OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
The OMAP powerdomain code and data is all OMAP2+-specific. This seems
unlikely to change any time soon. Move plat-omap/include/plat/powerdomain.h
to mach-omap2/powerdomain.h. The primary point of doing this is to remove
the temptation for unrelated upper-layer code to access powerdomain code
and data directly.
As part of this process, remove the references to powerdomain data
from the GPIO "driver" and the OMAP PM no-op layer, both in plat-omap.
Change the DSPBridge code to point to the new location for the
powerdomain headers. The DSPBridge code should not be including the
powerdomain headers; these should be removed.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 41ff2f8..d6f9fa0 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -82,7 +82,7 @@
/* TODO: Analyze removing gpio_bank_count usage from driver code */
extern int gpio_bank_count;
-extern void omap2_gpio_prepare_for_idle(int power_state);
+extern void omap2_gpio_prepare_for_idle(int off_mode);
extern void omap2_gpio_resume_after_idle(void);
extern void omap_set_gpio_debounce(int gpio, int enable);
extern void omap_set_gpio_debounce_time(int gpio, int enable);
diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h
index 62c3fe9..47d6110 100644
--- a/arch/arm/plat-omap/include/plat/omap-pm.h
+++ b/arch/arm/plat-omap/include/plat/omap-pm.h
@@ -19,8 +19,6 @@
#include <linux/clk.h>
#include <linux/opp.h>
-#include "powerdomain.h"
-
/*
* agent_id values for use with omap_pm_set_min_bus_tput():
*
diff --git a/arch/arm/plat-omap/include/plat/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h
deleted file mode 100644
index a0d3a30..0000000
--- a/arch/arm/plat-omap/include/plat/powerdomain.h
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * OMAP2/3/4 powerdomain control
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX This should be moved to the mach-omap2/ directory at the earliest
- * opportunity.
- */
-
-#ifndef ASM_ARM_PLAT_OMAP_INCLUDE_PLAT_POWERDOMAIN
-#define ASM_ARM_PLAT_OMAP_INCLUDE_PLAT_POWERDOMAIN
-
-#include <linux/types.h>
-#include <linux/list.h>
-
-#include <asm/atomic.h>
-
-#include <plat/cpu.h>
-
-/* Powerdomain basic power states */
-#define PWRDM_POWER_OFF 0x0
-#define PWRDM_POWER_RET 0x1
-#define PWRDM_POWER_INACTIVE 0x2
-#define PWRDM_POWER_ON 0x3
-
-#define PWRDM_MAX_PWRSTS 4
-
-/* Powerdomain allowable state bitfields */
-#define PWRSTS_ON (1 << PWRDM_POWER_ON)
-#define PWRSTS_OFF (1 << PWRDM_POWER_OFF)
-#define PWRSTS_OFF_ON ((1 << PWRDM_POWER_OFF) | \
- (1 << PWRDM_POWER_ON))
-
-#define PWRSTS_OFF_RET ((1 << PWRDM_POWER_OFF) | \
- (1 << PWRDM_POWER_RET))
-
-#define PWRSTS_RET_ON ((1 << PWRDM_POWER_RET) | \
- (1 << PWRDM_POWER_ON))
-
-#define PWRSTS_OFF_RET_ON (PWRSTS_OFF_RET | (1 << PWRDM_POWER_ON))
-
-
-/* Powerdomain flags */
-#define PWRDM_HAS_HDWR_SAR (1 << 0) /* hardware save-and-restore support */
-#define PWRDM_HAS_MPU_QUIRK (1 << 1) /* MPU pwr domain has MEM bank 0 bits
- * in MEM bank 1 position. This is
- * true for OMAP3430
- */
-#define PWRDM_HAS_LOWPOWERSTATECHANGE (1 << 2) /*
- * support to transition from a
- * sleep state to a lower sleep
- * state without waking up the
- * powerdomain
- */
-
-/*
- * Number of memory banks that are power-controllable. On OMAP4430, the
- * maximum is 5.
- */
-#define PWRDM_MAX_MEM_BANKS 5
-
-/*
- * Maximum number of clockdomains that can be associated with a powerdomain.
- * CORE powerdomain on OMAP4 is the worst case
- */
-#define PWRDM_MAX_CLKDMS 9
-
-/* XXX A completely arbitrary number. What is reasonable here? */
-#define PWRDM_TRANSITION_BAILOUT 100000
-
-struct clockdomain;
-struct powerdomain;
-
-/**
- * struct powerdomain - OMAP powerdomain
- * @name: Powerdomain name
- * @omap_chip: represents the OMAP chip types containing this pwrdm
- * @prcm_offs: the address offset from CM_BASE/PRM_BASE
- * @prcm_partition: (OMAP4 only) the PRCM partition ID containing @prcm_offs
- * @pwrsts: Possible powerdomain power states
- * @pwrsts_logic_ret: Possible logic power states when pwrdm in RETENTION
- * @flags: Powerdomain flags
- * @banks: Number of software-controllable memory banks in this powerdomain
- * @pwrsts_mem_ret: Possible memory bank pwrstates when pwrdm in RETENTION
- * @pwrsts_mem_on: Possible memory bank pwrstates when pwrdm in ON
- * @pwrdm_clkdms: Clockdomains in this powerdomain
- * @node: list_head linking all powerdomains
- * @state:
- * @state_counter:
- * @timer:
- * @state_timer:
- *
- * @prcm_partition possible values are defined in mach-omap2/prcm44xx.h.
- */
-struct powerdomain {
- const char *name;
- const struct omap_chip_id omap_chip;
- const s16 prcm_offs;
- const u8 pwrsts;
- const u8 pwrsts_logic_ret;
- const u8 flags;
- const u8 banks;
- const u8 pwrsts_mem_ret[PWRDM_MAX_MEM_BANKS];
- const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS];
- const u8 prcm_partition;
- struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS];
- struct list_head node;
- int state;
- unsigned state_counter[PWRDM_MAX_PWRSTS];
- unsigned ret_logic_off_counter;
- unsigned ret_mem_off_counter[PWRDM_MAX_MEM_BANKS];
-
-#ifdef CONFIG_PM_DEBUG
- s64 timer;
- s64 state_timer[PWRDM_MAX_PWRSTS];
-#endif
-};
-
-/**
- * struct pwrdm_ops - Arch specfic function implementations
- * @pwrdm_set_next_pwrst: Set the target power state for a pd
- * @pwrdm_read_next_pwrst: Read the target power state set for a pd
- * @pwrdm_read_pwrst: Read the current power state of a pd
- * @pwrdm_read_prev_pwrst: Read the prev power state entered by the pd
- * @pwrdm_set_logic_retst: Set the logic state in RET for a pd
- * @pwrdm_set_mem_onst: Set the Memory state in ON for a pd
- * @pwrdm_set_mem_retst: Set the Memory state in RET for a pd
- * @pwrdm_read_logic_pwrst: Read the current logic state of a pd
- * @pwrdm_read_prev_logic_pwrst: Read the previous logic state entered by a pd
- * @pwrdm_read_logic_retst: Read the logic state in RET for a pd
- * @pwrdm_read_mem_pwrst: Read the current memory state of a pd
- * @pwrdm_read_prev_mem_pwrst: Read the previous memory state entered by a pd
- * @pwrdm_read_mem_retst: Read the memory state in RET for a pd
- * @pwrdm_clear_all_prev_pwrst: Clear all previous power states logged for a pd
- * @pwrdm_enable_hdwr_sar: Enable Hardware Save-Restore feature for the pd
- * @pwrdm_disable_hdwr_sar: Disable Hardware Save-Restore feature for a pd
- * @pwrdm_set_lowpwrstchange: Enable pd transitions from a shallow to deep sleep
- * @pwrdm_wait_transition: Wait for a pd state transition to complete
- */
-struct pwrdm_ops {
- int (*pwrdm_set_next_pwrst)(struct powerdomain *pwrdm, u8 pwrst);
- int (*pwrdm_read_next_pwrst)(struct powerdomain *pwrdm);
- int (*pwrdm_read_pwrst)(struct powerdomain *pwrdm);
- int (*pwrdm_read_prev_pwrst)(struct powerdomain *pwrdm);
- int (*pwrdm_set_logic_retst)(struct powerdomain *pwrdm, u8 pwrst);
- int (*pwrdm_set_mem_onst)(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
- int (*pwrdm_set_mem_retst)(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
- int (*pwrdm_read_logic_pwrst)(struct powerdomain *pwrdm);
- int (*pwrdm_read_prev_logic_pwrst)(struct powerdomain *pwrdm);
- int (*pwrdm_read_logic_retst)(struct powerdomain *pwrdm);
- int (*pwrdm_read_mem_pwrst)(struct powerdomain *pwrdm, u8 bank);
- int (*pwrdm_read_prev_mem_pwrst)(struct powerdomain *pwrdm, u8 bank);
- int (*pwrdm_read_mem_retst)(struct powerdomain *pwrdm, u8 bank);
- int (*pwrdm_clear_all_prev_pwrst)(struct powerdomain *pwrdm);
- int (*pwrdm_enable_hdwr_sar)(struct powerdomain *pwrdm);
- int (*pwrdm_disable_hdwr_sar)(struct powerdomain *pwrdm);
- int (*pwrdm_set_lowpwrstchange)(struct powerdomain *pwrdm);
- int (*pwrdm_wait_transition)(struct powerdomain *pwrdm);
-};
-
-void pwrdm_fw_init(void);
-void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs);
-
-struct powerdomain *pwrdm_lookup(const char *name);
-
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
- void *user);
-int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
- void *user);
-
-int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
-int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
-int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
- int (*fn)(struct powerdomain *pwrdm,
- struct clockdomain *clkdm));
-
-int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
-
-int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
-int pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm);
-int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm);
-
-int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst);
-int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
-int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
-
-int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_logic_retst(struct powerdomain *pwrdm);
-int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
-int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
-int pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank);
-
-int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm);
-int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm);
-bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
-
-int pwrdm_wait_transition(struct powerdomain *pwrdm);
-
-int pwrdm_state_switch(struct powerdomain *pwrdm);
-int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
-int pwrdm_pre_transition(void);
-int pwrdm_post_transition(void);
-int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
-
-extern void omap2xxx_powerdomains_init(void);
-extern void omap3xxx_powerdomains_init(void);
-extern void omap44xx_powerdomains_init(void);
-
-#endif