| /* |
| * Stuff used by all variants of the driver |
| * |
| * Copyright (c) 2001 by Stefan Eilers, |
| * Hansjoerg Lipp <hjlipp@web.de>, |
| * Tilman Schmidt <tilman@imap.cc>. |
| * |
| * ===================================================================== |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * ===================================================================== |
| */ |
| |
| #include "gigaset.h" |
| |
| /* == Handling of I4L IO =====================================================*/ |
| |
| /* writebuf_from_LL |
| * called by LL to transmit data on an open channel |
| * inserts the buffer data into the send queue and starts the transmission |
| * Note that this operation must not sleep! |
| * When the buffer is processed completely, gigaset_skb_sent() should be called. |
| * parameters: |
| * driverID driver ID as assigned by LL |
| * channel channel number |
| * ack if != 0 LL wants to be notified on completion via |
| * statcallb(ISDN_STAT_BSENT) |
| * skb skb containing data to send |
| * return value: |
| * number of accepted bytes |
| * 0 if temporarily unable to accept data (out of buffer space) |
| * <0 on error (eg. -EINVAL) |
| */ |
| static int writebuf_from_LL(int driverID, int channel, int ack, |
| struct sk_buff *skb) |
| { |
| struct cardstate *cs; |
| struct bc_state *bcs; |
| unsigned len; |
| unsigned skblen; |
| |
| if (!(cs = gigaset_get_cs_by_id(driverID))) { |
| pr_err("%s: invalid driver ID (%d)\n", __func__, driverID); |
| return -ENODEV; |
| } |
| if (channel < 0 || channel >= cs->channels) { |
| dev_err(cs->dev, "%s: invalid channel ID (%d)\n", |
| __func__, channel); |
| return -ENODEV; |
| } |
| bcs = &cs->bcs[channel]; |
| len = skb->len; |
| |
| gig_dbg(DEBUG_LLDATA, |
| "Receiving data from LL (id: %d, ch: %d, ack: %d, sz: %d)", |
| driverID, channel, ack, len); |
| |
| if (!len) { |
| if (ack) |
| dev_notice(cs->dev, "%s: not ACKing empty packet\n", |
| __func__); |
| return 0; |
| } |
| if (len > MAX_BUF_SIZE) { |
| dev_err(cs->dev, "%s: packet too large (%d bytes)\n", |
| __func__, len); |
| return -EINVAL; |
| } |
| |
| skblen = ack ? len : 0; |
| skb->head[0] = skblen & 0xff; |
| skb->head[1] = skblen >> 8; |
| gig_dbg(DEBUG_MCMD, "skb: len=%u, skblen=%u: %02x %02x", |
| len, skblen, (unsigned) skb->head[0], (unsigned) skb->head[1]); |
| |
| /* pass to device-specific module */ |
| return cs->ops->send_skb(bcs, skb); |
| } |
| |
| void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb) |
| { |
| unsigned len; |
| isdn_ctrl response; |
| |
| ++bcs->trans_up; |
| |
| if (skb->len) |
| dev_warn(bcs->cs->dev, "%s: skb->len==%d\n", |
| __func__, skb->len); |
| |
| len = (unsigned char) skb->head[0] | |
| (unsigned) (unsigned char) skb->head[1] << 8; |
| if (len) { |
| gig_dbg(DEBUG_MCMD, "ACKing to LL (id: %d, ch: %d, sz: %u)", |
| bcs->cs->myid, bcs->channel, len); |
| |
| response.driver = bcs->cs->myid; |
| response.command = ISDN_STAT_BSENT; |
| response.arg = bcs->channel; |
| response.parm.length = len; |
| bcs->cs->iif.statcallb(&response); |
| } |
| } |
| EXPORT_SYMBOL_GPL(gigaset_skb_sent); |
| |
| /* This function will be called by LL to send commands |
| * NOTE: LL ignores the returned value, for commands other than ISDN_CMD_IOCTL, |
| * so don't put too much effort into it. |
| */ |
| static int command_from_LL(isdn_ctrl *cntrl) |
| { |
| struct cardstate *cs = gigaset_get_cs_by_id(cntrl->driver); |
| struct bc_state *bcs; |
| int retval = 0; |
| struct setup_parm *sp; |
| |
| gigaset_debugdrivers(); |
| |
| if (!cs) { |
| pr_err("%s: invalid driver ID (%d)\n", __func__, cntrl->driver); |
| return -ENODEV; |
| } |
| |
| switch (cntrl->command) { |
| case ISDN_CMD_IOCTL: |
| gig_dbg(DEBUG_ANY, "ISDN_CMD_IOCTL (driver: %d, arg: %ld)", |
| cntrl->driver, cntrl->arg); |
| |
| dev_warn(cs->dev, "ISDN_CMD_IOCTL not supported\n"); |
| return -EINVAL; |
| |
| case ISDN_CMD_DIAL: |
| gig_dbg(DEBUG_ANY, |
| "ISDN_CMD_DIAL (driver: %d, ch: %ld, " |
| "phone: %s, ownmsn: %s, si1: %d, si2: %d)", |
| cntrl->driver, cntrl->arg, |
| cntrl->parm.setup.phone, cntrl->parm.setup.eazmsn, |
| cntrl->parm.setup.si1, cntrl->parm.setup.si2); |
| |
| if (cntrl->arg >= cs->channels) { |
| dev_err(cs->dev, |
| "ISDN_CMD_DIAL: invalid channel (%d)\n", |
| (int) cntrl->arg); |
| return -EINVAL; |
| } |
| |
| bcs = cs->bcs + cntrl->arg; |
| |
| if (!gigaset_get_channel(bcs)) { |
| dev_err(cs->dev, "ISDN_CMD_DIAL: channel not free\n"); |
| return -EBUSY; |
| } |
| |
| sp = kmalloc(sizeof *sp, GFP_ATOMIC); |
| if (!sp) { |
| gigaset_free_channel(bcs); |
| dev_err(cs->dev, "ISDN_CMD_DIAL: out of memory\n"); |
| return -ENOMEM; |
| } |
| *sp = cntrl->parm.setup; |
| |
| if (!gigaset_add_event(cs, &bcs->at_state, EV_DIAL, sp, |
| bcs->at_state.seq_index, NULL)) { |
| //FIXME what should we do? |
| kfree(sp); |
| gigaset_free_channel(bcs); |
| return -ENOMEM; |
| } |
| |
| gig_dbg(DEBUG_CMD, "scheduling DIAL"); |
| gigaset_schedule_event(cs); |
| break; |
| case ISDN_CMD_ACCEPTD: //FIXME |
| gig_dbg(DEBUG_ANY, "ISDN_CMD_ACCEPTD"); |
| |
| if (cntrl->arg >= cs->channels) { |
| dev_err(cs->dev, |
| "ISDN_CMD_ACCEPTD: invalid channel (%d)\n", |
| (int) cntrl->arg); |
| return -EINVAL; |
| } |
| |
| if (!gigaset_add_event(cs, &cs->bcs[cntrl->arg].at_state, |
| EV_ACCEPT, NULL, 0, NULL)) { |
| //FIXME what should we do? |
| return -ENOMEM; |
| } |
| |
| gig_dbg(DEBUG_CMD, "scheduling ACCEPT"); |
| gigaset_schedule_event(cs); |
| |
| break; |
| case ISDN_CMD_ACCEPTB: |
| gig_dbg(DEBUG_ANY, "ISDN_CMD_ACCEPTB"); |
| break; |
| case ISDN_CMD_HANGUP: |
| gig_dbg(DEBUG_ANY, "ISDN_CMD_HANGUP (ch: %d)", |
| (int) cntrl->arg); |
| |
| if (cntrl->arg >= cs->channels) { |
| dev_err(cs->dev, |
| "ISDN_CMD_HANGUP: invalid channel (%d)\n", |
| (int) cntrl->arg); |
| return -EINVAL; |
| } |
| |
| if (!gigaset_add_event(cs, &cs->bcs[cntrl->arg].at_state, |
| EV_HUP, NULL, 0, NULL)) { |
| //FIXME what should we do? |
| return -ENOMEM; |
| } |
| |
| gig_dbg(DEBUG_CMD, "scheduling HUP"); |
| gigaset_schedule_event(cs); |
| |
| break; |
| case ISDN_CMD_CLREAZ: /* Do not signal incoming signals */ //FIXME |
| gig_dbg(DEBUG_ANY, "ISDN_CMD_CLREAZ"); |
| break; |
| case ISDN_CMD_SETEAZ: /* Signal incoming calls for given MSN */ //FIXME |
| gig_dbg(DEBUG_ANY, |
| "ISDN_CMD_SETEAZ (id: %d, ch: %ld, number: %s)", |
| cntrl->driver, cntrl->arg, cntrl->parm.num); |
| break; |
| case ISDN_CMD_SETL2: /* Set L2 to given protocol */ |
| gig_dbg(DEBUG_ANY, "ISDN_CMD_SETL2 (ch: %ld, proto: %lx)", |
| cntrl->arg & 0xff, (cntrl->arg >> 8)); |
| |
| if ((cntrl->arg & 0xff) >= cs->channels) { |
| dev_err(cs->dev, |
| "ISDN_CMD_SETL2: invalid channel (%d)\n", |
| (int) cntrl->arg & 0xff); |
| return -EINVAL; |
| } |
| |
| if (!gigaset_add_event(cs, &cs->bcs[cntrl->arg & 0xff].at_state, |
| EV_PROTO_L2, NULL, cntrl->arg >> 8, |
| NULL)) { |
| //FIXME what should we do? |
| return -ENOMEM; |
| } |
| |
| gig_dbg(DEBUG_CMD, "scheduling PROTO_L2"); |
| gigaset_schedule_event(cs); |
| break; |
| case ISDN_CMD_SETL3: /* Set L3 to given protocol */ |
| gig_dbg(DEBUG_ANY, "ISDN_CMD_SETL3 (ch: %ld, proto: %lx)", |
| cntrl->arg & 0xff, (cntrl->arg >> 8)); |
| |
| if ((cntrl->arg & 0xff) >= cs->channels) { |
| dev_err(cs->dev, |
| "ISDN_CMD_SETL3: invalid channel (%d)\n", |
| (int) cntrl->arg & 0xff); |
| return -EINVAL; |
| } |
| |
| if (cntrl->arg >> 8 != ISDN_PROTO_L3_TRANS) { |
| dev_err(cs->dev, |
| "ISDN_CMD_SETL3: invalid protocol %lu\n", |
| cntrl->arg >> 8); |
| return -EINVAL; |
| } |
| |
| break; |
| case ISDN_CMD_PROCEED: |
| gig_dbg(DEBUG_ANY, "ISDN_CMD_PROCEED"); //FIXME |
| break; |
| case ISDN_CMD_ALERT: |
| gig_dbg(DEBUG_ANY, "ISDN_CMD_ALERT"); //FIXME |
| if (cntrl->arg >= cs->channels) { |
| dev_err(cs->dev, |
| "ISDN_CMD_ALERT: invalid channel (%d)\n", |
| (int) cntrl->arg); |
| return -EINVAL; |
| } |
| //bcs = cs->bcs + cntrl->arg; |
| //bcs->proto2 = -1; |
| // FIXME |
| break; |
| case ISDN_CMD_REDIR: |
| gig_dbg(DEBUG_ANY, "ISDN_CMD_REDIR"); //FIXME |
| break; |
| case ISDN_CMD_PROT_IO: |
| gig_dbg(DEBUG_ANY, "ISDN_CMD_PROT_IO"); |
| break; |
| case ISDN_CMD_FAXCMD: |
| gig_dbg(DEBUG_ANY, "ISDN_CMD_FAXCMD"); |
| break; |
| case ISDN_CMD_GETL2: |
| gig_dbg(DEBUG_ANY, "ISDN_CMD_GETL2"); |
| break; |
| case ISDN_CMD_GETL3: |
| gig_dbg(DEBUG_ANY, "ISDN_CMD_GETL3"); |
| break; |
| case ISDN_CMD_GETEAZ: |
| gig_dbg(DEBUG_ANY, "ISDN_CMD_GETEAZ"); |
| break; |
| case ISDN_CMD_SETSIL: |
| gig_dbg(DEBUG_ANY, "ISDN_CMD_SETSIL"); |
| break; |
| case ISDN_CMD_GETSIL: |
| gig_dbg(DEBUG_ANY, "ISDN_CMD_GETSIL"); |
| break; |
| default: |
| dev_err(cs->dev, "unknown command %d from LL\n", |
| cntrl->command); |
| return -EINVAL; |
| } |
| |
| return retval; |
| } |
| |
| void gigaset_i4l_cmd(struct cardstate *cs, int cmd) |
| { |
| isdn_ctrl command; |
| |
| command.driver = cs->myid; |
| command.command = cmd; |
| command.arg = 0; |
| cs->iif.statcallb(&command); |
| } |
| |
| void gigaset_i4l_channel_cmd(struct bc_state *bcs, int cmd) |
| { |
| isdn_ctrl command; |
| |
| command.driver = bcs->cs->myid; |
| command.command = cmd; |
| command.arg = bcs->channel; |
| bcs->cs->iif.statcallb(&command); |
| } |
| |
| int gigaset_isdn_setup_dial(struct at_state_t *at_state, void *data) |
| { |
| struct bc_state *bcs = at_state->bcs; |
| unsigned proto; |
| const char *bc; |
| size_t length[AT_NUM]; |
| size_t l; |
| int i; |
| struct setup_parm *sp = data; |
| |
| switch (bcs->proto2) { |
| case ISDN_PROTO_L2_HDLC: |
| proto = 1; /* 0: Bitsynchron, 1: HDLC, 2: voice */ |
| break; |
| case ISDN_PROTO_L2_TRANS: |
| proto = 2; /* 0: Bitsynchron, 1: HDLC, 2: voice */ |
| break; |
| default: |
| dev_err(bcs->cs->dev, "%s: invalid L2 protocol: %u\n", |
| __func__, bcs->proto2); |
| return -EINVAL; |
| } |
| |
| switch (sp->si1) { |
| case 1: /* audio */ |
| bc = "9090A3"; /* 3.1 kHz audio, A-law */ |
| break; |
| case 7: /* data */ |
| default: /* hope the app knows what it is doing */ |
| bc = "8890"; /* unrestricted digital information */ |
| } |
| //FIXME add missing si1 values from 1TR6, inspect si2, set HLC/LLC |
| |
| length[AT_DIAL ] = 1 + strlen(sp->phone) + 1 + 1; |
| l = strlen(sp->eazmsn); |
| length[AT_MSN ] = l ? 6 + l + 1 + 1 : 0; |
| length[AT_BC ] = 5 + strlen(bc) + 1 + 1; |
| length[AT_PROTO] = 6 + 1 + 1 + 1; /* proto: 1 character */ |
| length[AT_ISO ] = 6 + 1 + 1 + 1; /* channel: 1 character */ |
| length[AT_TYPE ] = 6 + 1 + 1 + 1; /* call type: 1 character */ |
| length[AT_HLC ] = 0; |
| |
| for (i = 0; i < AT_NUM; ++i) { |
| kfree(bcs->commands[i]); |
| bcs->commands[i] = NULL; |
| if (length[i] && |
| !(bcs->commands[i] = kmalloc(length[i], GFP_ATOMIC))) { |
| dev_err(bcs->cs->dev, "out of memory\n"); |
| return -ENOMEM; |
| } |
| } |
| |
| /* type = 1: extern, 0: intern, 2: recall, 3: door, 4: centrex */ |
| if (sp->phone[0] == '*' && sp->phone[1] == '*') { |
| /* internal call: translate ** prefix to CTP value */ |
| snprintf(bcs->commands[AT_DIAL], length[AT_DIAL], |
| "D%s\r", sp->phone+2); |
| strncpy(bcs->commands[AT_TYPE], "^SCTP=0\r", length[AT_TYPE]); |
| } else { |
| snprintf(bcs->commands[AT_DIAL], length[AT_DIAL], |
| "D%s\r", sp->phone); |
| strncpy(bcs->commands[AT_TYPE], "^SCTP=1\r", length[AT_TYPE]); |
| } |
| |
| if (bcs->commands[AT_MSN]) |
| snprintf(bcs->commands[AT_MSN], length[AT_MSN], |
| "^SMSN=%s\r", sp->eazmsn); |
| snprintf(bcs->commands[AT_BC ], length[AT_BC ], |
| "^SBC=%s\r", bc); |
| snprintf(bcs->commands[AT_PROTO], length[AT_PROTO], |
| "^SBPR=%u\r", proto); |
| snprintf(bcs->commands[AT_ISO ], length[AT_ISO ], |
| "^SISO=%u\r", (unsigned)bcs->channel + 1); |
| |
| return 0; |
| } |
| |
| int gigaset_isdn_setup_accept(struct at_state_t *at_state) |
| { |
| unsigned proto; |
| size_t length[AT_NUM]; |
| int i; |
| struct bc_state *bcs = at_state->bcs; |
| |
| switch (bcs->proto2) { |
| case ISDN_PROTO_L2_HDLC: |
| proto = 1; /* 0: Bitsynchron, 1: HDLC, 2: voice */ |
| break; |
| case ISDN_PROTO_L2_TRANS: |
| proto = 2; /* 0: Bitsynchron, 1: HDLC, 2: voice */ |
| break; |
| default: |
| dev_err(at_state->cs->dev, "%s: invalid protocol: %u\n", |
| __func__, bcs->proto2); |
| return -EINVAL; |
| } |
| |
| length[AT_DIAL ] = 0; |
| length[AT_MSN ] = 0; |
| length[AT_BC ] = 0; |
| length[AT_PROTO] = 6 + 1 + 1 + 1; /* proto: 1 character */ |
| length[AT_ISO ] = 6 + 1 + 1 + 1; /* channel: 1 character */ |
| length[AT_TYPE ] = 0; |
| length[AT_HLC ] = 0; |
| |
| for (i = 0; i < AT_NUM; ++i) { |
| kfree(bcs->commands[i]); |
| bcs->commands[i] = NULL; |
| if (length[i] && |
| !(bcs->commands[i] = kmalloc(length[i], GFP_ATOMIC))) { |
| dev_err(at_state->cs->dev, "out of memory\n"); |
| return -ENOMEM; |
| } |
| } |
| |
| snprintf(bcs->commands[AT_PROTO], length[AT_PROTO], |
| "^SBPR=%u\r", proto); |
| snprintf(bcs->commands[AT_ISO ], length[AT_ISO ], |
| "^SISO=%u\r", (unsigned) bcs->channel + 1); |
| |
| return 0; |
| } |
| |
| int gigaset_isdn_icall(struct at_state_t *at_state) |
| { |
| struct cardstate *cs = at_state->cs; |
| struct bc_state *bcs = at_state->bcs; |
| isdn_ctrl response; |
| int retval; |
| |
| /* fill ICALL structure */ |
| response.parm.setup.si1 = 0; /* default: unknown */ |
| response.parm.setup.si2 = 0; |
| response.parm.setup.screen = 0; //FIXME how to set these? |
| response.parm.setup.plan = 0; |
| if (!at_state->str_var[STR_ZBC]) { |
| /* no BC (internal call): assume speech, A-law */ |
| response.parm.setup.si1 = 1; |
| } else if (!strcmp(at_state->str_var[STR_ZBC], "8890")) { |
| /* unrestricted digital information */ |
| response.parm.setup.si1 = 7; |
| } else if (!strcmp(at_state->str_var[STR_ZBC], "8090A3")) { |
| /* speech, A-law */ |
| response.parm.setup.si1 = 1; |
| } else if (!strcmp(at_state->str_var[STR_ZBC], "9090A3")) { |
| /* 3,1 kHz audio, A-law */ |
| response.parm.setup.si1 = 1; |
| response.parm.setup.si2 = 2; |
| } else { |
| dev_warn(cs->dev, "RING ignored - unsupported BC %s\n", |
| at_state->str_var[STR_ZBC]); |
| return ICALL_IGNORE; |
| } |
| if (at_state->str_var[STR_NMBR]) { |
| strncpy(response.parm.setup.phone, at_state->str_var[STR_NMBR], |
| sizeof response.parm.setup.phone - 1); |
| response.parm.setup.phone[sizeof response.parm.setup.phone - 1] = 0; |
| } else |
| response.parm.setup.phone[0] = 0; |
| if (at_state->str_var[STR_ZCPN]) { |
| strncpy(response.parm.setup.eazmsn, at_state->str_var[STR_ZCPN], |
| sizeof response.parm.setup.eazmsn - 1); |
| response.parm.setup.eazmsn[sizeof response.parm.setup.eazmsn - 1] = 0; |
| } else |
| response.parm.setup.eazmsn[0] = 0; |
| |
| if (!bcs) { |
| dev_notice(cs->dev, "no channel for incoming call\n"); |
| response.command = ISDN_STAT_ICALLW; |
| response.arg = 0; //FIXME |
| } else { |
| gig_dbg(DEBUG_CMD, "Sending ICALL"); |
| response.command = ISDN_STAT_ICALL; |
| response.arg = bcs->channel; //FIXME |
| } |
| response.driver = cs->myid; |
| retval = cs->iif.statcallb(&response); |
| gig_dbg(DEBUG_CMD, "Response: %d", retval); |
| switch (retval) { |
| case 0: /* no takers */ |
| return ICALL_IGNORE; |
| case 1: /* alerting */ |
| bcs->chstate |= CHS_NOTIFY_LL; |
| return ICALL_ACCEPT; |
| case 2: /* reject */ |
| return ICALL_REJECT; |
| case 3: /* incomplete */ |
| dev_warn(cs->dev, |
| "LL requested unsupported feature: Incomplete Number\n"); |
| return ICALL_IGNORE; |
| case 4: /* proceeding */ |
| /* Gigaset will send ALERTING anyway. |
| * There doesn't seem to be a way to avoid this. |
| */ |
| return ICALL_ACCEPT; |
| case 5: /* deflect */ |
| dev_warn(cs->dev, |
| "LL requested unsupported feature: Call Deflection\n"); |
| return ICALL_IGNORE; |
| default: |
| dev_err(cs->dev, "LL error %d on ICALL\n", retval); |
| return ICALL_IGNORE; |
| } |
| } |
| |
| /* Set Callback function pointer */ |
| int gigaset_register_to_LL(struct cardstate *cs, const char *isdnid) |
| { |
| isdn_if *iif = &cs->iif; |
| |
| gig_dbg(DEBUG_ANY, "Register driver capabilities to LL"); |
| |
| //iif->id[sizeof(iif->id) - 1]=0; |
| //strncpy(iif->id, isdnid, sizeof(iif->id) - 1); |
| if (snprintf(iif->id, sizeof iif->id, "%s_%u", isdnid, cs->minor_index) |
| >= sizeof iif->id) |
| return -ENOMEM; //FIXME EINVAL/...?? |
| |
| iif->owner = THIS_MODULE; |
| iif->channels = cs->channels; |
| iif->maxbufsize = MAX_BUF_SIZE; |
| iif->features = ISDN_FEATURE_L2_TRANS | |
| ISDN_FEATURE_L2_HDLC | |
| #ifdef GIG_X75 |
| ISDN_FEATURE_L2_X75I | |
| #endif |
| ISDN_FEATURE_L3_TRANS | |
| ISDN_FEATURE_P_EURO; |
| iif->hl_hdrlen = HW_HDR_LEN; /* Area for storing ack */ |
| iif->command = command_from_LL; |
| iif->writebuf_skb = writebuf_from_LL; |
| iif->writecmd = NULL; /* Don't support isdnctrl */ |
| iif->readstat = NULL; /* Don't support isdnctrl */ |
| iif->rcvcallb_skb = NULL; /* Will be set by LL */ |
| iif->statcallb = NULL; /* Will be set by LL */ |
| |
| if (!register_isdn(iif)) |
| return 0; |
| |
| cs->myid = iif->channels; /* Set my device id */ |
| return 1; |
| } |