Merge branches 'bugzilla-13121+', 'bugzilla-13233', 'redhat-bugzilla-500311', 'pci-bind-oops', 'misc-2.6.30' and 'i7300_idle' into release
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index 9f09557..a12ea3b 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -18,8 +18,12 @@
Anonymous finger details are sent sequentially as separate packets of ABS
events. Only the ABS_MT events are recognized as part of a finger
packet. The end of a packet is marked by calling the input_mt_sync()
-function, which generates a SYN_MT_REPORT event. The end of multi-touch
-transfer is marked by calling the usual input_sync() function.
+function, which generates a SYN_MT_REPORT event. This instructs the
+receiver to accept the data for the current finger and prepare to receive
+another. The end of a multi-touch transfer is marked by calling the usual
+input_sync() function. This instructs the receiver to act upon events
+accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
+set of events/packets.
A set of ABS_MT events with the desired properties is defined. The events
are divided into categories, to allow for partial implementation. The
@@ -27,11 +31,26 @@
ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the
device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
of the approaching finger. Anisotropy and direction may be specified with
-ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
-more granular information may specify general shapes as blobs, i.e., as a
-sequence of rectangular shapes grouped together by an
-ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
-whether the touching tool is a finger or a pen or something else.
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The
+ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
+finger or a pen or something else. Devices with more granular information
+may specify general shapes as blobs, i.e., as a sequence of rectangular
+shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
+that currently support it, the ABS_MT_TRACKING_ID event may be used to
+report finger tracking from hardware [5].
+
+Here is what a minimal event sequence for a two-finger touch would look
+like:
+
+ ABS_MT_TOUCH_MAJOR
+ ABS_MT_POSITION_X
+ ABS_MT_POSITION_Y
+ SYN_MT_REPORT
+ ABS_MT_TOUCH_MAJOR
+ ABS_MT_POSITION_X
+ ABS_MT_POSITION_Y
+ SYN_MT_REPORT
+ SYN_REPORT
Event Semantics
@@ -44,24 +63,24 @@
The length of the major axis of the contact. The length should be given in
surface units. If the surface has an X times Y resolution, the largest
-possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
+possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4].
ABS_MT_TOUCH_MINOR
The length, in surface units, of the minor axis of the contact. If the
-contact is circular, this event can be omitted.
+contact is circular, this event can be omitted [4].
ABS_MT_WIDTH_MAJOR
The length, in surface units, of the major axis of the approaching
tool. This should be understood as the size of the tool itself. The
orientation of the contact and the approaching tool are assumed to be the
-same.
+same [4].
ABS_MT_WIDTH_MINOR
The length, in surface units, of the minor axis of the approaching
-tool. Omit if circular.
+tool. Omit if circular [4].
The above four values can be used to derive additional information about
the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
@@ -70,14 +89,17 @@
ABS_MT_ORIENTATION
-The orientation of the ellipse. The value should describe half a revolution
-clockwise around the touch center. The scale of the value is arbitrary, but
-zero should be returned for an ellipse aligned along the Y axis of the
-surface. As an example, an index finger placed straight onto the axis could
-return zero orientation, something negative when twisted to the left, and
-something positive when twisted to the right. This value can be omitted if
-the touching object is circular, or if the information is not available in
-the kernel driver.
+The orientation of the ellipse. The value should describe a signed quarter
+of a revolution clockwise around the touch center. The signed value range
+is arbitrary, but zero should be returned for a finger aligned along the Y
+axis of the surface, a negative value when finger is turned to the left, and
+a positive value when finger turned to the right. When completely aligned with
+the X axis, the range max should be returned. Orientation can be omitted
+if the touching object is circular, or if the information is not available
+in the kernel driver. Partial orientation support is possible if the device
+can distinguish between the two axis, but not (uniquely) any values in
+between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1]
+[4].
ABS_MT_POSITION_X
@@ -98,8 +120,35 @@
The BLOB_ID groups several packets together into one arbitrarily shaped
contact. This is a low-level anonymous grouping, and should not be confused
-with the high-level contactID, explained below. Most kernel drivers will
-not have this capability, and can safely omit the event.
+with the high-level trackingID [5]. Most kernel drivers will not have blob
+capability, and can safely omit the event.
+
+ABS_MT_TRACKING_ID
+
+The TRACKING_ID identifies an initiated contact throughout its life cycle
+[5]. There are currently only a few devices that support it, so this event
+should normally be omitted.
+
+
+Event Computation
+-----------------
+
+The flora of different hardware unavoidably leads to some devices fitting
+better to the MT protocol than others. To simplify and unify the mapping,
+this section gives recipes for how to compute certain events.
+
+For devices reporting contacts as rectangular shapes, signed orientation
+cannot be obtained. Assuming X and Y are the lengths of the sides of the
+touching rectangle, here is a simple formula that retains the most
+information possible:
+
+ ABS_MT_TOUCH_MAJOR := max(X, Y)
+ ABS_MT_TOUCH_MINOR := min(X, Y)
+ ABS_MT_ORIENTATION := bool(X > Y)
+
+The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that
+the device can distinguish between a finger along the Y axis (0) and a
+finger along the X axis (1).
Finger Tracking
@@ -109,14 +158,18 @@
anonymous contacts currently on the surface. The order in which the packets
appear in the event stream is not important.
-The process of finger tracking, i.e., to assign a unique contactID to each
+The process of finger tracking, i.e., to assign a unique trackingID to each
initiated contact on the surface, is left to user space; preferably the
-multi-touch X driver [3]. In that driver, the contactID stays the same and
+multi-touch X driver [3]. In that driver, the trackingID stays the same and
unique until the contact vanishes (when the finger leaves the surface). The
problem of assigning a set of anonymous fingers to a set of identified
fingers is a euclidian bipartite matching problem at each event update, and
relies on a sufficiently rapid update rate.
+There are a few devices that support trackingID in hardware. User space can
+make use of these native identifiers to reduce bandwidth and cpu usage.
+
+
Notes
-----
@@ -136,5 +189,7 @@
time of writing (April 2009), the MT protocol is not yet merged, and the
prototype implements finger matching, basic mouse support and two-finger
scrolling. The project aims at improving the quality of current multi-touch
-functionality available in the synaptics X driver, and in addition
+functionality available in the Synaptics X driver, and in addition
implement more advanced gestures.
+[4] See the section on event computation.
+[5] See the section on finger tracking.
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index bba2dbb..cfac20c 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -104,6 +104,11 @@
When this value is greater than 1, the driver will show the
stack trace additionally. This may help the debugging.
+ Since 2.6.30, this option also enables the hwptr check using
+ jiffies. This detects spontaneous invalid pointer callback
+ values, but can be lead to too much corrections for a (mostly
+ buggy) hardware that doesn't give smooth pointer updates.
+
card*/pcm*/sub*/info
The general information of this PCM sub-stream.
diff --git a/MAINTAINERS b/MAINTAINERS
index 77cbfb1..41c6605 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -434,7 +434,7 @@
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
P: Thomas Dahlmann
-M: thomas.dahlmann@amd.com
+M: dahlmann.thomas@arcor.de
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: drivers/usb/gadget/amd5536udc.*
@@ -1132,17 +1132,17 @@
F: include/linux/bfs_fs.h
BLACKFIN ARCHITECTURE
-P: Bryan Wu
-M: cooloney@kernel.org
+P: Mike Frysinger
+M: vapier@gentoo.org
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: arch/blackfin/
BLACKFIN EMAC DRIVER
-P: Bryan Wu
-M: cooloney@kernel.org
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+P: Michael Hennerich
+M: michael.hennerich@analog.com
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/net/bfin_mac.*
@@ -1150,7 +1150,7 @@
BLACKFIN RTC DRIVER
P: Mike Frysinger
M: vapier.adi@gmail.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/rtc/rtc-bfin.c
@@ -1158,7 +1158,7 @@
BLACKFIN SERIAL DRIVER
P: Sonic Zhang
M: sonic.zhang@analog.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/serial/bfin_5xx.c
@@ -1166,7 +1166,7 @@
BLACKFIN WATCHDOG DRIVER
P: Mike Frysinger
M: vapier.adi@gmail.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/watchdog/bfin_wdt.c
@@ -1174,7 +1174,7 @@
BLACKFIN I2C TWI DRIVER
P: Sonic Zhang
M: sonic.zhang@analog.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org/
S: Supported
F: drivers/i2c/busses/i2c-bfin-twi.c
@@ -1971,8 +1971,8 @@
EDAC-E752X
P: Mark Gross
-P: Doug Thompson
M: mark.gross@intel.com
+P: Doug Thompson
M: dougthompson@xmission.com
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h
index 1d77e51..59426a4 100644
--- a/arch/arm/include/asm/flat.h
+++ b/arch/arm/include/asm/flat.h
@@ -5,9 +5,6 @@
#ifndef __ARM_FLAT_H__
#define __ARM_FLAT_H__
-/* An odd number of words will be pushed after this alignment, so
- deliberately misalign the value. */
-#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4)
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
diff --git a/arch/blackfin/include/asm/.gitignore b/arch/blackfin/include/asm/.gitignore
deleted file mode 100644
index 7858564..0000000
--- a/arch/blackfin/include/asm/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-+mach
diff --git a/arch/blackfin/include/asm/flat.h b/arch/blackfin/include/asm/flat.h
index e70074e..733a178 100644
--- a/arch/blackfin/include/asm/flat.h
+++ b/arch/blackfin/include/asm/flat.h
@@ -10,7 +10,6 @@
#include <asm/unaligned.h>
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h
index 1e57b63..cf5066d 100644
--- a/arch/blackfin/include/asm/unistd.h
+++ b/arch/blackfin/include/asm/unistd.h
@@ -378,8 +378,10 @@
#define __NR_dup3 363
#define __NR_pipe2 364
#define __NR_inotify_init1 365
+#define __NR_preadv 366
+#define __NR_pwritev 367
-#define __NR_syscall 366
+#define __NR_syscall 368
#define NR_syscalls __NR_syscall
/* Old optional stuff no one actually uses */
diff --git a/arch/blackfin/kernel/.gitignore b/arch/blackfin/kernel/.gitignore
new file mode 100644
index 0000000..c5f676c
--- /dev/null
+++ b/arch/blackfin/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/blackfin/lib/strncmp.c b/arch/blackfin/lib/strncmp.c
index 2aaae78..46518b1 100644
--- a/arch/blackfin/lib/strncmp.c
+++ b/arch/blackfin/lib/strncmp.c
@@ -8,9 +8,8 @@
#define strncmp __inline_strncmp
#include <asm/string.h>
-#undef strncmp
-
#include <linux/module.h>
+#undef strncmp
int strncmp(const char *cs, const char *ct, size_t count)
{
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 21e65a3..a063a43 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -1581,6 +1581,8 @@
.long _sys_dup3
.long _sys_pipe2
.long _sys_inotify_init1 /* 365 */
+ .long _sys_preadv
+ .long _sys_pwritev
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall
diff --git a/arch/h8300/include/asm/flat.h b/arch/h8300/include/asm/flat.h
index 2a87350..bd12b31 100644
--- a/arch/h8300/include/asm/flat.h
+++ b/arch/h8300/include/asm/flat.h
@@ -5,7 +5,6 @@
#ifndef __H8300_FLAT_H__
#define __H8300_FLAT_H__
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) 1
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
diff --git a/arch/m32r/include/asm/flat.h b/arch/m32r/include/asm/flat.h
index d851cf0..5d711c4 100644
--- a/arch/m32r/include/asm/flat.h
+++ b/arch/m32r/include/asm/flat.h
@@ -12,7 +12,6 @@
#ifndef __ASM_M32R_FLAT_H
#define __ASM_M32R_FLAT_H
-#define flat_stack_align(sp) (*sp += (*sp & 3 ? (4 - (*sp & 3)): 0))
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_set_persistent(relval, p) 0
diff --git a/arch/m68k/include/asm/flat.h b/arch/m68k/include/asm/flat.h
index 814b517..a0e2907 100644
--- a/arch/m68k/include/asm/flat.h
+++ b/arch/m68k/include/asm/flat.h
@@ -5,7 +5,6 @@
#ifndef __M68KNOMMU_FLAT_H__
#define __M68KNOMMU_FLAT_H__
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a0d1146..cdc9a6f 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -868,6 +868,18 @@
default "0x80000000" if PPC_PREP || PPC_8xx
default "0xc0000000"
+config CONSISTENT_SIZE_BOOL
+ bool "Set custom consistent memory pool size"
+ depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+ help
+ This option allows you to set the size of the
+ consistent memory pool. This pool of virtual memory
+ is used to make consistent memory allocations.
+
+config CONSISTENT_SIZE
+ hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
+ default "0x00200000" if NOT_COHERENT_CACHE
+
config PIN_TLB
bool "Pinned Kernel TLBs (860 ONLY)"
depends on ADVANCED_OPTIONS && 8xx
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index c69f2b5..cb448d6 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -26,7 +26,9 @@
* allocate the space "normally" and use the cache management functions
* to ensure it is consistent.
*/
-extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp);
+struct device;
+extern void *__dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *handle, gfp_t gfp);
extern void __dma_free_coherent(size_t size, void *vaddr);
extern void __dma_sync(void *vaddr, size_t size, int direction);
extern void __dma_sync_page(struct page *page, unsigned long offset,
@@ -37,7 +39,7 @@
* Cache coherent cores.
*/
-#define __dma_alloc_coherent(gfp, size, handle) NULL
+#define __dma_alloc_coherent(dev, gfp, size, handle) NULL
#define __dma_free_coherent(size, addr) ((void)0)
#define __dma_sync(addr, size, rw) ((void)0)
#define __dma_sync_page(pg, off, sz, rw) ((void)0)
diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h
index d60fd18..f1f4e23 100644
--- a/arch/powerpc/include/asm/fixmap.h
+++ b/arch/powerpc/include/asm/fixmap.h
@@ -14,8 +14,6 @@
#ifndef _ASM_FIXMAP_H
#define _ASM_FIXMAP_H
-extern unsigned long FIXADDR_TOP;
-
#ifndef __ASSEMBLY__
#include <linux/kernel.h>
#include <asm/page.h>
@@ -24,6 +22,8 @@
#include <asm/kmap_types.h>
#endif
+#define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE))
+
/*
* Here we define all the compile-time 'special' virtual
* addresses. The point is to have a constant address at
diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index ba45c99..c9ff9d7 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -10,7 +10,7 @@
extern unsigned long va_to_phys(unsigned long address);
extern pte_t *va_to_pte(unsigned long address);
-extern unsigned long ioremap_bot, ioremap_base;
+extern unsigned long ioremap_bot;
#ifdef CONFIG_44x
extern int icache_44x_need_flush;
@@ -56,8 +56,30 @@
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
/*
+ * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary
+ * value (for now) on others, from where we can start layout kernel
+ * virtual space that goes below PKMAP and FIXMAP
+ */
+#ifdef CONFIG_HIGHMEM
+#define KVIRT_TOP PKMAP_BASE
+#else
+#define KVIRT_TOP (0xfe000000UL) /* for now, could be FIXMAP_BASE ? */
+#endif
+
+/*
+ * ioremap_bot starts at that address. Early ioremaps move down from there,
+ * until mem_init() at which point this becomes the top of the vmalloc
+ * and ioremap space
+ */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define IOREMAP_TOP ((KVIRT_TOP - CONFIG_CONSISTENT_SIZE) & PAGE_MASK)
+#else
+#define IOREMAP_TOP KVIRT_TOP
+#endif
+
+/*
* Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 64MB value just means that there will be a 64MB "hole" after the
+ * current 16MB value just means that there will be a 64MB "hole" after the
* physical memory until the kernel virtual memory starts. That means that
* any out-of-bounds memory accesses will hopefully be caught.
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 53c7788..6b02793 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -32,7 +32,7 @@
{
void *ret;
#ifdef CONFIG_NOT_COHERENT_CACHE
- ret = __dma_alloc_coherent(size, dma_handle, flag);
+ ret = __dma_alloc_coherent(dev, size, dma_handle, flag);
if (ret == NULL)
return NULL;
*dma_handle += get_dma_direct_offset(dev);
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 8db3527..29b742b 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -18,7 +18,6 @@
memcpy_64.o usercopy_64.o mem_64.o string.o
obj-$(CONFIG_XMON) += sstep.o
obj-$(CONFIG_KPROBES) += sstep.o
-obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
ifeq ($(CONFIG_PPC64),y)
obj-$(CONFIG_SMP) += locks.o
diff --git a/arch/powerpc/lib/dma-noncoherent.c b/arch/powerpc/lib/dma-noncoherent.c
deleted file mode 100644
index 005a28d..0000000
--- a/arch/powerpc/lib/dma-noncoherent.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * PowerPC version derived from arch/arm/mm/consistent.c
- * Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
- *
- * Copyright (C) 2000 Russell King
- *
- * Consistent memory allocators. Used for DMA devices that want to
- * share uncached memory with the processor core. The function return
- * is the virtual address and 'dma_handle' is the physical address.
- * Mostly stolen from the ARM port, with some changes for PowerPC.
- * -- Dan
- *
- * Reorganized to get rid of the arch-specific consistent_* functions
- * and provide non-coherent implementations for the DMA API. -Matt
- *
- * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent()
- * implementation. This is pulled straight from ARM and barely
- * modified. -Matt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/highmem.h>
-#include <linux/dma-mapping.h>
-#include <linux/vmalloc.h>
-
-#include <asm/tlbflush.h>
-
-/*
- * Allocate DMA-coherent memory space and return both the kernel remapped
- * virtual and bus address for that space.
- */
-void *
-__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp)
-{
- struct page *page;
- unsigned long order;
- int i;
- unsigned int nr_pages = PAGE_ALIGN(size)>>PAGE_SHIFT;
- unsigned int array_size = nr_pages * sizeof(struct page *);
- struct page **pages;
- struct page *end;
- u64 mask = 0x00ffffff, limit; /* ISA default */
- struct vm_struct *area;
-
- BUG_ON(!mem_init_done);
- size = PAGE_ALIGN(size);
- limit = (mask + 1) & ~mask;
- if (limit && size >= limit) {
- printk(KERN_WARNING "coherent allocation too big (requested "
- "%#x mask %#Lx)\n", size, mask);
- return NULL;
- }
-
- order = get_order(size);
-
- if (mask != 0xffffffff)
- gfp |= GFP_DMA;
-
- page = alloc_pages(gfp, order);
- if (!page)
- goto no_page;
-
- end = page + (1 << order);
-
- /*
- * Invalidate any data that might be lurking in the
- * kernel direct-mapped region for device DMA.
- */
- {
- unsigned long kaddr = (unsigned long)page_address(page);
- memset(page_address(page), 0, size);
- flush_dcache_range(kaddr, kaddr + size);
- }
-
- split_page(page, order);
-
- /*
- * Set the "dma handle"
- */
- *handle = page_to_phys(page);
-
- area = get_vm_area_caller(size, VM_IOREMAP,
- __builtin_return_address(1));
- if (!area)
- goto out_free_pages;
-
- if (array_size > PAGE_SIZE) {
- pages = vmalloc(array_size);
- area->flags |= VM_VPAGES;
- } else {
- pages = kmalloc(array_size, GFP_KERNEL);
- }
- if (!pages)
- goto out_free_area;
-
- area->pages = pages;
- area->nr_pages = nr_pages;
-
- for (i = 0; i < nr_pages; i++)
- pages[i] = page + i;
-
- if (map_vm_area(area, pgprot_noncached(PAGE_KERNEL), &pages))
- goto out_unmap;
-
- /*
- * Free the otherwise unused pages.
- */
- page += nr_pages;
- while (page < end) {
- __free_page(page);
- page++;
- }
-
- return area->addr;
-out_unmap:
- vunmap(area->addr);
- if (array_size > PAGE_SIZE)
- vfree(pages);
- else
- kfree(pages);
- goto out_free_pages;
-out_free_area:
- free_vm_area(area);
-out_free_pages:
- if (page)
- __free_pages(page, order);
-no_page:
- return NULL;
-}
-EXPORT_SYMBOL(__dma_alloc_coherent);
-
-/*
- * free a page as defined by the above mapping.
- */
-void __dma_free_coherent(size_t size, void *vaddr)
-{
- vfree(vaddr);
-
-}
-EXPORT_SYMBOL(__dma_free_coherent);
-
-/*
- * make an area consistent.
- */
-void __dma_sync(void *vaddr, size_t size, int direction)
-{
- unsigned long start = (unsigned long)vaddr;
- unsigned long end = start + size;
-
- switch (direction) {
- case DMA_NONE:
- BUG();
- case DMA_FROM_DEVICE:
- /*
- * invalidate only when cache-line aligned otherwise there is
- * the potential for discarding uncommitted data from the cache
- */
- if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
- flush_dcache_range(start, end);
- else
- invalidate_dcache_range(start, end);
- break;
- case DMA_TO_DEVICE: /* writeback only */
- clean_dcache_range(start, end);
- break;
- case DMA_BIDIRECTIONAL: /* writeback and invalidate */
- flush_dcache_range(start, end);
- break;
- }
-}
-EXPORT_SYMBOL(__dma_sync);
-
-#ifdef CONFIG_HIGHMEM
-/*
- * __dma_sync_page() implementation for systems using highmem.
- * In this case, each page of a buffer must be kmapped/kunmapped
- * in order to have a virtual address for __dma_sync(). This must
- * not sleep so kmap_atomic()/kunmap_atomic() are used.
- *
- * Note: yes, it is possible and correct to have a buffer extend
- * beyond the first page.
- */
-static inline void __dma_sync_page_highmem(struct page *page,
- unsigned long offset, size_t size, int direction)
-{
- size_t seg_size = min((size_t)(PAGE_SIZE - offset), size);
- size_t cur_size = seg_size;
- unsigned long flags, start, seg_offset = offset;
- int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE;
- int seg_nr = 0;
-
- local_irq_save(flags);
-
- do {
- start = (unsigned long)kmap_atomic(page + seg_nr,
- KM_PPC_SYNC_PAGE) + seg_offset;
-
- /* Sync this buffer segment */
- __dma_sync((void *)start, seg_size, direction);
- kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE);
- seg_nr++;
-
- /* Calculate next buffer segment size */
- seg_size = min((size_t)PAGE_SIZE, size - cur_size);
-
- /* Add the segment size to our running total */
- cur_size += seg_size;
- seg_offset = 0;
- } while (seg_nr < nr_segs);
-
- local_irq_restore(flags);
-}
-#endif /* CONFIG_HIGHMEM */
-
-/*
- * __dma_sync_page makes memory consistent. identical to __dma_sync, but
- * takes a struct page instead of a virtual address
- */
-void __dma_sync_page(struct page *page, unsigned long offset,
- size_t size, int direction)
-{
-#ifdef CONFIG_HIGHMEM
- __dma_sync_page_highmem(page, offset, size, direction);
-#else
- unsigned long start = (unsigned long)page_address(page) + offset;
- __dma_sync((void *)start, size, direction);
-#endif
-}
-EXPORT_SYMBOL(__dma_sync_page);
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 17290bc..b746f4c 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -26,3 +26,4 @@
obj-$(CONFIG_PPC_MM_SLICES) += slice.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o
+obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c
new file mode 100644
index 0000000..36692f5
--- /dev/null
+++ b/arch/powerpc/mm/dma-noncoherent.c
@@ -0,0 +1,400 @@
+/*
+ * PowerPC version derived from arch/arm/mm/consistent.c
+ * Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
+ *
+ * Copyright (C) 2000 Russell King
+ *
+ * Consistent memory allocators. Used for DMA devices that want to
+ * share uncached memory with the processor core. The function return
+ * is the virtual address and 'dma_handle' is the physical address.
+ * Mostly stolen from the ARM port, with some changes for PowerPC.
+ * -- Dan
+ *
+ * Reorganized to get rid of the arch-specific consistent_* functions
+ * and provide non-coherent implementations for the DMA API. -Matt
+ *
+ * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent()
+ * implementation. This is pulled straight from ARM and barely
+ * modified. -Matt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/highmem.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/tlbflush.h>
+
+#include "mmu_decl.h"
+
+/*
+ * This address range defaults to a value that is safe for all
+ * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It
+ * can be further configured for specific applications under
+ * the "Advanced Setup" menu. -Matt
+ */
+#define CONSISTENT_BASE (IOREMAP_TOP)
+#define CONSISTENT_END (CONSISTENT_BASE + CONFIG_CONSISTENT_SIZE)
+#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
+
+/*
+ * This is the page table (2MB) covering uncached, DMA consistent allocations
+ */
+static DEFINE_SPINLOCK(consistent_lock);
+
+/*
+ * VM region handling support.
+ *
+ * This should become something generic, handling VM region allocations for
+ * vmalloc and similar (ioremap, module space, etc).
+ *
+ * I envisage vmalloc()'s supporting vm_struct becoming:
+ *
+ * struct vm_struct {
+ * struct vm_region region;
+ * unsigned long flags;
+ * struct page **pages;
+ * unsigned int nr_pages;
+ * unsigned long phys_addr;
+ * };
+ *
+ * get_vm_area() would then call vm_region_alloc with an appropriate
+ * struct vm_region head (eg):
+ *
+ * struct vm_region vmalloc_head = {
+ * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list),
+ * .vm_start = VMALLOC_START,
+ * .vm_end = VMALLOC_END,
+ * };
+ *
+ * However, vmalloc_head.vm_start is variable (typically, it is dependent on
+ * the amount of RAM found at boot time.) I would imagine that get_vm_area()
+ * would have to initialise this each time prior to calling vm_region_alloc().
+ */
+struct ppc_vm_region {
+ struct list_head vm_list;
+ unsigned long vm_start;
+ unsigned long vm_end;
+};
+
+static struct ppc_vm_region consistent_head = {
+ .vm_list = LIST_HEAD_INIT(consistent_head.vm_list),
+ .vm_start = CONSISTENT_BASE,
+ .vm_end = CONSISTENT_END,
+};
+
+static struct ppc_vm_region *
+ppc_vm_region_alloc(struct ppc_vm_region *head, size_t size, gfp_t gfp)
+{
+ unsigned long addr = head->vm_start, end = head->vm_end - size;
+ unsigned long flags;
+ struct ppc_vm_region *c, *new;
+
+ new = kmalloc(sizeof(struct ppc_vm_region), gfp);
+ if (!new)
+ goto out;
+
+ spin_lock_irqsave(&consistent_lock, flags);
+
+ list_for_each_entry(c, &head->vm_list, vm_list) {
+ if ((addr + size) < addr)
+ goto nospc;
+ if ((addr + size) <= c->vm_start)
+ goto found;
+ addr = c->vm_end;
+ if (addr > end)
+ goto nospc;
+ }
+
+ found:
+ /*
+ * Insert this entry _before_ the one we found.
+ */
+ list_add_tail(&new->vm_list, &c->vm_list);
+ new->vm_start = addr;
+ new->vm_end = addr + size;
+
+ spin_unlock_irqrestore(&consistent_lock, flags);
+ return new;
+
+ nospc:
+ spin_unlock_irqrestore(&consistent_lock, flags);
+ kfree(new);
+ out:
+ return NULL;
+}
+
+static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsigned long addr)
+{
+ struct ppc_vm_region *c;
+
+ list_for_each_entry(c, &head->vm_list, vm_list) {
+ if (c->vm_start == addr)
+ goto out;
+ }
+ c = NULL;
+ out:
+ return c;
+}
+
+/*
+ * Allocate DMA-coherent memory space and return both the kernel remapped
+ * virtual and bus address for that space.
+ */
+void *
+__dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+ struct page *page;
+ struct ppc_vm_region *c;
+ unsigned long order;
+ u64 mask = ISA_DMA_THRESHOLD, limit;
+
+ if (dev) {
+ mask = dev->coherent_dma_mask;
+
+ /*
+ * Sanity check the DMA mask - it must be non-zero, and
+ * must be able to be satisfied by a DMA allocation.
+ */
+ if (mask == 0) {
+ dev_warn(dev, "coherent DMA mask is unset\n");
+ goto no_page;
+ }
+
+ if ((~mask) & ISA_DMA_THRESHOLD) {
+ dev_warn(dev, "coherent DMA mask %#llx is smaller "
+ "than system GFP_DMA mask %#llx\n",
+ mask, (unsigned long long)ISA_DMA_THRESHOLD);
+ goto no_page;
+ }
+ }
+
+
+ size = PAGE_ALIGN(size);
+ limit = (mask + 1) & ~mask;
+ if ((limit && size >= limit) ||
+ size >= (CONSISTENT_END - CONSISTENT_BASE)) {
+ printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n",
+ size, mask);
+ return NULL;
+ }
+
+ order = get_order(size);
+
+ /* Might be useful if we ever have a real legacy DMA zone... */
+ if (mask != 0xffffffff)
+ gfp |= GFP_DMA;
+
+ page = alloc_pages(gfp, order);
+ if (!page)
+ goto no_page;
+
+ /*
+ * Invalidate any data that might be lurking in the
+ * kernel direct-mapped region for device DMA.
+ */
+ {
+ unsigned long kaddr = (unsigned long)page_address(page);
+ memset(page_address(page), 0, size);
+ flush_dcache_range(kaddr, kaddr + size);
+ }
+
+ /*
+ * Allocate a virtual address in the consistent mapping region.
+ */
+ c = ppc_vm_region_alloc(&consistent_head, size,
+ gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
+ if (c) {
+ unsigned long vaddr = c->vm_start;
+ struct page *end = page + (1 << order);
+
+ split_page(page, order);
+
+ /*
+ * Set the "dma handle"
+ */
+ *handle = page_to_phys(page);
+
+ do {
+ SetPageReserved(page);
+ map_page(vaddr, page_to_phys(page),
+ pgprot_noncached(PAGE_KERNEL));
+ page++;
+ vaddr += PAGE_SIZE;
+ } while (size -= PAGE_SIZE);
+
+ /*
+ * Free the otherwise unused pages.
+ */
+ while (page < end) {
+ __free_page(page);
+ page++;
+ }
+
+ return (void *)c->vm_start;
+ }
+
+ if (page)
+ __free_pages(page, order);
+ no_page:
+ return NULL;
+}
+EXPORT_SYMBOL(__dma_alloc_coherent);
+
+/*
+ * free a page as defined by the above mapping.
+ */
+void __dma_free_coherent(size_t size, void *vaddr)
+{
+ struct ppc_vm_region *c;
+ unsigned long flags, addr;
+
+ size = PAGE_ALIGN(size);
+
+ spin_lock_irqsave(&consistent_lock, flags);
+
+ c = ppc_vm_region_find(&consistent_head, (unsigned long)vaddr);
+ if (!c)
+ goto no_area;
+
+ if ((c->vm_end - c->vm_start) != size) {
+ printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
+ __func__, c->vm_end - c->vm_start, size);
+ dump_stack();
+ size = c->vm_end - c->vm_start;
+ }
+
+ addr = c->vm_start;
+ do {
+ pte_t *ptep;
+ unsigned long pfn;
+
+ ptep = pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(addr),
+ addr),
+ addr),
+ addr);
+ if (!pte_none(*ptep) && pte_present(*ptep)) {
+ pfn = pte_pfn(*ptep);
+ pte_clear(&init_mm, addr, ptep);
+ if (pfn_valid(pfn)) {
+ struct page *page = pfn_to_page(pfn);
+
+ ClearPageReserved(page);
+ __free_page(page);
+ }
+ }
+ addr += PAGE_SIZE;
+ } while (size -= PAGE_SIZE);
+
+ flush_tlb_kernel_range(c->vm_start, c->vm_end);
+
+ list_del(&c->vm_list);
+
+ spin_unlock_irqrestore(&consistent_lock, flags);
+
+ kfree(c);
+ return;
+
+ no_area:
+ spin_unlock_irqrestore(&consistent_lock, flags);
+ printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
+ __func__, vaddr);
+ dump_stack();
+}
+EXPORT_SYMBOL(__dma_free_coherent);
+
+/*
+ * make an area consistent.
+ */
+void __dma_sync(void *vaddr, size_t size, int direction)
+{
+ unsigned long start = (unsigned long)vaddr;
+ unsigned long end = start + size;
+
+ switch (direction) {
+ case DMA_NONE:
+ BUG();
+ case DMA_FROM_DEVICE:
+ /*
+ * invalidate only when cache-line aligned otherwise there is
+ * the potential for discarding uncommitted data from the cache
+ */
+ if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
+ flush_dcache_range(start, end);
+ else
+ invalidate_dcache_range(start, end);
+ break;
+ case DMA_TO_DEVICE: /* writeback only */
+ clean_dcache_range(start, end);
+ break;
+ case DMA_BIDIRECTIONAL: /* writeback and invalidate */
+ flush_dcache_range(start, end);
+ break;
+ }
+}
+EXPORT_SYMBOL(__dma_sync);
+
+#ifdef CONFIG_HIGHMEM
+/*
+ * __dma_sync_page() implementation for systems using highmem.
+ * In this case, each page of a buffer must be kmapped/kunmapped
+ * in order to have a virtual address for __dma_sync(). This must
+ * not sleep so kmap_atomic()/kunmap_atomic() are used.
+ *
+ * Note: yes, it is possible and correct to have a buffer extend
+ * beyond the first page.
+ */
+static inline void __dma_sync_page_highmem(struct page *page,
+ unsigned long offset, size_t size, int direction)
+{
+ size_t seg_size = min((size_t)(PAGE_SIZE - offset), size);
+ size_t cur_size = seg_size;
+ unsigned long flags, start, seg_offset = offset;
+ int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE;
+ int seg_nr = 0;
+
+ local_irq_save(flags);
+
+ do {
+ start = (unsigned long)kmap_atomic(page + seg_nr,
+ KM_PPC_SYNC_PAGE) + seg_offset;
+
+ /* Sync this buffer segment */
+ __dma_sync((void *)start, seg_size, direction);
+ kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE);
+ seg_nr++;
+
+ /* Calculate next buffer segment size */
+ seg_size = min((size_t)PAGE_SIZE, size - cur_size);
+
+ /* Add the segment size to our running total */
+ cur_size += seg_size;
+ seg_offset = 0;
+ } while (seg_nr < nr_segs);
+
+ local_irq_restore(flags);
+}
+#endif /* CONFIG_HIGHMEM */
+
+/*
+ * __dma_sync_page makes memory consistent. identical to __dma_sync, but
+ * takes a struct page instead of a virtual address
+ */
+void __dma_sync_page(struct page *page, unsigned long offset,
+ size_t size, int direction)
+{
+#ifdef CONFIG_HIGHMEM
+ __dma_sync_page_highmem(page, offset, size, direction);
+#else
+ unsigned long start = (unsigned long)page_address(page) + offset;
+ __dma_sync((void *)start, size, direction);
+#endif
+}
+EXPORT_SYMBOL(__dma_sync_page);
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 666a5e8..3de6a0d9 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -168,12 +168,8 @@
ppc_md.progress("MMU:mapin", 0x301);
mapin_ram();
-#ifdef CONFIG_HIGHMEM
- ioremap_base = PKMAP_BASE;
-#else
- ioremap_base = 0xfe000000UL; /* for now, could be 0xfffff000 */
-#endif /* CONFIG_HIGHMEM */
- ioremap_bot = ioremap_base;
+ /* Initialize early top-down ioremap allocator */
+ ioremap_bot = IOREMAP_TOP;
/* Map in I/O resources */
if (ppc_md.progress)
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index d0602a7..579382c 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -380,6 +380,23 @@
bsssize >> 10,
initsize >> 10);
+#ifdef CONFIG_PPC32
+ pr_info("Kernel virtual memory layout:\n");
+ pr_info(" * 0x%08lx..0x%08lx : fixmap\n", FIXADDR_START, FIXADDR_TOP);
+#ifdef CONFIG_HIGHMEM
+ pr_info(" * 0x%08lx..0x%08lx : highmem PTEs\n",
+ PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP));
+#endif /* CONFIG_HIGHMEM */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+ pr_info(" * 0x%08lx..0x%08lx : consistent mem\n",
+ IOREMAP_TOP, IOREMAP_TOP + CONFIG_CONSISTENT_SIZE);
+#endif /* CONFIG_NOT_COHERENT_CACHE */
+ pr_info(" * 0x%08lx..0x%08lx : early ioremap\n",
+ ioremap_bot, IOREMAP_TOP);
+ pr_info(" * 0x%08lx..0x%08lx : vmalloc & ioremap\n",
+ VMALLOC_START, VMALLOC_END);
+#endif /* CONFIG_PPC32 */
+
mem_init_done = 1;
}
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 430d090..5422169 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -399,8 +399,6 @@
#endif /* CONFIG_DEBUG_PAGEALLOC */
static int fixmaps;
-unsigned long FIXADDR_TOP = (-PAGE_SIZE);
-EXPORT_SYMBOL(FIXADDR_TOP);
void __set_fixmap (enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags)
{
diff --git a/arch/sh/include/asm/flat.h b/arch/sh/include/asm/flat.h
index d3b2b4f..5d84df5 100644
--- a/arch/sh/include/asm/flat.h
+++ b/arch/sh/include/asm/flat.h
@@ -12,7 +12,6 @@
#ifndef __ASM_SH_FLAT_H
#define __ASM_SH_FLAT_H
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 208ecf6..54b6de2 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -693,8 +693,8 @@
if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE &&
policy->cpuinfo.transition_latency > 20 * 1000) {
policy->cpuinfo.transition_latency = 20 * 1000;
- printk_once(KERN_INFO "Capping off P-state tranision"
- " latency at 20 uS\n");
+ printk_once(KERN_INFO
+ "P-state transition latency capped at 20 uS\n");
}
/* table init */
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index 8f307d9..f46c340 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -26,12 +26,16 @@
unsigned long sbase = saddr & PUD_MASK;
unsigned long s_end = sbase + PUD_SIZE;
+ /* Allow segments to share if only one is marked locked */
+ unsigned long vm_flags = vma->vm_flags & ~VM_LOCKED;
+ unsigned long svm_flags = svma->vm_flags & ~VM_LOCKED;
+
/*
* match the virtual addresses, permission and the alignment of the
* page table page.
*/
if (pmd_index(addr) != pmd_index(saddr) ||
- vma->vm_flags != svma->vm_flags ||
+ vm_flags != svm_flags ||
sbase < svma->vm_start || svma->vm_end < s_end)
return 0;
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 72069ba..10a2d91 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -148,6 +148,9 @@
if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT))
return;
+ if (boot_cpu_has(X86_FEATURE_AMDC1E))
+ type = ACPI_STATE_C1;
+
/*
* Check, if one of the previous states already marked the lapic
* unstable
@@ -611,6 +614,7 @@
switch (cx->type) {
case ACPI_STATE_C1:
cx->valid = 1;
+ acpi_timer_check_state(i, pr, cx);
break;
case ACPI_STATE_C2:
@@ -830,11 +834,12 @@
/* Do not access any ACPI IO ports in suspend path */
if (acpi_idle_suspend) {
- acpi_safe_halt();
local_irq_enable();
+ cpu_relax();
return 0;
}
+ acpi_state_timer_broadcast(pr, cx, 1);
kt1 = ktime_get_real();
acpi_idle_do_entry(cx);
kt2 = ktime_get_real();
@@ -842,6 +847,7 @@
local_irq_enable();
cx->usage++;
+ acpi_state_timer_broadcast(pr, cx, 0);
return idle_time;
}
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index cafb410..60e543d 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -309,9 +309,15 @@
(u32) px->bus_master_latency,
(u32) px->control, (u32) px->status));
- if (!px->core_frequency) {
- printk(KERN_ERR PREFIX
- "Invalid _PSS data: freq is zero\n");
+ /*
+ * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
+ */
+ if (!px->core_frequency ||
+ ((u32)(px->core_frequency * 1000) !=
+ (px->core_frequency * 1000))) {
+ printk(KERN_ERR FW_BUG PREFIX
+ "Invalid BIOS _PSS frequency: 0x%llx MHz\n",
+ px->core_frequency);
result = -EFAULT;
kfree(pr->performance->states);
goto end;
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 7f16f5f..2275437 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -840,7 +840,7 @@
state = acpi_get_throttling_state(pr, value);
if (state == -1) {
ACPI_WARNING((AE_INFO,
- "Invalid throttling state, reset\n"));
+ "Invalid throttling state, reset"));
state = 0;
ret = acpi_processor_set_throttling(pr, state);
if (ret)
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 810cca9..1bdfb37 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -570,6 +570,22 @@
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710Z"),
},
},
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "eMachines E510",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "EMACHINES"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "eMachines E510"),
+ },
+ },
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "Acer Aspire 5315",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
+ },
+ },
{}
};
@@ -2334,7 +2350,7 @@
return acpi_video_register();
}
-void __exit acpi_video_exit(void)
+void acpi_video_exit(void)
{
acpi_bus_unregister_driver(&acpi_video_bus);
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index dc030f1..c659961 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -700,8 +700,10 @@
}
kobject_uevent(&priv->kobj, KOBJ_ADD);
- return error;
+ return 0;
out_unregister:
+ kfree(drv->p);
+ drv->p = NULL;
kobject_put(&priv->kobj);
out_put_bus:
bus_put(bus);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 4aa527b..1977d4b 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -879,7 +879,7 @@
}
if (!dev_name(dev))
- goto done;
+ goto name_error;
pr_debug("device: '%s': %s\n", dev_name(dev), __func__);
@@ -978,6 +978,9 @@
cleanup_device_parent(dev);
if (parent)
put_device(parent);
+name_error:
+ kfree(dev->p);
+ dev->p = NULL;
goto done;
}
diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index c51f11b..8ae0f63 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -257,6 +257,10 @@
*/
void driver_unregister(struct device_driver *drv)
{
+ if (!drv || !drv->p) {
+ WARN(1, "Unexpected driver unregister!\n");
+ return;
+ }
driver_remove_groups(drv, drv->groups);
bus_remove_driver(drv);
}
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index 1955ee8..a600fc0 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -173,7 +173,7 @@
xfercap = (xfercap_scale == 0 ? -1 : (1UL << xfercap_scale));
#ifdef CONFIG_I7300_IDLE_IOAT_CHANNEL
- if (i7300_idle_platform_probe(NULL, NULL) == 0) {
+ if (i7300_idle_platform_probe(NULL, NULL, 1) == 0) {
device->common.chancnt--;
}
#endif
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index e5f5c5a..956982f 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -192,16 +192,20 @@
config EDAC_AMD8131
tristate "AMD8131 HyperTransport PCI-X Tunnel"
- depends on EDAC_MM_EDAC && PCI
+ depends on EDAC_MM_EDAC && PCI && PPC_MAPLE
help
Support for error detection and correction on the
AMD8131 HyperTransport PCI-X Tunnel chip.
+ Note, add more Kconfig dependency if it's adopted
+ on some machine other than Maple.
config EDAC_AMD8111
tristate "AMD8111 HyperTransport I/O Hub"
- depends on EDAC_MM_EDAC && PCI
+ depends on EDAC_MM_EDAC && PCI && PPC_MAPLE
help
Support for error detection and correction on the
AMD8111 HyperTransport I/O Hub chip.
+ Note, add more Kconfig dependency if it's adopted
+ on some machine other than Maple.
endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index a5fdcf0..5907681 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -35,3 +35,5 @@
obj-$(CONFIG_EDAC_MV64X60) += mv64x60_edac.o
obj-$(CONFIG_EDAC_CELL) += cell_edac.o
obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o
+obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o
+obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o
diff --git a/drivers/edac/amd8111_edac.c b/drivers/edac/amd8111_edac.c
index 6146921..2cb58ef 100644
--- a/drivers/edac/amd8111_edac.c
+++ b/drivers/edac/amd8111_edac.c
@@ -389,7 +389,7 @@
dev_info->edac_dev->dev = &dev_info->dev->dev;
dev_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR;
dev_info->edac_dev->ctl_name = dev_info->ctl_name;
- dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id;
+ dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev);
if (edac_op_state == EDAC_OPSTATE_POLL)
dev_info->edac_dev->edac_check = dev_info->check;
@@ -473,7 +473,7 @@
pci_info->edac_dev->dev = &pci_info->dev->dev;
pci_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR;
pci_info->edac_dev->ctl_name = pci_info->ctl_name;
- pci_info->edac_dev->dev_name = pci_info->dev->dev.bus_id;
+ pci_info->edac_dev->dev_name = dev_name(&pci_info->dev->dev);
if (edac_op_state == EDAC_OPSTATE_POLL)
pci_info->edac_dev->edac_check = pci_info->check;
diff --git a/drivers/edac/amd8131_edac.c b/drivers/edac/amd8131_edac.c
index c083b31..b432d60 100644
--- a/drivers/edac/amd8131_edac.c
+++ b/drivers/edac/amd8131_edac.c
@@ -287,7 +287,7 @@
dev_info->edac_dev->dev = &dev_info->dev->dev;
dev_info->edac_dev->mod_name = AMD8131_EDAC_MOD_STR;
dev_info->edac_dev->ctl_name = dev_info->ctl_name;
- dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id;
+ dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev);
if (edac_op_state == EDAC_OPSTATE_POLL)
dev_info->edac_dev->edac_check = amd8131_chipset.check;
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 4cd35d8..f5d46e7 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -67,12 +67,18 @@
will load the correct one.
config DRM_I915
+ tristate "i915 driver"
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB
select FRAMEBUFFER_CONSOLE if !EMBEDDED
- tristate "i915 driver"
+ # i915 depends on ACPI_VIDEO when ACPI is enabled
+ # but for select to work, need to select ACPI_VIDEO's dependencies, ick
+ select VIDEO_OUTPUT_CONTROL if ACPI
+ select BACKLIGHT_CLASS_DEVICE if ACPI
+ select INPUT if ACPI
+ select ACPI_VIDEO if ACPI
help
Choose this option if you have a system that has Intel 830M, 845G,
852GM, 855GM 865G or 915G integrated graphics. If M is selected, the
@@ -84,12 +90,6 @@
config DRM_I915_KMS
bool "Enable modesetting on intel by default"
depends on DRM_I915
- # i915 KMS depends on ACPI_VIDEO when ACPI is enabled
- # but for select to work, need to select ACPI_VIDEO's dependencies, ick
- select VIDEO_OUTPUT_CONTROL if ACPI
- select BACKLIGHT_CLASS_DEVICE if ACPI
- select INPUT if ACPI
- select ACPI_VIDEO if ACPI
help
Choose this option if you want kernel modesetting enabled by default,
and you have a new enough userspace to support this. Running old
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 717b6a8..670d128 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1145,6 +1145,13 @@
mutex_unlock(&dev->struct_mutex);
return VM_FAULT_SIGBUS;
}
+
+ ret = i915_gem_object_set_to_gtt_domain(obj, write);
+ if (ret) {
+ mutex_unlock(&dev->struct_mutex);
+ return VM_FAULT_SIGBUS;
+ }
+
list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list);
}
@@ -2128,8 +2135,10 @@
return;
}
- pitch_val = (obj_priv->stride / 128) - 1;
- WARN_ON(pitch_val & ~0x0000000f);
+ pitch_val = obj_priv->stride / 128;
+ pitch_val = ffs(pitch_val) - 1;
+ WARN_ON(pitch_val > I830_FENCE_MAX_PITCH_VAL);
+
val = obj_priv->gtt_offset;
if (obj_priv->tiling_mode == I915_TILING_Y)
val |= 1 << I830_FENCE_TILING_Y_SHIFT;
@@ -2421,6 +2430,16 @@
if (obj_priv->pages == NULL)
return;
+ /* XXX: The 865 in particular appears to be weird in how it handles
+ * cache flushing. We haven't figured it out, but the
+ * clflush+agp_chipset_flush doesn't appear to successfully get the
+ * data visible to the PGU, while wbinvd + agp_chipset_flush does.
+ */
+ if (IS_I865G(obj->dev)) {
+ wbinvd();
+ return;
+ }
+
drm_clflush_pages(obj_priv->pages, obj->size / PAGE_SIZE);
}
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 52a0593..540dd33 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -213,7 +213,8 @@
if (tiling_mode == I915_TILING_NONE)
return true;
- if (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))
+ if (!IS_I9XX(dev) ||
+ (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)))
tile_width = 128;
else
tile_width = 512;
@@ -225,11 +226,18 @@
if (stride / 128 > I965_FENCE_MAX_PITCH_VAL)
return false;
} else if (IS_I9XX(dev)) {
- if (stride / tile_width > I830_FENCE_MAX_PITCH_VAL ||
+ uint32_t pitch_val = ffs(stride / tile_width) - 1;
+
+ /* XXX: For Y tiling, FENCE_MAX_PITCH_VAL is actually 6 (8KB)
+ * instead of 4 (2KB) on 945s.
+ */
+ if (pitch_val > I915_FENCE_MAX_PITCH_VAL ||
size > (I830_FENCE_MAX_SIZE_VAL << 20))
return false;
} else {
- if (stride / 128 > I830_FENCE_MAX_PITCH_VAL ||
+ uint32_t pitch_val = ffs(stride / tile_width) - 1;
+
+ if (pitch_val > I830_FENCE_MAX_PITCH_VAL ||
size > (I830_FENCE_MAX_SIZE_VAL << 19))
return false;
}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 9668cc0..375569d 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -190,7 +190,8 @@
#define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8)
#define I830_FENCE_PITCH_SHIFT 4
#define I830_FENCE_REG_VALID (1<<0)
-#define I830_FENCE_MAX_PITCH_VAL 0x10
+#define I915_FENCE_MAX_PITCH_VAL 0x10
+#define I830_FENCE_MAX_PITCH_VAL 6
#define I830_FENCE_MAX_SIZE_VAL (1<<8)
#define I915_FENCE_START_MASK 0x0ff00000
diff --git a/drivers/idle/i7300_idle.c b/drivers/idle/i7300_idle.c
index bf74039..949c97f 100644
--- a/drivers/idle/i7300_idle.c
+++ b/drivers/idle/i7300_idle.c
@@ -41,6 +41,10 @@
module_param_named(debug, debug, uint, 0644);
MODULE_PARM_DESC(debug, "Enable debug printks in this driver");
+static int forceload;
+module_param_named(forceload, forceload, uint, 0644);
+MODULE_PARM_DESC(debug, "Enable driver testing on unvalidated i5000");
+
#define dprintk(fmt, arg...) \
do { if (debug) printk(KERN_INFO I7300_PRINT fmt, ##arg); } while (0)
@@ -552,7 +556,7 @@
cpus_clear(idle_cpumask);
total_us = 0;
- if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev))
+ if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev, forceload))
return -ENODEV;
if (i7300_idle_thrt_save())
diff --git a/drivers/input/input.c b/drivers/input/input.c
index e54e002..5d445f4 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -42,6 +42,7 @@
ABS_MT_POSITION_Y,
ABS_MT_TOOL_TYPE,
ABS_MT_BLOB_ID,
+ ABS_MT_TRACKING_ID,
0
};
static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)];
diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c
index 67248c3..be5bbbb 100644
--- a/drivers/input/serio/libps2.c
+++ b/drivers/input/serio/libps2.c
@@ -210,7 +210,7 @@
timeout = wait_event_timeout(ps2dev->wait,
!(ps2dev->flags & PS2_FLAG_CMD1), timeout);
- if (ps2dev->cmdcnt && timeout > 0) {
+ if (ps2dev->cmdcnt && !(ps2dev->flags & PS2_FLAG_CMD1)) {
timeout = ps2_adjust_timeout(ps2dev, command, timeout);
wait_event_timeout(ps2dev->wait,
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index f100c7f..6954f55 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -419,7 +419,7 @@
#ifdef CONFIG_PM
static int ucb1400_ts_resume(struct platform_device *dev)
{
- struct ucb1400_ts *ucb = platform_get_drvdata(dev);
+ struct ucb1400_ts *ucb = dev->dev.platform_data;
if (ucb->ts_task) {
/*
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 3c3626d..5d400ae 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3811,13 +3811,13 @@
safepos = conf->reshape_safe;
sector_div(safepos, data_disks);
if (mddev->delta_disks < 0) {
- writepos -= min(reshape_sectors, writepos);
+ writepos -= min_t(sector_t, reshape_sectors, writepos);
readpos += reshape_sectors;
safepos += reshape_sectors;
} else {
writepos += reshape_sectors;
- readpos -= min(reshape_sectors, readpos);
- safepos -= min(reshape_sectors, safepos);
+ readpos -= min_t(sector_t, reshape_sectors, readpos);
+ safepos -= min_t(sector_t, reshape_sectors, safepos);
}
/* 'writepos' is the most advanced device address we might write.
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index f3548d0..40c2608 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -831,6 +831,7 @@
break;
case NAND_CMD_READID:
+ host->col_addr = 0;
send_read_id(host);
break;
@@ -867,6 +868,7 @@
mtd->priv = this;
mtd->owner = THIS_MODULE;
mtd->dev.parent = &pdev->dev;
+ mtd->name = "mxc_nand";
/* 50 us command delay time */
this->chip_delay = 5;
@@ -882,8 +884,10 @@
this->verify_buf = mxc_nand_verify_buf;
host->clk = clk_get(&pdev->dev, "nfc");
- if (IS_ERR(host->clk))
+ if (IS_ERR(host->clk)) {
+ err = PTR_ERR(host->clk);
goto eclk;
+ }
clk_enable(host->clk);
host->clk_act = 1;
@@ -896,7 +900,7 @@
host->regs = ioremap(res->start, res->end - res->start + 1);
if (!host->regs) {
- err = -EIO;
+ err = -ENOMEM;
goto eres;
}
@@ -1011,30 +1015,35 @@
#ifdef CONFIG_PM
static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct mtd_info *info = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = platform_get_drvdata(pdev);
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
int ret = 0;
DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n");
- if (info)
- ret = info->suspend(info);
-
- /* Disable the NFC clock */
- clk_disable(nfc_clk); /* FIXME */
+ if (mtd) {
+ ret = mtd->suspend(mtd);
+ /* Disable the NFC clock */
+ clk_disable(host->clk);
+ }
return ret;
}
static int mxcnd_resume(struct platform_device *pdev)
{
- struct mtd_info *info = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = platform_get_drvdata(pdev);
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
int ret = 0;
DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n");
- /* Enable the NFC clock */
- clk_enable(nfc_clk); /* FIXME */
- if (info)
- info->resume(info);
+ if (mtd) {
+ /* Enable the NFC clock */
+ clk_enable(host->clk);
+ mtd->resume(mtd);
+ }
return ret;
}
@@ -1055,13 +1064,7 @@
static int __init mxc_nd_init(void)
{
- /* Register the device driver structure. */
- pr_info("MXC MTD nand Driver\n");
- if (platform_driver_probe(&mxcnd_driver, mxcnd_probe) != 0) {
- printk(KERN_ERR "Driver register failed for mxcnd_driver\n");
- return -ENODEV;
- }
- return 0;
+ return platform_driver_probe(&mxcnd_driver, mxcnd_probe);
}
static void __exit mxc_nd_cleanup(void)
diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
index e6a7e84..ea31a45 100644
--- a/drivers/parport/parport_gsc.c
+++ b/drivers/parport/parport_gsc.c
@@ -352,8 +352,8 @@
unsigned long port;
if (!dev->irq) {
- printk(KERN_WARNING "IRQ not found for parallel device at 0x%lx\n",
- dev->hpa.start);
+ printk(KERN_WARNING "IRQ not found for parallel device at 0x%llx\n",
+ (unsigned long long)dev->hpa.start);
return -ENODEV;
}
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index b4b3981..a0127e9 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -137,6 +137,7 @@
unsigned char mcr;
unsigned char mcr_mask; /* mask of user bits */
unsigned char mcr_force; /* mask of forced bits */
+ unsigned char cur_iotype; /* Running I/O type */
/*
* Some bits in registers are cleared on a read, so they must
@@ -471,6 +472,7 @@
static void set_io_from_upio(struct uart_port *p)
{
+ struct uart_8250_port *up = (struct uart_8250_port *)p;
switch (p->iotype) {
case UPIO_HUB6:
p->serial_in = hub6_serial_in;
@@ -509,6 +511,8 @@
p->serial_out = io_serial_out;
break;
}
+ /* Remember loaded iotype */
+ up->cur_iotype = p->iotype;
}
static void
@@ -1937,6 +1941,9 @@
up->capabilities = uart_config[up->port.type].flags;
up->mcr = 0;
+ if (up->port.iotype != up->cur_iotype)
+ set_io_from_upio(port);
+
if (up->port.type == PORT_16C950) {
/* Wake up and initialize UART */
up->acr = 0;
@@ -2563,6 +2570,9 @@
if (ret < 0)
probeflags &= ~PROBE_RSA;
+ if (up->port.iotype != up->cur_iotype)
+ set_io_from_upio(port);
+
if (flags & UART_CONFIG_TYPE)
autoconfig(up, probeflags);
if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
@@ -2671,6 +2681,11 @@
{
int i;
+ for (i = 0; i < nr_uarts; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+ up->cur_iotype = 0xFF;
+ }
+
serial8250_isa_init_ports();
for (i = 0; i < nr_uarts; i++) {
diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 418b4fe..33149d9 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -39,9 +39,9 @@
*/
if (parisc_parent(dev)->id.hw_type != HPHW_IOA)
printk(KERN_INFO
- "Serial: device 0x%lx not configured.\n"
+ "Serial: device 0x%llx not configured.\n"
"Enable support for Wax, Lasi, Asp or Dino.\n",
- dev->hpa.start);
+ (unsigned long long)dev->hpa.start);
return -ENODEV;
}
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 7f72f8c..b3feb61 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -988,7 +988,7 @@
pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n",
co, co->index, options);
- if ((co->index < 0) || (co->index > MPC52xx_PSC_MAXNUM)) {
+ if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) {
pr_debug("PSC%x out of range\n", co->index);
return -EINVAL;
}
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 0716cdb..0a3dc5e 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -11,7 +11,6 @@
obj-$(CONFIG_PCI) += host/
obj-$(CONFIG_USB_EHCI_HCD) += host/
obj-$(CONFIG_USB_ISP116X_HCD) += host/
-obj-$(CONFIG_USB_ISP1760_HCD) += host/
obj-$(CONFIG_USB_OHCI_HCD) += host/
obj-$(CONFIG_USB_UHCI_HCD) += host/
obj-$(CONFIG_USB_FHCI_HCD) += host/
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 0a69c09..7a1164d 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1375,6 +1375,9 @@
{ USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
+ { USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
{ USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
},
{ USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 563d572..05c913c 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -794,7 +794,8 @@
if (ep->desc) {
list_add_tail(&req->queue, &ep->queue);
- if (ep->is_in || (ep_is_control(ep)
+ if ((!ep_is_control(ep) && ep->is_in) ||
+ (ep_is_control(ep)
&& (ep->state == DATA_STAGE_IN
|| ep->state == STATUS_STAGE_IN)))
usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
@@ -1940,7 +1941,7 @@
usba_writel(udc, CTRL, USBA_DISABLE_MASK);
clk_disable(pclk);
- usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep,
+ usba_ep = kzalloc(sizeof(struct usba_ep) * pdata->num_ep,
GFP_KERNEL);
if (!usba_ep)
goto err_alloc_ep;
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index cd07ea3..1543846 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1658,6 +1658,7 @@
u32 reg_base, or_reg, skip_reg;
unsigned long flags;
struct ptd ptd;
+ packet_enqueue *pe;
switch (usb_pipetype(urb->pipe)) {
case PIPE_ISOCHRONOUS:
@@ -1669,6 +1670,7 @@
reg_base = INT_REGS_OFFSET;
or_reg = HC_INT_IRQ_MASK_OR_REG;
skip_reg = HC_INT_PTD_SKIPMAP_REG;
+ pe = enqueue_an_INT_packet;
break;
default:
@@ -1676,6 +1678,7 @@
reg_base = ATL_REGS_OFFSET;
or_reg = HC_ATL_IRQ_MASK_OR_REG;
skip_reg = HC_ATL_PTD_SKIPMAP_REG;
+ pe = enqueue_an_ATL_packet;
break;
}
@@ -1687,6 +1690,7 @@
u32 skip_map;
u32 or_map;
struct isp1760_qtd *qtd;
+ struct isp1760_qh *qh = ints->qh;
skip_map = isp1760_readl(hcd->regs + skip_reg);
skip_map |= 1 << i;
@@ -1699,8 +1703,7 @@
priv_write_copy(priv, (u32 *)&ptd, hcd->regs + reg_base
+ i * sizeof(ptd), sizeof(ptd));
qtd = ints->qtd;
-
- clean_up_qtdlist(qtd);
+ qtd = clean_up_qtdlist(qtd);
free_mem(priv, ints->payload);
@@ -1711,7 +1714,24 @@
ints->payload = 0;
isp1760_urb_done(priv, urb, status);
+ if (qtd)
+ pe(hcd, qh, qtd);
break;
+
+ } else if (ints->qtd) {
+ struct isp1760_qtd *qtd, *prev_qtd = ints->qtd;
+
+ for (qtd = ints->qtd->hw_next; qtd; qtd = qtd->hw_next) {
+ if (qtd->urb == urb) {
+ prev_qtd->hw_next = clean_up_qtdlist(qtd);
+ isp1760_urb_done(priv, urb, status);
+ break;
+ }
+ prev_qtd = qtd;
+ }
+ /* we found the urb before the end of the list */
+ if (qtd)
+ break;
}
ints++;
}
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 0a566ee..f331e2b 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -974,6 +974,7 @@
if (retval > 0) {
/* quietly accept this device, but don't bind to a
serial port as it's about to disappear */
+ serial->num_ports = 0;
goto exit;
}
}
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 9a577a8..2fb63f6 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -29,14 +29,8 @@
/* configurable parameters */
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
-#define ATMEL_LCDC_DMA_BURST_LEN 8
-
-#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) || \
- defined(CONFIG_ARCH_AT91SAM9RL)
-#define ATMEL_LCDC_FIFO_SIZE 2048
-#else
-#define ATMEL_LCDC_FIFO_SIZE 512
-#endif
+#define ATMEL_LCDC_DMA_BURST_LEN 8 /* words */
+#define ATMEL_LCDC_FIFO_SIZE 512 /* words */
#if defined(CONFIG_ARCH_AT91)
#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 5e9c630..d3a568e 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -947,7 +947,8 @@
int win;
for (win = 0; win <= S3C_FB_MAX_WIN; win++)
- s3c_fb_release_win(sfb, sfb->windows[win]);
+ if (sfb->windows[win])
+ s3c_fb_release_win(sfb, sfb->windows[win]);
iounmap(sfb->regs);
@@ -985,11 +986,20 @@
static int s3c_fb_resume(struct platform_device *pdev)
{
struct s3c_fb *sfb = platform_get_drvdata(pdev);
+ struct s3c_fb_platdata *pd = sfb->pdata;
struct s3c_fb_win *win;
int win_no;
clk_enable(sfb->bus_clk);
+ /* setup registers */
+ writel(pd->vidcon1, sfb->regs + VIDCON1);
+
+ /* zero all windows before we do anything */
+ for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++)
+ s3c_fb_clear_win(sfb, win_no);
+
+ /* restore framebuffers */
for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) {
win = sfb->windows[win_no];
if (!win)
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 5cebf0b..697f6b5 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -41,6 +41,7 @@
#include <asm/uaccess.h>
#include <asm/unaligned.h>
#include <asm/cacheflush.h>
+#include <asm/page.h>
/****************************************************************************/
@@ -54,6 +55,18 @@
#define DBG_FLT(a...)
#endif
+/*
+ * User data (stack, data section and bss) needs to be aligned
+ * for the same reasons as SLAB memory is, and to the same amount.
+ * Avoid duplicating architecture specific code by using the same
+ * macro as with SLAB allocation:
+ */
+#ifdef ARCH_SLAB_MINALIGN
+#define FLAT_DATA_ALIGN (ARCH_SLAB_MINALIGN)
+#else
+#define FLAT_DATA_ALIGN (sizeof(void *))
+#endif
+
#define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */
#define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */
@@ -114,20 +127,18 @@
int envc = bprm->envc;
char uninitialized_var(dummy);
- sp = (unsigned long *) ((-(unsigned long)sizeof(char *))&(unsigned long) p);
+ sp = (unsigned long *)p;
+ sp -= (envc + argc + 2) + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
+ sp = (unsigned long *) ((unsigned long)sp & -FLAT_DATA_ALIGN);
+ argv = sp + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
+ envp = argv + (argc + 1);
- sp -= envc+1;
- envp = sp;
- sp -= argc+1;
- argv = sp;
-
- flat_stack_align(sp);
if (flat_argvp_envp_on_stack()) {
- --sp; put_user((unsigned long) envp, sp);
- --sp; put_user((unsigned long) argv, sp);
+ put_user((unsigned long) envp, sp + 2);
+ put_user((unsigned long) argv, sp + 1);
}
- put_user(argc,--sp);
+ put_user(argc, sp);
current->mm->arg_start = (unsigned long) p;
while (argc-->0) {
put_user((unsigned long) p, argv++);
@@ -558,7 +569,9 @@
ret = realdatastart;
goto err;
}
- datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long);
+ datapos = ALIGN(realdatastart +
+ MAX_SHARED_LIBS * sizeof(unsigned long),
+ FLAT_DATA_ALIGN);
DBG_FLT("BINFMT_FLAT: Allocated data+bss+stack (%d bytes): %x\n",
(int)(data_len + bss_len + stack_len), (int)datapos);
@@ -604,9 +617,12 @@
}
realdatastart = textpos + ntohl(hdr->data_start);
- datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long);
- reloc = (unsigned long *) (textpos + ntohl(hdr->reloc_start) +
- MAX_SHARED_LIBS * sizeof(unsigned long));
+ datapos = ALIGN(realdatastart +
+ MAX_SHARED_LIBS * sizeof(unsigned long),
+ FLAT_DATA_ALIGN);
+
+ reloc = (unsigned long *)
+ (datapos + (ntohl(hdr->reloc_start) - text_len));
memp = textpos;
memp_size = len;
#ifdef CONFIG_BINFMT_ZFLAT
@@ -854,7 +870,7 @@
stack_len = TOP_OF_ARGS - bprm->p; /* the strings */
stack_len += (bprm->argc + 1) * sizeof(char *); /* the argv array */
stack_len += (bprm->envc + 1) * sizeof(char *); /* the envp array */
-
+ stack_len += FLAT_DATA_ALIGN - 1; /* reserve for upcoming alignment */
res = load_flat_file(bprm, &libinfo, 0, &stack_len);
if (res > (unsigned long)-4096)
diff --git a/fs/cachefiles/internal.h b/fs/cachefiles/internal.h
index 19218e1..f7c255f 100644
--- a/fs/cachefiles/internal.h
+++ b/fs/cachefiles/internal.h
@@ -122,13 +122,13 @@
}
/*
- * cf-bind.c
+ * bind.c
*/
extern int cachefiles_daemon_bind(struct cachefiles_cache *cache, char *args);
extern void cachefiles_daemon_unbind(struct cachefiles_cache *cache);
/*
- * cf-daemon.c
+ * daemon.c
*/
extern const struct file_operations cachefiles_daemon_fops;
@@ -136,17 +136,17 @@
unsigned fnr, unsigned bnr);
/*
- * cf-interface.c
+ * interface.c
*/
extern const struct fscache_cache_ops cachefiles_cache_ops;
/*
- * cf-key.c
+ * key.c
*/
extern char *cachefiles_cook_key(const u8 *raw, int keylen, uint8_t type);
/*
- * cf-namei.c
+ * namei.c
*/
extern int cachefiles_delete_object(struct cachefiles_cache *cache,
struct cachefiles_object *object);
@@ -165,7 +165,7 @@
struct dentry *dir, char *filename);
/*
- * cf-proc.c
+ * proc.c
*/
#ifdef CONFIG_CACHEFILES_HISTOGRAM
extern atomic_t cachefiles_lookup_histogram[HZ];
@@ -190,7 +190,7 @@
#endif
/*
- * cf-rdwr.c
+ * rdwr.c
*/
extern int cachefiles_read_or_alloc_page(struct fscache_retrieval *,
struct page *, gfp_t);
@@ -205,7 +205,7 @@
extern void cachefiles_uncache_page(struct fscache_object *, struct page *);
/*
- * cf-security.c
+ * security.c
*/
extern int cachefiles_get_security_ID(struct cachefiles_cache *cache);
extern int cachefiles_determine_cache_security(struct cachefiles_cache *cache,
@@ -225,7 +225,7 @@
}
/*
- * cf-xattr.c
+ * xattr.c
*/
extern int cachefiles_check_object_type(struct cachefiles_object *object);
extern int cachefiles_set_object_xattr(struct cachefiles_object *object,
diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h
index e0cbd16..1c34130 100644
--- a/fs/fscache/internal.h
+++ b/fs/fscache/internal.h
@@ -28,7 +28,7 @@
#define FSCACHE_MAX_THREADS 32
/*
- * fsc-cache.c
+ * cache.c
*/
extern struct list_head fscache_cache_list;
extern struct rw_semaphore fscache_addremove_sem;
@@ -37,7 +37,7 @@
struct fscache_cookie *);
/*
- * fsc-cookie.c
+ * cookie.c
*/
extern struct kmem_cache *fscache_cookie_jar;
@@ -45,13 +45,13 @@
extern void __fscache_cookie_put(struct fscache_cookie *);
/*
- * fsc-fsdef.c
+ * fsdef.c
*/
extern struct fscache_cookie fscache_fsdef_index;
extern struct fscache_cookie_def fscache_fsdef_netfs_def;
/*
- * fsc-histogram.c
+ * histogram.c
*/
#ifdef CONFIG_FSCACHE_HISTOGRAM
extern atomic_t fscache_obj_instantiate_histogram[HZ];
@@ -75,7 +75,7 @@
#endif
/*
- * fsc-main.c
+ * main.c
*/
extern unsigned fscache_defer_lookup;
extern unsigned fscache_defer_create;
@@ -86,14 +86,14 @@
extern int fscache_wait_bit_interruptible(void *);
/*
- * fsc-object.c
+ * object.c
*/
extern void fscache_withdrawing_object(struct fscache_cache *,
struct fscache_object *);
extern void fscache_enqueue_object(struct fscache_object *);
/*
- * fsc-operation.c
+ * operation.c
*/
extern int fscache_submit_exclusive_op(struct fscache_object *,
struct fscache_operation *);
@@ -104,7 +104,7 @@
extern void fscache_operation_gc(struct work_struct *);
/*
- * fsc-proc.c
+ * proc.c
*/
#ifdef CONFIG_PROC_FS
extern int __init fscache_proc_init(void);
@@ -115,7 +115,7 @@
#endif
/*
- * fsc-stats.c
+ * stats.c
*/
#ifdef CONFIG_FSCACHE_STATS
extern atomic_t fscache_n_ops_processed[FSCACHE_MAX_THREADS];
diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c
index c32b4a1..a024474 100644
--- a/fs/jffs2/erase.c
+++ b/fs/jffs2/erase.c
@@ -480,13 +480,6 @@
return;
filebad:
- mutex_lock(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- /* Stick it on a list (any list) so erase_failed can take it
- right off again. Silly, but shouldn't happen often. */
- list_move(&jeb->list, &c->erasing_list);
- spin_unlock(&c->erase_completion_lock);
- mutex_unlock(&c->erase_free_sem);
jffs2_erase_failed(c, jeb, bad_offset);
return;
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 6c68ffd..b660435 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -1015,6 +1015,7 @@
host_err = vfs_writev(file, (struct iovec __user *)vec, vlen, &offset);
set_fs(oldfs);
if (host_err >= 0) {
+ *cnt = host_err;
nfsdstats.io_write += host_err;
fsnotify_modify(file->f_path.dentry);
}
@@ -1060,10 +1061,9 @@
}
dprintk("nfsd: write complete host_err=%d\n", host_err);
- if (host_err >= 0) {
+ if (host_err >= 0)
err = 0;
- *cnt = host_err;
- } else
+ else
err = nfserrno(host_err);
out:
return err;
diff --git a/fs/proc/base.c b/fs/proc/base.c
index fb45615..3326bbf 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1956,7 +1956,7 @@
const struct pid_entry *p = ptr;
struct inode *inode;
struct proc_inode *ei;
- struct dentry *error = ERR_PTR(-EINVAL);
+ struct dentry *error = ERR_PTR(-ENOENT);
inode = proc_pid_make_inode(dir->i_sb, task);
if (!inode)
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index b1606e0..561a9c0 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -723,7 +723,7 @@
mutex_unlock(&sysfs_workq_mutex);
if (sysfs_workqueue == NULL) {
- sysfs_workqueue = create_workqueue("sysfsd");
+ sysfs_workqueue = create_singlethread_workqueue("sysfsd");
if (sysfs_workqueue == NULL) {
module_put(owner);
return -ENOMEM;
diff --git a/include/linux/cred.h b/include/linux/cred.h
index 3282ee4..4fa9996 100644
--- a/include/linux/cred.h
+++ b/include/linux/cred.h
@@ -13,6 +13,7 @@
#define _LINUX_CRED_H
#include <linux/capability.h>
+#include <linux/init.h>
#include <linux/key.h>
#include <asm/atomic.h>
diff --git a/include/linux/i7300_idle.h b/include/linux/i7300_idle.h
index 05a80c4..1587b7d 100644
--- a/include/linux/i7300_idle.h
+++ b/include/linux/i7300_idle.h
@@ -16,35 +16,33 @@
struct fbd_ioat {
unsigned int vendor;
unsigned int ioat_dev;
+ unsigned int enabled;
};
/*
* The i5000 chip-set has the same hooks as the i7300
- * but support is disabled by default because this driver
- * has not been validated on that platform.
+ * but it is not enabled by default and must be manually
+ * manually enabled with "forceload=1" because it is
+ * only lightly validated.
*/
-#define SUPPORT_I5000 0
static const struct fbd_ioat fbd_ioat_list[] = {
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB},
-#if SUPPORT_I5000
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT},
-#endif
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB, 1},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT, 0},
{0, 0}
};
/* table of devices that work with this driver */
static const struct pci_device_id pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FBD_CNB) },
-#if SUPPORT_I5000
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
-#endif
{ } /* Terminating entry */
};
/* Check for known platforms with I/O-AT */
static inline int i7300_idle_platform_probe(struct pci_dev **fbd_dev,
- struct pci_dev **ioat_dev)
+ struct pci_dev **ioat_dev,
+ int enable_all)
{
int i;
struct pci_dev *memdev, *dmadev;
@@ -69,6 +67,8 @@
for (i = 0; fbd_ioat_list[i].vendor != 0; i++) {
if (dmadev->vendor == fbd_ioat_list[i].vendor &&
dmadev->device == fbd_ioat_list[i].ioat_dev) {
+ if (!(fbd_ioat_list[i].enabled || enable_all))
+ continue;
if (fbd_dev)
*fbd_dev = memdev;
if (ioat_dev)
diff --git a/include/linux/input.h b/include/linux/input.h
index 0e6ff5d..6fed4f6 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -656,6 +656,7 @@
#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */
#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
+#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
#define ABS_MAX 0x3f
#define ABS_CNT (ABS_MAX+1)
diff --git a/include/linux/swap.h b/include/linux/swap.h
index 62d8143..d476aad 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -437,6 +437,11 @@
return 0;
}
+static inline void
+mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent)
+{
+}
+
#endif /* CONFIG_SWAP */
#endif /* __KERNEL__*/
#endif /* _LINUX_SWAP_H */
diff --git a/mm/filemap.c b/mm/filemap.c
index 379ff0bc..1b60f30 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -121,7 +121,6 @@
mapping->nrpages--;
__dec_zone_page_state(page, NR_FILE_PAGES);
BUG_ON(page_mapped(page));
- mem_cgroup_uncharge_cache_page(page);
/*
* Some filesystems seem to re-dirty the page even after
@@ -145,6 +144,7 @@
spin_lock_irq(&mapping->tree_lock);
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
+ mem_cgroup_uncharge_cache_page(page);
}
static int sync_page(void *word)
@@ -476,13 +476,13 @@
if (likely(!error)) {
mapping->nrpages++;
__inc_zone_page_state(page, NR_FILE_PAGES);
+ spin_unlock_irq(&mapping->tree_lock);
} else {
page->mapping = NULL;
+ spin_unlock_irq(&mapping->tree_lock);
mem_cgroup_uncharge_cache_page(page);
page_cache_release(page);
}
-
- spin_unlock_irq(&mapping->tree_lock);
radix_tree_preload_end();
} else
mem_cgroup_uncharge_cache_page(page);
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 28c655b..e83ad2c 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -316,7 +316,7 @@
static struct resv_map *vma_resv_map(struct vm_area_struct *vma)
{
VM_BUG_ON(!is_vm_hugetlb_page(vma));
- if (!(vma->vm_flags & VM_SHARED))
+ if (!(vma->vm_flags & VM_MAYSHARE))
return (struct resv_map *)(get_vma_private_data(vma) &
~HPAGE_RESV_MASK);
return NULL;
@@ -325,7 +325,7 @@
static void set_vma_resv_map(struct vm_area_struct *vma, struct resv_map *map)
{
VM_BUG_ON(!is_vm_hugetlb_page(vma));
- VM_BUG_ON(vma->vm_flags & VM_SHARED);
+ VM_BUG_ON(vma->vm_flags & VM_MAYSHARE);
set_vma_private_data(vma, (get_vma_private_data(vma) &
HPAGE_RESV_MASK) | (unsigned long)map);
@@ -334,7 +334,7 @@
static void set_vma_resv_flags(struct vm_area_struct *vma, unsigned long flags)
{
VM_BUG_ON(!is_vm_hugetlb_page(vma));
- VM_BUG_ON(vma->vm_flags & VM_SHARED);
+ VM_BUG_ON(vma->vm_flags & VM_MAYSHARE);
set_vma_private_data(vma, get_vma_private_data(vma) | flags);
}
@@ -353,7 +353,7 @@
if (vma->vm_flags & VM_NORESERVE)
return;
- if (vma->vm_flags & VM_SHARED) {
+ if (vma->vm_flags & VM_MAYSHARE) {
/* Shared mappings always use reserves */
h->resv_huge_pages--;
} else if (is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
@@ -369,14 +369,14 @@
void reset_vma_resv_huge_pages(struct vm_area_struct *vma)
{
VM_BUG_ON(!is_vm_hugetlb_page(vma));
- if (!(vma->vm_flags & VM_SHARED))
+ if (!(vma->vm_flags & VM_MAYSHARE))
vma->vm_private_data = (void *)0;
}
/* Returns true if the VMA has associated reserve pages */
static int vma_has_reserves(struct vm_area_struct *vma)
{
- if (vma->vm_flags & VM_SHARED)
+ if (vma->vm_flags & VM_MAYSHARE)
return 1;
if (is_vma_resv_set(vma, HPAGE_RESV_OWNER))
return 1;
@@ -924,7 +924,7 @@
struct address_space *mapping = vma->vm_file->f_mapping;
struct inode *inode = mapping->host;
- if (vma->vm_flags & VM_SHARED) {
+ if (vma->vm_flags & VM_MAYSHARE) {
pgoff_t idx = vma_hugecache_offset(h, vma, addr);
return region_chg(&inode->i_mapping->private_list,
idx, idx + 1);
@@ -949,7 +949,7 @@
struct address_space *mapping = vma->vm_file->f_mapping;
struct inode *inode = mapping->host;
- if (vma->vm_flags & VM_SHARED) {
+ if (vma->vm_flags & VM_MAYSHARE) {
pgoff_t idx = vma_hugecache_offset(h, vma, addr);
region_add(&inode->i_mapping->private_list, idx, idx + 1);
@@ -1893,7 +1893,7 @@
* at the time of fork() could consume its reserves on COW instead
* of the full address range.
*/
- if (!(vma->vm_flags & VM_SHARED) &&
+ if (!(vma->vm_flags & VM_MAYSHARE) &&
is_vma_resv_set(vma, HPAGE_RESV_OWNER) &&
old_page != pagecache_page)
outside_reserve = 1;
@@ -2000,7 +2000,7 @@
clear_huge_page(page, address, huge_page_size(h));
__SetPageUptodate(page);
- if (vma->vm_flags & VM_SHARED) {
+ if (vma->vm_flags & VM_MAYSHARE) {
int err;
struct inode *inode = mapping->host;
@@ -2104,7 +2104,7 @@
goto out_mutex;
}
- if (!(vma->vm_flags & VM_SHARED))
+ if (!(vma->vm_flags & VM_MAYSHARE))
pagecache_page = hugetlbfs_pagecache_page(h,
vma, address);
}
@@ -2289,7 +2289,7 @@
* to reserve the full area even if read-only as mprotect() may be
* called to make the mapping read-write. Assume !vma is a shm mapping
*/
- if (!vma || vma->vm_flags & VM_SHARED)
+ if (!vma || vma->vm_flags & VM_MAYSHARE)
chg = region_chg(&inode->i_mapping->private_list, from, to);
else {
struct resv_map *resv_map = resv_map_alloc();
@@ -2330,7 +2330,7 @@
* consumed reservations are stored in the map. Hence, nothing
* else has to be done for private mappings here
*/
- if (!vma || vma->vm_flags & VM_SHARED)
+ if (!vma || vma->vm_flags & VM_MAYSHARE)
region_add(&inode->i_mapping->private_list, from, to);
return 0;
}
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 01c2d8f..78eb855 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -314,14 +314,6 @@
return mem;
}
-static bool mem_cgroup_is_obsolete(struct mem_cgroup *mem)
-{
- if (!mem)
- return true;
- return css_is_removed(&mem->css);
-}
-
-
/*
* Call callback function against all cgroup under hierarchy tree.
*/
@@ -932,7 +924,7 @@
if (unlikely(!mem))
return 0;
- VM_BUG_ON(!mem || mem_cgroup_is_obsolete(mem));
+ VM_BUG_ON(css_is_removed(&mem->css));
while (1) {
int ret;
@@ -1488,8 +1480,9 @@
__mem_cgroup_uncharge_common(page, MEM_CGROUP_CHARGE_TYPE_CACHE);
}
+#ifdef CONFIG_SWAP
/*
- * called from __delete_from_swap_cache() and drop "page" account.
+ * called after __delete_from_swap_cache() and drop "page" account.
* memcg information is recorded to swap_cgroup of "ent"
*/
void mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent)
@@ -1506,6 +1499,7 @@
if (memcg)
css_put(&memcg->css);
}
+#endif
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
/*
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 92bcf1d..a7b2460 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -284,22 +284,28 @@
printk(KERN_INFO "[ pid ] uid tgid total_vm rss cpu oom_adj "
"name\n");
do_each_thread(g, p) {
- /*
- * total_vm and rss sizes do not exist for tasks with a
- * detached mm so there's no need to report them.
- */
- if (!p->mm)
- continue;
+ struct mm_struct *mm;
+
if (mem && !task_in_mem_cgroup(p, mem))
continue;
if (!thread_group_leader(p))
continue;
task_lock(p);
+ mm = p->mm;
+ if (!mm) {
+ /*
+ * total_vm and rss sizes do not exist for tasks with no
+ * mm so there's no need to report them; they can't be
+ * oom killed anyway.
+ */
+ task_unlock(p);
+ continue;
+ }
printk(KERN_INFO "[%5d] %5d %5d %8lu %8lu %3d %3d %s\n",
- p->pid, __task_cred(p)->uid, p->tgid,
- p->mm->total_vm, get_mm_rss(p->mm), (int)task_cpu(p),
- p->oomkilladj, p->comm);
+ p->pid, __task_cred(p)->uid, p->tgid, mm->total_vm,
+ get_mm_rss(mm), (int)task_cpu(p), p->oomkilladj,
+ p->comm);
task_unlock(p);
} while_each_thread(g, p);
}
diff --git a/mm/swap_state.c b/mm/swap_state.c
index 3ecea98..1416e7e 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -109,8 +109,6 @@
*/
void __delete_from_swap_cache(struct page *page)
{
- swp_entry_t ent = {.val = page_private(page)};
-
VM_BUG_ON(!PageLocked(page));
VM_BUG_ON(!PageSwapCache(page));
VM_BUG_ON(PageWriteback(page));
@@ -121,7 +119,6 @@
total_swapcache_pages--;
__dec_zone_page_state(page, NR_FILE_PAGES);
INC_CACHE_INFO(del_total);
- mem_cgroup_uncharge_swapcache(page, ent);
}
/**
@@ -191,6 +188,7 @@
__delete_from_swap_cache(page);
spin_unlock_irq(&swapper_space.tree_lock);
+ mem_cgroup_uncharge_swapcache(page, entry);
swap_free(entry);
page_cache_release(page);
}
diff --git a/mm/truncate.c b/mm/truncate.c
index 55206fa..12e1579 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -359,6 +359,7 @@
BUG_ON(page_has_private(page));
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
+ mem_cgroup_uncharge_cache_page(page);
page_cache_release(page); /* pagecache ref */
return 1;
failed:
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 5fa3eda..d254306 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -470,10 +470,12 @@
swp_entry_t swap = { .val = page_private(page) };
__delete_from_swap_cache(page);
spin_unlock_irq(&mapping->tree_lock);
+ mem_cgroup_uncharge_swapcache(page, swap);
swap_free(swap);
} else {
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
+ mem_cgroup_uncharge_cache_page(page);
}
return 1;
diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
index af31988..9d50423 100644
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -345,6 +345,7 @@
lock_sock(sock->sk);
sock->sk->sk_sndbuf = snd * 2;
sock->sk->sk_rcvbuf = rcv * 2;
+ sock->sk->sk_userlocks |= SOCK_SNDBUF_LOCK|SOCK_RCVBUF_LOCK;
release_sock(sock->sk);
#endif
}
@@ -796,6 +797,23 @@
test_bit(XPT_CONN, &svsk->sk_xprt.xpt_flags),
test_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags));
+ if (test_and_clear_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags))
+ /* sndbuf needs to have room for one request
+ * per thread, otherwise we can stall even when the
+ * network isn't a bottleneck.
+ *
+ * We count all threads rather than threads in a
+ * particular pool, which provides an upper bound
+ * on the number of threads which will access the socket.
+ *
+ * rcvbuf just needs to be able to hold a few requests.
+ * Normally they will be removed from the queue
+ * as soon a a complete request arrives.
+ */
+ svc_sock_setbufsize(svsk->sk_sock,
+ (serv->sv_nrthreads+3) * serv->sv_max_mesg,
+ 3 * serv->sv_max_mesg);
+
clear_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
/* Receive data. If we haven't got the record length yet, get
@@ -1043,6 +1061,15 @@
tcp_sk(sk)->nonagle |= TCP_NAGLE_OFF;
+ /* initialise setting must have enough space to
+ * receive and respond to one request.
+ * svc_tcp_recvfrom will re-adjust if necessary
+ */
+ svc_sock_setbufsize(svsk->sk_sock,
+ 3 * svsk->sk_xprt.xpt_server->sv_max_mesg,
+ 3 * svsk->sk_xprt.xpt_server->sv_max_mesg);
+
+ set_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags);
set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
if (sk->sk_state != TCP_ESTABLISHED)
set_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags);
@@ -1112,14 +1139,8 @@
/* Initialize the socket */
if (sock->type == SOCK_DGRAM)
svc_udp_init(svsk, serv);
- else {
- /* initialise setting must have enough space to
- * receive and respond to one request.
- */
- svc_sock_setbufsize(svsk->sk_sock, 4 * serv->sv_max_mesg,
- 4 * serv->sv_max_mesg);
+ else
svc_tcp_init(svsk, serv);
- }
dprintk("svc: svc_setup_socket created %p (inet %p)\n",
svsk, svsk->sk_sk);
diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
index 8b510c5..f11be72 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
@@ -128,7 +128,8 @@
page_bytes -= sge_bytes;
frmr->page_list->page_list[page_no] =
- ib_dma_map_page(xprt->sc_cm_id->device, page, 0,
+ ib_dma_map_single(xprt->sc_cm_id->device,
+ page_address(page),
PAGE_SIZE, DMA_TO_DEVICE);
if (ib_dma_mapping_error(xprt->sc_cm_id->device,
frmr->page_list->page_list[page_no]))
@@ -532,18 +533,17 @@
clear_bit(RDMACTXT_F_FAST_UNREG, &ctxt->flags);
/* Prepare the SGE for the RPCRDMA Header */
+ ctxt->sge[0].lkey = rdma->sc_dma_lkey;
+ ctxt->sge[0].length = svc_rdma_xdr_get_reply_hdr_len(rdma_resp);
ctxt->sge[0].addr =
- ib_dma_map_page(rdma->sc_cm_id->device,
- page, 0, PAGE_SIZE, DMA_TO_DEVICE);
+ ib_dma_map_single(rdma->sc_cm_id->device, page_address(page),
+ ctxt->sge[0].length, DMA_TO_DEVICE);
if (ib_dma_mapping_error(rdma->sc_cm_id->device, ctxt->sge[0].addr))
goto err;
atomic_inc(&rdma->sc_dma_used);
ctxt->direction = DMA_TO_DEVICE;
- ctxt->sge[0].length = svc_rdma_xdr_get_reply_hdr_len(rdma_resp);
- ctxt->sge[0].lkey = rdma->sc_dma_lkey;
-
/* Determine how many of our SGE are to be transmitted */
for (sge_no = 1; byte_count && sge_no < vec->count; sge_no++) {
sge_bytes = min_t(size_t, vec->sge[sge_no].iov_len, byte_count);
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index 4b0c2fa..5151f9f 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -500,8 +500,8 @@
BUG_ON(sge_no >= xprt->sc_max_sge);
page = svc_rdma_get_page();
ctxt->pages[sge_no] = page;
- pa = ib_dma_map_page(xprt->sc_cm_id->device,
- page, 0, PAGE_SIZE,
+ pa = ib_dma_map_single(xprt->sc_cm_id->device,
+ page_address(page), PAGE_SIZE,
DMA_FROM_DEVICE);
if (ib_dma_mapping_error(xprt->sc_cm_id->device, pa))
goto err_put_ctxt;
@@ -1315,8 +1315,8 @@
length = svc_rdma_xdr_encode_error(xprt, rmsgp, err, va);
/* Prepare SGE for local address */
- sge.addr = ib_dma_map_page(xprt->sc_cm_id->device,
- p, 0, PAGE_SIZE, DMA_FROM_DEVICE);
+ sge.addr = ib_dma_map_single(xprt->sc_cm_id->device,
+ page_address(p), PAGE_SIZE, DMA_FROM_DEVICE);
if (ib_dma_mapping_error(xprt->sc_cm_id->device, sge.addr)) {
put_page(p);
return;
@@ -1343,7 +1343,7 @@
if (ret) {
dprintk("svcrdma: Error %d posting send for protocol error\n",
ret);
- ib_dma_unmap_page(xprt->sc_cm_id->device,
+ ib_dma_unmap_single(xprt->sc_cm_id->device,
sge.addr, PAGE_SIZE,
DMA_FROM_DEVICE);
svc_rdma_put_context(ctxt, 1);
diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c
index 5b48191..e42be5c 100644
--- a/security/tomoyo/tomoyo.c
+++ b/security/tomoyo/tomoyo.c
@@ -27,6 +27,12 @@
static int tomoyo_bprm_set_creds(struct linux_binprm *bprm)
{
+ int rc;
+
+ rc = cap_bprm_set_creds(bprm);
+ if (rc)
+ return rc;
+
/*
* Do only if this function is called for the first time of an execve
* operation.
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index a2a792c..d659995 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -249,6 +249,11 @@
new_hw_ptr = hw_base + pos;
}
}
+
+ /* Do jiffies check only in xrun_debug mode */
+ if (!xrun_debug(substream))
+ goto no_jiffies_check;
+
/* Skip the jiffies check for hardwares with BATCH flag.
* Such hardware usually just increases the position at each IRQ,
* thus it can't give any strange position.
@@ -336,7 +341,9 @@
hw_base = 0;
new_hw_ptr = hw_base + pos;
}
- if (((delta * HZ) / runtime->rate) > jdelta + HZ/100) {
+ /* Do jiffies check only in xrun_debug mode */
+ if (xrun_debug(substream) &&
+ ((delta * HZ) / runtime->rate) > jdelta + HZ/100) {
hw_ptr_error(substream,
"hw_ptr skipping! "
"(pos=%ld, delta=%ld, period=%ld, jdelta=%lu/%lu)\n",
@@ -1478,7 +1485,6 @@
runtime->status->hw_ptr %= runtime->buffer_size;
else
runtime->status->hw_ptr = 0;
- runtime->hw_ptr_jiffies = jiffies;
snd_pcm_stream_unlock_irqrestore(substream, flags);
return 0;
}
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index fc6f98e..b5da656 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -848,6 +848,7 @@
{
struct snd_pcm_runtime *runtime = substream->runtime;
snd_pcm_trigger_tstamp(substream);
+ runtime->hw_ptr_jiffies = jiffies;
runtime->status->state = state;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
runtime->silence_size > 0)
@@ -961,6 +962,11 @@
{
if (substream->runtime->trigger_master != substream)
return 0;
+ /* The jiffies check in snd_pcm_update_hw_ptr*() is done by
+ * a delta betwen the current jiffies, this gives a large enough
+ * delta, effectively to skip the check once.
+ */
+ substream->runtime->hw_ptr_jiffies = jiffies - HZ * 1000;
return substream->ops->trigger(substream,
push ? SNDRV_PCM_TRIGGER_PAUSE_PUSH :
SNDRV_PCM_TRIGGER_PAUSE_RELEASE);
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 56ce19e..4fcbe21 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -1848,6 +1848,7 @@
static struct snd_pci_quirk cxt5051_cfg_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x30cf, "HP DV6736", CXT5051_HP_DV6736),
+ SND_PCI_QUIRK(0x103c, 0x360b, "Compaq Presario CQ60", CXT5051_HP),
SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board",
CXT5051_LAPTOP),
SND_PCI_QUIRK(0x14f1, 0x5051, "HP Spartan 1.1", CXT5051_HP),
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index 823296d..a6b8848 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -3347,7 +3347,7 @@
[QUIRK_MIDI_YAMAHA] = snd_usb_create_midi_interface,
[QUIRK_MIDI_MIDIMAN] = snd_usb_create_midi_interface,
[QUIRK_MIDI_NOVATION] = snd_usb_create_midi_interface,
- [QUIRK_MIDI_RAW] = snd_usb_create_midi_interface,
+ [QUIRK_MIDI_FASTLANE] = snd_usb_create_midi_interface,
[QUIRK_MIDI_EMAGIC] = snd_usb_create_midi_interface,
[QUIRK_MIDI_CME] = snd_usb_create_midi_interface,
[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 36e4f7a..8e7f789 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -153,7 +153,7 @@
QUIRK_MIDI_YAMAHA,
QUIRK_MIDI_MIDIMAN,
QUIRK_MIDI_NOVATION,
- QUIRK_MIDI_RAW,
+ QUIRK_MIDI_FASTLANE,
QUIRK_MIDI_EMAGIC,
QUIRK_MIDI_CME,
QUIRK_MIDI_US122L,
diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c
index 26bad37..2fb35cc 100644
--- a/sound/usb/usbmidi.c
+++ b/sound/usb/usbmidi.c
@@ -1778,8 +1778,18 @@
umidi->usb_protocol_ops = &snd_usbmidi_novation_ops;
err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
break;
- case QUIRK_MIDI_RAW:
+ case QUIRK_MIDI_FASTLANE:
umidi->usb_protocol_ops = &snd_usbmidi_raw_ops;
+ /*
+ * Interface 1 contains isochronous endpoints, but with the same
+ * numbers as in interface 0. Since it is interface 1 that the
+ * USB core has most recently seen, these descriptors are now
+ * associated with the endpoint numbers. This will foul up our
+ * attempts to submit bulk/interrupt URBs to the endpoints in
+ * interface 0, so we have to make sure that the USB core looks
+ * again at interface 0 by calling usb_set_interface() on it.
+ */
+ usb_set_interface(umidi->chip->dev, 0, 0);
err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
break;
case QUIRK_MIDI_EMAGIC:
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index 647ef50..5d955aa 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -1868,7 +1868,7 @@
.data = & (const struct snd_usb_audio_quirk[]) {
{
.ifnum = 0,
- .type = QUIRK_MIDI_RAW
+ .type = QUIRK_MIDI_FASTLANE
},
{
.ifnum = 1,