Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm / 717293af1b594649ba6867cae699957175f28b42 / . / arch / arm / mach-msm / board-8960.c
blob: 95f618a5b9886884a99be0e34f20b5b28d9bfedc [file] [log] [blame]
/* Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/i2c/sx150x.h>
#include <linux/i2c/isl9519.h>
#include <linux/gpio.h>
#include <linux/msm_ssbi.h>
#include <linux/regulator/msm-gpio-regulator.h>
#include <linux/mfd/pm8xxx/pm8921.h>
#include <linux/mfd/pm8xxx/pm8xxx-adc.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
#include <linux/slimbus/slimbus.h>
#include <linux/bootmem.h>
#ifdef CONFIG_ANDROID_PMEM
#include <linux/android_pmem.h>
#endif
#include <linux/cyttsp-qc.h>
#include <linux/dma-contiguous.h>
#include <linux/dma-mapping.h>
#include <linux/platform_data/qcom_crypto_device.h>
#include <linux/platform_data/qcom_wcnss_device.h>
#include <linux/leds.h>
#include <linux/leds-pm8xxx.h>
#include <linux/i2c/atmel_mxt_ts.h>
#include <linux/msm_tsens.h>
#include <linux/ks8851.h>
#include <linux/i2c/isa1200.h>
#include <linux/memory.h>
#include <linux/memblock.h>
#include <linux/msm_thermal.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/setup.h>
#include <asm/hardware/gic.h>
#include <asm/mach/mmc.h>
#include <mach/board.h>
#include <mach/msm_tspp.h>
#include <mach/msm_iomap.h>
#include <mach/msm_spi.h>
#include <mach/msm_serial_hs.h>
#ifdef CONFIG_USB_MSM_OTG_72K
#include <mach/msm_hsusb.h>
#else
#include <linux/usb/msm_hsusb.h>
#endif
#include <linux/usb/android.h>
#include <mach/usbdiag.h>
#include <mach/socinfo.h>
#include <mach/rpm.h>
#include <mach/gpiomux.h>
#include <mach/msm_bus_board.h>
#include <mach/msm_memtypes.h>
#include <mach/dma.h>
#include <mach/msm_dsps.h>
#include <mach/msm_xo.h>
#include <mach/restart.h>
#ifdef CONFIG_WCD9310_CODEC
#include <linux/mfd/wcd9xxx/core.h>
#include <linux/mfd/wcd9xxx/pdata.h>
#endif
#include <linux/smsc3503.h>
#include <linux/msm_ion.h>
#include <mach/ion.h>
#include <mach/mdm2.h>
#include <mach/mdm-peripheral.h>
#include <mach/msm_rtb.h>
#include <mach/msm_cache_dump.h>
#include <mach/scm.h>
#include <mach/iommu_domains.h>
#include <mach/kgsl.h>
#include <linux/fmem.h>
#include "timer.h"
#include "devices.h"
#include "devices-msm8x60.h"
#include "spm.h"
#include "board-8960.h"
#include "pm.h"
#include <mach/cpuidle.h>
#include "rpm_resources.h"
#include <mach/mpm.h>
#include "clock.h"
#include "smd_private.h"
#include "pm-boot.h"
#include "msm_watchdog.h"
#include "platsmp.h"
#if defined(CONFIG_BT) && defined(CONFIG_BT_HCIUART_ATH3K)
#include <linux/wlan_plat.h>
#include <linux/mutex.h>
#endif
static struct platform_device msm_fm_platform_init = {
.name = "iris_fm",
.id = -1,
};
#define KS8851_RST_GPIO 89
#define KS8851_IRQ_GPIO 90
#define MHL_GPIO_INT 4
#define MHL_GPIO_RESET 15
#if defined(CONFIG_GPIO_SX150X) || defined(CONFIG_GPIO_SX150X_MODULE)
struct sx150x_platform_data msm8960_sx150x_data[] = {
[SX150X_CAM] = {
.gpio_base = GPIO_CAM_EXPANDER_BASE,
.oscio_is_gpo = false,
.io_pullup_ena = 0x0,
.io_pulldn_ena = 0xc0,
.io_open_drain_ena = 0x0,
.irq_summary = -1,
},
[SX150X_LIQUID] = {
.gpio_base = GPIO_LIQUID_EXPANDER_BASE,
.oscio_is_gpo = false,
.io_pullup_ena = 0x0c08,
.io_pulldn_ena = 0x4060,
.io_open_drain_ena = 0x000c,
.io_polarity = 0,
.irq_summary = -1,
},
};
#endif
#define MSM_PMEM_ADSP_SIZE 0x7800000
#define MSM_PMEM_AUDIO_SIZE 0x4CF000
#define MSM_PMEM_SIZE 0x2800000 /* 40 Mbytes */
#define MSM_LIQUID_PMEM_SIZE 0x4000000 /* 64 Mbytes */
#define MSM_HDMI_PRIM_PMEM_SIZE 0x4000000 /* 64 Mbytes */
#ifdef CONFIG_MSM_MULTIMEDIA_USE_ION
#define HOLE_SIZE 0x20000
#define MSM_ION_MFC_META_SIZE 0x40000 /* 256 Kbytes */
#define MSM_CONTIG_MEM_SIZE 0x65000
#ifdef CONFIG_MSM_IOMMU
#define MSM_ION_MM_SIZE 0x3800000 /* Need to be multiple of 64K */
#define MSM_ION_SF_SIZE 0x0
#define MSM_ION_QSECOM_SIZE 0x780000 /* (7.5MB) */
#define MSM_ION_HEAP_NUM 7
#else
#define MSM_ION_MM_SIZE MSM_PMEM_ADSP_SIZE
#define MSM_ION_SF_SIZE MSM_PMEM_SIZE
#define MSM_ION_QSECOM_SIZE 0x600000 /* (6MB) */
#define MSM_ION_HEAP_NUM 8
#endif
#define MSM_ION_MM_FW_SIZE (0x200000 - HOLE_SIZE) /* 128kb */
#define MSM_ION_MFC_SIZE (SZ_8K + MSM_ION_MFC_META_SIZE)
#define MSM_ION_AUDIO_SIZE MSM_PMEM_AUDIO_SIZE
#define MSM_LIQUID_ION_MM_SIZE (MSM_ION_MM_SIZE + 0x600000)
#define MSM_LIQUID_ION_SF_SIZE MSM_LIQUID_PMEM_SIZE
#define MSM_HDMI_PRIM_ION_SF_SIZE MSM_HDMI_PRIM_PMEM_SIZE
#define MSM_MM_FW_SIZE (0x200000 - HOLE_SIZE) /* 2mb -128kb*/
#define MSM8960_FIXED_AREA_START (0xa0000000 - (MSM_ION_MM_FW_SIZE + \
HOLE_SIZE))
#define MAX_FIXED_AREA_SIZE 0x10000000
#define MSM8960_FW_START MSM8960_FIXED_AREA_START
static unsigned msm_ion_sf_size = MSM_ION_SF_SIZE;
#else
#define MSM_CONTIG_MEM_SIZE 0x110C000
#define MSM_ION_HEAP_NUM 1
#endif
#ifdef CONFIG_KERNEL_MSM_CONTIG_MEM_REGION
static unsigned msm_contig_mem_size = MSM_CONTIG_MEM_SIZE;
static int __init msm_contig_mem_size_setup(char *p)
{
msm_contig_mem_size = memparse(p, NULL);
return 0;
}
early_param("msm_contig_mem_size", msm_contig_mem_size_setup);
#endif
#ifdef CONFIG_ANDROID_PMEM
static unsigned pmem_size = MSM_PMEM_SIZE;
static unsigned pmem_param_set;
static int __init pmem_size_setup(char *p)
{
pmem_size = memparse(p, NULL);
pmem_param_set = 1;
return 0;
}
early_param("pmem_size", pmem_size_setup);
static unsigned pmem_adsp_size = MSM_PMEM_ADSP_SIZE;
static int __init pmem_adsp_size_setup(char *p)
{
pmem_adsp_size = memparse(p, NULL);
return 0;
}
early_param("pmem_adsp_size", pmem_adsp_size_setup);
static unsigned pmem_audio_size = MSM_PMEM_AUDIO_SIZE;
static int __init pmem_audio_size_setup(char *p)
{
pmem_audio_size = memparse(p, NULL);
return 0;
}
early_param("pmem_audio_size", pmem_audio_size_setup);
#endif
#ifdef CONFIG_ANDROID_PMEM
#ifndef CONFIG_MSM_MULTIMEDIA_USE_ION
static struct android_pmem_platform_data android_pmem_pdata = {
.name = "pmem",
.allocator_type = PMEM_ALLOCATORTYPE_ALLORNOTHING,
.cached = 1,
.memory_type = MEMTYPE_EBI1,
};
static struct platform_device msm8960_android_pmem_device = {
.name = "android_pmem",
.id = 0,
.dev = {.platform_data = &android_pmem_pdata},
};
static struct android_pmem_platform_data android_pmem_adsp_pdata = {
.name = "pmem_adsp",
.allocator_type = PMEM_ALLOCATORTYPE_BITMAP,
.cached = 0,
.memory_type = MEMTYPE_EBI1,
};
static struct platform_device msm8960_android_pmem_adsp_device = {
.name = "android_pmem",
.id = 2,
.dev = { .platform_data = &android_pmem_adsp_pdata },
};
static struct android_pmem_platform_data android_pmem_audio_pdata = {
.name = "pmem_audio",
.allocator_type = PMEM_ALLOCATORTYPE_BITMAP,
.cached = 0,
.memory_type = MEMTYPE_EBI1,
};
static struct platform_device msm8960_android_pmem_audio_device = {
.name = "android_pmem",
.id = 4,
.dev = { .platform_data = &android_pmem_audio_pdata },
};
#endif /*CONFIG_MSM_MULTIMEDIA_USE_ION*/
#endif /*CONFIG_ANDROID_PMEM*/
struct fmem_platform_data msm8960_fmem_pdata = {
};
#define DSP_RAM_BASE_8960 0x8da00000
#define DSP_RAM_SIZE_8960 0x1800000
static int dspcrashd_pdata_8960 = 0xDEADDEAD;
static struct resource resources_dspcrashd_8960[] = {
{
.name = "msm_dspcrashd",
.start = DSP_RAM_BASE_8960,
.end = DSP_RAM_BASE_8960 + DSP_RAM_SIZE_8960,
.flags = IORESOURCE_DMA,
},
};
static struct platform_device msm_device_dspcrashd_8960 = {
.name = "msm_dspcrashd",
.num_resources = ARRAY_SIZE(resources_dspcrashd_8960),
.resource = resources_dspcrashd_8960,
.dev = { .platform_data = &dspcrashd_pdata_8960 },
};
static struct memtype_reserve msm8960_reserve_table[] __initdata = {
[MEMTYPE_SMI] = {
},
[MEMTYPE_EBI0] = {
.flags = MEMTYPE_FLAGS_1M_ALIGN,
},
[MEMTYPE_EBI1] = {
.flags = MEMTYPE_FLAGS_1M_ALIGN,
},
};
static void __init reserve_rtb_memory(void)
{
#if defined(CONFIG_MSM_RTB)
msm8960_reserve_table[MEMTYPE_EBI1].size += msm8960_rtb_pdata.size;
#endif
}
static void __init size_pmem_devices(void)
{
#ifdef CONFIG_ANDROID_PMEM
#ifndef CONFIG_MSM_MULTIMEDIA_USE_ION
android_pmem_adsp_pdata.size = pmem_adsp_size;
if (!pmem_param_set) {
if (machine_is_msm8960_liquid())
pmem_size = MSM_LIQUID_PMEM_SIZE;
if (msm8960_hdmi_as_primary_selected())
pmem_size = MSM_HDMI_PRIM_PMEM_SIZE;
}
android_pmem_pdata.size = pmem_size;
android_pmem_audio_pdata.size = MSM_PMEM_AUDIO_SIZE;
#endif /*CONFIG_MSM_MULTIMEDIA_USE_ION*/
#endif /*CONFIG_ANDROID_PMEM*/
}
#ifdef CONFIG_ANDROID_PMEM
#ifndef CONFIG_MSM_MULTIMEDIA_USE_ION
static void __init reserve_memory_for(struct android_pmem_platform_data *p)
{
msm8960_reserve_table[p->memory_type].size += p->size;
}
#endif /*CONFIG_MSM_MULTIMEDIA_USE_ION*/
#endif /*CONFIG_ANDROID_PMEM*/
static void __init reserve_pmem_memory(void)
{
#ifdef CONFIG_ANDROID_PMEM
#ifndef CONFIG_MSM_MULTIMEDIA_USE_ION
reserve_memory_for(&android_pmem_adsp_pdata);
reserve_memory_for(&android_pmem_pdata);
reserve_memory_for(&android_pmem_audio_pdata);
#endif
msm8960_reserve_table[MEMTYPE_EBI1].size += msm_contig_mem_size;
#endif
}
static int msm8960_paddr_to_memtype(unsigned int paddr)
{
return MEMTYPE_EBI1;
}
#define FMEM_ENABLED 0
#ifdef CONFIG_ION_MSM
#ifdef CONFIG_MSM_MULTIMEDIA_USE_ION
static struct ion_cp_heap_pdata cp_mm_msm8960_ion_pdata = {
.permission_type = IPT_TYPE_MM_CARVEOUT,
.align = SZ_64K,
.reusable = FMEM_ENABLED,
.mem_is_fmem = FMEM_ENABLED,
.fixed_position = FIXED_MIDDLE,
.iommu_map_all = 1,
.iommu_2x_map_domain = VIDEO_DOMAIN,
};
static struct ion_cp_heap_pdata cp_mfc_msm8960_ion_pdata = {
.permission_type = IPT_TYPE_MFC_SHAREDMEM,
.align = PAGE_SIZE,
.reusable = 0,
.mem_is_fmem = FMEM_ENABLED,
.fixed_position = FIXED_HIGH,
};
static struct ion_co_heap_pdata co_msm8960_ion_pdata = {
.adjacent_mem_id = INVALID_HEAP_ID,
.align = PAGE_SIZE,
.mem_is_fmem = 0,
};
static struct ion_co_heap_pdata fw_co_msm8960_ion_pdata = {
.adjacent_mem_id = ION_CP_MM_HEAP_ID,
.align = SZ_128K,
.mem_is_fmem = FMEM_ENABLED,
.fixed_position = FIXED_LOW,
};
#endif
static u64 msm_dmamask = DMA_BIT_MASK(32);
static struct platform_device ion_mm_heap_device = {
.name = "ion-mm-heap-device",
.id = -1,
.dev = {
.dma_mask = &msm_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
}
};
/**
* These heaps are listed in the order they will be allocated. Due to
* video hardware restrictions and content protection the FW heap has to
* be allocated adjacent (below) the MM heap and the MFC heap has to be
* allocated after the MM heap to ensure MFC heap is not more than 256MB
* away from the base address of the FW heap.
* However, the order of FW heap and MM heap doesn't matter since these
* two heaps are taken care of by separate code to ensure they are adjacent
* to each other.
* Don't swap the order unless you know what you are doing!
*/
struct ion_platform_heap msm8960_heaps[] = {
{
.id = ION_SYSTEM_HEAP_ID,
.type = ION_HEAP_TYPE_SYSTEM,
.name = ION_VMALLOC_HEAP_NAME,
},
#ifdef CONFIG_MSM_MULTIMEDIA_USE_ION
{
.id = ION_CP_MM_HEAP_ID,
.type = ION_HEAP_TYPE_CP,
.name = ION_MM_HEAP_NAME,
.size = MSM_ION_MM_SIZE,
.memory_type = ION_EBI_TYPE,
.extra_data = (void *) &cp_mm_msm8960_ion_pdata,
.priv = &ion_mm_heap_device.dev,
},
{
.id = ION_MM_FIRMWARE_HEAP_ID,
.type = ION_HEAP_TYPE_CARVEOUT,
.name = ION_MM_FIRMWARE_HEAP_NAME,
.size = MSM_ION_MM_FW_SIZE,
.memory_type = ION_EBI_TYPE,
.extra_data = (void *) &fw_co_msm8960_ion_pdata,
},
{
.id = ION_CP_MFC_HEAP_ID,
.type = ION_HEAP_TYPE_CP,
.name = ION_MFC_HEAP_NAME,
.size = MSM_ION_MFC_SIZE,
.memory_type = ION_EBI_TYPE,
.extra_data = (void *) &cp_mfc_msm8960_ion_pdata,
},
#ifndef CONFIG_MSM_IOMMU
{
.id = ION_SF_HEAP_ID,
.type = ION_HEAP_TYPE_CARVEOUT,
.name = ION_SF_HEAP_NAME,
.size = MSM_ION_SF_SIZE,
.memory_type = ION_EBI_TYPE,
.extra_data = (void *) &co_msm8960_ion_pdata,
},
#endif
{
.id = ION_IOMMU_HEAP_ID,
.type = ION_HEAP_TYPE_IOMMU,
.name = ION_IOMMU_HEAP_NAME,
},
{
.id = ION_QSECOM_HEAP_ID,
.type = ION_HEAP_TYPE_CARVEOUT,
.name = ION_QSECOM_HEAP_NAME,
.size = MSM_ION_QSECOM_SIZE,
.memory_type = ION_EBI_TYPE,
.extra_data = (void *) &co_msm8960_ion_pdata,
},
{
.id = ION_AUDIO_HEAP_ID,
.type = ION_HEAP_TYPE_CARVEOUT,
.name = ION_AUDIO_HEAP_NAME,
.size = MSM_ION_AUDIO_SIZE,
.memory_type = ION_EBI_TYPE,
.extra_data = (void *) &co_msm8960_ion_pdata,
},
#endif
};
static struct ion_platform_data msm8960_ion_pdata = {
.nr = MSM_ION_HEAP_NUM,
.heaps = msm8960_heaps,
};
static struct platform_device msm8960_ion_dev = {
.name = "ion-msm",
.id = 1,
.dev = { .platform_data = &msm8960_ion_pdata },
};
#endif
struct platform_device msm8960_fmem_device = {
.name = "fmem",
.id = 1,
.dev = { .platform_data = &msm8960_fmem_pdata },
};
static void __init adjust_mem_for_liquid(void)
{
unsigned int i;
if (!pmem_param_set) {
if (machine_is_msm8960_liquid())
msm_ion_sf_size = MSM_LIQUID_ION_SF_SIZE;
if (msm8960_hdmi_as_primary_selected())
msm_ion_sf_size = MSM_HDMI_PRIM_ION_SF_SIZE;
if (machine_is_msm8960_liquid() ||
msm8960_hdmi_as_primary_selected()) {
for (i = 0; i < msm8960_ion_pdata.nr; i++) {
if (msm8960_ion_pdata.heaps[i].id ==
ION_SF_HEAP_ID) {
msm8960_ion_pdata.heaps[i].size =
msm_ion_sf_size;
pr_debug("msm_ion_sf_size 0x%x\n",
msm_ion_sf_size);
break;
}
}
}
}
}
static void __init reserve_mem_for_ion(enum ion_memory_types mem_type,
unsigned long size)
{
msm8960_reserve_table[mem_type].size += size;
}
static void __init msm8960_reserve_fixed_area(unsigned long fixed_area_size)
{
#if defined(CONFIG_ION_MSM) && defined(CONFIG_MSM_MULTIMEDIA_USE_ION)
int ret;
if (fixed_area_size > MAX_FIXED_AREA_SIZE)
panic("fixed area size is larger than %dM\n",
MAX_FIXED_AREA_SIZE >> 20);
reserve_info->fixed_area_size = fixed_area_size;
reserve_info->fixed_area_start = MSM8960_FW_START;
ret = memblock_remove(reserve_info->fixed_area_start,
reserve_info->fixed_area_size);
BUG_ON(ret);
#endif
}
/**
* Reserve memory for ION and calculate amount of reusable memory for fmem.
* We only reserve memory for heaps that are not reusable. However, we only
* support one reusable heap at the moment so we ignore the reusable flag for
* other than the first heap with reusable flag set. Also handle special case
* for video heaps (MM,FW, and MFC). Video requires heaps MM and MFC to be
* at a higher address than FW in addition to not more than 256MB away from the
* base address of the firmware. This means that if MM is reusable the other
* two heaps must be allocated in the same region as FW. This is handled by the
* mem_is_fmem flag in the platform data. In addition the MM heap must be
* adjacent to the FW heap for content protection purposes.
*/
static void __init reserve_ion_memory(void)
{
#if defined(CONFIG_ION_MSM) && defined(CONFIG_MSM_MULTIMEDIA_USE_ION)
unsigned int i;
int ret;
unsigned int fixed_size = 0;
unsigned int fixed_low_size, fixed_middle_size, fixed_high_size;
unsigned long fixed_low_start, fixed_middle_start, fixed_high_start;
unsigned long cma_alignment;
unsigned int low_use_cma = 0;
unsigned int middle_use_cma = 0;
unsigned int high_use_cma = 0;
adjust_mem_for_liquid();
fixed_low_size = 0;
fixed_middle_size = 0;
fixed_high_size = 0;
cma_alignment = PAGE_SIZE << max(MAX_ORDER, pageblock_order);
for (i = 0; i < msm8960_ion_pdata.nr; ++i) {
struct ion_platform_heap *heap =
&(msm8960_ion_pdata.heaps[i]);
int align = SZ_4K;
int iommu_map_all = 0;
int adjacent_mem_id = INVALID_HEAP_ID;
int use_cma = 0;
if (heap->extra_data) {
int fixed_position = NOT_FIXED;
switch ((int) heap->type) {
case ION_HEAP_TYPE_CP:
fixed_position = ((struct ion_cp_heap_pdata *)
heap->extra_data)->fixed_position;
align = ((struct ion_cp_heap_pdata *)
heap->extra_data)->align;
iommu_map_all =
((struct ion_cp_heap_pdata *)
heap->extra_data)->iommu_map_all;
if (((struct ion_cp_heap_pdata *)
heap->extra_data)->is_cma) {
heap->size = ALIGN(heap->size,
cma_alignment);
use_cma = 1;
}
break;
case ION_HEAP_TYPE_DMA:
use_cma = 1;
/* Purposely fall through here */
case ION_HEAP_TYPE_CARVEOUT:
fixed_position = ((struct ion_co_heap_pdata *)
heap->extra_data)->fixed_position;
adjacent_mem_id = ((struct ion_co_heap_pdata *)
heap->extra_data)->adjacent_mem_id;
break;
default:
break;
}
if (iommu_map_all) {
if (heap->size & (SZ_64K-1)) {
heap->size = ALIGN(heap->size, SZ_64K);
pr_info("Heap %s not aligned to 64K. Adjusting size to %x\n",
heap->name, heap->size);
}
}
if (fixed_position != NOT_FIXED)
fixed_size += heap->size;
else
reserve_mem_for_ion(MEMTYPE_EBI1, heap->size);
if (fixed_position == FIXED_LOW) {
fixed_low_size += heap->size;
low_use_cma = use_cma;
} else if (fixed_position == FIXED_MIDDLE) {
fixed_middle_size += heap->size;
middle_use_cma = use_cma;
} else if (fixed_position == FIXED_HIGH) {
fixed_high_size += heap->size;
high_use_cma = use_cma;
} else if (use_cma) {
/*
* Heaps that use CMA but are not part of the
* fixed set. Create wherever.
*/
dma_declare_contiguous(
heap->priv,
heap->size,
0,
0xb0000000);
}
}
}
if (!fixed_size)
return;
/*
* Given the setup for the fixed area, we can't round up all sizes.
* Some sizes must be set up exactly and aligned correctly. Incorrect
* alignments are considered a configuration issue
*/
fixed_low_start = MSM8960_FIXED_AREA_START;
if (low_use_cma) {
BUG_ON(!IS_ALIGNED(fixed_low_start, cma_alignment));
BUG_ON(!IS_ALIGNED(fixed_low_size + HOLE_SIZE, cma_alignment));
} else {
BUG_ON(!IS_ALIGNED(fixed_low_size + HOLE_SIZE, SECTION_SIZE));
ret = memblock_remove(fixed_low_start,
fixed_low_size + HOLE_SIZE);
BUG_ON(ret);
}
fixed_middle_start = fixed_low_start + fixed_low_size + HOLE_SIZE;
if (middle_use_cma) {
BUG_ON(!IS_ALIGNED(fixed_middle_start, cma_alignment));
BUG_ON(!IS_ALIGNED(fixed_middle_size, cma_alignment));
} else {
BUG_ON(!IS_ALIGNED(fixed_middle_size, SECTION_SIZE));
ret = memblock_remove(fixed_middle_start, fixed_middle_size);
BUG_ON(ret);
}
fixed_high_start = fixed_middle_start + fixed_middle_size;
if (high_use_cma) {
fixed_high_size = ALIGN(fixed_high_size, cma_alignment);
BUG_ON(!IS_ALIGNED(fixed_high_start, cma_alignment));
} else {
/* This is the end of the fixed area so it's okay to round up */
fixed_high_size = ALIGN(fixed_high_size, SECTION_SIZE);
ret = memblock_remove(fixed_high_start, fixed_high_size);
BUG_ON(ret);
}
for (i = 0; i < msm8960_ion_pdata.nr; ++i) {
struct ion_platform_heap *heap = &(msm8960_ion_pdata.heaps[i]);
if (heap->extra_data) {
int fixed_position = NOT_FIXED;
struct ion_cp_heap_pdata *pdata = NULL;
switch ((int) heap->type) {
case ION_HEAP_TYPE_CP:
pdata =
(struct ion_cp_heap_pdata *)heap->extra_data;
fixed_position = pdata->fixed_position;
break;
case ION_HEAP_TYPE_CARVEOUT:
case ION_HEAP_TYPE_DMA:
fixed_position = ((struct ion_co_heap_pdata *)
heap->extra_data)->fixed_position;
break;
default:
break;
}
switch (fixed_position) {
case FIXED_LOW:
heap->base = fixed_low_start;
break;
case FIXED_MIDDLE:
heap->base = fixed_middle_start;
if (middle_use_cma) {
ret = dma_declare_contiguous(
&ion_mm_heap_device.dev,
heap->size,
fixed_middle_start,
0xa0000000);
WARN_ON(ret);
}
pdata->secure_base = fixed_middle_start
- HOLE_SIZE;
pdata->secure_size = HOLE_SIZE + heap->size;
break;
case FIXED_HIGH:
heap->base = fixed_high_start;
break;
default:
break;
}
}
}
#endif
}
static void ion_adjust_secure_allocation(void)
{
int i;
for (i = 0; i < msm8960_ion_pdata.nr; i++) {
struct ion_platform_heap *heap =
&(msm8960_ion_pdata.heaps[i]);
if (heap->extra_data) {
switch ((int) heap->type) {
case ION_HEAP_TYPE_CP:
if (cpu_is_msm8960()) {
((struct ion_cp_heap_pdata *)
heap->extra_data)->allow_nonsecure_alloc
= 1;
}
}
}
}
}
static void __init reserve_mdp_memory(void)
{
msm8960_mdp_writeback(msm8960_reserve_table);
}
static void __init reserve_cache_dump_memory(void)
{
#ifdef CONFIG_MSM_CACHE_DUMP
unsigned int total;
total = msm8960_cache_dump_pdata.l1_size +
msm8960_cache_dump_pdata.l2_size;
msm8960_reserve_table[MEMTYPE_EBI1].size += total;
#endif
}
static void __init msm8960_calculate_reserve_sizes(void)
{
size_pmem_devices();
reserve_pmem_memory();
reserve_ion_memory();
reserve_mdp_memory();
reserve_rtb_memory();
reserve_cache_dump_memory();
}
static struct reserve_info msm8960_reserve_info __initdata = {
.memtype_reserve_table = msm8960_reserve_table,
.calculate_reserve_sizes = msm8960_calculate_reserve_sizes,
.reserve_fixed_area = msm8960_reserve_fixed_area,
.paddr_to_memtype = msm8960_paddr_to_memtype,
};
static int msm8960_memory_bank_size(void)
{
return 1<<29;
}
static void __init locate_unstable_memory(void)
{
struct membank *mb = &meminfo.bank[meminfo.nr_banks - 1];
unsigned long bank_size;
unsigned long low, high;
bank_size = msm8960_memory_bank_size();
msm8960_reserve_info.bank_size = bank_size;
low = meminfo.bank[0].start;
high = mb->start + mb->size;
/* Check if 32 bit overflow occured */
if (high < mb->start)
high = ~0UL;
if (high < MAX_FIXED_AREA_SIZE + MSM8960_FIXED_AREA_START)
panic("fixed area extends beyond end of memory\n");
low &= ~(bank_size - 1);
if (high - low <= bank_size)
goto no_dmm;
#ifdef CONFIG_ENABLE_DMM
msm8960_reserve_info.low_unstable_address = mb->start -
MIN_MEMORY_BLOCK_SIZE + mb->size;
msm8960_reserve_info.max_unstable_size = MIN_MEMORY_BLOCK_SIZE;
pr_info("low unstable address %lx max size %lx bank size %lx\n",
msm8960_reserve_info.low_unstable_address,
msm8960_reserve_info.max_unstable_size,
msm8960_reserve_info.bank_size);
return;
#endif
no_dmm:
msm8960_reserve_info.low_unstable_address = high;
msm8960_reserve_info.max_unstable_size = 0;
}
static void __init place_movable_zone(void)
{
#ifdef CONFIG_ENABLE_DMM
movable_reserved_start = msm8960_reserve_info.low_unstable_address;
movable_reserved_size = msm8960_reserve_info.max_unstable_size;
pr_info("movable zone start %lx size %lx\n",
movable_reserved_start, movable_reserved_size);
#endif
}
static void __init msm8960_early_memory(void)
{
reserve_info = &msm8960_reserve_info;
locate_unstable_memory();
place_movable_zone();
}
static char prim_panel_name[PANEL_NAME_MAX_LEN];
static char ext_panel_name[PANEL_NAME_MAX_LEN];
static int __init prim_display_setup(char *param)
{
if (strnlen(param, PANEL_NAME_MAX_LEN))
strlcpy(prim_panel_name, param, PANEL_NAME_MAX_LEN);
return 0;
}
early_param("prim_display", prim_display_setup);
static int __init ext_display_setup(char *param)
{
if (strnlen(param, PANEL_NAME_MAX_LEN))
strlcpy(ext_panel_name, param, PANEL_NAME_MAX_LEN);
return 0;
}
early_param("ext_display", ext_display_setup);
static void __init msm8960_reserve(void)
{
msm8960_set_display_params(prim_panel_name, ext_panel_name);
msm_reserve();
}
static int msm8960_change_memory_power(u64 start, u64 size,
int change_type)
{
return soc_change_memory_power(start, size, change_type);
}
static void __init msm8960_allocate_memory_regions(void)
{
msm8960_allocate_fb_region();
}
#ifdef CONFIG_WCD9310_CODEC
#define TABLA_INTERRUPT_BASE (NR_MSM_IRQS + NR_GPIO_IRQS + NR_PM8921_IRQS)
/* Micbias setting is based on 8660 CDP/MTP/FLUID requirement
* 4 micbiases are used to power various analog and digital
* microphones operating at 1800 mV. Technically, all micbiases
* can source from single cfilter since all microphones operate
* at the same voltage level. The arrangement below is to make
* sure all cfilters are exercised. LDO_H regulator ouput level
* does not need to be as high as 2.85V. It is choosen for
* microphone sensitivity purpose.
*/
static struct wcd9xxx_pdata tabla_platform_data = {
.slimbus_slave_device = {
.name = "tabla-slave",
.e_addr = {0, 0, 0x10, 0, 0x17, 2},
},
.irq = MSM_GPIO_TO_INT(62),
.irq_base = TABLA_INTERRUPT_BASE,
.num_irqs = NR_WCD9XXX_IRQS,
.reset_gpio = PM8921_GPIO_PM_TO_SYS(34),
.micbias = {
.ldoh_v = TABLA_LDOH_2P85_V,
.cfilt1_mv = 1800,
.cfilt2_mv = 2700,
.cfilt3_mv = 1800,
.bias1_cfilt_sel = TABLA_CFILT1_SEL,
.bias2_cfilt_sel = TABLA_CFILT2_SEL,
.bias3_cfilt_sel = TABLA_CFILT3_SEL,
.bias4_cfilt_sel = TABLA_CFILT3_SEL,
},
.regulator = {
{
.name = "CDC_VDD_CP",
.min_uV = 1800000,
.max_uV = 1800000,
.optimum_uA = WCD9XXX_CDC_VDDA_CP_CUR_MAX,
},
{
.name = "CDC_VDDA_RX",
.min_uV = 1800000,
.max_uV = 1800000,
.optimum_uA = WCD9XXX_CDC_VDDA_RX_CUR_MAX,
},
{
.name = "CDC_VDDA_TX",
.min_uV = 1800000,
.max_uV = 1800000,
.optimum_uA = WCD9XXX_CDC_VDDA_TX_CUR_MAX,
},
{
.name = "VDDIO_CDC",
.min_uV = 1800000,
.max_uV = 1800000,
.optimum_uA = WCD9XXX_VDDIO_CDC_CUR_MAX,
},
{
.name = "VDDD_CDC_D",
.min_uV = 1225000,
.max_uV = 1250000,
.optimum_uA = WCD9XXX_VDDD_CDC_D_CUR_MAX,
},
{
.name = "CDC_VDDA_A_1P2V",
.min_uV = 1225000,
.max_uV = 1250000,
.optimum_uA = WCD9XXX_VDDD_CDC_A_CUR_MAX,
},
},
};
static struct slim_device msm_slim_tabla = {
.name = "tabla-slim",
.e_addr = {0, 1, 0x10, 0, 0x17, 2},
.dev = {
.platform_data = &tabla_platform_data,
},
};
static struct wcd9xxx_pdata tabla20_platform_data = {
.slimbus_slave_device = {
.name = "tabla-slave",
.e_addr = {0, 0, 0x60, 0, 0x17, 2},
},
.irq = MSM_GPIO_TO_INT(62),
.irq_base = TABLA_INTERRUPT_BASE,
.num_irqs = NR_WCD9XXX_IRQS,
.reset_gpio = PM8921_GPIO_PM_TO_SYS(34),
.micbias = {
.ldoh_v = TABLA_LDOH_2P85_V,
.cfilt1_mv = 1800,
.cfilt2_mv = 2700,
.cfilt3_mv = 1800,
.bias1_cfilt_sel = TABLA_CFILT1_SEL,
.bias2_cfilt_sel = TABLA_CFILT2_SEL,
.bias3_cfilt_sel = TABLA_CFILT3_SEL,
.bias4_cfilt_sel = TABLA_CFILT3_SEL,
},
.regulator = {
{
.name = "CDC_VDD_CP",
.min_uV = 1800000,
.max_uV = 1800000,
.optimum_uA = WCD9XXX_CDC_VDDA_CP_CUR_MAX,
},
{
.name = "CDC_VDDA_RX",
.min_uV = 1800000,
.max_uV = 1800000,
.optimum_uA = WCD9XXX_CDC_VDDA_RX_CUR_MAX,
},
{
.name = "CDC_VDDA_TX",
.min_uV = 1800000,
.max_uV = 1800000,
.optimum_uA = WCD9XXX_CDC_VDDA_TX_CUR_MAX,
},
{
.name = "VDDIO_CDC",
.min_uV = 1800000,
.max_uV = 1800000,
.optimum_uA = WCD9XXX_VDDIO_CDC_CUR_MAX,
},
{
.name = "VDDD_CDC_D",
.min_uV = 1225000,
.max_uV = 1250000,
.optimum_uA = WCD9XXX_VDDD_CDC_D_CUR_MAX,
},
{
.name = "CDC_VDDA_A_1P2V",
.min_uV = 1225000,
.max_uV = 1250000,
.optimum_uA = WCD9XXX_VDDD_CDC_A_CUR_MAX,
},
},
};
static struct slim_device msm_slim_tabla20 = {
.name = "tabla2x-slim",
.e_addr = {0, 1, 0x60, 0, 0x17, 2},
.dev = {
.platform_data = &tabla20_platform_data,
},
};
#endif
static struct slim_boardinfo msm_slim_devices[] = {
#ifdef CONFIG_WCD9310_CODEC
{
.bus_num = 1,
.slim_slave = &msm_slim_tabla,
},
{
.bus_num = 1,
.slim_slave = &msm_slim_tabla20,
},
#endif
/* add more slimbus slaves as needed */
};
#define MSM_WCNSS_PHYS 0x03000000
#define MSM_WCNSS_SIZE 0x280000
static struct resource resources_wcnss_wlan[] = {
{
.start = RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ,
.end = RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ,
.name = "wcnss_wlanrx_irq",
.flags = IORESOURCE_IRQ,
},
{
.start = RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ,
.end = RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ,
.name = "wcnss_wlantx_irq",
.flags = IORESOURCE_IRQ,
},
{
.start = MSM_WCNSS_PHYS,
.end = MSM_WCNSS_PHYS + MSM_WCNSS_SIZE - 1,
.name = "wcnss_mmio",
.flags = IORESOURCE_MEM,
},
{
.start = 84,
.end = 88,
.name = "wcnss_gpios_5wire",
.flags = IORESOURCE_IO,
},
};
static struct qcom_wcnss_opts qcom_wcnss_pdata = {
.has_48mhz_xo = 1,
};
static struct platform_device msm_device_wcnss_wlan = {
.name = "wcnss_wlan",
.id = 0,
.num_resources = ARRAY_SIZE(resources_wcnss_wlan),
.resource = resources_wcnss_wlan,
.dev = {.platform_data = &qcom_wcnss_pdata},
};
#ifdef CONFIG_QSEECOM
/* qseecom bus scaling */
static struct msm_bus_vectors qseecom_clks_init_vectors[] = {
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_EBI_CH0,
.ib = 0,
.ab = 0,
},
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_SPS,
.ib = 0,
.ab = 0,
},
{
.src = MSM_BUS_MASTER_SPDM,
.dst = MSM_BUS_SLAVE_SPDM,
.ib = 0,
.ab = 0,
},
};
static struct msm_bus_vectors qseecom_enable_dfab_vectors[] = {
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_EBI_CH0,
.ib = (492 * 8) * 1000000UL,
.ab = (492 * 8) * 100000UL,
},
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_SPS,
.ib = (492 * 8) * 1000000UL,
.ab = (492 * 8) * 100000UL,
},
{
.src = MSM_BUS_MASTER_SPDM,
.dst = MSM_BUS_SLAVE_SPDM,
.ib = 0,
.ab = 0,
},
};
static struct msm_bus_vectors qseecom_enable_sfpb_vectors[] = {
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_EBI_CH0,
.ib = 0,
.ab = 0,
},
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_SPS,
.ib = 0,
.ab = 0,
},
{
.src = MSM_BUS_MASTER_SPDM,
.dst = MSM_BUS_SLAVE_SPDM,
.ib = (64 * 8) * 1000000UL,
.ab = (64 * 8) * 100000UL,
},
};
static struct msm_bus_vectors qseecom_enable_dfab_sfpb_vectors[] = {
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_EBI_CH0,
.ib = (492 * 8) * 1000000UL,
.ab = (492 * 8) * 100000UL,
},
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_SPS,
.ib = (492 * 8) * 1000000UL,
.ab = (492 * 8) * 100000UL,
},
{
.src = MSM_BUS_MASTER_SPDM,
.dst = MSM_BUS_SLAVE_SPDM,
.ib = (64 * 8) * 1000000UL,
.ab = (64 * 8) * 100000UL,
},
};
static struct msm_bus_paths qseecom_hw_bus_scale_usecases[] = {
{
ARRAY_SIZE(qseecom_clks_init_vectors),
qseecom_clks_init_vectors,
},
{
ARRAY_SIZE(qseecom_enable_dfab_vectors),
qseecom_enable_dfab_vectors,
},
{
ARRAY_SIZE(qseecom_enable_sfpb_vectors),
qseecom_enable_sfpb_vectors,
},
{
ARRAY_SIZE(qseecom_enable_dfab_sfpb_vectors),
qseecom_enable_dfab_sfpb_vectors,
},
};
static struct msm_bus_scale_pdata qseecom_bus_pdata = {
qseecom_hw_bus_scale_usecases,
ARRAY_SIZE(qseecom_hw_bus_scale_usecases),
.name = "qsee",
};
static struct platform_device qseecom_device = {
.name = "qseecom",
.id = 0,
.dev = {
.platform_data = &qseecom_bus_pdata,
},
};
#endif
#if defined(CONFIG_CRYPTO_DEV_QCRYPTO) || \
defined(CONFIG_CRYPTO_DEV_QCRYPTO_MODULE) || \
defined(CONFIG_CRYPTO_DEV_QCEDEV) || \
defined(CONFIG_CRYPTO_DEV_QCEDEV_MODULE)
#define QCE_SIZE 0x10000
#define QCE_0_BASE 0x18500000
#define QCE_HW_KEY_SUPPORT 0
#define QCE_SHA_HMAC_SUPPORT 1
#define QCE_SHARE_CE_RESOURCE 1
#define QCE_CE_SHARED 0
/* Begin Bus scaling definitions */
static struct msm_bus_vectors crypto_hw_init_vectors[] = {
{
.src = MSM_BUS_MASTER_ADM_PORT0,
.dst = MSM_BUS_SLAVE_EBI_CH0,
.ab = 0,
.ib = 0,
},
{
.src = MSM_BUS_MASTER_ADM_PORT1,
.dst = MSM_BUS_SLAVE_GSBI1_UART,
.ab = 0,
.ib = 0,
},
};
static struct msm_bus_vectors crypto_hw_active_vectors[] = {
{
.src = MSM_BUS_MASTER_ADM_PORT0,
.dst = MSM_BUS_SLAVE_EBI_CH0,
.ab = 70000000UL,
.ib = 70000000UL,
},
{
.src = MSM_BUS_MASTER_ADM_PORT1,
.dst = MSM_BUS_SLAVE_GSBI1_UART,
.ab = 2480000000UL,
.ib = 2480000000UL,
},
};
static struct msm_bus_paths crypto_hw_bus_scale_usecases[] = {
{
ARRAY_SIZE(crypto_hw_init_vectors),
crypto_hw_init_vectors,
},
{
ARRAY_SIZE(crypto_hw_active_vectors),
crypto_hw_active_vectors,
},
};
static struct msm_bus_scale_pdata crypto_hw_bus_scale_pdata = {
crypto_hw_bus_scale_usecases,
ARRAY_SIZE(crypto_hw_bus_scale_usecases),
.name = "cryptohw",
};
/* End Bus Scaling Definitions*/
static struct resource qcrypto_resources[] = {
[0] = {
.start = QCE_0_BASE,
.end = QCE_0_BASE + QCE_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "crypto_channels",
.start = DMOV_CE_IN_CHAN,
.end = DMOV_CE_OUT_CHAN,
.flags = IORESOURCE_DMA,
},
[2] = {
.name = "crypto_crci_in",
.start = DMOV_CE_IN_CRCI,
.end = DMOV_CE_IN_CRCI,
.flags = IORESOURCE_DMA,
},
[3] = {
.name = "crypto_crci_out",
.start = DMOV_CE_OUT_CRCI,
.end = DMOV_CE_OUT_CRCI,
.flags = IORESOURCE_DMA,
},
};
static struct resource qcedev_resources[] = {
[0] = {
.start = QCE_0_BASE,
.end = QCE_0_BASE + QCE_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "crypto_channels",
.start = DMOV_CE_IN_CHAN,
.end = DMOV_CE_OUT_CHAN,
.flags = IORESOURCE_DMA,
},
[2] = {
.name = "crypto_crci_in",
.start = DMOV_CE_IN_CRCI,
.end = DMOV_CE_IN_CRCI,
.flags = IORESOURCE_DMA,
},
[3] = {
.name = "crypto_crci_out",
.start = DMOV_CE_OUT_CRCI,
.end = DMOV_CE_OUT_CRCI,
.flags = IORESOURCE_DMA,
},
};
#endif
#if defined(CONFIG_CRYPTO_DEV_QCRYPTO) || \
defined(CONFIG_CRYPTO_DEV_QCRYPTO_MODULE)
static struct msm_ce_hw_support qcrypto_ce_hw_suppport = {
.ce_shared = QCE_CE_SHARED,
.shared_ce_resource = QCE_SHARE_CE_RESOURCE,
.hw_key_support = QCE_HW_KEY_SUPPORT,
.sha_hmac = QCE_SHA_HMAC_SUPPORT,
.bus_scale_table = &crypto_hw_bus_scale_pdata,
};
static struct platform_device qcrypto_device = {
.name = "qcrypto",
.id = 0,
.num_resources = ARRAY_SIZE(qcrypto_resources),
.resource = qcrypto_resources,
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &qcrypto_ce_hw_suppport,
},
};
#endif
#if defined(CONFIG_CRYPTO_DEV_QCEDEV) || \
defined(CONFIG_CRYPTO_DEV_QCEDEV_MODULE)
static struct msm_ce_hw_support qcedev_ce_hw_suppport = {
.ce_shared = QCE_CE_SHARED,
.shared_ce_resource = QCE_SHARE_CE_RESOURCE,
.hw_key_support = QCE_HW_KEY_SUPPORT,
.sha_hmac = QCE_SHA_HMAC_SUPPORT,
.bus_scale_table = &crypto_hw_bus_scale_pdata,
};
static struct platform_device qcedev_device = {
.name = "qce",
.id = 0,
.num_resources = ARRAY_SIZE(qcedev_resources),
.resource = qcedev_resources,
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &qcedev_ce_hw_suppport,
},
};
#endif
static struct mdm_platform_data sglte_platform_data = {
.mdm_version = "4.0",
.ramdump_delay_ms = 1000,
/* delay between two PS_HOLDs */
.ps_hold_delay_ms = 500,
.soft_reset_inverted = 1,
.peripheral_platform_device = NULL,
.ramdump_timeout_ms = 600000,
.no_powerdown_after_ramdumps = 1,
.image_upgrade_supported = 1,
};
#define MSM_TSIF0_PHYS (0x18200000)
#define MSM_TSIF1_PHYS (0x18201000)
#define MSM_TSIF_SIZE (0x200)
#define MSM_TSPP_PHYS (0x18202000)
#define MSM_TSPP_SIZE (0x1000)
#define MSM_TSPP_BAM_PHYS (0x18204000)
#define MSM_TSPP_BAM_SIZE (0x2000)
#define TSIF_0_CLK GPIO_CFG(75, 1, GPIO_CFG_INPUT, \
GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA)
#define TSIF_0_EN GPIO_CFG(76, 1, GPIO_CFG_INPUT, \
GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA)
#define TSIF_0_DATA GPIO_CFG(77, 1, GPIO_CFG_INPUT, \
GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA)
#define TSIF_0_SYNC GPIO_CFG(82, 1, GPIO_CFG_INPUT, \
GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA)
#define TSIF_1_CLK GPIO_CFG(79, 1, GPIO_CFG_INPUT, \
GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA)
#define TSIF_1_EN GPIO_CFG(80, 1, GPIO_CFG_INPUT, \
GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA)
#define TSIF_1_DATA GPIO_CFG(81, 1, GPIO_CFG_INPUT, \
GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA)
#define TSIF_1_SYNC GPIO_CFG(78, 1, GPIO_CFG_INPUT, \
GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA)
static const struct msm_gpio tsif_gpios[] = {
{ .gpio_cfg = TSIF_0_CLK, .label = "tsif0_clk", },
{ .gpio_cfg = TSIF_0_EN, .label = "tsif0_en", },
{ .gpio_cfg = TSIF_0_DATA, .label = "tsif0_data", },
{ .gpio_cfg = TSIF_0_SYNC, .label = "tsif0_sync", },
{ .gpio_cfg = TSIF_1_CLK, .label = "tsif1_clk", },
{ .gpio_cfg = TSIF_1_EN, .label = "tsif1_en", },
{ .gpio_cfg = TSIF_1_DATA, .label = "tsif1_data", },
{ .gpio_cfg = TSIF_1_SYNC, .label = "tsif1_sync", },
};
static struct resource tspp_resources[] = {
[0] = {
.name = "TSIF_TSPP_IRQ",
.flags = IORESOURCE_IRQ,
.start = TSIF_TSPP_IRQ,
.end = TSIF_TSPP_IRQ,
},
[1] = {
.name = "TSIF0_IRQ",
.flags = IORESOURCE_IRQ,
.start = TSIF1_IRQ,
.end = TSIF1_IRQ,
},
[2] = {
.name = "TSIF1_IRQ",
.flags = IORESOURCE_IRQ,
.start = TSIF2_IRQ,
.end = TSIF2_IRQ,
},
[3] = {
.name = "TSIF_BAM_IRQ",
.flags = IORESOURCE_IRQ,
.start = TSIF_BAM_IRQ,
.end = TSIF_BAM_IRQ,
},
[4] = {
.name = "MSM_TSIF0_PHYS",
.flags = IORESOURCE_MEM,
.start = MSM_TSIF0_PHYS,
.end = MSM_TSIF0_PHYS + MSM_TSIF_SIZE - 1,
},
[5] = {
.name = "MSM_TSIF1_PHYS",
.flags = IORESOURCE_MEM,
.start = MSM_TSIF1_PHYS,
.end = MSM_TSIF1_PHYS + MSM_TSIF_SIZE - 1,
},
[6] = {
.name = "MSM_TSPP_PHYS",
.flags = IORESOURCE_MEM,
.start = MSM_TSPP_PHYS,
.end = MSM_TSPP_PHYS + MSM_TSPP_SIZE - 1,
},
[7] = {
.name = "MSM_TSPP_BAM_PHYS",
.flags = IORESOURCE_MEM,
.start = MSM_TSPP_BAM_PHYS,
.end = MSM_TSPP_BAM_PHYS + MSM_TSPP_BAM_SIZE - 1,
},
};
static struct msm_tspp_platform_data tspp_platform_data = {
.num_gpios = ARRAY_SIZE(tsif_gpios),
.gpios = tsif_gpios,
.tsif_pclk = "tsif_pclk",
.tsif_ref_clk = "tsif_ref_clk",
};
static struct platform_device msm_device_tspp = {
.name = "msm_tspp",
.id = 0,
.num_resources = ARRAY_SIZE(tspp_resources),
.resource = tspp_resources,
.dev = {
.platform_data = &tspp_platform_data
},
};
#define MSM_SHARED_RAM_PHYS 0x80000000
static void __init msm8960_map_io(void)
{
msm_shared_ram_phys = MSM_SHARED_RAM_PHYS;
msm_map_msm8960_io();
if (socinfo_init() < 0)
pr_err("socinfo_init() failed!\n");
}
static void __init msm8960_init_irq(void)
{
struct msm_mpm_device_data *data = NULL;
#ifdef CONFIG_MSM_MPM
data = &msm8960_mpm_dev_data;
#endif
msm_mpm_irq_extn_init(data);
gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
(void *)MSM_QGIC_CPU_BASE);
}
static void __init msm8960_init_buses(void)
{
#ifdef CONFIG_MSM_BUS_SCALING
msm_bus_rpm_set_mt_mask();
msm_bus_8960_apps_fabric_pdata.rpm_enabled = 1;
msm_bus_8960_sys_fabric_pdata.rpm_enabled = 1;
msm_bus_apps_fabric.dev.platform_data =
&msm_bus_8960_apps_fabric_pdata;
msm_bus_sys_fabric.dev.platform_data = &msm_bus_8960_sys_fabric_pdata;
if (cpu_is_msm8960ab()) {
msm_bus_8960_sg_mm_fabric_pdata.rpm_enabled = 1;
msm_bus_mm_fabric.dev.platform_data =
&msm_bus_8960_sg_mm_fabric_pdata;
} else {
msm_bus_8960_mm_fabric_pdata.rpm_enabled = 1;
msm_bus_mm_fabric.dev.platform_data =
&msm_bus_8960_mm_fabric_pdata;
}
msm_bus_sys_fpb.dev.platform_data = &msm_bus_8960_sys_fpb_pdata;
msm_bus_cpss_fpb.dev.platform_data = &msm_bus_8960_cpss_fpb_pdata;
#endif
}
static struct msm_spi_platform_data msm8960_qup_spi_gsbi1_pdata = {
.max_clock_speed = 15060000,
.infinite_mode = 0xFFC0,
};
#ifdef CONFIG_USB_MSM_OTG_72K
static struct msm_otg_platform_data msm_otg_pdata;
#else
static int wr_phy_init_seq[] = {
0x44, 0x80, /* set VBUS valid threshold
and disconnect valid threshold */
0x68, 0x81, /* update DC voltage level */
0x14, 0x82, /* set preemphasis and rise/fall time */
0x13, 0x83, /* set source impedance adjusment */
-1};
static int liquid_v1_phy_init_seq[] = {
0x44, 0x80,/* set VBUS valid threshold
and disconnect valid threshold */
0x6C, 0x81,/* update DC voltage level */
0x18, 0x82,/* set preemphasis and rise/fall time */
0x23, 0x83,/* set source impedance sdjusment */
-1};
static int sglte_phy_init_seq[] = {
0x44, 0x80, /* set VBUS valid threshold
and disconnect valid threshold */
0x6A, 0x81, /* update DC voltage level */
0x24, 0x82, /* set preemphasis and rise/fall time */
0x13, 0x83, /* set source impedance adjusment */
-1};
#ifdef CONFIG_MSM_BUS_SCALING
/* Bandwidth requests (zero) if no vote placed */
static struct msm_bus_vectors usb_init_vectors[] = {
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_EBI_CH0,
.ab = 0,
.ib = 0,
},
};
/* Bus bandwidth requests in Bytes/sec */
static struct msm_bus_vectors usb_max_vectors[] = {
{
.src = MSM_BUS_MASTER_SPS,
.dst = MSM_BUS_SLAVE_EBI_CH0,
.ab = 60000000, /* At least 480Mbps on bus. */
.ib = 960000000, /* MAX bursts rate */
},
};
static struct msm_bus_paths usb_bus_scale_usecases[] = {
{
ARRAY_SIZE(usb_init_vectors),
usb_init_vectors,
},
{
ARRAY_SIZE(usb_max_vectors),
usb_max_vectors,
},
};
static struct msm_bus_scale_pdata usb_bus_scale_pdata = {
usb_bus_scale_usecases,
ARRAY_SIZE(usb_bus_scale_usecases),
.name = "usb",
};
#endif
#define MSM_MPM_PIN_USB1_OTGSESSVLD 40
static struct msm_otg_platform_data msm_otg_pdata = {
.mode = USB_OTG,
.otg_control = OTG_PMIC_CONTROL,
.phy_type = SNPS_28NM_INTEGRATED_PHY,
.pmic_id_irq = PM8921_USB_ID_IN_IRQ(PM8921_IRQ_BASE),
.power_budget = 750,
#ifdef CONFIG_MSM_BUS_SCALING
.bus_scale_table = &usb_bus_scale_pdata,
.mpm_otgsessvld_int = MSM_MPM_PIN_USB1_OTGSESSVLD,
#endif
#ifdef CONFIG_FB_MSM_HDMI_MHL_8334
.mhl_dev_name = "sii8334",
#endif
};
#endif
#ifdef CONFIG_USB_EHCI_MSM_HSIC
#define HSIC_HUB_RESET_GPIO 91
static struct msm_hsic_host_platform_data msm_hsic_pdata = {
.strobe = 150,
.data = 151,
};
static struct smsc_hub_platform_data hsic_hub_pdata = {
.hub_reset = HSIC_HUB_RESET_GPIO,
};
#else
static struct msm_hsic_host_platform_data msm_hsic_pdata;
static struct smsc_hub_platform_data hsic_hub_pdata;
#endif
static struct platform_device smsc_hub_device = {
.name = "msm_smsc_hub",
.id = -1,
.dev = {
.platform_data = &hsic_hub_pdata,
},
};
#define PID_MAGIC_ID 0x71432909
#define SERIAL_NUM_MAGIC_ID 0x61945374
#define SERIAL_NUMBER_LENGTH 127
#define DLOAD_USB_BASE_ADD 0x2A03F0C8
struct magic_num_struct {
uint32_t pid;
uint32_t serial_num;
};
struct dload_struct {
uint32_t reserved1;
uint32_t reserved2;
uint32_t reserved3;
uint16_t reserved4;
uint16_t pid;
char serial_number[SERIAL_NUMBER_LENGTH];
uint16_t reserved5;
struct magic_num_struct magic_struct;
};
static int usb_diag_update_pid_and_serial_num(uint32_t pid, const char *snum)
{
struct dload_struct __iomem *dload = 0;
dload = ioremap(DLOAD_USB_BASE_ADD, sizeof(*dload));
if (!dload) {
pr_err("%s: cannot remap I/O memory region: %08x\n",
__func__, DLOAD_USB_BASE_ADD);
return -ENXIO;
}
pr_debug("%s: dload:%p pid:%x serial_num:%s\n",
__func__, dload, pid, snum);
/* update pid */
dload->magic_struct.pid = PID_MAGIC_ID;
dload->pid = pid;
/* update serial number */
dload->magic_struct.serial_num = 0;
if (!snum) {
memset(dload->serial_number, 0, SERIAL_NUMBER_LENGTH);
goto out;
}
dload->magic_struct.serial_num = SERIAL_NUM_MAGIC_ID;
strlcpy(dload->serial_number, snum, SERIAL_NUMBER_LENGTH);
out:
iounmap(dload);
return 0;
}
static struct android_usb_platform_data android_usb_pdata = {
.update_pid_and_serial_num = usb_diag_update_pid_and_serial_num,
};
static struct platform_device android_usb_device = {
.name = "android_usb",
.id = -1,
.dev = {
.platform_data = &android_usb_pdata,
},
};
static uint8_t spm_wfi_cmd_sequence[] __initdata = {
0x03, 0x0f,
};
static uint8_t spm_retention_cmd_sequence[] __initdata = {
0x00, 0x05, 0x03, 0x0D,
0x0B, 0x00, 0x0f,
};
static uint8_t spm_retention_with_krait_v3_cmd_sequence[] __initdata = {
0x42, 0x1B, 0x00,
0x05, 0x03, 0x01, 0x0B,
0x00, 0x42, 0x1B,
0x0f,
};
static uint8_t spm_power_collapse_without_rpm[] __initdata = {
0x00, 0x24, 0x54, 0x10,
0x09, 0x03, 0x01,
0x10, 0x54, 0x30, 0x0C,
0x24, 0x30, 0x0f,
};
static uint8_t spm_power_collapse_with_rpm[] __initdata = {
0x00, 0x24, 0x54, 0x10,
0x09, 0x07, 0x01, 0x0B,
0x10, 0x54, 0x30, 0x0C,
0x24, 0x30, 0x0f,
};
/* 8960AB has a different command to assert apc_pdn */
static uint8_t spm_power_collapse_without_rpm_krait_v3[] __initdata = {
0x00, 0x24, 0x84, 0x10,
0x09, 0x03, 0x01,
0x10, 0x84, 0x30, 0x0C,
0x24, 0x30, 0x0f,
};
static uint8_t spm_power_collapse_with_rpm_krait_v3[] __initdata = {
0x00, 0x24, 0x84, 0x10,
0x09, 0x07, 0x01, 0x0B,
0x10, 0x84, 0x30, 0x0C,
0x24, 0x30, 0x0f,
};
static struct msm_spm_seq_entry msm_spm_boot_cpu_seq_list[] __initdata = {
[0] = {
.mode = MSM_SPM_MODE_CLOCK_GATING,
.notify_rpm = false,
.cmd = spm_wfi_cmd_sequence,
},
[1] = {
.mode = MSM_SPM_MODE_POWER_RETENTION,
.notify_rpm = false,
.cmd = spm_retention_cmd_sequence,
},
[2] = {
.mode = MSM_SPM_MODE_POWER_COLLAPSE,
.notify_rpm = false,
.cmd = spm_power_collapse_without_rpm,
},
[3] = {
.mode = MSM_SPM_MODE_POWER_COLLAPSE,
.notify_rpm = true,
.cmd = spm_power_collapse_with_rpm,
},
};
static struct msm_spm_seq_entry msm_spm_nonboot_cpu_seq_list[] __initdata = {
[0] = {
.mode = MSM_SPM_MODE_CLOCK_GATING,
.notify_rpm = false,
.cmd = spm_wfi_cmd_sequence,
},
[1] = {
.mode = MSM_SPM_MODE_POWER_RETENTION,
.notify_rpm = false,
.cmd = spm_retention_cmd_sequence,
},
[2] = {
.mode = MSM_SPM_MODE_POWER_COLLAPSE,
.notify_rpm = false,
.cmd = spm_power_collapse_without_rpm,
},
[3] = {
.mode = MSM_SPM_MODE_POWER_COLLAPSE,
.notify_rpm = true,
.cmd = spm_power_collapse_with_rpm,
},
};
static struct msm_spm_platform_data msm_spm_data[] __initdata = {
[0] = {
.reg_base_addr = MSM_SAW0_BASE,
.reg_init_values[MSM_SPM_REG_SAW2_CFG] = 0x1F,
#if defined(CONFIG_MSM_AVS_HW)
.reg_init_values[MSM_SPM_REG_SAW2_AVS_CTL] = 0x58589464,
.reg_init_values[MSM_SPM_REG_SAW2_AVS_HYSTERESIS] = 0x00020000,
#endif
.reg_init_values[MSM_SPM_REG_SAW2_SPM_CTL] = 0x01,
.reg_init_values[MSM_SPM_REG_SAW2_PMIC_DLY] = 0x03020004,
.reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_0] = 0x0084009C,
.reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_1] = 0x00A4001C,
.vctl_timeout_us = 50,
.num_modes = ARRAY_SIZE(msm_spm_boot_cpu_seq_list),
.modes = msm_spm_boot_cpu_seq_list,
},
[1] = {
.reg_base_addr = MSM_SAW1_BASE,
.reg_init_values[MSM_SPM_REG_SAW2_CFG] = 0x1F,
#if defined(CONFIG_MSM_AVS_HW)
.reg_init_values[MSM_SPM_REG_SAW2_AVS_CTL] = 0x58589464,
.reg_init_values[MSM_SPM_REG_SAW2_AVS_HYSTERESIS] = 0x00020000,
#endif
.reg_init_values[MSM_SPM_REG_SAW2_SPM_CTL] = 0x01,
.reg_init_values[MSM_SPM_REG_SAW2_PMIC_DLY] = 0x02020204,
.reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_0] = 0x0060009C,
.reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_1] = 0x0000001C,
.vctl_timeout_us = 50,
.num_modes = ARRAY_SIZE(msm_spm_nonboot_cpu_seq_list),
.modes = msm_spm_nonboot_cpu_seq_list,
},
};
static uint8_t l2_spm_wfi_cmd_sequence[] __initdata = {
0x00, 0x20, 0x03, 0x20,
0x00, 0x0f,
};
static uint8_t l2_spm_gdhs_cmd_sequence[] __initdata = {
0x00, 0x20, 0x34, 0x64,
0x48, 0x07, 0x48, 0x20,
0x50, 0x64, 0x04, 0x34,
0x50, 0x0f,
};
static uint8_t l2_spm_power_off_cmd_sequence[] __initdata = {
0x00, 0x10, 0x34, 0x64,
0x48, 0x07, 0x48, 0x10,
0x50, 0x64, 0x04, 0x34,
0x50, 0x0F,
};
static struct msm_spm_seq_entry msm_spm_l2_seq_list[] __initdata = {
[0] = {
.mode = MSM_SPM_L2_MODE_RETENTION,
.notify_rpm = false,
.cmd = l2_spm_wfi_cmd_sequence,
},
[1] = {
.mode = MSM_SPM_L2_MODE_GDHS,
.notify_rpm = true,
.cmd = l2_spm_gdhs_cmd_sequence,
},
[2] = {
.mode = MSM_SPM_L2_MODE_POWER_COLLAPSE,
.notify_rpm = true,
.cmd = l2_spm_power_off_cmd_sequence,
},
};
static struct msm_spm_platform_data msm_spm_l2_data[] __initdata = {
[0] = {
.reg_base_addr = MSM_SAW_L2_BASE,
.reg_init_values[MSM_SPM_REG_SAW2_SPM_CTL] = 0x00,
.reg_init_values[MSM_SPM_REG_SAW2_PMIC_DLY] = 0x02020204,
.reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_0] = 0x00A000AE,
.reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_1] = 0x00A00020,
.modes = msm_spm_l2_seq_list,
.num_modes = ARRAY_SIZE(msm_spm_l2_seq_list),
},
};
#define HAP_SHIFT_LVL_OE_GPIO 47
#define HAP_SHIFT_LVL_OE_GPIO_SGLTE 89
#define PM_HAP_EN_GPIO PM8921_GPIO_PM_TO_SYS(33)
#define PM_HAP_LEN_GPIO PM8921_GPIO_PM_TO_SYS(20)
static struct msm_xo_voter *xo_handle_d1;
static int isa1200_power(int on)
{
int rc = 0;
int hap_oe_gpio = HAP_SHIFT_LVL_OE_GPIO;
if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_SGLTE)
hap_oe_gpio = HAP_SHIFT_LVL_OE_GPIO_SGLTE;
gpio_set_value(hap_oe_gpio, !!on);
rc = on ? msm_xo_mode_vote(xo_handle_d1, MSM_XO_MODE_ON) :
msm_xo_mode_vote(xo_handle_d1, MSM_XO_MODE_OFF);
if (rc < 0) {
pr_err("%s: failed to %svote for TCXO D1 buffer%d\n",
__func__, on ? "" : "de-", rc);
goto err_xo_vote;
}
return 0;
err_xo_vote:
gpio_set_value(hap_oe_gpio, !on);
return rc;
}
static int isa1200_dev_setup(bool enable)
{
int rc = 0;
int hap_oe_gpio = HAP_SHIFT_LVL_OE_GPIO;
struct pm_gpio hap_gpio_config = {
.direction = PM_GPIO_DIR_OUT,
.pull = PM_GPIO_PULL_NO,
.out_strength = PM_GPIO_STRENGTH_HIGH,
.function = PM_GPIO_FUNC_NORMAL,
.inv_int_pol = 0,
.vin_sel = 2,
.output_buffer = PM_GPIO_OUT_BUF_CMOS,
.output_value = 0,
};
if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_SGLTE)
hap_oe_gpio = HAP_SHIFT_LVL_OE_GPIO_SGLTE;
if (enable == true) {
rc = pm8xxx_gpio_config(PM_HAP_EN_GPIO, &hap_gpio_config);
if (rc) {
pr_err("%s: pm8921 gpio %d config failed(%d)\n",
__func__, PM_HAP_EN_GPIO, rc);
return rc;
}
rc = pm8xxx_gpio_config(PM_HAP_LEN_GPIO, &hap_gpio_config);
if (rc) {
pr_err("%s: pm8921 gpio %d config failed(%d)\n",
__func__, PM_HAP_LEN_GPIO, rc);
return rc;
}
rc = gpio_request(hap_oe_gpio, "hap_shft_lvl_oe");
if (rc) {
pr_err("%s: unable to request gpio %d (%d)\n",
__func__, hap_oe_gpio, rc);
return rc;
}
rc = gpio_direction_output(hap_oe_gpio, 0);
if (rc) {
pr_err("%s: Unable to set direction\n", __func__);
goto free_gpio;
}
xo_handle_d1 = msm_xo_get(MSM_XO_TCXO_D1, "isa1200");
if (IS_ERR(xo_handle_d1)) {
rc = PTR_ERR(xo_handle_d1);
pr_err("%s: failed to get the handle for D1(%d)\n",
__func__, rc);
goto gpio_set_dir;
}
} else {
gpio_free(hap_oe_gpio);
msm_xo_put(xo_handle_d1);
}
return 0;
gpio_set_dir:
gpio_set_value(hap_oe_gpio, 0);
free_gpio:
gpio_free(hap_oe_gpio);
return rc;
}
static struct isa1200_regulator isa1200_reg_data[] = {
{
.name = "vcc_i2c",
.min_uV = ISA_I2C_VTG_MIN_UV,
.max_uV = ISA_I2C_VTG_MAX_UV,
.load_uA = ISA_I2C_CURR_UA,
},
};
static struct isa1200_platform_data isa1200_1_pdata = {
.name = "vibrator",
.dev_setup = isa1200_dev_setup,
.power_on = isa1200_power,
.hap_en_gpio = PM_HAP_EN_GPIO,
.hap_len_gpio = PM_HAP_LEN_GPIO,
.max_timeout = 15000,
.mode_ctrl = PWM_GEN_MODE,
.pwm_fd = {
.pwm_div = 256,
},
.is_erm = false,
.smart_en = true,
.ext_clk_en = true,
.chip_en = 1,
.regulator_info = isa1200_reg_data,
.num_regulators = ARRAY_SIZE(isa1200_reg_data),
};
static struct i2c_board_info msm_isa1200_board_info[] __initdata = {
{
I2C_BOARD_INFO("isa1200_1", 0x90>>1),
},
};
#define CYTTSP_TS_GPIO_IRQ 11
#define CYTTSP_TS_SLEEP_GPIO 50
#define CYTTSP_TS_RESOUT_N_GPIO 52
/*virtual key support */
static ssize_t tma340_vkeys_show(struct kobject *kobj,
struct kobj_attribute *attr, char *buf)
{
return snprintf(buf, 200,
__stringify(EV_KEY) ":" __stringify(KEY_BACK) ":73:1120:97:97"
":" __stringify(EV_KEY) ":" __stringify(KEY_MENU) ":230:1120:97:97"
":" __stringify(EV_KEY) ":" __stringify(KEY_HOME) ":389:1120:97:97"
":" __stringify(EV_KEY) ":" __stringify(KEY_SEARCH) ":544:1120:97:97"
"\n");
}
static struct kobj_attribute tma340_vkeys_attr = {
.attr = {
.mode = S_IRUGO,
},
.show = &tma340_vkeys_show,
};
static struct attribute *tma340_properties_attrs[] = {
&tma340_vkeys_attr.attr,
NULL
};
static struct attribute_group tma340_properties_attr_group = {
.attrs = tma340_properties_attrs,
};
static int cyttsp_platform_init(struct i2c_client *client)
{
int rc = 0;
static struct kobject *tma340_properties_kobj;
tma340_vkeys_attr.attr.name = "virtualkeys.cyttsp-i2c";
tma340_properties_kobj = kobject_create_and_add("board_properties",
NULL);
if (tma340_properties_kobj)
rc = sysfs_create_group(tma340_properties_kobj,
&tma340_properties_attr_group);
if (!tma340_properties_kobj || rc)
pr_err("%s: failed to create board_properties\n",
__func__);
return 0;
}
static struct cyttsp_regulator regulator_data[] = {
{
.name = "vdd",
.min_uV = CY_TMA300_VTG_MIN_UV,
.max_uV = CY_TMA300_VTG_MAX_UV,
.hpm_load_uA = CY_TMA300_CURR_24HZ_UA,
.lpm_load_uA = CY_TMA300_SLEEP_CURR_UA,
},
/* TODO: Remove after runtime PM is enabled in I2C driver */
{
.name = "vcc_i2c",
.min_uV = CY_I2C_VTG_MIN_UV,
.max_uV = CY_I2C_VTG_MAX_UV,
.hpm_load_uA = CY_I2C_CURR_UA,
.lpm_load_uA = CY_I2C_SLEEP_CURR_UA,
},
};
static struct cyttsp_platform_data cyttsp_pdata = {
.panel_maxx = 634,
.panel_maxy = 1166,
.disp_maxx = 616,
.disp_maxy = 1023,
.disp_minx = 0,
.disp_miny = 16,
.flags = 0x01,
.gen = CY_GEN3, /* or */
.use_st = CY_USE_ST,
.use_mt = CY_USE_MT,
.use_hndshk = CY_SEND_HNDSHK,
.use_trk_id = CY_USE_TRACKING_ID,
.use_sleep = CY_USE_DEEP_SLEEP_SEL | CY_USE_LOW_POWER_SEL,
.use_gestures = CY_USE_GESTURES,
.fw_fname = "cyttsp_8960_cdp.hex",
/* activate up to 4 groups
* and set active distance
*/
.gest_set = CY_GEST_GRP1 | CY_GEST_GRP2 |
CY_GEST_GRP3 | CY_GEST_GRP4 |
CY_ACT_DIST,
.act_intrvl = 10,
.tch_tmout = 200,
.lp_intrvl = 30,
.sleep_gpio = CYTTSP_TS_SLEEP_GPIO,
.resout_gpio = CYTTSP_TS_RESOUT_N_GPIO,
.irq_gpio = CYTTSP_TS_GPIO_IRQ,
.regulator_info = regulator_data,
.num_regulators = ARRAY_SIZE(regulator_data),
.init = cyttsp_platform_init,
.correct_fw_ver = 9,
};
static struct i2c_board_info cyttsp_info[] __initdata = {
{
I2C_BOARD_INFO(CY_I2C_NAME, 0x24),
.platform_data = &cyttsp_pdata,
#ifndef CY_USE_TIMER
.irq = MSM_GPIO_TO_INT(CYTTSP_TS_GPIO_IRQ),
#endif /* CY_USE_TIMER */
},
};
/* configuration data for mxt1386 */
static const u8 mxt1386_config_data[] = {
/* T6 Object */
0, 0, 0, 0, 0, 0,
/* T38 Object */
11, 2, 0, 11, 11, 11, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0,
/* T7 Object */
100, 16, 50,
/* T8 Object */
8, 0, 0, 0, 0, 0, 8, 14, 50, 215,
/* T9 Object */
131, 0, 0, 26, 42, 0, 32, 63, 3, 5,
0, 2, 1, 113, 10, 10, 8, 10, 255, 2,
85, 5, 0, 0, 20, 20, 75, 25, 202, 29,
10, 10, 45, 46,
/* T15 Object */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0,
/* T18 Object */
0, 0,
/* T22 Object */
5, 0, 0, 0, 0, 0, 0, 0, 30, 0,
0, 0, 5, 8, 10, 13, 0,
/* T24 Object */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0,
/* T25 Object */
3, 0, 188, 52, 52, 33, 0, 0, 0, 0,
0, 0, 0, 0,
/* T27 Object */
0, 0, 0, 0, 0, 0, 0,
/* T28 Object */
0, 0, 0, 8, 12, 60,
/* T40 Object */
0, 0, 0, 0, 0,
/* T41 Object */
0, 0, 0, 0, 0, 0,
/* T43 Object */
0, 0, 0, 0, 0, 0,
};
/* configuration data for mxt1386e using V1.0 firmware */
static const u8 mxt1386e_config_data_v1_0[] = {
/* T6 Object */
0, 0, 0, 0, 0, 0,
/* T38 Object */
12, 1, 0, 17, 1, 12, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0,
/* T7 Object */
100, 16, 50,
/* T8 Object */
25, 0, 20, 20, 0, 0, 20, 50, 0, 0,
/* T9 Object */
131, 0, 0, 26, 42, 0, 32, 80, 2, 5,
0, 5, 5, 0, 10, 30, 10, 10, 255, 2,
85, 5, 10, 10, 10, 10, 135, 55, 70, 40,
10, 5, 0, 0, 0,
/* T18 Object */
0, 0,
/* T24 Object */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0,
/* T25 Object */
3, 0, 60, 115, 156, 99,
/* T27 Object */
0, 0, 0, 0, 0, 0, 0,
/* T40 Object */
0, 0, 0, 0, 0,
/* T42 Object */
2, 0, 255, 0, 255, 0, 0, 0, 0, 0,
/* T43 Object */
0, 0, 0, 0, 0, 0, 0,
/* T46 Object */
64, 0, 20, 20, 0, 0, 0, 0, 0,
/* T47 Object */
0, 0, 0, 0, 0, 0, 3, 64, 66, 0,
/* T48 Object */
31, 64, 64, 0, 0, 0, 0, 0, 0, 0,
48, 40, 0, 10, 10, 0, 0, 100, 10, 80,
0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
52, 0, 12, 0, 17, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0,
/* T56 Object */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
2, 99, 33,
};
/* configuration data for mxt1386e using V2.1 firmware */
static const u8 mxt1386e_config_data_v2_1[] = {
/* T6 Object */
0, 0, 0, 0, 0, 0,
/* T38 Object */
12, 5, 0, 28, 8, 12, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0,
/* T7 Object */
32, 16, 50,
/* T8 Object */
25, 0, 20, 20, 0, 0, 20, 50, 0, 0,
/* T9 Object */
139, 0, 0, 26, 42, 0, 32, 80, 2, 5,
0, 5, 5, 79, 10, 30, 10, 10, 255, 2,
85, 5, 10, 10, 10, 10, 135, 55, 70, 40,
10, 5, 0, 0, 0,
/* T18 Object */
0, 0,
/* T24 Object */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0,
/* T25 Object */
1, 0, 60, 115, 156, 99,
/* T27 Object */
0, 0, 0, 0, 0, 0, 0,
/* T40 Object */
0, 0, 0, 0, 0,
/* T42 Object */
0, 0, 255, 0, 255, 0, 0, 0, 0, 0,
/* T43 Object */
0, 0, 0, 0, 0, 0, 0, 64, 0, 8,
16,
/* T46 Object */
64, 0, 16, 16, 0, 0, 0, 0, 0,
/* T47 Object */
0, 0, 0, 0, 0, 0, 3, 64, 66, 0,
/* T48 Object */
1, 64, 64, 0, 0, 0, 0, 0, 0, 0,
48, 40, 0, 10, 10, 0, 0, 100, 10, 80,
0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
52, 0, 12, 0, 17, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0,
/* T56 Object */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
2, 99, 33, 0, 149, 24, 193, 255, 255, 255,
255,
};
/* configuration data for mxt1386e on 3D SKU using V2.1 firmware */
static const u8 mxt1386e_config_data_3d[] = {
/* T6 Object */
0, 0, 0, 0, 0, 0,
/* T38 Object */
13, 1, 0, 23, 2, 12, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0,
/* T7 Object */
100, 10, 50,
/* T8 Object */
25, 0, 20, 20, 0, 0, 0, 0, 0, 0,
/* T9 Object */
131, 0, 0, 26, 42, 0, 32, 80, 2, 5,
0, 5, 5, 0, 10, 30, 10, 10, 175, 4,
127, 7, 26, 21, 17, 19, 143, 35, 207, 40,
20, 5, 54, 49, 0,
/* T18 Object */
0, 0,
/* T24 Object */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0,
/* T25 Object */
0, 0, 72, 113, 168, 97,
/* T27 Object */
0, 0, 0, 0, 0, 0, 0,
/* T40 Object */
0, 0, 0, 0, 0,
/* T42 Object */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/* T43 Object */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0,
/* T46 Object */
68, 0, 16, 16, 0, 0, 0, 0, 0,
/* T47 Object */
0, 0, 0, 0, 0, 0, 3, 64, 66, 0,
/* T48 Object */
31, 64, 64, 0, 0, 0, 0, 0, 0, 0,
32, 50, 0, 10, 10, 0, 0, 100, 10, 90,
0, 0, 0, 0, 0, 0, 0, 10, 1, 30,
52, 10, 5, 0, 33, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0,
/* T56 Object */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0,
};
#define MXT_TS_GPIO_IRQ 11
#define MXT_TS_LDO_EN_GPIO 50
#define MXT_TS_RESET_GPIO 52
static void mxt_init_hw_liquid(void)
{
int rc;
rc = gpio_request(MXT_TS_LDO_EN_GPIO, "mxt_ldo_en_gpio");
if (rc) {
pr_err("%s: unable to request mxt_ldo_en_gpio [%d]\n",
__func__, MXT_TS_LDO_EN_GPIO);
return;
}
rc = gpio_direction_output(MXT_TS_LDO_EN_GPIO, 1);
if (rc) {
pr_err("%s: unable to set_direction for mxt_ldo_en_gpio [%d]\n",
__func__, MXT_TS_LDO_EN_GPIO);
goto err_ldo_gpio_req;
}
return;
err_ldo_gpio_req:
gpio_free(MXT_TS_LDO_EN_GPIO);
}
static struct mxt_config_info mxt_config_array_2d[] = {
{
.config = mxt1386_config_data,
.config_length = ARRAY_SIZE(mxt1386_config_data),
.family_id = 0xA0,
.variant_id = 0x0,
.version = 0x10,
.build = 0xAA,
.bootldr_id = MXT_BOOTLOADER_ID_1386,
},
{
.config = mxt1386e_config_data_v1_0,
.config_length = ARRAY_SIZE(mxt1386e_config_data_v1_0),
.family_id = 0xA0,
.variant_id = 0x2,
.version = 0x10,
.build = 0xAA,
.bootldr_id = MXT_BOOTLOADER_ID_1386E,
.fw_name = "atmel_8960_liquid_v2_2_AA.hex",
},
{
.config = mxt1386e_config_data_v2_1,
.config_length = ARRAY_SIZE(mxt1386e_config_data_v2_1),
.family_id = 0xA0,
.variant_id = 0x7,
.version = 0x21,
.build = 0xAA,
.bootldr_id = MXT_BOOTLOADER_ID_1386E,
.fw_name = "atmel_8960_liquid_v2_2_AA.hex",
},
{
/* The config data for V2.2.AA is the same as for V2.1.AA */
.config = mxt1386e_config_data_v2_1,
.config_length = ARRAY_SIZE(mxt1386e_config_data_v2_1),
.family_id = 0xA0,
.variant_id = 0x7,
.version = 0x22,
.build = 0xAA,
.bootldr_id = MXT_BOOTLOADER_ID_1386E,
},
};
static struct mxt_platform_data mxt_platform_data_2d = {
.config_array = mxt_config_array_2d,
.config_array_size = ARRAY_SIZE(mxt_config_array_2d),
.panel_minx = 0,
.panel_maxx = 1365,
.panel_miny = 0,
.panel_maxy = 767,
.disp_minx = 0,
.disp_maxx = 1365,
.disp_miny = 0,
.disp_maxy = 767,
.irqflags = IRQF_TRIGGER_FALLING,
.i2c_pull_up = true,
.reset_gpio = MXT_TS_RESET_GPIO,
.irq_gpio = MXT_TS_GPIO_IRQ,
};
static struct mxt_config_info mxt_config_array_3d[] = {
{
.config = mxt1386e_config_data_3d,
.config_length = ARRAY_SIZE(mxt1386e_config_data_3d),
.family_id = 0xA0,
.variant_id = 0x7,
.version = 0x21,
.build = 0xAA,
},
};
static struct mxt_platform_data mxt_platform_data_3d = {
.config_array = mxt_config_array_3d,
.config_array_size = ARRAY_SIZE(mxt_config_array_3d),
.panel_minx = 0,
.panel_maxx = 1919,
.panel_miny = 0,
.panel_maxy = 1199,
.disp_minx = 0,
.disp_maxx = 1919,
.disp_miny = 0,
.disp_maxy = 1199,
.irqflags = IRQF_TRIGGER_FALLING,
.i2c_pull_up = true,
.reset_gpio = MXT_TS_RESET_GPIO,
.irq_gpio = MXT_TS_GPIO_IRQ,
};
static struct i2c_board_info mxt_device_info[] __initdata = {
{
I2C_BOARD_INFO("atmel_mxt_ts", 0x5b),
.irq = MSM_GPIO_TO_INT(MXT_TS_GPIO_IRQ),
},
};
static struct msm_mhl_platform_data mhl_platform_data = {
.irq = MSM_GPIO_TO_INT(4),
.gpio_mhl_int = MHL_GPIO_INT,
.gpio_mhl_reset = MHL_GPIO_RESET,
.gpio_mhl_power = 0,
.gpio_hdmi_mhl_mux = 0,
};
static struct i2c_board_info sii_device_info[] __initdata = {
{
#ifdef CONFIG_FB_MSM_HDMI_MHL_8334
/*
* keeps SI 8334 as the default
* MHL TX
*/
I2C_BOARD_INFO("sii8334", 0x39),
.platform_data = &mhl_platform_data,
#endif
#ifdef CONFIG_FB_MSM_HDMI_MHL_9244
I2C_BOARD_INFO("Sil-9244", 0x39),
.irq = MSM_GPIO_TO_INT(15),
#endif /* CONFIG_MSM_HDMI_MHL */
.flags = I2C_CLIENT_WAKE,
},
};
static struct msm_i2c_platform_data msm8960_i2c_qup_gsbi4_pdata = {
.clk_freq = 100000,
.src_clk_rate = 24000000,
};
static struct msm_i2c_platform_data msm8960_i2c_qup_gsbi3_pdata = {
.clk_freq = 100000,
.src_clk_rate = 24000000,
};
static struct msm_i2c_platform_data msm8960_i2c_qup_gsbi10_pdata = {
.clk_freq = 100000,
.src_clk_rate = 24000000,
};
static struct msm_i2c_platform_data msm8960_i2c_qup_gsbi12_pdata = {
.clk_freq = 100000,
.src_clk_rate = 24000000,
};
static struct ks8851_pdata spi_eth_pdata = {
.irq_gpio = KS8851_IRQ_GPIO,
.rst_gpio = KS8851_RST_GPIO,
};
static struct spi_board_info spi_eth_info[] __initdata = {
{
.modalias = "ks8851",
.irq = MSM_GPIO_TO_INT(KS8851_IRQ_GPIO),
.max_speed_hz = 19200000,
.bus_num = 0,
.chip_select = 0,
.mode = SPI_MODE_0,
.platform_data = &spi_eth_pdata
},
};
static struct spi_board_info spi_board_info[] __initdata = {
{
.modalias = "dsi_novatek_3d_panel_spi",
.max_speed_hz = 10800000,
.bus_num = 0,
.chip_select = 1,
.mode = SPI_MODE_0,
},
};
static struct platform_device msm_device_saw_core0 = {
.name = "saw-regulator",
.id = 0,
.dev = {
.platform_data = &msm_saw_regulator_pdata_s5,
},
};
static struct platform_device msm_device_saw_core1 = {
.name = "saw-regulator",
.id = 1,
.dev = {
.platform_data = &msm_saw_regulator_pdata_s6,
},
};
static struct tsens_platform_data msm_tsens_pdata = {
.slope = {910, 910, 910, 910, 910},
.tsens_factor = 1000,
.hw_type = MSM_8960,
.tsens_num_sensor = 5,
};
static struct platform_device msm_tsens_device = {
.name = "tsens8960-tm",
.id = -1,
};
static struct msm_thermal_data msm_thermal_pdata = {
.sensor_id = 0,
.poll_ms = 250,
.limit_temp_degC = 60,
.temp_hysteresis_degC = 10,
.freq_step = 2,
};
#ifdef CONFIG_MSM_FAKE_BATTERY
static struct platform_device fish_battery_device = {
.name = "fish_battery",
};
#endif
#ifdef CONFIG_BATTERY_BCL
static struct platform_device battery_bcl_device = {
.name = "battery_current_limit",
.id = -1,
};
#endif
static struct platform_device msm8960_device_ext_5v_vreg __devinitdata = {
.name = GPIO_REGULATOR_DEV_NAME,
.id = PM8921_MPP_PM_TO_SYS(7),
.dev = {
.platform_data = &msm_gpio_regulator_pdata[GPIO_VREG_ID_EXT_5V],
},
};
static struct platform_device msm8960_device_ext_l2_vreg __devinitdata = {
.name = GPIO_REGULATOR_DEV_NAME,
.id = 91,
.dev = {
.platform_data = &msm_gpio_regulator_pdata[GPIO_VREG_ID_EXT_L2],
},
};
static struct platform_device msm8960_device_ext_3p3v_vreg __devinitdata = {
.name = GPIO_REGULATOR_DEV_NAME,
.id = PM8921_GPIO_PM_TO_SYS(17),
.dev = {
.platform_data =
&msm_gpio_regulator_pdata[GPIO_VREG_ID_EXT_3P3V],
},
};
static struct platform_device msm8960_device_ext_otg_sw_vreg __devinitdata = {
.name = GPIO_REGULATOR_DEV_NAME,
.id = PM8921_GPIO_PM_TO_SYS(42),
.dev = {
.platform_data =
&msm_gpio_regulator_pdata[GPIO_VREG_ID_EXT_OTG_SW],
},
};
static struct platform_device msm8960_device_rpm_regulator __devinitdata = {
.name = "rpm-regulator",
.id = -1,
.dev = {
.platform_data = &msm_rpm_regulator_pdata,
},
};
#ifdef CONFIG_SERIAL_MSM_HS
static int configure_uart_gpios(int on)
{
int ret = 0, i;
int uart_gpios[] = {93, 94, 95, 96};
for (i = 0; i < ARRAY_SIZE(uart_gpios); i++) {
if (on) {
ret = gpio_request(uart_gpios[i], NULL);
if (ret) {
pr_err("%s: unable to request uart gpio[%d]\n",
__func__, uart_gpios[i]);
break;
}
} else {
gpio_free(uart_gpios[i]);
}
}
if (ret && on && i)
for (; i >= 0; i--)
gpio_free(uart_gpios[i]);
return ret;
}
static struct msm_serial_hs_platform_data msm_uart_dm9_pdata = {
.gpio_config = configure_uart_gpios,
};
static int configure_gsbi8_uart_gpios(int on)
{
int ret = 0, i;
int uart_gpios[] = {34, 35, 36, 37};
for (i = 0; i < ARRAY_SIZE(uart_gpios); i++) {
if (on) {
ret = gpio_request(uart_gpios[i], NULL);
if (ret) {
pr_err("%s: unable to request uart gpio[%d]\n",
__func__, uart_gpios[i]);
break;
}
} else {
gpio_free(uart_gpios[i]);
}
}
if (ret && on && i)
for (; i >= 0; i--)
gpio_free(uart_gpios[i]);
return ret;
}
static struct msm_serial_hs_platform_data msm_uart_dm8_pdata = {
.gpio_config = configure_gsbi8_uart_gpios,
};
#else
static struct msm_serial_hs_platform_data msm_uart_dm8_pdata;
static struct msm_serial_hs_platform_data msm_uart_dm9_pdata;
#endif
#if defined(CONFIG_BT) && defined(CONFIG_BT_HCIUART_ATH3K)
enum WLANBT_STATUS {
WLANOFF_BTOFF = 1,
WLANOFF_BTON,
WLANON_BTOFF,
WLANON_BTON
};
static DEFINE_MUTEX(ath_wlanbt_mutex);
static int gpio_wlan_sys_rest_en = 26;
static int ath_wlanbt_status = WLANOFF_BTOFF;
static int ath6kl_power_control(int on)
{
int rc;
if (on) {
rc = gpio_request(gpio_wlan_sys_rest_en, "wlan sys_rst_n");
if (rc) {
pr_err("%s: unable to request gpio %d (%d)\n",
__func__, gpio_wlan_sys_rest_en, rc);
return rc;
}
rc = gpio_direction_output(gpio_wlan_sys_rest_en, 0);
msleep(200);
rc = gpio_direction_output(gpio_wlan_sys_rest_en, 1);
msleep(100);
} else {
gpio_set_value(gpio_wlan_sys_rest_en, 0);
rc = gpio_direction_input(gpio_wlan_sys_rest_en);
msleep(100);
gpio_free(gpio_wlan_sys_rest_en);
}
return 0;
};
static int ath6kl_wlan_power(int on)
{
int ret = 0;
mutex_lock(&ath_wlanbt_mutex);
if (on) {
if (ath_wlanbt_status == WLANOFF_BTOFF) {
ret = ath6kl_power_control(1);
ath_wlanbt_status = WLANON_BTOFF;
} else if (ath_wlanbt_status == WLANOFF_BTON)
ath_wlanbt_status = WLANON_BTON;
} else {
if (ath_wlanbt_status == WLANON_BTOFF) {
ret = ath6kl_power_control(0);
ath_wlanbt_status = WLANOFF_BTOFF;
} else if (ath_wlanbt_status == WLANON_BTON)
ath_wlanbt_status = WLANOFF_BTON;
}
mutex_unlock(&ath_wlanbt_mutex);
pr_debug("%s on= %d, wlan_status= %d\n",
__func__, on, ath_wlanbt_status);
return ret;
};
static struct wifi_platform_data ath6kl_wifi_control = {
.set_power = ath6kl_wlan_power,
};
static struct platform_device msm_wlan_power_device = {
.name = "ath6kl_power",
.dev = {
.platform_data = &ath6kl_wifi_control,
},
};
static struct resource bluesleep_resources[] = {
{
.name = "gpio_host_wake",
.start = 27,
.end = 27,
.flags = IORESOURCE_IO,
},
{
.name = "gpio_ext_wake",
.start = 29,
.end = 29,
.flags = IORESOURCE_IO,
},
{
.name = "host_wake",
.start = MSM_GPIO_TO_INT(27),
.end = MSM_GPIO_TO_INT(27),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device msm_bluesleep_device = {
.name = "bluesleep",
.id = -1,
.num_resources = ARRAY_SIZE(bluesleep_resources),
.resource = bluesleep_resources,
};
static struct platform_device msm_bt_power_device = {
.name = "bt_power",
};
static int gpio_bt_sys_rest_en = 28;
static int bluetooth_power(int on)
{
int rc;
mutex_lock(&ath_wlanbt_mutex);
if (on) {
if (ath_wlanbt_status == WLANOFF_BTOFF) {
ath6kl_power_control(1);
ath_wlanbt_status = WLANOFF_BTON;
} else if (ath_wlanbt_status == WLANON_BTOFF)
ath_wlanbt_status = WLANON_BTON;
rc = gpio_request(gpio_bt_sys_rest_en, "bt sys_rst_n");
if (rc) {
pr_err("%s: unable to request gpio %d (%d)\n",
__func__, gpio_bt_sys_rest_en, rc);
mutex_unlock(&ath_wlanbt_mutex);
return rc;
}
rc = gpio_direction_output(gpio_bt_sys_rest_en, 0);
msleep(20);
rc = gpio_direction_output(gpio_bt_sys_rest_en, 1);
msleep(100);
} else {
gpio_set_value(gpio_bt_sys_rest_en, 0);
rc = gpio_direction_input(gpio_bt_sys_rest_en);
msleep(100);
gpio_free(gpio_bt_sys_rest_en);
if (ath_wlanbt_status == WLANOFF_BTON) {
ath6kl_power_control(0);
ath_wlanbt_status = WLANOFF_BTOFF;
} else if (ath_wlanbt_status == WLANON_BTON)
ath_wlanbt_status = WLANON_BTOFF;
}
mutex_unlock(&ath_wlanbt_mutex);
pr_debug("%s on= %d, wlan_status= %d\n",
__func__, on, ath_wlanbt_status);
return 0;
};
static void __init bt_power_init(void)
{
msm_bt_power_device.dev.platform_data = &bluetooth_power;
return;
};
#else
#define bt_power_init(x) do {} while (0)
#endif
static struct platform_device *common_devices[] __initdata = {
&msm8960_device_dmov,
&msm_device_smd,
&msm_device_uart_dm6,
&msm_device_saw_core0,
&msm_device_saw_core1,
&msm8960_device_ext_5v_vreg,
&msm8960_device_ssbi_pmic,
&msm8960_device_ext_otg_sw_vreg,
&msm8960_device_qup_spi_gsbi1,
&msm8960_device_qup_i2c_gsbi3,
&msm8960_device_qup_i2c_gsbi4,
&msm8960_device_qup_i2c_gsbi10,
#ifndef CONFIG_MSM_DSPS
&msm8960_device_qup_i2c_gsbi12,
#endif
&msm_slim_ctrl,
&msm_device_wcnss_wlan,
#if defined(CONFIG_BT) && defined(CONFIG_BT_HCIUART_ATH3K)
&msm_bluesleep_device,
&msm_bt_power_device,
&msm_wlan_power_device,
#endif
#if defined(CONFIG_QSEECOM)
&qseecom_device,
#endif
#if defined(CONFIG_CRYPTO_DEV_QCRYPTO) || \
defined(CONFIG_CRYPTO_DEV_QCRYPTO_MODULE)
&qcrypto_device,
#endif
#if defined(CONFIG_CRYPTO_DEV_QCEDEV) || \
defined(CONFIG_CRYPTO_DEV_QCEDEV_MODULE)
&qcedev_device,
#endif
#ifdef CONFIG_MSM_ROTATOR
&msm_rotator_device,
#endif
&msm_device_sps,
#ifdef CONFIG_MSM_FAKE_BATTERY
&fish_battery_device,
#endif
#ifdef CONFIG_BATTERY_BCL
&battery_bcl_device,
#endif
&msm8960_fmem_device,
#ifdef CONFIG_ANDROID_PMEM
#ifndef CONFIG_MSM_MULTIMEDIA_USE_ION
&msm8960_android_pmem_device,
&msm8960_android_pmem_adsp_device,
&msm8960_android_pmem_audio_device,
#endif
#endif
&msm_device_bam_dmux,
&msm_fm_platform_init,
#if defined(CONFIG_TSIF) || defined(CONFIG_TSIF_MODULE)
#ifdef CONFIG_MSM_USE_TSIF1
&msm_device_tsif[1],
#else
&msm_device_tsif[0],
#endif
#endif
&msm_device_tspp,
#ifdef CONFIG_HW_RANDOM_MSM
&msm_device_rng,
#endif
#ifdef CONFIG_ION_MSM
&msm8960_ion_dev,
#endif
&msm8960_rpm_device,
&msm8960_rpm_log_device,
&msm8960_rpm_stat_device,
&msm8960_rpm_master_stat_device,
&msm_device_tz_log,
&coresight_tpiu_device,
&coresight_etb_device,
&coresight_funnel_device,
&coresight_etm0_device,
&coresight_etm1_device,
&msm_device_dspcrashd_8960,
&msm8960_device_watchdog,
&msm8960_rtb_device,
&msm8960_device_cache_erp,
&msm8960_device_ebi1_ch0_erp,
&msm8960_device_ebi1_ch1_erp,
&msm8960_cache_dump_device,
&msm8960_iommu_domain_device,
&msm_tsens_device,
};
static struct platform_device *cdp_devices[] __initdata = {
&msm_8960_q6_lpass,
&msm_8960_riva,
&msm_pil_tzapps,
&msm_pil_dsps,
&msm_pil_vidc,
&msm8960_device_otg,
&msm8960_device_gadget_peripheral,
&msm_device_hsusb_host,
&android_usb_device,
&msm_pcm,
&msm_multi_ch_pcm,
&msm_lowlatency_pcm,
&msm_pcm_routing,
&msm_cpudai0,
&msm_cpudai1,
&msm8960_cpudai_slimbus_2_rx,
&msm8960_cpudai_slimbus_2_tx,
&msm_cpudai_hdmi_rx,
&msm_cpudai_bt_rx,
&msm_cpudai_bt_tx,
&msm_cpudai_fm_rx,
&msm_cpudai_fm_tx,
&msm_cpudai_auxpcm_rx,
&msm_cpudai_auxpcm_tx,
&msm_cpu_fe,
&msm_stub_codec,
#ifdef CONFIG_MSM_GEMINI
&msm8960_gemini_device,
#endif
#ifdef CONFIG_MSM_MERCURY
&msm8960_mercury_device,
#endif
&msm_voice,
&msm_voip,
&msm_lpa_pcm,
&msm_cpudai_afe_01_rx,
&msm_cpudai_afe_01_tx,
&msm_cpudai_afe_02_rx,
&msm_cpudai_afe_02_tx,
&msm_pcm_afe,
&msm_compr_dsp,
&msm_cpudai_incall_music_rx,
&msm_cpudai_incall_record_rx,
&msm_cpudai_incall_record_tx,
&msm_pcm_hostless,
&msm_bus_apps_fabric,
&msm_bus_sys_fabric,
&msm_bus_mm_fabric,
&msm_bus_sys_fpb,
&msm_bus_cpss_fpb,
};
static void __init msm8960_i2c_init(void)
{
if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_SGLTE)
msm8960_i2c_qup_gsbi4_pdata.keep_ahb_clk_on = 1;
msm8960_device_qup_i2c_gsbi4.dev.platform_data =
&msm8960_i2c_qup_gsbi4_pdata;
msm8960_device_qup_i2c_gsbi3.dev.platform_data =
&msm8960_i2c_qup_gsbi3_pdata;
msm8960_device_qup_i2c_gsbi10.dev.platform_data =
&msm8960_i2c_qup_gsbi10_pdata;
msm8960_device_qup_i2c_gsbi12.dev.platform_data =
&msm8960_i2c_qup_gsbi12_pdata;
}
static void __init msm8960_gfx_init(void)
{
struct kgsl_device_platform_data *kgsl_3d0_pdata =
msm_kgsl_3d0.dev.platform_data;
uint32_t soc_platform_version = socinfo_get_version();
/* Fixup data that needs to change based on GPU ID */
if (cpu_is_msm8960ab()) {
kgsl_3d0_pdata->chipid = ADRENO_CHIPID(3, 2, 1, 0);
/* 8960PRO nominal clock rate is 320Mhz */
kgsl_3d0_pdata->pwrlevel[1].gpu_freq = 320000000;
#ifdef CONFIG_MSM_BUS_SCALING
kgsl_3d0_pdata->bus_scale_table = &grp3d_bus_scale_pdata_ab;
#endif
/*
* If this an A320 GPU device (MSM8960AB), then
* switch the resource table to 8960AB, to reflect the
* separate register and shader memory mapping used in A320.
*/
msm_kgsl_3d0.num_resources = kgsl_num_resources_8960ab;
msm_kgsl_3d0.resource = kgsl_3d0_resources_8960ab;
} else {
kgsl_3d0_pdata->iommu_count = 1;
if (SOCINFO_VERSION_MAJOR(soc_platform_version) == 1) {
kgsl_3d0_pdata->pwrlevel[0].gpu_freq = 320000000;
kgsl_3d0_pdata->pwrlevel[1].gpu_freq = 266667000;
}
if (SOCINFO_VERSION_MAJOR(soc_platform_version) >= 3) {
/* 8960v3 GPU registers returns 5 for patch release
* but it should be 6, so dummy up the chipid here
* based the platform type
*/
kgsl_3d0_pdata->chipid = ADRENO_CHIPID(2, 2, 0, 6);
}
}
/* Register the 3D core */
platform_device_register(&msm_kgsl_3d0);
/* Register the 2D cores if we are not 8960PRO */
if (!cpu_is_msm8960ab()) {
platform_device_register(&msm_kgsl_2d0);
platform_device_register(&msm_kgsl_2d1);
}
}
static struct msm_rpmrs_level msm_rpmrs_levels[] = {
{
MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT,
MSM_RPMRS_LIMITS(ON, ACTIVE, MAX, ACTIVE),
true,
1, 784, 180000, 100,
},
{
MSM_PM_SLEEP_MODE_RETENTION,
MSM_RPMRS_LIMITS(ON, ACTIVE, MAX, ACTIVE),
true,
415, 715, 340827, 475,
},
{
MSM_PM_SLEEP_MODE_POWER_COLLAPSE_STANDALONE,
MSM_RPMRS_LIMITS(ON, ACTIVE, MAX, ACTIVE),
true,
1300, 228, 1200000, 2000,
},
{
MSM_PM_SLEEP_MODE_POWER_COLLAPSE,
MSM_RPMRS_LIMITS(ON, GDHS, MAX, ACTIVE),
false,
2000, 138, 1208400, 3200,
},
{
MSM_PM_SLEEP_MODE_POWER_COLLAPSE,
MSM_RPMRS_LIMITS(ON, HSFS_OPEN, ACTIVE, RET_HIGH),
false,
6000, 119, 1850300, 9000,
},
{
MSM_PM_SLEEP_MODE_POWER_COLLAPSE,
MSM_RPMRS_LIMITS(OFF, GDHS, MAX, ACTIVE),
false,
9200, 68, 2839200, 16400,
},
{
MSM_PM_SLEEP_MODE_POWER_COLLAPSE,
MSM_RPMRS_LIMITS(OFF, HSFS_OPEN, MAX, ACTIVE),
false,
10300, 63, 3128000, 18200,
},
{
MSM_PM_SLEEP_MODE_POWER_COLLAPSE,
MSM_RPMRS_LIMITS(OFF, HSFS_OPEN, ACTIVE, RET_HIGH),
false,
18000, 10, 4602600, 27000,
},
{
MSM_PM_SLEEP_MODE_POWER_COLLAPSE,
MSM_RPMRS_LIMITS(OFF, HSFS_OPEN, RET_HIGH, RET_LOW),
false,
20000, 2, 5752000, 32000,
},
};
static struct msm_rpmrs_platform_data msm_rpmrs_data __initdata = {
.levels = &msm_rpmrs_levels[0],
.num_levels = ARRAY_SIZE(msm_rpmrs_levels),
.vdd_mem_levels = {
[MSM_RPMRS_VDD_MEM_RET_LOW] = 750000,
[MSM_RPMRS_VDD_MEM_RET_HIGH] = 750000,
[MSM_RPMRS_VDD_MEM_ACTIVE] = 1050000,
[MSM_RPMRS_VDD_MEM_MAX] = 1150000,
},
.vdd_dig_levels = {
[MSM_RPMRS_VDD_DIG_RET_LOW] = 500000,
[MSM_RPMRS_VDD_DIG_RET_HIGH] = 750000,
[MSM_RPMRS_VDD_DIG_ACTIVE] = 950000,
[MSM_RPMRS_VDD_DIG_MAX] = 1150000,
},
.vdd_mask = 0x7FFFFF,
.rpmrs_target_id = {
[MSM_RPMRS_ID_PXO_CLK] = MSM_RPM_ID_PXO_CLK,
[MSM_RPMRS_ID_L2_CACHE_CTL] = MSM_RPM_ID_LAST,
[MSM_RPMRS_ID_VDD_DIG_0] = MSM_RPM_ID_PM8921_S3_0,
[MSM_RPMRS_ID_VDD_DIG_1] = MSM_RPM_ID_PM8921_S3_1,
[MSM_RPMRS_ID_VDD_MEM_0] = MSM_RPM_ID_PM8921_L24_0,
[MSM_RPMRS_ID_VDD_MEM_1] = MSM_RPM_ID_PM8921_L24_1,
[MSM_RPMRS_ID_RPM_CTL] = MSM_RPM_ID_RPM_CTL,
},
};
static struct msm_pm_boot_platform_data msm_pm_boot_pdata __initdata = {
.mode = MSM_PM_BOOT_CONFIG_TZ,
};
#ifdef CONFIG_I2C
#define I2C_SURF 1
#define I2C_FFA (1 << 1)
#define I2C_RUMI (1 << 2)
#define I2C_SIM (1 << 3)
#define I2C_FLUID (1 << 4)
#define I2C_LIQUID (1 << 5)
struct i2c_registry {
u8 machs;
int bus;
struct i2c_board_info *info;
int len;
};
/* Sensors DSPS platform data */
#ifdef CONFIG_MSM_DSPS
#define DSPS_PIL_GENERIC_NAME "dsps"
#endif /* CONFIG_MSM_DSPS */
static void __init msm8960_init_dsps(void)
{
#ifdef CONFIG_MSM_DSPS
struct msm_dsps_platform_data *pdata =
msm_dsps_device.dev.platform_data;
pdata->pil_name = DSPS_PIL_GENERIC_NAME;
pdata->gpios = NULL;
pdata->gpios_num = 0;
platform_device_register(&msm_dsps_device);
#endif /* CONFIG_MSM_DSPS */
}
static int hsic_peripheral_status = 1;
static DEFINE_MUTEX(hsic_status_lock);
void peripheral_connect()
{
mutex_lock(&hsic_status_lock);
if (hsic_peripheral_status)
goto out;
platform_device_add(&msm_device_hsic_host);
hsic_peripheral_status = 1;
out:
mutex_unlock(&hsic_status_lock);
}
EXPORT_SYMBOL(peripheral_connect);
void peripheral_disconnect()
{
mutex_lock(&hsic_status_lock);
if (!hsic_peripheral_status)
goto out;
platform_device_del(&msm_device_hsic_host);
hsic_peripheral_status = 0;
out:
mutex_unlock(&hsic_status_lock);
}
EXPORT_SYMBOL(peripheral_disconnect);
static void __init msm8960_init_smsc_hub(void)
{
uint32_t version = socinfo_get_version();
if (SOCINFO_VERSION_MAJOR(version) == 1)
return;
if (machine_is_msm8960_liquid())
platform_device_register(&smsc_hub_device);
}
static void __init msm8960_init_hsic(void)
{
#ifdef CONFIG_USB_EHCI_MSM_HSIC
uint32_t version = socinfo_get_version();
if (SOCINFO_VERSION_MAJOR(version) == 1)
return;
if (machine_is_msm8960_liquid())
platform_device_register(&msm_device_hsic_host);
#endif
}
#ifdef CONFIG_ISL9519_CHARGER
static struct isl_platform_data isl_data __initdata = {
.valid_n_gpio = 0, /* Not required when notify-by-pmic */
.chg_detection_config = NULL, /* Not required when notify-by-pmic */
.max_system_voltage = 4200,
.min_system_voltage = 3200,
.chgcurrent = 1900,
.term_current = 0,
.input_current = 2048,
};
static struct i2c_board_info isl_charger_i2c_info[] __initdata = {
{
I2C_BOARD_INFO("isl9519q", 0x9),
.irq = 0, /* Not required when notify-by-pmic */
.platform_data = &isl_data,
},
};
#endif /* CONFIG_ISL9519_CHARGER */
static struct i2c_board_info liquid_io_expander_i2c_info[] __initdata = {
{
I2C_BOARD_INFO("sx1508q", 0x20),
.platform_data = &msm8960_sx150x_data[SX150X_LIQUID]
},
};
static struct i2c_registry msm8960_i2c_devices[] __initdata = {
#ifdef CONFIG_ISL9519_CHARGER
{
I2C_LIQUID,
MSM_8960_GSBI10_QUP_I2C_BUS_ID,
isl_charger_i2c_info,
ARRAY_SIZE(isl_charger_i2c_info),
},
#endif /* CONFIG_ISL9519_CHARGER */
{
I2C_SURF | I2C_FFA | I2C_FLUID,
MSM_8960_GSBI3_QUP_I2C_BUS_ID,
cyttsp_info,
ARRAY_SIZE(cyttsp_info),
},
{
I2C_LIQUID,
MSM_8960_GSBI3_QUP_I2C_BUS_ID,
mxt_device_info,
ARRAY_SIZE(mxt_device_info),
},
{
I2C_SURF | I2C_FFA | I2C_LIQUID,
MSM_8960_GSBI10_QUP_I2C_BUS_ID,
sii_device_info,
ARRAY_SIZE(sii_device_info),
},
{
I2C_LIQUID | I2C_FFA,
MSM_8960_GSBI10_QUP_I2C_BUS_ID,
msm_isa1200_board_info,
ARRAY_SIZE(msm_isa1200_board_info),
},
{
I2C_LIQUID,
MSM_8960_GSBI10_QUP_I2C_BUS_ID,
liquid_io_expander_i2c_info,
ARRAY_SIZE(liquid_io_expander_i2c_info),
},
};
#endif /* CONFIG_I2C */
static void __init register_i2c_devices(void)
{
#ifdef CONFIG_I2C
u8 mach_mask = 0;
int i;
#ifdef CONFIG_MSM_CAMERA
struct i2c_registry msm8960_camera_i2c_devices = {
I2C_SURF | I2C_FFA | I2C_FLUID | I2C_LIQUID | I2C_RUMI,
MSM_8960_GSBI4_QUP_I2C_BUS_ID,
msm8960_camera_board_info.board_info,
msm8960_camera_board_info.num_i2c_board_info,
};
#endif
/* Build the matching 'supported_machs' bitmask */
if (machine_is_msm8960_cdp())
mach_mask = I2C_SURF;
else if (machine_is_msm8960_fluid())
mach_mask = I2C_FLUID;
else if (machine_is_msm8960_liquid())
mach_mask = I2C_LIQUID;
else if (machine_is_msm8960_mtp())
mach_mask = I2C_FFA;
else
pr_err("unmatched machine ID in register_i2c_devices\n");
if (machine_is_msm8960_liquid()) {
if (SOCINFO_VERSION_MAJOR(socinfo_get_platform_version()) == 3)
mxt_device_info[0].platform_data =
&mxt_platform_data_3d;
else
mxt_device_info[0].platform_data =
&mxt_platform_data_2d;
}
/* Run the array and install devices as appropriate */
for (i = 0; i < ARRAY_SIZE(msm8960_i2c_devices); ++i) {
if (msm8960_i2c_devices[i].machs & mach_mask)
i2c_register_board_info(msm8960_i2c_devices[i].bus,
msm8960_i2c_devices[i].info,
msm8960_i2c_devices[i].len);
}
if (!mhl_platform_data.gpio_mhl_power)
pr_debug("mhl device configured for ext debug board\n");
#ifdef CONFIG_MSM_CAMERA
if (msm8960_camera_i2c_devices.machs & mach_mask)
i2c_register_board_info(msm8960_camera_i2c_devices.bus,
msm8960_camera_i2c_devices.info,
msm8960_camera_i2c_devices.len);
#endif
#endif
}
static void __init msm8960_tsens_init(void)
{
if (cpu_is_msm8960())
if (SOCINFO_VERSION_MAJOR(socinfo_get_version()) == 1)
return;
msm_tsens_early_init(&msm_tsens_pdata);
}
static void __init msm8960ab_update_krait_spm(void)
{
int i;
/* Update the SPM sequences for SPC and PC */
for (i = 0; i < ARRAY_SIZE(msm_spm_data); i++) {
int j;
struct msm_spm_platform_data *pdata = &msm_spm_data[i];
for (j = 0; j < pdata->num_modes; j++) {
if (pdata->modes[j].cmd ==
spm_power_collapse_without_rpm)
pdata->modes[j].cmd =
spm_power_collapse_without_rpm_krait_v3;
else if (pdata->modes[j].cmd ==
spm_power_collapse_with_rpm)
pdata->modes[j].cmd =
spm_power_collapse_with_rpm_krait_v3;
}
}
}
static void __init msm8960ab_update_retention_spm(void)
{
int i;
/* Update the SPM sequences for krait retention on all cores */
for (i = 0; i < ARRAY_SIZE(msm_spm_data); i++) {
int j;
struct msm_spm_platform_data *pdata = &msm_spm_data[i];
for (j = 0; j < pdata->num_modes; j++) {
if (pdata->modes[j].cmd ==
spm_retention_cmd_sequence)
pdata->modes[j].cmd =
spm_retention_with_krait_v3_cmd_sequence;
}
}
}
static void __init msm8960_cdp_init(void)
{
if (meminfo_init(SYS_MEMORY, SZ_256M) < 0)
pr_err("meminfo_init() failed!\n");
platform_device_register(&msm_gpio_device);
msm8960_tsens_init();
msm_thermal_init(&msm_thermal_pdata);
BUG_ON(msm_rpm_init(&msm8960_rpm_data));
BUG_ON(msm_rpmrs_levels_init(&msm_rpmrs_data));
regulator_suppress_info_printing();
if (msm_xo_init())
pr_err("Failed to initialize XO votes\n");
configure_msm8960_power_grid();
platform_device_register(&msm8960_device_rpm_regulator);
msm_clock_init(&msm8960_clock_init_data);
if (machine_is_msm8960_liquid())
msm_otg_pdata.mhl_enable = true;
msm8960_device_otg.dev.platform_data = &msm_otg_pdata;
if (machine_is_msm8960_mtp() || machine_is_msm8960_fluid() ||
machine_is_msm8960_cdp()) {
/* Due to availability of USB Switch in SGLTE Platform
* it requires different HSUSB PHY settings compare to
* 8960 MTP/CDP platform.
*/
if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_SGLTE)
msm_otg_pdata.phy_init_seq = sglte_phy_init_seq;
else
msm_otg_pdata.phy_init_seq = wr_phy_init_seq;
} else if (machine_is_msm8960_liquid()) {
msm_otg_pdata.phy_init_seq =
liquid_v1_phy_init_seq;
}
android_usb_pdata.swfi_latency =
msm_rpmrs_levels[0].latency_us;
msm_device_hsic_host.dev.platform_data = &msm_hsic_pdata;
if (SOCINFO_VERSION_MAJOR(socinfo_get_version()) >= 2 &&
machine_is_msm8960_liquid())
msm_device_hsic_host.dev.parent = &smsc_hub_device.dev;
msm8960_init_gpiomux();
msm8960_device_qup_spi_gsbi1.dev.platform_data =
&msm8960_qup_spi_gsbi1_pdata;
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
if (socinfo_get_platform_subtype() != PLATFORM_SUBTYPE_SGLTE)
spi_register_board_info(spi_eth_info, ARRAY_SIZE(spi_eth_info));
msm8960_init_pmic();
if (machine_is_msm8960_liquid() || (machine_is_msm8960_mtp() &&
(socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_SGLTE ||
cpu_is_msm8960ab())))
msm_isa1200_board_info[0].platform_data = &isa1200_1_pdata;
msm8960_i2c_init();
msm8960_gfx_init();
if (cpu_is_msm8960ab())
msm8960ab_update_krait_spm();
if (cpu_is_krait_v3()) {
struct msm_pm_init_data_type *pdata =
msm8960_pm_8x60.dev.platform_data;
pdata->retention_calls_tz = false;
msm8960ab_update_retention_spm();
}
platform_device_register(&msm8960_pm_8x60);
msm_spm_init(msm_spm_data, ARRAY_SIZE(msm_spm_data));
msm_spm_l2_init(msm_spm_l2_data);
msm8960_init_buses();
if (cpu_is_msm8960ab()) {
platform_add_devices(msm8960ab_footswitch,
msm8960ab_num_footswitch);
} else {
platform_add_devices(msm8960_footswitch,
msm8960_num_footswitch);
}
if (machine_is_msm8960_liquid())
platform_device_register(&msm8960_device_ext_3p3v_vreg);
if (machine_is_msm8960_cdp())
platform_device_register(&msm8960_device_ext_l2_vreg);
if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_SGLTE)
platform_device_register(&msm8960_device_uart_gsbi8);
else
platform_device_register(&msm8960_device_uart_gsbi5);
/* For 8960 Fusion 2.2 Primary IPC */
if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_SGLTE) {
msm_uart_dm9_pdata.wakeup_irq = gpio_to_irq(94); /* GSBI9(2) */
msm_device_uart_dm9.dev.platform_data = &msm_uart_dm9_pdata;
platform_device_register(&msm_device_uart_dm9);
}
/* For 8960 Standalone External Bluetooth Interface */
if (socinfo_get_platform_subtype() != PLATFORM_SUBTYPE_SGLTE) {
msm_device_uart_dm8.dev.platform_data = &msm_uart_dm8_pdata;
platform_device_register(&msm_device_uart_dm8);
}
if (cpu_is_msm8960ab())
platform_device_register(&msm8960ab_device_acpuclk);
else
platform_device_register(&msm8960_device_acpuclk);
platform_add_devices(common_devices, ARRAY_SIZE(common_devices));
msm8960_add_vidc_device();
msm8960_pm8921_gpio_mpp_init();
/* Don't add modem devices on APQ targets */
if (socinfo_get_id() != 124)
platform_device_register(&msm_8960_q6_mss);
platform_add_devices(cdp_devices, ARRAY_SIZE(cdp_devices));
msm8960_init_smsc_hub();
msm8960_init_hsic();
#ifdef CONFIG_MSM_CAMERA
msm8960_init_cam();
#endif
msm8960_init_mmc();
if (machine_is_msm8960_liquid())
mxt_init_hw_liquid();
register_i2c_devices();
msm8960_init_fb();
slim_register_board_info(msm_slim_devices,
ARRAY_SIZE(msm_slim_devices));
msm8960_init_dsps();
change_memory_power = &msm8960_change_memory_power;
BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata));
bt_power_init();
if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_SGLTE) {
mdm_sglte_device.dev.platform_data = &sglte_platform_data;
platform_device_register(&mdm_sglte_device);
}
ion_adjust_secure_allocation();
}
MACHINE_START(MSM8960_CDP, "QCT MSM8960 CDP")
.map_io = msm8960_map_io,
.reserve = msm8960_reserve,
.init_irq = msm8960_init_irq,
.handle_irq = gic_handle_irq,
.timer = &msm_timer,
.init_machine = msm8960_cdp_init,
.init_early = msm8960_allocate_memory_regions,
.init_very_early = msm8960_early_memory,
.restart = msm_restart,
.smp = &msm8960_smp_ops,
MACHINE_END
MACHINE_START(MSM8960_MTP, "QCT MSM8960 MTP")
.map_io = msm8960_map_io,
.reserve = msm8960_reserve,
.init_irq = msm8960_init_irq,
.handle_irq = gic_handle_irq,
.timer = &msm_timer,
.init_machine = msm8960_cdp_init,
.init_early = msm8960_allocate_memory_regions,
.init_very_early = msm8960_early_memory,
.restart = msm_restart,
.smp = &msm8960_smp_ops,
MACHINE_END
MACHINE_START(MSM8960_FLUID, "QCT MSM8960 FLUID")
.map_io = msm8960_map_io,
.reserve = msm8960_reserve,
.init_irq = msm8960_init_irq,
.handle_irq = gic_handle_irq,
.timer = &msm_timer,
.init_machine = msm8960_cdp_init,
.init_early = msm8960_allocate_memory_regions,
.init_very_early = msm8960_early_memory,
.restart = msm_restart,
.smp = &msm8960_smp_ops,
MACHINE_END
MACHINE_START(MSM8960_LIQUID, "QCT MSM8960 LIQUID")
.map_io = msm8960_map_io,
.reserve = msm8960_reserve,
.init_irq = msm8960_init_irq,
.handle_irq = gic_handle_irq,
.timer = &msm_timer,
.init_machine = msm8960_cdp_init,
.init_early = msm8960_allocate_memory_regions,
.init_very_early = msm8960_early_memory,
.restart = msm_restart,
.smp = &msm8960_smp_ops,
MACHINE_END