[PATCH] powerpc/pseries: Change H_StudlyCaps to H_SHOUTING_CAPS
Also cleans up some nearby whitespace problems.
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 1b73508..8be6877 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -149,17 +149,17 @@
if (rc == 0) /* success, return */
return;
/* check for null tag ? */
- if (rc == H_Hardware)
+ if (rc == H_HARDWARE)
printk(KERN_INFO
"plpar-hcall (%s) failed with hardware fault\n", tag);
- else if (rc == H_Function)
+ else if (rc == H_FUNCTION)
printk(KERN_INFO
"plpar-hcall (%s) failed; function not allowed\n", tag);
- else if (rc == H_Authority)
+ else if (rc == H_AUTHORITY)
printk(KERN_INFO
- "plpar-hcall (%s) failed; not authorized to this function\n",
- tag);
- else if (rc == H_Parameter)
+ "plpar-hcall (%s) failed; not authorized to this"
+ " function\n", tag);
+ else if (rc == H_PARAMETER)
printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n",
tag);
else
@@ -209,7 +209,7 @@
unsigned long dummy;
rc = plpar_hcall(H_PIC, 0, 0, 0, 0, pool_idle_time, num_procs, &dummy);
- if (rc != H_Authority)
+ if (rc != H_AUTHORITY)
log_plpar_hcall_return(rc, "H_PIC");
}
@@ -529,13 +529,13 @@
retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
*new_weight_ptr);
- if (retval == H_Success || retval == H_Constrained) {
+ if (retval == H_SUCCESS || retval == H_CONSTRAINED) {
retval = count;
- } else if (retval == H_Busy) {
+ } else if (retval == H_BUSY) {
retval = -EBUSY;
- } else if (retval == H_Hardware) {
+ } else if (retval == H_HARDWARE) {
retval = -EIO;
- } else if (retval == H_Parameter) {
+ } else if (retval == H_PARAMETER) {
retval = -EINVAL;
} else {
printk(KERN_WARNING "%s: received unknown hv return code %ld",
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 06636c9..0112318 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -578,18 +578,18 @@
* We use "waiting" to indicate our state. As long
* as it is >0, we are still trying to all join up.
* If it goes to 0, we have successfully joined up and
- * one thread got H_Continue. If any error happens,
+ * one thread got H_CONTINUE. If any error happens,
* we set it to <0.
*/
local_irq_save(flags);
do {
rc = plpar_hcall_norets(H_JOIN);
smp_rmb();
- } while (rc == H_Success && data->waiting > 0);
- if (rc == H_Success)
+ } while (rc == H_SUCCESS && data->waiting > 0);
+ if (rc == H_SUCCESS)
goto out;
- if (rc == H_Continue) {
+ if (rc == H_CONTINUE) {
data->waiting = 0;
data->args->args[data->args->nargs] =
rtas_call(ibm_suspend_me_token, 0, 1, NULL);
@@ -597,7 +597,7 @@
plpar_hcall_norets(H_PROD,i);
} else {
data->waiting = -EBUSY;
- printk(KERN_ERR "Error on H_Join hypervisor call\n");
+ printk(KERN_ERR "Error on H_JOIN hypervisor call\n");
}
out:
@@ -624,7 +624,7 @@
printk(KERN_ERR "Error doing global join\n");
/* Prod each CPU. This won't hurt, and will wake
- * anyone we successfully put to sleep with H_Join
+ * anyone we successfully put to sleep with H_JOIN.
*/
for_each_possible_cpu(i)
plpar_hcall_norets(H_PROD, i);
diff --git a/arch/powerpc/platforms/pseries/hvconsole.c b/arch/powerpc/platforms/pseries/hvconsole.c
index ba6befd..a72a987 100644
--- a/arch/powerpc/platforms/pseries/hvconsole.c
+++ b/arch/powerpc/platforms/pseries/hvconsole.c
@@ -41,7 +41,7 @@
unsigned long got;
if (plpar_hcall(H_GET_TERM_CHAR, vtermno, 0, 0, 0, &got,
- (unsigned long *)buf, (unsigned long *)buf+1) == H_Success)
+ (unsigned long *)buf, (unsigned long *)buf+1) == H_SUCCESS)
return got;
return 0;
}
@@ -69,9 +69,9 @@
ret = plpar_hcall_norets(H_PUT_TERM_CHAR, vtermno, count, lbuf[0],
lbuf[1]);
- if (ret == H_Success)
+ if (ret == H_SUCCESS)
return count;
- if (ret == H_Busy)
+ if (ret == H_BUSY)
return 0;
return -EIO;
}
diff --git a/arch/powerpc/platforms/pseries/hvcserver.c b/arch/powerpc/platforms/pseries/hvcserver.c
index 22bfb5c..fcf4b4c 100644
--- a/arch/powerpc/platforms/pseries/hvcserver.c
+++ b/arch/powerpc/platforms/pseries/hvcserver.c
@@ -43,21 +43,21 @@
static int hvcs_convert(long to_convert)
{
switch (to_convert) {
- case H_Success:
+ case H_SUCCESS:
return 0;
- case H_Parameter:
+ case H_PARAMETER:
return -EINVAL;
- case H_Hardware:
+ case H_HARDWARE:
return -EIO;
- case H_Busy:
- case H_LongBusyOrder1msec:
- case H_LongBusyOrder10msec:
- case H_LongBusyOrder100msec:
- case H_LongBusyOrder1sec:
- case H_LongBusyOrder10sec:
- case H_LongBusyOrder100sec:
+ case H_BUSY:
+ case H_LONG_BUSY_ORDER_1_MSEC:
+ case H_LONG_BUSY_ORDER_10_MSEC:
+ case H_LONG_BUSY_ORDER_100_MSEC:
+ case H_LONG_BUSY_ORDER_1_SEC:
+ case H_LONG_BUSY_ORDER_10_SEC:
+ case H_LONG_BUSY_ORDER_100_SEC:
return -EBUSY;
- case H_Function: /* fall through */
+ case H_FUNCTION: /* fall through */
default:
return -EPERM;
}
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 8952528..c72c091 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -72,7 +72,7 @@
do {
rc = plpar_put_term_char(vtermno, sizeof(packet), packet);
- } while (rc == H_Busy);
+ } while (rc == H_BUSY);
}
static long hvsi_udbg_buf_len;
@@ -85,7 +85,7 @@
if (hvsi_udbg_buf_len == 0) {
rc = plpar_get_term_char(vtermno, &hvsi_udbg_buf_len, hvsi_udbg_buf);
- if (rc != H_Success || hvsi_udbg_buf[0] != 0xff) {
+ if (rc != H_SUCCESS || hvsi_udbg_buf[0] != 0xff) {
/* bad read or non-data packet */
hvsi_udbg_buf_len = 0;
} else {
@@ -139,7 +139,7 @@
buf[0] = c;
do {
rc = plpar_put_term_char(vtermno, 1, buf);
- } while(rc == H_Busy);
+ } while(rc == H_BUSY);
}
/* Buffered chars getc */
@@ -158,7 +158,7 @@
/* get some more chars. */
inbuflen = 0;
rc = plpar_get_term_char(vtermno, &inbuflen, buf);
- if (rc != H_Success)
+ if (rc != H_SUCCESS)
inbuflen = 0; /* otherwise inbuflen is garbage */
}
if (inbuflen <= 0 || inbuflen > 16) {
@@ -304,7 +304,7 @@
lpar_rc = plpar_hcall(H_ENTER, flags, hpte_group, hpte_v,
hpte_r, &slot, &dummy0, &dummy1);
- if (unlikely(lpar_rc == H_PTEG_Full)) {
+ if (unlikely(lpar_rc == H_PTEG_FULL)) {
if (!(vflags & HPTE_V_BOLTED))
DBG_LOW(" full\n");
return -1;
@@ -315,7 +315,7 @@
* will fail. However we must catch the failure in hash_page
* or we will loop forever, so return -2 in this case.
*/
- if (unlikely(lpar_rc != H_Success)) {
+ if (unlikely(lpar_rc != H_SUCCESS)) {
if (!(vflags & HPTE_V_BOLTED))
DBG_LOW(" lpar err %d\n", lpar_rc);
return -2;
@@ -346,9 +346,9 @@
/* don't remove a bolted entry */
lpar_rc = plpar_pte_remove(H_ANDCOND, hpte_group + slot_offset,
(0x1UL << 4), &dummy1, &dummy2);
- if (lpar_rc == H_Success)
+ if (lpar_rc == H_SUCCESS)
return i;
- BUG_ON(lpar_rc != H_Not_Found);
+ BUG_ON(lpar_rc != H_NOT_FOUND);
slot_offset++;
slot_offset &= 0x7;
@@ -391,14 +391,14 @@
lpar_rc = plpar_pte_protect(flags, slot, want_v & HPTE_V_AVPN);
- if (lpar_rc == H_Not_Found) {
+ if (lpar_rc == H_NOT_FOUND) {
DBG_LOW("not found !\n");
return -1;
}
DBG_LOW("ok\n");
- BUG_ON(lpar_rc != H_Success);
+ BUG_ON(lpar_rc != H_SUCCESS);
return 0;
}
@@ -417,7 +417,7 @@
lpar_rc = plpar_pte_read(flags, slot, &dword0, &dummy_word1);
- BUG_ON(lpar_rc != H_Success);
+ BUG_ON(lpar_rc != H_SUCCESS);
return dword0;
}
@@ -468,7 +468,7 @@
flags = newpp & 7;
lpar_rc = plpar_pte_protect(flags, slot, 0);
- BUG_ON(lpar_rc != H_Success);
+ BUG_ON(lpar_rc != H_SUCCESS);
}
static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
@@ -484,10 +484,10 @@
want_v = hpte_encode_v(va, psize);
lpar_rc = plpar_pte_remove(H_AVPN, slot, want_v & HPTE_V_AVPN,
&dummy1, &dummy2);
- if (lpar_rc == H_Not_Found)
+ if (lpar_rc == H_NOT_FOUND)
return;
- BUG_ON(lpar_rc != H_Success);
+ BUG_ON(lpar_rc != H_SUCCESS);
}
/*
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index b2fbf8b..5eb55ef 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -463,7 +463,7 @@
* very low priority. The cede enables interrupts, which
* doesn't matter here.
*/
- if (!lppaca[cpu ^ 1].idle || poll_pending() == H_Pending)
+ if (!lppaca[cpu ^ 1].idle || poll_pending() == H_PENDING)
cede_processor();
out:
diff --git a/arch/powerpc/platforms/pseries/vio.c b/arch/powerpc/platforms/pseries/vio.c
index 866379b..8e53e04 100644
--- a/arch/powerpc/platforms/pseries/vio.c
+++ b/arch/powerpc/platforms/pseries/vio.c
@@ -258,7 +258,7 @@
int vio_enable_interrupts(struct vio_dev *dev)
{
int rc = h_vio_signal(dev->unit_address, VIO_IRQ_ENABLE);
- if (rc != H_Success)
+ if (rc != H_SUCCESS)
printk(KERN_ERR "vio: Error 0x%x enabling interrupts\n", rc);
return rc;
}
@@ -267,7 +267,7 @@
int vio_disable_interrupts(struct vio_dev *dev)
{
int rc = h_vio_signal(dev->unit_address, VIO_IRQ_DISABLE);
- if (rc != H_Success)
+ if (rc != H_SUCCESS)
printk(KERN_ERR "vio: Error 0x%x disabling interrupts\n", rc);
return rc;
}
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 4864cb3..2d60ea3 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -168,7 +168,7 @@
unsigned long return_value;
lpar_rc = plpar_xirr(&return_value);
- if (lpar_rc != H_Success)
+ if (lpar_rc != H_SUCCESS)
panic(" bad return code xirr - rc = %lx \n", lpar_rc);
return (int)return_value;
}
@@ -179,7 +179,7 @@
unsigned long val64 = value & 0xffffffff;
lpar_rc = plpar_eoi(val64);
- if (lpar_rc != H_Success)
+ if (lpar_rc != H_SUCCESS)
panic("bad return code EOI - rc = %ld, value=%lx\n", lpar_rc,
val64);
}
@@ -189,7 +189,7 @@
unsigned long lpar_rc;
lpar_rc = plpar_cppr(value);
- if (lpar_rc != H_Success)
+ if (lpar_rc != H_SUCCESS)
panic("bad return code cppr - rc = %lx\n", lpar_rc);
}
@@ -198,7 +198,7 @@
unsigned long lpar_rc;
lpar_rc = plpar_ipi(get_hard_smp_processor_id(n_cpu), value);
- if (lpar_rc != H_Success)
+ if (lpar_rc != H_SUCCESS)
panic("bad return code qirr - rc = %lx\n", lpar_rc);
}
diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c
index 327b00c..8d97b39 100644
--- a/drivers/char/hvcs.c
+++ b/drivers/char/hvcs.c
@@ -904,7 +904,7 @@
* It is possible the vty-server was removed after the irq was
* requested but before we have time to enable interrupts.
*/
- if (vio_enable_interrupts(vdev) == H_Success)
+ if (vio_enable_interrupts(vdev) == H_SUCCESS)
return 0;
else {
printk(KERN_ERR "HVCS: int enable failed for"
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index ceb98fd..52d0102 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -235,7 +235,7 @@
lpar_rc = h_add_logical_lan_buffer(adapter->vdev->unit_address, desc.desc);
- if(lpar_rc != H_Success) {
+ if(lpar_rc != H_SUCCESS) {
pool->free_map[free_index] = index;
pool->skbuff[index] = NULL;
pool->consumer_index--;
@@ -373,7 +373,7 @@
lpar_rc = h_add_logical_lan_buffer(adapter->vdev->unit_address, desc.desc);
- if(lpar_rc != H_Success) {
+ if(lpar_rc != H_SUCCESS) {
ibmveth_debug_printk("h_add_logical_lan_buffer failed during recycle rc=%ld", lpar_rc);
ibmveth_remove_buffer_from_pool(adapter, adapter->rx_queue.queue_addr[adapter->rx_queue.index].correlator);
}
@@ -511,7 +511,7 @@
adapter->filter_list_dma,
mac_address);
- if(lpar_rc != H_Success) {
+ if(lpar_rc != H_SUCCESS) {
ibmveth_error_printk("h_register_logical_lan failed with %ld\n", lpar_rc);
ibmveth_error_printk("buffer TCE:0x%lx filter TCE:0x%lx rxq desc:0x%lx MAC:0x%lx\n",
adapter->buffer_list_dma,
@@ -527,7 +527,7 @@
ibmveth_error_printk("unable to request irq 0x%x, rc %d\n", netdev->irq, rc);
do {
rc = h_free_logical_lan(adapter->vdev->unit_address);
- } while (H_isLongBusy(rc) || (rc == H_Busy));
+ } while (H_IS_LONG_BUSY(rc) || (rc == H_BUSY));
ibmveth_cleanup(adapter);
return rc;
@@ -556,9 +556,9 @@
do {
lpar_rc = h_free_logical_lan(adapter->vdev->unit_address);
- } while (H_isLongBusy(lpar_rc) || (lpar_rc == H_Busy));
+ } while (H_IS_LONG_BUSY(lpar_rc) || (lpar_rc == H_BUSY));
- if(lpar_rc != H_Success)
+ if(lpar_rc != H_SUCCESS)
{
ibmveth_error_printk("h_free_logical_lan failed with %lx, continuing with close\n",
lpar_rc);
@@ -693,9 +693,9 @@
desc[4].desc,
desc[5].desc,
correlator);
- } while ((lpar_rc == H_Busy) && (retry_count--));
+ } while ((lpar_rc == H_BUSY) && (retry_count--));
- if(lpar_rc != H_Success && lpar_rc != H_Dropped) {
+ if(lpar_rc != H_SUCCESS && lpar_rc != H_DROPPED) {
int i;
ibmveth_error_printk("tx: h_send_logical_lan failed with rc=%ld\n", lpar_rc);
for(i = 0; i < 6; i++) {
@@ -786,14 +786,14 @@
/* we think we are done - reenable interrupts, then check once more to make sure we are done */
lpar_rc = h_vio_signal(adapter->vdev->unit_address, VIO_IRQ_ENABLE);
- ibmveth_assert(lpar_rc == H_Success);
+ ibmveth_assert(lpar_rc == H_SUCCESS);
netif_rx_complete(netdev);
if(ibmveth_rxq_pending_buffer(adapter) && netif_rx_reschedule(netdev, frames_processed))
{
lpar_rc = h_vio_signal(adapter->vdev->unit_address, VIO_IRQ_DISABLE);
- ibmveth_assert(lpar_rc == H_Success);
+ ibmveth_assert(lpar_rc == H_SUCCESS);
more_work = 1;
goto restart_poll;
}
@@ -813,7 +813,7 @@
if(netif_rx_schedule_prep(netdev)) {
lpar_rc = h_vio_signal(adapter->vdev->unit_address, VIO_IRQ_DISABLE);
- ibmveth_assert(lpar_rc == H_Success);
+ ibmveth_assert(lpar_rc == H_SUCCESS);
__netif_rx_schedule(netdev);
}
return IRQ_HANDLED;
@@ -835,7 +835,7 @@
IbmVethMcastEnableRecv |
IbmVethMcastDisableFiltering,
0);
- if(lpar_rc != H_Success) {
+ if(lpar_rc != H_SUCCESS) {
ibmveth_error_printk("h_multicast_ctrl rc=%ld when entering promisc mode\n", lpar_rc);
}
} else {
@@ -847,7 +847,7 @@
IbmVethMcastDisableFiltering |
IbmVethMcastClearFilterTable,
0);
- if(lpar_rc != H_Success) {
+ if(lpar_rc != H_SUCCESS) {
ibmveth_error_printk("h_multicast_ctrl rc=%ld when attempting to clear filter table\n", lpar_rc);
}
/* add the addresses to the filter table */
@@ -858,7 +858,7 @@
lpar_rc = h_multicast_ctrl(adapter->vdev->unit_address,
IbmVethMcastAddFilter,
mcast_addr);
- if(lpar_rc != H_Success) {
+ if(lpar_rc != H_SUCCESS) {
ibmveth_error_printk("h_multicast_ctrl rc=%ld when adding an entry to the filter table\n", lpar_rc);
}
}
@@ -867,7 +867,7 @@
lpar_rc = h_multicast_ctrl(adapter->vdev->unit_address,
IbmVethMcastEnableFiltering,
0);
- if(lpar_rc != H_Success) {
+ if(lpar_rc != H_SUCCESS) {
ibmveth_error_printk("h_multicast_ctrl rc=%ld when enabling filtering\n", lpar_rc);
}
}
diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c
index f47dd87..892e8ed 100644
--- a/drivers/scsi/ibmvscsi/rpa_vscsi.c
+++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c
@@ -80,7 +80,7 @@
tasklet_kill(&hostdata->srp_task);
do {
rc = plpar_hcall_norets(H_FREE_CRQ, vdev->unit_address);
- } while ((rc == H_Busy) || (H_isLongBusy(rc)));
+ } while ((rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
dma_unmap_single(hostdata->dev,
queue->msg_token,
queue->size * sizeof(*queue->msgs), DMA_BIDIRECTIONAL);
@@ -230,7 +230,7 @@
rc = plpar_hcall_norets(H_REG_CRQ,
vdev->unit_address,
queue->msg_token, PAGE_SIZE);
- if (rc == H_Resource)
+ if (rc == H_RESOURCE)
/* maybe kexecing and resource is busy. try a reset */
rc = ibmvscsi_reset_crq_queue(queue,
hostdata);
@@ -269,7 +269,7 @@
req_irq_failed:
do {
rc = plpar_hcall_norets(H_FREE_CRQ, vdev->unit_address);
- } while ((rc == H_Busy) || (H_isLongBusy(rc)));
+ } while ((rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
reg_crq_failed:
dma_unmap_single(hostdata->dev,
queue->msg_token,
@@ -295,7 +295,7 @@
/* Re-enable the CRQ */
do {
rc = plpar_hcall_norets(H_ENABLE_CRQ, vdev->unit_address);
- } while ((rc == H_InProgress) || (rc == H_Busy) || (H_isLongBusy(rc)));
+ } while ((rc == H_IN_PROGRESS) || (rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
if (rc)
printk(KERN_ERR "ibmvscsi: Error %d enabling adapter\n", rc);
@@ -317,7 +317,7 @@
/* Close the CRQ */
do {
rc = plpar_hcall_norets(H_FREE_CRQ, vdev->unit_address);
- } while ((rc == H_Busy) || (H_isLongBusy(rc)));
+ } while ((rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
/* Clean out the queue */
memset(queue->msgs, 0x00, PAGE_SIZE);
diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h
index b72c04f..029afae 100644
--- a/include/asm-powerpc/hvcall.h
+++ b/include/asm-powerpc/hvcall.h
@@ -4,47 +4,54 @@
#define HVSC .long 0x44000022
-#define H_Success 0
-#define H_Busy 1 /* Hardware busy -- retry later */
-#define H_Closed 2 /* Resource closed */
-#define H_Constrained 4 /* Resource request constrained to max allowed */
-#define H_InProgress 14 /* Kind of like busy */
-#define H_Pending 17 /* returned from H_POLL_PENDING */
-#define H_Continue 18 /* Returned from H_Join on success */
-#define H_LongBusyStartRange 9900 /* Start of long busy range */
-#define H_LongBusyOrder1msec 9900 /* Long busy, hint that 1msec is a good time to retry */
-#define H_LongBusyOrder10msec 9901 /* Long busy, hint that 10msec is a good time to retry */
-#define H_LongBusyOrder100msec 9902 /* Long busy, hint that 100msec is a good time to retry */
-#define H_LongBusyOrder1sec 9903 /* Long busy, hint that 1sec is a good time to retry */
-#define H_LongBusyOrder10sec 9904 /* Long busy, hint that 10sec is a good time to retry */
-#define H_LongBusyOrder100sec 9905 /* Long busy, hint that 100sec is a good time to retry */
-#define H_LongBusyEndRange 9905 /* End of long busy range */
-#define H_Hardware -1 /* Hardware error */
-#define H_Function -2 /* Function not supported */
-#define H_Privilege -3 /* Caller not privileged */
-#define H_Parameter -4 /* Parameter invalid, out-of-range or conflicting */
-#define H_Bad_Mode -5 /* Illegal msr value */
-#define H_PTEG_Full -6 /* PTEG is full */
-#define H_Not_Found -7 /* PTE was not found" */
-#define H_Reserved_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
-#define H_NoMem -9
-#define H_Authority -10
-#define H_Permission -11
-#define H_Dropped -12
-#define H_SourceParm -13
-#define H_DestParm -14
-#define H_RemoteParm -15
-#define H_Resource -16
+#define H_SUCCESS 0
+#define H_BUSY 1 /* Hardware busy -- retry later */
+#define H_CLOSED 2 /* Resource closed */
+#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */
+#define H_IN_PROGRESS 14 /* Kind of like busy */
+#define H_PENDING 17 /* returned from H_POLL_PENDING */
+#define H_CONTINUE 18 /* Returned from H_Join on success */
+#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */
+#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \
+ is a good time to retry */
+#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */
+#define H_HARDWARE -1 /* Hardware error */
+#define H_FUNCTION -2 /* Function not supported */
+#define H_PRIVILEGE -3 /* Caller not privileged */
+#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */
+#define H_BAD_MODE -5 /* Illegal msr value */
+#define H_PTEG_FULL -6 /* PTEG is full */
+#define H_NOT_FOUND -7 /* PTE was not found" */
+#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
+#define H_NO_MEM -9
+#define H_AUTHORITY -10
+#define H_PERMISSION -11
+#define H_DROPPED -12
+#define H_SOURCE_PARM -13
+#define H_DEST_PARM -14
+#define H_REMOTE_PARM -15
+#define H_RESOURCE -16
/* Long Busy is a condition that can be returned by the firmware
* when a call cannot be completed now, but the identical call
* should be retried later. This prevents calls blocking in the
- * firmware for long periods of time. Annoyingly the firmware can return
+ * firmware for long periods of time. Annoyingly the firmware can return
* a range of return codes, hinting at how long we should wait before
* retrying. If you don't care for the hint, the macro below is a good
* way to check for the long_busy return codes
*/
-#define H_isLongBusy(x) ((x >= H_LongBusyStartRange) && (x <= H_LongBusyEndRange))
+#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \
+ && (x <= H_LONG_BUSY_END_RANGE))
/* Flags */
#define H_LARGE_PAGE (1UL<<(63-16))
@@ -99,25 +106,25 @@
#define H_PERFMON 0x7c
#define H_MIGRATE_DMA 0x78
#define H_REGISTER_VPA 0xDC
-#define H_CEDE 0xE0
+#define H_CEDE 0xE0
#define H_CONFER 0xE4
-#define H_PROD 0xE8
+#define H_PROD 0xE8
#define H_GET_PPP 0xEC
#define H_SET_PPP 0xF0
#define H_PURR 0xF4
-#define H_PIC 0xF8
+#define H_PIC 0xF8
#define H_REG_CRQ 0xFC
#define H_FREE_CRQ 0x100
#define H_VIO_SIGNAL 0x104
#define H_SEND_CRQ 0x108
-#define H_COPY_RDMA 0x110
+#define H_COPY_RDMA 0x110
#define H_SET_XDABR 0x134
#define H_STUFF_TCE 0x138
#define H_PUT_TCE_INDIRECT 0x13C
#define H_VTERM_PARTNER_INFO 0x150
#define H_REGISTER_VTERM 0x154
#define H_FREE_VTERM 0x158
-#define H_POLL_PENDING 0x1D8
+#define H_POLL_PENDING 0x1D8
#define H_JOIN 0x298
#define H_ENABLE_CRQ 0x2B0
@@ -152,7 +159,7 @@
*/
long plpar_hcall_8arg_2ret(unsigned long opcode,
unsigned long arg1,
- unsigned long arg2,
+ unsigned long arg2,
unsigned long arg3,
unsigned long arg4,
unsigned long arg5,