input: touchscreen: Add support for synaptics clearpad3000
Change-Id: Ie00815ed507d81c6934ac0d4b1dfa745215ff01a
Signed-off-by: Taniya Das <tdas@codeaurora.org>
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index aaa650b..87cdb02 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -414,6 +414,18 @@
help
This enables support for Synaptics RMI over I2C based touchscreens.
+config TOUCHSCREEN_SYNAPTICS_RMI4_I2C
+ tristate "Synaptics i2c touchscreen(ClearPad 3000)"
+ depends on I2C
+ select SYNA_MULTI_TOUCH
+ help
+ This enables support for Synaptics RMI over I2C based touchscreens(ClearPad 3000).
+
+config SYNA_MULTI_TOUCH
+ tristate "Synaptics i2c touchscreen(ClearPad 3000) MutilTouch support"
+ depends on TOUCHSCREEN_SYNAPTICS_RMI4_I2C
+ default y
+
config TOUCHSCREEN_TOUCHRIGHT
tristate "Touchright serial touchscreen"
select SERIO
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index bfe9daf..1d67427 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -48,6 +48,7 @@
obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o
obj-$(CONFIG_TOUCHSCREEN_TNETV107X) += tnetv107x-ts.o
obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI) += synaptics_i2c_rmi.o
+obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_I2C) +=synaptics/
obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o
diff --git a/drivers/input/touchscreen/synaptics/Makefile b/drivers/input/touchscreen/synaptics/Makefile
new file mode 100644
index 0000000..32cbd76
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/Makefile
@@ -0,0 +1,11 @@
+CFLAGS_rmi_bus.o := -DDEBUG
+CFLAGS_rmi_sensor.o := -DDEBUG
+CFLAGS_rmi_function.o := -DDEBUG
+CFLAGS_rmi_f01.o := -DDEBUG
+CFLAGS_rmi_f05.o := -DDEBUG
+CFLAGS_rmi_f11.o := -DDEBUG
+CFLAGS_rmi_f19.o := -DDEBUG
+CFLAGS_rmi_f34.o := -DDEBUG
+CFLAGS_rmi_i2c.o := -DDEBUG
+CFLAGS_rmi_spi.o := -DDEBUG
+obj-y += rmi_bus.o rmi_sensor.o rmi_function.o rmi_f01.o rmi_f05.o rmi_f11.o rmi_f19.o rmi_f34.o rmi_i2c.o
diff --git a/drivers/input/touchscreen/synaptics/rmi.h b/drivers/input/touchscreen/synaptics/rmi.h
new file mode 100644
index 0000000..7484258
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi.h
@@ -0,0 +1,164 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Header File.
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#ifndef _RMI_H
+#define _RMI_H
+
+/* RMI4 Protocol Support
+ */
+
+/* For each function present on the RMI device, we need to get the RMI4 Function
+ * Descriptor info from the Page Descriptor Table. This will give us the
+ * addresses for Query, Command, Control, Data and the Source Count (number
+ * of sources for this function) and the function id.
+ */
+struct rmi_function_descriptor {
+ unsigned char queryBaseAddr;
+ unsigned char commandBaseAddr;
+ unsigned char controlBaseAddr;
+ unsigned char dataBaseAddr;
+ unsigned char interruptSrcCnt;
+ unsigned char functionNum;
+};
+
+/* This encapsulates the information found using the RMI4 Function $01
+ * query registers. There is only one Function $01 per device.
+ *
+ * Assuming appropriate endian-ness, you can populate most of this
+ * structure by reading query registers starting at the query base address
+ * that was obtained from RMI4 function 0x01 function descriptor info read
+ * from the Page Descriptor Table.
+ *
+ * Specific register information is provided in the comments for each field.
+ * For further reference, please see the "Synaptics RMI 4 Interfacing
+ * Guide" document : go to http://www.synaptics.com/developers/manuals - and
+ * select "Synaptics RMI 4 Interfacting Guide".
+ */
+struct rmi_F01_query {
+ /* The manufacturer identification byte.*/
+ unsigned char mfgid;
+
+ /* The Product Properties information.*/
+ unsigned char properties;
+
+ /* The product info bytes.*/
+ unsigned char prod_info[2];
+
+ /* Date Code - Year, Month, Day.*/
+ unsigned char date_code[3];
+
+ /* Tester ID (14 bits).*/
+ unsigned short tester_id;
+
+ /* Serial Number (14 bits).*/
+ unsigned short serial_num;
+
+ /* A null-terminated string that identifies this particular product.*/
+ char prod_id[11];
+};
+
+/* This encapsulates the F01 Device Control control registers.
+ * TODO: This isn't right. The number of interrupt enables needs to be determined
+ * dynamically as the sensor is initialized. Fix this.
+ */
+struct rmi_F01_control {
+ unsigned char deviceControl;
+ unsigned char interruptEnable[1];
+};
+
+/** This encapsulates the F01 Device Control data registers.
+ * TODO: This isn't right. The number of irqs needs to be determined
+ * dynamically as the sensor is initialized. Fix this.
+ */
+struct rmi_F01_data {
+ unsigned char deviceStatus;
+ unsigned char irqs[1];
+};
+
+
+/**********************************************************/
+
+/** This is the data read from the F11 query registers.
+ */
+struct rmi_F11_device_query {
+ bool hasQuery9;
+ unsigned char numberOfSensors;
+};
+
+struct rmi_F11_sensor_query {
+ bool configurable;
+ bool hasSensitivityAdjust;
+ bool hasGestures;
+ bool hasAbs;
+ bool hasRel;
+ unsigned char numberOfFingers;
+ unsigned char numberOfXElectrodes;
+ unsigned char numberOfYElectrodes;
+ unsigned char maximumElectrodes;
+ bool hasAnchoredFinger;
+ unsigned char absDataSize;
+};
+
+struct rmi_F11_control {
+ bool relativeBallistics;
+ bool relativePositionFilter;
+ bool absolutePositionFilter;
+ unsigned char reportingMode;
+ bool manuallyTrackedFinger;
+ bool manuallyTrackedFingerEnable;
+ unsigned char motionSensitivity;
+ unsigned char palmDetectThreshold;
+ unsigned char deltaXPosThreshold;
+ unsigned char deltaYPosThreshold;
+ unsigned char velocity;
+ unsigned char acceleration;
+ unsigned short sensorMaxXPos;
+ unsigned short sensorMaxYPos;
+};
+
+
+/**********************************************************/
+
+/** This is the data read from the F19 query registers.
+ */
+struct rmi_F19_query {
+ bool hasHysteresisThreshold;
+ bool hasSensitivityAdjust;
+ bool configurable;
+ unsigned char buttonCount;
+};
+
+struct rmi_F19_control {
+ unsigned char buttonUsage;
+ unsigned char filterMode;
+ unsigned char *intEnableRegisters;
+ unsigned char *singleButtonControl;
+ unsigned char *sensorMap;
+ unsigned char *singleButtonSensitivity;
+ unsigned char globalSensitivityAdjustment;
+ unsigned char globalHysteresisThreshold;
+};
+
+#endif
diff --git a/drivers/input/touchscreen/synaptics/rmi_bus.c b/drivers/input/touchscreen/synaptics/rmi_bus.c
new file mode 100644
index 0000000..c24ee22
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_bus.c
@@ -0,0 +1,401 @@
+/**
+ * Synaptics Register Mapped Interface (RMI4) - RMI Bus Module.
+ * Copyright (C) 2007 - 2011, Synaptics Incorporated
+ *
+ * Impliments "rmi" bus per Documentation/driver-model/bus.txt
+ *
+ * This protocol is layered as follows.
+ *
+ *
+ *
+ * +-------+ +-------+ +-------+ +--------+
+ * | Fn32 | | Fn11| | Fn19 | | Fn11 | Devices/Functions
+ * *---|---+ +--|----+ +----|--+ +----|---* (2D, cap. btns, etc.)
+ * | | | |
+ * +----------------+ +----------------+
+ * | Sensor0 | | Sensor1 | Sensors Dev/Drivers
+ * +----------------+ +----------------+ (a sensor has one or
+ * | | more functions)
+ * | |
+ * +----------------------------------------+
+ * | |
+ * | RMI4 Bus | RMI Bus Layer
+ * | (this file) |
+ * *--|-----|------|--------------|---------*
+ * | | | |
+ * | | | |
+ * +-----+-----+-------+--------------------+
+ * | I2C | SPI | SMBus | etc. | Physical Layer
+ * +-----+-----+-------+--------------------+
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+static const char busname[] = "rmi";
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/hrtimer.h>
+#include <linux/list.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/input/rmi_platformdata.h>
+
+#include "rmi_drvr.h"
+#include "rmi.h"
+#include "rmi_bus.h"
+#include "rmi_sensor.h"
+#include "rmi_function.h"
+
+/* list of physical drivers - i2c, spi, etc. */
+static LIST_HEAD(phys_drivers);
+static DEFINE_MUTEX(phys_drivers_mutex);
+
+/* list of sensors found on a physical bus (i2c, smi, etc.)*/
+static LIST_HEAD(sensor_drivers);
+static DEFINE_MUTEX(sensor_drivers_mutex);
+static LIST_HEAD(sensor_devices);
+static DEFINE_MUTEX(sensor_devices_mutex);
+
+#define PDT_START_SCAN_LOCATION 0x00E9
+#define PDT_END_SCAN_LOCATION 0x0005
+#define PDT_ENTRY_SIZE 0x0006
+
+/* definitions for rmi bus */
+struct device rmi_bus_device;
+
+struct bus_type rmi_bus_type;
+EXPORT_SYMBOL(rmi_bus_type);
+
+
+/*
+ * This method is called, perhaps multiple times, whenever a new device or driver
+ * is added for this bus. It should return a nonzero value if the given device can be
+ * handled by the given driver. This function must be handled at the bus level,
+ * because that is where the proper logic exists; the core kernel cannot know how
+ * to match devices and drivers for every possible bus type
+ * The match function does a comparison between the hardware ID provided by
+ * the device itself and the IDs supported by the driver.
+ *
+ */
+static int rmi_bus_match(struct device *dev, struct device_driver *driver)
+{
+ printk(KERN_DEBUG "%s: Matching %s for rmi bus.\n", __func__, dev->bus->name);
+ return !strncmp(dev->bus->name, driver->name, strlen(driver->name));
+}
+
+/** Stub for now.
+ */
+static int rmi_bus_suspend(struct device *dev, pm_message_t state)
+{
+ printk(KERN_INFO "%s: RMI bus suspending.", __func__);
+ return 0;
+}
+
+/** Stub for now.
+ */
+static int rmi_bus_resume(struct device *dev)
+{
+ printk(KERN_INFO "%s: RMI bus resuming.", __func__);
+ return 0;
+}
+
+/*
+ * This method is called, whenever a new device is added for this bus.
+ * It will scan the devices PDT to get the function $01 query, control,
+ * command and data regsiters so that it can create a function $01 (sensor)
+ * device for the new physical device. It also caches the PDT for later use by
+ * other functions that are created for the device. For example, if a function
+ * $11 is found it will need the query, control, command and data register
+ * addresses for that function. The new function could re-scan the PDT but
+ * since it is being done here we can cache it and keep it around.
+ *
+ * TODO: If the device is reset or some action takes place that would invalidate
+ * the PDT - such as a reflash of the firmware - then the device should be re-added
+ * to the bus and the PDT re-scanned and cached.
+ *
+ */
+int rmi_register_sensor(struct rmi_phys_driver *rpd, struct rmi_sensordata *sensordata)
+{
+ int i;
+ int pdt_entry_count = 0;
+ struct rmi_sensor_device *rmi_sensor_dev;
+ struct rmi_function_info *rfi;
+ struct rmi_function_descriptor rmi_fd;
+ int retval;
+ static int index;
+
+ /* Make sure we have a read, write, read_multiple, write_multiple
+ function pointers from whatever physical layer the sensor is on.
+ */
+ if (!rpd->name) {
+ printk(KERN_ERR "%s: Physical driver must specify a name",
+ __func__);
+ return -EINVAL;
+ }
+ if (!rpd->write) {
+ printk(KERN_ERR
+ "%s: Physical driver %s must specify a writer.",
+ __func__, rpd->name);
+ return -EINVAL;
+ }
+ if (!rpd->read) {
+ printk(KERN_ERR
+ "%s: Physical driver %s must specify a reader.",
+ __func__, rpd->name);
+ return -EINVAL;
+ }
+ if (!rpd->write_multiple) {
+ printk(KERN_ERR "%s: Physical driver %s must specify a "
+ "multiple writer.",
+ __func__, rpd->name);
+ return -EINVAL;
+ }
+ if (!rpd->read_multiple) {
+ printk(KERN_ERR "%s: Physical driver %s must specify a "
+ "multiple reader.",
+ __func__, rpd->name);
+ return -EINVAL;
+ }
+
+ /* Get some information from the device */
+ printk(KERN_DEBUG "%s: Identifying sensors by presence of F01...", __func__);
+
+ rmi_sensor_dev = NULL;
+
+ /* Scan the page descriptor table until we find F01. If we find that,
+ * we assume that we can reliably talk to this sensor.
+ */
+ for (i = PDT_START_SCAN_LOCATION; /* Register the rmi sensor driver */
+ i >= PDT_END_SCAN_LOCATION;
+ i -= PDT_ENTRY_SIZE) {
+ retval = rpd->read_multiple(rpd, i, (char *)&rmi_fd,
+ sizeof(rmi_fd));
+ if (!retval) {
+ rfi = NULL;
+
+ if (rmi_fd.functionNum != 0x00 && rmi_fd.functionNum != 0xff) {
+ pdt_entry_count++;
+ if ((rmi_fd.functionNum & 0xff) == 0x01) {
+ printk(KERN_DEBUG "%s: F01 Found - RMI Device Control", __func__);
+
+ /* This appears to be a valid device, so create a sensor
+ * device and sensor driver for it. */
+ rmi_sensor_dev = kzalloc(sizeof(*rmi_sensor_dev), GFP_KERNEL);
+ if (!rmi_sensor_dev) {
+ printk(KERN_ERR "%s: Error allocating memory for rmi_sensor_device\n", __func__);
+ retval = -ENOMEM;
+ goto exit_fail;
+ }
+ rmi_sensor_dev->dev.bus = &rmi_bus_type;
+
+ retval = rmi_sensor_register_device(rmi_sensor_dev, index++);
+ if (retval < 0) {
+ printk(KERN_ERR "%s: Error %d registering sensor device.", __func__, retval);
+ goto exit_fail;
+ }
+
+ rmi_sensor_dev->driver = kzalloc(sizeof(struct rmi_sensor_driver), GFP_KERNEL);
+ if (!rmi_sensor_dev->driver) {
+ printk(KERN_ERR "%s: Error allocating memory for rmi_sensor_driver\n", __func__);
+ retval = -ENOMEM;
+ goto exit_fail;
+ }
+ rmi_sensor_dev->driver->sensor_device = rmi_sensor_dev;
+ rmi_sensor_dev->driver->polling_required = rpd->polling_required;
+ rmi_sensor_dev->driver->rpd = rpd;
+ if (sensordata)
+ rmi_sensor_dev->driver->perfunctiondata = sensordata->perfunctiondata;
+ INIT_LIST_HEAD(&rmi_sensor_dev->driver->functions);
+
+ retval = rmi_sensor_register_driver(rmi_sensor_dev->driver);
+ if (retval < 0) {
+ printk(KERN_ERR "%s: Error %d registering sensor driver.", __func__, retval);
+ goto exit_fail;
+ }
+
+ /* link the attention fn in the rpd to the sensor attn fn */
+
+ rpd->sensor = rmi_sensor_dev->driver;
+ rpd->attention = rmi_sensor_dev->driver->attention;
+
+ /* Add it into the list of sensors on the rmi bus */
+ mutex_lock(&sensor_devices_mutex);
+ list_add_tail(&rmi_sensor_dev->sensors, &sensor_devices);
+ mutex_unlock(&sensor_devices_mutex);
+
+ /* All done with this sensor, fall out of PDT scan loop. */
+ break;
+ } else {
+ /* Just print out the function found for now */
+ printk(KERN_DEBUG "%s: Found Function %02x - Ignored.\n", __func__, rmi_fd.functionNum & 0xff);
+ }
+ } else {
+ /* A zero or 0xff in the function number
+ signals the end of the PDT */
+ pr_debug("%s: Found End of PDT.",
+ __func__);
+ break;
+ }
+ } else {
+ /* failed to read next PDT entry - end PDT
+ scan - this may result in an incomplete set
+ of recognized functions - should probably
+ return an error but the driver may still be
+ viable for diagnostics and debugging so let's
+ let it continue. */
+ printk(KERN_ERR "%s: Read Error %d when reading next PDT entry - "
+ "ending PDT scan.",
+ __func__, retval);
+ break;
+ }
+ }
+
+ /* If we actually found a sensor, keep it around. */
+ if (rmi_sensor_dev) {
+ /* Add physical driver struct to list */
+ mutex_lock(&phys_drivers_mutex);
+ list_add_tail(&rpd->drivers, &phys_drivers);
+ mutex_unlock(&phys_drivers_mutex);
+ printk(KERN_DEBUG "%s: Registered sensor drivers.", __func__);
+ retval = 0;
+ } else {
+ printk(KERN_ERR "%s: Failed to find sensor. PDT contained %d entries.", __func__, pdt_entry_count);
+ retval = -ENODEV;
+ }
+
+exit_fail:
+ return retval;
+}
+EXPORT_SYMBOL(rmi_register_sensor);
+
+int rmi_unregister_sensors(struct rmi_phys_driver *rpd)
+{
+ if (rpd->sensor) {
+ printk(KERN_WARNING "%s: WARNING: unregister of %s while %s still attached.",
+ __func__, rpd->name, rpd->sensor->drv.name);
+ }
+
+ pr_debug("%s: Unregistering sensor drivers %s\n", __func__, rpd->name);
+
+ /* TODO: We should call sensor_teardown() for each sensor before we get
+ * rid of this list.
+ */
+
+ mutex_lock(&sensor_drivers_mutex);
+ list_del(&rpd->sensor->sensor_drivers);
+ mutex_unlock(&sensor_drivers_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(rmi_unregister_sensors);
+
+
+static void rmi_bus_dev_release(struct device *dev)
+{
+ printk(KERN_DEBUG "rmi bus device release\n");
+}
+
+
+int rmi_register_bus_device(struct device *rmibusdev)
+{
+ printk(KERN_DEBUG "%s: Registering RMI4 bus device.\n", __func__);
+
+ /* Here, we simply fill in some of the embedded device structure fields
+ (which individual drivers should not need to know about), and register
+ the device with the driver core. */
+
+ rmibusdev->bus = &rmi_bus_type;
+ rmibusdev->parent = &rmi_bus_device;
+ rmibusdev->release = rmi_bus_dev_release;
+ dev_set_name(rmibusdev, "rmi");
+
+ /* If we wanted to add bus-specific attributes to the device, we could do so here.*/
+
+ return device_register(rmibusdev);
+}
+EXPORT_SYMBOL(rmi_register_bus_device);
+
+void rmi_unregister_bus_device(struct device *rmibusdev)
+{
+ printk(KERN_DEBUG "%s: Unregistering bus device.", __func__);
+
+ device_unregister(rmibusdev);
+}
+EXPORT_SYMBOL(rmi_unregister_bus_device);
+
+static int __init rmi_bus_init(void)
+{
+ int status;
+
+ status = 0;
+
+ printk(KERN_INFO "%s: RMI Bus Driver Init", __func__);
+
+ /* Register the rmi bus */
+ rmi_bus_type.name = busname;
+ rmi_bus_type.match = rmi_bus_match;
+ rmi_bus_type.suspend = rmi_bus_suspend;
+ rmi_bus_type.resume = rmi_bus_resume;
+ status = bus_register(&rmi_bus_type);
+ if (status < 0) {
+ printk(KERN_ERR "%s: Error %d registering the rmi bus.", __func__, status);
+ goto err_exit;
+ }
+ printk(KERN_DEBUG "%s: registered bus.", __func__);
+
+#if 0
+ /** This doesn't seem to be required any more. It worked OK in Froyo,
+ * but breaks in Gingerbread */
+ /* Register the rmi bus device - "rmi". There is only one rmi bus device. */
+ status = rmi_register_bus_device(&rmi_bus_device);
+ if (status < 0) {
+ printk(KERN_ERR "%s: Error %d registering rmi bus device.", __func__, status);
+ bus_unregister(&rmi_bus_type);
+ goto err_exit;
+ }
+ printk(KERN_DEBUG "%s: Registered bus device.", __func__);
+#endif
+
+ return 0;
+err_exit:
+ return status;
+}
+
+static void __exit rmi_bus_exit(void)
+{
+ printk(KERN_DEBUG "%s: RMI Bus Driver Exit.", __func__);
+
+ /* Unregister the rmi bus device - "rmi". There is only one rmi bus device. */
+ rmi_unregister_bus_device(&rmi_bus_device);
+
+ /* Unregister the rmi bus */
+ bus_unregister(&rmi_bus_type);
+}
+
+
+module_init(rmi_bus_init);
+module_exit(rmi_bus_exit);
+
+MODULE_AUTHOR("Synaptics, Inc.");
+MODULE_DESCRIPTION("RMI4 Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/synaptics/rmi_bus.h b/drivers/input/touchscreen/synaptics/rmi_bus.h
new file mode 100644
index 0000000..1e9bd24
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_bus.h
@@ -0,0 +1,32 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) - RMI Bus Module Header.
+ * Copyright (C) 2007 - 2010, Synaptics Incorporated
+ *
+ */
+/*
+ *
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#ifndef _RMI_BUS_H
+#define _RMI_BUS_H
+
+
+extern struct bus_type rmi_bus_type;
+
+#endif
diff --git a/drivers/input/touchscreen/synaptics/rmi_drvr.h b/drivers/input/touchscreen/synaptics/rmi_drvr.h
new file mode 100644
index 0000000..d8c848d
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_drvr.h
@@ -0,0 +1,104 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) RMI Driver Header File.
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#include "rmi.h"
+
+#ifndef _RMI_DRVR_H
+#define _RMI_DRVR_H
+
+#include <linux/input/rmi_platformdata.h>
+
+/* RMI4 Protocol Support
+ */
+
+struct rmi_phys_driver {
+ char *name;
+ int (*write)(struct rmi_phys_driver *physdrvr, unsigned short address,
+ char data);
+ int (*read)(struct rmi_phys_driver *physdrvr, unsigned short address,
+ char *buffer);
+ int (*write_multiple)(struct rmi_phys_driver *physdrvr,
+ unsigned short address, char *buffer, int length);
+ int (*read_multiple)(struct rmi_phys_driver *physdrvr, unsigned short address,
+ char *buffer, int length);
+ void (*attention)(struct rmi_phys_driver *physdrvr, int instance);
+ bool polling_required;
+ int irq;
+
+ /* Standard kernel linked list implementation.
+ * Documentation on how to use it can be found at
+ * http://isis.poly.edu/kulesh/stuff/src/klist/.
+ */
+ struct list_head drivers;
+ struct rmi_sensor_driver *sensor;
+ struct module *module;
+};
+
+int rmi_read(struct rmi_sensor_driver *sensor, unsigned short address, char *dest);
+int rmi_write(struct rmi_sensor_driver *sensor, unsigned short address,
+ unsigned char data);
+int rmi_read_multiple(struct rmi_sensor_driver *sensor, unsigned short address,
+ char *dest, int length);
+int rmi_write_multiple(struct rmi_sensor_driver *sensor, unsigned short address,
+ unsigned char *data, int length);
+int rmi_register_sensor(struct rmi_phys_driver *physdrvr,
+ struct rmi_sensordata *sensordata);
+int rmi_unregister_sensors(struct rmi_phys_driver *physdrvr);
+
+/* Utility routine to set bits in a register. */
+int rmi_set_bits(struct rmi_sensor_driver *sensor, unsigned short address, unsigned char bits);
+/* Utility routine to clear bits in a register. */
+int rmi_clear_bits(struct rmi_sensor_driver *sensor, unsigned short address, unsigned char bits);
+/* Utility routine to set the value of a bit field in a register. */
+int rmi_set_bit_field(struct rmi_sensor_driver *sensor, unsigned short address,
+ unsigned char field_mask, unsigned char bits);
+
+/* Set this to 1 to turn on code used in detecting buffer leaks. */
+#define RMI_ALLOC_STATS 1
+
+#if RMI_ALLOC_STATS
+extern int appallocsrmi;
+extern int rfiallocsrmi;
+extern int fnallocsrmi;
+
+#define INC_ALLOC_STAT(X) (X##allocsrmi++)
+#define DEC_ALLOC_STAT(X) \
+ do { \
+ if (X##allocsrmi) X##allocsrmi--; \
+ else printk(KERN_DEBUG "Too many " #X " frees\n"); \
+ } while (0)
+#define CHECK_ALLOC_STAT(X) \
+ do { \
+ if (X##allocsrmi) \
+ printk(KERN_DEBUG "Left over " #X " buffers: %d\n", \
+ X##allocsrmi); \
+ } while (0)
+#else
+#define INC_ALLOC_STAT(X) do { } while (0)
+#define DEC_ALLOC_STAT(X) do { } while (0)
+#define CHECK_ALLOC_STAT(X) do { } while (0)
+#endif
+
+#endif
diff --git a/drivers/input/touchscreen/synaptics/rmi_f01.c b/drivers/input/touchscreen/synaptics/rmi_f01.c
new file mode 100644
index 0000000..8f85b63
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_f01.c
@@ -0,0 +1,602 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $01 support for sensor
+ * control and configuration.
+ *
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/param.h>
+#include <linux/input/rmi_platformdata.h>
+
+#include "rmi.h"
+#include "rmi_drvr.h"
+#include "rmi_bus.h"
+#include "rmi_sensor.h"
+#include "rmi_function.h"
+#include "rmi_f01.h"
+
+/* Control register bits. */
+#define F01_CONFIGURED (1 << 7)
+#define NONSTANDARD_REPORT_RATE (1 << 6)
+
+/* Command register bits. */
+#define F01_RESET 1
+#define F01_SHUTDOWN (1 << 1)
+
+/* Data register 0 bits. */
+#define F01_UNCONFIGURED (1 << 7)
+#define F01_FLASH_PROGRAMMING_MODE (1 << 6)
+#define F01_STATUS_MASK 0x0F
+
+/** Context data for each F01 we find.
+ */
+struct f01_instance_data {
+ struct rmi_F01_control *controlRegisters;
+ struct rmi_F01_data *dataRegisters;
+ struct rmi_F01_query *query_registers;
+
+ bool nonstandard_report_rate;
+};
+
+static ssize_t rmi_fn_01_productinfo_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_01_productinfo_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(productinfo, 0444, rmi_fn_01_productinfo_show, rmi_fn_01_productinfo_store); /* RO attr */
+
+static ssize_t rmi_fn_01_productid_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_01_productid_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(productid, 0444, rmi_fn_01_productid_show, rmi_fn_01_productid_store); /* RO attr */
+
+static ssize_t rmi_fn_01_manufacturer_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_01_manufacturer_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(manufacturer, 0444, rmi_fn_01_manufacturer_show, rmi_fn_01_manufacturer_store); /* RO attr */
+
+static ssize_t rmi_fn_01_datecode_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_01_datecode_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(datecode, 0444, rmi_fn_01_datecode_show, rmi_fn_01_datecode_store); /* RO attr */
+
+static ssize_t rmi_fn_01_reportrate_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_01_reportrate_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(reportrate, 0644, rmi_fn_01_reportrate_show, rmi_fn_01_reportrate_store); /* RW attr */
+
+static ssize_t rmi_fn_01_reset_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_01_reset_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(reset, 0200, rmi_fn_01_reset_show, rmi_fn_01_reset_store); /* WO attr */
+
+static ssize_t rmi_fn_01_testerid_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_01_testerid_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(testerid, 0444, rmi_fn_01_testerid_show, rmi_fn_01_testerid_store); /* RO attr */
+
+static ssize_t rmi_fn_01_serialnumber_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_01_serialnumber_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(serialnumber, 0444, rmi_fn_01_serialnumber_show, rmi_fn_01_serialnumber_store); /* RO attr */
+
+static int set_report_rate(struct rmi_function_info *function_info, bool nonstandard)
+{
+ if (nonstandard) {
+ return rmi_set_bits(function_info->sensor, function_info->funcDescriptor.controlBaseAddr, NONSTANDARD_REPORT_RATE);
+ } else {
+ return rmi_set_bits(function_info->sensor, function_info->funcDescriptor.controlBaseAddr, NONSTANDARD_REPORT_RATE);
+ }
+}
+
+/*.
+ * The interrupt handler for Fn $01 doesn't do anything (for now).
+ */
+void FN_01_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int assertedIRQs)
+{
+ struct f01_instance_data *instanceData = (struct f01_instance_data *) rmifninfo->fndata;
+
+ printk(KERN_DEBUG "%s: Read device status.", __func__);
+
+ if (rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.dataBaseAddr,
+ &instanceData->dataRegisters->deviceStatus, 1)) {
+ printk(KERN_ERR "%s : Could not read F01 device status.\n",
+ __func__);
+ }
+ printk(KERN_INFO "%s: read device status register. Value 0x%02X.", __func__, instanceData->dataRegisters->deviceStatus);
+
+ if (instanceData->dataRegisters->deviceStatus & F01_UNCONFIGURED) {
+ printk(KERN_INFO "%s: ++++ Device reset detected.", __func__);
+ /* TODO: Handle device reset appropriately.
+ */
+ }
+}
+EXPORT_SYMBOL(FN_01_inthandler);
+
+/*
+ * This reads in the function $01 source data.
+ *
+ */
+void FN_01_attention(struct rmi_function_info *rmifninfo)
+{
+ struct f01_instance_data *instanceData = (struct f01_instance_data *) rmifninfo->fndata;
+
+ /* TODO: Compute size to read and number of IRQ registers to processors
+ * dynamically. See comments in rmi.h. */
+ if (rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.dataBaseAddr+1,
+ instanceData->dataRegisters->irqs, 1)) {
+ printk(KERN_ERR "%s : Could not read interrupt status registers at 0x%02x\n",
+ __func__, rmifninfo->funcDescriptor.dataBaseAddr);
+ return;
+ }
+
+ if (instanceData->dataRegisters->irqs[0] & instanceData->controlRegisters->interruptEnable[0]) {
+// printk(KERN_INFO "%s: ++++ IRQs == 0x%02X", __func__, instanceData->dataRegisters->irqs[0]);
+ /* call down to the sensors irq dispatcher to dispatch all enabled IRQs */
+ rmifninfo->sensor->dispatchIRQs(rmifninfo->sensor,
+ instanceData->dataRegisters->irqs[0]);
+ }
+
+}
+EXPORT_SYMBOL(FN_01_attention);
+
+int FN_01_config(struct rmi_function_info *rmifninfo)
+{
+ int retval = 0;
+ struct f01_instance_data *instance_data = rmifninfo->fndata;
+
+ printk(KERN_DEBUG "%s: RMI4 function $01 config\n", __func__);
+
+ /* First thing to do is set the configuration bit. We'll check this at
+ * the end to determine if the device has reset during the config process.
+ */
+ retval = rmi_set_bits(rmifninfo->sensor, rmifninfo->funcDescriptor.controlBaseAddr, F01_CONFIGURED);
+ if (retval)
+ printk(KERN_WARNING "%s: failed to set configured bit, errno = %d.",
+ __func__, retval);
+
+ /* At config time, the device is presumably in its default state, so we
+ * only need to write non-default configuration settings.
+ */
+ if (instance_data->nonstandard_report_rate) {
+ retval = set_report_rate(rmifninfo, true);
+ if (!retval)
+ printk(KERN_WARNING "%s: failed to configure report rate, errno = %d.",
+ __func__, retval);
+ }
+
+ /* TODO: Check for reset! */
+
+ return retval;
+}
+EXPORT_SYMBOL(FN_01_config);
+
+/* Initialize any function $01 specific params and settings - input
+ * settings, device settings, etc.
+ */
+int FN_01_init(struct rmi_function_device *function_device)
+{
+ int retval;
+ struct rmi_f01_functiondata *functiondata = rmi_sensor_get_functiondata(function_device->sensor, RMI_F01_INDEX);
+ struct f01_instance_data *instance_data = function_device->rfi->fndata;
+
+ pr_debug("%s: RMI4 function $01 init\n", __func__);
+
+ if (functiondata) {
+ instance_data->nonstandard_report_rate = functiondata->nonstandard_report_rate;
+ }
+
+ retval = device_create_file(&function_device->dev, &dev_attr_productinfo);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create productinfo.", __func__);
+ return retval;
+ }
+ retval = device_create_file(&function_device->dev, &dev_attr_productid);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create productid.", __func__);
+ return retval;
+ }
+ retval = device_create_file(&function_device->dev, &dev_attr_manufacturer);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create manufacturer.", __func__);
+ return retval;
+ }
+ retval = device_create_file(&function_device->dev, &dev_attr_datecode);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create datecode.", __func__);
+ return retval;
+ }
+ retval = device_create_file(&function_device->dev, &dev_attr_reportrate);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create reportrate.", __func__);
+ return retval;
+ }
+ retval = device_create_file(&function_device->dev, &dev_attr_reset);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create reset.", __func__);
+ return retval;
+ }
+ retval = device_create_file(&function_device->dev, &dev_attr_serialnumber);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create serialnumber.", __func__);
+ return retval;
+ }
+ retval = device_create_file(&function_device->dev, &dev_attr_testerid);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create testerid.", __func__);
+ return retval;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(FN_01_init);
+
+int FN_01_detect(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr, unsigned int interruptCount)
+{
+ int i;
+ int InterruptOffset;
+ int retval = 0;
+ struct f01_instance_data *instanceData = NULL;
+ struct rmi_F01_control *controlRegisters = NULL;
+ struct rmi_F01_data *dataRegisters = NULL;
+ struct rmi_F01_query *query_registers = NULL;
+ unsigned char query_buffer[21];
+
+ pr_debug("%s: RMI4 function $01 detect\n", __func__);
+
+ /* Store addresses - used elsewhere to read data,
+ * control, query, etc. */
+ rmifninfo->funcDescriptor.queryBaseAddr = fndescr->queryBaseAddr;
+ rmifninfo->funcDescriptor.commandBaseAddr = fndescr->commandBaseAddr;
+ rmifninfo->funcDescriptor.controlBaseAddr = fndescr->controlBaseAddr;
+ rmifninfo->funcDescriptor.dataBaseAddr = fndescr->dataBaseAddr;
+ rmifninfo->funcDescriptor.interruptSrcCnt = fndescr->interruptSrcCnt;
+ rmifninfo->funcDescriptor.functionNum = fndescr->functionNum;
+
+ rmifninfo->numSources = fndescr->interruptSrcCnt;
+
+ /* Set up context data. */
+ instanceData = kzalloc(sizeof(*instanceData), GFP_KERNEL);
+ if (!instanceData) {
+ printk(KERN_ERR "%s: Error allocating memory for F01 context data.\n", __func__);
+ retval = -ENOMEM;
+ goto error_exit;
+ }
+ query_registers = kzalloc(sizeof(*query_registers), GFP_KERNEL);
+ if (!query_registers) {
+ printk(KERN_ERR "%s: Error allocating memory for F01 query registers.\n", __func__);
+ retval = -ENOMEM;
+ goto error_exit;
+ }
+ instanceData->query_registers = query_registers;
+
+ /* Read the query info and unpack it. */
+ retval = rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.queryBaseAddr,
+ query_buffer, 21);
+ if (retval) {
+ printk(KERN_ERR "%s : Could not read F01 query registers at 0x%02x. Error %d.\n",
+ __func__, rmifninfo->funcDescriptor.queryBaseAddr, retval);
+ /* Presumably if the read fails, the buffer should be all zeros, so we're OK to continue. */
+ }
+ query_registers->mfgid = query_buffer[0];
+ query_registers->properties = query_buffer[1];
+ query_registers->prod_info[0] = query_buffer[2] & 0x7F;
+ query_registers->prod_info[1] = query_buffer[3] & 0x7F;
+ query_registers->date_code[0] = query_buffer[4] & 0x1F;
+ query_registers->date_code[1] = query_buffer[5] & 0x0F;
+ query_registers->date_code[2] = query_buffer[6] & 0x1F;
+ query_registers->tester_id = (((unsigned short) query_buffer[7] & 0x7F) << 7) | (query_buffer[8] & 0x7F);
+ query_registers->serial_num = (((unsigned short) query_buffer[9] & 0x7F) << 7) | (query_buffer[10] & 0x7F);
+ memcpy(query_registers->prod_id, &query_buffer[11], 10);
+
+ printk(KERN_DEBUG "%s: RMI4 Protocol Function $01 Query information, rmifninfo->funcDescriptor.queryBaseAddr = %d\n", __func__, rmifninfo->funcDescriptor.queryBaseAddr);
+ printk(KERN_DEBUG "%s: Manufacturer ID: %d %s\n", __func__,
+ query_registers->mfgid, query_registers->mfgid == 1 ? "(Synaptics)" : "");
+ printk(KERN_DEBUG "%s: Product Properties: 0x%x\n",
+ __func__, query_registers->properties);
+ printk(KERN_DEBUG "%s: Product Info: 0x%x 0x%x\n",
+ __func__, query_registers->prod_info[0], query_registers->prod_info[1]);
+ printk(KERN_DEBUG "%s: Date Code: Year : %d Month: %d Day: %d\n",
+ __func__, query_registers->date_code[0], query_registers->date_code[1],
+ query_registers->date_code[2]);
+ printk(KERN_DEBUG "%s: Tester ID: %d\n", __func__, query_registers->tester_id);
+ printk(KERN_DEBUG "%s: Serial Number: 0x%x\n",
+ __func__, query_registers->serial_num);
+ printk(KERN_DEBUG "%s: Product ID: %s\n", __func__, query_registers->prod_id);
+
+ /* TODO: size of control registers needs to be computed dynamically. See comment
+ * in rmi.h. */
+ controlRegisters = kzalloc(sizeof(*controlRegisters), GFP_KERNEL);
+ if (!controlRegisters) {
+ printk(KERN_ERR "%s: Error allocating memory for F01 control registers.\n", __func__);
+ retval = -ENOMEM;
+ goto error_exit;
+ }
+ instanceData->controlRegisters = controlRegisters;
+ retval = rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.controlBaseAddr,
+ (char *)instanceData->controlRegisters, sizeof(struct rmi_F01_control));
+ if (retval) {
+ printk(KERN_ERR "%s : Could not read F01 control registers at 0x%02x. Error %d.\n",
+ __func__, rmifninfo->funcDescriptor.controlBaseAddr, retval);
+ }
+
+ /* TODO: size of data registers needs to be computed dynamically. See comment
+ * in rmi.h. */
+ dataRegisters = kzalloc(sizeof(*dataRegisters), GFP_KERNEL);
+ if (!dataRegisters) {
+ printk(KERN_ERR "%s: Error allocating memory for F01 data registers.\n", __func__);
+ retval = -ENOMEM;
+ goto error_exit;
+ }
+ instanceData->dataRegisters = dataRegisters;
+ rmifninfo->fndata = instanceData;
+
+ /* Need to get interrupt info to be used later when handling
+ * interrupts. */
+ rmifninfo->interruptRegister = interruptCount/8;
+
+ /* loop through interrupts for each source and or in a bit
+ * to the interrupt mask for each. */
+ InterruptOffset = interruptCount % 8;
+
+ for (i = InterruptOffset;
+ i < ((fndescr->interruptSrcCnt & 0x7) + InterruptOffset);
+ i++) {
+ rmifninfo->interruptMask |= 1 << i;
+ }
+
+ return retval;
+
+error_exit:
+ kfree(instanceData);
+ kfree(query_registers);
+ kfree(controlRegisters);
+ kfree(dataRegisters);
+ return retval;
+}
+EXPORT_SYMBOL(FN_01_detect);
+
+static ssize_t rmi_fn_01_productinfo_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f01_instance_data *instance_data = (struct f01_instance_data *)fn->rfi->fndata;
+
+ if (instance_data && instance_data->query_registers && instance_data->query_registers->prod_info)
+ return sprintf(buf, "0x%02X 0x%02X\n", instance_data->query_registers->prod_info[0], instance_data->query_registers->prod_info[1]);
+
+ return sprintf(buf, "unknown");
+}
+
+static ssize_t rmi_fn_01_productinfo_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return -EPERM;
+}
+
+
+static ssize_t rmi_fn_01_productid_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f01_instance_data *instance_data = (struct f01_instance_data *)fn->rfi->fndata;
+
+ if (instance_data && instance_data->query_registers && instance_data->query_registers->prod_id)
+ return sprintf(buf, "%s\n", instance_data->query_registers->prod_id);
+
+ return sprintf(buf, "unknown");
+}
+
+static ssize_t rmi_fn_01_productid_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return -EPERM;
+}
+
+static ssize_t rmi_fn_01_manufacturer_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f01_instance_data *instance_data = (struct f01_instance_data *)fn->rfi->fndata;
+
+ if (instance_data && instance_data->query_registers)
+ return sprintf(buf, "0x%02X\n", instance_data->query_registers->mfgid);
+
+ return sprintf(buf, "unknown");
+}
+
+static ssize_t rmi_fn_01_manufacturer_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return -EPERM;
+}
+
+static ssize_t rmi_fn_01_datecode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f01_instance_data *instance_data = (struct f01_instance_data *)fn->rfi->fndata;
+
+ if (instance_data && instance_data->query_registers && instance_data->query_registers->date_code)
+ return sprintf(buf, "20%02u-%02u-%02u\n", instance_data->query_registers->date_code[0], instance_data->query_registers->date_code[1], instance_data->query_registers->date_code[2]);
+
+ return sprintf(buf, "unknown");
+}
+
+static ssize_t rmi_fn_01_datecode_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return -EPERM;
+}
+
+static ssize_t rmi_fn_01_reportrate_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f01_instance_data *instance_data = (struct f01_instance_data *)fn->rfi->fndata;
+
+ if (instance_data && instance_data->query_registers && instance_data->query_registers->date_code)
+ return sprintf(buf, "%d\n", instance_data->nonstandard_report_rate);
+
+ return sprintf(buf, "unknown");
+}
+
+static ssize_t rmi_fn_01_reportrate_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f01_instance_data *instance_data = (struct f01_instance_data *)fn->rfi->fndata;
+ unsigned int new_rate;
+ int retval;
+
+ printk(KERN_DEBUG "%s: Report rate set to %s", __func__, buf);
+
+ if (sscanf(buf, "%u", &new_rate) != 1)
+ return -EINVAL;
+ if (new_rate < 0 || new_rate > 1)
+ return -EINVAL;
+ instance_data->nonstandard_report_rate = new_rate;
+
+ retval = set_report_rate(fn->rfi, new_rate);
+ if (retval < 0) {
+ printk(KERN_ERR "%s: failed to set report rate bit, error = %d.", __func__, retval);
+ return retval;
+ }
+
+ return count;
+}
+
+static ssize_t rmi_fn_01_reset_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return -EPERM;
+}
+
+static ssize_t rmi_fn_01_reset_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ unsigned int reset;
+ int retval;
+
+ printk(KERN_INFO "%s: Reset written with %s", __func__, buf);
+
+ if (sscanf(buf, "%u", &reset) != 1)
+ return -EINVAL;
+ if (reset < 0 || reset > 1)
+ return -EINVAL;
+
+ /* Per spec, 0 has no effect, so we skip it entirely. */
+ if (reset) {
+ retval = rmi_set_bits(fn->sensor, fn->rfi->funcDescriptor.commandBaseAddr, F01_RESET);
+ if (retval < 0) {
+ printk(KERN_ERR "%s: failed to issue reset command, error = %d.", __func__, retval);
+ return retval;
+ }
+ }
+
+ return count;
+}
+
+static ssize_t rmi_fn_01_serialnumber_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f01_instance_data *instance_data = (struct f01_instance_data *)fn->rfi->fndata;
+
+ if (instance_data && instance_data->query_registers)
+ return sprintf(buf, "%u\n", instance_data->query_registers->serial_num);
+
+ return sprintf(buf, "unknown");
+}
+
+static ssize_t rmi_fn_01_serialnumber_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return -EPERM;
+}
+
+static ssize_t rmi_fn_01_testerid_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f01_instance_data *instance_data = (struct f01_instance_data *)fn->rfi->fndata;
+
+ if (instance_data && instance_data->query_registers)
+ return sprintf(buf, "%u\n", instance_data->query_registers->tester_id);
+
+ return sprintf(buf, "unknown");
+}
+
+static ssize_t rmi_fn_01_testerid_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return -EPERM;
+}
diff --git a/drivers/input/touchscreen/synaptics/rmi_f01.h b/drivers/input/touchscreen/synaptics/rmi_f01.h
new file mode 100644
index 0000000..976e062
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_f01.h
@@ -0,0 +1,40 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $01 header.
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ * There is only one function $01 for each RMI4 sensor. This will be
+ * the function that is used to set sensor control and configurations
+ * and check the interrupts to find the source function that is interrupting.
+ *
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+#ifndef _RMI_FUNCTION_01_H
+#define _RMI_FUNCTION_01_H
+
+void FN_01_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int assertedIRQs);
+int FN_01_config(struct rmi_function_info *rmifninfo);
+int FN_01_init(struct rmi_function_device *function_device);
+int FN_01_detect(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr,
+ unsigned int interruptCount);
+void FN_01_attention(struct rmi_function_info *rmifninfo);
+#endif
diff --git a/drivers/input/touchscreen/synaptics/rmi_f05.c b/drivers/input/touchscreen/synaptics/rmi_f05.c
new file mode 100644
index 0000000..0531364
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_f05.c
@@ -0,0 +1,136 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $11 support for 2D.
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/input/rmi_platformdata.h>
+
+#include "rmi.h"
+#include "rmi_drvr.h"
+#include "rmi_bus.h"
+#include "rmi_sensor.h"
+#include "rmi_function.h"
+#include "rmi_f05.h"
+
+struct f05_instance_data {
+ int dummy; /* TODO: Write this */
+};
+
+/*
+ * There is no attention function for F05 - it is left NULL
+ * in the function table so it is not called.
+ *
+ */
+
+
+/*
+ * This reads in a sample and reports the F05 source data to the
+ * input subsystem. It is used for both polling and interrupt driven
+ * operation. This is called a lot so don't put in any informational
+ * printks since they will slow things way down!
+ */
+void FN_05_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int assertedIRQs)
+{
+// struct f05_instance_data *instance_data = rmifninfo->fndata;
+}
+EXPORT_SYMBOL(FN_05_inthandler);
+
+int FN_05_config(struct rmi_function_info *rmifninfo)
+{
+ int retval = 0;
+
+ pr_debug("%s: RMI4 F05 config\n", __func__);
+
+ /* TODO: Perform configuration. In particular, write any cached control
+ * register values to the device. */
+
+ return retval;
+}
+EXPORT_SYMBOL(FN_05_config);
+
+/* Initialize any F05 specific params and settings - input
+ * settings, device settings, etc.
+ */
+int FN_05_init(struct rmi_function_device *function_device)
+{
+ int retval = 0;
+// struct f05_instance_data *instance_data = function_device->rfi->fndata;
+// struct rmi_f05_functiondata *functiondata = rmi_sensor_get_functiondata(function_device->sensor, RMI_F05_INDEX);
+
+ printk(KERN_DEBUG "%s: RMI4 F05 init\n", __func__);
+
+ return retval;
+}
+EXPORT_SYMBOL(FN_05_init);
+
+
+int FN_05_detect(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr, unsigned int interruptCount)
+{
+ int retval = 0;
+ int i;
+ struct f05_instance_data *instanceData;
+ int fn05InterruptOffset;
+
+ printk(KERN_DEBUG "%s: RMI4 F05 detect\n", __func__);
+
+ instanceData = kzalloc(sizeof(struct f05_instance_data), GFP_KERNEL);
+ if (!instanceData) {
+ printk(KERN_ERR "%s: Error allocating F05 instance data.\n", __func__);
+ return -ENOMEM;
+ }
+ rmifninfo->fndata = instanceData;
+
+ /* Store addresses - used elsewhere to read data,
+ * control, query, etc. */
+ rmifninfo->funcDescriptor.queryBaseAddr = fndescr->queryBaseAddr;
+ rmifninfo->funcDescriptor.commandBaseAddr = fndescr->commandBaseAddr;
+ rmifninfo->funcDescriptor.controlBaseAddr = fndescr->controlBaseAddr;
+ rmifninfo->funcDescriptor.dataBaseAddr = fndescr->dataBaseAddr;
+ rmifninfo->funcDescriptor.interruptSrcCnt = fndescr->interruptSrcCnt;
+ rmifninfo->funcDescriptor.functionNum = fndescr->functionNum;
+
+ rmifninfo->numSources = fndescr->interruptSrcCnt;
+ /* Need to get interrupt info to be used later when handling
+ interrupts. */
+ rmifninfo->interruptRegister = interruptCount/8;
+
+ /* loop through interrupts for each source in fn $11 and or in a bit
+ to the interrupt mask for each. */
+ fn05InterruptOffset = interruptCount % 8;
+
+ for (i = fn05InterruptOffset;
+ i < ((fndescr->interruptSrcCnt & 0x7) + fn05InterruptOffset);
+ i++)
+ rmifninfo->interruptMask |= 1 << i;
+
+ return retval;
+}
+EXPORT_SYMBOL(FN_05_detect);
diff --git a/drivers/input/touchscreen/synaptics/rmi_f05.h b/drivers/input/touchscreen/synaptics/rmi_f05.h
new file mode 100644
index 0000000..b820e71
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_f05.h
@@ -0,0 +1,43 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $11 header.
+ * Copyright (c) 2007 - 2010, Synaptics Incorporated
+ *
+ * For every RMI4 function that has a data source - like 2D sensors,
+ * buttons, LEDs, GPIOs, etc. - the user will create a new rmi_function_xx.c
+ * file and add these functions to perform the config(), init(), report()
+ * and detect() functionality. The function pointers are then srored under
+ * the RMI function info and these functions will automatically be called by
+ * the global config(), init(), report() and detect() functions that will
+ * loop through all data sources and call the data sources functions using
+ * these functions pointed to by the function ptrs.
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+#ifndef _RMI_FUNCTION_05_H
+#define _RMI_FUNCTION_05_H
+
+void FN_05_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int assertedIRQs);
+int FN_05_config(struct rmi_function_info *rmifninfo);
+int FN_05_init(struct rmi_function_device *function_device);
+int FN_05_detect(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr,
+ unsigned int interruptCount);
+/* No attention function for F05 */
+#endif
diff --git a/drivers/input/touchscreen/synaptics/rmi_f11.c b/drivers/input/touchscreen/synaptics/rmi_f11.c
new file mode 100644
index 0000000..9a23776
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_f11.c
@@ -0,0 +1,928 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $11 support for 2D.
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/input/rmi_platformdata.h>
+
+#include "rmi.h"
+#include "rmi_drvr.h"
+#include "rmi_bus.h"
+#include "rmi_sensor.h"
+#include "rmi_function.h"
+#include "rmi_f11.h"
+
+static int sensorMaxX;
+static int sensorMaxY;
+
+struct f11_instance_data {
+ struct rmi_F11_device_query *deviceInfo;
+ struct rmi_F11_sensor_query *sensorInfo;
+ struct rmi_F11_control *controlRegisters;
+ int button_height;
+ unsigned char fingerDataBufferSize;
+ unsigned char absDataOffset;
+ unsigned char absDataSize;
+ unsigned char relDataOffset;
+ unsigned char gestureDataOffset;
+ unsigned char *fingerDataBuffer;
+ /* Last X & Y seen, needed at finger lift. Was down indicates at least one finger was here. */
+ /* TODO: Eventually we'll need to track this info on a per finger basis. */
+ bool wasdown;
+ unsigned int oldX;
+ unsigned int oldY;
+ /* Transformations to be applied to coordinates before reporting. */
+ bool flipX;
+ bool flipY;
+ int offsetX;
+ int offsetY;
+ int clipXLow;
+ int clipXHigh;
+ int clipYLow;
+ int clipYHigh;
+ bool swap_axes;
+ bool relReport;
+};
+
+enum f11_finger_state {
+ F11_NO_FINGER = 0,
+ F11_PRESENT = 1,
+ F11_INACCURATE = 2,
+ F11_RESERVED = 3
+};
+
+static ssize_t rmi_fn_11_flip_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_11_flip_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(flip, 0664, rmi_fn_11_flip_show, rmi_fn_11_flip_store); /* RW attr */
+
+static ssize_t rmi_fn_11_clip_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_11_clip_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(clip, 0664, rmi_fn_11_clip_show, rmi_fn_11_clip_store); /* RW attr */
+
+static ssize_t rmi_fn_11_offset_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_11_offset_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(offset, 0664, rmi_fn_11_offset_show, rmi_fn_11_offset_store); /* RW attr */
+
+static ssize_t rmi_fn_11_swap_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_11_swap_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(swap, 0664, rmi_fn_11_swap_show, rmi_fn_11_swap_store); /* RW attr */
+
+static ssize_t rmi_fn_11_relreport_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_11_relreport_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(relreport, 0664, rmi_fn_11_relreport_show, rmi_fn_11_relreport_store); /* RW attr */
+
+static ssize_t rmi_fn_11_maxPos_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_11_maxPos_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(maxPos, 0664, rmi_fn_11_maxPos_show, rmi_fn_11_maxPos_store); /* RW attr */
+
+
+static void FN_11_relreport(struct rmi_function_info *rmifninfo);
+
+/*
+ * There is no attention function for Fn $11 - it is left NULL
+ * in the function table so it is not called.
+ *
+ */
+
+
+/*
+ * This reads in a sample and reports the function $11 source data to the
+ * input subsystem. It is used for both polling and interrupt driven
+ * operation. This is called a lot so don't put in any informational
+ * printks since they will slow things way down!
+ */
+void FN_11_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int assertedIRQs)
+{
+ /* number of touch points - fingers down in this case */
+ int fingerDownCount;
+ int finger;
+ struct rmi_function_device *function_device;
+ struct f11_instance_data *instanceData;
+
+ instanceData = (struct f11_instance_data *) rmifninfo->fndata;
+
+ fingerDownCount = 0;
+ function_device = rmifninfo->function_device;
+
+ /* get 2D sensor finger data */
+
+ if (rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.dataBaseAddr,
+ instanceData->fingerDataBuffer, instanceData->fingerDataBufferSize)) {
+ printk(KERN_ERR "%s: Failed to read finger data registers.\n", __func__);
+ return;
+ }
+
+ /* First we need to count the fingers and generate some events related to that. */
+ for (finger = 0; finger < instanceData->sensorInfo->numberOfFingers; finger++) {
+ int reg;
+ int fingerShift;
+ int fingerStatus;
+
+ /* determine which data byte the finger status is in */
+ reg = finger/4;
+ /* bit shift to get finger's status */
+ fingerShift = (finger % 4) * 2;
+ fingerStatus = (instanceData->fingerDataBuffer[reg] >> fingerShift) & 3;
+
+ if (fingerStatus == F11_PRESENT || fingerStatus == F11_INACCURATE) {
+ fingerDownCount++;
+ instanceData->wasdown = true;
+ }
+ }
+ input_report_key(function_device->input,
+ BTN_TOUCH, fingerDownCount);
+ for (finger = 0; finger < (instanceData->sensorInfo->numberOfFingers - 1); finger++) {
+ input_report_key(function_device->input,
+ BTN_2 + finger, fingerDownCount >= (finger + 2));
+ }
+
+ for (finger = 0; finger < instanceData->sensorInfo->numberOfFingers; finger++) {
+ int reg;
+ int fingerShift;
+ int fingerStatus;
+ int X = 0, Y = 0, Z = 0, Wy = 0, Wx = 0;
+
+ /* determine which data byte the finger status is in */
+ reg = finger/4;
+ /* bit shift to get finger's status */
+ fingerShift = (finger % 4) * 2;
+ fingerStatus = (instanceData->fingerDataBuffer[reg] >> fingerShift) & 3;
+
+ /* if finger status indicates a finger is present then
+ read the finger data and report it */
+ if (fingerStatus == F11_PRESENT || fingerStatus == F11_INACCURATE) {
+
+ if (instanceData->sensorInfo->hasAbs) {
+ int maxX = instanceData->controlRegisters->sensorMaxXPos;
+ int maxY = instanceData->controlRegisters->sensorMaxYPos;
+ reg = instanceData->absDataOffset + (finger * instanceData->absDataSize);
+ X = (instanceData->fingerDataBuffer[reg] << 4) & 0x0ff0;
+ X |= (instanceData->fingerDataBuffer[reg+2] & 0x0f);
+ Y = (instanceData->fingerDataBuffer[reg+1] << 4) & 0x0ff0;
+ Y |= ((instanceData->fingerDataBuffer[reg+2] & 0xf0) >> 4) & 0x0f;
+ /* First thing to do is swap axes if needed.
+ */
+ if (instanceData->swap_axes) {
+ int temp = X;
+ X = Y;
+ Y = temp;
+ maxX = instanceData->controlRegisters->sensorMaxYPos;
+ maxY = instanceData->controlRegisters->sensorMaxXPos;
+ }
+ if (instanceData->flipX)
+ X = max(maxX-X, 0);
+ X = X - instanceData->offsetX;
+ X = min(max(X, instanceData->clipXLow), instanceData->clipXHigh);
+ if (instanceData->flipY)
+ Y = max(maxY-Y, 0);
+ Y = Y - instanceData->offsetY;
+ Y = min(max(Y, instanceData->clipYLow), instanceData->clipYHigh);
+
+ /* upper 4 bits of W are Wy,
+ lower 4 of W are Wx */
+ Wy = (instanceData->fingerDataBuffer[reg+3] >> 4) & 0x0f;
+ Wx = instanceData->fingerDataBuffer[reg+3] & 0x0f;
+ if (instanceData->swap_axes) {
+ int temp = Wx;
+ Wx = Wy;
+ Wy = temp;
+ }
+
+ Z = instanceData->fingerDataBuffer[reg+4];
+
+ /* if this is the first finger report normal
+ ABS_X, ABS_Y, PRESSURE, TOOL_WIDTH events for
+ non-MT apps. Apps that support Multi-touch
+ will ignore these events and use the MT events.
+ Apps that don't support Multi-touch will still
+ function.
+ */
+ if (fingerDownCount == 1) {
+ instanceData->oldX = X;
+ instanceData->oldY = Y;
+ input_report_abs(function_device->input, ABS_X, X);
+ input_report_abs(function_device->input, ABS_Y, Y);
+ input_report_abs(function_device->input, ABS_PRESSURE, Z);
+ input_report_abs(function_device->input, ABS_TOOL_WIDTH,
+ max(Wx, Wy));
+
+ } else {
+ /* TODO generate non MT events for multifinger situation. */
+ }
+#ifdef CONFIG_SYNA_MULTI_TOUCH
+ /* Report Multi-Touch events for each finger */
+ /* major axis of touch area ellipse */
+ input_report_abs(function_device->input, ABS_MT_TOUCH_MAJOR, Z);
+ /* minor axis of touch area ellipse */
+ input_report_abs(function_device->input, ABS_MT_WIDTH_MAJOR,
+ max(Wx, Wy));
+ /* Currently only 2 supported - 1 or 0 */
+ input_report_abs(function_device->input, ABS_MT_ORIENTATION,
+ (Wx > Wy ? 1 : 0));
+ input_report_abs(function_device->input, ABS_MT_POSITION_X, X);
+ input_report_abs(function_device->input, ABS_MT_POSITION_Y, Y);
+
+ /* TODO: Tracking ID needs to be reported but not used yet. */
+ /* Could be formed by keeping an id per position and assiging */
+ /* a new id when fingerStatus changes for that position.*/
+ input_report_abs(function_device->input, ABS_MT_TRACKING_ID,
+ finger+1);
+ /* MT sync between fingers */
+ input_mt_sync(function_device->input);
+#endif
+ }
+ }
+ }
+
+ /* if we had a finger down before and now we don't have any send a button up. */
+ if ((fingerDownCount == 0) && instanceData->wasdown) {
+ instanceData->wasdown = false;
+
+#ifdef CONFIG_SYNA_MULTI_TOUCH
+ input_report_abs(function_device->input, ABS_MT_TOUCH_MAJOR, 0);
+ input_report_abs(function_device->input, ABS_MT_WIDTH_MAJOR, 0);
+ input_report_abs(function_device->input, ABS_MT_POSITION_X, instanceData->oldX);
+ input_report_abs(function_device->input, ABS_MT_POSITION_Y, instanceData->oldY);
+ input_report_abs(function_device->input, ABS_MT_TRACKING_ID, 1);
+ input_mt_sync(function_device->input);
+#endif
+
+ input_report_abs(function_device->input, ABS_X, instanceData->oldX);
+ input_report_abs(function_device->input, ABS_Y, instanceData->oldY);
+ instanceData->oldX = instanceData->oldY = 0;
+ }
+
+ FN_11_relreport(rmifninfo);
+ input_sync(function_device->input); /* sync after groups of events */
+
+}
+EXPORT_SYMBOL(FN_11_inthandler);
+
+/* This function reads in relative data for first finger and send to input system */
+static void FN_11_relreport(struct rmi_function_info *rmifninfo)
+{
+ struct f11_instance_data *instanceData;
+ struct rmi_function_device *function_device;
+ signed char X, Y;
+ unsigned short fn11DataBaseAddr;
+
+ instanceData = (struct f11_instance_data *) rmifninfo->fndata;
+
+ if (instanceData->sensorInfo->hasRel && instanceData->relReport) {
+ int reg = instanceData->relDataOffset;
+
+ function_device = rmifninfo->function_device;
+
+ fn11DataBaseAddr = rmifninfo->funcDescriptor.dataBaseAddr;
+ /* Read and report Rel data for primary finger one register for X and one for Y*/
+ X = instanceData->fingerDataBuffer[reg];
+ Y = instanceData->fingerDataBuffer[reg+1];
+ if (instanceData->swap_axes) {
+ signed char temp = X;
+ X = Y;
+ Y = temp;
+ }
+ if (instanceData->flipX) {
+ X = -X;
+ }
+ if (instanceData->flipY) {
+ Y = -Y;
+ }
+ X = (signed char) min(127, max(-128, (int) X));
+ Y = (signed char) min(127, max(-128, (int) Y));
+
+ input_report_rel(function_device->input, REL_X, X);
+ input_report_rel(function_device->input, REL_Y, Y);
+ }
+}
+
+int FN_11_config(struct rmi_function_info *rmifninfo)
+{
+ /* For the data source - print info and do any
+ source specific configuration. */
+ unsigned char data[14];
+ int retval = 0;
+
+ pr_debug("%s: RMI4 function $11 config\n", __func__);
+
+ /* Get and print some info about the data source... */
+
+ /* To Query 2D devices we need to read from the address obtained
+ * from the function descriptor stored in the RMI function info.
+ */
+ retval = rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.queryBaseAddr,
+ data, 9);
+ if (retval) {
+ printk(KERN_ERR "%s: RMI4 function $11 config:"
+ "Could not read function query registers 0x%x\n",
+ __func__, rmifninfo->funcDescriptor.queryBaseAddr);
+ } else {
+ pr_debug("%s: Number of Fingers: %d\n",
+ __func__, data[1] & 7);
+ pr_debug("%s: Is Configurable: %d\n",
+ __func__, data[1] & (1 << 7) ? 1 : 0);
+ pr_debug("%s: Has Gestures: %d\n",
+ __func__, data[1] & (1 << 5) ? 1 : 0);
+ pr_debug("%s: Has Absolute: %d\n",
+ __func__, data[1] & (1 << 4) ? 1 : 0);
+ pr_debug("%s: Has Relative: %d\n",
+ __func__, data[1] & (1 << 3) ? 1 : 0);
+
+ pr_debug("%s: Number X Electrodes: %d\n",
+ __func__, data[2] & 0x1f);
+ pr_debug("%s: Number Y Electrodes: %d\n",
+ __func__, data[3] & 0x1f);
+ pr_debug("%s: Maximum Electrodes: %d\n",
+ __func__, data[4] & 0x1f);
+
+ pr_debug("%s: Absolute Data Size: %d\n",
+ __func__, data[5] & 3);
+
+ pr_debug("%s: Has XY Dist: %d\n",
+ __func__, data[7] & (1 << 7) ? 1 : 0);
+ pr_debug("%s: Has Pinch: %d\n",
+ __func__, data[7] & (1 << 6) ? 1 : 0);
+ pr_debug("%s: Has Press: %d\n",
+ __func__, data[7] & (1 << 5) ? 1 : 0);
+ pr_debug("%s: Has Flick: %d\n",
+ __func__, data[7] & (1 << 4) ? 1 : 0);
+ pr_debug("%s: Has Early Tap: %d\n",
+ __func__, data[7] & (1 << 3) ? 1 : 0);
+ pr_debug("%s: Has Double Tap: %d\n",
+ __func__, data[7] & (1 << 2) ? 1 : 0);
+ pr_debug("%s: Has Tap and Hold: %d\n",
+ __func__, data[7] & (1 << 1) ? 1 : 0);
+ pr_debug("%s: Has Tap: %d\n",
+ __func__, data[7] & 1 ? 1 : 0);
+ pr_debug("%s: Has Palm Detect: %d\n",
+ __func__, data[8] & 1 ? 1 : 0);
+ pr_debug("%s: Has Rotate: %d\n",
+ __func__, data[8] & (1 << 1) ? 1 : 0);
+
+ retval = rmi_read_multiple(rmifninfo->sensor,
+ rmifninfo->funcDescriptor.controlBaseAddr, data, 14);
+ if (retval) {
+ printk(KERN_ERR "%s: RMI4 function $11 config:"
+ "Could not read control registers 0x%x\n",
+ __func__, rmifninfo->funcDescriptor.controlBaseAddr);
+ return retval;
+ }
+
+ /* Store these for use later...*/
+ sensorMaxX = ((data[6] & 0x1f) << 8) | ((data[7] & 0xff) << 0);
+ sensorMaxY = ((data[8] & 0x1f) << 8) | ((data[9] & 0xff) << 0);
+
+ pr_debug("%s: Sensor Max X: %d\n", __func__, sensorMaxX);
+ pr_debug("%s: Sensor Max Y: %d\n", __func__, sensorMaxY);
+ }
+
+ return retval;
+}
+EXPORT_SYMBOL(FN_11_config);
+
+/* This operation is done in a number of places, so we have a handy routine
+ * for it.
+ */
+static void f11_set_abs_params(struct rmi_function_device *function_device)
+{
+ struct f11_instance_data *instance_data = function_device->rfi->fndata;
+ /* Use the max X and max Y read from the device, or the clip values,
+ * whichever is stricter.
+ */
+ int xMin = instance_data->clipXLow;
+ int xMax = min((int) instance_data->controlRegisters->sensorMaxXPos, instance_data->clipXHigh);
+ int yMin = instance_data->clipYLow;
+ int yMax = min((int) instance_data->controlRegisters->sensorMaxYPos, instance_data->clipYHigh) - instance_data->button_height;
+ if (instance_data->swap_axes) {
+ int temp = xMin;
+ xMin = yMin;
+ yMin = temp;
+ temp = xMax;
+ xMax = yMax;
+ yMax = temp;
+ }
+ printk(KERN_DEBUG "%s: Set ranges X=[%d..%d] Y=[%d..%d].", __func__, xMin, xMax, yMin, yMax);
+ input_set_abs_params(function_device->input, ABS_X, xMin, xMax,
+ 0, 0);
+ input_set_abs_params(function_device->input, ABS_Y, yMin, yMax,
+ 0, 0);
+ input_set_abs_params(function_device->input, ABS_PRESSURE, 0, 255, 0, 0);
+ input_set_abs_params(function_device->input, ABS_TOOL_WIDTH, 0, 15, 0, 0);
+
+#ifdef CONFIG_SYNA_MULTI_TOUCH
+ input_set_abs_params(function_device->input, ABS_MT_TOUCH_MAJOR, 0, 15, 0, 0);
+ input_set_abs_params(function_device->input, ABS_MT_TOUCH_MINOR, 0, 15, 0, 0);
+ input_set_abs_params(function_device->input, ABS_MT_ORIENTATION, 0, 1, 0, 0);
+ input_set_abs_params(function_device->input, ABS_MT_TRACKING_ID, 1, 10, 0, 0);
+ input_set_abs_params(function_device->input, ABS_MT_POSITION_X, xMin, xMax,
+ 0, 0);
+ input_set_abs_params(function_device->input, ABS_MT_POSITION_Y, yMin, yMax,
+ 0, 0);
+#endif
+}
+
+/* Initialize any function $11 specific params and settings - input
+ * settings, device settings, etc.
+ */
+int FN_11_init(struct rmi_function_device *function_device)
+{
+ struct f11_instance_data *instanceData = function_device->rfi->fndata;
+ int retval = 0;
+ struct rmi_f11_functiondata *functiondata = rmi_sensor_get_functiondata(function_device->sensor, RMI_F11_INDEX);
+ printk(KERN_DEBUG "%s: RMI4 F11 init", __func__);
+
+ /* TODO: Initialize these through some normal kernel mechanism.
+ */
+ instanceData->flipX = false;
+ instanceData->flipY = false;
+ instanceData->swap_axes = false;
+ instanceData->relReport = true;
+ instanceData->offsetX = instanceData->offsetY = 0;
+ instanceData->clipXLow = instanceData->clipYLow = 0;
+ /* TODO: 65536 should actually be the largest valid RMI4 position coordinate */
+ instanceData->clipXHigh = instanceData->clipYHigh = 65536;
+
+ /* Load any overrides that were specified via platform data.
+ */
+ if (functiondata) {
+ printk(KERN_DEBUG "%s: found F11 per function platformdata.", __func__);
+ instanceData->flipX = functiondata->flipX;
+ instanceData->flipY = functiondata->flipY;
+ instanceData->button_height = functiondata->button_height;
+ instanceData->swap_axes = functiondata->swap_axes;
+ if (functiondata->offset) {
+ instanceData->offsetX = functiondata->offset->x;
+ instanceData->offsetY = functiondata->offset->y;
+ }
+ if (functiondata->clipX) {
+ if (functiondata->clipX->min >= functiondata->clipX->max) {
+ printk(KERN_WARNING "%s: Clip X min (%d) >= X clip max (%d) - ignored.",
+ __func__, functiondata->clipX->min, functiondata->clipX->max);
+ } else {
+ instanceData->clipXLow = functiondata->clipX->min;
+ instanceData->clipXHigh = functiondata->clipX->max;
+ }
+ }
+ if (functiondata->clipY) {
+ if (functiondata->clipY->min >= functiondata->clipY->max) {
+ printk(KERN_WARNING "%s: Clip Y min (%d) >= Y clip max (%d) - ignored.",
+ __func__, functiondata->clipY->min, functiondata->clipY->max);
+ } else {
+ instanceData->clipYLow = functiondata->clipY->min;
+ instanceData->clipYHigh = functiondata->clipY->max;
+ }
+ }
+ }
+
+ /* need to init the input abs params for the 2D */
+ set_bit(EV_ABS, function_device->input->evbit);
+ set_bit(EV_SYN, function_device->input->evbit);
+ set_bit(EV_KEY, function_device->input->evbit);
+ set_bit(BTN_MISC, function_device->input->keybit);
+ set_bit(KEY_OK, function_device->input->keybit);
+
+ f11_set_abs_params(function_device);
+
+ printk(KERN_DEBUG "%s: Creating sysfs files.", __func__);
+ retval = device_create_file(&function_device->dev, &dev_attr_flip);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create flip.", __func__);
+ return retval;
+ }
+ retval = device_create_file(&function_device->dev, &dev_attr_clip);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create clip.", __func__);
+ return retval;
+ }
+ retval = device_create_file(&function_device->dev, &dev_attr_offset);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create offset.", __func__);
+ return retval;
+ }
+ retval = device_create_file(&function_device->dev, &dev_attr_swap);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create swap.", __func__);
+ return retval;
+ }
+ retval = device_create_file(&function_device->dev, &dev_attr_relreport);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create relreport.", __func__);
+ return retval;
+ }
+ retval = device_create_file(&function_device->dev, &dev_attr_maxPos);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create maxPos.", __func__);
+ return retval;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(FN_11_init);
+
+int FN_11_detect(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr, unsigned int interruptCount)
+{
+ unsigned char fn11Queries[12]; /* TODO: Compute size correctly. */
+ unsigned char fn11Control[12]; /* TODO: Compute size correctly. */
+ int i;
+ unsigned short fn11InterruptOffset;
+ unsigned char fn11AbsDataBlockSize;
+ int fn11HasPinch, fn11HasFlick, fn11HasTap;
+ int fn11HasTapAndHold, fn11HasDoubleTap;
+ int fn11HasEarlyTap, fn11HasPress;
+ int fn11HasPalmDetect, fn11HasRotate;
+ int fn11HasRel;
+ unsigned char f11_egr_0, f11_egr_1;
+ unsigned int fn11AllDataBlockSize;
+ int retval = 0;
+ struct f11_instance_data *instanceData;
+
+ printk(KERN_DEBUG "%s: RMI4 F11 detect\n", __func__);
+
+ instanceData = kzalloc(sizeof(struct f11_instance_data), GFP_KERNEL);
+ if (!instanceData) {
+ printk(KERN_ERR "%s: Error allocating F11 instance data.\n", __func__);
+ return -ENOMEM;
+ }
+ instanceData->deviceInfo = kzalloc(sizeof(struct rmi_F11_device_query), GFP_KERNEL);
+ if (!instanceData->deviceInfo) {
+ printk(KERN_ERR "%s: Error allocating F11 device query.\n", __func__);
+ return -ENOMEM;
+ }
+ instanceData->sensorInfo = kzalloc(sizeof(struct rmi_F11_sensor_query), GFP_KERNEL);
+ if (!instanceData->sensorInfo) {
+ printk(KERN_ERR "%s: Error allocating F11 sensor query.\n", __func__);
+ return -ENOMEM;
+ }
+ rmifninfo->fndata = instanceData;
+
+ /* Store addresses - used elsewhere to read data,
+ * control, query, etc. */
+ rmifninfo->funcDescriptor.queryBaseAddr = fndescr->queryBaseAddr;
+ rmifninfo->funcDescriptor.commandBaseAddr = fndescr->commandBaseAddr;
+ rmifninfo->funcDescriptor.controlBaseAddr = fndescr->controlBaseAddr;
+ rmifninfo->funcDescriptor.dataBaseAddr = fndescr->dataBaseAddr;
+ rmifninfo->funcDescriptor.interruptSrcCnt = fndescr->interruptSrcCnt;
+ rmifninfo->funcDescriptor.functionNum = fndescr->functionNum;
+
+ rmifninfo->numSources = fndescr->interruptSrcCnt;
+
+ /* need to get number of fingers supported, data size, etc. -
+ to be used when getting data since the number of registers to
+ read depends on the number of fingers supported and data size. */
+ retval = rmi_read_multiple(rmifninfo->sensor, fndescr->queryBaseAddr, fn11Queries,
+ sizeof(fn11Queries));
+ if (retval) {
+ printk(KERN_ERR "%s: RMI4 function $11 detect: "
+ "Could not read function query registers 0x%x\n",
+ __func__, rmifninfo->funcDescriptor.queryBaseAddr);
+ return retval;
+ }
+
+ /* Extract device data. */
+ instanceData->deviceInfo->hasQuery9 = (fn11Queries[0] & 0x04) != 0;
+ instanceData->deviceInfo->numberOfSensors = (fn11Queries[0] & 0x07) + 1;
+ printk(KERN_DEBUG "%s: F11 device - %d sensors. Query 9? %d.", __func__, instanceData->deviceInfo->numberOfSensors, instanceData->deviceInfo->hasQuery9);
+
+ /* Extract sensor data. */
+ /* 2D data sources have only 3 bits for the number of fingers
+ supported - so the encoding is a bit wierd. */
+ instanceData->sensorInfo->numberOfFingers = 2; /* default number of fingers supported */
+ if ((fn11Queries[1] & 0x7) <= 4)
+ /* add 1 since zero based */
+ instanceData->sensorInfo->numberOfFingers = (fn11Queries[1] & 0x7) + 1;
+ else {
+ /* a value of 5 is up to 10 fingers - 6 and 7 are reserved
+ (shouldn't get these i int retval;n a normal 2D source). */
+ if ((fn11Queries[1] & 0x7) == 5)
+ instanceData->sensorInfo->numberOfFingers = 10;
+ }
+ instanceData->sensorInfo->configurable = (fn11Queries[1] & 0x80) != 0;
+ instanceData->sensorInfo->hasSensitivityAdjust = (fn11Queries[1] & 0x40) != 0;
+ instanceData->sensorInfo->hasGestures = (fn11Queries[1] & 0x20) != 0;
+ instanceData->sensorInfo->hasAbs = (fn11Queries[1] & 0x10) != 0;
+ instanceData->sensorInfo->hasRel = (fn11Queries[1] & 0x08) != 0;
+ instanceData->sensorInfo->absDataSize = fn11Queries[5] & 0x03;
+ printk(KERN_DEBUG "%s: Number of fingers: %d.", __func__, instanceData->sensorInfo->numberOfFingers);
+
+ /* Need to get interrupt info to be used later when handling
+ interrupts. */
+ rmifninfo->interruptRegister = interruptCount/8;
+
+ /* loop through interrupts for each source in fn $11 and or in a bit
+ to the interrupt mask for each. */
+ fn11InterruptOffset = interruptCount % 8;
+
+ for (i = fn11InterruptOffset;
+ i < ((fndescr->interruptSrcCnt & 0x7) + fn11InterruptOffset);
+ i++)
+ rmifninfo->interruptMask |= 1 << i;
+
+ /* Figure out just how much data we'll need to read. */
+ instanceData->fingerDataBufferSize = (instanceData->sensorInfo->numberOfFingers + 3) / 4;
+ /* One each for X and Y, one for LSB for X & Y, one for W, one for Z */
+ fn11AbsDataBlockSize = 5;
+ if (instanceData->sensorInfo->absDataSize != 0)
+ printk(KERN_WARNING "%s: Unrecognized abs data size %d ignored.", __func__, instanceData->sensorInfo->absDataSize);
+ if (instanceData->sensorInfo->hasAbs) {
+ instanceData->absDataSize = fn11AbsDataBlockSize;
+ instanceData->absDataOffset = instanceData->fingerDataBufferSize;
+ instanceData->fingerDataBufferSize += instanceData->sensorInfo->numberOfFingers * fn11AbsDataBlockSize;
+ }
+ if (instanceData->sensorInfo->hasRel) {
+ instanceData->relDataOffset = ((instanceData->sensorInfo->numberOfFingers + 3) / 4) +
+ /* absolute data, per finger times number of fingers */
+ (fn11AbsDataBlockSize * instanceData->sensorInfo->numberOfFingers);
+ instanceData->fingerDataBufferSize += instanceData->sensorInfo->numberOfFingers * 2;
+ }
+ if (instanceData->sensorInfo->hasGestures) {
+ instanceData->gestureDataOffset = instanceData->fingerDataBufferSize;
+ printk(KERN_WARNING "%s: WARNING Need to correctly compute gesture data location.", __func__);
+ }
+
+ /* need to determine the size of data to read - this depends on
+ conditions such as whether Relative data is reported and if Gesture
+ data is reported. */
+ f11_egr_0 = fn11Queries[7];
+ f11_egr_1 = fn11Queries[8];
+
+ /* Get info about what EGR data is supported, whether it has
+ Relative data supported, etc. */
+ fn11HasPinch = f11_egr_0 & 0x40;
+ fn11HasFlick = f11_egr_0 & 0x10;
+ fn11HasTap = f11_egr_0 & 0x01;
+ fn11HasTapAndHold = f11_egr_0 & 0x02;
+ fn11HasDoubleTap = f11_egr_0 & 0x04;
+ fn11HasEarlyTap = f11_egr_0 & 0x08;
+ fn11HasPress = f11_egr_0 & 0x20;
+ fn11HasPalmDetect = f11_egr_1 & 0x01;
+ fn11HasRotate = f11_egr_1 & 0x02;
+ fn11HasRel = fn11Queries[1] & 0x08;
+
+ /* Size of all data including finger status, absolute data for each
+ finger, relative data and EGR data */
+ fn11AllDataBlockSize =
+ /* finger status, four fingers per register */
+ ((instanceData->sensorInfo->numberOfFingers + 3) / 4) +
+ /* absolute data, per finger times number of fingers */
+ (fn11AbsDataBlockSize * instanceData->sensorInfo->numberOfFingers) +
+ /* two relative registers (if relative is being reported) */
+ 2 * fn11HasRel +
+ /* F11_2D_Data8 is only present if the egr_0
+ register is non-zero. */
+ !!(f11_egr_0) +
+ /* F11_2D_Data9 is only present if either egr_0 or
+ egr_1 registers are non-zero. */
+ (f11_egr_0 || f11_egr_1) +
+ /* F11_2D_Data10 is only present if EGR_PINCH or EGR_FLICK of
+ egr_0 reports as 1. */
+ !!(fn11HasPinch | fn11HasFlick) +
+ /* F11_2D_Data11 and F11_2D_Data12 are only present if
+ EGR_FLICK of egr_0 reports as 1. */
+ 2 * !!(fn11HasFlick);
+ instanceData->fingerDataBuffer = kcalloc(instanceData->fingerDataBufferSize, sizeof(unsigned char), GFP_KERNEL);
+ if (!instanceData->fingerDataBuffer) {
+ printk(KERN_ERR "%s: Failed to allocate finger data buffer.", __func__);
+ return -ENOMEM;
+ }
+
+ /* Grab a copy of the control registers. */
+ instanceData->controlRegisters = kzalloc(sizeof(struct rmi_F11_control), GFP_KERNEL);
+ if (!instanceData->controlRegisters) {
+ printk(KERN_ERR "%s: Error allocating F11 control registers.\n", __func__);
+ return -ENOMEM;
+ }
+ retval = rmi_read_multiple(rmifninfo->sensor, fndescr->controlBaseAddr,
+ fn11Control, sizeof(fn11Control));
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to read F11 control registers.", __func__);
+ return retval;
+ }
+ instanceData->controlRegisters->sensorMaxXPos = (((int) fn11Control[7] & 0x0F) << 8) + fn11Control[6];
+ instanceData->controlRegisters->sensorMaxYPos = (((int) fn11Control[9] & 0x0F) << 8) + fn11Control[8];
+ printk(KERN_DEBUG "%s: Max X %d Max Y %d", __func__, instanceData->controlRegisters->sensorMaxXPos, instanceData->controlRegisters->sensorMaxYPos);
+ return 0;
+}
+EXPORT_SYMBOL(FN_11_detect);
+
+static ssize_t rmi_fn_11_maxPos_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u %u\n", instance_data->controlRegisters->sensorMaxXPos, instance_data->controlRegisters->sensorMaxYPos);
+}
+
+static ssize_t rmi_fn_11_maxPos_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return -EPERM;
+}
+
+static ssize_t rmi_fn_11_flip_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u %u\n", instance_data->flipX, instance_data->flipY);
+}
+
+static ssize_t rmi_fn_11_flip_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+ unsigned int newX, newY;
+
+ printk(KERN_DEBUG "%s: Flip set to %s", __func__, buf);
+
+ if (sscanf(buf, "%u %u", &newX, &newY) != 2)
+ return -EINVAL;
+ if (newX < 0 || newX > 1 || newY < 0 || newY > 1)
+ return -EINVAL;
+ instance_data->flipX = newX;
+ instance_data->flipY = newY;
+
+ return count;
+}
+
+static ssize_t rmi_fn_11_swap_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u\n", instance_data->swap_axes);
+}
+
+static ssize_t rmi_fn_11_swap_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+ unsigned int newSwap;
+
+ printk(KERN_DEBUG "%s: Swap set to %s", __func__, buf);
+
+ if (sscanf(buf, "%u", &newSwap) != 1)
+ return -EINVAL;
+ if (newSwap < 0 || newSwap > 1)
+ return -EINVAL;
+ instance_data->swap_axes = newSwap;
+
+ f11_set_abs_params(fn);
+
+ return count;
+}
+
+static ssize_t rmi_fn_11_relreport_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u \n", instance_data->relReport);
+}
+
+static ssize_t rmi_fn_11_relreport_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+ unsigned int relRep;
+
+ printk(KERN_DEBUG "%s: relReport set to %s", __func__, buf);
+ if (sscanf(buf, "%u", &relRep) != 1)
+ return -EINVAL;
+ if (relRep < 0 || relRep > 1)
+ return -EINVAL;
+ instance_data->relReport = relRep;
+
+ return count;
+}
+
+static ssize_t rmi_fn_11_offset_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%d %d\n", instance_data->offsetX, instance_data->offsetY);
+}
+
+static ssize_t rmi_fn_11_offset_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+ int newX, newY;
+
+ printk(KERN_DEBUG "%s: Offset set to %s", __func__, buf);
+
+ if (sscanf(buf, "%d %d", &newX, &newY) != 2)
+ return -EINVAL;
+ instance_data->offsetX = newX;
+ instance_data->offsetY = newY;
+
+ return count;
+}
+
+static ssize_t rmi_fn_11_clip_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u %u %u %u\n",
+ instance_data->clipXLow, instance_data->clipXHigh,
+ instance_data->clipYLow, instance_data->clipYHigh);
+}
+
+static ssize_t rmi_fn_11_clip_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+ unsigned int newXLow, newXHigh, newYLow, newYHigh;
+
+ printk(KERN_DEBUG "%s: Clip set to %s", __func__, buf);
+
+ if (sscanf(buf, "%u %u %u %u", &newXLow, &newXHigh, &newYLow, &newYHigh) != 4)
+ return -EINVAL;
+ if (newXLow < 0 || newXLow >= newXHigh || newYLow < 0 || newYLow >= newYHigh)
+ return -EINVAL;
+ instance_data->clipXLow = newXLow;
+ instance_data->clipXHigh = newXHigh;
+ instance_data->clipYLow = newYLow;
+ instance_data->clipYHigh = newYHigh;
+
+ f11_set_abs_params(fn);
+
+ return count;
+}
diff --git a/drivers/input/touchscreen/synaptics/rmi_f11.h b/drivers/input/touchscreen/synaptics/rmi_f11.h
new file mode 100644
index 0000000..0bf386a
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_f11.h
@@ -0,0 +1,43 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $11 header.
+ * Copyright (c) 2007 - 2010, Synaptics Incorporated
+ *
+ * For every RMI4 function that has a data source - like 2D sensors,
+ * buttons, LEDs, GPIOs, etc. - the user will create a new rmi_function_xx.c
+ * file and add these functions to perform the config(), init(), report()
+ * and detect() functionality. The function pointers are then srored under
+ * the RMI function info and these functions will automatically be called by
+ * the global config(), init(), report() and detect() functions that will
+ * loop through all data sources and call the data sources functions using
+ * these functions pointed to by the function ptrs.
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+#ifndef _RMI_FUNCTION_11_H
+#define _RMI_FUNCTION_11_H
+
+void FN_11_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int assertedIRQs);
+int FN_11_config(struct rmi_function_info *rmifninfo);
+int FN_11_init(struct rmi_function_device *function_device);
+int FN_11_detect(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr,
+ unsigned int interruptCount);
+/* No attention function for Fn $11 */
+#endif
diff --git a/drivers/input/touchscreen/synaptics/rmi_f19.c b/drivers/input/touchscreen/synaptics/rmi_f19.c
new file mode 100644
index 0000000..e22c221
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_f19.c
@@ -0,0 +1,513 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $11 support for 2D.
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/input/rmi_platformdata.h>
+
+#include "rmi.h"
+#include "rmi_drvr.h"
+#include "rmi_bus.h"
+#include "rmi_sensor.h"
+#include "rmi_function.h"
+#include "rmi_f19.h"
+
+struct f19_instance_data {
+ struct rmi_F19_query *deviceInfo;
+ struct rmi_F19_control *controlRegisters;
+ bool *buttonDown;
+ unsigned char buttonDataBufferSize;
+ unsigned char *buttonDataBuffer;
+ unsigned char *buttonMap;
+ int fn19ControlRegisterSize;
+ int fn19regCountForBitPerButton;
+ int fn19btnUsageandfilterModeOffset;
+ int fn19intEnableOffset;
+ int fn19intEnableLen;
+ int fn19singleBtnCtrlLen;
+ int fn19singleBtnCtrlOffset;
+ int fn19sensorMapCtrlOffset;
+ int fn19sensorMapCtrlLen;
+ int fn19singleBtnSensOffset;
+ int fn19singleBtnSensLen;
+ int fn19globalSensOffset;
+ int fn19globalHystThreshOffset;
+};
+
+static ssize_t rmi_f19_buttonCount_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_f19_buttonCount_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(buttonCount, 0444, rmi_f19_buttonCount_show, rmi_f19_buttonCount_store); /* RO attr */
+
+static ssize_t rmi_f19_buttonMap_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_f19_buttonMap_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(buttonMap, 0664, rmi_f19_buttonMap_show, rmi_f19_buttonMap_store); /* RW attr */
+
+
+/*
+ * There is no attention function for F19 - it is left NULL
+ * in the function table so it is not called.
+ *
+ */
+
+
+/*
+ * This reads in a sample and reports the F19 source data to the
+ * input subsystem. It is used for both polling and interrupt driven
+ * operation. This is called a lot so don't put in any informational
+ * printks since they will slow things way down!
+ */
+void FN_19_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int assertedIRQs)
+{
+ struct rmi_function_device *function_device;
+ struct f19_instance_data *instanceData;
+ int button;
+
+ instanceData = (struct f19_instance_data *) rmifninfo->fndata;
+
+ function_device = rmifninfo->function_device;
+
+ /* Read the button data. */
+
+ if (rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.dataBaseAddr,
+ instanceData->buttonDataBuffer, instanceData->buttonDataBufferSize)) {
+ printk(KERN_ERR "%s: Failed to read button data registers.\n", __func__);
+ return;
+ }
+
+ /* Generate events for buttons that change state. */
+ for (button = 0; button < instanceData->deviceInfo->buttonCount; button++) {
+ int buttonReg;
+ int buttonShift;
+ bool buttonStatus;
+
+ /* determine which data byte the button status is in */
+ buttonReg = button/4;
+ /* bit shift to get button's status */
+ buttonShift = button % 8;
+ buttonStatus = ((instanceData->buttonDataBuffer[buttonReg] >> buttonShift) & 0x01) != 0;
+
+ /* if the button state changed from the last time report it and store the new state */
+ if (buttonStatus != instanceData->buttonDown[button]) {
+ printk(KERN_DEBUG "%s: Button %d (code %d) -> %d.", __func__, button, instanceData->buttonMap[button], buttonStatus);
+ /* Generate an event here. */
+ input_report_key(function_device->input,
+ instanceData->buttonMap[button], buttonStatus);
+ instanceData->buttonDown[button] = buttonStatus;
+ }
+ }
+
+ input_sync(function_device->input); /* sync after groups of events */
+}
+EXPORT_SYMBOL(FN_19_inthandler);
+
+int FN_19_config(struct rmi_function_info *rmifninfo)
+{
+ int retval = 0;
+
+ pr_debug("%s: RMI4 F19 config\n", __func__);
+
+ /* TODO: Perform configuration. In particular, write any cached control
+ * register values to the device. */
+
+ return retval;
+}
+EXPORT_SYMBOL(FN_19_config);
+
+/* Initialize any F19 specific params and settings - input
+ * settings, device settings, etc.
+ */
+int FN_19_init(struct rmi_function_device *function_device)
+{
+ int i, retval = 0;
+ struct f19_instance_data *instance_data = function_device->rfi->fndata;
+ struct rmi_f19_functiondata *functiondata = rmi_sensor_get_functiondata(function_device->sensor, RMI_F19_INDEX);
+
+ printk(KERN_DEBUG "%s: RMI4 F19 init\n", __func__);
+
+ if (functiondata) {
+ if (functiondata->button_map) {
+ if (functiondata->button_map->nbuttons != instance_data->deviceInfo->buttonCount) {
+ printk(KERN_WARNING "%s: Platformdata button map size (%d) != number of buttons on device (%d) - ignored.", __func__, functiondata->button_map->nbuttons, instance_data->deviceInfo->buttonCount);
+ } else if (!functiondata->button_map->map) {
+ printk(KERN_WARNING "%s: Platformdata button map is missing!", __func__);
+ } else {
+ for (i = 0; i < functiondata->button_map->nbuttons; i++)
+ instance_data->buttonMap[i] = functiondata->button_map->map[i];
+ }
+ }
+ }
+
+ /* Set up any input events. */
+ set_bit(EV_SYN, function_device->input->evbit);
+ set_bit(EV_KEY, function_device->input->evbit);
+ /* set bits for each button...*/
+ for (i = 0; i < instance_data->deviceInfo->buttonCount; i++) {
+ set_bit(instance_data->buttonMap[i], function_device->input->keybit);
+ }
+
+ printk(KERN_DEBUG "%s: Creating sysfs files.", __func__);
+ retval = device_create_file(&function_device->dev, &dev_attr_buttonCount);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create button count.", __func__);
+ return retval;
+ }
+
+ retval = device_create_file(&function_device->dev, &dev_attr_buttonMap);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create button map.", __func__);
+ return retval;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(FN_19_init);
+
+static int getControlRegisters(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr)
+{
+ struct f19_instance_data *instanceData;
+ unsigned char *fn19Control = NULL;
+ int retval = 0;
+
+ /* Get the instance data - it should have been allocated and stored in detect.*/
+ instanceData = rmifninfo->fndata;
+
+ /* Check to make sure instanceData is really there before using.*/
+ if (!instanceData) {
+ printk(KERN_ERR "%s: Error - instance data not initialized yet when getting fn19 control registers.\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Allocate memory for the control registers. */
+ instanceData->controlRegisters = kzalloc(sizeof(struct rmi_F19_control), GFP_KERNEL);
+ if (!instanceData->controlRegisters) {
+ printk(KERN_ERR "%s: Error allocating F19 control registers.\n", __func__);
+ return -ENOMEM;
+ }
+
+ instanceData->fn19regCountForBitPerButton = (instanceData->deviceInfo->buttonCount + 7)/8;
+
+ /* Need to compute the amount of data to read since it varies with the
+ * number of buttons */
+ instanceData->fn19ControlRegisterSize = 1 /* 1 for filter mode and button usage bits */
+ + 2*instanceData->fn19regCountForBitPerButton /* interrupt enable bits and single button participation bits */
+ + 2*instanceData->deviceInfo->buttonCount /* sensormap registers + single button sensitivity registers */
+ + 2; /* 1 for global sensitivity adjust + 1 for global hysteresis threshold */
+
+ /* Allocate a temp memory buffer to read the control registers into */
+ fn19Control = kzalloc(instanceData->fn19ControlRegisterSize, GFP_KERNEL);
+ if (!fn19Control) {
+ printk(KERN_ERR "%s: Error allocating temp storage to read fn19 control info.\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* Grab a copy of the control registers. */
+ retval = rmi_read_multiple(rmifninfo->sensor, fndescr->controlBaseAddr,
+ fn19Control, instanceData->fn19ControlRegisterSize);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to read F19 control registers.", __func__);
+ return retval;
+ }
+
+ /* Copy over control registers data to the instance data */
+ instanceData->fn19btnUsageandfilterModeOffset = 0;
+ instanceData->controlRegisters->buttonUsage = fn19Control[instanceData->fn19btnUsageandfilterModeOffset] & 0x3;
+ instanceData->controlRegisters->filterMode = fn19Control[instanceData->fn19btnUsageandfilterModeOffset] & 0xc;
+
+ /* Fill in interrupt enable registers */
+ instanceData->fn19intEnableOffset = 1;
+ instanceData->fn19intEnableLen = instanceData->fn19regCountForBitPerButton;
+ instanceData->controlRegisters->intEnableRegisters = kzalloc(instanceData->fn19intEnableLen, GFP_KERNEL);
+ if (!instanceData->controlRegisters->intEnableRegisters) {
+ printk(KERN_ERR "%s: Error allocating storage for interrupt enable control info.\n", __func__);
+ return -ENOMEM;
+ }
+ memcpy(instanceData->controlRegisters->intEnableRegisters, &fn19Control[instanceData->fn19intEnableOffset],
+ instanceData->fn19intEnableLen);
+
+ /* Fill in single button control registers */
+ instanceData->fn19singleBtnCtrlOffset = instanceData->fn19intEnableOffset + instanceData->fn19intEnableLen;
+ instanceData->fn19singleBtnCtrlLen = instanceData->fn19regCountForBitPerButton;
+ instanceData->controlRegisters->singleButtonControl = kzalloc(instanceData->fn19singleBtnCtrlLen, GFP_KERNEL);
+ if (!instanceData->controlRegisters->singleButtonControl) {
+ printk(KERN_ERR "%s: Error allocating storage for single button participation control info.\n", __func__);
+ return -ENOMEM;
+ }
+ memcpy(instanceData->controlRegisters->singleButtonControl, &fn19Control[instanceData->fn19singleBtnCtrlOffset],
+ instanceData->fn19singleBtnCtrlLen);
+
+ /* Fill in sensor map registers */
+ instanceData->fn19sensorMapCtrlOffset = instanceData->fn19singleBtnCtrlOffset + instanceData->fn19singleBtnCtrlLen;
+ instanceData->fn19sensorMapCtrlLen = instanceData->deviceInfo->buttonCount;
+ instanceData->controlRegisters->sensorMap = kzalloc(instanceData->fn19sensorMapCtrlLen, GFP_KERNEL);
+ if (!instanceData->controlRegisters->sensorMap) {
+ printk(KERN_ERR "%s: Error allocating storage for sensor map control info.\n", __func__);
+ return -ENOMEM;
+ }
+ memcpy(instanceData->controlRegisters->sensorMap, &fn19Control[instanceData->fn19sensorMapCtrlOffset],
+ instanceData->fn19sensorMapCtrlLen);
+
+ /* Fill in single button sensitivity registers */
+ instanceData->fn19singleBtnSensOffset = instanceData->fn19sensorMapCtrlOffset + instanceData->fn19sensorMapCtrlLen;
+ instanceData->fn19singleBtnSensLen = instanceData->deviceInfo->buttonCount;
+ instanceData->controlRegisters->singleButtonSensitivity = kzalloc(instanceData->fn19singleBtnSensLen, GFP_KERNEL);
+ if (!instanceData->controlRegisters->intEnableRegisters) {
+ printk(KERN_ERR "%s: Error allocating storage for single button sensitivity control info.\n", __func__);
+ return -ENOMEM;
+ }
+ memcpy(instanceData->controlRegisters->singleButtonSensitivity, &fn19Control[instanceData->fn19singleBtnSensOffset],
+ instanceData->fn19singleBtnSensLen);
+
+ /* Fill in global sensitivity adjustment and global hysteresis threshold values */
+ instanceData->fn19globalSensOffset = instanceData->fn19singleBtnSensOffset + instanceData->fn19singleBtnSensLen;
+ instanceData->fn19globalHystThreshOffset = instanceData->fn19globalSensOffset + 1;
+ instanceData->controlRegisters->globalSensitivityAdjustment = fn19Control[instanceData->fn19globalSensOffset] & 0x1f;
+ instanceData->controlRegisters->globalHysteresisThreshold = fn19Control[instanceData->fn19globalHystThreshOffset] & 0x0f;
+
+ /* Free up temp storage that held copy of control registers */
+ kfree(fn19Control);
+
+ return 0;
+}
+
+int FN_19_detect(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr, unsigned int interruptCount)
+{
+ unsigned char fn19queries[2];
+ int retval = 0;
+ int i;
+ struct f19_instance_data *instanceData;
+ int fn19InterruptOffset;
+
+ printk(KERN_DEBUG "%s: RMI4 F19 detect\n", __func__);
+
+ instanceData = kzalloc(sizeof(struct f19_instance_data), GFP_KERNEL);
+ if (!instanceData) {
+ printk(KERN_ERR "%s: Error allocating F19 instance data.\n", __func__);
+ return -ENOMEM;
+ }
+ instanceData->deviceInfo = kzalloc(sizeof(struct rmi_F19_query), GFP_KERNEL);
+ if (!instanceData->deviceInfo) {
+ printk(KERN_ERR "%s: Error allocating F19 device query.\n", __func__);
+ return -ENOMEM;
+ }
+ rmifninfo->fndata = instanceData;
+
+ /* Store addresses - used elsewhere to read data,
+ * control, query, etc. */
+ rmifninfo->funcDescriptor.queryBaseAddr = fndescr->queryBaseAddr;
+ rmifninfo->funcDescriptor.commandBaseAddr = fndescr->commandBaseAddr;
+ rmifninfo->funcDescriptor.controlBaseAddr = fndescr->controlBaseAddr;
+ rmifninfo->funcDescriptor.dataBaseAddr = fndescr->dataBaseAddr;
+ rmifninfo->funcDescriptor.interruptSrcCnt = fndescr->interruptSrcCnt;
+ rmifninfo->funcDescriptor.functionNum = fndescr->functionNum;
+
+ rmifninfo->numSources = fndescr->interruptSrcCnt;
+
+ /* need to get number of fingers supported, data size, etc. -
+ to be used when getting data since the number of registers to
+ read depends on the number of fingers supported and data size. */
+ retval = rmi_read_multiple(rmifninfo->sensor, fndescr->queryBaseAddr, fn19queries,
+ sizeof(fn19queries));
+ if (retval) {
+ printk(KERN_ERR "%s: RMI4 F19 detect: "
+ "Could not read function query registers 0x%x\n",
+ __func__, rmifninfo->funcDescriptor.queryBaseAddr);
+ return retval;
+ }
+
+ /* Extract device data. */
+ instanceData->deviceInfo->configurable = fn19queries[0] & 0x01;
+ instanceData->deviceInfo->hasSensitivityAdjust = fn19queries[0] & 0x02;
+ instanceData->deviceInfo->hasHysteresisThreshold = fn19queries[0] & 0x04;
+ instanceData->deviceInfo->buttonCount = fn19queries[1] & 0x01F;
+ printk(KERN_DEBUG "%s: F19 device - %d buttons...", __func__, instanceData->deviceInfo->buttonCount);
+
+ /* Need to get interrupt info to be used later when handling
+ interrupts. */
+ rmifninfo->interruptRegister = interruptCount/8;
+
+ /* loop through interrupts for each source in fn $11 and or in a bit
+ to the interrupt mask for each. */
+ fn19InterruptOffset = interruptCount % 8;
+
+ for (i = fn19InterruptOffset;
+ i < ((fndescr->interruptSrcCnt & 0x7) + fn19InterruptOffset);
+ i++)
+ rmifninfo->interruptMask |= 1 << i;
+
+ /* Figure out just how much data we'll need to read. */
+ instanceData->buttonDown = kcalloc(instanceData->deviceInfo->buttonCount, sizeof(bool), GFP_KERNEL);
+ if (!instanceData->buttonDown) {
+ printk(KERN_ERR "%s: Error allocating F19 button state buffer.\n", __func__);
+ return -ENOMEM;
+ }
+
+ instanceData->buttonDataBufferSize = (instanceData->deviceInfo->buttonCount + 7) / 8;
+ instanceData->buttonDataBuffer = kcalloc(instanceData->buttonDataBufferSize, sizeof(unsigned char), GFP_KERNEL);
+ if (!instanceData->buttonDataBuffer) {
+ printk(KERN_ERR "%s: Failed to allocate button data buffer.", __func__);
+ return -ENOMEM;
+ }
+
+ instanceData->buttonMap = kcalloc(instanceData->deviceInfo->buttonCount, sizeof(unsigned char), GFP_KERNEL);
+ if (!instanceData->buttonMap) {
+ printk(KERN_ERR "%s: Error allocating F19 button map.\n", __func__);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < instanceData->deviceInfo->buttonCount; i++)
+ instanceData->buttonMap[i] = BTN_0 + i; /* default values */
+
+ /* Grab the control register info. */
+ retval = getControlRegisters(rmifninfo, fndescr);
+ if (retval) {
+ printk(KERN_ERR "%s: Error %d getting fn19 control register info.\n", __func__, retval);
+ return retval;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(FN_19_detect);
+
+static ssize_t rmi_f19_buttonCount_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f19_instance_data *instance_data = (struct f19_instance_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u\n", instance_data->deviceInfo->buttonCount);
+}
+
+static ssize_t rmi_f19_buttonCount_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ /* Not allowed. */
+ return -EPERM;
+}
+
+static ssize_t rmi_f19_buttonMap_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f19_instance_data *instance_data = (struct f19_instance_data *)fn->rfi->fndata;
+ int i, len, totalLen = 0;
+
+ /* loop through each button map value and copy it's string representation into buf */
+ for (i = 0; i < instance_data->deviceInfo->buttonCount; i++) {
+ /* get next button mapping value and write it to buf */
+ len = sprintf(buf, "%u ", instance_data->buttonMap[i]);
+ /* bump up ptr to next location in buf if the sprintf was valid */
+ if (len > 0) {
+ buf += len;
+ totalLen += len;
+ }
+ }
+
+ return totalLen;
+}
+
+static ssize_t rmi_f19_buttonMap_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f19_instance_data *instance_data = (struct f19_instance_data *)fn->rfi->fndata;
+ unsigned int button;
+ int i;
+ int retval = count;
+ int buttonCount = 0;
+ unsigned char *tmpButtonMap;
+
+ /* Do validation on the button map data passed in. */
+ /* Store button mappings into a temp buffer and then verify button count
+ and data prior to clearing out old button mappings and storing the new ones. */
+ tmpButtonMap = kzalloc(instance_data->deviceInfo->buttonCount, GFP_KERNEL);
+ if (!tmpButtonMap) {
+ printk(KERN_ERR "%s: Error allocating temp button map.\n", __func__);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < instance_data->deviceInfo->buttonCount && *buf != 0; i++) {
+ /* get next button mapping value and store and bump up to point to next item in buf */
+ sscanf(buf, "%u", &button);
+
+ /* Make sure the key is a valid key */
+ if (button > KEY_MAX) {
+ printk(KERN_ERR "%s: Error - button map for button %d is not a valid value 0x%x.\n",
+ __func__, i, button);
+ retval = -EINVAL;
+ goto err_ret;
+ }
+
+ tmpButtonMap[i] = button;
+ buttonCount++;
+
+ /* bump up buf to point to next item to read */
+ while (*buf != 0) {
+ buf++;
+ if (*(buf-1) == ' ')
+ break;
+ }
+ }
+
+ /* Make sure the button count matches */
+ if (buttonCount != instance_data->deviceInfo->buttonCount) {
+ printk(KERN_ERR "%s: Error - button map count of %d doesn't match device button count of %d.\n"
+ , __func__, buttonCount, instance_data->deviceInfo->buttonCount);
+ retval = -EINVAL;
+ goto err_ret;
+ }
+
+ /* Clear out old buttonMap data */
+ memset(instance_data->buttonMap, 0, buttonCount);
+
+ /* Loop through the temp buffer and copy the button event and set the key bit for the new mapping. */
+ for (i = 0; i < buttonCount; i++) {
+ instance_data->buttonMap[i] = tmpButtonMap[1];
+ set_bit(instance_data->buttonMap[i], fn->input->keybit);
+ }
+
+err_ret:
+ kfree(tmpButtonMap);
+
+ return retval;
+}
diff --git a/drivers/input/touchscreen/synaptics/rmi_f19.h b/drivers/input/touchscreen/synaptics/rmi_f19.h
new file mode 100644
index 0000000..41f3e4d
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_f19.h
@@ -0,0 +1,43 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $11 header.
+ * Copyright (c) 2007 - 2010, Synaptics Incorporated
+ *
+ * For every RMI4 function that has a data source - like 2D sensors,
+ * buttons, LEDs, GPIOs, etc. - the user will create a new rmi_function_xx.c
+ * file and add these functions to perform the config(), init(), report()
+ * and detect() functionality. The function pointers are then srored under
+ * the RMI function info and these functions will automatically be called by
+ * the global config(), init(), report() and detect() functions that will
+ * loop through all data sources and call the data sources functions using
+ * these functions pointed to by the function ptrs.
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+#ifndef _RMI_FUNCTION_19_H
+#define _RMI_FUNCTION_19_H
+
+void FN_19_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int assertedIRQs);
+int FN_19_config(struct rmi_function_info *rmifninfo);
+int FN_19_init(struct rmi_function_device *function_device);
+int FN_19_detect(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr,
+ unsigned int interruptCount);
+/* No attention function for Fn $19 */
+#endif
diff --git a/drivers/input/touchscreen/synaptics/rmi_f34.c b/drivers/input/touchscreen/synaptics/rmi_f34.c
new file mode 100644
index 0000000..f884410
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_f34.c
@@ -0,0 +1,556 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $34 support for sensor
+ * firmware reflashing.
+ *
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/input.h>
+#include <linux/sysfs.h>
+#include <linux/math64.h>
+#include "rmi_drvr.h"
+#include "rmi_bus.h"
+#include "rmi_sensor.h"
+#include "rmi_function.h"
+#include "rmi_f34.h"
+
+/* data specific to fn $34 that needs to be kept around */
+struct rmi_fn_34_data {
+ unsigned char status;
+ unsigned char cmd;
+ unsigned short bootloaderid;
+ unsigned short blocksize;
+};
+
+
+static ssize_t rmi_fn_34_status_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_34_status_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+
+static ssize_t rmi_fn_34_cmd_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_34_cmd_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+static ssize_t rmi_fn_34_data_read(struct file *,
+ struct kobject *kobj,
+ struct bin_attribute *attributes,
+ char *buf, loff_t pos, size_t count);
+
+static ssize_t rmi_fn_34_data_write(struct file *,
+ struct kobject *kobj,
+ struct bin_attribute *attributes,
+ char *buf, loff_t pos, size_t count);
+
+static ssize_t rmi_fn_34_bootloaderid_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_34_bootloaderid_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+static ssize_t rmi_fn_34_blocksize_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_34_blocksize_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+/* define the device attributes using DEVICE_ATTR macros */
+DEVICE_ATTR(status, 0444, rmi_fn_34_status_show, rmi_fn_34_status_store); /* RO attr */
+DEVICE_ATTR(cmd, 0664, rmi_fn_34_cmd_show, rmi_fn_34_cmd_store); /* RW attr */
+DEVICE_ATTR(bootloaderid, 0644, rmi_fn_34_bootloaderid_show, rmi_fn_34_bootloaderid_store); /* RW attr */
+DEVICE_ATTR(blocksize, 0444, rmi_fn_34_blocksize_show, rmi_fn_34_blocksize_store); /* RO attr */
+
+
+struct bin_attribute dev_attr_data = {
+ .attr = {
+ .name = "data",
+ .mode = 0644
+ },
+ .size = 0,
+ .read = rmi_fn_34_data_read,
+ .write = rmi_fn_34_data_write,
+};
+
+/* Helper fn to convert from processor specific data to our firmware specific endianness.
+ * TODO: Should we use ntohs or something like that?
+ */
+void copyEndianAgnostic(unsigned char *dest, unsigned short src)
+{
+ dest[0] = src%0x100;
+ dest[1] = src/0x100;
+}
+
+/*.
+ * The interrupt handler for Fn $34.
+ */
+void FN_34_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int assertedIRQs)
+{
+ unsigned int status;
+ struct rmi_fn_34_data *fn34data = (struct rmi_fn_34_data *)rmifninfo->fndata;
+
+ /* Read the Fn $34 status register to see whether the previous command executed OK */
+ /* inform user space - through a sysfs param. */
+ if (rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.dataBaseAddr+3,
+ (unsigned char *)&status, 1)) {
+ printk(KERN_ERR "%s : Could not read status from 0x%x\n",
+ __func__, rmifninfo->funcDescriptor.dataBaseAddr+3);
+ status = 0xff; /* failure */
+ }
+
+ /* set a sysfs value that the user mode can read - only upper 4 bits are the status */
+ fn34data->status = status & 0xf0; /* successful is $80, anything else is failure */
+}
+EXPORT_SYMBOL(FN_34_inthandler);
+
+void FN_34_attention(struct rmi_function_info *rmifninfo)
+{
+
+}
+EXPORT_SYMBOL(FN_34_attention);
+
+int FN_34_config(struct rmi_function_info *rmifninfo)
+{
+ pr_debug("%s: RMI4 function $34 config\n", __func__);
+ return 0;
+}
+EXPORT_SYMBOL(FN_34_config);
+
+
+int FN_34_init(struct rmi_function_device *function_device)
+{
+ int retval = 0;
+ unsigned char uData[2];
+ struct rmi_function_info *rmifninfo = function_device->rfi;
+ struct rmi_fn_34_data *fn34data;
+
+ pr_debug("%s: RMI4 function $34 init\n", __func__);
+
+ /* Here we will need to set up sysfs files for Bootloader ID and Block size */
+ fn34data = kzalloc(sizeof(struct rmi_fn_34_data), GFP_KERNEL);
+ if (!fn34data) {
+ printk(KERN_ERR "%s: Error allocating memeory for rmi_fn_34_data.\n", __func__);
+ return -ENOMEM;
+ }
+ rmifninfo->fndata = (void *)fn34data;
+
+ /* set up sysfs file for Bootloader ID. */
+ if (sysfs_create_file(&function_device->dev.kobj, &dev_attr_bootloaderid.attr) < 0) {
+ printk(KERN_ERR "%s: Failed to create sysfs file for fn 34 bootloaderid.\n", __func__);
+ return -ENODEV;
+ }
+
+ /* set up sysfs file for Block Size. */
+ if (sysfs_create_file(&function_device->dev.kobj, &dev_attr_blocksize.attr) < 0) {
+ printk(KERN_ERR "%s: Failed to create sysfs file for fn 34 blocksize.\n", __func__);
+ return -ENODEV;
+ }
+
+ /* get the Bootloader ID and Block Size and store in the sysfs attributes. */
+ retval = rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.queryBaseAddr,
+ uData, 2);
+ if (retval) {
+ printk(KERN_ERR "%s : Could not read bootloaderid from 0x%x\n",
+ __func__, function_device->function->functionQueryBaseAddr);
+ return retval;
+ }
+ /* need to convert from our firmware storage to processore specific data */
+ fn34data->bootloaderid = (unsigned int)uData[0] + (unsigned int)uData[1]*0x100;
+
+ retval = rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.queryBaseAddr+3,
+ uData, 2);
+ if (retval) {
+ printk(KERN_ERR "%s : Could not read block size from 0x%x\n",
+ __func__, rmifninfo->funcDescriptor.queryBaseAddr+3);
+ return retval;
+ }
+ /* need to convert from our firmware storage to processor specific data */
+ fn34data->blocksize = (unsigned int)uData[0] + (unsigned int)uData[1]*0x100;
+
+ /* set up sysfs file for status. */
+ if (sysfs_create_file(&function_device->dev.kobj, &dev_attr_status.attr) < 0) {
+ printk(KERN_ERR "%s: Failed to create sysfs file for fn 34 status.\n", __func__);
+ return -ENODEV;
+ }
+
+ /* Also, sysfs will need to have a file set up to distinguish between commands - like
+ Config write/read, Image write/verify.*/
+ /* set up sysfs file for command code. */
+ if (sysfs_create_file(&function_device->dev.kobj, &dev_attr_cmd.attr) < 0) {
+ printk(KERN_ERR "%s: Failed to create sysfs file for fn 34 cmd.\n", __func__);
+ return -ENODEV;
+ }
+
+ /* We will also need a sysfs file for the image/config block to write or read.*/
+ /* set up sysfs bin file for binary data block. Since the image is already in our format
+ there is no need to convert the data for endianess. */
+ if (sysfs_create_bin_file(&function_device->dev.kobj, &dev_attr_data) < 0) {
+ printk(KERN_ERR "%s: Failed to create sysfs file for fn 34 data.\n", __func__);
+ return -ENODEV;
+ }
+
+ return retval;
+}
+EXPORT_SYMBOL(FN_34_init);
+
+int FN_34_detect(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr, unsigned int interruptCount)
+{
+ int i;
+ int InterruptOffset;
+ int retval = 0;
+
+ pr_debug("%s: RMI4 function $34 detect\n", __func__);
+ if (rmifninfo->sensor == NULL) {
+ printk(KERN_ERR "%s: NULL sensor passed in!", __func__);
+ return -EINVAL;
+ }
+
+ /* Store addresses - used elsewhere to read data,
+ * control, query, etc. */
+ rmifninfo->funcDescriptor.queryBaseAddr = fndescr->queryBaseAddr;
+ rmifninfo->funcDescriptor.commandBaseAddr = fndescr->commandBaseAddr;
+ rmifninfo->funcDescriptor.controlBaseAddr = fndescr->controlBaseAddr;
+ rmifninfo->funcDescriptor.dataBaseAddr = fndescr->dataBaseAddr;
+ rmifninfo->funcDescriptor.interruptSrcCnt = fndescr->interruptSrcCnt;
+ rmifninfo->funcDescriptor.functionNum = fndescr->functionNum;
+
+ rmifninfo->numSources = fndescr->interruptSrcCnt;
+
+ /* Need to get interrupt info to be used later when handling
+ interrupts. */
+ rmifninfo->interruptRegister = interruptCount/8;
+
+ /* loop through interrupts for each source and or in a bit
+ to the interrupt mask for each. */
+ InterruptOffset = interruptCount % 8;
+
+ for (i = InterruptOffset;
+ i < ((fndescr->interruptSrcCnt & 0x7) + InterruptOffset);
+ i++) {
+ rmifninfo->interruptMask |= 1 << i;
+ }
+
+ return retval;
+}
+EXPORT_SYMBOL(FN_34_detect);
+
+static ssize_t rmi_fn_34_bootloaderid_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct rmi_fn_34_data *fn34data = (struct rmi_fn_34_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u\n", fn34data->bootloaderid);
+}
+
+static ssize_t rmi_fn_34_bootloaderid_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int error;
+ unsigned long val;
+ unsigned char uData[2];
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct rmi_fn_34_data *fn34data = (struct rmi_fn_34_data *)fn->rfi->fndata;
+
+ /* need to convert the string data to an actual value */
+ error = strict_strtoul(buf, 10, &val);
+
+ if (error)
+ return error;
+
+ fn34data->bootloaderid = val;
+
+ /* Write the Bootloader ID key data back to the first two Block Data registers
+ (F34_Flash_Data2.0 and F34_Flash_Data2.1).*/
+ copyEndianAgnostic(uData, (unsigned short)val);
+ error = rmi_write_multiple(fn->sensor, fn->function->functionDataBaseAddr,
+ uData, 2);
+ if (error) {
+ printk(KERN_ERR "%s : Could not write bootloader id to 0x%x\n",
+ __func__, fn->function->functionDataBaseAddr);
+ return error;
+ }
+
+ return count;
+}
+
+static ssize_t rmi_fn_34_blocksize_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct rmi_fn_34_data *fn34data = (struct rmi_fn_34_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u\n", fn34data->blocksize);
+}
+
+static ssize_t rmi_fn_34_blocksize_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ /* Block Size is RO so we shouldn't do anything if the
+ user space writes to the sysfs file. */
+
+ return -EPERM;
+}
+
+static ssize_t rmi_fn_34_status_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct rmi_fn_34_data *fn34data = (struct rmi_fn_34_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u\n", fn34data->status);
+}
+
+static ssize_t rmi_fn_34_status_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ /* Status is RO so we shouldn't do anything if the user
+ app writes to the sysfs file. */
+ return -EPERM;
+}
+
+static ssize_t rmi_fn_34_cmd_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct rmi_fn_34_data *fn34data = (struct rmi_fn_34_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u\n", fn34data->cmd);
+}
+
+static ssize_t rmi_fn_34_cmd_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct rmi_fn_34_data *fn34data = (struct rmi_fn_34_data *)fn->rfi->fndata;
+ unsigned long val;
+ unsigned char cmd;
+ int error;
+
+ /* need to convert the string data to an actual value */
+ error = strict_strtoul(buf, 10, &val);
+
+ if (error)
+ return error;
+
+ fn34data->cmd = val;
+
+ /* determine the proper command to issue.
+ */
+ switch (val) {
+ case ENABLE_FLASH_PROG:
+ /* Issue a Flash Program Enable ($0F) command to the Flash Command
+ (F34_Flash_Data3, bits 3:0) field.*/
+ cmd = 0x0F;
+ error = rmi_write_multiple(fn->sensor, fn->function->functionDataBaseAddr+3,
+ (unsigned char *)&cmd, 1);
+ if (error) {
+ printk(KERN_ERR "%s : Could not write Flash Program Enable cmd to 0x%x\n",
+ __func__, fn->function->functionDataBaseAddr+3);
+ return error;
+ }
+ break;
+
+ case ERASE_ALL:
+ /* Issue a Erase All ($03) command to the Flash Command
+ (F34_Flash_Data3, bits 3:0) field.*/
+ cmd = 0x03;
+ error = rmi_write_multiple(fn->sensor, fn->function->functionDataBaseAddr+3,
+ (unsigned char *)&cmd, 1);
+ if (error) {
+ printk(KERN_ERR "%s : Could not write Erase All cmd to 0x%x\n",
+ __func__, fn->function->functionDataBaseAddr+3);
+ return error;
+ }
+ break;
+
+ case ERASE_CONFIG:
+ /* Issue a Erase Configuration ($07) command to the Flash Command
+ (F34_Flash_Data3, bits 3:0) field.*/
+ cmd = 0x07;
+ error = rmi_write_multiple(fn->sensor, fn->function->functionDataBaseAddr+3,
+ (unsigned char *)&cmd, 1);
+ if (error) {
+ printk(KERN_ERR "%s : Could not write Erase Configuration cmd to 0x%x\n",
+ __func__, fn->function->functionDataBaseAddr+3);
+ return error;
+ }
+ break;
+
+ case WRITE_FW_BLOCK:
+ /* Issue a Write Firmware Block ($02) command to the Flash Command
+ (F34_Flash_Data3, bits 3:0) field.*/
+ cmd = 0x02;
+ error = rmi_write_multiple(fn->sensor, fn->function->functionDataBaseAddr+3,
+ (unsigned char *)&cmd, 1);
+ if (error) {
+ printk(KERN_ERR "%s : Could not write Write Firmware Block cmd to 0x%x\n",
+ __func__, fn->function->functionDataBaseAddr+3);
+ return error;
+ }
+ break;
+
+ case WRITE_CONFIG_BLOCK:
+ /* Issue a Write Config Block ($06) command to the Flash Command
+ (F34_Flash_Data3, bits 3:0) field.*/
+ cmd = 0x06;
+ error = rmi_write_multiple(fn->sensor, fn->function->functionDataBaseAddr+3,
+ (unsigned char *)&cmd, 1);
+ if (error) {
+ printk(KERN_ERR "%s : Could not write Write Config Block cmd to 0x%x\n",
+ __func__, fn->function->functionDataBaseAddr+3);
+ return error;
+ }
+ break;
+
+ case READ_CONFIG_BLOCK:
+ /* Issue a Read Config Block ($05) command to the Flash Command
+ (F34_Flash_Data3, bits 3:0) field.*/
+ cmd = 0x05;
+ error = rmi_write_multiple(fn->sensor, fn->function->functionDataBaseAddr+3,
+ (unsigned char *)&cmd, 1);
+ if (error) {
+ printk(KERN_ERR "%s : Could not write Read Config Block cmd to 0x%x\n",
+ __func__, fn->function->functionDataBaseAddr+3);
+ return error;
+ }
+ break;
+
+ case DISABLE_FLASH_PROG:
+ /* Issue a reset command ($01) - this will reboot the sensor and ATTN will now go to
+ the Fn $01 instead of the Fn $34 since the sensor will no longer be in Flash mode. */
+ cmd = 0x01;
+ /*if ((error = rmi_write_multiple(fn->sensor, fn->sensor->sensorCommandBaseAddr,
+ (unsigned char *)&cmd, 1))) {
+ printk(KERN_ERR "%s : Could not write Reset cmd to 0x%x\n",
+ __func__, fn->sensor->sensorCommandBaseAddr);
+ return error;
+ }*/
+ break;
+
+ default:
+ pr_debug("%s: RMI4 function $34 - unknown command.\n", __func__);
+ break;
+ }
+
+ return count;
+}
+
+static ssize_t rmi_fn_34_data_read(struct file * filp,
+ struct kobject *kobj,
+ struct bin_attribute *attributes,
+ char *buf, loff_t pos, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ int error;
+
+ /* TODO: add check for count to verify it's the correct blocksize */
+
+ /* read the data from flash into buf. */
+ /* the app layer will be blocked at reading from the sysfs file. */
+ /* when we return the count (or error if we fail) the app will resume. */
+ error = rmi_read_multiple(fn->sensor, fn->function->functionDataBaseAddr+pos,
+ (unsigned char *)buf, count);
+ if (error) {
+ printk(KERN_ERR "%s : Could not read data from 0x%llx\n",
+ __func__, fn->function->functionDataBaseAddr+pos);
+ return error;
+ }
+
+ return count;
+}
+
+static ssize_t rmi_fn_34_data_write(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *attributes,
+ char *buf, loff_t pos, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct rmi_fn_34_data *fn34data = (struct rmi_fn_34_data *)fn->rfi->fndata;
+ unsigned int blocknum;
+ int error;
+
+ /* write the data from buf to flash. */
+ /* the app layer will be blocked at writing to the sysfs file. */
+ /* when we return the count (or error if we fail) the app will resume. */
+
+ /* TODO: Add check on count - if non-zero veriy it's the correct blocksize */
+
+ /* Verify that the byte offset is always aligned on a block boundary and if not
+ return an error. We can't just use the mod operator % and do a (pos % fn34data->blocksize) because of a gcc
+ bug that results in undefined symbols. So we have to compute it the hard
+ way. Grumble. */
+ unsigned int remainder;
+ div_u64_rem(pos, fn34data->blocksize, &remainder);
+ if (remainder) {
+ printk(KERN_ERR "%s : Invalid byte offset of %llx leads to invalid block number.\n",
+ __func__, pos);
+ return -EINVAL;
+ }
+
+ /* Compute the block number using the byte offset (pos) and the block size.
+ once again, we can't just do a divide due to a gcc bug. */
+ blocknum = div_u64(pos, fn34data->blocksize);
+
+ /* Write the block number first */
+ error = rmi_write_multiple(fn->sensor, fn->function->functionDataBaseAddr,
+ (unsigned char *)&blocknum, 2);
+ if (error) {
+ printk(KERN_ERR "%s : Could not write block number to 0x%x\n",
+ __func__, fn->function->functionDataBaseAddr);
+ return error;
+ }
+
+ /* Write the data block - only if the count is non-zero */
+ if (count) {
+ error = rmi_write_multiple(fn->sensor, fn->function->functionDataBaseAddr+2,
+ (unsigned char *)buf, count);
+ if (error) {
+ printk(KERN_ERR "%s : Could not write block data to 0x%x\n",
+ __func__, fn->function->functionDataBaseAddr+2);
+ return error;
+ }
+ }
+
+ return count;
+}
diff --git a/drivers/input/touchscreen/synaptics/rmi_f34.h b/drivers/input/touchscreen/synaptics/rmi_f34.h
new file mode 100644
index 0000000..48293e3
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_f34.h
@@ -0,0 +1,50 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $34 header.
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ * There is only one function $34 for each RMI4 sensor. This will be
+ * the function that is used to reflash the firmware and get the
+ * boot loader address and the boot image block size.
+ *
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+#ifndef _RMI_FUNCTION_34_H
+#define _RMI_FUNCTION_34_H
+
+/* define fn $34 commands */
+#define WRITE_FW_BLOCK 2
+#define ERASE_ALL 3
+#define READ_CONFIG_BLOCK 5
+#define WRITE_CONFIG_BLOCK 6
+#define ERASE_CONFIG 7
+#define ENABLE_FLASH_PROG 15
+#define DISABLE_FLASH_PROG 16
+
+void FN_34_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int assertedIRQs);
+int FN_34_config(struct rmi_function_info *rmifninfo);
+int FN_34_init(struct rmi_function_device *function_device);
+int FN_34_detect(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr,
+ unsigned int interruptCount);
+void FN_34_attention(struct rmi_function_info *rmifninfo);
+
+#endif
diff --git a/drivers/input/touchscreen/synaptics/rmi_function.c b/drivers/input/touchscreen/synaptics/rmi_function.c
new file mode 100644
index 0000000..2be6ef6
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_function.c
@@ -0,0 +1,325 @@
+/**
+ * Synaptics Register Mapped Interface (RMI4) - RMI Function Module.
+ * Copyright (C) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+static const char functionname[10] = "fn";
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/hrtimer.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+
+#include "rmi_drvr.h"
+#include "rmi_function.h"
+#include "rmi_bus.h"
+#include "rmi_sensor.h"
+#include "rmi_f01.h"
+#include "rmi_f05.h"
+#include "rmi_f11.h"
+#include "rmi_f19.h"
+#include "rmi_f34.h"
+
+/* Each time a new RMI4 function support is added the developer needs to
+bump the number of supported functions and add the info for
+that RMI4 function to the array along with pointers to the report,
+config, init and detect functions that they coded in rmi_fxx.c
+and rmi_fxx.h - where xx is the RMI4 function number in hex for the new
+RMI4 data source function. The information for the RMI4 functions is
+obtained from the RMI4 specification document.
+ */
+#define rmi4_num_supported_data_src_fns 5
+
+/* supported RMI4 functions list - controls what we
+ * will provide support for - if it's not in the list then
+ * the developer needs to add support functions for it.*/
+static LIST_HEAD(fns_list);
+static DEFINE_MUTEX(fns_mutex);
+
+/* NOTE: Developer - add in any new RMI4 fn data info - function number
+ * and ptrs to report, config, init and detect functions. This data is
+ * used to point to the functions that need to be called to config, init,
+ * detect and report data for the new RMI4 function. Refer to the RMI4
+ * specification for information on RMI4 functions.
+ */
+/* TODO: This will eventually go away, and each function will be an independent
+ * module. */
+static struct rmi_functions_data
+ rmi4_supported_data_src_functions[rmi4_num_supported_data_src_fns] = {
+ /* Fn $11 - 2D sensing */
+ {.functionNumber = 0x11, .inthandlerFn = FN_11_inthandler, .configFn = FN_11_config, .initFn = FN_11_init, .detectFn = FN_11_detect, .attnFn = NULL},
+ /* Fn $01 - device control */
+ {.functionNumber = 0x01, .inthandlerFn = FN_01_inthandler, .configFn = FN_01_config, .initFn = FN_01_init, .detectFn = FN_01_detect, .attnFn = FN_01_attention},
+ /* Fn $05 - analog report */
+ {.functionNumber = 0x05, .inthandlerFn = FN_05_inthandler, .configFn = FN_05_config, .initFn = FN_05_init, .detectFn = FN_05_detect, .attnFn = NULL},
+ /* Fn $19 - buttons */
+ {.functionNumber = 0x19, .inthandlerFn = FN_19_inthandler, .configFn = FN_19_config, .initFn = FN_19_init, .detectFn = FN_19_detect, .attnFn = NULL},
+ /* Fn $34 - firmware reflash */
+ {.functionNumber = 0x34, .inthandlerFn = FN_34_inthandler, .configFn = FN_34_config, .initFn = FN_34_init, .detectFn = FN_34_detect, .attnFn = FN_34_attention},
+};
+
+
+/* This function is here to provide a way for external modules to access the
+ * functions list. It will try to find a matching function base on the passed
+ * in RMI4 function number and return the pointer to the struct rmi_functions
+ * if a match is found or NULL if not found.
+ */
+struct rmi_functions *rmi_find_function(int functionNum)
+{
+ struct rmi_functions *fn;
+ bool found = false;
+
+ list_for_each_entry(fn, &fns_list, link) {
+ if (functionNum == fn->functionNum) {
+ found = true;
+ break;
+ }
+ }
+
+ if (!found)
+ return NULL;
+ else
+ return fn;
+}
+EXPORT_SYMBOL(rmi_find_function);
+
+
+static void rmi_function_config(struct rmi_function_device *function)
+{
+ printk(KERN_DEBUG "%s: rmi_function_config", __func__);
+
+}
+
+#if 0 /* This may not be needed anymore. */
+/**
+ * This is the probe function passed to the RMI4 subsystem that gives us a
+ * chance to recognize an RMI4 function.
+ */
+static int rmi_function_probe(struct rmi_function_driver *function)
+{
+ struct rmi_phys_driver *rpd;
+
+ rpd = function->rpd;
+
+ if (!rpd) {
+ printk(KERN_ERR "%s: Invalid rmi physical driver - null ptr.", __func__);
+ return 0;
+ }
+
+ return 1;
+}
+#endif
+
+/** Just a stub for now.
+ */
+static int rmi_function_suspend(struct device *dev, pm_message_t state)
+{
+ printk(KERN_INFO "%s: function suspend called.", __func__);
+ return 0;
+}
+
+/** Just a stub for now.
+ */
+static int rmi_function_resume(struct device *dev)
+{
+ printk(KERN_INFO "%s: function resume called.", __func__);
+ return 0;
+}
+
+int rmi_function_register_driver(struct rmi_function_driver *drv, int fnNumber)
+{
+ int retval;
+ char *drvrname;
+
+ printk(KERN_INFO "%s: Registering function driver for F%02x.\n", __func__, fnNumber);
+
+ retval = 0;
+
+ /* Create a function device and function driver for this Fn */
+ drvrname = kzalloc(sizeof(functionname) + 4, GFP_KERNEL);
+ if (!drvrname) {
+ printk(KERN_ERR "%s: Error allocating memeory for rmi_function_driver name.\n", __func__);
+ return -ENOMEM;
+ }
+ sprintf(drvrname, "fn%02x", fnNumber);
+
+ drv->drv.name = drvrname;
+ drv->module = drv->drv.owner;
+
+ drv->drv.suspend = rmi_function_suspend;
+ drv->drv.resume = rmi_function_resume;
+
+ /* register the sensor driver */
+ retval = driver_register(&drv->drv);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed driver_register %d\n",
+ __func__, retval);
+ }
+
+ return retval;
+}
+EXPORT_SYMBOL(rmi_function_register_driver);
+
+void rmi_function_unregister_driver(struct rmi_function_driver *drv)
+{
+ printk(KERN_INFO "%s: Unregistering function driver.\n", __func__);
+
+ driver_unregister(&drv->drv);
+}
+EXPORT_SYMBOL(rmi_function_unregister_driver);
+
+int rmi_function_register_device(struct rmi_function_device *function_device, int fnNumber)
+{
+ struct input_dev *input;
+ int retval;
+
+ printk(KERN_INFO "%s: Registering function device for F%02x.\n", __func__, fnNumber);
+
+ retval = 0;
+
+ /* make name - fn11, fn19, etc. */
+ dev_set_name(&function_device->dev, "%sfn%02x", function_device->sensor->drv.name, fnNumber);
+ dev_set_drvdata(&function_device->dev, function_device);
+ retval = device_register(&function_device->dev);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed device_register for function device.\n",
+ __func__);
+ return retval;
+ }
+
+ input = input_allocate_device();
+ if (input == NULL) {
+ printk(KERN_ERR "%s: Failed to allocate memory for a "
+ "new input device.\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ input->name = dev_name(&function_device->dev);
+ input->phys = "rmi_function";
+ function_device->input = input;
+
+
+ /* init any input specific params for this function */
+ function_device->rmi_funcs->init(function_device);
+
+ retval = input_register_device(input);
+
+ if (retval) {
+ printk(KERN_ERR "%s: Failed input_register_device.\n",
+ __func__);
+ return retval;
+ }
+
+
+ rmi_function_config(function_device);
+
+ return retval;
+}
+EXPORT_SYMBOL(rmi_function_register_device);
+
+void rmi_function_unregister_device(struct rmi_function_device *dev)
+{
+ printk(KERN_INFO "%s: Unregistering function device.n", __func__);
+
+ input_unregister_device(dev->input);
+ device_unregister(&dev->dev);
+}
+EXPORT_SYMBOL(rmi_function_unregister_device);
+
+static int __init rmi_function_init(void)
+{
+ struct rmi_functions_data *rmi4_fn;
+ int i;
+
+ printk(KERN_DEBUG "%s: RMI Function Init\n", __func__);
+
+ /* Initialize global list of RMI4 Functions.
+ We need to add the supported RMI4 funcions so that we will have
+ pointers to the associated functions for init, config, report and
+ detect. See rmi.h for more details. The developer will add a new
+ RMI4 function number in the array in rmi_drvr.h, then add a new file to
+ the build (called rmi_fXX.c where XX is the hex number for
+ the added RMI4 function). The rest should be automatic.
+ */
+
+ /* for each function number defined in rmi.h creat a new rmi_function
+ struct and initialize the pointers to the servicing functions and then
+ add it into the global list for function support.
+ */
+ for (i = 0; i < rmi4_num_supported_data_src_fns; i++) {
+ /* Add new rmi4 function struct to list */
+ struct rmi_functions *fn = kzalloc(sizeof(*fn), GFP_KERNEL);
+ if (!fn) {
+ printk(KERN_ERR "%s: could not allocate memory "
+ "for rmi_function struct for function 0x%x\n",
+ __func__,
+ rmi4_supported_data_src_functions[i].functionNumber);
+ return -ENOMEM;
+ } else {
+
+ rmi4_fn = &rmi4_supported_data_src_functions[i];
+ fn->functionNum = rmi4_fn->functionNumber;
+ /* Fill in ptrs to functions. The functions are
+ linked in from a file called rmi_fxx.c
+ where xx is the hex number of the RMI4 function
+ from the RMI4 spec. Also, the function prototypes
+ need to be added to rmi_fxx.h - also where
+ xx is the hex number of the RMI4 function. So
+ that you don't get compile errors and that new
+ header needs to be included in the rmi_function.h
+ */
+ fn->inthandler = rmi4_fn->inthandlerFn;
+ fn->config = rmi4_fn->configFn;
+ fn->init = rmi4_fn->initFn;
+ fn->detect = rmi4_fn->detectFn;
+ fn->attention = rmi4_fn->attnFn;
+
+ /* Add the new fn to the global list */
+ mutex_lock(&fns_mutex);
+ list_add_tail(&fn->link, &fns_list);
+ mutex_unlock(&fns_mutex);
+ }
+ }
+
+ return 0;
+}
+
+static void __exit rmi_function_exit(void)
+{
+ printk(KERN_DEBUG "%s: RMI Function Exit\n", __func__);
+}
+
+
+module_init(rmi_function_init);
+module_exit(rmi_function_exit);
+
+MODULE_AUTHOR("Synaptics, Inc.");
+MODULE_DESCRIPTION("RMI4 Function Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/synaptics/rmi_function.h b/drivers/input/touchscreen/synaptics/rmi_function.h
new file mode 100644
index 0000000..801609b
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_function.h
@@ -0,0 +1,213 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function Device Header File.
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#ifndef _RMI_FUNCTION_H
+#define _RMI_FUNCTION_H
+
+#include <linux/input.h>
+#include <linux/device.h>
+
+
+/* For each function present on the RMI device, there will be a corresponding
+ * entry in the functions list of the rmi_sensor_driver structure. This entry
+ * gives information about the number of data sources and the number of data
+ * registers associated with the function.
+ */
+struct rmi_function_info {
+ /* The sensor this function belongs to.
+ */
+ struct rmi_sensor_driver *sensor;
+
+ /* A device associated with this function.
+ */
+ struct rmi_function_device *function_device;
+
+ unsigned char functionNum;
+
+ /* This is the number of data sources associated with the function.*/
+ unsigned char numSources;
+
+ /* This is the number of data registers to read.*/
+ unsigned char dataRegBlockSize;
+
+ /* This is the interrupt register and mask - needed for enabling the
+ * interrupts and for checking what source had caused the attention line
+ * interrupt.
+ */
+ unsigned char interruptRegister;
+ unsigned char interruptMask;
+
+ /* This is the RMI function descriptor associated with this function.
+ * It contains the Base addresses for the functions query, command,
+ * control, and data registers.
+ */
+ struct rmi_function_descriptor funcDescriptor;
+
+ /* pointer to data specific to a functions implementation. */
+ void *fndata;
+
+ /* A list of the function information.
+ * This list uses the standard kernel linked list implementation.
+ * Documentation on on how to use it can be found at
+ * http://isis.poly.edu/kulesh/stuff/src/klist/.
+ */
+ struct list_head link;
+};
+
+
+/* This struct is for creating a list of RMI4 functions that have data sources
+associated with them. This is to facilitate adding new support for other
+data sources besides 2D sensors.
+To add a new data source support, the developer will create a new file
+and add these 4 functions below with FN$## in front of the names - where
+## is the hex number for the function taken from the RMI4 specification.
+
+The function number will be associated with this and later will be used to
+match the RMI4 function to the 4 functions for that RMI4 function number.
+The user will also have to add code that adds the new rmi_functions item
+to the global list of RMI4 functions and stores the pointers to the 4
+functions in the function pointers.
+ */
+struct rmi_functions {
+ unsigned char functionNum;
+
+ /* Pointers to function specific functions for interruptHandler, config, init
+ , detect and attention. */
+ /* These ptrs. need to be filled in for every RMI4 function that has
+ data source(s) associated with it - like fn $11 (2D sensors),
+ fn $19 (buttons), etc. Each RMI4 function that has data sources
+ will be added into a list that is used to match the function
+ number against the number stored here.
+ */
+ /* The sensor implementation will call this whenever and IRQ is
+ * dispatched that this function is interested in.
+ */
+ void (*inthandler)(struct rmi_function_info *rfi, unsigned int assertedIRQs);
+
+ int (*config)(struct rmi_function_info *rmifninfo);
+ int (*init)(struct rmi_function_device *function_device);
+ int (*detect)(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr,
+ unsigned int interruptCount);
+ /** If this is non-null, the sensor implemenation will call this
+ * whenever the ATTN line is asserted.
+ */
+ void (*attention)(struct rmi_function_info *rmifninfo);
+
+
+ /* Standard kernel linked list implementation.
+ * Documentation on how to use it can be found at
+ * http://isis.poly.edu/kulesh/stuff/src/klist/.
+ */
+ struct list_head link;
+};
+
+
+typedef void(*inthandlerFuncPtr)(struct rmi_function_info *rfi, unsigned int assertedIRQs);
+typedef int(*configFuncPtr)(struct rmi_function_info *rmifninfo);
+typedef int(*initFuncPtr)(struct rmi_function_device *function_device);
+typedef int(*detectFuncPtr)(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr,
+ unsigned int interruptCount);
+typedef void (*attnFuncPtr)(struct rmi_function_info *rmifninfo);
+
+struct rmi_functions_data {
+ int functionNumber;
+ inthandlerFuncPtr inthandlerFn;
+ configFuncPtr configFn;
+ initFuncPtr initFn;
+ detectFuncPtr detectFn;
+ attnFuncPtr attnFn;
+};
+
+
+struct rmi_functions *rmi_find_function(int functionNum);
+int rmi_functions_init(struct input_dev *inputdev);
+
+struct rmi_function_driver {
+ struct module *module;
+ struct device_driver drv;
+
+ /* Probe Function
+ * This function is called to give the function driver layer an
+ * opportunity to claim an RMI function.
+ */
+ int (*probe)(struct rmi_function_driver *function);
+ /* Config Function
+ * This function is called after a successful probe. It gives the
+ * function driver an opportunity to query and/or configure an RMI
+ * function before data starts flowing.
+ */
+ void (*config)(struct rmi_function_driver *function);
+
+ unsigned short functionQueryBaseAddr; /* RMI4 function control */
+ unsigned short functionControlBaseAddr;
+ unsigned short functionCommandBaseAddr;
+ unsigned short functionDataBaseAddr;
+ unsigned int interruptRegisterOffset; /* offset from start of interrupt registers */
+ unsigned int interruptMask;
+
+ /* pointer to the corresponding phys driver info for this sensor */
+ /* The phys driver has the pointers to read, write, etc. */
+ /* Probably don't need it here - used down in bus driver and sensor driver */
+ struct rmi_phys_driver *rpd;
+
+ /* Standard kernel linked list implementation.
+ * Documentation on how to use it can be found at
+ * http://isis.poly.edu/kulesh/stuff/src/klist/.
+ */
+ struct list_head function_drivers; /* link function drivers into list */
+};
+
+struct rmi_function_device {
+ struct rmi_function_driver *function;
+ struct device dev;
+ struct input_dev *input;
+ struct rmi_sensor_driver *sensor; /* need this to be bound to phys driver layer */
+
+ /* the function ptrs to the config, init, detect and
+ report fns for this rmi function device. */
+ struct rmi_functions *rmi_funcs;
+ struct rmi_function_info *rfi;
+
+ /** An RMI sensor might actually have several IRQ registers -
+ * this tells us which IRQ register this function is interested in.
+ */
+ unsigned int irqRegisterSet;
+
+ /** This is a mask of the IRQs the function is interested in.
+ */
+ unsigned int irqMask;
+
+ /* Standard kernel linked list implementation.
+ * Documentation on how to use it can be found at
+ * http://isis.poly.edu/kulesh/stuff/src/klist/.
+ */
+ struct list_head functions; /* link functions into list */
+};
+
+int rmi_function_register_device(struct rmi_function_device *dev, int fnNumber);
+
+#endif
diff --git a/drivers/input/touchscreen/synaptics/rmi_i2c.c b/drivers/input/touchscreen/synaptics/rmi_i2c.c
new file mode 100644
index 0000000..1932b9b
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_i2c.c
@@ -0,0 +1,633 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) I2C Physical Layer Driver.
+ * Copyright (c) 2007-2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/input/rmi_platformdata.h>
+#include <linux/input/rmi_i2c.h>
+
+#include "rmi_drvr.h"
+
+#define DRIVER_NAME "rmi4_ts"
+
+#define DEVICE_NAME "rmi4_ts"
+
+/* Used to lock access to the page address.*/
+/* TODO: for multiple device support will need a per-device mutex */
+static DEFINE_MUTEX(page_mutex);
+
+
+static const struct i2c_device_id rmi_i2c_id_table[] = {
+ { DEVICE_NAME, 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, rmi_i2c_id_table);
+
+
+/* Used to count the number of I2C modules we get.
+ */
+static int device_count;
+
+
+/*
+ * This is the data kept on a per instance (client) basis. This data is
+ * always accessible by using the container_of() macro of the various elements
+ * inside.
+ */
+struct instance_data {
+ int instance_no;
+ int irq;
+ struct rmi_phys_driver rmiphysdrvr;
+ struct i2c_client *i2cclient; /* pointer to i2c_client for later use in
+ read, write, read_multiple, etc. */
+ int page;
+};
+
+/*
+ * RMI devices have 16-bit addressing, but some of the physical
+ * implementations (like SMBus) only have 8-bit addressing. So RMI implements
+ * a page address at 0xff of every page so we can reliable page addresses
+ * every 256 registers. This function sets the page.
+ *
+ * The page_mutex lock must be held when this function is entered.
+ *
+ * param[in] id - The pointer to the instance_data struct
+ * param[in] page - The new page address.
+ * returns zero on success, non-zero on failure.
+ */
+/** Writing to page select is giving errors in some configurations. It's
+ * not needed for basic operation, so we've turned it off for the moment.
+ */
+#if defined(USE_PAGESELECT)
+int
+rmi_set_page(struct instance_data *instancedata, unsigned int page)
+{
+ char txbuf[2];
+ int retval;
+ txbuf[0] = 0xff;
+ txbuf[1] = page;
+ retval = i2c_master_send(instancedata->i2cclient, txbuf, 2);
+ if (retval != 2) {
+ dev_err(&instancedata->i2cclient->dev,
+ "%s: Set page failed: %d.", __func__, retval);
+ } else {
+ retval = 0;
+ instancedata->page = page;
+ }
+ return retval;
+}
+#else
+int
+rmi_set_page(struct instance_data *instancedata, unsigned int page)
+{
+ return 0;
+}
+#endif
+
+/*
+ * Read a single register through i2c.
+ *
+ * param[in] pd - The pointer to the rmi_phys_driver struct
+ * param[in] address - The address at which to start the data read.
+ * param[out] valp - Pointer to the buffer where the data will be stored.
+ * returns zero upon success (with the byte read in valp), non-zero upon error.
+ */
+static int
+rmi_i2c_read(struct rmi_phys_driver *physdrvr, unsigned short address, char *valp)
+{
+ struct instance_data *instancedata =
+ container_of(physdrvr, struct instance_data, rmiphysdrvr);
+
+ char txbuf[2];
+ int retval = 0;
+ int retry_count = 0;
+
+ /* Can't have anyone else changing the page behind our backs */
+ mutex_lock(&page_mutex);
+
+ if (((address >> 8) & 0xff) != instancedata->page) {
+ /* Switch pages */
+ retval = rmi_set_page(instancedata, ((address >> 8) & 0xff));
+ if (retval)
+ goto exit;
+ }
+
+retry:
+ txbuf[0] = address & 0xff;
+ retval = i2c_master_send(instancedata->i2cclient, txbuf, 1);
+
+ if (retval != 1) {
+ dev_err(&instancedata->i2cclient->dev, "%s: Write fail: %d\n",
+ __func__, retval);
+ goto exit;
+ }
+ retval = i2c_master_recv(instancedata->i2cclient, txbuf, 1);
+
+ if (retval != 1) {
+ if (++retry_count == 5) {
+ dev_err(&instancedata->i2cclient->dev,
+ "%s: Read of 0x%04x fail: %d\n",
+ __func__, address, retval);
+ } else {
+ mdelay(10);
+ rmi_set_page(instancedata, ((address >> 8) & 0xff));
+ goto retry;
+ }
+ } else {
+ retval = 0;
+ *valp = txbuf[0];
+ }
+exit:
+
+ mutex_unlock(&page_mutex);
+ return retval;
+}
+
+/*
+ * Same as rmi_i2c_read, except that multiple bytes are allowed to be read.
+ *
+ * param[in] pd - The pointer to the rmi_phys_driver struct
+ * param[in] address - The address at which to start the data read.
+ * param[out] valp - Pointer to the buffer where the data will be stored. This
+ * buffer must be at least size bytes long.
+ * param[in] size - The number of bytes to be read.
+ * returns zero upon success (with the byte read in valp), non-zero upon error.
+ *
+ */
+static int
+rmi_i2c_read_multiple(struct rmi_phys_driver *physdrvr, unsigned short address,
+ char *valp, int size)
+{
+ struct instance_data *instancedata =
+ container_of(physdrvr, struct instance_data, rmiphysdrvr);
+
+ char txbuf[2];
+ int retval = 0;
+ int retry_count = 0;
+
+ /* Can't have anyone else changing the page behind our backs */
+ mutex_lock(&page_mutex);
+
+ if (((address >> 8) & 0xff) != instancedata->page) {
+ /* Switch pages */
+ retval = rmi_set_page(instancedata, ((address >> 8) & 0xff));
+ if (retval)
+ goto exit;
+ }
+
+retry:
+ txbuf[0] = address & 0xff;
+ retval = i2c_master_send(instancedata->i2cclient, txbuf, 1);
+
+ if (retval != 1) {
+ dev_err(&instancedata->i2cclient->dev, "%s: Write fail: %d\n",
+ __func__, retval);
+ goto exit;
+ }
+ retval = i2c_master_recv(instancedata->i2cclient, valp, size);
+
+ if (retval != size) {
+ if (++retry_count == 5) {
+ dev_err(&instancedata->i2cclient->dev,
+ "%s: Read of 0x%04x size %d fail: %d\n",
+ __func__, address, size, retval);
+ } else {
+ mdelay(10);
+ rmi_set_page(instancedata, ((address >> 8) & 0xff));
+ goto retry;
+ }
+ } else {
+ retval = 0;
+ }
+exit:
+
+ mutex_unlock(&page_mutex);
+ return retval;
+}
+
+
+/*
+ * Write a single register through i2c.
+ * You can write multiple registers at once, but I made the functions for that
+ * seperate for performance reasons. Writing multiple requires allocation and
+ * freeing.
+ *
+ * param[in] pd - The pointer to the rmi_phys_driver struct
+ * param[in] address - The address at which to start the write.
+ * param[in] data - The data to be written.
+ * returns one upon success, something else upon error.
+ */
+static int
+rmi_i2c_write(struct rmi_phys_driver *physdrvr, unsigned short address, char data)
+{
+ struct instance_data *instancedata =
+ container_of(physdrvr, struct instance_data, rmiphysdrvr);
+
+ unsigned char txbuf[2];
+ int retval = 0;
+
+ /* Can't have anyone else changing the page behind our backs */
+ mutex_lock(&page_mutex);
+
+ if (((address >> 8) & 0xff) != instancedata->page) {
+ /* Switch pages */
+ retval = rmi_set_page(instancedata, ((address >> 8) & 0xff));
+ if (retval)
+ goto exit;
+ }
+
+ txbuf[0] = address & 0xff;
+ txbuf[1] = data;
+ retval = i2c_master_send(instancedata->i2cclient, txbuf, 2);
+
+ /* TODO: Add in retry on writes only in certian error return values */
+ if (retval != 2) {
+ dev_err(&instancedata->i2cclient->dev, "%s: Write fail: %d\n",
+ __func__, retval);
+ goto exit; /* Leave this in case we add code below */
+ } else {
+ retval = 1;
+ }
+exit:
+
+ mutex_unlock(&page_mutex);
+ return retval;
+}
+
+/*
+ * Write multiple registers.
+ *
+ * For fast writes of 16 bytes of less we will re-use a buffer on the stack.
+ * For larger writes (like for RMI reflashing) we will need to allocate a
+ * temp buffer.
+ *
+ * param[in] pd - The pointer to the rmi_phys_driver struct
+ * param[in] address - The address at which to start the write.
+ * param[in] valp - A pointer to a buffer containing the data to be written.
+ * param[in] size - The number of bytes to write.
+ * returns one upon success, something else upon error.
+ */
+static int
+rmi_i2c_write_multiple(struct rmi_phys_driver *physdrvr, unsigned short address,
+ char *valp, int size)
+{
+ struct instance_data *instancedata =
+ container_of(physdrvr, struct instance_data, rmiphysdrvr);
+
+ unsigned char *txbuf;
+ unsigned char txbuf_most[17]; /* Use this buffer for fast writes of 16
+ bytes or less. The first byte will
+ contain the address at which to start
+ the write. */
+ int retval = 0;
+ int i;
+
+ if (size < sizeof(txbuf_most)) {
+ /* Avoid an allocation if we can help it. */
+ txbuf = txbuf_most;
+ } else {
+ /* over 16 bytes write we'll need to allocate a temp buffer */
+ txbuf = kzalloc(size + 1, GFP_KERNEL);
+ if (!txbuf)
+ return -ENOMEM;
+ }
+
+ /* Yes, it stinks here that we have to copy the buffer */
+ /* We copy from valp to txbuf leaving
+ the first location open for the address */
+ for (i = 0; i < size; i++)
+ txbuf[i + 1] = valp[i];
+
+ /* Can't have anyone else changing the page behind our backs */
+ mutex_lock(&page_mutex);
+
+ if (((address >> 8) & 0xff) != instancedata->page) {
+ /* Switch pages */
+ retval = rmi_set_page(instancedata, ((address >> 8) & 0xff));
+ if (retval)
+ goto exit;
+ }
+
+ txbuf[0] = address & 0xff; /* put the address in the first byte */
+ retval = i2c_master_send(instancedata->i2cclient, txbuf, size + 1);
+
+ /* TODO: Add in retyr on writes only in certian error return values */
+ if (retval != 1) {
+ dev_err(&instancedata->i2cclient->dev, "%s: Write fail: %d\n",
+ __func__, retval);
+ goto exit;
+ }
+exit:
+
+ mutex_unlock(&page_mutex);
+ if (txbuf != txbuf_most)
+ kfree(txbuf);
+ return retval;
+}
+
+/*
+ * This is the Interrupt Service Routine. It just notifies the application
+ * layer that attention is required.
+ */
+static irqreturn_t
+i2c_attn_isr(int irq, void *info)
+{
+ struct instance_data *instancedata = info;
+
+ disable_irq_nosync(instancedata->irq);
+
+ if (instancedata->rmiphysdrvr.attention) {
+ instancedata->rmiphysdrvr.attention(&instancedata->rmiphysdrvr,
+ instancedata->instance_no);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/* The Driver probe function - will allocate and initialize the instance
+ * data and request the irq and set the instance data as the clients
+ * platform data then register the physical driver which will do a scan of
+ * the RMI4 Physical Device Table and enumerate any RMI4 functions that
+ * have data sources associated with them.
+ */
+static int
+rmi_i2c_probe(struct i2c_client *client, const struct i2c_device_id *dev_id)
+{
+
+ struct instance_data *instancedata;
+ int retval = 0;
+ int irqtype = 0;
+
+ struct rmi_i2c_platformdata *platformdata;
+ struct rmi_sensordata *sensordata;
+
+ if (client == NULL) {
+ printk(KERN_ERR "%s: Invalid NULL client received.", __func__);
+ return -EINVAL;
+ }
+
+ printk(KERN_DEBUG "%s: Probing i2c RMI device, addr: 0x%02x", __func__, client->addr);
+
+
+ /* Allocate and initialize the instance data for this client */
+ instancedata = kzalloc(sizeof(*instancedata), GFP_KERNEL);
+ if (!instancedata) {
+ dev_err(&client->dev,
+ "%s: Out of memory trying to allocate instance_data.\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ instancedata->rmiphysdrvr.name = DRIVER_NAME;
+ instancedata->rmiphysdrvr.write = rmi_i2c_write;
+ instancedata->rmiphysdrvr.read = rmi_i2c_read;
+ instancedata->rmiphysdrvr.write_multiple = rmi_i2c_write_multiple;
+ instancedata->rmiphysdrvr.read_multiple = rmi_i2c_read_multiple;
+ instancedata->rmiphysdrvr.module = THIS_MODULE;
+
+ /* Set default to polling in case no matching platform data is located
+ for this device. We'll still work but in polling mode since we didn't
+ find any irq info */
+ instancedata->rmiphysdrvr.polling_required = true;
+
+ instancedata->page = 0xffff; /* Force a set page the first time */
+
+ /* cast to our struct rmi_i2c_platformdata so we know
+ the fields (see rmi_ic2.h) */
+ platformdata = client->dev.platform_data;
+ if (platformdata == NULL) {
+ printk(KERN_ERR "%s: CONFIGURATION ERROR - platform data is NULL.", __func__);
+ return -EINVAL;
+ }
+ sensordata = platformdata->sensordata;
+
+ /* Egregiously horrible delay here that seems to prevent I2C disasters on
+ * certain broken dev systems. In most cases, you can safely leave this
+ * as zero.
+ */
+ if (platformdata->delay_ms > 0)
+ mdelay(platformdata->delay_ms);
+
+ /* Call the platform setup routine, to do any setup that is required before
+ * interacting with the device.
+ */
+ if (sensordata && sensordata->rmi_sensor_setup) {
+ retval = sensordata->rmi_sensor_setup();
+ if (retval) {
+ printk(KERN_ERR "%s: sensor setup failed with code %d.", __func__, retval);
+ return retval;
+ }
+ }
+
+ printk(KERN_DEBUG "%s: sensor addr: 0x%02x irq: 0x%x type: %d",
+ __func__, platformdata->i2c_address, platformdata->irq, platformdata->irq_type);
+ if (client->addr != platformdata->i2c_address) {
+ printk(KERN_ERR "%s: CONFIGURATION ERROR - client I2C address 0x%02x doesn't match platform data address 0x%02x.", __func__, client->addr, platformdata->i2c_address);
+ return -EINVAL;
+ }
+
+ instancedata->instance_no = device_count++;
+
+ /* set the device name using the instance_no appended
+ to DEVICE_NAME to make a unique name */
+ dev_set_name(&client->dev,
+ "rmi4-i2c%d", instancedata->instance_no);
+
+ /* Determine if we need to poll (inefficient) or use interrupts.
+ */
+ if (platformdata->irq) {
+ instancedata->irq = platformdata->irq;
+ switch (platformdata->irq_type) {
+ case IORESOURCE_IRQ_HIGHEDGE:
+ irqtype = IRQF_TRIGGER_RISING;
+ break;
+ case IORESOURCE_IRQ_LOWEDGE:
+ irqtype = IRQF_TRIGGER_FALLING;
+ break;
+ case IORESOURCE_IRQ_HIGHLEVEL:
+ irqtype = IRQF_TRIGGER_HIGH;
+ break;
+ case IORESOURCE_IRQ_LOWLEVEL:
+ irqtype = IRQF_TRIGGER_LOW;
+ break;
+ default:
+ dev_warn(&client->dev,
+ "%s: Invalid IRQ flags in platform data.\n",
+ __func__);
+ kfree(instancedata);
+ return -ENXIO;
+ }
+
+ instancedata->rmiphysdrvr.polling_required = false;
+ instancedata->rmiphysdrvr.irq = instancedata->irq;
+
+ } else {
+ instancedata->rmiphysdrvr.polling_required = true;
+ dev_info(&client->dev,
+ "%s: No IRQ info given. Polling required.\n",
+ __func__);
+ }
+
+ /* Store the instance data in the i2c_client - we need to do this prior
+ * to calling register_physical_driver since it may use the read, write
+ * functions. If nothing was found then the id fields will be set to 0
+ * for the irq and the default will be set to polling required so we
+ * will still work but in polling mode. */
+ i2c_set_clientdata(client, instancedata);
+
+ /* Copy i2c_client pointer into instance_data's i2c_client pointer for
+ later use in rmi4_read, rmi4_write, etc. */
+ instancedata->i2cclient = client;
+
+ /* Register sensor drivers - this will call the detect function that
+ * will then scan the device and determine the supported RMI4 sensors
+ * and functions.
+ */
+ retval = rmi_register_sensor(&instancedata->rmiphysdrvr, platformdata->sensordata);
+ if (retval) {
+ dev_err(&client->dev, "%s: Failed to Register %s sensor drivers\n",
+ __func__, instancedata->rmiphysdrvr.name);
+ i2c_set_clientdata(client, NULL);
+ kfree(instancedata);
+ return retval;
+ }
+
+ if (instancedata->rmiphysdrvr.polling_required == false) {
+ retval = request_irq(instancedata->irq, i2c_attn_isr,
+ irqtype, "rmi_i2c", instancedata);
+ if (retval) {
+ dev_err(&client->dev, "%s: failed to obtain IRQ %d. Result: %d.",
+ __func__, instancedata->irq, retval);
+ dev_info(&client->dev, "%s: Reverting to polling.\n", __func__);
+ instancedata->rmiphysdrvr.polling_required = true;
+ /* TODO: Need to revert back to polling - create and start timer. */
+ } else {
+ dev_dbg(&client->dev, "%s: got irq.\n", __func__);
+ }
+ }
+
+ dev_dbg(&client->dev, "%s: Successfully registered %s sensor driver.\n",
+ __func__, instancedata->rmiphysdrvr.name);
+
+ printk(KERN_INFO "%s: Successfully registered %s sensor driver.\n", __func__, instancedata->rmiphysdrvr.name);
+
+ return retval;
+}
+
+/* The Driver remove function. We tear down the instance data and unregister
+ * the phys driver in this call.
+ */
+static int
+rmi_i2c_remove(struct i2c_client *client)
+{
+ struct instance_data *instancedata =
+ i2c_get_clientdata(client);
+
+ dev_dbg(&client->dev, "%s: Unregistering phys driver %s\n", __func__,
+ instancedata->rmiphysdrvr.name);
+
+ rmi_unregister_sensors(&instancedata->rmiphysdrvr);
+
+ dev_dbg(&client->dev, "%s: Unregistered phys driver %s\n",
+ __func__, instancedata->rmiphysdrvr.name);
+
+ /* only free irq if we have an irq - otherwise the instance_data
+ will be 0 for that field */
+ if (instancedata->irq)
+ free_irq(instancedata->irq, instancedata);
+
+ kfree(instancedata);
+ dev_dbg(&client->dev, "%s: Remove successful\n", __func__);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int
+rmi_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ /* Touch sleep mode */
+ return 0;
+}
+
+static int
+rmi_i2c_resume(struct i2c_client *client)
+{
+ /* Re-initialize upon resume */
+ return 0;
+}
+#else
+#define rmi_i2c_suspend NULL
+#define rmi_i2c_resume NULL
+#endif
+
+/*
+ * This structure tells the i2c subsystem about us.
+ *
+ * TODO: we should add .suspend and .resume fns.
+ *
+ */
+static struct i2c_driver rmi_i2c_driver = {
+ .probe = rmi_i2c_probe,
+ .remove = rmi_i2c_remove,
+ .suspend = rmi_i2c_suspend,
+ .resume = rmi_i2c_resume,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .id_table = rmi_i2c_id_table,
+};
+
+/*
+ * Register ourselves with i2c Chip Driver.
+ *
+ */
+static int __init rmi_phys_i2c_init(void)
+{
+ return i2c_add_driver(&rmi_i2c_driver);
+}
+
+/*
+ * Un-register ourselves from the i2c Chip Driver.
+ *
+ */
+static void __exit rmi_phys_i2c_exit(void)
+{
+ i2c_del_driver(&rmi_i2c_driver);
+}
+
+
+module_init(rmi_phys_i2c_init);
+module_exit(rmi_phys_i2c_exit);
+
+MODULE_AUTHOR("Synaptics, Inc.");
+MODULE_DESCRIPTION("RMI4 Driver I2C Physical Layer");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/synaptics/rmi_sensor.c b/drivers/input/touchscreen/synaptics/rmi_sensor.c
new file mode 100644
index 0000000..da8a93d
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_sensor.c
@@ -0,0 +1,661 @@
+/**
+ * Synaptics Register Mapped Interface (RMI4) - RMI Sensor Module.
+ * Copyright (C) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *############################################################################
+ */
+
+static const char sensorname[] = "sensor";
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/hrtimer.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+
+
+#include "rmi_drvr.h"
+#include "rmi_bus.h"
+#include "rmi_function.h"
+#include "rmi_sensor.h"
+
+long polltime = 25000000; /* Shared with rmi_function.c. */
+EXPORT_SYMBOL(polltime);
+module_param(polltime, long, 0644);
+MODULE_PARM_DESC(polltime, "How long to wait between polls (in nano seconds).");
+
+
+#define PDT_START_SCAN_LOCATION 0x00E9
+#define PDT_END_SCAN_LOCATION 0x0005
+#define PDT_ENTRY_SIZE 0x0006
+
+static DEFINE_MUTEX(rfi_mutex);
+
+struct rmi_functions *rmi_find_function(int functionNum);
+
+int rmi_read(struct rmi_sensor_driver *sensor, unsigned short address,
+ char *dest)
+{
+ struct rmi_phys_driver *rpd = sensor->rpd;
+ if (!rpd)
+ return -ENODEV;
+ return rpd->read(rpd, address, dest);
+}
+EXPORT_SYMBOL(rmi_read);
+
+int rmi_write(struct rmi_sensor_driver *sensor, unsigned short address,
+ unsigned char data)
+{
+ struct rmi_phys_driver *rpd = sensor->rpd;
+ if (!rpd)
+ return -ENODEV;
+ return rpd->write(rpd, address, data);
+}
+EXPORT_SYMBOL(rmi_write);
+
+int rmi_read_multiple(struct rmi_sensor_driver *sensor,
+ unsigned short address, char *dest, int length)
+{
+ struct rmi_phys_driver *rpd = sensor->rpd;
+ if (!rpd)
+ return -ENODEV;
+ return rpd->read_multiple(rpd, address, dest, length);
+}
+EXPORT_SYMBOL(rmi_read_multiple);
+
+int rmi_write_multiple(struct rmi_sensor_driver *sensor,
+ unsigned short address, unsigned char *data, int length)
+{
+ struct rmi_phys_driver *rpd = sensor->rpd;
+ if (!rpd)
+ return -ENODEV;
+ return rpd->write_multiple(rpd, address, data, length);
+}
+EXPORT_SYMBOL(rmi_write_multiple);
+
+/* Utility routine to set bits in a register. */
+int rmi_set_bits(struct rmi_sensor_driver *sensor, unsigned short address,
+ unsigned char bits)
+{
+ unsigned char reg_contents;
+ int retval;
+
+ retval = rmi_read(sensor, address, ®_contents);
+ if (retval)
+ return retval;
+ reg_contents = reg_contents | bits;
+ retval = rmi_write(sensor, address, reg_contents);
+ if (retval == 1)
+ return 0;
+ else if (retval == 0)
+ return -EINVAL; /* TODO: What should this be? */
+ else
+ return retval;
+}
+EXPORT_SYMBOL(rmi_set_bits);
+
+/* Utility routine to clear bits in a register. */
+int rmi_clear_bits(struct rmi_sensor_driver *sensor,
+ unsigned short address, unsigned char bits)
+{
+ unsigned char reg_contents;
+ int retval;
+
+ retval = rmi_read(sensor, address, ®_contents);
+ if (retval)
+ return retval;
+ reg_contents = reg_contents & ~bits;
+ retval = rmi_write(sensor, address, reg_contents);
+ if (retval == 1)
+ return 0;
+ else if (retval == 0)
+ return -EINVAL; /* TODO: What should this be? */
+ else
+ return retval;
+}
+EXPORT_SYMBOL(rmi_clear_bits);
+
+/* Utility routine to set the value of a bit field in a register. */
+int rmi_set_bit_field(struct rmi_sensor_driver *sensor,
+ unsigned short address, unsigned char field_mask, unsigned char bits)
+{
+ unsigned char reg_contents;
+ int retval;
+
+ retval = rmi_read(sensor, address, ®_contents);
+ if (retval)
+ return retval;
+ reg_contents = (reg_contents & ~field_mask) | bits;
+ retval = rmi_write(sensor, address, reg_contents);
+ if (retval == 1)
+ return 0;
+ else if (retval == 0)
+ return -EINVAL; /* TODO: What should this be? */
+ else
+ return retval;
+}
+EXPORT_SYMBOL(rmi_set_bit_field);
+
+bool rmi_polling_required(struct rmi_sensor_driver *sensor)
+{
+ return sensor->polling_required;
+}
+EXPORT_SYMBOL(rmi_polling_required);
+
+/** Functions can call this in order to dispatch IRQs. */
+void dispatchIRQs(struct rmi_sensor_driver *sensor, unsigned int irqStatus)
+{
+ struct rmi_function_info *functionInfo;
+
+ list_for_each_entry(functionInfo, &sensor->functions, link) {
+ if ((functionInfo->interruptMask & irqStatus)) {
+ if (functionInfo->function_device->
+ rmi_funcs->inthandler) {
+ /* Call the functions interrupt handler function. */
+ functionInfo->function_device->rmi_funcs->
+ inthandler(functionInfo,
+ (functionInfo->interruptMask & irqStatus));
+ }
+ }
+ }
+}
+
+/**
+ * This is the function we pass to the RMI4 subsystem so we can be notified
+ * when attention is required. It may be called in interrupt context.
+ */
+static void attention(struct rmi_phys_driver *physdrvr, int instance)
+{
+ /* All we have to do is schedule work. */
+
+ /* TODO: It's possible that workIsReady is not really needed anymore.
+ * Investigate this to see if the race condition between setting up
+ * the work and enabling the interrupt still exists.
+ */
+ if (physdrvr->sensor->workIsReady) {
+ schedule_work(&(physdrvr->sensor->work));
+ } else {
+ /* Got an interrupt but we're not ready so enable the irq
+ * so it doesn't get hung up
+ */
+ printk(KERN_DEBUG "%s: Work not initialized yet -"
+ "enabling irqs.\n", __func__);
+ enable_irq(physdrvr->irq);
+ }
+}
+
+/**
+ * This notifies any interested functions that there
+ * is an Attention interrupt. The interested functions should take
+ * appropriate
+ * actions (such as reading the interrupt status register and dispatching any
+ * appropriate RMI4 interrupts).
+ */
+void attn_notify(struct rmi_sensor_driver *sensor)
+{
+ struct rmi_function_info *functionInfo;
+
+ /* check each function that has data sources and if the interrupt for
+ * that triggered then call that RMI4 functions report() function to
+ * gather data and report it to the input subsystem
+ */
+ list_for_each_entry(functionInfo, &sensor->functions, link) {
+ if (functionInfo->function_device &&
+ functionInfo->function_device->rmi_funcs->attention)
+ functionInfo->function_device->
+ rmi_funcs->attention(functionInfo);
+ }
+}
+
+/* This is the worker function - for now it simply has to call attn_notify.
+ * This work should be scheduled whenever an ATTN interrupt is asserted by
+ * the touch sensor.
+ * We then call attn_notify to dispatch notification of the ATTN interrupt
+ * to all
+ * interested functions. After all the attention handling functions
+ * have returned, it is presumed safe to re-enable the Attention interrupt.
+ */
+static void sensor_work_func(struct work_struct *work)
+{
+ struct rmi_sensor_driver *sensor = container_of(work,
+ struct rmi_sensor_driver, work);
+
+ attn_notify(sensor);
+
+ /* we only need to enable the irq if doing interrupts */
+ if (!rmi_polling_required(sensor))
+ enable_irq(sensor->rpd->irq);
+}
+
+/* This is the timer function for polling - it simply has to schedule work
+ * and restart the timer. */
+static enum hrtimer_restart sensor_poll_timer_func(struct hrtimer *timer)
+{
+ struct rmi_sensor_driver *sensor = container_of(timer,
+ struct rmi_sensor_driver, timer);
+
+ schedule_work(&sensor->work);
+ hrtimer_start(&sensor->timer, ktime_set(0, polltime),
+ HRTIMER_MODE_REL);
+ return HRTIMER_NORESTART;
+}
+
+/* This is the probe function passed to the RMI4 subsystem that gives us a
+ * chance to recognize an RMI4 device. In this case, we're looking for
+ * Synaptics devices that have data sources - such as touch screens, buttons,
+ * etc.
+ *
+ * TODO: Well, it used to do this. I'm not sure it's required any more.
+ */
+static int probe(struct rmi_sensor_driver *sensor)
+{
+ struct rmi_phys_driver *rpd;
+
+ rpd = sensor->rpd;
+
+ if (!rpd) {
+ printk(KERN_ERR "%s: Invalid rmi physical driver - null ptr:"
+ "%p\n", __func__, rpd);
+ return 0;
+ }
+
+ return 1;
+}
+
+static void config(struct rmi_sensor_driver *sensor)
+{
+ /* For each data source we had detected print info and set up interrupts
+ or polling. */
+ struct rmi_function_info *functionInfo;
+ struct rmi_phys_driver *rpd;
+
+ rpd = sensor->rpd; /* get ptr to rmi_physical_driver from app */
+
+ list_for_each_entry(functionInfo, &sensor->functions, link) {
+ /* Get and print some info about the data sources... */
+ struct rmi_functions *fn;
+ bool found = false;
+ /* check if function number matches - if so call that
+ config function */
+ fn = rmi_find_function(functionInfo->functionNum);
+ if (fn) {
+ found = true;
+
+ if (fn->config) {
+ fn->config(functionInfo);
+ } else {
+ /* the developer did not add in the
+ pointer to the config function into
+ rmi4_supported_data_src_functions */
+ printk(KERN_ERR
+ "%s: no config function for "
+ "function 0x%x\n",
+ __func__, functionInfo->functionNum);
+ break;
+ }
+ }
+
+ if (!found) {
+ /* if no support found for this RMI4 function
+ it means the developer did not add the
+ appropriate function pointer list into the
+ rmi4_supported_data_src_functions array and/or
+ did not bump up the number of supported RMI4
+ functions in rmi.h as required */
+ printk(KERN_ERR "%s: could not find support "
+ "for function 0x%x\n",
+ __func__, functionInfo->functionNum);
+ }
+ }
+
+ /* This will handle interrupts on the ATTN line (interrupt driven)
+ * or will be called every poll interval (when we're not interrupt
+ * driven).
+ */
+ INIT_WORK(&sensor->work, sensor_work_func);
+ sensor->workIsReady = true;
+
+ if (rmi_polling_required(sensor)) {
+ /* We're polling driven, so set up the polling timer
+ and timer function. */
+ hrtimer_init(&sensor->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ sensor->timer.function = sensor_poll_timer_func;
+ hrtimer_start(&sensor->timer, ktime_set(1, 0), HRTIMER_MODE_REL);
+ }
+}
+
+/** Just a stub for now.
+ */
+static int rmi_sensor_suspend(struct device *dev, pm_message_t state)
+{
+ printk(KERN_INFO "%s: sensor suspend called.", __func__);
+ return 0;
+}
+
+/** Just a stub for now.
+ */
+static int rmi_sensor_resume(struct device *dev)
+{
+ printk(KERN_INFO "%s: sensor resume called.", __func__);
+ return 0;
+}
+
+/*
+ * This method is called, whenever a new sensor device is added for the rmi
+ * bus.
+ *
+ * It will scan the devices PDT to determine the supported functions
+ * and create a new function device for each of these. It will read
+ * the query, control, command and data regsiters for the function
+ * to be used for each newly created function device.
+ *
+ * The sensor device is then bound to every function it supports.
+ *
+ */
+int rmi_sensor_register_functions(struct rmi_sensor_driver *sensor)
+{
+ struct rmi_function_device *function;
+ unsigned int interruptRegisterCount;
+ struct rmi_phys_driver *rpd;
+ int i;
+ unsigned char interruptCount;
+ struct rmi_function_info *functionInfo;
+ struct rmi_function_descriptor rmi_fd;
+ struct rmi_functions *fn;
+ int retval;
+
+ pr_debug("%s: Registering sensor functions\n", __func__);
+
+ retval = 0;
+
+ /* Scan device for functions that may be supported */
+ {
+ pr_debug("%s: Scanning sensor for Functions:\n", __func__);
+
+ interruptCount = 0;
+ rpd = sensor->rpd;
+
+ /* Read the Page Descriptor Table to determine what functions
+ * are present */
+
+ printk(KERN_DEBUG "%s: Scanning page descriptors.", __func__);
+ for (i = PDT_START_SCAN_LOCATION;
+ i >= PDT_END_SCAN_LOCATION;
+ i -= PDT_ENTRY_SIZE) {
+ printk(KERN_DEBUG "%s: Reading page descriptor 0x%02x", __func__, i);
+ retval = rpd->read_multiple(rpd, i, (char *)&rmi_fd,
+ sizeof(rmi_fd));
+ if (!retval) {
+ functionInfo = NULL;
+
+ if (rmi_fd.functionNum != 0x00 && rmi_fd.functionNum != 0xff) {
+ printk(KERN_DEBUG "%s: F%02x - queries %02x commands %02x control %02x data %02x ints %02x", __func__, rmi_fd.functionNum, rmi_fd.queryBaseAddr, rmi_fd.commandBaseAddr, rmi_fd.controlBaseAddr, rmi_fd.dataBaseAddr, rmi_fd.interruptSrcCnt);
+
+ if ((rmi_fd.functionNum & 0xff) == 0x01)
+ printk(KERN_DEBUG "%s: Fn $01 Found - RMI Device Control", __func__);
+
+ /* determine if the function is supported and if so
+ * then bind this function device to the sensor */
+ if (rmi_fd.interruptSrcCnt) {
+ functionInfo = kzalloc(sizeof(*functionInfo), GFP_KERNEL);
+ if (!functionInfo) {
+ printk(KERN_ERR "%s: could not allocate memory for function 0x%x.",
+ __func__, rmi_fd.functionNum);
+ retval = -ENOMEM;
+ goto exit_fail;
+ }
+ functionInfo->sensor = sensor;
+ functionInfo->functionNum = (rmi_fd.functionNum & 0xff);
+ INIT_LIST_HEAD(&functionInfo->link);
+ /* Get the ptr to the detect function based on
+ * the function number */
+ printk(KERN_DEBUG "%s: Checking for RMI function F%02x.", __func__, rmi_fd.functionNum);
+ fn = rmi_find_function(rmi_fd.functionNum);
+ if (fn) {
+ retval = fn->detect(functionInfo, &rmi_fd,
+ interruptCount);
+ if (retval)
+ printk(KERN_ERR "%s: Function detect for F%02x failed with %d.",
+ __func__, rmi_fd.functionNum, retval);
+
+ /* Create a function device and function driver for this Fn */
+ function = kzalloc(sizeof(*function), GFP_KERNEL);
+ if (!function) {
+ printk(KERN_ERR "%s: Error allocating memory for rmi_function_device.", __func__);
+ return -ENOMEM;
+ }
+
+ function->dev.parent = &sensor->sensor_device->dev;
+ function->dev.bus = sensor->sensor_device->dev.bus;
+ function->rmi_funcs = fn;
+ function->sensor = sensor;
+ function->rfi = functionInfo;
+ functionInfo->function_device = function;
+
+ /* Check if we have an interrupt mask of 0 and a non-NULL interrupt
+ handler function and print a debug message since we should never
+ have this.
+ */
+ if (functionInfo->interruptMask == 0 && fn->inthandler != NULL) {
+ printk(KERN_DEBUG "%s: Can't have a zero interrupt mask for function F%02x (which requires an interrupt handler).\n",
+ __func__, rmi_fd.functionNum);
+ }
+
+
+ /* Check if we have a non-zero interrupt mask and a NULL interrupt
+ handler function and print a debug message since we should never
+ have this.
+ */
+ if (functionInfo->interruptMask != 0 && fn->inthandler == NULL) {
+ printk(KERN_DEBUG "%s: Can't have a non-zero interrupt mask %d for function F%02x with a NULL inthandler fn.\n",
+ __func__, functionInfo->interruptMask, rmi_fd.functionNum);
+ }
+
+ /* Register the rmi function device */
+ retval = rmi_function_register_device(function, rmi_fd.functionNum);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed rmi_function_register_device.\n",
+ __func__);
+ return retval;
+ }
+ } else {
+ printk(KERN_ERR "%s: could not find support for function 0x%02X.\n",
+ __func__, rmi_fd.functionNum);
+ }
+ } else {
+ printk(KERN_DEBUG "%s: Found function F%02x - Ignored.\n", __func__, rmi_fd.functionNum & 0xff);
+ }
+
+ /* bump interrupt count for next iteration */
+ /* NOTE: The value 7 is reserved - for now, only bump up one for an interrupt count of 7 */
+ if ((rmi_fd.interruptSrcCnt & 0x7) == 0x7) {
+ interruptCount += 1;
+ } else {
+ interruptCount +=
+ (rmi_fd.interruptSrcCnt & 0x7);
+ }
+
+ /* link this function info to the RMI module infos list
+ of functions */
+ if (functionInfo == NULL) {
+ printk(KERN_DEBUG "%s: WTF? functionInfo is null here.", __func__);
+ } else {
+ printk(KERN_DEBUG "%s: Adding function F%02x with %d sources.\n",
+ __func__, functionInfo->functionNum, functionInfo->numSources);
+
+ mutex_lock(&rfi_mutex);
+ list_add_tail(&functionInfo->link,
+ &sensor->functions);
+ mutex_unlock(&rfi_mutex);
+ }
+
+ } else {
+ /* A zero or 0xff in the function number
+ signals the end of the PDT */
+ printk(KERN_DEBUG "%s: Found End of PDT\n",
+ __func__);
+ break;
+ }
+ } else {
+ /* failed to read next PDT entry - end PDT
+ scan - this may result in an incomplete set
+ of recognized functions - should probably
+ return an error but the driver may still be
+ viable for diagnostics and debugging so let's
+ let it continue. */
+ printk(KERN_ERR "%s: Read Error %d when reading next PDT entry - "
+ "ending PDT scan.\n",
+ __func__, retval);
+ break;
+ }
+ }
+ printk(KERN_DEBUG "%s: Done scanning.", __func__);
+
+ /* calculate the interrupt register count - used in the
+ ISR to read the correct number of interrupt registers */
+ interruptRegisterCount = (interruptCount + 7) / 8;
+ sensor->interruptRegisterCount = interruptRegisterCount; /* TODO: Is this needed by the sensor anymore? */
+ }
+
+ return 0;
+
+exit_fail:
+ return retval;
+}
+EXPORT_SYMBOL(rmi_sensor_register_functions);
+
+int rmi_sensor_register_device(struct rmi_sensor_device *dev, int index)
+{
+ int status;
+
+ printk(KERN_INFO "%s: Registering sensor device.\n", __func__);
+
+ /* make name - sensor00, sensor01, etc. */
+ dev_set_name(&dev->dev, "sensor%02d", index);
+ status = device_register(&dev->dev);
+
+ return status;
+}
+EXPORT_SYMBOL(rmi_sensor_register_device);
+
+static void rmi_sensor_unregister_device(struct rmi_sensor_device *rmisensordev)
+{
+ printk(KERN_INFO "%s: Unregistering sensor device.\n", __func__);
+
+ device_unregister(&rmisensordev->dev);
+}
+EXPORT_SYMBOL(rmi_sensor_unregister_device);
+
+int rmi_sensor_register_driver(struct rmi_sensor_driver *driver)
+{
+ static int index;
+ int ret;
+ char *drvrname;
+
+ driver->workIsReady = false;
+
+ printk(KERN_INFO "%s: Registering sensor driver.\n", __func__);
+ driver->dispatchIRQs = dispatchIRQs;
+ driver->attention = attention;
+ driver->config = config;
+ driver->probe = probe;
+
+ /* assign the bus type for this driver to be rmi bus */
+ driver->drv.bus = &rmi_bus_type;
+ driver->drv.suspend = rmi_sensor_suspend;
+ driver->drv.resume = rmi_sensor_resume;
+ /* Create a function device and function driver for this Fn */
+ drvrname = kzalloc(sizeof(sensorname) + 4, GFP_KERNEL);
+ if (!drvrname) {
+ printk(KERN_ERR "%s: Error allocating memeory for rmi_sensor_driver name.\n", __func__);
+ return -ENOMEM;
+ }
+ sprintf(drvrname, "sensor%02d", index++);
+
+ driver->drv.name = drvrname;
+ driver->module = driver->drv.owner;
+
+ /* register the sensor driver */
+ ret = driver_register(&driver->drv);
+ if (ret) {
+ printk(KERN_ERR "%s: Failed driver_register %d\n",
+ __func__, ret);
+ goto exit_fail;
+ }
+
+ /* register the functions on the sensor */
+ ret = rmi_sensor_register_functions(driver);
+ if (ret) {
+ printk(KERN_ERR "%s: Failed rmi_sensor_register_functions %d\n",
+ __func__, ret);
+ }
+
+ /* configure the sensor - enable interrupts for each function, init work, set polling timer or adjust report rate, etc. */
+ config(driver);
+
+ printk(KERN_DEBUG "%s: sensor driver registration completed.", __func__);
+
+exit_fail:
+ return ret;
+}
+EXPORT_SYMBOL(rmi_sensor_register_driver);
+
+static void rmi_sensor_unregister_driver(struct rmi_sensor_driver *driver)
+{
+ printk(KERN_DEBUG "%s: Unregistering sensor driver.\n", __func__);
+
+ /* Stop the polling timer if doing polling */
+ if (rmi_polling_required(driver))
+ hrtimer_cancel(&driver->timer);
+
+ flush_scheduled_work(); /* Make sure all scheduled work is stopped */
+
+ driver_unregister(&driver->drv);
+}
+EXPORT_SYMBOL(rmi_sensor_unregister_driver);
+
+
+static int __init rmi_sensor_init(void)
+{
+ printk(KERN_DEBUG "%s: RMI Sensor Init\n", __func__);
+ return 0;
+}
+
+static void __exit rmi_sensor_exit(void)
+{
+ printk(KERN_DEBUG "%s: RMI Sensor Driver Exit\n", __func__);
+ flush_scheduled_work(); /* Make sure all scheduled work is stopped */
+}
+
+
+module_init(rmi_sensor_init);
+module_exit(rmi_sensor_exit);
+
+MODULE_AUTHOR("Synaptics, Inc.");
+MODULE_DESCRIPTION("RMI4 Sensor Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/synaptics/rmi_sensor.h b/drivers/input/touchscreen/synaptics/rmi_sensor.h
new file mode 100644
index 0000000..63d2555
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_sensor.h
@@ -0,0 +1,143 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) - RMI Sensor Module Header.
+ * Copyright (C) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ *
+ * This file is licensed under the GPL2 license.
+ *
+ *############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *############################################################################
+ */
+
+#include <linux/device.h>
+
+#ifndef _RMI_SENSOR_H
+#define _RMI_SENSOR_H
+
+#include <linux/input/rmi_platformdata.h>
+
+struct rmi_sensor_driver {
+ struct module *module;
+ struct device_driver drv;
+ struct rmi_sensor_device *sensor_device;
+
+ /* Attention Function
+ * This function is called by the low level isr in the physical
+ * driver. It merely schedules work to be done.
+ */
+ void (*attention)(struct rmi_phys_driver *physdrvr, int instance);
+ /* Probe Function
+ * This function is called to give the sensor driver layer an
+ * opportunity to claim an RMI device. The sensor layer cannot
+ * read RMI registers at this point since the rmi physical driver
+ * has not been bound to it yet. Defer that to the config
+ * function call which occurs immediately after a successful probe.
+ */
+ int (*probe)(struct rmi_sensor_driver *sensor);
+ /* Config Function
+ * This function is called after a successful probe. It gives the
+ * sensor driver an opportunity to query and/or configure an RMI
+ * device before data starts flowing.
+ */
+ void (*config)(struct rmi_sensor_driver *sensor);
+
+ /* Functions can call this in order to dispatch IRQs. */
+ void (*dispatchIRQs)(struct rmi_sensor_driver *sensor,
+ unsigned int irqStatus);
+
+ /* Register Functions
+ * This function is called in the rmi bus
+ * driver to have the sensor driver scan for any supported
+ * functions on the sensor and add devices for each one.
+ */
+ void (*rmi_sensor_register_functions)(struct rmi_sensor_driver
+ *sensor);
+
+ unsigned int interruptRegisterCount;
+
+ bool polling_required;
+
+ /* pointer to the corresponding phys driver info for this sensor */
+ /* The phys driver has the pointers to read, write, etc. */
+ struct rmi_phys_driver *rpd;
+
+ struct hrtimer timer;
+ struct work_struct work;
+ bool workIsReady;
+
+ /* This list is for keeping around the list of sensors.
+ * Every time that a physical device is detected by the
+ * physical layer - be it i2c, spi, or some other - then
+ * we need to bind the physical layer to the device. When
+ * the Page Descriptor Table is scanned and when Function $01
+ * is found then a new sensor device is created. The corresponding
+ * rmi_phys_driver struct pointer needs to be bound to the new
+ * sensor since Function $01 will be used to control and get
+ * interrupt information about the particular data source that is
+ * doing the interrupt. The rmi_phys_driver contains the pointers
+ * to the particular read, write, read_multiple, write_multiple
+ * functions for this device. This rmi_phys_driver struct will
+ * have to be up-bound to any drivers upstream that need it.
+ */
+
+ /* Standard kernel linked list implementation.
+ * Documentation on how to use it can be found at
+ * http://isis.poly.edu/kulesh/stuff/src/klist/.
+ */
+ struct list_head sensor_drivers; /* link sensor drivers into list */
+
+ struct list_head functions; /* List of rmi_function_infos */
+ /* Per function initialization data. */
+ struct rmi_functiondata_list *perfunctiondata;
+};
+
+/* macro to get the pointer to the device_driver struct from the sensor */
+#define to_rmi_sensor_driver(drv) container_of(drv, \
+ struct rmi_sensor_driver, drv);
+
+struct rmi_sensor_device {
+ struct rmi_sensor_driver *driver;
+ struct device dev;
+
+ /* Standard kernel linked list implementation.
+ * Documentation on how to use it can be found at
+ * http://isis.poly.edu/kulesh/stuff/src/klist/.
+ */
+ struct list_head sensors; /* link sensors into list */
+};
+
+int rmi_sensor_register_device(struct rmi_sensor_device *dev, int index);
+int rmi_sensor_register_driver(struct rmi_sensor_driver *driver);
+int rmi_sensor_register_functions(struct rmi_sensor_driver *sensor);
+bool rmi_polling_required(struct rmi_sensor_driver *sensor);
+
+static inline void *rmi_sensor_get_functiondata(struct rmi_sensor_driver
+ *driver, unsigned char function_index)
+{
+ int i;
+ if (driver->perfunctiondata) {
+ for (i = 0; i < driver->perfunctiondata->count; i++) {
+ if (driver->perfunctiondata->functiondata[i].
+ function_index == function_index)
+ return driver->perfunctiondata->
+ functiondata[i].data;
+ }
+ }
+ return NULL;
+}
+
+#endif
diff --git a/drivers/input/touchscreen/synaptics/rmi_spi.c b/drivers/input/touchscreen/synaptics/rmi_spi.c
new file mode 100644
index 0000000..d6b247d
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_spi.c
@@ -0,0 +1,616 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) SPI Physical Layer Driver.
+ * Copyright (C) 2008-2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *############################################################################
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/spi/spi.h>
+#include <linux/platform_device.h>
+#include <linux/semaphore.h>
+#include <linux/spi/spi.h>
+#include <linux/input/rmi_platformdata.h>
+#include "rmi_spi.h"
+#include "rmi_drvr.h"
+
+#define COMM_DEBUG 1 /* Set to 1 to dump transfers. */
+
+/* 65 microseconds inter-byte delay between bytes for RMI chip*/
+#define RMI_DEFAULT_BYTE_DELAY_US 0 /* 65 */
+#define SPI_BUFFER_SIZE 32
+
+static u8 *buf;
+
+/* This is the data kept on a per instance (client) basis. This data is
+ * always accessible by using the container_of() macro of the various elements
+ * inside.
+ */
+struct spi_device_instance_data {
+ int instance_no;
+ int irq;
+ unsigned int byte_delay_us;
+ struct rmi_phys_driver rpd;
+ struct spi_device *spidev;
+ struct rmi_spi_platformdata *platformdata;
+};
+
+static int spi_xfer(struct spi_device_instance_data *instance_data,
+ const u8 *txbuf, unsigned n_tx, u8 *rxbuf, unsigned n_rx)
+{
+ struct spi_device *spi = instance_data->spidev;
+#if COMM_DEBUG
+ int i;
+#endif
+ int status;
+ struct spi_message message;
+ struct spi_transfer *xfer_list;
+ u8 *local_buf;
+ int nXfers = 0;
+ int xfer_index = 0;
+
+ if ((n_tx + n_rx) > SPI_BUFFER_SIZE)
+ return -EINVAL;
+
+ if (n_tx)
+ nXfers += 1;
+ if (n_rx) {
+ if (instance_data->byte_delay_us)
+ nXfers += n_rx;
+ else
+ nXfers += 1;
+ }
+
+ xfer_list = kcalloc(nXfers, sizeof(struct spi_transfer), GFP_KERNEL);
+ if (!xfer_list)
+ return -ENOMEM;
+
+ /* ... unless someone else is using the pre-allocated buffer */
+ local_buf = kzalloc(SPI_BUFFER_SIZE, GFP_KERNEL);
+ if (!local_buf) {
+ kfree(xfer_list);
+ return -ENOMEM;
+ }
+
+ spi_message_init(&message);
+
+ if (n_tx) {
+ memset(&xfer_list[0], 0, sizeof(struct spi_transfer));
+ xfer_list[0].len = n_tx;
+ xfer_list[0].delay_usecs = instance_data->byte_delay_us;
+ spi_message_add_tail(&xfer_list[0], &message);
+ memcpy(local_buf, txbuf, n_tx);
+ xfer_list[0].tx_buf = local_buf;
+ xfer_index++;
+ }
+ if (n_rx) {
+ if (instance_data->byte_delay_us) {
+ int buffer_offset = n_tx;
+ for (; xfer_index < nXfers; xfer_index++) {
+ memset(&xfer_list[xfer_index], 0,
+ sizeof(struct spi_transfer));
+ xfer_list[xfer_index].len = 1;
+ xfer_list[xfer_index].delay_usecs =
+ instance_data->byte_delay_us;
+ xfer_list[xfer_index].rx_buf =
+ local_buf + buffer_offset;
+ buffer_offset++;
+ spi_message_add_tail(&xfer_list[xfer_index],
+ &message);
+#ifdef CONFIG_ARCH_OMAP
+ printk(KERN_INFO "%s: Did you compensate for
+ ARCH_OMAP?", __func__);
+/* x[1].len = n_rx-1; */ /* since OMAP has one dummy byte. */
+#else
+/* x[1].len = n_rx; */
+#endif
+ }
+ } else {
+ memset(&xfer_list[xfer_index], 0, sizeof(struct
+ spi_transfer));
+#ifdef CONFIG_ARCH_OMAP
+ /* since OMAP has one dummy byte. */
+ xfer_list[xfer_index].len = n_rx-1;
+#else
+ xfer_list[xfer_index].len = n_rx;
+#endif
+ xfer_list[xfer_index].rx_buf = local_buf + n_tx;
+ spi_message_add_tail(&xfer_list[xfer_index],
+ &message);
+ xfer_index++;
+ }
+ }
+ printk(KERN_INFO "%s: Ready to go, xfer_index = %d, nXfers = %d.",
+ __func__, xfer_index, nXfers);
+#if COMM_DEBUG
+ printk(KERN_INFO "%s: SPI transmits %d bytes...", __func__, n_tx);
+ for (i = 0; i < n_tx; i++)
+ printk(KERN_INFO " 0x%02X", local_buf[i]);
+#endif
+
+ /* do the i/o */
+ status = spi_sync(spi, &message);
+ if (status == 0) {
+ memcpy(rxbuf, local_buf + n_tx, n_rx);
+ status = message.status;
+#if COMM_DEBUG
+ if (n_rx) {
+ printk(KERN_INFO "%s: SPI received %d bytes...",
+ __func__, n_rx);
+ for (i = 0; i < n_rx; i++)
+ printk(KERN_INFO " 0x%02X", rxbuf[i]);
+ }
+#endif
+ } else {
+ printk(KERN_ERR "%s: spi_sync failed with error code %d.",
+ __func__, status);
+ }
+
+ kfree(local_buf);
+ kfree(xfer_list);
+
+ return status;
+}
+
+/**
+ * Read a single register through spi.
+ * \param[in] pd
+ * \param[in] address The address at which to start the data read.
+ * \param[out] valp Pointer to the buffer where the data will be stored.
+ * \return zero upon success (with the byte read in valp),non-zero upon error.
+ */
+static int
+rmi_spi_read(struct rmi_phys_driver *pd, unsigned short address, char *valp)
+{
+ struct spi_device_instance_data *id =
+ container_of(pd, struct spi_device_instance_data, rpd);
+
+ char rxbuf[2];
+ int retval;
+ unsigned short addr = address;
+
+ addr = ((addr & 0xff00) >> 8);
+ address = ((address & 0x00ff) << 8);
+ addr |= address;
+ addr |= 0x80; /* High bit set indicates read. */
+
+ retval = spi_xfer(id, (u8 *)&addr, 2, rxbuf, 1);
+
+ *valp = rxbuf[0];
+
+ return retval;
+}
+
+/**
+ * Same as rmi_spi_read, except that multiple bytes are allowed to be read.
+ * \param[in] pd
+ * \param[in] address The address at which to start the data read.
+ * \param[out] valp Pointer to the buffer where the data will be stored. This
+ * buffer must be at least size bytes long.
+ * \param[in] size The number of bytes to be read.
+ * \return zero upon success(with the byte read in valp), non-zero upon error.
+ */
+static int
+rmi_spi_read_multiple(struct rmi_phys_driver *pd, unsigned short address,
+ char *valp, int size)
+{
+ struct spi_device_instance_data *id =
+ container_of(pd, struct spi_device_instance_data, rpd);
+ int retval;
+
+ unsigned short addr = address;
+
+ addr = ((addr & 0xff00) >> 8);
+ address = ((address & 0x00ff) << 8);
+ addr |= address;
+ addr |= 0x80; /* High bit set indicates read. */
+
+ retval = spi_xfer(id, (u8 *)&addr, 2, valp, size);
+
+ return retval;
+}
+
+/**
+ * Write a single register through spi.
+ * You can write multiple registers at once, but I made the functions for that
+ * seperate for performance reasons. Writing multiple requires allocation and
+ * freeing.
+ * \param[in] pd
+ * \param[in] address The address at which to start the write.
+ * \param[in] data The data to be written.
+ * \return one upon success, something else upon error.
+ */
+static int
+rmi_spi_write(struct rmi_phys_driver *pd, unsigned short address, char data)
+{
+ struct spi_device_instance_data *id =
+ container_of(pd, struct spi_device_instance_data, rpd);
+ unsigned char txbuf[4];
+ int retval;
+
+ txbuf[2] = data;
+ txbuf[1] = address;
+ txbuf[0] = address>>8;
+
+ retval = spi_xfer(id, txbuf, 3, NULL, 0);
+ return retval ? 0 : 1;
+}
+
+/**
+ * Write multiple registers.
+ * \param[in] pd
+ * \param[in] address The address at which to start the write.
+ * \param[in] valp A pointer to a buffer containing the data to be written.
+ * \param[in] size The number of bytes to write.
+ * \return one upon success, something else upon error.
+ */
+static int
+rmi_spi_write_multiple(struct rmi_phys_driver *pd, unsigned short address,
+ char *valp, int size)
+{
+ struct spi_device_instance_data *id =
+ container_of(pd, struct spi_device_instance_data, rpd);
+ unsigned char txbuf[32];
+ int retval;
+ int i;
+
+ txbuf[1] = address;
+ txbuf[0] = address>>8;
+
+ for (i = 0; i < size; i++)
+ txbuf[i + 2] = valp[i];
+
+ retval = spi_xfer(id, txbuf, size+2, NULL, 0);
+
+ return retval ? 0 : 1;
+}
+
+/**
+ * This is the Interrupt Service Routine.
+ * It just notifies the physical device
+ * that attention is required.
+ */
+static irqreturn_t spi_attn_isr(int irq, void *info)
+{
+ struct spi_device_instance_data *instance_data = info;
+ disable_irq_nosync(instance_data->irq);
+ if (instance_data->rpd.attention)
+ instance_data->rpd.attention(&instance_data->rpd,
+ instance_data->instance_no);
+ return IRQ_HANDLED;
+}
+
+/* TODO: Move this to rmi_bus, and call a function to get the next sensorID
+ */
+static int sensor_count;
+
+static int __devinit rmi_spi_probe(struct spi_device *spi)
+{
+ struct spi_device_instance_data *instance_data;
+ int retval;
+ struct rmi_spi_platformdata *platformdata;
+ struct rmi_sensordata *sensordata;
+ int irqtype = 0;
+
+ printk(KERN_INFO "Probing RMI4 SPI device\n");
+
+ /* This should have already been set up in the board file,
+ shouldn't it? */
+ spi->bits_per_word = 8;
+
+ spi->mode = SPI_MODE_3;
+
+ retval = spi_setup(spi);
+ if (retval < 0) {
+ printk(KERN_ERR "%s: spi_setup failed with %d.", __func__,
+ retval);
+ return retval;
+ }
+
+ buf = kzalloc(SPI_BUFFER_SIZE, GFP_KERNEL);
+ if (!buf) {
+ printk(KERN_ERR "%s: Failed to allocate memory for spi
+ buffer.", __func__);
+ return -ENOMEM;
+ }
+
+ instance_data = kzalloc(sizeof(*instance_data), GFP_KERNEL);
+ if (!instance_data) {
+ printk(KERN_ERR "%s: Failer to allocate memory for instance
+ data.", __func__);
+ return -ENOMEM;
+ }
+
+ instance_data->byte_delay_us = RMI_DEFAULT_BYTE_DELAY_US;
+ instance_data->spidev = spi;
+ instance_data->rpd.name = RMI4_SPI_DRIVER_NAME;
+ instance_data->rpd.write = rmi_spi_write;
+ instance_data->rpd.read = rmi_spi_read;
+ instance_data->rpd.write_multiple = rmi_spi_write_multiple;
+ instance_data->rpd.read_multiple = rmi_spi_read_multiple;
+ instance_data->rpd.module = THIS_MODULE;
+ /* default to polling if irq not used */
+ instance_data->rpd.polling_required = true;
+
+ platformdata = spi->dev.platform_data;
+ if (platformdata == NULL) {
+ printk(KERN_ERR "%s: CONFIGURATION ERROR - platform data
+ is NULL.", __func__);
+ return -EINVAL;
+ }
+
+ instance_data->platformdata = platformdata;
+ sensordata = platformdata->sensordata;
+
+ /* Call the platform setup routine, to do any setup that is required
+ * before
+ * interacting with the device.
+ */
+ if (sensordata && sensordata->rmi_sensor_setup) {
+ retval = sensordata->rmi_sensor_setup();
+ if (retval) {
+ printk(KERN_ERR "%s: sensor setup failed with
+ code %d.", __func__, retval);
+ kfree(instance_data);
+ return retval;
+ }
+ }
+
+ /* TODO: I think this if is no longer required. */
+ if (platformdata->chip == RMI_SUPPORT) {
+ instance_data->instance_no = sensor_count;
+ sensor_count++;
+
+ /* set the device name using the instance_no
+ * appended to DEVICE_NAME to make a unique name
+ */
+ dev_set_name(&spi->dev, "%s%d", RMI4_SPI_DEVICE_NAME,
+ instance_data->instance_no);
+ /*
+ * Determine if we need to poll (inefficient) or
+ * use interrupts.
+ */
+ if (platformdata->irq) {
+ switch (platformdata->irq_type) {
+ case IORESOURCE_IRQ_HIGHEDGE:
+ irqtype = IRQF_TRIGGER_RISING;
+ break;
+ case IORESOURCE_IRQ_LOWEDGE:
+ irqtype = IRQF_TRIGGER_FALLING;
+ break;
+ case IORESOURCE_IRQ_HIGHLEVEL:
+ irqtype = IRQF_TRIGGER_HIGH;
+ break;
+ case IORESOURCE_IRQ_LOWLEVEL:
+ irqtype = IRQF_TRIGGER_LOW;
+ break;
+ default:
+ dev_warn(&spi->dev, "%s: Invalid IRQ flags
+ in platform data.", __func__);
+ retval = -ENXIO;
+ goto error_exit;
+ }
+/*
+ retval = request_irq(instance_data->irq, spi_attn_isr,
+ irqtype, "rmi_spi", instance_data);
+ if (retval) {
+ dev_info(&spi->dev, "%s: Unable to get attn
+ irq %d. Reverting to polling. ", __func__,
+ instance_data->irq);
+ instance_data->rpd.polling_required = true;
+ } else {
+ dev_dbg(&spi->dev, "%s: got irq", __func__);
+ instance_data->rpd.polling_required = false;
+ instance_data->rpd.irq = instance_data->irq;
+ }
+*/
+ instance_data->rpd.polling_required = false;
+ } else {
+ instance_data->rpd.polling_required = true;
+ dev_info(&spi->dev, "%s: No IRQ info given.
+ Polling required.", __func__);
+ }
+ }
+
+ /* Store instance data for later access. */
+ if (instance_data)
+ spi_set_drvdata(spi, instance_data);
+
+ /* Register the sensor driver -
+ * which will trigger a scan of the PDT.
+ */
+ retval = rmi_register_sensor(&instance_data->rpd,
+ platformdata->sensordata);
+ if (retval) {
+ printk(KERN_ERR "%s: sensor registration failed with code
+ %d.", __func__, retval);
+ goto error_exit;
+ }
+
+ if (instance_data->rpd.polling_required == false) {
+ instance_data->irq = platformdata->irq;
+ retval = request_irq(platformdata->irq, spi_attn_isr,
+ irqtype, dev_name(&spi->dev), instance_data);
+ if (retval) {
+ dev_err(&spi->dev, "%s: failed to obtain IRQ %d.
+ Result: %d.", __func__,
+ platformdata->irq, retval);
+ dev_info(&spi->dev, "%s: Reverting to polling.\n",
+ __func__);
+ instance_data->rpd.polling_required = true;
+ instance_data->irq = 0;
+ /* TODO: Need to revert back to polling
+ * - create and start timer.
+ */
+ } else {
+ dev_dbg(&spi->dev, "%s: got irq.\n", __func__);
+ instance_data->rpd.irq = instance_data->irq;
+ }
+ }
+
+ printk(KERN_INFO "%s: Successfully Registered %s.",
+ __func__, instance_data->rpd.name);
+
+ return 0;
+
+error_exit:
+ if (sensordata && sensordata->rmi_sensor_teardown)
+ sensordata->rmi_sensor_teardown();
+ if (instance_data->irq)
+ free_irq(instance_data->irq, instance_data);
+ kfree(instance_data);
+ return retval;
+}
+
+static int rmi_spi_suspend(struct spi_device *spi, pm_message_t message)
+{
+ printk(KERN_INFO "%s: Suspending...", __func__);
+ return 0;
+}
+
+static int rmi_spi_resume(struct spi_device *spi)
+{
+ printk(KERN_INFO "%s: Resuming...", __func__);
+ return 0;
+}
+
+static int __devexit rmi_spi_remove(struct spi_device *spi)
+{
+ struct spi_device_instance_data *id = spi_get_drvdata(spi);
+
+ printk(KERN_INFO "%s: RMI SPI device removed.", __func__);
+
+ rmi_spi_suspend(spi, PMSG_SUSPEND);
+
+ rmi_unregister_sensors(&id->rpd);
+
+ if (id) {
+ if (id->irq)
+ free_irq(id->irq, id);
+ kfree(id);
+ }
+
+ return 0;
+}
+
+static struct spi_driver rmi_spi_driver = {
+ .driver = {
+ .name = RMI4_SPI_DRIVER_NAME,
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = rmi_spi_probe,
+ .remove = __devexit_p(rmi_spi_remove),
+ .suspend = rmi_spi_suspend,
+ .resume = rmi_spi_resume,
+};
+
+/**
+ * The Platform Driver probe function. We just tell the spi subsystem about
+ * ourselves in this call.
+ */
+static int
+rmi_spi_plat_probe(struct platform_device *dev)
+{
+ struct rmi_spi_platformdata *platform_data = dev->dev.platform_data;
+
+ printk(KERN_INFO "%s: Platform driver probe.", __func__);
+
+ if (!platform_data) {
+ printk(KERN_ERR "A platform device must contain
+ rmi_spi_platformdata\n");
+ return -ENXIO;
+ }
+
+ return spi_register_driver(&rmi_spi_driver);
+}
+
+/**
+ * Tell the spi subsystem that we're done.
+ * \param[in] dev
+ * \return Always returns 0.
+ */
+static int
+rmi_spi_plat_remove(struct platform_device *dev)
+{
+ printk(KERN_INFO "%s: Platform driver removed.", __func__);
+ spi_unregister_driver(&rmi_spi_driver);
+ return 0;
+}
+
+/**
+ * Structure used to tell the Platform Driver subsystem about us.
+ */
+static struct platform_driver rmi_spi_platform_driver = {
+ .driver = {
+ .name = RMI4_SPI_DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = rmi_spi_plat_probe,
+ .remove = __devexit_p(rmi_spi_plat_remove),
+};
+
+static int __init rmi_spi_init(void)
+{
+ int retval;
+
+ printk(KERN_INFO "%s: RMI SPI physical layer initialization.",
+ __func__);
+ retval = spi_register_driver(&rmi_spi_driver);
+ if (retval < 0) {
+ printk(KERN_ERR "%s: Failed to register spi driver, code
+ = %d.", __func__, retval);
+ return retval;
+ }
+/*
+#else
+ retval = platform_driver_register(&rmi_spi_platform_driver);
+ if (retval < 0) {
+ printk(KERN_ERR "%s: Failed to register platform driver,
+ code = %d.", __func__, retval);
+ return retval;
+ }
+#endif
+*/
+ printk(KERN_INFO "%s: result = %d", __func__, retval);
+ return retval;
+}
+module_init(rmi_spi_init);
+
+static void __exit rmi_spi_exit(void)
+{
+ printk(KERN_INFO "%s: RMI SPI physical layer exits.", __func__);
+ kfree(buf);
+ buf = NULL;
+ platform_driver_unregister(&rmi_spi_platform_driver);
+}
+module_exit(rmi_spi_exit);
+
+/** Standard driver module information - the author of the module.
+ */
+MODULE_AUTHOR("Synaptics, Inc.");
+/** Standard driver module information - a summary description of this module.
+ */
+MODULE_DESCRIPTION("RMI4 Driver SPI Physical Layer");
+/** Standard driver module information - the license under which this module
+ * is included in the kernel.
+ */
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/synaptics/rmi_spi.h b/drivers/input/touchscreen/synaptics/rmi_spi.h
new file mode 100644
index 0000000..daeebed
--- /dev/null
+++ b/drivers/input/touchscreen/synaptics/rmi_spi.h
@@ -0,0 +1,57 @@
+/**
+ *
+ * Register Mapped Interface SPI Physical Layer Driver Header File.
+ * Copyright (C) 2008-2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#if !defined(_RMI_SPI_H)
+#define _RMI_SPI_H
+
+#include <linux/input/rmi_platformdata.h>
+
+#define RMI_CHIP_VER_3 0
+#define RMI_CHIP_VER_4 1
+
+#define RMI_SUPPORT (RMI_CHIP_VER_3|RMI_CHIP_VER_4)
+
+#define RMI4_SPI_DRIVER_NAME "rmi4_ts"
+#define RMI4_SPI_DEVICE_NAME "rmi4_ts"
+
+/** Platform-specific configuration data.
+ * This structure is used by the platform-specific driver to designate
+ * specific information about the hardware. A platform client may supply
+ * an array of these to the rmi_phys_spi driver.
+ */
+struct rmi_spi_platformdata {
+ int chip;
+
+ /* The number of the irq. Set to zero if polling is required. */
+ int irq;
+
+ /* The type of the irq (e.g., IRQF_TRIGGER_FALLING). Only valid if
+ * irq != 0 */
+ int irq_type;
+
+ /* Use this to specify platformdata that is not I2C specific. */
+ struct rmi_sensordata *sensordata;
+};
+
+#endif
diff --git a/include/linux/input/rmi_i2c.h b/include/linux/input/rmi_i2c.h
new file mode 100644
index 0000000..65ebbfb
--- /dev/null
+++ b/include/linux/input/rmi_i2c.h
@@ -0,0 +1,58 @@
+/**
+ *
+ * Synaptics RMI over I2C Physical Layer Driver Header File.
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#ifndef _RMI_I2C_H
+#define _RMI_I2C_H
+
+#include <linux/input/rmi_platformdata.h>
+
+/* Sensor-specific configuration data, to be included as the platform data
+ * for the relevant i2c_board_info entry.
+ *
+ * This describes a single RMI4 sensor on an I2C bus, including:
+ * its I2C address, IRQ (if any), the type of IRQ (if applicable), and an
+ * optional list of any non-default settings (on a per function basis)
+ * to be applied at start up.
+ */
+struct rmi_i2c_platformdata {
+ /* The seven-bit i2c address of the sensor. */
+ int i2c_address;
+ /* The number of the irq. Set to zero if polling is required. */
+ int irq;
+ /* The type of the irq (e.g., IRQF_TRIGGER_FALLING).
+ * Only valid if irq != 0 */
+ int irq_type;
+
+ /* If >0, the driver will delay this many milliseconds before attempting
+ * I2C communications. This is necessary because some horribly broken
+ * development systems don't bring their I2C up very fast after system
+ * power on or reboot. In most cases, you can safely ignore this.
+ */
+ int delay_ms;
+
+ /* Use this to specify platformdata that is not I2C specific. */
+ struct rmi_sensordata *sensordata;
+};
+
+#endif
diff --git a/include/linux/input/rmi_platformdata.h b/include/linux/input/rmi_platformdata.h
new file mode 100644
index 0000000..8c44d4c
--- /dev/null
+++ b/include/linux/input/rmi_platformdata.h
@@ -0,0 +1,125 @@
+/**
+ *
+ * Synaptics RMI platform data definitions for use in board files.
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *############################################################################
+ */
+
+#if !defined(_RMI_PLATFORMDATA_H)
+#define _RMI_PLATFORMDATA_H
+
+#define RMI_F01_INDEX 0x01
+#define RMI_F11_INDEX 0x11
+#define RMI_F19_INDEX 0x19
+#define RMI_F34_INDEX 0x34
+
+
+/* A couple of structs that are useful for frequently occuring constructs,such
+ * as coordinate origin offsets or coordinate clipping values.
+ */
+struct rmi_XY_pair {
+ int x;
+ int y;
+};
+
+struct rmi_range {
+ int min;
+ int max;
+};
+
+/* This contains sensor specific data that is not specialized to I2C or SPI.
+ */
+struct rmi_sensordata {
+ /* This will be called from rmi_register_sensor(). You can use it
+ * to set up gpios, IRQs, and other platform specific infrastructure.
+ */
+ int (*rmi_sensor_setup)(void);
+
+ /* This will be called when the sensor is unloaded. Use this to
+ * release gpios, IRQs, and other platform specific infrastructure.
+ */
+ void (*rmi_sensor_teardown)(void);
+
+ /* Use this to specify non-default settings on a per function basis.
+ */
+ struct rmi_functiondata_list *perfunctiondata;
+};
+
+/* This contains the per-function customization for a given function.We store
+ * the data this way in order to avoid allocating a large sparse array
+ * typically
+ * only a few functions are present on a sensor, and even fewer will be have
+ * custom settings. There is a very small penalty paid for doing a linear
+ * search through the list to find a given function's data, but since the list
+ * is typically very short and is searched only at system boot time, this is
+ * considered acceptable.
+ *
+ * When adding new fields to a functiondata struct, please follow these rules:
+ * - Where possible, use 0 to indicate that the value should be defaulted.
+ * This works pretty well for bools, ints, and chars.
+ * - Where this is not practical (for example, in coordinate offsets or
+ * range clipping), use a pointer. Set that pointer to null to indicate
+ * that the value should be defaulted.
+ */
+struct rmi_functiondata {
+ unsigned char function_index;
+ void *data;
+};
+
+/* This can be included in the platformdata for SPI or I2C RMI4 devices to
+ * customize the settings of the functions on a given sensor.
+ */
+struct rmi_functiondata_list {
+ unsigned char count; /* Number of elements in the array */
+ struct rmi_functiondata *functiondata;
+};
+
+struct rmi_f01_functiondata {
+ /* What this does is product specific. For most, but not all, RMI4
+ * devices, you can set this to true in order to request the device
+ * report data at half the usual rate. This can be useful on slow
+ * CPUs that don't have the resources to process data at the usual
+ * rate. However, the meaning of this field is product specific, and
+ * you should consult the product spec for your sensor to find out
+ * what this will do.
+ */
+ bool nonstandard_report_rate;
+};
+
+struct rmi_f11_functiondata {
+ bool swap_axes;
+ bool flipX;
+ bool flipY;
+ int button_height;
+ struct rmi_XY_pair *offset;
+ struct rmi_range *clipX;
+ struct rmi_range *clipY;
+};
+
+struct rmi_button_map {
+ unsigned char nbuttons;
+ unsigned char *map;
+};
+
+struct rmi_f19_functiondata {
+ struct rmi_button_map *button_map;
+};
+
+#endif