| /* |
| card-azt2320.c - driver for Aztech Systems AZT2320 based soundcards. |
| Copyright (C) 1999-2000 by Massimo Piccioni <dafastidio@libero.it> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| /* |
| This driver should provide support for most Aztech AZT2320 based cards. |
| Several AZT2316 chips are also supported/tested, but autoprobe doesn't |
| work: all module option have to be set. |
| |
| No docs available for us at Aztech headquarters !!! Unbelievable ... |
| No other help obtained. |
| |
| Thanks to Rainer Wiesner <rainer.wiesner@01019freenet.de> for the WSS |
| activation method (full-duplex audio!). |
| */ |
| |
| #include <sound/driver.h> |
| #include <asm/io.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/time.h> |
| #include <linux/wait.h> |
| #include <linux/pnp.h> |
| #include <linux/moduleparam.h> |
| #include <sound/core.h> |
| #include <sound/initval.h> |
| #include <sound/cs4231.h> |
| #include <sound/mpu401.h> |
| #include <sound/opl3.h> |
| |
| #define PFX "azt2320: " |
| |
| MODULE_AUTHOR("Massimo Piccioni <dafastidio@libero.it>"); |
| MODULE_DESCRIPTION("Aztech Systems AZT2320"); |
| MODULE_LICENSE("GPL"); |
| MODULE_SUPPORTED_DEVICE("{{Aztech Systems,PRO16V}," |
| "{Aztech Systems,AZT2320}," |
| "{Aztech Systems,AZT3300}," |
| "{Aztech Systems,AZT2320}," |
| "{Aztech Systems,AZT3000}}"); |
| |
| static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ |
| static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ |
| static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_ISAPNP; /* Enable this card */ |
| static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */ |
| static long wss_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */ |
| static long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */ |
| static long fm_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */ |
| static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* Pnp setup */ |
| static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* Pnp setup */ |
| static int dma1[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* PnP setup */ |
| static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* PnP setup */ |
| |
| module_param_array(index, int, NULL, 0444); |
| MODULE_PARM_DESC(index, "Index value for azt2320 based soundcard."); |
| module_param_array(id, charp, NULL, 0444); |
| MODULE_PARM_DESC(id, "ID string for azt2320 based soundcard."); |
| module_param_array(enable, bool, NULL, 0444); |
| MODULE_PARM_DESC(enable, "Enable azt2320 based soundcard."); |
| module_param_array(port, long, NULL, 0444); |
| MODULE_PARM_DESC(port, "Port # for azt2320 driver."); |
| module_param_array(wss_port, long, NULL, 0444); |
| MODULE_PARM_DESC(wss_port, "WSS Port # for azt2320 driver."); |
| module_param_array(mpu_port, long, NULL, 0444); |
| MODULE_PARM_DESC(mpu_port, "MPU-401 port # for azt2320 driver."); |
| module_param_array(fm_port, long, NULL, 0444); |
| MODULE_PARM_DESC(fm_port, "FM port # for azt2320 driver."); |
| module_param_array(irq, int, NULL, 0444); |
| MODULE_PARM_DESC(irq, "IRQ # for azt2320 driver."); |
| module_param_array(mpu_irq, int, NULL, 0444); |
| MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for azt2320 driver."); |
| module_param_array(dma1, int, NULL, 0444); |
| MODULE_PARM_DESC(dma1, "1st DMA # for azt2320 driver."); |
| module_param_array(dma2, int, NULL, 0444); |
| MODULE_PARM_DESC(dma2, "2nd DMA # for azt2320 driver."); |
| |
| struct snd_card_azt2320 { |
| int dev_no; |
| struct pnp_dev *dev; |
| struct pnp_dev *devmpu; |
| struct snd_cs4231 *chip; |
| }; |
| |
| static struct pnp_card_device_id snd_azt2320_pnpids[] = { |
| /* PRO16V */ |
| { .id = "AZT1008", .devs = { { "AZT1008" }, { "AZT2001" }, } }, |
| /* Aztech Sound Galaxy 16 */ |
| { .id = "AZT2320", .devs = { { "AZT0001" }, { "AZT0002" }, } }, |
| /* Packard Bell Sound III 336 AM/SP */ |
| { .id = "AZT3000", .devs = { { "AZT1003" }, { "AZT2001" }, } }, |
| /* AT3300 */ |
| { .id = "AZT3002", .devs = { { "AZT1004" }, { "AZT2001" }, } }, |
| /* --- */ |
| { .id = "AZT3005", .devs = { { "AZT1003" }, { "AZT2001" }, } }, |
| /* --- */ |
| { .id = "AZT3011", .devs = { { "AZT1003" }, { "AZT2001" }, } }, |
| { .id = "" } /* end */ |
| }; |
| |
| MODULE_DEVICE_TABLE(pnp_card, snd_azt2320_pnpids); |
| |
| #define DRIVER_NAME "snd-card-azt2320" |
| |
| static int __devinit snd_card_azt2320_pnp(int dev, struct snd_card_azt2320 *acard, |
| struct pnp_card_link *card, |
| const struct pnp_card_device_id *id) |
| { |
| struct pnp_dev *pdev; |
| struct pnp_resource_table * cfg = kmalloc(sizeof(struct pnp_resource_table), GFP_KERNEL); |
| int err; |
| |
| if (!cfg) |
| return -ENOMEM; |
| |
| acard->dev = pnp_request_card_device(card, id->devs[0].id, NULL); |
| if (acard->dev == NULL) { |
| kfree(cfg); |
| return -ENODEV; |
| } |
| |
| acard->devmpu = pnp_request_card_device(card, id->devs[1].id, NULL); |
| |
| pdev = acard->dev; |
| pnp_init_resource_table(cfg); |
| |
| /* override resources */ |
| if (port[dev] != SNDRV_AUTO_PORT) |
| pnp_resource_change(&cfg->port_resource[0], port[dev], 16); |
| if (fm_port[dev] != SNDRV_AUTO_PORT) |
| pnp_resource_change(&cfg->port_resource[1], fm_port[dev], 4); |
| if (wss_port[dev] != SNDRV_AUTO_PORT) |
| pnp_resource_change(&cfg->port_resource[2], wss_port[dev], 4); |
| if (dma1[dev] != SNDRV_AUTO_DMA) |
| pnp_resource_change(&cfg->dma_resource[0], dma1[dev], 1); |
| if (dma2[dev] != SNDRV_AUTO_DMA) |
| pnp_resource_change(&cfg->dma_resource[1], dma2[dev], 1); |
| if (irq[dev] != SNDRV_AUTO_IRQ) |
| pnp_resource_change(&cfg->irq_resource[0], irq[dev], 1); |
| if ((pnp_manual_config_dev(pdev, cfg, 0)) < 0) |
| snd_printk(KERN_ERR PFX "AUDIO the requested resources are invalid, using auto config\n"); |
| |
| err = pnp_activate_dev(pdev); |
| if (err < 0) { |
| snd_printk(KERN_ERR PFX "AUDIO pnp configure failure\n"); |
| kfree(cfg); |
| return err; |
| } |
| port[dev] = pnp_port_start(pdev, 0); |
| fm_port[dev] = pnp_port_start(pdev, 1); |
| wss_port[dev] = pnp_port_start(pdev, 2); |
| dma1[dev] = pnp_dma(pdev, 0); |
| dma2[dev] = pnp_dma(pdev, 1); |
| irq[dev] = pnp_irq(pdev, 0); |
| |
| pdev = acard->devmpu; |
| if (pdev != NULL) { |
| pnp_init_resource_table(cfg); |
| if (mpu_port[dev] != SNDRV_AUTO_PORT) |
| pnp_resource_change(&cfg->port_resource[0], mpu_port[dev], 2); |
| if (mpu_irq[dev] != SNDRV_AUTO_IRQ) |
| pnp_resource_change(&cfg->irq_resource[0], mpu_irq[dev], 1); |
| if ((pnp_manual_config_dev(pdev, cfg, 0)) < 0) |
| snd_printk(KERN_ERR PFX "MPU401 the requested resources are invalid, using auto config\n"); |
| err = pnp_activate_dev(pdev); |
| if (err < 0) |
| goto __mpu_error; |
| mpu_port[dev] = pnp_port_start(pdev, 0); |
| mpu_irq[dev] = pnp_irq(pdev, 0); |
| } else { |
| __mpu_error: |
| if (pdev) { |
| pnp_release_card_device(pdev); |
| snd_printk(KERN_ERR PFX "MPU401 pnp configure failure, skipping\n"); |
| } |
| acard->devmpu = NULL; |
| mpu_port[dev] = -1; |
| } |
| |
| kfree (cfg); |
| return 0; |
| } |
| |
| /* same of snd_sbdsp_command by Jaroslav Kysela */ |
| static int __devinit snd_card_azt2320_command(unsigned long port, unsigned char val) |
| { |
| int i; |
| unsigned long limit; |
| |
| limit = jiffies + HZ / 10; |
| for (i = 50000; i && time_after(limit, jiffies); i--) |
| if (!(inb(port + 0x0c) & 0x80)) { |
| outb(val, port + 0x0c); |
| return 0; |
| } |
| return -EBUSY; |
| } |
| |
| static int __devinit snd_card_azt2320_enable_wss(unsigned long port) |
| { |
| int error; |
| |
| if ((error = snd_card_azt2320_command(port, 0x09))) |
| return error; |
| if ((error = snd_card_azt2320_command(port, 0x00))) |
| return error; |
| |
| mdelay(5); |
| return 0; |
| } |
| |
| static int __devinit snd_card_azt2320_probe(int dev, |
| struct pnp_card_link *pcard, |
| const struct pnp_card_device_id *pid) |
| { |
| int error; |
| struct snd_card *card; |
| struct snd_card_azt2320 *acard; |
| struct snd_cs4231 *chip; |
| struct snd_opl3 *opl3; |
| |
| if ((card = snd_card_new(index[dev], id[dev], THIS_MODULE, |
| sizeof(struct snd_card_azt2320))) == NULL) |
| return -ENOMEM; |
| acard = (struct snd_card_azt2320 *)card->private_data; |
| |
| if ((error = snd_card_azt2320_pnp(dev, acard, pcard, pid))) { |
| snd_card_free(card); |
| return error; |
| } |
| snd_card_set_dev(card, &pcard->card->dev); |
| |
| if ((error = snd_card_azt2320_enable_wss(port[dev]))) { |
| snd_card_free(card); |
| return error; |
| } |
| |
| if ((error = snd_cs4231_create(card, wss_port[dev], -1, |
| irq[dev], |
| dma1[dev], |
| dma2[dev], |
| CS4231_HW_DETECT, 0, &chip)) < 0) { |
| snd_card_free(card); |
| return error; |
| } |
| |
| strcpy(card->driver, "AZT2320"); |
| strcpy(card->shortname, "Aztech AZT2320"); |
| sprintf(card->longname, "%s, WSS at 0x%lx, irq %i, dma %i&%i", |
| card->shortname, chip->port, irq[dev], dma1[dev], dma2[dev]); |
| |
| if ((error = snd_cs4231_pcm(chip, 0, NULL)) < 0) { |
| snd_card_free(card); |
| return error; |
| } |
| if ((error = snd_cs4231_mixer(chip)) < 0) { |
| snd_card_free(card); |
| return error; |
| } |
| if ((error = snd_cs4231_timer(chip, 0, NULL)) < 0) { |
| snd_card_free(card); |
| return error; |
| } |
| |
| if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) { |
| if (snd_mpu401_uart_new(card, 0, MPU401_HW_AZT2320, |
| mpu_port[dev], 0, |
| mpu_irq[dev], SA_INTERRUPT, |
| NULL) < 0) |
| snd_printk(KERN_ERR PFX "no MPU-401 device at 0x%lx\n", mpu_port[dev]); |
| } |
| |
| if (fm_port[dev] > 0 && fm_port[dev] != SNDRV_AUTO_PORT) { |
| if (snd_opl3_create(card, |
| fm_port[dev], fm_port[dev] + 2, |
| OPL3_HW_AUTO, 0, &opl3) < 0) { |
| snd_printk(KERN_ERR PFX "no OPL device at 0x%lx-0x%lx\n", |
| fm_port[dev], fm_port[dev] + 2); |
| } else { |
| if ((error = snd_opl3_timer_new(opl3, 1, 2)) < 0) { |
| snd_card_free(card); |
| return error; |
| } |
| if ((error = snd_opl3_hwdep_new(opl3, 0, 1, NULL)) < 0) { |
| snd_card_free(card); |
| return error; |
| } |
| } |
| } |
| |
| if ((error = snd_card_register(card)) < 0) { |
| snd_card_free(card); |
| return error; |
| } |
| pnp_set_card_drvdata(pcard, card); |
| return 0; |
| } |
| |
| static unsigned int __devinitdata azt2320_devices; |
| |
| static int __devinit snd_azt2320_pnp_detect(struct pnp_card_link *card, |
| const struct pnp_card_device_id *id) |
| { |
| static int dev; |
| int res; |
| |
| for ( ; dev < SNDRV_CARDS; dev++) { |
| if (!enable[dev]) |
| continue; |
| res = snd_card_azt2320_probe(dev, card, id); |
| if (res < 0) |
| return res; |
| dev++; |
| azt2320_devices++; |
| return 0; |
| } |
| return -ENODEV; |
| } |
| |
| static void __devexit snd_azt2320_pnp_remove(struct pnp_card_link * pcard) |
| { |
| snd_card_free(pnp_get_card_drvdata(pcard)); |
| pnp_set_card_drvdata(pcard, NULL); |
| } |
| |
| #ifdef CONFIG_PM |
| static int snd_azt2320_pnp_suspend(struct pnp_card_link *pcard, pm_message_t state) |
| { |
| struct snd_card *card = pnp_get_card_drvdata(pcard); |
| struct snd_card_azt2320 *acard = card->private_data; |
| struct snd_cs4231 *chip = acard->chip; |
| |
| snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); |
| chip->suspend(chip); |
| return 0; |
| } |
| |
| static int snd_azt2320_pnp_resume(struct pnp_card_link *pcard) |
| { |
| struct snd_card *card = pnp_get_card_drvdata(pcard); |
| struct snd_card_azt2320 *acard = card->private_data; |
| struct snd_cs4231 *chip = acard->chip; |
| |
| chip->resume(chip); |
| snd_power_change_state(card, SNDRV_CTL_POWER_D0); |
| return 0; |
| } |
| #endif |
| |
| static struct pnp_card_driver azt2320_pnpc_driver = { |
| .flags = PNP_DRIVER_RES_DISABLE, |
| .name = "azt2320", |
| .id_table = snd_azt2320_pnpids, |
| .probe = snd_azt2320_pnp_detect, |
| .remove = __devexit_p(snd_azt2320_pnp_remove), |
| #ifdef CONFIG_PM |
| .suspend = snd_azt2320_pnp_suspend, |
| .resume = snd_azt2320_pnp_resume, |
| #endif |
| }; |
| |
| static int __init alsa_card_azt2320_init(void) |
| { |
| int err; |
| |
| err = pnp_register_card_driver(&azt2320_pnpc_driver); |
| if (err) |
| return err; |
| |
| if (!azt2320_devices) { |
| pnp_unregister_card_driver(&azt2320_pnpc_driver); |
| #ifdef MODULE |
| snd_printk(KERN_ERR "no AZT2320 based soundcards found\n"); |
| #endif |
| return -ENODEV; |
| } |
| return 0; |
| } |
| |
| static void __exit alsa_card_azt2320_exit(void) |
| { |
| pnp_unregister_card_driver(&azt2320_pnpc_driver); |
| } |
| |
| module_init(alsa_card_azt2320_init) |
| module_exit(alsa_card_azt2320_exit) |