V4L/DVB (11771): cx23885: add DVB-T tuning support for Hauppauge WinTV-HVR1210

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 604ceb1..82fc257 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -193,6 +193,10 @@
 		.name		= "Hauppauge WinTV-HVR1255",
 		.portc		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1210] = {
+		.name		= "Hauppauge WinTV-HVR1210",
+		.portc		= CX23885_MPEG_DVB,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -304,6 +308,14 @@
 		.subvendor = 0x0070,
 		.subdevice = 0x2251,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1255,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2291,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2295,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -646,9 +658,10 @@
 	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1210:
 		/* GPIO-5 RF Control: 0 = RF1 Terrestrial, 1 = RF2 Cable */
-		/* GPIO-6 I2C Gate which can isolate the 3305 from the bus */
-		/* GPIO-9 LG3305 reset */
+		/* GPIO-6 I2C Gate which can isolate the demod from the bus */
+		/* GPIO-9 Demod reset */
 
 		/* Put the parts into reset and back */
 		cx23885_gpio_enable(dev, GPIO_9 | GPIO_6 | GPIO_5, 1);
@@ -672,6 +685,7 @@
 	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1210:
 		/* FIXME: Implement me */
 		break;
 	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
@@ -710,6 +724,7 @@
 	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1210:
 		if (dev->i2c_bus[0].i2c_rc == 0)
 			hauppauge_eeprom(dev, eeprom+0xc0);
 		break;
@@ -770,6 +785,7 @@
 	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1210:
 	default:
 		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */