regulator: Support MAX8998/LP3974 DVS-GPIO
The previous driver did not support BUCK1-DVS3, BUCK1-DVS4, and
BUCK2-DVS2 modes. This patch adds such modes and an option to block
setting buck1/2 voltages out of the preset values.
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index af52ebf..0ec49ca 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -424,6 +424,9 @@
}
}
+ if (pdata->buck_voltage_lock)
+ return -EINVAL;
+
/* no predefine regulator found */
max8998->buck1_idx = (buck1_last_val % 2) + 2;
dev_dbg(max8998->dev, "max8998->buck1_idx:%d\n",
@@ -451,18 +454,26 @@
"BUCK2, i:%d buck2_vol1:%d, buck2_vol2:%d\n"
, i, max8998->buck2_vol[0], max8998->buck2_vol[1]);
if (gpio_is_valid(pdata->buck2_set3)) {
- if (max8998->buck2_vol[0] == i) {
- max8998->buck1_idx = 0;
- buck2_gpio_set(pdata->buck2_set3, 0);
- } else {
- max8998->buck1_idx = 1;
- ret = max8998_get_voltage_register(rdev, ®,
- &shift,
- &mask);
- ret = max8998_write_reg(i2c, reg, i);
- max8998->buck2_vol[1] = i;
- buck2_gpio_set(pdata->buck2_set3, 1);
+
+ /* check if requested voltage */
+ /* value is already defined */
+ for (j = 0; j < ARRAY_SIZE(max8998->buck2_vol); j++) {
+ if (max8998->buck2_vol[j] == i) {
+ max8998->buck2_idx = j;
+ buck2_gpio_set(pdata->buck2_set3, j);
+ goto buck2_exit;
+ }
}
+
+ if (pdata->buck_voltage_lock)
+ return -EINVAL;
+
+ max8998_get_voltage_register(rdev,
+ ®, &shift, &mask);
+ ret = max8998_write_reg(i2c, reg, i);
+ max8998->buck2_vol[max8998->buck2_idx] = i;
+ buck2_gpio_set(pdata->buck2_set3, max8998->buck2_idx);
+buck2_exit:
dev_dbg(max8998->dev, "%s: SET3:%d\n", i2c->name,
gpio_get_value(pdata->buck2_set3));
} else {
@@ -707,6 +718,9 @@
platform_set_drvdata(pdev, max8998);
i2c = max8998->iodev->i2c;
+ max8998->buck1_idx = pdata->buck1_default_idx;
+ max8998->buck2_idx = pdata->buck2_default_idx;
+
/* NOTE: */
/* For unused GPIO NOT marked as -1 (thereof equal to 0) WARN_ON */
/* will be displayed */
@@ -739,23 +753,46 @@
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
- != (pdata->buck1_max_voltage1 / 1000))
+ < (pdata->buck1_voltage1 / 1000))
i++;
- printk(KERN_ERR "i:%d, buck1_idx:%d\n", i, max8998->buck1_idx);
max8998->buck1_vol[0] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE1, i);
+ if (ret)
+ return ret;
/* Set predefined value for BUCK1 register 2 */
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
- != (pdata->buck1_max_voltage2 / 1000))
+ < (pdata->buck1_voltage2 / 1000))
i++;
max8998->buck1_vol[1] = i;
- printk(KERN_ERR "i:%d, buck1_idx:%d\n", i, max8998->buck1_idx);
- ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE2, i)
- + ret;
+ ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE2, i);
+ if (ret)
+ return ret;
+
+ /* Set predefined value for BUCK1 register 3 */
+ i = 0;
+ while (buck12_voltage_map_desc.min +
+ buck12_voltage_map_desc.step*i
+ < (pdata->buck1_voltage3 / 1000))
+ i++;
+
+ max8998->buck1_vol[2] = i;
+ ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE3, i);
+ if (ret)
+ return ret;
+
+ /* Set predefined value for BUCK1 register 4 */
+ i = 0;
+ while (buck12_voltage_map_desc.min +
+ buck12_voltage_map_desc.step*i
+ < (pdata->buck1_voltage4 / 1000))
+ i++;
+
+ max8998->buck1_vol[3] = i;
+ ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE4, i);
if (ret)
return ret;
@@ -772,18 +809,28 @@
gpio_direction_output(pdata->buck2_set3,
max8998->buck2_idx & 0x1);
- /* BUCK2 - set preset default voltage value to buck2_vol[0] */
+ /* BUCK2 register 1 */
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
- != (pdata->buck2_max_voltage / 1000))
+ < (pdata->buck2_voltage1 / 1000))
i++;
- printk(KERN_ERR "i:%d, buck2_idx:%d\n", i, max8998->buck2_idx);
max8998->buck2_vol[0] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE1, i);
if (ret)
return ret;
+ /* BUCK2 register 2 */
+ i = 0;
+ while (buck12_voltage_map_desc.min +
+ buck12_voltage_map_desc.step*i
+ < (pdata->buck2_voltage2 / 1000))
+ i++;
+ printk(KERN_ERR "i2:%d, buck2_idx:%d\n", i, max8998->buck2_idx);
+ max8998->buck2_vol[1] = i;
+ ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE2, i);
+ if (ret)
+ return ret;
}
for (i = 0; i < pdata->num_regulators; i++) {