| /* |
| * linux/arch/arm/plat-mxc/time.c |
| * |
| * Copyright (C) 2000-2001 Deep Blue Solutions |
| * Copyright (C) 2002 Shane Nay (shane@minirl.com) |
| * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) |
| * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, |
| * MA 02110-1301, USA. |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/clockchips.h> |
| #include <linux/clk.h> |
| |
| #include <mach/hardware.h> |
| #include <asm/sched_clock.h> |
| #include <asm/mach/time.h> |
| #include <mach/common.h> |
| |
| /* |
| * There are 2 versions of the timer hardware on Freescale MXC hardware. |
| * Version 1: MX1/MXL, MX21, MX27. |
| * Version 2: MX25, MX31, MX35, MX37, MX51 |
| */ |
| |
| /* defines common for all i.MX */ |
| #define MXC_TCTL 0x00 |
| #define MXC_TCTL_TEN (1 << 0) /* Enable module */ |
| #define MXC_TPRER 0x04 |
| |
| /* MX1, MX21, MX27 */ |
| #define MX1_2_TCTL_CLK_PCLK1 (1 << 1) |
| #define MX1_2_TCTL_IRQEN (1 << 4) |
| #define MX1_2_TCTL_FRR (1 << 8) |
| #define MX1_2_TCMP 0x08 |
| #define MX1_2_TCN 0x10 |
| #define MX1_2_TSTAT 0x14 |
| |
| /* MX21, MX27 */ |
| #define MX2_TSTAT_CAPT (1 << 1) |
| #define MX2_TSTAT_COMP (1 << 0) |
| |
| /* MX31, MX35, MX25, MX5 */ |
| #define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */ |
| #define V2_TCTL_CLK_IPG (1 << 6) |
| #define V2_TCTL_FRR (1 << 9) |
| #define V2_IR 0x0c |
| #define V2_TSTAT 0x08 |
| #define V2_TSTAT_OF1 (1 << 0) |
| #define V2_TCN 0x24 |
| #define V2_TCMP 0x10 |
| |
| #define timer_is_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27()) |
| #define timer_is_v2() (!timer_is_v1()) |
| |
| static struct clock_event_device clockevent_mxc; |
| static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; |
| |
| static void __iomem *timer_base; |
| |
| static inline void gpt_irq_disable(void) |
| { |
| unsigned int tmp; |
| |
| if (timer_is_v2()) |
| __raw_writel(0, timer_base + V2_IR); |
| else { |
| tmp = __raw_readl(timer_base + MXC_TCTL); |
| __raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL); |
| } |
| } |
| |
| static inline void gpt_irq_enable(void) |
| { |
| if (timer_is_v2()) |
| __raw_writel(1<<0, timer_base + V2_IR); |
| else { |
| __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN, |
| timer_base + MXC_TCTL); |
| } |
| } |
| |
| static void gpt_irq_acknowledge(void) |
| { |
| if (timer_is_v1()) { |
| if (cpu_is_mx1()) |
| __raw_writel(0, timer_base + MX1_2_TSTAT); |
| else |
| __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, |
| timer_base + MX1_2_TSTAT); |
| } else if (timer_is_v2()) |
| __raw_writel(V2_TSTAT_OF1, timer_base + V2_TSTAT); |
| } |
| |
| static void __iomem *sched_clock_reg; |
| |
| static u32 notrace mxc_read_sched_clock(void) |
| { |
| return sched_clock_reg ? __raw_readl(sched_clock_reg) : 0; |
| } |
| |
| static int __init mxc_clocksource_init(struct clk *timer_clk) |
| { |
| unsigned int c = clk_get_rate(timer_clk); |
| void __iomem *reg = timer_base + (timer_is_v2() ? V2_TCN : MX1_2_TCN); |
| |
| sched_clock_reg = reg; |
| |
| setup_sched_clock(mxc_read_sched_clock, 32, c); |
| return clocksource_mmio_init(reg, "mxc_timer1", c, 200, 32, |
| clocksource_mmio_readl_up); |
| } |
| |
| /* clock event */ |
| |
| static int mx1_2_set_next_event(unsigned long evt, |
| struct clock_event_device *unused) |
| { |
| unsigned long tcmp; |
| |
| tcmp = __raw_readl(timer_base + MX1_2_TCN) + evt; |
| |
| __raw_writel(tcmp, timer_base + MX1_2_TCMP); |
| |
| return (int)(tcmp - __raw_readl(timer_base + MX1_2_TCN)) < 0 ? |
| -ETIME : 0; |
| } |
| |
| static int v2_set_next_event(unsigned long evt, |
| struct clock_event_device *unused) |
| { |
| unsigned long tcmp; |
| |
| tcmp = __raw_readl(timer_base + V2_TCN) + evt; |
| |
| __raw_writel(tcmp, timer_base + V2_TCMP); |
| |
| return (int)(tcmp - __raw_readl(timer_base + V2_TCN)) < 0 ? |
| -ETIME : 0; |
| } |
| |
| #ifdef DEBUG |
| static const char *clock_event_mode_label[] = { |
| [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC", |
| [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT", |
| [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN", |
| [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED" |
| }; |
| #endif /* DEBUG */ |
| |
| static void mxc_set_mode(enum clock_event_mode mode, |
| struct clock_event_device *evt) |
| { |
| unsigned long flags; |
| |
| /* |
| * The timer interrupt generation is disabled at least |
| * for enough time to call mxc_set_next_event() |
| */ |
| local_irq_save(flags); |
| |
| /* Disable interrupt in GPT module */ |
| gpt_irq_disable(); |
| |
| if (mode != clockevent_mode) { |
| /* Set event time into far-far future */ |
| if (timer_is_v2()) |
| __raw_writel(__raw_readl(timer_base + V2_TCN) - 3, |
| timer_base + V2_TCMP); |
| else |
| __raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3, |
| timer_base + MX1_2_TCMP); |
| |
| /* Clear pending interrupt */ |
| gpt_irq_acknowledge(); |
| } |
| |
| #ifdef DEBUG |
| printk(KERN_INFO "mxc_set_mode: changing mode from %s to %s\n", |
| clock_event_mode_label[clockevent_mode], |
| clock_event_mode_label[mode]); |
| #endif /* DEBUG */ |
| |
| /* Remember timer mode */ |
| clockevent_mode = mode; |
| local_irq_restore(flags); |
| |
| switch (mode) { |
| case CLOCK_EVT_MODE_PERIODIC: |
| printk(KERN_ERR"mxc_set_mode: Periodic mode is not " |
| "supported for i.MX\n"); |
| break; |
| case CLOCK_EVT_MODE_ONESHOT: |
| /* |
| * Do not put overhead of interrupt enable/disable into |
| * mxc_set_next_event(), the core has about 4 minutes |
| * to call mxc_set_next_event() or shutdown clock after |
| * mode switching |
| */ |
| local_irq_save(flags); |
| gpt_irq_enable(); |
| local_irq_restore(flags); |
| break; |
| case CLOCK_EVT_MODE_SHUTDOWN: |
| case CLOCK_EVT_MODE_UNUSED: |
| case CLOCK_EVT_MODE_RESUME: |
| /* Left event sources disabled, no more interrupts appear */ |
| break; |
| } |
| } |
| |
| /* |
| * IRQ handler for the timer |
| */ |
| static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) |
| { |
| struct clock_event_device *evt = &clockevent_mxc; |
| uint32_t tstat; |
| |
| if (timer_is_v2()) |
| tstat = __raw_readl(timer_base + V2_TSTAT); |
| else |
| tstat = __raw_readl(timer_base + MX1_2_TSTAT); |
| |
| gpt_irq_acknowledge(); |
| |
| evt->event_handler(evt); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction mxc_timer_irq = { |
| .name = "i.MX Timer Tick", |
| .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, |
| .handler = mxc_timer_interrupt, |
| }; |
| |
| static struct clock_event_device clockevent_mxc = { |
| .name = "mxc_timer1", |
| .features = CLOCK_EVT_FEAT_ONESHOT, |
| .shift = 32, |
| .set_mode = mxc_set_mode, |
| .set_next_event = mx1_2_set_next_event, |
| .rating = 200, |
| }; |
| |
| static int __init mxc_clockevent_init(struct clk *timer_clk) |
| { |
| unsigned int c = clk_get_rate(timer_clk); |
| |
| if (timer_is_v2()) |
| clockevent_mxc.set_next_event = v2_set_next_event; |
| |
| clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC, |
| clockevent_mxc.shift); |
| clockevent_mxc.max_delta_ns = |
| clockevent_delta2ns(0xfffffffe, &clockevent_mxc); |
| clockevent_mxc.min_delta_ns = |
| clockevent_delta2ns(0xff, &clockevent_mxc); |
| |
| clockevent_mxc.cpumask = cpumask_of(0); |
| |
| clockevents_register_device(&clockevent_mxc); |
| |
| return 0; |
| } |
| |
| void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq) |
| { |
| uint32_t tctl_val; |
| |
| clk_prepare_enable(timer_clk); |
| |
| timer_base = base; |
| |
| /* |
| * Initialise to a known state (all timers off, and timing reset) |
| */ |
| |
| __raw_writel(0, timer_base + MXC_TCTL); |
| __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */ |
| |
| if (timer_is_v2()) |
| tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; |
| else |
| tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN; |
| |
| __raw_writel(tctl_val, timer_base + MXC_TCTL); |
| |
| /* init and register the timer to the framework */ |
| mxc_clocksource_init(timer_clk); |
| mxc_clockevent_init(timer_clk); |
| |
| /* Make irqs happen */ |
| setup_irq(irq, &mxc_timer_irq); |
| } |