diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h
index d319f2e..da0b404 100644
--- a/drivers/pcmcia/ti113x.h
+++ b/drivers/pcmcia/ti113x.h
@@ -59,6 +59,7 @@
 
 #define  TI122X_SCR_SER_STEP		0xc0000000
 #define  TI122X_SCR_INTRTIE		0x20000000
+#define  TIXX21_SCR_TIEALL		0x10000000
 #define  TI122X_SCR_CBRSVD		0x00400000
 #define  TI122X_SCR_MRBURSTDN		0x00008000
 #define  TI122X_SCR_MRBURSTUP		0x00004000
@@ -624,6 +625,7 @@
 	int devfn;
 	unsigned int state;
 	int ret = 1;
+	u32 sysctl;
 
 	/* catch the two-slot controllers */
 	switch (socket->dev->device) {
@@ -646,6 +648,24 @@
 		 */
 		break;
 
+	case PCI_DEVICE_ID_TI_X515:
+	case PCI_DEVICE_ID_TI_X420:
+	case PCI_DEVICE_ID_TI_X620:
+	case PCI_DEVICE_ID_TI_XX21_XX11:
+	case PCI_DEVICE_ID_TI_7410:
+	case PCI_DEVICE_ID_TI_7610:
+		/*
+		 * those are either single or dual slot CB with additional functions
+		 * like 1394, smartcard reader, etc. check the TIEALL flag for them
+		 * the TIEALL flag binds the IRQ of all functions toghether.
+		 * we catch the single slot variants later.
+		 */
+		sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
+		if (sysctl & TIXX21_SCR_TIEALL)
+			return 0;
+
+		break;
+
 	/* single-slot controllers have the 2nd slot empty always :) */
 	default:
 		return 1;
@@ -658,6 +678,15 @@
 	if (!func)
 		return 1;
 
+	/*
+	 * check that the device id of both slots match. this is needed for the
+	 * XX21 and the XX11 controller that share the same device id for single
+	 * and dual slot controllers. return '2nd slot empty'. we already checked
+	 * if the interrupt is tied to another function.
+	 */
+	if (socket->dev->device != func->device)
+		goto out;
+
 	slot2 = pci_get_drvdata(func);
 	if (!slot2)
 		goto out;
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 80806c9..c3e22fc 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -1249,6 +1249,14 @@
 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1250, TI1250),
 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1410, TI1250),
 
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XX21_XX11, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X515, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X420, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X620, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7410, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7510, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7610, TI12XX),
+
 	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1211, ENE),
 	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, ENE),
 	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, ENE),
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 92efb2c..68f11ac 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -769,6 +769,8 @@
 #define PCI_DEVICE_ID_TI_TVP4010	0x3d04
 #define PCI_DEVICE_ID_TI_TVP4020	0x3d07
 #define PCI_DEVICE_ID_TI_4450		0x8011
+#define PCI_DEVICE_ID_TI_XX21_XX11	0x8031
+#define PCI_DEVICE_ID_TI_X515		0x8036
 #define PCI_DEVICE_ID_TI_1130		0xac12
 #define PCI_DEVICE_ID_TI_1031		0xac13
 #define PCI_DEVICE_ID_TI_1131		0xac15
@@ -785,12 +787,17 @@
 #define PCI_DEVICE_ID_TI_4451		0xac42
 #define PCI_DEVICE_ID_TI_4510		0xac44
 #define PCI_DEVICE_ID_TI_4520		0xac46
+#define PCI_DEVICE_ID_TI_7510		0xac47
+#define PCI_DEVICE_ID_TI_7610		0xac48
+#define PCI_DEVICE_ID_TI_7410		0xac49
 #define PCI_DEVICE_ID_TI_1410		0xac50
 #define PCI_DEVICE_ID_TI_1420		0xac51
 #define PCI_DEVICE_ID_TI_1451A		0xac52
 #define PCI_DEVICE_ID_TI_1620		0xac54
 #define PCI_DEVICE_ID_TI_1520		0xac55
 #define PCI_DEVICE_ID_TI_1510		0xac56
+#define PCI_DEVICE_ID_TI_X620		0xac8d
+#define PCI_DEVICE_ID_TI_X420		0xac8e
 
 #define PCI_VENDOR_ID_SONY		0x104d
 #define PCI_DEVICE_ID_SONY_CXD3222	0x8039