drivers/pci/hotplug/pciehp_pci.c - kernel/msm - Gitiles

 /*
  * PCI Express Hot Plug Controller Driver
  *
  * Copyright (C) 1995,2001 Compaq Computer Corporation
  * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
  * Copyright (C) 2001 IBM Corp.
  * Copyright (C) 2003-2004 Intel Corporation
  *
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or (at
  * your option) any later version.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  * NON INFRINGEMENT.  See the GNU General Public License for more
  * details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */

 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include "../pci.h"
 #include "pciehp.h"

 static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp)
 {
 	u16 pci_cmd, pci_bctl;

 	if (hpp->revision > 1) {
 		printk(KERN_WARNING "%s: Rev.%d type0 record not supported\n",
 		       __func__, hpp->revision);
 		return;
 	}

 	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp->cache_line_size);
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp->latency_timer);
 	pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
 	if (hpp->enable_serr)
 		pci_cmd |= PCI_COMMAND_SERR;
 	else
 		pci_cmd &= ~PCI_COMMAND_SERR;
 	if (hpp->enable_perr)
 		pci_cmd |= PCI_COMMAND_PARITY;
 	else
 		pci_cmd &= ~PCI_COMMAND_PARITY;
 	pci_write_config_word(dev, PCI_COMMAND, pci_cmd);

 	/* Program bridge control value */
 	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
 		pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
 				      hpp->latency_timer);
 		pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
 		if (hpp->enable_serr)
 			pci_bctl |= PCI_BRIDGE_CTL_SERR;
 		else
 			pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
 		if (hpp->enable_perr)
 			pci_bctl |= PCI_BRIDGE_CTL_PARITY;
 		else
 			pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
 		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
 	}
 }

 static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp)
 {
 	int pos;
 	u16 reg16;
 	u32 reg32;

 	if (hpp->revision > 1) {
 		printk(KERN_WARNING "%s: Rev.%d type2 record not supported\n",
 		       __func__, hpp->revision);
 		return;
 	}

 	/* Find PCI Express capability */
 	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
 	if (!pos)
 		return;

 	/* Initialize Device Control Register */
 	pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &reg16);
 	reg16 = (reg16 & hpp->pci_exp_devctl_and) | hpp->pci_exp_devctl_or;
 	pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, reg16);

 	/* Initialize Link Control Register */
 	if (dev->subordinate) {
 		pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &reg16);
 		reg16 = (reg16 & hpp->pci_exp_lnkctl_and)
 			| hpp->pci_exp_lnkctl_or;
 		pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, reg16);
 	}

 	/* Find Advanced Error Reporting Enhanced Capability */
 	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
 	if (!pos)
 		return;

 	/* Initialize Uncorrectable Error Mask Register */
 	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, &reg32);
 	reg32 = (reg32 & hpp->unc_err_mask_and) | hpp->unc_err_mask_or;
 	pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, reg32);

 	/* Initialize Uncorrectable Error Severity Register */
 	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &reg32);
 	reg32 = (reg32 & hpp->unc_err_sever_and) | hpp->unc_err_sever_or;
 	pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, reg32);

 	/* Initialize Correctable Error Mask Register */
 	pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, &reg32);
 	reg32 = (reg32 & hpp->cor_err_mask_and) | hpp->cor_err_mask_or;
 	pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg32);

 	/* Initialize Advanced Error Capabilities and Control Register */
 	pci_read_config_dword(dev, pos + PCI_ERR_CAP, &reg32);
 	reg32 = (reg32 & hpp->adv_err_cap_and) | hpp->adv_err_cap_or;
 	pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32);

 	/*
 	 * FIXME: The following two registers are not supported yet.
 	 *
 	 *   o Secondary Uncorrectable Error Severity Register
 	 *   o Secondary Uncorrectable Error Mask Register
 	 */
 }

 static void program_fw_provided_values(struct pci_dev *dev)
 {
 	struct pci_dev *cdev;
 	struct hotplug_params hpp;

 	/* Program hpp values for this device */
 	if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
 			(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
 			(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
 		return;

 	if (pciehp_get_hp_params_from_firmware(dev, &hpp)) {
 		printk(KERN_WARNING "%s: Could not get hotplug parameters\n",
 		       __func__);
 		return;
 	}

 	if (hpp.t2)
 		program_hpp_type2(dev, hpp.t2);
 	if (hpp.t0)
 		program_hpp_type0(dev, hpp.t0);

 	/* Program child devices */
 	if (dev->subordinate) {
 		list_for_each_entry(cdev, &dev->subordinate->devices,
 				    bus_list)
 			program_fw_provided_values(cdev);
 	}
 }

 static int __ref pciehp_add_bridge(struct pci_dev *dev)
 {
 	struct pci_bus *parent = dev->bus;
 	int pass, busnr, start = parent->secondary;
 	int end = parent->subordinate;

 	for (busnr = start; busnr <= end; busnr++) {
 		if (!pci_find_bus(pci_domain_nr(parent), busnr))
 			break;
 	}
 	if (busnr-- > end) {
 		err("No bus number available for hot-added bridge %s\n",
 				pci_name(dev));
 		return -1;
 	}
 	for (pass = 0; pass < 2; pass++)
 		busnr = pci_scan_bridge(parent, dev, busnr, pass);
 	if (!dev->subordinate)
 		return -1;
 	pci_bus_size_bridges(dev->subordinate);
 	pci_bus_assign_resources(parent);
 	pci_enable_bridges(parent);
 	pci_bus_add_devices(parent);
 	return 0;
 }

 int pciehp_configure_device(struct slot *p_slot)
 {
 	struct pci_dev *dev;
 	struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
 	int num, fn;

 	dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
 	if (dev) {
 		err("Device %s already exists at %x:%x, cannot hot-add\n",
 				pci_name(dev), p_slot->bus, p_slot->device);
 		pci_dev_put(dev);
 		return -EINVAL;
 	}

 	num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0));
 	if (num == 0) {
 		err("No new device found\n");
 		return -ENODEV;
 	}

 	for (fn = 0; fn < 8; fn++) {
 		dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
 		if (!dev)
 			continue;
 		if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
 			err("Cannot hot-add display device %s\n",
 					pci_name(dev));
 			pci_dev_put(dev);
 			continue;
 		}
 		if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
 				(dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
 			pciehp_add_bridge(dev);
 		}
 		program_fw_provided_values(dev);
 		pci_dev_put(dev);
 	}

 	pci_bus_assign_resources(parent);
 	pci_bus_add_devices(parent);
 	return 0;
 }

 int pciehp_unconfigure_device(struct slot *p_slot)
 {
 	int ret, rc = 0;
 	int j;
 	u8 bctl = 0;
 	u8 presence = 0;
 	struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
 	u16 command;

 	dbg("%s: bus/dev = %x/%x\n", __func__, p_slot->bus,
 				p_slot->device);
 	ret = p_slot->hpc_ops->get_adapter_status(p_slot, &presence);
 	if (ret)
 		presence = 0;

 	for (j = 0; j < 8; j++) {
 		struct pci_dev* temp = pci_get_slot(parent,
 				(p_slot->device << 3) | j);
 		if (!temp)
 			continue;
 		if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
 			err("Cannot remove display device %s\n",
 					pci_name(temp));
 			pci_dev_put(temp);
 			continue;
 		}
 		if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) {
 			pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
 			if (bctl & PCI_BRIDGE_CTL_VGA) {
 				err("Cannot remove display device %s\n",
 				    pci_name(temp));
 				pci_dev_put(temp);
 				continue;
 			}
 		}
 		pci_remove_bus_device(temp);
 		/*
 		 * Ensure that no new Requests will be generated from
 		 * the device.
 		 */
 		if (presence) {
 			pci_read_config_word(temp, PCI_COMMAND, &command);
 			command &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
 			command |= PCI_COMMAND_INTX_DISABLE;
 			pci_write_config_word(temp, PCI_COMMAND, command);
 		}
 		pci_dev_put(temp);
 	}
 	/*
 	 * Some PCI Express root ports require fixup after hot-plug operation.
 	 */
 	if (pcie_mch_quirk)
 		pci_fixup_device(pci_fixup_final, p_slot->ctrl->pci_dev);

 	return rc;
 }
	/*
	* PCI Express Hot Plug Controller Driver
	*
	* Copyright (C) 1995,2001 Compaq Computer Corporation
	* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
	* Copyright (C) 2001 IBM Corp.
	* Copyright (C) 2003-2004 Intel Corporation
	*
	* All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or (at
	* your option) any later version.
	*
	* This program is distributed in the hope that it will be useful, but
	* WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
	* NON INFRINGEMENT. See the GNU General Public License for more
	* details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	*
	* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
	*
	*/

	#include <linux/module.h>
	#include <linux/kernel.h>
	#include <linux/types.h>
	#include <linux/pci.h>
	#include "../pci.h"
	#include "pciehp.h"

	static void program_hpp_type0(struct pci_dev dev, struct hpp_type0 hpp)
	{
	u16 pci_cmd, pci_bctl;

	if (hpp->revision > 1) {
	printk(KERN_WARNING "%s: Rev.%d type0 record not supported\n",
	__func__, hpp->revision);
	return;
	}

	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp->cache_line_size);
	pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp->latency_timer);
	pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
	if (hpp->enable_serr)
	pci_cmd \|= PCI_COMMAND_SERR;
	else
	pci_cmd &= ~PCI_COMMAND_SERR;
	if (hpp->enable_perr)
	pci_cmd \|= PCI_COMMAND_PARITY;
	else
	pci_cmd &= ~PCI_COMMAND_PARITY;
	pci_write_config_word(dev, PCI_COMMAND, pci_cmd);

	/* Program bridge control value */
	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
	pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
	hpp->latency_timer);
	pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
	if (hpp->enable_serr)
	pci_bctl \|= PCI_BRIDGE_CTL_SERR;
	else
	pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
	if (hpp->enable_perr)
	pci_bctl \|= PCI_BRIDGE_CTL_PARITY;
	else
	pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
	}
	}

	static void program_hpp_type2(struct pci_dev dev, struct hpp_type2 hpp)
	{
	int pos;
	u16 reg16;
	u32 reg32;

	if (hpp->revision > 1) {
	printk(KERN_WARNING "%s: Rev.%d type2 record not supported\n",
	__func__, hpp->revision);
	return;
	}

	/* Find PCI Express capability */
	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
	if (!pos)
	return;

	/* Initialize Device Control Register */
	pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &reg16);
	reg16 = (reg16 & hpp->pci_exp_devctl_and) \| hpp->pci_exp_devctl_or;
	pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, reg16);

	/* Initialize Link Control Register */
	if (dev->subordinate) {
	pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &reg16);
	reg16 = (reg16 & hpp->pci_exp_lnkctl_and)
	\| hpp->pci_exp_lnkctl_or;
	pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, reg16);
	}

	/* Find Advanced Error Reporting Enhanced Capability */
	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
	if (!pos)
	return;

	/* Initialize Uncorrectable Error Mask Register */
	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, &reg32);
	reg32 = (reg32 & hpp->unc_err_mask_and) \| hpp->unc_err_mask_or;
	pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, reg32);

	/* Initialize Uncorrectable Error Severity Register */
	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &reg32);
	reg32 = (reg32 & hpp->unc_err_sever_and) \| hpp->unc_err_sever_or;
	pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, reg32);

	/* Initialize Correctable Error Mask Register */
	pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, &reg32);
	reg32 = (reg32 & hpp->cor_err_mask_and) \| hpp->cor_err_mask_or;
	pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg32);

	/* Initialize Advanced Error Capabilities and Control Register */
	pci_read_config_dword(dev, pos + PCI_ERR_CAP, &reg32);
	reg32 = (reg32 & hpp->adv_err_cap_and) \| hpp->adv_err_cap_or;
	pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32);

	/*
	* FIXME: The following two registers are not supported yet.
	*
	* o Secondary Uncorrectable Error Severity Register
	* o Secondary Uncorrectable Error Mask Register
	*/
	}

	static void program_fw_provided_values(struct pci_dev *dev)
	{
	struct pci_dev *cdev;
	struct hotplug_params hpp;

	/* Program hpp values for this device */
	if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL \|\|
	(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
	(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
	return;

	if (pciehp_get_hp_params_from_firmware(dev, &hpp)) {
	printk(KERN_WARNING "%s: Could not get hotplug parameters\n",
	__func__);
	return;
	}

	if (hpp.t2)
	program_hpp_type2(dev, hpp.t2);
	if (hpp.t0)
	program_hpp_type0(dev, hpp.t0);

	/* Program child devices */
	if (dev->subordinate) {
	list_for_each_entry(cdev, &dev->subordinate->devices,
	bus_list)
	program_fw_provided_values(cdev);
	}
	}

	static int __ref pciehp_add_bridge(struct pci_dev *dev)
	{
	struct pci_bus *parent = dev->bus;
	int pass, busnr, start = parent->secondary;
	int end = parent->subordinate;

	for (busnr = start; busnr <= end; busnr++) {
	if (!pci_find_bus(pci_domain_nr(parent), busnr))
	break;
	}
	if (busnr-- > end) {
	err("No bus number available for hot-added bridge %s\n",
	pci_name(dev));
	return -1;
	}
	for (pass = 0; pass < 2; pass++)
	busnr = pci_scan_bridge(parent, dev, busnr, pass);
	if (!dev->subordinate)
	return -1;
	pci_bus_size_bridges(dev->subordinate);
	pci_bus_assign_resources(parent);
	pci_enable_bridges(parent);
	pci_bus_add_devices(parent);
	return 0;
	}

	int pciehp_configure_device(struct slot *p_slot)
	{
	struct pci_dev *dev;
	struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
	int num, fn;

	dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
	if (dev) {
	err("Device %s already exists at %x:%x, cannot hot-add\n",
	pci_name(dev), p_slot->bus, p_slot->device);
	pci_dev_put(dev);
	return -EINVAL;
	}

	num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0));
	if (num == 0) {
	err("No new device found\n");
	return -ENODEV;
	}

	for (fn = 0; fn < 8; fn++) {
	dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
	if (!dev)
	continue;
	if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
	err("Cannot hot-add display device %s\n",
	pci_name(dev));
	pci_dev_put(dev);
	continue;
	}
	if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) \|\|
	(dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
	pciehp_add_bridge(dev);
	}
	program_fw_provided_values(dev);
	pci_dev_put(dev);
	}

	pci_bus_assign_resources(parent);
	pci_bus_add_devices(parent);
	return 0;
	}

	int pciehp_unconfigure_device(struct slot *p_slot)
	{
	int ret, rc = 0;
	int j;
	u8 bctl = 0;
	u8 presence = 0;
	struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
	u16 command;

	dbg("%s: bus/dev = %x/%x\n", __func__, p_slot->bus,
	p_slot->device);
	ret = p_slot->hpc_ops->get_adapter_status(p_slot, &presence);
	if (ret)
	presence = 0;

	for (j = 0; j < 8; j++) {
	struct pci_dev* temp = pci_get_slot(parent,
	(p_slot->device << 3) \| j);
	if (!temp)
	continue;
	if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
	err("Cannot remove display device %s\n",
	pci_name(temp));
	pci_dev_put(temp);
	continue;
	}
	if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) {
	pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
	if (bctl & PCI_BRIDGE_CTL_VGA) {
	err("Cannot remove display device %s\n",
	pci_name(temp));
	pci_dev_put(temp);
	continue;
	}
	}
	pci_remove_bus_device(temp);
	/*
	* Ensure that no new Requests will be generated from
	* the device.
	*/
	if (presence) {
	pci_read_config_word(temp, PCI_COMMAND, &command);
	command &= ~(PCI_COMMAND_MASTER \| PCI_COMMAND_SERR);
	command \|= PCI_COMMAND_INTX_DISABLE;
	pci_write_config_word(temp, PCI_COMMAND, command);
	}
	pci_dev_put(temp);
	}
	/*
	* Some PCI Express root ports require fixup after hot-plug operation.
	*/
	if (pcie_mch_quirk)
	pci_fixup_device(pci_fixup_final, p_slot->ctrl->pci_dev);

	return rc;
	}