeof(struct driver_data)), 8);
- /* Setup register addresses */
- memory_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!memory_resource) {
- dev_err(&pdev->dev, "memory resources not defined\n");
- status = -ENODEV;
- goto out_error_master_alloc;
- }
-
- drv_data->ioaddr = (void *)io_p2v((unsigned long)(memory_resource->start));
- drv_data->ssdr_physical = memory_resource->start + 0x00000010;
- if (platform_info->ssp_type == PXA25x_SSP) {
+ drv_data->ioaddr = ssp->mmio_base;
+ drv_data->ssdr_physical = ssp->phys_base + SSDR;
+ if (ssp->type == PXA25x_SSP) {
drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
drv_data->dma_cr1 = 0;
drv_data->clear_sr = SSSR_ROR;
@@ -1377,15 +1373,7 @@
drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR;
}
- /* Attach to IRQ */
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "irq resource not defined\n");
- status = -ENODEV;
- goto out_error_master_alloc;
- }
-
- status = request_irq(irq, ssp_int, 0, dev->bus_id, drv_data);
+ status = request_irq(ssp->irq, ssp_int, 0, dev->bus_id, drv_data);
if (status < 0) {
dev_err(&pdev->dev, "can not get IRQ\n");
goto out_error_master_alloc;
@@ -1418,29 +1406,12 @@
goto out_error_dma_alloc;
}
- if (drv_data->ioaddr == SSP1_VIRT) {
- DRCMRRXSSDR = DRCMR_MAPVLD
- | drv_data->rx_channel;
- DRCMRTXSSDR = DRCMR_MAPVLD
- | drv_data->tx_channel;
- } else if (drv_data->ioaddr == SSP2_VIRT) {
- DRCMRRXSS2DR = DRCMR_MAPVLD
- | drv_data->rx_channel;
- DRCMRTXSS2DR = DRCMR_MAPVLD
- | drv_data->tx_channel;
- } else if (drv_data->ioaddr == SSP3_VIRT) {
- DRCMRRXSS3DR = DRCMR_MAPVLD
- | drv_data->rx_channel;
- DRCMRTXSS3DR = DRCMR_MAPVLD
- | drv_data->tx_channel;
- } else {
- dev_err(dev, "bad SSP type\n");
- goto out_error_dma_alloc;
- }
+ DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel;
+ DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel;
}
/* Enable SOC clock */
- pxa_set_cken(platform_info->clock_enable, 1);
+ clk_enable(ssp->clk);
/* Load default SSP configuration */
write_SSCR0(0, drv_data->ioaddr);
@@ -1479,7 +1450,7 @@
destroy_queue(drv_data);
out_error_clock_enabled:
- pxa_set_cken(platform_info->clock_enable, 0);
+ clk_disable(ssp->clk);
out_error_dma_alloc:
if (drv_data->tx_channel != -1)
@@ -1488,17 +1459,18 @@
pxa_free_dma(drv_data->rx_channel);
out_error_irq_alloc:
- free_irq(irq, drv_data);
+ free_irq(ssp->irq, drv_data);
out_error_master_alloc:
spi_master_put(master);
+ ssp_free(ssp);
return status;
}
static int pxa2xx_spi_remove(struct platform_device *pdev)
{
struct driver_data *drv_data = platform_get_drvdata(pdev);
- int irq;
+ struct ssp_device *ssp = drv_data->ssp;
int status = 0;
if (!drv_data)
@@ -1520,28 +1492,21 @@
/* Disable the SSP at the peripheral and SOC level */
write_SSCR0(0, drv_data->ioaddr);
- pxa_set_cken(drv_data->master_info->clock_enable, 0);
+ clk_disable(ssp->clk);
/* Release DMA */
if (drv_data->master_info->enable_dma) {
- if (drv_data->ioaddr == SSP1_VIRT) {
- DRCMRRXSSDR = 0;
- DRCMRTXSSDR = 0;
- } else if (drv_data->ioaddr == SSP2_VIRT) {
- DRCMRRXSS2DR = 0;
- DRCMRTXSS2DR = 0;
- } else if (drv_data->ioaddr == SSP3_VIRT) {
- DRCMRRXSS3DR = 0;
- DRCMRTXSS3DR = 0;
- }
+ DRCMR(ssp->drcmr_rx) = 0;
+ DRCMR(ssp->drcmr_tx) = 0;
pxa_free_dma(drv_data->tx_channel);
pxa_free_dma(drv_data->rx_channel);
}
/* Release IRQ */
- irq = platform_get_irq(pdev, 0);
- if (irq >= 0)
- free_irq(irq, drv_data);
+ free_irq(ssp->irq, drv_data);
+
+ /* Release SSP */
+ ssp_free(ssp);
/* Disconnect from the SPI framework */
spi_unregister_master(drv_data->master);
@@ -1576,6 +1541,7 @@
static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
{
struct driver_data *drv_data = platform_get_drvdata(pdev);
+ struct ssp_device *ssp = drv_data->ssp;
int status = 0;
/* Check all childern for current power state */
@@ -1588,7 +1554,7 @@
if (status != 0)
return status;
write_SSCR0(0, drv_data->ioaddr);
- pxa_set_cken(drv_data->master_info->clock_enable, 0);
+ clk_disable(ssp->clk);
return 0;
}
@@ -1596,10 +1562,11 @@
static int pxa2xx_spi_resume(struct platform_device *pdev)
{
struct driver_data *drv_data = platform_get_drvdata(pdev);
+ struct ssp_device *ssp = drv_data->ssp;
int status = 0;
/* Enable the SSP clock */
- pxa_set_cken(drv_data->master_info->clock_enable, 1);
+ clk_disable(ssp->clk);
/* Start the queue running */
status = start_queue(drv_data);
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 7580aa5d..7a64990 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -33,6 +33,7 @@
default y if ARCH_LH7A404
default y if ARCH_S3C2410
default y if PXA27x
+ default y if PXA3xx
default y if ARCH_EP93XX
default y if ARCH_AT91
default y if ARCH_PNX4008
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index f81d08d..77a3759 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -308,7 +308,7 @@
config USB_GADGET_AT91
boolean "AT91 USB Device Port"
- depends on ARCH_AT91 && !ARCH_AT91SAM9RL
+ depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9
select USB_GADGET_SELECTED
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index ecfe800..ddd4ee1 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -997,7 +997,7 @@
#define PLATFORM_DRIVER ohci_hcd_lh7a404_driver
#endif
-#ifdef CONFIG_PXA27x
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#include "ohci-pxa27x.c"
#define PLATFORM_DRIVER ohci_hcd_pxa27x_driver
#endif
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 23d2fe5..ff9a798 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -22,6 +22,7 @@
#include <linux/device.h>
#include <linux/signal.h>
#include <linux/platform_device.h>
+#include <linux/clk.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
@@ -32,6 +33,8 @@
#define UHCRHPS(x) __REG2( 0x4C000050, (x)<<2 )
+static struct clk *usb_clk;
+
/*
PMM_NPS_MODE -- PMM Non-power switching mode
Ports are powered continuously.
@@ -80,7 +83,7 @@
inf = dev->platform_data;
- pxa_set_cken(CKEN_USBHOST, 1);
+ clk_enable(usb_clk);
UHCHR |= UHCHR_FHR;
udelay(11);
@@ -123,7 +126,7 @@
UHCCOMS |= 1;
udelay(10);
- pxa_set_cken(CKEN_USBHOST, 0);
+ clk_disable(usb_clk);
}
@@ -158,6 +161,10 @@
return -ENOMEM;
}
+ usb_clk = clk_get(&pdev->dev, "USBCLK");
+ if (IS_ERR(usb_clk))
+ return PTR_ERR(usb_clk);
+
hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x");
if (!hcd)
return -ENOMEM;
@@ -201,6 +208,7 @@
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
usb_put_hcd(hcd);
+ clk_put(usb_clk);
return retval;
}
@@ -225,6 +233,7 @@
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
+ clk_put(usb_clk);
}
/*-------------------------------------------------------------------------*/
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 5b3dbcf..758435f 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -889,7 +889,7 @@
config FB_ATMEL
tristate "AT91/AT32 LCD Controller support"
- depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
+ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 7c30cc8..f8e7111 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -30,7 +30,7 @@
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
#define ATMEL_LCDC_DMA_BURST_LEN 8
-#if defined(CONFIG_ARCH_AT91SAM9263)
+#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9)
#define ATMEL_LCDC_FIFO_SIZE 2048
#else
#define ATMEL_LCDC_FIFO_SIZE 512
diff --git a/fs/ioprio.c b/fs/ioprio.c
index e4e01bc..c4a1c3c 100644
--- a/fs/ioprio.c
+++ b/fs/ioprio.c
@@ -41,18 +41,28 @@
return err;
task_lock(task);
+ do {
+ ioc = task->io_context;
+ /* see wmb() in current_io_context() */
+ smp_read_barrier_depends();
+ if (ioc)
+ break;
- task->ioprio = ioprio;
+ ioc = alloc_io_context(GFP_ATOMIC, -1);
+ if (!ioc) {
+ err = -ENOMEM;
+ break;
+ }
+ task->io_context = ioc;
+ } while (1);
- ioc = task->io_context;
- /* see wmb() in current_io_context() */
- smp_read_barrier_depends();
-
- if (ioc)
+ if (!err) {
+ ioc->ioprio = ioprio;
ioc->ioprio_changed = 1;
+ }
task_unlock(task);
- return 0;
+ return err;
}
asmlinkage long sys_ioprio_set(int which, int who, int ioprio)
@@ -75,8 +85,6 @@
break;
case IOPRIO_CLASS_IDLE:
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
break;
case IOPRIO_CLASS_NONE:
if (data)
@@ -148,7 +156,9 @@
ret = security_task_getioprio(p);
if (ret)
goto out;
- ret = p->ioprio;
+ ret = IOPRIO_PRIO_VALUE(IOPRIO_CLASS_NONE, IOPRIO_NORM);
+ if (p->io_context)
+ ret = p->io_context->ioprio;
out:
return ret;
}
diff --git a/include/asm-arm/arch-at91/at91_lcdc.h b/include/asm-arm/arch-at91/at91_lcdc.h
deleted file mode 100644
index ab040a4..0000000
--- a/include/asm-arm/arch-at91/at91_lcdc.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_lcdc.h
- *
- * LCD Controller (LCDC).
- * Based on AT91SAM9261 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_LCDC_H
-#define AT91_LCDC_H
-
-#define AT91_LCDC_DMABADDR1 0x00 /* DMA Base Address Register 1 */
-#define AT91_LCDC_DMABADDR2 0x04 /* DMA Base Address Register 2 */
-#define AT91_LCDC_DMAFRMPT1 0x08 /* DMA Frame Pointer Register 1 */
-#define AT91_LCDC_DMAFRMPT2 0x0c /* DMA Frame Pointer Register 2 */
-#define AT91_LCDC_DMAFRMADD1 0x10 /* DMA Frame Address Register 1 */
-#define AT91_LCDC_DMAFRMADD2 0x14 /* DMA Frame Address Register 2 */
-
-#define AT91_LCDC_DMAFRMCFG 0x18 /* DMA Frame Configuration Register */
-#define AT91_LCDC_FRSIZE (0x7fffff << 0) /* Frame Size */
-#define AT91_LCDC_BLENGTH (0x7f << 24) /* Burst Length */
-
-#define AT91_LCDC_DMACON 0x1c /* DMA Control Register */
-#define AT91_LCDC_DMAEN (0x1 << 0) /* DMA Enable */
-#define AT91_LCDC_DMARST (0x1 << 1) /* DMA Reset */
-#define AT91_LCDC_DMABUSY (0x1 << 2) /* DMA Busy */
-
-#define AT91_LCDC_LCDCON1 0x0800 /* LCD Control Register 1 */
-#define AT91_LCDC_BYPASS (1 << 0) /* Bypass lcd_dotck divider */
-#define AT91_LCDC_CLKVAL (0x1ff << 12) /* Clock Divider */
-#define AT91_LCDC_LINCNT (0x7ff << 21) /* Line Counter */
-
-#define AT91_LCDC_LCDCON2 0x0804 /* LCD Control Register 2 */
-#define AT91_LCDC_DISTYPE (3 << 0) /* Display Type */
-#define AT91_LCDC_DISTYPE_STNMONO (0 << 0)
-#define AT91_LCDC_DISTYPE_STNCOLOR (1 << 0)
-#define AT91_LCDC_DISTYPE_TFT (2 << 0)
-#define AT91_LCDC_SCANMOD (1 << 2) /* Scan Mode */
-#define AT91_LCDC_SCANMOD_SINGLE (0 << 2)
-#define AT91_LCDC_SCANMOD_DUAL (1 << 2)
-#define AT91_LCDC_IFWIDTH (3 << 3) /*Interface Width */
-#define AT91_LCDC_IFWIDTH_4 (0 << 3)
-#define AT91_LCDC_IFWIDTH_8 (1 << 3)
-#define AT91_LCDC_IFWIDTH_16 (2 << 3)
-#define AT91_LCDC_PIXELSIZE (7 << 5) /* Bits per pixel */
-#define AT91_LCDC_PIXELSIZE_1 (0 << 5)
-#define AT91_LCDC_PIXELSIZE_2 (1 << 5)
-#define AT91_LCDC_PIXELSIZE_4 (2 << 5)
-#define AT91_LCDC_PIXELSIZE_8 (3 << 5)
-#define AT91_LCDC_PIXELSIZE_16 (4 << 5)
-#define AT91_LCDC_PIXELSIZE_24 (5 << 5)
-#define AT91_LCDC_INVVD (1 << 8) /* LCD Data polarity */
-#define AT91_LCDC_INVVD_NORMAL (0 << 8)
-#define AT91_LCDC_INVVD_INVERTED (1 << 8)
-#define AT91_LCDC_INVFRAME (1 << 9 ) /* LCD VSync polarity */
-#define AT91_LCDC_INVFRAME_NORMAL (0 << 9)
-#define AT91_LCDC_INVFRAME_INVERTED (1 << 9)
-#define AT91_LCDC_INVLINE (1 << 10) /* LCD HSync polarity */
-#define AT91_LCDC_INVLINE_NORMAL (0 << 10)
-#define AT91_LCDC_INVLINE_INVERTED (1 << 10)
-#define AT91_LCDC_INVCLK (1 << 11) /* LCD dotclk polarity */
-#define AT91_LCDC_INVCLK_NORMAL (0 << 11)
-#define AT91_LCDC_INVCLK_INVERTED (1 << 11)
-#define AT91_LCDC_INVDVAL (1 << 12) /* LCD dval polarity */
-#define AT91_LCDC_INVDVAL_NORMAL (0 << 12)
-#define AT91_LCDC_INVDVAL_INVERTED (1 << 12)
-#define AT91_LCDC_CLKMOD (1 << 15) /* LCD dotclk mode */
-#define AT91_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15)
-#define AT91_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15)
-#define AT91_LCDC_MEMOR (1 << 31) /* Memory Ordering Format */
-#define AT91_LCDC_MEMOR_BIG (0 << 31)
-#define AT91_LCDC_MEMOR_LITTLE (1 << 31)
-
-#define AT91_LCDC_TIM1 0x0808 /* LCD Timing Register 1 */
-#define AT91_LCDC_VFP (0xff << 0) /* Vertical Front Porch */
-#define AT91_LCDC_VBP (0xff << 8) /* Vertical Back Porch */
-#define AT91_LCDC_VPW (0x3f << 16) /* Vertical Synchronization Pulse Width */
-#define AT91_LCDC_VHDLY (0xf << 24) /* Vertical to Horizontal Delay */
-
-#define AT91_LCDC_TIM2 0x080c /* LCD Timing Register 2 */
-#define AT91_LCDC_HBP (0xff << 0) /* Horizontal Back Porch */
-#define AT91_LCDC_HPW (0x3f << 8) /* Horizontal Synchronization Pulse Width */
-#define AT91_LCDC_HFP (0x7ff << 21) /* Horizontal Front Porch */
-
-#define AT91_LCDC_LCDFRMCFG 0x0810 /* LCD Frame Configuration Register */
-#define AT91_LCDC_LINEVAL (0x7ff << 0) /* Vertical Size of LCD Module */
-#define AT91_LCDC_HOZVAL (0x7ff << 21) /* Horizontal Size of LCD Module */
-
-#define AT91_LCDC_FIFO 0x0814 /* LCD FIFO Register */
-#define AT91_LCDC_FIFOTH (0xffff) /* FIFO Threshold */
-
-#define AT91_LCDC_DP1_2 0x081c /* Dithering Pattern DP1_2 Register */
-#define AT91_LCDC_DP4_7 0x0820 /* Dithering Pattern DP4_7 Register */
-#define AT91_LCDC_DP3_5 0x0824 /* Dithering Pattern DP3_5 Register */
-#define AT91_LCDC_DP2_3 0x0828 /* Dithering Pattern DP2_3 Register */
-#define AT91_LCDC_DP5_7 0x082c /* Dithering Pattern DP5_7 Register */
-#define AT91_LCDC_DP3_4 0x0830 /* Dithering Pattern DP3_4 Register */
-#define AT91_LCDC_DP4_5 0x0834 /* Dithering Pattern DP4_5 Register */
-#define AT91_LCDC_DP6_7 0x0838 /* Dithering Pattern DP6_7 Register */
-#define AT91_LCDC_DP1_2_VAL (0xff)
-#define AT91_LCDC_DP4_7_VAL (0xfffffff)
-#define AT91_LCDC_DP3_5_VAL (0xfffff)
-#define AT91_LCDC_DP2_3_VAL (0xfff)
-#define AT91_LCDC_DP5_7_VAL (0xfffffff)
-#define AT91_LCDC_DP3_4_VAL (0xffff)
-#define AT91_LCDC_DP4_5_VAL (0xfffff)
-#define AT91_LCDC_DP6_7_VAL (0xfffffff)
-
-#define AT91_LCDC_PWRCON 0x083c /* Power Control Register */
-#define AT91_LCDC_PWR (1 << 0) /* LCD Module Power Control */
-#define AT91_LCDC_GUARDT (0x7f << 1) /* Delay in Frame Period */
-#define AT91_LCDC_BUSY (1 << 31) /* LCD Busy */
-
-#define AT91_LCDC_CONTRAST_CTR 0x0840 /* Contrast Control Register */
-#define AT91_LCDC_PS (3 << 0) /* Contrast Counter Prescaler */
-#define AT91_LCDC_PS_DIV1 (0 << 0)
-#define AT91_LCDC_PS_DIV2 (1 << 0)
-#define AT91_LCDC_PS_DIV4 (2 << 0)
-#define AT91_LCDC_PS_DIV8 (3 << 0)
-#define AT91_LCDC_POL (1 << 2) /* Polarity of output Pulse */
-#define AT91_LCDC_POL_NEGATIVE (0 << 2)
-#define AT91_LCDC_POL_POSITIVE (1 << 2)
-#define AT91_LCDC_ENA (1 << 3) /* PWM generator Control */
-#define AT91_LCDC_ENA_PWMDISABLE (0 << 3)
-#define AT91_LCDC_ENA_PWMENABLE (1 << 3)
-
-#define AT91_LCDC_CONTRAST_VAL 0x0844 /* Contrast Value Register */
-#define AT91_LCDC_CVAL (0xff) /* PWM compare value */
-
-#define AT91_LCDC_IER 0x0848 /* Interrupt Enable Register */
-#define AT91_LCDC_IDR 0x084c /* Interrupt Disable Register */
-#define AT91_LCDC_IMR 0x0850 /* Interrupt Mask Register */
-#define AT91_LCDC_ISR 0x0854 /* Interrupt Enable Register */
-#define AT91_LCDC_ICR 0x0858 /* Interrupt Clear Register */
-#define AT91_LCDC_LNI (1 << 0) /* Line Interrupt */
-#define AT91_LCDC_LSTLNI (1 << 1) /* Last Line Interrupt */
-#define AT91_LCDC_EOFI (1 << 2) /* DMA End Of Frame Interrupt */
-#define AT91_LCDC_UFLWI (1 << 4) /* FIFO Underflow Interrupt */
-#define AT91_LCDC_OWRI (1 << 5) /* FIFO Overwrite Interrupt */
-#define AT91_LCDC_MERI (1 << 6) /* DMA Memory Error Interrupt */
-
-#define AT91_LCDC_LUT_(n) (0x0c00 + ((n)*4)) /* Palette Entry 0..255 */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h
index 33ff5b6..52cd8e5 100644
--- a/include/asm-arm/arch-at91/at91_pmc.h
+++ b/include/asm-arm/arch-at91/at91_pmc.h
@@ -25,6 +25,7 @@
#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
+#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
@@ -37,7 +38,9 @@
#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */
+#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
+
+#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */
#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
@@ -52,6 +55,10 @@
#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
+#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */
+#define AT91_PMC_USBDIV_1 (0 << 28)
+#define AT91_PMC_USBDIV_2 (1 << 28)
+#define AT91_PMC_USBDIV_4 (2 << 28)
#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
diff --git a/include/asm-arm/arch-at91/at91_rtt.h b/include/asm-arm/arch-at91/at91_rtt.h
index bae1103..39a3263 100644
--- a/include/asm-arm/arch-at91/at91_rtt.h
+++ b/include/asm-arm/arch-at91/at91_rtt.h
@@ -13,19 +13,19 @@
#ifndef AT91_RTT_H
#define AT91_RTT_H
-#define AT91_RTT_MR (AT91_RTT + 0x00) /* Real-time Mode Register */
+#define AT91_RTT_MR 0x00 /* Real-time Mode Register */
#define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */
#define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */
#define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */
#define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */
-#define AT91_RTT_AR (AT91_RTT + 0x04) /* Real-time Alarm Register */
+#define AT91_RTT_AR 0x04 /* Real-time Alarm Register */
#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */
-#define AT91_RTT_VR (AT91_RTT + 0x08) /* Real-time Value Register */
+#define AT91_RTT_VR 0x08 /* Real-time Value Register */
#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */
-#define AT91_RTT_SR (AT91_RTT + 0x0c) /* Real-time Status Register */
+#define AT91_RTT_SR 0x0c /* Real-time Status Register */
#define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */
#define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */
diff --git a/include/asm-arm/arch-at91/at91_twi.h b/include/asm-arm/arch-at91/at91_twi.h
index ca9a907..f9f2e3c 100644
--- a/include/asm-arm/arch-at91/at91_twi.h
+++ b/include/asm-arm/arch-at91/at91_twi.h
@@ -21,6 +21,8 @@
#define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */
#define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */
#define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */
+#define AT91_TWI_SVEN (1 << 4) /* Slave Transfer Enable [SAM9260 only] */
+#define AT91_TWI_SVDIS (1 << 5) /* Slave Transfer Disable [SAM9260 only] */
#define AT91_TWI_SWRST (1 << 7) /* Software Reset */
#define AT91_TWI_MMR 0x04 /* Master Mode Register */
@@ -32,6 +34,9 @@
#define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */
#define AT91_TWI_DADR (0x7f << 16) /* Device Address */
+#define AT91_TWI_SMR 0x08 /* Slave Mode Register [SAM9260 only] */
+#define AT91_TWI_SADR (0x7f << 16) /* Slave Address */
+
#define AT91_TWI_IADR 0x0c /* Internal Address Register */
#define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */
@@ -43,9 +48,15 @@
#define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */
#define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */
#define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */
+#define AT91_TWI_SVREAD (1 << 3) /* Slave Read [SAM9260 only] */
+#define AT91_TWI_SVACC (1 << 4) /* Slave Access [SAM9260 only] */
+#define AT91_TWI_GACC (1 << 5) /* General Call Access [SAM9260 only] */
#define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */
#define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */
#define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */
+#define AT91_TWI_ARBLST (1 << 9) /* Arbitration Lost [SAM9260 only] */
+#define AT91_TWI_SCLWS (1 << 10) /* Clock Wait State [SAM9260 only] */
+#define AT91_TWI_EOSACC (1 << 11) /* End of Slave Address [SAM9260 only] */
#define AT91_TWI_IER 0x24 /* Interrupt Enable Register */
#define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */
diff --git a/include/asm-arm/arch-at91/at91cap9.h b/include/asm-arm/arch-at91/at91cap9.h
new file mode 100644
index 0000000..73e1fcf
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91cap9.h
@@ -0,0 +1,121 @@
+/*
+ * include/asm-arm/arch-at91/at91cap9.h
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_H
+#define AT91CAP9_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */
+#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */
+#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */
+#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */
+#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */
+#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */
+#define AT91CAP9_ID_US0 8 /* USART 0 */
+#define AT91CAP9_ID_US1 9 /* USART 1 */
+#define AT91CAP9_ID_US2 10 /* USART 2 */
+#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */
+#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */
+#define AT91CAP9_ID_CAN 13 /* CAN */
+#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */
+#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */
+#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */
+#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */
+#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */
+#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */
+#define AT91CAP9_ID_EMAC 22 /* Ethernet */
+#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */
+#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */
+#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */
+#define AT91CAP9_ID_LCDC 26 /* LCD Controller */
+#define AT91CAP9_ID_DMA 27 /* DMA Controller */
+#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */
+#define AT91CAP9_ID_UHP 29 /* USB Host Port */
+#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91CAP9_BASE_UDPHS 0xfff78000
+#define AT91CAP9_BASE_TCB0 0xfff7c000
+#define AT91CAP9_BASE_TC0 0xfff7c000
+#define AT91CAP9_BASE_TC1 0xfff7c040
+#define AT91CAP9_BASE_TC2 0xfff7c080
+#define AT91CAP9_BASE_MCI0 0xfff80000
+#define AT91CAP9_BASE_MCI1 0xfff84000
+#define AT91CAP9_BASE_TWI 0xfff88000
+#define AT91CAP9_BASE_US0 0xfff8c000
+#define AT91CAP9_BASE_US1 0xfff90000
+#define AT91CAP9_BASE_US2 0xfff94000
+#define AT91CAP9_BASE_SSC0 0xfff98000
+#define AT91CAP9_BASE_SSC1 0xfff9c000
+#define AT91CAP9_BASE_AC97C 0xfffa0000
+#define AT91CAP9_BASE_SPI0 0xfffa4000
+#define AT91CAP9_BASE_SPI1 0xfffa8000
+#define AT91CAP9_BASE_CAN 0xfffac000
+#define AT91CAP9_BASE_PWMC 0xfffb8000
+#define AT91CAP9_BASE_EMAC 0xfffbc000
+#define AT91CAP9_BASE_ADC 0xfffc0000
+#define AT91CAP9_BASE_ISI 0xfffc4000
+#define AT91_BASE_SYS 0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC (0xffffe200 - AT91_BASE_SYS)
+#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
+#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS)
+#define AT91_DMA (0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+
+/*
+ * Internal Memory.
+ */
+#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */
+#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */
+
+#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */
+
+#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */
+#define AT91CAP9_UDPHS_BASE 0x00600000 /* USB High Speed Device Port */
+#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
+
+#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91cap9_matrix.h b/include/asm-arm/arch-at91/at91cap9_matrix.h
new file mode 100644
index 0000000..a641686
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91cap9_matrix.h
@@ -0,0 +1,132 @@
+/*
+ * include/asm-arm/arch-at91/at91cap9_matrix.h
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_MATRIX_H
+#define AT91CAP9_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
+#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */
+#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
+#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */
+#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */
+#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */
+#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
+#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
+#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
+#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
+#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
+#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+#define AT91_MATRIX_RCB6 (1 << 6)
+#define AT91_MATRIX_RCB7 (1 << 7)
+#define AT91_MATRIX_RCB8 (1 << 8)
+#define AT91_MATRIX_RCB9 (1 << 9)
+#define AT91_MATRIX_RCB10 (1 << 10)
+#define AT91_MATRIX_RCB11 (1 << 11)
+
+#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
+#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1)
+#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */
+#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
+
+#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */
+#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */
+#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam9260_matrix.h b/include/asm-arm/arch-at91/at91sam9260_matrix.h
index aacb1e9..a8e9fec 100644
--- a/include/asm-arm/arch-at91/at91sam9260_matrix.h
+++ b/include/asm-arm/arch-at91/at91sam9260_matrix.h
@@ -67,7 +67,7 @@
#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_CS4A_SMC (0 << 4)
#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_CS5A (1 << 5 ) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
#define AT91_MATRIX_CS5A_SMC (0 << 5)
#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
diff --git a/include/asm-arm/arch-at91/at91sam9263_matrix.h b/include/asm-arm/arch-at91/at91sam9263_matrix.h
index 6fc6e4b..72f6e66 100644
--- a/include/asm-arm/arch-at91/at91sam9263_matrix.h
+++ b/include/asm-arm/arch-at91/at91sam9263_matrix.h
@@ -44,7 +44,7 @@
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
diff --git a/include/asm-arm/arch-at91/at91sam9rl_matrix.h b/include/asm-arm/arch-at91/at91sam9rl_matrix.h
index b15f11b..8422417 100644
--- a/include/asm-arm/arch-at91/at91sam9rl_matrix.h
+++ b/include/asm-arm/arch-at91/at91sam9rl_matrix.h
@@ -38,7 +38,7 @@
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
index 7905496..55b07bd 100644
--- a/include/asm-arm/arch-at91/board.h
+++ b/include/asm-arm/arch-at91/board.h
@@ -34,6 +34,7 @@
#include <linux/mtd/partitions.h>
#include <linux/device.h>
#include <linux/i2c.h>
+#include <linux/leds.h>
#include <linux/spi/spi.h>
/* USB Device */
@@ -71,7 +72,7 @@
};
extern void __init at91_add_device_eth(struct at91_eth_data *data);
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263)
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9)
#define eth_platform_data at91_eth_data
#endif
@@ -101,13 +102,23 @@
extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
/* Serial */
+#define ATMEL_UART_CTS 0x01
+#define ATMEL_UART_RTS 0x02
+#define ATMEL_UART_DSR 0x04
+#define ATMEL_UART_DTR 0x08
+#define ATMEL_UART_DCD 0x10
+#define ATMEL_UART_RI 0x20
+
+extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
+extern void __init at91_set_serial_console(unsigned portnr);
+
struct at91_uart_config {
unsigned short console_tty; /* tty number of serial console */
unsigned short nr_tty; /* number of serial tty's */
short tty_map[]; /* map UART to tty number */
};
extern struct platform_device *atmel_default_console_device;
-extern void __init at91_init_serial(struct at91_uart_config *config);
+extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
struct atmel_uart_data {
short use_dma_tx; /* use transmit DMA? */
@@ -116,6 +127,23 @@
};
extern void __init at91_add_device_serial(void);
+/*
+ * SSC -- accessed through ssc_request(id). Drivers don't bind to SSC
+ * platform devices. Their SSC ID is part of their configuration data,
+ * along with information about which SSC signals they should use.
+ */
+#define ATMEL_SSC_TK 0x01
+#define ATMEL_SSC_TF 0x02
+#define ATMEL_SSC_TD 0x04
+#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
+
+#define ATMEL_SSC_RK 0x10
+#define ATMEL_SSC_RF 0x20
+#define ATMEL_SSC_RD 0x40
+#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
+
+extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
+
/* LCD Controller */
struct atmel_lcdfb_info;
extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
@@ -126,10 +154,12 @@
};
extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
+ /* ISI */
+extern void __init at91_add_device_isi(void);
+
/* LEDs */
-extern u8 at91_leds_cpu;
-extern u8 at91_leds_timer;
extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
+extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
/* FIXME: this needs a better location, but gets stuff building again */
extern int at91_suspend_entering_slow_clock(void);
diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
index 080cbb4..7145166 100644
--- a/include/asm-arm/arch-at91/cpu.h
+++ b/include/asm-arm/arch-at91/cpu.h
@@ -21,13 +21,13 @@
#define ARCH_ID_AT91SAM9260 0x019803a0
#define ARCH_ID_AT91SAM9261 0x019703a0
#define ARCH_ID_AT91SAM9263 0x019607a0
+#define ARCH_ID_AT91SAM9RL64 0x019b03a0
+#define ARCH_ID_AT91CAP9 0x039A03A0
#define ARCH_ID_AT91SAM9XE128 0x329973a0
#define ARCH_ID_AT91SAM9XE256 0x329a93a0
#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
-#define ARCH_ID_AT91SAM9RL64 0x019b03a0
-
#define ARCH_ID_AT91M40800 0x14080044
#define ARCH_ID_AT91R40807 0x44080746
#define ARCH_ID_AT91M40807 0x14080745
@@ -81,6 +81,11 @@
#define cpu_is_at91sam9rl() (0)
#endif
+#ifdef CONFIG_ARCH_AT91CAP9
+#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
+#else
+#define cpu_is_at91cap9() (0)
+#endif
/*
* Since this is ARM, we will never run on any AVR32 CPU. But these
diff --git a/include/asm-arm/arch-at91/entry-macro.S b/include/asm-arm/arch-at91/entry-macro.S
index cc1d850..1005eee 100644
--- a/include/asm-arm/arch-at91/entry-macro.S
+++ b/include/asm-arm/arch-at91/entry-macro.S
@@ -17,13 +17,13 @@
.endm
.macro get_irqnr_preamble, base, tmp
+ ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral
ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number
teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
index 8f1cdd3..2c826d82 100644
--- a/include/asm-arm/arch-at91/hardware.h
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -26,6 +26,8 @@
#include <asm/arch/at91sam9263.h>
#elif defined(CONFIG_ARCH_AT91SAM9RL)
#include <asm/arch/at91sam9rl.h>
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <asm/arch/at91cap9.h>
#elif defined(CONFIG_ARCH_AT91X40)
#include <asm/arch/at91x40.h>
#else
diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h
index a310698..f1933b0 100644
--- a/include/asm-arm/arch-at91/timex.h
+++ b/include/asm-arm/arch-at91/timex.h
@@ -42,6 +42,11 @@
#define AT91SAM9_MASTER_CLOCK 100000000
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+#elif defined(CONFIG_ARCH_AT91CAP9)
+
+#define AT91CAP9_MASTER_CLOCK 100000000
+#define CLOCK_TICK_RATE (AT91CAP9_MASTER_CLOCK/16)
+
#elif defined(CONFIG_ARCH_AT91X40)
#define AT91X40_MASTER_CLOCK 40000000
diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/include/asm-arm/arch-ep93xx/gpio.h
index 1ee14a1..9b1864b 100644
--- a/include/asm-arm/arch-ep93xx/gpio.h
+++ b/include/asm-arm/arch-ep93xx/gpio.h
@@ -5,16 +5,6 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
-#define GPIO_IN 0
-#define GPIO_OUT 1
-
-#define EP93XX_GPIO_LOW 0
-#define EP93XX_GPIO_HIGH 1
-
-extern void gpio_line_config(int line, int direction);
-extern int gpio_line_get(int line);
-extern void gpio_line_set(int line, int value);
-
/* GPIO port A. */
#define EP93XX_GPIO_LINE_A(x) ((x) + 0)
#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0)
@@ -38,7 +28,7 @@
#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7)
/* GPIO port C. */
-#define EP93XX_GPIO_LINE_C(x) ((x) + 16)
+#define EP93XX_GPIO_LINE_C(x) ((x) + 40)
#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0)
#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1)
#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2)
@@ -71,7 +61,7 @@
#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7)
/* GPIO port F. */
-#define EP93XX_GPIO_LINE_F(x) ((x) + 40)
+#define EP93XX_GPIO_LINE_F(x) ((x) + 16)
#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0)
#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1)
#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2)
@@ -103,5 +93,49 @@
#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6)
#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7)
+/* maximum value for gpio line identifiers */
+#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7)
+
+/* maximum value for irq capable line identifiers */
+#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7)
+
+/* new generic GPIO API - see Documentation/gpio.txt */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+ if (gpio > EP93XX_GPIO_LINE_MAX)
+ return -EINVAL;
+ return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+int gpio_direction_input(unsigned gpio);
+int gpio_direction_output(unsigned gpio, int value);
+int gpio_get_value(unsigned gpio);
+void gpio_set_value(unsigned gpio, int value);
+
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+
+/*
+ * Map GPIO A0..A7 (0..7) to irq 64..71,
+ * B0..B7 (7..15) to irq 72..79, and
+ * F0..F7 (16..24) to irq 80..87.
+ */
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
+ return 64 + gpio;
+
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return irq - gpio_to_irq(0);
+}
#endif
diff --git a/include/asm-arm/arch-ep93xx/irqs.h b/include/asm-arm/arch-ep93xx/irqs.h
index 2a8c636..53d4a68 100644
--- a/include/asm-arm/arch-ep93xx/irqs.h
+++ b/include/asm-arm/arch-ep93xx/irqs.h
@@ -67,12 +67,6 @@
#define IRQ_EP93XX_SAI 60
#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff
-/*
- * Map GPIO A0..A7 to irq 64..71, B0..B7 to 72..79, and
- * F0..F7 to 80..87.
- */
-#define IRQ_EP93XX_GPIO(x) (64 + (((x) + (((x) >> 2) & 8)) & 0x1f))
-
#define NR_EP93XX_IRQS (64 + 24)
#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x))
diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h
index eeeea90..9c5d235 100644
--- a/include/asm-arm/arch-ixp4xx/io.h
+++ b/include/asm-arm/arch-ixp4xx/io.h
@@ -61,13 +61,13 @@
if((addr < PCIBIOS_MIN_MEM) || (addr > 0x4fffffff))
return __arm_ioremap(addr, size, mtype);
- return (void *)addr;
+ return (void __iomem *)addr;
}
static inline void
__ixp4xx_iounmap(void __iomem *addr)
{
- if ((u32)addr >= VMALLOC_START)
+ if ((__force u32)addr >= VMALLOC_START)
__iounmap(addr);
}
@@ -141,9 +141,9 @@
static inline void
__ixp4xx_writel(u32 value, volatile void __iomem *p)
{
- u32 addr = (u32)p;
+ u32 addr = (__force u32)p;
if (addr >= VMALLOC_START) {
- __raw_writel(value, addr);
+ __raw_writel(value, p);
return;
}
@@ -208,11 +208,11 @@
static inline unsigned long
__ixp4xx_readl(const volatile void __iomem *p)
{
- u32 addr = (u32)p;
+ u32 addr = (__force u32)p;
u32 data;
if (addr >= VMALLOC_START)
- return __raw_readl(addr);
+ return __raw_readl(p);
if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
return 0xffffffff;
@@ -438,7 +438,7 @@
return (unsigned int)__ixp4xx_inl(port & PIO_MASK);
else {
#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- return le32_to_cpu(__raw_readl((u32)port));
+ return le32_to_cpu((__force __le32)__raw_readl(addr));
#else
return (unsigned int)__ixp4xx_readl(addr);
#endif
@@ -523,7 +523,7 @@
__ixp4xx_outl(value, port & PIO_MASK);
else
#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writel(cpu_to_le32(value), port);
+ __raw_writel((u32 __force)cpu_to_le32(value), addr);
#else
__ixp4xx_writel(value, addr);
#endif
diff --git a/include/asm-arm/arch-ks8695/regs-gpio.h b/include/asm-arm/arch-ks8695/regs-gpio.h
index 57fcf9f..6b95d77 100644
--- a/include/asm-arm/arch-ks8695/regs-gpio.h
+++ b/include/asm-arm/arch-ks8695/regs-gpio.h
@@ -49,5 +49,7 @@
#define IOPC_TM_FALLING (4) /* Falling Edge Detection */
#define IOPC_TM_EDGE (6) /* Both Edge Detection */
+/* Port Data Register */
+#define IOPD_(x) (1 << (x)) /* Signal Level of GPIO Pin x */
#endif
diff --git a/include/asm-arm/arch-msm/board.h b/include/asm-arm/arch-msm/board.h
new file mode 100644
index 0000000..763051f
--- /dev/null
+++ b/include/asm-arm/arch-msm/board.h
@@ -0,0 +1,37 @@
+/* linux/include/asm-arm/arch-msm/board.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_BOARD_H
+#define __ASM_ARCH_MSM_BOARD_H
+
+#include <linux/types.h>
+
+/* platform device data structures */
+
+struct msm_mddi_platform_data
+{
+ void (*panel_power)(int on);
+ unsigned has_vsync_irq:1;
+};
+
+/* common init routines for use by arch/arm/mach-msm/board-*.c */
+
+void __init msm_add_devices(void);
+void __init msm_map_common_io(void);
+void __init msm_init_irq(void);
+void __init msm_init_gpio(void);
+
+#endif
diff --git a/include/asm-arm/arch-msm/debug-macro.S b/include/asm-arm/arch-msm/debug-macro.S
new file mode 100644
index 0000000..393d527
--- /dev/null
+++ b/include/asm-arm/arch-msm/debug-macro.S
@@ -0,0 +1,40 @@
+/* include/asm-arm/arch-msm7200/debug-macro.S
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm/hardware.h>
+#include <asm/arch/msm_iomap.h>
+
+ .macro addruart,rx
+ @ see if the MMU is enabled and select appropriate base address
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ ldreq \rx, =MSM_UART1_PHYS
+ ldrne \rx, =MSM_UART1_BASE
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0x0C]
+ .endm
+
+ .macro waituart,rd,rx
+ @ wait for TX_READY
+1: ldr \rd, [\rx, #0x08]
+ tst \rd, #0x04
+ beq 1b
+ .endm
+
+ .macro busyuart,rd,rx
+ .endm
diff --git a/include/asm-arm/arch-msm/dma.h b/include/asm-arm/arch-msm/dma.h
new file mode 100644
index 0000000..e4b565b
--- /dev/null
+++ b/include/asm-arm/arch-msm/dma.h
@@ -0,0 +1,151 @@
+/* linux/include/asm-arm/arch-msm/dma.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_DMA_H
+
+#include <linux/list.h>
+#include <asm/arch/msm_iomap.h>
+
+struct msm_dmov_cmd {
+ struct list_head list;
+ unsigned int cmdptr;
+ void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result);
+/* void (*user_result_func)(struct msm_dmov_cmd *cmd); */
+};
+
+void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
+void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd);
+int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
+/* int msm_dmov_exec_cmd_etc(unsigned id, unsigned int cmdptr, int timeout, int interruptible); */
+
+
+
+#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
+#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
+#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
+#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
+
+/* only security domain 3 is available to the ARM11
+ * SD0 -> mARM trusted, SD1 -> mARM nontrusted, SD2 -> aDSP, SD3 -> aARM
+ */
+
+#define DMOV_CMD_PTR(ch) DMOV_SD3(0x000, ch)
+#define DMOV_CMD_LIST (0 << 29) /* does not work */
+#define DMOV_CMD_PTR_LIST (1 << 29) /* works */
+#define DMOV_CMD_INPUT_CFG (2 << 29) /* untested */
+#define DMOV_CMD_OUTPUT_CFG (3 << 29) /* untested */
+#define DMOV_CMD_ADDR(addr) ((addr) >> 3)
+
+#define DMOV_RSLT(ch) DMOV_SD3(0x040, ch)
+#define DMOV_RSLT_VALID (1 << 31) /* 0 == host has empties result fifo */
+#define DMOV_RSLT_ERROR (1 << 3)
+#define DMOV_RSLT_FLUSH (1 << 2)
+#define DMOV_RSLT_DONE (1 << 1) /* top pointer done */
+#define DMOV_RSLT_USER (1 << 0) /* command with FR force result */
+
+#define DMOV_FLUSH0(ch) DMOV_SD3(0x080, ch)
+#define DMOV_FLUSH1(ch) DMOV_SD3(0x0C0, ch)
+#define DMOV_FLUSH2(ch) DMOV_SD3(0x100, ch)
+#define DMOV_FLUSH3(ch) DMOV_SD3(0x140, ch)
+#define DMOV_FLUSH4(ch) DMOV_SD3(0x180, ch)
+#define DMOV_FLUSH5(ch) DMOV_SD3(0x1C0, ch)
+
+#define DMOV_STATUS(ch) DMOV_SD3(0x200, ch)
+#define DMOV_STATUS_RSLT_COUNT(n) (((n) >> 29))
+#define DMOV_STATUS_CMD_COUNT(n) (((n) >> 27) & 3)
+#define DMOV_STATUS_RSLT_VALID (1 << 1)
+#define DMOV_STATUS_CMD_PTR_RDY (1 << 0)
+
+#define DMOV_ISR DMOV_SD3(0x380, 0)
+
+#define DMOV_CONFIG(ch) DMOV_SD3(0x300, ch)
+#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2)
+#define DMOV_CONFIG_FORCE_FLUSH_RSLT (1 << 1)
+#define DMOV_CONFIG_IRQ_EN (1 << 0)
+
+/* channel assignments */
+
+#define DMOV_NAND_CHAN 7
+#define DMOV_NAND_CRCI_CMD 5
+#define DMOV_NAND_CRCI_DATA 4
+
+#define DMOV_SDC1_CHAN 8
+#define DMOV_SDC1_CRCI 6
+
+#define DMOV_SDC2_CHAN 8
+#define DMOV_SDC2_CRCI 7
+
+#define DMOV_TSIF_CHAN 10
+#define DMOV_TSIF_CRCI 10
+
+#define DMOV_USB_CHAN 11
+
+/* no client rate control ifc (eg, ram) */
+#define DMOV_NONE_CRCI 0
+
+
+/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover
+ * is going to walk a list of 32bit pointers as described below. Each
+ * pointer points to a *array* of dmov_s, etc structs. The last pointer
+ * in the list is marked with CMD_PTR_LP. The last struct in each array
+ * is marked with CMD_LC (see below).
+ */
+#define CMD_PTR_ADDR(addr) ((addr) >> 3)
+#define CMD_PTR_LP (1 << 31) /* last pointer */
+#define CMD_PTR_PT (3 << 29) /* ? */
+
+/* Single Item Mode */
+typedef struct {
+ unsigned cmd;
+ unsigned src;
+ unsigned dst;
+ unsigned len;
+} dmov_s;
+
+/* Scatter/Gather Mode */
+typedef struct {
+ unsigned cmd;
+ unsigned src_dscr;
+ unsigned dst_dscr;
+ unsigned _reserved;
+} dmov_sg;
+
+/* bits for the cmd field of the above structures */
+
+#define CMD_LC (1 << 31) /* last command */
+#define CMD_FR (1 << 22) /* force result -- does not work? */
+#define CMD_OCU (1 << 21) /* other channel unblock */
+#define CMD_OCB (1 << 20) /* other channel block */
+#define CMD_TCB (1 << 19) /* ? */
+#define CMD_DAH (1 << 18) /* destination address hold -- does not work?*/
+#define CMD_SAH (1 << 17) /* source address hold -- does not work? */
+
+#define CMD_MODE_SINGLE (0 << 0) /* dmov_s structure used */
+#define CMD_MODE_SG (1 << 0) /* untested */
+#define CMD_MODE_IND_SG (2 << 0) /* untested */
+#define CMD_MODE_BOX (3 << 0) /* untested */
+
+#define CMD_DST_SWAP_BYTES (1 << 14) /* exchange each byte n with byte n+1 */
+#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */
+#define CMD_DST_SWAP_WORDS (1 << 16) /* exchange each word n with word n+1 */
+
+#define CMD_SRC_SWAP_BYTES (1 << 11) /* exchange each byte n with byte n+1 */
+#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */
+#define CMD_SRC_SWAP_WORDS (1 << 13) /* exchange each word n with word n+1 */
+
+#define CMD_DST_CRCI(n) (((n) & 15) << 7)
+#define CMD_SRC_CRCI(n) (((n) & 15) << 3)
+
+#endif
diff --git a/include/asm-arm/arch-msm/entry-macro.S b/include/asm-arm/arch-msm/entry-macro.S
new file mode 100644
index 0000000..ee24aec
--- /dev/null
+++ b/include/asm-arm/arch-msm/entry-macro.S
@@ -0,0 +1,38 @@
+/* include/asm-arm/arch-msm7200/entry-macro.S
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm/arch/msm_iomap.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ @ enable imprecise aborts
+ cpsie a
+ mov \base, #MSM_VIC_BASE
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ @ 0xD0 has irq# or old irq# if the irq has been handled
+ @ 0xD4 has irq# or -1 if none pending *but* if you just
+ @ read 0xD4 you never get the first irq for some reason
+ ldr \irqnr, [\base, #0xD0]
+ ldr \irqnr, [\base, #0xD4]
+ cmp \irqnr, #0xffffffff
+ .endm
diff --git a/include/asm-arm/arch-msm/hardware.h b/include/asm-arm/arch-msm/hardware.h
new file mode 100644
index 0000000..89af2b7
--- /dev/null
+++ b/include/asm-arm/arch-msm/hardware.h
@@ -0,0 +1,18 @@
+/* linux/include/asm-arm/arch-msm/hardware.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_HARDWARE_H
+
+#endif
diff --git a/include/asm-arm/arch-msm/io.h b/include/asm-arm/arch-msm/io.h
new file mode 100644
index 0000000..4645ae2
--- /dev/null
+++ b/include/asm-arm/arch-msm/io.h
@@ -0,0 +1,33 @@
+/* include/asm-arm/arch-msm/io.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __arch_ioremap __msm_ioremap
+#define __arch_iounmap __iounmap
+
+void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype);
+
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)addr;
+}
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/include/asm-arm/arch-msm/irqs.h b/include/asm-arm/arch-msm/irqs.h
new file mode 100644
index 0000000..565430c
--- /dev/null
+++ b/include/asm-arm/arch-msm/irqs.h
@@ -0,0 +1,89 @@
+/* linux/include/asm-arm/arch-msm/irqs.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IRQS_H
+
+/* MSM ARM11 Interrupt Numbers */
+/* See 80-VE113-1 A, pp219-221 */
+
+#define INT_A9_M2A_0 0
+#define INT_A9_M2A_1 1
+#define INT_A9_M2A_2 2
+#define INT_A9_M2A_3 3
+#define INT_A9_M2A_4 4
+#define INT_A9_M2A_5 5
+#define INT_A9_M2A_6 6
+#define INT_GP_TIMER_EXP 7
+#define INT_DEBUG_TIMER_EXP 8
+#define INT_UART1 9
+#define INT_UART2 10
+#define INT_UART3 11
+#define INT_UART1_RX 12
+#define INT_UART2_RX 13
+#define INT_UART3_RX 14
+#define INT_USB_OTG 15
+#define INT_MDDI_PRI 16
+#define INT_MDDI_EXT 17
+#define INT_MDDI_CLIENT 18
+#define INT_MDP 19
+#define INT_GRAPHICS 20
+#define INT_ADM_AARM 21
+#define INT_ADSP_A11 22
+#define INT_ADSP_A9_A11 23
+#define INT_SDC1_0 24
+#define INT_SDC1_1 25
+#define INT_SDC2_0 26
+#define INT_SDC2_1 27
+#define INT_KEYSENSE 28
+#define INT_TCHSCRN_SSBI 29
+#define INT_TCHSCRN1 30
+#define INT_TCHSCRN2 31
+
+#define INT_GPIO_GROUP1 (32 + 0)
+#define INT_GPIO_GROUP2 (32 + 1)
+#define INT_PWB_I2C (32 + 2)
+#define INT_SOFTRESET (32 + 3)
+#define INT_NAND_WR_ER_DONE (32 + 4)
+#define INT_NAND_OP_DONE (32 + 5)
+#define INT_PBUS_ARM11 (32 + 6)
+#define INT_AXI_MPU_SMI (32 + 7)
+#define INT_AXI_MPU_EBI1 (32 + 8)
+#define INT_AD_HSSD (32 + 9)
+#define INT_ARM11_PMU (32 + 10)
+#define INT_ARM11_DMA (32 + 11)
+#define INT_TSIF_IRQ (32 + 12)
+#define INT_UART1DM_IRQ (32 + 13)
+#define INT_UART1DM_RX (32 + 14)
+#define INT_USB_HS (32 + 15)
+#define INT_SDC3_0 (32 + 16)
+#define INT_SDC3_1 (32 + 17)
+#define INT_SDC4_0 (32 + 18)
+#define INT_SDC4_1 (32 + 19)
+#define INT_UART2DM_RX (32 + 20)
+#define INT_UART2DM_IRQ (32 + 21)
+
+/* 22-31 are reserved */
+
+#define MSM_IRQ_BIT(irq) (1 << ((irq) & 31))
+
+#define NR_MSM_IRQS 64
+#define NR_GPIO_IRQS 122
+#define NR_BOARD_IRQS 64
+#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS)
+
+#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n))
+
+#endif
diff --git a/include/asm-arm/arch-msm/memory.h b/include/asm-arm/arch-msm/memory.h
new file mode 100644
index 0000000..b5ce0e9
--- /dev/null
+++ b/include/asm-arm/arch-msm/memory.h
@@ -0,0 +1,27 @@
+/* linux/include/asm-arm/arch-msm/memory.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/* physical offset of RAM */
+#define PHYS_OFFSET UL(0x10000000)
+
+/* bus address and physical addresses are identical */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
+
diff --git a/include/asm-arm/arch-msm/msm_iomap.h b/include/asm-arm/arch-msm/msm_iomap.h
new file mode 100644
index 0000000..b8955cc
--- /dev/null
+++ b/include/asm-arm/arch-msm/msm_iomap.h
@@ -0,0 +1,104 @@
+/* linux/include/asm-arm/arch-msm/msm_iomap.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * The MSM peripherals are spread all over across 768MB of physical
+ * space, which makes just having a simple IO_ADDRESS macro to slide
+ * them into the right virtual location rough. Instead, we will
+ * provide a master phys->virt mapping for peripherals here.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IOMAP_H
+#define __ASM_ARCH_MSM_IOMAP_H
+
+#include <asm/sizes.h>
+
+/* Physical base address and size of peripherals.
+ * Ordered by the virtual base addresses they will be mapped at.
+ *
+ * MSM_VIC_BASE must be an value that can be loaded via a "mov"
+ * instruction, otherwise entry-macro.S will not compile.
+ *
+ * If you add or remove entries here, you'll want to edit the
+ * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
+ * changes.
+ *
+ */
+
+#define MSM_VIC_BASE 0xE0000000
+#define MSM_VIC_PHYS 0xC0000000
+#define MSM_VIC_SIZE SZ_4K
+
+#define MSM_CSR_BASE 0xE0001000
+#define MSM_CSR_PHYS 0xC0100000
+#define MSM_CSR_SIZE SZ_4K
+
+#define MSM_GPT_PHYS MSM_CSR_PHYS
+#define MSM_GPT_BASE MSM_CSR_BASE
+#define MSM_GPT_SIZE SZ_4K
+
+#define MSM_DMOV_BASE 0xE0002000
+#define MSM_DMOV_PHYS 0xA9700000
+#define MSM_DMOV_SIZE SZ_4K
+
+#define MSM_UART1_BASE 0xE0003000
+#define MSM_UART1_PHYS 0xA9A00000
+#define MSM_UART1_SIZE SZ_4K
+
+#define MSM_UART2_BASE 0xE0004000
+#define MSM_UART2_PHYS 0xA9B00000
+#define MSM_UART2_SIZE SZ_4K
+
+#define MSM_UART3_BASE 0xE0005000
+#define MSM_UART3_PHYS 0xA9C00000
+#define MSM_UART3_SIZE SZ_4K
+
+#define MSM_I2C_BASE 0xE0006000
+#define MSM_I2C_PHYS 0xA9900000
+#define MSM_I2C_SIZE SZ_4K
+
+#define MSM_GPIO1_BASE 0xE0007000
+#define MSM_GPIO1_PHYS 0xA9200000
+#define MSM_GPIO1_SIZE SZ_4K
+
+#define MSM_GPIO2_BASE 0xE0008000
+#define MSM_GPIO2_PHYS 0xA9300000
+#define MSM_GPIO2_SIZE SZ_4K
+
+#define MSM_HSUSB_BASE 0xE0009000
+#define MSM_HSUSB_PHYS 0xA0800000
+#define MSM_HSUSB_SIZE SZ_4K
+
+#define MSM_CLK_CTL_BASE 0xE000A000
+#define MSM_CLK_CTL_PHYS 0xA8600000
+#define MSM_CLK_CTL_SIZE SZ_4K
+
+#define MSM_PMDH_BASE 0xE000B000
+#define MSM_PMDH_PHYS 0xAA600000
+#define MSM_PMDH_SIZE SZ_4K
+
+#define MSM_EMDH_BASE 0xE000C000
+#define MSM_EMDH_PHYS 0xAA700000
+#define MSM_EMDH_SIZE SZ_4K
+
+#define MSM_MDP_BASE 0xE0010000
+#define MSM_MDP_PHYS 0xAA200000
+#define MSM_MDP_SIZE 0x000F0000
+
+#define MSM_SHARED_RAM_BASE 0xE0100000
+#define MSM_SHARED_RAM_PHYS 0x01F00000
+#define MSM_SHARED_RAM_SIZE SZ_1M
+
+#endif
diff --git a/include/asm-arm/arch-msm/system.h b/include/asm-arm/arch-msm/system.h
new file mode 100644
index 0000000..7c5544b
--- /dev/null
+++ b/include/asm-arm/arch-msm/system.h
@@ -0,0 +1,23 @@
+/* linux/include/asm-arm/arch-msm/system.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm/hardware.h>
+
+void arch_idle(void);
+
+static inline void arch_reset(char mode)
+{
+ for (;;) ; /* depends on IPC w/ other core */
+}
diff --git a/include/asm-arm/arch-msm/timex.h b/include/asm-arm/arch-msm/timex.h
new file mode 100644
index 0000000..154b23f
--- /dev/null
+++ b/include/asm-arm/arch-msm/timex.h
@@ -0,0 +1,20 @@
+/* linux/include/asm-arm/arch-msm/timex.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_TIMEX_H
+
+#define CLOCK_TICK_RATE 1000000
+
+#endif
diff --git a/include/asm-arm/arch-msm/uncompress.h b/include/asm-arm/arch-msm/uncompress.h
new file mode 100644
index 0000000..e91ed78
--- /dev/null
+++ b/include/asm-arm/arch-msm/uncompress.h
@@ -0,0 +1,36 @@
+/* linux/include/asm-arm/arch-msm/uncompress.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
+
+#include "hardware.h"
+
+static void putc(int c)
+{
+}
+
+static inline void flush(void)
+{
+}
+
+static inline void arch_decomp_setup(void)
+{
+}
+
+static inline void arch_decomp_wdog(void)
+{
+}
+
+#endif
diff --git a/include/asm-arm/arch-msm/vmalloc.h b/include/asm-arm/arch-msm/vmalloc.h
new file mode 100644
index 0000000..60f8d91
--- /dev/null
+++ b/include/asm-arm/arch-msm/vmalloc.h
@@ -0,0 +1,22 @@
+/* linux/include/asm-arm/arch-msm/vmalloc.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_VMALLOC_H
+#define __ASM_ARCH_MSM_VMALLOC_H
+
+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+
+#endif
+
diff --git a/include/asm-arm/arch-orion/debug-macro.S b/include/asm-arm/arch-orion/debug-macro.S
new file mode 100644
index 0000000..e2a8064
--- /dev/null
+++ b/include/asm-arm/arch-orion/debug-macro.S
@@ -0,0 +1,17 @@
+/*
+ * linux/include/asm-arm/arch-orion/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+ .macro addruart,rx
+ mov \rx, #0xf1000000
+ orr \rx, \rx, #0x00012000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-orion/dma.h b/include/asm-arm/arch-orion/dma.h
new file mode 100644
index 0000000..40a8c17
--- /dev/null
+++ b/include/asm-arm/arch-orion/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/include/asm-arm/arch-orion/entry-macro.S b/include/asm-arm/arch-orion/entry-macro.S
new file mode 100644
index 0000000..b76075a
--- /dev/null
+++ b/include/asm-arm/arch-orion/entry-macro.S
@@ -0,0 +1,31 @@
+/*
+ * include/asm-arm/arch-orion/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Orion platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/arch/orion.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =MAIN_IRQ_CAUSE
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqstat, [\base, #0] @ main cause
+ ldr \tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask
+ mov \irqnr, #0 @ default irqnr
+ @ find cause bits that are unmasked
+ ands \irqstat, \irqstat, \tmp @ clear Z flag if any
+ clzne \irqnr, \irqstat @ calc irqnr
+ rsbne \irqnr, \irqnr, #31
+ .endm
diff --git a/include/asm-arm/arch-orion/gpio.h b/include/asm-arm/arch-orion/gpio.h
new file mode 100644
index 0000000..d66284f
--- /dev/null
+++ b/include/asm-arm/arch-orion/gpio.h
@@ -0,0 +1,28 @@
+/*
+ * include/asm-arm/arch-orion/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+extern int gpio_request(unsigned pin, const char *label);
+extern void gpio_free(unsigned pin);
+extern int gpio_direction_input(unsigned pin);
+extern int gpio_direction_output(unsigned pin, int value);
+extern int gpio_get_value(unsigned pin);
+extern void gpio_set_value(unsigned pin, int value);
+extern void orion_gpio_set_blink(unsigned pin, int blink);
+extern void gpio_display(void); /* debug */
+
+static inline int gpio_to_irq(int pin)
+{
+ return pin + IRQ_ORION_GPIO_START;
+}
+
+static inline int irq_to_gpio(int irq)
+{
+ return irq - IRQ_ORION_GPIO_START;
+}
+
+#include <asm-generic/gpio.h> /* cansleep wrappers */
diff --git a/include/asm-arm/arch-orion/hardware.h b/include/asm-arm/arch-orion/hardware.h
new file mode 100644
index 0000000..8a12d21
--- /dev/null
+++ b/include/asm-arm/arch-orion/hardware.h
@@ -0,0 +1,24 @@
+/*
+ * include/asm-arm/arch-orion/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#define __ASM_ARCH_HARDWARE_H__
+
+#include "orion.h"
+
+#define PCI_MEMORY_VADDR ORION_PCI_SYS_MEM_BASE
+#define PCI_IO_VADDR ORION_PCI_SYS_IO_BASE
+
+#define pcibios_assign_all_busses() 1
+
+#define PCIBIOS_MIN_IO 0x1000
+#define PCIBIOS_MIN_MEM 0x01000000
+#define PCIMEM_BASE PCI_MEMORY_VADDR /* mem base for VGA */
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-orion/io.h b/include/asm-arm/arch-orion/io.h
new file mode 100644
index 0000000..e0b8c39
--- /dev/null
+++ b/include/asm-arm/arch-orion/io.h
@@ -0,0 +1,27 @@
+/*
+ * include/asm-arm/arch-orion/io.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include "orion.h"
+
+#define IO_SPACE_LIMIT 0xffffffff
+#define IO_SPACE_REMAP ORION_PCI_SYS_IO_BASE
+
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)addr;
+}
+
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/include/asm-arm/arch-orion/irqs.h b/include/asm-arm/arch-orion/irqs.h
new file mode 100644
index 0000000..eea65ca
--- /dev/null
+++ b/include/asm-arm/arch-orion/irqs.h
@@ -0,0 +1,61 @@
+/*
+ * include/asm-arm/arch-orion/irqs.h
+ *
+ * IRQ definitions for Orion SoC
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H__
+#define __ASM_ARCH_IRQS_H__
+
+#include "orion.h" /* need GPIO_MAX */
+
+/*
+ * Orion Main Interrupt Controller
+ */
+#define IRQ_ORION_BRIDGE 0
+#define IRQ_ORION_DOORBELL_H2C 1
+#define IRQ_ORION_DOORBELL_C2H 2
+#define IRQ_ORION_UART0 3
+#define IRQ_ORION_UART1 4
+#define IRQ_ORION_I2C 5
+#define IRQ_ORION_GPIO_0_7 6
+#define IRQ_ORION_GPIO_8_15 7
+#define IRQ_ORION_GPIO_16_23 8
+#define IRQ_ORION_GPIO_24_31 9
+#define IRQ_ORION_PCIE0_ERR 10
+#define IRQ_ORION_PCIE0_INT 11
+#define IRQ_ORION_USB1_CTRL 12
+#define IRQ_ORION_DEV_BUS_ERR 14
+#define IRQ_ORION_PCI_ERR 15
+#define IRQ_ORION_USB_BR_ERR 16
+#define IRQ_ORION_USB0_CTRL 17
+#define IRQ_ORION_ETH_RX 18
+#define IRQ_ORION_ETH_TX 19
+#define IRQ_ORION_ETH_MISC 20
+#define IRQ_ORION_ETH_SUM 21
+#define IRQ_ORION_ETH_ERR 22
+#define IRQ_ORION_IDMA_ERR 23
+#define IRQ_ORION_IDMA_0 24
+#define IRQ_ORION_IDMA_1 25
+#define IRQ_ORION_IDMA_2 26
+#define IRQ_ORION_IDMA_3 27
+#define IRQ_ORION_CESA 28
+#define IRQ_ORION_SATA 29
+#define IRQ_ORION_XOR0 30
+#define IRQ_ORION_XOR1 31
+
+/*
+ * Orion General Purpose Pins
+ */
+#define IRQ_ORION_GPIO_START 32
+#define NR_GPIO_IRQS GPIO_MAX
+
+#define NR_IRQS (IRQ_ORION_GPIO_START + NR_GPIO_IRQS)
+
+#endif /* __ASM_ARCH_IRQS_H__ */
diff --git a/include/asm-arm/arch-orion/memory.h b/include/asm-arm/arch-orion/memory.h
new file mode 100644
index 0000000..d954dba
--- /dev/null
+++ b/include/asm-arm/arch-orion/memory.h
@@ -0,0 +1,15 @@
+/*
+ * include/asm-arm/arch-orion/memory.h
+ *
+ * Marvell Orion memory definitions
+ */
+
+#ifndef __ASM_ARCH_MMU_H
+#define __ASM_ARCH_MMU_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/include/asm-arm/arch-orion/orion.h b/include/asm-arm/arch-orion/orion.h
new file mode 100644
index 0000000..f787f75
--- /dev/null
+++ b/include/asm-arm/arch-orion/orion.h
@@ -0,0 +1,143 @@
+/*
+ * include/asm-arm/arch-orion/orion.h
+ *
+ * Generic definitions of Orion SoC flavors:
+ * Orion-1, Orion-NAS, Orion-VoIP, and Orion-2.
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_ORION_H__
+#define __ASM_ARCH_ORION_H__
+
+/*******************************************************************************
+ * Orion Address Map
+ * Use the same mapping (1:1 virtual:physical) of internal registers and
+ * PCI system (PCI+PCIE) for all machines.
+ * Each machine defines the rest of its mapping (e.g. device bus flashes)
+ ******************************************************************************/
+#define ORION_REGS_BASE 0xf1000000
+#define ORION_REGS_SIZE SZ_1M
+
+#define ORION_PCI_SYS_MEM_BASE 0xe0000000
+#define ORION_PCIE_MEM_BASE ORION_PCI_SYS_MEM_BASE
+#define ORION_PCIE_MEM_SIZE SZ_128M
+#define ORION_PCI_MEM_BASE (ORION_PCIE_MEM_BASE + ORION_PCIE_MEM_SIZE)
+#define ORION_PCI_MEM_SIZE SZ_128M
+
+#define ORION_PCI_SYS_IO_BASE 0xf2000000
+#define ORION_PCIE_IO_BASE ORION_PCI_SYS_IO_BASE
+#define ORION_PCIE_IO_SIZE SZ_1M
+#define ORION_PCIE_IO_REMAP (ORION_PCIE_IO_BASE - ORION_PCI_SYS_IO_BASE)
+#define ORION_PCI_IO_BASE (ORION_PCIE_IO_BASE + ORION_PCIE_IO_SIZE)
+#define ORION_PCI_IO_SIZE SZ_1M
+#define ORION_PCI_IO_REMAP (ORION_PCI_IO_BASE - ORION_PCI_SYS_IO_BASE)
+/* Relevant only for Orion-NAS */
+#define ORION_PCIE_WA_BASE 0xf0000000
+#define ORION_PCIE_WA_SIZE SZ_16M
+
+/*******************************************************************************
+ * Supported Devices & Revisions
+ ******************************************************************************/
+/* Orion-1 (88F5181) */
+#define MV88F5181_DEV_ID 0x5181
+#define MV88F5181_REV_B1 3
+/* Orion-NAS (88F5182) */
+#define MV88F5182_DEV_ID 0x5182
+#define MV88F5182_REV_A2 2
+/* Orion-2 (88F5281) */
+#define MV88F5281_DEV_ID 0x5281
+#define MV88F5281_REV_D1 5
+#define MV88F5281_REV_D2 6
+
+/*******************************************************************************
+ * Orion Registers Map
+ ******************************************************************************/
+#define ORION_DDR_REG_BASE (ORION_REGS_BASE | 0x00000)
+#define ORION_DEV_BUS_REG_BASE (ORION_REGS_BASE | 0x10000)
+#define ORION_BRIDGE_REG_BASE (ORION_REGS_BASE | 0x20000)
+#define ORION_PCI_REG_BASE (ORION_REGS_BASE | 0x30000)
+#define ORION_PCIE_REG_BASE (ORION_REGS_BASE | 0x40000)
+#define ORION_USB0_REG_BASE (ORION_REGS_BASE | 0x50000)
+#define ORION_ETH_REG_BASE (ORION_REGS_BASE | 0x70000)
+#define ORION_SATA_REG_BASE (ORION_REGS_BASE | 0x80000)
+#define ORION_USB1_REG_BASE (ORION_REGS_BASE | 0xa0000)
+
+#define ORION_DDR_REG(x) (ORION_DDR_REG_BASE | (x))
+#define ORION_DEV_BUS_REG(x) (ORION_DEV_BUS_REG_BASE | (x))
+#define ORION_BRIDGE_REG(x) (ORION_BRIDGE_REG_BASE | (x))
+#define ORION_PCI_REG(x) (ORION_PCI_REG_BASE | (x))
+#define ORION_PCIE_REG(x) (ORION_PCIE_REG_BASE | (x))
+#define ORION_USB0_REG(x) (ORION_USB0_REG_BASE | (x))
+#define ORION_USB1_REG(x) (ORION_USB1_REG_BASE | (x))
+#define ORION_ETH_REG(x) (ORION_ETH_REG_BASE | (x))
+#define ORION_SATA_REG(x) (ORION_SATA_REG_BASE | (x))
+
+/*******************************************************************************
+ * Device Bus Registers
+ ******************************************************************************/
+#define MPP_0_7_CTRL ORION_DEV_BUS_REG(0x000)
+#define MPP_8_15_CTRL ORION_DEV_BUS_REG(0x004)
+#define MPP_16_19_CTRL ORION_DEV_BUS_REG(0x050)
+#define MPP_DEV_CTRL ORION_DEV_BUS_REG(0x008)
+#define MPP_RESET_SAMPLE ORION_DEV_BUS_REG(0x010)
+#define GPIO_OUT ORION_DEV_BUS_REG(0x100)
+#define GPIO_IO_CONF ORION_DEV_BUS_REG(0x104)
+#define GPIO_BLINK_EN ORION_DEV_BUS_REG(0x108)
+#define GPIO_IN_POL ORION_DEV_BUS_REG(0x10c)
+#define GPIO_DATA_IN ORION_DEV_BUS_REG(0x110)
+#define GPIO_EDGE_CAUSE ORION_DEV_BUS_REG(0x114)
+#define GPIO_EDGE_MASK ORION_DEV_BUS_REG(0x118)
+#define GPIO_LEVEL_MASK ORION_DEV_BUS_REG(0x11c)
+#define DEV_BANK_0_PARAM ORION_DEV_BUS_REG(0x45c)
+#define DEV_BANK_1_PARAM ORION_DEV_BUS_REG(0x460)
+#define DEV_BANK_2_PARAM ORION_DEV_BUS_REG(0x464)
+#define DEV_BANK_BOOT_PARAM ORION_DEV_BUS_REG(0x46c)
+#define DEV_BUS_CTRL ORION_DEV_BUS_REG(0x4c0)
+#define DEV_BUS_INT_CAUSE ORION_DEV_BUS_REG(0x4d0)
+#define DEV_BUS_INT_MASK ORION_DEV_BUS_REG(0x4d4)
+#define I2C_BASE ORION_DEV_BUS_REG(0x1000)
+#define UART0_BASE ORION_DEV_BUS_REG(0x2000)
+#define UART1_BASE ORION_DEV_BUS_REG(0x2100)
+#define GPIO_MAX 32
+
+/***************************************************************************
+ * Orion CPU Bridge Registers
+ **************************************************************************/
+#define CPU_CONF ORION_BRIDGE_REG(0x100)
+#define CPU_CTRL ORION_BRIDGE_REG(0x104)
+#define CPU_RESET_MASK ORION_BRIDGE_REG(0x108)
+#define CPU_SOFT_RESET ORION_BRIDGE_REG(0x10c)
+#define POWER_MNG_CTRL_REG ORION_BRIDGE_REG(0x11C)
+#define BRIDGE_CAUSE ORION_BRIDGE_REG(0x110)
+#define BRIDGE_MASK ORION_BRIDGE_REG(0x114)
+#define MAIN_IRQ_CAUSE ORION_BRIDGE_REG(0x200)
+#define MAIN_IRQ_MASK ORION_BRIDGE_REG(0x204)
+#define TIMER_CTRL ORION_BRIDGE_REG(0x300)
+#define TIMER_VAL(x) ORION_BRIDGE_REG(0x314 + ((x) * 8))
+#define TIMER_VAL_RELOAD(x) ORION_BRIDGE_REG(0x310 + ((x) * 8))
+
+#ifndef __ASSEMBLY__
+
+/*******************************************************************************
+ * Helpers to access Orion registers
+ ******************************************************************************/
+#include <asm/types.h>
+#include <asm/io.h>
+
+#define orion_read(r) __raw_readl(r)
+#define orion_write(r, val) __raw_writel(val, r)
+
+/*
+ * These are not preempt safe. Locks, if needed, must be taken care by caller.
+ */
+#define orion_setbits(r, mask) orion_write((r), orion_read(r) | (mask))
+#define orion_clrbits(r, mask) orion_write((r), orion_read(r) & ~(mask))
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARCH_ORION_H__ */
diff --git a/include/asm-arm/arch-orion/platform.h b/include/asm-arm/arch-orion/platform.h
new file mode 100644
index 0000000..143c38e
--- /dev/null
+++ b/include/asm-arm/arch-orion/platform.h
@@ -0,0 +1,25 @@
+/*
+ * asm-arm/arch-orion/platform.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_PLATFORM_H__
+#define __ASM_ARCH_PLATFORM_H__
+
+/*
+ * Device bus NAND private data
+ */
+struct orion_nand_data {
+ struct mtd_partition *parts;
+ u32 nr_parts;
+ u8 ale; /* address line number connected to ALE */
+ u8 cle; /* address line number connected to CLE */
+ u8 width; /* buswidth */
+};
+
+#endif
diff --git a/include/asm-arm/arch-orion/system.h b/include/asm-arm/arch-orion/system.h
new file mode 100644
index 0000000..17704c6
--- /dev/null
+++ b/include/asm-arm/arch-orion/system.h
@@ -0,0 +1,31 @@
+/*
+ * include/asm-arm/arch-orion/system.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/orion.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ /*
+ * Enable and issue soft reset
+ */
+ orion_setbits(CPU_RESET_MASK, (1 << 2));
+ orion_setbits(CPU_SOFT_RESET, 1);
+}
+
+#endif
diff --git a/include/asm-arm/arch-orion/timex.h b/include/asm-arm/arch-orion/timex.h
new file mode 100644
index 0000000..26c2c91
--- /dev/null
+++ b/include/asm-arm/arch-orion/timex.h
@@ -0,0 +1,12 @@
+/*
+ * include/asm-arm/arch-orion/timex.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define ORION_TCLK 166666667
+#define CLOCK_TICK_RATE ORION_TCLK
diff --git a/include/asm-arm/arch-orion/uncompress.h b/include/asm-arm/arch-orion/uncompress.h
new file mode 100644
index 0000000..a1a222f
--- /dev/null
+++ b/include/asm-arm/arch-orion/uncompress.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-arm/arch-orion/uncompress.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/arch/orion.h>
+
+#define MV_UART_LSR ((volatile unsigned char *)(UART0_BASE + 0x14))
+#define MV_UART_THR ((volatile unsigned char *)(UART0_BASE + 0x0))
+
+#define LSR_THRE 0x20
+
+static void putc(const char c)
+{
+ int j = 0x1000;
+ while (--j && !(*MV_UART_LSR & LSR_THRE))
+ barrier();
+ *MV_UART_THR = c;
+}
+
+static void flush(void)
+{
+}
+
+static void orion_early_putstr(const char *ptr)
+{
+ char c;
+ while ((c = *ptr++) != '\0') {
+ if (c == '\n')
+ putc('\r');
+ putc(c);
+ }
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-orion/vmalloc.h b/include/asm-arm/arch-orion/vmalloc.h
new file mode 100644
index 0000000..23e2a10
--- /dev/null
+++ b/include/asm-arm/arch-orion/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * include/asm-arm/arch-orion/vmalloc.h
+ */
+
+#define VMALLOC_END 0xf0000000
diff --git a/include/asm-arm/arch-pxa/colibri.h b/include/asm-arm/arch-pxa/colibri.h
new file mode 100644
index 0000000..2ae373f
--- /dev/null
+++ b/include/asm-arm/arch-pxa/colibri.h
@@ -0,0 +1,19 @@
+#ifndef _COLIBRI_H_
+#define _COLIBRI_H_
+
+/* physical memory regions */
+#define COLIBRI_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */
+#define COLIBRI_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet DM9000 region */
+#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */
+
+/* virtual memory regions */
+#define COLIBRI_DISK_VIRT 0xF0000000 /* Disk On Chip region */
+
+/* size of flash */
+#define COLIBRI_FLASH_SIZE 0x02000000 /* Flash size 32 MB */
+
+/* Ethernet Controller Davicom DM9000 */
+#define GPIO_DM9000 114
+#define COLIBRI_ETH_IRQ IRQ_GPIO(GPIO_DM9000)
+
+#endif /* _COLIBRI_H_ */
diff --git a/include/asm-arm/arch-pxa/corgi.h b/include/asm-arm/arch-pxa/corgi.h
index e554caa..bf85650 100644
--- a/include/asm-arm/arch-pxa/corgi.h
+++ b/include/asm-arm/arch-pxa/corgi.h
@@ -104,7 +104,6 @@
*/
extern struct platform_device corgiscoop_device;
extern struct platform_device corgissp_device;
-extern struct platform_device corgifb_device;
#endif /* __ASM_ARCH_CORGI_H */
diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h
index b76ee6d..c562b97 100644
--- a/include/asm-arm/arch-pxa/irqs.h
+++ b/include/asm-arm/arch-pxa/irqs.h
@@ -180,7 +180,8 @@
#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
#elif defined(CONFIG_ARCH_LUBBOCK) || \
defined(CONFIG_MACH_LOGICPD_PXA270) || \
- defined(CONFIG_MACH_MAINSTONE)
+ defined(CONFIG_MACH_MAINSTONE) || \
+ defined(CONFIG_MACH_PCM027)
#define NR_IRQS (IRQ_BOARD_END)
#else
#define NR_IRQS (IRQ_BOARD_START)
@@ -227,6 +228,13 @@
#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2)
#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3)
+/* phyCORE-PXA270 (PCM027) Interrupts */
+#define PCM027_IRQ(x) (IRQ_BOARD_START + (x))
+#define PCM027_BTDET_IRQ PCM027_IRQ(0)
+#define PCM027_FF_RI_IRQ PCM027_IRQ(1)
+#define PCM027_MMCDET_IRQ PCM027_IRQ(2)
+#define PCM027_PM_5V_IRQ PCM027_IRQ(3)
+
/* ITE8152 irqs */
/* add IT8152 IRQs beyond BOARD_END */
#ifdef CONFIG_PCI_HOST_ITE8152
diff --git a/include/asm-arm/arch-pxa/littleton.h b/include/asm-arm/arch-pxa/littleton.h
new file mode 100644
index 0000000..79d209b
--- /dev/null
+++ b/include/asm-arm/arch-pxa/littleton.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_ZYLONITE_H
+#define __ASM_ARCH_ZYLONITE_H
+
+#define LITTLETON_ETH_PHYS 0x30000000
+
+#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/include/asm-arm/arch-pxa/magician.h b/include/asm-arm/arch-pxa/magician.h
new file mode 100644
index 0000000..337f51f
--- /dev/null
+++ b/include/asm-arm/arch-pxa/magician.h
@@ -0,0 +1,111 @@
+/*
+ * GPIO and IRQ definitions for HTC Magician PDA phones
+ *
+ * Copyright (c) 2007 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MAGICIAN_H_
+#define _MAGICIAN_H_
+
+#include <asm/arch/pxa-regs.h>
+
+/*
+ * PXA GPIOs
+ */
+
+#define GPIO0_MAGICIAN_KEY_POWER 0
+#define GPIO9_MAGICIAN_UNKNOWN 9
+#define GPIO10_MAGICIAN_GSM_IRQ 10
+#define GPIO11_MAGICIAN_GSM_OUT1 11
+#define GPIO13_MAGICIAN_CPLD_IRQ 13
+#define GPIO18_MAGICIAN_UNKNOWN 18
+#define GPIO22_MAGICIAN_VIBRA_EN 22
+#define GPIO26_MAGICIAN_GSM_POWER 26
+#define GPIO27_MAGICIAN_USBC_PUEN 27
+#define GPIO30_MAGICIAN_nCHARGE_EN 30
+#define GPIO37_MAGICIAN_KEY_HANGUP 37
+#define GPIO38_MAGICIAN_KEY_CONTACTS 38
+#define GPIO40_MAGICIAN_GSM_OUT2 40
+#define GPIO48_MAGICIAN_UNKNOWN 48
+#define GPIO56_MAGICIAN_UNKNOWN 56
+#define GPIO57_MAGICIAN_CAM_RESET 57
+#define GPIO83_MAGICIAN_nIR_EN 83
+#define GPIO86_MAGICIAN_GSM_RESET 86
+#define GPIO87_MAGICIAN_GSM_SELECT 87
+#define GPIO90_MAGICIAN_KEY_CALENDAR 90
+#define GPIO91_MAGICIAN_KEY_CAMERA 91
+#define GPIO93_MAGICIAN_KEY_UP 93
+#define GPIO94_MAGICIAN_KEY_DOWN 94
+#define GPIO95_MAGICIAN_KEY_LEFT 95
+#define GPIO96_MAGICIAN_KEY_RIGHT 96
+#define GPIO97_MAGICIAN_KEY_ENTER 97
+#define GPIO98_MAGICIAN_KEY_RECORD 98
+#define GPIO99_MAGICIAN_HEADPHONE_IN 99
+#define GPIO100_MAGICIAN_KEY_VOL_UP 100
+#define GPIO101_MAGICIAN_KEY_VOL_DOWN 101
+#define GPIO102_MAGICIAN_KEY_PHONE 102
+#define GPIO103_MAGICIAN_LED_KP 103
+#define GPIO104_MAGICIAN_LCD_POWER_1 104
+#define GPIO105_MAGICIAN_LCD_POWER_2 105
+#define GPIO106_MAGICIAN_LCD_POWER_3 106
+#define GPIO107_MAGICIAN_DS1WM_IRQ 107
+#define GPIO108_MAGICIAN_GSM_READY 108
+#define GPIO114_MAGICIAN_UNKNOWN 114
+#define GPIO115_MAGICIAN_nPEN_IRQ 115
+#define GPIO116_MAGICIAN_nCAM_EN 116
+#define GPIO119_MAGICIAN_UNKNOWN 119
+#define GPIO120_MAGICIAN_UNKNOWN 120
+
+/*
+ * PXA GPIO alternate function mode & direction
+ */
+
+#define GPIO0_MAGICIAN_KEY_POWER_MD (0 | GPIO_IN)
+#define GPIO9_MAGICIAN_UNKNOWN_MD (9 | GPIO_IN)
+#define GPIO10_MAGICIAN_GSM_IRQ_MD (10 | GPIO_IN)
+#define GPIO11_MAGICIAN_GSM_OUT1_MD (11 | GPIO_OUT)
+#define GPIO13_MAGICIAN_CPLD_IRQ_MD (13 | GPIO_IN)
+#define GPIO18_MAGICIAN_UNKNOWN_MD (18 | GPIO_OUT)
+#define GPIO22_MAGICIAN_VIBRA_EN_MD (22 | GPIO_OUT)
+#define GPIO26_MAGICIAN_GSM_POWER_MD (26 | GPIO_OUT)
+#define GPIO27_MAGICIAN_USBC_PUEN_MD (27 | GPIO_OUT)
+#define GPIO30_MAGICIAN_nCHARGE_EN_MD (30 | GPIO_OUT)
+#define GPIO37_MAGICIAN_KEY_HANGUP_MD (37 | GPIO_OUT)
+#define GPIO38_MAGICIAN_KEY_CONTACTS_MD (38 | GPIO_OUT)
+#define GPIO40_MAGICIAN_GSM_OUT2_MD (40 | GPIO_OUT)
+#define GPIO48_MAGICIAN_UNKNOWN_MD (48 | GPIO_OUT)
+#define GPIO56_MAGICIAN_UNKNOWN_MD (56 | GPIO_OUT)
+#define GPIO57_MAGICIAN_CAM_RESET_MD (57 | GPIO_OUT)
+#define GPIO83_MAGICIAN_nIR_EN_MD (83 | GPIO_OUT)
+#define GPIO86_MAGICIAN_GSM_RESET_MD (86 | GPIO_OUT)
+#define GPIO87_MAGICIAN_GSM_SELECT_MD (87 | GPIO_OUT)
+#define GPIO90_MAGICIAN_KEY_CALENDAR_MD (90 | GPIO_OUT)
+#define GPIO91_MAGICIAN_KEY_CAMERA_MD (91 | GPIO_OUT)
+#define GPIO93_MAGICIAN_KEY_UP_MD (93 | GPIO_IN)
+#define GPIO94_MAGICIAN_KEY_DOWN_MD (94 | GPIO_IN)
+#define GPIO95_MAGICIAN_KEY_LEFT_MD (95 | GPIO_IN)
+#define GPIO96_MAGICIAN_KEY_RIGHT_MD (96 | GPIO_IN)
+#define GPIO97_MAGICIAN_KEY_ENTER_MD (97 | GPIO_IN)
+#define GPIO98_MAGICIAN_KEY_RECORD_MD (98 | GPIO_IN)
+#define GPIO99_MAGICIAN_HEADPHONE_IN_MD (99 | GPIO_IN)
+#define GPIO100_MAGICIAN_KEY_VOL_UP_MD (100 | GPIO_IN)
+#define GPIO101_MAGICIAN_KEY_VOL_DOWN_MD (101 | GPIO_IN)
+#define GPIO102_MAGICIAN_KEY_PHONE_MD (102 | GPIO_IN)
+#define GPIO103_MAGICIAN_LED_KP_MD (103 | GPIO_OUT)
+#define GPIO104_MAGICIAN_LCD_POWER_1_MD (104 | GPIO_OUT)
+#define GPIO105_MAGICIAN_LCD_POWER_2_MD (105 | GPIO_OUT)
+#define GPIO106_MAGICIAN_LCD_POWER_3_MD (106 | GPIO_OUT)
+#define GPIO107_MAGICIAN_DS1WM_IRQ_MD (107 | GPIO_IN)
+#define GPIO108_MAGICIAN_GSM_READY_MD (108 | GPIO_IN)
+#define GPIO114_MAGICIAN_UNKNOWN_MD (114 | GPIO_OUT)
+#define GPIO115_MAGICIAN_nPEN_IRQ_MD (115 | GPIO_IN)
+#define GPIO116_MAGICIAN_nCAM_EN_MD (116 | GPIO_OUT)
+#define GPIO119_MAGICIAN_UNKNOWN_MD (119 | GPIO_OUT)
+#define GPIO120_MAGICIAN_UNKNOWN_MD (120 | GPIO_OUT)
+
+#endif /* _MAGICIAN_H_ */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa300.h b/include/asm-arm/arch-pxa/mfp-pxa300.h
index a209966..bb41031 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa300.h
+++ b/include/asm-arm/arch-pxa/mfp-pxa300.h
@@ -16,6 +16,7 @@
#define __ASM_ARCH_MFP_PXA300_H
#include <asm/arch/mfp.h>
+#include <asm/arch/mfp-pxa3xx.h>
/* GPIO */
#define GPIO46_GPIO MFP_CFG(GPIO46, AF1)
diff --git a/include/asm-arm/arch-pxa/mfp-pxa320.h b/include/asm-arm/arch-pxa/mfp-pxa320.h
index 52deedc..576aa46 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa320.h
+++ b/include/asm-arm/arch-pxa/mfp-pxa320.h
@@ -16,6 +16,7 @@
#define __ASM_ARCH_MFP_PXA320_H
#include <asm/arch/mfp.h>
+#include <asm/arch/mfp-pxa3xx.h>
/* GPIO */
#define GPIO46_GPIO MFP_CFG(GPIO46, AF0)
diff --git a/include/asm-arm/arch-pxa/mfp-pxa3xx.h b/include/asm-arm/arch-pxa/mfp-pxa3xx.h
new file mode 100644
index 0000000..1f6b35c
--- /dev/null
+++ b/include/asm-arm/arch-pxa/mfp-pxa3xx.h
@@ -0,0 +1,252 @@
+#ifndef __ASM_ARCH_MFP_PXA3XX_H
+#define __ASM_ARCH_MFP_PXA3XX_H
+
+#define MFPR_BASE (0x40e10000)
+#define MFPR_SIZE (PAGE_SIZE)
+
+/* MFPR register bit definitions */
+#define MFPR_PULL_SEL (0x1 << 15)
+#define MFPR_PULLUP_EN (0x1 << 14)
+#define MFPR_PULLDOWN_EN (0x1 << 13)
+#define MFPR_SLEEP_SEL (0x1 << 9)
+#define MFPR_SLEEP_OE_N (0x1 << 7)
+#define MFPR_EDGE_CLEAR (0x1 << 6)
+#define MFPR_EDGE_FALL_EN (0x1 << 5)
+#define MFPR_EDGE_RISE_EN (0x1 << 4)
+
+#define MFPR_SLEEP_DATA(x) ((x) << 8)
+#define MFPR_DRIVE(x) (((x) & 0x7) << 10)
+#define MFPR_AF_SEL(x) (((x) & 0x7) << 0)
+
+#define MFPR_EDGE_NONE (0)
+#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN)
+#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN)
+#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL)
+
+/*
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel
+ * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15)
+ *
+ * Input 0 X(0) X(0) X(0) 0
+ * Drive 0 0 0 0 X(1) 0
+ * Drive 1 0 1 X(1) 0 0
+ * Pull hi (1) 1 X(1) 1 0 0
+ * Pull lo (0) 1 X(0) 0 1 0
+ * Z (float) 1 X(0) 0 0 0
+ */
+#define MFPR_LPM_INPUT (0)
+#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
+#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
+#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N)
+#define MFPR_LPM_MASK (0xe080)
+
+/*
+ * The pullup and pulldown state of the MFP pin at run mode is by default
+ * determined by the selected alternate function. In case that some buggy
+ * devices need to override this default behavior, the definitions below
+ * indicates the setting of corresponding MFPR bits
+ *
+ * Definition pull_sel pullup_en pulldown_en
+ * MFPR_PULL_NONE 0 0 0
+ * MFPR_PULL_LOW 1 0 1
+ * MFPR_PULL_HIGH 1 1 0
+ * MFPR_PULL_BOTH 1 1 1
+ */
+#define MFPR_PULL_NONE (0)
+#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
+#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN)
+#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN)
+
+/* PXA3xx common MFP configurations - processor specific ones defined
+ * in mfp-pxa300.h and mfp-pxa320.h
+ */
+#define GPIO0_GPIO MFP_CFG(GPIO0, AF0)
+#define GPIO1_GPIO MFP_CFG(GPIO1, AF0)
+#define GPIO2_GPIO MFP_CFG(GPIO2, AF0)
+#define GPIO3_GPIO MFP_CFG(GPIO3, AF0)
+#define GPIO4_GPIO MFP_CFG(GPIO4, AF0)
+#define GPIO5_GPIO MFP_CFG(GPIO5, AF0)
+#define GPIO6_GPIO MFP_CFG(GPIO6, AF0)
+#define GPIO7_GPIO MFP_CFG(GPIO7, AF0)
+#define GPIO8_GPIO MFP_CFG(GPIO8, AF0)
+#define GPIO9_GPIO MFP_CFG(GPIO9, AF0)
+#define GPIO10_GPIO MFP_CFG(GPIO10, AF0)
+#define GPIO11_GPIO MFP_CFG(GPIO11, AF0)
+#define GPIO12_GPIO MFP_CFG(GPIO12, AF0)
+#define GPIO13_GPIO MFP_CFG(GPIO13, AF0)
+#define GPIO14_GPIO MFP_CFG(GPIO14, AF0)
+#define GPIO15_GPIO MFP_CFG(GPIO15, AF0)
+#define GPIO16_GPIO MFP_CFG(GPIO16, AF0)
+#define GPIO17_GPIO MFP_CFG(GPIO17, AF0)
+#define GPIO18_GPIO MFP_CFG(GPIO18, AF0)
+#define GPIO19_GPIO MFP_CFG(GPIO19, AF0)
+#define GPIO20_GPIO MFP_CFG(GPIO20, AF0)
+#define GPIO21_GPIO MFP_CFG(GPIO21, AF0)
+#define GPIO22_GPIO MFP_CFG(GPIO22, AF0)
+#define GPIO23_GPIO MFP_CFG(GPIO23, AF0)
+#define GPIO24_GPIO MFP_CFG(GPIO24, AF0)
+#define GPIO25_GPIO MFP_CFG(GPIO25, AF0)
+#define GPIO26_GPIO MFP_CFG(GPIO26, AF0)
+#define GPIO27_GPIO MFP_CFG(GPIO27, AF0)
+#define GPIO28_GPIO MFP_CFG(GPIO28, AF0)
+#define GPIO29_GPIO MFP_CFG(GPIO29, AF0)
+#define GPIO30_GPIO MFP_CFG(GPIO30, AF0)
+#define GPIO31_GPIO MFP_CFG(GPIO31, AF0)
+#define GPIO32_GPIO MFP_CFG(GPIO32, AF0)
+#define GPIO33_GPIO MFP_CFG(GPIO33, AF0)
+#define GPIO34_GPIO MFP_CFG(GPIO34, AF0)
+#define GPIO35_GPIO MFP_CFG(GPIO35, AF0)
+#define GPIO36_GPIO MFP_CFG(GPIO36, AF0)
+#define GPIO37_GPIO MFP_CFG(GPIO37, AF0)
+#define GPIO38_GPIO MFP_CFG(GPIO38, AF0)
+#define GPIO39_GPIO MFP_CFG(GPIO39, AF0)
+#define GPIO40_GPIO MFP_CFG(GPIO40, AF0)
+#define GPIO41_GPIO MFP_CFG(GPIO41, AF0)
+#define GPIO42_GPIO MFP_CFG(GPIO42, AF0)
+#define GPIO43_GPIO MFP_CFG(GPIO43, AF0)
+#define GPIO44_GPIO MFP_CFG(GPIO44, AF0)
+#define GPIO45_GPIO MFP_CFG(GPIO45, AF0)
+
+#define GPIO47_GPIO MFP_CFG(GPIO47, AF0)
+#define GPIO48_GPIO MFP_CFG(GPIO48, AF0)
+
+#define GPIO53_GPIO MFP_CFG(GPIO53, AF0)
+#define GPIO54_GPIO MFP_CFG(GPIO54, AF0)
+#define GPIO55_GPIO MFP_CFG(GPIO55, AF0)
+
+#define GPIO57_GPIO MFP_CFG(GPIO57, AF0)
+
+#define GPIO63_GPIO MFP_CFG(GPIO63, AF0)
+#define GPIO64_GPIO MFP_CFG(GPIO64, AF0)
+#define GPIO65_GPIO MFP_CFG(GPIO65, AF0)
+#define GPIO66_GPIO MFP_CFG(GPIO66, AF0)
+#define GPIO67_GPIO MFP_CFG(GPIO67, AF0)
+#define GPIO68_GPIO MFP_CFG(GPIO68, AF0)
+#define GPIO69_GPIO MFP_CFG(GPIO69, AF0)
+#define GPIO70_GPIO MFP_CFG(GPIO70, AF0)
+#define GPIO71_GPIO MFP_CFG(GPIO71, AF0)
+#define GPIO72_GPIO MFP_CFG(GPIO72, AF0)
+#define GPIO73_GPIO MFP_CFG(GPIO73, AF0)
+#define GPIO74_GPIO MFP_CFG(GPIO74, AF0)
+#define GPIO75_GPIO MFP_CFG(GPIO75, AF0)
+#define GPIO76_GPIO MFP_CFG(GPIO76, AF0)
+#define GPIO77_GPIO MFP_CFG(GPIO77, AF0)
+#define GPIO78_GPIO MFP_CFG(GPIO78, AF0)
+#define GPIO79_GPIO MFP_CFG(GPIO79, AF0)
+#define GPIO80_GPIO MFP_CFG(GPIO80, AF0)
+#define GPIO81_GPIO MFP_CFG(GPIO81, AF0)
+#define GPIO82_GPIO MFP_CFG(GPIO82, AF0)
+#define GPIO83_GPIO MFP_CFG(GPIO83, AF0)
+#define GPIO84_GPIO MFP_CFG(GPIO84, AF0)
+#define GPIO85_GPIO MFP_CFG(GPIO85, AF0)
+#define GPIO86_GPIO MFP_CFG(GPIO86, AF0)
+#define GPIO87_GPIO MFP_CFG(GPIO87, AF0)
+#define GPIO88_GPIO MFP_CFG(GPIO88, AF0)
+#define GPIO89_GPIO MFP_CFG(GPIO89, AF0)
+#define GPIO90_GPIO MFP_CFG(GPIO90, AF0)
+#define GPIO91_GPIO MFP_CFG(GPIO91, AF0)
+#define GPIO92_GPIO MFP_CFG(GPIO92, AF0)
+#define GPIO93_GPIO MFP_CFG(GPIO93, AF0)
+#define GPIO94_GPIO MFP_CFG(GPIO94, AF0)
+#define GPIO95_GPIO MFP_CFG(GPIO95, AF0)
+#define GPIO96_GPIO MFP_CFG(GPIO96, AF0)
+#define GPIO97_GPIO MFP_CFG(GPIO97, AF0)
+#define GPIO98_GPIO MFP_CFG(GPIO98, AF0)
+#define GPIO99_GPIO MFP_CFG(GPIO99, AF0)
+#define GPIO100_GPIO MFP_CFG(GPIO100, AF0)
+#define GPIO101_GPIO MFP_CFG(GPIO101, AF0)
+#define GPIO102_GPIO MFP_CFG(GPIO102, AF0)
+#define GPIO103_GPIO MFP_CFG(GPIO103, AF0)
+#define GPIO104_GPIO MFP_CFG(GPIO104, AF0)
+#define GPIO105_GPIO MFP_CFG(GPIO105, AF0)
+#define GPIO106_GPIO MFP_CFG(GPIO106, AF0)
+#define GPIO107_GPIO MFP_CFG(GPIO107, AF0)
+#define GPIO108_GPIO MFP_CFG(GPIO108, AF0)
+#define GPIO109_GPIO MFP_CFG(GPIO109, AF0)
+#define GPIO110_GPIO MFP_CFG(GPIO110, AF0)
+#define GPIO111_GPIO MFP_CFG(GPIO111, AF0)
+#define GPIO112_GPIO MFP_CFG(GPIO112, AF0)
+#define GPIO113_GPIO MFP_CFG(GPIO113, AF0)
+#define GPIO114_GPIO MFP_CFG(GPIO114, AF0)
+#define GPIO115_GPIO MFP_CFG(GPIO115, AF0)
+#define GPIO116_GPIO MFP_CFG(GPIO116, AF0)
+#define GPIO117_GPIO MFP_CFG(GPIO117, AF0)
+#define GPIO118_GPIO MFP_CFG(GPIO118, AF0)
+#define GPIO119_GPIO MFP_CFG(GPIO119, AF0)
+#define GPIO120_GPIO MFP_CFG(GPIO120, AF0)
+#define GPIO121_GPIO MFP_CFG(GPIO121, AF0)
+#define GPIO122_GPIO MFP_CFG(GPIO122, AF0)
+#define GPIO123_GPIO MFP_CFG(GPIO123, AF0)
+#define GPIO124_GPIO MFP_CFG(GPIO124, AF0)
+#define GPIO125_GPIO MFP_CFG(GPIO125, AF0)
+#define GPIO126_GPIO MFP_CFG(GPIO126, AF0)
+#define GPIO127_GPIO MFP_CFG(GPIO127, AF0)
+
+#define GPIO0_2_GPIO MFP_CFG(GPIO0_2, AF0)
+#define GPIO1_2_GPIO MFP_CFG(GPIO1_2, AF0)
+#define GPIO2_2_GPIO MFP_CFG(GPIO2_2, AF0)
+#define GPIO3_2_GPIO MFP_CFG(GPIO3_2, AF0)
+#define GPIO4_2_GPIO MFP_CFG(GPIO4_2, AF0)
+#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0)
+#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0)
+
+/*
+ * each MFP pin will have a MFPR register, since the offset of the
+ * register varies between processors, the processor specific code
+ * should initialize the pin offsets by pxa3xx_mfp_init_addr()
+ *
+ * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map"
+ * structure, which represents a range of MFP pins from "start" to
+ * "end", with the offset begining at "offset", to define a single
+ * pin, let "end" = -1
+ *
+ * use
+ *
+ * MFP_ADDR_X() to define a range of pins
+ * MFP_ADDR() to define a single pin
+ * MFP_ADDR_END to signal the end of pin offset definitions
+ */
+struct pxa3xx_mfp_addr_map {
+ unsigned int start;
+ unsigned int end;
+ unsigned long offset;
+};
+
+#define MFP_ADDR_X(start, end, offset) \
+ { MFP_PIN_##start, MFP_PIN_##end, offset }
+
+#define MFP_ADDR(pin, offset) \
+ { MFP_PIN_##pin, -1, offset }
+
+#define MFP_ADDR_END { MFP_PIN_INVALID, 0 }
+
+/*
+ * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access
+ * to the MFPR register
+ */
+unsigned long pxa3xx_mfp_read(int mfp);
+void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val);
+
+/*
+ * pxa3xx_mfp_config - configure the MFPR registers
+ *
+ * used by board specific initialization code
+ */
+void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num);
+
+/*
+ * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin
+ * index and MFPR register offset
+ *
+ * used by processor specific code
+ */
+void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *);
+void __init pxa3xx_init_mfp(void);
+#endif /* __ASM_ARCH_MFP_PXA3XX_H */
diff --git a/include/asm-arm/arch-pxa/mfp.h b/include/asm-arm/arch-pxa/mfp.h
index 03c508d..02f6157 100644
--- a/include/asm-arm/arch-pxa/mfp.h
+++ b/include/asm-arm/arch-pxa/mfp.h
@@ -16,9 +16,6 @@
#ifndef __ASM_ARCH_MFP_H
#define __ASM_ARCH_MFP_H
-#define MFPR_BASE (0x40e10000)
-#define MFPR_SIZE (PAGE_SIZE)
-
#define mfp_to_gpio(m) ((m) % 128)
/* list of all the configurable MFP pins */
@@ -217,114 +214,21 @@
};
/*
- * Table that determines the low power modes outputs, with actual settings
- * used in parentheses for don't-care values. Except for the float output,
- * the configured driven and pulled levels match, so if there is a need for
- * non-LPM pulled output, the same configuration could probably be used.
- *
- * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel
- * (bit 7) (bit 8) (bit 14d) (bit 13d)
- *
- * Drive 0 0 0 0 X (1) 0
- * Drive 1 0 1 X (1) 0 0
- * Pull hi (1) 1 X(1) 1 0 0
- * Pull lo (0) 1 X(0) 0 1 0
- * Z (float) 1 X(0) 0 0 0
- */
-#define MFP_LPM_DRIVE_LOW 0x8
-#define MFP_LPM_DRIVE_HIGH 0x6
-#define MFP_LPM_PULL_HIGH 0x7
-#define MFP_LPM_PULL_LOW 0x9
-#define MFP_LPM_FLOAT 0x1
-#define MFP_LPM_PULL_NEITHER 0x0
-
-/*
- * The pullup and pulldown state of the MFP pin is by default determined by
- * selected alternate function. In case some buggy devices need to override
- * this default behavior, pxa3xx_mfp_set_pull() can be invoked with one of
- * the following definition as the parameter.
- *
- * Definition pull_sel pullup_en pulldown_en
- * MFP_PULL_HIGH 1 1 0
- * MFP_PULL_LOW 1 0 1
- * MFP_PULL_BOTH 1 1 1
- * MFP_PULL_NONE 1 0 0
- * MFP_PULL_DEFAULT 0 X X
- *
- * NOTE: pxa3xx_mfp_set_pull() will modify the PULLUP_EN and PULLDOWN_EN
- * bits, which will cause potential conflicts with the low power mode
- * setting, device drivers should take care of this
- */
-#define MFP_PULL_BOTH (0x7u)
-#define MFP_PULL_HIGH (0x6u)
-#define MFP_PULL_LOW (0x5u)
-#define MFP_PULL_NONE (0x4u)
-#define MFP_PULL_DEFAULT (0x0u)
-
-#define MFP_AF0 (0)
-#define MFP_AF1 (1)
-#define MFP_AF2 (2)
-#define MFP_AF3 (3)
-#define MFP_AF4 (4)
-#define MFP_AF5 (5)
-#define MFP_AF6 (6)
-#define MFP_AF7 (7)
-
-#define MFP_DS01X (0)
-#define MFP_DS02X (1)
-#define MFP_DS03X (2)
-#define MFP_DS04X (3)
-#define MFP_DS06X (4)
-#define MFP_DS08X (5)
-#define MFP_DS10X (6)
-#define MFP_DS12X (7)
-
-#define MFP_EDGE_BOTH 0x3
-#define MFP_EDGE_RISE 0x2
-#define MFP_EDGE_FALL 0x1
-#define MFP_EDGE_NONE 0x0
-
-#define MFPR_AF_MASK 0x0007
-#define MFPR_DRV_MASK 0x1c00
-#define MFPR_RDH_MASK 0x0200
-#define MFPR_LPM_MASK 0xe180
-#define MFPR_PULL_MASK 0xe000
-#define MFPR_EDGE_MASK 0x0070
-
-#define MFPR_ALT_OFFSET 0
-#define MFPR_ERE_OFFSET 4
-#define MFPR_EFE_OFFSET 5
-#define MFPR_EC_OFFSET 6
-#define MFPR_SON_OFFSET 7
-#define MFPR_SD_OFFSET 8
-#define MFPR_SS_OFFSET 9
-#define MFPR_DRV_OFFSET 10
-#define MFPR_PD_OFFSET 13
-#define MFPR_PU_OFFSET 14
-#define MFPR_PS_OFFSET 15
-
-#define MFPR(af, drv, rdh, lpm, edge) \
- (((af) & 0x7) | (((drv) & 0x7) << 10) |\
- (((rdh) & 0x1) << 9) |\
- (((lpm) & 0x3) << 7) |\
- (((lpm) & 0x4) << 12)|\
- (((lpm) & 0x8) << 10)|\
- ((!(edge)) << 6) |\
- (((edge) & 0x1) << 5) |\
- (((edge) & 0x2) << 3))
-
-/*
* a possible MFP configuration is represented by a 32-bit integer
- * bit 0..15 - MFPR value (16-bit)
- * bit 16..31 - mfp pin index (used to obtain the MFPR offset)
+ *
+ * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum)
+ * bit 10..12 - Alternate Function Selection
+ * bit 13..15 - Drive Strength
+ * bit 16..18 - Low Power Mode State
+ * bit 19..20 - Low Power Mode Edge Detection
+ * bit 21..22 - Run Mode Pull State
*
* to facilitate the definition, the following macros are provided
*
- * MFPR_DEFAULT - default MFPR value, with
+ * MFP_CFG_DEFAULT - default MFP configuration value, with
* alternate function = 0,
- * drive strength = fast 1mA (MFP_DS01X)
+ * drive strength = fast 3mA (MFP_DS03X)
* low power mode = default
- * release dalay hold = false (RDH bit)
* edge detection = none
*
* MFP_CFG - default MFPR value with alternate function
@@ -334,251 +238,74 @@
* low power mode
* MFP_CFG_X - default MFPR value with alternate function,
* pin drive strength and low power mode
- *
- * use
- *
- * MFP_CFG_PIN - to get the MFP pin index
- * MFP_CFG_VAL - to get the corresponding MFPR value
*/
-typedef uint32_t mfp_cfg_t;
+typedef unsigned long mfp_cfg_t;
-#define MFP_CFG_PIN(mfp_cfg) (((mfp_cfg) >> 16) & 0xffff)
-#define MFP_CFG_VAL(mfp_cfg) ((mfp_cfg) & 0xffff)
+#define MFP_PIN(x) ((x) & 0x3ff)
-/*
- * MFP register defaults to
- * drive strength fast 3mA (010'b)
- * edge detection logic disabled
- * alternate function 0
- */
-#define MFPR_DEFAULT (0x0840)
+#define MFP_AF0 (0x0 << 10)
+#define MFP_AF1 (0x1 << 10)
+#define MFP_AF2 (0x2 << 10)
+#define MFP_AF3 (0x3 << 10)
+#define MFP_AF4 (0x4 << 10)
+#define MFP_AF5 (0x5 << 10)
+#define MFP_AF6 (0x6 << 10)
+#define MFP_AF7 (0x7 << 10)
+#define MFP_AF_MASK (0x7 << 10)
+#define MFP_AF(x) (((x) >> 10) & 0x7)
+
+#define MFP_DS01X (0x0 << 13)
+#define MFP_DS02X (0x1 << 13)
+#define MFP_DS03X (0x2 << 13)
+#define MFP_DS04X (0x3 << 13)
+#define MFP_DS06X (0x4 << 13)
+#define MFP_DS08X (0x5 << 13)
+#define MFP_DS10X (0x6 << 13)
+#define MFP_DS13X (0x7 << 13)
+#define MFP_DS_MASK (0x7 << 13)
+#define MFP_DS(x) (((x) >> 13) & 0x7)
+
+#define MFP_LPM_INPUT (0x0 << 16)
+#define MFP_LPM_DRIVE_LOW (0x1 << 16)
+#define MFP_LPM_DRIVE_HIGH (0x2 << 16)
+#define MFP_LPM_PULL_LOW (0x3 << 16)
+#define MFP_LPM_PULL_HIGH (0x4 << 16)
+#define MFP_LPM_FLOAT (0x5 << 16)
+#define MFP_LPM_STATE_MASK (0x7 << 16)
+#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7)
+
+#define MFP_LPM_EDGE_NONE (0x0 << 19)
+#define MFP_LPM_EDGE_RISE (0x1 << 19)
+#define MFP_LPM_EDGE_FALL (0x2 << 19)
+#define MFP_LPM_EDGE_BOTH (0x3 << 19)
+#define MFP_LPM_EDGE_MASK (0x3 << 19)
+#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3)
+
+#define MFP_PULL_NONE (0x0 << 21)
+#define MFP_PULL_LOW (0x1 << 21)
+#define MFP_PULL_HIGH (0x2 << 21)
+#define MFP_PULL_BOTH (0x3 << 21)
+#define MFP_PULL_MASK (0x3 << 21)
+#define MFP_PULL(x) (((x) >> 21) & 0x3)
+
+#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\
+ MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
#define MFP_CFG(pin, af) \
- ((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af))
+ ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
#define MFP_CFG_DRV(pin, af, drv) \
- ((MFP_PIN_##pin << 16) | (MFPR_DEFAULT & ~MFPR_DRV_MASK) |\
- ((MFP_##drv) << 10) | (MFP_##af))
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
#define MFP_CFG_LPM(pin, af, lpm) \
- ((MFP_PIN_##pin << 16) | (MFPR_DEFAULT & ~MFPR_LPM_MASK) |\
- (((MFP_LPM_##lpm) & 0x3) << 7) |\
- (((MFP_LPM_##lpm) & 0x4) << 12) |\
- (((MFP_LPM_##lpm) & 0x8) << 10) |\
- (MFP_##af))
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
#define MFP_CFG_X(pin, af, drv, lpm) \
- ((MFP_PIN_##pin << 16) |\
- (MFPR_DEFAULT & ~(MFPR_DRV_MASK | MFPR_LPM_MASK)) |\
- ((MFP_##drv) << 10) | (MFP_##af) |\
- (((MFP_LPM_##lpm) & 0x3) << 7) |\
- (((MFP_LPM_##lpm) & 0x4) << 12) |\
- (((MFP_LPM_##lpm) & 0x8) << 10))
-
-/* common MFP configurations - processor specific ones defined
- * in mfp-pxa3xx.h
- */
-#define GPIO0_GPIO MFP_CFG(GPIO0, AF0)
-#define GPIO1_GPIO MFP_CFG(GPIO1, AF0)
-#define GPIO2_GPIO MFP_CFG(GPIO2, AF0)
-#define GPIO3_GPIO MFP_CFG(GPIO3, AF0)
-#define GPIO4_GPIO MFP_CFG(GPIO4, AF0)
-#define GPIO5_GPIO MFP_CFG(GPIO5, AF0)
-#define GPIO6_GPIO MFP_CFG(GPIO6, AF0)
-#define GPIO7_GPIO MFP_CFG(GPIO7, AF0)
-#define GPIO8_GPIO MFP_CFG(GPIO8, AF0)
-#define GPIO9_GPIO MFP_CFG(GPIO9, AF0)
-#define GPIO10_GPIO MFP_CFG(GPIO10, AF0)
-#define GPIO11_GPIO MFP_CFG(GPIO11, AF0)
-#define GPIO12_GPIO MFP_CFG(GPIO12, AF0)
-#define GPIO13_GPIO MFP_CFG(GPIO13, AF0)
-#define GPIO14_GPIO MFP_CFG(GPIO14, AF0)
-#define GPIO15_GPIO MFP_CFG(GPIO15, AF0)
-#define GPIO16_GPIO MFP_CFG(GPIO16, AF0)
-#define GPIO17_GPIO MFP_CFG(GPIO17, AF0)
-#define GPIO18_GPIO MFP_CFG(GPIO18, AF0)
-#define GPIO19_GPIO MFP_CFG(GPIO19, AF0)
-#define GPIO20_GPIO MFP_CFG(GPIO20, AF0)
-#define GPIO21_GPIO MFP_CFG(GPIO21, AF0)
-#define GPIO22_GPIO MFP_CFG(GPIO22, AF0)
-#define GPIO23_GPIO MFP_CFG(GPIO23, AF0)
-#define GPIO24_GPIO MFP_CFG(GPIO24, AF0)
-#define GPIO25_GPIO MFP_CFG(GPIO25, AF0)
-#define GPIO26_GPIO MFP_CFG(GPIO26, AF0)
-#define GPIO27_GPIO MFP_CFG(GPIO27, AF0)
-#define GPIO28_GPIO MFP_CFG(GPIO28, AF0)
-#define GPIO29_GPIO MFP_CFG(GPIO29, AF0)
-#define GPIO30_GPIO MFP_CFG(GPIO30, AF0)
-#define GPIO31_GPIO MFP_CFG(GPIO31, AF0)
-#define GPIO32_GPIO MFP_CFG(GPIO32, AF0)
-#define GPIO33_GPIO MFP_CFG(GPIO33, AF0)
-#define GPIO34_GPIO MFP_CFG(GPIO34, AF0)
-#define GPIO35_GPIO MFP_CFG(GPIO35, AF0)
-#define GPIO36_GPIO MFP_CFG(GPIO36, AF0)
-#define GPIO37_GPIO MFP_CFG(GPIO37, AF0)
-#define GPIO38_GPIO MFP_CFG(GPIO38, AF0)
-#define GPIO39_GPIO MFP_CFG(GPIO39, AF0)
-#define GPIO40_GPIO MFP_CFG(GPIO40, AF0)
-#define GPIO41_GPIO MFP_CFG(GPIO41, AF0)
-#define GPIO42_GPIO MFP_CFG(GPIO42, AF0)
-#define GPIO43_GPIO MFP_CFG(GPIO43, AF0)
-#define GPIO44_GPIO MFP_CFG(GPIO44, AF0)
-#define GPIO45_GPIO MFP_CFG(GPIO45, AF0)
-
-#define GPIO47_GPIO MFP_CFG(GPIO47, AF0)
-#define GPIO48_GPIO MFP_CFG(GPIO48, AF0)
-
-#define GPIO53_GPIO MFP_CFG(GPIO53, AF0)
-#define GPIO54_GPIO MFP_CFG(GPIO54, AF0)
-#define GPIO55_GPIO MFP_CFG(GPIO55, AF0)
-
-#define GPIO57_GPIO MFP_CFG(GPIO57, AF0)
-
-#define GPIO63_GPIO MFP_CFG(GPIO63, AF0)
-#define GPIO64_GPIO MFP_CFG(GPIO64, AF0)
-#define GPIO65_GPIO MFP_CFG(GPIO65, AF0)
-#define GPIO66_GPIO MFP_CFG(GPIO66, AF0)
-#define GPIO67_GPIO MFP_CFG(GPIO67, AF0)
-#define GPIO68_GPIO MFP_CFG(GPIO68, AF0)
-#define GPIO69_GPIO MFP_CFG(GPIO69, AF0)
-#define GPIO70_GPIO MFP_CFG(GPIO70, AF0)
-#define GPIO71_GPIO MFP_CFG(GPIO71, AF0)
-#define GPIO72_GPIO MFP_CFG(GPIO72, AF0)
-#define GPIO73_GPIO MFP_CFG(GPIO73, AF0)
-#define GPIO74_GPIO MFP_CFG(GPIO74, AF0)
-#define GPIO75_GPIO MFP_CFG(GPIO75, AF0)
-#define GPIO76_GPIO MFP_CFG(GPIO76, AF0)
-#define GPIO77_GPIO MFP_CFG(GPIO77, AF0)
-#define GPIO78_GPIO MFP_CFG(GPIO78, AF0)
-#define GPIO79_GPIO MFP_CFG(GPIO79, AF0)
-#define GPIO80_GPIO MFP_CFG(GPIO80, AF0)
-#define GPIO81_GPIO MFP_CFG(GPIO81, AF0)
-#define GPIO82_GPIO MFP_CFG(GPIO82, AF0)
-#define GPIO83_GPIO MFP_CFG(GPIO83, AF0)
-#define GPIO84_GPIO MFP_CFG(GPIO84, AF0)
-#define GPIO85_GPIO MFP_CFG(GPIO85, AF0)
-#define GPIO86_GPIO MFP_CFG(GPIO86, AF0)
-#define GPIO87_GPIO MFP_CFG(GPIO87, AF0)
-#define GPIO88_GPIO MFP_CFG(GPIO88, AF0)
-#define GPIO89_GPIO MFP_CFG(GPIO89, AF0)
-#define GPIO90_GPIO MFP_CFG(GPIO90, AF0)
-#define GPIO91_GPIO MFP_CFG(GPIO91, AF0)
-#define GPIO92_GPIO MFP_CFG(GPIO92, AF0)
-#define GPIO93_GPIO MFP_CFG(GPIO93, AF0)
-#define GPIO94_GPIO MFP_CFG(GPIO94, AF0)
-#define GPIO95_GPIO MFP_CFG(GPIO95, AF0)
-#define GPIO96_GPIO MFP_CFG(GPIO96, AF0)
-#define GPIO97_GPIO MFP_CFG(GPIO97, AF0)
-#define GPIO98_GPIO MFP_CFG(GPIO98, AF0)
-#define GPIO99_GPIO MFP_CFG(GPIO99, AF0)
-#define GPIO100_GPIO MFP_CFG(GPIO100, AF0)
-#define GPIO101_GPIO MFP_CFG(GPIO101, AF0)
-#define GPIO102_GPIO MFP_CFG(GPIO102, AF0)
-#define GPIO103_GPIO MFP_CFG(GPIO103, AF0)
-#define GPIO104_GPIO MFP_CFG(GPIO104, AF0)
-#define GPIO105_GPIO MFP_CFG(GPIO105, AF0)
-#define GPIO106_GPIO MFP_CFG(GPIO106, AF0)
-#define GPIO107_GPIO MFP_CFG(GPIO107, AF0)
-#define GPIO108_GPIO MFP_CFG(GPIO108, AF0)
-#define GPIO109_GPIO MFP_CFG(GPIO109, AF0)
-#define GPIO110_GPIO MFP_CFG(GPIO110, AF0)
-#define GPIO111_GPIO MFP_CFG(GPIO111, AF0)
-#define GPIO112_GPIO MFP_CFG(GPIO112, AF0)
-#define GPIO113_GPIO MFP_CFG(GPIO113, AF0)
-#define GPIO114_GPIO MFP_CFG(GPIO114, AF0)
-#define GPIO115_GPIO MFP_CFG(GPIO115, AF0)
-#define GPIO116_GPIO MFP_CFG(GPIO116, AF0)
-#define GPIO117_GPIO MFP_CFG(GPIO117, AF0)
-#define GPIO118_GPIO MFP_CFG(GPIO118, AF0)
-#define GPIO119_GPIO MFP_CFG(GPIO119, AF0)
-#define GPIO120_GPIO MFP_CFG(GPIO120, AF0)
-#define GPIO121_GPIO MFP_CFG(GPIO121, AF0)
-#define GPIO122_GPIO MFP_CFG(GPIO122, AF0)
-#define GPIO123_GPIO MFP_CFG(GPIO123, AF0)
-#define GPIO124_GPIO MFP_CFG(GPIO124, AF0)
-#define GPIO125_GPIO MFP_CFG(GPIO125, AF0)
-#define GPIO126_GPIO MFP_CFG(GPIO126, AF0)
-#define GPIO127_GPIO MFP_CFG(GPIO127, AF0)
-
-#define GPIO0_2_GPIO MFP_CFG(GPIO0_2, AF0)
-#define GPIO1_2_GPIO MFP_CFG(GPIO1_2, AF0)
-#define GPIO2_2_GPIO MFP_CFG(GPIO2_2, AF0)
-#define GPIO3_2_GPIO MFP_CFG(GPIO3_2, AF0)
-#define GPIO4_2_GPIO MFP_CFG(GPIO4_2, AF0)
-#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0)
-#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0)
-
-/*
- * each MFP pin will have a MFPR register, since the offset of the
- * register varies between processors, the processor specific code
- * should initialize the pin offsets by pxa3xx_mfp_init_addr()
- *
- * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map"
- * structure, which represents a range of MFP pins from "start" to
- * "end", with the offset begining at "offset", to define a single
- * pin, let "end" = -1
- *
- * use
- *
- * MFP_ADDR_X() to define a range of pins
- * MFP_ADDR() to define a single pin
- * MFP_ADDR_END to signal the end of pin offset definitions
- */
-struct pxa3xx_mfp_addr_map {
- unsigned int start;
- unsigned int end;
- unsigned long offset;
-};
-
-#define MFP_ADDR_X(start, end, offset) \
- { MFP_PIN_##start, MFP_PIN_##end, offset }
-
-#define MFP_ADDR(pin, offset) \
- { MFP_PIN_##pin, -1, offset }
-
-#define MFP_ADDR_END { MFP_PIN_INVALID, 0 }
-
-struct pxa3xx_mfp_pin {
- unsigned long mfpr_off; /* MFPRxx register offset */
- unsigned long mfpr_val; /* MFPRxx register value */
-};
-
-/*
- * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access
- * to the MFPR register
- */
-unsigned long pxa3xx_mfp_read(int mfp);
-void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val);
-
-/*
- * pxa3xx_mfp_set_afds - set MFP alternate function and drive strength
- * pxa3xx_mfp_set_rdh - set MFP release delay hold on/off
- * pxa3xx_mfp_set_lpm - set MFP low power mode state
- * pxa3xx_mfp_set_edge - set MFP edge detection in low power mode
- *
- * use these functions to override/change the default configuration
- * done by pxa3xx_mfp_set_config(s)
- */
-void pxa3xx_mfp_set_afds(int mfp, int af, int ds);
-void pxa3xx_mfp_set_rdh(int mfp, int rdh);
-void pxa3xx_mfp_set_lpm(int mfp, int lpm);
-void pxa3xx_mfp_set_edge(int mfp, int edge);
-
-/*
- * pxa3xx_mfp_config - configure the MFPR registers
- *
- * used by board specific initialization code
- */
-void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num);
-
-/*
- * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin
- * index and MFPR register offset
- *
- * used by processor specific code
- */
-void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *);
-void __init pxa3xx_init_mfp(void);
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
#endif /* __ASM_ARCH_MFP_H */
diff --git a/include/asm-arm/arch-pxa/mmc.h b/include/asm-arm/arch-pxa/mmc.h
index ef4f570..6d1304c 100644
--- a/include/asm-arm/arch-pxa/mmc.h
+++ b/include/asm-arm/arch-pxa/mmc.h
@@ -17,5 +17,7 @@
};
extern void pxa_set_mci_info(struct pxamci_platform_data *info);
+extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info);
+extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info);
#endif
diff --git a/include/asm-arm/arch-pxa/pcm027.h b/include/asm-arm/arch-pxa/pcm027.h
new file mode 100644
index 0000000..7beae14
--- /dev/null
+++ b/include/asm-arm/arch-pxa/pcm027.h
@@ -0,0 +1,75 @@
+/*
+ * linux/include/asm-arm/arch-pxa/pcm027.h
+ *
+ * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * Definitions of CPU card resources only
+ */
+
+/* I2C RTC */
+#define PCM027_RTC_IRQ_GPIO 0
+#define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
+#define PCM027_RTC_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
+#define ADR_PCM027_RTC 0x51 /* I2C address */
+
+/* I2C EEPROM */
+#define ADR_PCM027_EEPROM 0x54 /* I2C address */
+
+/* Ethernet chip (SMSC91C111) */
+#define PCM027_ETH_IRQ_GPIO 52
+#define PCM027_ETH_IRQ IRQ_GPIO(PCM027_ETH_IRQ_GPIO)
+#define PCM027_ETH_IRQ_EDGE IRQ_TYPE_EDGE_RISING
+#define PCM027_ETH_PHYS PXA_CS5_PHYS
+#define PCM027_ETH_SIZE (1*1024*1024)
+
+/* CAN controller SJA1000 (unsupported yet) */
+#define PCM027_CAN_IRQ_GPIO 114
+#define PCM027_CAN_IRQ IRQ_GPIO(PCM027_CAN_IRQ_GPIO)
+#define PCM027_CAN_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
+#define PCM027_CAN_PHYS 0x22000000
+#define PCM027_CAN_SIZE 0x100
+
+/* SPI GPIO expander (unsupported yet) */
+#define PCM027_EGPIO_IRQ_GPIO 27
+#define PCM027_EGPIO_IRQ IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO)
+#define PCM027_EGPIO_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
+#define PCM027_EGPIO_CS 24
+/*
+ * TODO: Switch this pin from dedicated usage to GPIO if
+ * more than the MAX7301 device is connected to this SPI bus
+ */
+#define PCM027_EGPIO_CS_MODE GPIO24_SFRM_MD
+
+/* Flash memory */
+#define PCM027_FLASH_PHYS 0x00000000
+#define PCM027_FLASH_SIZE 0x02000000
+
+/* onboard LEDs connected to GPIO */
+#define PCM027_LED_CPU 90
+#define PCM027_LED_HEARD_BEAT 91
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own basebaord init function and call it from
+ * inside pcm027_init(). This example here is for the developmen board.
+ * Refer pcm990-baseboard.c
+ */
+extern void pcm990_baseboard_init(void);
diff --git a/include/asm-arm/arch-pxa/pcm990_baseboard.h b/include/asm-arm/arch-pxa/pcm990_baseboard.h
new file mode 100644
index 0000000..b699d0d
--- /dev/null
+++ b/include/asm-arm/arch-pxa/pcm990_baseboard.h
@@ -0,0 +1,275 @@
+/*
+ * include/asm-arm/arch-pxa/pcm990_baseboard.h
+ *
+ * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <asm/arch/pcm027.h>
+
+/*
+ * definitions relevant only when the PCM-990
+ * development base board is in use
+ */
+
+/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
+#define PCM990_CTRL_INT_IRQ_GPIO 9
+#define PCM990_CTRL_INT_IRQ IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO)
+#define PCM990_CTRL_INT_IRQ_EDGE IRQT_RISING
+#define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */
+#define PCM990_CTRL_BASE 0xea000000
+#define PCM990_CTRL_SIZE (1*1024*1024)
+
+#define PCM990_CTRL_PWR_IRQ_GPIO 14
+#define PCM990_CTRL_PWR_IRQ IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO)
+#define PCM990_CTRL_PWR_IRQ_EDGE IRQT_RISING
+
+/* visible CPLD (U7) registers */
+#define PCM990_CTRL_REG0 0x0000 /* RESET REGISTER */
+#define PCM990_CTRL_SYSRES 0x0001 /* System RESET REGISTER */
+#define PCM990_CTRL_RESOUT 0x0002 /* RESETOUT Enable REGISTER */
+#define PCM990_CTRL_RESGPIO 0x0004 /* RESETGPIO Enable REGISTER */
+
+#define PCM990_CTRL_REG1 0x0002 /* Power REGISTER */
+#define PCM990_CTRL_5VOFF 0x0001 /* Disable 5V Regulators */
+#define PCM990_CTRL_CANPWR 0x0004 /* Enable CANPWR ADUM */
+#define PCM990_CTRL_PM_5V 0x0008 /* Read 5V OK */
+
+#define PCM990_CTRL_REG2 0x0004 /* LED REGISTER */
+#define PCM990_CTRL_LEDPWR 0x0001 /* POWER LED enable */
+#define PCM990_CTRL_LEDBAS 0x0002 /* BASIS LED enable */
+#define PCM990_CTRL_LEDUSR 0x0004 /* USER LED enable */
+
+#define PCM990_CTRL_REG3 0x0006 /* LCD CTRL REGISTER 3 */
+#define PCM990_CTRL_LCDPWR 0x0001 /* RW LCD Power on */
+#define PCM990_CTRL_LCDON 0x0002 /* RW LCD Latch on */
+#define PCM990_CTRL_LCDPOS1 0x0004 /* RW POS 1 */
+#define PCM990_CTRL_LCDPOS2 0x0008 /* RW POS 2 */
+
+#define PCM990_CTRL_REG4 0x0008 /* MMC1 CTRL REGISTER 4 */
+#define PCM990_CTRL_MMC1PWR 0x0001 /* RW MMC1 Power on */
+
+#define PCM990_CTRL_REG5 0x000A /* MMC2 CTRL REGISTER 5 */
+#define PCM990_CTRL_MMC2PWR 0x0001 /* RW MMC2 Power on */
+#define PCM990_CTRL_MMC2LED 0x0002 /* RW MMC2 LED */
+#define PCM990_CTRL_MMC2DE 0x0004 /* R MMC2 Card detect */
+#define PCM990_CTRL_MMC2WP 0x0008 /* R MMC2 Card write protect */
+
+#define PCM990_CTRL_REG6 0x000C /* Interrupt Clear REGISTER */
+#define PCM990_CTRL_INTC0 0x0001 /* Clear Reg BT Detect */
+#define PCM990_CTRL_INTC1 0x0002 /* Clear Reg FR RI */
+#define PCM990_CTRL_INTC2 0x0004 /* Clear Reg MMC1 Detect */
+#define PCM990_CTRL_INTC3 0x0008 /* Clear Reg PM_5V off */
+
+#define PCM990_CTRL_REG7 0x000E /* Interrupt Enable REGISTER */
+#define PCM990_CTRL_ENAINT0 0x0001 /* Enable Int BT Detect */
+#define PCM990_CTRL_ENAINT1 0x0002 /* Enable Int FR RI */
+#define PCM990_CTRL_ENAINT2 0x0004 /* Enable Int MMC1 Detect */
+#define PCM990_CTRL_ENAINT3 0x0008 /* Enable Int PM_5V off */
+
+#define PCM990_CTRL_REG8 0x0014 /* Uart REGISTER */
+#define PCM990_CTRL_FFSD 0x0001 /* BT Uart Enable */
+#define PCM990_CTRL_BTSD 0x0002 /* FF Uart Enable */
+#define PCM990_CTRL_FFRI 0x0004 /* FF Uart RI detect */
+#define PCM990_CTRL_BTRX 0x0008 /* BT Uart Rx detect */
+
+#define PCM990_CTRL_REG9 0x0010 /* AC97 Flash REGISTER */
+#define PCM990_CTRL_FLWP 0x0001 /* pC Flash Write Protect */
+#define PCM990_CTRL_FLDIS 0x0002 /* pC Flash Disable */
+#define PCM990_CTRL_AC97ENA 0x0004 /* Enable AC97 Expansion */
+
+#define PCM990_CTRL_REG10 0x0012 /* GPS-REGISTER */
+#define PCM990_CTRL_GPSPWR 0x0004 /* GPS-Modul Power on */
+#define PCM990_CTRL_GPSENA 0x0008 /* GPS-Modul Enable */
+
+#define PCM990_CTRL_REG11 0x0014 /* Accu REGISTER */
+#define PCM990_CTRL_ACENA 0x0001 /* Charge Enable */
+#define PCM990_CTRL_ACSEL 0x0002 /* Charge Akku -> DC Enable */
+#define PCM990_CTRL_ACPRES 0x0004 /* DC Present */
+#define PCM990_CTRL_ACALARM 0x0008 /* Error Akku */
+
+#define PCM990_CTRL_P2V(x) ((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE)
+#define PCM990_CTRL_V2P(x) ((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS)
+
+#ifndef __ASSEMBLY__
+# define __PCM990_CTRL_REG(x) \
+ (*((volatile unsigned char *)PCM990_CTRL_P2V(x)))
+#else
+# define __PCM990_CTRL_REG(x) PCM990_CTRL_P2V(x)
+#endif
+
+#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
+#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
+#define PCM990_CTRL0 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0)
+#define PCM990_CTRL1 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1)
+#define PCM990_CTRL2 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2)
+#define PCM990_CTRL3 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3)
+#define PCM990_CTRL4 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4)
+#define PCM990_CTRL5 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5)
+#define PCM990_CTRL6 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
+#define PCM990_CTRL7 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
+#define PCM990_CTRL8 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8)
+#define PCM990_CTRL9 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9)
+#define PCM990_CTRL10 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10)
+#define PCM990_CTRL11 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11)
+
+
+/*
+ * IDE
+ */
+#define PCM990_IDE_IRQ_GPIO 13
+#define PCM990_IDE_IRQ IRQ_GPIO(PCM990_IDE_IRQ_GPIO)
+#define PCM990_IDE_IRQ_EDGE IRQT_RISING
+#define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */
+#define PCM990_IDE_PLD_BASE 0xee000000
+#define PCM990_IDE_PLD_SIZE (1*1024*1024)
+
+/* visible CPLD (U6) registers */
+#define PCM990_IDE_PLD_REG0 0x1000 /* OFFSET IDE REGISTER 0 */
+#define PCM990_IDE_PM5V 0x0004 /* R System VCC_5V */
+#define PCM990_IDE_STBY 0x0008 /* R System StandBy */
+
+#define PCM990_IDE_PLD_REG1 0x1002 /* OFFSET IDE REGISTER 1 */
+#define PCM990_IDE_IDEMODE 0x0001 /* R TrueIDE Mode */
+#define PCM990_IDE_DMAENA 0x0004 /* RW DMA Enable */
+#define PCM990_IDE_DMA1_0 0x0008 /* RW 1=DREQ1 0=DREQ0 */
+
+#define PCM990_IDE_PLD_REG2 0x1004 /* OFFSET IDE REGISTER 2 */
+#define PCM990_IDE_RESENA 0x0001 /* RW IDE Reset Bit enable */
+#define PCM990_IDE_RES 0x0002 /* RW IDE Reset Bit */
+#define PCM990_IDE_RDY 0x0008 /* RDY */
+
+#define PCM990_IDE_PLD_REG3 0x1006 /* OFFSET IDE REGISTER 3 */
+#define PCM990_IDE_IDEOE 0x0001 /* RW Latch on Databus */
+#define PCM990_IDE_IDEON 0x0002 /* RW Latch on Control Address */
+#define PCM990_IDE_IDEIN 0x0004 /* RW Latch on Interrupt usw. */
+
+#define PCM990_IDE_PLD_REG4 0x1008 /* OFFSET IDE REGISTER 4 */
+#define PCM990_IDE_PWRENA 0x0001 /* RW IDE Power enable */
+#define PCM990_IDE_5V 0x0002 /* R IDE Power 5V */
+#define PCM990_IDE_PWG 0x0008 /* R IDE Power is on */
+
+#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
+#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
+
+#ifndef __ASSEMBLY__
+# define __PCM990_IDE_PLD_REG(x) \
+ (*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x)))
+#else
+# define __PCM990_IDE_PLD_REG(x) PCM990_IDE_PLD_P2V(x)
+#endif
+
+#define PCM990_IDE0 \
+ __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0)
+#define PCM990_IDE1 \
+ __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1)
+#define PCM990_IDE2 \
+ __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2)
+#define PCM990_IDE3 \
+ __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3)
+#define PCM990_IDE4 \
+ __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4)
+
+/*
+ * Compact Flash
+ */
+#define PCM990_CF_IRQ_GPIO 11
+#define PCM990_CF_IRQ IRQ_GPIO(PCM990_CF_IRQ_GPIO)
+#define PCM990_CF_IRQ_EDGE IRQT_RISING
+
+#define PCM990_CF_CD_GPIO 12
+#define PCM990_CF_CD IRQ_GPIO(PCM990_CF_CD_GPIO)
+#define PCM990_CF_CD_EDGE IRQT_RISING
+
+#define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */
+#define PCM990_CF_PLD_BASE 0xef000000
+#define PCM990_CF_PLD_SIZE (1*1024*1024)
+#define PCM990_CF_PLD_P2V(x) ((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE)
+#define PCM990_CF_PLD_V2P(x) ((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS)
+
+/* visible CPLD (U6) registers */
+#define PCM990_CF_PLD_REG0 0x1000 /* OFFSET CF REGISTER 0 */
+#define PCM990_CF_REG0_LED 0x0001 /* RW LED on */
+#define PCM990_CF_REG0_BLK 0x0002 /* RW LED flash when access */
+#define PCM990_CF_REG0_PM5V 0x0004 /* R System VCC_5V enable */
+#define PCM990_CF_REG0_STBY 0x0008 /* R System StandBy */
+
+#define PCM990_CF_PLD_REG1 0x1002 /* OFFSET CF REGISTER 1 */
+#define PCM990_CF_REG1_IDEMODE 0x0001 /* RW CF card run as TrueIDE */
+#define PCM990_CF_REG1_CF0 0x0002 /* RW CF card at ADDR 0x28000000 */
+
+#define PCM990_CF_PLD_REG2 0x1004 /* OFFSET CF REGISTER 2 */
+#define PCM990_CF_REG2_RES 0x0002 /* RW CF RESET BIT */
+#define PCM990_CF_REG2_RDYENA 0x0004 /* RW Enable CF_RDY */
+#define PCM990_CF_REG2_RDY 0x0008 /* R CF_RDY auf PWAIT */
+
+#define PCM990_CF_PLD_REG3 0x1006 /* OFFSET CF REGISTER 3 */
+#define PCM990_CF_REG3_CFOE 0x0001 /* RW Latch on Databus */
+#define PCM990_CF_REG3_CFON 0x0002 /* RW Latch on Control Address */
+#define PCM990_CF_REG3_CFIN 0x0004 /* RW Latch on Interrupt usw. */
+#define PCM990_CF_REG3_CFCD 0x0008 /* RW Latch on CD1/2 VS1/2 usw */
+
+#define PCM990_CF_PLD_REG4 0x1008 /* OFFSET CF REGISTER 4 */
+#define PCM990_CF_REG4_PWRENA 0x0001 /* RW CF Power on (CD1/2 = "00") */
+#define PCM990_CF_REG4_5_3V 0x0002 /* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */
+#define PCM990_CF_REG4_3B 0x0004 /* RW 3.0V Backup from VCC (5_3V=0) */
+#define PCM990_CF_REG4_PWG 0x0008 /* R CF-Power is on */
+
+#define PCM990_CF_PLD_REG5 0x100A /* OFFSET CF REGISTER 5 */
+#define PCM990_CF_REG5_BVD1 0x0001 /* R CF /BVD1 */
+#define PCM990_CF_REG5_BVD2 0x0002 /* R CF /BVD2 */
+#define PCM990_CF_REG5_VS1 0x0004 /* R CF /VS1 */
+#define PCM990_CF_REG5_VS2 0x0008 /* R CF /VS2 */
+
+#define PCM990_CF_PLD_REG6 0x100C /* OFFSET CF REGISTER 6 */
+#define PCM990_CF_REG6_CD1 0x0001 /* R CF Card_Detect1 */
+#define PCM990_CF_REG6_CD2 0x0002 /* R CF Card_Detect2 */
+
+#ifndef __ASSEMBLY__
+# define __PCM990_CF_PLD_REG(x) \
+ (*((volatile unsigned char *)PCM990_CF_PLD_P2V(x)))
+#else
+# define __PCM990_CF_PLD_REG(x) PCM990_CF_PLD_P2V(x)
+#endif
+
+#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0)
+#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1)
+#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2)
+#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3)
+#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4)
+#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5)
+#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6)
+
+/*
+ * Wolfson AC97 Touch
+ */
+#define PCM990_AC97_IRQ_GPIO 10
+#define PCM990_AC97_IRQ IRQ_GPIO(PCM990_AC97_IRQ_GPIO)
+#define PCM990_AC97_IRQ_EDGE IRQT_RISING
+
+/*
+ * MMC phyCORE
+ */
+#define PCM990_MMC0_IRQ_GPIO 9
+#define PCM990_MMC0_IRQ IRQ_GPIO(PCM990_MMC0_IRQ_GPIO)
+#define PCM990_MMC0_IRQ_EDGE IRQT_FALLING
+
+/*
+ * USB phyCore
+ */
+#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN)
+#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT)
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 1bd398d..442494d 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -1597,176 +1597,10 @@
#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
-
/*
- * SSP Serial Port Registers
- * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
- * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
+ * SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h
*/
- /* Common PXA2xx bits first */
-#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */
-#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */
-#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */
-#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */
-#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */
-#define SSCR0_National (0x2 << 4) /* National Microwire */
-#define SSCR0_ECS (1 << 6) /* External clock select */
-#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */
-#if defined(CONFIG_PXA25x)
-#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */
-#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
-#elif defined(CONFIG_PXA27x)
-#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */
-#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
-#define SSCR0_EDSS (1 << 20) /* Extended data size select */
-#define SSCR0_NCS (1 << 21) /* Network clock select */
-#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */
-#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */
-#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */
-#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */
-#define SSCR0_ADC (1 << 30) /* Audio clock select */
-#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */
-#endif
-
-#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */
-#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */
-#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */
-#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */
-#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */
-#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */
-#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */
-#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
-#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */
-#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
-
-#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */
-#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */
-#define SSSR_BSY (1 << 4) /* SSP Busy */
-#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */
-#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */
-#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */
-
-#define SSCR0_TIM (1 << 23) /* Transmit FIFO Under Run Interrupt Mask */
-#define SSCR0_RIM (1 << 22) /* Receive FIFO Over Run interrupt Mask */
-#define SSCR0_NCS (1 << 21) /* Network Clock Select */
-#define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */
-
-/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
-#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */
-#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */
-#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */
-#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */
-#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */
-#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */
-#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */
-#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */
-#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */
-#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */
-#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */
-#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */
-#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */
-#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */
-#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */
-#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interupt Enable */
-#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */
-#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */
-
-#define SSSR_BCE (1 << 23) /* Bit Count Error */
-#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */
-#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */
-#define SSSR_EOC (1 << 20) /* End Of Chain */
-#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */
-#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */
-
-#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */
-#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */
-#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */
-#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */
-#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */
-#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */
-#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */
-#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */
-#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */
-
-#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */
-#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */
-#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */
-
-#define SSCR0_P1 __REG(0x41000000) /* SSP Port 1 Control Register 0 */
-#define SSCR1_P1 __REG(0x41000004) /* SSP Port 1 Control Register 1 */
-#define SSSR_P1 __REG(0x41000008) /* SSP Port 1 Status Register */
-#define SSITR_P1 __REG(0x4100000C) /* SSP Port 1 Interrupt Test Register */
-#define SSDR_P1 __REG(0x41000010) /* (Write / Read) SSP Port 1 Data Write Register/SSP Data Read Register */
-
-/* Support existing PXA25x drivers */
-#define SSCR0 SSCR0_P1 /* SSP Control Register 0 */
-#define SSCR1 SSCR1_P1 /* SSP Control Register 1 */
-#define SSSR SSSR_P1 /* SSP Status Register */
-#define SSITR SSITR_P1 /* SSP Interrupt Test Register */
-#define SSDR SSDR_P1 /* (Write / Read) SSP Data Write Register/SSP Data Read Register */
-
-/* PXA27x ports */
-#if defined (CONFIG_PXA27x)
-#define SSTO_P1 __REG(0x41000028) /* SSP Port 1 Time Out Register */
-#define SSPSP_P1 __REG(0x4100002C) /* SSP Port 1 Programmable Serial Protocol */
-#define SSTSA_P1 __REG(0x41000030) /* SSP Port 1 Tx Timeslot Active */
-#define SSRSA_P1 __REG(0x41000034) /* SSP Port 1 Rx Timeslot Active */
-#define SSTSS_P1 __REG(0x41000038) /* SSP Port 1 Timeslot Status */
-#define SSACD_P1 __REG(0x4100003C) /* SSP Port 1 Audio Clock Divider */
-#define SSCR0_P2 __REG(0x41700000) /* SSP Port 2 Control Register 0 */
-#define SSCR1_P2 __REG(0x41700004) /* SSP Port 2 Control Register 1 */
-#define SSSR_P2 __REG(0x41700008) /* SSP Port 2 Status Register */
-#define SSITR_P2 __REG(0x4170000C) /* SSP Port 2 Interrupt Test Register */
-#define SSDR_P2 __REG(0x41700010) /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */
-#define SSTO_P2 __REG(0x41700028) /* SSP Port 2 Time Out Register */
-#define SSPSP_P2 __REG(0x4170002C) /* SSP Port 2 Programmable Serial Protocol */
-#define SSTSA_P2 __REG(0x41700030) /* SSP Port 2 Tx Timeslot Active */
-#define SSRSA_P2 __REG(0x41700034) /* SSP Port 2 Rx Timeslot Active */
-#define SSTSS_P2 __REG(0x41700038) /* SSP Port 2 Timeslot Status */
-#define SSACD_P2 __REG(0x4170003C) /* SSP Port 2 Audio Clock Divider */
-#define SSCR0_P3 __REG(0x41900000) /* SSP Port 3 Control Register 0 */
-#define SSCR1_P3 __REG(0x41900004) /* SSP Port 3 Control Register 1 */
-#define SSSR_P3 __REG(0x41900008) /* SSP Port 3 Status Register */
-#define SSITR_P3 __REG(0x4190000C) /* SSP Port 3 Interrupt Test Register */
-#define SSDR_P3 __REG(0x41900010) /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */
-#define SSTO_P3 __REG(0x41900028) /* SSP Port 3 Time Out Register */
-#define SSPSP_P3 __REG(0x4190002C) /* SSP Port 3 Programmable Serial Protocol */
-#define SSTSA_P3 __REG(0x41900030) /* SSP Port 3 Tx Timeslot Active */
-#define SSRSA_P3 __REG(0x41900034) /* SSP Port 3 Rx Timeslot Active */
-#define SSTSS_P3 __REG(0x41900038) /* SSP Port 3 Timeslot Status */
-#define SSACD_P3 __REG(0x4190003C) /* SSP Port 3 Audio Clock Divider */
-#else /* PXA255 (only port 2) and PXA26x ports*/
-#define SSTO_P1 __REG(0x41000028) /* SSP Port 1 Time Out Register */
-#define SSPSP_P1 __REG(0x4100002C) /* SSP Port 1 Programmable Serial Protocol */
-#define SSCR0_P2 __REG(0x41400000) /* SSP Port 2 Control Register 0 */
-#define SSCR1_P2 __REG(0x41400004) /* SSP Port 2 Control Register 1 */
-#define SSSR_P2 __REG(0x41400008) /* SSP Port 2 Status Register */
-#define SSITR_P2 __REG(0x4140000C) /* SSP Port 2 Interrupt Test Register */
-#define SSDR_P2 __REG(0x41400010) /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */
-#define SSTO_P2 __REG(0x41400028) /* SSP Port 2 Time Out Register */
-#define SSPSP_P2 __REG(0x4140002C) /* SSP Port 2 Programmable Serial Protocol */
-#define SSCR0_P3 __REG(0x41500000) /* SSP Port 3 Control Register 0 */
-#define SSCR1_P3 __REG(0x41500004) /* SSP Port 3 Control Register 1 */
-#define SSSR_P3 __REG(0x41500008) /* SSP Port 3 Status Register */
-#define SSITR_P3 __REG(0x4150000C) /* SSP Port 3 Interrupt Test Register */
-#define SSDR_P3 __REG(0x41500010) /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */
-#define SSTO_P3 __REG(0x41500028) /* SSP Port 3 Time Out Register */
-#define SSPSP_P3 __REG(0x4150002C) /* SSP Port 3 Programmable Serial Protocol */
-#endif
-
-#define SSCR0_P(x) (*(((x) == 1) ? &SSCR0_P1 : ((x) == 2) ? &SSCR0_P2 : ((x) == 3) ? &SSCR0_P3 : NULL))
-#define SSCR1_P(x) (*(((x) == 1) ? &SSCR1_P1 : ((x) == 2) ? &SSCR1_P2 : ((x) == 3) ? &SSCR1_P3 : NULL))
-#define SSSR_P(x) (*(((x) == 1) ? &SSSR_P1 : ((x) == 2) ? &SSSR_P2 : ((x) == 3) ? &SSSR_P3 : NULL))
-#define SSITR_P(x) (*(((x) == 1) ? &SSITR_P1 : ((x) == 2) ? &SSITR_P2 : ((x) == 3) ? &SSITR_P3 : NULL))
-#define SSDR_P(x) (*(((x) == 1) ? &SSDR_P1 : ((x) == 2) ? &SSDR_P2 : ((x) == 3) ? &SSDR_P3 : NULL))
-#define SSTO_P(x) (*(((x) == 1) ? &SSTO_P1 : ((x) == 2) ? &SSTO_P2 : ((x) == 3) ? &SSTO_P3 : NULL))
-#define SSPSP_P(x) (*(((x) == 1) ? &SSPSP_P1 : ((x) == 2) ? &SSPSP_P2 : ((x) == 3) ? &SSPSP_P3 : NULL))
-#define SSTSA_P(x) (*(((x) == 1) ? &SSTSA_P1 : ((x) == 2) ? &SSTSA_P2 : ((x) == 3) ? &SSTSA_P3 : NULL))
-#define SSRSA_P(x) (*(((x) == 1) ? &SSRSA_P1 : ((x) == 2) ? &SSRSA_P2 : ((x) == 3) ? &SSRSA_P3 : NULL))
-#define SSTSS_P(x) (*(((x) == 1) ? &SSTSS_P1 : ((x) == 2) ? &SSTSS_P2 : ((x) == 3) ? &SSTSS_P3 : NULL))
-#define SSACD_P(x) (*(((x) == 1) ? &SSACD_P1 : ((x) == 2) ? &SSACD_P2 : ((x) == 3) ? &SSACD_P3 : NULL))
-
/*
* MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h
*/
@@ -2014,71 +1848,8 @@
#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
-/*
- * Memory controller
- */
-
-#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */
-#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */
-#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */
-#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */
-#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */
-#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
-#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */
-#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */
-#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */
-#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */
-#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */
-#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */
-#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */
-#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */
-#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */
-#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */
-#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
-
-/*
- * More handy macros for PCMCIA
- *
- * Arg is socket number
- */
-#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */
-#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */
-#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */
-
-/* MECR register defines */
-#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
-#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */
-
-#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
-#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
-#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
-#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */
-#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */
-#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */
-#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */
-#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */
-#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */
-#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */
-#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */
-#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */
-#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
-#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
-
-
#ifdef CONFIG_PXA27x
-#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */
-
-#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */
-#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */
-#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */
-#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */
-#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */
-#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */
-#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */
-#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
-#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
-
/*
* Keypad
*/
@@ -2135,74 +1906,6 @@
#define KPAS_SO (0x1 << 31)
#define KPASMKPx_SO (0x1 << 31)
-/*
- * UHC: USB Host Controller (OHCI-like) register definitions
- */
-#define UHC_BASE_PHYS (0x4C000000)
-#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */
-#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */
-#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */
-#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */
-#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */
-#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */
-#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */
-#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */
-#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */
-#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */
-#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
-#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
-#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */
-#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */
-#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */
-#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */
-#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */
-#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */
-
-#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */
-#define UHCRHDA_NOCP (1 << 12) /* No over current protection */
-
-#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */
-#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */
-#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */
-#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */
-#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */
-
-#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */
-#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */
-#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/
-#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/
-#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */
-#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */
-#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */
-#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */
-#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */
-#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */
-
-#define UHCHR __REG(0x4C000064) /* UHC Reset Register */
-#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */
-#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */
-#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */
-#define UHCHR_PCPL (1 << 7) /* Power control polarity low */
-#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */
-#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */
-#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */
-#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */
-#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */
-#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */
-#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */
-
-#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/
-#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */
-#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */
-#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */
-#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */
-#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort
- Interrupt Enable*/
-#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */
-#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */
-
-#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */
-
/* Camera Interface */
#define CICR0 __REG(0x50000000)
#define CICR1 __REG(0x50000004)
@@ -2350,6 +2053,77 @@
#endif
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+/*
+ * UHC: USB Host Controller (OHCI-like) register definitions
+ */
+#define UHC_BASE_PHYS (0x4C000000)
+#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */
+#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */
+#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */
+#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */
+#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */
+#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */
+#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */
+#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */
+#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */
+#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */
+#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
+#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
+#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */
+#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */
+#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */
+#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */
+#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */
+#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */
+
+#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */
+#define UHCRHDA_NOCP (1 << 12) /* No over current protection */
+
+#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */
+#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */
+#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */
+#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */
+#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */
+
+#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */
+#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */
+#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/
+#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/
+#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */
+#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */
+#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */
+#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */
+#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */
+#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */
+
+#define UHCHR __REG(0x4C000064) /* UHC Reset Register */
+#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */
+#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */
+#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */
+#define UHCHR_PCPL (1 << 7) /* Power control polarity low */
+#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */
+#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */
+#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */
+#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */
+#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */
+#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */
+#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */
+
+#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/
+#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */
+#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */
+#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */
+#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */
+#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort
+ Interrupt Enable*/
+#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */
+#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */
+
+#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */
+
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+
/* PWRMODE register M field values */
#define PWRMODE_IDLE 0x1
diff --git a/include/asm-arm/arch-pxa/pxa2xx-regs.h b/include/asm-arm/arch-pxa/pxa2xx-regs.h
new file mode 100644
index 0000000..9553b54
--- /dev/null
+++ b/include/asm-arm/arch-pxa/pxa2xx-regs.h
@@ -0,0 +1,84 @@
+/*
+ * linux/include/asm-arm/arch-pxa/pxa2xx-regs.h
+ *
+ * Taken from pxa-regs.h by Russell King
+ *
+ * Author: Nicolas Pitre
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PXA2XX_REGS_H
+#define __PXA2XX_REGS_H
+
+/*
+ * Memory controller
+ */
+
+#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */
+#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */
+#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */
+#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */
+#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */
+#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */
+#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */
+#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+
+/*
+ * More handy macros for PCMCIA
+ *
+ * Arg is socket number
+ */
+#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */
+#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */
+#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */
+
+/* MECR register defines */
+#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
+#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */
+
+#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
+#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
+#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
+#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
+
+
+#ifdef CONFIG_PXA27x
+
+#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */
+
+#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */
+#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */
+#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */
+#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */
+#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */
+#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */
+#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */
+#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
+#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
+
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h
index acc7ec7..3459fb2 100644
--- a/include/asm-arm/arch-pxa/pxa2xx_spi.h
+++ b/include/asm-arm/arch-pxa/pxa2xx_spi.h
@@ -22,32 +22,8 @@
#define PXA2XX_CS_ASSERT (0x01)
#define PXA2XX_CS_DEASSERT (0x02)
-#if defined(CONFIG_PXA25x)
-#define CLOCK_SPEED_HZ 3686400
-#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/2/(x+1))<<8)&0x0000ff00)
-#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
-#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
-#elif defined(CONFIG_PXA27x)
-#define CLOCK_SPEED_HZ 13000000
-#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
-#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
-#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
-#endif
-
-#define SSP1_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(1)))))
-#define SSP2_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(2)))))
-#define SSP3_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(3)))))
-
-enum pxa_ssp_type {
- SSP_UNDEFINED = 0,
- PXA25x_SSP, /* pxa 210, 250, 255, 26x */
- PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
- PXA27x_SSP,
-};
-
/* device.platform_data for SSP controller devices */
struct pxa2xx_spi_master {
- enum pxa_ssp_type ssp_type;
u32 clock_enable;
u16 num_chipselect;
u8 enable_dma;
diff --git a/include/asm-arm/arch-pxa/pxa3xx-regs.h b/include/asm-arm/arch-pxa/pxa3xx-regs.h
index 3900a0c..66d5411 100644
--- a/include/asm-arm/arch-pxa/pxa3xx-regs.h
+++ b/include/asm-arm/arch-pxa/pxa3xx-regs.h
@@ -14,6 +14,92 @@
#define __ASM_ARCH_PXA3XX_REGS_H
/*
+ * Slave Power Managment Unit
+ */
+#define ASCR __REG(0x40f40000) /* Application Subsystem Power Status/Configuration */
+#define ARSR __REG(0x40f40004) /* Application Subsystem Reset Status */
+#define AD3ER __REG(0x40f40008) /* Application Subsystem Wake-Up from D3 Enable */
+#define AD3SR __REG(0x40f4000c) /* Application Subsystem Wake-Up from D3 Status */
+#define AD2D0ER __REG(0x40f40010) /* Application Subsystem Wake-Up from D2 to D0 Enable */
+#define AD2D0SR __REG(0x40f40014) /* Application Subsystem Wake-Up from D2 to D0 Status */
+#define AD2D1ER __REG(0x40f40018) /* Application Subsystem Wake-Up from D2 to D1 Enable */
+#define AD2D1SR __REG(0x40f4001c) /* Application Subsystem Wake-Up from D2 to D1 Status */
+#define AD1D0ER __REG(0x40f40020) /* Application Subsystem Wake-Up from D1 to D0 Enable */
+#define AD1D0SR __REG(0x40f40024) /* Application Subsystem Wake-Up from D1 to D0 Status */
+#define AGENP __REG(0x40f4002c) /* Application Subsystem General Purpose */
+#define AD3R __REG(0x40f40030) /* Application Subsystem D3 Configuration */
+#define AD2R __REG(0x40f40034) /* Application Subsystem D2 Configuration */
+#define AD1R __REG(0x40f40038) /* Application Subsystem D1 Configuration */
+
+/*
+ * Application Subsystem Configuration bits.
+ */
+#define ASCR_RDH (1 << 31)
+#define ASCR_D1S (1 << 2)
+#define ASCR_D2S (1 << 1)
+#define ASCR_D3S (1 << 0)
+
+/*
+ * Application Reset Status bits.
+ */
+#define ARSR_GPR (1 << 3)
+#define ARSR_LPMR (1 << 2)
+#define ARSR_WDT (1 << 1)
+#define ARSR_HWR (1 << 0)
+
+/*
+ * Application Subsystem Wake-Up bits.
+ */
+#define ADXER_WRTC (1 << 31) /* RTC */
+#define ADXER_WOST (1 << 30) /* OS Timer */
+#define ADXER_WTSI (1 << 29) /* Touchscreen */
+#define ADXER_WUSBH (1 << 28) /* USB host */
+#define ADXER_WUSB2 (1 << 26) /* USB client 2.0 */
+#define ADXER_WMSL0 (1 << 24) /* MSL port 0*/
+#define ADXER_WDMUX3 (1 << 23) /* USB EDMUX3 */
+#define ADXER_WDMUX2 (1 << 22) /* USB EDMUX2 */
+#define ADXER_WKP (1 << 21) /* Keypad */
+#define ADXER_WUSIM1 (1 << 20) /* USIM Port 1 */
+#define ADXER_WUSIM0 (1 << 19) /* USIM Port 0 */
+#define ADXER_WOTG (1 << 16) /* USBOTG input */
+#define ADXER_MFP_WFLASH (1 << 15) /* MFP: Data flash busy */
+#define ADXER_MFP_GEN12 (1 << 14) /* MFP: MMC3/GPIO/OST inputs */
+#define ADXER_MFP_WMMC2 (1 << 13) /* MFP: MMC2 */
+#define ADXER_MFP_WMMC1 (1 << 12) /* MFP: MMC1 */
+#define ADXER_MFP_WI2C (1 << 11) /* MFP: I2C */
+#define ADXER_MFP_WSSP4 (1 << 10) /* MFP: SSP4 */
+#define ADXER_MFP_WSSP3 (1 << 9) /* MFP: SSP3 */
+#define ADXER_MFP_WMAXTRIX (1 << 8) /* MFP: matrix keypad */
+#define ADXER_MFP_WUART3 (1 << 7) /* MFP: UART3 */
+#define ADXER_MFP_WUART2 (1 << 6) /* MFP: UART2 */
+#define ADXER_MFP_WUART1 (1 << 5) /* MFP: UART1 */
+#define ADXER_MFP_WSSP2 (1 << 4) /* MFP: SSP2 */
+#define ADXER_MFP_WSSP1 (1 << 3) /* MFP: SSP1 */
+#define ADXER_MFP_WAC97 (1 << 2) /* MFP: AC97 */
+#define ADXER_WEXTWAKE1 (1 << 1) /* External Wake 1 */
+#define ADXER_WEXTWAKE0 (1 << 0) /* External Wake 0 */
+
+/*
+ * AD3R/AD2R/AD1R bits. R2-R5 are only defined for PXA320.
+ */
+#define ADXR_L2 (1 << 8)
+#define ADXR_R5 (1 << 5)
+#define ADXR_R4 (1 << 4)
+#define ADXR_R3 (1 << 3)
+#define ADXR_R2 (1 << 2)
+#define ADXR_R1 (1 << 1)
+#define ADXR_R0 (1 << 0)
+
+/*
+ * Values for PWRMODE CP15 register
+ */
+#define PXA3xx_PM_S3D4C4 0x07 /* aka deep sleep */
+#define PXA3xx_PM_S2D3C4 0x06 /* aka sleep */
+#define PXA3xx_PM_S0D2C2 0x03 /* aka standby */
+#define PXA3xx_PM_S0D1C2 0x02 /* aka LCD refresh */
+#define PXA3xx_PM_S0D0C1 0x01
+
+/*
* Application Subsystem Clock
*/
#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */
diff --git a/include/asm-arm/arch-pxa/regs-ssp.h b/include/asm-arm/arch-pxa/regs-ssp.h
new file mode 100644
index 0000000..991cb68
--- /dev/null
+++ b/include/asm-arm/arch-pxa/regs-ssp.h
@@ -0,0 +1,112 @@
+#ifndef __ASM_ARCH_REGS_SSP_H
+#define __ASM_ARCH_REGS_SSP_H
+
+/*
+ * SSP Serial Port Registers
+ * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
+ * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
+ */
+
+#define SSCR0 (0x00) /* SSP Control Register 0 */
+#define SSCR1 (0x04) /* SSP Control Register 1 */
+#define SSSR (0x08) /* SSP Status Register */
+#define SSITR (0x0C) /* SSP Interrupt Test Register */
+#define SSDR (0x10) /* SSP Data Write/Data Read Register */
+
+#define SSTO (0x28) /* SSP Time Out Register */
+#define SSPSP (0x2C) /* SSP Programmable Serial Protocol */
+#define SSTSA (0x30) /* SSP Tx Timeslot Active */
+#define SSRSA (0x34) /* SSP Rx Timeslot Active */
+#define SSTSS (0x38) /* SSP Timeslot Status */
+#define SSACD (0x3C) /* SSP Audio Clock Divider */
+
+/* Common PXA2xx bits first */
+#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */
+#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */
+#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */
+#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */
+#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */
+#define SSCR0_National (0x2 << 4) /* National Microwire */
+#define SSCR0_ECS (1 << 6) /* External clock select */
+#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */
+#if defined(CONFIG_PXA25x)
+#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */
+#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
+#elif defined(CONFIG_PXA27x)
+#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */
+#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
+#define SSCR0_EDSS (1 << 20) /* Extended data size select */
+#define SSCR0_NCS (1 << 21) /* Network clock select */
+#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */
+#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */
+#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */
+#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */
+#define SSCR0_ADC (1 << 30) /* Audio clock select */
+#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */
+#endif
+
+#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */
+#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */
+#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */
+#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */
+#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */
+#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */
+#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */
+#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
+#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */
+#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
+
+#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */
+#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */
+#define SSSR_BSY (1 << 4) /* SSP Busy */
+#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */
+#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */
+#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */
+
+#define SSCR0_TIM (1 << 23) /* Transmit FIFO Under Run Interrupt Mask */
+#define SSCR0_RIM (1 << 22) /* Receive FIFO Over Run interrupt Mask */
+#define SSCR0_NCS (1 << 21) /* Network Clock Select */
+#define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */
+
+/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
+#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */
+#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */
+#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */
+#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */
+#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */
+#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */
+#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */
+#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */
+#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */
+#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */
+#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */
+#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */
+#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */
+#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */
+#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */
+#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interupt Enable */
+#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */
+#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */
+
+#define SSSR_BCE (1 << 23) /* Bit Count Error */
+#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */
+#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */
+#define SSSR_EOC (1 << 20) /* End Of Chain */
+#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */
+#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */
+
+#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */
+#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */
+#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */
+#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */
+#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */
+#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */
+#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */
+#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */
+#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */
+
+#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */
+#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */
+#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */
+
+#endif /* __ASM_ARCH_REGS_SSP_H */
diff --git a/include/asm-arm/arch-pxa/sharpsl.h b/include/asm-arm/arch-pxa/sharpsl.h
index 2b0fe77..3b1d4a7 100644
--- a/include/asm-arm/arch-pxa/sharpsl.h
+++ b/include/asm-arm/arch-pxa/sharpsl.h
@@ -16,7 +16,7 @@
*/
struct corgits_machinfo {
- unsigned long (*get_hsync_len)(void);
+ unsigned long (*get_hsync_invperiod)(void);
void (*put_hsync)(void);
void (*wait_hsync)(void);
};
diff --git a/include/asm-arm/arch-pxa/spitz.h b/include/asm-arm/arch-pxa/spitz.h
index 4953dd32..bd14365 100644
--- a/include/asm-arm/arch-pxa/spitz.h
+++ b/include/asm-arm/arch-pxa/spitz.h
@@ -156,5 +156,3 @@
extern struct platform_device spitzscoop2_device;
extern struct platform_device spitzssp_device;
extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
-
-extern void spitz_lcd_power(int on, struct fb_var_screeninfo *var);
diff --git a/include/asm-arm/arch-pxa/ssp.h b/include/asm-arm/arch-pxa/ssp.h
index ea20055..a012882 100644
--- a/include/asm-arm/arch-pxa/ssp.h
+++ b/include/asm-arm/arch-pxa/ssp.h
@@ -13,10 +13,37 @@
* PXA255 SSP, NSSP
* PXA26x SSP, NSSP, ASSP
* PXA27x SSP1, SSP2, SSP3
+ * PXA3xx SSP1, SSP2, SSP3, SSP4
*/
-#ifndef SSP_H
-#define SSP_H
+#ifndef __ASM_ARCH_SSP_H
+#define __ASM_ARCH_SSP_H
+
+#include <linux/list.h>
+
+enum pxa_ssp_type {
+ SSP_UNDEFINED = 0,
+ PXA25x_SSP, /* pxa 210, 250, 255, 26x */
+ PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
+ PXA27x_SSP,
+};
+
+struct ssp_device {
+ struct platform_device *pdev;
+ struct list_head node;
+
+ struct clk *clk;
+ void __iomem *mmio_base;
+ unsigned long phys_base;
+
+ const char *label;
+ int port_id;
+ int type;
+ int use_count;
+ int irq;
+ int drcmr_rx;
+ int drcmr_tx;
+};
/*
* SSP initialisation flags
@@ -31,6 +58,7 @@
};
struct ssp_dev {
+ struct ssp_device *ssp;
u32 port;
u32 mode;
u32 flags;
@@ -50,4 +78,6 @@
int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed);
void ssp_exit(struct ssp_dev *dev);
-#endif
+struct ssp_device *ssp_request(int port, const char *label);
+void ssp_free(struct ssp_device *);
+#endif /* __ASM_ARCH_SSP_H */
diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h
index 178aa2e..dadf4c2 100644
--- a/include/asm-arm/arch-pxa/uncompress.h
+++ b/include/asm-arm/arch-pxa/uncompress.h
@@ -9,19 +9,21 @@
* published by the Free Software Foundation.
*/
-#define FFUART ((volatile unsigned long *)0x40100000)
-#define BTUART ((volatile unsigned long *)0x40200000)
-#define STUART ((volatile unsigned long *)0x40700000)
-#define HWUART ((volatile unsigned long *)0x41600000)
+#include <linux/serial_reg.h>
+#include <asm/arch/pxa-regs.h>
+
+#define __REG(x) ((volatile unsigned long *)x)
#define UART FFUART
static inline void putc(char c)
{
- while (!(UART[5] & 0x20))
+ if (!(UART[UART_IER] & IER_UUE))
+ return;
+ while (!(UART[UART_LSR] & LSR_TDRQ))
barrier();
- UART[0] = c;
+ UART[UART_TX] = c;
}
/*
diff --git a/include/asm-arm/arch-pxa/zylonite.h b/include/asm-arm/arch-pxa/zylonite.h
index f58b591..5f717d6 100644
--- a/include/asm-arm/arch-pxa/zylonite.h
+++ b/include/asm-arm/arch-pxa/zylonite.h
@@ -3,9 +3,18 @@
#define ZYLONITE_ETH_PHYS 0x14000000
+#define EXT_GPIO(x) (128 + (x))
+
/* the following variables are processor specific and initialized
* by the corresponding zylonite_pxa3xx_init()
*/
+struct platform_mmc_slot {
+ int gpio_cd;
+ int gpio_wp;
+};
+
+extern struct platform_mmc_slot zylonite_mmc_slot[];
+
extern int gpio_backlight;
extern int gpio_eth_irq;
diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S
index 9c8cd9a..89076c3 100644
--- a/include/asm-arm/arch-s3c2410/debug-macro.S
+++ b/include/asm-arm/arch-s3c2410/debug-macro.S
@@ -92,11 +92,9 @@
#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)
#define fifo_full fifo_full_s3c2410
#define fifo_level fifo_level_s3c2410
-#warning 2410only
#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)
#define fifo_full fifo_full_s3c24xx
#define fifo_level fifo_level_s3c24xx
-#warning generic
#endif
/* include the reset of the code which will do the work */
diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h
index c6e8d8f..4f291d9 100644
--- a/include/asm-arm/arch-s3c2410/dma.h
+++ b/include/asm-arm/arch-s3c2410/dma.h
@@ -214,6 +214,7 @@
unsigned long dev_addr;
unsigned long load_timeout;
unsigned int flags; /* channel flags */
+ unsigned int hw_cfg; /* last hw config */
struct s3c24xx_dma_map *map; /* channel hw maps */
diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h
index 6dadf58..29592c3 100644
--- a/include/asm-arm/arch-s3c2410/hardware.h
+++ b/include/asm-arm/arch-s3c2410/hardware.h
@@ -50,6 +50,17 @@
extern int s3c2410_gpio_getirq(unsigned int pin);
+/* s3c2410_gpio_irq2pin
+ *
+ * turn the given irq number into the corresponding GPIO number
+ *
+ * returns:
+ * < 0 = no pin
+ * >=0 = gpio pin number
+*/
+
+extern int s3c2410_gpio_irq2pin(unsigned int irq);
+
#ifdef CONFIG_CPU_S3C2400
extern int s3c2400_gpio_getirq(unsigned int pin);
@@ -87,6 +98,18 @@
extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+/* s3c2410_gpio_getpull
+ *
+ * Read the state of the pull-up on a given pin
+ *
+ * return:
+ * < 0 => error code
+ * 0 => enabled
+ * 1 => disabled
+*/
+
+extern int s3c2410_gpio_getpull(unsigned int pin);
+
extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
@@ -99,6 +122,11 @@
#endif /* CONFIG_CPU_S3C2440 */
+#ifdef CONFIG_CPU_S3C2412
+
+extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
+
+#endif /* CONFIG_CPU_S3C2412 */
#endif /* __ASSEMBLY__ */
diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h
index 996f654..d858b3e 100644
--- a/include/asm-arm/arch-s3c2410/irqs.h
+++ b/include/asm-arm/arch-s3c2410/irqs.h
@@ -160,4 +160,7 @@
#define NR_IRQS (IRQ_S3C2440_AC97+1)
#endif
+/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
+#define FIQ_START IRQ_EINT0
+
#endif /* __ASM_ARCH_IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h
index e39656b..dba9df9 100644
--- a/include/asm-arm/arch-s3c2410/regs-clock.h
+++ b/include/asm-arm/arch-s3c2410/regs-clock.h
@@ -138,6 +138,8 @@
#define S3C2412_CLKDIVN_PDIVN (1<<2)
#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0)
#define S3C2421_CLKDIVN_ARMDIVN (1<<3)
+#define S3C2412_CLKDIVN_DVSEN (1<<4)
+#define S3C2412_CLKDIVN_HALFHCLK (1<<5)
#define S3C2412_CLKDIVN_USB48DIV (1<<6)
#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8)
#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8)
diff --git a/include/asm-arm/arch-s3c2410/regs-dsc.h b/include/asm-arm/arch-s3c2410/regs-dsc.h
index c074851..1235df7 100644
--- a/include/asm-arm/arch-s3c2410/regs-dsc.h
+++ b/include/asm-arm/arch-s3c2410/regs-dsc.h
@@ -19,7 +19,7 @@
#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0)
#endif
-#if defined(CONFIG_CPU_S3C2440)
+#if defined(CONFIG_CPU_S3C244X)
#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4)
#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8)
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
index b693158..0ad75d7 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpio.h
@@ -1133,12 +1133,16 @@
#define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C)
#define S3C2412_GPCSLPCON S3C2410_GPIOREG(0x2C)
#define S3C2412_GPDSLPCON S3C2410_GPIOREG(0x3C)
-#define S3C2412_GPESLPCON S3C2410_GPIOREG(0x4C)
#define S3C2412_GPFSLPCON S3C2410_GPIOREG(0x5C)
#define S3C2412_GPGSLPCON S3C2410_GPIOREG(0x6C)
#define S3C2412_GPHSLPCON S3C2410_GPIOREG(0x7C)
/* definitions for each pin bit */
+#define S3C2412_GPIO_SLPCON_LOW ( 0x00 )
+#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
+#define S3C2412_GPIO_SLPCON_IN ( 0x02 )
+#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
+
#define S3C2412_SLPCON_LOW(x) ( 0x00 << ((x) * 2))
#define S3C2412_SLPCON_HIGH(x) ( 0x01 << ((x) * 2))
#define S3C2412_SLPCON_IN(x) ( 0x02 << ((x) * 2))
diff --git a/include/asm-arm/arch-s3c2410/regs-mem.h b/include/asm-arm/arch-s3c2410/regs-mem.h
index e4d8234..312ff93 100644
--- a/include/asm-arm/arch-s3c2410/regs-mem.h
+++ b/include/asm-arm/arch-s3c2410/regs-mem.h
@@ -98,16 +98,19 @@
#define S3C2410_BANKCON_Tacp3 (0x1 << 2)
#define S3C2410_BANKCON_Tacp4 (0x2 << 2)
#define S3C2410_BANKCON_Tacp6 (0x3 << 2)
+#define S3C2410_BANKCON_Tacp_SHIFT (2)
#define S3C2410_BANKCON_Tcah0 (0x0 << 4)
#define S3C2410_BANKCON_Tcah1 (0x1 << 4)
#define S3C2410_BANKCON_Tcah2 (0x2 << 4)
#define S3C2410_BANKCON_Tcah4 (0x3 << 4)
+#define S3C2410_BANKCON_Tcah_SHIFT (4)
#define S3C2410_BANKCON_Tcoh0 (0x0 << 6)
#define S3C2410_BANKCON_Tcoh1 (0x1 << 6)
#define S3C2410_BANKCON_Tcoh2 (0x2 << 6)
#define S3C2410_BANKCON_Tcoh4 (0x3 << 6)
+#define S3C2410_BANKCON_Tcoh_SHIFT (6)
#define S3C2410_BANKCON_Tacc1 (0x0 << 8)
#define S3C2410_BANKCON_Tacc2 (0x1 << 8)
@@ -117,16 +120,19 @@
#define S3C2410_BANKCON_Tacc8 (0x5 << 8)
#define S3C2410_BANKCON_Tacc10 (0x6 << 8)
#define S3C2410_BANKCON_Tacc14 (0x7 << 8)
+#define S3C2410_BANKCON_Tacc_SHIFT (8)
#define S3C2410_BANKCON_Tcos0 (0x0 << 11)
#define S3C2410_BANKCON_Tcos1 (0x1 << 11)
#define S3C2410_BANKCON_Tcos2 (0x2 << 11)
#define S3C2410_BANKCON_Tcos4 (0x3 << 11)
+#define S3C2410_BANKCON_Tcos_SHIFT (11)
#define S3C2410_BANKCON_Tacs0 (0x0 << 13)
#define S3C2410_BANKCON_Tacs1 (0x1 << 13)
#define S3C2410_BANKCON_Tacs2 (0x2 << 13)
#define S3C2410_BANKCON_Tacs4 (0x3 << 13)
+#define S3C2410_BANKCON_Tacs_SHIFT (13)
#define S3C2410_BANKCON_SRAM (0x0 << 15)
#define S3C2400_BANKCON_EDODRAM (0x2 << 15)
diff --git a/include/asm-arm/arch-s3c2410/regs-power.h b/include/asm-arm/arch-s3c2410/regs-power.h
index f79987b..13d13b7 100644
--- a/include/asm-arm/arch-s3c2410/regs-power.h
+++ b/include/asm-arm/arch-s3c2410/regs-power.h
@@ -23,7 +23,8 @@
#define S3C2412_INFORM2 S3C24XX_PWRREG(0x78)
#define S3C2412_INFORM3 S3C24XX_PWRREG(0x7C)
-#define S3C2412_PWRCFG_BATF_IGNORE (0<<0)
+#define S3C2412_PWRCFG_BATF_IRQ (1<<0)
+#define S3C2412_PWRCFG_BATF_IGNORE (2<<0)
#define S3C2412_PWRCFG_BATF_SLEEP (3<<0)
#define S3C2412_PWRCFG_BATF_MASK (3<<0)
diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h
index 6389178..14de4e5 100644
--- a/include/asm-arm/arch-s3c2410/system.h
+++ b/include/asm-arm/arch-s3c2410/system.h
@@ -20,6 +20,9 @@
#include <asm/plat-s3c/regs-watchdog.h>
#include <asm/arch/regs-clock.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
void (*s3c24xx_idle)(void);
void (*s3c24xx_reset_hook)(void);
@@ -59,6 +62,8 @@
static void
arch_reset(char mode)
{
+ struct clk *wdtclk;
+
if (mode == 's') {
cpu_reset(0);
}
@@ -70,19 +75,28 @@
__raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
+ wdtclk = clk_get(NULL, "watchdog");
+ if (!IS_ERR(wdtclk)) {
+ clk_enable(wdtclk);
+ } else
+ printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+
/* put initial values into count and data */
- __raw_writel(0x100, S3C2410_WTCNT);
- __raw_writel(0x100, S3C2410_WTDAT);
+ __raw_writel(0x80, S3C2410_WTCNT);
+ __raw_writel(0x80, S3C2410_WTDAT);
/* set the watchdog to go and reset... */
__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
/* wait for reset to assert... */
- mdelay(5000);
+ mdelay(500);
printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+ /* delay to allow the serial port to show the message */
+ mdelay(50);
+
/* we'll take a jump through zero as a poor second */
cpu_reset(0);
}
diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h
index 6c1c968..759a97b 100644
--- a/include/asm-arm/cacheflush.h
+++ b/include/asm-arm/cacheflush.h
@@ -94,6 +94,14 @@
# endif
#endif
+#if defined(CONFIG_CPU_FEROCEON)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE feroceon
+# endif
+#endif
+
#if defined(CONFIG_CPU_V6)
//# ifdef _CACHE
# define MULTI_CACHE 1
diff --git a/include/asm-arm/fpstate.h b/include/asm-arm/fpstate.h
index f31cda5..392eb53 100644
--- a/include/asm-arm/fpstate.h
+++ b/include/asm-arm/fpstate.h
@@ -17,14 +17,18 @@
/*
* VFP storage area has:
* - FPEXC, FPSCR, FPINST and FPINST2.
- * - 16 double precision data registers
- * - an implementation-dependant word of state for FLDMX/FSTMX
+ * - 16 or 32 double precision data registers
+ * - an implementation-dependant word of state for FLDMX/FSTMX (pre-ARMv6)
*
* FPEXC will always be non-zero once the VFP has been used in this process.
*/
struct vfp_hard_struct {
+#ifdef CONFIG_VFPv3
+ __u64 fpregs[32];
+#else
__u64 fpregs[16];
+#endif
#if __LINUX_ARM_ARCH__ < 6
__u32 fpmx_state;
#endif
@@ -35,6 +39,7 @@
*/
__u32 fpinst;
__u32 fpinst2;
+
#ifdef CONFIG_SMP
__u32 cpu;
#endif
diff --git a/include/asm-arm/kprobes.h b/include/asm-arm/kprobes.h
new file mode 100644
index 0000000..4e7bd32
--- /dev/null
+++ b/include/asm-arm/kprobes.h
@@ -0,0 +1,79 @@
+/*
+ * include/asm-arm/kprobes.h
+ *
+ * Copyright (C) 2006, 2007 Motorola Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef _ARM_KPROBES_H
+#define _ARM_KPROBES_H
+
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+
+#define ARCH_SUPPORTS_KRETPROBES
+#define __ARCH_WANT_KPROBES_INSN_SLOT
+#define MAX_INSN_SIZE 2
+#define MAX_STACK_SIZE 64 /* 32 would probably be OK */
+
+/*
+ * This undefined instruction must be unique and
+ * reserved solely for kprobes' use.
+ */
+#define KPROBE_BREAKPOINT_INSTRUCTION 0xe7f001f8
+
+#define regs_return_value(regs) ((regs)->ARM_r0)
+#define flush_insn_slot(p) do { } while (0)
+#define kretprobe_blacklist_size 0
+
+typedef u32 kprobe_opcode_t;
+
+struct kprobe;
+typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *);
+
+/* Architecture specific copy of original instruction. */
+struct arch_specific_insn {
+ kprobe_opcode_t *insn;
+ kprobe_insn_handler_t *insn_handler;
+};
+
+struct prev_kprobe {
+ struct kprobe *kp;
+ unsigned int status;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+ unsigned int kprobe_status;
+ struct prev_kprobe prev_kprobe;
+ struct pt_regs jprobe_saved_regs;
+ char jprobes_stack[MAX_STACK_SIZE];
+};
+
+void arch_remove_kprobe(struct kprobe *);
+
+int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr);
+int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
+int kprobe_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data);
+
+enum kprobe_insn {
+ INSN_REJECTED,
+ INSN_GOOD,
+ INSN_GOOD_NO_SLOT
+};
+
+enum kprobe_insn arm_kprobe_decode_insn(kprobe_opcode_t,
+ struct arch_specific_insn *);
+void __init arm_kprobe_decode_init(void);
+
+#endif /* _ARM_KPROBES_H */
diff --git a/include/asm-arm/plat-s3c24xx/dma.h b/include/asm-arm/plat-s3c24xx/dma.h
index 2c59406..c78efe3 100644
--- a/include/asm-arm/plat-s3c24xx/dma.h
+++ b/include/asm-arm/plat-s3c24xx/dma.h
@@ -32,6 +32,7 @@
struct s3c24xx_dma_addr hw_addr;
unsigned long channels[S3C2410_DMA_CHANNELS];
+ unsigned long channels_rx[S3C2410_DMA_CHANNELS];
};
struct s3c24xx_dma_selection {
@@ -41,6 +42,10 @@
void (*select)(struct s3c2410_dma_chan *chan,
struct s3c24xx_dma_map *map);
+
+ void (*direction)(struct s3c2410_dma_chan *chan,
+ struct s3c24xx_dma_map *map,
+ enum s3c2410_dmasrc dir);
};
extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
diff --git a/include/asm-arm/plat-s3c24xx/irq.h b/include/asm-arm/plat-s3c24xx/irq.h
index 8af6d95..45746a9 100644
--- a/include/asm-arm/plat-s3c24xx/irq.h
+++ b/include/asm-arm/plat-s3c24xx/irq.h
@@ -15,7 +15,9 @@
#define EXTINT_OFF (IRQ_EINT4 - 4)
+/* these are exported for arch/arm/mach-* usage */
extern struct irq_chip s3c_irq_level_chip;
+extern struct irq_chip s3c_irq_chip;
static inline void
s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
diff --git a/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h b/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h
new file mode 100644
index 0000000..25d4058
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h
@@ -0,0 +1,72 @@
+/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h
+ *
+ * Copyright 2007 Simtec Electronics <linux@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2412 IIS register definition
+*/
+
+#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H
+#define __ASM_ARCH_REGS_S3C2412_IIS_H
+
+#define S3C2412_IISCON (0x00)
+#define S3C2412_IISMOD (0x04)
+#define S3C2412_IISFIC (0x08)
+#define S3C2412_IISPSR (0x0C)
+#define S3C2412_IISTXD (0x10)
+#define S3C2412_IISRXD (0x14)
+
+#define S3C2412_IISCON_LRINDEX (1 << 11)
+#define S3C2412_IISCON_TXFIFO_EMPTY (1 << 10)
+#define S3C2412_IISCON_RXFIFO_EMPTY (1 << 9)
+#define S3C2412_IISCON_TXFIFO_FULL (1 << 8)
+#define S3C2412_IISCON_RXFIFO_FULL (1 << 7)
+#define S3C2412_IISCON_TXDMA_PAUSE (1 << 6)
+#define S3C2412_IISCON_RXDMA_PAUSE (1 << 5)
+#define S3C2412_IISCON_TXCH_PAUSE (1 << 4)
+#define S3C2412_IISCON_RXCH_PAUSE (1 << 3)
+#define S3C2412_IISCON_TXDMA_ACTIVE (1 << 2)
+#define S3C2412_IISCON_RXDMA_ACTIVE (1 << 1)
+#define S3C2412_IISCON_IIS_ACTIVE (1 << 0)
+
+#define S3C2412_IISMOD_MASTER_INTERNAL (0 << 10)
+#define S3C2412_IISMOD_MASTER_EXTERNAL (1 << 10)
+#define S3C2412_IISMOD_SLAVE (2 << 10)
+#define S3C2412_IISMOD_MASTER_MASK (3 << 10)
+#define S3C2412_IISMOD_MODE_TXONLY (0 << 8)
+#define S3C2412_IISMOD_MODE_RXONLY (1 << 8)
+#define S3C2412_IISMOD_MODE_TXRX (2 << 8)
+#define S3C2412_IISMOD_MODE_MASK (3 << 8)
+#define S3C2412_IISMOD_LR_LLOW (0 << 7)
+#define S3C2412_IISMOD_LR_RLOW (1 << 7)
+#define S3C2412_IISMOD_SDF_IIS (0 << 5)
+#define S3C2412_IISMOD_SDF_MSB (0 << 5)
+#define S3C2412_IISMOD_SDF_LSB (0 << 5)
+#define S3C2412_IISMOD_SDF_MASK (3 << 5)
+#define S3C2412_IISMOD_RCLK_256FS (0 << 3)
+#define S3C2412_IISMOD_RCLK_512FS (1 << 3)
+#define S3C2412_IISMOD_RCLK_384FS (2 << 3)
+#define S3C2412_IISMOD_RCLK_768FS (3 << 3)
+#define S3C2412_IISMOD_RCLK_MASK (3 << 3)
+#define S3C2412_IISMOD_BCLK_32FS (0 << 1)
+#define S3C2412_IISMOD_BCLK_48FS (1 << 1)
+#define S3C2412_IISMOD_BCLK_16FS (2 << 1)
+#define S3C2412_IISMOD_BCLK_24FS (3 << 1)
+#define S3C2412_IISMOD_BCLK_MASK (3 << 1)
+#define S3C2412_IISMOD_8BIT (1 << 0)
+
+#define S3C2412_IISPSR_PSREN (1 << 15)
+
+#define S3C2412_IISFIC_TXFLUSH (1 << 15)
+#define S3C2412_IISFIC_RXFLUSH (1 << 7)
+#define S3C2412_IISFIC_TXCOUNT(x) (((x) >> 8) & 0xf)
+#define S3C2412_IISFIC_RXCOUNT(x) (((x) >> 0) & 0xf)
+
+
+
+#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */
+
diff --git a/include/asm-arm/plat-s3c24xx/regs-spi.h b/include/asm-arm/plat-s3c24xx/regs-spi.h
index 4a499a1..ea565b0 100644
--- a/include/asm-arm/plat-s3c24xx/regs-spi.h
+++ b/include/asm-arm/plat-s3c24xx/regs-spi.h
@@ -17,6 +17,21 @@
#define S3C2410_SPCON (0x00)
+#define S3C2412_SPCON_RXFIFO_RB2 (0<<14)
+#define S3C2412_SPCON_RXFIFO_RB4 (1<<14)
+#define S3C2412_SPCON_RXFIFO_RB12 (2<<14)
+#define S3C2412_SPCON_RXFIFO_RB14 (3<<14)
+#define S3C2412_SPCON_TXFIFO_RB2 (0<<12)
+#define S3C2412_SPCON_TXFIFO_RB4 (1<<12)
+#define S3C2412_SPCON_TXFIFO_RB12 (2<<12)
+#define S3C2412_SPCON_TXFIFO_RB14 (3<<12)
+#define S3C2412_SPCON_RXFIFO_RESET (1<<11) /* RxFIFO reset */
+#define S3C2412_SPCON_TXFIFO_RESET (1<<10) /* TxFIFO reset */
+#define S3C2412_SPCON_RXFIFO_EN (1<<9) /* RxFIFO Enable */
+#define S3C2412_SPCON_TXFIFO_EN (1<<8) /* TxFIFO Enable */
+
+#define S3C2412_SPCON_DIRC_RX (1<<7)
+
#define S3C2410_SPCON_SMOD_DMA (2<<5) /* DMA mode */
#define S3C2410_SPCON_SMOD_INT (1<<5) /* interrupt mode */
#define S3C2410_SPCON_SMOD_POLL (0<<5) /* polling mode */
@@ -34,10 +49,19 @@
#define S3C2410_SPSTA (0x04)
+#define S3C2412_SPSTA_RXFIFO_AE (1<<11)
+#define S3C2412_SPSTA_TXFIFO_AE (1<<10)
+#define S3C2412_SPSTA_RXFIFO_ERROR (1<<9)
+#define S3C2412_SPSTA_TXFIFO_ERROR (1<<8)
+#define S3C2412_SPSTA_RXFIFO_FIFO (1<<7)
+#define S3C2412_SPSTA_RXFIFO_EMPTY (1<<6)
+#define S3C2412_SPSTA_TXFIFO_NFULL (1<<5)
+#define S3C2412_SPSTA_TXFIFO_EMPTY (1<<4)
+
#define S3C2410_SPSTA_DCOL (1<<2) /* Data Collision Error */
#define S3C2410_SPSTA_MULD (1<<1) /* Multi Master Error */
#define S3C2410_SPSTA_READY (1<<0) /* Data Tx/Rx ready */
-
+#define S3C2412_SPSTA_READY_ORG (1<<3)
#define S3C2410_SPPIN (0x08)
@@ -46,9 +70,13 @@
#define S3C2400_SPPIN_nCS (1<<1) /* SPI Card Select */
#define S3C2410_SPPIN_KEEP (1<<0) /* Master Out keep */
-
#define S3C2410_SPPRE (0x0C)
#define S3C2410_SPTDAT (0x10)
#define S3C2410_SPRDAT (0x14)
+#define S3C2412_TXFIFO (0x18)
+#define S3C2412_RXFIFO (0x18)
+#define S3C2412_SPFIC (0x24)
+
+
#endif /* __ASM_ARCH_REGS_SPI_H */
diff --git a/include/asm-arm/proc-fns.h b/include/asm-arm/proc-fns.h
index 5599d4e..a4ce457 100644
--- a/include/asm-arm/proc-fns.h
+++ b/include/asm-arm/proc-fns.h
@@ -185,6 +185,14 @@
# define CPU_NAME cpu_xsc3
# endif
# endif
+# ifdef CONFIG_CPU_FEROCEON
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_feroceon
+# endif
+# endif
# ifdef CONFIG_CPU_V6
# ifdef CPU_NAME
# undef MULTI_CPU
diff --git a/include/asm-arm/traps.h b/include/asm-arm/traps.h
index d4f34dc..f1541af 100644
--- a/include/asm-arm/traps.h
+++ b/include/asm-arm/traps.h
@@ -15,4 +15,13 @@
void register_undef_hook(struct undef_hook *hook);
void unregister_undef_hook(struct undef_hook *hook);
+static inline int in_exception_text(unsigned long ptr)
+{
+ extern char __exception_text_start[];
+ extern char __exception_text_end[];
+
+ return ptr >= (unsigned long)&__exception_text_start &&
+ ptr < (unsigned long)&__exception_text_end;
+}
+
#endif
diff --git a/include/asm-arm/vfp.h b/include/asm-arm/vfp.h
index bd6be9d..5f9a2cb 100644
--- a/include/asm-arm/vfp.h
+++ b/include/asm-arm/vfp.h
@@ -7,7 +7,11 @@
#define FPSID cr0
#define FPSCR cr1
+#define MVFR1 cr6
+#define MVFR0 cr7
#define FPEXC cr8
+#define FPINST cr9
+#define FPINST2 cr10
/* FPSID bits */
#define FPSID_IMPLEMENTER_BIT (24)
@@ -28,6 +32,19 @@
/* FPEXC bits */
#define FPEXC_EX (1 << 31)
#define FPEXC_EN (1 << 30)
+#define FPEXC_DEX (1 << 29)
+#define FPEXC_FP2V (1 << 28)
+#define FPEXC_VV (1 << 27)
+#define FPEXC_TFV (1 << 26)
+#define FPEXC_LENGTH_BIT (8)
+#define FPEXC_LENGTH_MASK (7 << FPEXC_LENGTH_BIT)
+#define FPEXC_IDF (1 << 7)
+#define FPEXC_IXF (1 << 4)
+#define FPEXC_UFF (1 << 3)
+#define FPEXC_OFF (1 << 2)
+#define FPEXC_DZF (1 << 1)
+#define FPEXC_IOF (1 << 0)
+#define FPEXC_TRAP_MASK (FPEXC_IDF|FPEXC_IXF|FPEXC_UFF|FPEXC_OFF|FPEXC_DZF|FPEXC_IOF)
/* FPSCR bits */
#define FPSCR_DEFAULT_NAN (1<<25)
@@ -55,20 +72,9 @@
#define FPSCR_IXC (1<<4)
#define FPSCR_IDC (1<<7)
-/*
- * VFP9-S specific.
- */
-#define FPINST cr9
-#define FPINST2 cr10
-
-/* FPEXC bits */
-#define FPEXC_FPV2 (1<<28)
-#define FPEXC_LENGTH_BIT (8)
-#define FPEXC_LENGTH_MASK (7 << FPEXC_LENGTH_BIT)
-#define FPEXC_INV (1 << 7)
-#define FPEXC_UFC (1 << 3)
-#define FPEXC_OFC (1 << 2)
-#define FPEXC_IOC (1 << 0)
+/* MVFR0 bits */
+#define MVFR0_A_SIMD_BIT (0)
+#define MVFR0_A_SIMD_MASK (0xf << MVFR0_A_SIMD_BIT)
/* Bit patterns for decoding the packaged operation descriptors */
#define VFPOPDESC_LENGTH_BIT (9)
diff --git a/include/asm-arm/vfpmacros.h b/include/asm-arm/vfpmacros.h
index 27fe028..cccb389 100644
--- a/include/asm-arm/vfpmacros.h
+++ b/include/asm-arm/vfpmacros.h
@@ -15,19 +15,33 @@
.endm
@ read all the working registers back into the VFP
- .macro VFPFLDMIA, base
+ .macro VFPFLDMIA, base, tmp
#if __LINUX_ARM_ARCH__ < 6
LDC p11, cr0, [\base],#33*4 @ FLDMIAX \base!, {d0-d15}
#else
LDC p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d0-d15}
#endif
+#ifdef CONFIG_VFPv3
+ VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0
+ and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field
+ cmp \tmp, #2 @ 32 x 64bit registers?
+ ldceql p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31}
+ addne \base, \base, #32*4 @ step over unused register space
+#endif
.endm
@ write all the working registers out of the VFP
- .macro VFPFSTMIA, base
+ .macro VFPFSTMIA, base, tmp
#if __LINUX_ARM_ARCH__ < 6
STC p11, cr0, [\base],#33*4 @ FSTMIAX \base!, {d0-d15}
#else
STC p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d0-d15}
#endif
+#ifdef CONFIG_VFPv3
+ VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0
+ and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field
+ cmp \tmp, #2 @ 32 x 64bit registers?
+ stceql p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31}
+ addne \base, \base, #32*4 @ step over unused register space
+#endif
.endm
diff --git a/include/asm-avr32/arch-at32ap/cpu.h b/include/asm-avr32/arch-at32ap/cpu.h
index 0dc2026..44d0bfa 100644
--- a/include/asm-avr32/arch-at32ap/cpu.h
+++ b/include/asm-avr32/arch-at32ap/cpu.h
@@ -30,5 +30,6 @@
#define cpu_is_at91sam9261() (0)
#define cpu_is_at91sam9263() (0)
#define cpu_is_at91sam9rl() (0)
+#define cpu_is_at91cap9() (0)
#endif /* __ASM_ARCH_CPU_H */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 49b7a4c..2483a05 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -34,83 +34,10 @@
#define BLKDEV_MIN_RQ 4
#define BLKDEV_MAX_RQ 128 /* Default maximum */
-/*
- * This is the per-process anticipatory I/O scheduler state.
- */
-struct as_io_context {
- spinlock_t lock;
-
- void (*dtor)(struct as_io_context *aic); /* destructor */
- void (*exit)(struct as_io_context *aic); /* called on task exit */
-
- unsigned long state;
- atomic_t nr_queued; /* queued reads & sync writes */
- atomic_t nr_dispatched; /* number of requests gone to the drivers */
-
- /* IO History tracking */
- /* Thinktime */
- unsigned long last_end_request;
- unsigned long ttime_total;
- unsigned long ttime_samples;
- unsigned long ttime_mean;
- /* Layout pattern */
- unsigned int seek_samples;
- sector_t last_request_pos;
- u64 seek_total;
- sector_t seek_mean;
-};
-
-struct cfq_queue;
-struct cfq_io_context {
- struct rb_node rb_node;
- void *key;
-
- struct cfq_queue *cfqq[2];
-
- struct io_context *ioc;
-
- unsigned long last_end_request;
- sector_t last_request_pos;
-
- unsigned long ttime_total;
- unsigned long ttime_samples;
- unsigned long ttime_mean;
-
- unsigned int seek_samples;
- u64 seek_total;
- sector_t seek_mean;
-
- struct list_head queue_list;
-
- void (*dtor)(struct io_context *); /* destructor */
- void (*exit)(struct io_context *); /* called on task exit */
-};
-
-/*
- * This is the per-process I/O subsystem state. It is refcounted and
- * kmalloc'ed. Currently all fields are modified in process io context
- * (apart from the atomic refcount), so require no locking.
- */
-struct io_context {
- atomic_t refcount;
- struct task_struct *task;
-
- unsigned int ioprio_changed;
-
- /*
- * For request batching
- */
- unsigned long last_waited; /* Time last woken after wait for request */
- int nr_batch_requests; /* Number of requests left in the batch */
-
- struct as_io_context *aic;
- struct rb_root cic_root;
- void *ioc_data;
-};
-
-void put_io_context(struct io_context *ioc);
+int put_io_context(struct io_context *ioc);
void exit_io_context(void);
struct io_context *get_io_context(gfp_t gfp_flags, int node);
+struct io_context *alloc_io_context(gfp_t gfp_flags, int node);
void copy_io_context(struct io_context **pdst, struct io_context **psrc);
void swap_io_context(struct io_context **ioc1, struct io_context **ioc2);
@@ -894,6 +821,12 @@
{
}
+static inline int put_io_context(struct io_context *ioc)
+{
+ return 1;
+}
+
+
#endif /* CONFIG_BLOCK */
#endif
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 796019b..e6b3f70 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -137,7 +137,6 @@
.time_slice = HZ, \
.nr_cpus_allowed = NR_CPUS, \
}, \
- .ioprio = 0, \
.tasks = LIST_HEAD_INIT(tsk.tasks), \
.ptrace_children= LIST_HEAD_INIT(tsk.ptrace_children), \
.ptrace_list = LIST_HEAD_INIT(tsk.ptrace_list), \
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
new file mode 100644
index 0000000..593b222
--- /dev/null
+++ b/include/linux/iocontext.h
@@ -0,0 +1,95 @@
+#ifndef IOCONTEXT_H
+#define IOCONTEXT_H
+
+#include <linux/radix-tree.h>
+
+/*
+ * This is the per-process anticipatory I/O scheduler state.
+ */
+struct as_io_context {
+ spinlock_t lock;
+
+ void (*dtor)(struct as_io_context *aic); /* destructor */
+ void (*exit)(struct as_io_context *aic); /* called on task exit */
+
+ unsigned long state;
+ atomic_t nr_queued; /* queued reads & sync writes */
+ atomic_t nr_dispatched; /* number of requests gone to the drivers */
+
+ /* IO History tracking */
+ /* Thinktime */
+ unsigned long last_end_request;
+ unsigned long ttime_total;
+ unsigned long ttime_samples;
+ unsigned long ttime_mean;
+ /* Layout pattern */
+ unsigned int seek_samples;
+ sector_t last_request_pos;
+ u64 seek_total;
+ sector_t seek_mean;
+};
+
+struct cfq_queue;
+struct cfq_io_context {
+ void *key;
+ unsigned long dead_key;
+
+ struct cfq_queue *cfqq[2];
+
+ struct io_context *ioc;
+
+ unsigned long last_end_request;
+ sector_t last_request_pos;
+
+ unsigned long ttime_total;
+ unsigned long ttime_samples;
+ unsigned long ttime_mean;
+
+ unsigned int seek_samples;
+ u64 seek_total;
+ sector_t seek_mean;
+
+ struct list_head queue_list;
+
+ void (*dtor)(struct io_context *); /* destructor */
+ void (*exit)(struct io_context *); /* called on task exit */
+};
+
+/*
+ * I/O subsystem state of the associated processes. It is refcounted
+ * and kmalloc'ed. These could be shared between processes.
+ */
+struct io_context {
+ atomic_t refcount;
+ atomic_t nr_tasks;
+
+ /* all the fields below are protected by this lock */
+ spinlock_t lock;
+
+ unsigned short ioprio;
+ unsigned short ioprio_changed;
+
+ /*
+ * For request batching
+ */
+ unsigned long last_waited; /* Time last woken after wait for request */
+ int nr_batch_requests; /* Number of requests left in the batch */
+
+ struct as_io_context *aic;
+ struct radix_tree_root radix_root;
+ void *ioc_data;
+};
+
+static inline struct io_context *ioc_task_link(struct io_context *ioc)
+{
+ /*
+ * if ref count is zero, don't allow sharing (ioc is going away, it's
+ * a race).
+ */
+ if (ioc && atomic_inc_not_zero(&ioc->refcount))
+ return ioc;
+
+ return NULL;
+}
+
+#endif
diff --git a/include/linux/ioprio.h b/include/linux/ioprio.h
index baf2938..2a3bb1b 100644
--- a/include/linux/ioprio.h
+++ b/include/linux/ioprio.h
@@ -2,6 +2,7 @@
#define IOPRIO_H
#include <linux/sched.h>
+#include <linux/iocontext.h>
/*
* Gives us 8 prio classes with 13-bits of data for each class
@@ -45,18 +46,18 @@
* the cpu scheduler nice value to an io priority
*/
#define IOPRIO_NORM (4)
-static inline int task_ioprio(struct task_struct *task)
+static inline int task_ioprio(struct io_context *ioc)
{
- if (ioprio_valid(task->ioprio))
- return IOPRIO_PRIO_DATA(task->ioprio);
+ if (ioprio_valid(ioc->ioprio))
+ return IOPRIO_PRIO_DATA(ioc->ioprio);
return IOPRIO_NORM;
}
-static inline int task_ioprio_class(struct task_struct *task)
+static inline int task_ioprio_class(struct io_context *ioc)
{
- if (ioprio_valid(task->ioprio))
- return IOPRIO_PRIO_CLASS(task->ioprio);
+ if (ioprio_valid(ioc->ioprio))
+ return IOPRIO_PRIO_CLASS(ioc->ioprio);
return IOPRIO_CLASS_BE;
}
diff --git a/include/linux/mv643xx.h b/include/linux/mv643xx.h
index d2ae618..69327b7 100644
--- a/include/linux/mv643xx.h
+++ b/include/linux/mv643xx.h
@@ -15,6 +15,7 @@
#include <asm/types.h>
#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
/****************************************/
/* Processor Address Space */
@@ -863,7 +864,6 @@
/* I2C Registers */
/****************************************/
-#define MV64XXX_I2C_CTLR_NAME "mv64xxx_i2c"
#define MV64XXX_I2C_OFFSET 0xc000
#define MV64XXX_I2C_REG_BLOCK_SIZE 0x0020
@@ -968,14 +968,6 @@
u32 brg_clk_freq;
};
-/* i2c Platform Device, Driver Data */
-struct mv64xxx_i2c_pdata {
- u32 freq_m;
- u32 freq_n;
- u32 timeout; /* In milliseconds */
- u32 retries;
-};
-
/* Watchdog Platform Device, Driver Data */
#define MV64x60_WDT_NAME "mv64x60_wdt"
diff --git a/include/linux/mv643xx_i2c.h b/include/linux/mv643xx_i2c.h
new file mode 100644
index 0000000..5db5152
--- /dev/null
+++ b/include/linux/mv643xx_i2c.h
@@ -0,0 +1,22 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _MV64XXX_I2C_H_
+#define _MV64XXX_I2C_H_
+
+#include <linux/types.h>
+
+#define MV64XXX_I2C_CTLR_NAME "mv64xxx_i2c"
+
+/* i2c Platform Device, Driver Data */
+struct mv64xxx_i2c_pdata {
+ u32 freq_m;
+ u32 freq_n;
+ u32 timeout; /* In milliseconds */
+};
+
+#endif /*_MV64XXX_I2C_H_*/
diff --git a/include/linux/sched.h b/include/linux/sched.h
index df5b24e..2d0546e 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -27,6 +27,7 @@
#define CLONE_NEWUSER 0x10000000 /* New user namespace */
#define CLONE_NEWPID 0x20000000 /* New pid namespace */
#define CLONE_NEWNET 0x40000000 /* New network namespace */
+#define CLONE_IO 0x80000000 /* Clone io context */
/*
* Scheduling policies
@@ -975,7 +976,6 @@
struct hlist_head preempt_notifiers;
#endif
- unsigned short ioprio;
/*
* fpu_counter contains the number of consecutive context switches
* that the FPU is used. If this is over a threshold, the lazy fpu
diff --git a/kernel/fork.c b/kernel/fork.c
index 39d22b3..314f510 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -51,6 +51,7 @@
#include <linux/random.h>
#include <linux/tty.h>
#include <linux/proc_fs.h>
+#include <linux/blkdev.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
@@ -791,6 +792,31 @@
return error;
}
+static int copy_io(unsigned long clone_flags, struct task_struct *tsk)
+{
+#ifdef CONFIG_BLOCK
+ struct io_context *ioc = current->io_context;
+
+ if (!ioc)
+ return 0;
+ /*
+ * Share io context with parent, if CLONE_IO is set
+ */
+ if (clone_flags & CLONE_IO) {
+ tsk->io_context = ioc_task_link(ioc);
+ if (unlikely(!tsk->io_context))
+ return -ENOMEM;
+ } else if (ioprio_valid(ioc->ioprio)) {
+ tsk->io_context = alloc_io_context(GFP_KERNEL, -1);
+ if (unlikely(!tsk->io_context))
+ return -ENOMEM;
+
+ tsk->io_context->ioprio = ioc->ioprio;
+ }
+#endif
+ return 0;
+}
+
/*
* Helper to unshare the files of the current task.
* We don't want to expose copy_files internals to
@@ -1156,15 +1182,17 @@
goto bad_fork_cleanup_mm;
if ((retval = copy_namespaces(clone_flags, p)))
goto bad_fork_cleanup_keys;
+ if ((retval = copy_io(clone_flags, p)))
+ goto bad_fork_cleanup_namespaces;
retval = copy_thread(0, clone_flags, stack_start, stack_size, p, regs);
if (retval)
- goto bad_fork_cleanup_namespaces;
+ goto bad_fork_cleanup_io;
if (pid != &init_struct_pid) {
retval = -ENOMEM;
pid = alloc_pid(task_active_pid_ns(p));
if (!pid)
- goto bad_fork_cleanup_namespaces;
+ goto bad_fork_cleanup_io;
if (clone_flags & CLONE_NEWPID) {
retval = pid_ns_prepare_proc(task_active_pid_ns(p));
@@ -1234,9 +1262,6 @@
/* Need tasklist lock for parent etc handling! */
write_lock_irq(&tasklist_lock);
- /* for sys_ioprio_set(IOPRIO_WHO_PGRP) */
- p->ioprio = current->ioprio;
-
/*
* The task hasn't been attached yet, so its cpus_allowed mask will
* not be changed, nor will its assigned CPU.
@@ -1328,6 +1353,8 @@
bad_fork_free_pid:
if (pid != &init_struct_pid)
free_pid(pid);
+bad_fork_cleanup_io:
+ put_io_context(p->io_context);
bad_fork_cleanup_namespaces:
exit_task_namespaces(p);
bad_fork_cleanup_keys:
diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c
index b48c729..8849041 100644
--- a/sound/oss/waveartist.c
+++ b/sound/oss/waveartist.c
@@ -835,7 +835,7 @@
static irqreturn_t
waveartist_intr(int irq, void *dev_id)
{
- wavnc_info *devc = (wavnc_info *)dev_id;
+ wavnc_info *devc = dev_id;
int irqstatus, status;
spin_lock(&waveartist_lock);