[POWERPC] Convert remaining dts-v0 files to v1
At the moment we have a mixture of left-over version 0 and new-format
version 1 files in arch/powerpc/boot/dts. This is potentially
confusing to people new to the dts format attempting to figure it out.
So, this patch converts all the as-yet unconverted dts v0 files and
converts them to v1. They're mechanically-converted, and not hand
tweaked so in some cases they're not 100% in keeping with usual v1
style, but the convertor program does have some heuristics so the
discrepancies aren't too bad.
I have checked that this patch produces no changes to the resulting
dtb binaries.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
diff --git a/arch/powerpc/boot/dts/ep405.dts b/arch/powerpc/boot/dts/ep405.dts
index 9293855..53ef06c 100644
--- a/arch/powerpc/boot/dts/ep405.dts
+++ b/arch/powerpc/boot/dts/ep405.dts
@@ -9,12 +9,14 @@
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "ep405";
compatible = "ep405";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC;
@@ -29,13 +31,13 @@
cpu@0 {
device_type = "cpu";
model = "PowerPC,405GP";
- reg = <0>;
- clock-frequency = <bebc200>; /* Filled in by zImage */
+ reg = <0x00000000>;
+ clock-frequency = <200000000>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <4000>;
- d-cache-size = <4000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <16384>;
+ d-cache-size = <16384>;
dcr-controller;
dcr-access-method = "native";
};
@@ -43,14 +45,14 @@
memory {
device_type = "memory";
- reg = <0 0>; /* Filled in by zImage */
+ reg = <0x00000000 0x00000000>; /* Filled in by zImage */
};
UIC0: interrupt-controller {
compatible = "ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 9>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
@@ -65,91 +67,91 @@
SDRAM0: memory-controller {
compatible = "ibm,sdram-405gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
MAL: mcmal {
compatible = "ibm,mcmal-405gp", "ibm,mcmal";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <1>;
num-rx-chans = <1>;
interrupt-parent = <&UIC0>;
interrupts = <
- b 4 /* TXEOB */
- c 4 /* RXEOB */
- a 4 /* SERR */
- d 4 /* TXDE */
- e 4 /* RXDE */>;
+ 0xb 0x4 /* TXEOB */
+ 0xc 0x4 /* RXEOB */
+ 0xa 0x4 /* SERR */
+ 0xd 0x4 /* TXDE */
+ 0xe 0x4 /* RXDE */>;
};
POB0: opb {
compatible = "ibm,opb-405gp", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <ef600000 ef600000 a00000>;
- dcr-reg = <0a0 5>;
+ ranges = <0xef600000 0xef600000 0x00a00000>;
+ dcr-reg = <0x0a0 0x005>;
clock-frequency = <0>; /* Filled in by zImage */
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <2580>;
+ current-speed = <9600>;
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600400 8>;
- virtual-reg = <ef600400>;
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <2580>;
+ current-speed = <9600>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
IIC: i2c@ef600500 {
compatible = "ibm,iic-405gp", "ibm,iic";
- reg = <ef600500 11>;
+ reg = <0xef600500 0x00000011>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
GPIO: gpio@ef600700 {
compatible = "ibm,gpio-405gp";
- reg = <ef600700 20>;
+ reg = <0xef600700 0x00000020>;
};
EMAC: ethernet@ef600800 {
- linux,network-index = <0>;
+ linux,network-index = <0x0>;
device_type = "network";
compatible = "ibm,emac-405gp", "ibm,emac";
interrupt-parent = <&UIC0>;
interrupts = <
- f 4 /* Ethernet */
- 9 4 /* Ethernet Wake Up */>;
+ 0xf 0x4 /* Ethernet */
+ 0x9 0x4 /* Ethernet Wake Up */>;
local-mac-address = [000000000000]; /* Filled in by zImage */
- reg = <ef600800 70>;
+ reg = <0xef600800 0x00000070>;
mal-device = <&MAL>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
};
};
EBC0: ebc {
compatible = "ibm,ebc-405gp", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
@@ -163,13 +165,13 @@
/* NVRAM and RTC */
nvrtc@4,200000 {
compatible = "ds1742";
- reg = <4 200000 0>; /* size fixed up by zImage */
+ reg = <0x00000004 0x00200000 0x00000000>; /* size fixed up by zImage */
};
/* "BCSR" CPLD contains a PCI irq controller */
bcsr@4,0 {
compatible = "ep405-bcsr";
- reg = <4 0 10>;
+ reg = <0x00000004 0x00000000 0x00000010>;
interrupt-controller;
/* Routing table */
irq-routing = [ 00 /* SYSERR */
@@ -198,26 +200,26 @@
#address-cells = <3>;
compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
primary;
- reg = <eec00000 8 /* Config space access */
- eed80000 4 /* IACK */
- eed80000 4 /* Special cycle */
- ef480000 40>; /* Internal registers */
+ reg = <0xeec00000 0x00000008 /* Config space access */
+ 0xeed80000 0x00000004 /* IACK */
+ 0xeed80000 0x00000004 /* Special cycle */
+ 0xef480000 0x00000040>; /* Internal registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed. Chip supports a second
* IO range but we don't use it for now
*/
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e8000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+ 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
/* That's all I know about IRQs on that thing ... */
- interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
interrupt-map = <
/* USB */
- 7000 0 0 0 &UIC0 1e 8 /* IRQ5 */
+ 0x7000 0x0 0x0 0x0 &UIC0 0x1e 0x8 /* IRQ5 */
>;
};
};