msm: Add necessary support to build fsm9900 target
Add the Kconfig and Makefile entries needed to support
the FSM9900 target
Change-Id: I3f995df7357640d3679b6c14e609e9a529fc508a
Acked-by: Kaushik Sikdar <ksikdar@qti.qualcomm.com>
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 0eecffd..da1d9cb 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -317,6 +317,25 @@
select SPARSE_IRQ
select MSM_NOPM
+config ARCH_FSM9900
+ bool "FSM9900"
+ select ARCH_MSM_KRAITMP
+ select GPIO_MSM_V3
+ select ARM_GIC
+ select CPU_V7
+ select MSM_SCM
+ select MSM_GPIOMUX
+ select MULTI_IRQ_HANDLER
+ select MSM_PIL
+ select MSM_NATIVE_RESTART
+ select MSM_RESTART_V2
+ select MAY_HAVE_SPARSE_IRQ
+ select SPARSE_IRQ
+ select REGULATOR
+ select ARM_HAS_SG_CHAIN
+ select MSM_RUN_QUEUE_STATS
+ select MSM_NOPM
+
config ARCH_FSM9XXX
bool "FSM9XXX"
select ARCH_MSM_SCORPION
@@ -1094,6 +1113,7 @@
default "0x00000000" if ARCH_MSM8226
default "0x00000000" if ARCH_MSM8610
default "0x10000000" if ARCH_FSM9XXX
+ default "0x00000000" if ARCH_FSM9900
default "0x00200000" if ARCH_MSM9625
default "0x00000000" if ARCH_MSMKRYPTON
default "0x00200000" if !MSM_STACKED_MEMORY
@@ -1257,6 +1277,14 @@
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM9625 devices.
+
+ config DEBUG_FSM9900_UART
+ bool "Kernel low-level debugging messages via FSM9900 UART"
+ depends on ARCH_FSM9900
+ select MSM_HAS_DEBUG_UART_HS_V14
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on FSM9900 devices.
endchoice
choice
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 400f859..f53b7fe 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -121,6 +121,7 @@
ifndef CONFIG_ARCH_MSM8610
ifndef CONFIG_ARCH_APQ8084
ifndef CONFIG_ARCH_MSMKRYPTON
+ifndef CONFIG_ARCH_FSM9900
obj-y += nand_partitions.o
endif
endif
@@ -132,6 +133,7 @@
endif
endif
endif
+endif
obj-$(CONFIG_MSM_SDIO_TTY) += sdio_tty.o
obj-$(CONFIG_MSM_SMD_TTY) += smd_tty.o
obj-$(CONFIG_MSM_SMD_QMI) += smd_qmi.o
@@ -230,6 +232,7 @@
obj-$(CONFIG_ARCH_FSM9XXX) += clock-fsm9xxx.o clock-local.o acpuclock-fsm9xxx.o
obj-$(CONFIG_ARCH_FSM9XXX) += dfe-fsm9xxx.o rfic-fsm9xxx.o
obj-$(CONFIG_ARCH_FSM9XXX) += restart-fsm9xxx.o xo-fsm9xxx.o
+obj-$(CONFIG_ARCH_FSM9900) += board-fsm9900.o board-fsm9900-gpiomux.o
obj-$(CONFIG_MSM_WATCHDOG) += msm_watchdog.o
obj-$(CONFIG_MSM_WATCHDOG) += msm_watchdog_asm.o
@@ -377,6 +380,7 @@
obj-$(CONFIG_ARCH_MSM8226) += gpiomux-v2.o gpiomux.o
obj-$(CONFIG_ARCH_MSM8610) += gpiomux-v2.o gpiomux.o
obj-$(CONFIG_ARCH_APQ8084) += gpiomux-v2.o gpiomux.o
+obj-$(CONFIG_ARCH_FSM9900) += gpiomux-v2.o gpiomux.o
obj-$(CONFIG_MSM_SLEEP_STATS_DEVICE) += idle_stats_device.o
obj-$(CONFIG_MSM_DCVS) += msm_dcvs_scm.o msm_dcvs.o msm_mpdecision.o
diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot
index 2827e65..07969e0 100644
--- a/arch/arm/mach-msm/Makefile.boot
+++ b/arch/arm/mach-msm/Makefile.boot
@@ -93,6 +93,11 @@
params_phys-$(CONFIG_ARCH_FSM9XXX) := 0x10000100
initrd_phys-$(CONFIG_ARCH_FSM9XXX) := 0x12000000
+# FSM9900
+ zreladdr-$(CONFIG_ARCH_FSM9900) := 0x00008000
+ dtb-$(CONFIG_ARCH_FSM9900) := fsm9900-rumi.dtb
+ dtb-$(CONFIG_ARCH_FSM9900) := fsm9900-sim.dtb
+
# MPQ8092
zreladdr-$(CONFIG_ARCH_MPQ8092) := 0x00008000