[MMC] Add OMAP MMC host driver
Adds OMAP MMC driver.
Signed-off-by: Juha Yrjölä <juha.yrjola@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Carlos Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 3f5d77f..7cc162e 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -60,6 +60,17 @@
If unsure, say N.
+config MMC_OMAP
+ tristate "TI OMAP Multimedia Card Interface support"
+ depends on ARCH_OMAP && MMC
+ select TPS65010 if MACH_OMAP_H2
+ help
+ This selects the TI OMAP Multimedia card Interface.
+ If you have an OMAP board with a Multimedia Card slot,
+ say Y or M here.
+
+ If unsure, say N.
+
config MMC_WBSD
tristate "Winbond W83L51xD SD/MMC Card Interface support"
depends on MMC && ISA_DMA_API
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 769d545..0b0920a 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -20,5 +20,6 @@
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
+obj-$(CONFIG_MMC_OMAP) += omap.o
mmc_core-y := mmc.o mmc_queue.o mmc_sysfs.o
diff --git a/drivers/mmc/omap.c b/drivers/mmc/omap.c
new file mode 100644
index 0000000..49fb2ea
--- /dev/null
+++ b/drivers/mmc/omap.c
@@ -0,0 +1,1231 @@
+/*
+ * linux/drivers/media/mmc/omap.c
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Written by Tuukka Tikkanen and Juha Yrjölä<juha.yrjola@nokia.com>
+ * Misc hacks here and there by Tony Lindgren <tony@atomide.com>
+ * Other hacks (DMA, SD, etc) by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+
+#ifdef CONFIG_MMC_DEBUG
+#define DEBUG /* for dev_dbg(), pr_debug(), etc */
+#endif
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/protocol.h>
+#include <linux/mmc/card.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/scatterlist.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/fpga.h>
+#include <asm/arch/tps65010.h>
+
+#include "omap.h"
+
+#define DRIVER_NAME "mmci-omap"
+#define RSP_TYPE(x) ((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
+
+/* Specifies how often in millisecs to poll for card status changes
+ * when the cover switch is open */
+#define OMAP_MMC_SWITCH_POLL_DELAY 500
+
+static int mmc_omap_enable_poll = 1;
+
+struct mmc_omap_host {
+ int initialized;
+ int suspended;
+ struct mmc_request * mrq;
+ struct mmc_command * cmd;
+ struct mmc_data * data;
+ struct mmc_host * mmc;
+ struct device * dev;
+ unsigned char id; /* 16xx chips have 2 MMC blocks */
+ struct clk * iclk;
+ struct clk * fclk;
+ void __iomem *base;
+ int irq;
+ unsigned char bus_mode;
+ unsigned char hw_bus_mode;
+
+ unsigned int sg_len;
+ int sg_idx;
+ u16 * buffer;
+ u32 buffer_bytes_left;
+ u32 total_bytes_left;
+
+ unsigned use_dma:1;
+ unsigned brs_received:1, dma_done:1;
+ unsigned dma_is_read:1;
+ unsigned dma_in_use:1;
+ int dma_ch;
+ spinlock_t dma_lock;
+ struct timer_list dma_timer;
+ unsigned dma_len;
+
+ short power_pin;
+ short wp_pin;
+
+ int switch_pin;
+ struct work_struct switch_work;
+ struct timer_list switch_timer;
+ int switch_last_state;
+};
+
+static inline int
+mmc_omap_cover_is_open(struct mmc_omap_host *host)
+{
+ if (host->switch_pin < 0)
+ return 0;
+ return omap_get_gpio_datain(host->switch_pin);
+}
+
+static ssize_t
+mmc_omap_show_cover_switch(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mmc_omap_host *host = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", mmc_omap_cover_is_open(host) ? "open" :
+ "closed");
+}
+
+static DEVICE_ATTR(cover_switch, S_IRUGO, mmc_omap_show_cover_switch, NULL);
+
+static ssize_t
+mmc_omap_show_enable_poll(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", mmc_omap_enable_poll);
+}
+
+static ssize_t
+mmc_omap_store_enable_poll(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t size)
+{
+ int enable_poll;
+
+ if (sscanf(buf, "%10d", &enable_poll) != 1)
+ return -EINVAL;
+
+ if (enable_poll != mmc_omap_enable_poll) {
+ struct mmc_omap_host *host = dev_get_drvdata(dev);
+
+ mmc_omap_enable_poll = enable_poll;
+ if (enable_poll && host->switch_pin >= 0)
+ schedule_work(&host->switch_work);
+ }
+ return size;
+}
+
+static DEVICE_ATTR(enable_poll, 0664,
+ mmc_omap_show_enable_poll, mmc_omap_store_enable_poll);
+
+static void
+mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd)
+{
+ u32 cmdreg;
+ u32 resptype;
+ u32 cmdtype;
+
+ host->cmd = cmd;
+
+ resptype = 0;
+ cmdtype = 0;
+
+ /* Our hardware needs to know exact type */
+ switch (RSP_TYPE(mmc_resp_type(cmd))) {
+ case RSP_TYPE(MMC_RSP_R1):
+ /* resp 1, resp 1b */
+ resptype = 1;
+ break;
+ case RSP_TYPE(MMC_RSP_R2):
+ resptype = 2;
+ break;
+ case RSP_TYPE(MMC_RSP_R3):
+ resptype = 3;
+ break;
+ default:
+ break;
+ }
+
+ if (mmc_cmd_type(cmd) == MMC_CMD_ADTC) {
+ cmdtype = OMAP_MMC_CMDTYPE_ADTC;
+ } else if (mmc_cmd_type(cmd) == MMC_CMD_BC) {
+ cmdtype = OMAP_MMC_CMDTYPE_BC;
+ } else if (mmc_cmd_type(cmd) == MMC_CMD_BCR) {
+ cmdtype = OMAP_MMC_CMDTYPE_BCR;
+ } else {
+ cmdtype = OMAP_MMC_CMDTYPE_AC;
+ }
+
+ cmdreg = cmd->opcode | (resptype << 8) | (cmdtype << 12);
+
+ if (host->bus_mode == MMC_BUSMODE_OPENDRAIN)
+ cmdreg |= 1 << 6;
+
+ if (cmd->flags & MMC_RSP_BUSY)
+ cmdreg |= 1 << 11;
+
+ if (host->data && !(host->data->flags & MMC_DATA_WRITE))
+ cmdreg |= 1 << 15;
+
+ clk_enable(host->fclk);
+
+ OMAP_MMC_WRITE(host->base, CTO, 200);
+ OMAP_MMC_WRITE(host->base, ARGL, cmd->arg & 0xffff);
+ OMAP_MMC_WRITE(host->base, ARGH, cmd->arg >> 16);
+ OMAP_MMC_WRITE(host->base, IE,
+ OMAP_MMC_STAT_A_EMPTY | OMAP_MMC_STAT_A_FULL |
+ OMAP_MMC_STAT_CMD_CRC | OMAP_MMC_STAT_CMD_TOUT |
+ OMAP_MMC_STAT_DATA_CRC | OMAP_MMC_STAT_DATA_TOUT |
+ OMAP_MMC_STAT_END_OF_CMD | OMAP_MMC_STAT_CARD_ERR |
+ OMAP_MMC_STAT_END_OF_DATA);
+ OMAP_MMC_WRITE(host->base, CMD, cmdreg);
+}
+
+static void
+mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
+{
+ if (host->dma_in_use) {
+ enum dma_data_direction dma_data_dir;
+
+ BUG_ON(host->dma_ch < 0);
+ if (data->error != MMC_ERR_NONE)
+ omap_stop_dma(host->dma_ch);
+ /* Release DMA channel lazily */
+ mod_timer(&host->dma_timer, jiffies + HZ);
+ if (data->flags & MMC_DATA_WRITE)
+ dma_data_dir = DMA_TO_DEVICE;
+ else
+ dma_data_dir = DMA_FROM_DEVICE;
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->sg_len,
+ dma_data_dir);
+ }
+ host->data = NULL;
+ host->sg_len = 0;
+ clk_disable(host->fclk);
+
+ /* NOTE: MMC layer will sometimes poll-wait CMD13 next, issuing
+ * dozens of requests until the card finishes writing data.
+ * It'd be cheaper to just wait till an EOFB interrupt arrives...
+ */
+
+ if (!data->stop) {
+ host->mrq = NULL;
+ mmc_request_done(host->mmc, data->mrq);
+ return;
+ }
+
+ mmc_omap_start_command(host, data->stop);
+}
+
+static void
+mmc_omap_end_of_data(struct mmc_omap_host *host, struct mmc_data *data)
+{
+ unsigned long flags;
+ int done;
+
+ if (!host->dma_in_use) {
+ mmc_omap_xfer_done(host, data);
+ return;
+ }
+ done = 0;
+ spin_lock_irqsave(&host->dma_lock, flags);
+ if (host->dma_done)
+ done = 1;
+ else
+ host->brs_received = 1;
+ spin_unlock_irqrestore(&host->dma_lock, flags);
+ if (done)
+ mmc_omap_xfer_done(host, data);
+}
+
+static void
+mmc_omap_dma_timer(unsigned long data)
+{
+ struct mmc_omap_host *host = (struct mmc_omap_host *) data;
+
+ BUG_ON(host->dma_ch < 0);
+ omap_free_dma(host->dma_ch);
+ host->dma_ch = -1;
+}
+
+static void
+mmc_omap_dma_done(struct mmc_omap_host *host, struct mmc_data *data)
+{
+ unsigned long flags;
+ int done;
+
+ done = 0;
+ spin_lock_irqsave(&host->dma_lock, flags);
+ if (host->brs_received)
+ done = 1;
+ else
+ host->dma_done = 1;
+ spin_unlock_irqrestore(&host->dma_lock, flags);
+ if (done)
+ mmc_omap_xfer_done(host, data);
+}
+
+static void
+mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
+{
+ host->cmd = NULL;
+
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ if (cmd->flags & MMC_RSP_136) {
+ /* response type 2 */
+ cmd->resp[3] =
+ OMAP_MMC_READ(host->base, RSP0) |
+ (OMAP_MMC_READ(host->base, RSP1) << 16);
+ cmd->resp[2] =
+ OMAP_MMC_READ(host->base, RSP2) |
+ (OMAP_MMC_READ(host->base, RSP3) << 16);
+ cmd->resp[1] =
+ OMAP_MMC_READ(host->base, RSP4) |
+ (OMAP_MMC_READ(host->base, RSP5) << 16);
+ cmd->resp[0] =
+ OMAP_MMC_READ(host->base, RSP6) |
+ (OMAP_MMC_READ(host->base, RSP7) << 16);
+ } else {
+ /* response types 1, 1b, 3, 4, 5, 6 */
+ cmd->resp[0] =
+ OMAP_MMC_READ(host->base, RSP6) |
+ (OMAP_MMC_READ(host->base, RSP7) << 16);
+ }
+ }
+
+ if (host->data == NULL || cmd->error != MMC_ERR_NONE) {
+ host->mrq = NULL;
+ clk_disable(host->fclk);
+ mmc_request_done(host->mmc, cmd->mrq);
+ }
+}
+
+/* PIO only */
+static void
+mmc_omap_sg_to_buf(struct mmc_omap_host *host)
+{
+ struct scatterlist *sg;
+
+ sg = host->data->sg + host->sg_idx;
+ host->buffer_bytes_left = sg->length;
+ host->buffer = page_address(sg->page) + sg->offset;
+ if (host->buffer_bytes_left > host->total_bytes_left)
+ host->buffer_bytes_left = host->total_bytes_left;
+}
+
+/* PIO only */
+static void
+mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
+{
+ int n;
+ void __iomem *reg;
+ u16 *p;
+
+ if (host->buffer_bytes_left == 0) {
+ host->sg_idx++;
+ BUG_ON(host->sg_idx == host->sg_len);
+ mmc_omap_sg_to_buf(host);
+ }
+ n = 64;
+ if (n > host->buffer_bytes_left)
+ n = host->buffer_bytes_left;
+ host->buffer_bytes_left -= n;
+ host->total_bytes_left -= n;
+ host->data->bytes_xfered += n;
+
+ if (write) {
+ __raw_writesw(host->base + OMAP_MMC_REG_DATA, host->buffer, n);
+ } else {
+ __raw_readsw(host->base + OMAP_MMC_REG_DATA, host->buffer, n);
+ }
+}
+
+static inline void mmc_omap_report_irq(u16 status)
+{
+ static const char *mmc_omap_status_bits[] = {
+ "EOC", "CD", "CB", "BRS", "EOFB", "DTO", "DCRC", "CTO",
+ "CCRC", "CRW", "AF", "AE", "OCRB", "CIRQ", "CERR"
+ };
+ int i, c = 0;
+
+ for (i = 0; i < ARRAY_SIZE(mmc_omap_status_bits); i++)
+ if (status & (1 << i)) {
+ if (c)
+ printk(" ");
+ printk("%s", mmc_omap_status_bits[i]);
+ c++;
+ }
+}
+
+static irqreturn_t mmc_omap_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct mmc_omap_host * host = (struct mmc_omap_host *)dev_id;
+ u16 status;
+ int end_command;
+ int end_transfer;
+ int transfer_error;
+
+ if (host->cmd == NULL && host->data == NULL) {
+ status = OMAP_MMC_READ(host->base, STAT);
+ dev_info(mmc_dev(host->mmc),"spurious irq 0x%04x\n", status);
+ if (status != 0) {
+ OMAP_MMC_WRITE(host->base, STAT, status);
+ OMAP_MMC_WRITE(host->base, IE, 0);
+ }
+ return IRQ_HANDLED;
+ }
+
+ end_command = 0;
+ end_transfer = 0;
+ transfer_error = 0;
+
+ while ((status = OMAP_MMC_READ(host->base, STAT)) != 0) {
+ OMAP_MMC_WRITE(host->base, STAT, status);
+#ifdef CONFIG_MMC_DEBUG
+ dev_dbg(mmc_dev(host->mmc), "MMC IRQ %04x (CMD %d): ",
+ status, host->cmd != NULL ? host->cmd->opcode : -1);
+ mmc_omap_report_irq(status);
+ printk("\n");
+#endif
+ if (host->total_bytes_left) {
+ if ((status & OMAP_MMC_STAT_A_FULL) ||
+ (status & OMAP_MMC_STAT_END_OF_DATA))
+ mmc_omap_xfer_data(host, 0);
+ if (status & OMAP_MMC_STAT_A_EMPTY)
+ mmc_omap_xfer_data(host, 1);
+ }
+
+ if (status & OMAP_MMC_STAT_END_OF_DATA) {
+ end_transfer = 1;
+ }
+
+ if (status & OMAP_MMC_STAT_DATA_TOUT) {
+ dev_dbg(mmc_dev(host->mmc), "data timeout\n");
+ if (host->data) {
+ host->data->error |= MMC_ERR_TIMEOUT;
+ transfer_error = 1;
+ }
+ }
+
+ if (status & OMAP_MMC_STAT_DATA_CRC) {
+ if (host->data) {
+ host->data->error |= MMC_ERR_BADCRC;
+ dev_dbg(mmc_dev(host->mmc),
+ "data CRC error, bytes left %d\n",
+ host->total_bytes_left);
+ transfer_error = 1;
+ } else {
+ dev_dbg(mmc_dev(host->mmc), "data CRC error\n");
+ }
+ }
+
+ if (status & OMAP_MMC_STAT_CMD_TOUT) {
+ /* Timeouts are routine with some commands */
+ if (host->cmd) {
+ if (host->cmd->opcode != MMC_ALL_SEND_CID &&
+ host->cmd->opcode !=
+ MMC_SEND_OP_COND &&
+ host->cmd->opcode !=
+ MMC_APP_CMD &&
+ !mmc_omap_cover_is_open(host))
+ dev_err(mmc_dev(host->mmc),
+ "command timeout, CMD %d\n",
+ host->cmd->opcode);
+ host->cmd->error = MMC_ERR_TIMEOUT;
+ end_command = 1;
+ }
+ }
+
+ if (status & OMAP_MMC_STAT_CMD_CRC) {
+ if (host->cmd) {
+ dev_err(mmc_dev(host->mmc),
+ "command CRC error (CMD%d, arg 0x%08x)\n",
+ host->cmd->opcode, host->cmd->arg);
+ host->cmd->error = MMC_ERR_BADCRC;
+ end_command = 1;
+ } else
+ dev_err(mmc_dev(host->mmc),
+ "command CRC error without cmd?\n");
+ }
+
+ if (status & OMAP_MMC_STAT_CARD_ERR) {
+ if (host->cmd && host->cmd->opcode == MMC_STOP_TRANSMISSION) {
+ u32 response = OMAP_MMC_READ(host->base, RSP6)
+ | (OMAP_MMC_READ(host->base, RSP7) << 16);
+ /* STOP sometimes sets must-ignore bits */
+ if (!(response & (R1_CC_ERROR
+ | R1_ILLEGAL_COMMAND
+ | R1_COM_CRC_ERROR))) {
+ end_command = 1;
+ continue;
+ }
+ }
+
+ dev_dbg(mmc_dev(host->mmc), "card status error (CMD%d)\n",
+ host->cmd->opcode);
+ if (host->cmd) {
+ host->cmd->error = MMC_ERR_FAILED;
+ end_command = 1;
+ }
+ if (host->data) {
+ host->data->error = MMC_ERR_FAILED;
+ transfer_error = 1;
+ }
+ }
+
+ /*
+ * NOTE: On 1610 the END_OF_CMD may come too early when
+ * starting a write
+ */
+ if ((status & OMAP_MMC_STAT_END_OF_CMD) &&
+ (!(status & OMAP_MMC_STAT_A_EMPTY))) {
+ end_command = 1;
+ }
+ }
+
+ if (end_command) {
+ mmc_omap_cmd_done(host, host->cmd);
+ }
+ if (transfer_error)
+ mmc_omap_xfer_done(host, host->data);
+ else if (end_transfer)
+ mmc_omap_end_of_data(host, host->data);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mmc_omap_switch_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct mmc_omap_host *host = (struct mmc_omap_host *) dev_id;
+
+ schedule_work(&host->switch_work);
+
+ return IRQ_HANDLED;
+}
+
+static void mmc_omap_switch_timer(unsigned long arg)
+{
+ struct mmc_omap_host *host = (struct mmc_omap_host *) arg;
+
+ schedule_work(&host->switch_work);
+}
+
+/* FIXME: Handle card insertion and removal properly. Maybe use a mask
+ * for MMC state? */
+static void mmc_omap_switch_callback(unsigned long data, u8 mmc_mask)
+{
+}
+
+static void mmc_omap_switch_handler(void *data)
+{
+ struct mmc_omap_host *host = (struct mmc_omap_host *) data;
+ struct mmc_card *card;
+ static int complained = 0;
+ int cards = 0, cover_open;
+
+ if (host->switch_pin == -1)
+ return;
+ cover_open = mmc_omap_cover_is_open(host);
+ if (cover_open != host->switch_last_state) {
+ kobject_uevent(&host->dev->kobj, KOBJ_CHANGE);
+ host->switch_last_state = cover_open;
+ }
+ mmc_detect_change(host->mmc, 0);
+ list_for_each_entry(card, &host->mmc->cards, node) {
+ if (mmc_card_present(card))
+ cards++;
+ }
+ if (mmc_omap_cover_is_open(host)) {
+ if (!complained) {
+ dev_info(mmc_dev(host->mmc), "cover is open");
+ complained = 1;
+ }
+ if (mmc_omap_enable_poll)
+ mod_timer(&host->switch_timer, jiffies +
+ msecs_to_jiffies(OMAP_MMC_SWITCH_POLL_DELAY));
+ } else {
+ complained = 0;
+ }
+}
+
+/* Prepare to transfer the next segment of a scatterlist */
+static void
+mmc_omap_prepare_dma(struct mmc_omap_host *host, struct mmc_data *data)
+{
+ int dma_ch = host->dma_ch;
+ unsigned long data_addr;
+ u16 buf, frame;
+ u32 count;
+ struct scatterlist *sg = &data->sg[host->sg_idx];
+ int src_port = 0;
+ int dst_port = 0;
+ int sync_dev = 0;
+
+ data_addr = io_v2p((u32) host->base) + OMAP_MMC_REG_DATA;
+ frame = 1 << data->blksz_bits;
+ count = sg_dma_len(sg);
+
+ if ((data->blocks == 1) && (count > (1 << data->blksz_bits)))
+ count = frame;
+
+ host->dma_len = count;
+
+ /* FIFO is 16x2 bytes on 15xx, and 32x2 bytes on 16xx and 24xx.
+ * Use 16 or 32 word frames when the blocksize is at least that large.
+ * Blocksize is usually 512 bytes; but not for some SD reads.
+ */
+ if (cpu_is_omap15xx() && frame > 32)
+ frame = 32;
+ else if (frame > 64)
+ frame = 64;
+ count /= frame;
+ frame >>= 1;
+
+ if (!(data->flags & MMC_DATA_WRITE)) {
+ buf = 0x800f | ((frame - 1) << 8);
+
+ if (cpu_class_is_omap1()) {
+ src_port = OMAP_DMA_PORT_TIPB;
+ dst_port = OMAP_DMA_PORT_EMIFF;
+ }
+ if (cpu_is_omap24xx())
+ sync_dev = OMAP24XX_DMA_MMC1_RX;
+
+ omap_set_dma_src_params(dma_ch, src_port,
+ OMAP_DMA_AMODE_CONSTANT,
+ data_addr, 0, 0);
+ omap_set_dma_dest_params(dma_ch, dst_port,
+ OMAP_DMA_AMODE_POST_INC,
+ sg_dma_address(sg), 0, 0);
+ omap_set_dma_dest_data_pack(dma_ch, 1);
+ omap_set_dma_dest_burst_mode(dma_ch, OMAP_DMA_DATA_BURST_4);
+ } else {
+ buf = 0x0f80 | ((frame - 1) << 0);
+
+ if (cpu_class_is_omap1()) {
+ src_port = OMAP_DMA_PORT_EMIFF;
+ dst_port = OMAP_DMA_PORT_TIPB;
+ }
+ if (cpu_is_omap24xx())
+ sync_dev = OMAP24XX_DMA_MMC1_TX;
+
+ omap_set_dma_dest_params(dma_ch, dst_port,
+ OMAP_DMA_AMODE_CONSTANT,
+ data_addr, 0, 0);
+ omap_set_dma_src_params(dma_ch, src_port,
+ OMAP_DMA_AMODE_POST_INC,
+ sg_dma_address(sg), 0, 0);
+ omap_set_dma_src_data_pack(dma_ch, 1);
+ omap_set_dma_src_burst_mode(dma_ch, OMAP_DMA_DATA_BURST_4);
+ }
+
+ /* Max limit for DMA frame count is 0xffff */
+ if (unlikely(count > 0xffff))
+ BUG();
+
+ OMAP_MMC_WRITE(host->base, BUF, buf);
+ omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S16,
+ frame, count, OMAP_DMA_SYNC_FRAME,
+ sync_dev, 0);
+}
+
+/* A scatterlist segment completed */
+static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data)
+{
+ struct mmc_omap_host *host = (struct mmc_omap_host *) data;
+ struct mmc_data *mmcdat = host->data;
+
+ if (unlikely(host->dma_ch < 0)) {
+ dev_err(mmc_dev(host->mmc), "DMA callback while DMA not
+ enabled\n");
+ return;
+ }
+ /* FIXME: We really should do something to _handle_ the errors */
+ if (ch_status & OMAP_DMA_TOUT_IRQ) {
+ dev_err(mmc_dev(host->mmc),"DMA timeout\n");
+ return;
+ }
+ if (ch_status & OMAP_DMA_DROP_IRQ) {
+ dev_err(mmc_dev(host->mmc), "DMA sync error\n");
+ return;
+ }
+ if (!(ch_status & OMAP_DMA_BLOCK_IRQ)) {
+ return;
+ }
+ mmcdat->bytes_xfered += host->dma_len;
+ host->sg_idx++;
+ if (host->sg_idx < host->sg_len) {
+ mmc_omap_prepare_dma(host, host->data);
+ omap_start_dma(host->dma_ch);
+ } else
+ mmc_omap_dma_done(host, host->data);
+}
+
+static int mmc_omap_get_dma_channel(struct mmc_omap_host *host, struct mmc_data *data)
+{
+ const char *dev_name;
+ int sync_dev, dma_ch, is_read, r;
+
+ is_read = !(data->flags & MMC_DATA_WRITE);
+ del_timer_sync(&host->dma_timer);
+ if (host->dma_ch >= 0) {
+ if (is_read == host->dma_is_read)
+ return 0;
+ omap_free_dma(host->dma_ch);
+ host->dma_ch = -1;
+ }
+
+ if (is_read) {
+ if (host->id == 1) {
+ sync_dev = OMAP_DMA_MMC_RX;
+ dev_name = "MMC1 read";
+ } else {
+ sync_dev = OMAP_DMA_MMC2_RX;
+ dev_name = "MMC2 read";
+ }
+ } else {
+ if (host->id == 1) {
+ sync_dev = OMAP_DMA_MMC_TX;
+ dev_name = "MMC1 write";
+ } else {
+ sync_dev = OMAP_DMA_MMC2_TX;
+ dev_name = "MMC2 write";
+ }
+ }
+ r = omap_request_dma(sync_dev, dev_name, mmc_omap_dma_cb,
+ host, &dma_ch);
+ if (r != 0) {
+ dev_dbg(mmc_dev(host->mmc), "omap_request_dma() failed with %d\n", r);
+ return r;
+ }
+ host->dma_ch = dma_ch;
+ host->dma_is_read = is_read;
+
+ return 0;
+}
+
+static inline void set_cmd_timeout(struct mmc_omap_host *host, struct mmc_request *req)
+{
+ u16 reg;
+
+ reg = OMAP_MMC_READ(host->base, SDIO);
+ reg &= ~(1 << 5);
+ OMAP_MMC_WRITE(host->base, SDIO, reg);
+ /* Set maximum timeout */
+ OMAP_MMC_WRITE(host->base, CTO, 0xff);
+}
+
+static inline void set_data_timeout(struct mmc_omap_host *host, struct mmc_request *req)
+{
+ int timeout;
+ u16 reg;
+
+ /* Convert ns to clock cycles by assuming 20MHz frequency
+ * 1 cycle at 20MHz = 500 ns
+ */
+ timeout = req->data->timeout_clks + req->data->timeout_ns / 500;
+
+ /* Check if we need to use timeout multiplier register */
+ reg = OMAP_MMC_READ(host->base, SDIO);
+ if (timeout > 0xffff) {
+ reg |= (1 << 5);
+ timeout /= 1024;
+ } else
+ reg &= ~(1 << 5);
+ OMAP_MMC_WRITE(host->base, SDIO, reg);
+ OMAP_MMC_WRITE(host->base, DTO, timeout);
+}
+
+static void
+mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req)
+{
+ struct mmc_data *data = req->data;
+ int i, use_dma, block_size;
+ unsigned sg_len;
+
+ host->data = data;
+ if (data == NULL) {
+ OMAP_MMC_WRITE(host->base, BLEN, 0);
+ OMAP_MMC_WRITE(host->base, NBLK, 0);
+ OMAP_MMC_WRITE(host->base, BUF, 0);
+ host->dma_in_use = 0;
+ set_cmd_timeout(host, req);
+ return;
+ }
+
+
+ block_size = 1 << data->blksz_bits;
+
+ OMAP_MMC_WRITE(host->base, NBLK, data->blocks - 1);
+ OMAP_MMC_WRITE(host->base, BLEN, block_size - 1);
+ set_data_timeout(host, req);
+
+ /* cope with calling layer confusion; it issues "single
+ * block" writes using multi-block scatterlists.
+ */
+ sg_len = (data->blocks == 1) ? 1 : data->sg_len;
+
+ /* Only do DMA for entire blocks */
+ use_dma = host->use_dma;
+ if (use_dma) {
+ for (i = 0; i < sg_len; i++) {
+ if ((data->sg[i].length % block_size) != 0) {
+ use_dma = 0;
+ break;
+ }
+ }
+ }
+
+ host->sg_idx = 0;
+ if (use_dma) {
+ if (mmc_omap_get_dma_channel(host, data) == 0) {
+ enum dma_data_direction dma_data_dir;
+
+ if (data->flags & MMC_DATA_WRITE)
+ dma_data_dir = DMA_TO_DEVICE;
+ else
+ dma_data_dir = DMA_FROM_DEVICE;
+
+ host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg,
+ sg_len, dma_data_dir);
+ host->total_bytes_left = 0;
+ mmc_omap_prepare_dma(host, req->data);
+ host->brs_received = 0;
+ host->dma_done = 0;
+ host->dma_in_use = 1;
+ } else
+ use_dma = 0;
+ }
+
+ /* Revert to PIO? */
+ if (!use_dma) {
+ OMAP_MMC_WRITE(host->base, BUF, 0x1f1f);
+ host->total_bytes_left = data->blocks * block_size;
+ host->sg_len = sg_len;
+ mmc_omap_sg_to_buf(host);
+ host->dma_in_use = 0;
+ }
+}
+
+static void mmc_omap_request(struct mmc_host *mmc, struct mmc_request *req)
+{
+ struct mmc_omap_host *host = mmc_priv(mmc);
+
+ WARN_ON(host->mrq != NULL);
+
+ host->mrq = req;
+
+ /* only touch fifo AFTER the controller readies it */
+ mmc_omap_prepare_data(host, req);
+ mmc_omap_start_command(host, req->cmd);
+ if (host->dma_in_use)
+ omap_start_dma(host->dma_ch);
+}
+
+static void innovator_fpga_socket_power(int on)
+{
+#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX)
+
+ if (on) {
+ fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3),
+ OMAP1510_FPGA_POWER);
+ } else {
+ fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3),
+ OMAP1510_FPGA_POWER);
+ }
+#endif
+}
+
+/*
+ * Turn the socket power on/off. Innovator uses FPGA, most boards
+ * probably use GPIO.
+ */
+static void mmc_omap_power(struct mmc_omap_host *host, int on)
+{
+ if (on) {
+ if (machine_is_omap_innovator())
+ innovator_fpga_socket_power(1);
+ else if (machine_is_omap_h2())
+ tps65010_set_gpio_out_value(GPIO3, HIGH);
+ else if (machine_is_omap_h3())
+ /* GPIO 4 of TPS65010 sends SD_EN signal */
+ tps65010_set_gpio_out_value(GPIO4, HIGH);
+ else if (cpu_is_omap24xx()) {
+ u16 reg = OMAP_MMC_READ(host->base, CON);
+ OMAP_MMC_WRITE(host->base, CON, reg | (1 << 11));
+ } else
+ if (host->power_pin >= 0)
+ omap_set_gpio_dataout(host->power_pin, 1);
+ } else {
+ if (machine_is_omap_innovator())
+ innovator_fpga_socket_power(0);
+ else if (machine_is_omap_h2())
+ tps65010_set_gpio_out_value(GPIO3, LOW);
+ else if (machine_is_omap_h3())
+ tps65010_set_gpio_out_value(GPIO4, LOW);
+ else if (cpu_is_omap24xx()) {
+ u16 reg = OMAP_MMC_READ(host->base, CON);
+ OMAP_MMC_WRITE(host->base, CON, reg & ~(1 << 11));
+ } else
+ if (host->power_pin >= 0)
+ omap_set_gpio_dataout(host->power_pin, 0);
+ }
+}
+
+static void mmc_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct mmc_omap_host *host = mmc_priv(mmc);
+ int dsor;
+ int realclock, i;
+
+ realclock = ios->clock;
+
+ if (ios->clock == 0)
+ dsor = 0;
+ else {
+ int func_clk_rate = clk_get_rate(host->fclk);
+
+ dsor = func_clk_rate / realclock;
+ if (dsor < 1)
+ dsor = 1;
+
+ if (func_clk_rate / dsor > realclock)
+ dsor++;
+
+ if (dsor > 250)
+ dsor = 250;
+ dsor++;
+
+ if (ios->bus_width == MMC_BUS_WIDTH_4)
+ dsor |= 1 << 15;
+ }
+
+ switch (ios->power_mode) {
+ case MMC_POWER_OFF:
+ mmc_omap_power(host, 0);
+ break;
+ case MMC_POWER_UP:
+ case MMC_POWER_ON:
+ mmc_omap_power(host, 1);
+ dsor |= 1<<11;
+ break;
+ }
+
+ host->bus_mode = ios->bus_mode;
+ host->hw_bus_mode = host->bus_mode;
+
+ clk_enable(host->fclk);
+
+ /* On insanely high arm_per frequencies something sometimes
+ * goes somehow out of sync, and the POW bit is not being set,
+ * which results in the while loop below getting stuck.
+ * Writing to the CON register twice seems to do the trick. */
+ for (i = 0; i < 2; i++)
+ OMAP_MMC_WRITE(host->base, CON, dsor);
+ if (ios->power_mode == MMC_POWER_UP) {
+ /* Send clock cycles, poll completion */
+ OMAP_MMC_WRITE(host->base, IE, 0);
+ OMAP_MMC_WRITE(host->base, STAT, 0xffff);
+ OMAP_MMC_WRITE(host->base, CMD, 1<<7);
+ while (0 == (OMAP_MMC_READ(host->base, STAT) & 1));
+ OMAP_MMC_WRITE(host->base, STAT, 1);
+ }
+ clk_disable(host->fclk);
+}
+
+static int mmc_omap_get_ro(struct mmc_host *mmc)
+{
+ struct mmc_omap_host *host = mmc_priv(mmc);
+
+ return host->wp_pin && omap_get_gpio_datain(host->wp_pin);
+}
+
+static struct mmc_host_ops mmc_omap_ops = {
+ .request = mmc_omap_request,
+ .set_ios = mmc_omap_set_ios,
+ .get_ro = mmc_omap_get_ro,
+};
+
+static int __init mmc_omap_probe(struct platform_device *pdev)
+{
+ struct omap_mmc_conf *minfo = pdev->dev.platform_data;
+ struct mmc_host *mmc;
+ struct mmc_omap_host *host = NULL;
+ int ret = 0;
+
+ if (platform_get_resource(pdev, IORESOURCE_MEM, 0) ||
+ platform_get_irq(pdev, IORESOURCE_IRQ, 0)) {
+ dev_err(&pdev->dev, "mmc_omap_probe: invalid resource type\n");
+ return -ENODEV;
+ }
+
+ if (!request_mem_region(pdev->resource[0].start,
+ pdev->resource[0].end - pdev->resource[0].start + 1,
+ pdev->name)) {
+ dev_dbg(&pdev->dev, "request_mem_region failed\n");
+ return -EBUSY;
+ }
+
+ mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev);
+ if (!mmc) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+
+ spin_lock_init(&host->dma_lock);
+ init_timer(&host->dma_timer);
+ host->dma_timer.function = mmc_omap_dma_timer;
+ host->dma_timer.data = (unsigned long) host;
+
+ host->id = pdev->id;
+
+ if (cpu_is_omap24xx()) {
+ host->iclk = clk_get(&pdev->dev, "mmc_ick");
+ if (IS_ERR(host->iclk))
+ goto out;
+ clk_enable(host->iclk);
+ }
+
+ if (!cpu_is_omap24xx())
+ host->fclk = clk_get(&pdev->dev, "mmc_ck");
+ else
+ host->fclk = clk_get(&pdev->dev, "mmc_fck");
+
+ if (IS_ERR(host->fclk)) {
+ ret = PTR_ERR(host->fclk);
+ goto out;
+ }
+
+ /* REVISIT:
+ * Also, use minfo->cover to decide how to manage
+ * the card detect sensing.
+ */
+ host->power_pin = minfo->power_pin;
+ host->switch_pin = minfo->switch_pin;
+ host->wp_pin = minfo->wp_pin;
+ host->use_dma = 1;
+ host->dma_ch = -1;
+
+ host->irq = pdev->resource[1].start;
+ host->base = ioremap(pdev->res.start, SZ_4K);
+ if (!host->base) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ if (minfo->wire4)
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+ mmc->ops = &mmc_omap_ops;
+ mmc->f_min = 400000;
+ mmc->f_max = 24000000;
+ mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
+
+ /* Use scatterlist DMA to reduce per-transfer costs.
+ * NOTE max_seg_size assumption that small blocks aren't
+ * normally used (except e.g. for reading SD registers).
+ */
+ mmc->max_phys_segs = 32;
+ mmc->max_hw_segs = 32;
+ mmc->max_sectors = 256; /* NBLK max 11-bits, OMAP also limited by DMA */
+ mmc->max_seg_size = mmc->max_sectors * 512;
+
+ if (host->power_pin >= 0) {
+ if ((ret = omap_request_gpio(host->power_pin)) != 0) {
+ dev_err(mmc_dev(host->mmc), "Unable to get GPIO
+ pin for MMC power\n");
+ goto out;
+ }
+ omap_set_gpio_direction(host->power_pin, 0);
+ }
+
+ ret = request_irq(host->irq, mmc_omap_irq, 0, DRIVER_NAME, host);
+ if (ret)
+ goto out;
+
+ host->dev = &pdev->dev;
+ platform_set_drvdata(pdev, host);
+
+ mmc_add_host(mmc);
+
+ if (host->switch_pin >= 0) {
+ INIT_WORK(&host->switch_work, mmc_omap_switch_handler, host);
+ init_timer(&host->switch_timer);
+ host->switch_timer.function = mmc_omap_switch_timer;
+ host->switch_timer.data = (unsigned long) host;
+ if (omap_request_gpio(host->switch_pin) != 0) {
+ dev_warn(mmc_dev(host->mmc), "Unable to get GPIO pin for MMC cover switch\n");
+ host->switch_pin = -1;
+ goto no_switch;
+ }
+
+ omap_set_gpio_direction(host->switch_pin, 1);
+ ret = request_irq(OMAP_GPIO_IRQ(host->switch_pin),
+ mmc_omap_switch_irq, SA_TRIGGER_RISING, DRIVER_NAME, host);
+ if (ret) {
+ dev_warn(mmc_dev(host->mmc), "Unable to get IRQ for MMC cover switch\n");
+ omap_free_gpio(host->switch_pin);
+ host->switch_pin = -1;
+ goto no_switch;
+ }
+ ret = device_create_file(&pdev->dev, &dev_attr_cover_switch);
+ if (ret == 0) {
+ ret = device_create_file(&pdev->dev, &dev_attr_enable_poll);
+ if (ret != 0)
+ device_remove_file(&pdev->dev, &dev_attr_cover_switch);
+ }
+ if (ret) {
+ dev_wan(mmc_dev(host->mmc), "Unable to create sysfs attributes\n");
+ free_irq(OMAP_GPIO_IRQ(host->switch_pin), host);
+ omap_free_gpio(host->switch_pin);
+ host->switch_pin = -1;
+ goto no_switch;
+ }
+ if (mmc_omap_enable_poll && mmc_omap_cover_is_open(host))
+ schedule_work(&host->switch_work);
+ }
+
+no_switch:
+ return 0;
+
+out:
+ /* FIXME: Free other resources too. */
+ if (host) {
+ if (host->iclk && !IS_ERR(host->iclk))
+ clk_put(host->iclk);
+ if (host->fclk && !IS_ERR(host->fclk))
+ clk_put(host->fclk);
+ mmc_free_host(host->mmc);
+ }
+ return ret;
+}
+
+static int mmc_omap_remove(struct platform_device *pdev)
+{
+ struct mmc_omap_host *host = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ if (host) {
+ mmc_remove_host(host->mmc);
+ free_irq(host->irq, host);
+
+ if (host->power_pin >= 0)
+ omap_free_gpio(host->power_pin);
+ if (host->switch_pin >= 0) {
+ device_remove_file(&pdev->dev, &dev_attr_enable_poll);
+ device_remove_file(&pdev->dev, &dev_attr_cover_switch);
+ free_irq(OMAP_GPIO_IRQ(host->switch_pin), host);
+ omap_free_gpio(host->switch_pin);
+ host->switch_pin = -1;
+ del_timer_sync(&host->switch_timer);
+ flush_scheduled_work();
+ }
+ if (host->iclk && !IS_ERR(host->iclk))
+ clk_put(host->iclk);
+ if (host->fclk && !IS_ERR(host->fclk))
+ clk_put(host->fclk);
+ mmc_free_host(host->mmc);
+ }
+
+ release_mem_region(pdev->resource[0].start,
+ pdev->resource[0].end - pdev->resource[0].start + 1);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int mmc_omap_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+ int ret = 0;
+ struct mmc_omap_host *host = platform_get_drvdata(pdev);
+
+ if (host && host->suspended)
+ return 0;
+
+ if (host) {
+ ret = mmc_suspend_host(host->mmc, mesg);
+ if (ret == 0)
+ host->suspended = 1;
+ }
+ return ret;
+}
+
+static int mmc_omap_resume(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct mmc_omap_host *host = platform_get_drvdata(pdev);
+
+ if (host && !host->suspended)
+ return 0;
+
+ if (host) {
+ ret = mmc_resume_host(host->mmc);
+ if (ret == 0)
+ host->suspended = 0;
+ }
+
+ return ret;
+}
+#else
+#define mmc_omap_suspend NULL
+#define mmc_omap_resume NULL
+#endif
+
+static struct platform_driver mmc_omap_driver = {
+ .probe = mmc_omap_probe,
+ .remove = mmc_omap_remove,
+ .suspend = mmc_omap_suspend,
+ .resume = mmc_omap_resume,
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+};
+
+static int __init mmc_omap_init(void)
+{
+ return platform_driver_register(&mmc_omap_driver);
+}
+
+static void __exit mmc_omap_exit(void)
+{
+ platform_driver_unregister(&mmc_omap_driver);
+}
+
+module_init(mmc_omap_init);
+module_exit(mmc_omap_exit);
+
+MODULE_DESCRIPTION("OMAP Multimedia Card driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS(DRIVER_NAME);
+MODULE_AUTHOR("Juha Yrjölä");
diff --git a/drivers/mmc/omap.h b/drivers/mmc/omap.h
new file mode 100644
index 0000000..c954d35
--- /dev/null
+++ b/drivers/mmc/omap.h
@@ -0,0 +1,55 @@
+#ifndef DRIVERS_MEDIA_MMC_OMAP_H
+#define DRIVERS_MEDIA_MMC_OMAP_H
+
+#define OMAP_MMC_REG_CMD 0x00
+#define OMAP_MMC_REG_ARGL 0x04
+#define OMAP_MMC_REG_ARGH 0x08
+#define OMAP_MMC_REG_CON 0x0c
+#define OMAP_MMC_REG_STAT 0x10
+#define OMAP_MMC_REG_IE 0x14
+#define OMAP_MMC_REG_CTO 0x18
+#define OMAP_MMC_REG_DTO 0x1c
+#define OMAP_MMC_REG_DATA 0x20
+#define OMAP_MMC_REG_BLEN 0x24
+#define OMAP_MMC_REG_NBLK 0x28
+#define OMAP_MMC_REG_BUF 0x2c
+#define OMAP_MMC_REG_SDIO 0x34
+#define OMAP_MMC_REG_REV 0x3c
+#define OMAP_MMC_REG_RSP0 0x40
+#define OMAP_MMC_REG_RSP1 0x44
+#define OMAP_MMC_REG_RSP2 0x48
+#define OMAP_MMC_REG_RSP3 0x4c
+#define OMAP_MMC_REG_RSP4 0x50
+#define OMAP_MMC_REG_RSP5 0x54
+#define OMAP_MMC_REG_RSP6 0x58
+#define OMAP_MMC_REG_RSP7 0x5c
+#define OMAP_MMC_REG_IOSR 0x60
+#define OMAP_MMC_REG_SYSC 0x64
+#define OMAP_MMC_REG_SYSS 0x68
+
+#define OMAP_MMC_STAT_CARD_ERR (1 << 14)
+#define OMAP_MMC_STAT_CARD_IRQ (1 << 13)
+#define OMAP_MMC_STAT_OCR_BUSY (1 << 12)
+#define OMAP_MMC_STAT_A_EMPTY (1 << 11)
+#define OMAP_MMC_STAT_A_FULL (1 << 10)
+#define OMAP_MMC_STAT_CMD_CRC (1 << 8)
+#define OMAP_MMC_STAT_CMD_TOUT (1 << 7)
+#define OMAP_MMC_STAT_DATA_CRC (1 << 6)
+#define OMAP_MMC_STAT_DATA_TOUT (1 << 5)
+#define OMAP_MMC_STAT_END_BUSY (1 << 4)
+#define OMAP_MMC_STAT_END_OF_DATA (1 << 3)
+#define OMAP_MMC_STAT_CARD_BUSY (1 << 2)
+#define OMAP_MMC_STAT_END_OF_CMD (1 << 0)
+
+#define OMAP_MMC_READ(base, reg) __raw_readw((base) + OMAP_MMC_REG_##reg)
+#define OMAP_MMC_WRITE(base, reg, val) __raw_writew((val), (base) + OMAP_MMC_REG_##reg)
+
+/*
+ * Command types
+ */
+#define OMAP_MMC_CMDTYPE_BC 0
+#define OMAP_MMC_CMDTYPE_BCR 1
+#define OMAP_MMC_CMDTYPE_AC 2
+#define OMAP_MMC_CMDTYPE_ADTC 3
+
+#endif